BULLETIN NO.

SERVICE PARTS LIST 54-00-2736

SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS REVISED BULLETIN DATE
Oct. 2020
M18™ FUEL™ ONE KEY 8.25" TABLE SAW
WIRING INSTRUCTION
SERIAL
CATALOG NO. 2736-20 NUMBER J35A

TABLE TOP and RAIL ASSY. Page 2

FRAME and PANEL ASSY. Page 3
DUST COLLECTION ASSY. Page 4
GEARCASE and MOTOR ASSY. Page 5
ATTACHMENTS/ACCESSORIES Page 6
TORQUE SPECIFICATIONS Page 7

Electronics Servicing for Milwaukee Electric Tool ONE KEY Products

can only be performed at this
Milwaukee factory Central Repair Center:

MILWAUKEE ELECTRIC TOOL Central Repair

1401 Sycamore Avenue l Greenwood, MS 38930

Please send your tool directly to this location for service.

Or
Via e-Service at: www.milwaukeetool.com/e-service
questions, please call 1.800.SAWDUST (1.800.729.3878)
Or
Return it to a MILWAUKEE factory Service Center location, freight prepaid and insured.
A copy of the proof of purchase should be included with the return product.

If you have questions please contact Milwaukee Product Service at:

Product Technical Support via phone at: 262.783.8642
Or
Via email at: METProductSupport @milwaukeetool.com

Disassembly of electronics package is not recommended and could void the warranty.
Drwg. 4
 TABLE TOP and RAIL ASSEMBLY

95 99 98
(4x) EXAMPLE:
00 0 Component Parts (Small #)
257 256 Are Included When Ordering
96 The Assembly (Large #).
Apply a drop of
Red Loctite® 277
270 91
96
92 93 94 95
98 99 256 257
to threads of 94
screw prior to
installation 93 266 84
85
91
92

81
82
85
63 (4x)
249 (8x)
88
90 (7)
(6x)

89 55
87 56
86 84 (2x)
54 (2x)
(2x) 53
57 (2x) 268 61
74
64
(2x) 61
48 64
LUBRICATION 51 65
50 66
= 277 Red Loctite,® 44-22-0325 49 (2x) (2x) 76
75
(2x) (2x)
77
271 47
53
48 49 50 51 52
54 55 56 57 58
47
(2x) 58 79
78
(2x) 52 74
(4x) 60
80 (3x) 62 2
59 (2x) 63 (2x)
FIG. PART NO. DESCRIPTION OF PART NO REQ. (4x) 68 (4x)
47 --------------- M10 Hex Nut with Nylon (2) 67
48 --------------- Fence Pinion Knob (1) 69
49 --------------- Fence Pinion Bushing (2) 73
50 --------------- Spring (2) 72
51 --------------- Fence Pinion Bushing Bracket (2) 267 67
77
68 72 73 74
78 79 80
(2x) 63
(4x)
70
52 --------------- M5 x 20mm Pan Hd. Sems T-25 w/Nylok (4)
53 --------------- Washer (2) 71
54 --------------- E-Ring (1)
55 --------------- Fence Pinion Shaft (1)
56 --------------- Spring Pin (2)
57 --------------- Fence Pinion Bearing Support (2) FIG. PART NO. DESCRIPTION OF PART NO REQ.
58 --------------- Fence Pinion (2) 85 --------------- Fence Rail Cushion (4)
59 45-88-0009 Washer (4) 86 44-81-0011 Sliding Fence Rail (2)
60 40-50-0131 Spring (2) 87 43-82-0011 Fence Length Indicator (1)
61 --------------- Latching Shaft (1) 88 06-54-0010 M6 Square Nut (7)
62 42-68-0012 Clamping Plate (2) 89 06-75-0011 M6 x 8mm Pan Hd. Washer Screw, S4 (1)
63 06-82-0074 M5 x 13mm Pan Hd. Sems T-25 w/Nylok (16) 90 06-75-0022 M6 x 6mm CWH Machine Screw, S4 (6)
64 --------------- Latching Adjustment Shaft (1) 91 42-50-0011 Throat Plate Cam (1)
65 06-55-0011 M6 Hex Nut (1) 92 05-89-0010 M4 x 14mm PWH T-20 Tapt. Screw (1)
66 44-40-0011 Latching Adjustment Nut (1) 93 40-50-0141 Spring (1)
67 --------------- Spring Pin (2) 94 44-66-0042 Throat Plate (1)
68 --------------- Latching Shaft and Plate (1) 95 06-83-0011 M5 x 8mm Set Screw, S2.5 (4)
69 43-62-0011 Fence Lock Handle (1) 96 43-98-0021 Throat Plate Attachment Knob (1)
70 45-88-0043 Washer (1) 98 --------------- Large Throat Plate Insert (1)
71 06-55-0006 M5 Hex Nut w/ Nylon (1) 99 --------------- Small Throat Plate Insert (1)
72 42-68-0013 Clamping Plate (2) 249 10-20-9007 Fence Length Indicator Label (1)
73 --------------- Latching Plate (1) 256 --------------- Double Sided Tape for Large Insert (1)
74 --------------- Rivet (3) 257 --------------- Double Sided Tape for Small Insert (1)
75 45-88-0044 Washer (2) 266 44-81-0012 Mounting Rail Kit (2)
76 40-50-0139 Spring (1) 267 44-20-0019 Fence Extension Latching Assembly 1 (1)
77 --------------- Latching Spring Shaft (1) 268 44-20-0022 Fence Extension Latching Assembly 2 (1)
78 --------------- Latching Plate (1) 270 14-67-0015 Throat Plate Assembly (1)
79 --------------- Rivet (1) 271 14-86-0010 Fence Pinion Bushing Assembly (2)
80 --------------- Latching Shaft (1)
81 45-64-0005 Table Top (1)
82 43-82-0010 Fence Ruler (1)
84 --------------- Fence Rail Mount (2)
 FRAME and PANEL ASSEMBLY

170
160 (4x)
170 (2x)
(3x)
190
254
169 171
173 (4x)
(2x)
174 189
(2x) (2x)
175
172
188 43
186
185 178
168
251 176
177

160
9 (3x)
152 153 154 179 (5x)
279 152
154
153
(2x) 180
9 179
181
171
(6x)
278 180
155 182 (2x)
(4x) 183
184
156 187
(4x)
160
157 (2x) 161
(4x) 163
(2x) 164
158
(4x) (2x)
71
(2x)

162

166
(8x) 3
165 166
280 167

165
252 (2x)
167
(2x)
159

FIG. PART NO. DESCRIPTION OF PART NO REQ. FIG. PART NO. DESCRIPTION OF PART NO REQ.
9 --------------- M4 x 18mm Pan Hd. ST T-20 Screw (5) 177 44-66-0067 Battery Plate (1)
43 05-81-0022 M4 x 10mm Pan Hd. ST T-20 Screw (1) 178 05-91-0005 External Tooth Spring Washer (1)
71 06-55-0006 M5 Hex Nut with Nylon (2) 179 --------------- Battery Housing Mount-Left (1)
152 --------------- Handle Halve A (1) 180 --------------- Battery Housing Mount-Right (1)
153 --------------- Handle Halve B (1) 181 06-82-0103 M3 x 6mm ST Screw (2)
154 --------------- M4 x 13.5mm Pan Hd. ST T-20 Screw (2) 182 23-27-0010 Magnet, Table Saw Switch Panel (1)
155 45-88-0046 Washer (4) 183 23-35-0010 Switch Panel (1)
156 42-40-0012 Rubber Bushing (4) 184 23-66-0014 Switch (1)
157 45-88-0047 Washer (4) 185 44-60-0091 Pin (1)
158 05-89-0011 M6 x 11mm Cap Hd. Machine Screw, S5 (4) 186 40-50-0156 Switch Cover Spring (1)
159 --------------- Frame (1) 187 42-92-0018 Switch Cover (1)
160 06-82-0093 M5 x 8mm Pan Hd. Tapt. T-25 Screw (7) 188 34-60-0022 E-Ring (1)
161 42-70-0026 Miter Gauge Clip (1) 189 06-82-0106 M3 x 10mm Pan Hd. ST T-10 Screw (2)
162 44-68-0011 16mm Plug (1) 190 42-92-0019 Side Cover Panel (1)
163 43-98-0017 Tool-Less Lever (2) 251 10-20-9003 Front Panel Label (1)
164 40-50-0151 Spring (2) 252 10-20-9004 Frame Label (1)
165 --------------- Foot Cover A (2) 254 12-20-0124 Service Nameplate (1)
166 --------------- M4 x 6mm Pan Hd. Tapt. T-20 Screw (8) 278 14-38-0036 Battery Housing Mount Kit (1)
167 --------------- Foot Cover B (2) 279 14-34-0021 Handle Kit (1)
168 10-20-1681 Bevel Angle Label (1) 280 42-38-0022 Foot Cover Kit (1)
169 42-92-0013 Front Cover Panel (1)
170 06-82-0096 M5 x 13mm Pan Hd. T-25 Mach. Screw (7)
171 06-82-0098 M5 x 10mm Pan Hd. ST T-20 Screw (10)
172 44-66-0066 Bevel Plate (1)
173 42-50-0012 Bevel Adjustment Cam (2)
174 06-82-0101 M5 x 8mm Cap Washer Hd. Screw, S4 (2)
175 43-72-0008 Relay Carrier (1)
176 42-92-0014 Electronic Cover (1)
 DUST COLLECTION ASSEMBLY 211

210
211 52
(6x) (4x) 214
191 181
(5x) (2x)
207 209
(2x) (2x) 215
253
208 213

212 224
204
200 191
199 206
192 198 (2x)
67 205
197 223
196
197
195 203 (2x)
202
193 201
220 (2x)
157 191 217
67 (3x) 218 (4x)
194 281 198 219 (4x) 235
221 (4x) (3x)
216 (4x)

NOTE:
When servicing gears
or gearcase, 90-95%
of old grease must be
removed prior to new grease 228 234
227 (3x)
being added. Clean gear ass- 53
emblies with clean, dry cloth. 226 233
225
LUBRICATION:
232
= Type ‘Y’ Grease, 49-08-5270 222
230
198 Apply a light film of grease to the 229
Height Adjustment Handle Shaft 191
231
as shown prior to installing onto (2x)
Dust Collection Casting.
4
204 Apply a liberal amount of grease 191
to Height Adjustment Bevel Gear-1 (4x)
being sure to coat all of the teeth. FIG. PART NO. DESCRIPTION OF PART NO REQ.
203 45-88-0051 Washer (1)
205 Apply a liberal amount of grease to the Height Adjustment Bevel
204 32-05-0012 Height Adjustment Bevel Gear-1 (1)
Gear-2, being sure to coat all of the teeth.
205 32-05-0013 Height Adjustment Bevel Gear-2 (1)
210 Apply a light coat of grease to the threads and shaft of the Height 206 42-28-0011 Height Adjustment Block (1)
Adjustment Screw. 207 06-75-0027 M5 x 24mm Cap Hd. Sems Screw, S4 (2)
208 45-88-0059 Wave Washer (1)
212 Place a light film of grease to entire Height Adjustment Shaft-A. 209 45-88-0060 Washer (1)
210 45-04-0011 Height Adjustment Screw (1)
213 Place a light film of grease to entire Height Adjustment Shaft-B. 211 06-82-0111 M5 x 10mm Pan Hd. T-25 Sems Screw (7)
212 45-08-0011 Height Adjustment Shaft-A (1)
220 Place a light coat of grease to the contact areas within the channel 213 45-08-0012 Height Adjustment Shaft-B (1)
of the Front Bevel Mechanism. 214 06-82-0113 M4 x 12mm Pan Hd. T-20 Mach. Screw (2)
215 42-92-0023 Riving Knife Dust Cover (1)
223 Place a light coat of grease to the contact areas within the channel 216 42-92-0022 Front Dust Cover (1)
of the Back Bevel Mechanism. 217 06-82-0107 M6 x 14mm Pan Hd. T-25 Mach. Screw (4)
218 05-91-0010 External Tooth Spring Washer (4)
219 44-60-0092 Spring Pin (4)
FIG. PART NO. DESCRIPTION OF PART NO REQ. 220 14-04-0005 Front Bevel Mechanism Assembly (1)
52 06-82-0072 M5 x 20mm Pan Hd. Sems T-25 Screw (4) 221 06-75-0031 M6 x 21.5mm Cap Hd. Sems, S5 (4)
53 45-88-0008 Washer (1) 222 28-50-0011 Dust Collection Casting (1)
67 --------------- Spring Pin (1) 223 14-04-0035 Back Bevel Mechanism Assembly (1)
157 45-88-0047 Washer (1) 224 42-92-0024 Back Dust Cover (1)
181 06-82-0103 M3 x 6mm ST Screw (1) 225 06-82-0109 M5 x 13mm Pan Hd. Sems T-25 Screw (1)
191 06-82-0108 M5 x 10mm Pan Hd. T-25 Mach. Screw (15) 226 31-44-0122 Bevel Handle (1)
192 42-92-0021 Cloth Dust Cover-2 (1) 227 45-88-0065 Washer (1)
193 05-89-0012 M6 x 13mm CH Mach. Screw, S5 (1) 228 05-77-0011 M10 x 25mm Hex Machine Screw, M5 (1)
194 06-55-0008 M8 Hex Nut with Nylon (1) 229 44-72-0015 Bevel Indicator (1)
195 43-98-0019 Height Adjustment Knob (1) 230 05-91-0015 External Tooth Spring Washer (1)
196 45-94-0011 Height Adjustment Disk (1) 231 44-66-0068 Dust Cloth Insert Plate (2)
197 06-55-0012 M6 Hex Nut with Nylon (3) 232 42-92-0026 Cloth Dust Cover-1 (1)
198 --------------- Height Adjustment Handle Shaft (1) 233 42-92-0027 Dust Collection Cover (1)
199 34-40-0106 O-Ring (1) 234 05-77-0012 M5 x 16mm Wing Screw (3)
200 34-60-0019 E-Ring (1) 235 06-75-0029 M5 x 18mm Cap Hd. Mach. Screw, S4 (3)
201 45-88-0048 Washer (2) 253 44-66-0069 Dust Cloth Insert Plate-2 (1)
202 45-88-0049 Wave Washer (1) 281 45-08-0013 Height Adjustment Handle Shaft Assy. (1)
GEARCASE and MOTOR ASSEMBLY 111
110
109
95 100 101 102 103 104 105 108
273 106 107 108 109 110 111 107
(2x) 17
145 129
144 274 119 121 122 123 124
125 126 127 128 129 128 103
(2x)
(3x) 101
135
(4x) 124 100
142
(6x) 106
105
130
104
143 127 95
140 126 (3x) 102
141
125 (2x)
115
139 123 (3x) 114
138 122
137 121
(3x) 136
146 147 119
134 118
135 117
(2x) 133 116
137 138 139 127 113
150 276 140 141 (2x) 132 112
148 149 131 (2x)
127 133 134
277 135 136

DO NOT attempt to service or replace the

electronics package #276. Electronics Ser-
vicing can only be performed at this Milwaukee NOTE:
factory Central Repair Center: When servicing gears or gearcase,
MILWAUKEE ELECTRIC TOOL Central Repair 90-95% of old grease must be
1013 Sycamore Avenue l Greenwood, MS removed prior to new grease being
38930-7277 added. Clean gear assemblies
with clean, dry cloth. 5
FIG. PART NO. DESCRIPTION OF PART NO REQ. LUBRICATION:
17 43-97-0010 Riving Knife (1)
= Type ‘Y’ Grease, 49-08-5270
95 06-83-0011 M5 x 8mm Set Screw, S2.5 (3)
100 --------------- M4 x 8mm Pan Hd. T-20 Sems Screw (1) = 277 Red Loctite,® 44-22-0325
101 --------------- Stem (1)
102 --------------- M5 x 16mm Cap Hd. Mach. Screw, S4 (2) 112 Apply a drop of Red Loctite 277 to the threads of screws prior to
103 --------------- M4 x 22.5mm Cap Hd. Mach. Screw, S4 (2) installing on Blade Change Outer Plate.
104 --------------- Bowed Retainer (1)
105 --------------- Riving Knife Attachment Plate (1) 126 Place a liberal amount of grease to the Helical Gear being sure to
106 --------------- Spring Sleeve (1) coat all gear teeth.
107 --------------- M4 Hex Nut with Nylon (2)
131 Place a heavy coat of grease in the gear cavity of Gearcase.
108 --------------- Spring (1)
109 --------------- Anyi-Rotating Washer (1) 136 Apply a liberal amount of grease to the Pinion Gear of the Rotor
110 --------------- Riving Knife Clamp Handle (1) Assembly, being sure to cover all gear teeth.
111 --------------- Handle Shaft (1)
112 06-82-0076 M5 x 13mm Pan Hd. T-25 Mach. Screw (2)
113 44-66-0043 Blade Change Outer Plate (1)
114 44-66-0044 Blade Locking Plate (1)
115 06-82-0078 M5 x 20mm Pan Hd. T-25 Mach. Screw (3)
116 40-50-0146 Spring (1)
117 06-55-0007 5/8-18 UNF RH Hex Nut (1) FIG. PART NO. DESCRIPTION OF PART NO REQ.
118 43-34-0011 Outer Flange Washer (1) 137 --------------- M4.5 x 22mm Pan Hd. T-20 Screw (3)
119 --------------- Blade Shaft (1) 138 --------------- Fan Baffle (1)
121 --------------- Retaining Ring (1) 139 --------------- Stator (1)
122 --------------- Gearcase Bearing Plate (1) 140 --------------- Motor Housing (1)
123 --------------- Sealed Bearing (1) 141 --------------- PCBA (1)
124 --------------- O-Ring (1) 142 06-82-0083 M3.5 x 14mm Pan Hd. ST T-10 Screw (6)
125 --------------- Gearcase Cap (1) 143 31-50-0011 Top Motor Cover (1)
126 --------------- Helical Gear (1) 144 06-82-0087 M4.5 x 14mm Pan Hd. ST T-20 Screw (3)
127 --------------- Retaining Ring (3) 145 42-52-0018 Motor End Cap (1)
128 --------------- Sealed Bearing (1) 146 50-11-0020 Coin Cell Battery (CR-2032N/BN) (1)
129 34-40-0101 O-Ring (1) 147 31-50-0012 Bottom Motor Cover (1)
130 34-40-0103 O-Ring (1) 148 31-21-0011 One-Key Battery Cover (1)
131 28-14-0006 Gearcase (1) 149 06-82-0089 M2.6 x 6mm Pan Hd. ST Phillips Screw (1)
132 34-40-0104 O-Ring (1) 150 42-26-0011 8.25" Blade (1)
133 --------------- Sealed Bearing (1) 273 42-68-0014 Riving Knife Clamp Assembly (1)
134 --------------- Motor Bearing Plate (1) 274 14-30-0031 Blade Shaft with Gearcase Cap Assy. (1)
135 06-82-0081 M5 x 15mm Pan Hd. T-25 Mach. Screw (6) 276 14-20-0067 Electronics Assembly (1)
136 --------------- Rotor (1) 277 16-07-0011 Rotor Assembly (1)
 TABLE SAW ATTACHMENTS / ACCESSORIES 17 18 28 19 20 14 21 22
(2x)
243 242 1 2 3 4 5 8
(2x) (2x) (2x) (2x) 23

24

6 7 25
261 14
24
19 20 21 22 23
25 26 27 28 246
27 246 26

11

1 2 3 4 5 6 7 9 12 13
260 8 9 10 242 243 244 245 (4x) (2x)
95 96 236 247 16
(4x) 14
10 245 244
15

LUBRICATION 181 264 11

15
12 13 14
16 181
= 277 Red Loctite,® 44-22-0325
91 92 93 95
262 96 236 247

263 14
38
29 30 31 32 33 34 35 36 37
39 40 41 42 43 44 45 46 248

92 91 93 37
Apply a drop 36
of Red Loctite ® 277 34 (2x) 42
to threads of screw 33 (2x) 40 (2x)
32
31 (2x)
30 (2x) 14
29 (2x) (2x)
39 43
(2x) (4x)
38
14 6
45
44
265 30
32
31
248 (2x)
41
41 (2x)
35 (4x) 46
(2x)

FIG. PART NO. DESCRIPTION OF PART NO REQ. FIG. PART NO. DESCRIPTION OF PART NO REQ.
1 --------------- M4 x 12mm Pan Hd. ST T-20 Screw (2) 34 40-50-0103 Spring (2)
2 --------------- Flat Washer (2) 35 42-36-0012 Press Spring Bracket (2)
3 --------------- M4 x 12mm Pan Hd. ST T-20 Screw (2) 36 05-81-0018 M4 x 10mm Pan Hd. Tapt. T-25 Screw (2)
4 --------------- Left Blade Guard Wing (1) 37 42-30-0005 Primary Fence Extrusion (1)
5 --------------- Spring Clip (2) 38 40-50-0108 Push Stick Attachment Spring (1)
6 --------------- Blade Guard Base-Right (1) 39 42-36-0013 Push Stick Attachment Bracket (1)
7 --------------- Blade Guard Base-Left (1) 40 42-52-0015 Left Fence Latching Cap (1)
8 --------------- Extended Riving Knife (1) 41 05-81-0019 M5 x 13mm Pan Washer Hd. T-25 Scr. (6)
9 --------------- M4 x 18mm Pan Hd. ST T-20 Screw (4) 42 05-81-0021 M5 x 4mm Pan Hd. T-20 Mach. Screw (2)
10 --------------- Right Blade Guard Wing (1) 43 05-81-0022 M4 x 10mm Pan Hd. Tapt. T-20 Screw (4)
11 --------------- Miter Gauge Knob (1) 44 42-36-0014 Secondary Fence Bracket (2)
12 --------------- Washer (2) 45 42-30-0006 Secondary Fence Extrusion (1)
13 --------------- Miter Gauge (1) 46 43-72-0007 Push Stick (1)
14 06-82-0056 M4 x 8mm Pan Hd. T-20 Mach. Screw (5) 91 42-50-0011 Throat Plate Cam (1)
15 --------------- Miter Gauge Indicator (1) 92 05-89-0010 M4 x 14 Pan Washer Hd. T-20 Screw (1)
16 --------------- Miter Gauge Extrusion (1) 93 40-50-0141 Spring (1)
17 43-97-0010 Riving Knife (1) 95 06-83-0011 M5 x 8mm Set Screw, S2.5 (4)
18 45-96-0020 Wrench (1) 96 43-98-0021 Throat Plate Attachment Knob (1)
19 --------------- E-Ring (1) 181 06-82-0103 M3 x 6mm ST Screw (1)
20 --------------- Retaining Ring (2) 236 44-66-0046 Dado Throat Plate (1)
21 --------------- Anti-Kickback Pawl Bracket-Right Side (1) 242 10-20-9001 Blade Guard Wing Label-Left 1 (1)
22 --------------- Anti-Kickback Pawl Bracket-Left Side (1) 243 10-20-9002 Blade Guard Wing Label-Left 2 (1)
23 --------------- Spring Pin (1) 244 10-20-9008 Blade Guard Wing Label-Right 3 (1)
24 --------------- Spring (1) 245 10-20-9009 Blade Guard Wing Label-Right 4 (1)
25 --------------- Anti-Kickback Pawl Button (1) 246 10-20-9012 Anti Kickback Label (1)
26 --------------- Anti-Kickback Pawl-Left (1) 247 10-20-9011 Dado Throat Plate Label (1)
27 40-50-0081 Spring (1) 248 10-20-9013 Fence Adjustment Label (1)
28 --------------- Anti-Kickback Pawl-Right (1) 260 14-32-0015 Blade Guard Wing Assembly (1)
29 44-60-0087 3 x 35mm Spring Pin (2) 261 14-02-0005 Anti-Kickback Assembly (1)
30 44-60-0088 3 x 24mm Spring Pin (2) 262 14-67-0010 Throat Plate (Dado) Assembly (1)
31 44-20-0013 Fence Latching Handle (2) 263 28-35-0015 Fence Assembly (2)
32 40-50-0098 Fence Latching Spring (2) 264 43-46-0015 Miter Gauge Assembly (1)
33 42-52-0013 Right Fence Latching Cap (1) 265 44-20-0017 Fence Latching Handle and Spring Assy. (2)
 SCREW TORQUE SPECIFICATIONS
SEAT TORQUE
FIG. PART NO. DESCRIPTION OF FASTENER WHERE USED (KG/CM) (IN/LBS)

TABLE TOP and RAIL ASSEMBLIES

47 06-55-0005 M10 Hex Nut with Nylon Fence Pinion Knob 30-35 26-30
52 06-82-0072 M5 x 20mm Pan Hd. Sems T-25 Nylok Screw Fence Pinion Bushing Bracket 32-36 27-31
63 06-82-0074 M5 x 13mm Pan Hd. Sems T-25 Nylok Screw Clamping Plate 32-36 27-31
65 06-55-0011 M6 Hex Nut Latching Adjustment Shaft 80-85 69-73
71 06-55-0006 M5 Hex Nut with Nylon Fence Lock Handle 13-18 11-15
89 06-75-0011 M6 x 8mm Pan Hd. Washer Screw, S4 Fence Length Indicator 10-15 8-13
90 06-75-0022 M6 x 6mm CWH Machine Screw, S4 Sliding Fence Rail 28-32 24-27
92 05-89-0010 M4 x 14mm PWH T-20 Taptite Screw Throat Plate Cam 22-26 19-22

FRAME and PANEL ASSEMBLIES

9 --------------- M4 x 18mm Pan Hd. ST T-20 Screw Battery Housing Mount-Left 10-15 8-13
43 05-81-0022 M4 x 10mm Pan Hd. ST T-20 Screw Battery Plate 12-15 10-13
71 06-55-0006 M5 Hex Nut with Nylon Tool-Less Lever 15-20 13-16
154 --------------- M4 x 13.5mm Pan Hd. ST T-20 Screw Handle Halve B 9-11 7-9
158 05-89-0011 M6 x 11mm Cap Hd. Machine Screw, S5 Frame 55-60 47-52
160 06-82-0093 M5 x 8mm Pan Hd. Taptite T-25 Screw Miter Gage Clip 15-20 13-16
160 06-82-0093 M5 x 8mm Pan Hd. Taptite T-25 Screw Electronic Cover 8-12 7-10
160 06-82-0093 M5 x 8mm Pan Hd. Taptite T-25 Screw Relay Carrier 20-25 16-21
166 --------------- M4 x 6mm Pan Hd. Taptite T-20 Screw Foot Cover 15-20 13-16
170 06-82-0096 M5 x 13mm Pan Hd. T-25 Machine Screw Bevel Plate, Battery Plate 35-40 30-34
170 06-82-0096 M5 x 13mm Pan Hd. T-25 Machine Screw Side Cover Panel 7-9 6-7
171 06-82-0098 M5 x 10mm Pan Hd. ST T-20 Screw Switch Panel, Bevel Adjustment Cam 7-9 6-7
174 06-82-0101 M5 x 8mm Cap Washer Head Screw, S4 Front Cover Panel 80-85 69-73
181 06-82-0103 M3 x 6mm ST Screw Switch Panel 4-5 3-4
189 06-82-0106 M3 x 10mm Pan Hd. ST T-10 Screw Switch Panel 4-5 3-4

DUST COLLECTION ASSEMBLY

52 06-82-0072 M5 x 20mm Pan Hd. Sems T-25 Screw Height Adjustment Shafts 35-40 30-34
181 06-82-0103 M3 x 6mm ST Screw Cloth Dust Cover-2 6-7 5-6
191 06-82-0108 M5 x 10mm Pan Hd. T-25 Machine Screw Cloth Dust Cover-2 14-17 12-14
191 06-82-0108 M5 x 10mm Pan Hd. T-25 Machine Screw Front Dust Cover 8-10 7-8
191 06-82-0108 M5 x 10mm Pan Hd. T-25 Machine Screw Bevel Indicator 20-25 16-21
191 06-82-0108 M5 x 10mm Pan Hd. T-25 Machine Screw Cloth Dust Cover-1 20-25 16-21
191 06-82-0108 M5 x 10mm Pan Hd. T-25 Machine Screw Back Dust Cover 30-34 26-29
193 05-89-0012 M6 x 13mmCH Machine Screw, S5 Height Adjustment Knob 20-25 16-21
194 06-55-0008 M8 Hex Nut with Nylon Height Adjustment Disk 20-25 16-21 7
197 06-55-0012 M6 Hex Nut with Nylon Height Adjustment Bevel Gears 1 & 2 20-26 16-22
207 06-75-0027 M5 x 24mm Cap Hd. Sems Screw, S4 Height Adjustment Block 35-40 30-34
211 06-82-0111 M5 x 10mm Pan Hd. T-25 Sems Screw Cloth Dust Cover-2 14-17 12-14
211 06-82-0111 M5 x 10mm Pan Hd. T-25 Sems Screw Height Adjustment Screw 20-26 16-22
214 06-82-0113 M4 x 12mm Pan Hd. T-20 Machine Screw Riving Knive Dust Cover 6-7 5-6
217 06-82-0107 M6 x 14mm Pan Hd. T-25 Machine Screw Front & Back Bevel Mechanism Assemblies 65-70 56-60
221 06-75-0031 M6 x 21.5mm Cap Hd. Sems, S5 Front & Back Bevel Mechanism Assemblies 90-100 78-86
225 06-82-0109 M5 x 13mm Pan Hd. Sems T-25 Screw Bevel Handle 20-25 16-21
228 05-77-0011 M10 x 25mm Hex Machine Screw, M5 Dust Collection Casting 40-43 34-37
234 05-77-0012 M5 x 16mm Wing Screw Dust Collection Cover 8-10 7-8
235 06-75-0029 M5 x 18mm Cap hd. Machine Screw, S4 Dust Collection Casting 8-10 7-8

GEARCASE and MOTOR ASSEMBLIES

100 --------------- M4 x 8mm Pan Hd. T-20 Sems Screw Bowed Retainer 25-33 21-28
101 --------------- Stem Bowed Retainer 28-32 24-27
102 --------------- M5 x 16mm Cap Hd. Machine Screw, S4 Bowed Retainer 30-36 26-31
103 --------------- M4 x 22.5mm Cap Hd. Machine Screw, S4 Bowed Retainer 20-25 16-21
112 06-82-0076 M5 x 13mm Pan Hd. T-25 Machine Screw Blade Change Outer Plate 40-45 34-39
115 06-82-0078 M5 x 20mm Pan Hd. T-25 Machine Screw Gearcase Bearing Plate 35-40 30-34
117 06-55-0007 5/8-18 UNF RH Hex Nut Blade Shaft 100-110 86-95
135 06-82-0081 M5 x 15mm Pan Hd. T-25 Machine Screw Motor Bearing Plate 35-40 30-34
135 06-82-0081 M5 x 15mm Pan Hd. T-25 Machine Screw PCBA 15-18 13-15
137 --------------- M4.5 x 22mm Pan Hd. T-20 Screw Fan Baffle, Stator 22-28 19-24
142 06-82-0083 M3.5 x 14mm Pan Hd. ST T-10 Screw Top Motor Cover 8-10 7-8
144 06-82-0087 M4.5 x 14mm Pan Hd. ST T-20 Screw Motor Housing 8-12 7-10
149 06-82-0089 M2.6 x 6mm Pan Hd. ST Phillips Screw One-Key Battery Cover 2.5-3.5 2-3

TABLE SAW ATTACHMENTS and ACCESSORIES

1 --------------- M4 x 12mm Pan Hd. ST T-20 Screw Left Blade Guard Wing 10-11 8-9
3 --------------- M4 x 12mm Pan Hd. ST T-20 Screw Left Blade Guard Wing 10-11 8-9
9 --------------- M4 x 18mm Pan Hd. ST T-20 Screw Blade Guard Base-Left 10-15 8-13
14 06-82-0056 M4 x 8mm Pan Hd. T-20 Machine Screw Miter Gauge Indicator 15-18 13-15
14 06-82-0056 M4 x 8mm Pan Hd. T-20 Machine Screw Anti-Kickback Pawl Bracket-Right Side 15-18 13-15
14 06-82-0056 M4 x 8mm Pan Hd. T-20 Machine Screw Push Stick Attachment Spring & Bracket 10-14 8-12
36 05-81-0018 M4 x 10mm Pan Hd. Taptite T-25 Screw Press Spring Bracket, Fence Latching Caps 14-18 12-15
41 05-81-0019 M5 x 13mm Pan Washer Hd. T-25 Screw Primary Fence Extrusion, Fence Bracket 36-40 31-34
42 05-81-0021 M5 x 4mm Pan Hd. T-20 Machine Screw Secondary Fence Bracket 18-23 15-19
43 05-81-0022 M4 x 10mm Pan Hd. Taptite T-20 Screw Secondary Fence Bracket & Extrusion 18-23 15-19
92 05-89-0010 M4 x 14mm Pan Washer Hd. T-20 Screw Throat Plate Cam 22-26 19-22
181 06-82-0103 M3 x 6mm ST Screw Miter Gauge Extrusion 4-6 3-5