THE MAHARAJA SAYAJIRAO UNIVERSITY OF BARODA

CONSTRUCTION DIVISION

ESTD.
1949

Percentage Unit RateTender for the work :- Supply, Installation, Testing and Commissioning of Fire Fighting System including Fire
Hydrant Network , Fire Alarm and Sprinkler System , Allied accessories etc. in different Buildings of University Campus

ITEM
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
NO
Supplying, Installation, Testing and commissioning of G.I. "B" Class
Heavy duty pipes as per IS: 1239/ IS: 3589 including cutting, screwing,
1 welding etc. and providing all fittings like flanges, bends, tees, elbows, 1 RMT 2000.00 2000.00
reducers, clamps etc. (A) 200mm (Rates are including for job work of
making connection to exsiting water tank)
2 Do…do….(B) 150mm 1 RMT 1519.00 1519.00
3 Do….do….(C) 100mm 1 RMT 1007.14 1007.14
4 Do…..do…..(D) 80mm 1 RMT 953.51 953.51
5 Do……do….(E) 50mm 1 RMT 725.00 725.00
6 Do…. do….. .(F) 40mm 1 RMT 556.78 556.78
7 Do…..do…... (G) 32mm 1 RMT 455.55 455.55
8 Do…….do…...(H) 25mm 1 RMT 362.00 362.00
9 Do…….do…...(I) 20mm 1 RMT 264.00 264.00
10 Do…….do…...(J) 15mm 1 RMT 210.00 210.00
Supplying, Installation, Testing and commissioning of G.I. "C" Class
Heavy duty pipes as per IS: 1239/ IS: 3589 including cutting, screwing,
11 welding etc. and providing all fittings like flanges, bends, tees, elbows, 1 RMT 3350.00 3350.00
reducers, clamps etc. (A) 200mm (Rates are including for job work of
making connection to exsiting water tank)
12 Do…do….(B) 150mm 1 RMT 2450.00 2450.00
13 Do….do….(C) 100mm 1 RMT 1590.00 1590.00
14 Do…..do…..(D) 80mm 1 RMT 1250.00 1250.00
15 Do……do….(E) 50mm 1 RMT 750.00 750.00
16 Do…. do….. .(F) 40mm 1 RMT 690.00 690.00
17 Do…..do…... (G) 32mm 1 RMT 550.00 550.00
18 Do…….do…...(H) 25mm 1 RMT 490.00 490.00
Applying priming coat over steel and other metel surface after and
including preparing the surface by throughly cleaning, oil,grease, dirt and
other foreign matter and scoured with brushes fine steel wood, scrapers
19 and sand paper with ready mixed priming paint brushing red lead 1 SQM 41.06 41.06
complete for all heights with necessary scaffolding as per the instruction.

Painting two coats (excluding priming coat) on steel and other metal
surface with premium enamel paint, brushing, interior to give an even
shade including cleaning the surface an even shade including cleanicn the
20 1 SQM 103.46 103.46
surface of all dirt, dust and other foreign matter complete for all heights
with necessary scaffolding as per the instructions.

Supplying, Installation, Testing and commissioning of brass quartzoid

sprinklers (UL listed) of 15 mm dia size, suitable for sustaining the
pressure on the seat & water hammer effect. The type & temperature
21 1 Nos. 350.00 350.00
rating shall be as follows :rating of 57 deg.C. with required accessories ,
tools & tackeles to complete the job at satisfactory level of Client PM's.b)
ITEM
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
NO
Hydrant valves (also called Landing valves) provide the means to draw
water for firefighting from the Fire water piping network.They are
normally mounted onto stand posts , fitted on the fire water network.Brief
Description :Hydrant Valve –Type A, ISI marked (IS:5290), made of
Stainless Steel (SS304),having 75mm flanged inlet, and 63 mm Female
22 1 Nos. 5100.00 5100.00
Instantaneous outlet, provided with C.I. handwheel for operation, and PVC
blank cap with chain. Body duly painted with 2 coats of superior quality
paint. H.P. tested to 21 kgf/cm2 (body) and 14 kgf/cm2 (seat). Flow 900
lpm (min) at 7kgf/cm2

Hydrant valves (also called Landing valves) provide the means to draw
water for firefighting from the Fire water piping network.They are
normally mounted onto stand posts , fitted on the fire water network. Brief
Description :Hydrant Valve (Double headed), as per IS: 5290, made of
23 Stainless Steel (SS304), having 100 mm flanged inlet, and 2 Nos. 63 mm 1 Nos. 11200.00 11200.00
Female Instantenous outlets, C.I. handwheels for hydrant operation,and
PVC blank caps with chain. Body duly painted with 2 coats of superior
quality paint. H.P. tested to 21kgf/cm2 (body) and 14 kgf/cm2 (seat). Flow
1800 lpm (min) at 7 kgf/cm2.
Short Branch Pipe with Nozzle is the most common fire fighting nozzle
in use in the country. The nozzle gives a solid jet and different sizes (bore)
of nozzles can be fitted to the branch body depending upon operational
requirement. Brief Description Short Branch Pipe with Nozzle,
24 conforming to IS: 903,madeof Stainless Steel (SS304) fitted with 15/ 20 1 Nos. 1780.00 1780.00
mm bore nozzle, for projecting for projecting water in form of solid jet.
The Branch shall have 63mm MaleInstantaneous Inlet, suitable for use
with 63 mm size Fire fighting hoses. H.P. tested to 21 kgf/cm2 for 2.5
minutes.
Hose Reels Drum are first aid firefighting equipment, meant for use by
untrained/semi-trained personnel at the incipient stages of the fire. Hose
Reels are strategically located at various locations, and fed by pressurized
supply of water. A rubber/ PVC hose of 1”dia. (of 30/ 36 mtrs length) is
wound on the revolving drum, and connected to a discharge nozzle.Brief
25 Description Hose Reel (Swing type), As per IS:884, made of M.S. 1 Nos. 7800.00 7800.00
construction, having Rubber/PVC hose of 1”/ 3Ú4“ dia. of 30/36 mtrs.
length, and fitted with Gunmetal/Stainless Steel Shut off nozzle. The Hose
Reel shall provide a good range jet at the specified pressure for effective
firefighting.

Hose boxes Double Door provide the means to store Delivery Hoses and
branches in indoor and outdoor locations. They protect the
Hoses/Branches from the effects of weather, dust, etc, and allow quick
deployment of the same in the event of emergency. Hose Boxes can be
mounted on the wall, or if outdoors, on specially fabricated stands. Brief
26 Description Box, made of Carbon (Mild) Steel sheet, 18 gauge thickness, 1 Nos. 3850.00 3850.00
approx. dimensions 750 x 600 x 250, suitable for storage of 2 No. 15 Mtrs.
63 mm Delivery hose, and short branch. Box shall have glass front, and
locking arrangement (& small glass window for storing key opener) as per
IS : 636 .
ITEM
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
NO
Hose boxes Single door provide the means to store Delivery Hoses and
branches in indoor and outdoor locations. They protect the
Hoses/Branches from the effects of weather, dust, etc, and allow quick
deployment of the same in the event of emergency. Hose Boxes can be
mounted on the wall, or if outdoors, on specially fabricated stands. Brief
27 1 Nos. 2100.00 2100.00
Description Hose Box, made of Carbon (Mild) Steel sheet, 18 gauge
thickness, approx. dimensions 450 x 600 x 250, suitable for storage of 1
No. 15 Mtrs. 63 mm Delivery hose, and short branch. Box shall have glass
front, and locking arrangement (& small glass window for storing key
opener) as per IS : 636 .
RRL Hose Pipe With SS 304 Coupling Delivery Hose Couplings provide
the means to connect Fire Hoses to one another and to hydrant valves,
branches, fittings and adaptors. Instantaneous couplings consist of Male
and Female parts, and have a serrated tail portion, on which the hose is
28 1 Nos. 4255.00 4255.00
mounted and bound with Copper/ G.I. wire. Brief Description type
Male/Female Hose couplings, 63mm size, Conventional design, made of
Gunmetal, suitable for use with 63 mm Fire fighting delivery Hose.

Fire Brigade Inlet (also called Pumping In Breech) allows Fire Tenders
(Pumpers) to pump in water into the DryRiser/ Wet Riser/ Sprinkler
system piping using external water sources such as hydrants. Fire Brigade
Inlet isfitted with required number of standard Male Instantenous inlets to
feed the Riser pipe depending upon size.Brief Description (Pumping in
29 Breech), having Cast Iron body with 4 Nos. 63 mmsize SS Male 1 Nos. 9800.00 9800.00
Instantaneous inlets (with NRV), and 80 mm size flanged outlet, suitable
for connection to DryRiser piping. Fire Brigade inlet body shall be
provided with drain valve for draining water after operation.

Fire Brigade Inlet (also called Pumping In Breech) allows Fire Tenders
(Pumpers) to pump in water into the Dry Riser/ Wet Riser/ Sprinkler
system piping using external water sources such as hydrants. Fire Brigade
Inlet is fitted with required number of standard Male Instantenous inlets to
feed the Riser pipe depending upon size.Brief Description (Pumping in
30 Breech), having Cast Iron body with 2 Nos. 63 mm size SS Male 1 Nos. 7255.00 7255.00
Instantaneous inlets (with NRV), and 80 mm size flanged outlet, suitable
for connection to Dry Riser piping. Fire Brigade inlet body shall be
provided with drain valve for draining water after operation.

Supplying, Installation, Testing and commissioning MS Supporting

31 material For Pipe line 1 KG 122.00 122.00

Supplying, Installation, Testing and commissioning of Butterfly Valve CI

32 Body SS Plated butterfly valve with all Accessories, flanges, gasket, 1 Nos. 12415.00 12415.00
nutbolt with fiting) (A) 200mm DIA
33 Do…..do……..(B) 150mm DIA 1 Nos. 5230.00 5230.00
34 Do…..do…… ( C) 100mm DIA 1 Nos. 3327.00 3327.00
35 Do……do……..(D) 80mm DIA 1 Nos. 2563.00 2563.00
36 Do……do…….. (E) 50mm DIA 1 Nos. 2226.00 2226.00
Supplying, Installation, Testing and commissioning of SLUICE VALVE
37 CI Body/SS between flanges with all Accessories, flanges, gasket, nutbolt 1 Nos. 29480.00 29480.00
with fiting (A) 200mm DIA
ITEM
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
NO
Do…..do……..(B) 150mm DIA
38 1 Nos. 16377.00 16377.00

39 Do…..do……..(C) 100mm DIA 1 Nos. 11865.00 11865.00

Supplying, Installation, Testing and commissioning of Y-TYPE STAINER
40 / FOOT VALVE CI Body/SS between flanges with all Accessories, 1 Nos. 26226.00 26226.00
flanges, gasket, nutbolt with fiting (A) 200mm DIA
41 Do…..do……..(B) 150mm DIA 1 Nos. 13106.00 13106.00
42 Do…..do……..(C) 100mm DIA 1 Nos. 6545.00 6545.00
43 Do…..do……..(D) 80mm DIA 1 Nos. 4883.00 4883.00
Supply, Installation, Testing and Commissioning of S.S. Ball Valves (PN
44 16) with all fittings required. (A) 25MM DIA 1 Nos. 1213.00 1213.00

Do….do…….. (B) 20MM DIA

45 1 Nos. 2150.00 2150.00

NRV(NON RETURN VALVE) CI Body/SS dual plate non return valve

46 between flanges with all Accessories, flanges, gasket, nutbolt with fiting 1 Nos. 25221.00 25221.00
(A) 200mm DIA
47 Do…..do…….. (B) 150mm DIA 1 Nos. 14853.00 14853.00
48 Do…..do…….. ( C) 100mm DIA 1 Nos. 8520.00 8520.00
49 Do…..do…….. (D) 80mm DIA 1 Nos. 6101.00 6101.00
50 Do…..do…….. (E ) 50mm DIA 1 Nos. 3231.00 3231.00
Providing, fixing , testing and commisioning of gun metal air release valve
51 1 Nos. 2150.00 2150.00
with connection in the riser & control valve
CABLE END TERMINATION AND CONNECTION : Supplying and
erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI
marked copper wires of following size to be erected as directed. The job
also includes, if necessary, supply and fixing of extension busbar of same
material on circuit breaker or panel board terminal / connector to connect
52 1 RMT 250.00 250.00
more than one no. of parallel cables or to connect higher size cable to
lower size unit. The job also includes earthing the glands and armour of
the cable with common earth bar or flexible copper mesh (A) 2.5 SQMM
X 3 CORE ARMOURED FRLS CABLE

Do…..do….. (B) 4 SQMM X 4 CORE ARMOURED FRLS CABLE

53 1 RMT 426.00 426.00
Do…..do…….. (C) 6 SQMM X 4 CORE ARMOURED FRLS CABLE
54 1 RMT 598.00 598.00
Do…..do…….. (D) 10 SQMM X 4 CORE ARMOURED FRLS CABLE
55 1 RMT 794.00 794.00
Do…..do…….. (E) 16 SQMM X 4 CORE ARMOURED FRLS CABLE
56 1 RMT 1160.00 1160.00
Do…..do…….. (F) 35 SQMM X 4 CORE ARMOURED FRLS CABLE
57 1 RMT 2666.00 2666.00
Providing and fixing heavy duty flange type brass cable gland with rubber
ring for PVC insulated armoured cable complete with outgoing tails
58 1 EACH 37.00 37.00
insilating tape etc. following size of cables. (A) 2 to 4core 2.5/4sq.mm.

59 Do……do…...(B) 2 to 4core 6/10sq.mm. 1 EACH 43.00 43.00

60 Do…….do…...(C) 2 to 4core 16/25sq.mm. 1 EACH 56.00 56.00
Solder less crimping type Copper lugs confirming to IS suitable for cable
of following size evenly crimped with high pressure tools an connected to
61 1 EACH 9.00 9.00
switchgear terminal with brass/ cadmium plated nut-bolts in approved
manner. (A) 1.5/2.5 to 6 sq.mm.
ITEM
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
NO
62 Do…. do….(B) 10 sq .mm 1 EACH 11.00 11.00
63 Do…..do….(C)16 sq. mm 1 EACH 13.00 13.00
64 Do…..do…(D) 35/50 sq. mm 1 EACH 24.00 24.00
Supply, Installation, Testing and Commissioning of ELECTRIC DRIVEN
MAIN FIRE PUMP (Hydrant & Sprinkler Pump) suitable for automatic
operation and consisting of following: complete in all respect as
required.a) Horizontal, centrifugal, end suction pump to ensure a
minimum pressure of 3.5 kg / sq.cm. at highest and farthest outlet at
specified flow And Head mtr. head conforming to IS standards. The
installation shall be complete with flexible coupling and coupling guard as
required.b) Squirrel cage induction motor with suitable HP with
synchronous speed RPM, Suitable for operation on 415 volts, 3 phase 50
Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type
with Class-F insulation, Conforming to IS standards. c) Common Base
plate for Pump and motor and coupling, coupling guard and other
65 accessories as required for complete Installation of pump set. Suitable 1 Nos. 41630.00 41630.00
cement concrete foundation with cement concrete plaster complete with
anti-vibration arrangement of cushy foot mountings shall be done
contractor. The supply & Installation of J-Type bolt for Pump fixing in
vendor scope. Pump shall be capable of furnishing not less than 150% of
rated capacity at a head of not less than 65% of the rated head. The shut
off head shall not exceed 120% of rated head.d) The pump should be
tested for bench mark at factory & Test certifcate submit to client . The all
require Technical specification & Test certificate shall be submit for Local
fire Authority approval.). Casing - Cast Iron to IS:210. Impeller - Bronze
IS:318 (A) 7.5 HP (SUITABLE HEAD AND LPM)

66 Do.. do…..(B) 10 HP (SUITABLE HEAD AND LPM) 1 Nos. 47670.00 47670.00

67 Do.. do…..(C) 12.5 HP (SUITABLE HEAD AND LPM) 1 Nos. 50255.00 50255.00
68 Do.. do…..(D) 15 HP (SUITABLE HEAD AND LPM) 1 Nos. 73950.00 73950.00
69 Do.. do…..(E) 20 HP (SUITABLE HEAD AND LPM) 1 Nos. 81270.00 81270.00
70 Do.. do…..(F) 25 HP (SUITABLE HEAD AND LPM) 1 Nos. 87975.00 87975.00
71 Do.. do…..(G) 30 HP (SUITABLE HEAD AND LPM) 1 Nos. 112470.00 112470.00
72 Do.. do…..(H) 40 HP (SUITABLE HEAD AND LPM) 1 Nos. 164450.00 164450.00
73 Do.. do…..(I) 50 HP (SUITABLE HEAD AND LPM) 1 Nos. 185040.00 185040.00
74 Do.. do…..(J) 60 HP (SUITABLE HEAD AND LPM) 1 Nos. 259040.00 259040.00
75 Do.. do…..(K) 75 HP (SUITABLE HEAD AND LPM) 1 Nos. 365000.00 365000.00
Electrical Motor Driven Booster Pump for Hydrant System : Horizontal
mounted multistage booster pump having cast iron body, S.S. impeller ,
stainless shaft with mechanical seal capable of delivering 7.5 HP against
total head of 60 MTR while running at 2900 RPM complete. The System
shall be complete with necessary pressure gauge with gun metal shut off
76 1 Nos. 62500.00 62500.00
clock on delivery side including by pass arrangement for testing of
working of the pumping set as required . (A) 7.5 HP (Suitable Head and
LPM) (Rates are including for job work of making connection to exsiting
water tank)

Fire pump panel for Booster Pump - Starter panel with star delta or as per
77 CFO approved starters rated sto suit pump HP with necessary protection 1 Nos. 34500.00 34500.00
features.
ITEM
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
NO
Supplying, installation, testing & commissioning of electric driven
pressurisation JOCKEY ELECTRIC PUMP (fire hydrant & sprinkler
system) suitable for automatic operation & consisting of following etc.
complete in all respect as required. Vertical Inline type, multistage,
centrifugal pump of cast iron body and bronze impeller with stainless steel
shaft, mechanical seal conforming to IS: 1520. Suitable HP, SQ cage
induction motor TEFC type synchronous speed 2900RPM suitable for
78 operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for 1 Nos. 40890.00 40890.00
enclosure, vertical mounted type with class 'F' insulation, conforming to
IS: 325. M.S.fabricated common base plate, coupling, coupling guard,
foundation bolts etc. as required.suitable cement concrete foundation duly
plastered with anti vibration pads as required (A) 7.5 HP (SUITABLE
HEAD AND LPM)

79 Do… do… (B) 10 HP (SUITABLE HEAD AND LPM) 1 Nos. 54340.00 54340.00
80 Do… do… (C) 12.5 HP (SUITABLE HEAD AND LPM) 1 Nos. 62050.00 62050.00
81 Do… do… (D) 15 HP (SUITABLE HEAD AND LPM) 1 Nos. 17165.00 17165.00
82 Do… do… (E) 20 HP (SUITABLE HEAD AND LPM) 1 Nos. 81270.00 81270.00
Supply, Installation, Testing and Commissioning of DIESEL DRIVEN
PUMP(Stand By) fire pump suitable for automatic operation and
consisting of following: complete in all respect as required. a) Horizontal,
centrifugal, end suction pump to ensure a minimum pressure of 3.5 kg /
cm². at highest and farthest outlet at specified flow AND lpm at mtr. head
conforming to IS standards. The installation shall be complete with
flexible coupling and coupling guard as required.b) Diesel engine of 2000
RPM water cooled type with radiator conforming to relevant BS & IS
standard complete with auto starting mechanism, 12 volts/24 volts electric
starting equipment, Diesel tank, exhaust pipe extended up to 1 mtr outside
pump house duly insulated with 50 mm. thick glass wool with 1.0 mm.
thick aluminium sheet cladding, residential silencer, instruments and
protection as per specification, stop solenoid for auto stop in the event of
1 Nos. 334650.00 334650.00
fault with audio indications, painted with post office red colour etc. as
required.c) 1 no. 8 hours capacity day diesel storage tank fabricated from
3 mm thick M.s plates. Tank shall be provided with inlet, outlet, overflow,
air vent, drain connections, filling connection and magnetic level
indicator. Tank shall be mounted on a suitable steel structure (painted with
2 coats of red oxide paint). tank shall be provided with epoxy coat from
83 inside & two or more coats of synthetic enamel paint outside over two
coats of red oxide primer. d) 24 volts 180 AH lead acid battery (24 volts- 2
Nos) with boost/trickle charger for starting the engine automatically
complete as required.
ITEM
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
NO
e) Suitable cement concrete foundation with cement concrete plaster
complete with anti-vibration arrangement of cushy foot mountings shall be
in scope of contractor. Common Base plat for Pump and Engine and
coupling, coupling guard and other accessories as required for complete
installation of pump set.The supply & Installation of J-Type bolt for Pump
fixing in vendor scope. The pump should be tested for bench mark at
factory & Test certifcate submit to client . & The all requrie Technical
specification & Test certificate shall be submit for Local fire Authority
approval.).Casing - Cast Iron to IS:210, Gr. FG260. Impeller - Bronze
IS:318 Br. LTB 2. (BS 1400 GR. LG2) Shaft & Sleeve - ASTM A276
Gr. 410 (A) 39 BHP (SUITABLE HEAD AND LPM)

84 Do…do…. (B) 56 BHP (SUITABLE HEAD AND LPM) 1 Nos. 460000.00 460000.00
85 Do…do…. (C) 76 BHP (SUITABLE HEAD AND LPM) 1 Nos. 611800.00 611800.00
86 Do…do…. (D) 102 BHP (SUITABLE HEAD AND LPM) 1 Nos. 692300.00 692300.00
Supply Installation, assembly, connection, testing and commissioning of FIRE
PUMP CONTROL PANEL as per Drawing, Specification, Technical Data
sheet & IS.Panel shall be manufactured CPRI approved panel manufacturer
with inhouse 7 tank process and painting facility.The unit rate for each item
shall include Testing of panels as per specifications at manufacturer's works in
presence of clients representative and/or consultant.Supply & delivery of the
panels at the site.Assembly and wiring of component supplied
separately.Installation of panels as per lcoation arranged by site engineer in
charge including removing packing.'Shifting of panels from site store to the
suitable location.(If applicable).Installation of panels as per lcoation arranged
by site engineer in charge including removing packing.Earthing all
components, frame etc. to a common internal earth bar.Supply & fixing all
accessories and supporting structure.'Toching of body with poweder coating for
demaged parts. All the nuts bolts & joints exposed to the air shall be covered
87 1 Nos. 12650.00 12650.00
with suitable anti-oxidant material or as directed by the Engineer incharge.To
carry out the insulation test at site and all the readings shall be submitted in
duplicate to the consultant or engineer-in-charge.To prepare submission
drawing and to take approval of consultant at each stage.For panel MS angle
stand required. ( Size MS angle & height of stand as per Panel Weight & size
of cable termination requirement to be calculate by panel vendor, need to
confirm with desing Consultant). Checking of Internal connection and wiring,
operation of switches, starter, MCCB, MCB, relays, contactors etc.Supply of
necessary tools, hardware, testing hardware, testing equipment etc.To prepare
& submit as-built drawing and handing over document to end user. Approval
from consultant required before fabrication of panel. (A) 7.5 HP

88 Do……do…… (B) 10 HP 1 Nos. 13000.00 13000.00

89 Do……do…… (C) 12.5 HP 1 Nos. 21275.00 21275.00
90 Do……do…… (D) 15 HP 1 Nos. 22285.00 22285.00
91 Do……do…… (E) 20 HP 1 Nos. 23575.00 23575.00
92 Do……do…… (F) 25 HP 1 Nos. 24100.00 24100.00
93 Do……do…… (G) 30 HP 1 Nos. 29900.00 29900.00
94 Do……do…… (H) 40 HP 1 Nos. 36800.00 36800.00
95 Do……do…… (I) 50 HP 1 Nos. 61525.00 61525.00
96 Do……do…… (J) 60 HP 1 Nos. 62500.00 62500.00
97 Do……do…… (K) 75 HP 1 Nos. 70725.00 70725.00
ITEM
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
NO
Supply, Installation, Testing and Commissioning of 150 mm dia Glycerine
filled Pressure Gauge of range 0 - 15 Kg / cm² conforming to IS - 3624
having bourdon tube of stainless steel 310 in cast aluminium, stove
enameled, black, weather proof case with outer, screwed aluminium bezel
98 and complete with necessary U-type stainless steel siphon tube and cock 1 Nos. 2025.00 2025.00
including providing suitably painted angle iron support to the tube etc.as
per specification complete as required. Cost shall be inclusive of providing
any short pieces, nipples, elbows etc as required.

Supply, Installation, Testing and Commissioning of Pressure Switches for

automation of fire pumps with requrie all aceessories & Tool-tackles to
complete job at satisafaion level of Client PM. Pressure switches shall be
99 double pole single throw type suitable for 1 phase supply with diaphragm. 1 Nos. 2035.00 2035.00
Aluminum Enclosure with IP 66 protection as required.

Supply, Installation,testing & Commissing of Intiligient Addressable 1

loop Main panel Expandable up to 2 loop with 144 character capacity
LCD disply 15 LEDs in displying imotant information, Maximun capacity
of panel 477 intelligent devices, 32 logical configurable zones with each
zone owen alarm & fault/disable LEDs and a label, Integrated Wide range
PSU (100-240V) with Battery Charger, Excluding Batteries, Multiple
language options, PAS and Acknowledge Function, Dirty Detector
Reporting, Wide range power supply, RS-485 throught Net-workable, RS-
100 232 throught Programmable from PC, Built-in RS485 Passive repeater 1 Nos. 45000.00 45000.00
output, Advanced user friendly programming software including ‘Fuzzy
Logic’, Panel shall have compatibility of BMS and third party intigration
avaialbiltiy, Panel shall have metal body with all fire norms compatibility
across, All loops having Min. leanth of 1200 Mtr as per norms if required
loop expander shoud have compitable with main FAS panel. (Aprroved by
LPCB & EN54)

Supply, Installation,testing & Commissing of Intiligient Addressable 2

loop Main panel with 144 character capacity LCD disply 15 LEDs in
displying imotant information, Maximun capacity of panel 477 intelligent
devices, 32 logical configurable zones with each zone owen alarm &
fault/disable LEDs and a label, Integrated Wide range PSU (100-240V)
with Battery Charger, Excluding Batteries, Multiple language options,
PAS and Acknowledge Function, Dirty Detector Reporting, Wide range
power supply, RS-485 throught Net-workable, RS-232 throught
101 Programmable from PC, Built-in RS485 Passive repeater output, 1 Nos. 55000.00 55000.00
Advanced user friendly programming software including ‘Fuzzy Logic’,
Panel shall have compatibility of BMS and third party intigration
avaialbiltiy, Panel shall have metal body with all fire norms compatibility
across, All loops having Min. leanth of 1200 Mtr as per norms if required
loop expander shoud have compitable with main FAS panel. (Aprroved by
LPCB & EN54)
ITEM
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
NO
Microprocessor based Fire Alarm Control Panel, 2 loop expandable up to
8 loop with optional loop card, each loop capable of taking max.242
Devices in any combination in each loop, Modular constructed for future
expansion, 40 x15 lines LCD Display, Up to 999 programmable zones and
140 zones indication with each zone owen alarm & fault/disable LEDs and
a label , 2 Bell Circuit, Day and Night Mode, Enable and Disable
function, PAS and Acknowledge Function, Dirty Detector Reporting, ,
Duplicate Address Checking, Walk Test Function with optional silent
102 mode, Programmable from PC or Panel, History record - 999 fire incident 1 Nos. 150000.00 150000.00
and 999 general events capacity in non-volatile memory, Networkable
with GST Intelligent Fire panels up to 240 nodes ( CAN Class B
connection ), Optional GST-GMC graphic station, Optional RS 485 mimic
and repeater up to 64, Built in Fire Alarm, FPE, Fault and Alarm Router
output, Panel Printer included, Built in Battery Charger, Optional
protection of re-programming, (Approved by LPCB & EN54.)

103 Single Loop Card for series, capacity of 242 devices 1 Nos. 25000.00 25000.00
104 Dual Loop Card, capacity of 484 devices 1 Nos. 35000.00 35000.00
RS485 Network Card for GST200 series panel and GST-NRP00,
105 1 Nos. 10000.00 10000.00
Maximum 1200 meters, Class A Connection
RS485 Network Card for series panel, Maximum 1200 meters, Class A
106 1 Nos. 10000.00 10000.00
Connection
Supply, Installation,testing & Commissing of Active Repeater with Full
Function Control, 144 character capacity LCD disply 15 LEDs in
107 displying imotant information, repeater panel networking via RS-485, 1 Nos. 30000.00 30000.00
Password protect access levels, Flush-mount or Surface-mount structure.
(Aprroved by LPCB & EN54)
Supply, Installation,testing & Commissing Intelligent Photoelectric Smoke
+ Heat Multi Detector, With Remote Indicator Output, Magnetic Test
108 Function, Built-in microprocessor stores 14 history data, 2-level 1 Nos. 1800.00 1800.00
sensitivities, LED for 360° vision and Removable innovative sensing
chamber. (Aprroved by LPCB & EN54)

Supply, Installation,testing & Commissing Intelligent Photoelectric Smoke

Detector, With Remote Indicator Output, Magnetic Test Function, Built-in
109 microprocessor stores 14 history data, 2-level sensitivities, LED for 360° 1 Nos. 1800.00 1800.00
vision and Removable innovative sensing chamber.(Aprroved by LPCB &
EN54)
Supply and Installation of Intelligent Photoelectric Heat Detector, With
Remote Indicator Output, Rate of Rise and Fixed Temperature, Magnetic
110 Test Function, Built-in microprocessor stores 14 history data, 3 classes 1 Nos. 1800.00 1800.00
programmable, LED for 360° vision . (Aprroved by LPCB & EN54)

Supply, Installation,testing & Commissing of Flush mount Resettable

Manual Call point (Non-Breaking Glass), Supplied with surface mount
111 back box and Special Reset Key, Optional Accossories:4556356, 1 Nos. 3000.00 3000.00
4556520 (Aprroved by LPCB & EN54)
Supply of Addressable Sounder with Visible Indicator, 16 tones, high/low
112 consumption modes, can be loop powered or 24VDC powered, 83-89dB 1 Nos. 3500.00 3500.00
(Aprroved by LPCB/EN54)
ITEM
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
NO
Supply of Single Input Module, provides dry contact (Loop powered) or
113 active output (24VDC required, cable monitored) (Aprroved by LPCB & 1 Nos. 2500.00 2500.00
EN54)
Supply of Single Output Module, provides dry contact (Loop powered) or
114 active output (24VDC required, cable monitored) (Aprroved by LPCB & 1 Nos. 2500.00 2500.00
EN54)
Input Module for Fault and Alarm Monitoring, Capable connect
115 conventional detectors into GST addressable system. 24VDC required 1 Nos. 2800.00 2800.00
(Certified by LPCB)
Computer Based Software, Enabling Complete Colour graphic Control
and Display system, Providing a Window on to the Fire Alarm System,
116 1 Nos. 75000.00 75000.00
Compatible with GST-IFP8 and GST200 series panel, Computer not
Included
8 Zone, 3 Programmable Sounder Circuit, 1 Fire Alarm Output, 1 Fault
Output, 1 Disalbe/Supervisory Output,1 AUX power output, Repeater
117 1 Nos. 21000.00 21000.00
Output against per zone,Built-in Battery Charger, Excluding Batteries
(Certified by LPCB)
4 Zone, 3 Programmable Sounder Circuit, 1 Fire Alarm Output, 1 Fault
Output, 1 Disalbe/Supervisory Output,1 AUX power output, Repeater
118 1 Nos. 20000.00 20000.00
Output against per zone,Built-in Battery Charger, Excluding Batteries
(Certified by LPCB)
16 Zone, 3 Programmable Sounder Circuit, 1 Fire Alarm Output, 1 Fault
Output, 1 Disalbe/Supervisory Output,1 AUX power output, Repeater
119 1 Nos. 20000.00 20000.00
Output against per zone,Built-in Battery Charger, Excluding Batteries
(Certified by LPCB)
Providing and fixing of control panel 2 zone for fire alarm system
120 1 Nos. 17500.00 17500.00
complete as per the requirement of the system
Conventional Combination Heat Photoelectric Smoke Detector, With
121 Remote Indicator Output and Magnetic Test Function, Without Base 1 Nos. 900.00 900.00
(Certified by LPCB)
Conventional Photoelectric Smoke Detector, With Remote Indicator
122 Output and Magnetic Test Function, Without base (Certified by LPCB) 1 Nos. 1550.00 1550.00

Conventional Manual call point , With Remote Indicator Output and

123 1 Nos. 1000.00 1000.00
Magnetic Test Function, Without base (Certified by LPCB)
Conventional sounder cum strobe, With Remote Indicator Output and
124 1 Nos. 1500.00 1500.00
Magnetic Test Function, With base (Certified by LPCB)
1.5 SQMM 2 CORE RED CABLE ARMD FRLS WITH GRIP, SCREW,
125 1 RMT 115.00 115.00
SADDLE (MTR)
ABC Fire Extinguisher (MAP 50 Based Portable Stored Pressure) 6kg
126 Wall Mounted 1 Nos. 2650.00 2650.00

CO2 Fire Extinguisher (Stored Pressure) 4.5kg Wall Mounted

127 1 Nos. 5850.00 5850.00
128 CO2 Fire Extinguisher (Stored Pressure) 2kg Wall Mounted 1 Nos. 4550.00 4550.00
Providing and wet drilling accurate and clean holes of
specified diameter in RCC walls, slabs, beam or any other
RCC memberwithout vibration by core cutting (diamond
drilling) machine of HILTI or equivalent including scaffolding,
129 1 Nos. 800.00 800.00
safety majors, disposing the debris, cleaning for all levels/ all
height as per structural consultant's drawing, after approval of
engineer in charge etc compete. Holes shall made by
authorized approved agency. a) Holes Up to 75 mm dia
ITEM
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
NO
Providing and wet drilling accurate and clean holes of
specified diameter in RCC walls, slabs, beam or any other
RCC member without vibration by core cutting (diamond
drilling) machine of HILTI or equivalent including scaffolding,
130 1 Nos. 900.00 900.00
safety majors, disposing the debris, cleaning for all levels/ all
height as per structural consultant's drawing, after approval of
engineer in charge etc compete. Holes shall made by
authorized approved agency. a) Holes of 110 mm dia
Providing and wet drilling accurate and clean holes of
specified diameter in RCC walls, slabs, beam or any other
RCC memberwithout vibration by core cutting (diamond
drilling) machine of HILTI or equivalent including scaffolding,
131 1 Nos. 1100.00 1100.00
safety majors, disposing the debris, cleaning for all levels/ all
height as per structural consultant's drawing, after approval of
engineer in charge etc compete. Holes shall made by
authorized approved agency. a) Holes of 160 mm dia
Demolition including stacking of serviceable materilas and disposal of
132 1 Cum 1214.51 1214.51
unserviceable materials with all lead and lift. (i) R.C.C. work
Demolition of Brick work and stone masonry including stacking of
133 serviceable materilas and disposal of unserviceable materials with all 1 Cum 631.62 631.62
lead and lift.(ii) In Cement Mortar.
Excavation for foundation upto 1.5 m depth including sorting out
134 and stacking of useful materials and disposing off the excavated 1 Cum 240.15 240.15
stuff upto 50 Meter lead.(A) Loose or soft soil
Filling available excavated earth (excluding rock) in trenches.
plinth, sides of foundations etc. in layers not exceeding 20 cm. in
135 1 Cum 153.62 153.62
depth consolidating each disposited layer by ramming and
watering.