F85RN
User-friendly operability with essential functions
1 Simple teaching using a single button
Simple to sequentially select from
four teaching modes using the [SET] button.
[SET] button
Four types of teaching mode are available
Two-point teaching mode Release the button to
complete the operation.
Position teaching mode Release the button to
complete the operation.
Maximum sensitivity teaching mode
Release the button to
complete the operation.
Full auto teaching mode
Release the button to
complete the operation.
2 Easy to use with a large display and only three operation buttons
Two large clear 4-digit, 7-segment LED displays and three raised buttons with positive click feedback,
making mode setting easy.
UP
SET DOWN
3 Mutual interference prevention function
Equipped with an optical transmission type mutual interference prevention function
to suppress the interference between up to eight units. (Standard and Long mode)
■ Detecting distance
Detecting Detecting distance（㎜）
Appearance Model
method Long（Long） standard
（Stnd）High speed（H-SP）
FR5BC Reflective 500 330 160
Through
FT5BC 1300 800 360
beam
Optical transmission window
Useful functions
4 Two displacement display options available Detection allowance can be checked by
comparing the percentage values of each
Light intensity received by two or more sensors can be easily
sensor operation through the displace-
read and compared by two displacement display options: Percent-
ment display.
age for Through Beam type, and Zero Offset for Reflective type.
(The below examples show deterioration in
detection allowance of Through Beam type.)
Display values differ Display values match
OK
■Percentage display (through beam) Sensor①
UP
SET DOWN
OK
■Zero offset display (reflective) Sensor②
UP
SET DOWN
Broken optic fiber?
NG Dirt contamination?
Sensor③
UP
5 Light source intensity adjustment (Automatic/Manual) SET DOWN
Light intensity is adjusted to an optimum level for detection
among 15 stages (13 stages at high-speed mode).
㻭㼐㼖㼡㼟㼠㼙㼑㼚㼠㻌㼛㼒㻌㼘㼕㼓㼔㼠
㼟㼛㼡㼞㼏㼑㻌㼕㼚㼠㼑㼚㼟㼕㼠㼥
㻯㼘㼛㼟㼑㻌㼐㼕㼟㼠㼍㼚㼏㼑㻌
㼐㼑㼠㼑㼏㼠㼕㼛㼚㻦㻌㻰㼕㼟㼍㼎㼘㼑㼐 㻰㼑㼠㼑㼏㼠㼍㼎㼘㼑
㻭㼐㼖㼡㼟㼠㼙㼑㼚㼠㻌㼛㼒㻌㼘㼕㼓㼔㼠
㼟㼛㼡㼞㼏㼑㻌㼕㼚㼠㼑㼚㼟㼕㼠㼥
㻿㼑㼙㼕㻙㼠㼞㼍㼚㼟㼜㼍㼞㼑㼚㼠 㻰㼑㼠㼑㼏㼠㼕㼛㼚㻌㼛㼒
㼣㼛㼞㼗㼜㼕㼑㼏㼑 㼟㼑㼙㼕㻙㼠㼞㼍㼚㼟㼜㼍㼞㼑㼚㼠 㻰㼑㼠㼑㼏㼠㼍㼎㼘㼑
㼣㼛㼞㼗㼜㼕㼑㼏㼑㻦㻌㻰㼕㼟㼍㼎㼘㼑㼐
6 NPN/PNP dual output
As both connection types for the control output are available,
configuring the output as PNP or NPN is not necessary.
7 An energy-saving design and ECO mode realize low power consumption
24V normal mode : 770 mW or less / ECO mode: 600 mW or less
8 Manuals can be viewed on smartphones or tablets
The sensor comes with a QR code label and a quick reference
guide is available on your smartphone or tablet (Japanese,
English, Chinese, and Korean versions available). This is useful
when checking the manual or changing the settings at instal-
lation site.
NOTE
T his functio n re quire s a
device that can scan the
QR code, connect to the
Internet and display a PDF
file. For details please refer
to the instruction manual of
the device.
QR code label on the sensor
(illustrative purpose only)
■ RATING/PERFORMANCE/SPECIFICATION
Model F85RN
Power supply 12 to 24 V DC ±10% / Ripple 10% or less
Normal mode : 770 mW or less (32 mA or less at 24 V)
Power consumption
ECO mode : 600 mW or less (25 mA or less at 24 V)
NPN open collector output / Load current 100 mA (30 V DC) or less / Residual voltage: 1 V or less
Control output
PNP open collector output / Load current 100 mA (30 V DC) or less / Residual voltage: 2 V or less
Operation mode Light ON/Dark ON
ON delay / OFF delay / ON/OFF delay / One shot/ No timer
Timer
Delay timer: 1 to 9999 ms (set in milliseconds)
Response time High speed mode: 65 μs or less / Standard mode: 500 μs or less / Long mode: 4 ms or less
Light source (wavelength) Four-element (AlGaInp) red LED (660 nm)
Indicator Operation indicator, Setting indicator, Light ON / Dark ON indicator: orange LED
Received light level: 4 digits in red LED (high-speed mode (0 to 3800), standard / long mode (0 to 9999))
Display
Threshold: 4 digits in green LED (high-speed mode (0 to 3500), standard / long mode (0 to 9700))
Teaching and set switch (SET)
Switch
Switch for threshold adjustment (UP/DOWN)
Sensitivity setting 2-point teaching / Max. sensitivity teaching / Full auto teaching / Position teaching
Sensitivity adjustment Provided (manual)
Light source intensity adjustment Provided (automatic/manual)
Mutual Interference prevention UP to 8 units (standard / long mode)
Protection circuit Power supply reverse connection protection / Output short circuit protection
Material Polycarbonate
Wiring 2 m attached cable (Outer dimension: dia. 4.2 mm) 0.2 ㎟ , 4 cores
Weight Approx. 75 g
Accessory Instruction maual / QR code label for simplified manual
■ ENVIRONMENTAL SPECIFICATION
Ambient light Illumination on light receiving surface: 3,500 lx or less (incandescent lamp)
1 to 5 adjacent units in operation: -25 to +55℃ 6 or more adjacent units in operation: -25 to +50℃
Ambient temperature
Storage: -40 to +70℃ (non-freezing, non-condensing)
Ambient humidity 35 to 85% RH (non-condensing)
Protective structure IP40
Vibration 10 to 55 Hz / 1.5 mm double amplitude / 2 hours each in X, Y, and Z directions
Shock 500 m/ｓ2 / 3 times each in X, Y and Z directions
Dielectric withstanding 1000 V AC for 1 minute
Insulation resistance 500 V DC mega, 20 MΩ or more
■ DIMENSIONS (in mm) ◦FIBER AMPLIFIER
Model
F85RN
◦MOUNTING BRACKET
Model
AC-BF3
◦TERMINAL UNIT
Model
FA7EU
This product is designed for industrial applications to detect a various kinds of objects. It has no function to prevent disasters, accidents, death or injuries.
TAKEX will not held responsible for any damage or loss incurred due to accidents, faulty installation, abuse, misuse, improper maintenance or acts of God including
lightning surge.
This product cannot be used as safety equipment.
CAUTION This product is designed and manufactured for industrial use. It cannot be used where there is a requirement for a high degree of reliabilty or considerable care
or attention to safety.
Read this instruction manual carefully and use the product properly according to it.
This instruction manual including the specifications and dimensions may be subject to change without notice.
TAKENAKA ELECTRONIC INDUSTRIAL CO.,LTD.
20-1 Shinomiya Narano-cho, Yamashina, Kyoto 607-8032 Japan
Tel: +81-75-581-7111 Fax: +81-75-581-7118
URL : http://www.takex-elec.co.jp email : info-ex@takex-elec.co.jp
