Scribd
Upload
25 views2 pages

Catalogue

The document outlines an offer (Q11666-1) for PT Jaya Timur Intinusa, detailing the specifications of a textile conveyor belt and its packaging. It includes technical data such as belt dimensions, strength, and material properties, along with packaging details like the use of steel drums and wooden pallets. The technical data sheet is prepared by the Technical Department and is valid for the specific offer only.

Uploaded by

salesjayatimurjia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
25 views2 pages

Catalogue

The document outlines an offer (Q11666-1) for PT Jaya Timur Intinusa, detailing the specifications of a textile conveyor belt and its packaging. It includes technical data such as belt dimensions, strength, and material properties, along with packaging details like the use of steel drums and wooden pallets. The technical data sheet is prepared by the Technical Department and is valid for the specific offer only.

Uploaded by

salesjayatimurjia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

OFFER Q11666-1

FOR PT Jaya TimurIntinusa

Standard EP (Canvas with pallet)


STEEL DRUM + WOODEN PALETTE + PE FILM

STEEL DRUM - Shaft hole 100 mm square


HDPE Blue Fabric - Plain for wrapping Roll
HDPE Blue Fabric - Plain for packing like drum from both sides
Corded Strips - Tightened with buckles at four places
Wooden Pallet – Combination of Square wood & Wood Strips along with triangular supports
Labeling: Customer details, material details are attached

PAGE 4 / 8 INNOVATIVE CONVEYOR BELT TECHNOLOGY


OFFER Q11666-1
FOR PT Jaya TimurIntinusa

TECHNICAL DATA SHEET FOR A TEXTILE CONVEYOR BELT

1000 Multitrans 630/4 6+2 X ME

CHARACTERISTIC UNIT VALUE

1 BASIC INFORMATION

1.1 Belt width mm ISO 251 1000 ±1 %

1.2 Strength of belt N/mm ISO 283 min. 630

1.3 Top cover thickness mm ISO 583 6.0 -5 %/+free

1.4 Bottom cover thickness mm ISO 583 2.0 -0.2 mm/+free

1.5 Rubber grade - Sempertrans X

1.6 Edge type - Moulded edges

1.7 Total belt thickness mm ISO 583 12.2 ±10 %

1.8 Weight of belt kg/m - approx. 13.8

Elongation under reference load


1.9 % ISO 283 max. 2.5 %
(10%)
1.10 Belt length tolerance % - -0/+2.5 %

2 CARCASS

2.1 Number of plies - - 4

3 TOP COVER RUBBER

offered value typical value

3.1 Tensile strength MPa - min. 25.0 25.5

3.2 Elongation at break % - min. 450 550.0

3.3 Abrasion resistance mm³ - max. 120 80.0

3.4 Hardness Shore A ISO 48-4 65 65 ±5

4 ADHESION

offered value typical value

4.1 Top cover to ply N/mm min. 4.5 10

4.2 Bottom cover to ply N/mm min. 4.5 10

4.3 Ply to ply N/mm min. 5.5 10

DATE 3/26/2024

PREPARED BY Technical Department

This Technical Data Sheet is valid for the offer mentioned above, only. It shows the value which is typically achieved on a final product. Results of specific
products may show variations due to the nature of processing rubber.

PAGE 5 / 8 INNOVATIVE CONVEYOR BELT TECHNOLOGY

You might also like