Aim: Realization of logic functions with the help of Universal Gates (NAND, NOR)
Virtual Lab:
https://de-iitr.vlabs.ac.in/exp/realization-of-logic-functions/
Theory:
Introduction
Logic gates are electronic circuits which perform logical functions on one or more inputs to
produce one output. There are seven logic gates. When all the input combinations of a logic gate
are written in a series and their corrresponding outputs written along them, then this input/ output
combination is called Truth Table.
1)Nand gate as Universal gate
NAND gate is actually a combination of two logic gates i.e. AND gate followed by NOT gate.
So its output is complement of the output of an AND gate.This gate can have minimum two
inputs. By using only NAND gates, we can realize all logic functions: AND, OR, NOT, Ex-OR,
Ex-NOR, NOR. So this gate is also called as universal gate.
1.1)NAND gates as OR gate
From DeMorgan’s theorems:
(A.B)’ = A’ + B’
(A’.B’)’ = A’’ + B’’ = A + B
So, give the inverted inputs to a NAND gate, obtain OR operation at output.
1.2)NAND gates as AND gate
A NAND produces complement of AND gate. So, if the output of a NAND gate is inverted,
overall output will be that of an AND gate.
Y = ((A.B)’)’
Y = (A.B)
1.3)NAND gates as Ex-OR gate
The output of a two input Ex-OR gate is shown by: Y = A’B + AB’. This can be achieved with
the logic diagram shown in the left side.
1.4)NAND gates as Ex-NOR gate
Ex-NOR gate is actually Ex-OR gate followed by NOT gate. So give the output of Ex-OR gate to
a NOT gate, overall output is that of an Ex-NOR gate.
Y = AB+ A’B’
1.5) Implementing the simplified function with NAND gates only
We can now start constructing the circuit. First note that the entire expression is inverted and we
have three terms ANDed. This means that we must use a 3-input NAND gate. Each of the three
terms is, itself, a NAND expression. Finally, negated single terms can be generates with a 2-input
NAND gate acting as an inverted. The expression illustrates a circuit using NAND gates only.
F=((C'.B.A)'(D'.C.A)'(C.B'.A)')'
The stepwise simplication of this expression is done on the basis of this logic diagram in Figure
9:
2)Nor gate as Universal Gate
NOR gate is actually a combination of two logic gates: OR gate followed by NOT gate. So its
output is complement of the output of an OR gate.This gate can have minimum two inputs,
output is always one. By using only NOR gates, we can realize all logic functions: AND, OR,
NOT, Ex-OR, Ex-NOR, NAND. So this gate is also called universal gate.
2.1)NOR gates as OR gate
A NOR produces complement of OR gate. So, if the output of a NOR gate is inverted, overall
output will be that of an OR gate.
Y = ((A+B)’)’
Y = (A+B)
2.2)NOR gates as AND gate
From DeMorgan’s theorems:
(A+B)’ = A’B’
(A’+B’)’ = A’’B’’ = AB
So, give the inverted inputs to a NOR gate, obtain AND operation at output
2.3)NOR gates as Ex-OR gate
Ex-OR gate is actually Ex-NOR gate followed by NOT gate. So give the output of Ex-NOR gate
to a NOT gate, overall output is that of an Ex-OR gate.
Y = A’B+ AB’
2.4)NOR gates as Ex-NOR gate
The output of a two input Ex-NOR gate is shown by: Y = AB + A’B’. This can be achieved with
the logic diagram shown in the left side.
2.5)Constructing a circuit with NOR gates only
Designing a circuit with NOR gates only uses the same basic techniques as designing a circuit
with NAND gates; that is, the application of deMorgan’s theorem. The only difference between
NOR gate design and NAND gate design is that the former must eliminate product terms and the
later must eliminate sum terms.
F=(((C.B'.A)+(D.C'.A)+(C.B'.A))')'
Procedure:
Step-1) Select and drag "" for generating wire of the circuit.
Step-2)Join the wire to perform the required logic.
Step-3) Click on check button to check the connections.
Step-4) If connections are wrong click on reset button to reset connections.
Note: Follow these steps for all experiments.
Paste your simulation result screen shot here:
(Simulation 1)
Conclusion:
