ASME Y14.
45-2021
Measurement
Data Reporting
Engineering Product Definition and
Related Documentation Practices
A N A M E R I C A N N AT I O N A L STA N DA R D
ASME Y14.45-2021
Measurement
Data Reporting
Engineering Product Definition and
Related Documentation Practices
AN AMERICAN NATIONAL STANDARD
Two Park Avenue • New York, NY • 10016 USA
x
Date of Issuance: December 31, 2021
This Standard will be revised when the Society approves the issuance of a new edition.
Periodically certain actions of the ASME Y14 Committee may be published as Cases. Cases are published on the ASME website
under the Y14 Committee Page at http://go.asme.org/Y14committee as they are issued.
Errata to codes and standards may be posted on the ASME website under the Committee Pages to provide corrections to
incorrectly published items, or to correct typographical or grammatical errors in codes and standards. Such errata shall be used
on the date posted.
The Y14 Committee Page can be found at http://go.asme.org/Y14committee. There is an option available to automatically
receive an e-mail notification when errata are posted to a particular code or standard. This option can be found on the
appropriate Committee Page after selecting “Errata” in the “Publication Information” section.
ASME is the registered trademark of The American Society of Mechanical Engineers.
This code or standard was developed under procedures accredited as meeting the criteria for American National Standards. The Standards
Committee that approved the code or standard was balanced to assure that individuals from competent and concerned interests have had an
opportunity to participate. The proposed code or standard was made available for public review and comment that provides an opportunity
for additional public input from industry, academia, regulatory agencies, and the public-at-large.
ASME does not “approve,” “rate,” or “endorse” any item, construction, proprietary device, or activity.
ASME does not take any position with respect to the validity of any patent rights asserted in connection with any items mentioned in this
document, and does not undertake to insure anyone utilizing a standard against liability for infringement of any applicable letters patent, nor
assume any such liability. Users of a code or standard are expressly advised that determination of the validity of any such patent rights, and the
risk of infringement of such rights, is entirely their own responsibility.
Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted as government or industry
endorsement of this code or standard.
ASME accepts responsibility for only those interpretations of this document issued in accordance with the established ASME procedures
and policies, which precludes the issuance of interpretations by individuals.
No part of this document may be reproduced in any form,
in an electronic retrieval system or otherwise,
without the prior written permission of the publisher.
The American Society of Mechanical Engineers
Two Park Avenue, New York, NY 10016-5990
Copyright © 2021 by
THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS
All Rights Reserved
Printed in U.S.A.
