Powerology
Dual Microphone
Professional Set
SKU: PMLV2CMIC
Table of Contents
Overview 2
A. Charging Compartment 2
B. Receiver Overview 2
C. Transmitter Function Overview 4
Instructions for Use 6
Specifications 9
Package Contents 10
Safety Precautions 10
Disposal 11
Warranty 11
Contact Us 11
1
Overview
A. Charging Compartment
When charging the charging compartment or the Wireless Lavalier
Microphone from the charging compartment, the current battery
level indicator will be displayed.
1. Battery Indicator Light
2. Type-C Charging Port
B. Receiver Overview
6. Charging Indicator Lights
5. Mic 2 Connection 4. Mic 1 Connection Indicator
Indicator
1. Charge, Monitor 3. Power Button
Audio
2.3.5mm Interface
7. Charging, 8. Touch Area
Transmission
2
1. Charge, Monitor Audio:
You can charge the device through this interface using a Type-C
charging cable. When using a phone charger, you can simultaneously
charge both the receiver and your phone. If you connect a Type-C
earphone, it allows you to monitor and return sound to your ears.
2.3.5mm Interface:
When recording vlogs with a camera, connect the camera-specific
cable to this interface and the camera.
3. Power Button:
Press and hold the power button for 2 seconds to power on the
device. The normal and transmitter modes will automatically turn
on and pair once the battery compartment is removed. Press the
power button 5 times to enter pairing mode. If you need to pair
after changing devices, press the button 5 times along with the
transmitter. The device comes pre-paired from the factory. If pairing
fails within 20 seconds, the device will revert to the previous pairing.
4. Mic 1 Connection Indicator Light:
The green light remains on when the receiver is connected to the
transmitter with mic 1. It will blink when there is no connection.
5. Mic 2 Connection Indicator Light:
The green light stays on when the receiver is connected to the
transmitter with mic 2. It will blink when not connected.
6. Charging Indicator Light:
The charging indicator light flashes red while the device is charging.
Once fully charged, it will stay green.
3
7. Charging/Transmission:
When connected to a phone using an adapter, you can record
videos or live stream karaoke. The adapter allows you to charge
both the receiver and the phone simultaneously.
8. Touch Area:
A touch point occurs when the charging compartment is in the
process of charging.
Note: When the battery is low, the device will flash a red light to
notify you with a shutdown reminder.
C. Transmitter Function Overview
6. Mic
2. Power Supply
1. Charge
3. Increase Volume
Monitor Audio
4. Decrease Volume
5. SM Multi-Function Button
7. Touch Area
1. Charge, Monitor Audio:
You can charge the device through this interface using a Type-C
charging cable. If you connect a Type-C earphone, you can use it
to monitor the audio and return sound to your ears.
2. Power Button:
4
Press and hold for 2 seconds to turn the device on or off. It will
automatically turn on and pair with the receiver when removed from
the case. Press the button 5 times to enter pairing mode (you need
to press it 5 times along with the receiver). The device comes pre-
paired from the factory. If you need to pair it after switching devices
use this option. If pairing fails within 20 seconds, it will revert to the
previous pairing. Single-click to mute or unmute the microphone
and light up the screen. Double-click to toggle the Bluetooth
function of the microphone, allowing pairing with a mobile phone.
3. Increase Volume:
Press and hold the button to increase the volume. Single-click to
select the function (Noise Reduction/Reverberation/Sound Card).
There are two levels of noise reduction and reverberation, and
three types of sound card effects.
4. Decrease Volume:
Press and hold the button to decrease the volume. Single-click to
select the function (Noise Reduction/Reverberation/Sound Card).
There are two levels for noise reduction and reverberation, and
three types of sound card effects.
5. SM Multi-Function Button:
Press and hold the M multi-function button to enter mode selection
(VLOG Video/Live Broadcast). Short press to select the function
(Noise Reduction/Reverberation/Sound Card).
6. MIC:
Used for voice recording. When using the recording function, ensure
the microphone is pointed towards the sound source.
5
7. Touch Area:
Battery compartment contact.
Note
1. The screen will automatically turn off after 15 seconds of inactivity.
Press any button to turn the screen back on.
2. When Bluetooth is turned on, the display will show white. When
turned off, it will show gray.
3. When mute is activated, the display will show white. When not
muted, it will show gray.
4. The 4-grid battery display will flash red to indicate low battery.
5. When recording, the bar will display white. If the recording hasn’t
started, it will show gray.
6. Once the transmitter and receiver are successfully paired with
your current phone, to pair with another phone, place them back
into the charging compartment before connecting for audio
recording. Do not directly switch between phones as this may cause
the recording to fail.
Instructions for Use
1. How to connect to phone recording/video:
1.1 Turn on the receiver and transmitter by opening the battery
compartment.
1.2 Connect the corresponding adapter and receiver to the phone.
1.3 After turning on the transmitter, select the desired modes and
functions, then open the phone's recording function or the relevant
app to record videos, etc.
Note: Most Android phones do not support built-in camera recording.
For specific mode and function selection, please refer to the
transmitter instructions.
6
Activate VOLG Mode
Press and hold the M button to access multi-function options, and
choose between VLOG video mode and live stream mode.
VLOG Video Live Stream
Sound Card Type 3
Noise Reduction
Level 1 Sound Card Type 2
Noise Reduction
Level 2
Sound Card Type 1
Reverb Level 2
Noise Reduction Off Reverb Off Reverb Level 1
2. How to connect to phone live broadcast:
2.1 Turn on the receiver and transmitter by opening the battery
compartment.
2.2 Connect the corresponding adapter and receiver to the phone.
2.3 After turning on the transmitter, select the desired modes and
functions, and connect another phone via Bluetooth as the live
broadcast accompaniment.
2.4 Open the live broadcast app on the phone to start broadcasting
directly.
Note: After turning on the transmitter, select the desired modes
and functions, and connect another phone via Bluetooth as the live
7
broadcast accompaniment. Then, open the live broadcast app on
the phone to start broadcasting directly.
Note: Most Android phones do not support built-in camera recording.
Activate the live
broadcast mode.
Press and hold the M button to access multi-function options, and
choose between VLOG video mode and live stream mode.
3. Method of connecting the camera for audio/video recording:
3.1 First, turn on the receiver and transmitter by opening the battery
compartment.
3.2 Connect the corresponding adapter and receiver to the phone.
3.3 After turning on the transmitter, select the desired modes and
functions, then open the camera to start recording audio and video.
Camera Conversion Cable Receiver
8
Specifications
A. Microphone
Latency 60ms
Bluetooth Version 5.2
Bluetooth Name PMLV2CMIC
Frequency 2.4GHz
Frequency Range 20Hz to 20kHz
Transmission Rate 2Mbps
SNR 95dB
Battery Capacity 450mAh
Working Time 7H
B. Receiver
Latency 60ms
Frequency 2.4GHz
Frequency Range 20Hz to 20kHz
Battery Capacity 400mAh
Working Time 16h
C. Charging Compartment
Input DC 5V/1A
Battery Capacity 2000mAh
Recharge Time 2h
Charging Port Type-C
Operating Temperature -40°C to 80°C
Product Size 60×54×114mm
Working Time 17h
9
Package Contents
1. Charging Case
2. Transmitter
3. Receiver
4.3.5mm Audio Cable
5. Camera Cable
6. Charging Cable
7. Windproof Microphone
8. Type-C Earphone
9. Storage Bag
Safety Precautions
1. Please disconnect the charger and turn off the device before
cleaning.
2. Non-professionals should not attempt to disassemble the
device, as this may cause malfunctions and void the warranty.
3. Do not place the device in direct sunlight to prevent premature
aging of electronic components.
4. Avoid placing the device in extremely cold or hot environments
as this may cause malfunctions.
5. It is recommended to use the device within an ambient temperature
range of -10°C to 40°C, with a relative humidity of 10 % to 95 %.
6. Do not insert any objects into the device to avoid short circuits
or damage to the circuitry. Avoid spilling liquids on the product.
7. Avoid collisions with hard objects to prevent surface scratches
detachment, or other hardware damage.
8. Do not the product to overheated environments, such as direct
sunlight, fire, or high temperatures.
10
Disposal
This product must not be disposed of as unsorted household waste.
It is important to separate such waste for proper treatment and
recycling, in compliance with local waste management regulations.
Warranty
Products that you buy directly from our Powerology website or shop
come with a 24-month warranty.
The 24-month warranty applies to products purchased directly from
our Powerology website or store. If Powerology products are bought
from any of our verified retailers, then the product is eligible for only
a 12-month warranty. To extend your product’s warranty, visit our
website powerology.me/warranty and fill in your details in the
provided form along with an uploaded picture of the product to
process your request. Once approved, you will receive a confirmation
email of the extended product warranty. Upload the required
information within 48 hours of purchase to be eligible for a 24-month
warranty period.
For more info, please check:
powerology.me/warranty
Contact Us
If you have any questions about this Privacy Policy, please contact
us at: hey@powerology.me
Website: powerology.me
Instagram: powerology_official
Facebook: powerology.ME
11
