Dell VxRail 8.0.

x
Release Notes

June 2024
Rev. 15
Notes, cautions, and warnings

NOTE: A NOTE indicates important information that helps you make better use of your product.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid
the problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

© 2023 -2024 Dell Inc. or its subsidiaries. All rights reserved. Dell Technologies, Dell, and other trademarks are trademarks of Dell Inc. or its
subsidiaries. Other trademarks may be trademarks of their respective owners.
 Contents
Revision history..........................................................................................................................................................................5

Chapter 1: Introduction................................................................................................................. 6
VxRail overview....................................................................................................................................................................6

Chapter 2: VxRail 8.0.xxx.............................................................................................................. 8

VxRail 8.0.212 Package Software.................................................................................................................................... 8
What is new in VxRail 8.0.212...........................................................................................................................................8
Fixed issues in VxRail 8.0.212........................................................................................................................................... 9
VxRail 8.0.211 Package Software.....................................................................................................................................9
What is new in VxRail 8.0.211..........................................................................................................................................10
Fixed issues in VxRail 8.0.211...........................................................................................................................................10
VxRail 8.0.210 Package Software.................................................................................................................................. 10
What is new in VxRail 8.0.210..........................................................................................................................................11
Fixed issues in VxRail 8.0.210..........................................................................................................................................12
Known issues in VxRail 8.0.210.......................................................................................................................................14
VxRail 8.0.120 Package Software.................................................................................................................................. 14
What is new in VxRail 8.0.120......................................................................................................................................... 15
VxRail 8.0.201 Package Software.................................................................................................................................. 15
What is new in VxRail 8.0.201......................................................................................................................................... 16
VxRail 8.0.111 Package Software....................................................................................................................................16
What is new in VxRail 8.0.111........................................................................................................................................... 17
Fixed issues in VxRail 8.0.111............................................................................................................................................17
VxRail 8.0.200 Package Software................................................................................................................................. 18
What is new in VxRail 8.0.200........................................................................................................................................ 18
Known issues in VxRail 8.0.200...................................................................................................................................... 19
Fixed issues in VxRail 8.0.200.........................................................................................................................................19
VxRail 8.0.110 Package Software.................................................................................................................................. 20
What is new in VxRail 8.0.110......................................................................................................................................... 20
Known issues in VxRail 8.0.110........................................................................................................................................21
VxRail 8.0.101 Package Software................................................................................................................................... 21
What is new in VxRail 8.0.101......................................................................................................................................... 22
Fixed issues in VxRail 8.0.101..........................................................................................................................................22
Known issues in VxRail 8.0.101....................................................................................................................................... 23
VxRail 8.0.100 package software.................................................................................................................................. 23
What is new in VxRail 8.0.100........................................................................................................................................ 23
Fixed issues in VxRail 8.0.100.........................................................................................................................................26
Known issues in VxRail 8.0.100...................................................................................................................................... 28
VxRail 8.0.020 package software..................................................................................................................................28
What is new in VxRail 8.0.020....................................................................................................................................... 29
Fixed issues in VxRail 8.0.020........................................................................................................................................ 30
VxRail 8.0.010 package software................................................................................................................................... 31
What is new in VxRail 8.0.010......................................................................................................................................... 31
Known issues in VxRail 8.0.010...................................................................................................................................... 32
VxRail 8.0.000 package software..................................................................................................................................32

Contents 3
 What is new in VxRail 8.0.000....................................................................................................................................... 33
Known issues in VxRail 8.0.000..................................................................................................................................... 34

Chapter 3: Upgrades................................................................................................................... 35
SolVe Online for VxRail.................................................................................................................................................... 36
Direct upgrade paths........................................................................................................................................................36
VxRail 8.0.x upgrade methods........................................................................................................................................37

4 Contents
 Revision history
Date Revision Description of change
June 2024 15 Updated for VxRail 8.0.212.
April 2024 14 Updated for VxRail 8.0.211.
March 2024 13 Updated for VxRail 8.0.210.
December 2023 12 Updated for VxRail 8.0.120.
December 2023 11 Updated for VxRail 8.0.201.
November 2023 10 Updated for VxRail 8.0.111.
November 2023 9 Updated for VxRail 8.0.200.
August 2023 8 Updated for VxRail 8.0.110.
July 2023 7 Updated for VxRail 8.0.101.
June 2023 6 Updated the TPM 1.2 information for VxRail 8.0.100.
June 2023 5 Updated for VxRail 8.0.100.
March 2023 4 Updated for VxRail 8.0.020.
February 2023 3 Added note for LCM upgrades with TPM 1.2 modules.
January 2023 2 Updated for VxRail 8.0.010.
January 2023 1 Updated for VxRail 8.0.000.

Revision history 5
 1
Introduction
The release notes contain supplemental information about VxRail 8.0.x software.
The target audience for this document includes customers, field personnel, and partners who want to manage and operate
VxRail clusters.
For the most up-to-date list of VxRail documentation, see the Dell VxRail Documentation Quick Reference List.
The following software versions are in these release notes:
● VxRail 8.0.212
● VxRail 8.0.211
● VxRail 8.0.210
● VxRail 8.0.201
● VxRail 8.0.200
● VxRail 8.0.120
● VxRail 8.0.111
● VxRail 8.0.110
● VxRail 8.0.101
● VxRail 8.0.100
● VxRail 8.0.020
● VxRail 8.0.010
● VxRail 8.0.000

Upgrades
For supported upgrade paths, see Supported upgrade paths.

Entitlement
This Dell product uses an embedded Linux distribution which is licensed to Dell. This embedded Linux is only authorized to be
used to operate the Dell product and only the Dell product.

VMware documentation
VMware provides the following release notes and additional documentation that is not specific to VxRail. For more information,
see VMware vSphere documentation.

VxRail overview
VxRail uses PowerEdge server platforms and HCI system software to deliver virtualization, compute, and storage to enable deep
integration across the VMware ecosystem.
The VxRail software bundle includes the following:
● VxRail Manager
● VMware vSphere, including VMware ESXi
● VMware vCenter Server
● VMware vSAN
VxRail HCI system software includes complementary applications such as RecoverPoint for VMs.

6 Introduction
VMware vCenter Server
VxRail can join an existing customer-managed VMware vCenter Server during initial configuration to manage multiple VxRail
clusters from a single pane-of-glass.

Introduction 7
 2
VxRail 8.0.xxx
This section describes VxRail version 8.0.xxx releases.

VxRail 8.0.212 Package Software

This section lists the components of the VxRail 8.0.212 software package.

VxRail Software
● VxRail Manager 8.0.212 build 28608598
● VxRail System 8.0.212 build 28608599
● VxRail Manager VMware vCenter Plugin 8.0.212.0

VMware integration
● VMware ESXi 8.0 Update 2c build 23825572
● VMware vCenter Server Appliance 8.0 Update 2b build 23319993
● VMware vSAN 8.0 Update 2c build 23825572

PowerEdge platform components

● BIOS:
○ G560/F: 2.21.0
○ D560/F: 2.21.1
○ E560/F/N, P570/F, V570/F, S570：2.21.2
○ P580N：2.21.0
○ V670F, P670F/N, E660/F/N, S670: 1.13.2
○ E665/F/N, P675F/N: 2.14.1
○ VD-4510c, VD-4520c: 1.14.1
○ VD-4000w: 1.4.1
○ VE-660, VP-760: 2.1.5
● iDRAC:
○ G560/F, D560/F, E665/F/N, E560/F/N, P570/F, V570/F, S570, P580N: 7.00.00.171
○ V670F, P670F/N, E660/F/N, S670, P675F/N: 7.10.30.00
○ VD-4510c, VD-4520c: 7.10.30.00
○ VE-660, VP-760: 7.10.30.05
● iSM: 5.3.0.0.3289

What is new in VxRail 8.0.212

VxRail 8.0.212 includes the new VMware ESXi 8.0 Update 2c, VMware vCenter 8.0 Update 2b (same as VxRail 8.0.210 and
8.0.211), updated firmware and other security fixes, and additional VxRail fixes for issues from previous releases.
For more information, see VMware vCenter Server 8.0 Update 2b Release Notes and VMware ESXi 8.0 Update 2c Release
Notes.

8 VxRail 8.0.xxx
Security fixes
VxRail 8.0.212 contains fixes that resolve multiple security vulnerabilities. For more information, see DSA-2024-244: Dell VxRail
Security Update for Multiple Third-Party Component Vulnerabilities which address VxRail Manager: SUSE: Multiple Security
fixes for SLES15SP4.
STIG hardening on VxRail 8.0.020 or later versions is not supported. If STIG hardening is applied to a VxRail cluster, you cannot
upgrade to VxRail 8.0.020 and later versions.

Fixed issues in VxRail 8.0.212

The following table lists the issues that are fixed in VxRail 8.0.212:

Table 1. Fixed issues in VxRail 8.0.212

Issue Issue Description Introduced in Components
VXP-81437 VxRail UI has pseudo message for German language 8.0.210 UI

VxRail 8.0.211 Package Software

This section lists the components of the VxRail 8.0.211 software package.

VxRail Software
● VxRail Manager 8.0.211 build 28535496
● VxRail System 8.0.211 build 28535497
● VxRail Manager VMware vCenter Plugin 8.0.211.0

VMware integration
● VMware ESXi 8.0 Update 2b build 23305546
● VMware vCenter Server Appliance 8.0 Update 2b build 23319993
● VMware vSAN 8.0 Update 2b build 23305546

PowerEdge platform components

● BIOS:
○ G560/F: 2.21.0
○ D560/F: 2.21.1
○ E560/F/N, P570/F, V570/F, S570：2.21.2
○ P580N：2.21.0
○ V670F, P670F/N, E660/F/N, S670: 1.13.2
○ E665/F/N, P675F/N: 2.14.1
○ VD-4510c, VD-4520c: 1.14.1
○ VD-4000w: 1.4.1
○ VE-660, VP-760: 2.1.5
● iDRAC:
○ G560/F, D560/F: 7.00.00.00
○ E560/F/N, P570/F, V570/F, S570, P580N: 7.00.00.00
○ V670F, P670F/N, E660/F/N, S670: 7.00.60.201
○ E665/F/N, P675F/N: 7.00.60.201
○ VD-4510c, VD-4520c: 7.00.60.201
○ VE-660, VP-760: 7.00.60.201

VxRail 8.0.xxx 9
● iSM: 5.3.0.0.3289

What is new in VxRail 8.0.211

VxRail version 8.0.211 includes VMware vCenter 8.0 Update 2b (same as 8.0.210), VMware ESXi 8.0 Update 2b (same as
8.0.210), updated BIOS for hardware models VE-660, VP-760, E660/F/N, P670F/N, V670F, S670, VD-4510c, VD-4520c,
E665/F/N, P675F/N, G560/F, E560/F/N, P570/F, V570/F, S570, P580N, D560/F and other security fixes, and additional
VxRail fixes for issues from previous releases.
For more information, see VMware vCenter Server 8.0 Update 2b Release Notes and VMware ESXi 8.0 Update 2b Release
Notes.

Security fixes
VxRail 8.0.211 contains fixes that resolve multiple security vulnerabilities. For more information, see the following Dell Security
Advisory (DSA):
DSA-2024-178: Dell VxRail Security Update for Multiple Third-Party Component Vulnerabilities which address:
● PowerEdge:
○ Security Update for PowerEdge Server BIOS for an Improper Parameter Initialization Vulnerability. See DSA-2024-034
for more information.
○ Security Update for PowerEdge Server BIOS for an Improper SMM Communication Buffer Verification Vulnerability. See
DSA-2024-004 for more information.
○ Security Update for PowerEdge Server BIOS for a Time-of-check Time-of-use (TOCTOU) Vulnerability. See
DSA-2024-003 for more information.
○ Security Update for PowerEdge Server BIOS for an Improper SMM Communication Buffer Verification Vulnerability. See
DSA-2024-006 for more information.
○ Security Update for Dell PowerEdge Server for Intel March 2024 Security Advisories (2024.1 IPU). See DSA-2024-005
for more information.
○ Dell PowerEdge Server Security Update for Intel Ethernet Controllers & Adapters and SPS Firmware Vulnerabilities. See
DSA-2024-001 for more information.
○ Security update for Dell AMD-based PowerEdge Server Vulnerabilities. See DSA-2024-002 for more information.
● VxRail Manager: SUSE: Multiple Security fixes for SLES15 SP4.
STIG hardening on VxRail 8.0.020 or later versions is not supported. If STIG hardening is applied to a VxRail cluster, you cannot
upgrade to VxRail 8.0.020 and later versions.

Fixed issues in VxRail 8.0.211

The following table lists the issues that are fixed in VxRail 8.0.211:

Table 2. Fixed issues in VxRail 8.0.211

Issue Issue Description Introduced in Components
VXP-78840/ VxRail upgrade, deployment/ node add failure with error Cannot 8.0.210 Day 1, Day 2,
VXP-73516 run the event loop while another loop is running LCM

VxRail 8.0.210 Package Software

This section lists the components of the VxRail 8.0.210 software package.

VxRail Software
● VxRail Manager 8.0.210 build 28476224
● VxRail System 8.0.210 build 28476225

10 VxRail 8.0.xxx
● VxRail Manager VMware vCenter Plugin 8.0.210.0

VMware integration
● VMware ESXi 8.0 Update 2b build 23305546
● VMware vCenter Server Appliance 8.0 Update 2b build 23319993
● VMware vSAN 8.0 Update 2b build 23305546

PowerEdge platform components

● BIOS:
○ G560/F, D560/F: 2.20.1
○ E560/F/N, P570/F, V570/F, S570, P580N: 2.20.1
○ V670F, P670F/N, E660/F/N, S670: 1.12.1
○ E665/F/N, P675F/N: 2.13.3
○ VD-4510c, VD-4520c: 1.13.3
○ VD-4000w: 1.4.1
○ VE-660, VP-760: 1.6.6
● iDRAC:
○ G560/F, D560/F: 7.00.00.00
○ E560/F/N, P570/F, V570/F, S570, P580N: 7.00.00.00
○ V670F, P670F/N, E660/F/N, S670: 7.00.60.201
○ E665/F/N, P675F/N: 7.00.60.201
○ VD-4510c, VD-4520c: 7.00.60.201
○ VE-660, VP-760: 7.00.60.201
● iSM: 5.3.0.0.3289

What is new in VxRail 8.0.210

VxRail 8.0.210 includes the new VMware vCenter 8.0 Update 2b, VMware ESXi 8.0 Update 2b, new features, enhancements to
existing features, security fixes, and additional VxRail fixes for issues from previous releases.
For more information, see VMware vCenter Server 8.0 Update 2b Release Notes and VMware ESXi 8.0 Update 2b Release
Notes.
This release includes the following new features:
● Platform and hardware support:
○ VxRail 8.0.210 is the first VxRail 8.x release to support 14G, 15G, and 16G VxRail platforms. The following hardware
models for 14G, 15G, and 16G are supported:
￭ 14G: G560/F, E560/F/N, D560/F, P570/F, V570/F, S570, P580N
￭ 15G: V670F, P670F/N, E660/F/N, S670, E665/F/N, P675F/N, VD-4510c, VD-4520c, and VD-4000w
￭ 16G: VE-660 (All NVMe, all flash, and hybrid), VP-760 (All NVMe, all flash, and hybrid)
○ VMware vSAN Express Storage Architecture (ESA) support on the VD-4000 platform.
● LCM enhancements:
○ Support for VMware ESXi Quick Boot enablement in VxRail Manager for vLCM mode only to reduce cluster update time.
○ Support for common API across LCM and vLCM modes for bundle upload operations.
○ VxRail dynamic node cluster support for vLCM parallel remediation to reduce cluster update time.
○ Support for vLCM staging allows you to prestage installation files before the cluster update.
● Increased flexibility:
○ Support for IPv6 and dual stack (IPv4 and IPv6) to install VxRail standard clusters running VMware vSAN OSA.
○ Support for USB capability for Node Image Management (NIM) tool.
● External storage enhancements:
○ NVMe/TCP protocol enhancements for scalability and ease of use.
○ VxRail-managed VMware vCenter Server with VxRail dynamic nodes and IP-based storage.
● Manageability

VxRail 8.0.xxx 11
 ○ VxRail password management UI is updated for improved password management.
○ For VxRail 8.0.210 and later versions, local plug-ins are transitioned to VMware vSphere Web Client remote plug-ins.
● Security: Support for an advanced VMware ESXi boot option to ensure that VMkernel only runs binaries that are packaged
and signed as part of a VIB.
The following features from VxRail 7.0.480 are supported in VxRail 8.0.210 also:
● Supports login to VxRail when VMware vCenter is configured to require RSA SecurID two-factor authentication.
● LCM enhancements:
○ Partial cluster updates using API
○ Perform an optional sequential node reboot cycle through UI or API.
○ Fast path to release planning or update advisor report for dark sites
○ Export compliance report in HTML format
○ Update advisor report has a 30-day history.
○ View firmware versions for nonmanaged components in the update advisor report and change list report.
○ More upgrade prechecks and autoremediations to improve upgrade success rates.
○ Refined upgrade algorithm for drifted clusters to allow upgrades to proceed for positive drifts.
○ Witness node firmware upgrade support through UI for VD-4000w (API firmware upgrade for VD-4000w that is
supported from VxRail 7.0.480 and later releases)
● Serviceability
○ Linux client for node image management tool
○ Incorporating more Day 2 procedures into VxRail Manager
● External Storage: Storage array reporting in VxRail Manager for Array type, Incompatible Disks, Storage Utilization
● Networking
○ IPv6 enhancements
○ RDMA for VMware vSAN with Broadcom NICs

Security fixes
VxRail 8.0.210 contains fixes that resolve multiple security vulnerabilities. For more information, see the following Dell Security
Advisory (DSA):
DSA-2024-050: Dell VxRail Security Update for multiple third-party component vulnerabilities which address:
● Dell PowerEdge updates for the following components:
○ Security update for TianoCore EDK2 Vulnerabilities. For more information, see DSA-2023-357.
○ Security Update for Dell AMD-based PowerEdge Server Vulnerabilities. For more information, see DSA-2023-391.
● VMware ESXi: VMSA-2024-0006: VMware ESXi, Workstation, and Fusion updates address multiple security vulnerabilities
(CVE-2024-22252, CVE-2024-22253, CVE-2024-22254, and CVE-2024-22255).
● VxRail Manager:
○ PostgreSQL: Security updates for POSTgreSQL vulnerabilities.
○ SUSE: Multiple Security fixes for SLES15 SP4.
STIG hardening on VxRail 8.0.020 or later versions is not supported. If STIG hardening is applied to a VxRail cluster, you cannot
upgrade to VxRail 8.0.020 and later versions.

Fixed issues in VxRail 8.0.210

The following table lists the issues that are fixed in VxRail 8.0.210:

Table 3. Fixed issues in VxRail 8.0.210

Issue Issue Description Introduced in Components
VXP-78322/ Some VxRail ESXi nodes in the cluster have physical MAC on virtual 7.0.450 Network
VXP-75240 NICs/vmks.
VXP-78278/ Upgrade from VxRail 7.0.410 to VxRail 8.0.110 failed. RKE is not 8.0.110 Infra
VXP-73516 starting after VxRail Manager upgrade as many images are not
loaded correctly during the upgrade.

12 VxRail 8.0.xxx
Table 3. Fixed issues in VxRail 8.0.210 (continued)
Issue Issue Description Introduced in Components
VXP-78054/ Node add fails at validation with error: "Failed to start the 7.0.411 Infra
VXP-74034 expansion job"
VXP-78006/ Pods are unresponsive when upgrading from VxRail 7.0.452 to 7.0.452 Infra
VXP-76455 VxRail 7.0.480.
VXP-77867/ VMware vCenter Server migration automation does not check 7.0.450 Network
VXP-76221 deduplication and compression.
VXP-77742/ Certificate verification failed due to verify_level calculation result 8.0.110 Day 2
VXP-76264 flapping between 2 and 0.
VXP-77483/ VxRail cluster upgrade from VxRail 7.0.452 to VxRail 7.0.480 failed 7.0.451 LCM
VXP-77194 with timeout.
VXP-77410/ Node expansion failed on 7.0.411. VxRail Manager cannot list NIC 7.0.411 Day 2
VXP-73065 Configuration.
VXP-77409/ Delete the old cached name following an ESXI Host Name Change. 7.0.452 Day 2
VXP-76375
VXP-77135/ UI error asking to update VMware 7.0.x licenses when the cluster is 8.0.110 LCM
VXP-73480 on 8.0.x.
VXP-77132/ Add Micron 5300 disk drive firmware update for D3DJ008 (KT63Y) VCF 4.5.1 on Hardware
VXP-75795 VxRail 7.0.450 SimShip
VXP-77129/ Platform service on the expanded node does not work properly 7.0.452 Day 2
VXP-76632 after IPv6 disabled.
VXP-77066/ VCF on VxRail LCM precheck failed due to manifest .xml file not VCF 4.5.1 on LCM
VXP-76018 found. VxRail 7.0.450
VXP-77064/ After upgrading to VxRail 7.0.480, NIC firmware E823 is missing on 7.0.482 LCM
VXP-76697 VD-4520C.
VXP-76464/ All clusters are reporting VXR308INTER0000 in VCF on VxRail . VCF 3.11 on Serviceability
VXP-76464 VxRail 4.7.541
VXP-76296/ VxRail 2 node clusters build failed configuring Static Routes. 8.0.020 and Day 1
VXP-71455 7.0.480
VXP-76288/ LCM failed to upload the upgrade bundle with the exception: Failed 7.0.480 LCM
VXP-76153 to connect to VMware vCenter Server while obtaining version
information.
VXP-76286/ Upgrade bundle upload failed at "Haven't found any record of VCF 4.5.2 on LCM
VXP-74872 vxrail_cluster_uuid from Global Configuration Service" VxRail 7.0.452
VXP-76285/ VxRail LCM upgrade to 7.0.450 (on VCF 4.5.1) failing with error VCF 4.5.1 - LCM
VXP-74250 "Failed to finalize composite upgrade." VxRail 7.0.450,
and 8.0.210
VXP-76284/ If the composite filename contains special characters, composite 8.0.020 LCM
VXP-73629 bundle upload fails.
VXP-76283/ Upgrade failed with error "A specified parameter was not correct: 8.0.101 LCM
VXP-72826 licenseKey. For more information about the exact cause of the
failure, see the server log.
VXP-75888/ Proactive health-check reports internal error VXR308INTER0000 7.0.450 Serviceability
VXP-75657 due to vCenter connection issue.
VXP-75632/ Add L3 node to initial segment "vxrail-initial-rack" failed with error 7.0.450 LCM
VXP-74392 "Network Proxy management IP error"

VxRail 8.0.xxx 13
Table 3. Fixed issues in VxRail 8.0.210 (continued)
Issue Issue Description Introduced in Components
VXP-75052/ VxRail Plugin not working after upgrading to VxRail 7.0.452 7.0.452 Day 2
VXP-75149/
VXP-74064
VXP-73283/ ADC 1.5.302 collect Hardware group data timed out. 7.0.372 Serviceability
VXP-68281
VXP-73209/ Upgrade stuck at firmware staging and pending for server reboot. 8.0.200 Platform
VXP-72327/ Service
VXP-72148
VXP-71308/ VxRail Platform Service on the host is not installed or ready - 8.0.200 LCM
VXP-71232 Occurring on every host in 20 host cluster during upgrade.
VXP-70948/ Registration fails with error: Enable request internal error. See KB 8.0.020, and Serviceability
VXP-70305 193409. 7.0.480

Known issues in VxRail 8.0.210

The following table provides known issues for VxRail 8.0.210:

Table 4. Known issues

Issue Summary Workaround
VXP-78023 VxRail 8.0.210 cluster still shows in the local plug-in VxRail dashboard See KB 000221849.
list.
VXP-77981 LCM fails when upgrading a customer-supplied witness VM when See KB 000221327.
there is another VM named "VMware vSAN Witness Appliance" under
the same VMware vCenter Server.
VXP-76713 iDRAC reports incorrect network interface model name on See KB 000221580.
PowerEdge XR4510c with Intel E823-C LOM NIC card
VXP-76182 Node expansion disk group creation times out in VxRail Manager See KB 000219193.
when encryption with disk wipes enabled.
VXP-76010 Unable to add a new node to one of the VI WLD. See KB 000191198.
VXP-78932 While the secondary cluster of the Workload domain is being created, See KB 000222740.
the primary cluster of the VxRail plug-in in VMware vCenter Server is
unreachable.

VxRail 8.0.120 Package Software

This section lists the components of the VxRail 8.0.120 software package.

VxRail Software
● VxRail Manager 8.0.120 build 28307007
● VxRail System 8.0.120 build 28307008
● VxRail Manager VMware vCenter Plugin 9.3.0.0

VMware integration
● VMware ESXi 8.0 Update 1c build 22088125
● VMware vCenter Server Appliance 8.0 Update 1d 22368047

14 VxRail 8.0.xxx
● VMware vSAN 8.0 Update 1c build 22088125

PowerEdge platform components

● BIOS: VE-660/VP-760: 1.5.6
● iDRAC: VE-660/VP-760: 7.00.30.00
● iSM: 5.2.0.0

What is new in VxRail 8.0.120

VxRail 8.0.120 is a manufacturing-only release that includes VMware vCenter Server 8.0 Update 1d (same as VxRail 8.0.111),
VMware ESXi 8.0 Update 1c (same as VxRail 8.0.110/8.0.111), and support for the following hardware:
● VxRail VP-760 (All NVMe)
● VxRail VE-660 (All NVMe)
For more information, see VMware vCenter Server 8.0 Update 1d Release Notes and VMware ESXi 8.0 Update 1c Release
Notes.

Security fixes
VxRail 8.0.120 contains fixes that resolve multiple security vulnerabilities, and additional VxRail fixes for issues from previous
releases. For more information, see the following Dell Security Advisory (DSA).
DSA-2023-147: Dell VxRail Security Update for Multiple third-party Component Vulnerabilities which address:
● VMware vCenter Server: VMSA-2023-0023: VMware vCenter Server updates an OOB Write Vulnerability
(CVE-2023-34048).
● SUSE: Multiple package updates for SLES are included. See the DSA for more details.
NOTE: STIG hardening on VxRail 8.0.020 or later versions is not supported. If STIG hardening is applied to a VxRail cluster,
you cannot upgrade to VxRail 8.0.020 or later versions.

Upgrade information
VxRail 8.0.120 is available only on a newly manufactured VxRail VP-760 NVMe platform and VxRail VE-660 NVMe platform.
You cannot upgrade to VxRail 8.0.120 from earlier VxRail versions. Upgrades from VxRail 8.0.120 to VxRail 8.0.x will be
supported in the upcoming VxRail 8.0.x releases.
NOTE: If VMware NSX is already running on the VxRail cluster and you are planning to change the VxRail LCM mode
to vLCM, see KB 000190928. After vLCM is enabled, VMware NSX Manager performs updates independently of a VxRail
cluster update.

VxRail 8.0.201 Package Software

This section lists the components of the VxRail 8.0.201 software package.

VxRail Software
● VxRail Manager 8.0.201 build 28354420
● VxRail System 8.0.201 build 28354422
● VxRail Manager VMware vCenter Plugin 9.3.0.0

VxRail 8.0.xxx 15
VMware integration
● VMware ESXi 8.0 Update 2 build 22380479
● VMware vCenter Server Appliance 8.0 Update 2a build 22617221
● VMware vSAN 8.0 Update 2 build 22380479

PowerEdge platform components

● BIOS:
○ G560/F: 2.19.1
○ E560/F/N, P570/F, V570/F, S570: 2.19.1
○ P580N: 2.19.1
○ D560/F: 2.19.1
○ V670F, P670F/N, E660/F/N, S670: 1.12.1
○ E665/F/N, P675F/N: 2.12.4
● iDRAC:
○ G560/F: 7.00.00.00
○ E560/F/N, P570/F, V570/F, S570: 7.00.00.00
○ P580N: 7.00.00.00
○ D560/F: 7.00.00.00
○ V670F, P670F/N, E660/F/N, S670: 7.00.30.00
○ E665/F/N, P675F/N: 7.00.30.00
● iSM: 5.2.0.0.3156

What is new in VxRail 8.0.201

VxRail 8.0.201 includes the VMware vCenter Server 8.0 Update 2a (same as VxRail 8.0.200), VMware ESXi 8.0 Update 2 (same
as VxRail 8.0.200), updated BIOS for hardware models V670F, P670F/N, E660/F/N, S670, and other security fixes.
For more information, see VMware vCenter Server 8.0 Update 2a Release Notes and VMware ESXi 8.0 Update 2 Release Notes.

Security fixes
VxRail 8.0.201 contains fixes that resolve multiple security vulnerabilities. For more information, see the following Dell Security
Advisory (DSA):
DSA-2023-465: Dell VxRail Security Update for multiple third-party component vulnerabilities which address:
● PowerEdge: Intel November 2023 Security Advisory (2023.4 IPU) (CVE-2023-23583)
● VxRail Manager: SUSE

VxRail 8.0.111 Package Software

This section lists the components of the VxRail 8.0.111 software package.

VxRail Software
● VxRail Manager 8.0.111 build 28310881
● VxRail System 8.0.111 build 28310882
● VxRail Manager VMware vCenter Plugin 9.3.0.0

16 VxRail 8.0.xxx
VMware integration
● VMware ESXi 8.0 Update 1c build 22088125
● VMware vCenter Server Appliance 8.0 Update 1d 22368047
● VMware vSAN 8.0 Update 1c build 22088125

PowerEdge platform components

● BIOS:
○ G560/F: 2.19.1
○ E560/F/N, P570/F, V570/F, S570: 2.19.1
○ P580N: 2.19.1
○ D560/F: 2.19.1
○ V670F, P670F/N, E660/F/N, S670: 1.11.2
○ E665/F/N, P675F/N: 2.11.4
● iDRAC:
○ G560/F: 6.10.80.00
○ E560/F/N, P570/F, V570/F, S570: 6.10.80.00
○ P580N: 6.10.80.00
○ D560/F: 6.10.80.00
○ V670F, P670F/N, E660/F/N, S670: 6.10.80.00
○ E665/F/N, P675F/N: 6.10.80.00
● iSM: 5.1.1.0.3080

What is new in VxRail 8.0.111

VxRail 8.0.111 includes the new VMware vCenter Server 8.0 Update 1d, VMware ESXi 8.0 Update 1c (same as VxRail 8.0.110),
security fixes, new BIOS firmware, and additional fixes for issues from previous releases.
For more information, see VMware vCenter Server 8.0 Update 1d Release Notes and VMware ESXi 8.0 Update 1c Release
Notes.

Security fixes
VxRail 8.0.111 contains fixes that resolve multiple security vulnerabilities and additional VxRail fixes for issues from previous
releases. For more information, see the following Dell Security Advisory (DSA).
DSA-2023-407: Dell VxRail Security Update for multiple third-party component vulnerabilities which address:
● VMware vCenter Server: VMSA-2023-0023: VMware vCenter Server updates an OOB Write Vulnerability
(CVE-2023-34048).
● VxRail Manager: Spring Framework update to remediate a potential security bypass vulnerability (CVE-2023-20860).
● SUSE: Multiple package updates for SLES have been incorporated. See the DSA for more details.
NOTE: STIG hardening on VxRail 8.0.020 or later versions is not supported. If STIG hardening is applied to a VxRail cluster,
you cannot upgrade to VxRail 8.0.020 or later versions.

Fixed issues in VxRail 8.0.111

The following table lists the issues that are fixed in VxRail 8.0.111:

Table 5. Fixed issues in VxRail 8.0.111

Issue Issue Description Release found Category
VXP-74082 VxRail Manager plug-in is slow after upgrading to VxRail 7.0.45x. 7.0.450 UI/IX
/

VxRail 8.0.xxx 17
Table 5. Fixed issues in VxRail 8.0.111 (continued)
Issue Issue Description Release found Category
VXP-72863
/
VXP-73633
VXP-74309 Error encountered in vLCM service request exchange during the LCM for 8.0.110 LCM
/VXP-75031 VxRail 7.0.400 through 8.0.11x.
VXP-73879 LCM upgrade from VxRail 7.0.010, 7.0.100, 7.0.101 to VxRail 7.0.480 failed. 7.0.010 Infra
/VXP-71512

VxRail 8.0.200 Package Software

This section lists the components of the VxRail 8.0.200 software package.

VxRail Software
● VxRail Manager 8.0.200 build 28314728
● VxRail System 8.0.200 build 28314729
● VxRail Manager VMware vCenter Plugin 9.3.0.0

VMware integration
● VMware ESXi 8.0 Update 2 build 22380479
● VMware vCenter Server Appliance 8.0 Update 2a build 22617221
● VMware vSAN 8.0 Update 2 build 22380479

PowerEdge platform components

● BIOS:
○ G560/F: 2.19.1
○ E560/F/N, P570/F, V570/F, S570: 2.19.1
○ P580N: 2.19.1
○ D560/F: 2.19.1
○ V670F, P670F/N, E660/F/N, S670: 1.11.2
○ E665/F/N, P675F/N: 2.12.4
● iDRAC:
○ G560/F: 7.00.00.00
○ E560/F/N, P570/F, V570/F, S570: 7.00.00.00
○ P580N: 7.00.00.00
○ D560/F: 7.00.00.00
○ V670F, P670F/N, E660/F/N, S670: 7.00.30.00
○ E665/F/N, P675F/N: 7.00.30.00
● iSM: 5.2.0.0.3156

What is new in VxRail 8.0.200

VxRail 8.0.200 includes the VMware vCenter Server 8.0 Update 2a, VMware ESXi 8.0 Update 2, updated Samsung PM1735a/
1733a drive firmware, security fixes, and additional VxRail fixes for issues from previous releases.
For more information, see VMware vCenter Server 8.0 Update 2a Release Notes and VMware ESXi 8.0 Update 2 Release Notes.

18 VxRail 8.0.xxx
New features
The following new features are added:
● RSA SecurID two-factor authentication is required for Support to log in to VxRail after the VMware vCenter Server is
configured.
● VMware vLCM enablement through VxRail API
● Automation for Day1 HCI Mesh for VxRail dynamic node clusters

Security fixes
VxRail 8.0.200 contains fixes that resolve multiple security vulnerabilities. For more information, see the following Dell Security
Advisory (DSA).
DSA-2023-408: Dell VxRail Security Update for multiple third-party component vulnerabilities which address:
● VMware vCenter Server: VMSA-2023-0023: VMware vCenter Server updates an Out-of-Bounds Write Vulnerability
(CVE-2023-34048).
● VMware Tools: VMSA-2023-0019: VMware Tools updates address a SAML Token Signature Bypass Vulnerability
(CVE-2023-20900).
● PowerEdge: DSA-2023-206: Security update for the PowerEdge server for Intel August 2023 Secure Advisories (2023.2
IPU).
● VxRail Manager: SUSE
● STIG: STIG hardening on VxRail 8.0.020 or later versions is not supported. If STIG hardening is applied to a VxRail cluster,
you cannot upgrade to VxRail 8.0.020 and later versions.

Known issues in VxRail 8.0.200

The following table provides known issues for VxRail 8.0.200:

Table 6. Known issues

Issue Summary Workaround
VXP-74326 When VxRail cluster with satellite node running between VxRail See KB 000219121.
versions 7.0.300-7.0.401 is upgraded to VxRail 8.0.200, the upgrade
of the satellite node fails.
VXP-75045 Inaccurate Target Version displayed in the VxRail Update Advisor See KB 000219119.
report for customer-managed VMware vCenter Server configurations
since VxRail 8.0.100.

Fixed issues in VxRail 8.0.200

The following table lists the issues that are fixed in VxRail 8.0.200:

Table 7. Fixed issues in VxRail 8.0.200

Issue Issue Description Release found Category
VXP-73765/ UI wording enhancement to create a new VxRail management account when 8.0.110 UI/UX
VXP-73478 upgrading to VxRail 8.x.
VXP-72578/ VxRail upgrade gets stuck on the credentials page before starting the 8.0.020 LCM
VXP-72704/ upgrade.
VXP-74388

VxRail 8.0.xxx 19
VxRail 8.0.110 Package Software
This section lists the components of the VxRail 8.0.110 software package.

VxRail Software
● VxRail Manager 8.0.110 build 28169412
● VxRail System 8.0.110 build 28169413
● VxRail Manager VMware vCenter Plugin 9.3.0.0

VMware integration
● VMware ESXi 8.0U1c build 22088125
● VMware vCenter Server Appliance 8.0 Update 1c build 22088981
● VMware vSAN 8.0U1c build 22088125

PowerEdge platform components

● BIOS:
○ G560/F: 2.18.1
○ E560/F/N, P570/F, V570/F, S570: 2.18.1
○ P580N: 2.18.1
○ D560/F: 2.18.1
○ V670F, P670F/N, E660/F/N, S670: 1.10.2
○ E665/F/N, P675F/N: 2.11.4
● iDRAC:
○ G560/F: 6.10.80.00
○ E560/F/N, P570/F, V570/F, S570: 6.10.80.00
○ P580N: 6.10.80.00
○ D560/F: 6.10.80.00
○ V670F, P670F/N, E660/F/N, S670: 6.10.80.00
○ E665/F/N, P675F/N: 6.10.80.00
● iSM: 5.1.1.0.3080

What is new in VxRail 8.0.110

VxRail 8.0.110 includes the new VMware vCenter Server 8.0 Update 1c and VMware ESXi 8.0 Update 1c, and security fixes.
For more information, see VMware vCenter Server 8.0 Update 1c Release Notes and VMware ESXi 8.0 Update 1c Release
Notes.

Security fixes
VxRail 8.0.110 contains fixes that resolve multiple security vulnerabilities. For more information, see the following Dell Security
Advisory (DSA).
DSA-2023-276: Dell VxRail Security Update for Multiple third-party Component Vulnerabilities which address:
● VMware: VMware has remediated several security issues and defects in this release. See the following release notes for
more information:
○ ESXi 8.0 U1c Release Notes
○ vCenter 8.0 U1c Release Notes
● SUSE: Multiple package updates for SLES have been incorporated. See the DSA for more details.

20 VxRail 8.0.xxx
● STIG: STIG hardening on VxRail 8.0.020 or later versions are not supported. If STIG hardening is applied to a VxRail cluster,
you cannot upgrade to VxRail 8.0.020 and later versions.

Key Differences
The key differences for the VxRail 8.0.110 release are the same as VxRail 8.0.100 Key Differences.

Upgrades
Upgrading VxRail clusters with GPUs is supported with VxRail 8.0.110 and later.
All VxRail 8.0.x customers running VMware vSAN 8.0 ESA are strongly recommended to upgrade to VxRail 8.0.110 (with
VMware vSphere 8.0 U1c/P02) and apply the workaround steps as described in KB 93657.
Do not upgrade to VxRail 8.0.110 if your system contains a node with both a Mellanox CX-5 and a Broadcom 57414 NIC card. For
more information, see VXP-72148. A validated upgrade path will be communicated when available.

Known issues in VxRail 8.0.110

The following table provides known issues for VxRail 8.0.110:

Table 8. Known issues in VxRail 8.0.110

Issue Summary Workaround
VXP-72148 LCM upgrade fails when upgrading nodes with both See KB 216607.
Mellanox CX-5 and Broadcom 57414.

VxRail 8.0.101 Package Software

This section lists the components of the VxRail 8.0.101 software package.

VxRail Software
● VxRail Manager 8.0.101 build 28122295
● VxRail System 8.0.101 build 28122296
● VxRail Manager VMware vCenter Plugin 9.3.0.0

VMware integration
● VMware ESXi 8.0U1a build 21813344
● VMware vCenter Server Appliance 8.0 Update 1b build 21860503
● VMware vSAN 8.0U1a build 21813344

PowerEdge platform components

● BIOS:
○ G560/F: 2.18.1
○ E560/F/N, P570/F, V570/F, S570: 2.18.1
○ P580N: 2.18.1
○ D560/F: 2.18.1
○ V670F, P670F/N, E660/F/N, S670: 1.10.2
○ E665/F/N, P675F/N: 2.11.4
● iDRAC:

VxRail 8.0.xxx 21
 ○ G560/F: 6.10.80.00
○ E560/F/N, P570/F, V570/F, S570: 6.10.80.00
○ P580N: 6.10.80.00
○ D560/F: 6.10.80.00
○ V670F, P670F/N, E660/F/N, S670: 6.10.80.00
○ E665/F/N, P675F/N: 6.10.80.00
● iSM: 5.1.1.0.3080

What is new in VxRail 8.0.101

VxRail 8.0.101 includes the VMware vCenter Server 8.0 Update 1b and VMware ESXi 8.0 Update 1a (same as VxRail 8.0.100),
security fixes and additional fixes for issues from previous releases.
For more information, see VMware vCenter Server Server 8.0 Update 1b Release Notes and VMware ESXi 8.0 Update 1a
Release Notes.

Security fixes
VxRail 8.0.101 contains fixes that resolve multiple security vulnerabilities. For more information, see the following Dell Security
Advisory (DSA).
DSA-2023-243: Dell VxRail Security Update for Multiple third-party Component Vulnerabilities which address:
● VMware ESXi: An out-of-bounds read vulnerability in the TPM 2.0 Module Library (CVE-2023-1017, and CVE-2023-1018).
● VMware vCenter Server: VMSA-2023-0014: Multiple memory corruption vulnerabilities in DCERPC protocol implementation.
○ Heap overflow vulnerability (CVE-2023-20892).
○ Use-after-free vulnerability (CVE-2023-20893).
○ Out-of-bounds read vulnerabilities (CVE-2023-20894, and CVE-2023-20896).
○ Memory corruption vulnerability (CVE-2023-20895).
● STIG: STIG hardening on VxRail 8.0.020 or later versions are not supported. If STIG hardening is applied to a VxRail cluster,
you cannot upgrade to VxRail 8.0.020 and later versions.

Key Differences
The key differences for the VxRail 8.0.101 release are the same as listed in the VxRail 8.0.100 Key Differences.

Upgrades
Do not upgrade to VxRail 8.0.101 if your system contains a node with both a Mellanox CX-5 and a Broadcom 57414 NIC card.
See VXP-72148.

Fixed issues in VxRail 8.0.101

The following table lists the issues that are fixed in VxRail 8.0.101:

Table 9. Fixed issues in VxRail 8.0.101

Issue Issue Description Release found Category
VXP-70240 Upgrade from 4.5.x/4.7.x to 7.0.450/7.0.451 or 8.0.100 fails at VxRail Manager 7.0.450 LCM
/ migration step with "Error in migration, removed new VxRail Manager: lockbox
VXP-70315 execute_remote_lockbox_script error in migration."
/
VXP-71027

22 VxRail 8.0.xxx
Known issues in VxRail 8.0.101
The following table provides known issues for VxRail 8.0.101:

Table 10. Known issues in VxRail 8.0.101

Issue Summary Workaround
VXP-72148 LCM upgrade fails when upgrading nodes with both See KB 216607.
Mellanox CX-5 and Broadcom 57414.

VxRail 8.0.100 package software

This section lists the components of the VxRail 8.0.100 software package.

VxRail Software
● VxRail Manager 8.0.100 build 28093094
● VxRail System 8.0.100 build 28093095
● VxRail Manager vCenter Plugin 9.3.0.0

VMware integration
● VMware ESXi 8.0U1a build 21813344
● VMware vCenter Server Virtual Appliance 8.0U1a build 21815093
● VMware vSAN 8.0U1a build 21813344

PowerEdge platform components

● BIOS:
○ G560/F: 2.18.1
○ E560/F/N, P570/F, V570/F, S570：2.18.1
○ P580N: 2.18.1
○ D560/F: 2.18.1
○ V670F, P670F/N, E660/F/N, S670: 1.10.2
○ E665/F/N, P675F/N: 2.11.4
● iDRAC:
○ G560/F：6.10.80.00
○ E560/F/N, P570/F, V570/F, S570：6.10.80.00
○ P580N: 6.10.80.00
○ D560/F: 6.10.80.00
○ V670F, P670F/N, E660/F/N, S670: 6.10.80.00
○ E665/F/N, P675F/N: 6.10.80.00
● iSM: 5.1.1.0.3080

What is new in VxRail 8.0.100

VxRail 8.0.100 includes VMware ESXi 8.0 Update 1a and VMware vCenter Server 8.0 Update 1a, VxRail features, enhancements,
fixes, and rollups from previous releases.
For VMware vSphere specific information, see VMware ESXi 8.0 Update 1a Release Notes and VMware vCenter Server 8.0
Update 1a Release Notes.

VxRail 8.0.xxx 23
New features
● Hyperconverged Infrastructure Mesh:
○ Added support for cross-VxRail-managed VMware vCenter Server remote data stores.
○ Added support for VMware vSAN OSA (stretch clusters).
○ Added support for VMware vSAN ESA (nonstretched clusters only).
● Added TPM to the host physical view page, enabling customers to check the TPM status and version from the UI.
● Added support for getting the TPM status and version from the API.
● Dynamic AppsON with VxRail and PowerStore:
○ Run PowerStore LCM from VxRail Manager.
○ Report the code version of PowerStore.
● VxRail dynamic nodes support the PowerMax 2500 and 8500 storage arrays.
● LCM enhancements:
○ Enhanced the frequency of LCM precheck updates in VxRail.
○ Improved and streamlined upgrade planning and precheck remediation.
○ Added support for smart bundle download.
○ Added information to compliance reports.
● Tighter integration of GPUs for LCM and operations
○ Upgrade the NVIDIA VIBs using the UI and API during cluster updates.
○ The VxRail Manager physical view page displays the NVIDIA GPU.
● VxRail-managed VMware vCenter Server manages satellite nodes for edge or remote sites.
● Added LACP two-port and management traffic support with VxRail-managed VMware VDS for networking.
● Serviceability:
○ Automated preupgrade backups to reduce service and resolution time.
○ Added support for new iDRAC events.
○ Added support for dial-home NIC101 or NIC up event.

Security fixes
VxRail 8.0.100 contains fixes that resolve multiple security vulnerabilities. For more information, see the following Dell Security
Advisory (DSA):
DSA-2023-200: Dell VxRail Security Update for Multiple third-party Component Vulnerabilities which address:
● VMware ESXI:
○ The Module Library in TPM 2.0 contains an out-of-bounds write vulnerability.
○ MIT Kerberos 5 enables unbounded recursion through an ASN.1 encoded Kerberos message.
● PowerEdge security updates include:
○ Out-of-bounds write vulnerability for BIOS.
○ Multiple OpenSSL vulnerabilities.
○ Tianocore EDK2 vulnerability.
○ Intel May 2023 Security Advisories (2023.2 IPU).
● VxRail Manager:
○ Cilium: Escalated privileges to cluster administrator.
○ SUSE: Multiple package updates in SLES. See the DSA.
● STIG: STIG hardening on VxRail 8.0.020 or later is not supported. If STIG hardening is applied to a VxRail cluster, you cannot
upgrade to VxRail 8.0.020 and later versions.

Key Differences
● VxRail 8.0.xxx does not provide VMware vRealize Log Insight (VMware Aria Operations for Logs) licenses or software. If you
use or plan to use VMware vRealize Log Insight, see KB 212617 before upgrading or installing VxRail 8.0.xxx.
● VxRail 8.0.100 does not support the Quanta hardware platform and VxRail E460/F, P470/F, S470, V470.
● VMware discontinued support for TPM 1.2 in VMware vSphere 8.0. The upgrade behavior to VxRail 8.0.100 for hosts with
TPM 1.2 modules is different from past releases. VxRail Manager prevents upgrades to VxRail 8.0.000 and 8.0.020 if TPM
1.2 modules are present and enabled. While upgrading to VxRail 8.0.100, the VxRail Manager allows upgrades to proceed with
a warning if TPM 1.2 modules are present and enabled. The TPM Security setting is turned Off in the BIOS as part of the

24 VxRail 8.0.xxx
 VxRail 8.0.100 upgrade because TPM 1.2 modules are not supported by VMware ESXi 8.0 and do not function, even when
turned on in the BIOS. If you require TPM functionality and want to upgrade to a TPM 2.0 module or manually disable the
TPM 1.2 module, see KB 204703.
● Do not upgrade to VxRail 8.0.x if RecoverPoint for VM is configured. RecoverPoint for VM version 6.0 will be available soon
but will support new deployments only.
● VMware vSphere 8.0 does not support CloudLink 8.0. If you are using VMware vSAN Data Store Encryption with CloudLink,
do not upgrade to VxRail 8.0.100 until support for CloudLink 8.0 is available.
● If you are running SmartFabric (SFS) with VxRail, do not upgrade to VxRail 8.0.100.
● Before you upgrade to VxRail 8.0.x, review the following details for your connectivity configuration:
○ Upgrade to a secure connect gateway if connected to an external Secure Remote Services gateway.
○ The minimum gateway version is 5.00.07.10, and for gateways that are deployed as VM on ESXi 8.0.x, the minimum
version is 5.16.000.14. If you are already connected to a secure connect gateway, ensure that the minimum gateway
version meets these requirements, or upgrade the gateway accordingly.
○ See KB 196945 and Secure Remote Services 3.52 Upgrade to Secure Connect Gateway for more information.
● Before you upgrade to VxRail 8.x, SFS with VxRail installations that were deployed with VxRail 4.7.xxx or 7.0.000 through
7.0.3xx require decoupling. SFS with VxRail installations that were deployed with VxRail 7.0.400 through 7.0.411 require
decoupling only if Automated VxRail Switch Configuration was set to Enabled during deployment. If set to Disabled
during deployment, decoupling is not required. See New Deployment Option for SmartFabric Services with VxRail for
information about this setting. For VxRail 7.0.x, decoupling procedures are available on SolVe Online for VxRail under VxRail
Procedures > Miscellaneous > 'How To' Procedures > Change other VxRail cluster settings.
● To enhance security, VxRail Manager does not accept insecure SHA1 certificates. See KB 213499 for more information.
● VxRail 8.0.100 does not support the following VxRail models:
○ VD-4510c
○ VD-4520c
○ VD-4000r
○ VD-4000z
○ VD-4000w
● Upgrades beyond 8.0.100 triggers VxRail LCM to automatically retrieve the latest precheck file from Automatic Catalog
Generator (ACG) for internet-connected upgrades. VxRail runs the latest available LCM precheck and eliminates the need to
perform VxVerify before updates. You can manually download and upload the VxRail precheck file for unconnected clusters.
For more information, see KB 19890.
● Internet updates show real-time upgrade readiness for the recommended update. The latest VxRail prechecks are
downloaded and run daily to determine the clusters update readiness. The new Update Advisor Report contains all update
insights, including VxRail LCM precheck results. For more information, see KB 213039.
● The Update Advisor Report s comprehensive and exportable and enhances update planning and increases success rates by
providing the following features:
○ Cluster update readiness status
○ Direct link to release notes.
○ Recommendations for resolving issues before updating
○ Analysis of component-level drift
○ Custom component information
● Smart bundle capabilities reduce VxRail bundle download size by up to sixty percent for Internet-connected, customer-
managed VMware vCenter Server.
● Non-VxRail managed components (GPUs, FC HBAs, and VMware NSX Installation Bundles) can be updated with a single
maintenance cycle or reboot during the LCM update workflow.
● The compliance view applies standardized column labels and displays version mismatch to indicate drift from Continuously
Validated State (CVS). VMware ESXi also displays the VMware ESXi build number along with its version.
● VxRail LCM prechecks ensure that the witness nodes have enough space and warn about high VMware vSAN utilization
impact on cluster update times.
● iDRAC restart is introduced at the beginning of LCM execution to improve update success rates.

Upgrades
● Do not upgrade to VxRail 8.0.100 if your system contains a node with both a Mellanox CX-5 and a Broadcom 57414 NIC card.
See VXP-72148.
● To run a cluster on VMware vSphere 8.0, you need VMware vSphere 8.0 license keys:
○ The life cycle management precheck does not stop you from upgrading without VMware vSphere 8.0 license keys.
○ The nodes operate on sixty-day evaluation license keys in the absence of VMware vSphere 8.0 license keys. See VMware
Customer Connect to obtain the necessary license keys and determine if your clusters require them.

VxRail 8.0.xxx 25
● Due to the delay in GPU driver availability, do not upgrade VxRail clusters with GPUs to VxRail 8.0.100.
● Verify that the multicast filtering mode is set to Basic before initiating VxRail LCM to a later version of 7.0.x or 8.0.x from
version 4.x or 7.0.x. During the upgrade, VMware VDS may reset the multicast filtering mode to the default IGMP or MLD
snooping. For more information, see KB 196307.
● After upgrading from VxRail 8.0.x to VxRail 8.0.100, PowerPath does not recognize or detect NVMe devices. See KB 214327
for more information.

Fixed issues in VxRail 8.0.100

The following table lists the issues that are fixed in VxRail 8.0.100:

Table 11. Fixed issues in VxRail 8.0.100

Issue Issue description Release Category
found
VXP-69381/ Multiple cluster upgrades in parallel failed due to conflicts of the new VxRail 7.0.400 LCM
VXP-67724 Manager IP address.
VXP-69142/ Node unresponsive during upgrade from VxRail 7.0.x to 8.0.x due to Citrix 8.0.000 Core Service
VXP-68800 VDI VMs having flat.vmdk files on the vSAN datastore.

VXP-68870/ The secure connect gateway connectivity issue post upgrade - the secure 7.0.372 Day2
VXP-67755 connect gateway keeps restarting.
VXP-68380/ Deployment on VxRail 7.0.410 Resouce not found VMware vCenter 7.0.410 Day1
VXP-67207 Server Appliance.

VXP-68379/ Disable of secure connect gateway failed with Failure happened in 7.0.400 Serviceability
VXP-67255 disable remote connector error message.

VXP-68378/ Radar vxtii_check failure. 7.0.410 Serviceability

VXP-67889
VXP-68341/ Upgrade to VxRail 7.0.410 stuck at the loading screen and vmware- 7.0.410 LCM
VXP-68030 marvin service fails to run with an exit code result.

VXP-68337/ Failed to validate temp IP address during a major upgrade with L3 network 8.0.020 LCM
VXP-68230 topology.
VXP-67972 Manifest xml loading failed during the LCM process 7.0.370 LCM
VXP-67196
VXP-67970/ Cluster migration failed in wrap-up stage with error Cannot 7.0.372 Network
VXP-67524 authenticate with provided SourceVCAdminAccount.

VXP-67969/ Node expansion failed at validation error The given hosts have 7.0.400 Storage
VXP-67632 different types of disk groups and host with hybrid disk types
is not compatible with existing all-flash or all-NVMe cluster.
VXP-67963/ VxRail Manager plug-in not showing cluster information about system page 7.0.411 LCM
VXP-67651 due to certificates (cache).
VXP-67719/ VXR500PSU0003 event handling results in unexpected call-homes G560F 7.0.401 Serviceability
VXP-65299 and P570F.
VXP-67718/ Failed disk drive event notification not sent. 7.0.320 Infra
VXP-66792
VXP-67716/ Upgrade failed due to system.operation_status table extension filed has 7.0.400 LCM
VXP-67463 none-json format string.
VXP-67715/ VxRail 7.0.350 node expansion failed on the NIC Configuration step, 7.0.350 Day2
VXP-67635 cluster-hosts return error: 500.
VXP-67442/ LCM failed at VMware vCenter Server upgrade step: Failed to perform task 8.0.020 LCM
VXP-67130 PscEnableSSHTask.

26 VxRail 8.0.xxx
Table 11. Fixed issues in VxRail 8.0.100 (continued)
Issue Issue description Release Category
found
VXP-67360/ Parallel cluster upgrades failed due to different cluster VxRail Manager VMs 4.7.536 LCM
VXP-67133 under the same VM folder.
VXP-67359/ Enhance vxt-gennodeconfig script to contain disk_group_type information 7.0.210 Platform
VXP-67228 in vxnode.config. Service
VXP-66945/ VxRail 7.0.410 LCM issue upgrading SKHynix SSD Firmware. 7.0.410 Platform
VXP-64560 Service
VXP-66916/ LCM precheck stuck at VxRail Manager System precheck has timed 7.0.401 LCM
VXP-64367 out on VxRail Manager.

VXP-66915/ Disable M2M not working during 7.0.371 to 7.0.400 LCM. 7.0.400 Day2
VXP-65490
VXP-66712/ Node expansion failed at host_ips_validation. 7.0.371 Day2
VXP-66595
VXP-66561/ Unable to extract host profiles of any host after upgrading to 7.0.410. 7.0.410 Day2
VXP-65554
VXP-66560/ 2-Node Deployment Error: Unable to verify the network 7.0.410 Day1
VXP-66466 connection between witness node and data node. The
witness traffic connectivity among hosts appears down.

VXP-66502/ Cannot add multiple nodes at a time. 7.0.320 Network

VXP-65176
VXP-66501/ P670F has two default VMware vSAN disk group types in 7.0.410 which 7.0.410 Storage
VXP-66246 causes node discovery issue.
VXP-66299/ VXR034020 event sent before the retry of the connectivity status check. 7.0.410 Serviceability
VXP-65954
VXP-65852/ Ambiguous or misleading error message when failed to log in to VxRail 7.0.401 Day2
VXP-65297 Manager support account.
VXP-65844/ vLCM - Upgrade fails on every node. 7.0.401 LCM
VXP-63774
VXP-65736/ VxRail 4.7.560 LCM to VxRail 7.0.410 failed due to precheck missing 7.0.410 LCM
VXP-65444 psc_root_user in the request spec.
VXP-65659/ Time wasted calling ptagent when PTAgent does not exist on nodes. 7.0.400 Day2
VXP-65657/
VXP-64910
VXP-65569/ LCM fails because multiple vNICs exist on the VxRail-managed VMware 7.0.401 LCM
VXP-65568 vCenter Server.
VXP-65563/ rcs-service direct connectivity test fails if proxy settings have null. 7.0.410 Serviceability
VXP-65430/
VXP-65135
VXP-65558/ System data migration failure when upgrading VxRail Manager. 7.0.410 LCM
VXP-65450
VXP-65548/ The dc.log file does not contain all steps when collecting the VxRail 7.0.400 Day2
VXP-64964/ Manager log bundle for the first time.
VXP-65045
VXP-65009/ Update success dial home MYSTIC10C112 with upgrade source version. 7.0.410 Serviceability
VXP-64678

VxRail 8.0.xxx 27
Known issues in VxRail 8.0.100
The following table provides known issues for VxRail 8.0.100:

Table 12. Known issues in VxRail 8.0.100

Issue Summary Workaround
VXP-72148 LCM upgrade fails when upgrading nodes with both See KB 216607.
Mellanox CX-5 and Broadcom 57414.
VXP-67692 No protocol type for VxRail dynamic node with There is no workaround for this issue.
nvmeoFC vVol API.
VXP-70240/ Upgrade from 4.5.x/4.7.x to 7.0.450/7.0.451 or See KB 214346.
VXP-70315/ 8.0.100 fails at VxRail Manager migration step with
VXP-71027 "Error in migration, removed new vxm: lockbox
execute_remote_lockbox_script error in migration."

VxRail 8.0.020 package software

This section lists the components of the VxRail 8.0.020 software package.

VxRail Software
● VxRail Manager 8.0.020 build 27949999
● VxRail System 8.0.020 build 27950000
● VxRail Manager vCenter Plugin 9.2.1.0

VMware integration
● VMware ESXi 8.0b build 21203435
● VMware vCenter Server Virtual Appliance 8.0b build 21216066
● VMware vSAN 8.0b build 21203435

PowerEdge platform components

● BIOS:
○ G560/F: 2.17.1
○ E560/F/N, P570/F, V570/F, S570：2.17.1
○ P580N: 2.17.1
○ D560/F: 2.17.1
○ V670F, P670F/N, E660/F/N, S670: 1.9.2
○ E665/F/N, P675F/N: 2.10.2
● iDRAC:
○ G560/F：6.10.30.00
○ E560/F/N, P570/F, V570/F, S570：6.10.30.00
○ P580N: 6.10.30.00
○ D560/F: 6.00.30.00
○ V670F, P670F/N, E660/F/N, S670: 6.10.30.00
○ E665/F/N, P675F/N: 6.10.30.00
● iSM: 4.3.1.0.19

28 VxRail 8.0.xxx
What is new in VxRail 8.0.020
VxRail 8.0.020 includes VMware ESXi 8.0b, VMware vCenter Server 8.0b, security fixes, VxRail fixes for issues from previous
releases.
For information about the VMware ESXi 8.0b release and VMware vCenter Server 8.0b release, see VMware ESXi 8.0b Release
Notes and VMware vCenter Server 8.0b Release Notes.

New features
VxRail 8.0.020 includes the following new features from VxRail 7.0.410:
● Serviceability enhancements
● Life Cycle Management (LCM) enhancements:
○ Increased insights to the customer during maintenance mode entry.
○ Enhanced LCM precheck.
● Miscellaneous:
○ You can expand an existing 2-socket VxRail P670F cluster with 1-socket VxRail P670F nodes and vice versa.
○ Added local support for VxRail-managed VMware vCenter Server Appliance on 2-node cluster configurations.
○ Added VMware vSAN RDMA support for Mellanox CX-6 100 GbE DX Dual Port NIC cards for 4.21.71.101 (asynchronous
driver) and 22.32.20.04 (FW).

Security fixes
VxRail software 8.0.020 contains fixes that resolve multiple security vulnerabilities. For more information, see the following Dell
Security Advisory (DSA):
DSA-2023-065: Dell VxRail Security Update for multiple third-party component vulnerabilities which address:
● VMware vCenter Server: VMSA-2021-0025.6. See VMware vCenter Server IWA privilege escalation vulnerability
(CVE-2021-22048).
● VMware ESXi: VMSA-2022-033. See VMware ESXi heap out-of-bounds write vulnerability in the USB 2.0 controller (EHCI),
(CVE-2022-31705).
● Dell PowerEdge: Server Security Update for Intel February 2023 Security Advisories (2023.1 IPU)
○ INTEL-SA-00700: Insufficient granularity of access control in OOB in some Intel Atom and Intel Xeon Scalable Processors
may allow a privileged user to enable escalation of privilege using adjacent network access.
○ INTEL-SA-00717: Improper access control in the BIOS firmware for some Intel Processors may allow a privileged user to
enable escalation of privilege using local access.
○ INTEL-SA-00718: Active debug code in some Intel SPS firmware before version SPS_E5_04.04.04.300.0 may allow an
authenticated user to enable escalation of privilege using local access.
○ INTEL-SA-00730: Incorrect calculation in the microcode keying mechanism for some Third-Generation Intel Xeon
Scalable Processors may allow a privileged user to enable information disclosure using local access.
○ INTEL-SA-00738: Incorrect default permissions in some memory controller configurations for some Intel Xeon Processors
when using Intel Software Guard Extensions which may allow a privileged user to potentially enable escalation of privilege
using local access.
○ INTEL-SA-00767: Improper isolation of shared resources in some Intel Processors when using Intel Software Guard
Extensions may allow a privileged user to enable information disclosure using local access.
● VxRail Manager: SUSE—Multiple package updates in SLES. For more information, see the DSA.
● STIG: STIG hardening on VxRail 8.0.020 or later is not supported. If STIG hardening is applied to a VxRail cluster, you cannot
upgrade to VxRail 8.0.020 and later versions.

Key Differences
● VxRail 8.0.x no longer provides VMware vRealize Log Insight (VMware Aria Operations for Logs) license or software. See
KB 212617 for details before upgrading or installing VxRail 8.0.x and if you are using or intend to use VMware vRealize Log
Insight.
● VxRail 8.0.020 does not support the Quanta hardware platform and VxRail E460/F, P470/F, S470, V470.

VxRail 8.0.xxx 29
● VMware does not support for TPM 1.2 in VMware vSphere 8.0. VxRail does not allow the upgrade for clusters containing
nodes with active TPM 1.2 modules. To upgrade to VxRail 8.0.x, disable TPM 1.2 or replace the TPM 1.2 modules with TPM
2.0. To upgrade to VxRail 8.0.x with active TPM 1.2 modules, see KB 204703.
NOTE: If your environment requires TPM, do not upgrade until you obtain TPM 2.0 modules for each node.
● RecoverPoint for Virtual Machines is not supported on VMware vSphere 8.0. Do not upgrade to VxRail 8.0.000 if you are
using RecoverPoint for Virtual Machines.
● VxRail models with DPUs require the approval of RPQ to deploy with or upgrade to VxRail 8.0.020 release. For more
information, see the KB 210758.
● The CloudLink version 8.0 is not available for VMware vSphere 8.0. If you are using VMware vSAN data store Encryption
with CloudLink, do not upgrade to VxRail 8.0.020 until CloudLink 8.0 is available.
● Before you upgrade to VxRail 8.x, SmartFabric Services (SFS) with VxRail installations that were deployed with VxRail
4.7.xxx or 7.0.000 through 7.0.3xx require decoupling. SFS with VxRail installations that were deployed with VxRail
7.0.400 through 7.0.411 require decoupling only if Automated VxRail Switch Configuration was set to Enabled during
deployment. If set to Disabled during deployment, decoupling is not required. See New Deployment Option for SmartFabric
Services with VxRail for information about this setting. For VxRail 7.0.x, decoupling procedures are available on SolVe Online
for VxRail under VxRail Procedures > Miscellaneous > 'How To' Procedures > Change other VxRail cluster settings.

Upgrades
● VxRail clusters using any application that creates flat.vmdk files (including Citrix) should not upgrade to VxRail 8.0.x now.
See KB 212825 for more information.
● A cluster requires VMware vSphere 8.0 license keys to run on VMware vSphere 8.0:
○ The life cycle management precheck does not stop you from upgrading without VMware vSphere 8.0 license keys.
○ Without VMware vSphere 8.0 license keys, the nodes run on 60-day evaluation license keys. To determine whether your
clusters need VMware vSphere 8.0 license keys and to acquire the license keys, see VMware Customer Connect.
● Due to the delay in availability of GPU drivers, do not upgrade VxRail clusters with any GPUs to VxRail 8.0.020.
● If you updated the multicast filtering mode to Basic, VMware VDS upgrade resets the multicast filtering mode to the default
IGMP or MLD snooping during VxRail LCM from 4.x or 7.0.x to a later version of 7.0.x or 8.0.x. Verify this setting before
initiating VxRail LCM to 7.0.x or 8.0.x. For more information, see KB 196307.

Fixed issues in VxRail 8.0.020

The following table lists the issues that are fixed in VxRail 8.0.020:

Table 13. Fixed issues in VxRail 8.0.020

Issue Issue description Release found Category
VXP-64842 LCM issue upgrading SKHynix SSD Firmware 7.0.410 LCM
7.0.410.
VXP-64433 RASR failed with "ERROR: script 7.0.372 Platform Service
30_convert_ese_key.sh execution error"
VXP-64387 VxRail Manager log bundle collection is blocked 7.0.400 Serviceability
by curl command testing.
VXP-64335 7.0.131 to 7.0.320 upgrade failing with the error 7.0.320 LCM
message, "Failed to update hosts certificate in
the VxRail Manager."
VXP-64122 Node add host_ips_validation timed out. 7.0.371 Day 2
VXP-64120 LCM process fail at 94% with the error 7.0.372 LCM
message, "recover drs timed out."
VXP-64117 7.0.320 L3 node add failed with error "Node 7.0.320 Day 2
failed to check the compatibility."
VXP-64113 The Internet Updates tab under the Updates 7.0.372 Day 2
view is displaying the message "No Available

30 VxRail 8.0.xxx
Table 13. Fixed issues in VxRail 8.0.020 (continued)
Issue Issue description Release found Category
System Updates" and also the Market view in
the VxRail plug-in is blank.
VXP-63931 Does psql upgrade need free space on /var/? 7.0.400 LCM
VXP-63924 Ansible based upgrade experienced possible 7.0.372 LCM
issue during LCM from 7.0.370 to 7.0.372.
VXP-63874 Update page displays 404 error after upgrade 7.0.320 LCM
to 7.0.400.
VXP-63864 LCM from 4.7 to 7.0.401 failed due to do-host 7.0.401 LCM
is not ready.
VXP-65126 False Radar warning occurring when 8.0.000 LCM
attempting to upgrade from 7.0.401 to 8.0.000
.

VxRail 8.0.010 package software

This section lists the components of the VxRail 8.0.010 software package.

VxRail Software
● VxRail Manager 8.0.010 build 27816828
● VxRail System 8.0.010 build 27816828
● VxRail Manager vCenter Plugin 9.2.0.0

VMware integration
● VMware ESXi 8.0 GA build 20513097
● VMware vCenter Server Virtual Appliance 8.0 GA build 20519528
● VMware vSAN 8.0 GA build 20513097

PowerEdge platform components

● BIOS: E660F, P670N, V670F: 1.8.2
● iDRAC: E660F, P670N, V670F: 6.00.30.00
● iSM: 4.3.1.0.19

What is new in VxRail 8.0.010

VxRail 8.0.010 is a manufacturing-only release that includes VMware ESXi 8.0 GA and VMware vCenter Server 8.0 GA. Support
is added for Data Processing Units (DPU) when used with VMware vSAN Original Storage Architecture (OSA).
See VMware vSphere 8.0 Release Notes for detailed information.

Upgrade information
VxRail version 8.0.010 is a manufacturing-only release and DPUs are only available on E660F, P670N, and V670F.
You cannot upgrade to VxRail version 8.0.010 from earlier VxRail software versions. You can upgrade from VxRail 8.0.010 to
later versions of VxRail software releases.

VxRail 8.0.xxx 31
Key Differences
● VxRail 8.0.x does not provide VMware vRealize Log Insight (VMware Aria Operations for Logs) license or software. See KB
212617 for details before upgrading or installing VxRail 8.0.x if you are using or intend to use VMware vRealize Log Insight.
● Do not apply STIG hardening to an 8.0.010 cluster. STIG hardening on VxRail cluster versions 8.0.000 or later is not
supported.
● Before you upgrade to VxRail 8.x, SmartFabric Services (SFS) with VxRail installations that were deployed with VxRail
versions 4.7.xxx or 7.0.000 through 7.0.3xx require decoupling. SFS with VxRail installations that were deployed with VxRail
versions 7.0.400 through 7.0.411 require decoupling only if Automated VxRail Switch Configuration was set to Enabled
during deployment. If set to Disabled during deployment, decoupling is not required. See New Deployment Option for
SmartFabric Services with VxRail for information about this setting. Decoupling procedures are available on SolVe Online for
VxRail under VxRail Procedures > Miscellaneous > 'How To' Procedures > Change other VxRail cluster settings.

Known issues in VxRail 8.0.010

The following table provides known issues for VxRail 8.0.010:

Table 14. Known issues in VxRail 8.0.010

Issue Summary Workaround
VMware PR VxRail nodes with DPU may have issues with See KB 212259.
3154255 VMware NSX configuration due to "ESXi on DPU"
license expiration.
VMware– VMware vSphere vMotion of VMs with an interface Avoid VMware vSphere vMotion of UPT-based VMs.
3039159 in Uniform Passthrough (UPT) mode and with high For more information, see KB210758.
number of flows might cause the host to PSOD.
VXP-58887 Unable to find VMware vSphere HA agent using The HA would be resumed automatically after 30–60
IPv6 single stack. minutes.
VXP-60155 Do First-run with T1 network failed at 99% "Failed Retry after few minutes.
to do vLCM remediation for cluster".

VxRail 8.0.000 package software

This section lists the components of the VxRail 8.0.000 software package.

VxRail Software
● VxRail Manager 8.0.000 build 27839057
● VxRail System 8.0.000 build 27839058
● VxRail Manager vCenter Plugin 9.2.1.0

VMware integration
● VMware ESXi 8.0 GA build 20513097
● VMware vCenter Server Virtual Appliance 8.0 GA build 20519528
● VMware vSAN 8.0 GA build 2051309

PowerEdge platform components

● BIOS:
○ G560/F: 2.16.1
○ E560/F/N, P570/F, V570/F, S570: 2.16.1

32 VxRail 8.0.xxx
 ○ P580N: 2.16.1
○ V670F, P670F/N, E660/F/N, S670: 1.8.2
○ E665/F/N, P675F/N: 2.9.3
● iDRAC:
○ G560/F: 6.00.30.00
○ E560/F/N, P570/F, V570/F, S570: 6.00.30.00
○ P580N: 6.00.30.00
○ D560/F: 6.00.30.00
○ V670F, P670F/N, E660/F/N, S670: 6.00.30.00
○ E665/F/N, P675F/N: 6.00.30.00
● iSM: 4.3.1.0.19

What is new in VxRail 8.0.000

VxRail 8.0.000 is a new generation of VxRail HCI system software. The considerations and restrictions described throughout this
release note should be reviewed by customers of VxRail 4.7.x and VxRail 7.0.x before attempting to upgrade to VxRail 8.0.000.

VMware vSphere 8.0

VMware vSphere 8.0 is the enterprise workload platform that brings the benefits of cloud to on-premises workloads.

New features
VxRail 8.0.000 includes VMware vSphere 8.0. VxRail version 8.0.000 supports VMware vSAN Original Storage Architecture
(OSA) and VMware vSAN Express Storage Architecture (ESA).
VxRail 8.0.000 includes the following features:
● VMware vSphere 8.0. See VMware vSphere 8.0 Release Notes for more information.
● VMware vSAN 8.0. See VMware vSAN 8.0 Release Notes for more information.

Security fixes
VxRail 8.0.000 contains fixes that resolve multiple security vulnerabilities. For more information, see the following Dell Security
Advisory (DSA):
● DSA-2022-336: Dell VxRail Security Update for Multiple Third-Party Component Vulnerabilities which addresses: VxRail
Manager: SUSE: Multiple package updates in SLES. See the DSA for more information.
● STIG: STIG hardening on VxRail cluster versions 8.0.000 or later is not supported. If STIG hardening was applied to a VxRail
cluster, you cannot upgrade to VxRail 8.0.000 and later.

Key Differences
● VxRail 8.0.x does not provides VMware vRealize Log Insight (VMware Aria Operations for Logs) license or software. See KB
212617 before upgrading or installing VxRail 8.0.x and if you are using or intend to use VMware vRealize Log Insight.
● Internet upgrades to VxRail 8.0.000 are not supported. Only local upgrades are supported. Use SolVe for VxRail to generate
a procedure to execute the upgrade.
● VxRail 8.0.020 does not support the Quanta hardware platform and VxRail E460/F, P470/F, S470, V470.
● VMware discontinued support for TPM 1.2 in VMware vSphere 8.0. VxRail does not allow the upgrade for clusters containing
nodes with active TPM 1.2 modules. To upgrade to VxRail 8.0.x, disable TPM 1.2 or replace the TPM 1.2 modules with TPM
2.0. Disable TPM 1.2 temporarily to perform the upgrade. For steps to upgrade to VxRail 8.0.x with active TPM 1.2 modules,
see KB 204703.
NOTE: If your environment requires TPM, do not upgrade until you obtain TPM 2.0 modules for each node.
● RecoverPoint for Virtual Machines is not supported on VMware vSphere 8.0. Do not upgrade to VxRail 8.0.000 if you are
using RecoverPoint for Virtual Machines.

VxRail 8.0.xxx 33
● DPUs are not supported in VxRail version 8.0.000.
● Cloudlink version 8.0 is not available for VMware vSphere 8.0. If you are using VMware vSAN Data Store Encryption with
CloudLink, do not upgrade to VxRail 8.0.000 until CloudLink 8.0 is available.
● Before you upgrade to VxRail 8.x, you must decouple SmartFabric Services (SFS) with VxRail installations that were
deployed with VxRail versions 4.7.xxx or 7.0.000 through 7.0.3xx. SFS with VxRail installations that were deployed with
VxRail versions 7.0.400 through 7.0.411 require decoupling only if Automated VxRail Switch Configuration was set to
Enabled during deployment. If set to Disabled during deployment, decoupling is not required. See New Deployment Option
for SmartFabric Services with VxRail for information about this setting. Decoupling procedures are available on SolVe Online
for VxRail for VxRail 7.0.x under VxRail Procedures > Miscellaneous > 'How To' Procedures > Change other VxRail
cluster settings.

Upgrades
● VxRail clusters using any application that creates flat.vmdk files (including Citrix) should not upgrade to VxRail 8.0.x. See KB
212825 for more information.
● You can only upgrade to VxRail 8.0.000 using the local upgrade option:
○ Before the upgrade, generate the appropriate VxRail upgrade in SolVe for the software update bundle.
○ The Internet upgrade option where VxRail Manager acquires the software update bundle using an internet download is
disabled.
● Customer-managed VMware vCenter Server plugin:
○ If you are using a customer-managed VMware vCenter Server environment, upgrade the VMware vCenter Server
environment to VMware vSphere 8.0 before upgrading to VxRail 8.0.000.
○ If you are using a customer-managed VMware vCenter Server environment, see KB 000204712 after updating your
VMware vCenter environment to VMware vSphere 8.0 to resolve a known issue with the VxRail plugin failing to deploy.
● VMware vSphere 8.0 license keys are required for a cluster to run on VMware vSphere 8.0:
○ The LCM precheck does not stop a user from upgrading without VMware vSphere 8.0 license keys.
○ Without VMware vSphere 8.0 license keys, the nodes run on 60-day evaluation license keys. Go to VMware Customer
Connect to determine if VMware vSphere 8.0 license keys are required for the clusters and to obtain them.
● Because the Internet download of the VxRail 8.0.000 software update bundle is not supported, CloudIQ does not support the
upgrade path to VxRail 8.0.000. Users cannot run LCM features on CloudIQ. Remote communication between the cluster
and CloudIQ does not use an internet connection, but CloudIQ relies on the internet upgrade to download the update bundle
from the VxRail software repository.
NOTE: Due to limited availability of GPU drivers for VMware ESXi 8.0, the GPU is validated after the VxRail 8.0.000
release. Clusters with GPUs should not be upgraded to VxRail 8.0.000 until they are confirmed.

Known issues in VxRail 8.0.000

The following table provides known issues for VxRail 8.0.000:

Table 15. Known issues in VxRail 8.0.000

Issue Summary Workaround
VXP-65477 P670N nodes with VxRail 7.0.360 to 7.0.372 may See KB 209959.
fail LCM to VxRail 7.0.400 and later.
VXP-61513 Enabling vLCM fails on limited network The recommended VxRail network bandwidth should be
environments. greater than 3 Mbps. When network use is low or idle,
retry enablement of the vLCM. The retry task can be
executed multiple times.

34 VxRail 8.0.xxx
 3
Upgrades
Notes and considerations for upgrading VxRail are provided.

Upgrade Notes
● VxRail 8.0.210: You cannot upgrade directly from VxRail 4.7.x to VxRail 8.0.210 and later.
● VxRail 8.0.120: You cannot upgrade to VxRail 8.0.120 from earlier VxRail versions. VxRail 8.0.120 is available only on a newly
manufactured VP-760 NVMe platform and VE-660 NVMe platform.
● VxRail 8.0.111: You cannot upgrade directly from VxRail 4.0.x or 4.5.x to VxRail 8.0.111.
If VMware NSX is running on the VxRail cluster and you are planning to change the VxRail LCM mode to vLCM, see KB
000190928. After vLCM is enabled, VMware NSX Manager performs updates independently of a VxRail cluster update.

Considerations
● Do not upgrade nodes containing DPUs to VxRail 8.0.200 and 8.0.201 due to firmware and driver requirements.
● Upgrades to VxRail 8.0.210 and 8.0.211 are supported for nodes containing DPUs. If your nodes contain NVIDIA Mellanox
DPUs, contact Dell Technical Support and also see KB 221120 before initiating an upgrade.
● Do not upgrade clusters running VxRail 8.0.111 to VxRail 8.0.200. For more information, see VxRail 8.0.x upgrade methods.
Fixes in VxRail 8.0.111 that are not in VxRail 8.0.200 are lost following the upgrade.
● For VxRail 8.0.000 and later, the RecoverPoint for Virtual Machines splitter VMware Installation Bundle (VIB) is incompatible
with vLCM mode that is enabled on VxRail. If you are using RecoverPoint for Virtual Machines with vLCM mode enabled,
contact Dell Support before the next upgrade cycle.
● Third-party VIB updates can only be added in customize components in the VxRail LCM workflow when VxRail has vLCM
mode enabled. Other methods for updating third-party VIBs outside of VxRail Manager are highly discouraged and can result
in subsequent updates to fail.
● VxRail clusters using any application that creates flat.vmdk files (including Citrix) should not upgrade to VxRail 8.0.x. See KB
212825 for more information.
● If the Multicast filtering mode is set to Basic, the VMware VDS upgrade resets the mode to the default IGMP/MLD
snooping during VxRail LCM from 4.x or 7.0.x to a later version of VxRail 7.0.x or VxRail 8.0.x. Verify this setting before
initiating VxRail LCM to VxRail 7.0.x or VxRail 8.0.x. For more information, see KB 196307.
● VMware vSphere 8.0 does not support TPM 1.2. Upgrading to VxRail 8.0.000, 8.0.010, and 8.0.020 for 14G servers with
enabled TPM 1.2 modules is not permitted by VMware and VxRail Manager. The LCM precheck fails in such cases. VMware
and VxRail Manager allow users to upgrade to VxRail 8.0.100 and later versions using the LCM tool. After the upgrade, the
TPM 1.2 modules become nonfunctional as VxRail Manager turns off the TPM security setting in the BIOS. VxRail Manager
sets the TPM security to Off in the BIOS as part of the upgrade.
○ If you require TPM functionality and want to upgrade to a TPM 2.0 module or manually disable the TPM 1.2 module, see
KB 204703 for more information.
○ If your environment requires TPM, before you upgrade, you must obtain TPM 2.0 modules for each node.
● VxRail uses Dell Technologies next-generation consolidated connectivity solution to connect to the Dell Cloud. This solution
allows VxRail to establish a direct connection using a connectivity agent that runs within VxRail or the secure connect
gateway 5.0.
● VxRail 8.0.000 does not support Secure Remote Services. Before you upgrade to VxRail 8.0.x, review the following:
○ See KB 196945 and the Secure Remote Services 3.52 Upgrade to Secure Connect Gateway Supplement Documentation.
○ If you are connected to a secure connect gateway, verify that the minimum gateway version is 5.00.07.10.
○ If you are connected to an external Secure Remote Services gateway, upgrade to a secure connect gateway.
○ The firewall may require an update. For internal Secure Remote Services configurations, VxRail performs a seamless
internal Secure Remote Services upgrade to establish a direct connection during the VxRail upgrade process.
● For clusters running VxRail 7.0.130 and later, you can use multipart bundles for local upgrades to 8.0.000 and later. You must
download multiple files before beginning the upgrade.

Upgrades 35
● VxRail supports VMware vSphere Quick Boot and Suspend-to-Memory. Do not use Quick Boot or Suspend-to-Memory when
updating from previous versions of VxRail to VxRail 8.0.x and later.
● If you are running VMware solution software that is integrated with VxRail, check the specific solution release notes before
upgrading to a later version of VxRail to ensure support and compatibility.
● VxRail 8.0.x does not support the 13G platform and Quanta hardware platform.
● The VMware PSC must be embedded in the VMware vCenter Server VM:
○ For clusters with a VxRail-managed VMware vCenter Server deployment, the VxRail LCM upgrade to 8.0.x automatically
converges the customer-managed VMware PSC to a VxRail-managed VMware PSC embedded with the VMware vCenter
Server VM.
○ For clusters with a customer-managed VMware vCenter Server, the customer is responsible for manually converging the
customer-managed VMware PSC into an embedded PSC within the VMware vCenter Server VM before upgrading to
VxRail 8.0.x.
○ Use a VMware procedure to complete the conversion, and then run a VxRail provided script to update the PSC
information into the VxRail database. See KB 21166for more information.
● VMware vSphere 8.0 license keys are required for a cluster to run VMware vSphere 8.0:
○ The LCM precheck does not stop a user from upgrading without VMware vSphere 8.0 license keys.
○ Without VMware vSphere 8.0 license keys, the nodes run on 60-day evaluation license keys.
○ Go to VMware Customer Connect to access VMware vSphere 8.0 license keys.
○ Do not upgrade VxRail clusters with any GPUs to VxRail 8.0.020. This recommendation results from delays in drivers for
GPUs.
● If clusters are using VxRail ecosystem solutions (such as marketplace solutions), check with the ecosystem vendor or the
VxRail Simple Support Matrix for VMware vSphere 8.0 compatibility before upgrading to VxRail 8.0.x.
● For VxRail on PowerEdge platforms running VxRail 4.7.2xx and later with Secure Boot enabled, you do not need to manually
disable or enable upgrades to VxRail 8.0.000 before and after an LCM upgrade. The upgrade runs while keeping secure boot
enabled on the host. Verify that no unsigned VIBs are in the node to prevent adverse effects during a host boot.
● VxRail LCM bundle does not include updates to GPU firmware or drivers, VMware vRealize Log Insight, VMware NSX,
customer-managed VMware vCenter Server software, or add-on software such as VMware Horizon or the full VMware
vRealize Suite. Such third-party firmware and VIBs can be added or upgraded as part of the customize components in the
VxRail LCM workflow.

SolVe Online for VxRail

SolVe Online for VxRail contains complete information about VxRail upgrade procedures.

About this task

If your VxRail cluster has a customer-managed VMware vCenter Server, see KB 543028 to run a manual convergence script.
If you are upgrading from a VxRail version earlier than 4.7.301 or at 4.7.400, see KB 157746 to run a manual expansion script for
the /data/store2 drive.

Steps
1. Go to SolVe Online for VxRail and select VxRail Procedures.
2. Click Upgrade > Software Upgrade Procedures.
3. Select your hardware version, starting software version, and target upgrade version. Click Next.
4. Answer questions about your VxRail environment and click Generate.
5. Follow the steps in the generated SolVe procedure to upgrade your VxRail.
The generated procedure includes the location of the upgrade bundle files.

Direct upgrade paths

This section lists the supported direct upgrade paths.
The following table lists the direct upgrade paths to VxRail 8.0.212:

36 Upgrades
Table 16. Direct upgrade paths
VxRail 8.0.x VxRail 7.0.x
● 8.0.000 -> 8.0.212 ● 7.0.010 -> 8.0.212
● 8.0.010 -> 8.0.212 ● 7.0.100 -> 8.0.212
● 8.0.020 -> 8.0.212 ● 7.0.101 -> 8.0.212
● 8.0.100 -> 8.0.212 ● 7.0.130 -> 8.0.212 (only local upgrades are supported)
● 8.0.101 -> 8.0.212 ● 7.0.131 -> 8.0.212 (only local upgrades are supported)
● 8.0.110 -> 8.0.212 ● 7.0.132 -> 8.0.212
● 8.0.111 -> 8.0.212 ● 7.0.200 -> 8.0.212
● 8.0.120 -> 8.0.212 ● 7.0.201 -> 8.0.212
● 8.0.200 -> 8.0.212 ● 7.0.202 -> 8.0.212
● 8.0.201 -> 8.0.212 ● 7.0.203 -> 8.0.212
● 8.0.210 -> 8.0.212 ● 7.0.210 -> 8.0.212
● 8.0.211 -> 8.0.212 ● 7.0.240 -> 8.0.212
● 7.0.241 -> 8.0.212
● 7.0.300 -> 8.0.212
● 7.0.320 -> 8.0.212
● 7.0.350 -> 8.0.212
● 7.0.360 -> 8.0.212
● 7.0.370 -> 8.0.212
● 7.0.371 -> 8.0.212
● 7.0.372 -> 8.0.212
● 7.0.380 -> 8.0.212
● 7.0.400 -> 8.0.212
● 7.0.401 -> 8.0.212
● 7.0.405 -> 8.0.212
● 7.0.410 -> 8.0.212
● 7.0.411 -> 8.0.212
● 7.0.420 -> 8.0.212
● 7.0.450 -> 8.0.212
● 7.0.451 -> 8.0.212
● 7.0.452 -> 8.0.212
● 7.0.453 -> 8.0.212
● 7.0.460 -> 8.0.212
● 7.0.480 -> 8.0.212
● 7.0.481 -> 8.0.212
● 7.0.482 -> 8.0.212
● 7.0.483 -> 8.0.212
● 7.0.484 -> 8.0.212

VxRail 8.0.x upgrade methods

This section lists the available upgrade methods for each supported upgrade target version available for VxRail 8.0.x.
The following table lists the VxRail 8.0.x upgrade methods:

Upgrades 37
 Table 17. VxRail 8.0.x upgrade methods
38

Installe Target version

d
Upgrades

version 8.0.212 8.0.211 8.0.210 8.0.201 8.0.200 8.0.120 8.0.111 8.0.110 8.0.101 8.0.100 8.0.020 8.0.010 8.0.000

8.0.211 Local and — — — — — — — — — — — —

internet
8.0.210 Local and L/U — — — — — — — — — — —
internet
8.0.201 Local and L/U L/U — — — — — — — — — —
internet
8.0.200 Local and L/U L/U L/U — — — — — — — — —
internet
8.0.120 Local and L/U L/U N/S N/S — — — — — — — —
internet
8.0.111 Local and L/U L/U L/U N/S N/S — — — — — — —
internet
8.0.110 Local and L/U L/U L/U L/U N/S L/U — — — — — —
internet
8.0.101 Local and L/U L/U L/U L/U N/S L/U L/U — — — — —
internet
8.0.100 Local and L/U L/U L/U L/U N/S L/U L/U L/U — — — —
internet
8.0.020 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U — — —
internet
8.0.010 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U N/S — —
internet
8.0 000 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U L/U N/S —
internet
7.0.484 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U L/U N/S —
internet
7.0.483 Local and N/S N/S N/S N/S N/S N/S N/S N/S N/S N/S N/S N/S
internet
7.0.482 Local and L/U L/U N/S N/S N/S N/S N/S N/S N/S N/S N/S N/S
internet
7.0.481 Local and L/U L/U N/S N/S N/S N/S N/S N/S N/S N/S N/S N/S
internet
 Table 17. VxRail 8.0.x upgrade methods (continued)
Installe Target version
d
version 8.0.212 8.0.211 8.0.210 8.0.201 8.0.200 8.0.120 8.0.111 8.0.110 8.0.101 8.0.100 8.0.020 8.0.010 8.0.000

7.0.480 Local and L/U L/U N/S N/S N/S N/S N/S N/S N/S N/S N/S N/S
internet
7.0.460 Local and L/U L/U N/S N/S N/S N/S N/S N/S N/S N/S N/S N/S
Internet
7.0.453 Local and L/U L/U N/S N/S N/S N/S N/S N/S N/S N/S N/S N/S
internet
7.0.452 Local and L/U L/U L/U L/U N/S L/U L/U N/S N/S N/S N/S N/S
internet
7.0.451 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U N/S N/S N/S
internet
7.0.450 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U N/S N/S N/S
internet
7.0.420 Local and L/U L/U N/S N/S N/S N/S N/S N/S N/S N/S N/S N/S
internet
7.0.411 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U N/S N/S N/S
internet
7.0.410 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U L/U N/S N/S
internet
7.0.405 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
internet
7.0.401 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
internet
7.0.400 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
internet
7.0.380 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
internet
7.0.372 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
internet
Upgrades

7.0.371 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
internet
7.0.370 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
internet
39
 Table 17. VxRail 8.0.x upgrade methods (continued)
40

Installe Target version

d
Upgrades

version 8.0.212 8.0.211 8.0.210 8.0.201 8.0.200 8.0.120 8.0.111 8.0.110 8.0.101 8.0.100 8.0.020 8.0.010 8.0.000

7.0.360 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
internet
7.0.350 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
internet
7.0.320 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
internet
7.0.300 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
internet
7.0.241 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
internet
7.0.240 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
internet
7.0.210 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
internet
7.0.203 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
internet
7.0.202 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
internet
7.0.201 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
internet
7.0.200 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
internet
7.0.132 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
internet
7.0.131 L/U L/U L/U L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
7.0.130 L/U L/U L/U L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
7.0.101 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
internet
7.0.100 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
internet
7.0.010 Local and L/U L/U L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
internet
 Table 17. VxRail 8.0.x upgrade methods (continued)
Installe Target version
d
version 8.0.212 8.0.211 8.0.210 8.0.201 8.0.200 8.0.120 8.0.111 8.0.110 8.0.101 8.0.100 8.0.020 8.0.010 8.0.000

4.7.560 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.550 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.542 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.541 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.540 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.536 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.535 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.533 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.532 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.531 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.530 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.527 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.526 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.525 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.521 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.520 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.515 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.512 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.511 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.510 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.500 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.411 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
Upgrades

4.7.410 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.400 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.301 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.300 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
41
 Table 17. VxRail 8.0.x upgrade methods (continued)
42

Installe Target version

d
Upgrades

version 8.0.212 8.0.211 8.0.210 8.0.201 8.0.200 8.0.120 8.0.111 8.0.110 8.0.101 8.0.100 8.0.020 8.0.010 8.0.000

4.7.212 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.211 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.210 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.200 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.111 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.110 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.100 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.001 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
4.7.000 N/S N/S N/S L/U L/U N/S L/U L/U L/U L/U L/U N/S L/U
N/S=Not supported
L/U=Local upgrade

Upgrades 43