Scribd
Upload
4 views1 page

12618190859

The document outlines the steps for configuring and creating trimmer profile data, including printing test images and extracting PDF data. It emphasizes the importance of checking post-processing positions and preparing a trimmer unit if necessary. The final steps involve printing DTP data and performing post-processing adjustments based on the trimmer profile data.

Uploaded by

lgiovanardi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4 views1 page

12618190859

The document outlines the steps for configuring and creating trimmer profile data, including printing test images and extracting PDF data. It emphasizes the importance of checking post-processing positions and preparing a trimmer unit if necessary. The final steps involve printing DTP data and performing post-processing adjustments based on the trimmer profile data.

Uploaded by

lgiovanardi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Configure the trimmer profile data

Refer to
1.2.2 (1) (e) Setting the trimmer profile

As a test print, print the trimmer profile


setting value to an image

Refer to
Create the trimmer profile data
1.2.2 (1) (c) Line drawing printout of the trimmer profile

Check the contents of No


the post-processing position
setting

Yes

Refer to
Extract the trimmer profile as PDF data 1.2.2 (1) (d) Saving the line drawing PDF data
of the trimmer profile

Create DTP data Refer to


(Use the trimmer profile PDF data 1.2.2 (2) DTP file
Create DTP data as a guide to assign image data)

Print the DTP data, reflect the trimmer


profile data, and perform the post-process

Check the print image and


the post-processing position

Check the post-processing position

No
Check the post-processing position Prepare a trimmer unit

Refer to 2. OVERVIEW OF THE ADJUSTMENT


Yes METHOD
Refer to 3. PAPER SKEW ADJUSTMENT
OF THE 2-SIDE SLIT
Preparation for the post-process is completed Refer to 4. FINISHING POSITION ADJUSTMENT

Perform the post-processing print

You might also like