Transportation & Industrial
MOLYKOTE® G Paste
A top-of-the-line assembly paste containing more than 60% molybdenum disulfide
to prevent seizure
Features Typical properties
• Heat-resistant (400°C) Specification writers: These values are not intended for use in
• Excellent load-carrying capacity; prevents seizure preparing specifications. Please contact your local MOLYKOTE®
• Low coefficient of friction, even under high loads sales representative prior to writing specifications on this product.
Standard(1) Test Unit Result
Composition Appearance Gray black
• Molybdenum disulfide (MoS2) JIS K 2220 Penetration (worked mm/10 310 to 360
• Mineral oil 60 times)
• Lithium soap NLGI class 0 to 1
Service temperature °C -20 to 120
Applications range(2)
Reduces break-in time, prevents seizures and extends service life Density g/cm3 1.86
for parts. Can be used at assembly, for sliding parts under high Press-fit test, coefficient 0.12
loads at low speeds, as a screw lubricant, and in metalworking. of friction(3)
JIS K 2220 Copper corrosion 1b
100°C, 2 hours
How to use
ASTM Four ball wear scar mm 0.91
Clean and degrease surface before application. The following D2266 (1,740 rpm, 392 N,
methods of application can be used: 1 hour)
• Burnishing – rub on with a cloth or deerskin. ASTM Falex weld load N 14,700
• Paint with brush – a thin, strong brush is recommended. D2670
• Aerosol spray. (1)
JIS: Japanese Industrial Standard. ASTM: American Society for
Testing and Materials.
(2)
Although the base oil will carbonize at temperatures in excess of 120°C,
Because molybdenum disulfide has a high specific gravity, it may the solid components will maintain lubrication up to 400°C. Maintains
separate. Mix well before use. lubrication up to 1,100°C if in an air-free environment.
(3)
Steel on steel, 1.5 mm/minute, press-fit pressure of 69 MPa.
Handling precautions
This product may irritate the skin or eyes. Wear safety equipment
as necessary when handling this product. In the event of contact Packaging
with skin or eyes, immediately rinse thoroughly with water and This product is available in 100 g tubes (60 tubes per case),
seek medical care if necessary. Wash hands thoroughly after 500 g cans (10 cans/case), 2 kg cans (4 cans/case), and
handling. 6 kg cans.
PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE
USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE
HANDLING, READ SAFETY DATA SHEETS AND CONTAINER
LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD
INFORMATION.
Usable life and storage
When stored, unopened in a cool, dark place this product, has a
usable life of 36 months from the date of production.
DuPont™, the DuPont Oval Logo, and all trademarks and service marks denoted with ™, ℠ or ® are owned by affiliates of DuPont de Nemours, Inc.
unless otherwise noted.
© 2002-2019 DuPont.
The information set forth herein is furnished free of charge and is based on technical data that DuPont believes to be reliable and falls within the normal
range of properties. It is intended for use by persons having technical skill, at their own discretion and risk. This data should not be used to establish
specification limits nor used alone as the basis of design. Handling precaution information is given with the understanding that those using it will satisfy
themselves that their particular conditions of use present no health or safety hazards. Since conditions of product use and disposal are outside our
control, we make no warranties, express or implied, and assume no liability in connection with any use of this information. As with any product,
evaluation under end use conditions prior to specification is essential. Nothing herein is to be taken as a license to operate or a recommendation to
infringe on patents.
Form No. 80-3083A-01 (09/19) AGP16148
