A4 gizli menu.
txt
Audi single-zone Climatronic hidden menu procedure
Turn key to II position and wait for the Audi Climatronic system to start.
Press both air recirculation and windshield defrost buttons.
On the display you should see 1C.
Select channel using temperature buttons.
Press air recirculation to read value of selected channel.
Press one of the temperature buttons to go back to channel select.
Turn key to 0 position to exit hidden menu.
Hidden menu channels list
1 – DTCs
2 – value of Interior Temperature Sensor, in Headliner (G 86)
3 – value of Interior Temperature Sensor, in Instrument Panel (G 56)
4 – value of Fresh Air Intake Temperature Sensor (G 89)
5 – value of Outside Air Temperature Sensor (G 17), front
6 – value of Outside Air Temperature Sensor
7 – value of Temperature Sensor At Fresh Air Blower (G 109)
8 – value of Temperature Regulator Flap Motor Potentiometer (G 92)
9 – value of Temperature Regulator Flap
10 – specified value of Temperature Regulator Flap
11 – value of Central Flap Motor Potentiometer (G 112)
12 – specified value of Central Flap
13 – value of Footwell/Defroster Flap Motor Potentiometer (G 114)
14 – specified value of Footwell/Defroster Flap
15 – value of Air Flow Flap Motor Potentiometer (G 113)
16 – specified value of Air Flow Flap
17 – speed (km/h)
18 – air Blower voltage (Volts)
19 – specified Fresh Air Blower voltage (Volts)
20 – A/C Compressor voltage (Volts)
21 – low voltage occurrences counter
22 – cycle condition of A/C Refrigerant High Pressure Switch (F 118)
23 – cycles of the A/C Refrigerant High Pressure Switch (F 118)
24 – cycles of the switches, absolute non-fluctuating
25 – kick-Down Switch
26 – engine Coolant Temperature (ECT) Warning Light
27 – engine Speed (RPM)
29 – A/C Compressor speed (RPM)
30 – SW version
32 – malfunction counter, Temperature Regulator Flap
33 – malfunction counter, Central Flap
34 – malfunction counter, Footwell/Defroster Flap
35 – malfunction counter, Air Flow Map
36 – cold end-stop, Temperature Regulator Flap Motor Potentiometer (G 92)
37 – hot end-stop, Temperature Regulator Flap Motor Potentiometer (G 92), max.
stop
38 – cold end-stop, Central Flap Motor Potentiometer (G 112)
39 – hot end-stop, Central Flap Motor Potentiometer (G 112)
40 – cold end-stop, Footwell/Defroster Flap Motor Potentiometer (G114)
41 – hot end-stop, Footwell/Defroster Flap Motor Potentiometer (G114)
42 – cold end-stop, Air Flow Map Motor Potentiometer (G 113)
43 – hot end-stop, Air Flow Map Motor Potentiometer (G 113)
44 – vehicle operation cycle counter
Sayfa 1
A4 gizli menu.txt
45 – calculated interior temperature
46 – outside temperature, filtered, for regulation
47 – outside temperature in deg C
48 – outside temperature
49 – malfunction counter for speed signal
50 – standing time (in minutes)
51 – engine Coolant Temperature
52 – graphics channel 1 – A/C compressor switch-off conditions are identified by
illuminated segments of the “88.8” display.
53 – graphics channel 2 – Climate system electrical outputs are identified by
illuminated segments of the “88.8” display.
54 – control characteristics
55 – outside temperature for FIS/DIS
56 – temperature in deg C, from Interior Temperature Sensor, in Headliner (G 86)
57 – temperature in deg C, from Interior Temperature Sensor, in Instrument Panel
(G 56)
58 – temperature in deg C, from Fresh Air Intake Duct Temperature Sensor (G 89)
59 – temperature in deg C, from Outside Air (Ambient) Temperature Sensor (G 17),
front
60 – temperature in deg C, from Ambient Temperature Sensor At Fresh Air Blower
(G 109)
61 – software version
86 – display Check
Sayfa 2
