DELTA-LUBE® 10 GRÜN
Article number: 08405573
DELTA-LUBE® 10 GRÜN is a lubricant for a zinc flake basecoat. With this lubrication you can
improve assembly properties or you can achieve a slight colouring.The DELTA-LUBE® 10 GRÜN is
applied via a non-electrolytic application technique directly onto the substrate (part). The zinc
flake technique is described in the standards DIN EN ISO 10683 and DIN EN ISO 13858. The
application technology can vary according to the dimension and weight of the part; e.g. small
parts are usually coated as dip-spin, bigger parts are usually spray coated.All Dörken MKS
products have always been free of harmful heavy metals such as chromium VI. As there is no
hydrogen involved during the application process, there is no danger of application-related
hydrogen-induced stress corrosion cracking.[
CATEGORY
Lubrication
1/4 Dörken Coatings NA, 11200 Cedar Knoll Drive, PO Box 429, Grass Lake, Michigan 49240, U.S.A. Date: 03/30/24
Phone: +1 517 522 4600, Email: info@doerkenusa.com, Web: www.doerkenusa.com
REQUIREMENTS
Corrosion resistance
enhances the corrosion protection of the basecoat
Special features
inorganic
water-based
integrated lubricant
gaugeability
Defined coefficient of friction window
µtot = 0,09-0,14 (VDA 235-101 & DBL 9440)
µtot = 0,08-0,16 (VW 01129)
hot loosening torque > 0,06 ( (VDA 235/203, VW 01131-2)
multiple tightenings against different bearing surfaces acc to VW 01131-1
prevents stick-slip effects as according to VDA 235-203
Media resistance
fulfils chemical resistance against operating fluids according to DIN EN ISO 2812
Resistance against
Corrosion resistance
Media resistance
Defined coefficient of friction window
Surface / Substrate
zinc flake basecoat
extreme thin layers of 1-3 µm possible
Even layer construction possible.
The technical feasibility depends on pretreatment and individual characteristics of each
material.
2/4 Dörken Coatings NA, 11200 Cedar Knoll Drive, PO Box 429, Grass Lake, Michigan 49240, U.S.A. Date: 03/30/24
Phone: +1 517 522 4600, Email: info@doerkenusa.com, Web: www.doerkenusa.com
Application technology
dip-spin spray
Legal conditions
meets the EU End-of-Life Vehicle Directive 2000/53/EC
meets the RoHS 2 guidelines (also known as EU Directive on the Restriction of the Use of
Certain Hazardous Substances in Electrical and Electronic Equipment 2002/95/EC)
meets the REACh requirements
Contact Person
Thorsten Speck
SELECTION OF SUITABLE PARTS
Advised parts
Metrical threaded Metrical threaded Nuts
bolts >M16 bolts M2-M16
3/4 Dörken Coatings NA, 11200 Cedar Knoll Drive, PO Box 429, Grass Lake, Michigan 49240, U.S.A. Date: 03/30/24
Phone: +1 517 522 4600, Email: info@doerkenusa.com, Web: www.doerkenusa.com
Suitable parts
Washers Panels Non metrical Stamped parts
threaded parts
SPECIFICATIONS
AGCO - FWN 10256 ArvinMeritor - AM P104
Daimler - DBL 9440 MAN - 183-3
SAF-HOLLAND - Technical Specification Volkswagen - TL 244
Volkswagen - TL 217 Volkswagen - TL 245
4/4 Dörken Coatings NA, 11200 Cedar Knoll Drive, PO Box 429, Grass Lake, Michigan 49240, U.S.A. Date: 03/30/24
Phone: +1 517 522 4600, Email: info@doerkenusa.com, Web: www.doerkenusa.com
Powered by TCPDF (www.tcpdf.org)
