Scribd
Upload
35 views2 pages

M Product Overview Ncs5700

The Cisco NCS 5500 system is a high-performance, modular router designed for data-center switching with features like centralized route processing and high-density line cards. It supports IP and MPLS switching at a low cost per 100G and includes various command modes for configuration and monitoring. The document also mentions the Cisco NCS 5700 Series, which builds on the NCS 5500 with the Cisco IOS XR7 operating system.

Uploaded by

erordavid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
35 views2 pages

M Product Overview Ncs5700

The Cisco NCS 5500 system is a high-performance, modular router designed for data-center switching with features like centralized route processing and high-density line cards. It supports IP and MPLS switching at a low cost per 100G and includes various command modes for configuration and monitoring. The document also mentions the Cisco NCS 5700 Series, which builds on the NCS 5500 with the Cisco IOS XR7 operating system.

Uploaded by

erordavid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Cisco NCS 5500 Product Overview

Cisco NCS 5500 system is a high fault-resilient platform, which provides next generation data-center switching
environment with high bandwidth and low latency.
Cisco NCS 5500 system provides:
• A modular router with a centralized route processor with multiple line card per chassis.
• High density, high performance, and merchant silicon-based line cards.
• IP and MPLS switching at a low cost per 100G.
• Label Switched Router (LSR) and possible Light Label switched Edge Router (LER) features and
functionality with limited hardware scale and software functionality.

Note The Cisco Network Convergence System (NCS) 5700 Series builds on the Cisco NCS 5500 fixed systems by
combining the forwarding ASIC design with the Cisco IOS XR7 OS. The Cisco NCS 5700 series includes
the following variants:
• NCS-57B1-6D24
• NCS-57B1-5DSE

These variants of the NCS 5700 series run on the Cisco IOS XR7 operating system. For information about
setting up the routers, see Setup Cisco NCS 5700 Series Routers with XR7 OS. For information about installing
the XR7 OS on NCS 5700 series, see Install Cisco IOS XR7 on NCS 5700 Series Routers.

• Command Modes, on page 1

Command Modes
The router runs on virtualized Cisco IOS XR software. Therefore, the CLI commands must be executed on
virtual machines, namely the XR LXC and the System Admin LXC.
The command modes are applicable for the Cisco NCS 5500 Series Routers. This table lists the command
modes for the LXCs.

Cisco NCS 5500 Product Overview


1
Cisco NCS 5500 Product Overview
Command Modes

Command Mode Description


XR EXEC mode Run commands on the XR LXC to display the operational state of
the router.
(XR LXC execution mode)
Example:
RP/0/RP0/CPU0:router#

XR Config mode Perform security, routing, and other XR feature configurations on


the XR LXC.
(XR LXC configuration mode)
Example:
RP/0/RP0/CPU0:router#configure
RP/0/RP0/CPU0:router(config)#

System Admin EXEC mode Run commands on the System Admin LXC to display and monitor
the operational state of the router hardware. The chassis or
(System Admin LXC execution mode)
individual hardware modules can be reloaded from this mode.
Example:
RP/0/RP0/CPU0:router#admin
sysadmin-vm:0_RP0#

Admin Configuration modeSystem Run configuration commands on the System Admin LXC to manage
Admin Config mode and operate the hardware modules of the entire chassis.
(System Admin LXCconfiguration Example:
mode)
RP/0/RP0/CPU0:router#admin
sysadmin-vm:0_RP0#config
sysadmin-vm:0_RP0(config)#

Cisco NCS 5500 Product Overview


2

You might also like