Yabenr
Entertainment Projector
Pro V7 Projector
Support@yaberte
CONTENTS
YABER Lifetime Professional Support o1
TIPS o1
PACKAGE LIST 02
PROJECTOR SPECIFICATIONS 02
PROJECTOR OVERVIEW. 03
REMOTE CONTROL 05
INSTALLATION 06
1. Installation Method 06
2. Projection Distance and Size- o7
3. Install on the Ceiling o7
STARTING PROJECTOR 08
IMAGEADJUSTMENT 08
1. Focus Adjustment 08
2. Digital 6D Keystone Correction 00
SETTING UP THE PROJECTOR 10
1. Select The Input Signal Source. 10
2. USB Disk Input Mode 11
3. WiFi Setting. 12
31108 Castifor iOS Devices) 13
3.2 Miracast(for Android Devices) i
3.3 Wired Screen Miroring(for 0S Device) 15
3.4 Wired Screen Miroring (or Android Devices) 15
4. Bluetooth Setting 16
5. Projector Setting Menu 17
5.1 Projection Mode. 17
5.2 Sound Menu 21
53 Time Menu 21
5.4 Option Menu 2
6. Screen Mirroring System Update 2
SIGNAL LINES CONNECTION- 2
1. Connect USB Disk- 2
2. Connect the Devices via the HDMI ports 2
3. Connect to the DVD Player- 2
4. Connect to the Soundbar/Speaker. 2
SAFE SHUTDOWN 2
WARRANTY 2
TROUBLESHOOTING 2
upport@yabertech.com
YABER Lifetime Professional Support
Dear customer,
Thank you very much for supporting YABER!
Please read this manual thoroughly before using the projector. If you have
any issues, email your order number and the problem to
Support@yabertech.com. We will provide a fast solution in 24 hours.
Actually, many problems can be easily solved by setting, such as no signal,
no sound, bluetooth connection failed, WiFi connection failed, dark spots,
choppy animation etc. We promise all the projectors have been 100%
carefully checked and packaged before shipping.
If you have any questions, could you please contact us so that the problem
can been solved. And give us an opportunity to improve. We guarantee we
will provide you a satisfactory solution.
Thanks for your understanding!
YABER Service Team
TIPS:
1.Do not place projector in too warm or too cold room, because the high
temperature or low temperature will shorten lifespan of the device. The
working environment would be 5°C~35°C better.
2.If there are black spots on the projection screen, please don't worry,
please contact Support@yabertech.com via email, we can send you a video
about how to remove the dust.
3.The ventilation is equipped for the projector to work stably. Don't cover the
vent with cloth, blanket or other things. Don't insert anything into the siit of
the projector, or it may produce a short circuit or an electric shock to your
device and cause damage.
4.The projector shall be strictly protected from strong impact, extrusion and
vibration. Do not try to move and on strong impact, extrusion and vibration.
Do not try to move and the internal circuit faults.
5.Lens, as the core component of the projector, is directly related to the
picture definition and effect. The excessive dust thereon wil affect image
quality. The dirty lens shall be wiped with soft cotton cloth for the glass lens
surface. Hard cloth or abrasives shall not be used.
01
=4 Support@yabertech.com @
PACKAGE LIST
YABER V7 Projector1| Remote Control*1 Power Cord*1
HDMI Cable*1 3-in-1 AV Cable Lens Cover*1
Cleaning Cloth*1 User Manual*1 Cleaning Kit*1
PROJECTOR SPECIFICATIONS
Model No. V7
Native " Keystone 6D Keystone Correction &
Resolution | 1920"1080P Correction Manual VerticalHorizontal
Display ogy | LD
e Light Source | LED
Color Gamut | 16.7M Full Aspect Ratio | 4:3/16:9
Recommended Minimum
Projecton 7,813t Projection 551t
Distance Distance
oPower Actoo240v Projector
| froleet 481b
ture File | JPGUPEG! HOMI*2/USB*2/3.5mm
Picture File | Byp/pNG Interfaces Headphone jack/AV
;’;figg"" Front/Rear on Desk, Front/ Rear on Ceiling
Video File | 3GP/AVIIFLV/MP4/MPGIVOB/TS/M2TS/DAT/MKV
Audio File | MP3/APE/AAC/FLAC/OGG/WAVWMA/MID/DTS/MA4A
02
=4 Support@yabertech.com @
PROJECTOR OVERVIEW,
-)
clne ) 6 00
I]
118 Height Adjustment Screw Adjust the height of the projector
25 |IR Window Infrared signal receiver
3| Projector lens. Optical coated glass lens
4| Power Cord Port Power Cord Port
6 | Headphone Jack 3.5mm Headphone Output
7/10 | HDMI Ports HDMI 1 input / HDMI 2 input
8 |USB Ports USB port above
USB port below: USB-T port
9 |AVPort Audio input
11| Speakers Speakers stereo 5w
12 | Vents Prevent the projector from overheating
13 | Focus Ring Adjust the focus ring to get the clearest image
14 | Detachable Dust Push the switch from the right to open the
Filter Switch detachable dust fiter
15 | Detachable Dust Filter | Clean the dust (if the screen has a black spot)
16 | Bottom label Nameplate on the bottom of the projector
17 | Rubber Pads Protective padsiremove to install ceiling mount
O
1. Power Key
2.Back
3.0KKey
[ 4. Arow Key
1| Power Tum onloffthe power
2 Back Return to the previous menu
3 OK Confirm the option/6D Function
4 Arrow Keys Used to adjust the parameter of the projector in the
menu mode
04
REMOTE CONTROL
Power
2 Source
3. Arrow keys
4. Menu
5.6D Function
6. Volume +
7. Volume -
8. Mute
9. Homepape
10. Confirmation key
(Play and Pause)
11. Return
12. Previous
13. Next
11O [ Tomonotinesove
2| @ | selectine nputsignai source
Used 1o adjust the parameter of the projector in the
3 menu mode
4 Press once: Back (o the menu interface
= Press twice in succession: select 16:9/4:3 projection
5 Press once: 6D funclion mode 1
6D Long press for 3 seconds: 6D function mode 2
6 | g+ | Voumeup
7 4- | Volume down
8 ) | Close the sound
9| @ | Becktomanmens
10| (3) | contim the optionPiay or pause the video
11| © | Retumtothe previous menu
12| M4 | Switch to the previous video
13| PM | Switch tothe next video
05
upport@yabertech.com
Note:
1).Install 2 pieces of AAA batteries into the remote before using it. Do not
combine new batteries with old ones in remote controller, which can cause
operation failure due to insufficient power supply.
2).When using the remote controller, please make sure that the signal
transmitter of the remote controller aims at infrared signal receiver of the
projector.
3).If you are not using the remote controller for an extended period, please
take out batteries to prevent batteries leakage.
INSTALLATION
1.Installation Method
The projector can be hanged on the ceiling with special hanger frame, and
placed on the stable desk to project the image according to the operating
environment and requirements. In addition, the projector can be installed with
Adj ~ AAA
1.Front projection Ceiling mount | 2.Rear projection Ceiling mount
T ==Y
3.Front projection Table mount 4 Rear projection Table mount
Keep the projector at a height where its lens is axial symmetry to the screen.
Ifthis is not possible, use the keystone correction function to adjust the
projection image.
If you want to get a free projection screen,please contact us via
Support@yabertech.com
06
upport@yabertech.com
Aspect Ratio: 16:9
Distance (ft.) Screen Size
5.50 50"
7.80 70"
1.0 100"
13.0 120"
16.4 150"
218 200"
The recommended projection distance is about 11ftthe shortest projection
distance is 5.5ft.
The image size depends on the distance between projector and screen, there
may be 3% deviation among above listed data. Different settings cause
various distances.
2.Install on the Ceiling
Screw holes
APlease purchase an universal projector celling mount;
B.Remove the four rubber pads on the botiom of the projector, you will see the
screw holes and use the M5*11mm screws for installing the ceiling, and then
install it.
o7
Support@yaberte
STARTING PROJECTOR
1)Press the power key on the remote or projector, the indicator light wil turn blue;
2)Adjust the focus ring on the left side of the projector to get the best image
performance; (If it s still blurry, please try to adjust the projection distance.)
3)Use the 6D keystone function of the projector to get a rectangle projection
screen;
4)Connect the external device (Smart phone, iPad, Amazon Fire TV, TV box, DVD
player, Computer, etc.) in the corresponding interfaces of the projector, please be
sure to select the corresponding source. If you do not select the correct source,
the projector will not be able to detect the signal.
5)Select the [Setting] menu, enter the [Options] menu, and then you can select
the option [OSD Language] to set the preferred language of your main system
PS: Select the [Screen Mirroring] menu,enterthe [Settings] menu-{System
Setting] menu, then you can select the option [Language] to set the preferred
language of your Screen Mirroring system.
IMAGE ADJUSTMENT.
When using the projector for the first time, it normally displays an unclear
image. This is due to the lens being out of focus or the incorrect trapezoid
setting.
Please follow the below steps to correct:
1.Focus Adjustment
Focus Ring
08
Rotate the focus ring slowly. At the same time, check the focus point carefully.
The best focus point for the lens would be where the image most clear.
Note: If it is still blurry, please try to adjust the projection distance.
uto 6D keystone Correction Function
Turn on the projector. Make sure the lens (A) is facing at the screen/wall (B).
B B
fl“ A A
D
Mode 1:
1.Press the 6D button on the remote control once to enter Auto 6D keystone
correction mode 1.
2.Adjust the projection direction, the projection screen will automatically
restore to a rectangle.
3.Press the 6D button on the remote control again, the four corners of the
projection screen will disappear and exit Auto 6D keystone correction mode.
Mode 2:
1.Long press the 6D button on the remote control (or press and hold the OK
button on the projector ) to enter 6D keystone correction mode 2.
2.Adjust the projection direction, the projection screen will automatically
restore to a rectangle.
avLongogress the 6D button on the remote control to exit 6D keystone correc-
tion mode.
Note: 1.In mode 1 and mode 2, the auto 6D keystone correction function
will work automatically.
2.If you are not satisfied with the projection effect after correction, please
disable the auto 6D keystone correction function, short press the 6D button on
remote control to reopen mode 1 and repeat the above operation.
3.The above operation must be repeated every time after the machine is
turned on.
4.The projector cannot perform manual keystone correction in Auto 6D
keystone correction mode.
5.The 6D function supports side projection. However, if the side projection
angle is too large, some pixels will be lost on the side, please understand!
SETTING UP THE PROJECTOR
The projector's home page is as follow.
) o1
Screen Mioring nusic
1.Select The Input Signal Source
Select the desired input signal source (HDMI1/HDMI2/AV) on the home-page
10
2.USB Disk Input Mode
2.1.Play Movie/Music/Photo/TXT in the USB Disk Input Mode
1).Input the USB Disk, select [ USB ] on the homepage and enter;
2).Select the option [ Movie/Music/Photo/TXT]
3).Select the desired file (or folder to enter the subfolder) in the USB disk, then
press the [ OK ] button to play it.
PS:
a.lf you enter from the [Movie] menu, you can only play the video. The same
as other 3 option.
b.U disk cannot play PPT files, but you can play PPT files by connecting to a
computer.
2.2 Play Interface
Picture Mode
Function
el EIVIERIE]RE
Select play mode (directory play/single cycle/directory loop)
Switch to the previous video
Fast Backward rewinds the video back quickly while playing i
The rewinding speed ranges from 2X to 32X
Play or pause the current videot
Fast Forward, pushes the video to move forward quickly while
playing it. The forward speed ranges from 2X to 16X
Switch to the next video
Select all playists in the current folder
TV Setting
TVSetting
Picture Mode
Sound Mode
Menu Content Mode Function
Brightness
Contrast Modify the picture
Picture Mode | User/Standard/VividiSoft parameters in the
Saturation range 0-100
Sharpness
120Hz
Sound Mode | User/StandardiNews/ 500Hz Modify the sound
Music/Sport 1.5KHz parameters in the
range 0-100
5KHz
10KHz
3.WiFi Setting
Wireless Connection
Warming Tip:
(IThe fluency of screen mirroring with wireless connection will be affected by
the network environment. A bandwidth of 100Mbit or more is recommended
when using screen mirroring
(2 Make sure your mobile device is close to the projector when using wireless
connection. A distance within 1 meter is recommended.
(3)Some mobile devices may not support screen mirroring due to the compati-
bilty.
(DAny questions, please feel free to email YABER via
Support@yabertech.com.
upport@yabertech.com
3.1.i08 Cast (for iOS Devices)
1.Go to home page - Select the [ Screen Mirroring ] menu -- Select the [
Settings ] - Select the [ Network Setting Jmenu - Open the WiFi function -
Select your home WiFi from the list -- Connect the V7 projector to your home
WiFi.
2Back to [ Screen Mirroring ] menu — Select [ iOS Cast ] menu - Press the
OK button to enter the [0S Cast ] menu.
3.Select the [ Settings ] menu on your iOS device - Tum on the [ Wi-Fi]
function - Connect your iOS device to the same home network as the
projector.
4.0pen the [ Control Center ] on your iOS device ~ Select the [ Screen
Mirroring ] function - Select and connect the iOS Cast receiver named [
V7-0SCast-xxxx ] - your iOS device screen will be displayed on the
projection screen after 3 seconds.
3.2.Miracast (for Android Devices)
1.Go to [ Screen Mirroring ] menu -- Select the [ Miracast ] menu - Press the
OK button to enter the [ Miracast Setting ] Menu.
2.Select the [ Settings ] menu on your Android device - Select the [ Screen
mirroring ] function - Select your Miracast receiver named [ V7-AnCast-XXXX
1-- your Android device screen will be displayed on the projection screen after
3 seconds.
Wrless Projecton Wieless Projocton
(5] vrancastoces [ yrncastesss
wewe | oanceL CANCEL | DISCONNECT
3.0n your Android device, tap [ Settings ] -{ WLAN Display ] -Turn [ Wi-Fi ]
ON, Connect your home WiFi.
Note:
1.Different brands of Android phones have different operations for select
Screen Mirroring Display, please refer to your phone's manual.
[Multiscreen/Wireless display/WLAN display/Screen mirroring/Wireless
projection/Smart view etc. ]
2.Not all Android phones support this function. Please make sure it is support-
ed before use.
Support@yabertech.com
3.3 Wired Screen Mirroring( for iOS Device)
1. Go to [ Screen Mirroring ] menu — Select the [ iOS Cable Cast ] menu —
Press the OK button to enter the [ Wired Screen Mirroring Setting ] Menu.
2. Plug the original cable of your I0S equipmentto the USB-T Port.
3. Show with "Do you trust this equipment?”, tap "Trust".
3.4 Wired Screen Mirroring (for Android Devices)
1.Go to [ Screen Mirroring ] menu -- Select the [ Miracast ] menu ~ Press the
OK button to enter the [ Wired Screen Mirroring Setting ] Menu.
2Plug the original cable of your Android equipment to the USB-T Port.
3.Android devices settings:
(1)Enter the [Setting] page of your device, click [About phone], click [Build
number] 5 times;
(2)Return to the [Setting] page, click [System & updates], and enter
Developer options;
(3)Open the [USB debugging], tap OK in the pop-up window.
Settings
& About phone
Buld number el ontesg rted o 8.
Alow USS debugging?
pro
@ i =)
Note:
The USB cable MUST be the ORIGINAL cable or the cable which can transfer
the data, otherwise screen mirroring may fail. You can plug the cable into your
laptop to check the availability of transferring the data.
4.Bluetooth Setting
(1)Go to home page - Select the [ Setting ] menu - Select the [ OPTION |
menu - Select the [ BT Setting ].
(2)0pen the Bluetooth function and your Bluetooth device.
(3)Select [Availiable Device], click [&]to begin/stop search the bluetooth
devices nearby.
(4)Choose the Bluetooth device desired and press OK, wait a few seconds for
a successful Bluetooth connection.
Note:
1.The V7 projector is compatible with the Bluetooth headsets, Bluetooth
speakers and Airpods, but not the Bluetooth keyboards or Bluetooth phones.
2.If you have any question, please feel free to email YABER via:
support@yabertech.com
5.Projector Setting Menu
1.Select [Setting] menu on the projector's
home page.
2.Press"«4/P" key, the menu will move to
“PICTURE">*SOUND" >TIME” >>"OPTION".
3.Select the adjust interface,use“A/¥" key to
choose the wanted item.
4.Press"OK” or “4/P" to adjust the item
parameter.
5.1.PICTURE MENU
PICTURE MENU MODE FUNCTION
Picture Mode Medium, Soft, User, Vivid _| Switch among the image mode
Color Temperature Medium, Warm, User, Cool | Switch among the color
Aspect Ratio 16:9/4:3 Set up the aspect ratio of the image|
Noise Reduce OffLow/Middle/High Noise adjustment
Reduce Display Size 50%-100% Reduce he screen size from 100% 050%
Projection Direction Front/Rear
Front Rear onon Desk,
Gling | S8t 1P the projection mode
FourPoint Correction Setting | H Zoom:0~50%
V Zoom:0-50%
Keystone Correction Setting “30-+30
H Zoom:70%~100% Adjust HV Zoom Setting
Infinty Zoom Seting V Zoom:70%-~100%
Correction Resetting Reset the correction mode
upport@yabertech.com
5.1.1 Reduce Display Size
Step 1: Press the button to select the [Reduce Display Size] menu, then
press the [OK] bottom to enter the submenu.
Step 2: By pressing the button on the remote or projector, you can reduce the
height and width of projection size up to 50%.
KX,
Do
5.1.2 Projection Direction
,m% iAj
1.Front projection Ceiling mount 2.Rear projection Ceiling mount
%,mgzm
3.Front projection Table mount 4.Rear projection Table mount
upport@yabertech.com
5.1.3 FourPoint Correction Setting
When the projection screen is not rectangular, it can be adjusted by 4-point
keystone correction.
Step 1: Press the button to select the [ FourPoint Correction Setting ] menu,
then press the [ OK ] bottom to enter the submenu.
Step 2: Keep pressing the OK button on the remote control or projector to
select the point [
Step 3: Press the arrow keys on the remote or projector to adjust the
horizontal or vertical parameters, until the projection screen becomes the
desired rectangle.
Step 4: Press the arrow keys on the remote or projector to adjust the
horizontal or vertical parameters, until the projection screen becomes the
desired rectangle.
'.‘--
]
Keep pressing the OK button on the remote control or projector,
until the positioning icon appears at the point desired, then release the
button immediately.
: Press the arrow keys on the remote control or projector to
adjust the horizontal or vertical parameters.
: Press the 1 keys on the remote control to restore the original
parameters.
upport@yabertech.com
5.1.4 Keystone Correction Setting
Step 1: Press the W bution to select the [Keystone Correction Setting ]
menu, then press the [OK] bottom to enter the submenu.
Step 2: If the projection image shows as (1), press. Iheu button on the
remote or projector to increase the vertical parameter (-50~0), until to
achieve the projection image (2).
Step 3: If the projection image shows as (3), then press (hen button on the
remote or projector, and decrease the vertical parameter (0~50), until to
achieve the projection image (4).
W-lH (1) (2)
A-I @) @)
Keep pressing the -butlon on the remote control or projector to
choose Hor. /Ver. Correction or Rotate, then release the button immediately.
(ZZEEED : Press the [ button on the remote control or projector to
adjust the horizontal or vertical parameters.
o, :Pressthe = keys on the remote control to restore the original
parameters.
20
upport@yabertech.com
5.1.5 Infinity Zoom Setting
Step 1: Press the_button to select the [Infinity Zoom Setting] menu, then
press the [OK] bottom to enter the submenu.
Step 2: By pressing the button on the remote or projector, you can reduce
the height or width of projection size up to 70%.
0
[an) M — —
5.2 SOUND MENU
e
-3
oN
SOUND MENU MODE FUNCTION
Soundiods i ot S User Sandad | Sotup o seurdods
P oo Husing o bance
Surownd Sound | Osuround Sotup o o ode
5.3 TIME MENU
e
rweweny wooe | rucrion
™)
Sieep TMer | 3omini60min90min
21
upport@yabertech.com
5.4 OPTION MENU
OPTION MENU MODE FUNCTION
0SD Language English, France, Italian, Spanish,etc.|
oo
Set up the language displayed in
BT Setting On/Off ‘Connect the Bluetooth Devices
Restore Factory Default Reset the projector
Color Range Auto
Sotwars Updetes (U5B)| Updato st Update o proecors sofware
6.Screen Mirroring System Update
2
=4 Support@yabertech.com @
System Settings Menu MODE FUNCTION
Language. Engish, France, tallan, Spanishetc 5% 7 e mg;:g; gmfifl in
Local Update Please press OK e
Online Update Please press OK. [Online update screen mirroring
lsystem seting
Software Version
Restore Factory Defaut [Please press OK [Rosios use operaton appicaton corfguraton
Jandscreen mitong system seting
SIGNAL LINES CONNECTION
YABER V7 projector has 6 interfaces, HDMI ports*2/USB ports*2/3.5mm
headphone output/AV output. Please select the correct connecting port to
connect your device (PC, Phone, DVD Player, Sound bar, USB, PS4 etc.)
1.Connect USB Disk
1) Insert the U disk into either of the two usb input ports;
2) You can directly enter the start-up screen on the home page, select the
option [ Movie/Music/Photo/TXT]
3) Select the desired file (or folder to enter the subfolder) in the USB disk,
then press the [ OK ] button to play it.
2.Connect the Devices via the HDMI ports
1) Connect your TV stick or laptop to any HDMI port of the projector;
2) Enter the home page to select the corresponding HDMI1 or HDMI2 as the
signal source.
23
3.Connect to the DVD Player
Use the 3-in -1 AV cable in the package
1) Tum on your DVD player and the projector;
2) Connect the colorful female connectors to your DVD player's RCA cable
with the 3-in-1 AV cable in the package;
3) Connect the black connector to the AV port of the projector, enter the
home page to select [AV ] as the signal source.
4.Connect to the Sound bar/Speaker
If your speaker has AUX port, please use your 3.5mm audio cable connect
the projector and your speaker as the picture shows, enter the home page to
select [AV ] as the signal source.
SAFE SHUTDOWN
1.Press the (button on the projector or remote.
2.Unplug the power cord of the projector.
3.Cover the lens and store the projector in a cool and dry place.
WARRANTY
Thank you so much for your purchase and support! We provide 3-year
warranty for V7 projector. If you have any questions, please feel free to
contact us via Support@yabertech.com.
24
TROUBLESHOOTING
Problems listed below might occur during the operation of your projector.
Please refer to the possible factors which might cause the issue to do
troubleshooting
1. When turning on the power switch, the indicator light does not work.
1) The power might not be connected well.
2) Check the over-heat protection system.
2. The remote control does not communicate with the projector.
1) The power switch at the back of the projector is tumed on or off?
2) The remote control's batteries are depleted?
3) Something obstructing the signal between the remote and IR
4) Strong light on IR directly.
3. No image on the screen.
1) Is the channel set-up correct?
2) Is there an input signal ?
3) Is the input cable plugged well ?
4) Under PC mode, is the refresh rate > 75KHz ?
4. Blue screen,no picture,no sound.
Input cables connected right?
5.Picture right, no sound.
1)Input cables connected right?
2)Volume at min or on Mute.
6.Can't play the movies.
1)The format of the video is right?
2)Files are broken?
3)Device is broken?
8. There is picture, no sound?
The decode system doesn't match.
9. Can't find devices when connected with hard drive or flash drive.
Check if the device is broken.
10. Auto-off after working for a while.
1) The projector ventilation is blocked.
2) The voltage is not stable.
3) The over-heat protection system.
