ABT Catalog cover_FA 3/7/10 10:04 PM Page 1

Danaher Tool Group

14600 York Road, Suite A
Sparks, MD 21152

Phone 800-688-8949
Fax 800-234-0472
Website: www.armstrongtools.com

Form No. 89081-35

Printed in U.S.A. 3/08
$5.00

Copyright © 2010 Danaher Corporation

All rights reserved.

DISTRIBUTED BY

Form No. 89110-69

ABT Inside cover_2010 3/7/10 10:34 PM Page 1

HANDS-ON-SAFETY TOOL KIT

ARMSTRONG TOOLS WARRANTY PRODUCT SPECIFICATIONS

If any Armstrong Hand Tool (except Torque Products) ever fails to give complete satisfaction, Armstrong products are designed to meet or exceed the appropriate standards set forth by the ANSI (American National Standards
return it to your Armstrong Distributor, and it will be repaired or replaced free of charge. Institute) and adopted by the ASME (American Society of Mechanical Engineers) committee governing the accepted standards for
the hand tool industry in order to ensure quality, consistency, and safety of the products produced by manufacturers. We have also
Armstrong Torque Products are warranted to (1) be free of defects in material and indicated where certain product also conforms to US Government and/or Aviation standards. These standards include but are not
workmanship, and (2) meet out of the box calibration accuracy standards as stated in the limited to the following:
product literature. Accuracy standards for calibration are warranted for 90 days from date of
purchase. Products for which Warranty Repair is requested should be returned, at Buyer's ASME / ANSI B18.15-1985 ASME / ANSI B107.17M-1997
cost, for evaluation to: ASME / ANSI B107.1-2002 ASME / ANSI B107.18M-2003
ASME / ANSI B107.2-2002 ASME / ANSI B107.19-2004
Electronic Torque Wrenches: All other Torque Products: ASME / ANSI B107.4 – 2005 ASME / ANSI B107.20-2004
DTG Torque Repair Angle Repair & Calibration Service, Inc. ASME / ANSI B107.5M-2002 ASME / ANSI B107.21-2005
3000 West Kingsley Road 175 Angle Drive ASME / ANSI B107.8-2003 ASME / ANSI B107.23-2004
Garland, TX 75041 Beckley, West Virginia 25801 ASME / ANSI B107.10-2005 ASME / ANSI B107.28-2005
(304) 253-5729 ASME / ANSI B107.11-2002 ASME / ANSI B107.29 – 2005
ASME / ANSI B107.12-2004 ASME / ANSI B107.33M-2002
Armstrong Torque Products are precision instruments that contain moving parts. These ASME / ANSI B107.13-2003 ASME / ANSI B107.100-2002
components are subject to normal wear through use and replacement thereof is the ASME / ANSI B107.14 – 2004 ASME / ANSI B107.400-2008
responsibility of Buyer. Torque Products should be routinely checked for calibration at an ASME / ANSI B107.16M-1998 ASME / ANSI B107.410-2008
Authorized Repair Center using Armstrong repair parts. ASME / ANSI B107.600-2008

This Warranty shall not apply to Products which have been misused, abused, damaged by SAE AS954E – Wrenches, Hand 12 Point High Strength, Thin Wall
accident or otherwise, repaired by anyone other than an Authorized Repair Center or
modified by anyone other than Danaher Tool Group and is in lieu of all other warranties, Armstrong tools reserves the right to make changes in the design and/ or construction of our tools at any time without prior notice.
whether express, implied or statutory. We also reserve the right to discontinue the manufacture or offering for sale of any tools at any time at our discretion. At Armstrong Industrial Hand Tools, we understand
the importance of safety in the workplace. As part
THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A PARTICULAR PURPOSE Dimensions shown in this catalog and on Armstrongtools.com have been furnished solely as a convenience to our users and are not of our Safety Training Program, we offer a
ARE SPECIFICALLY EXCLUDED. Buyer's sole and exclusive remedy for breach of this Warranty intended to be exact product specifications for any individual article of production.
is, at the option of Danaher Tool Group, repair or replacement of the defective Product. IN
complete kit that includes tools for demonstration
NO EVENT WILL DANAHER TOOL GROUP BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONTACT INFORMATION and helpful tips on the proper identification,
CONSEQUENTIAL OR PUNITIVE DAMAGES ARISING FROM BREACH OF THIS WARRANTY, EVEN IF Armstrong Industrial Tools inspection, selection, usage, maintenance and
DANAHER TOOL GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 14600 York Rd. Suite A storage of your hand tools. The purpose of this
Sparks, MD 21152 Hands-on-Safety Tool Kit is to help toward
General Telephone: 800-688-8949
Fax Number: 800-234-0472
maximizing performance, minimize downtime and
www.armstrongtools.com most important avoiding injury.

KIT Number 98-751

ARMSTRONG TOOLS HISTORY
KIT ITEMS
The Armstrong Bros. Tool Co. was founded in 1890 by four brothers, the sons of to the ground. But the company salvaged and re-conditioned its inventory,
a Scottish immigrant blacksmith. In the beginning, the company manufactured rebuilt the plant, doubled the floor space, and continued to grow. In 1905, Armstrong® Tools
and distributed bicycle parts, together with tools and equipment people used to needing still more space, the brothers purchased property, and built a 100,000
manufacture and repair bicycles. square foot, 3-story brick factory. At this point, the company was still involved • 4 Combination Wrenches (9/16”)
only in the manufacture of tool holders and related machine tool accessory • 3 Ratchets (3/8” Drive)
In 1895, as part of their manufacturing program, the brothers introduced lathe items. • 6 Laser-etched EYE-D Sockets
tool holders. By 1900 this product showed such promise that the company • 1 Impact Locking Extension
started devoting full time to manufacturing. So it was that the company's In 1909, Armstrong introduced a line of drop forged wrenches. From its modest
foundation was built upon the tool holder. These holders replaced the heavy, beginning selling bicycle parts, the company launched into a line expansion
Training Materials
individually forged cutting tools that until then were necessary for lathe work. that's continued to today, over 100 years later, with a product line which includes
With the Armstrong system, a forged permanent shank was used with various over 6,000 items of mechanic's tools, pipe and tubing tools, machine shop • Audio Visual Program • 89081-33
shapes of small, interchangeable cutting tools. As advertised, the Armstrong accessories, and cutting tools. Armstrong Tools has a long heritage of high quality • Safety Presentation • 89081-32
system did indeed save "all forging and 70% of grinding," and by the mid manufacturing, predominantly in the U.S.A. and we will continue that heritage. • Participant Quiz • 89081-06
1900's the use of forged cutting tools in machine shops was virtually unheard of, • Participant Certificate • 89081-07
replaced instead by the Armstrong System of Tool Holders. In December 1994, after 105 years of private ownership by the Armstrong • Hard Hat Stickers • 89081-05
family, the company was acquired by the Danaher Corporation. Danaher's family • Participant Sign-In Sheet • 89081-08
The company's first manufacturing facilities were located in a wooden structure of brands includes Matco Hand Tools, Armstrong Industrial Tools, GearWrench, • Safety Brochure • 89081-30
built across the back of two of the brothers' adjoining yards on Edgewood Ave in Allen Industrial Tools and Hex Keys, K-D Automotive Specialty Tools, Jacobs • Safety CD • 89081-31
Chicago, Illinois. At the same time, they also maintained a store in downtown Chucks, Jobox, Delta among others.
Chicago. In 1900, the brothers decided to devote full time to manufacturing and For more information or to find your
moved operations to a new plant. On April Fools' Day in 1902, that plant burned local distributor, call 800.688.8949.
CONTENTS

1 Tool Storage
2 Master Sets
3 Socket Sets
4 Hand Sockets and Drive Tools
5 Impact and Power Sockets, Accessories and Sets
6 Industrial Wrenches and Sets
7 Torque Tools
8 Screwdrivers and Nut Drivers
9 Pliers and Snips
10 Punches, Chisels, Pry Bars and Hammers
11 C-Clamps and Lifting Eyes (Eye Bolts)
12 General Purpose Tools
13 Pullers and Accessories
14 Work Holding Tools, Cutting Tools and Shop Accessories

APPENDICES
A Master Set Contents

B Replacement Parts

C Reference and Specification Charts

D Merchandising Display Program

E Alphabetical Index

F Product Number Index

ARMSTRONG:
120 CATALOG HIGHLIGHTS
Introducing a new catalog numbering scheme to keep you up to date The latest catalog from Armstrong® Industrial Tools represents
with the latest catalog. As newer catalog versions are released, their many significant enhancements as a result of our unwavering
identifying number will continue to be indexed. commitment to product quality and industrial strength tools and
related accessories.
A FEW HIGHLIGHTS OF THIS CATALOG INCLUDE:
Over 620 new products to provide the unmatched quality, industrial
strength, and breadth of line our industrial and commercial customers
depend on to earn their livings.

THESE PRODUCTS INCLUDE:

1/4" DRIVE RATCHETS, EXTENSIONS, 6 PT. SOCKETS: 1/4" DRIVE 12 PT. IMPACT SOCKETS:
5/32" – 1/4", 4mm – 14mm 9/16" – 2-3/8"
1/4" DRIVE RATCHETS, EXTENSIONS, 12 PT. SOCKETS: 3/8" DRIVE 12 PT. IMPACT SOCKETS:
3/8" – 1-1/2", 9mm – 36mm 5/16" – 1", 8mm – 22mm
3/8" DRIVE RATCHETS, EXTENSIONS, 1/2" DRIVE 6 PT. & 12 PT. IMPACT
12 PT. STANDARD & DEEP SOCKETS: STANDARD & DEEP SOCKETS:
5/16" – 7/8", 9mm – 21mm 3/8" – 1-15/16", 10mm – 36mm
3/8" DRIVE BIT SOCKETS: COMBINATION WRENCHES 6 PT. REGULAR LENGTH:
7/64" – 3/8", 2mm – 10mm 11/16 – 1", 9mm – 25mm
1/2" DRIVE BIT SOCKETS: COMBINATION WRENCHES 12 PT. REGULAR LENGTH:
1/4" – 5/8" 1/4" – 1", 6mm – 25mm*
1/4" DRIVE 6 PT. IMPACT SOCKETS: SOLID SHAFT NUTDRIVERS:
3/16" – 5/8", 4mm – 15mm 3/16" – 1/4", 5mm – 11mm
1/4" DRIVE 6 PT. IMPACT SOCKETS: ASSORTMENT OF LOCKING PLIERS:
1/4" – 1-1/2" 5" – 10"
3/8" DRIVE 6 PT. IMPACT SOCKETS:
*Available in satin and black oxide finishes
5/16" – 3/4", 8mm – 19mm
ARMSTRONG:
NEW PRODUCTS
The many new products that have been added to the Armstrong We gather this valuable feedback and incorporate the most desired
Industrial Tools product line are in response to your needs as a features and quality cues into each new product design. Intense
discriminating professional tool user. We begin by understanding and thorough engineering is followed by production and field
your needs through a process we call VOC (Voice Of Customer). testing to ensure we deliver on the uncompromising quality and
desired benefits you’ve come to know, expect, and demand from
us. Above are a few examples of products that have been
developed and produced using this very process.
INDUSTRY SOLUTIONS:
INDUSTRIAL
It’s not just STRONG. It’s ARMSTRONG.
That’s the credo we live by for Armstrong Industrial Tools. The demanding industrial INDUSTRIAL MAINTENANCE & REPAIR ORGANIZATION (MRO)
and commercial environments of today call for the highest quality, durable, and Maximize equipment uptime and reliability or preventative maintenance
strongest tools we can provide. Whether managing the tool crib at an automotive ELECTRIC AND COMMUNICATION UTILITIES
manufacturing plant, or constructing the towers and transmission lines that keep us Tools high above the ground and far below the surface
connected to one another and deliver data to the many devices we now rely on, or
MINING AND ENERGY RELATED INDUSTRIES
responsibly mining or harnessing the natural resources of the earth, sea, wind, or sun
Rugged environments and extreme weather conditions …
to provide us the energy we need to keep going day after day, we manufacture
COMMERCIAL CONSTRUCTION
Armstrong tools with your specific needs in mind.
Heavy Duty usage where size really does matter
INDUSTRY SOLUTIONS::
MILITARY/DEFENSE
Since 1890 Armstrong has been manufacturing reliable, high quality hand tools, made UNIQUE TOOLS FOR MILITARY APPLICATIONS*
in the USA. Our focus on industrial and military applications brings us the know-how to CUSTOM KITS AND SOLUTIONS*
deliver innovative, high quality tools and solutions. Our commitment to quality is a * Contact your Armstrong distributor or representative for guidelines and more details

foundation to our culture and is part of our DBS business system that is well known
throughout the industry. We have various product and service solutions designed to
meet all of the tool needs for the government and military.
INDUSTRY SOLUTIONS:
CUSTOM TOOLS
ARMSTRONG IS EQUIPPED TO BE YOUR SOLUTION PROVIDER.
Do you have a specific tool need with no solutions on the market? STEP 1 - CONTACT YOUR ARMSTRONG DISTRIBUTOR

If so, Armstrong's Custom Tool Solution program is right for you. Discuss your specific tool requirements and work with us
to ensure your specifications are clearly understood.
We have a team of engineers who will work directly with you to
develop the tool you need at the spec you require. Increase your STEP 2 - PROTOTYPE
We’ll produce a custom tool prototype, and field test it on location
productivity and safety by having the right tool for the job.
to determine if it meets your needs.
* Custom tool request will need to meet certain quantity and specification requirements.
STEP 3 - PRODUCTION
* Please contact your Armstrong distributor or sales representative for more information.
We’ll build and supply your custom tool to order through
your Armstrong distributor.
ARMSTRONG
SAFETY FIRST
Armstrong Tools are often used in hazardous conditions and the • ALWAYS WEAR SAFETY GOGGLES

utmost care and safety must be adhered to when using any tool to • ALWAYS USE THE TOOL IN THE MANNER IT WAS DESIGNED TO BE USED

avoid personal or bodily injury. Below are examples of many • BE SURE TO MAINTAIN AND CLEAN THE TOOL PROPERLY

common safety considerations you should always follow before using • HEED ALL MANUFACTURER WARNINGS AND DISCLAIMERS

any tools. Also please be sure to read any safety or instructional

information that may accompany the tool prior to its use.
ARMSTRONG
WEBSITE UPDATES
Be sure to visit our newly revamped website at • NEW NAVIGATION
www.armstrongtools.com to see the latest news, articles, • E-NEWSLETTER
and new products as soon as they are available. • PROMOTIONAL HIGHLIGHT
• PRINTED LITERATURE REQUEST
 TOOL STORAGE 1
Cabinets
STANDARD SERIES Top Chests
Accessories
Plastic Storage
Metal Boxes
SAFETY Vinyl Rolls
Fully-recessed drawers prevent
inadvertent collisions

ACCESS
Full drawer extension allows
complete access to drawer contents

STRENGTH
Double-wall construction reduces
corner cracking and racking

STRENGTH
Heavy-duty casters maximize
mobility and durability INDUSTRIAL SERIES
ALL the features of the Standard Series, PLUS...

STRENGTH
Heavy-duty ball-bearing slides on all
models offer smooth operation even
under extreme weight loads

STRENGTH
Industrial scratch-resistant finish
resists scratches and wear, even in
the most severe industrial environments

STRENGTH
Unibody design - minimum 18 gauge steel -
maintains squareness and allows for
extra load strength and mobility
 1
Industrial Series

19 Drawer Triple Bay Roller Cabinet 16-790

Tool Storage

Width, Depth, Height, Cubic Drawer Weight, Casters

Inches Inches Inches Inches Bearings Pounds w/Bearings
73.843 24.906 42.078 34,140 Yes 850 6x2
Width, Depth, Height,
Drawer Dimensions Inches Inches Inches
1 Drawer 48.093 22.906 3.906
1 Drawer 16.843 22.906 3.906
6 Drawers 16.843 22.906 1.906
2 Drawers 16.843 22.906 2.906
2 Drawers 16.843 22.906 11.656
3 Drawers 28.625 22.906 1.906
2 Drawers 28.625 22.906 2.906
2 Drawers 28.625 22.906 3.906

Can be used with 16-888

13 Drawer Double Bay Roller Cabinet 16-988

Width, Depth, Height, Cubic Drawer Weight, Casters
Inches Inches Inches Inches Bearings Pounds w/Bearings
54.375 24.906 42.078 24,809 Yes 625 6x2
Width, Depth, Height,
Drawer Dimensions Inches Inches Inches
1 Drawer 48.093 22.906 3.906
3 Drawers 16.843 22.906 1.906
1 Drawer 16.843 22.906 2.906
1 Drawer 16.843 22.906 11.656
3 Drawers 28.625 22.906 1.906
2 Drawers 28.625 22.906 2.906
2 Drawers 28.625 22.906 3.906

Can be used with 16-888

1-1 Always wear eye protection when near tools in use.

 1
Industrial Series

8 Drawer Single Bay Roller Cabinet 16-986

Width, Depth, Height, Cubic Drawer Weight,
Inches Inches Inches Inches Bearings Pounds Casters
33.406 18.500 40.187 12,370 Yes 295 6x2
Width, Depth, Height,
Drawer Dimensions Inches Inches Inches
3 Drawers 28.593 16.718 1.906
2 Drawers 28.593 16.718 2.906
2 Drawers 28.593 16.718 3.906
1 Drawer 28.593 16.718 6.531

Can be used with 16-876

8 Drawer Single Bay Roller Cabinet 16-984

Width, Depth, Height, Cubic Drawer Weight,

Tool Storage
Inches Inches Inches Inches Bearings Pounds Casters
29.687 18.578 41.109 9,701 Yes 270 6x2
Width, Depth, Height,
Drawer Dimensions Inches Inches Inches
4 Drawers 23.500 16.593 1.906
4 Drawers 23.500 16.593 4.312

Can be used with 16-874

1-2
 1
Industrial Series

12 Drawer Top Chest 16-888

Width, Depth, Height, Cubic Drawer Weight,
Inches Inches Inches Inches Bearings Pounds
54.375 24.906 24.562 19,361 Yes 445
Width, Depth, Height,
Drawer Dimensions Inches Inches Inches
4 Drawers 16.843 22.906 1.906
2 Drawers 16.843 22.906 2.906
4 Drawers 28.625 22.906 1.906
2 Drawers 28.625 22.906 2.906
Top 54.250 24.906 4.125

5 Drawer Top Chest 16-876

Width, Depth, Height, Cubic Drawer Weight,
Inches Inches Inches Inches Bearings Pounds
33.406 18.500 21.578 7,430 Yes 218
Width, Depth, Height,
Drawer Dimensions Inches Inches Inches
1 Drawer 28.593 16.718 2.906
Tool Storage

2 Drawers 28.593 16.718 1.906

2 Drawers 28.593 16.718 1.984
Top 33.218 17.750 4.203

5 Drawer Top Chest 16-874

Width, Depth, Height, Cubic Drawer Weight,
Inches Inches Inches Inches Bearings Pounds
29.687 18.578 22.640 5,500 Yes 180
Width, Depth, Height,
Drawer Dimensions Inches Inches Inches
3 Drawer 23.500 16.593 1.906
2 Drawers 23.500 16.593 4.312

1-3 Always wear eye protection when near tools in use.

 1
Industrial Series

3 Drawer Intermediate Chest 16-622

Width, Depth, Height, Cubic Drawer Weight,
Inches Inches Inches Inches Bearings Pounds
33.406 18.500 12.062 3,211 Yes 108
Width, Depth, Height,
Drawer Dimensions Inches Inches Inches
2 Drawers 28.593 16.718 1.906
1 Drawer 28.593 16.718 2.906

8 Drawer Side Cabinet 16-625

Width, Depth, Height, Cubic Drawer Weight,
Inches Inches Inches Inches Bearings Pounds
19.875 24.906 35.312 7,919 Yes 250
Width, Depth, Height,
Drawer Dimensions Inches Inches Inches
1 Drawer 14.625 22.906 6.031
3 Drawers 14.625 22.906 1.906
2 Drawers 14.625 22.906 2.906
2 Drawers 14.625 22.906 3.906

Tool Storage
7 Drawer Side Cabinet 16-626
Width, Depth, Height, Cubic Drawer Weight,
Inches Inches Inches Inches Bearings Pounds
18.500 18.500 34.562 6,972 Yes 180
Width, Depth, Height,
Drawer Dimensions Inches Inches Inches
3 Drawers 13.656 16.500 1.906
2 Drawers 13.656 16.500 2.906
1 Drawer 13.656 16.500 3.906
1 Drawer 13.656 16.500 10.906

1-4
 1
Standard Series

12 Drawer Double Bay Roller Cabinet 16-901

Width, Depth, Height, Cubic Drawer Weight,
Inches Inches Inches Inches Bearings Pounds Casters
40.750 18.000 41.250 15,910 Yes 232 5x2
Width, Depth, Height,
Drawer Dimensions Inches Inches Inches
1 Drawer 36.625 16.375 4.125
1 Drawer 22.375 16.375 2.000
3 Drawers 22.375 16.375 3.125
2 Drawers 22.375 16.375 6.375
1 Drawer 11.750 16.375 2.000
3 Drawers 11.750 16.375 3.125
1 Drawer 11.750 16.375 12.750

12 Drawer Single Bay Roller Cabinet 16-977

Width, Depth, Height, Cubic Drawer Weight,
Tool Storage

Inches Inches Inches Inches Bearings Pounds Casters

26.000 18.000 41.250 10,457 No 145 5x2
Width, Depth, Height,
Drawer Dimensions Inches Inches Inches
4 Drawers 6.750 16.375 2.000
1 Drawer 6.750 16.375 4.125
6 Drawers 22.375 16.375 3.125
1 Drawer 22.375 16.375 6.375

1-5 Always wear eye protection when near tools in use.

 1
Standard Series

9 Drawer Single Bay Roller Cabinet 16-978

Width, Depth, Height, Cubic Drawer Weight,
Inches Inches Inches Inches Bearings Pounds Casters
26.500 18.000 41.250 10,562 No 130 5x2
Width, Depth, Height,
Drawer Dimensions Inches Inches Inches
2 Drawers 10.625 16.375 4.125
2 Drawers 10.625 16.375 3.125
3 Drawers 22.375 16.375 3.125
2 Drawers 22.375 16.375 6.375

7 Drawer Single Bay Roller Cabinet 16-981

Tool Storage
Width, Depth, Height, Cubic Drawer Weight,
Inches Inches Inches Inches Bearings Pounds Casters
26.500 18.000 41.250 10,696 No 125 5x2
Width, Depth, Height,
Drawer Dimensions Inches Inches Inches
1 Drawer 22.375 16.375 4.125
4 Drawers 22.375 16.375 3.125
2 Drawers 22.375 16.375 6.375

1-6
 1
Standard Series

5 Drawer Single Bay Roller Cabinet 16-982

Width, Depth, Height, Cubic Drawer Weight,
Inches Inches Inches Inches Bearings Pounds Casters
26.500 18.000 41.250 11,780 No 112 5x2
Width, Depth, Height,
Drawer Dimensions Inches Inches Inches
4 Drawers 22.375 16.375 3.125
1 Drawer 22.375 16.375 6.375
Panel Area 26.250 17.750 10.625

3 Drawer Single Bay Roller Cabinet 16-980

Width, Depth, Height, Cubic Drawer Weight,
Inches Inches Inches Inches Bearings Pounds Casters
Tool Storage

26.500 18.000 35.500 9,518 No 91 5x2

Width, Depth, Height,
Drawer Dimensions Inches Inches Inches
2 Drawers 22.375 16.375 3.125
1 Drawer 22.375 16.375 6.375
Panel Area 26.250 17.750 10.625

1-7 Always wear eye protection when near tools in use.

 1
Standard Series

11 Drawer Top Chest 16-889

Width, Depth, Height, Cubic Drawer Weight,
Inches Inches Inches Inches Bearings Pounds
40.500 17.500 19.750 10,362 Yes 143
Width, Depth, Height,
Drawer Dimensions Inches Inches Inches
5 Drawers 22.375 16.375 2.000
1 Drawer 22.375 16.375 3.125
4 Drawers 11.750 16.375 2.000
1 Drawer 11.750 16.375 5.250
Top 40.375 17.500 4.460

11 Drawer Top Chest 16-883

Width, Depth, Height, Cubic Drawer Weight,
Inches Inches Inches Inches Bearings Pounds

Tool Storage
40.500 16.000 19.750 9,326 No 110
Width, Depth, Height,
Drawer Dimensions Inches Inches Inches
5 Drawers 22.375 14.625 2.000
1 Drawer 22.375 14.625 3.125
4 Drawers 11.750 14.625 2.000
1 Drawer 11.750 14.625 5.250
Top 40.500 16.000 4.460

1-8
 1
Standard Series

12 Drawer Top Chest 16-881

Width, Depth, Height, Cubic Drawer Weight,
Inches Inches Inches Inches Bearings Pounds
26.000 12.000 19.750 4,335 No 64
Width, Depth, Height,
Drawer Dimensions Inches Inches Inches
9 Drawers 6.750 10.750 2.000
2 Drawers 22.375 10.750 2.000
1 Drawer 22.375 10.750 3.125
Top 26.000 12.000 2.375

10 Drawer Top Chest 16-882

Width, Depth, Height, Cubic Drawer Weight,
Inches Inches Inches Inches Bearings Pounds
26.000 12.000 19.750 4,358 No 60
Width, Depth, Height,
Drawer Dimensions Inches Inches Inches
6 Drawers 6.750 10.750 2.000
Tool Storage

1 Drawer 6.750 10.750 6.375

2 Drawers 22.375 10.750 2.000
1 Drawer 22.375 10.750 3.125
Top 26.000 12.000 2.375

6 Drawer Top Chest 16-880

Width, Depth, Height, Cubic Drawer Weight,
Inches Inches Inches Inches Bearings Pounds
26.000 12.000 15.500 3,467 No 47
Width, Depth, Height,
Drawer Dimensions Inches Inches Inches
3 Drawers 6.750 10.750 2.000
2 Drawers 22.375 10.750 2.000
1 Drawer 22.375 10.750 3.125
Top 26.000 12.000 2.375

1-9 Always wear eye protection when near tools in use.

 1
Standard Series

6 Drawer Side Cabinet 16-611

Width, Depth, Height, Cubic Drawer Weight,
Inches Inches Inches Inches Bearings Pounds
15.750 18.000 35.500 5,649 No 67
Width, Depth, Height,
Drawer Dimensions Inches Inches Inches
1 Drawer 11.750 16.375 4.125
4 Drawers 11.750 16.375 3.125
1 Drawer 11.750 16.375 12.750

4 Drawer Intermediate Chest 16-620

Width, Depth, Height, Cubic Drawer Weight,
Inches Inches Inches Inches Bearings Pounds
26.000 12.000 12.250 1,929 No 31

Tool Storage
Width, Depth, Height,
Drawer Dimensions Inches Inches Inches
4 Drawers 22.375 10.750 2.000

1-10
 1
Hand Boxes

Hand Box 16-605

Width, Depth, Height, Cubic Weight,
Inches Inches Inches Inches Pounds
20.000 8.000 9.000 1,440 11.5

Hand Box 16-607

Width, Depth, Height, Cubic Weight,
Inches Inches Inches Inches Pounds
16.000 7.000 7.500 822 7.0
Tool Storage

PLASTIC STORAGE PRODUCTS

- MOLDED FROM HEAVY-DUTY POLYPROPYLENE s - “V” GROOVE IN LID
• Will not dent or rust • Holds pipes, dowels and similar items in place for sawing
- THREE LEVELS OF STORAGE: TOTE, TOP TRAY AND TUB
• Organizes hand tools, power tools and supplies

Plastic Hand Box 16-602*

Width, Depth, Height, Cubic Weight,
Inches Inches Inches Inches Pounds
20.750 13.500 16.750 4,095 11.5
Width, Depth, Height,
Drawer Dimensions Inches Inches Inches
Top Tray 20.750 13.500 2.500
Middle Tray 20.750 13.500 5.250
Bottom 20.750 13.500 13.500
*Made in Mexico

Plastic Hand Box 16-600*

Width, Depth, Height, Cubic Weight,
Inches Inches Inches Inches Pounds
16.250 9.000 12.500 1,165 6.5
Width, Depth, Height,
Drawer Dimensions Inches Inches Inches
Top Tray 16.000 7.375 2.000
Middle Tray 16.000 7.375 3.000
Bottom 16.000 7.375 7.000
*Made in Mexico

1-11 Always wear eye protection when near tools in use.

 1
Cases and Bars

Steel Cases and Tote Trays

Product Length, Width, Height, Weight,
Number Inches Inches Inches Used for these Tool Sets Pounds
16-601 6.500 3.500 1.250 15-225, 15-230, 15-235, 44-210 0.86
16-604 10.000 5.625 1.500 15-210, 15-215, 15-220, 44-205 1.96
16-606 17.000 5.625 1.250 15-200, 44-200 2.61
16-613 17.000 5.250 3.000 15-205, 15-320, 15-325, 15-330, 15-340,
44-310, 44-315 4.60
16-615 21.500 5.625 3.125 15-310, 44-300 6.21
16-621 14.000 5.750 3.000 15-335, 44-320 4.05
16-623 17.500 3.250 2.125 15-540, 44-525 2.48
16-629 23.000 7.500 4.125 15-510, 15-515, 15-520, 15-525, 15-530,
15-535, 44-510, 44-515, 44-520 7.43
16-635 23.000 7.500 4.125 — 7.76
16-641 31.250 8.000 5.000 15-710, 15-715, 44-710, 15-810 18.52
16-649 11.000 4.000 1.500 15-345, 15-350, 44-325 1.71
16-651 22.750 8.625 8.375 — 15.21
16-653* 22.500 8.500 3.000 — 2.97
16-657 27.500 11.500 5.500 15-700, 15-705, 44-700, 44-705 19.59
16-659 35.000 11.500 5.500 15-800, 15-805 24.94
16-681 9.000 1.625 1.750 — 0.47
16-685 9.500 1.500 3.500 — 0.56
16-691 14.250 1.750 3.500 — 1.09
16-695 19.000 2.250 2.250 — 1.16

*Tote Tray for 16-651 Steel Case. Sold separately.

Tool Storage
Blow Mold Case
Product Length, Width, Height, Weight,
Number Inches Inches Inches Used for these Tool Sets Pounds
16-697 10.000 5.500 1.500 44-380, 15-430 0.46

Socket Bars and Clips

Bars accept clips in all drive sizes and are drilled at each end for easy attachment to
wall, workbench or drawer. Made of heavy gauge steel and bright plated. Clips sold in
standard package of 10 pieces only.
Bars Clips
Product Length, Weight, Product Drive Size, Weight,
Number Inches Pounds Number Inches Pounds
16-831 9.000 0.06 16-841 1/4 0.01
16-832 11.000 0.07 16-843 3/8 0.01
16-834 13.000 0.10 16-845 1/2 0.04
16-835 17.000 0.14 16-847 3/4 0.10

Plastic Socket Bars and Clips

Heavy-duty plastic socket bars accept clips in all drive sizes. Color-coded for use with frac-
tional (red) and metric (blue) sockets. Clips sold in standard package of 15 pieces only.
Bars Clips
Product Length, Weight, Product Drive Size, Weight,
Number Inches Pounds Number Inches Pounds
16-836 Red-Fractional 10.000 0.08 16-844 1/4 0.04
16-837 Blue-Metric 10.000 0.08 16-846 3/8 0.09
16-838 Red-Fractional 15.000 0.12 16-848 1/2 0.17
16-839 Blue-Metric 15.000 0.12

1-12
 1
Vinyl Rolls

Vinyl Rolls
Number of Dimensions, Inches
Product Pockets Width Height Used In These Tool Sets
Wrench Sets
29-472 3 6.500 11.500 28-153
29-474 3 10.000 17.000 28-850, 28-855, 34-850
29-476 4 6.250 6.500 27-563
29-416 4 8.250 13.000 25-692, 27-768, 26-730, 26-700
29-418 5 7.000 8.500 27-939, 70-970
29-420 5 11.250 15.000 27-635, 53-841, 29-273, 30-973, 53-700,
26-730, 28-155, 55-387
29-421 5 9.375 17.500 26-849
29-422 6 11.250 11.000 53-270
29-424 6 15.000 18.000 27-570, 54-571
29-426 7 18.500 10.500 66-843, 28-386
29-428 7 13.250 21.000 26-852
29-430 7 11.750 8.000 25-609, 25-605, 30-609
29-432 7 13.750 18.000 25-671, 25-631, 25-677, 30-631, 25-694,
27-609, 27-708, 53-843
29-434 7 8.000 7.000 52-601, 54-941
29-436 7 14.500 6.500 54-668, 27-885, 28-250
29-438 8 7.375 6.000 25-602
29-440 8 14.375 13.000 27-770
29-442 9 26.000 21.500 54-573
29-444 9 11.375 8.500 27-942
Tool Storage

29-446 9 10.625 7.000 27-937

29-448 9 14.125 13.000 52-630, 52-679
29-450 10 20.000 8.000 52-607, 52-605, 55-386
29-451 10 16.375 13.375 25-667
29-452 10 21.250 17.000 25-637, 25-680, 25-626, 52-671, 52-631,
52-623, 52-677, 27-708, 54-609, 53-273
29-454 10 28.000 26.000 30-635, 26-282
29-456 11 29.000 10.250 66-845, 66-848
29-458 11 22.000 12.500 25-675, 25-696, 53-845
29-460 13 15.000 8.500 25-675, 25-696, 53-845
29-462 13 24.500 13.000 25-613, 30-613
29-464 14 34.500 17.000 27-895
29-466 14 24.250 14.000 52-619, 52-627
29-468 15 24.875 17.000 25-657, 25-642, 25-689, 25-681, 30-644,
52-634, 52-632, 52-684, 52-682, 52-628
29-470 18 33.250 17.000 52-638, 52-686

Punch and Chisel Sets

29-401 19 30.250 14.000 70-550
29-402 19 29.000 14.000 70-567
29-403 27 37.875 14.000 70-568
29-404 12 16.000 8.500 70-565
29-405 10 17.750 11.250 70-552, 70-563
29-406 7 10.750 10.500 70-553, 70-554, 70-557, 70-563
29-407 5 7.625 12.000 70-556, 70-559, 70-560, 70-564

Screwdriver and Nut Driver Sets

29-410 4 11.000 17.000 66-610, 66-618, 66-639
29-411 5 15.000 13.000 66-611, 66-615
29-412 6 15.000 20.000 66-606, 66-608, 66-611, 66-619, 66-640
29-413 7 20.500 13.250 66-614
29-414 7 16.500 20.000 66-626
29-415 8 25.250 17.000 66-604, 66-611, 66-612, 66-620
29-426 7 18.500 10.500 66-843
29-456 11 29.000 10.250 66-845, 66-848
29-472 3 6.500 11.500 66-692

1-13 Always wear eye protection when near tools in use.

 MASTER SETS 2
Ultimate Master Tool Sets
Master Tool Sets
Intermediate Tool Sets
Basic Tool Sets
Add-On Tool Sets

Armstrong Industrial Hand Tools Master Set Program allows professional technicians to choose the set that best meets their unique demands. Armstrong
offers a complete line of fractional and metric sets including single drive size sets and multiple drive size sets that range from 1/4" through 1".
Each master set is designed to include the most popular sizes and innovative new products such as the Armstrong Ratcheting Wrench. Whether it’s the
1,295 piece Ultimate Master Set—the largest set in the industrial market—or a 62 piece Basic Set, each Armstrong set has been developed to help the
professional technician accomplish even the most difficult industrial application quickly and effectively. That’s the Armstrong Performance Difference.
Choice of three groups of tools:
MASTER SETS An extensive and thorough selection of industrial hand tools designed to handle a wide variety of tasks
INTERMEDIATE SETS Offers the professional user the most popular hand tools
BASIC SETS Comprised of the tools required to handle the most basic industrial applications
The add-on sets are comprised of the most popular sockets, wrenches and accessories and are designed to compliment an existing Armstrong set, without
duplication of drive tools.
Each Master Set provides the professional technician with the ability to select the tool storage system that fits their demands. Choose from Industrial Series
tool boxes, Standard Series tool boxes—or you can order only the tools and choose the particular box that best suits your needs. Every Armstrong tool
box is available, including the largest in the industry—the Triple Bay Industrial Series Tool Box.
 2
Ultimate Master Tool Sets
Master Sets

2-1 Always wear eye protection when near tools in use.

 2
Ultimate Master Tool Sets

Set 15-000
1195 Pc. Ultimate Master Set
With Industrial Series Box
1/4", 3/8", 1/2" and 3/4" Drive
With 19 drawer triple bay
roller cabinet 16-790 and 12
drawer top chest 16-888

Set 15-001
1195 Pc. Ultimate Master Set
Tools Only
1/4", 3/8", 1/2" and 3/4" Drive
No Box; Tools Only

Works on fasteners sizes 1/8" through

2-3/8" and 2mm through 50mm.

Contains:
713 Sockets and Accessories
228 Wrenches
33 Pliers and Snips
61 Screwdrivers / Nutdrivers

Master Sets
82 Striking and Struck Tools
75 Miscellaneous Tools
Complete set contents listed in Appendix A.

Not all products are Armstrong branded.

2-2
 2
Master Tool Sets
Master Sets

2-3 Always wear eye protection when near tools in use.

 2
Master Tool Sets

Set 15-005
761 Pc. Master Set
With Industrial Series Box
1/4", 3/8", 1/2" and 3/4" Drive
With 19 drawer triple bay roller cabinet
16-790

Set 15-006
761 Pc. Master Set
Tools Only
1/4", 3/8", 1/2" and 3/4" Drive
No Box; Tools Only

Works on fasteners sizes 1/8" through 2-3/8" and 2mm through 36mm.

Contains:
410 Sockets and Accessories
185 Wrenches
21 Pliers and Snips
39 Screwdrivers / Nutdrivers
40 Striking and Struck Tools
66 Miscellaneous Tools

Master Sets
Complete set contents listed in Appendix A.

2-4
 2
Master Tool Sets
Master Sets

2-5 Always wear eye protection when near tools in use.

 2
Master Tool Sets

Set 15-010
623 Pc. Master Set
With Industrial Series Box
1/4", 3/8", 1/2" and 3/4" Drive
With 13 drawer double bay roller cabinet
16-988

Set 15-011
623 Pc. Master Set
Tools Only
1/4", 3/8", 1/2" and 3/4" Drive

No Box; Tools Only

Works on fasteners sizes 1/8" through

2-3/8" and 2.5mm through 26mm.

Contains:
319 Sockets and Accessories
159 Wrenches
33 Pliers / Snips
32 Screwdrivers / Nutdrivers

Master Sets
38 Striking and Struck Tools
42 Miscellaneous Tools
Complete set contents listed in Appendix A.

SAFETY NOTICE
HAND TOOL SAFETY STARTS WITH QUALITY TOOLS!

HAVING THE “RIGHT” TOOL ALWAYS AVAILABLE HELPS ELIMINATE

TOOL MISUSE!

A CONSTANT TOOL MAINTENANCE AND REPLACEMENT PROGRAM

HELPS AVOID THE USE OF UNSAFE TOOLS.

2-6
 2
Master Tool Sets

Set 15-015
453 Pc. Master Set
With Industrial Series Box
1/4", 3/8", 1/2" and 3/4" Drive
With 8 drawer single bay roller cabinet
16-986 and 9 drawer top chest 16-876

Set 15-016
453 Pc. Master Set
With Standard Series Box
1/4", 3/8", 1/2" and 3/4" Drive
With 7 drawer single bay roller cabinet
16-981 and 10 drawer top chest 16-882

Set 15-017
453 Pc. Master Set Tools Only
1/4", 3/8", 1/2" and 3/4" Drive
No Box; Tools Only

Works on fasteners sizes 1/8" through 2-3/8".

Master Sets

Contains:
220 Sockets and Accessories
97 Wrenches
32 Pliers / Snips
32 Screwdrivers / Nutdrivers
38 Striking and Struck Tools
34 Miscellaneous Tools
Complete set contents listed in Appendix A.

2-7 Always wear eye protection when near tools in use.

 2
Intermediate Tool Sets

Set 15-020
272 Pc. Intermediate Set
With Industrial Series Box
1/4", 3/8", 1/2" and 3/4" Drive
With 8 drawer single bay roller cabinet
16-986

Set 15-021
272 Pc. Intermediate Set
With Standard Series Box
1/4", 3/8", 1/2" and 3/4" Drive
With 12 drawer single bay roller cabinet
16-977

Set 15-022
272 Pc. Intermediate Set
Tools Only
1/4", 3/8", 1/2" and 3/4" Drive
No Box; Tools Only

Master Sets
Works on fasteners sizes 3/16" through 2".

Contains:
122 Sockets and Accessories
55 Wrenches
27 Pliers / Snips
19 Screwdrivers / Nutdrivers
20 Striking and Struck Tools
29 Miscellaneous Tools
Complete set contents listed in Appendix A.

2-8
 2
Basic Tool Sets

Set 15-025
164 Pc. Basic Set
With Industrial Series Box
1/4", 3/8", 1/2" and 3/4" Drive
With 8 drawer single bay roller cabinet
16-984

Set 15-026
164 Pc. Basic Set
With Standard Series Box
1/4", 3/8", 1/2" and 3/4" Drive
With 7 drawer single bay roller cabinet
16-981

Set 15-027
164 Pc. Basic Set
Tools Only
1/4", 3/8", 1/2" and 3/4" Drive
No Box; Tools Only
Master Sets

Works on fasteners sizes 3/16" through 2" .

Contains:
85 Sockets and Accessories
19 Wrenches
10 Pliers / Snips
12 Screwdrivers
19 Striking and Struck Tools
19 Miscellaneous Tools
Complete set contents listed in Appendix A.

2-9 Always wear eye protection when near tools in use.

 2
Master Tool Sets

Set 15-030
406 Pc. Master Set
With Industrial Series Box
3/8", 1/2" and 3/4" Drive
With 8 drawer single bay roller cabinet
16-986 and 9 drawer top chest 16-876

Set 15-031
406 Pc. Master Set
With Standard Series Box
3/8", 1/2" and 3/4" Drive
With 12 drawer single bay roller cabinet
16-977 and 12 drawer top chest 16-881

Set 15-032
406 Pc. Master Set
Tools Only
3/8", 1/2" and 3/4" Drive
No Box; Tools Only

Master Sets
Works on fasteners sizes 1/8" through 2-3/8".

Contains:
171 Sockets and Accessories
92 Wrenches
33 Pliers / Snips
32 Screwdrivers / Nutdrivers
38 Striking and Struck Tools
40 Miscellaneous Tools
Complete set contents listed in Appendix A.

2-10
 2
Intermediate Tool Sets

Set 15-035
248 Pc. Intermediate Set
With Industrial Series Box
3/8", 1/2" and 3/4" Drive
With 8 drawer single bay roller cabinet
16-986

Set 15-036
248 Pc. Intermediate Set
With Standard Series Box
3/8", 1/2" and 3/4" Drive
With 12 drawer single bay roller cabinet
16-977

Set 15-037
248 Pc. Intermediate Set
Tools Only
3/8", 1/2" and 3/4" Drive
No Box; Tools Only
Master Sets

Works on fasteners sizes 1/4" through 2".

Contains:
97 Sockets and Accessories
55 Wrenches
26 Pliers / Snips
19 Screwdrivers / Nutdrivers
19 Striking and Struck Tools
32 Miscellaneous Tools
Complete set contents listed in Appendix A.

2-11 Always wear eye protection when near tools in use.

 2
Basic Tool Sets

Set 15-040
148 Pc. Basic Mechanics Set
With Industrial Series Box
3/8", 1/2" and 3/4" Drive
With 8 drawer single bay roller cabinet
16-984

Set 15-041
148 Pc. Basic Mechanics Set
With Standard Series Box
3/8", 1/2" and 3/4" Drive
With 7 drawer single bay roller cabinet
16-981

Set 15-042
148 Pc. Basic Mechanics Set
Tools Only
3/8", 1/2" and 3/4" Drive
No Box; Tools Only

Works on fasteners sizes 5/16" through 2".

Master Sets
Contains:
70 Sockets and Accessories
19 Wrenches
11 Pliers / Snips
12 Screwdrivers
18 Striking and Struck Tools
18 Miscellaneous Tools
Complete set contents listed in Appendix A.

2-12
 2
Master Tool Sets

Set 15-045
417 Pc. Master Set
With Industrial Series Box
1/4", 3/8" and 1/2" Drive
With 8 drawer single bay roller cabinet
16-984 and 9 drawer top chest 16-874

Set 15-046
417 Pc. Master Mechanics Set
With Standard Series Box
1/4", 3/8" and 1/2" Drive
With 7 drawer single bay roller cabinet
16-981 and 12 drawer top chest 16-881

Set 15-047
417 Pc. Master Mechanics Set
Tools Only
1/4", 3/8" and 1/2" Drive
No Box; Tools Only

Works on fasteners sizes 1/8" through 1-1/2".

Master Sets

Contains:
189 Sockets and Accessories
87 Wrenches
32 Pliers / Snips
32 Screwdrivers / Nutdrivers
36 Striking and Struck Tools
41 Miscellaneous Tools
Complete set contents listed in Appendix A.

2-13 Always wear eye protection when near tools in use.

 2
Intermediate Tool Sets

Set 15-050
227 Pc. Intermediate Set
With Industrial Series Box
1/4", 3/8" and 1/2" Drive
With 9 drawer top chest 16-876

Set 15-051
227 Pc. Intermediate Set
With Standard Series Box
1/4", 3/8" and 1/2" Drive
With 10 drawer top chest 16-882

Set 15-052
227 Pc. Intermediate Set
Tools Only
1/4", 3/8" and 1/2" Drive
No Box; Tools Only

Works on fasteners sizes 1/8" through 1-1/4".

Master Sets
Contains:
102 Sockets and Accessories
48 Wrenches
14 Pliers / Snips
19 Screwdrivers / Nutdrivers
18 Striking and Struck Tools
26 Miscellaneous Tools
Complete set contents listed in Appendix A.

2-14
 2
Basic Tool Sets

Set 15-055
131 Pc. Basic Set
With Industrial Series Box
1/4", 3/8" and 1/2" Drive
With 9 drawer top chest 16-876

Set 15-056
131 Pc. Basic Set
With Standard Series Box
1/4", 3/8" and 1/2" Drive
With 10 drawer top chest 16-882

Set 15-057
131 Pc. Basic Set Tools Only
1/4", 3/8" and 1/2" Drive
No Box; Tools Only

Works on fasteners sizes 3/16" through 1-1/4" .

Contains:
Master Sets

65 Sockets and Accessories

17 Wrenches
9 Pliers / Snips
8 Screwdrivers
16 Striking and Struck Tools
16 Miscellaneous Tools
Complete set contents listed in Appendix A.

2-15 Always wear eye protection when near tools in use.

 2
Intermediate Tool Sets

Set 15-060
163 Pc. Intermediate Set
With Industrial Series Box
3/8" and 1/2" Drive
With 9 drawer top chest 16-876

Set 15-061
163 Pc. Intermediate Set
With Standard Series Box
3/8" and 1/2" Drive
With 10 drawer top chest 16-882

Set 15-062
163 Pc. Intermediate Set Tools Only
3/8" and 1/2" Drive
No Box; Tools Only

Works on fasteners sizes 1/8" through 1-1/4" .

Contains:

Master Sets
76 Sockets and Accessories
27 Wrenches
12 Pliers
12 Screwdrivers
17 Striking and Struck Tools
19 Miscellaneous Tools
Complete set contents listed in Appendix A.

2-16
 2
Basic Tool Sets

Set 15-065
96 Pc. Basic Set With Box
3/8" and 1/2" Drive
With hand box 16-605

Set 15-066
96 Pc. Basic Set Tools Only
3/8" and 1/2" Drive
No Box; Tools Only

Works on fasteners sizes 5/16" through 1-1/4".

Contains:
41 Sockets and Accessories
17 Wrenches
6 Pliers
8 Screwdrivers
15 Striking and Struck Tools
9 Miscellaneous Tools
Complete set contents listed in Appendix A.
Master Sets

2-17 Always wear eye protection when near tools in use.

 2
Basic Tool Sets

Set 15-070
78 Pc. Basic Set With Box
1/2" Drive
With hand box 16-605

Set 15-071
78 Pc. Basic Set Tools Only
1/2" Drive
No Box; Tools Only

Works on fasteners sizes 5/16" through 1-1/4".

Contains:
30 Sockets and Accessories
17 Wrenches
5 Pliers
8 Screwdrivers
9 Striking and Struck Tools
9 Miscellaneous Tools
Complete set contents listed in Appendix A.

Master Sets

2-18
 2
Basic Tool Sets

Set 15-075
62 Pc. Basic Set With Box
3/8" Drive
With hand box 16-605

Set 15-076
62 Pc. Basic Set Tools Only
3/8" Drive
No Box; Tools Only

Works on fasteners sizes 3/8" through 7/8".

Contains:
21 Sockets and Accessories
12 Wrenches
5 Pliers
5 Screwdrivers
10 Striking and Struck Tools
9 Miscellaneous Tools
Complete set contents listed in Appendix A.
Master Sets

2-19 Always wear eye protection when near tools in use.

 2
Small Tool Sets

Set 15-080
131 Pc. Small Tool Set With Box
1/4" Drive
With hand box 16-605

Set 15-081
131 Pc. Small Tool Set Tools Only
1/4" Drive
No Box; Tools Only

Works on fasteners sizes 5/64" through 3/4" .

Contains:
39 Sockets and Accessories
29 Wrenches
14 Pliers / Snips
18 Screwdrivers / Nutdrivers
8 Striking and Struck Tools
23 Miscellaneous Tools
Complete set contents listed in Appendix A.

Master Sets

2-20
 2
Master Tool Sets

Set 15-085
195 Pc. Master Socket and Wrench Set
With Industrial Series Box
1/4", 3/8" and 1/2" Drive
With 9 drawer top chest 16-876

Set 15-086
195 Pc. Master Socket and Wrench Set
With Standard Series Box
1/4", 3/8" and 1/2" Drive
With 10 drawer top chest 16-882

Set 15-087
195 Pc. Master Socket and Wrench Set
Tools Only
1/4", 3/8" and 1/2" Drive
No Box; Tools Only

Works on fasteners sizes 1/8" through 1-1/4".

Master Sets

Contains:
111 Sockets and Accessories
59 Wrenches
1 Plier
11 Nutdrivers
13 Miscellaneous
Complete set contents listed in Appendix A.

2-21 Always wear eye protection when near tools in use.

 2
Heavy Equipment Tool Sets

Set 15-090
71 Pc. Heavy Equipment Set
With Industrial Series Box
3/4" and 1" Drive
With 8 drawer single bay roller cabinet
16-986

Set 15-091
71 Pc. Heavy Equipment Set
Tools Only
3/4" and 1" Drive
No Box; Tools Only

Works on fasteners sizes 1" through 3-1/2".

Contains:
46 Sockets and Accessories
16 Wrenches
7 Striking and Struck Tools
2 Miscellaneous Tools
Complete set contents listed in Appendix A.

Master Sets

2-22
 2
Heavy Equipment Tool Sets

Set 15-095
94 Pc. Heavy Equipment Set
With Industrial Series Box
3/8", 1/2" and 3/4" Drive
With 8 drawer top chest 16-874

Set 15-096
94 Pc. Heavy Equipment Set
With Standard Series Box
3/8", 1/2" and 3/4" Drive
With 6 drawer top chest 16-880

Set 15-097
94 Pc. Heavy Equipment Set
Tools Only
3/8", 1/2" and 3/4" Drive
No Box; Tools Only

Works on fasteners sizes 1/4" through 2-1/4".

Contains:
Master Sets

52 Sockets and Accessories

21 Wrenches
5 Pliers
3 Screwdrivers
11 Striking and Struck Tools
2 Miscellaneous Tools
Complete set contents listed in Appendix A.

2-23 Always wear eye protection when near tools in use.

 2
Add-on Tool Sets

Set 44-000
111 Pc. Metric Add-on Set
With Industrial Series Box
1/4", 3/8" and 1/2" Drive
With 3 drawer intermediate chest 16-622

Set 44-001
111 Pc. Metric Add-on Set
With Standard Series Box
1/4", 3/8" and 1/2" Drive
With 4 drawer intermediate chest 16-620

Set 44-002
111 Pc. Metric Add-on Set
Tools Only
1/4", 3/8" and 1/2" Drive
No Box; Tools Only

Works on fasteners sizes 4mm through 26mm .

Contains:

Master Sets
84 Sockets and Accessories
18 Wrenches
9 Hex Keys
Complete set contents listed in Appendix A.

2-24
 2
Intermediate Tool Sets

Set 44-005
248 Pc. Metric Intermediate Set
With Industrial Series Box
1/4", 3/8", 1/2" and 3/4" Drive
With 8 drawer single bay roller cabinet
16-986

Set 44-006
248 Pc. Metric Intermediate Set
With Standard Series Box
1/4", 3/8", 1/2" and 3/4" Drive
With 7 drawer single bay roller cabinet
16-981

Set 44-007
248 Pc. Metric Intermediate Set
Tools Only
1/4", 3/8", 1/2" and 3/4" Drive
No Box; Tools Only
Master Sets

Works on fasteners sizes 4mm through 46mm.

Contains:
110 Sockets and Accessories
45 Wrenches
28 Pliers / Snips
19 Screwdrivers / Nutdrivers
19 Striking and Struck Tools
27 Miscellaneous Tools
Complete set contents listed in Appendix A.

2-25 Always wear eye protection when near tools in use.

 2
Master Tool Sets

Set 44-010
355 Pc. Metric Master Set
With Industrial Series Box
1/4", 3/8" and 1/2" Drive
With 8 drawer single bay roller cabinet
16-986 and 9 drawer top chest 16-876

Set 44-011
355 Pc. Metric Master Set
With Standard Series Box
1/4", 3/8" and 1/2" Drive
With 7 drawer single bay roller cabinet
16-981 and 10 drawer top chest 16-882

Set 44-012
355 Pc. Metric Master Set
Tools Only
1/4", 3/8" and 1/2" Drive
No Box; Tools Only

Works on fasteners sizes 2.5mm through

Master Sets
36mm.
Contains:
156 Sockets and Accessories
66 Wrenches
32 Pliers / Snips
34 Screwdrivers / Nutdrivers
36 Striking and Struck Tools
31 Miscellaneous Tools
Complete set contents listed in Appendix A.

2-26
 2
Intermediate Tool Sets

Set 44-015
229 Pc. Metric Intermediate Set
With Industrial Series Box
1/4", 3/8" and 1/2" Drive
With 9 drawer top chest 16-876

Set 44-016
229 Pc. Metric Intermediate Set
With Standard Series Box
1/4", 3/8" and 1/2" Drive
With 7 drawer single bay roller cabinet
16-982

Set 44-017
229 Pc. Metric Intermediate Set
Tools Only
1/4", 3/8" and 1/2" Drive
No Box; Tools Only

Works on fasteners sizes 4mm through 26mm.

Master Sets

Contains:
104 Sockets and Accessories
52 Wrenches
16 Pliers / Snips
19 Screwdrivers / Nutdrivers
18 Striking and Struck Tools
20 Miscellaneous Tools
Complete set contents listed in Appendix A.

2-27 Always wear eye protection when near tools in use.

 2
Basic Tool Sets

Set 44-020
138 Pc. Metric Basic Set
With Industrial Series Box
1/4", 3/8" and 1/2" Drive
With 9 drawer top chest 16-876

Set 44-021
138 Pc. Metric Basic Set
With Standard Series Box
1/4", 3/8" and 1/2" Drive
With 7 drawer single bay roller cabinet
16-982

Set 44-022
138 Pc. Metric Basic Set
Tools Only
1/4", 3/8" and 1/2" Drive
No Box; Tools Only

Works on fasteners sizes 4mm through 26mm.

Master Sets
Contains:
71 Sockets and Accessories
17 Wrenches
10 Pliers
8 Screwdrivers
15 Striking and Struck Tools
17 Miscellaneous Tools
Complete set contents listed in Appendix A.

2-28
 2
Intermediate Tool Sets

Set 44-025
158 Pc. Metric Intermediate Set
With Industrial Series Box
3/8" and 1/2" Drive
With 9 drawer top chest 16-876

Set 44-026
158 Pc. Metric Intermediate Set
With Standard Series Box
3/8" and 1/2" Drive
With 7 drawer single bay roller cabinet
16-982

Set 44-027
158 Pc. Metric Intermediate Set
Tools Only
3/8" and 1/2" Drive
No Box; Tools Only

Works on fasteners sizes 4mm through 46mm.

Master Sets

Contains:
74 Sockets and Accessories
27 Wrenches
12 Pliers / Snips
12 Screwdrivers
17 Striking and Struck Tools
16 Miscellaneous Tools
Complete set contents listed in Appendix A.

2-29 Always wear eye protection when near tools in use.

 2
Basic Tool Sets

Set 44-030
99 Pc. Metric Basic Set With Box
3/8" and 1/2" Drive
With hand box 16-605

Set 44-031
99 Pc. Metric Basic Set Tools Only
3/8" and 1/2" Drive
No Box; Tools Only

Works on fasteners sizes 6mm through 26mm.

Contains:
42 Sockets and Accessories
17 Wrenches
6 Pliers / Snips
8 Screwdrivers
15 Striking and Struck Tools
11 Miscellaneous Tools
Complete set contents listed in Appendix A.

Master Sets

2-30
 2
Basic Tool Sets

Set 44-035
77 Pc. Metric Basic Set With Box
1/2" Drive
With hand box 16-605

Set 44-036
77 Pc. Metric Basic Set Tools Only
1/2" Drive
No Box; Tools Only

Works on fasteners sizes 7mm through 26mm.

Contains:
31 Sockets and Accessories
17 Wrenches
5 Pliers
7 Screwdrivers
10 Striking and Struck Tools
7 Miscellaneous Tools
Complete set contents listed in Appendix A.
Master Sets

2-31 Always wear eye protection when near tools in use.

 2
Basic Tool Sets

Set 44-040
67 Pc. Metric Basic Set With Box
3/8" Drive
With hand box 16-605

Set 44-041
67 Pc. Metric Basic Set Tools Only
3/8" Drive
No Box; Tools Only

Works on fasteners sizes 7mm through 19mm.

Contains:
29 Sockets and Accessories
11 Wrenches
5 Pliers
5 Screwdrivers
10 Striking and Struck Tools
7 Miscellaneous Tools
Complete set contents listed in Appendix A.

Master Sets

2-32
 2
Basic Tool Sets

Set 44-045
100 Pc. Metric Heavy Equipment Set
With Industrial Series Box
3/8", 1/2" and 3/4" Drive
With 8 drawer top chest 16-874

Set 44-046
100 Pc. Metric Heavy Equipment Set
With Standard Series Box
3/8", 1/2" and 3/4" Drive
With 6 drawer top chest 16-880

Set 44-047
100 Pc. Metric Heavy Equipment Set
Tools Only
3/8", 1/2" and 3/4" Drive
No Box; Tools Only

Works on fasteners sizes 7mm through 60mm.

Contains:
Master Sets

56 Sockets and Accessories

24 Wrenches
5 Pliers
3 Screwdrivers
10 Striking and Struck Tools
2 Miscellaneous Tools
Complete set contents listed in Appendix A.

2-33 Always wear eye protection when near tools in use.

 SOCKET SETS 3
Fractional Sets 1/4” to 1” Drive,
Various Point Openings
Metric Sets 1/4” to 3/4” Drive,
Various Point Openings
Hex Driver, Torx® Driver and
Screwdriver Socket Sets
Universal Socket Sets
Crowfoot Wrench Sets
Flarenut Crowfoot Wrench Sets

ACCESS
Wide variety of sets are available
to fit the needs of any job

STRENGTH
Complete offering of sets with
heavy duty drive tools and
accessories that get the job done

ACCESS
Sets come with heavy duty box or
clips and rails for protection, organization,
and easy identification

SPEED
markings on 1/4” through 3/4” sets,
optimize size identification, and provide SAE /
Metric differentiation

ACCESS
Also available: crowfoot wrench sets, hex bit
driver, screwdriver and universal sets
 3
1/4" Drive

Set 15-200
53 Pc. 6 and 8 Point 1/4" Drive Socket Set
Contents: 42 Sockets, 10 Drive Tools, 1 Pliers.
In Case 16-606. Approximate Weight, 6.27 lbs.

6-pt. Std. Length Sockets Hex Driver Sockets

Product Opening, Product Opening,
Number Inches Number Inches
10-004 1/8 10-705 5/64
10-005 5/32 10-706 3/32
10-006 3/16 10-707 7/64
10-007 7/32 10-708 1/8
10-008 1/4 10-709 9/64
10-009 9/32 10-710 5/32
10-010 5/16 10-711 3/16
10-011 11/32 10-712 7/32
10-012 3/8 10-713 1/4
10-014 7/16 10-714 5/16
1/4" Drive

10-016 1/2
10-018 9/16 Screwdriver Sockets
Product Opening,
6-pt. Deep Sockets Number Inches/Phillips
Product Opening, 10-801 3/16 x 1/32
Number Inches 10-802 1/4 x 1/32
10-204 1/8 10-821 #1
Socket Sets

10-205 5/32 10-822 #2

10-206 3/16 10-823 #3
10-207 7/32
10-208 1/4 Drive Tools:
10-209 9/32 Product
10-210 5/16 Number Description
10-211 11/32 10-918 Breaker Bar, 1/4" Dr, 5-3/4"
10-212 3/8 10-921 Extension, 1/4" Dr, 2"
10-214 7/16 10-922 Extension, 1/4" Dr, 4"
10-216 1/2 10-923 Extension, 1/4" Dr, 6"
10-218 9/16 10-929 Flex Extension, 1/4" Dr, 6"
10-935 Speeder, 1/4" Dr
8-pt. Std. Length Sockets 10-938 T-Handle, 1/4" Dr
Product Opening, 10-943 Plastic Handle Driver,
Number Inches 1/4" Dr, 6"
10-408* 1/4 10-947 Universal Joint, 1/4" Dr
10-410 5/16 10-972 Ratchet, 1/4" Dr, 5-9/32"
10-412 3/8 67-717 Pliers, 5" Angle Nose
*4-pt. Std. Length Sockets Ignition

3-1 Always wear eye protection when near tools in use.

 3
1/4" Drive

Set 15-205
37 Pc. 6 and 8 Point 1/4" Drive Socket Set
Contents: 28 Sockets, 9 Drive Tools. In Case 16-613.
Approximate Weight, 4.07 lbs.
6-pt. Std. Length Sockets Screwdriver Sockets
Product Opening, Product Opening,
Number Inches Number Inches
10-006 3/16 10-801 3/16 x 1/32
10-007 7/32 10-802 1/4 x 1/32
10-008 1/4 10-821 #1
10-009 9/32 10-822 #2
10-010 5/16 10-823 #3
10-011 11/32
10-012 3/8 Drive Tools:
10-014 7/16 Product
10-016 1/2 Number Description
10-018 9/16 10-918 Breaker Bar, 1/4" Dr, 5-3/4"

Socket Sets
10-921 Extension, 1/4" Dr, 2"
6-pt. Deep Sockets 10-922 Extension, 1/4” Dr, 3-1/2
Product Opening, 10-923 Extension, 1/4" Dr, 6"
Number Inches 10-929 Flex Extension,1/4" Dr, 6"
10-206 3/16 10-938 T-Handle, 1/4" Dr
10-207 7/32 10-943 Plastic Handle Driver,
10-208 1/4 1/4" Dr, 6"
10-209 9/32 10-947 Universal Joint, 1/4" Dr
10-210 5/16 10-972 Ratchet, 1/4" Dr, 5-9/32"
10-211 11/32
10-212 3/8
10-214 7/16
10-216 1/2
10-218 9/16

1/4" Drive
8-pt. Std. Length Sockets
Product Opening,
Number Inches
10-408* 1/4
10-410 5/16
10-412 3/8
*4-pt. Std. Length Sockets

3-2
 3
1/4" Drive

Set 15-210
25 Pc. 12 Point 1/4" Drive Socket Set
Contents: 20 Sockets, 5 Drive Tools. In Case 16-604.
Approximate Weight, 3.54 lbs.
12-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number Inches Number Description
10-106 3/16 10-921 Extension, 1/4" Dr, 2"
10-107 7/32 10-923 Extension 1/4" Dr. 6"
10-108 1/4 10-943 Plastic Handle Driver,
10-109 9/32 1/4" Dr, 6"
10-110 5/16 10-947 Universal Joint, 1/4" Dr
10-111 11/32 10-972 Ratchet, 1/4" Dr, 5-9/32"
10-112 3/8
10-114 7/16
10-116 1/2
10-118 9/16
1/4" Drive

12-pt. Deep Sockets

Product Opening,
Number Inches
10-306 3/16
10-307 7/32
10-308 1/4
10-309 9/32
Socket Sets

10-310 5/16
10-311 11/32
10-312 3/8
10-314 7/16
10-316 1/2
10-318 9/16

3-3 Always wear eye protection when near tools in use.

 3
1/4" Drive

Set 15-215
25 Pc. 6 Point 1/4" Drive Socket Set
Contents: 20 Sockets, 5 Drive Tools. In Case 16-604. Approximate
Weight, 3.54 lbs.
6-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number Inches Number Description
10-006 3/16 10-921 Extension, 1/4" Dr, 2"
10-007 7/32 10-923 Extension, 1/4" Dr, 6"
10-008 1/4 10-943 Plastic Handle Driver,
10-009 9/32 1/4" Dr, 6"
10-010 5/16 10-947 Universal Joint, 1/4" Dr
10-011 11/32 10-972 Ratchet, 1/4" Dr, 5-9/32"
10-012 3/8
10-014 7/16
10-016 1/2
10-018 9/16

Socket Sets
6-pt. Deep Sockets
Product Opening,
Number Inches
10-206 3/16
10-207 7/32
10-208 1/4
10-209 9/32
10-210 5/16
10-211 11/32
10-212 3/8
10-214 7/16
10-216 1/2
10-218 9/16

1/4" Drive

3-4
 3
1/4" Drive

Set 15-216
25 Pc. 6 Point 1/4" Drive Socket Set with
Armstrong Maxx Ratchet
Contents: 20 Sockets, 5 Drive Tools. In Case 16-604. Approximate
Weight, 3.54 lbs.
6-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number Inches Number Description
10-006 3/16 10-921 Extension, 1/4" Dr, 2"
10-007 7/32 10-923 Extension, 1/4" Dr, 6"
10-008 1/4 10-943 Plastic Handle Driver,
10-009 9/32 1/4" Dr, 6"
10-010 5/16 10-947 Universal Joint, 1/4" Dr
10-011 11/32 10-992 Armstrong Maxx Ratchet,
10-012 3/8 1/4" Dr
10-014 7/16
10-016 1/2
10-018 9/16
1/4" Drive

6-pt. Deep Sockets

Product Opening,
Number Inches
10-206 3/16
10-207 7/32
10-208 1/4
Socket Sets

10-209 9/32
10-210 5/16
10-211 11/32
10-212 3/8
10-214 7/16
10-216 1/2
10-218 9/16

Set 15-248A
21 Pc. 6 Point 1/4" Drive Socket Set
Contents: 16 Sockets, 5 Drive Tools. In Case.
Approximate Weight, 1.75 lbs.
6-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number Inches Number Description
10-008A 1/4 10-919A Extension, 1/4" Dr, 1-1/2"
10-009A 9/32 10-923A Extension, 1/4" Dr, 6"
10-010A 5/16 10-947A Universal Joint, 1/4" Dr
10-011A 11/32 10-944 Spinner Handle, 1/4" Dr
10-012A 3/8 10-967A Quick Release Ratchet,
10-014A 7/16 1/4" Dr
10-016A 1/2
6-pt. Deep Sockets
Product Opening,
Number Inches
10-206A 3/16
10-207A 7/32
10-208A 1/4
10-209A 9/32
10-210A 5/16
10-211A 11/32
10-212A 3/8
10-214A 7/16
10-216A 1/2

3-5 Always wear eye protection when near tools in use.

 3
1/4" Drive

Set 15-220
19 Pc. 6 and 8 Point 1/4" Drive Socket Set
Contents: 13 Sockets, 6 Drive Tools. In Case 16-604.
Approximate Weight, 2.91 lbs.
6-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number Inches Number Description
10-006 3/16 10-918 Breaker Bar, 1/4" Dr, 5-3/4"
10-007 7/32 10-921 Extension, 1/4" Dr, 2"
10-008 1/4 10-923 Extension, 1/4" Dr, 6"
10-009 9/32 10-943 Plastic Handle Driver,
10-010 5/16 1/4" Dr, 6"
10-011 11/32 10-947 Universal Joint, 1/4" Dr
10-012 3/8 10-972 Ratchet, 1/4" Dr, 5-9/32"
10-014 7/16
10-016 1/2
10-018 9/16

Socket Sets
8-pt. Std. Length Sockets
Product Opening,
Number Inches
10-408* 1/4
10-410 5/16
10-412 3/8
*4-pt. Std. Length Sockets

Set 15-225
15 Pc. 6 Point 1/4" Drive Socket Set

1/4" Drive
Contents: 10 Sockets, 5 Drive Tools. In Case 16-601.
Approximate Weight, 1.82 lbs.

6-pt. Std. Length Sockets Drive Tools:

Product Opening, Product
Number Inches Number Description
10-006 3/16 10-921 Extension, 1/4" Dr, 2"
10-007 7/32 10-923 Extension, 1/4" Dr, 6"
10-008 1/4 10-943 Plastic Handle Driver,
10-009 9/32 1/4" Dr, 6"
10-010 5/16 10-947 Universal Joint, 1/4" Dr
10-011 11/32 10-972 Ratchet, 1/4" Dr, 5-9/32"
10-012 3/8
10-014 7/16
10-016 1/2
10-018 9/16

3-6
 3
1/4" Drive

Set 15-246A
13 Pc. 6 Point 1/4" Drive Socket Set
Contents: 9 Sockets, 4 Drive Tools. In Case.
Approximate Weight, 1.75 lbs.
6-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number Inches Number Description
10-006A 3/16 10-919A Extension, 1/4" Dr, 1-1/2"
10-007A 7/32 10-923A Extension, 1/4" Dr, 6"
10-008A 1/4 10-944 Spinner Handle, 1/4" Dr
10-009A 9/32 10-967A Quick Release Ratchet,
10-010A 5/16 1/4" Dr
10-011A 11/32
10-012A 3/8
10-014A 7/16
10-016A 1/2
1/4" Drive

Set 15-247A
13 Pc. 6 Point 1/4" Drive Socket Set
Contents: 9 Sockets, 4 Drive Tools. In Case.
Socket Sets

Approximate Weight, 1.75 lbs.

6-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number Inches Number Description
10-006A 3/16 10-919A Extension, 1/4" Dr, 1-1/2"
10-007A 7/32 10-923A Extension, 1/4" Dr, 6"
10-008A 1/4 10-944 Spinner Handle, 1/4" Dr
10-009A 9/32 10-915A Round Head Ratchet,
10-010A 5/16 1/4" Dr
10-011A 11/32
10-012A 3/8
10-014A 7/16
10-016A 1/2

3-7 Always wear eye protection when near tools in use.

 3
1/4" Drive

Set 15-230
12 Pc. 12 Point 1/4" Drive Socket Set
Contents: 10 Sockets, 2 Drive Tools. In Case 16-601.
Approximate Weight, 1.71 lbs.
12-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number Inches Number Description
10-106 3/16 10-943 Plastic Handle Driver,
10-107 7/32 1/4" Dr, 6"
10-108 1/4 10-972 Ratchet, 1/4" Dr, 5-9/32"
10-109 9/32
10-110 5/16
10-111 11/32
10-112 3/8
10-114 7/16
10-116 1/2
10-118 9/16

Socket Sets
Set 15-235
12 Pc. 6 Point 1/4" Drive Socket Set
Contents: 10 Sockets, 2 Drive Tools. In Case 16-601.
Approximate Weight, 1.71 lbs.
6-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number Inches Number Description
10-006 3/16 10-943 Plastic Handle Driver,

1/4" Drive
10-007 7/32 1/4" Dr, 6"
10-008 1/4 10-972 Ratchet, 1/4" Dr, 5-9/32"
10-009 9/32
10-010 5/16
10-011 11/32
10-012 3/8
10-014 7/16
10-016 1/2
10-018 9/16

3-8
 3
1/4" Drive

Set 15-240
10 Pc. 12 Point 1/4" Drive Socket Set
Contents: 10 Sockets in cardboard box. Includes Socket Bar 16-831
and (10) Socket Clips 16-841. Approximate Weight, 0.53 lbs.
12-pt. Std. Length Sockets
Product Opening, Product Opening, Product Opening,
Number Inches Number Inches Number Inches
10-106 3/16 10-110 5/16 10-116 1/2
10-107 7/32 10-111 11/32 10-118 9/16
10-108 1/4 10-112 3/8
10-109 9/32 10-114 7/16

Set 15-245
1/4" Drive

10 Pc. 6 Point 1/4" Drive Socket Set

Contents: 10 Sockets in cardboard box. Includes Socket Bar 16-831
and (10) Socket Clips 16-841. Approximate Weight, 0.55 lbs.
6-pt. Std. Length Sockets
Product Opening, Product Opening, Product Opening,
Number Inches Number Inches Number Inches
Socket Sets

10-006 3/16 10-010 5/16 10-016 1/2

10-007 7/32 10-011 11/32 10-018 9/16
10-008 1/4 10-012 3/8
10-009 9/32 10-014 7/16

Set 15-249A
10 Pc. 6 Point 1/4" Drive Socket Set
Contents: 10 Sockets in cardboard box. Includes Socket Bar
and Socket Clips. Approximate Weight, 0.75 lbs.
6-pt. Std. Length Sockets
Product Opening, Product Opening, Product Opening,
Number Inches Number Inches Number Inches
10-005A 5/32 10-009A 9/32 10-014A 7/16
10-006A 3/16 10-010A 5/16 10-016A 1/2
10-007A 7/32 10-011A 11/32
10-008A 1/4 10-012A 3/8

3-9 Always wear eye protection when near tools in use.

 3
1/4" Drive

Set 15-250
10 Pc. 12 Point 1/4" Drive Deep Socket Set
Contents: 10 Sockets in cardboard box. Includes Socket Bar 16-831
and (10) Socket Clips 16-841. Approximate Weight, 0.87 lbs.
12-pt. Deep Sockets
Product Opening, Product Opening, Product Opening.
Number Inches Number Inches Number Inches
10-306 3/16 10-310 5/16 10-316 1/2
10-307 7/32 10-311 11/32 10-318 9/16
10-308 1/4 10-312 3/8
10-309 9/32 10-314 7/16

Set 15-255

Socket Sets
10 Pc. 6 Point 1/4" Drive Deep Socket Set
Contents: 10 Sockets in cardboard box. Includes Socket Bar
16-831 and (10) Socket Clips 16-841. Approximate Weight, 0.88 lbs
6-pt. Deep Sockets
Product Opening, Product Opening, Product Opening,
Number Inches Number Inches Number Inches
10-206 3/16 10-210 5/16 10-216 1/2
10-207 7/32 10-211 11/32 10-218 9/16
10-208 1/4 10-212 3/8
10-209 9/32 10-214 7/16

1/4" Drive

3-10
 3
1/4" Drive

Set 15-260
10 Pc. 1/4" Drive Extra Long Hex Driver Socket Set
Contents: 10 Hex Drivers in cardboard box. Includes Socket Bar
16-831 and (10) Socket Clips 16-841. Approximate Weight, 0.97 lbs.
Hex Driver Sockets with Extra Long Bits
Product Hex Size, Product Hex Size, Product Hex Size,
Number Inches Number Inches Number Inches
10-745 5/64 10-749 9/64 10-753 1/4
10-746 3/32 10-750 5/32 10-754 5/16
10-747 7/64 10-751 3/16
10-748 1/8 10-752 7/32

Set 15-265
1/4" Drive

11 Pc. 1/4" Drive Hex Driver Socket Set

Contents: 11 Hex Drivers in cardboard box. Includes Socket Bar
16-831 and (20) Socket Clips 16-841. Approximate Weight, 0.60 lbs.
Hex Driver Sockets
Product Hex Size, Product Hex Size, Product Hex Size,
Number Inches Number Inches Number Inches
Socket Sets

10-704 1/16 10-708 1/8 10-712 7/32

10-705 5/64 10-709 9/64 10-713 1/4
10-706 3/32 10-710 5/32 10-714 5/16
10-707 7/64 10-711 3/16

Set 15-270
6 Pc. 1/4" Drive Torx® Driver Socket Set
Contents: 6 Torx Drivers in cardboard box. Includes Socket Bar
16-831 and (10) Socket Clips 16-841. Approximate Weight, 0.40 lbs.
Tor x Driver Sockets
Product Tor x Product Tor x Product Tor x
Number Size Number Size Number Size
10-870 T10 10-874 T20 10-878 T27
10-872 T15 10-876 T25 10-880 T30
TORX® is the registered trademark of Acument Intellectual Properties, LLC.

3-11 Always wear eye protection when near tools in use.

 3
1/4" Drive

Set 44-200 METRIC

43 Pc. 6 Point 1/4" Drive Socket Set
Contents: 35 Sockets, 8 Drive Tools. In Case 16-606.
Approximate Weight, 5.57 lbs. (2,529 g)
6-pt. Std. Length Sockets Hex Driver Sockets
Product Opening, Product Opening,
Number mm Number mm
37-004 4 37-703 2
37-081 4.5 37-704 2.5
37-005 5 37-705 3
37-083 5.5 37-707 4
37-006 6 37-709 5
37-007 7 37-711 6
37-008 8 37-713 8
37-009 9
37-010 10 Drive Tools:
37-011 11 Product
37-012 12

Socket Sets
Number Description
37-013 13 10-918 Breaker Bar, 1/4" Dr, 5-3/4"
37-014 14 10-921 Extension, 1/4" Dr, 2"
37-015 15 10-923 Extension, 1/4" Dr, 6"
10-929 Flex Extension, 1/4" Dr, 6"
6-pt. Deep Sockets 10-938 T-Handle, 1/4" Dr
Product Opening, 10-943 Plastic Handle Driver,
Number mm 1/4" Dr, 6"
37-204 4 10-947 Universal Joint, 1/4" Dr
37-281 4.5 10-972 Ratchet, 1/4" Dr, 5-9/32"
37-205 5
37-283 5.5
37-206 6
37-207 7

1/4" Drive
37-208 8
37-209 9
37-210 10
37-211 11
37-212 12
37-213 13
37-214 14
37-215 15

3-12
 3
1/4" Drive

Set 44-205 METRIC

29 Pc. 6 Point 1/4" Drive Socket Set
Contents: 24 Sockets, 5 Drive Tools. In Case 16-604.
Approximate Weight, 4.07 lbs. (1,848 g)
6-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number mm Number Description
37-004 4 10-921 Extension, 1/4" Dr, 2"
37-005 5 10-923 Extension, 1/4" Dr, 6"
37-083 5.5 10-943 Plastic Handle Driver,
37-006 6 1/4" Dr, 6"
37-007 7 10-947 Universal Joint, 1/4" Dr
37-008 8 10-972 Ratchet, 1/4" Dr, 5-9/32"
37-009 9
37-010 10
37-011 11
37-012 12
37-013 13
37-014 14
1/4" Drive

6-pt. Deep Sockets

Product Opening,
Number mm
37-204 4
37-205 5
37-283 5.5
Socket Sets

37-206 6
37-207 7
37-208 8
37-209 9
37-210 10
37-211 11
37-212 12
37-213 13
37-214 14

3-13 Always wear eye protection when near tools in use.

 3
1/4" Drive

Set 44-321A METRIC

21 Pc. 6 Point 1/4" Drive Socket Set
Contents: 16 Sockets, 5 Drive Tools. In Case.
Approximate Weight, 1.75 lbs. (1,633 g)
6-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number mm Number Description
37-004A 4 10-919A Extension, 1/4" Dr, 1-1/2"
37-005A 5 10-923A Extension, 1/4" Dr, 6"
37-006A 6 10-944 Spinner Handle, 1/4" Dr
37-007A 7 10-947A Universal Joint, 1/4" Dr
37-008A 8 10-967A Quick Release Ratchet,
37-009A 9 1/4" Dr
37-010A 10
37-011A 11
37-012A 12

Socket Sets
6-pt. Deep Sockets
Product Opening,
Number mm
37-206A 6
37-207A 7
37-208A 8
37-209A 9
37-210A 10
37-211A 11
37-212A 12

1/4" Drive

3-14
 3
1/4" Drive

Set 44-210 METRIC

17 Pc. 6 Point 1/4" Drive Socket Set
Contents: 12 Sockets, 5 Drive Tools. In Case 16-601.
Approximate Weight, 1.80 lbs. (817 g)
6-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number mm Number Description
37-004 4 10-921 Extension, 1/4" Dr, 2"
37-005 5 10-923 Extension, 1/4" Dr, 6"
37-083 5.5 10-943 Plastic Handle Driver,
37-006 6 1/4" Dr, 6"
37-007 7 10-947 Universal Joint, 1/4" Dr
37-008 8 10-972 Ratchet, 1/4" Dr, 5-9/32"
37-009 9
37-010 10
37-011 11
37-012 12
37-013 13
1/4" Drive

37-014 14
Socket Sets

Set 44-323A METRIC

14 Pc. 6 Point 1/4" Drive Socket Set
Contents: 10 Sockets, 4 Drive Tools. In Case.
Approximate Weight, 1.21 lbs. (1,588 g)
6-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number mm Number Description
37-004A 4 10-919A Extension, 1/4" Dr, 1-1/2"
37-005A 5 10-923A Extension, 1/4" Dr, 6"
37-006A 6 10-944 Spinner Handle, 1/4" Dr
37-007A 7 10-915A Round Head Ratchet,
37-008A 8 1/4" Dr
37-009A 9
37-010A 10
37-011A 11
37-012A 12
37-013A 13

3-15 Always wear eye protection when near tools in use.

 3
1/4" Drive

Set 44-215 METRIC

12 Pc. 6 Point 1/4" Drive Socket Set
Contents: 12 Sockets in cardboard box. Includes Socket Bar 16-831
and (20) Socket Clips 16-841. Approximate Weight, 0.64 lbs. (291 g)
6-pt. Std. Length Sockets
Product Opening, Product Opening, Product Opening,
Number mm Number mm Number mm
37-004 4 37-007 7 37-011 11
37-005 5 37-008 8 37-012 12
37-083 5.5 37-009 9 37-013 13
37-006 6 37-010 10 37-014 14

Set 44-322A METRIC

10 Pc. 6 Point 1/4" Drive Socket Set

Socket Sets
Contents: 10 Sockets in cardboard box. Includes Socket Bar
and Socket Clips. Approximate Weight, 0.75 lbs. (340 g)
6-pt. Std. Length Sockets
Product Opening, Product Opening, Product Opening,
Number mm Number mm Number mm
37-004A 4 37-008A 8 37-011A 11
37-005A 5 37-009A 9 37-012A 12
37-006A 6 37-010A 10 37-013A 13
37-007A 7

Set 44-220 METRIC

1/4" Drive
12 Pc. 6 Point 1/4" Drive Deep Socket Set
Contents: 12 Sockets in cardboard box. Includes Socket Bar 16-831
and (20) Socket Clips 16-841. Approximate Weight, 1.06 lbs. (481 g)
6-pt. Deep Sockets
Product Opening, Product Opening, Product Opening,
Number mm Number mm Number mm
37-204 4 37-207 7 37-211 11
37-205 5 37-208 8 37-212 12
37-283 5.5 37-209 9 37-213 13
37-206 6 37-210 10 37-214 14

Set 44-225 METRIC

6 Pc. 1/4" Drive Hex Driver Socket Set
Contents: 6 Hex Drivers in cardboard box. Includes Socket Bar 16-831
and (10) Socket Clips 16-841. Approximate Weight, 0.38 Ibs. (173 g)

Product Hex Size, Product Hex Size,

Number mm Number mm
37-703 2 37-707 4
37-704 2.5 37-709 5
37-705 3 37-711 6

3-16
 3
1/4" Drive

Set 15-524A
107 Pc. 6 and 12 Point 1/4", 3/8", and 1/2" Drive
Standard and Metric Socket Set
Contents: 100 Sockets and Accessories, 7 Drive Tools, in Blow Mold
Case. Approximate Weight, ? Ibs.

3/8" Drive Standard Sockets 1/4" Drive Metric Sockets

12-pt. Std. Length Sockets 6-pt. Std. Length Sockets
Product Opening, Product Opening,
Number Inches Number mm
11-112A 3/8 37-004A 4
11-114A 7/16 37-005A 5
11-116A 1/2 37-006A 6
11-118A 9/16 37-007A 7
11-120A 5/8 37-008A 8
11-122A 11/16 37-009A 9
11-124A 3/4 37-010A 10
11-126A 13/16 37-011A 11
12-pt. Deep Sockets 37-012A 12
Product Opening, 37-013A 13
1/4" Drive

Number Inches 6-pt. Deep Sockets

11-312A 3/8 Product Opening,
11-314A 7/16 Number mm
11-316A 1/2 37-204A 4
11-318A 9/16 37-205A 5
11-320A 5/8 37-206A 6
11-322A 11/16 37-207A 7
11-324A 3/4 37-208A 8
Socket Sets

11-326A 13/16 37-209A 9

11-328A 7/8 37-210A 10
6-pt. Spark Plug Sockets 37-211A 11
Product Opening, 3/8" Drive Metric Sockets
Number Inches
11-501 5/8 12-pt. Std. Length Sockets
11-504 13/16 Product Opening,
Number mm
1/4" Drive Standard Sockets 1/2" Drive Standard Sockets 38-110A 10
6-pt. Std. Length Sockets 12-pt. Std. Length Sockets 38-111A 11
Product Opening, Product Opening, 38-112A 12
Number Inches Number Inches 38-113A 13
10-005A 5/32 12-116A 1/2 38-114A 14
10-006A 3/16 12-118A 9/16 38-115A 15
10-007A 7/32 12-120A 5/8 38-116A 16
10-008A 1/4 12-122A 11/16 38-117A 17
10-009A 9/32 12-124A 3/4 38-118A 18
10-010A 5/16 12-126A 13/16 38-119A 19
10-011A 11/32 12-328A 7/8 12-pt. Deep Sockets
10-012A 3/8 12-330A 15/16 Product Opening,
Number mm
10-014A 7/16 12-pt. Deep Sockets
10-016A 1/2 Product Opening, 38-310A 10
Number Inches 38-311A 11
6-pt. Deep Sockets 38-312A 12
Product Opening, 12-316A 1/2
Number Inches 12-318A 9/16 38-313A 13
12-320A 5/8 38-314A 14
10-206A 3/16 38-315A 15
10-207A 7/32 12-322A 11/16
38-316A 16
10-208A 1/4 Drive Tools: 38-317A 17
10-210A 5/16 Product 38-318A 18
10-211A 11/32 Number Description
38-319A 19
10-212A 3/8 10-922A Extension, 1/4" Dr, 3"
10-214A 7/16 10-915A Round Head Ratchet, 1/2" Drive Metric Sockets
1/4" Dr 12-pt. Std. Length Sockets
10-944 Spinner Handle, 1/4" Dr Product Opening,
Number mm
11-922A Extension, 3/8" Dr, 3" 39-118A 18
11-915A Round Head Ratchet, 39-119A 19
3/8" Dr 39-120A 20
11-951 Adapter, 3/8" F, 1/2" M 39-121A 21
39-122A 22
12-921A Extension, 1/2" Dr, 2"
11-916A Round Head Ratchet,
1/2" Dr

3-17 Always wear eye protection when near tools in use.

 3
3/8" Drive

Set 15-300
86 Pc. 6 and 12 Point 3/8" Drive Socket Set with Box
In Plastic Hand Box 16-600.

Set 15-305
86 Pc. 6 and 12 Point 3/8" Drive Socket Set; Tools Only
No Box; Tools Only
Contents: 76 Sockets, 10 Drive Tools.
6-pt. Std. Length Sockets 8-pt. Std. Length Sockets
Product Opening, Product Opening,
Number Inches Number Inches
11-008 1/4 11-408 1/4
11-010 5/16 11-410 5/16
11-011 11/32 11-412 3/8
11-012 3/8 11-414 7/16
11-014 7/16 11-416 1/2
11-016 1/2 12-pt. Universal Sockets
11-018 9/16

Socket Sets
Product Opening,
11-020 5/8 Number Inches
11-022 11/16 11-512 3/8
11-024 3/4 11-514 7/16
11-026 13/16 11-516 1/2
11-028 7/8 11-518 9/16
6-pt. Deep Sockets 11-520 5/8
Product Opening, 11-522 11/16
Number Inches 11-524 3/4
11-208 1/4 Hex Driver Sockets
11-210 5/16 Product Opening,
11-211 11/32 Number Inches
11-212 3/8 11-708 1/8
11-214 7/16 11-710 5/32
11-216 1/2 11-711 3/16
11-218 9/16 11-712 7/32

3/8" Drive
11-220 5/8 11-713 1/4
11-222 11/16 11-714 5/16
11-224 3/4 11-715 3/8
11-226 13/16 Screwdriver Sockets
11-228 7/8
12-pt. Std. Length Sockets Product Opening,
Product Opening, Number Inches/Phillips
Number Inches 11-802 1/4 x 1/32
11-108 1/4 11-803 5/16 x 3/64
11-110 5/16 11-805 3/8 x 1/16
11-112 3/8 11-821 #1
11-114 7/16 11-822 #2
11-116 1/2 11-825 #3
11-118 9/16 11-828 #4
11-120 5/8 Drive Tools:
11-122 11/16 Product
11-124 3/4 Number Description
11-126 13/16 11-918 Breaker Bar, 3/8" Dr, 8-1/2"
11-128 7/8 11-922 Extension, 3/8" Dr, 3"
11-130 15/16 11-923 Extension, 3/8" Dr, 6"
11-132 1 11-925 Extension, 3/8" Dr, 8"
12-pt. Deep Sockets 11-927 Extension, 3/8" Dr, 12"
Product Opening, 11-935 Speeder, 3/8" Dr, 16-1/2"
Number Inches 11-938 T-Handle, 3/8" Dr
11-308 1/4 11-947 Universal Joint, 3/8" Dr
11-310 5/16 11-972 Ratchet, 3/8" Dr, 7-3/8"
11-312 3/8 11-974 Ratchet, 3/8" Dr, Flex
11-314 7/16 Head, 9-1/2"
11-316 1/2
11-318 9/16
11-320 5/8
11-322 11/16
11-324 3/4
11-326 13/16
11-328 7/8
11-330 15/16
11-332 1

3-18
 3
3/8" Drive

Set 15-310
57 Pc. 8 and 12 Point 3/8" Drive Socket Set with Box
In Case 16-615.

Set 15-315
57 Pc. 8 and 12 Point 3/8" Drive Socket Set; Tools Only
No Box; Tools Only
Contents: 49 Sockets, 8 Drive Tools.
12-pt. Std. Length Sockets Hex Driver Sockets
Product Opening, Product Opening,
Number Inches Number Inches
11-108 1/4 11-708 1/8
11-110 5/16 11-710 5/32
11-112 3/8 11-711 3/16
11-114 7/16 11-712 7/32
11-116 1/2 11-713 1/4
3/8" Drive

11-118 9/16 11-714 5/16

11-120 5/8 11-715 3/8
11-122 11/16 Screwdriver Sockets
11-124 3/4
11-126 13/16 Product Opening,
11-128 7/8 Number Inches
11-130 15/16 11-802 1/4 x 1/32
11-132 1 11-822 #2
Socket Sets

12-pt. Deep Sockets 11-825 #3

11-828 #4
Product Opening,
Number Inches Drive Tools:
11-308 1/4 Product
11-310 5/16 Number Description
11-312 3/8 11-918 Breaker Bar, 3/8" Dr, 8-1/2"
11-314 7/16 11-922 Extension, 3/8" Dr, 3"
11-316 1/2 11-923 Extension, 3/8" Dr, 6"
11-318 9/16 11-927 Extension, 3/8" Dr, 12"
11-320 5/8 11-935 Speeder, 3/8" Dr, 16-1/2"
11-322 11/16 11-938 T-Handle, 3/8" Dr
11-324 3/4 11-947 Universal Joint, 3/8" Dr
11-326 13/16 11-972 Ratchet, 3/8" Dr, 7-3/8"
11-328 7/8
11-330 15/16
11-332 1
8-pt. Standard Length Sockets
Product Opening,
Number Inches
11-408 1/4
11-410 5/16
11-412 3/8
11-414 7/16
11-416 1/2
12-pt. Flex Sockets
Product Opening,
Number Inches
11-512 3/8
11-514 7/16
11-516 1/2
11-518 9/16
11-520 5/8
11-522 11/16
11-524 3/4

3-19 Always wear eye protection when near tools in use.

 3
3/8" Drive

Set 15-320
33 Pc. 12 Point 3/8" Drive Socket Set
Contents: 26 Sockets, 7 Drive Tools. In Case 16-613.
Approximate Weight, 12.07 lbs.
12-pt. Std. Length Sockets 8-pt. Std. Length Sockets
Product Opening, Product Opening,
Number Inches Number Inches
11-112 3/8 11-408 1/4
11-114 7/16 11-410 5/16
11-116 1/2 11-412 3/8
11-118 9/16 12-pt. Flex Sockets
11-120 5/8
11-122 11/16 Product Opening,
11-124 3/4 Number Inches
11-126 13/16 11-514 7/16
11-128 7/8 11-516 1/2
11-518 9/16

Socket Sets
12-pt. Deep Sockets
11-520 5/8
Product Opening, 11-524 3/4
Number Inches
Drive Tools:
11-312 3/8
11-314 7/16 Product Opening,
11-316 1/2 Number Inches
11-318 9/16 11-918 Breaker Bar, 3/8" Dr, 8-1/2"
11-320 5/8 11-922 Extension, 3/8" Dr, 3"
11-322 11/16 11-923 Extension, 3/8" Dr, 6"
11-324 3/4 11-927 Extension, 3/8" Dr, 12"
11-326 13/16 11-935 Speeder, 3/8" Dr, 16-1/2"
11-328 7/8 11-947 Universal Joint, 3/8" Dr
11-972 Ratchet, 3/8" Dr, 7-3/8"

3/8" Drive
Set 15-325
22 Pc. 12 Point 3/8" Drive Socket Set
Contents: 18 Sockets, 4 Drive Tools. In Case 16-613.
Approximate Weight, 9.89 lbs.
12-pt. Std. Length Sockets 12-pt. Deep Sockets
Product Opening, Product Opening,
Number Inches Number Inches
11-112 3/8 11-312 3/8
11-114 7/16 11-314 7/16
11-116 1/2 11-316 1/2
11-118 9/16 11-318 9/16
11-120 5/8 11-320 5/8
11-122 11/16 11-322 11/16
11-124 3/4 11-324 3/4
11-126 13/16 11-326 13/16
11-128 7/8 11-328 7/8

Drive Tools:
Product
Number Description
11-922 Extension, 3/8" Dr, 3"
11-923 Extension, 3/8" Dr, 6"
11-947 Universal Joint, 3/8" Dr
11-972 Ratchet, 3/8" Dr, 7-3/8"

3-20
 3
3/8" Drive

Set 15-330
22 Pc. 6 Point 3/8" Drive Socket Set
Contents: 18 Sockets, 4 Drive Tools. In Case 16-613.
Approximate Weight, 9.89 lbs.
6-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number Inches Number Description
11-012 3/8 11-922 Extension, 3/8" Dr, 3"
11-014 7/16 11-923 Extension, 3/8" Dr, 6"
11-016 1/2 11-947 Universal Joint, 3/8" Dr
11-018 9/16 11-972 Ratchet, 3/8" Dr, 7-3/8"
11-020 5/8
11-022 11/16
11-024 3/4
11-026 13/16
11-028 7/8
6-pt. Deep Sockets
3/8" Drive

Product Opening,
Number Inches
11-212 3/8
11-214 7/16
11-216 1/2
11-218 9/16
11-220 5/8
Socket Sets

11-222 11/16
11-224 3/4
11-226 13/16
11-228 7/8

Set 15-331
22 Pc. 6 Point 3/8" Drive Socket Set with
Armstrong Maxx Ratchet
Contents: 18 Sockets, 4 Drive Tools. In Case 16-613.
Approximate Weight, 9.89 lbs.
6-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number Inches Number Description
11-012 3/8 11-922 Extension, 3/8" Dr, 3"
11-014 7/16 11-923 Extension, 3/8" Dr, 6"
11-016 1/2 11-947 Universal Joint, 3/8" Dr
11-018 9/16 11-992 Armstrong Maxx
11-020 5/8 Ratchet, 3/8" Dr
11-022 11/16
11-024 3/4
11-026 13/16
11-028 7/8
6-pt. Deep Sockets
Product Opening,
Number Inches
11-212 3/8
11-214 7/16
11-216 1/2
11-218 9/16
11-220 5/8
11-222 11/16
11-224 3/4
11-226 13/16
11-228 7/8

3-21 Always wear eye protection when near tools in use.

 3
3/8" Drive

Set 15-323A
57 Pc. 6 and 12 Point 1/4" and 3/8" Drive Socket Set
Standard/Metric
In Case. Approximate Weight, 6.52 lbs.
Contents: 44 Sockets, 6 Drive Tools, 7 Hex Keys.

6-pt. Std. Length Sockets: 1/4" Dr. 6-pt. Std. Length Sockets: 1/4" Dr.
Product Opening, Product Opening,
Number Inches Number mm
10-005A 5/32 37-004A 4
10-006A 3/16 37-005A 5
10-007A 7/32 37-006A 6
10-008A 1/4 37-007A 7
10-009A 9/32 37-008A 8
10-010A 5/16 37-009A 9
10-011A 11/32 37-010A 10

Socket Sets
10-012A 3/8 37-011A 11
10-014A 7/16 37-012A 12
10-016A 1/2 37-013A 13
12-pt. Std. Length Sockets: 3/8" Dr. 12-pt. Std. Length Sockets: 3/8" Dr.
Product Opening, Product Opening,
Number Inches Number mm
11-112A 3/8 38-109A 9
11-114A 7/16 38-110A 10
11-116A 1/2 38-111A 11
11-118A 9/16 38-112A 12
11-120A 5/8 38-113A 13
11-122A 11/16 38-114A 14
11-124A 3/4 38-115A 15

3/8" Drive
11-126A 13/16 38-116A 16
12-pt. Deep Sockets: 3/8" Dr. 38-117A 17
38-118A 19
Product Opening,
Number Inches Drive Tools:
11-312A 3/8 Product
11-314A 7/16 Number Description
11-316A 1/2 10-944 Spinner Handle, 1/4" Dr
11-318A 9/16 10-919A Extension, 1/4" Dr, 1-1/2"
11-324A 3/4 11-922A Extension, 3/8" Dr, 3"
6-pt. Spark Plug Socket: 3/8" Dr. 11-923A Extension, 3/8" Dr, 6"
11-951 Adapter, 3/8" F, 1/2" M
Product Opening, 11-967A Teardrop Ratchet,
Number Inches 3/8" Dr
11-501 5/8
Hex Keys
Product Size,
Number Inches
57010 5/64
57012 3/32
57014 1/8
57020 5/32
57022 3/16
57024 7/32
57026 1/4

3-22
 3
3/8" Drive

Set 15-335
22 Pc. 6 Point 1/4" and 3/8" Drive Socket Set
Contents: 17 Sockets, 5 Drive Tools. In Case 16-621.
Approximate Weight, 9.89 lbs.
6-pt. Std. Length Sockets 1/4" Dr. Drive Tools:
Product Opening, Product
Number Inches Number Description
10-006 3/16 10-943 Plastic Handle Driver,
10-007 7/32 1/4" Dr.
10-008 1/4 11-922 Extension, 3/8" Dr, 3"
10-009 9/32 11-923 Extension, 3/8" Dr, 6"
10-010 5/16 11-951 Adapter, 1/4" M, 3/8" F
10-011 11/32 11-972 Ratchet, 3/8" Dr, 7-3/8"
10-012 3/8
6-pt. Std. Length Sockets 3/8" Dr.
Product Opening,
Number Inches
3/8" Drive

11-014 7/16
11-016 1/2
11-018 9/16
11-020 5/8
11-022 11/16
11-024 3/4
11-026 13/16
Socket Sets

11-028 7/8
11-030 15/16
11-032 1

Set 15-322A
18 Pc. 12 Point 3/8" Drive Socket Set
Contents: 15 Sockets, 3 Drive Tools. In Case.
Approximate Weight, 5.9 lbs
12-pt. Std. Length Sockets 12-pt. Spark Plug Socket
Product Opening, Product Opening,
Number Inches Number Inches
11-112A 3/8 11-501 5/8
11-114A 7/16 Drive Tools:
11-116A 1/2
11-118A 9/16 Product
11-120A 5/8 Number Description
11-122A 11/16
11-124A 3/4 11-922A Extension, 3/8" Dr, 3"
11-923A Extension, 3/8" Dr, 6"
12-pt. Deep Sockets 11-967A Quick Release Ratchet,
Product Opening, 3/8" Dr
Number Inches
11-312A 3/8
11-314A 7/16
11-316A 1/2
11-318A 9/16
11-320A 5/8
11-322A 11/16
11-324A 3/4

3-23 Always wear eye protection when near tools in use.

 3
3/8" Drive

Set 15-340
15 Pc. 12 Point 3/8" Drive Socket Set
Contents: 9 Sockets, 6 Drive Tools. In Case 16-613.
Approximate Weight, 8.28 lbs.
12-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number Inches Number Description
11-112 3/8 11-918 Breaker Bar, 3/8" Dr, 8-1/2"
11-114 7/16 11-922 Extension, 3/8" Dr, 3"
11-116 1/2 11-927 Extension, 3/8" Dr, 12"
11-118 9/16 11-935 Speeder, 3/8" Dr, 16-1/2"
11-120 5/8 11-947 Universal Joint, 3/8" Dr
11-122 11/16 11-972 Ratchet, 3/8" Dr, 7-3/8"
11-124 3/4
11-126 13/16
11-128 7/8

Socket Sets
Set 15-345
12 Pc. 12 Point 3/8" Drive Socket Set
Contents: 9 Sockets, 3 Drive Tools. In Case 16-649.
Approximate Weight, 3.45 lbs.
12-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number Inches Number Description
11-112 3/8 11-922 Extension, 3/8" Dr, 3"
11-114 7/16 11-923 Extension, 3/8" Dr, 6"
11-116 1/2 11-972 Ratchet, 3/8" Dr, 7-3/8"

3/8" Drive
11-118 9/16
11-120 5/8
11-122 11/16
11-124 3/4
11-126 13/16
11-128 7/8

Set 15-321A
12 Pc. 12 Point 3/8" Drive Socket Set
Contents: 9 Sockets, 3 Drive Tools. In Case.
Approximate Weight, 3.75 lbs.
12-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number Inches Number Description
11-112A 3/8 11-922A Extension, 3/8" Dr, 3"
11-114A 7/16 11-923A Extension, 3/8" Dr, 6"
11-116A 1/2 11-967A Quick Release Ratchet,
11-118A 9/16 3/8" Dr
11-120A 5/8
11-122A 11/16
11-124A 3/4
11-126A 13/16
12-pt. Spark Plug Socket
Product Opening,
Number Inches
11-501 5/8

3-24
 3
3/8" Drive

Set 15-350
12 Pc. 6 Point 3/8" Drive Socket Set
Contents: 9 Sockets, 3 Drive Tools. In Case 16-649.
Approximate Weight, 3.45 lbs.
6-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number Inches Number Description
11-012 3/8 11-922 Extension, 3/8" Dr, 3"
11-014 7/16 11-923 Extension, 3/8" Dr, 6"
11-016 1/2 11-972 Ratchet, 3/8" Dr, 7-3/8"
11-018 9/16
11-020 5/8
11-022 11/16
11-024 3/4
11-026 13/16
11-028 7/8

Set 15-355
3/8" Drive

13 Pc. 12 Point 3/8" Drive Socket Set

Contents: 13 Sockets in cardboard box. Includes Socket Bar 16-834
and (20) Socket Clips 16-843. Approximate Weight, 1.96 lbs.
12-pt. Std. Length Sockets
Product Opening, Product Opening,
Socket Sets

Number Inches Number Inches

11-108 1/4 11-122 11/16
11-110 5/16 11-124 3/4
11-112 3/8 11-126 13/16
11-114 7/16 11-128 7/8
11-116 1/2 11-130 15/16
11-118 9/16 11-132 1
11-120 5/8

Set 15-360
13 Pc. 6 Point 3/8" Drive Socket Set
Contents: 13 Sockets in cardboard box. Includes Socket Bar 16-834
and (20) Socket Clips 16-843. Approximate Weight, 2.0 lbs.

Set 15-361
13 Pc. 6 Point 3/8" Drive Socket Set with
Plastic Socket Rail
Contents: 13 Sockets in cardboard box. Includes plastic Socket Rail
16-838 and (15) Socket Clips 16-846. Approximate Weight, 2.0 lbs.
6-pt. Std. Length Sockets
Product Opening, Product Opening,
Number Inches Number Inches
11-008 1/4 11-022 11/16
11-010 5/16 11-024 3/4
11-012 3/8 11-026 13/16
11-014 7/16 11-028 7/8
11-016 1/2 11-030 15/16
11-018 9/16 11-032 1
11-020 5/8

3-25 Always wear eye protection when near tools in use.

 3
3/8" Drive

Set 15-365
10 Pc. 12 Point 3/8" Drive Socket Set
Contents: 10 Sockets in cardboard box. Includes Socket Bar 16-832
and (10) Socket Clips 16-843. Approximate Weight, 1.2 lbs.
12-pt. Std. Length Sockets
Product Opening, Product Opening,
Number Inches Number Inches
11-110 5/16 11-120 5/8
11-112 3/8 11-122 11/16
11-114 7/16 11-124 3/4
11-116 1/2 11-126 13/16
11-118 9/16 11-128 7/8

Set 15-324A
10 Pc. 6 Point 3/8" Drive Socket Set

Socket Sets
Contents: 10 Sockets in cardboard box. Includes Socket Bar
and Socket Clips. Approximate Weight, 0.93 lbs.
6-pt. Std. Length Sockets
Product Opening, Product Opening,
Number Inches Number Inches
11-008A 1/4 11-018A 9/16
11-010A 5/16 11-020A 5/8
11-012A 3/8 11-022A 11/16
11-014A 7/16 11-024A 3/4
11-016A 1/2 11-026A 13/16

3/8" Drive
Set 15-370
10 Pc. 6 Point 3/8" Drive Socket Set
Contents: 10 Sockets in cardboard box. Includes Socket Bar 16-832
and (10) Socket Clips 16-843. Approximate Weight, 1.27 lbs.
6-pt. Std. Length Sockets
Product Opening, Product Opening,
Number Inches Number Inches
11-010 5/16 11-020 5/8
11-012 3/8 11-022 11/16
11-014 7/16 11-024 3/4
11-016 1/2 11-026 13/16
11-018 9/16 11-028 7/8

Set 15-375
13 Pc. 12 Point Deep 3/8" Drive Socket Set
Contents: 13 Sockets in cardboard box. Includes Socket Bar 16-834
and (20) Socket Clips 16-843. Approximate Weight, 3.12 lbs.
12-pt. Deep Sockets
Product Opening, Product Opening,
Number Inches Number Inches
11-308 1/4 11-322 11/16
11-310 5/16 11-324 3/4
11-312 3/8 11-326 13/16
11-314 7/16 11-328 7/8
11-316 1/2 11-330 15/16
11-318 9/16 11-332 1
11-320 5/8

3-26
 3
3/8" Drive

Set 15-380
13 Pc. 6 Point Deep 3/8" Drive Socket Set
Contents: 13 Sockets in cardboard box. Includes Socket Bar 16-834
and (20) Socket Clips 16-843. Approximate Weight, 4.08 lbs.
6-pt. Deep Sockets
Product Opening, Product Opening,
Number Inches Number Inches
11-208 1/4 11-222 11/16
11-210 5/16 11-224 3/4
11-212 3/8 11-226 13/16
11-214 7/16 11-228 7/8
11-216 1/2 11-230 15/16
11-218 9/16 11-232 1
11-220 5/8

Set 15-385
10 Pc. 12 Point Deep 3/8" Drive Socket Set
3/8" Drive

Contents: 10 Sockets in cardboard box. Includes Socket Bar 16-831

and (10) Socket Clips 16-843. Approximate Weight, 2.26 lbs.
12-pt. Deep Sockets
Product Opening, Product Opening,
Number Inches Number Inches
11-310 5/16 11-320 5/8
Socket Sets

11-312 3/8 11-322 11/16

11-314 7/16 11-324 3/4
11-316 1/2 11-326 13/16
11-318 9/16 11-328 7/8

Set 15-390
10 Pc. 6 Point Deep 3/8" Drive Socket Set
Contents: 10 Sockets in cardboard box. Includes Socket Bar 16-832
and (10) Socket Clips 16-843. Approximate Weight, 2.32 lbs.
6-pt. Deep Sockets
Product Opening, Product Opening,
Number Inches Number Inches
11-210 5/16 11-220 5/8
11-212 3/8 11-222 11/16
11-214 7/16 11-224 3/4
11-216 1/2 11-226 13/16
11-218 9/16 11-228 7/8

Set 15-326A
9 Pc. 6 Point Deep 3/8" Drive Socket Set
Contents: 9 Sockets in cardboard box. Includes Socket Bar and
Socket Clips. Approximate Weight, 0.98 lbs.
6-pt. Deep Sockets
Product Opening, Product Opening,
Number Inches Number Inches
11-212A 3/8 11-222A 11/16
11-214A 7/16 11-224A 3/4
11-216A 1/2 11-226A 13/16
11-218A 9/16 11-228A 7/8
11-220A 5/8

3-27 Always wear eye protection when near tools in use.

 3
3/8" Drive

Set 15-395
6 Pc. 8 Point 3/8" Drive Socket Set
Contents: 6 Sockets in cardboard box. Includes Socket Bar 16-831
and (10) Socket Clips 16-843. Approximate Weight, 0.72 lbs.
8-pt. Std. Length Sockets
Product Opening, Product Opening,
Number Inches Number Inches
11-410 5/16 11-416 1/2
11-412 3/8 11-418 9/16
11-414 7/16 11-420 5/8

Set 15-400
7 Pc. 12 Point 3/8" Drive Universal Socket Set

Socket Sets
Contents: 7 Sockets in cardboard box. Includes Socket Bar 16-831
and (10) Socket Clips 16-843. Approximate Weight, 0.89 lbs.
12-pt. Flex Sockets
Product Opening, Product Opening,
Number Inches Number Inches
11-512 3/8 11-520 5/8
11-514 7/16 11-522 11/16
11-516 1/2 11-524 3/4
11-518 9/16

Set 15-405

3/8" Drive
9 Pc. 3/8" Drive Crowfoot Wrench Set
Contents: 9 Crowfoot Wrenches in cardboard box. Includes Socket Bar
16-832 and (10) Socket Clips 16-843. Approximate Weight, 1.61 lbs.
Open End Crowfoot Wrenches
Product Opening, Product Opening,
Number Inches Number Inches
11-850 3/8 11-855 11/16
11-851 7/16 11-856 3/4
11-852 1/2 11-857 13/16
11-853 9/16 11-858 7/8
11-854 5/8

Set 15-415
8 Pc. 3/8" Drive Flare Nut Crowfoot Wrench Set
Contents: 8 Flare Nut Crowfoot Wrenches in cardboard box.
Includes Socket Bar 16-832 and (10) Socket Clips 16-843.
Approximate Weight, .80 lbs.
Flare Nut Crowfoot Wrenches
Product Opening, Product Opening,
Number Inches Number Inches
11-842 5/8 11-846 7/8
11-843 11/16 11-847 15/16
11-844 3/4 11-848 1
11-845 13/16 11-849 1-1/16

3-28
 3
3/8" Drive

Set 15-425
7 Pc. 3/8" Drive Extra Long Hex Driver Socket Set
Contents: 7 Hex Drivers in cardboard box. Includes Socket Bar
16-831 and (10) Socket Clips 16-843. Approximate Weight, 1.03 lbs.
Hex Driver Sockets with Extra Long Bits
Product Opening, Product Opening,
Number Inches Number Inches
11-748 1/8 11-753 1/4
11-750 5/32 11-754 5/16
11-751 3/16 11-755 3/8
11-752 7/32

Set 15-430
10 Pc. 3/8" and 1/2" Drive Hex Driver Socket Set
3/8" Drive

Contents: 10 Hex Drivers in Blow Molded case, 16-697.

Hex Driver Sockets with Std. Length Bits
Product Opening, Product Opening,
Number Inches Number Inches
11-708 1/8 11-714 5/16
11-710 5/32 11-715 3/8
11-711 3/16 12-717 1/2
Socket Sets

11-712 7/32 12-718 9/16

11-713 1/4 12-719 5/8

Set 15-435
10 Pc. 3/8" and 1/2" Drive Hex Driver Socket Set
Contents: 10 Hex Drivers in cardboard box. Includes Socket Bar
16-831 and (10) Socket Clips 16-843 and (10) Socket Clips 16-845.
Approximate Weight, 2.1 lbs.
Hex Driver Sockets with Std. Length Bits
Product Opening, Product Opening,
Number Inches Number Inches
11-708 1/8 11-714 5/16
11-710 5/32 11-715 3/8
11-711 3/16 12-717 1/2
11-712 7/32 12-718 9/16
11-713 1/4 12-719 5/8

Set 15-440
7 Pc. 3/8" Drive Hex Driver Socket Set
Contents: 7 Hex Drivers in cardboard box. Includes Socket Bar
16-831 and (10) Socket Clips 16-843. Approximate Weight, 0.69 lbs.
Hex Driver Sockets with Std. Length Bits
Product Opening, Product Opening,
Number Inches Number Inches
11-708 1/8 11-713 1/4
11-710 5/32 11-714 5/16
11-711 3/16 11-715 3/8
11-712 7/32

3-29 Always wear eye protection when near tools in use.

 3
3/8" Drive

Set 15-445
8 Pc. 3/8" Drive Torx™ Driver Socket Set
Contents: 8 Torx Drivers in cardboard box. Includes Socket Bar
16-831 and (10) Socket Clips 16-843. Approximate Weight, 0.85 lbs.
Tor x Driver Sockets

Product Opening, Product Opening,

Number Tor x Number Tor x
11-872 T15 11-880 T30
11-874 T20 11-882 T40
11-876 T25 11-884 T45
11-878 T27 11-886 T50
TORX® is the registered trademark of Acument Intellectual Properties, LLC.

Set 15-450

Socket Sets
6 Pc. 3/8" Drive Torx® Driver Socket Set
Contents: 6 Torx Drivers in cardboard box. Includes Socket Bar
16-831 and (10) Socket Clips 16-843. Approximate Weight, 0.69 lbs.
Tor x Driver Sockets
Product Opening, Product Opening,
Number Tor x Number Tor x
11-872 T15 11-878 T27
11-874 T20 11-880 T30
11-876 T25 11-882 T40
TORX® is the registered trademark of Acument Intellectual Properties, LLC.

3/8" Drive
Set 15-455
7 Pc. 3/8" Drive Screwdriver Socket Set
Contents: 7 Screwdriver Sockets in cardboard box. Includes Socket Bar
16-831 and (10) Socket Clips 16-843. Approximate Weight, 0.86 lbs.
Slotted Screwdriver Sockets Phillips Screwdriver Sockets
Product Opening, Product Opening,
Number Inches Number Number
11-802 1/4 x 1/32 11-821 #1
11-803 5/16 x 3/64 11-822 #2
11-805 3/8 x 1/16 11-825 #3
11-828 #4

3-30
 3
3/8" Drive

Set 19-150
13 Pc. 12 Point 3/8" Drive Black Oxide Socket Set
Contents: 13 Sockets in cardboard box. Includes Socket Bar 16-834
and (20) Socket Clips 16-843. Approximate Weight, 2.38 lbs.
12-pt. Black Oxide Sockets
Product Opening, Product Opening,
Number Inches Number Inches
19-108 1/4 19-122 11/16
19-110 5/16 19-124 3/4
19-112 3/8 19-126 13/16
19-114 7/16 19-128 7/8
19-116 1/2 19-130 15/16
19-118 9/16 19-132 1
19-120 5/8
3/8" Drive

Set 19-155
11 Pc. 12 Point Deep 3/8" Drive Black Oxide
Socket Set
Contents: 11 Sockets in cardboard box. Includes Socket Bar 16-834
and (20) Socket Clips 16-843. Approximate Weight, 1.58 lbs.
Socket Sets

12-pt. Deep Black Oxide Sockets

Product Opening, Product Opening,
Number Inches Number Inches
19-312 3/8 19-324 3/4
19-314 7/16 19-326 13/16
19-316 1/2 19-328 7/8
19-318 9/16 19-330 15/16
19-320 5/8 19-332 1
19-322 11/16

Set 19-160
7 Pc. 12 Point 3/8" Drive Universal Black Oxide
Socket Set
Contents: 7 Sockets in cardboard box. Includes Socket Bar 16-831
and (10) Socket Clips 16-843. Approximate Weight, 0.98 lbs.
12-pt. Universal Black Oxide Sockets
Product Opening, Product Opening,
Number Inches Number Inches
19-512 3/8 19-520 5/8
19-514 7/16 19-522 11/16
19-516 1/2 19-524 3/4
19-518 9/16

3-31 Always wear eye protection when near tools in use.

 3
3/8" Drive

Set 44-300 METRIC

56 Pc. 12 Point 3/8" Drive Socket Set with Box
In Case 16-615.

Set 44-305 METRIC

56 Pc. 12 Point 3/8" Drive Socket Set; Tools Only
No Box; Tools Only
Contents: 44 Sockets, 12 Drive Tools.
Approximate Weight, 14.47 lbs. (6,569 g)
12-pt. Std. Length Sockets Hex Driver Sockets
Product Opening, Product Opening,
Number mm Number mm
38-106 6 38-707 4
38-107 7 38-709 5
38-108 8 38-711 6

Socket Sets
38-109 9 38-712 7
38-110 10 38-713 8
38-111 11 38-714 9
38-112 12 38-715 10
38-113 13 Drive Tools:
38-114 14
38-115 15 Product
38-116 16 Number Description
38-117 17 11-918 Breaker Bar, 3/8" Dr,
38-118 18 8-1/2"
38-119 19 11-922 Extension, 3/8" Dr, 3"
38-120 20 11-923 Extension, 3/8" Dr, 6"
38-121 21 11-927 Extension, 3/8" Dr, 12"
38-122 22 11-929 Extension, 3/8" Dr,

3/8" Drive
12-pt. Deep Sockets Flex, 7-1/4"
11-931 Locking Adapter, 3/8" Dr
Product Opening, 11-935 Speeder, 3/8" Dr
Number mm 11-938 T-Handle, 3/8" Dr
38-306 6 11-943 Plastic Handle Driver,
38-307 7 3/8" Dr, 6"
38-308 8 11-945 Ratchet Spinner, 3/8" Dr
38-309 9 11-947 Universal Joint, 3/8" Dr
38-310 10 11-952 Adapter, 3/8" F, 1/2" M
38-311 11 11-972 Ratchet, 3/8" Dr, 7-3/8"
38-312 12 11-974 Ratchet Flex Head, 3/8" Dr
38-313 13
38-314 14
38-315 15
38-316 16
38-317 17
38-318 18
38-319 19
Screwdriver Sockets
Product Opening,
Number Inches
11-802 1/4 x 1/32
11-822 #2
11-825 #3
11-828 #4

3-32
 3
3/8" Drive

Set 44-310 METRIC

29 Pc. 12 Point 3/8" Drive Socket Set
Contents: 24 Sockets, 5 Drive Tools. In Case 16-613.
Approximate Weight, 9.53 lbs. (4,327 g)
12-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number mm Number Description
38-108 8 11-918 Breaker Bar, 3/8" Dr
38-109 9 11-922 Extension, 3/8" Dr, 3"
38-110 10 11-923 Extension, 3/8" Dr, 6"
38-111 11 11-947 Universal Joint, 3/8" Dr
38-112 12 11-972 Ratchet, 3/8" Dr, 7-3/8"
38-113 13
38-114 14
38-115 15
38-116 16
38-117 17
38-118 18
3/8" Drive

38-119 19

12-pt. Deep Sockets

Product Opening,
Number mm
38-308 8
38-309 9
Socket Sets

38-310 10
38-311 11
38-312 12
38-313 13
38-314 14
38-315 15
38-316 16
38-317 17
38-318 18
38-319 19

3-33 Always wear eye protection when near tools in use.

 3
3/8" Drive

Set 44-315 METRIC

29 Pc. 6 Point 3/8" Drive Socket Set
Contents: 24 Sockets, 5 Drive Tools. In Case 16-613.
Approximate Weight, 9.53 lbs. (4,327 g)
6-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number mm Number Description
38-008 8 11-918 Breaker Bar, 3/8" Dr
38-009 9 11-922 Extension, 3/8" Dr, 3"
38-010 10 11-923 Extension, 3/8" Dr, 6"
38-011 11 11-947 Universal Joint, 3/8" Dr
38-012 12 11-972 Ratchet, 3/8" Dr, 7-3/8"
38-013 13
38-014 14
38-015 15
38-016 16
38-017 17
38-018 18

Socket Sets
38-019 19
6-pt. Deep Sockets
Product Opening,
Number mm
38-208 8
38-209 9
38-210 10
38-211 11
38-212 12
38-213 13
38-214 14
38-215 15
38-216 16
38-217 17

3/8" Drive
38-218 18
38-219 19

Set 44-326A METRIC

22 Pc. 6 Point 3/8" Drive Socket Set
Contents: 19 Sockets, 3 Drive Tools. In Case.
Approximate Weight, 9.0 lbs. (4,082 g)
6-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number mm Number Description
38-010A 10 11-922A Extension, 3/8" Dr, 3"
38-011A 11 11-923A Extension, 3/8" Dr, 6"
38-012A 12 38-319A Quick Release Ratchet,
38-013A 13 3/8" Dr
38-014A 14
38-015A 15
38-016A 16
38-017A 17
38-018A 18
38-019A 19
6-pt. Deep Sockets
Product Opening,
Number mm
38-210A 10
38-211A 11
38-212A 12
38-213A 13
38-214A 14
38-215A 15
38-217A 17
38-219A 19

3-34
 3
3/8" Drive

Set 44-320 METRIC

20 Pc. 12 Point 3/8" Drive Socket Set
Contents: 14 Sockets, 6 Drive Tools. In Case 16-613.
Approximate Weight, 7.67 lbs. (3,482 g)
12-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number mm Number Description
38-106 6 11-918 Breaker Bar, 3/8" Dr
38-107 7 11-922 Extension, 3/8" Dr, 3"
38-108 8 11-927 Extension, 3/8" Dr, 12"
38-109 9 11-935 Speeder, 3/8" Dr
38-110 10 11-947 Universal Joint, 3/8" Dr
38-111 11 11-972 Ratchet, 3/8" Dr, 7-3/8"
38-112 12
38-113 13
38-114 14
38-115 15
38-116 16
3/8" Drive

38-117 17
38-118 18
38-119 19
Socket Sets

Set 44-325 METRIC

16 Pc. 12 Point 3/8" Drive Socket Set
Contents: 14 Sockets, 2 Drive Tools. In Case 16-621.
Approximate Weight, 6.73 lbs. (3,055 g)
12-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number mm Number Description
38-106 6 11-923 Extension, 3/8" Dr, 6"
38-107 7 11-972 Ratchet, 3/8" Dr, 7-3/8"
38-108 8
38-109 9
38-110 10
38-111 11
38-112 12
38-113 13
38-114 14
38-115 15
38-116 16
38-117 17
38-118 18
38-119 19

3-35 Always wear eye protection when near tools in use.

 3
3/8" Drive

Set 44-330 METRIC

19 Pc. 12 Point 3/8" Drive Socket Set
Contents: 19 Sockets in cardboard box. Includes Socket Bar 16-835
and (20) Socket Clips 16-843. Approximate Weight, 2.62 lbs. (922 g)
12-pt. Std. Length Sockets
Product Opening, Product Opening, Product Opening,
Number mm Number mm Number mm
38-106 6 38-112 12 38-118 18
38-107 7 38-113 13 38-119 19
38-108 8 38-114 14 38-120 20
38-109 9 38-115 15 38-121 21
38-110 10 38-116 16 38-122 22
38-111 11 38-117 17 38-123 23
38-126 26

Set 44-335 METRIC

Socket Sets
19 Pc. 6 Point 3/8" Drive Socket Set
Contents: 19 Sockets in cardboard box. Includes Socket Bar 16-835
and (20) Socket Clips 16-843. Approximate Weight, 2.01 lbs. (913 g)
6-pt. Std. Length Sockets
Product Opening, Product Opening, Product Opening,
Number mm Number mm Number mm
38-006 6 38-012 12 38-018 18
38-007 7 38-013 13 38-019 19
38-008 8 38-014 14 38-020 20
38-009 9 38-015 15 38-021 21
38-010 10 38-016 16 38-022 22
38-011 11 38-017 17 38-023 23

3/8" Drive
38-026 26

Set 44-324A METRIC

13 Pc. 6 Point 3/8" Drive Socket Set
Contents: 13 Sockets in cardboard box. Includes Socket Bar
and Socket Clips. Approximate Weight, 1.05 lbs. (476 g)
6-pt. Std. Length Sockets
Product Opening, Product Opening, Product Opening,
Number mm Number mm Number mm
38-007A 7 38-012A 12 38-016A 16
38-008A 8 38-013A 13 38-017A 17
38-009A 9 38-014A 14 38-018A 18
38-010A 10 38-015A 15 38-019A 19
38-011A 11

Set 44-340 METRIC

12 Pc. 12 Point 3/8" Drive Socket Set
Contents: 12 Sockets in cardboard box. Includes Socket Bar 16-832
and (20) Socket Clips 16-843. Approximate Weight, 1.32 lbs. (527 g)
12-pt. Std. Length Sockets
Product Opening, Product Opening,
Number mm Number mm
38-108 8 38-114 14
38-109 9 38-115 15
38-110 10 38-116 16
38-111 11 38-117 17
38-112 12 38-118 18
38-113 13 38-119 19

3-36
 3
3/8" Drive

Set 44-345 METRIC

12 Pc. 6 Point 3/8" Drive Socket Set
Contents: 12 Sockets in cardboard box. Includes Socket Bar 16-832
and (20) Socket Clips 16-843. Approximate Weight, 1.42 lbs. (527 g)

Set 44-346 METRIC

12 Pc. 6 Point 3/8" Drive Socket Set with
Plastic Socket Rail
Contents: 12 Sockets in cardboard box. Includes plastic Socket Rail
16-839 and (15) Socket Clips 16-846. Approximate Weight, 1.42 lbs.
(527 g)
6-pt. Std. Length Sockets
Product Opening, Product Opening,
Number mm Number mm
38-008 8 38-014 14
3/8" Drive

38-009 9 38-015 15
38-010 10 38-016 16
38-011 11 38-017 17
38-012 12 38-018 18
38-013 13 38-019 19

Set 44-350 METRIC

Socket Sets

18 Pc. 12 Point 3/8" Drive Deep Socket Set

Contents: 18 Sockets in cardboard box. Includes Socket Bar 16-835
and (20) Socket Clips 16-843. Approximate Weight, 2.07 lbs. (940 g)
12-pt. Deep Sockets
Product Opening, Product Opening,
Number mm Number mm
38-306 6 38-315 15
38-307 7 38-316 16
38-308 8 38-317 17
38-309 9 38-318 18
38-310 10 38-319 19
38-311 11 38-320 20
38-312 12 38-321 21
38-313 13 38-322 22
38-314 14 38-323 23

Set 44-355 METRIC

18 Pc. 6 Point 3/8" Drive Deep Socket Set
Contents: 18 Sockets in cardboard box. Includes Socket Bar 16-835
and (20) Socket Clips 16-843. Approximate Weight, 2.12 lbs. (962 g)
6-pt. Deep Sockets
Product Opening, Product Opening,
Number mm Number mm
38-206 6 38-215 15
38-207 7 38-216 16
38-208 8 38-217 17
38-209 9 38-218 18
38-210 10 38-219 19
38-211 11 38-220 20
38-212 12 38-221 21
38-213 13 38-222 22
38-214 14 38-223 23

3-37 Always wear eye protection when near tools in use.

 3
3/8" Drive

Set 44-360 METRIC

12 Pc. 12 Point 3/8" Drive Deep Socket Set
Contents: 12 Sockets in cardboard box. Includes Socket Bar 16-832
and (20) Socket Clips 16-843. Approximate Weight, 2.07 lbs. (940 g)
12-pt. Deep Sockets
Product Opening, Product Opening,
Number mm Number mm
38-308 8 38-314 14
38-309 9 38-315 15
38-310 10 38-316 16
38-311 11 38-317 17
38-312 12 38-318 18
38-313 13 38-319 19

Socket Sets
Set 44-365 METRIC
12 Pc. 6 Point 3/8" Drive Deep Socket Set
Contents: 12 Sockets in cardboard box. Includes Socket Bar 16-832
and (20) Socket Clips 16-843. Approximate Weight, 2.12 lbs. (962 g)
6-pt. Deep Sockets
Product Opening, Product Opening,
Number mm Number mm
38-208 8 38-214 14
38-209 9 38-215 15
38-210 10 38-216 16
38-211 11 38-217 17

3/8" Drive
38-212 12 38-218 18
38-213 13 38-219 19

Set 44-370 METRIC

12 Pc. 3/8" Drive Crowfoot Wrench Set
Contents: 12 Metric Crowfoot Wrenches in cardboard box. Includes
Socket Bar 16-835 and (20) Socket Clips 16-843. Approximate
Weight, 1.6 lbs. (726 g)
Open End Crowfoot Wrenches
Product Opening, Product Opening,
Number mm Number mm
38-850 10 38-856 16
38-851 11 38-857 17
38-852 12 38-858 18
38-853 13 38-859 19
38-854 14 38-861 21
38-855 15 38-862 22

3-38
 3
3/8" Drive

Set 44-375 METRIC

6 Pc. 3/8" Drive Extra Long Hex Driver Socket Set
Contents: 6 Hex Drivers in cardboard box. Includes Socket Bar 16-831
and (10) Socket Clips 16-843. Approximate Weight, 0.96 lbs. (436 g)
Hex Driver Sockets with Extra Long Bits
Product Opening, Replacement Product Opening, Replacement
Number mm Bit Part # Number mm Bit Part #
38-747 4 94-347 38-752 7 94-352
38-749 5 94-349 38-753 8 94-353
38-751 6 94-351 38-755 10 94-355

Set 44-380 METRIC

10 Pc. 3/8" and 1/2" Drive Hex Driver Socket Set
3/8" Drive

Contents: 10 Metric Hex Driver Sockets in Blow Molded Case, 16-697.

Metric Hex Driver Sockets with Std. Length Bits
Product Opening, Replacement Product Opening, Replacement
Number mm Bit Part # Number mm Bit Part #
38-707 4 94-307 38-714 9 94-314
38-709 5 94-309 38-715 10 94-315
38-711 6 94-311 39-717 12 94-717
Socket Sets

38-712 7 94-312 39-719 14 94-719

38-713 8 94-313 39-722 17 94-722

Set 44-385 METRIC

7 Pc. 3/8" Drive Hex Driver Socket Set
Contents: 7 Hexdriver Sockets in cardboard box. Includes Socket
Bar 16-831 and (10) Socket Clips 16-843. Approximate Weight,
0.65 lbs. (295 g)
Hex Driver Sockets with Std. Length Bits
Product Opening, Replacement Product Opening, Replacement
Number mm Bit Part # Number mm Bit Part #
38-707 4 94-307 38-713 8 94-313
38-709 5 94-309 38-714 9 94-314
38-711 6 94-311 38-715 10 94-315
38-712 7 94-312

3-39 Always wear eye protection when near tools in use.

 3
1/2" Drive

Set 15-500
65 Pc. 8 and 12 Point 1/2" Drive Socket Set with Box
In 6 Drawer Top Chest 16-880.

Set 15-505
65 Pc. 8 and 12 Point 1/2" Drive Socket Set; Tools Only
No Box; Tools Only
Contents: 55 Sockets, 10 Drive Tools.
Approximate Weight, 51.02 lbs.

12-pt. Std. Length Sockets 8-pt. Std. Length Sockets

Product Opening, Product Opening,
Number Inches Number Inches
12-112 3/8 12-412 3/8
12-114 7/16 12-414 7/16
12-116 1/2 12-416 1/2

Socket Sets
12-118 9/16 12-418 9/16
12-119 19/32 12-420 5/8
12-120 5/8 12-422 11/16
12-122 11/16 12-424 3/4
12-124 3/4 12-426 13/16
12-125 25/32 12-428 7/8
12-126 13/16 12-432 1
12-128 7/8
12-130 15/16 12-pt. Universal Sockets
12-132 1 Product Opening,
12-134 1-1/16 Number Inches
12-136 1-1/8 12-516 1/2
12-138 1-3/16 12-518 9/16
12-140 1-1/4 12-520 5/8

1/2" Drive
12-142 1-5/16
12-144 1-3/8 Drag Link Socket
12-146 1-7/16 Product Opening,
12-148 1-1/2 Number Inches
12-pt. Deep Sockets 12-892 7/64 x 15/16
12-893 3/32 x 1-1/4
Product Opening,
Number Inches Drive Tools:
12-316 1/2 Product
12-318 9/16 Number Description
12-320 5/8 12-918 Breaker Bar, 1/2" Dr, 17"
12-322 11/16 12-921 Extension, 1/2" Dr, 2-1/2"
12-324 3/4 12-923 Extension, 1/2" Dr, 5"
12-326 13/16 12-924 Extension, 1/2" Dr, 10"
12-328 7/8 12-935 Speeder, 1/2" Dr
12-330 15/16 12-938 T-Handle, 1/2" Dr
12-332 1 12-947 Universal Joint, 1/2" Dr
12-334 1-1/16 12-972 Ratchet, 1/2" Dr, 10-1/2"
12-336 1-1/8 12-973 Ratchet, 1/2" Dr, 15"
12-340 1-1/4 12-951 Adapter, 1/2" F x 3/4" M,
Hex Driver Sockets 1/2" Dr
Product Opening,
Number Inches
12-713 1/4
12-714 5/16
12-715 3/8
12-716 7/16
12-717 1/2
12-718 9/16
12-719 5/8

3-40
 3
1/2" Drive

Set 15-510
30 Pc. 12 Point 1/2" Drive Socket Set
Contents: 26 Sockets, 4 Drive Tools. In Case 16-629.
Approximate Weight, 24.47 lbs.
12-pt. Std. Length Sockets 12-pt. Deep Sockets
Product Opening, Product Opening,
Number Inches Number Inches
12-112 3/8 12-316 1/2
12-114 7/16 12-318 9/16
12-116 1/2 12-320 5/8
12-118 9/16 12-322 11/16
12-120 5/8 12-324 3/4
12-122 11/16 12-326 13/16
12-124 3/4 12-328 7/8
12-126 13/16 12-330 15/16
12-128 7/8 12-332 1
12-130 15/16 12-334 1-1/16
12-132 1 12-336 1-1/8
1/2" Drive

12-134 1-1/16 12-340 1-1/4

12-136 1-1/8 Drive Tools:
12-140 1-1/4
Product
Number Description
12-918 Breaker Bar, 1/2" Dr, 17"
12-923 Extension, 1/2" Dr, 5"
Socket Sets

12-924 Extension, 1/2" Dr, 10"

12-972 Ratchet, 1/2" Dr, 10-1/2"

Set 15-511
30 Pc. 12 Point 1/2" Drive Socket Set with
Armstrong Maxx Ratchet
Contents: 26 Sockets, 4 Drive Tools. In Case 16-629.
Approximate Weight, 24.47 lbs.
12-pt. Std. Length Sockets 12-pt. Deep Sockets
Product Opening, Product Opening,
Number Inches Number Inches
12-112 3/8 12-316 1/2
12-114 7/16 12-318 9/16
12-116 1/2 12-320 5/8
12-118 9/16 12-322 11/16
12-120 5/8 12-324 3/4
12-122 11/16 12-326 13/16
12-124 3/4 12-328 7/8
12-126 13/16 12-330 15/16
12-128 7/8 12-332 1
12-130 15/16 12-334 1-1/16
12-132 1 12-336 1-1/8
12-134 1-1/16 12-340 1-1/4
12-136 1-1/8 Drive Tools:
12-140 1-1/4
Product
Number Description
12-918 Breaker Bar, 1/2" Dr, 17"
12-923 Extension, 1/2" Dr, 5"
12-924 Extension, 1/2" Dr, 10"
12-992 Armstrong Maxx Ratchet,
1/2" Dr

3-41 Always wear eye protection when near tools in use.

 3
1/2" Drive

Set 15-515
27 Pc. 12 Point 1/2" Drive Socket Set
Contents: 14 Sockets, 5 Drive Tools, 7 Wrenches, 1 Pliers.
In Case 16-629. Approximate Weight, 19.08 lbs.
12-pt. Std. Length Sockets Spark Plug Socket
Product Opening, Product Opening,
Number Inches Number Inches
12-114 7/16 12-504 13/16
12-116 1/2
12-118 9/16 Tongue & Groove Pliers
12-120 5/8 Product Length,
12-122 11/16 Number Inches
12-124 3/4 67-779 10
12-126 13/16
12-128 7/8 Drive Tools:
12-130 15/16 Product
12-132 1

Socket Sets
Number Description
12-134 1-1/16
12-136 1-1/8 12-918 Breaker Bar, 1/2" Dr, 17"
12-140 1-1/4 12-923 Extension, 1/2" Dr, 5"
12-924 Extension, 1/2" Dr, 10"
12-pt. Full Polish 12-947 Universal Joint, 1/2" Dr
Combination Wrenches 12-972 Ratchet, 1/2" Dr, 10-1/2"
Product Opening,
Number Inches
25-212 3/8
25-214 7/16
25-216 1/2
25-218 9/16
25-220 5/8
25-222 11/16

1/2" Drive
25-224 3/4

3-42
 3
1/2" Drive

Set 15-520
26 Pc. 12 Point 1/2" Drive Socket Set
Contents: 18 Sockets, 8 Drive Tools. In Case 16-629.
Approximate Weight, 19.08 lbs.
12-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number Inches Number Description
12-112 3/8 12-918 Breaker Bar, 1/2" Dr,17"
12-114 7/16 12-921 Extension, 1/2" Dr, 2-1/2"
12-116 1/2 12-923 Extension, 1/2" Dr, 5"
12-118 9/16 12-924 Extension, 1/2" Dr, 10"
12-119 19/32 12-935 Speeder, 1/2" Dr
12-120 5/8 12-945 Ratchet Spinner, 1/2" Dr
12-121 21/32 12-947 Universal Joint, 1/2" Dr
12-122 11/16 12-972 Ratchet, 1/2" Dr, 10-1/2"
12-124 3/4
12-125 25/32
12-126 13/16
1/2" Drive

12-128 7/8
12-130 15/16
12-132 1
12-134 1-1/16
12-136 1-1/8
12-138 1-3/16
12-140 1-1/4
Socket Sets

Set 15-517A
23 Pc. 6 and 12 Point 1/2" Drive Socket Set
Contents: 20 Sockets, 3 Drive Tools. In Case.
Approximate Weight, 13.25 lbs.

6-pt. Std. Length Sockets 12-pt. Deep Sockets

Product Opening, Product Opening,
Number Inches Number Inches
12-014A 7/16 12-316A 1/2
12-016A 1/2 12-318A 9/16
12-018A 9/16 12-320A 5/8
12-pt. Std. Length Sockets 12-322A 11/16
12-324A 3/4
Product Opening, 12-326A 13/16
Number Inches 12-328A 7/8
12-120A 5/8
12-122A 11/16 Drive Tools:
12-124A 3/4 Product
12-126A 13/16 Number Description
12-128A 7/8 12-923A Extension, 1/2" Dr, 6"
12-130A 15/16 12-917A Flex Handle, 1/2" Dr, 15"
12-132A 1 12-967A Quick Release Ratchet,
12-134A 1-1/16 1/2" Dr
12-136A 1-1/8
12-140A 1-1/4

3-43 Always wear eye protection when near tools in use.

 3
1/2" Drive

Set 15-525
18 Pc. 12 Point 1/2" Drive Socket Set
Contents: 15 Sockets, 3 Drive Tools. In Case 16-629.
Approximate Weight, 19.08 lbs.
12-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number Inches Number Description
12-112 3/8 12-918 Breaker Bar, 1/2" Dr, 17"
12-114 7/16 12-923 Extension, 1/2" Dr, 5"
12-116 1/2 12-972 Ratchet, 1/2" Dr, 10-1/2"
12-118 9/16
12-120 5/8
12-122 11/16
12-124 3/4
12-126 13/16
12-128 7/8
12-130 15/16

Socket Sets
12-132 1
12-134 1-1/16
12-136 1-1/8
12-138 1-3/16
12-140 1-1/4

Set 15-530
18 Pc. 6 Point 1/2" Drive Socket Set

1/2" Drive
Contents: 15 Sockets, 3 Drive Tools. In Case 16-629.
Approximate Weight, 19.08 lbs.
6-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number Inches Number Description
12-012 3/8 12-918 Breaker Bar, 1/2" Dr, 17"
12-014 7/16 12-923 Extension, 1/2" Dr, 5"
12-016 1/2 12-972 Ratchet, 1/2" Dr, 10-1/2"
12-018 9/16
12-020 5/8
12-022 11/16
12-024 3/4
12-026 13/16
12-028 7/8
12-030 15/16
12-032 1
12-034 1-1/16
12-036 1-1/8
12-038 1-3/16
12-040 1-1/4

3-44
 3
1/2" Drive

Set 15-535
16 Pc. 12 Point 1/2" Drive Socket Set
Contents: 10 Sockets, 6 Drive Tools. In Case 16-629.
Approximate Weight, 11.46 lbs.
12-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number Inches Number Description
12-114 7/16 12-918 Breaker Bar, 1/2" Dr, 17"
12-116 1/2 12-923 Extension, 1/2" Dr, 5"
12-118 9/16 12-924 Extension, 1/2" Dr, 10"
12-120 5/8 12-935 Speeder, 1/2" Dr
12-122 11/16 12-947 Universal Joint, 1/2" Dr
12-124 3/4 12-972 Ratchet, 1/2" Dr, 10-1/2"
12-126 13/16
12-128 7/8
12-130 15/16
12-132 1
1/2" Drive

Set 15-518A
16 Pc. 12 Point 1/2" Drive Socket Set
Contents: 13 Sockets, 3 Drive Tools. In Case.
Approximate Weight, 9.00 lbs.
12-pt. Std. Length Sockets Drive Tools:
Socket Sets

Product Opening, Product

Number Inches Number Description
12-114A 7/16 12-923A Extension, 1/2" Dr, 6"
12-116A 1/2 12-917A Flex Handle, 1/2" Dr, 15"
12-118A 9/16 12-967A Quick Release Ratchet,
12-120A 5/8 1/2" Dr
12-122A 11/16
12-124A 3/4
12-126A 13/16
12-128A 7/8
12-130A 15/16
12-132A 1
12-134A 1-1/16
12-136A 1-1/8
12-140A 1-1/4

Set 15-540
12 Pc. 12 Point 1/2" Drive Socket Set
Contents: 10 Sockets, 2 Drive Tools. In Case 16-623.
Approximate Weight, 6.47 lbs.
12-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number Inches Number Description
12-114 7/16 12-923 Extension, 1/2" Dr, 5"
12-116 1/2 12-972 Ratchet, 1/2" Dr, 10-1/2"
12-118 9/16
12-120 5/8
12-122 11/16
12-124 3/4
12-126 13/16
12-128 7/8
12-130 15/16
12-132 1

3-45 Always wear eye protection when near tools in use.

 3
1/2" Drive

Set 15-519A
12 Pc. 12 Point 1/2" Drive Socket Set
Contents: 10 Sockets, 2 Drive Tools. In Case.
Approximate Weight, 4.06 lbs
12-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number Inches Number Description
12-114A 7/16 12-923A Extension, 1/2" Dr, 6"
12-116A 1/2 12-967A Quick Release Ratchet,
12-118A 9/16 1/2" Dr
12-120A 5/8
12-122A 11/16
12-124A 3/4
12-126A 13/16
12-128A 7/8
12-130A 15/16
12-132A 1

Socket Sets
Set 15-545
19 Pc. 12 Point 1/2" Drive Socket Set
Contents: 19 Sockets in cardboard box. Includes Socket Bars 16-831 and
16-835 and (20) Socket Clips 16-845. Approximate Weight, 7.02 lbs.
12-pt. Std. Length Sockets
Product Opening, Product Opening, Product Opening,
Number Inches Number Inches Number Inches
12-112 3/8 12-126 13/16 12-140 1-1/4
12-114 7/16 12-128 7/8 12-142 1-5/16
12-116 1/2 12-130 15/16 12-144 1-3/8
12-118 9/16 12-132 1 12-146 1-7/16
12-120 5/8 12-134 1-1/16 12-148 1-1/2

1/2" Drive
12-122 11/16 12-136 1-1/8
12-124 3/4 12-138 1-3/16

Set 15-550
19 Pc. 6 Point 1/2" Drive Socket Set
Contents: 19 Sockets in cardboard box. Includes Socket Bars 16-831 and
16-835 and (20) Socket Clips 16-845. Approximate Weight, 7.02 lbs.
6-pt. Std. Length Sockets
Product Opening, Product Opening, Product Opening,
Number Inches Number Inches Number Inches
12-012 3/8 12-026 13/16 12-040 1-1/4
12-014 7/16 12-028 7/8 12-042 1-5/16
12-016 1/2 12-030 15/16 12-044 1-3/8
12-018 9/16 12-032 1 12-046 1-7/16
12-020 5/8 12-034 1-1/16 12-048 1-1/2
12-022 11/16 12-036 1-1/8
12-024 3/4 12-038 1-3/16

Set 15-555
15 Pc. 12 Point 1/2" Drive Socket Set
Contents: 15 Sockets in cardboard box. Includes Socket Bar 16-835
and (20) Socket Clips 16-845. Approximate Weight, 4.21 lbs.
12-pt. Std. Length Sockets
Product Opening, Product Opening, Product Opening,
Number Inches Number Inches Number Inches
12-112 3/8 12-122 11/16 12-132 1
12-114 7/16 12-124 3/4 12-134 1-1/16
12-116 1/2 12-126 13/16 12-136 1-1/8
12-118 9/16 12-128 7/8 12-138 1-3/16
12-120 5/8 12-130 15/16 12-140 1-1/4

3-46
 3
1/2" Drive

Set 15-560
15 Pc. 6 Point 1/2" Drive Socket Set
Contents: 15 Sockets in cardboard box. Includes Socket Bar 16-835
and (20) Socket Clips 16-845. Approximate Weight, 4.30 lbs.

Set 15-561
15 Pc. 6 Point 1/2" Drive Socket Set with
Plastic Socket Rail
Contents: 15 Sockets in cardboard box. Includes (2) Plastic Socket
Rail 16-836 and (15) Socket Clips 16-848. Approximate Weight,
4.30 lbs.
6-pt. Std. Length Sockets

Product Opening, Product Opening, Product Opening,

Number Inches Number Inches Number Inches
12-012 3/8 12-022 11/16 12-032 1
1/2" Drive

12-014 7/16 12-024 3/4 12-034 1-1/16

12-016 1/2 12-026 13/16 12-036 1-1/8
12-018 9/16 12-028 7/8 12-038 1-3/16
12-020 5/8 12-030 15/16 12-040 1-1/4

Set 15-521A
Socket Sets

14 Pc. 6 Point 1/2" Drive Socket Set

Contents: 14 Sockets in cardboard box. Includes Socket Bar and
Socket Clips. Approximate Weight, 3.15 lbs
6-pt. Std. Length Sockets
Product Opening, Product Opening, Product Opening,
Number Inches Number Inches Number Inches
12-012A 3/8 12-022A 11/16 12-032A 1
12-014A 7/16 12-024A 3/4 12-034A 1-1/16
12-016A 1/2 12-026A 13/16 12-036A 1-1/8
12-018A 9/16 12-028A 7/8 12-040A 1-1/4
12-020A 5/8 12-030A 15/16

Set 15-565
19 Pc. 12 Point Deep 1/2" Drive Socket Set
Contents: 19 Sockets in cardboard box. Includes Socket Bars 16-831 and
16-835 and (20) Socket Clips 16-845. Approximate Weight, 5.67 lbs.
12-pt. Deep Sockets
Product Opening, Product Opening, Product Opening,
Number Inches Number Inches Number Inches
12-312 3/8 12-326 13/16 12-340 1-1/4
12-314 7/16 12-328 7/8 12-342 1-5/16
12-316 1/2 12-330 15/16 12-344 1-3/8
12-318 9/16 12-332 1 12-346 1-7/16
12-320 5/8 12-334 1-1/16 12-348 1-1/2
12-322 11/16 12-336 1-1/8
12-324 3/4 12-338 1-3/16

3-47 Always wear eye protection when near tools in use.

 3
1/2" Drive

Set 15-570
19 Pc. 6 Point Deep 1/2" Drive Socket Set
Contents: 19 Sockets in cardboard box. Includes Socket Bars 16-831 and
16-835 and (20) Socket Clips 16-845. Approximate Weight, 10.02 lbs.
6-pt. Deep Sockets
Product Opening, Product Opening, Product Opening,
Number Inches Number Inches Number Inches
12-212 3/8 12-226 13/16 12-240 1-1/4
12-214 7/16 12-228 7/8 12-242 1-5/16
12-216 1/2 12-230 15/16 12-244 1-3/8
12-218 9/16 12-232 1 12-246 1-7/16
12-220 5/8 12-234 1-1/16 12-248 1-1/2
12-222 11/16 12-236 1-1/8
12-224 3/4 12-238 1-3/16

Set 15-575

Socket Sets
15 Pc. 12 Point Deep 1/2" Drive Socket Set
Contents: 15 Sockets in cardboard box. Includes Socket Bar 16-835
and (20) Socket Clips 16-845. Approximate Weight, 5.67 lbs.
12-pt. Deep Sockets
Product Opening, Product Opening, Product Opening,
Number Inches Number Inches Number Inches
12-312 3/8 12-322 11/16 12-332 1
12-314 7/16 12-324 3/4 12-334 1-1/16
12-316 1/2 12-326 13/16 12-336 1-1/8
12-318 9/16 12-328 7/8 12-338 1-3/16
12-320 5/8 12-330 15/16 12-340 1-1/4

1/2" Drive
Set 15-580
15 Pc. 6 Point Deep 1/2" Drive Socket Set
Contents: 15 Sockets in cardboard box. Includes Socket Bar 16-835
and (20) Socket Clips 16-845. Approximate Weight, 7.03 lbs.
6-pt. Deep Sockets
Product Opening, Product Opening, Product Opening,
Number Inches Number Inches Number Inches
12-212 3/8 12-222 11/16 12-232 1
12-214 7/16 12-224 3/4 12-234 1-1/16
12-216 1/2 12-226 13/16 12-236 1-1/8
12-218 9/16 12-228 7/8 12-238 1-3/16
12-220 5/8 12-230 15/16 12-240 1-1/4

3-48
 3
1/2" Drive

Set 15-585
10 Pc. 8 Point 1/2" Drive Socket Set
Contents 10 Sockets in cardboard box. Includes Socket Bar 16-834
and (10) Socket Clips 16-845. Approximate Weight, 3.61 lbs.
8-pt. Std. Length Sockets
Product Opening, Product Opening, Product Opening,
Number Inches Number Inches Number Inches
12-412 3/8 12-420 5/8 12-428 7/8
12-414 7/16 12-422 11/16 12-432 1
12-416 1/2 12-424 3/4
12-418 9/16 12-426 13/16

Set 15-590
5 Pc. 12 Point 1/2" Drive Universal Socket Set
Contents: 5 Sockets in cardboard box. Includes Socket Bar 16-831
1/2" Drive

and (10) Socket Clips 16-845. Approximate Weight, 1.82 lbs.

12-pt. Universal Sockets
Product Opening, Product Opening,
Number Inches Number Inches
12-516 1/2 12-522 11/16
12-518 9/16 12-524 3/4
Socket Sets

12-520 5/8

Set 15-595
7 Pc. 1/2" Drive Crowfoot Wrench Set
Contents: 7 Crowfoot Wrenches in cardboard box. Includes Socket Bar
16-835 and (10) Socket Clips 16-845. Approximate Weight, 1.76 lbs.
Open End Crowfoot Wrenches
Product Opening, Product Opening,
Number Inches Number Inches
12-859 15/16 12-863 1-1/4
12-860 1 12-866 1-7/16
12-861 1-1/16 12-867 1-1/2
12-862 1-1/8

Set 15-600
15 Pc. 1/2" Drive Flare Nut Crowfoot Wrench Set
Contents: 15 Flare Nut Crowfoot Wrenches in cardboard box.
Includes (2) Socket Bars 16-835 and (20) Socket Clips 16-845.
Approximate Weight, 4.80 lbs.
Flare Nut Crowfoot Wrenches
Product Opening, Product Opening, Product Opening,
Number Inches Number Inches Number Inches
12-840 1-1/8 12-845 1-7/16 12-850 1-3/4
12-841 1-3/16 12-846 1-1/2 12-851 1-13/16
12-842 1-1/4 12-847 1-9/16 12-852 1-7/8
12-843 1-5/16 12-848 1-5/8 12-853 1-15/16
12-844 1-3/8 12-849 1-11/16 12-854 2

3-49 Always wear eye protection when near tools in use.

 3
1/2" Drive

Set 15-605
6 Pc. 1/2" Drive Extra Long Hex Driver Socket Set
Contents: 6 Hex Drivers in cardboard box. Includes Socket Bar
16-831 and (10) Socket Clips 16-845. Approximate Weight, 2.67 lbs.
Hex Driver Sockets with Extra Long Bits
Product Opening, Replacement Product Opening, Replacement
Number Inches Bit Part # Number Inches Bit Part #
12-753 1/4 94-253 12-757 1/2 94-257
12-754 5/16 94-254 12-758 9/16 94-258
12-755 3/8 94-255 12-759 5/8 94-259

Set 15-610
7 Pc. 1/2" Drive Hex Driver Socket Set

Socket Sets
Contents: 7 Hex Drivers in cardboard box. Includes Socket Bar
16-831 and (10) Socket Clips 16-845. Approximate Weight, 2.71 lbs.
Hex Driver Sockets with Std. Length Bits
Product Opening, Replacement Product Opening, Replacement
Number Inches Bit Part # Number Inches Bit Part #
12-713 1/4 94-213 12-717 1/2 94-217
12-714 5/16 94-214 12-718 9/16 94-218
12-715 3/8 94-215 12-719 5/8 94-219
12-716 7/16 94-216

1/2" Drive
Set 15-615
6 Pc. 1/2" Drive Torx® Driver Socket Set
Contents: 6 Torx Drivers in cardboard box. Includes Socket Bar
16-831 and (10) Socket Clips 16-845. Approximate Weight, 1.60 lbs.
Tor x Driver Sockets
Product Tor x Replacement Product Tor x Replacement
Number Size Bit Part # Number Size Bit Part #
12-878 T27 94-178 12-884 T45 94-184
12-880 T30 94-180 12-886 T50 94-186
12-882 T40 94-182 12-888 T55 94-188
TORX® is the registered trademark of Acument Intellectual Properties, LLC.

Set 15-620
7 Pc. 1/2" Drive Screwdriver Socket Set
Contents: 7 Screwdriver Sockets in cardboard box. Includes Socket
Bar 16-831 and (10) Socket Clips 16-845. Approximate Weight
1.49 lbs.
Slotted Phillips
Screwdriver Sockets Screwdriver Sockets
Product Opening, Replacement Product Opening, Replacement
Number Inches Bit Part # Number Inches Bit Part #
12-802 1/4 x 1/32 94-102 12-821 #1 94-121
12-803 5/16 x 3/64 94-103 12-822 #2 94-122
12-805 3/8 x 1/16 94-105 12-825 #3 94-125
12-828 #4 94-128

3-50
 3
1/2" Drive

Set 20-650
15 Pc. 12 Point 1/2" Drive Black Oxide Socket Set
Contents: 15 Sockets in cardboard box. Includes Socket Bars
16-831 and 16-832 and (20) Socket Clips 16-845. Approximate
Weight, 6.82 lbs.
12-pt. Std. Length Black Oxide Sockets
Product Opening, Product Opening,
Number Inches Number Inches
20-112 3/8 20-128 7/8
20-114 7/16 20-130 15/16
20-116 1/2 20-132 1
20-118 9/16 20-134 1-1/16
20-120 5/8 20-136 1-1/8
20-122 11/16 20-140 1-1/4
20-124 3/4 20-148 1-1/2
20-126 13/16
1/2" Drive

Set 20-660
14 Pc. 12 Point Deep 1/2" Drive Black Oxide
Socket Set
Contents: 14 Sockets in cardboard box. Includes Socket Bar 16-835
Socket Sets

and (20) Socket Clips 16-845. Approximate Weight, 6.12 lbs.

12-pt. Deep Black Oxide Sockets
Product Opening, Product Opening,
Number Inches Number Inches
20-312 3/8 20-326 13/16
20-314 7/16 20-328 7/8
20-316 1/2 20-330 15/16
20-318 9/16 20-332 1
20-320 5/8 20-334 1-1/16
20-322 11/16 20-336 1-1/8
20-324 3/4 20-340 1-1/4

3-51 Always wear eye protection when near tools in use.

 3
1/2" Drive

Set 44-500 METRIC

54 Pc. 12 Point 1/2” Drive Socket Set with Box
In 6 Drawer Top Chest 16-880.

Set 44-505 METRIC

54 Pc. 12 Point 1/2” Drive Socket Set; Tools Only
No Chest; Tools Only
Contents: 45 Sockets, 9 Drive Tools.
Approximate Weight, 53.21 lbs. (18.10 kg)
12-pt. Std. Length Sockets 12-pt. Deep Sockets
Product Opening, Product Opening,
Number mm Number mm
39-110 10 39-310 10
39-111 11 39-311 11
39-112 12 39-312 12

Socket Sets
39-113 13 39-313 13
39-114 14 39-314 14
39-115 15 39-315 15
39-116 16 39-316 16
39-117 17 39-317 17
39-118 18 39-318 18
39-119 19 39-319 19
39-120 20 39-320 20
39-121 21 39-321 21
39-122 22 39-322 22
39-123 23 39-324 24
39-124 24 39-325 25
39-125 25 39-326 26
39-126 26

1/2" Drive
39-127 27 Drive Tools:
39-128 28 Product
39-129 29 Number Description
39-130 30 12-918 Breaker Bar, 1/2" Dr, 17"
39-132 32 12-921 Extension, 1/2" Dr, 2-1/2"
39-136 36 12-923 Extension, 1/2" Dr, 5"
12-924 Extension, 1/2" Dr, 10"
Hex Driver Sockets 12-935 Speeder, 1/2" Dr
Product Opening, 12-938 T-Handle, 1/2" Dr
Number mm 12-947 Universal Joint, 1/2" Dr
39-711 6 12-972 Ratchet, 1/2" Dr, 10-1/2"
39-713 8 12-973 Ratchet, 1/2" Dr, 15"
39-715 10
39-717 12
39-719 14
39-722 17

3-52
 3
1/2" Drive

Set 44-510 METRIC

31 Pc. 12 Point 1/2" Drive Socket Set
Contents: 27 Sockets, 4 Drive Tools. In Case 16-629.
Approximate Weight, 20.46 lbs. (9.28 kg)
12-pt. Std. Length Sockets 12-pt. Deep Sockets
Product Opening, Product Opening,
Number mm Number mm
39-110 10 39-316 16
39-111 11 39-317 17
39-112 12 39-318 18
39-113 13 39-319 19
39-114 14 39-320 20
39-115 15 39-321 21
39-116 16 39-322 22
39-117 17 39-324 24
39-118 18 39-325 25
39-119 19 39-326 26
39-120 20
1/2" Drive

39-121 21 Drive Tools:

39-122 22 Product
39-123 23 Number Description
39-124 24 12-918 Breaker Bar, 1/2" Dr, 17"
39-125 25 12-923 Extension, 1/2" Dr, 5"
39-126 26 12-924 Extension, 1/2" Dr, 10"
12-972 Ratchet, 1/2" Dr, 10-1/2"
Socket Sets

Set 44-515 METRIC

29 Pc. 12 Point 1/2" Drive Socket Set
Contents: 23 Sockets, 6 Drive Tools. In Case 16-629.
Approximate Weight, 18.79 lbs. (8.52 kg)
12-pt. Std. Length Sockets
Product Opening, Product Opening,
Number mm Number mm
39-110 10 39-127 27
39-111 11 39-128 28
39-112 12 39-129 29
39-113 13 39-130 30
39-114 14 39-132 32
39-115 15 39-136 36
39-116 16
39-117 17 Drive Tools:
39-118 18
39-119 19 Product
39-120 20 Number Description
39-121 21 12-918 Breaker Bar, 1/2" Dr, 17"
39-122 22 12-921 Extension, 1/2" Dr, 2-1/2"
39-123 23 12-923 Extension, 1/2" Dr, 5"
39-124 24 12-924 Extension, 1/2" Dr, 10"
39-125 25 12-947 Universal Joint, 1/2" Dr
39-126 26 12-972 Ratchet, 1/2" Dr, 10-1/2"

3-53 Always wear eye protection when near tools in use.

 3
1/2" Drive

Set 44-516A METRIC

23 Pc. 12 Point 1/2" Drive Socket Set
Contents: 19 Sockets, 4 Drive Tools. In Case.
Approximate Weight, 13.25 lbs. (6,010 g)
12-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number mm Number Description
39-109A 9 12-923A Extension, 1/2" Dr, 6"
39-110A 10 12-924A Extension, 1/2" Dr, 10"
39-111A 11 12-917A Flex Handle, 1/2" Dr, 15"
39-112A 12 12-967A Quick Release Ratchet,
39-113A 13 1/2" Dr
39-114A 14
39-115A 15
39-116A 16
39-117A 17
39-118A 18

Socket Sets
39-119A 19
39-120A 20
39-121A 21
39-122A 22
39-123A 23
39-124A 24
39-127A 27
39-130A 30
39-132A 32

Set 44-520 METRIC

1/2" Drive
22 Pc. 12 Point 1/2" Drive Socket Set
Contents: 17 Sockets, 5 Drive Tools. In Case 16-629.
Approximate Weight, 15.04 lbs. (6,828 g)
12-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number mm Number Description
39-110 10 12-918 Breaker Bar, 1/2" Dr, 17"
39-111 11 12-923 Extension, 1/2" Dr, 5"
39-112 12 12-924 Extension, 1/2" Dr, 10"
39-113 13 12-947 Universal Joint, 1/2" Dr
39-114 14 12-972 Ratchet, 1/2" Dr, 10-1/2"
39-115 15
39-116 16
39-117 17
39-118 18
39-119 19
39-120 20
39-121 21
39-122 22
39-123 23
39-124 24
39-125 25
39-126 26

3-54
 3
1/2" Drive

Set 44-525 METRIC

16 Pc. 12 Point 1/2" Drive Socket Set
Contents: 14 Sockets, 2 Drive Tools. In Case 16-623.
Approximate Weight, 7.09 lbs. (3,219 g)
12-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number mm Number Description
39-110 10 12-923 Extension, 1/2" Dr, 5"
39-111 11 12-972 Ratchet, 1/2" Dr, 10-1/2"
39-112 12
39-113 13
39-114 14
39-115 15
39-116 16
39-117 17
39-118 18
39-119 19
39-120 20
1/2" Drive

39-121 21
39-122 22
39-123 23
Socket Sets

3-55 Always wear eye protection when near tools in use.

 3
1/2" Drive

Set 44-530 METRIC

23 Pc. 12 Point 1/2" Drive Socket Set
Contents: 23 Sockets in cardboard box. Includes Sockets Bars
16-834 and 16-835 and (30) Socket Clips 16-845. Approximate
Weight, 7.69 lbs. (3,491 g)
12-pt. Std. Length Sockets
Product Opening, Product Opening, Product Opening,
Number mm Number mm Number mm
39-110 10 39-118 18 39-126 26
39-111 11 39-119 19 39-127 27
39-112 12 39-120 20 39-128 28
39-113 13 39-121 21 39-129 29
39-114 14 39-122 22 39-130 30
39-115 15 39-123 23 39-132 32
39-116 16 39-124 24 39-136 36
39-117 17 39-125 25

Socket Sets
Set 44-535 METRIC
23 Pc. 6 Point 1/2" Drive Socket Set
Contents: 23 Sockets in cardboard box. Includes Socket Bar 16-834 and
16-835 and (30) Socket Clips 16-845. Approximate Weight, 4.82 lbs.
(2186 g)
6-pt. Std. Length Sockets
Product Opening, Product Opening, Product Opening,
Number mm Number mm Number mm

1/2" Drive
39-010 10 39-018 18 39-026 26
39-011 11 39-019 19 39-027 27
39-012 12 39-020 20 39-028 28
39-013 13 39-021 21 39-029 29
39-014 14 39-022 22 39-030 30
39-015 15 39-023 23 39-032 32
39-016 16 39-024 24 39-036 36
39-017 17 39-025 25

Set 44-540 METRIC

15 Pc. 12 Point 1/2" Drive Socket Set
Contents: 15 Sockets in cardboard box. Includes Socket Bar 16-835
and (20) Socket Clips 16-845. Approximate Weight, 3.56 lbs. (1,616 g)
12-pt. Std. Length Sockets
Product Opening, Product Opening, Product Opening,
Number mm Number mm Number mm
39-110 10 39-115 15 39-120 20
39-111 11 39-116 16 39-121 21
39-112 12 39-117 17 39-122 22
39-113 13 39-118 18 39-123 23
39-114 14 39-119 19 39-124 24

3-56
 3
1/2" Drive

Set 44-545 METRIC

15 Pc. 6 Point 1/2" Drive Socket Set
Contents: 15 Sockets in cardboard box. Includes Socket Bar 16-835
and (20) Socket Clips 16-845. Approximate Weight, 3.70 lbs. (1,680 g)

Set 44-546 METRIC

15 Pc. 6 Point 1/2" Drive Socket Set with Plastic
Socket Rail
Contents: 15 Sockets in cardboard box. Includes Plastic Socket Rail
16-837 and (15) Socket Clips 16-848. Approximate Weight, 3.70 lbs.
(1,680 g)
6-pt. Std. Length Sockets
Product Opening, Product Opening, Product Opening,
Number mm Number mm Number mm
39-010 10 39-015 15 39-020 20
1/2" Drive

39-011 11 39-016 16 39-021 21

39-012 12 39-017 17 39-022 22
39-013 13 39-018 18 39-023 23
39-014 14 39-019 19 39-024 24
Socket Sets

Set 44-550 METRIC

22 Pc. 12 Point Deep 1/2" Drive Socket Set
Contents: 22 Sockets in cardboard box. Includes Socket Bars 16-834
and 16-835 and (30) Socket Clips 16-845. Approximate Weight,
9.00 lbs. (4082 g)
12-pt. Deep Sockets
Product Opening, Product Opening, Product Opening,
Number mm Number mm Number mm
39-310 10 39-318 18 39-326 26
39-311 11 39-319 19 39-327 27
39-312 12 39-320 20 39-328 28
39-313 13 39-321 21 39-329 29
39-314 14 39-322 22 39-330 30
39-315 15 39-323 23 39-332 32
39-316 16 39-324 24
39-317 17 39-325 25

3-57 Always wear eye protection when near tools in use.

 3
1/2" Drive

Set 44-555 METRIC

15 Pc. 12 Point Deep 1/2” Drive Socket Set
Contents: 15 Sockets in cardboard box. Includes Socket Bar 16-835
and (20) Socket Clips 16-845. Approximate Weight, 4.49 lbs. (2037 g)
12-pt. Deep Sockets
Product Opening, Product Opening,
Number mm Number mm
39-310 10 39-318 18
39-311 11 39-319 19
39-312 12 39-320 20
39-313 13 39-321 21
39-314 14 39-322 22
39-315 15 39-323 23
39-316 16 39-324 24
39-317 17

Socket Sets
Set 44-560 METRIC
6 Pc. 1/2” Drive Extra Long Hex Driver Socket Set
Contents: 6 Hexdriver Sockets in cardboard box. Includes Socket
Bar 16-831 and (10) Socket Clips 16-845. Approximate Weight,
2.67 lbs. (1,212 g)
Hex Driver Sockets with Extra Long Bits
Product Opening, Replacement Product Opening, Replacement
Number mm Bit Part # Number mm Bit Part #
39-751 6 94-351 39-757 12 94-757
39-753 8 94-353 39-759 14 94-759
39-755 10 94-355 39-762 17 94-762

1/2" Drive
Set 44-565 METRIC
6 Pc. 1/2” Drive Hex Driver Socket Set
Contents: 6 Hex Drivers in cardboard box. Includes Socket Bar 16-831
and (10) Socket Clips 16-845. Approximate Weight, 2.31 Ibs. (1,048 g)
Hex Driver Sockets
Product Opening, Replacement Product Opening, Replacement
Number mm Bit Part # Number mm Bit Part #
39-711 6 94-711 39-717 12 94-717
39-713 8 94-713 39-719 14 94-719
39-715 10 94-715 39-722 17 94-722

3-58
 3
3/4" Drive

Set 15-700
42 Pc. 12 Point 3/4" Drive Socket Set
Contents: 35 Sockets, 7 Drive Tools. In Case 16-657.
Approximate Weight, 92.62 lbs.
12-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number Inches Number Description
13-124 3/4 13-972 Ratchet, 3/4" Dr, 19"
13-126 13/16 13-918 Breaker Bar, 3/4" Dr, 22"
13-128 7/8 13-922 Extension, 3/4" Dr, 5"
13-130 15/16 13-923 Extension, 3/4" Dr, 8"
13-132 1 13-925 Extension, 3/4" Dr, 16"
13-134 1-1/16 13-938 T-Handle, 3/4" Dr
13-136 1-1/8 13-947 Universal Joint, 3/4" Dr
13-138 1-3/16
13-140 1-1/4
13-142 1-5/16
13-144 1-3/8
3/4" Drive

13-146 1-7/16
13-148 1-1/2
13-150 1-9/16
13-152 1-5/8
13-154 1-11/16
13-156 1-3/4
13-158 1-13/16
Socket Sets

13-160 1-7/8
13-164 2
13-168 2-1/8
13-170 2-3/16
13-172 2-1/4
13-176 2-3/8
12-pt. Deep Sockets
Product Opening,
Number Inches
13-328 7/8
13-330 15/16
13-332 1
13-334 1-1/16
13-336 1-1/8
13-340 1-1/4
13-342 1-5/16
13-344 1-3/8
13-346 1-7/16
13-348 1-1/2
13-352 1-5/8

3-59 Always wear eye protection when near tools in use.

 3
3/4" Drive

Set 15-705
29 Pc. 12 Point 3/4" Drive Socket Set
Contents: 22 Sockets, 7 Drive Tools. In Case 16-657.
Approximate Weight, 74.21 lbs.

12-pt. Std. Length Sockets Drive Tools:

Product Opening, Product
Number Inches Number Description
13-128 7/8 13-972 Ratchet, 3/4" Dr, 19"
13-130 15/16 13-918 Breaker Bar, 3/4" Dr, 22"
13-132 1 13-922 Extension, 3/4" Dr, 5"
13-134 1-1/16 13-923 Extension, 3/4" Dr, 8"
13-136 1-1/8 13-925 Extension, 3/4" Dr, 16"
13-138 1-3/16 13-938 T-Handle, 3/4" Dr
13-140 1-1/4 13-947 Universal Joint, 3/4" Dr
13-142 1-5/16
13-144 1-3/8

Socket Sets
13-146 1-7/16
13-148 1-1/2
13-150 1-9/16
13-152 1-5/8
13-154 1-11/16
13-156 1-3/4
13-158 1-13/16
13-160 1-7/8
13-164 2
13-168 2-1/8
13-170 2-3/16
13-172 2-1/4
13-176 2-3/8

3/4" Drive
Set 15-710
20 Pc. 12 Point 3/4" Drive Socket Set
Contents: 15 Sockets, 5 Drive Tools. In Case 16-641.
Approximate Weight, 51.98 lbs.
12-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number Inches Number Description
13-128 7/8 13-972 Ratchet, 3/4" Dr, 19
13-130 15/16 13-918 Breaker Bar, 3/4" Dr, 22"
13-132 1 13-923 Extension, 3/4" Dr, 8"
13-134 1-1/16 13-925 Extension, 3/4" Dr, 16"
13-136 1-1/8 13-938 T-Handle, 3/4" Dr.
13-140 1-1/4
13-142 1-5/16
13-144 1-3/8
13-146 1-7/16
13-148 1-1/2
13-152 1-5/8
13-156 1-3/4
13-158 1-13/16
13-160 1-7/8
13-164 2

3-60
 3
3/4" Drive

Set 15-715
13 Pc. 12 Point 3/4" Drive Socket Set
Contents: 11 Sockets, 2 Drive Tools. In Case 16-641.
Approximate Weight, 74.21 lbs.
12-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number Inches Number Description
13-128 7/8 13-972 Ratchet, 3/4" Dr, 19
13-130 15/16 13-923 Extension, 3/4" Dr, 8"
13-132 1
13-134 1-1/16
13-136 1-1/8
13-138 1-3/16
13-140 1-1/4
13-142 1-5/16
13-144 1-3/8
13-146 1-7/16
13-148 1-1/2
1/4" Drive

Set 15-735
16 Pc. 12 Point 3/4" Drive Socket Set
Socket Sets

Contents; 16 Sockets in cardboard box. Includes (2) Socket Bars

16-835 and (20) Socket Clips 16-847. Approximate Weight,
20.64 lbs.
12-pt. Std. Length Sockets
Product Opening, Product Opening, Product Opening,
Number Inches Number Inches Number Inches
13-128 7/8 13-142 1-5/16 13-156 1-3/4
13-130 15/16 13-144 1-3/8 13-158 1-13/16
13-132 1 13-146 1-7/16 13-160 1-7/8
13-134 1-1/16 13-148 1-1/2 13-164 2
13-136 1-1/8 13-152 1-5/8
13-140 1-1/4 13-154 1-11/16

Set 15-740
11 Pc. 12 Point Deep 3/4" Drive Socket Set
Contents: 11 Sockets in cardboard box. Includes Socket Bars
16-831 and 16-832 and (20) Socket Clips 16-847. Approximate
Weight, 14.56 lbs.
12-pt. Deep Sockets
Product Opening, Product Opening, Product Opening,
Number Inches Number Inches Number Inches
13-328 7/8 13-336 1-1/8 13-346 1-7/16
13-330 15/16 13-340 1-1/4 13-348 1-1/2
13-332 1 13-342 1-5/16 13-352 1-5/8
13-334 1-1/16 13-344 1-3/8

3-61 Always wear eye protection when near tools in use.

 3
3/4" Drive

Set 44-700 METRIC

43 Pc. 12 Point 3/4" Drive Socket Set
Contents: 36 Sockets, 7 Drive Tools. In Case 16-657.
Approximate Weight, 90.82 lbs. (41.19 kg)
12-pt. Std. Length Sockets 12-pt. Deep Sockets
Product Opening, Product Opening,
Number mm Number mm
40-119 19 40-322 22
40-120 20 40-323 23
40-121 21 40-324 24
40-122 22 40-327 27
40-123 23 40-330 30
40-124 24 40-332 32
40-125 25 40-335 35
40-126 26 40-336 36
40-127 27 40-338 38
40-128 28 40-341 41

Socket Sets
40-129 29 40-346 46
40-130 30 40-350 50
40-132 32
40-135 35
40-136 36 Drive Tools:
40-138 38 Product
40-141 41 Number Description
40-142 42 13-972 Ratchet, 3/4" Dr, 19"
40-146 46 13-918 Breaker Bar, 3/4" Dr, 22"
40-150 50 13-922 Extension, 3/4" Dr, 5"
40-154 54 13-923 Extension, 3/4" Dr, 8"
40-155 55 13-925 Extension, 3/4" Dr, 16"
40-158 58 13-938 T-Handle, 3/4" Dr
40-160 60 13-947 Universal Joint, 3/4" Dr

3/4" Drive
Set 44-705 METRIC
28 Pc. 12 Point 3/4" Drive Socket Set
Contents: 22 Sockets, 6 Drive Tools. In Case 16-657.
Approximate Weight, 64.06 lbs. (29.05 kg)
12-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number mm Number Description
40-121 21 13-972 Ratchet, 3/4" Dr, 19”
40-122 22 13-918 Breaker Bar, 3/4" Dr, 22"
40-123 23 13-922 Extension, 3/4" Dr 5"
40-124 24 13-923 Extension, 3/4" Dr, 8”
40-125 25 13-938 T-Handle, 3/4" Dr
40-126 26 13-947 Universal Joint, 3/4" Dr
40-127 27
40-128 28
40-129 29
40-130 30
40-132 32
40-135 35
40-136 36
40-138 38
40-141 41
40-142 42
40-146 46
40-150 50
40-154 54
40-155 55
40-158 58
40-160 60

3-62
 3
3/4" Drive

Set 44-710 METRIC

19 Pc. 12 Point 3/4" Drive Socket Set
Contents: 15 Sockets, 4 Drive Tools. In Case 16-641.
Approximate Weight, 47.87 lbs. (21.71 kg)
12-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number mm Number Description
40-123 23 13-972 Ratchet, 3/4" Dr, 19”
40-124 24 13-918 Breaker Bar, 3/4" Dr, 22"
40-125 25 13-923 Extension, 3/4" Dr, 8"
40-126 26 13-925 Extension, 3/4" Dr, 16"
40-127 27
40-128 28
40-129 29
40-130 30
40-132 32
40-135 35
40-136 36
3/4" Drive

40-138 38
40-141 41
40-142 42
40-146 46
Socket Sets

Set 44-715 METRIC

17 Pc. 12 Point 3/4" Drive Socket Set
Contents: 17 Sockets in cardboard box. Includes (2) Socket Bars
16-835 and (20) Socket Clips 16-847. Approximate Weight, 18.34
lbs. (8.32 kg).
12-pt. Std. Length Sockets
Product Opening, Product Opening, Product Opening,
Number mm Number mm Number mm
40-122 22 40-128 28 40-138 38
40-123 23 40-129 29 40-141 41
40-124 24 40-130 30 40-142 42
40-125 25 40-132 32 40-146 46
40-126 26 40-135 35 40-150 50
40-127 27 40-136 36

Set 44-720 METRIC

12 Pc. 12 Point Deep 3/4" Drive Socket Set
Contents: 12 Sockets in cardboard box. Includes Socket Bars
16-832 and 16-834, and (20) Socket Clips 16-847. Approximate
Weight, 21.13 lbs. (9.58 kg)
12-pt. Deep Sockets
Product Opening, Product Opening, Product Opening,
Number mm Number mm Number mm
40-322 22 40-330 30 40-338 38
40-323 23 40-332 32 40-341 41
40-324 24 40-335 35 40-346 46
40-327 27 40-336 36 40-350 50

3-63 Always wear eye protection when near tools in use.

 3
1" Drive

Set 15-800
29 Pc. 12 Point 1" Drive Socket Set
Contents: 23 Sockets, 6 Drive Tools. In Case 16-659.
Approximate Weight, 148.11 lbs.
12-pt. Std. Length Sockets
Product Opening, Product Opening,
Number Inches Number Inches
14-134 1-1/16 14-184 2-5/8
14-136 1-1/8 14-188 2-3/4
14-140 1-1/4 14-194 2-15/16
14-142 1-5/16 14-196 3
14-144 1-3/8 14-200 3-1/8
14-146 1-7/16 14-212 3-1/2
14-148 1-1/2
14-152 1-5/8 Drive Tools
14-158 1-13/16
14-160 1-7/8 Product

Socket Sets
14-164 2 Number Description
14-168 2-1/8 14-906 Ratchet, 1" Dr, 30"
14-170 2-3/16 14-918 Breaker Bar, 1" Dr, 27"
14-172 2-1/4 14-924 Extension, 1" Dr, 9"
14-176 2-3/8 14-926 Extension, 1" Dr, 18"
14-180 2-1/2 14-939 Sliding Handle, 1" Dr
14-182 2-9/16 14-940 Adapter for 14-939

1" Drive
Set 15-805
22 Pc. 12 Point 1" Drive Socket Set
Contents: 16 Sockets, 6 Drive Tools. In Case 16-659.
Approximate Weight, 108.49 lbs.
12-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number Inches Number Description
14-148 1-1/2 14-906 Ratchet, 1" Dr, 30"
14-152 1-5/8 14-918 Breaker Bar, 1" Dr, 27"
14-158 1-13/16 14-924 Extension, 1" Dr, 9"
14-160 1-7/8 14-926 Extension, 1" Dr, 18"
14-164 2 14-939 Sliding Handle, 1" Dr
14-170 2-3/16 14-940 Adapter for 14-939
14-172 2-1/4
14-176 2-3/8
14-180 2-1/2
14-182 2-9/16
14-184 2-5/8
14-188 2-3/4
14-194 2-15/16
14-196 3
14-200 3-1/8
14-212 3-1/2

3-64
 3
1" Drive

Set 15-810
17 Pc. 12 Point 1" Drive Socket Set
Contents: 13 Sockets, 4 Drive Tools. In Case 16-641. Approximate
Weight, 64.00 lbs.
12-pt. Std. Length Sockets Drive Tools:
Product Opening, Product
Number Inches Number Description
14-134 1-1/16 14-906 Ratchet, 1" Dr, 30"
14-136 1-1/8 14-918 Breaker Bar, 1" Dr, 27"
14-140 1-1/4 14-924 Extension, 1" Dr, 9"
14-142 1-5/16 14-926 Extension, 1" Dr, 18"
14-144 1-3/8
14-146 1-7/16
14-148 1-1/2
14-152 1-5/8
14-154 1-11/16
14-156 1-3/4
14-158 1-13/16
1" Drive

14-160 1-7/8
14-164 2
Socket Sets

3-65 Always wear eye protection when near tools in use.

 HAND SOCKETS AND DRIVE TOOLS 4
Chrome Sockets 1/4” to 1” Drive
ACCESS Black Oxide Sockets 3/8” to 1/2” Drive
Thin wall design with precise Ratchets 1/4” to 1-1/2” Drive
nut end dimensions meet
STRENGTH Drive Tools 1/4” to 1-1/2” Drive
industrial specifications
Radius corner design provides 15-20%
more torque, extends fastener life Hex Driver Sockets 1/4” to 1/2” Drive
and reduces slippage Screwdriver Sockets 1/4” to 1/2” Drive
Crowfoot Wrenches 3/8” to 1/2” Drive
SPEED
markings optimize size identification,
tion,
and provide SAE / Metric differentiation

ACCESS
Compact head design
for use in confined areas
SAFETY
Recessed reversing lever
has On/Off markings

STRENGTH
SAFETY SAFETY Torque wrap design reduces
Unique concave handle shape Single pawl, double tooth stress on gear and pawl teeth
reduces fatigue and improves design will not operate in
comfort the neutral position

ACCESS
Low profile head design
for use in confined areas

SAFETY
Recessed reversing lever STRENGTH
has On/Off markings Unique enclosed head (no screws)
with two O-rings resists contaminants
for extreme stength and long life

STRENGTH & ACCESS

New design combines the strength SAFETY
of a teardrop head with the 6° Improved modified hour-glass handle
ratcheting arc of a round head for maximum comfort, minimal fatigue
 4
1/4" Drive

1/4” Drive 12 Point Standard Length Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches Lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
10-106 3/16 0.02 0.442 0.309 0.876 0.193 0.200 0.436
10-107 7/32 0.02 0.442 0.344 0.876 0.224 0.200 0.436
10-108 1/4 0.02 0.442 0.382 0.876 0.225 0.210 0.436
10-109 9/32 0.02 0.442 0.423 0.876 0.225 0.220 0.436
10-110 5/16 0.02 0.463 0.463 0.876 0.208 0.290 -
10-111 11/32 0.03 0.501 0.501 0.876 0.208 0.310 -
1/4" Drive

10-112 3/8 0.03 0.546 0.546 0.876 0.381 0.500 -

10-114 7/16 0.03 0.613 0.613 0.876 0.443 0.500 -
10-116 1/2 0.04 0.678 0.678 0.876 0.507 0.500 -
10-118 9/16 0.07 0.777 0.777 0.876 0.570 0.500 -
ASME B107.1 Fed’l Spec. GGG-W-641e
Hand Sockets and Drive Tools

1/4” Drive 6 Point Standard Length Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches Lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
10-004 1/8 0.09 0.446 0.234 0.876 0.094 0.094 0.436
10-005 5/32 0.09 0.446 0.274 0.876 0.120 0.160 0.436
10-006 3/16 0.02 0.446 0.309 0.876 0.150 0.200 0.436
10-007 7/32 0.02 0.446 0.344 0.876 0.150 0.200 0.436
10-008 1/4 0.02 0.446 0.383 0.876 0.200 0.210 0.436
10-009 9/32 0.02 0.446 0.423 0.876 0.180 0.220 0.436
10-010 5/16 0.02 0.463 0.463 0.876 0.208 0.290 -
10-011 11/32 0.03 0.502 0.502 0.876 0.208 0.310 -
10-012 3/8 0.03 0.546 0.546 0.876 0.434 0.500 -
10-014 7/16 0.04 0.613 0.613 0.876 0.443 0.500 -
10-016 1/2 0.05 0.678 0.678 0.876 0.507 0.500 -
10-018 9/16 0.07 0.697 0.697 0.876 0.570 0.463 -
ASME B107.1 Fed'l Spec. GGG-W-641e

4-1 Always wear eye protection when near tools in use.

 4
1/4" Drive

1/4” Drive 12 Point Deep Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches Lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
10-306 3/16 0.04 0.446 0.309 2.000 0.300 0.190 0.880
10-307 7/32 0.05 0.446 0.350 2.000 0.300 0.190 0.880
10-308 1/4 0.05 0.446 0.391 2.000 0.257 0.190 0.880
10-309 9/32 0.05 0.446 0.432 2.000 0.200 0.190 0.880
10-310 5/16 0.04 0.459 0.459 2.000 0.245 0.650 -
10-311 11/32 0.06 0.495 0.495 2.000 0.245 0.650 -

Hand Sockets and Drive Tools

10-312 3/8 0.07 0.544 0.544 2.000 0.325 0.900 -
10-314 7/16 0.08 0.614 0.614 2.000 0.385 0.900 -
10-316 1/2 0.10 0.678 0.678 2.000 0.420 0.900 -
10-318 9/16 0.13 0.770 0.770 2.000 0.570 1.430 -
ASME B107.1 Fed'l Spec. GGG-W-641e

1/4” Drive 6 Point Deep Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches Lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
10-204 1/8 0.04 0.446 0.234 2.000 0.094 0.200 0.980
10-205 5/32 0.04 0.446 0.274 2.000 0.210 0.190 0.980
10-206 3/16 0.04 0.446 0.309 2.000 0.210 0.190 0.980
10-207 7/32 0.05 0.446 0.350 2.000 0.210 0.190 0.980
10-208 1/4 0.05 0.446 0.391 2.000 0.210 0.190 0.980
10-209 9/32 0.05 0.446 0.432 2.000 0.210 0.190 0.980
10-210 5/16 0.05 0.446 0.446 2.000 0.255 0.650 -
10-211 11/32 0.06 0.495 0.495 2.000 0.255 0.650 -

1/4" Drive
10-212 3/8 0.07 0.549 0.549 2.000 0.325 0.900 -
10-214 7/16 0.09 0.613 0.613 2.000 0.405 0.900 -
10-216 1/2 0.11 0.678 0.678 2.000 0.420 0.900 -
10-218 9/16 0.14 0.771 0.771 2.000 0.570 1.430 -
ASME B107.1 Fed'l Spec. GGG-W-641e

SAFETY NOTICE
NEVER USE HAND SOCKETS ON POWER OR IMPACT APPLICATIONS.

4-2
 4
1/4" Drive

1/4” Drive 4 or 8 Point Standard Length Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches Lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
10-406* 3/16 0.02 0.446 0.382 0.876 0.200 0.200 0.436
10-408* 1/4 0.02 0.463 0.463 0.876 0.240 0.280 -
10-410 5/16 0.03 0.546 0.546 0.876 0.320 0.480 -
10-412 3/8 0.05 0.678 0.678 0.876 0.381 0.500 -
ASME B107.1 Fed'l Spec. GGG-W-641e
*4 Point Sockets
1/4" Drive

1/4” Drive Extra Long Hex Driver Sockets

Hand Sockets and Drive Tools

A B C D
Product Bit Size Weight Drive Nose Overall Bit Replacement Exposed
Number Inches Lbs. End (in) Diameter (in) Length (in) Length (in) Bit Bit Length (in)
10-743 0.050 0.05 0.500 0.500 3.312 2.750 94-543 2.438
10-744 1/16 0.06 0.500 0.500 3.312 2.750 94-544 2.438
10-745 5/64 0.06 0.500 0.500 3.312 2.750 94-545 2.438
10-746 3/32 0.07 0.500 0.500 3.312 2.750 94-546 2.438
10-747 7/64 0.07 0.500 0.500 3.312 2.750 94-547 2.438
10-748 1/8 0.08 0.500 0.500 4.437 3.875 94-548 3.563
10-749 9/64 0.08 0.500 0.500 4.437 3.875 94-549 3.563
10-750 5/32 0.09 0.500 0.500 4.437 3.875 94-370 3.563
10-751 3/16 0.09 0.500 0.500 4.437 3.875 94-371 3.563
10-752 7/32 0.09 0.500 0.500 4.437 3.875 94-372 3.563
10-753 1/4 0.10 0.500 0.500 4.437 3.937 94-373 3.563
10-754 5/16 0.10 0.500 0.500 4.437 3.937 94-374 3.563

4-3 Always wear eye protection when near tools in use.

 4
1/4" Drive

1/4” Drive Standard Length Hex Driver Sockets

A B C D
Product Bit Size Weight Drive Nose Overall Bit Replacement Exposed
Number Inches Lbs. End (in) Diameter (in) Length (in) Length (in) Bit Bit Length (in)
10-703 0.050 0.03 0.500 0.500 1.875 1.312 94-503 1.000
10-704 1/16 0.04 0.500 0.500 1.875 1.312 94-504 1.000
10-705 5/64 0.04 0.500 0.500 1.875 1.312 94-505 1.000
10-706 3/32 0.04 0.500 0.500 1.875 1.312 94-506 1.000
10-707 7/64 0.04 0.500 0.500 1.875 1.312 94-507 1.000
10-708 1/8 0.04 0.500 0.500 1.875 1.312 94-508 1.000

Hand Sockets and Drive Tools

10-709 9/64 0.05 0.500 0.500 1.875 1.312 94-509 1.000
10-710 5/32 0.05 0.500 0.500 1.875 1.312 94-510 1.000
10-711 3/16 0.06 0.500 0.500 1.875 1.312 94-361 1.000
10-712 7/32 0.06 0.500 0.500 1.875 1.312 94-362 1.000
10-713 1/4 0.07 0.500 0.500 1.875 1.360 94-363 1.000
10-714 5/16 0.07 0.500 0.500 1.875 1.360 94-364 1.000

1/4” Drive Standard Length Torx® Driver Sockets

A B C D
Product Bit Size Weight Drive Nose Overall Bit Replacement Exposed
Number Inches Lbs. End (in) Diameter (in) Length (in) Length (in) Bit Bit Length (in)
10-868 T8 0.03 0.500 0.500 1.500 1.000 94-168 0.641
10-870 T10 0.03 0.500 0.500 1.500 1.000 94-170 0.641
10-872 T15 0.04 0.500 0.500 1.500 1.000 94-172 0.641
10-874 T20 0.04 0.500 0.500 1.500 1.000 94-174 0.641
10-876 T25 0.04 0.500 0.500 1.500 1.000 94-176 0.641
10-878 T27 0.04 0.500 0.500 1.500 1.000 94-178 0.641
10-880 T30 0.05 0.500 0.500 1.500 1.000 94-180 0.641
TORX® is the registered trademark of Acument Intellectual Properties, LLC.

1/4" Drive
1/4” Drive Screwdriver Sockets
A B C D
Product Weight Tip Size Drive Nose Overall Bit Replacement Exposed
Number Lbs. Inches End (in) Dia. (in) Length (in) Length (in) Bit Bit Length (in)
10-801 .05 3/16 x 1/32 0.500 0.500 2.440 1.940 94-101 1.578
10-802 .06 1/4 x 1/32 0.500 0.500 2.440 1.940 94-102 1.578
Fed’l Spec. GGG-W-001222

4-4
 4
1/4" Drive

1/4” Drive Phillips Screwdriver Sockets

A B C D
Product Weight Tip Size Drive Nose Overall Bit Replacement Exposed
Number Lbs. Inches End (in) Dia. (in) Length (in) Length (in) Bit Bit Length (in)
10-821 .05 Phil. #1 0.500 0.500 1.900 1.400 94-121 1.0469
10-822 .05 Phil. #2 0.500 0.500 1.900 1.400 94-122 1.0469
10-823 .06 Phil. #3 0.500 0.500 1.900 1.400 94-125 1.0469
Fed’l Spec. GGG-W-001222
1/4" Drive

1/4” Drive 6 Point Standard Length Sockets METRIC

A B C D E F
Hand Sockets and Drive Tools

Product Opening Weight Drive Wrench Overall Bolt Wrench Length to

Number mm g End (mm) End (mm) Length (mm) Clearance (mm) Depth (mm) Shoulder (mm)
37-004 4 9 11.3 7.0 22.3 3.7 4.1 11.1
37-081 4.5 9 11.5 7.9 22.2 4.7 4.6 11.1
37-005 5 8 11.3 7.8 22.3 4.1 4.6 11.1
37-083 5.5 9 11.3 8.7 22.3 4.1 5.0 11.1
37-006 6 9 11.3 9.2 22.3 4.9 5.1 11.1
37-007 7 10 11.3 10.7 22.3 5.5 5.6 11.1
37-008 8 11 11.8 11.8 22.3 5.3 7.4 -
37-009 9 12 12.8 12.8 22.3 5.3 7.9 -
37-010 10 13 13.9 13.9 22.3 10.2 12.7 -
37-011 11 17 15.6 15.6 22.3 11.2 12.7 -
37-012 12 22 17.1 17.1 22.3 12.2 12.7 -
37-013 13 26 18.4 18.4 22.3 13.2 12.7 -
37-014 14 33 19.6 19.6 22.3 14.2 12.7 -
37-015 15 36 20.6 20.6 22.3 15.2 12.7 -
ASME B107.5m

1/4” Drive 6 Point Deep Sockets METRIC

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number mm g End (mm) End (mm) Length (mm) Clearance (mm) Depth (mm) Shoulder (mm)
37-204 4 19 11.4 7.0 50.8 5.3 4.8 22.4
37-281 4.5 22 11.4 8.0 50.8 5.3 7.5 22.6
37-205 5 20 11.4 8.0 50.8 5.3 7.2 22.6
37-283 5.5 65 11.4 8.9 50.8 5.3 7.5 22.6
37-206 6 22 11.3 9.4 50.8 5.3 4.8 22.6
37-207 7 23 11.3 10.7 50.8 5.3 5.1 22.6
37-208 8 22 11.3 11.3 50.8 5.0 16.5 -
37-209 9 26 12.6 12.6 50.8 6.1 16.5 -
37-210 10 31 13.8 13.8 50.8 6.1 22.9 -
37-211 11 40 15.6 15.6 50.8 6.1 22.9 -
ASME B107.5m

4-5 Always wear eye protection when near tools in use.

 4
1/4" Drive

1/4” Drive 12 Point Sockets METRIC

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number mm g End (mm) End (mm) Length (mm) Clearance (mm) Depth (mm) Shoulder (mm)
37-105 5 8 11.3 7.8 22.3 4.1 4.6 11.1
37-106 6 9 11.3 9.2 22.3 4.9 5.1 11.1
37-107 7 10 11.3 10.7 22.3 5.5 5.6 11.1
37-108 8 11 11.8 11.8 22.3 5.3 7.4 -
37-109 9 12 12.8 12.8 22.3 5.3 7.9 -
37-110 10 13 13.9 13.9 22.3 10.2 12.7 -

Hand Sockets and Drive Tools

37-111 11 17 15.6 15.6 22.3 11.2 12.7 -
37-112 12 22 17.1 17.1 22.3 12.2 12.7 -
37-113 13 26 18.4 18.4 22.3 13.2 12.7 -
37-114 14 31 19.6 19.6 22.3 14.2 12.7 -

1/4” Drive Standard Length Hex Driver Sockets METRIC

A B C D
Product Bit Size Wt. Drive Nose Overall Bit Replacement Exposed
Number mm g End (mm) Dia. (mm) Length (mm) Length (mm) Bit (mm) Bit Length (mm)
37-703 2 18 12.7 12.7 47.6 33.3 94-603 25.4
37-704 2.5 18 12.7 12.7 47.6 33.3 94-604 25.4
37-705 3 19 12.7 12.7 47.6 33.3 94-605 25.4
37-707 4 21 12.7 12.7 47.6 33.3 94-607 25.4
37-709 5 23 12.7 12.7 47.6 33.3 94-389 25.4
37-711 6 25 12.7 12.7 47.6 34.5 94-391 25.4
37-713 8 28 12.7 12.7 47.6 34.5 94-393 25.4

1/4" Drive

4-6
 4
1/4" Drive

1/4” Drive Teardrop Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of teeth
10-972 0.27 5.281 0.875 0.969 36
ASME B107.10m Fed'l Spec. GGG-W-641e

1/4” Drive Black Oxide Teardrop Ratchet

Product Weight Overall Head Head Number
1/4" Drive

Number Lbs. Length (in) Width (in) Depth (in) of teeth

18-972 0.27 5.281 0.875 0.969 36
ASME B107.10m Fed'l Spec. GGG-W-641e

1/4” Drive Armstrong Maxx Standard Handle Ratchet

Hand Sockets and Drive Tools

Product Weight Overall Head Head Number

Number Lbs. Length (in) Width (in) Depth (in) of teeth
10-992 0.21 5.440 0.875 0.750 60
• Machined Gear Teeth and high strength steel pawl for superior strength and
consistent performance
• Enclosed head for extreme resistance to dirt
• Sleek tapered head design with 6-degree ratcheting arc for increased accessibility

1/4” Drive Armstrong Maxx Locking Flex Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of teeth
10-994 0.30 6.250 0.875 0.750 60
• Machined Gear Teeth and high strength steel pawl for superior strength and
consistent performance
• Enclosed head for extreme resistance to dirt
• 9-Position Locking Flex Head maximizes safety and maintains position regardless
of load

1/4” Drive Quick Release Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of teeth
10-967A 0.25 5.500 1.000 0.460 36

1/4” Drive Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of teeth
10-968A 0.25 5.500 1.000 0.460 36

1/4” Drive Round Head Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of teeth
10-915 0.21 5.100 1.000 0.720 35

4-7 Always wear eye protection when near tools in use.

 4
1/4" Drive

1/4” Drive Round Head Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of teeth
10-915A 0.28 5.000 1.100 0.700 45

1/4” Drive Indexible Head Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of teeth

Hand Sockets and Drive Tools

10-996 0.25 6.000 0.750 0.688 72

1/4” Drive Breaker Bar

Product Length Weight
Number Inches Lbs.
10-918 5.750 0.16
ASME B107.10m Fed'l Spec. GGG-W-641e

1/4” Drive Extensions

Product Length Weight Length Weight
Number Inches Lbs. Part # Inches Lbs.
10-921 2.000 0.06 10-919A* 1.500 0.03
10-922 4.000 0.11 10-922A* 3.500 0.06
10-923 6.000 0.14 10-923A* 6.000 0.12
10-924 10.000 0.23
10-925 14.000 0.32
ASME B107.10m Fed'l Spec. GGG-W-641e *No Knurling

1/4” Drive Flex Extension

Product Length Weight
Number Inches Lbs.
10-929 6.000 0.09
ASME B107.10m Fed'l Spec. GGG-W-641e

10-920

1/4" Drive
3 Pc. 1/4” Drive Locking Extension Set
Contents: 3 Locking Extensions. Approximate Weight, 0.75 lbs.
Product Number Length Inches
10-926 3.000
10-927 6.000
10-928 15.000

1/4” Drive Locking Extensions

Product Length Weight
Number Inches Lbs.
10-926 3.000 0.10
10-927 6.000 0.20
10-928 15.000 0.45

4-8
 4
1/4" Drive

10-979
3 Pc. 1/4” Drive Wobble Extension Set
Contents: 3 Wobble Extensions. Approximate Weight, 0.28 lbs.
Product Number Length Inches
10-973 2.000
10-974 3.000
10-975 6.000

1/4” Drive Wobble Extensions

1/4" Drive

Product Length Weight

Number Inches Lbs.
10-973 2.000 0.06
10-974 3.000 0.08
10-975 6.000 0.14
Hand Sockets and Drive Tools

1/4” Drive Locking Adapter*

Product Length Weight
Number Inches Lbs.
10-931 1.625 0.05
*Permits socket to be securely locked to drive tool square.

ASME B107.10m Fed'l Spec. GGG-W-641e

1/4” Drive Speeder

Product Length Weight
Number Inches Lbs.
10-935 15.750 0.55
ASME B107.10m Fed'l Spec. GGG-W-641e

1/4” Drive T-Handle

Product Length Weight
Number Inches Lbs.
10-938 5.000 0.14

1/4” Drive Plastic Handle Driver

Product Length Weight
Number Inches Lbs.
10-943 6.000 0.13
ASME B107.10m Fed'l Spec. GGG-W-641e

1/4” Drive Socket Spinner

Product Weight
Number Lbs.
10-945 0.18

4-9 Always wear eye protection when near tools in use.

 4
1/4" Drive

1/4” Drive Universal Joint

Product Weight
Number Lbs.
10-947 0.04
ASME B107.10m Fed'l Spec. GGG-W-641e

Hand Sockets and Drive Tools

1/4” Drive Adapter
Product Weight Overall
Number Description Lbs. Length
10-952 1/4"F, 3/8"M 0.03 1.138
ASME B107.10m Fed'l Spec. GGG-W-641e

1/4” Drive Ratchet Repair Kit

Product Number 10-990
Contains the following parts, with illustrated instruction sheet, for
repairing the 10-972 and 18-972 Ratchets: Gear, Pawl, Shifting
Lever, Spring, Ball, Cover Plate, 2 Cover Plate Screws. In cardboard
box. Approximate weight, 0.07 pounds.

1/4” Drive Ratchet Repair Kit

Product Number 10-963
Contains the following parts, with illustrated instruction sheet, for
repairing the 10-915 Ratchet: Reversing Lever Plate, Retaining
Spring, Gear Unit.

1/4” Drive Armstrong Maxx Ratchet Repair Kit

Product Number 10-982
Contains the following parts, with illustrated instruction sheet, for
repairing the 10-992 and 10-994 Ratchets: Gear, Pawl, Shifting
Lever, Spring, Retaining Plate and Rings, Pusher, and 2 O-Rings.

1/4" Drive
Approximate weight, 0.07 pounds.

1/4” Drive Indexible Ratchet Repair Kit

Product Number 10-983
Contains the following parts, with illustrated instruction sheet, for
repairing the 10-996 Ratchet: Square Drive, Heart-shaped Spring,
Reversing Cap, Central Screw, and Ratchet Lube.

SAFETY NOTICE
Since ratchets include moving parts, periodic inspection and, if
necessar y, cleaning, lubrication with a light grade oil, and
replacement of worn parts will become necessar y. Parts should
not be replaced individually, but rather in total, and complete
Ratchet Repair Kits are available.

4-10
 4
3/8" Drive

3/8” Drive 12 Point Standard Length Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches Lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
11-108 1/4 0.04 0.66 0.417 0.938 0.170 0.165 0.438
11-110 5/16 0.04 0.66 0.458 0.938 0.319 0.166 0.438
11-111 11/32 0.05 0.66 0.586 0.960 0.351 0.275 0.438
11-112 3/8 0.04 0.66 0.560 0.938 0.381 0.224 -
11-114 7/16 0.05 0.66 0.655 0.938 0.443 0.250 -
11-116 1/2 0.06 0.72 0.724 0.968 0.507 0.275 -
11-118 9/16 0.06 0.78 0.777 0.968 0.570 0.460 -
3/8" Drive

11-119 19/32 0.09 0.86 0.863 1.013 0.602 0.500 -

11-120 5/8 0.08 0.86 0.862 1.013 0.633 0.500 -
11-122 11/16 0.11 0.95 0.952 1.013 0.696 5.000 -
11-124 3/4 0.13 1.00 1.003 1.128 0.759 0.660 -
11-126 13/16 0.14 1.08 1.076 1.128 0.821 0.680 -
11-128 7/8 0.21 1.17 1.167 1.250 0.884 0.750 -
11-130 15/16 0.24 1.25 1.250 1.240 0.906 0.760 -
11-132 1 0.28 1.31 1.310 1.378 0.980 0.800 -
Hand Sockets and Drive Tools

ASME B107.1 Fed'l Spec. GGG-W-641e

3/8” Drive 6 Point Standard Length Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches Lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
11-008 1/4 0.04 0.658 0.414 0.938 0.170 0.166 0.438
11-010 5/16 0.04 0.658 0.458 0.938 0.319 0.166 0.438
11-011 11/32 0.05 0.658 0.518 0.938 0.300 0.235 0.438
11-012 3/8 0.04 0.658 0.560 0.938 0.381 0.224 0.438
11-014 7/16 0.05 0.655 0.655 0.938 0.443 0.250 -
11-016 1/2 0.07 0.724 0.724 0.968 0.507 0.275 -
11-018 9/16 0.07 0.777 0.777 0.968 0.570 0.460 -
11-020 5/8 0.09 0.862 0.862 1.013 0.638 0.500 -
11-022 11/16 0.11 0.952 0.952 1.013 0.696 0.500 -
11-024 3/4 0.13 1.001 1.001 1.128 0.759 0.660 -
11-026 13/16 0.15 1.076 1.076 1.128 0.828 0.680 -
11-028 7/8 0.22 1.167 1.167 1.250 0.884 0.750 -
11-030 15/16 0.25 1.250 1.250 1.240 0.906 0.760 -
11-032 1 0.29 1.310 1.310 1.378 0.980 0.800 -
ASME B107.1 Fed'l Spec. GGG-W-641e

4-11 Always wear eye protection when near tools in use.

 4
3/8" Drive

3/8” Drive 12 Point Deep Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches Lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
11-308 1/4 0.10 0.648 0.410 2.500 0.310 0.440 0.865
11-310 5/16 0.10 0.648 0.490 2.500 0.310 0.440 0.865
11-311 11/32 0.11 0.648 0.500 2.500 0.310 0.440 0.865
11-312 3/8 0.12 0.649 0.561 2.500 0.380 0.375 0.865
11-314 7/16 0.12 0.653 0.653 2.500 0.344 0.870 -
11-316 1/2 0.15 0.724 0.724 2.500 0.460 1.188 -

Hand Sockets and Drive Tools

11-318 9/16 0.14 0.773 0.773 2.500 0.570 1.377 -
11-320 5/8 0.18 0.860 0.860 2.500 0.615 1.377 -
11-322 11/16 0.23 0.950 0.950 2.500 0.660 1.377 -
11-324 3/4 0.24 1.000 1.000 2.500 0.740 1.377 -
11-326 13/16 0.34 1.108 1.108 2.500 0.765 1.500 -
11-328 7/8 0.34 1.170 1.170 2.513 0.815 1.500 -
11-330 15/16 0.46 1.250 1.250 2.520 0.870 1.300 -
11-332 1 0.53 1.310 1.310 2.520 0.870 1.300 -
ASME B107.1 Fed'l Spec. GGG-W-641e

3/8” Drive 6 Point Deep Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches Lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
11-208 1/4 0.10 0.648 0.410 2.500 0.310 0.440 0.865
11-210 5/16 0.10 0.648 0.490 2.500 0.310 0.440 0.865
11-211 11/32 0.11 0.648 0.500 2.500 0.310 0.440 0.865
11-212 3/8 0.19 0.648 0.561 2.500 0.310 0.375 0.865
11-214 7/16 0.12 0.651 0.651 2.500 0.370 0.680 -
11-216 1/2 0.15 0.724 0.724 2.500 0.470 1.188 -
11-218 9/16 0.15 0.774 0.774 2.500 0.505 1.378 -
11-220 5/8 0.19 0.860 0.860 2.500 0.615 1.377 -
11-222 11/16 0.24 0.950 0.950 2.500 0.660 1.377 -

3/8" Drive
11-224 3/4 0.25 1.001 1.001 2.500 0.740 1.377 -
11-226 13/16 0.36 1.107 1.107 2.500 0.770 1.500 -
11-228 7/8 0.37 1.169 1.169 2.513 0.884 1.500 -
11-230 15/16 0.46 1.250 1.250 2.520 0.870 1.300 -
11-232 1 0.53 1.310 1.310 2.520 0.870 1.300 -
ASME B107.10m Fed'l Spec. GGG-W-641e

4-12
 4
3/8" Drive

3/8” Drive 8 Point Standard Length Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches Lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
11-408 1/4 0.04 0.658 0.458 0.938 0.255 0.179 0.438
11-409 9/32 0.05 0.658 0.572 0.938 0.270 0.240 0.423
11-410 5/16 0.05 0.658 0.582 0.938 0.300 0.220 0.423
11-412 3/8 0.05 0.676 0.676 0.938 0.381 0.228 -
11-414 7/16 0.08 0.776 0.776 0.968 0.443 0.310 -
11-416 1/2 0.10 0.862 0.862 0.968 0.507 0.275 -
11-418 9/16 0.13 0.931 0.931 1.375 0.570 0.800 -
3/8" Drive

11-420 5/8 0.21 1.037 1.037 1.375 0.633 0.600 -

ASME B107.1 Fed'l Spec. GGG-W-641e

3/8” Drive Spark Plug Sockets with Rubber Insert

Hand Sockets and Drive Tools

A B C D
Product Square Opening Weight Hex Across Wrench Overall Wrench
Number Drive Inches Lbs. Flats, Drive End (in) End (in) Length (in) Depth (in)
11-501 3/8 5/8 0.19 0.742 0.873 2.345 0.605
11-504 3/8 13/16 0.27 1.056 1.056 2.500 0.525
Fed’l Spec. GGG-W-641e

3/8” Drive 12-Point Universal Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches Lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
11-512 3/8 0.09 0.750 0.597 1.680 0.334 0.330 0.220
11-514 7/16 0.11 0.750 0.640 1.680 0.334 0.330 0.220
11-516 1/2 0.12 0.750 0.714 1.680 0.345 0.330 0.265
11-518 9/16 0.13 0.750 0.785 1.687 0.410 0.400 0.465
11-520 5/8 1.40 0.750 0.865 1.687 0.470 0.400 0.465
11-522 11/16 0.15 0.750 0.932 1.693 0.470 0.440 0.520
11-524 3/4 0.16 0.750 1.023 1.693 0.500 0.440 0.520
ASME B107.1 Fed'l Spec. GGG-W-641e

4-13 Always wear eye protection when near tools in use.

 4
3/8" Drive

3/8” Drive Crowfoot Wrenches

A B1 B2 C1 C2
Product Opening Weight Overall Head Handle Head Handle
Number Inches Lbs. Length (in) Width (in) Width (in) Thickness (in) Thickness (in)
11-850 3/8 0.12 1.270 0.750 0.630 0.220 0.440
11-851 7/16 0.14 1.280 0.880 0.630 0.220 0.440
11-852 1/2 0.14 1.380 0.930 0.630 0.270 0.440
11-853 9/16 0.12 1.490 1.130 0.630 0.270 0.440
11-854 5/8 0.13 1.600 1.200 0.630 0.350 0.440
11-855 11/16 0.18 1.710 1.330 0.630 0.350 0.440

Hand Sockets and Drive Tools

11-856 3/4 0.18 1.820 1.500 0.630 0.350 0.440
11-857 13/16 0.21 1.930 1.560 0.630 0.350 0.440
11-858 7/8 0.22 2.040 1.690 0.630 0.370 0.440
11-859 15/16 0.22 1.985 1.860 0.630 0.360 0.440
11-860 1 0.22 2.260 2.030 0.630 0.370 0.440
ASME B107.21 Fed'l Spec. GGG-W-1507b

3/8” Drive Flare Nut Crowfoot Wrenches

A B C D
Product Opening Weight Head Head Slot Length of
Number Inches Lbs. Diameter (in) Thickness (in) Width (in) Centers (in)
11-842 5/8 0.06 0.938 0.688 0.469 0.734
11-843 11/16 0.06 1.031 0.688 0.531 0.781
11-844 3/4 0.06 1.125 0.719 0.563 0.828
11-845 13/16 0.06 1.203 0.719 0.625 0.875
11-846 7/8 0.06 1.297 0.750 0.688 0.938
11-847 15/16 0.06 1.375 0.750 0.719 0.938
11-848 1 0.13 1.453 0.781 0.750 1.016
11-849 1-1/16 0.13 1.531 0.781 0.781 1.047
ASME B107.21 Fed'l Spec. GGG-e-1507b

3/8" Drive

4-14
 4
3/8" Drive

3/8” Drive Extra Long Hex Driver Sockets

A B C D E
Product Bit Size Weight Drive Nose Overall Bit Length to Replacement
Number Inches Lbs. End (in) Dia. (in) Length (in) Length (in) Shoulder (in) Bit
11-748 1/8 0.09 0.675 0.531 6.150 5.375 0.475 94-148
11-750 5/32 0.10 0.675 0.531 6.150 5.375 0.475 94-150
11-751 3/16 0.12 0.675 0.531 6.150 5.375 0.475 94-151
11-752 7/32 0.14 0.675 0.531 6.150 5.375 0.475 94-152
11-753 1/4 0.17 0.675 0.600 6.150 5.500 0.475 94-153
11-754 5/16 0.22 0.700 - 6.150 5.500 - 94-154
11-755 3/8 0.26 0.700 - 6.150 5.500 - 94-155
3/8" Drive
Hand Sockets and Drive Tools

3/8” Drive Standard Length Hex Driver Sockets

A B C D E
Product Bit Size Weight Drive Nose Overall Bit Length to Replacement
Number Inches Lbs. End (in) Dia. (in) Length (in) Length (in) Shoulder (in) Bit
11-708 1/8 0.08 0.675 0.531 2.780 2.000 0.475 94-108
11-709 9/64 0.08 0.675 0.531 2.780 2.000 0.475 94-109
11-710 5/32 0.08 0.675 0.531 2.780 2.000 0.475 94-110
11-711 3/16 0.09 0.675 0.531 2.780 2.000 0.475 94-111
11-712 7/32 0.09 0.675 0.531 2.780 2.000 0.475 94-112
11-713 1/4 0.12 0.675 0.600 2.780 2.125 0.475 94-113
11-714 5/16 0.14 0.700 - 2.780 2.125 - 94-114
11-715 3/8 0.16 0.700 - 2.780 2.125 - 94-115

4-15 Always wear eye protection when near tools in use.

 4
3/8" Drive

3/8” Drive Standard Length Torx® Driver Sockets

A B C D E
Product Bit Weight Drive Nose Overall Bit Length to Replacement
Number Size Lbs. End (in) Dia. (in) Length (in) Length (in) Shoulder (in) Bit
11-870 T10 0.08 0.675 0.600 1.650 1.000 0.475 94-170
11-872 T15 0.09 0.675 0.600 1.650 1.000 0.475 94-172
11-874 T20 0.09 0.675 0.600 1.650 1.000 0.475 94-174
11-876 T25 0.09 0.675 0.600 1.650 1.000 0.475 94-176
11-878 T27 0.09 0.675 0.600 1.650 1.000 0.475 94-178
11-880 T30 0.09 0.675 0.600 1.650 1.000 0.475 94-180

Hand Sockets and Drive Tools

11-882 T40 0.12 0.700 - 1.900 1.250 - 94-182
11-884 T45 0.15 0.700 - 1.900 1.250 - 94-184
11-886 T50 0.18 0.700 - 1.900 1.250 - 94-186
11-888 T55 0.21 0.810 - 2.330 1.500 - 94-188
TORX® is the registered trademark of Acument Intellectual Properties, LLC.

3/8” Drive Screwdriver Sockets

A B C
Product Tip Size Weight Drive Overall Bit Replacement
Number Inches Lbs. End (in) Length (in) Length (in) Bit
11-802 1/4 x 1/32 0.13 0.700 2.590 1.940 94-102
11-803 5/16 x 3/64 0.13 0.700 2.590 1.940 94-103
11-805 3/8 x 1/16 0.13 0.700 2.590 1.940 94-105
Fed’l Spec. GGG-W-001222

3/8" Drive
3/8” Drive Phillips Screwdriver Sockets
A B C
Product Tip Size Weight Drive Overall Bit Replacement
Number Inches Lbs. End (in) Length (in) Length (in) Bit
11-821 Phil. #1 0.11 0.700 2.050 1.400 94-121
11-822 Phil. #2 0.11 0.700 2.050 1.400 94-122
11-825 Phil. #3 0.11 0.700 2.050 1.400 94-125
11-828 Phil. #4 0.11 0.700 2.050 1.400 94-128
Fed’l Spec. GGG-W-001222

4-16
 4
3/8" Drive

3/8” Drive 12 Point Black Oxide Standard Length Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches Lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
19-108 1/4 0.04 0.660 0.385 0.872 0.141 0.180 0.380
19-110 5/16 0.04 0.660 0.461 0.872 0.172 0.180 0.380
19-112 3/8 0.04 0.660 0.563 0.872 0.281 0.250 0.380
19-114 7/16 0.04 0.655 0.655 0.872 0.281 0.250 -
19-116 1/2 0.06 0.724 0.724 0.900 0.344 0.280 -
19-118 9/16 0.06 0.777 0.777 0.900 0.500 0.430 -
19-120 5/8 0.08 0.862 0.862 0.972 0.600 0.510 -
3/8" Drive

19-122 11/16 0.10 0.952 0.952 0.972 0.680 0.510 -

19-124 3/4 0.12 1.003 1.003 1.097 0.680 0.640 -
19-126 13/16 0.15 1.076 1.076 1.097 0.680 0.660 -
19-128 7/8 0.20 1.173 1.173 1.150 0.680 0.630 -
19-130 15/16 0.27 1.250 1.260 1.260 0.906 0.760 -
19-132 1 0.28 1.310 1.310 1.375 0.980 0.800 -
ASME B107.1 Fed'l Spec. GGG-W-641e
Hand Sockets and Drive Tools

3/8” Drive 12 Point Black Oxide Deep Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches Lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
19-308 1/4 0.07 0.654 0.385 2.430 0.220 0.400 0.800
19-310 5/16 0.08 0.654 0.461 2.430 0.258 0.400 0.800
19-312 3/8 0.09 0.654 0.563 2.430 0.281 0.400 0.800
19-314 7/16 0.10 0.654 0.655 2.430 0.281 0.840 -
19-316 1/2 0.13 0.724 0.724 2.430 0.469 1.250 -
19-318 9/16 0.16 0.777 0.777 2.430 0.531 1.450 -
19-320 5/8 0.19 0.862 0.862 2.430 0.594 1.450 -
19-322 11/16 0.23 0.952 0.952 2.430 0.656 1.450 -
19-324 3/4 0.27 1.003 1.003 2.430 0.547 1.450 -
19-326 13/16 0.31 1.076 1.076 2.430 0.781 1.500 -
19-328 7/8 0.42 1.173 1.173 2.430 0.672 1.500 -
19-330 15/16 0.46 1.260 1.260 2.500 0.870 1.400 -
19-332 1 0.51 1.310 1.310 2.500 0.870 1.400 -
ASME B107.1 Fed'l Spec. GGG-W-641e

3/8” Drive 12 Point Black Oxide Universal Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches Lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
19-512 3/8 0.09 0.750 0.597 1.680 0.334 0.330 0.220
19-514 7/16 0.11 0.750 0.640 1.680 0.334 0.330 0.220
19-516 1/2 0.12 0.750 0.714 1.680 0.345 0.330 0.265
19-518 9/16 0.13 0.750 0.785 1.687 0.410 0.400 0.465
19-520 5/8 1.40 0.750 0.865 1.687 0.470 0.400 0.465
19-522 11/16 0.15 0.750 0.932 1.693 0.470 0.440 0.520
19-524 3/4 0.16 0.750 1.023 1.693 0.500 0.440 0.520
ASME B107.1 Fed'l Spec. GGG-W-641e

4-17 Always wear eye protection when near tools in use.

 4
3/8" Drive

3/8” Drive 12 Point Standard Length Sockets METRIC

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number mm g End (mm) End (mm) Length (mm) Clearance (mm) Depth (mm) Shoulder (mm)
38-106 6 18 16.7 9.9 23.8 4.3 4.8 11.1
38-107 7 19 16.7 10.5 23.8 4.3 4.2 11.0
38-108 8 18 16.7 11.6 23.8 5.6 4.2 11.1
38-109 9 18 16.7 12.9 23.8 5.6 5.1 11.0
38-110 10 20 16.7 14.8 23.8 5.6 5.8 11.1
38-111 11 22 16.7 16.7 23.8 9.3 6.4 -

Hand Sockets and Drive Tools

38-112 12 23 17.2 17.2 24.6 9.3 7.2 -
38-113 13 29 18.4 18.4 24.6 9.3 7.0 -
38-114 14 29 19.7 19.7 24.6 14.2 11.7 -
38-115 15 32 20.7 20.7 24.6 15.2 11.7 -
38-116 16 37 21.9 21.9 25.7 16.2 12.7 -
38-117 17 45 23.5 23.5 25.7 17.2 14.3 -
38-118 18 50 24.2 24.2 28.7 18.2 13.6 -
38-119 19 57 25.5 25.5 28.7 19.2 16.6 -
38-120 20 69 27.4 27.4 28.7 20.2 16.8 -
38-121 21 82 28.5 28.5 30.5 21.2 18.1 -
38-122 22 94 29.6 29.9 31.8 22.3 16.4 -
38-123 23 122 30.2 30.2 34.9 17.1 14.0 -
38-126 26 139 33.4 33.4 38.1 22.2 17.8 -
ASME B107.5m

3/8” Drive 6 Point Standard Length Sockets METRIC

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number mm g End (mm) End (mm) Length (mm) Clearance (mm) Depth (mm) Shoulder (mm)
38-006 6 19 16.7 9.9 23.8 4.3 5.5 11.1
38-007 7 19 16.7 10.5 23.8 4.3 4.2 11.1
38-008 8 19 16.7 11.6 23.8 5.6 4.2 11.1
38-009 9 20 16.7 12.9 23.8 5.6 5.1 11.1
38-010 10 20 16.7 14.8 23.8 7.6 5.8 10.7
38-011 11 23 16.6 16.6 23.8 9.3 6.4 -
38-012 12 24 17.2 17.2 24.6 9.3 7.2 -
38-013 13 30 18.4 18.4 24.6 9.3 7.0 -
38-014 14 30 19.7 19.7 24.6 14.2 11.7 -
38-015 15 34 20.7 20.7 24.6 14.9 11.8 -
38-016 16 39 21.9 21.9 25.7 16.2 12.7 -

3/8" Drive
38-017 17 47 23.5 23.5 25.7 17.2 13.6 -
38-018 18 52 24.2 24.2 28.7 18.2 13.6 -
38-019 19 60 25.6 25.6 28.7 19.2 16.6 -
38-020 20 72 27.3 27.3 28.7 20.2 17.3 -
38-021 21 85 28.5 28.5 30.5 21.2 18.1 -
38-022 22 99 29.6 29.6 31.8 22.3 18.9 -
38-023 23 122 30.2 30.2 34.9 17.1 15.9 -
38-026 26 143 33.4 33.4 38.1 22.2 17.8 -
ASME B107.5m

SAFETY NOTICE
METRIC AND FRACTIONAL SOCKET OPENINGS ARE NOT INTERCHANGEABLE.
PLEASE SELECT THE APPROPRIATE OPENING SIZE FOR THE JOB AT HAND.

4-18
 4
3/8" Drive

3/8” Drive 12 Point Deep Sockets METRIC

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number mm g End (mm) End (mm) Length (mm) Clearance (mm) Depth (mm) Shoulder (mm)
38-306 6 30 16.5 9.5 63.5 4.0 10.9 22.0
38-307 7 30 16.5 10.6 63.5 4.8 10.9 22.0
38-308 8 37 16.5 11.5 63.5 6.4 10.9 22.0
38-309 9 48 16.5 12.9 63.5 8.4 9.5 23.0
38-310 10 53 16.5 14.8 63.5 7.9 9.5 23.0
38-311 11 54 16.5 16.5 63.5 8.7 17.3 -
38-312 12 63 17.2 17.2 63.5 8.7 17.3 -
3/8" Drive

38-313 13 66 18.4 18.4 63.5 11.4 30.2 -

38-314 14 67 19.7 19.7 63.5 12.4 35.0 -
38-315 15 72 20.7 20.7 63.5 13.6 35.0 -
38-316 16 81 21.8 21.8 63.5 15.6 35.0 -
38-317 17 98 23.5 23.5 63.5 16.8 35.0 -
38-318 18 99 24.1 24.1 63.5 16.8 35.0 -
38-319 19 109 25.4 25.4 63.5 18.8 35.0 -
38-320 20 171 28.7 28.7 63.8 17.6 38.1 -
38-321 21 149 28.7 28.7 63.5 19.6 38.1 -
Hand Sockets and Drive Tools

38-322 22 157 29.8 29.8 63.5 21.7 38.9 -

38-323 23 160 30.2 30.2 73.0 17.1 13.5 -
38-326 26 199 30.2 30.2 73.0 22.2 26.5 -
ASME B107.5m

3/8” Drive 6 Point Deep Sockets METRIC

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number mm g End (mm) End (mm) Length (mm) Clearance (mm) Depth (mm) Shoulder (mm)
38-206 6 30 16.5 9.5 63.5 4.0 10.9 22.0
38-207 7 30 16.5 10.6 63.5 4.8 10.9 22.0
38-208 8 38 16.5 11.5 63.5 6.4 10.9 22.0
38-209 9 49 16.5 12.9 63.5 7.9 9.5 22.0
38-210 10 54 16.5 14.8 63.5 7.9 9.5 22.0
38-211 11 57 16.5 16.5 63.5 8.7 17.3 -
38-212 12 65 17.2 17.2 63.5 8.7 17.3 -
38-213 13 68 18.4 18.4 63.5 11.7 30.2 -
38-214 14 72 19.6 19.6 63.5 12.4 35.0 -
38-215 15 78 20.7 20.7 63.5 13.6 35.0 -
38-216 16 87 21.8 21.8 63.5 15.6 35.0 -
38-217 17 104 23.5 23.5 63.5 16.8 35.0 -
38-218 18 105 24.1 24.1 63.5 16.8 35.0 -
38-219 19 114 25.4 25.4 63.5 18.8 35.0 -
38-220 20 179 28.7 28.7 63.8 19.6 39.0 -
38-221 21 168 28.7 28.7 63.8 19.6 39.0 -
38-222 22 168 29.9 29.9 63.8 20.2 39.0 -
38-223 23 169 30.2 30.2 73.0 17.1 13.5 -
38-226 26 207 30.2 30.2 73.0 22.2 26.5 -
ASME B107.5m

4-19 Always wear eye protection when near tools in use.

 4
3/8" Drive

3/8” Drive Crowfoot Wrenches METRIC

A B1 B2 C1 C2
Product Opening Weight Overall Head Handle Head Handle
Number mm g Length (mm) Width (mm) Width (mm) Thickness (mm) Thickness (mm)
38-850 10 27 30.5 20.6 16.0 5.6 11.2
38-851 11 27 32.5 22.4 16.0 5.6 11.2
38-852 12 27 34.0 23.9 16.0 6.4 11.2
38-853 13 41 35.1 23.6 16.0 6.6 11.2
38-854 14 41 37.8 28.4 16.0 6.6 11.2
38-855 15 41 39.4 29.5 16.0 7.9 11.2

Hand Sockets and Drive Tools

38-856 16 41 40.6 30.5 16.0 8.9 11.2
38-857 17 59 43.4 33.8 16.0 8.9 11.2
38-858 18 59 44.7 35.3 16.0 8.9 11.2
38-859 19 73 46.2 38.1 16.0 8.9 11.2
38-861 21 73 52.1 40.9 16.0 9.1 11.2
38-862 22 86 51.8 42.9 16.0 9.4 11.2

3/8” Drive Extra Long Hex Driver Sockets METRIC

A B C D E
Product Bit Size Weight Drive Nose Overall Bit Length to Replacement
Number mm g End (mm) Dia. (mm) Length (mm) Length (mm) Shoulder (mm) Bit
38-747 4 44 17.2 13.5 156.0 136.5 12.0 94-347
38-749 5 49 17.2 13.5 156.0 136.5 12.0 94-349
38-751 6 65 17.2 13.5 156.0 139.7 12.0 94-351
38-752 7 80 17.2 13.5 156.0 139.7 12.0 94-352
38-753 8 95 17.2 - 156.0 139.7 - 94-353
38-754 9 105 17.2 - 156.0 139.7 - 94-354
38-755 10 125 17.2 - 156.0 139.7 - 94-355

3/8" Drive
3/8” Drive Standard Length Hex Driver Sockets METRIC
A B C D E
Product Bit Size Weight Drive Nose Overall Bit Length to Replacement
Number mm g End (mm) Dia. (mm) Length (mm) Length (mm) Shoulder (mm) Bit
38-705 3 36 17.2 13.5 71.0 50.8 12.0 94-305
38-707 4 38 17.2 13.5 71.0 50.8 12.0 94-307
38-709 5 40 17.2 13.5 71.0 50.8 12.0 94-309
38-711 6 48 17.2 13.5 71.0 54.0 12.0 94-311
38-712 7 50 17.2 13.5 71.0 54.0 12.0 94-312
38-713 8 58 17.2 - 71.0 54.0 - 94-313
38-714 9 60 17.2 - 71.0 54.0 - 94-314
38-715 10 65 17.2 - 71.0 54.0 - 94-315

4-20
 4
3/8" Drive

3/8” Drive Teardrop Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of Teeth
11-972 0.71 7.375 1.156 0.656 36
ASME B107.10m Fed'l Spec. GGG-W-641e

3/8” Drive Long Handle Teardrop Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of Teeth
3/8" Drive

11-973 0.96 10.500 1.156 0.656 36

ASME B107.10m Fed'l Spec. GGG-W-641e

3/8” Drive Flex Head Teardrop Ratchet

Product Weight Overall Head Head Number
Hand Sockets and Drive Tools

Number Lbs. Length (in) Width (in) Depth (in) of Teeth

11-974 0.89 9.500 1.156 0.656 36
ASME B107.10m Fed'l Spec. GGG-W-641e

3/8” Drive Plastic Handle Teardrop Ratchets

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of Teeth
11-978 0.71 8.375 1.156 0.656 36
11-979 0.96 11.500 1.156 0.656 36
ASME B107.10m Fed'l Spec. GGG-W-641e

3/8” Drive Black Oxide Teardrop Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of Teeth
19-972 0.69 7.375 1.156 0.656 36
ASME B107.10m Fed'l Spec. GGG-W-641e

3/8” Drive Armstrong Maxx Standard Handle Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of teeth
11-992 0.70 8.000 1.188 1.000 60
• Machined Gear Teeth and high strength steel pawl for superior strength and
consistent performance
• Enclosed head for extreme resistance to dirt
• Sleek tapered head design with 6-degree ratcheting arc for increased accessibility

3/8” Drive Armstrong Maxx Locking Flex Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of teeth
11-994 1.05 11.625 1.188 1.000 60
• Machined Gear Teeth and high strength steel pawl for superior strength and
consistent performance
• Enclosed head for extreme resistance to dirt
• 9-Position Locking Flex Head maximizes safety and maintains position regardless of load

4-21 Always wear eye protection when near tools in use.

 4
3/8" Drive

3/8” Drive Teardrop Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of teeth
11-972A 0.69 7.625 1.200 0.550 36

3/8” Drive Quick Release Teardrop Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of teeth

Hand Sockets and Drive Tools

11-967A 0.69 7.625 1.200 0.550 36

3/8” Drive Quick Release Teardrop Flex Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of teeth
11-974A 0.94 11.375 1.200 0.550 36

3/8” Drive Black Oxide Teardrop Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of teeth
19-972A 0.69 7.625 1.200 0.550 36

3/8” Drive Round Head Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of teeth
11-915 0.67 7.480 1.270 1.020 41

3/8” Drive Round Head Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of teeth
11-915A 0.69 7.500 1.270 0.780 45

3/8" Drive
3/8” Drive Indexible Head Ratchet
Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of teeth
11-996 0.85 10.000 1.188 1.000 72

4-22
 4
3/8" Drive

3/8” Drive Breaker Bars

Product Weight Overall
Number Lbs. Length (in)
11-918 0.51 8.500
11-918A* 0.63 9.500
ASME B107.10m Fed'l Spec. GGG-W-641e *Knurled Handle

3/8” Drive Black Oxide Breaker Bar

Product Weight Overall
3/8" Drive

Number Lbs. Length (in)

19-918 0.49 8.500
ASME B107.10m Fed'l Spec. GGG-W-641e

3/8” Drive Extensions

Hand Sockets and Drive Tools

Product Weight Overall Product Weight Overall

Number Lbs. Length (in) Number Lbs. Length (in)
11-921 0.09 1.500 11-921A* 0.12 1.750
11-922 0.16 3.000 11-922A* 0.19 3.000
11-923 0.25 6.000 11-923A* 0.31 6.000
11-925 0.32 8.000 11-925A* 0.50 10.000
11-927 0.48 12.000
11-928 0.77 20.000
ASME B107.10m Fed'l Spec. GGG-W-641e *No Knurling

3/8” Drive Flex Extension

Product Weight Overall
Number Lbs. Length (in)
11-929 0.23 7.250
ASME B107.10m Fed'l Spec. GGG-W-641e

11-920
4 Pc. 3/8” Drive Locking Extension Set
Contents: 4 Locking Extensions. Approximate Weight, 2.0 lbs.
Product Number Length Inches Product Number Length Inches
11-934 3.000 11-937 8.000
11-936 6.000 11-939 12.000

3/8” Drive Locking Extensions

Product Length Weight
Number Inches Lbs.
11-934 3.000 0.25
11-936 6.000 0.40
11-937 8.000 0.55
11-939 12.000 0.75

4-23 Always wear eye protection when near tools in use.

 4
3/8" Drive

11-959
5 Pc. 3/8” Drive Wobble Extension Set
Contents: 5 Wobble Extensions. Approximate Weight, 1.3 lbs.
Product Number Length Inches Product Number Length Inches
11-953 1.750 11-956 8.000
11-954 3.000 11-957 12.000
11-955 6.000

Hand Sockets and Drive Tools

3/8” Drive Wobble Extensions
Product Length Weight
Number Inches Lbs.
11-953 1.750 0.09
11-954 3.000 0.16
11-955 6.000 0.25
11-956 8.000 0.32
11-957 12.000 0.48
11-958 18.000 0.68

3/8” Drive Speeder

Product Weight Overall Product Weight Overall
Number Lbs. Length (in) Number Lbs. Length (in)
11-935 0.99 16.750 11-935A* 1.00 16.750
ASME B107.10m Fed'l Spec. GGG-W-641e *Knurled Handle

3/8” Drive T-Handle

Product Weight Overall
Number Lbs. Length
11-938 0.41 7.000
ASME B107.10m Fed'l Spec. GGG-W-641e

3/8" Drive
3/8” Drive (Male/Female) Plastic Handle Driver
Product Weight Overall
Number Lbs. Length
11-943 0.40 6.000
ASME B107.10m Fed'l Spec. GGG-W-641e 3

4-24
 4
3/8" Drive

3/8” Drive Socket Spinner

Product Weight
Number Lbs.
11-945 0.18

3/8” Drive Universal Joint

Product Weight
Number Lbs.
3/8" Drive

11-947 0.15
ASME B107.10m Fed'l Spec. GGG-W-641e

3/8" Drive Adapters

Product Weight Overall
Hand Sockets and Drive Tools

Number Lbs. Description Length (in)

11-951 0.05 3/8"F, 1/4"M 1.015
11-952 0.09 3/8"F, 1/2"M 1.375
ASME B107.10m Fed'l Spec. GGG-W-641e

CAUTION:
Adapting down to a smaller drive size may result in excessive
torque application, causing failure of fastener, socket or adapter.

3/8" Ratchet Repair Kit

SAFETY NOTICE Product Number 11-990
Since ratchets include moving parts, periodic inspection Contains the following parts, with illustrated instruction sheet, for
and, if necessar y, cleaning, lubrication with a light grade repairing the 11-972, 11-973, 11-978, 11-979 or 19-972 Ratchets:
oil, and replacement of worn parts will become necessar y. Gear, Pawl, Shifting Lever, Spring, Ball, Cover Plate, 2 Cover Plate
Parts should not be replaced individually, but rather in total, Screws. In cardboard box. Approximate weight, 0.13 pounds.
and complete Ratchet Repair Kits are available.
3/8" Ratchet Repair Kit
Product Number 11-991
Contains the following parts, with illustrated instruction sheet, for
repairing the 11-974 Flex Head Ratchet: Gear, Pawl, Shifting Lever,
Spring, Ball, Cover Plate, 2 Cover Plate Screws, Groove Pin, Spring
Washer. In cardboard box. Approximate weight, 0.16 pounds.

3/8" Ratchet Repair Kit

Product Number 11-963
Contains the following parts, with illustrated instruction sheet, for
repairing the 11-915 Ratchet: Reversing Lever Plate, Retaining
Spring Gear Unit.

3/8" Armstrong Maxx Ratchet Repair Kit

Product Number 11-982
Contains the following parts, with illustrated instruction sheet, for
repairing the 11-992 and 11-994 Ratchets: Gear, Pawl, Shifting
Lever, Spring, Retaining Plate and Rings, and 2 O-Rings.

3/8" Indexible Ratchet Repair Kit

Product Number 11-983
Contains the following parts, with illustrated instruction sheet, for
repairing the 11-996 Ratchet: Square Drive, Heart-Shaped Spring,
Reversing Cap, Central Screw, and Ratchet Lube.

4-25 Always wear eye protection when near tools in use.

 4
1/2" Drive

1/2” Drive 12 Point Standard Length Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches Lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
12-112 3/8 0.09 0.860 0.600 1.455 0.281 0.400 0.705
12-114 7/16 0.10 0.860 0.670 1.455 0.281 0.400 0.705
12-116 1/2 0.11 0.860 0.748 1.455 0.344 0.400 0.705
12-118 9/16 0.12 0.860 0.812 1.455 0.406 0.400 0.705
12-119 19/32 0.13 0.860 0.860 1.455 0.375 0.450 -
12-120 5/8 0.14 0.870 0.870 1.455 0.469 0.475 -

Hand Sockets and Drive Tools

12-121 21/32 0.15 0.930 0.930 1.455 0.469 0.475 -
12-122 11/16 0.15 0.956 0.956 1.455 0.469 0.500 -
12-124 3/4 0.20 1.037 1.037 1.455 - 0.800 -
12-125 25/32 0.21 1.125 1.125 1.455 - 0.800 -
12-126 13/16 0.21 1.125 1.125 1.455 - 0.800 -
12-128 7/8 0.22 1.173 1.173 1.455 - 0.800 -
12-130 15/16 0.27 1.256 1.256 1.496 - 0.827 -
12-132 1 0.31 1.307 1.307 1.614 - 0.846 -
12-134 1-1/16 0.43 1.410 1.410 1.614 - 0.900 -
12-136 1-1/8 0.42 1.480 1.480 1.654 - 1.000 -
12-138 1-3/16 0.49 1.563 1.563 1.710 - 1.000 -
12-140 1-1/4 0.58 1.650 1.650 1.715 - 1.000 -
12-142 1-5/16 0.76 1.750 1.750 2.125 1.062 0.850 -
12-144 1-3/8 0.90 1.812 1.812 2.125 1.064 0.875 -
12-146 1-7/16 0.99 1.938 1.938 2.187 1.064 0.907 -
12-148 1-1/2 1.08 2.000 2.000 2.250 1.064 0.907 -
ASME B107.1 Fed'l Spec. GGG-W-641e

1/2” Drive 6 Point Standard Length Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches Lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
12-012 3/8 0.10 0.860 0.600 1.455 0.281 0.400 0.705
12-014 7/16 0.10 0.860 0.670 1.455 0.281 0.400 0.705
12-016 1/2 0.12 0.860 0.748 1.455 0.266 0.400 0.705
12-018 9/16 0.13 0.860 0.812 1.455 0.328 0.400 0.705
12-020 5/8 0.14 0.870 0.870 1.455 0.375 0.480 -
12-022 11/16 0.16 0.956 0.956 1.455 0.375 0.500 -
12-024 3/4 0.19 1.037 1.037 1.455 - 0.800 -
12-026 13/16 0.22 1.125 1.125 1.455 - 0.800 -

1/2" Drive
12-028 7/8 0.23 1.173 1.173 1.455 - 0.800 -
12-030 15/16 0.27 1.256 1.256 1.496 - 0.827 -
12-032 1 0.33 1.307 1.307 1.614 - 0.846 -
12-034 1-1/16 0.40 1.410 1.410 1.614 - 0.900 -
12-036 1-1/8 0.44 1.480 1.480 1.654 - 1.000 -
12-038 1-3/16 0.49 1.563 1.563 1.710 - 1.000 -
12-040 1-1/4 0.58 1.650 1.650 1.715 - 1.000 -
12-042 1-5/16 0.79 1.750 1.750 2.062 1.062 0.820 -
12-044 1-3/8 0.89 1.812 1.812 2.125 1.062 0.960 -
12-046 1-7/16 1.07 1.938 1.938 2.187 1.062 0.960 -
12-048 1-1/2 1.17 2.000 2.000 2.250 1.062 0.960 -
ASME B107.1 Fed'l Spec. GGG-W-641e

4-26
 4
1/2" Drive

1/2” Drive 12 Point Deep Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches Lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
12-312 3/8 0.21 0.860 0.600 3.185 0.297 0.500 0.810
12-314 7/16 0.23 0.860 0.670 3.185 0.297 0.500 0.810
12-316 1/2 0.27 0.860 0.737 3.185 0.480 0.520 0.810
12-318 9/16 0.27 0.860 0.812 3.185 0.540 0.520 0.810
12-320 5/8 0.25 0.860 0.860 3.205 0.625 1.200 -
12-322 11/16 0.29 0.956 0.956 3.205 0.650 1.450 -
12-324 3/4 0.42 1.037 1.037 3.205 0.650 1.700 -
1/2" Drive

12-326 13/16 0.41 1.115 1.115 3.205 0.770 1.800 -

12-328 7/8 0.48 1.173 1.173 3.205 0.770 1.800 -
12-330 15/16 0.55 1.256 1.256 3.235 0.870 1.300 -
12-332 1 0.63 1.307 1.307 3.235 0.870 1.300 -
12-334 1-1/16 0.70 1.410 1.410 3.235 0.990 1.600 -
12-336 1-1/8 0.75 1.490 1.490 3.235 1.053 1.600 -
12-338 1-3/16 0.93 1.563 1.563 3.235 0.797 0.844 -
12-340 1-1/4 1.29 1.687 1.687 3.235 0.922 0.875 -
Hand Sockets and Drive Tools

12-342 1-5/16 1.35 1.750 1.750 3.235 0.922 0.940 -

12-344 1-3/8 1.40 1.812 1.812 3.218 1.060 1.125 -
12-346 1-7/16 1.53 1.938 1.938 3.218 1.060 1.125 -
12-348 1-1/2 1.68 2.000 2.000 3.218 1.060 1.125 -
ASME B107.1 Fed'l Spec. GGG-W-641e

1/2 ” Drive 6 Point Deep Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches Lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
12-212 3/8 0.30 0.860 0.600 3.185 0.297 0.570 0.810
12-214 7/16 0.31 0.860 0.670 3.185 0.297 0.500 0.810
12-216 1/2 0.31 0.860 0.737 3.185 0.480 0.500 0.810
12-218 9/16 0.29 0.860 0.812 3.185 0.540 0.500 0.810
12-220 5/8 0.28 0.860 0.860 3.205 0.625 1.200 -
12-222 11/16 0.32 0.956 0.956 3.205 0.650 1.450 -
12-224 3/4 0.40 1.037 1.037 3.205 0.650 1.700 -
12-226 13/16 0.44 1.115 1.115 3.205 0.770 1.800 -
12-228 7/8 0.50 1.173 1.173 3.205 0.770 1.800 -
12-230 15/16 0.58 1.256 1.256 3.235 0.870 1.300 -
12-232 1 0.65 1.307 1.307 3.235 0.870 1.300 -
12-234 1-1/16 0.75 1.410 1.410 3.235 0.990 1.700 -
12-236 1-1/8 0.81 1.490 1.490 3.235 1.053 1.700 -
12-238 1-3/16 0.87 1.563 1.563 3.235 0.797 0.844 -
12-240 1-1/4 1.31 1.687 1.687 3.235 0.922 0.875 -
12-242 1-5/16 1.35 1.750 1.750 3.218 1.060 1.125 -
12-244 1-3/8 1.42 1.812 1.812 3.218 1.060 1.125 -
12-246 1-7/16 1.51 1.938 1.938 3.218 1.060 1.125 -
12-248 1-1/2 1.73 2.000 2.000 3.218 1.060 1.125 -
ASME B107.1 Fed'l Spec. GGG-W-641e

4-27 Always wear eye protection when near tools in use.

 4
1/2" Drive

1/2” Drive 8 Point Standard Length Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches Lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
12-410 5/16 0.13 0.866 0.637 1.330 0.188 0.375 0.580
12-412 3/8 0.14 0.866 0.678 1.330 0.297 0.406 0.580
12-414 7/16 0.12 0.866 0.755 1.372 0.443 0.257 0.622
12-416 1/2 0.12 0.859 0.859 1.372 0.485 0.400 -
12-418 9/16 0.14 0.927 0.927 1.372 0.485 0.479 -
12-420 5/8 0.20 1.031 1.031 1.372 0.485 0.375 -

Hand Sockets and Drive Tools

12-422 11/16 0.21 1.123 1.123 1.372 0.695 0.710 -
12-424 3/4 0.23 1.185 1.185 1.378 - 0.670 -
12-426 13/16 0.47 1.390 1.390 1.625 0.609 0.512 -
12-428 7/8 0.48 1.472 1.472 1.750 0.672 0.590 -
12-432 1 0.67 1.625 1.625 1.750 0.672 0.632 -
ASME B107.1 Fed'l Spec. GGG-W-641e

1/2” Drive Spark Plug Socket with Rubber Insert

A B C D
Product Weight Opening Drive End Wrench Overall Wrench
Number Lbs. Inches Diameter (in) End (in) Length (in) Depth (in)
12-504 0.27 13/16 0.867 1.057 2.500 0.525
Fed’l Spec. GGG-W-641e

1/2" Drive
1/2 ” Drive 12 Point Universal Sockets
A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches Lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
12-516 1/2 0.24 0.940 0.750 2.312 0.438 0.312 0.406
12-518 9/16 0.24 0.940 0.844 2.375 0.438 0.375 0.468
12-520 5/8 0.25 0.940 0.875 2.437 0.500 0.437 0.531
12-522 11/16 0.26 0.940 0.940 2.500 0.500 0.468 -
12-524 3/4 0.27 0.940 1.062 2.562 0.500 0.531 0.781
ASME B107.1 Fed'l Spec. GGG-W-641e

4-28
 4
1/2" Drive

1/2” Drive Crowfoot Wrenches

A B1 B2 C1 C2
Product Opening Weight Overall Head Handle Head Handle
Number Inches Lbs. Length (in) Width (in) Width (in) Thickness (in) Thickness (in)
12-859 15/16 0.39 2.812 1.937 1.000 0.500 0.625
12-860 1 0.38 2.812 1.937 1.000 0.500 0.625
12-861 1-1/16 0.53 2.875 2.218 1.000 0.609 0.562
12-862 1-1/8 0.53 2.875 2.218 1.000 0.609 0.562
12-863 1-1/4 0.46 2.875 2.218 1.000 0.609 0.562
12-866 1-7/16 0.70 3.406 2.718 1.000 0.609 0.562
12-867 1-1/2 0.67 3.406 2.718 1.000 0.609 0.562
1/2" Drive

ASME B107.21 Fed'l Spec. GGG-C-1507b

Hand Sockets and Drive Tools

1/2” Drive Flare Nut Crowfoot Wrenches

A B C D
Product Opening Weight Head Head Slot Length of
Number Inches Lbs. Diameter (in) Thickness (in) Width (in) Centers (in)
12-840 1-1/8 0.19 1.625 0.875 0.844 1.156
12-841 1-3/16 0.19 1.688 0.875 0.906 1.188
12-842 1-1/4 0.19 1.781 0.875 0.938 1.234
12-843 1-5/16 0.19 1.844 0.875 0.969 1.266
12-844 1-3/8 0.25 1.938 0.938 1.063 1.313
12-845 1-7/16 0.25 2.000 0.938 1.063 1.344
12-846 1-1/2 0.25 2.063 0.938 1.125 1.375
12-847 1-9/16 0.31 2.156 0.938 1.156 1.422
12-848 1-5/8 0.31 2.219 0.938 1.219 1.453
12-849 1-11/16 0.31 2.313 1.000 1.313 1.516
12-850 1-3/4 0.38 2.375 1.000 1.313 1.547
12-851 1-13/16 0.38 2.469 1.000 1.344 1.594
12-852 1-7/8 0.44 2.563 1.063 1.375 1.641
12-853 1-15/16 0.50 2.625 1.063 1.438 1.672
12-854 2 0.50 2.719 1.063 1.563 1.719
ASME B107.21 Fed'l Spec. GGG-C-1507b

4-29 Always wear eye protection when near tools in use.

 4
1/2" Drive

1/2” Drive Extra Long Hex Driver Sockets

A B C D E
Product Bit Size Weight Drive Nose Overall Bit Length to Replacement
Number Inches Lbs. End (in) Dia. (in) Length (in) Length (in) Shoulder (in) Bit
12-753 1/4 0.19 0.860 0.611 5.000 4.000 0.650 94-253
12-754 5/16 0.24 0.860 0.709 5.000 4.000 0.650 94-254
12-755 3/8 0.33 0.860 0.808 6.000 5.000 0.650 94-255
12-757 1/2 0.50 1.048 - 6.000 4.900 - 94-257
12-758 9/16 0.75 1.048 - 6.960 5.875 - 94-258
12-759 5/8 1.14 1.312 - 6.960 5.813 - 94-259

Hand Sockets and Drive Tools

1/2” Drive Standard Length Hex Driver Sockets
A B C D E
Product Bit Size Weight Drive Nose Overall Bit Length to Replacement
Number Inches Lbs. End (in) Dia. (in) Length (in) Length (in) Shoulder (in) Bit
12-713 1/4 0.16 0.860 0.611 3.250 2.250 0.650 94-213
12-714 5/16 0.19 0.860 0.709 3.250 2.250 0.650 94-214
12-715 3/8 0.23 0.860 0.808 3.250 2.250 0.650 94-215
12-716 7/16 0.25 0.860 0.808 3.250 2.250 0.650 94-216
12-717 1/2 0.48 1.048 - 3.710 2.625 - 94-217
12-718 9/16 0.50 1.048 - 3.710 2.625 - 94-218
12-719 5/8 0.83 1.312 - 3.960 2.813 - 94-219
12-721 3/4 0.94 1.312 - 3.960 2.813 - 94-221

1/2" Drive
1/2” Drive Standard Length Torx® Driver Sockets
A B C D E
Product Bit Size Weight Drive Nose Overall Bit Length to Replacement
Number Inches Lbs. End (in) Dia. (in) Length (in) Length (in) Shoulder (in) Bit
12-878 T27 0.14 0.860 0.611 2.000 1.000 0.650 94-178
12-880 T30 0.14 0.860 0.611 2.000 1.000 0.650 94-180
12-882 T40 0.16 0.860 0.709 2.250 1.250 0.650 94-182
12-884 T45 0.16 0.860 0.709 2.250 1.250 0.650 94-184
12-886 T50 0.16 0.860 0.709 2.250 1.250 0.650 94-186
12-888 T55 0.39 1.048 - 2.580 1.500 - 94-188
12-890 T60 0.39 1.048 - 2.580 1.500 - 94-190
TORX® is the registered trademark of Acument Intellectual Properties, LLC.

4-30
 4
1/2" Drive

1/2” Drive Screwdriver Sockets

A B C D E
Product Bit Size Weight Drive Nose Overall Bit Length to Replacement
Number Inches Lbs. End (in) Dia. (in) Length (in) Length (in) Shoulder (in) Bit
12-802 1/4x1/32 0.18 0.860 0.709 2.950 1.940 0.650 94-102
12-803 5/16x3/64 0.18 0.860 0.709 2.950 1.940 0.650 94-103
12-805 3/8x1/16 0.18 0.860 0.709 2.950 1.940 0.650 94-105
Fed'l Spec. GGG-W-001222
1/2" Drive
Hand Sockets and Drive Tools

1/2” Drive Phillips Screwdriver Sockets

A B C D E
Product Bit Size Weight Drive Nose Overall Bit Length to Replacement
Number Inches Lbs. End (in) Dia. (in) Length (in) Length (in) Shoulder (in) Bit
12-821 Phil. #1 0.19 0.860 0.709 2.400 1.400 0.650 94-121
12-822 Phil. #2 0.19 0.860 0.709 2.400 1.400 0.650 94-122
12-825 Phil. #3 0.19 0.860 0.709 2.400 1.400 0.650 94-125
12-828 Phil. #4 0.19 0.860 0.709 2.400 1.400 0.650 94-128
Fed'l Spec. GGG-W-001222

1/2” Drive “drag link” Screwdriver Sockets

Product Weight Blade Size, Blade Size
Number Lbs. Width (in) Length (in)
12-892 0.19 7/64 15/16
12-893 0.35 3/32 1-1/4

4-31 Always wear eye protection when near tools in use.

 4
1/2" Drive

1/2” Drive 12 Point Black Oxide Standard Length Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches Lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
20-112 3/8 0.09 0.860 0.580 1.485 0.282 0.400 0.725
20-114 7/16 0.10 0.860 0.670 1.485 0.290 0.400 0.725
20-116 1/2 0.11 0.860 0.745 1.485 0.350 0.400 0.725
20-118 9/16 0.13 0.860 0.812 1.485 0.480 0.400 0.725
20-120 5/8 0.15 0.860 0.860 1.485 0.480 0.450 -
20-122 11/16 0.16 0.956 0.956 1.485 0.480 0.470 -

Hand Sockets and Drive Tools

20-124 3/4 0.20 1.037 1.037 1.485 - 0.800 -
20-126 13/16 0.22 1.115 1.115 1.485 - 0.800 -
20-128 7/8 0.24 1.173 1.173 1.485 - 0.800 -
20-130 15/16 0.27 1.256 1.256 1.496 - 0.827 -
20-132 1 0.32 1.307 1.307 1.614 - 0.846 -
20-134 1-1/16 0.35 1.410 1.410 1.614 - 0.900 -
20-136 1-1/8 0.43 1.490 1.490 1.640 - 1.000 -
20-140 1-1/4 0.58 1.650 1.650 1.750 - 1.000 -
20-142 1-5/16 0.80 1.750 1.750 2.125 1.062 0.850 -
20-144 1-3/8 1.02 1.812 1.812 2.125 1.062 0.875 -
20-146 1-7/16 1.06 1.938 1.938 2.187 1.062 0.907 -
20-148 1-1/2 1.06 2.000 2.000 2.250 1.062 0.907 -
ASME B107.1 Fed'l Spec. GGG-W-641e

1/2” Drive 12 Point Black Oxide Deep Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches Lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
20-312 3/8 0.21 0.860 0.580 3.185 0.297 0.500 0.850
20-314 7/16 0.23 0.860 0.670 3.185 0.312 0.500 0.850
20-316 1/2 0.25 0.860 0.745 3.185 0.480 0.520 0.850
20-318 9/16 0.26 0.860 0.812 3.185 0.540 0.520 0.850
20-320 5/8 0.28 0.860 0.860 3.205 0.625 1.200 -
20-322 11/16 0.31 0.956 0.956 3.205 0.650 1.450 -
20-324 3/4 0.42 1.037 1.037 3.205 0.650 1.700 -
20-326 13/16 0.45 1.115 1.115 3.205 0.770 1.800 -
20-328 7/8 0.50 1.173 1.173 3.205 0.770 1.800 -
20-330 15/16 0.56 1.256 1.256 3.235 0.870 1.300 -
20-332 1 0.63 1.307 1.307 3.235 0.870 1.300 -
20-334 1-1/16 0.72 1.410 1.410 3.235 0.990 1.600 -
20-336 1-1/8 0.78 1.490 1.490 3.235 1.053 1.600 -

1/2" Drive
20-340 1-1/4 1.29 1.687 1.687 3.235 0.800 0.875 -
ASME B107.1 Fed'l Spec. GGG-W-641e

1/2” Drive 12 Point Black Oxide Universal Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches Lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
20-516 1/2 0.24 0.940 0.750 2.312 0.438 0.312 0.406
20-518 9/16 0.24 0.940 0.844 2.375 0.438 0.375 0.468
20-520 5/8 0.25 0.940 0.875 2.437 0.500 0.437 0.531
20-522 11/16 0.26 0.940 0.940 2.500 0.500 0.468 -
20-524 3/4 0.27 0.940 1.062 2.562 0.500 0.531 0.781

4-32
 4
1/2" Drive

1/2” Drive 12 Point Standard Length Sockets METRIC

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number mm g End (mm) End (mm) Length (mm) Clearance (mm) Depth (mm) Shoulder( mm)
39-110 10 41 21.8 15.9 37.0 8.0 10.2 17.9
39-111 11 45 21.8 18.0 37.0 8.9 10.2 17.9
39-112 12 50 21.8 18.5 37.0 8.9 10.2 17.9
39-113 13 50 21.8 18.8 37.0 11.4 10.2 17.9
39-114 14 59 21.8 20.9 37.0 11.4 10.2 17.9
39-115 15 73 21.8 21.8 37.0 12.6 10.2 -
39-116 16 68 22.1 22.1 37.0 12.7 11.4 -
1/2" Drive

39-117 17 68 23.5 23.5 37.0 12.7 11.4 -

39-118 18 77 25.5 25.5 37.0 12.7 11.4 -
39-119 19 91 26.3 26.3 37.0 - 19.1 -
39-120 20 100 27.3 27.3 37.0 - 19.1 -
39-121 21 109 28.6 28.6 37.0 - 20.3 -
39-122 22 145 29.8 29.8 37.0 - 20.3 -
39-123 23 154 31.0 31.0 38.0 - 21.0 -
39-124 24 168 31.9 31.9 38.0 - 22.0 -
Hand Sockets and Drive Tools

39-125 25 181 33.3 33.3 41.0 - 23.0 -

39-126 26 190 35.7 35.7 41.0 - 22.9 -
39-127 27 204 35.7 35.7 41.0 - 22.9 -
39-128 28 228 37.6 37.6 42.5 - 22.9 -
39-129 29 246 37.6 37.6 42.5 - 22.9 -
39-130 30 268 39.1 39.1 42.5 - 22.9 -
39-132 32 381 41.7 41.7 44.2 - 24.1 -
39-136 36 417 41.7 41.7 50.8 - 24.1 -
ASME B107.5m

1/2” Drive 6 Point Standard Length Sockets METRIC

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number mm g End (mm) End (mm) Length (mm) Clearance (mm) Depth (mm) Shoulder( mm)
39-010 10 45 21.8 15.9 37.0 8.0 10.2 17.9
39-011 11 45 21.8 18.0 37.0 8.9 10.2 17.9
39-012 12 54 21.8 18.5 37.0 8.9 10.2 17.9
39-013 13 54 21.8 18.8 37.0 11.4 10.2 17.9
39-014 14 59 21.8 20.9 37.0 11.4 10.2 17.9
39-015 15 68 21.8 21.8 37.0 12.6 10.2 -
39-016 16 73 22.1 22.1 37.0 12.7 11.4 -
39-017 17 73 23.5 23.5 37.0 12.7 11.4 -
39-018 18 77 25.5 25.5 37.0 12.7 11.4 -
39-019 19 95 26.3 26.3 37.0 - 19.1 -
39-020 20 100 27.3 27.3 37.0 - 19.1 -
39-021 21 114 28.6 28.6 37.0 - 20.3 -
39-022 22 155 29.8 29.8 37.0 - 20.3 -
39-023 23 164 31.0 31.0 38.0 - 21.0 -
39-024 24 168 31.9 31.9 38.0 - 22.0 -
39-025 25 186 33.3 33.3 41.0 - 23.0 -
39-026 26 200 35.3 35.3 46.1 19.1 17.0 -
39-027 27 209 36.4 36.4 46.1 19.1 17.0 -
39-028 28 232 37.5 37.5 48.3 20.7 18.3 -
39-029 29 255 38.1 38.1 49.5 20.7 18.3 -
39-030 30 277 38.1 38.1 50.8 20.7 18.3 -
39-032 32 395 42.9 42.9 50.8 23.8 21.1 -
39-036 36 426 49.2 49.2 55.5 25.4 24.6 -
ASME B107.5m

4-33 Always wear eye protection when near tools in use.

 4
1/2" Drive

1/2” Drive 12 Point Deep Sockets METRIC

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number mm g End (mm) End (mm) Length (mm) Clearance (mm) Depth (mm) Shoulder( mm)
39-310 10 95 21.8 15.9 81.4 7.4 11.4 21.1
39-311 11 104 21.8 18.0 81.4 8.1 12.7 21.1
39-312 12 109 21.8 18.5 81.4 10.3 13.7 21.1
39-313 13 113 21.8 18.8 81.4 10.3 11.9 21.1
39-314 14 118 21.8 20.9 81.4 10.3 11.9 21.1
39-315 15 113 21.8 21.8 81.4 10.7 30.5 -

Hand Sockets and Drive Tools

39-316 16 122 22.1 22.1 81.4 11.9 30.5 -
39-317 17 127 23.5 23.5 81.4 12.3 30.5 -
39-318 18 168 25.5 25.5 81.4 16.5 30.5 -
39-319 19 191 26.3 26.3 81.4 16.5 35.6 -
39-320 20 195 27.3 27.3 81.4 16.5 35.6 -
39-321 21 195 28.6 28.6 81.4 19.6 38.1 -
39-322 22 222 29.8 29.8 81.4 19.6 38.1 -
39-323 23 231 31.0 31.0 82.2 19.2 35.0 -
39-324 24 245 31.8 31.8 82.2 22.1 35.0 -
39-325 25 272 33.2 33.2 82.2 22.1 35.0 -
39-326 26 308 34.9 34.9 82.6 22.4 30.5 -
39-327 27 345 35.6 35.6 82.2 20.7 41.0 -
39-328 28 369 37.5 37.5 82.6 22.4 30.5 -
39-329 29 432 38.9 38.9 82.6 22.6 31.8 -
39-330 30 535 38.9 38.9 82.6 22.6 30.5 -
39-332 32 585 42.8 42.8 82.2 25.0 25.0 -
ASME B107.5m

1/2” Drive Extra Long Hex Driver Sockets METRIC

A B C D E
Product Opening Weight Drive Nose Overall Bit Length to Replacement
Number mm g End (mm) Dia. (mm) Length (mm) Length (mm) Shoulder( mm) Bit
39-751 6 85 21.8 15.5 126.0 101.6 16.5 94-751
39-753 8 108 21.8 18.0 126.0 101.6 16.5 94-753
39-755 10 156 21.8 20.5 152.0 127.0 16.5 94-755
39-757 12 269 26.6 - 152.0 124.5 - 94-757
39-759 14 335 26.6 - 178.0 149.2 - 94-759
39-762 17 555 33.3 - 178.0 147.7 - 94-762

1/2” Drive Standard Length Hex Driver Sockets METRIC 1/2" Drive
A B C D E
Product Opening Weight Drive Nose Overall Bit Length to Replacement
Number mm g End (mm) Dia. (mm) Length (mm) Length (mm) Shoulder( mm) Bit
39-711 6 74 21.8 15.5 81.0 56.4 16.5 94-711
39-713 8 88 21.8 18.0 81.0 56.4 16.5 94-713
39-715 10 108 21.8 20.5 81.0 56.4 16.5 94-715
39-717 12 207 26.6 - 93.0 65.9 - 94-717
39-719 14 224 26.6 - 93.0 65.9 - 94-719
39-722 17 400 33.3 - 100.0 71.5 - 94-722
39-724 19 430 33.3 - 100.0 71.5 - 94-724

4-34
 4
1/2" Drive

1/2” Drive Teardrop Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of Teeth
12-972 1.46 10.500 1.625 0.875 36
ASME B107.10m Fed'l Spec. GGG-W-641e

1/2” Drive Long Handle Teardrop Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of Teeth
1/2" Drive

12-973 2.21 15.000 1.625 0.875 36

ASME B107.10m Fed'l Spec. GGG-W-641e

1/2” Drive Flex Head Teardrop Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of Teeth
Hand Sockets and Drive Tools

12-974 2.02 14.250 1.625 0.875 36

ASME B107.10m Fed'l Spec. GGG-W-641e

1/2” Drive Black Oxide Teardrop Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of Teeth
20-972 1.13 10.500 1.625 0.875 36
ASME B107.10m Fed'l Spec. GGG-W-641e

1/2” Drive Armstrong Maxx Standard Handle Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of teeth
12-992 1.60 10.188 1.625 1.250 60
• Machined gear teeth and high strength steel pawl for superior strength and
consistent performance
• Enclosed head for extreme resistance to dirt
• Sleek tapered head design with 6-degree ratcheting arc for increased accessibility

1/2” Drive Armstrong Maxx Locking Flex Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of teeth
12-994 2.55 18.500 1.625 1.250 60
• Machined gear teeth and high strength steel pawl for superior strength and
consistent performance
• Enclosed head for extreme resistance to dirt
• 9-Position Locking Flex Head maximizes safety and maintains position regardless of load

1/2” Drive Teardrop Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of Teeth
12-975A 1.31 10.300 1.800 0.780 36
ASME B107.10m Fed'l Spec. GGG-W-641e

4-35 Always wear eye protection when near tools in use.

 4
1/2" Drive

1/2” Drive Black Oxide Teardrop Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of Teeth
20-973A 1.31 10.300 1.800 0.780 36
ASME B107.10m Fed'l Spec. GGG-W-641e

1/2” Drive Teardrop Quick Release Ratchet

Product Weight Overall Head Head Number

Hand Sockets and Drive Tools

Number Lbs. Length (in) Width (in) Depth (in) of Teeth
12-967A 1.31 10.300 1.800 0.780 36
ASME B107.10m Fed'l Spec. GGG-W-641e

1/2” Drive Teardrop Quick Release Flex Head Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of Teeth
12-974A 2.25 16.750 1.800 0.780 36
ASME B107.10m Fed'l Spec. GGG-W-641e

1/2” Drive Round Head Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of teeth
12-915 1.73 10.480 1.750 1.300 45

1/2” Drive Round Head Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of teeth
12-916A 0.69 7.500 1.700 1.000 45

1/2” Drive Indexible Head Ratchet

1/2" Drive
Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of teeth
12-996 1.85 12.000 1.500 1.500 72

1/2” Drive Black Oxide Spud Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of Teeth
12-907 1.80 14.000 1.625 0.875 24
ASME B107.10m Fed'l Spec. GGG-W-641e

1/2" Drive Scaffold Ratchet

Product Weight Overall Head Head Number Socket Socket
Number Lbs. Length (in) Width (in) Depth (in) of Teeth Size (in) Length (in)
12-988 2.28 11.500 1.635 0.875 36 7/8 2.156

4-36
 4
1/2" Drive

1/2” Drive Breaker Bars

Product Weight Overall Product Weight Overall
Number Lbs. Length (in) Number Lbs. Length (in)
12-917 1.55 12.000 12-917A* 1.51 15.000
12-918 1.97 17.000 12-918A* 1.69 18.000
ASME B107.10m Fed'l Spec. GGG-W-641e *Knurled Handle

1/2” Drive Black Oxide Breaker Bar

Product Weight Overall
Number Lbs. Length
1/2" Drive

20-918 1.86 17.000

ASME B107.10m Fed'l Spec. GGG-W-641e

1/2” Drive Extensions

Product Weight Overall Product Weight Overall
Hand Sockets and Drive Tools

Number Lbs. Length (in) Number Lbs. Length (in)

12-921 0.24 2.000 12-923A* 0.56 6.000
12-923 0.38 5.000 12-924A* 0.94 10.000
12-924 0.67 10.000
12-927 1.18 20.000
ASME B107.10m Fed'l Spec. GGG-W-641e *No Knurling

12-920
4 Pc. 1/2” Drive Locking Extension Set
Contents: 4 Locking Extensions. Approximate Weight, 3.6 lbs.
Product Number Length Inches Product Number Length Inches
12-931 3.000 12-937 10.000
12-936 5.000 12-939 15.000

1/2” Drive Locking Extensions

Product Weight Length
Number Lbs. Inches (in)
12-931 0.35 3.000
12-936 0.60 5.000
12-937 1.05 10.000
12-939 1.55 16.000

12-989
3 Pc. 1/2” Drive Wobble Extension Set
Contents: 3 Wobble Extensions. Approximate Weight, 1.33 lbs.
Product Number Length Inches
12-984 2.500
12-985 5.000
12-986 10.000

1/2” Drive Wobble Extensions

Product Weight Length
Number Lbs. Inches (in)
12-984 0.28 2.500
12-985 0.38 5.000
12-986 0.67 10.000
12-987 1.18 20.000

4-37 Always wear eye protection when near tools in use.

 4
1/2" Drive

1/2” Drive Speeder

Product Weight Overall Product Weight Overall
Number Lbs. Length (in) Number Lbs. Length (in)
12-935 2.02 19.000 12-935A* 1.75 19.560
ASME B107.10m Fed'l Spec. GGG-W-641e *Knurled Handle

1/2” Drive T-Handle

Product Weight Overall

Hand Sockets and Drive Tools

Number Lbs. Length (in)
12-938 1.030 15.000
ASME B107.10m Fed'l Spec. GGG-W-641e

1/2” Drive Socket Spinner

Product Weight Overall
Number Lbs. Length (in)
12-945 0.29 1.625

1/2” Drive Universal Joint

Product Weight
Number Lbs.
12-947 0.30
ASME B107.10m Fed'l Spec. GGG-W-641e

1/2" Drive Stud Remover, 1/2”-3/4” Stud Dia.

Product Weight
Number Lbs.
12-948 0.52

1/2" Drive Adapters 1/2" Drive

Product Weight Overall
Number Lbs. Description Length (in)
12-951 0.15 1/2"F. 3/8"M 1.400
12-952 0.34 1/2"F. 3/4"M 1.850
ASME B107.10m Fed'l Spec. GGG-w-641e

CAUTION:
Adapting down to a smaller drive size may result in excessive
torque application, causing failure of fastener, socket or adapter.

4-38
 4
1/2" Drive

1/2" Drive Ratchet Repair Kit

Product Number 20-966
Contains the following parts, with instructions, for repairing 12-907
Ratchet: Gear, 2 Springs, Shifting Lever, Shifter, 2 Pawls, Face Plate, 2
Plate Screws, and 2 Lock Washers. In plastic bag. Approximate weight,
0.28 Ibs.

1/2" Drive Ratchet Repair Kit

Product Number 12-990
1/2" Drive

Contains the following parts, with illustrated instruction sheet, for

repairing the 12-972, 12-973 or 20-972 Ratchets: Gear, Pawl, Shifting
Lever, Spring, Ball, Cover Plate, 2 Cover Plate Screws. In cardboard
box. Approximate weight, 0.31 pounds.

1/2" Drive Ratchet Repair Kit

Hand Sockets and Drive Tools

Product Number 12-991

Contains the following parts, with illustrated instruction sheet, for
repairing the 12-974 Flex Head Ratchet: Gear, Pawl, Shifting Lever,
Spring, Ball, Cover Plate, 2 Cover Plate Screws, Groove Pin, Spring
Washer. In cardboard box. Approximate weight, 0.16 pounds.

1/2" Drive Round Head Ratchet Repair Kit

Product Number 12-963
Contains the following parts, with instruction sheet, for repairing 12-
915 Ratchet: Reversing Lever Plate, Retaining Spring, Gear Unit.

1/2" Drive Armstrong Maxx Ratchet Repair Kit

Product Number 12-982
Contains the following parts, with instruction sheet, for repairing 12-
992 and 12-994 Ratchets: Gear, Pawl, Shifting Lever, Spring, Retaining
Plate and Rings, and 2 O-Rings.

1/2" Drive Indexible Ratchet Repair Kit

Product Number 12-983
Contains the following parts, with instructions, for repairing 12-996
Ratchet: Square Drive, Heart-Shaped Spring, Reversing Cap, Central
Screw and Ratchet Lube.

SAFETY NOTICE
Since ratchets include moving parts, periodic inspection and, if
necessar y, cleaning, lubrication with a light grade
oil, and replacement of worn parts will become necessar y. Parts
should not be replaced individually, but rather in total, and
complete Ratchet Repair Kits are available.

4-39 Always wear eye protection when near tools in use.

 4
3/4" Drive

3/4” Drive 12 Point Standard Length Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches Lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
13-124 3/4 0.32 1.290 1.187 1.900 0.625 0.540 0.813
13-126 13/16 0.37 1.295 1.295 1.937 0.625 0.540 -
13-128 7/8 0.38 1.375 1.375 1.968 0.688 0.540 -
13-130 15/16 0.43 1.390 1.390 1.968 0.688 0.650 -
13-132 1 0.57 1.480 1.480 2.000 0.688 0.650 -
13-134 1-1/16 0.63 1.540 1.540 2.094 0.688 0.650 -

Hand Sockets and Drive Tools

13-136 1-1/8 0.69 1.540 1.640 2.125 1.062 0.750 0.625
13-138 1-3/16 0.75 1.540 1.640 2.188 1.062 0.750 0.625
13-140 1-1/4 0.70 1.573 1.853 2.170 1.250 1.000 1.370
13-142 1-5/16 0.80 1.573 1.903 2.233 1.312 1.100 1.410
13-144 1-3/8 0.80 1.573 1.903 2.233 1.375 1.100 1.410
13-146 1-7/16 0.80 1.573 2.063 2.295 1.440 1.200 1.390
13-148 1-1/2 0.90 1.603 2.098 2.295 1.500 1.200 1.390
13-150 1-9/16 0.90 1.648 2.098 2.420 1.560 1.200 1.540
13-152 1-5/8 0.90 1.633 2.213 2.485 1.620 1.200 1.540
13-154 1-11/16 1.00 1.633 2.313 2.485 1.680 1.200 1.490
13-156 1-3/4 1.10 1.663 2.393 2.640 1.750 1.300 1.620
13-158 1-13/16 1.20 1.758 2.495 2.795 1.810 1.400 1.770
13-160 1-7/8 1.40 1.758 2.590 2.860 1.880 1.500 1.780
13-164 2 1.40 1.758 2.690 2.985 2.000 1.600 1.860
13-166 2-1/16 1.90 1.948 2.730 3.015 2.060 1.600 1.960
13-168 2-1/8 2.00 1.948 2.855 3.045 2.120 1.600 1.930
13-170 2-3/16 2.00 1.948 2.855 3.045 2.180 1.700 1.930
13-172 2-1/4 2.30 1.948 3.030 3.170 2.250 1.700 1.970
13-174 2-5/16 2.30 1.948 3.020 3.235 2.310 1.700 2.040
13-176 2-3/8 2.40 1.948 3.030 3.235 2.380 1.700 2.030
ASME B107.1 Fed'l Spec. GGG-W-641e

3/4” Drive 12 Point Deep Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches Lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
13-328 7/8 0.71 1.375 1.375 3.375 0.840 1.000 -
13-330 15/16 0.72 1.390 1.390 3.375 0.840 1.000 -
13-332 1 0.81 1.480 1.480 3.375 0.880 1.150 -
13-334 1-1/16 0.91 1.540 1.540 3.500 0.880 1.150 -

3/4" Drive
13-336 1-1/8 1.10 1.625 1.625 3.500 0.796 0.875 -
13-340 1-1/4 1.18 1.562 1.750 3.500 1.060 1.150 0.625
13-342 1-5/16 1.23 1.562 1.875 3.500 1.280 1.250 0.625
13-344 1-3/8 1.37 1.562 1.875 3.500 1.300 1.250 0.625
13-346 1-7/16 1.40 1.562 2.000 3.500 1.300 1.250 0.625
13-348 1-1/2 1.74 1.562 2.010 3.500 1.300 1.250 0.625
13-352 1-5/8 2.12 2.250 2.250 3.500 1.046 1.187 -
ASME B107.1 Fed'l Spec. GGG-W-641e

4-40
 4
3/4" Drive

3/4” Drive 12 Point Standard Length Sockets METRIC

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number mm g End (mm) End (mm) Length Clearance (mm) Depth (mm) Shoulder (mm)
40-119 19 145 32.8 30.1 49.2 14.3 15.2 20.7
40-120 20 154 32.8 30.9 49.2 14.3 15.2 22.2
40-121 21 163 32.9 32.9 50.0 17.5 15.2 -
40-122 22 172 34.8 34.8 50.0 17.5 15.2 -
40-123 23 186 35.3 35.3 50.0 17.5 15.2 -
40-124 24 195 35.3 35.3 50.0 19.1 15.9 -
40-125 25 227 37.6 37.6 50.8 19.1 17.0 -
3/4" Drive

40-126 26 254 37.6 37.6 52.3 19.1 17.8 -

40-127 27 286 39.1 39.1 53.2 19.1 17.8 -
40-128 28 314 38.1 40.6 53.8 20.6 19.1 15.9
40-129 29 319 38.1 41.7 53.8 20.6 19.1 15.9
40-130 30 336 38.1 41.7 55.6 27.0 19.1 15.9
40-132 32 317 39.8 46.2 55.1 32.0 27.9 35.1
40-135 35 317 39.9 48.3 56.8 35.0 27.9 35.8
40-136 36 408 39.9 51.4 58.3 36.0 27.9 35.8
Hand Sockets and Drive Tools

40-138 38 408 41.5 53.2 59.9 38.0 30.5 37.3

40-141 41 408 40.7 56.1 63.9 41.0 33.0 39.4
40-142 42 454 41.5 56.1 64.6 42.0 33.0 40.5
40-146 46 544 44.6 63.4 71.0 46.0 35.6 44.8
40-150 50 726 44.6 66.2 75.8 50.0 35.6 48.3
40-154 54 907 49.3 72.5 77.2 54.0 35.6 49.0
40-155 55 907 49.3 72.5 79.8 55.0 38.1 51.4
40-158 58 998 49.3 75.3 82.2 58.0 43.2 52.4
40-160 60 1043 49.3 79.5 82.2 60.0 43.2 50.3
ASME B107.5m

3/4” Drive 12 Point Deep Sockets METRIC

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number mm g End (mm) End (mm) Length Clearance (mm) Depth (mm) Shoulder (mm)
40-319 19 295 33.4 28.4 85.7 18.5 14.3 34.9
40-322 22 322 33.4 33.4 85.7 21.3 25.4 -
40-323 23 326 34.9 34.9 85.7 21.3 25.4 -
40-324 24 340 34.9 34.9 85.7 21.3 25.4 -
40-327 27 413 38.9 38.9 88.9 21.3 25.4 -
40-330 30 522 42.8 42.8 88.9 22.6 20.6 -
40-332 32 535 39.7 44.5 88.9 26.9 28.6 19.1
40-335 35 608 39.7 47.6 88.9 33.0 28.6 19.1
40-336 36 621 39.7 49.2 88.9 33.0 28.6 19.1
40-338 38 748 47.6 50.8 88.9 33.0 28.6 19.1
40-341 41 953 41.3 57.1 88.9 30.2 33.3 -
40-346 46 1524 44.5 62.0 88.9 33.3 36.5 -
40-350 50 2046 44.5 68.2 101.6 36.5 36.5 -
40-355 55 2731 49.3 76.2 108.0 39.7 38.1 -
40-360 60 3670 49.3 82.6 114.3 41.3 44.5 -
ASME B107.5m

4-41 Always wear eye protection when near tools in use.

 4
3/4" Drive

3/4” Drive Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of Teeth
13-972 5.20 19.000 2.500 2.000 24

Hand Sockets and Drive Tools

3/4” Drive Black Oxide Ratchet
Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of Teeth
21-972 5.20 19.000 2.500 2.000 24

3/4” Drive Quick Release Teardrop Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of Teeth
13-972A 5.38 19.690 2.500 2.280 36

3/4” Drive Breaker Bar

Product Weight Overall
Number Lbs. Length (in)
13-918 4.54 22.000
ASME B107.10m Fed'l Spec. GGG-W-641e

3/4" Drive
3/4” Drive Black Oxide Breaker Bar
Product Weight Overall
Number Lbs. Length (in)
21-918 4.69 22.000
ASME B107.10m Fed'l Spec. GGG-W-641e

4-42
 4
3/4" Drive

3/4” Drive Extensions

Product Weight Overall
Number Lbs. Length (in)
13-922 1.10 5.000
13-923 1.77 8.000
13-925 3.41 16.000
ASME B107.10m Fed'l Spec. GGG-W-641e

3/4” Drive T-Handle

3/4" Drive

Product Weight Overall

Number Lbs. Length (in)
13-938 2.58 20.000
ASME B107.10m Fed'l Spec. GGG-W-641e
Hand Sockets and Drive Tools

3/4” Drive Universal Joint

Product Weight Overall
Number Lbs. Length (in)
13-947 1.30 4.156
ASME B107.10m Fed'l Spec. GGG-W-641e

3/4” Drive Adapters

Product Weight Overall
Number Lbs. Description Length (in)
13-951 0.45 3/4"F, 1/2"M 2.093
13-952 0.72 3/4"F, 1"M 2.550
ASME B107.10m Fed'l Spec. GGG-W-641e

CAUTION:
Adapting down to a smaller drive size may result in excessive
torque application, causing failure of fastener, socket or adapter.

3/4" Drive Ratchet Repair Kit

Product Number 13-990
Contains the following parts, with instructions, for repairing 13-972
and 21-972 Ratchets: Gear, Spring, Ball, Reversing Lever, Pawl,
Cover Plate, and 2 Cover Plate Screws.

SAFETY NOTICE
Since ratchets include moving parts, periodic inspection and, if
necessar y, cleaning, lubrication with a light grade oil, and
replacement of worn parts will become necessar y. Parts should
not be replaced individually, but rather in total, and complete
Ratchet Repair Kits are available.

4-43 Always wear eye protection when near tools in use.

 4
1" Drive

1” Drive 12 Point Standard Length Sockets

A B C D E
Product Opening Weight Drive Wrench Overall Wrench Length to
Number Inches Lbs. End (in) End (in) Length (in) Depth (in) Shoulder (in)
14-134 1-1/16 0.60 1.638 1.638 2.265 1.000 0.620
14-136 1-1/8 0.70 1.693 1.693 2.265 1.094 0.656
14-140 1-1/4 0.90 1.823 1.823 2.265 1.219 0.750
14-142 1-5/16 0.90 1.888 1.888 2.325 1.281 0.765
14-144 1-3/8 0.90 1.758 1.945 2.420 1.370 1.094
14-146 1-7/16 1.00 1.758 2.005 2.485 1.440 1.312

Hand Sockets and Drive Tools

14-148 1-1/2 1.10 1.758 2.130 2.545 1.500 1.156
14-152 1-5/8 1.10 1.758 2.255 2.670 1.620 1.312
14-154 1-11/16 1.40 1.945 2.385 2.735 1.680 1.375
14-156 1-3/4 1.60 1.945 2.505 2.795 1.750 1.406
14-158 1-13/16 1.60 1.945 2.570 2.860 1.810 1.438
14-160 1-7/8 1.90 2.258 2.635 2.920 1.880 1.562
14-164 2 2.00 2.258 2.755 2.985 2.000 1.468
14-168 2-1/8 2.30 2.258 2.945 3.045 2.120 1.562
14-170 2-3/16 2.40 2.308 3.005 3.265 2.180 1.688
14-172 2-1/4 2.50 2.258 3.070 3.265 2.250 1.688
14-176 2-3/8 2.90 2.258 3.250 3.310 2.370 1.656
14-180 2-1/2 2.90 2.258 3.375 3.435 2.500 1.750
14-182 2-9/16 2.90 2.258 3.380 3.495 2.560 1.844
14-184 2-5/8 3.30 2.258 3.565 3.560 2.620 1.875
14-188 2-3/4 4.20 2.680 3.715 3.810 2.750 2.062
14-194 2-15/16 4.80 2.680 3.960 3.870 2.930 2.156
14-196 3 4.80 2.680 4.020 4.185 3.000 2.468
14-200 3-1/8 5.40 2.680 4.180 4.185 3.120 2.438
14-212 3-1/2 7.30 2.680 4.545 4.495 3.500 2.625
ASME B107.1 Fed'l Spec. GGG-W-641e

1” Drive Ratchet
Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of Teeth
14-906 10.97 30.000 3.750 1.375 24
ASME B107.10m Fed'l Spec. GGG-W-641e

1” Drive Black Oxide Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of Teeth

1" Drive
22-906 10.65 30.000 3.750 1.375 24
ASME B107.10m Fed'l Spec. GGG-W-641e

1” Drive Breaker Bar

Product Weight Overall
Number Lbs. Length (in)
14-918 8.90 26.250
ASME B107.10m Fed'l Spec. GGG-W-641e

1” Drive Extensions
Product Weight Overall
Number Lbs. Length (in)
14-924 3.40 9.000
14-926 6.80 18.000
ASME B107.10m Fed'l Spec. GGG-W-641e

4-44
 4
1", 1-1/2" Drive

1” Drive Sliding Handle and Adapter

Product Weight Overall
Number Lbs. Length (in)
14-938 5.88 20.000

1” Drive Sliding Handle

Product Weight Overall
1", 1-1/2" Drive

Number Lbs. Length (in)

14-939 4.51 20.000
ASME B107.10m Fed'l Spec. GGG-W-641e

1” Drive Adapter for 14-939 Handle

Product Weight
Number Lbs.
14-940 1.37
Hand Sockets and Drive Tools

ASME B107.10m Fed'l Spec. GGG-W-641e

1” Drive Adapter
Product Weight Description Overall
Number Lbs. Length (in)
14-951 0.89 1"F, 3/4"M 2.625
ASME B107.10m Fed'l Spec. GGG-W-641e

CAUTION:
Adapting down to a smaller drive size may result in excessive torque
application, causing failure of fastener, socket or adapter.

1" Drive Ratchet Repair Kit

Product Number 14-966
Contains the following parts, with instructions, for repairing 14-906 and 22-906
Ratchet: Gear, 2 Springs, Shifting Lever, Shifter, 2 Pawls, Face Plate, 2 Plate
Screws, and 2 Lock Washers. In plastic bag. Approximate weight, 2.05 pounds.

1-1/2” Drive Black Oxide Ratchet

Product Weight Overall Head Head Number
Number Lbs. Length (in) Width (in) Depth (in) of Teeth
23-906 11.03 30.000 3.750 1.375 24
ASME B107.10m Fed'l Spec. GGG-W-641e

SAFETY NOTICE 1-1/2" Drive Ratchet Repair Kit

Since ratchets include moving parts, periodic Product Number 23-966
inspection and, if necessar y, cleaning, Contains the following parts, with instructions, for repairing 23-906 Ratchet:
lubrication with a light grade oil, and Gear, 2 Springs, Shifting Lever, Shifter, 2 Pawls, Face Plate, 2 Plate Screws,
replacement of worn parts will become and 2 Lock Washers. In Plastic Bag. Approximate weight, 2.47 lbs.
necessar y. Parts should not be replaced
individually, but rather in total, and complete
Ratchet Repair Kits are available.

4-45 Always wear eye protection when near tools in use.

 IMPACT AND POWER SOCKETS, ACCESSORIES AND SETS 5
Impact Socket Sets 1/4” to 3/4” Drive
IMPACT SOCKETS Impact Sockets - Standard and Deep
For use with impact drivers. Use with power drivers or hardened fasteners 1/4” to 2-1/2” Drive
may result in excessive, premature wear. Approved eye protection must Impact Accessories 3/8” to 2-1/2” Drive
always be worn when near power equipment in operation.
Impact Hex Bit Sockets 3/4” Drive
STRENGTH Power Sockets 1/4” to 1/2” Drive
Socket wall dimensions are optimized No. 5 Spline Drive Sockets
to provide strength while providing
access to restricted fasteners

SPEED & SAFETY

Pinless design provides strength
and safety that traditional
ball and pin designs cannot offer

SPEED
markings optimize
size identification, and provide
SAE / Metric differentiation

STRENGTH
Manufactured from high alloy steel
and most up-to-date manufacturing
processes for greater strength and durability

POWER SOCKETS
For use with power drivers, not with impact tools
Approved eye protection must always be worn
when near power equipment in operation
SPEED & SAFETY
Pinless design provides strength
and safety that traditional
ball and pin designs cannot offer

STRENGTH
Drive end is made from tool steel for
uncompromising strength and resistance to wear

STRENGTH
Manufactured from high alloy steel
and most up-to-date manufacturing
processes for greater strength and durability
 5
1/4" Drive

Set 18-890
11 Pc. 6 Point 1/4" Drive Impact Socket Set
Includes Socket Bar 16-831 and (10) Socket Clips 16-841.
1/4" Drive

Approximate Weight, 0.57 lbs.

Product Opening, Product Opening,
Number Inches Number Inches
18-606 3/16 18-612 3/8
18-607 7/32 18-614 7/16
18-608 1/4 18-616 1/2
18-609 9/32 18-618 9/16
18-610 5/16 18-620 5/8
Impact and Power Sockets, Accessories and Sets

18-611 11/32

Set 45-890 METRIC

12 Pc. 6 Point 1/4" Drive Impact Socket Set
Includes Socket Bar 16-831 and (10) Socket Clips 16-841.
Approximate Weight, 0.65 Ibs. (295 g)
Product Opening, Product Opening,
Number mm Number mm
45-004 4 45-010 10
45-005 5 45-011 11
45-083 5.5 45-012 12
45-006 6 45-013 13
45-007 7 45-014 14
45-008 8 45-015 15
45-009 9

5-1 Always wear eye protection when near tools in use.

 5
3/8" Drive

Set 19-890
9 Pc. 6 Point 3/8" Drive Impact Socket Set

Impact and Power Sockets, Accessories and Sets

Includes Socket Bar 16-831 and (10) Socket Clips 16-843.
Approximate Weight, 1.00 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
19-608 1/4 19-618 9/16
19-610 5/16 19-620 5/8
19-612 3/8 19-622 11/16
19-614 7/16 19-624 3/4
19-616 1/2

Set 19-895
9 Pc. 6 Point 3/8" Drive Deep Impact Socket Set
Includes Socket Bar 16-831 and (9) Socket Clips 16-843.
Approximate Weight, 1.25 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
19-708 1/4 19-718 9/16
19-710 5/16 19-720 5/8
19-712 3/8 19-722 11/16
19-714 7/16 19-724 3/4
19-716 1/2

Set 19-894
7 Pc. 6 Point 3/8" Drive Armstrong Maxx
Universal Impact Socket Set
Unique Pinless Reversed Ball design for maximum strength and durability.
True 360˚ rotation of socket end for extended range of motion, long life and
smooth operation. Includes Socket Bar 16-831 and (10) Socket Clips
16-843.
Approximate Weight, 1.00 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
19-562 3/8 19-570 5/8
19-564 7/16 19-572 11/16
19-566 1/2 19-574 3/4
19-568 9/16
3/8" Drive

5-2
 5
3/8" Drive

Set 46-891 METRIC

16 Pc. 6 Point 3/8" Drive Impact Socket Set
Includes Socket Bar 16-835 and (20) Socket Clips 16-843.
3/8" Drive

Approximate Weight, 1.60 lbs. (726 g)

Product Opening, Product Opening,
Number mm Number mm
46-607 7 46-615 15
46-608 8 46-616 16
46-609 9 46-617 17
46-610 10 46-618 18
46-611 11 46-619 19
Impact and Power Sockets, Accessories and Sets

46-612 12 46-620 20
46-613 13 46-621 21
46-614 14 46-622 22

Set 46-890 METRIC

11 Pc. 6 Point 3/8" Drive Impact Socket Set
Includes Socket Bar 16-831 and (20) Socket Clips 16-843.
Approximate Weight, 1.25 lbs. (567 g)
Product Opening, Product Opening,
Number mm Number mm
46-607 7 46-613 13
46-608 8 46-614 14
46-609 9 46-615 15
46-610 10 46-616 16
46-611 11 46-617 17
46-612 12

Set 46-898 METRIC

11 Pc. 6 Point 3/8" Drive Deep Impact Socket Set
Includes Socket Bar 16-831 and (20) Socket Clips 16-843.
Approximate Weight, 1.80. lbs. (816 g)
Product Opening, Product Opening,
Number mm Number mm
46-707 7 46-713 13
46-708 8 46-714 14
46-709 9 46-715 15
46-710 10 46-716 16
46-711 11 46-717 17
46-712 12

Set 46-910 METRIC

10 Pc. 6 Point 3/8" Drive Armstrong Maxx
Universal Impact Socket Set
Unique Pinless Reversed Ball design for maximum strength and durability.
True 360˚ rotation of socket end for extended range of motion, long life,
and smooth operation.
Includes Socket Bar 16-831 and (10) Socket Clips 16-843.
Approximate Weight, 2.70 lbs. (1,225 g)
Product Opening, Product Opening,
Number mm Number mm
46-110 10 46-115 15
46-111 11 46-116 16
46-112 12 46-117 17
46-113 13 46-118 18
46-114 14 46-119 19

5-3 Always wear eye protection when near tools in use.

 5
1/2" Drive

Set 20-889
6 Pc. 6 Point 1/2" Drive Impact Socket Set

Impact and Power Sockets, Accessories and Sets

Includes Socket Bar 16-831 and (10) Socket Clips 16-845.
Approximate Weight, 1.54 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
20-016 1/2 20-022 11/16
20-018 9/16 20-024 3/4
20-020 5/8 20-026 13/16

Set 20-897
8 Pc. 6 Point 1/2" Drive Deep Impact Socket Set
Includes Socket Bar 16-831 and (8) Socket Clips 16-845.
Approximate Weight, 5.09 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
20-216 1/2 20-224 3/4
20-218 9/16 20-226 13/16
20-220 5/8 20-228 7/8
20-222 11/16 20-230 15/16

Set 20-899
9 Pc. 6 Point 1/2" Drive Armstrong Maxx
Universal Impact Socket Set
Unique Pinless Reversed Ball design for maximum strength and
durability. True 360˚ rotation of socket end for extended range of
motion, long life and smooth operation.
Includes Socket Bar 16-834 and (10) Socket Clips 16-845.
Approximate Weight, 4.00 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
20-566 1/2 20-576 13/16
20-568 9/16 20-578 7/8
20-570 5/8 20-580 15/16
20-572 11/16 20-582 1
20-574 3/4
1/2" Drive

5-4
 5
1/2" Drive

Set 20-893
11 Pc. 6 Point 1/2" Drive Impact Socket Set
Includes Socket Bar 16-835 and (20) Socket Clips 16-845.
1/2" Drive

Approximate Weight, 5.10 lbs.

Product Opening, Product Opening,
Number Inches Number Inches
20-016 1/2 20-028 7/8
20-018 9/16 20-030 15/16
20-020 5/8 20-032 1
20-022 11/16 20-034 1-1/16
20-024 3/4 20-036 1-1/8
Impact and Power Sockets, Accessories and Sets

20-026 13/16

Set 20-894
11 Pc. 6 Point 1/2" Drive Impact Socket Set
with Plastic Socket Rail
Includes Plastic Socket Rail 16-838 and (15) Socket Clips 16-848.
Approximate Weight, 5.10 lbs.

Product Opening, Product Opening,

Number Inches Number Inches
20-016 1/2 20-028 7/8
20-018 9/16 20-030 15/16
20-020 5/8 20-032 1
20-022 11/16 20-034 1-1/16
20-024 3/4 20-036 1-1/8
20-026 13/16

5-5 Always wear eye protection when near tools in use.

 5
1/2" Drive

Set 20-891A
14 Pc. 6 Point 1/2" Drive Impact Socket Set

Impact and Power Sockets, Accessories and Sets

Includes Socket Bar with Clips.
Approximate Weight, 5.5 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
20-012A 3/8 20-026A 13/16
20-014A 7/16 20-028A 7/8
20-016A 1/2 20-030A 15/16
20-018A 9/16 20-032A 1
20-020A 5/8 20-034A 1-1/16
20-022A 11/16 20-036A 1-1/8
20-024A 3/4 20-040A 1-1/4

Set 20-895A
14 Pc. 6 Point 1/2" Drive Deep Impact Socket Set
Includes Socket Bar with Clips.
Approximate Weight, 9.75 lbs.

Product Opening, Product Opening,

Number Inches Number Inches
20-212A 3/8 20-226A 13/16
20-214A 7/16 20-228A 7/8
20-216A 1/2 20-230A 15/16
20-218A 9/16 20-232A 1
20-220A 5/8 20-234A 1-1/16
20-222A 11/16 20-236A 1-1/8
20-224A 3/4 20-240A 1-1/4

1/2" Drive

5-6
 5
1/2" Drive

Set 47-893 METRIC

14 Pc. 6 Point 1/2" Drive Impact Socket Set
Includes Socket Bar 16-835 and (20) Socket Clips 16-845.
1/2" Drive

Approximate Weight, 3.77 Ibs. (1695 g)

Product Opening, Product Opening,
Number mm Number mm
47-010 10 47-017 17
47-011 11 47-018 18
47-012 12 47-019 19
47-013 13 47-020 20
47-014 14 47-021 21
Impact and Power Sockets, Accessories and Sets

47-015 15 47-022 22
47-016 16 47-024 24

Set 47-897 METRIC

14 Pc. 6 Point 1/2" Drive Deep Impact Socket Set
Includes Socket Bar 16-835 and (20) Socket Clips 16-845.
Approximate Weight, 7.89 Ibs. (3,550 g)

Product Opening, Product Opening,

Number mm Number mm
47-210 10 47-217 17
47-211 11 47-218 18
47-212 12 47-219 19
47-213 13 47-220 20
47-214 14 47-221 21
47-215 15 47-222 22
47-216 16 47-224 24

Set 47-913 METRIC

13 Pc. 6 Point 1/2" Drive Armstrong Maxx
Universal Impact Socket Set
Unique Pinless Reversed Ball design for maximum strength and
durability. True 360˚ rotation of socket end for extended range of
motion, long life and smooth operation.
Includes Socket Bar 16-834 and (20) Socket Clips 16-845.
Approximate Weight, 6.10 Ibs. (2,767 g)
Product Opening, Product Opening,
Number mm Number mm
47-110 10 47-117 17
47-111 11 47-118 18
47-112 12 47-119 19
47-113 13 47-121 21
47-114 14 47-122 22
47-115 15 47-124 24
47-116 16

5-7 Always wear eye protection when near tools in use.

 5
3/4" Drive

Set 21-893
14 Pc. 6 Point 3/4" Drive Impact Socket Set

Impact and Power Sockets, Accessories and Sets

Includes (2) Socket Bars 16-835 and (20) Socket Clips 16-847.
Approximate Weight, 16.25 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
21-024 3/4 21-038 1-3/16
21-026 13/16 21-040 1-1/4
21-028 7/8 21-042 1-5/16
21-030 15/16 21-044 1-3/8
21-032 1 21-046 1-7/16
21-034 1-1/16 21-048 1-1/2
21-036 1-1/8 21-052 1-5/8

Set 21-899
5 Pc. 3/4" Drive Hex Bit Impact Socket Set
Includes Socket Bar 16-831 and (10) Socket Clips 16-847.
Approximate Weight, 4.66 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
21-718 9/16 21-723 7/8
21-719 5/8 21-725 1
21-721 3/4

Set 48-893 METRIC

12 Pc. 6 Point 3/4" Drive Impact Socket Set
Includes 2 Socket Bars 16-834 and (20) Socket Clips 16-847.
Approximate Weight, 13.6 lbs. (6.1 kg)
Product Opening, Product Opening,
Number mm Number mm
48-019 19 48-027 27
48-020 20 48-030 30
48-021 21 48-032 32
48-022 22 48-036 36
48-023 23 48-041 41
48-024 24 48-046 46 3/4" Drive

5-8
 5
1/4" Drive

6 Point 1/4" Drive Thin Wall Power Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
1/4" Drive

18-006 3/16 0.02 0.450 0.310 0.820 0.126 0.170 0.380

18-007 7/32 0.02 0.450 0.345 0.820 0.126 0.170 0.380
18-008 1/4 0.02 0.450 0.390 0.820 0.141 0.180 0.380
18-009 9/32 0.03 0.450 0.425 0.820 0.172 0.190 0.380
18-010 5/16 0.02 0.465 0.465 0.820 0.172 0.260 -
18-011 11/32 0.02 0.500 0.500 0.820 0.203 0.280 -
18-012 3/8 0.03 0.555 0.555 0.820 - 0.500 -
18-014 7/16 0.04 0.615 0.615 0.820 - 0.500 -
Impact and Power Sockets, Accessories and Sets

18-016 1/2 0.06 0.680 0.680 0.820 - 0.500 -

Suitable for hand use, or limited-clearance power applications only. ASME B107.3 Fed'I Spec. GGG-W-660a

6 Point 1/4" Drive Power Sockets For Self-Tapping Screws

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
18-036 3/16 0.02 0.500 0.320 0.880 - 0.160 0.370
18-038 1/4 0.03 0.500 0.380 0.880 - 0.160 0.370
18-039 9/32 0.03 0.500 0.430 1.000 - 0.190 0.370
18-040 5/16 0.03 0.500 0.500 1.000 - 0.190 -
18-042 3/8 0.07 0.630 0.630 1.000 - 0.280 -
18-044 7/16 0.07 0.630 0.630 1.000 - 0.280 -
18-046 1/2 0.08 0.680 0.680 1.000 - 0.340 -
ASME B107.3 Fed'I Spec. GGG-W-660a

6 Point 1/4" Drive Magnetic Power Sockets For Self-Tapping Screws

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
18-076 3/16 0.03 0.500 0.320 0.880 - 0.160 0.370
18-078 1/4 0.03 0.500 0.380 0.880 - 0.160 0.370
18-079 9/32 0.03 0.500 0.430 1.000 - 0.190 0.370
18-080 5/16 0.03 0.500 0.500 1.000 - 0.190 -
18-081 11/32 0.05 0.500 0.500 1.000 - 0.190 -
18-082 3/8 0.06 0.630 0.630 1.000 - 0.250 -
18-084 7/16 0.07 0.630 0.630 1.000 - 0.280 -
18-086 1/2 0.09 0.680 0.680 1.000 - 0.340 -

6 Point 1/4" Drive Deep Thin Wall Power Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
18-206 3/16 0.04 0.450 0.310 1.940 0.126 0.230 0.870
18-208 1/4 0.04 0.450 0.388 1.940 0.172 0.219 0.870
18-209 9/32 0.05 0.450 0.425 1.940 0.172 0.230 0.870
18-210 5/16 0.05 0.450 0.450 1.940 0.200 0.680 -
18-211 11/32 0.06 0.500 0.500 1.940 0.250 0.680 -
18-212 3/8 0.08 0.550 0.550 1.940 0.344 0.950 -
18-214 7/16 0.10 0.615 0.615 1.940 0.297 0.950 -
18-216 1/2 0.12 0.680 0.680 1.940 0.344 0.950 -
Suitable for hand use, or limited-clearance power applications only. ASME B107.3 Fed'I Spec. GGG-W-660a

5-9 Always wear eye protection when near tools in use.

 5
1/4" Drive

6 Point 1/4" Drive Impact Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to

Impact and Power Sockets, Accessories and Sets

Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
18-606 3/16 0.03 0.500 0.302 0.845 0.130 0.300 0.295
18-607 7/32 0.03 0.500 0.338 0.845 0.190 0.300 0.295
18-608 1/4 0.03 0.500 0.374 0.845 0.190 0.345 0.265
18-609 9/32 0.03 0.490 0.490 0.875 0.240 0.375 -
18-610 5/16 0.03 0.500 0.500 0.875 0.240 0.375 -
18-611 11/32 0.03 0.530 0.530 0.875 0.240 0.375 -
18-612 3/8 0.04 0.575 0.575 0.875 0.376 0.500 -
18-614 7/16 0.05 0.655 0.655 0.875 0.438 0.500 -
18-616 1/2 0.06 0.725 0.725 0.875 0.501 0.500 -
18-618 9/16 0.07 0.780 0.780 0.875 0.564 0.500 -
18-620 5/8 0.09 0.860 0.860 1.000 0.626 0.625 -

1/4" Drive Power Extensions

Product Weight Overall
Number lbs. Length
18-921 0.06 2.000
18-923 0.14 6.000

1/4" Drive Locking Impact Extensions

Product Weight Overall
Number lbs. Length
18-935 0.10 3.000
18-936 0.20 6.000
18-937 0.40 12.000
18-938 0.50 18.000
18-939 0.60 24.000

5 Pc. 1/4" Drive Impact Extension Set

18-940 2.10

6 Point 1/4" Drive Impact Sockets METRIC

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number mm g End (mm) End (mm) Length (mm) Clearance (mm) Depth (mm) Shoulder (mm)
45-004 4 14 12.7 6.7 21.5 3.2 7.6 7.5
45-005 5 14 12.7 7.9 21.5 4.8 7.6 7.5
45-083 5.5 14 12.7 8.5 21.5 4.8 7.6 7.5
45-006 6 14 12.7 9.1 21.5 4.8 8.8 6.7
45-007 7 14 12.7 10.2 21.5 6.1 9.5 7.3
1/4" Drive

45-008 8 16 13.5 13.5 22.2 6.1 9.5 -

45-009 9 16 13.8 13.8 22.2 6.1 9.5 -
45-010 10 21 15.6 15.6 22.2 10.0 12.7 -
45-011 11 23 16.6 16.6 22.2 11.0 12.7 -
45-012 12 24 17.3 17.3 22.2 12.0 12.7 -
45-013 13 30 19.0 19.0 22.2 13.0 12.7 -
45-014 14 32 19.8 19.8 22.2 14.0 12.7 -
45-015 15 43 21.6 21.6 25.4 15.0 15.9 -

5-10
 5
3/8" Drive

6 Point 3/8" Drive Impact Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
3/8" Drive

19-608 1/4 0.10 0.693 0.406 1.102 0.236 0.157 0.453

19-610 5/16 0.10 0.693 0.472 1.102 0.276 0.157 0.453
19-611 11/32 0.10 0.693 0.508 1.102 0.327 0.197 0.453
19-612 3/8 0.10 0.693 0.583 1.102 0.327 0.197 0.453
19-614 7/16 0.10 0.693 0.693 1.102 0.335 0.236 -
19-616 1/2 0.10 0.783 0.783 1.102 0.394 0.276 -
19-618 9/16 0.20 0.858 0.858 1.102 0.433 0.315 -
19-620 5/8 0.20 0.933 0.933 1.102 0.488 0.354 -
Impact and Power Sockets, Accessories and Sets

19-622 11/16 0.20 1.008 1.008 1.102 0.488 0.354 -

19-624 3/4 0.22 1.047 1.047 1.102 0.591 0.394 -
19-626 13/16 0.26 1.250 1.250 1.140 0.609 0.625 -
19-628 7/8 0.29 1.312 1.312 1.180 0.672 0.625 -
19-630 15/16 0.32 1.375 1.375 1.180 0.672 0.625 -
19-632 1 0.35 1.438 1.438 1.250 0.672 0.625 -
ASME B107.2 Fed'I Spec. GGG-W-660a

6 Point 3/8" Drive Magnetic Power Sockets For Self-Tapping Screws

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
19-080 5/16 0.06 0.750 0.500 1.250 - 0.190 0.500
19-082 3/8 0.06 0.750 0.590 1.250 - 0.190 0.500
19-084 7/16 0.07 0.750 0.690 1.500 - 0.280 0.630
19-086 1/2 0.08 0.810 0.810 1.500 - 0.340 -
19-088 9/16 0.10 0.880 0.880 1.500 - 0.430 -

6 Point 3/8" Drive Deep Impact Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
19-708 1/4 0.20 0.693 0.406 2.480 0.354 0.276 0.453
19-709 9/32 0.20 0.693 0.460 2.480 0.281 0.295 0.453
19-710 5/16 0.20 0.693 0.472 2.480 0.354 0.315 0.453
19-711 11/32 0.20 0.693 0.544 2.480 0.313 0.350 0.453
19-712 3/8 0.20 0.693 0.583 2.480 0.354 0.394 0.453
19-714 7/16 0.20 0.693 0.697 2.480 0.402 0.433 -
19-716 1/2 0.21 0.783 0.783 2.480 0.433 0.512 -
19-718 9/16 0.30 0.874 0.874 2.795 0.555 0.472 -
19-720 5/8 0.34 0.933 0.933 2.795 0.591 0.512 -
19-722 11/16 0.38 1.008 1.008 2.795 0.665 0.551 -
19-724 3/4 0.40 1.043 1.043 2.795 0.717 0.591 -
19-726 13/16 0.58 1.250 1.250 2.795 0.752 0.777 -
19-728 7/8 0.68 1.312 1.312 2.795 0.752 0.856 -
19-730 15/16 0.82 1.375 1.375 2.795 0.672 0.625 -
19-732 1 0.90 1.438 1.438 2.795 0.672 0.688 -
ASME B107.2 Fed'I Spec. GGG-W-660a

5-11 Always wear eye protection when near tools in use.

 5
3/8" Drive

8 Point 3/8" Drive Impact Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to

Impact and Power Sockets, Accessories and Sets

Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
19-408 1/4 0.07 0.685 0.480 1.000 0.240 0.200 0.470
19-414 7/16 0.10 0.812 0.812 1.000 0.453 0.340 -
19-416 1/2 0.13 0.937 0.937 1.000 0.531 0.340 -
19-418 9/16 0.17 1.030 1.030 1.060 0.594 0.400 -

12 Point 3/8" Drive Impact Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
19-810 5/16 0.07 0.693 0.472 1.102 0.276 0.157 0.448
19-812 3/8 0.07 0.693 0.583 1.102 0.327 0.197 0.448
19-814 7/16 0.08 0.693 0.693 1.102 0.335 0.236 -
19-816 1/2 0.10 0.783 0.783 1.102 0.394 0.276 -
19-818 9/16 0.12 0.858 0.858 1.102 0.433 0.315 -
19-820 5/8 0.14 0.933 0.933 1.102 0.488 0.354 -
19-822 11/16 0.17 1.008 1.008 1.102 0.488 0.354 -
19-824 3/4 0.17 1.047 1.047 1.102 0.591 0.394 -
19-826 13/16 0.25 1.250 1.250 1.140 0.609 0.625 -
19-828 7/8 0.29 1.312 1.312 1.180 0.672 0.625 -
19-830 15/16 0.31 1.375 1.375 1.180 0.672 0.625 -
19-832 1 0.36 1.438 1.438 1.250 0.672 0.625 -

6 Point 3/8" Drive Armstrong Maxx Universal Impact Sockets

Unique Pinless Reversed Ball design for maximum strength and durability. True 360˚ rotation of socket
end for extended range of motion, long life and smooth operation. Maximum operating angle is 30˚.
A B C D E
Product Opening Weight Drive Wrench Overall Bolt Wrench
Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in)
19-562 3/8 0.22 0.969 0.562 2.188 0.500 0.500
19-564 7/16 0.22 0.969 0.672 2.188 0.500 0.500
19-566 1/2 0.23 0.969 0.750 2.188 0.500 0.500
19-568 9/16 0.25 0.969 0.828 2.188 0.500 0.500
19-570 5/8 0.25 0.969 0.906 2.188 0.500 0.500
3/8" Drive

19-572 11/16 0.27 0.969 1.000 2.188 0.500 0.500

19-574 3/4 0.28 0.969 1.062 2.188 0.500 0.500
ASME B107.2 Fed'I Spec. GGG-W-660a

5-12
 5
3/8" Drive

3/8" Drive Impact Extensions

Product Weight Overall
Number lbs. Length (in)
19-922 0.18 3.000
3/8" Drive

19-923 0.31 6.000

ASME B107.2 Fed'I Spec. GGG-W-660a 6

3/8" Drive Locking Impact Extensions

Impact and Power Sockets, Accessories and Sets

Product Weight Overall

Number lbs. Length (in)
19-935 0.25 3.000
19-936 0.40 6.000
19-937 0.75 12.000

3 Pc. 3/8" Drive Impact Extension Set

19-940 1.45

3/8" Drive Impact Armstrong Maxx Universal Joint

Unique Pinless Reversed Ball design for maximum strength and durability.
True 360˚ rotation of socket end for extended range of motion, long life, and
smooth operation. Maximum operating angle is 30˚.
Product Weight Overall
Number lbs. Length (in)
19-947 0.20 1.938
ASME B107.2 Fed'I Spec. GGG-W-660a

3/8" Drive Impact Drive Adapter

Product Weight Overall
Number lbs. Description Length (in)
19-952 0.14 3/8" F, 1/2" M 1.375
ASME B107.2 Fed'I Spec. GGG-W-660a

3/8" Drive Impact Drive Adapter

Product Weight Overall
Number lbs. Description Length (in)
19-952A 0.09 3/8" F, 1/2" M 0.625
ASME B107.2 Fed'I Spec. GGG-W-660a

5-13 Always wear eye protection when near tools in use.

 5
3/8" Drive

6 Point 3/8" Drive Impact Sockets METRIC

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to

Impact and Power Sockets, Accessories and Sets

Number Inches g End (mm) End (mm) Length (mm) Clearance (mm) Depth (mm) Shoulder (mm)
46-606 6 40 17.6 10.4 28.0 5.6 5.0 11.5
46-607 7 45 17.6 12.0 28.0 6.5 5.0 11.5
46-608 8 45 17.6 13.1 28.0 6.5 5.0 11.5
46-609 9 45 17.6 14.5 28.0 8.5 5.0 11.5
46-610 10 45 17.6 16.1 28.0 8.5 5.0 11.5
46-611 11 45 17.6 17.6 28.0 8.5 6.0 -
46-612 12 45 18.7 18.7 28.0 9.5 8.0 -
46-613 13 45 19.9 19.9 28.0 9.5 9.0 -
46-614 14 90 21.8 21.8 28.0 11.0 9.0 -
46-615 15 90 22.3 22.3 28.0 11.0 11.0 -
46-616 16 90 23.7 23.7 28.0 11.0 11.0 -
46-617 17 90 24.3 24.3 28.0 12.4 11.0 -
46-618 18 90 25.6 25.6 28.0 12.4 11.0 -
46-619 19 90 26.6 26.6 30.0 15.0 13.0 -
46-620 20 116 28.6 28.6 31.0 14.3 13.5 -
46-621 21 120 30.2 30.2 31.0 15.1 13.5 -
46-622 22 126 31.7 31.7 31.0 16.7 13.5 -
46-623 23 127 31.7 31.7 31.0 17.5 15.1 -
46-624 24 132 33.3 33.3 31.0 18.3 15.1 -

6 Point 3/8" Drive Deep Impact Sockets METRIC

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number mm g End (mm) End (mm) Length (mm) Clearance (mm) Depth (mm) Shoulder (mm)
46-706 6 90 17.6 10.4 63.0 3.9 9.1 13.0
46-707 7 90 17.6 12.3 63.0 4.8 9.1 13.0
46-708 8 90 17.6 13.1 63.0 6.5 9.1 13.0
46-709 9 90 17.6 14.5 63.0 8.5 10.0 13.0
46-710 10 90 17.6 16.1 63.0 8.5 12.5 13.0
46-711 11 90 17.6 17.6 63.0 8.5 12.5 -
46-712 12 90 18.7 18.7 63.0 9.5 12.5 -
46-713 13 90 19.9 19.9 63.0 9.5 13.5 -
46-714 14 90 21.8 21.8 63.0 11.0 13.5 -
46-715 15 136 22.3 22.3 71.0 14.8 12.0 -
46-716 16 136 23.7 23.7 71.0 15.0 12.0 -
46-717 17 136 24.3 24.3 71.0 16.9 13.0 -
46-718 18 136 25.6 25.6 71.0 16.9 13.0 -
46-719 19 136 26.6 26.6 71.0 18.2 15.0 -
46-720 20 241 28.6 28.6 71.0 14.3 19.8 -
46-721 21 270 30.2 30.2 71.0 15.1 19.8 -
46-722 22 290 31.8 31.8 71.0 16.7 20.6 -
46-723 23 282 31.8 31.8 71.0 17.5 20.6 -
46-724 24 311 33.5 33.5 71.0 18.3 23.8 -
3/8" Drive

5-14
 5
3/8" Drive

12 Point 3/8" Drive Impact Sockets METRIC

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number mm g End (mm) End (mm) Length (mm) Clearance (mm) Depth (mm) Shoulder (mm)
3/8" Drive

46-308 8 33 17.6 13.1 28.0 6.5 5.0 11.0

46-309 9 33 17.6 14.5 28.0 8.5 5.0 11.0
46-310 10 34 17.6 16.1 28.0 8.5 5.0 11.0
46-311 11 34 17.6 17.6 28.0 8.5 6.0 -
46-312 12 37 18.7 18.7 28.0 9.5 8.0 -
46-313 13 43 19.9 19.9 28.0 9.5 9.0 -
46-314 14 54 21.8 21.8 28.0 11.0 9.0 -
46-315 15 53 22.3 22.3 28.0 11.0 11.0 -
46-316 16 61 23.7 23.7 28.0 11.0 11.0 -
Impact and Power Sockets, Accessories and Sets

46-317 17 63 24.3 24.3 28.0 12.4 11.0 -

46-318 18 71 25.6 25.6 28.0 12.4 11.0 -
46-319 19 78 26.6 26.6 30.0 15.0 13.0 -
46-320 20 86 27.8 27.8 30.0 15.0 13.0 -
46-321 21 105 30.1 30.1 30.0 15.0 13.0 -
46-322 22 119 32.0 32.0 30.0 17.0 13.0 -

6 Point 3/8" Drive Armstrong Maxx Universal Impact Sockets METRIC

Unique Pinless Reversed Ball design for maximum strength and durability. True 360˚ rotation of socket
end for extended range of motion, long life and smooth operation. Maximum operating angle is 30˚.
A B C D E
Product Opening Weight Drive Wrench Overall Bolt Wrench
Number mm g End (mm) End (mm) Length (mm) Clearance (mm) Depth (mm)
46-110 10 98 24.6 15.5 55.6 12.7 12.7
46-111 11 100 24.6 17.1 55.6 12.7 12.7
46-112 12 102 24.6 18.6 55.6 12.7 12.7
46-113 13 104 24.6 19.1 55.6 12.7 12.7
46-114 14 111 24.6 21.0 55.6 12.7 12.7
46-115 15 111 24.6 22.2 55.6 12.7 12.7
46-116 16 111 24.6 23.0 55.6 12.7 12.7
46-117 17 118 24.6 24.6 55.6 12.7 12.7
46-118 18 120 24.6 25.0 55.6 12.7 12.7
46-119 19 123 24.6 27.0 55.6 12.7 12.7

5-15 Always wear eye protection when near tools in use.

 5
1/2" Drive

6 Point 1/2" Drive Magnetic Power Sockets For Self-Tapping Screws

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to

Impact and Power Sockets, Accessories and Sets

Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
20-082 3/8 0.15 0.930 0.650 1.500 - 0.250 0.630
20-084 7/16 0.16 0.930 0.680 1.500 - 0.280 0.630
20-086 1/2 0.18 0.930 0.820 1.500 - 0.340 0.630
20-088 9/16 0.20 0.930 0.880 1.500 - 0.430 0.630

6 Point 1/2" Drive Impact Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
20-012 3/8 0.20 0.874 0.661 1.496 0.354 0.197 0.472
20-014 7/16 0.20 0.874 0.705 1.496 0.354 0.236 0.472
20-016 1/2 0.20 0.957 0.787 1.496 0.472 0.276 0.472
20-018 9/16 0.20 0.957 0.957 1.496 0.531 0.315 -
20-020 5/8 0.20 0.957 0.957 1.496 0.531 0.354 -
20-022 11/16 0.30 1.051 1.051 1.496 0.531 0.354 -
20-024 3/4 0.30 1.185 1.185 1.614 0.531 0.394 -
20-026 13/16 0.40 1.260 1.260 1.614 0.610 0.433 -
20-028 7/8 0.40 1.260 1.260 1.752 0.610 0.492 -
20-030 15/16 0.40 1.299 1.299 1.752 0.669 0.512 -
20-032 1 0.50 1.405 1.405 1.752 0.813 0.600 -
20-034 1-1/16 0.50 1.490 1.490 1.752 0.813 0.600 -
20-036 1-1/8 0.70 1.532 1.532 2.000 0.781 0.820 -
20-038 1-3/16 0.70 1.640 1.640 2.032 0.781 0.820 -
20-040 1-1/4 0.80 1.760 1.760 2.032 0.812 0.820 -
20-042 1-5/16 0.90 1.875 1.875 2.032 0.906 0.852 -
20-044 1-3/8 1.00 1.938 1.938 2.125 0.937 0.915 -
20-046 1-7/16 1.10 2.000 2.000 2.187 1.000 0.938 -
20-048 1-1/2 1.30 2.125 2.125 2.187 1.078 0.875 -
ASME B107.2 Fed'I Spec. GGG-W-660a

6 Point 1/2" Drive Deep Impact Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
20-212 3/8 0.40 0.874 0.661 3.228 0.374 0.551 0.492
20-214 7/16 0.40 0.874 0.705 3.228 0.425 0.551 0.492
20-216 1/2 0.40 0.966 0.785 3.266 0.492 0.500 0.625
20-218 9/16 0.40 0.966 0.875 3.266 0.543 0.500 0.625
20-220 5/8 0.40 0.963 0.963 3.266 0.614 0.512 -
20-222 11/16 0.40 1.040 1.049 3.266 0.650 0.551 -
20-224 3/4 0.50 1.187 1.187 3.266 0.709 0.610 -
20-226 13/16 0.60 1.262 1.262 3.266 0.748 0.610 -
20-228 7/8 0.80 1.262 1.262 3.266 0.748 0.669 -
20-230 15/16 0.80 1.313 1.313 3.266 0.787 0.728 -
1/2" Drive

20-232 1 0.80 1.405 1.405 3.250 0.812 1.600 -

20-234 1-1/16 0.90 1.490 1.490 3.250 0.812 1.600 -
20-236 1-1/8 1.20 1.540 1.540 3.500 0.990 1.490 -
20-238 1-3/16 1.30 1.640 1.640 3.500 1.062 1.350 -
20-240 1-1/4 1.40 1.750 1.750 3.500 1.130 1.160 -
20-242 1-5/16 1.50 1.875 1.875 3.500 1.280 1.320 -
20-244 1-3/8 1.60 1.938 1.938 3.500 1.300 1.375 -
20-246 1-7/16 1.80 2.000 2.000 3.500 1.300 1.375 -
20-248 1-1/2 2.10 2.125 2.125 3.500 1.188 1.125 -
ASME B107.2 Fed'l Spec. GGG-W-660a

5-16
 5
1/2" Drive

8 Point 1/2" Drive Impact Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
1/2" Drive

20-412 3/8 0.17 0.938 0.719 1.500 0.297 0.281 0.656

20-414 7/16 0.18 0.938 0.828 1.500 0.297 0.313 0.656
20-416 1/2 0.21 1.000 0.940 1.500 0.359 0.344 0.625
20-418 9/16 0.28 1.125 1.016 1.500 0.422 0.375 0.625
20-420 5/8 0.29 1.125 1.125 1.500 0.484 0.406 -
20-422 11/16 0.36 1.250 1.250 1.500 0.484 0.438 -
20-424 3/4 0.38 1.312 1.312 1.562 0.547 0.470 -
20-426 13/16 0.42 1.375 1.375 1.625 0.609 0.500 -
Impact and Power Sockets, Accessories and Sets

20-428 7/8 0.47 1.532 1.532 1.750 0.609 0.563 -

20-430 15/16 0.69 1.625 1.625 1.875 0.672 0.625 -
20-432 1 0.79 1.750 1.750 1.875 0.672 0.656 -
20-434 1-1/16 1.13 1.875 1.875 2.000 0.750 0.688 -
20-436 1-1/8 1.14 2.000 2.000 2.000 0.750 0.750 -
ASME B107.2 Fed'I Spec. GGG-W-660a

8 Point 1/2" Drive Deep Impact Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
20-712 3/8 0.40 0.875 0.719 3.266 0.313 0.438 0.625
20-714 7/16 0.48 0.938 0.844 3.266 0.313 0.438 0.625
20-716 1/2 0.50 0.960 0.960 3.266 0.375 0.438 -
20-718 9/16 0.58 1.030 1.030 3.266 0.437 0.438 -
20-720 5/8 0.68 1.125 1.125 3.266 0.500 0.500 -
20-722 11/16 0.77 1.187 1.187 3.266 0.500 0.531 -
20-724 3/4 0.94 1.312 1.312 3.266 0.563 0.563 -
20-726 13/16 0.96 1.375 1.375 3.266 0.625 1.000 -
20-728 7/8 1.14 1.500 1.500 3.266 0.625 1.250 -
20-730 15/16 1.46 1.625 1.625 3.500 0.688 1.250 -
20-732 1 1.56 1.687 1.687 3.500 0.688 1.250 -

12 Point 1/2" Drive Impact Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
20-812 3/8 0.16 0.874 0.661 1.496 0.354 0.197 0.479
20-814 7/16 0.16 0.874 0.705 1.496 0.354 0.236 0.479
20-816 1/2 0.20 0.957 0.787 1.496 0.472 0.276 0.482
20-818 9/16 0.20 0.957 0.957 1.496 0.531 0.315 -
20-820 5/8 0.19 0.957 0.957 1.496 0.531 0.354 -
20-822 11/16 0.24 1.051 1.051 1.496 0.531 0.354 -
20-824 3/4 0.33 1.185 1.185 1.496 0.531 0.394 -
20-826 13/16 0.40 1.260 1.260 1.614 0.610 0.433 -
20-828 7/8 0.38 1.260 1.260 1.614 0.610 0.492 -
20-830 15/16 0.45 1.311 1.311 1.752 0.669 0.512 -
20-832 1 0.52 1.405 1.405 1.752 0.669 0.531 -
20-834 1-1/16 0.57 1.490 1.490 1.752 0.689 0.630 -
20-836 1-1/8 0.65 1.550 1.550 2.000 0.797 0.813 -
20-838 1-3/16 0.73 1.640 1.640 2.000 0.797 0.875 -
20-840 1-1/4 0.86 1.750 1.750 2.000 0.828 0.875 -
20-842 1-5/16 0.99 1.875 1.875 2.000 0.953 0.875 -
20-844 1-3/8 1.06 1.938 1.938 2.000 0.953 0.875 -
20-846 1-7/16 1.21 2.000 2.000 2.150 1.016 0.875 -
20-848 1-1/2 1.42 2.125 2.125 2.187 1.078 0.875 -
ASME B107.2 Fed'I Spec. GGG-W-660a

5-17 Always wear eye protection when near tools in use.

 5
1/2" Drive

12 Point 1/2" Drive Deep Impact Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to

Impact and Power Sockets, Accessories and Sets

Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
20-612 3/8 0.38 0.874 0.661 3.228 0.374 0.551 0.479
20-614 7/16 0.37 0.874 0.705 3.228 0.425 0.551 0.479
20-616 1/2 0.45 0.957 0.787 3.228 0.492 0.866 0.479
20-618 9/16 0.43 0.957 0.957 3.228 0.531 0.984 -
20-620 5/8 0.40 0.957 0.957 3.228 0.531 1.063 -
20-622 11/16 0.49 1.053 1.053 3.266 0.650 0.578 -
20-624 3/4 0.66 1.191 1.191 3.266 0.709 0.625 -
20-626 13/16 0.75 1.266 1.266 3.266 0.748 0.625 -
20-628 7/8 0.73 1.266 1.266 3.266 0.748 0.686 -
20-630 15/16 0.77 1.317 1.317 3.266 0.787 0.750 -
20-632 1 0.80 1.410 1.410 3.25 0.813 1.625 -
20-634 1-1/16 0.90 1.490 1.490 3.25 0.813 1.625 -
20-636 1-1/8 0.95 1.550 1.550 3.50 1.063 1.500 -
20-638 1-3/16 1.09 1.625 1.625 3.50 1.063 1.438 -
20-640 1-1/4 1.36 1.750 1.750 3.50 1.125 1.125 -
20-642 1-5/16 1.58 1.875 1.875 3.50 1.188 1.250 -
20-644 1-3/8 1.71 1.938 1.938 3.50 1.188 1.250 -
20-646 1-7/16 1.84 2.000 2.000 3.50 1.188 1.250 -
20-648 1-1/2 2.22 2.125 2.125 3.50 1.188 1.125 -

6 Point 1/2" Drive Armstrong Maxx Universal Impact Sockets

Unique Pinless Reversed Ball design for maximum strength and durability. True 360˚ rotation of socket
end for extended range of motion, long life and smooth operation. Maximum operating angle is 30˚.
A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
20-564 7/16 0.270 0.969 0.700 2.812 0.984 0.984 -
20-566 1/2 0.285 0.969 0.750 2.812 0.984 0.984 -
20-568 9/16 0.295 0.969 0.828 2.812 0.984 0.984 -
20-570 5/8 0.310 0.969 0.906 2.812 0.984 0.984 -
20-572 11/16 0.525 1.219 1.000 3.062 0.984 0.984 -
20-574 3/4 0.540 1.219 1.062 3.125 1.031 1.031 -
20-576 13/16 0.565 1.219 1.141 3.172 1.031 1.031 -
20-578 7/8 0.585 1.219 1.234 3.172 1.031 1.031 -
20-580 15/16 0.615 1.219 1.297 3.219 1.031 1.031 -
20-582 1 0.640 1.219 1.344 3.266 1.031 1.031 -

1/2" Drive

5-18
 5
1/2" Drive

1/2" Drive Impact Extensions

Product Weight Overall
Number lbs. Length (in)
20-923 0.49 5.000
1/2" Drive

20-924 0.89 10.000

20-922A 0.30 3.000
20-923A 0.59 6.000
ASME B107.2 Fed'I Spec. GGG-W-660

1/2" Drive Locking Impact Extensions

Impact and Power Sockets, Accessories and Sets

Product Weight Overall (in)

Number lbs. Length
20-935 0.35 3.000
20-936 0.60 5.000
20-937 1.05 10.000

3 Pc. 1/2" Drive Locking Impact Extension Set

20-940 2.05

1/2" Drive Armstrong Maxx Impact Universal Joint

Unique Pinless Reversed Ball design for maximum strength and durability.
True 360˚ rotation of socket end for extended range of motion, long life
and smooth operation. Maximum operating angle is 30˚.
Product Weight Overall
Number lbs. Length (in)
20-947 0.44 2.594

ASME B107.2 Fed'I Spec. GGG-W-660a

1/2" Drive Impact Drive Adapters

Product Weight Overall
Number lbs. Description Length (in)
20-951 0.13 1/2" F, 3/8" M 1.500
20-952* 0.25 1/2" F, 3/4" M 1.813
20-953 0.23 1/2" F, 5/8" M 1.688
20-996 0.39 5/8" F, 1/2" M 1.875
*Male square has pin thru hole. ASME B107.2 Fed'I Spec. GGG-W-660a

1/2" Drive Power Hex Square Shank

Product Weight
Number lbs. Description
20-959 0.17 1/2 Sq., 7/16" Hex, 2-3/4" Lg.

5-19 Always wear eye protection when near tools in use.

 5
1/2" Drive

6 Point 1/2" Drive Impact Sockets METRIC

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to

Impact and Power Sockets, Accessories and Sets

Number mm g End (mm) End (mm) Length (mm) Clearance (mm) Depth (mm) Shoulder (mm)
47-008 8 90 22.2 13.0 38.0 5.2 9.5 12.5
47-009 9 90 22.2 15.6 38.0 5.6 11.1 12.5
47-010 10 90 22.2 15.6 38.0 9.0 5.5 12.5
47-011 11 90 22.2 16.7 38.0 9.0 6.5 12.5
47-012 12 90 22.2 18.8 38.0 9.0 7.5 12.5
47-013 13 90 24.3 20.1 38.0 13.5 7.5 12.5
47-014 14 90 24.3 20.8 38.0 13.5 9.5 12.5
47-015 15 90 24.3 24.3 38.0 13.5 9.5 -
47-016 16 136 24.3 24.3 38.0 13.5 10.5 -
47-017 17 136 26.7 26.7 38.0 13.5 10.5 -
47-018 18 136 27.8 27.8 38.0 13.5 11.0 -
47-019 19 136 30.1 30.1 38.0 14.4 12.0 -
47-020 20 136 30.1 30.3 41.0 15.0 12.5 -
47-021 21 136 31.8 31.8 41.0 15.0 12.5 -
47-022 22 136 32.0 32.0 41.0 15.0 13.5 -
47-023 23 181 33.3 33.3 44.5 16.0 13.5 -
47-024 24 181 36.5 36.5 45.2 19.1 17.5 -
47-025 25 181 36.5 36.5 45.2 19.1 17.5 -
47-026 26 227 38.1 38.1 50.8 19.1 19.5 -
47-027 27 227 37.9 37.9 44.5 20.7 15.2 -
47-028 28 232 38.9 38.9 50.8 20.6 22.0 -
47-029 29 253 41.3 41.3 50.8 21.4 22.0 -
47-030 30 272 41.3 41.3 52.4 22.6 22.0 -
47-032 32 272 44.5 44.5 52.4 24.0 22.0 -
47-033 33 282 46.0 46.0 52.4 25.0 22.9 -
47-034 34 286 47.6 47.6 52.4 25.4 22.9 -
47-035 35 286 49.2 49.2 54.0 27.0 22.9 -
47-036 36 286 50.8 50.8 54.0 27.0 22.9 -

6 Point 1/2" Drive Deep Impact Sockets METRIC

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number mm g End (mm) End (mm) Length (mm) Clearance (mm) Depth (mm) Shoulder (mm)
47-208 8 181 22.2 13.0 82.0 5.2 9.5 12.5
47-209 9 181 22.2 15.6 82.0 5.6 11.1 12.5
47-210 10 181 22.3 15.6 82.0 9.5 14.5 12.5
47-211 11 181 22.3 16.7 82.0 10.8 14.5 12.5
47-212 12 181 22.3 18.8 82.0 11.4 14.5 12.5
47-213 13 181 24.4 20.1 82.0 12.5 12.7 12.5
47-214 14 181 24.4 22.2 82.0 13.8 12.7 12.5
47-215 15 188 24.4 24.4 82.0 14.8 12.7 -
47-216 16 188 24.4 24.4 82.0 15.6 13.5 -
47-217 17 221 26.6 26.6 82.0 16.5 13.5 -
47-218 18 245 27.8 27.8 82.0 17.0 14.5 -
47-219 19 296 30.1 30.1 82.0 18.0 16.0 -
47-220 20 334 31.8 31.8 82.0 19.0 16.0 -
47-221 21 330 31.8 31.8 82.0 19.0 16.0 -
47-222 22 330 32.0 32.0 82.0 19.0 17.0 -
47-223 23 354 33.3 33.3 82.0 20.0 17.5 -
47-224 24 350 33.3 33.3 82.0 20.0 17.5 -
47-225 25 471 36.5 36.5 83.0 19.1 17.5 -
1/2" Drive

47-226 26 520 38.1 38.1 83.0 19.1 19.8 -

47-227 27 451 38.1 38.1 83.0 20.7 38.0 -
47-228 28 485 39.7 39.7 88.9 20.7 22.2 -
47-229 29 464 41.3 41.3 88.9 27.0 27.9 -
47-230 30 499 41.3 41.3 88.9 27.0 27.9 -
47-232 32 499 44.5 44.5 88.9 28.4 28.6 -
47-234 34 544 50.8 50.8 88.9 33.0 34.3 -
47-235 35 544 50.8 50.8 88.9 33.0 34.3 -
47-236 36 590 50.8 50.8 88.9 33.0 34.3 -

5-20
 5
1/2" Drive

12 Point 1/2" Drive Impact Sockets METRIC

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number mm g End (mm) End (mm) Length (mm) Clearance (mm) Depth (mm) Shoulder (mm)
1/2" Drive

47-310 10 69 22.2 15.5 38.0 9.0 5.0 12.4

47-311 11 70 22.2 16.7 38.0 9.0 6.0 12.4
47-312 12 71 22.2 18.8 38.0 9.0 7.0 12.4
47-313 13 89 24.3 20.1 38.0 13.5 7.0 12.5
47-314 14 83 24.3 20.8 38.0 13.5 9.0 12.5
47-315 15 87 24.3 24.3 38.0 13.5 9.0 -
47-316 16 84 24.3 24.3 38.0 13.5 10.0 -
47-317 17 110 26.7 26.7 38.0 13.5 10.0 -
Impact and Power Sockets, Accessories and Sets

47-318 18 120 27.8 27.8 38.0 13.5 10.5 -

47-319 19 145 30.1 30.1 38.0 14.4 11.5 -
47-320 20 154 30.1 30.1 41.0 15.0 12.0 -
47-321 21 176 31.8 31.8 41.0 15.0 12.0 -
47-322 22 173 32.0 32.0 41.0 15.0 13.0 -
47-323 23 209 33.3 33.3 44.5 16.0 13.0 -
47-324 24 198 33.3 33.3 44.5 17.5 14.0 -
47-330 30 334 41.3 41.3 50.8 22.6 19.1 -
47-332 32 383 44.5 44.5 50.8 24.0 22.2 -

6 Point 1/2" Drive Armstrong Maxx Universal Impact Sockets METRIC

Unique Pinless Reversed Ball design for maximum strength and durability. True 360˚ rotation of socket
end for extended range of motion, long life and smooth operation. Maximum operating angle is 30˚.
A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number mm g End (mm) End (mm) Length (mm) Clearance (mm) Depth (mm) Shoulder (mm)
47-110 10 118 24.6 15.5 71.4 25.0 25.0 -
47-111 11 123 24.6 17.1 71.4 25.0 25.0 -
47-112 12 125 24.6 18.2 71.4 25.0 25.0 -
47-113 13 127 24.6 19.1 71.4 25.0 25.0 -
47-114 14 136 24.6 21.0 71.4 25.0 25.0 -
47-115 15 138 24.6 22.2 71.4 25.0 25.0 -
47-116 16 236 31.0 24.2 77.8 25.0 25.0 -
47-117 17 240 31.0 25.4 77.8 25.0 25.0 -
47-118 18 254 31.0 27.0 79.4 26.2 26.2 -
47-119 19 245 31.0 27.0 79.4 26.2 26.2 -
47-121 21 274 31.0 31.3 80.6 26.2 26.2 -
47-122 22 277 31.0 32.2 80.6 26.2 26.2 -
47-124 24 279 31.0 32.9 81.8 26.2 26.2 -

5-21 Always wear eye protection when near tools in use.

 5
3/4" Drive

6 Point 3/4" Drive Impact Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to

Impact and Power Sockets, Accessories and Sets

Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
21-016 1/2 0.62 1.625 1.000 1.812 0.375 0.350 0.563
21-018 9/16 0.62 1.625 1.032 1.812 0.438 0.350 0.563
21-020 5/8 0.65 1.625 1.093 1.812 0.500 0.350 0.563
21-022 11/16 0.62 1.625 1.156 1.875 0.500 0.400 0.563
21-024 3/4 0.63 1.625 1.250 1.875 0.563 0.450 0.563
21-026 13/16 0.71 1.625 1.375 1.907 0.625 0.500 0.563
21-028 7/8 0.74 1.625 1.500 2.000 0.625 0.580 0.563
21-030 15/16 0.75 1.625 1.625 2.000 0.688 0.600 -
21-032 1 0.74 1.625 1.625 2.000 0.688 0.750 -
21-034 1-1/16 0.76 1.625 1.625 2.062 0.750 0.750 -
21-036 1-1/8 0.87 1.625 1.625 2.125 0.875 0.750 -
21-038 1-3/16 0.94 1.750 1.875 2.125 1.062 0.750 1.425
21-040 1-1/4 1.10 1.750 2.000 2.125 1.125 0.750 1.425
21-042 1-5/16 1.24 1.750 2.000 2.125 1.125 0.875 1.425
21-044 1-3/8 1.33 1.750 2.125 2.250 1.125 0.875 1.550
21-046 1-7/16 1.44 1.750 2.250 2.250 1.125 0.875 1.550
21-048** 1-1/2 1.59 1.750 2.250 2.250 1.125 1.000 1.550
21-050 1-9/16 1.65 1.750 2.375 2.313 1.125 1.000 1.613
21-052 1-5/8 1.73 1.750 2.438 2.375 1.250 1.000 1.675
21-054 1-11/16 1.79 1.875 2.500 2.375 1.250 1.000 1.675
21-056 1-3/4 1.70 1.875 2.500 2.500 1.250 1.125 1.800
21-058 1-13/16 1.70 1.875 2.625 2.500 1.250 1.125 1.800
21-060 1-7/8 1.80 1.875 2.625 2.625 1.437 1.188 1.925
21-062 1-15/16 2.20 1.875 2.812 2.625 1.437 1.188 1.925
21-064 2 2.40 1.875 2.840 2.750 1.437 1.188 2.050
21-066 2-1/16 2.45 1.875 2.995 2.750 1.437 1.250 2.050
21-068 2-1/8 2.50 1.898 2.995 3.043 2.125 1.700 1.990
21-070 2-3/16 3.00 1.898 3.250 3.000 1.562 1.250 2.300
21-072 2-1/4 3.30 1.898 3.250 3.125 1.562 1.313 2.425
21-076 2-3/8 3.50 1.898 3.250 3.483 2.380 2.000 2.360
**Can be used for removal of Budd Wheels.
ASME B107.2 Fed'I Spec. GGG-W-660a

6 Point 3/4" Drive Deep Impact Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
21-218 9/16 1.31 1.625 1.000 3.250 0.421 0.750 0.813
21-220 5/8 1.36 1.625 1.094 3.250 0.484 0.750 0.813
21-222 11/16 1.32 1.625 1.156 3.250 0.484 0.750 0.813
21-224 3/4 1.30 1.625 1.250 3.250 0.546 0.750 0.813
21-226 13/16 1.31 1.625 1.313 3.250 0.609 0.875 0.813
21-228 7/8 1.40 1.625 1.500 3.250 0.671 0.875 0.813
21-230 15/16 1.37 1.625 1.625 3.250 0.671 1.000 -
21-232 1 1.30 1.625 1.625 3.250 0.671 1.000 -
21-234 1-1/16 1.49 1.625 1.750 3.250 0.703 1.000 2.450
21-236 1-1/8 1.44 1.625 1.750 3.250 0.796 1.000 2.450
21-238 1-3/16 1.60 1.625 1.875 3.250 0.796 1.000 2.450
21-240 1-1/4 1.90 1.750 2.000 3.250 0.828 1.063 2.450
21-242 1-5/16 1.94 1.750 2.000 3.375 0.953 1.063 2.575
21-244 1-3/8 2.03 1.750 2.125 3.500 0.953 1.125 2.700
21-246 1-7/16 2.21 1.750 2.250 3.500 1.061 1.125 2.700
21-248** 1-1/2 2.30 1.750 2.250 3.500 1.078 1.250 2.700
3/4" Drive

21-250 1-9/16 2.40 1.750 2.395 3.483 1.560 1.250 2.600

21-252 1-5/8 2.44 1.750 2.438 3.500 1.560 1.313 2.700
21-254 1-11/16 3.02 1.875 2.500 3.500 1.560 1.313 2.700
21-256 1-3/4 2.20 1.875 2.500 3.625 1.560 1.375 2.825
21-258 1-13/16 2.20 1.875 2.625 3.625 1.560 1.375 2.825
21-260 1-7/8 2.50 1.875 2.625 3.625 1.560 1.438 2.825
21-262 1-15/16 2.70 1.875 2.812 3.625 1.560 1.428 2.825
21-264 2 2.90 1.875 2.840 3.750 1.560 1.500 2.950
**Can be used for removal of Budd Wheels.
ASME B107.2 Fed'I Spec GGG-W-660a

5-22
 5
3/4" Drive

8 Point 3/4" Drive Impact Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
3/4" Drive

21-420 5/8 0.58 1.625 1.250 1.875 0.500 0.375 0.750

21-422 11/16 0.80 1.618 1.343 2.108 0.688 0.700 0.890
21-424 3/4 0.68 1.625 1.500 1.907 0.563 0.400 0.750
21-426** 13/16 0.72 1.625 1.625 2.000 0.625 0.470 -
21-428 7/8 0.80 1.625 1.750 1.875 0.609 0.563 1.125
21-430** 15/16 0.87 1.625 1.813 1.875 0.671 0.594 1.125
21-432 1 1.02 1.625 1.938 2.000 1.062 0.625 1.250
21-434 1-1/16 1.10 1.750 2.000 2.000 1.062 0.656 1.250
Impact and Power Sockets, Accessories and Sets

21-436 1-1/8 1.28 1.750 2.125 2.125 1.062 0.688 1.375

21-438 1-3/16 1.70 1.898 2.308 2.483 1.180 1.300 1.630
21-440 1-1/4 1.60 1.750 2.375 2.125 1.062 0.688 1.375
21-442 1-5/16 2.00 1.898 2.498 2.608 1.310 1.400 1.700
21-446 1-7/16 1.98 1.750 2.250 2.250 0.625 0.766 1.500
**Can be used for removal of Budd Wheels
ASME B107.2 Fed'I Spec GGG-W-660a

12 Point 3/4" Drive Impact Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
21-118 9/16 0.61 1.625 1.000 1.750 0.750 0.406 0.736
21-120 5/8 0.62 1.625 1.094 1.750 0.750 0.438 0.771
21-122 11/16 0.62 1.625 1.156 1.750 0.750 0.500 0.767
21-124 3/4 0.64 1.625 1.250 1.750 0.750 0.500 0.752
21-126 13/16 0.70 1.625 1.375 1.875 0.750 0.531 0.789
21-128 7/8 0.72 1.625 1.500 1.875 0.750 0.563 0.714
21-130 15/16 0.79 1.625 1.625 2.000 0.750 0.625 -
21-132 1 0.77 1.625 1.625 2.000 0.750 0.625 -
21-134 1-1/16 0.73 1.625 1.625 2.000 0.750 0.688 -
21-136 1-1/8 0.73 1.625 1.625 2.125 0.785 0.688 0.688
21-138 1-3/16 0.95 1.625 1.875 2.125 0.815 0.750 0.688
21-140 1-1/4 1.05 1.625 2.000 2.125 0.815 0.750 0.688
21-142 1-5/16 1.06 1.750 2.000 2.125 0.940 0.875 0.688
21-144 1-3/8 1.25 1.750 2.125 2.250 0.940 0.875 0.688
21-146 1-7/16 1.37 1.750 2.250 2.250 1.005 0.875 0.688
21-148 1-1/2 1.59 1.750 2.313 2.500 1.065 1.000 0.688
21-150 1-9/16 1.64 1.750 2.375 2.500 1.065 1.000 0.688
21-152 1-5/8 1.68 1.750 2.438 2.500 1.130 1.000 0.688
21-154 1-11/16 1.89 1.875 2.500 2.625 1.190 1.125 0.688
21-156 1-3/4 1.81 1.875 2.500 2.625 1.190 1.125 0.688
21-158 1-13/16 1.98 1.875 2.625 2.625 1.255 1.125 0.688
21-160 1-7/8 1.99 1.875 2.625 2.750 1.315 1.188 0.688
21-162 1-15/16 2.31 1.875 2.812 2.750 1.380 1.188 0.688
21-164 2 2.44 1.875 2.840 2.875 1.440 1.188 0.688
21-166 2-1/16 2.87 1.875 3.000 3.000 1.440 1.250 0.688
21-168 2-1/8 2.96 1.898 3.000 3.125 1.505 1.250 0.688
21-170 2-3/16 3.57 1.898 3.250 3.125 1.505 1.250 0.688
21-172 2-1/4 3.61 1.898 3.250 3.250 1.565 1.313 0.688
21-176 2- 3/8 3.79 1.898 3.250 3.483 1.565 1.313 0.688

5-23 Always wear eye protection when near tools in use.

 5
3/4" Drive

6 Point 3/4" Drive Budd Wheel Socket

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to

Impact and Power Sockets, Accessories and Sets

Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
21-505 1-1/2x13/16 2.87 1.750 2.250 4.000 1.062 0.656 3.250
Dual opening socket. Square (13/16”) opening threads shaft onto wheel; then hex (1-1/2”) opening engages and tightens nut.

3/4" Drive Impact Hex Bit Sockets

A B C D E
Product Opening Weight Drive Wrench Overall Bolt Wrench Bit
Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Part No.
21-718 9/16 0.71 1.05 1.125 3.937 2.312 1.062 94-518
21-719 5/8 0.75 1.15 1.250 3.937 2.312 1.062 94-519
21-721 3/4 0.82 1.60 1.500 4.437 2.500 1.375 94-521
21-723 7/8 0.87 1.90 1.625 4.500 2.625 1.375 94-523
21-725 1 0.93 2.20 1.750 4.625 2.750 1.375 94-525

3/4" Drive

5-24
 5
3/4" Drive

3/4" Drive Impact Extensions

Product Weight Overall
Number lbs. Length (in)
21-923 1.80 7.000
3/4" Drive

21-924 2.54 10.000

21-925 3.29 13.000
ASME B107.2 Fed'I Spec. GGG-W-660a

3/4" Drive Impact Universal Joint

Product Weight Overall
Impact and Power Sockets, Accessories and Sets

Number lbs. Length (in) Rotation

21-947 1.21 3.313 25˚
ASME B107.2 Fed'I Spec. GGG-W-660a

3/4" Drive Impact Drive Adapters

Product Weight Overall
Number lbs. Description Length (in)
21-951 0.64 3/4" F, 1/2" M 2.094
21-952* 0.85 3/4" F, 1" M 2.500
21-953 0.67 3/4" F, 5/8" M 2.125
ASME B107.2 Fed'I Spec. GGG-W-660a
*Through hole on square drive

3/4" Drive O-Ring and Retainer Pin

Product Weight Pin
Number lbs. Description Dia (in)
21-962 0.01 1-7/16" Dia. O-Ring -
21-963 0.01 1-1/2" Lg. Retainer Pin 3/16
For use with all 3/4" Drive Impact Sockets and Attachments

3/4" Drive Ret Rings

Product I. D. Hub
No. of Ring (in) Dia. Skt. (in) Use with Armstrong Product
21-964 1-7/16 1-5/8 21-016 through 21-038, 21-218 through 21-238,
21-420 through 21-432, 21-718 through 21-719,
48-019 through 48-030, 48-221 through 48-230,
48-719 through 48-722, 21-923 through 21-953
21-965 1-5/8 1-3/4 21-040 through 21-048, 21-240 through 21-254,
21-434 through 21-466, 21-505,
48-032 through 48-036, 48-232 through 48-241,
48-724 through 48-725, 21-721 through 21-723
21-967 1-3/4 1-7/8 21-052 through 21-064, 21-256 through 21-264,
48-041 through 48-050, 48-726, 21-725

5-25 Always wear eye protection when near tools in use.

 5
3/4" Drive

6 Point 3/4" Drive Impact Sockets METRIC

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to

Impact and Power Sockets, Accessories and Sets

Number mm g End (mm) End (mm) Length (mm) Clearance (mm) Depth (mm) Shoulder (mm)
48-017 17 268 41.3 29.4 47.6 13.9 11.4 19.1
48-019 19 281 41.3 32.5 47.6 14.7 12.7 19.1
48-020 20 300 41.3 35.3 49.2 14.7 14.0 19.1
48-021 21 309 41.3 35.3 49.2 15.5 14.0 19.1
48-022 22 327 41.3 38.5 50.0 17.1 14.0 19.1
48-023 23 335 41.3 41.3 50.8 18.3 15.2 -
48-024 24 354 41.3 41.3 50.8 18.3 15.2 -
48-025 25 345 41.3 41.3 50.8 18.3 17.5 -
48-026 26 349 41.3 41.3 50.8 18.3 17.5 -
48-027 27 345 41.3 41.3 50.8 18.3 17.5 -
48-028 28 408 41.3 44.3 54.0 28.0 25.4 35.0
48-030 30 413 41.3 47.6 54.0 27.0 18.2 35.0
48-031 31 454 41.3 47.6 54.0 31.0 25.4 35.0
48-032 32 454 44.5 50.8 54.0 27.0 19.0 35.0
48-033 33 454 44.5 50.7 54.0 33.0 25.4 35.0
48-034 34 480 44.5 50.8 55.6 27.0 20.6 36.6
48-035 35 499 45.7 53.8 56.8 35.0 30.5 34.0
48-036 36 631 45.7 57.2 57.2 35.0 21.4 38.2
48-037 37 544 45.7 58.5 56.8 37.0 30.5 34.4
48-038 38 590 45.7 58.5 56.8 38.0 30.5 34.4
48-041 41 776 45.7 61.9 60.3 31.0 23.8 41.3
48-042 42 771 48.7 62.5 64.6 42.0 35.6 42.0
48-043 43 816 48.7 63.3 66.3 43.0 38.1 43.4
48-046 46 980 48.7 69.9 65.0 35.0 25.4 46.0
48-050 50 1125 48.7 74.0 68.2 36.9 27.0 49.2

6 Point 3/4" Drive Deep Impact Sockets METRIC

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number mm g End (mm) End (mm) Length (mm) Clearance (mm) Depth (mm) Shoulder (mm)
48-219 19 499 41.1 31.4 78.6 19.0 38.1 25.4
48-221 21 596 41.3 35.3 82.5 15.5 13.5 19.0
48-222 22 636 41.3 38.3 82.5 17.1 14.3 19.0
48-223 23 630 41.3 41.3 88.9 17.5 15.1 -
48-224 24 623 41.3 41.3 88.9 18.6 16.7 -
48-226 26 634 41.3 44.5 82.6 25.4 25.4 23.8
48-227 27 677 41.3 44.5 82.6 25.4 25.4 23.8
48-230 30 821 41.3 47.6 88.9 22.6 25.4 69.0
48-232 32 939 44.5 50.8 88.9 25.0 25.4 69.0
48-233 33 892 44.5 50.8 88.9 27.8 25.4 69.0
48-235 35 1140 44.5 50.8 88.9 27.8 25.4 69.0
48-236 36 1146 44.5 57.2 88.9 27.8 25.4 69.0
48-238 38 1043 48.7 58.5 88.9 38.0 58.4 67.0
48-241 41 1279 48.7 61.9 88.9 30.9 31.8 69.0
48-243 43 1134 48.7 63.3 88.9 43.0 58.4 65.6

3/4" Drive Impact Hex Bit Sockets METRIC

A B C D E
Product Opening Weight Drive Wrench Overall Bolt Wrench Bit
Number mm g End (mm) End (mm) Length (mm) Clearance (mm) Depth (mm) Part No.
48-719 14 470 41.3 28.6 100.0 58.7 27.0 94-619
3/4" Drive

48-722 17 520 41.3 31.8 101.6 58.7 27.0 94-622

48-724 19 750 44.5 38.1 111.1 63.5 34.9 94-624
48-725 22 850 44.5 41.3 114.3 66.7 34.9 94-625
48-726 24 1000 47.6 44.5 117.5 69.9 34.9 94-626

5-26
 5
1" Drive

6 Point 1" Drive Impact Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
1" Drive

22-024 3/4 1.31 2.125 0.763 2.250 0.546 0.500 0.812

22-026 13/16 1.38 2.125 0.826 2.250 0.609 0.531 0.875
22-028 7/8 1.40 2.125 0.888 2.250 0.671 0.531 0.875
22-030 15/16 1.39 2.125 0.953 2.375 0.671 0.625 0.875
22-032 1 1.48 2.125 1.015 2.375 0.671 0.656 0.875
22-034 1-1/16 1.46 2.125 1.077 2.375 0.703 0.656 0.875
22-036 1-1/8 1.55 2.125 1.133 2.438 0.796 0.687 0.875
22-038 1-3/16 1.54 2.125 1.204 2.500 0.796 0.750 0.875
Impact and Power Sockets, Accessories and Sets

22-040 1-1/4 1.52 2.125 1.267 2.500 0.828 0.812 0.875

22-042 1-5/16 1.64 2.125 2.125 2.562 0.953 0.843 -
22-044 1-3/8 1.84 2.250 2.250 2.562 0.953 0.843 -
22-046 1-7/16 1.84 2.250 2.250 2.562 1.015 0.843 -
22-048** 1-1/2 1.99 2.250 2.312 2.625 1.078 0.875 1.750
22-050 1-9/16 1.91 2.250 2.375 2.625 1.078 0.875 1.750
22-052 1-5/8 2.04 2.250 2.437 2.625 1.140 0.875 1.750
22-054 1-11/16 2.16 2.250 2.500 2.687 1.203 1.000 1.812
22-056** 1-3/4 2.33 2.250 2.625 2.687 1.203 1.000 1.812
22-058 1-13/16 2.60 2.250 2.750 2.750 1.265 1.000 1.875
22-060 1-7/8 2.66 2.250 2.750 2.875 1.328 1.093 2.000
22-062 1-15/16 2.86 2.250 2.875 2.875 1.328 1.093 2.000
22-064 2 3.13 2.250 3.000 2.937 1.390 1.093 2.062
22-066 2-1/16 3.24 2.250 3.000 3.062 1.453 1.218 2.187
22-068 2-1/8 3.64 2.375 3.125 3.125 1.453 1.218 2.250
22-070 2-3/16 3.94 2.375 3.250 3.125 1.453 1.218 2.250
22-072 2-1/4 3.91 2.375 3.250 3.250 1.515 1.312 2.375
22-074 2-5/16 4.33 2.375 3.375 3.312 1.578 1.312 2.500
22-076 2-3/8 4.72 2.375 3.500 3.312 1.578 1.312 2.500
22-078 2-7/16 4.87 2.375 3.500 3.500 1.703 1.375 2.625
22-080 2-1/2 5.40 2.375 3.750 3.500 1.703 1.375 2.625
22-082 2-9/16 6.11 2.375 3.750 3.500 1.765 1.375 2.625
22-084 2-5/8 6.63 2.375 3.750 3.687 1.828 1.468 2.812
22-086 2-11/16 6.27 2.375 4.000 3.687 1.828 1.468 2.812
22-088 2-3/4 6.26 2.375 4.000 3.687 1.890 1.500 2.812
22-090 2-13/16 6.28 2.375 4.000 3.875 1.953 1.625 3.000
22-092 2-7/8 6.37 2.375 4.000 3.937 1.953 1.625 3.062
22-094 2-15/16 6.74 2.375 4.125 3.937 1.953 1.625 3.062
22-096 3 7.30 2.375 4.250 4.062 2.140 1.718 3.187
22-100 3-1/8 7.76 2.375 4.375 4.125 2.140 1.718 3.250
22-104 3-1/4 8.51 2.375 4.500 4.125 2.140 1.718 3.250
22-108 3-3/8 9.20 2.375 4.750 4.500 2.390 1.937 3.375
22-112 3-1/2 9.28 2.375 4.750 4.500 2.390 1.937 3.375
22-116 3-5/8 10.33 2.375 5.000 4.500 2.390 1.937 3.375
22-118 3-7/8 12.20 3.248 5.103 5.235 2.870 2.400 3.810
22-120 4 14.90 3.248 5.243 5.360 2.870 2.510 3.900
22-122 4-1/8 15.40 3.248 5.383 5.360 2.870 2.600 3.860
22-124 4-1/4 16.20 3.248 5.523 5.485 2.870 2.740 3.940
22-126 4-1/2 17.40 3.248 5.803 5.610 3.100 2.830 3.990
**Can be used for removal of Budd Wheels. ASME B107.2 Fed'I Spec. GGG-W-660a

5-27 Always wear eye protection when near tools in use.

 5
1" Drive

6 Point 1" Drive Deep Impact Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to

Impact and Power Sockets, Accessories and Sets

Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
22-228 7/8 2.72 2.000 1.531 3.250 0.671 0.562 0.937
22-230 15/16 2.68 2.000 1.593 3.250 0.671 0.625 0.937
22-232 1 2.84 2.000 1.750 3.250 0.671 0.625 0.937
22-234 1-1/16 2.79 2.000 1.750 3.250 0.703 0.656 0.937
22-236 1-1/8 2.95 2.125 1.812 3.250 0.796 0.678 0.937
22-238 1-3/16 2.91 2.125 1.875 3.250 0.796 0.750 0.937
22-240 1-1/4 2.86 2.125 2.000 3.250 0.828 0.750 0.937
22-242 1-5/16 3.07 2.125 2.125 3.500 0.953 0.843 -
22-244 1-3/8 3.42 2.250 2.125 3.500 0.953 0.843 0.937
22-246 1-7/16 3.43 2.250 2.250 3.500 1.015 0.843 -
22-248** 1-1/2 3.68 2.250 2.312 3.500 1.078 0.875 2.625
22-250 1-9/16 3.51 2.250 2.375 3.500 1.078 0.875 2.625
22-252 1-5/8 3.73 2.250 2.437 3.500 1.140 0.875 2.625
22-254 1-11/16 3.93 2.250 2.500 3.750 1.203 1.000 2.875
22-256** 1-3/4 4.24 2.250 2.625 3.750 1.203 1.000 2.875
22-258 1-13/16 4.71 2.250 2.750 3.750 1.265 1.000 2.875
22-260 1-7/8 4.79 2.250 2.750 4.000 1.328 1.093 3.125
22-262 1-15/16 5.12 2.250 2.875 4.000 1.328 1.093 3.125
22-264 2 5.57 2.250 3.000 4.000 1.359 1.093 3.125
22-266 2-1/16 5.73 2.250 3.000 4.250 1.453 1.218 3.375
22-268 2-1/8 6.41 2.375 3.125 4.250 1.453 1.218 3.375
22-270 2-3/16 6.90 2.375 3.250 4.250 1.515 1.218 3.375
22-272 2-1/4 6.80 2.375 3.250 4.500 1.578 1.312 3.625
22-274 2-5/16 7.49 2.375 3.375 4.500 1.578 1.312 3.625
22-276 2-3/8 8.07 2.375 3.500 4.500 1.578 1.312 3.625
22-282 2-9/16 4.70 2.733 3.708 4.858 2.560 3.300 3.690
22-288 2-3/4 4.70 2.713 3.828 5.108 2.750 3.500 3.900
**Can be used for removal of Budd Wheels. ASME B107.2 Fed'I Spec. GGG-W-660a

4 Point 1" Drive Impact Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
22-424 3/4 1.61 2.125 1.878 2.250 0.546 0.500 1.000
22-426 13/16 1.57 2.125 1.940 2.250 0.609 0.500 1.000
22-428 7/8 1.60 2.125 2.000 2.250 0.609 0.531 1.000
22-430** 15/16 1.69 2.125 2.125 2.500 0.672 0.594 -
22-432 1 1.71 2.125 2.125 2.500 0.671 0.593 -
22-436 1-1/8 1.99 2.250 2.250 2.500 0.796 0.750 -
ASME B107.2 Fed'I Spec. GGG-W-660a
**8 point
1" Drive

5-28
 5
1" Drive

6 Point 1" Drive Impact Sockets METRIC

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number mm g End (mm) End (mm) Length (mm) Clearance (mm) Depth (mm) Shoulder (mm)
1" Drive

49-019 19 499 50.9 36.5 56.8 19.1 12.7 16.7

49-022 22 499 50.9 38.8 57.5 19.1 13.7 16.7
49-024 24 499 50.9 39.6 57.5 19.1 14.7 17.8
49-027 27 544 50.9 44.3 64.6 20.3 17.8 20.3
49-028 28 590 50.9 45.7 64.6 20.3 19.1 21.6
49-030 30 680 52.5 52.5 67.8 25.4 19.1 -
49-032 32 680 52.5 52.5 67.8 25.4 19.1 -
49-033 33 680 52.5 52.5 67.8 25.4 19.1 -
Impact and Power Sockets, Accessories and Sets

49-036 36 726 53.5 57.0 67.8 36.1 27.9 44.3

49-041 41 816 56.7 63.3 67.8 41.0 30.5 43.4
49-046 46 1043 61.4 69.7 67.8 46.0 38.1 43.0
49-050 50 1224 61.4 75.5 75.8 50.0 38.1 49.3
49-055 55 1587 61.4 82.4 80.5 55.0 40.6 52.0
49-060 60 1678 61.4 88.7 81.8 60.0 43.2 51.4
49-065 65 2086 69.4 94.2 83.8 65.0 43.2 54.2
ASME B107.2 Fed'I Spec. GGG-W-660a

6 Point 1" Drive Budd Wheel Socket

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
22-505 1-1/2x13/16 3.56 2.250 2.312 4.000 0.750 0.291 3.313
Double opening socket. Square (13/16") opening threads shaft onto wheel; then hex (1-1/2”) opening engages and tightens nut.

5-29 Always wear eye protection when near tools in use.

 5
1" Drive

1" Drive Impact Extensions

Product Weight Overall
Number lbs. Length (in)

Impact and Power Sockets, Accessories and Sets

22-923 3.50 7.000
22-925 6.85 13.000
ASME B107.2 Fed'I Spec. GGG-W-660a

1" Drive Impact Universal Joint

Product Weight Overall
Number lbs. Length (in) Rotation
22-947 2.71 4.438 25˚
ASME B107.2 Fed'I Spec. GGG-W-660a

1" Drive Impact Drive Adapter

Product Weight Overall
Number lbs. Description Length (in)
22-951 1.79 1" F, 3/4" M 3.000
22-952 2.03 1" F, 1-1/2" M 3.563

1" Drive O-Ring and Retainer Pin

Product Weight Pin
Number lbs. Description Dia. (in)
22-962 0.01 1-3/4" Dia. O-Ring -
22-963 0.02 1-7/8" Lg. Retainer Pin 3/16"
For use with all 1" Drive Impact Sockets and Attachments

1" Drive Ret Rings

Product I. D. Hub
Number of Ring (in) Dia. Skt. (in) Use with Armstrong Product
1" Drive

22-964 2 2-1/8 22-024 through 22-042,

22-228 through 22-242,
22-424 through 22-432,
22-954
22-965 2-1/8 2-1/4 & 2-3/8 22-044 through 22-116,
22-244 through 22-276,
22-436, 22-505
22-923 through 22-952

5-30
 5
1-1/2" Drive

6 Point 1-1/2" Drive Impact Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
1-1/2" Drive

23-044 1-3/8 4.75 3.250 2.750 3.125 0.953 0.800 1.125

23-046 1-7/16 4.71 3.250 2.750 3.125 1.016 0.900 1.125
23-048 1-1/2 4.71 3.250 2.875 3.125 1.078 0.950 1.125
23-050 1-9/16 4.50 3.250 2.875 3.220 1.300 1.000 1.200
23-052 1-5/8 4.76 3.250 3.000 3.125 1.141 1.125 1.125
23-054 1-11/16 4.73 3.250 3.000 3.125 1.203 1.125 1.125
23-056 1-3/4 4.90 3.250 3.125 3.310 1.300 1.110 1.400
23-058 1-13/16 4.95 3.250 3.125 3.310 1.266 1.250 1.500
23-060 1-7/8 4.80 3.250 3.125 3.500 1.328 1.250 1.500
Impact and Power Sockets, Accessories and Sets

23-062 1-15/16 4.90 3.250 3.125 3.625 1.300 1.220 1.600

23-064 2 5.25 3.250 3.250 3.625 1.516 1.300 1.750
23-066 2-1/16 5.76 3.250 3.500 3.625 1.516 1.375 2.375
23-068 2-1/8 5.87 3.250 3.500 3.625 1.516 1.420 2.375
23-070 2-3/16 6.05 3.250 3.500 3.625 1.516 1.500 2.375
23-072 2-1/4 0.65 3.250 3.750 3.940 1.578 1.500 2.700
23-074 2-5/16 6.70 3.750 3.750 3.940 2.310 2.100 -
23-076 2-3/8 7.61 3.750 3.750 4.125 1.578 1.750 -
23-078 2-7/16 8.01 3.750 3.750 4.125 1.703 1.750 -
23-080 2-1/2 8.15 3.750 3.750 4.125 1.766 1.750 -
23-082 2-9/16 7.91 3.750 4.000 4.125 1.766 1.750 3.000
23-084 2-5/8 8.54 3.750 4.000 4.250 1.828 1.750 3.000
23-086 2-11/16 7.90 3.750 4.098 4.280 2.680 2.400 3.000
23-088 2-3/4 8.52 3.750 4.218 4.375 1.891 2.000 3.000
23-090 2-13/16 8.60 3.750 4.218 4.375 2.810 2.500 3.000
23-092 2-7/8 9.72 3.750 4.375 4.500 1.953 2.500 3.250
23-094 2-15/16 9.72 3.750 4.500 4.500 1.953 2.500 3.250
23-096 3 9.95 3.750 4.500 4.625 2.141 2.625 3.375
23-098 3-1/16 11.00 3.750 4.750 4.655 3.060 2.700 3.625
23-100 3-1/8 11.24 3.750 4.750 4.655 2.141 2.700 3.625
23-102 3-3/16 11.00 3.750 4.718 4.750 3.180 2.800 3.180
23-104 3-1/4 12.00 3.750 5.000 4.830 3.250 2.800 3.190
23-106 3-5/16 12.00 3.750 5.000 4.890 3.310 2.900 3.250
23-108 3-3/8 11.87 3.750 5.000 4.625 2.391 2.500 3.425
23-110 3-7/16 12.00 3.750 5.000 4.985 3.430 3.000 3.340
23-112 3-1/2 12.42 3.750 5.000 5.000 2.391 3.000 3.800
23-114 3-9/16 12.00 3.750 5.100 5.125 3.560 3.100 3.450
23-116 3-5/8 16.27 3.750 5.250 5.125 2.438 3.100 3.925
23-118 3-11/16 12.50 3.750 5.200 5.250 3.680 3.100 3.550
23-120 3-3/4 15.51 3.750 5.500 5.250 2.625 2.420 4.050
23-122 3-13/16 17.00 3.750 5.500 5.370 2.500 2.420 3.580
23-124 3-7/8 14.77 3.750 5.500 5.370 2.750 2.510 4.170
23-126 3-15/16 20.00 3.750 5.750 5.480 2.600 2.510 3.620
23-128 4 17.19 3.750 5.750 5.480 2.875 2.510 4.280
23-130 4-1/16 20.00 3.750 5.750 5.530 2.700 2.600 3.670
23-132 4-1/8 16.92 3.750 5.750 5.530 2.875 2.610 4.330
23-134 4-3/16 21.00 3.750 6.000 5.600 2.800 2.630 3.670
23-136 4-1/4 20.08 3.750 6.000 5.600 3.125 2.760 4.400
23-138 4-5/16 23.00 3.750 6.000 5.765 2.800 2.760 3.830
23-140 4-3/8 23.00 3.750 6.203 5.765 2.800 2.760 3.770
23-142 4-7/16 23.00 3.750 6.203 5.835 2.900 2.810 3.840
23-144 4-1/2 29.40 3.750 6.250 6.000 3.125 2.850 4.800
23-148 4-5/8 28.30 3.750 6.250 6.000 3.313 3.010 4.800
23-152 4-3/4 24.00 3.750 6.380 6.140 3.200 3.030 4.100
23-160 5 30.82 3.750 7.250 7.000 3.531 3.125 5.800
ASME B107.2 Fed'I Spec GGG-W-660a

5-31 Always wear eye protection when near tools in use.

 5
1-1/2" Drive

6 Point 1-1/2" Drive Deep Impact Sockets

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to

Impact and Power Sockets, Accessories and Sets

Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
23-244 1-3/8 10.00 3.250 2.748 5.655 1.080 0.800 0.850
23-246 1-7/16 10.00 3.250 2.748 5.655 1.080 0.880 0.900
23-248 1-1/2 10.00 3.250 2.873 5.655 1.080 0.940 0.950
23-252 1-5/8 10.00 3.250 2.998 5.655 1.080 1.070 1.100
23-254 1-11/16 10.00 3.250 2.998 5.655 1.340 1.070 1.100
23-256 1-3/4 10.00 3.250 3.123 5.655 1.400 1.120 1.200
23-258 1-13/16 10.00 3.250 3.123 5.655 1.450 1.150 1.600
23-260 1-7/8 10.00 3.250 3.125 5.655 1.500 1.200 1.600
23-264 2 10.00 3.270 3.270 5.655 1.600 1.260 -
23-266 2-1/16 10.00 3.270 3.270 5.655 1.680 1.310 -
23-268 2-1/8 10.00 3.498 3.498 5.655 1.720 1.360 -
23-270 2-3/16 10.00 3.498 3.498 5.655 1.800 1.380 -
23-272 2-1/4 12.50 3.748 3.748 6.030 2.100 1.420 -
23-274 2-5/16 12.50 3.748 3.748 6.030 2.100 1.470 -
23-276 2-3/8 12.50 3.748 3.748 6.030 2.100 1.510 -
23-278 2-7/16 13.00 3.748 3.823 6.030 2.100 1.580 4.740
23-280 2-1/2 13.00 3.748 3.873 6.030 2.100 1.590 4.710
23-282 2-9/16 13.00 3.748 3.998 6.030 2.100 1.620 4.670
23-284 2-5/8 13.00 3.748 3.998 6.030 2.100 1.670 4.670
23-286 2-11/16 13.50 3.748 4.048 6.030 2.100 1.700 4.640
23-288 2-3/4 14.00 3.748 4.218 6.030 2.100 1.760 4.610
23-290 2-13/16 14.50 3.748 4.218 6.280 2.200 1.790 4.860
23-292 2-7/8 16.50 3.748 4.478 6.280 2.200 1.820 4.780
23-294 2-15/16 17.00 3.748 4.478 6.280 2.300 1.850 4.780
23-296 3 18.00 3.748 4.718 6.280 2.300 2.000 4.710
23-298 3-1/16 18.00 3.748 4.718 6.280 2.300 2.000 4.710
23-300 3-1/8 18.00 3.748 4.718 6.280 2.500 2.010 4.710
23-302 3-3/16 18.00 3.748 4.718 6.405 2.500 2.010 4.840
23-304 3-1/4 20.00 3.748 4.978 6.405 2.500 2.050 4.760
23-306 3-5/16 20.00 3.748 4.978 6.405 2.500 2.100 4.760
23-308 3-3/8 20.00 3.748 4.978 6.405 2.500 2.130 4.760
23-310 3-7/16 20.00 3.748 4.978 6.405 2.500 2.170 4.760
23-312 3-1/2 20.00 3.748 5.098 6.405 2.500 2.260 4.730
23-314 3-9/16 20.00 3.748 5.098 6.405 2.500 2.260 4.730
23-316 3-5/8 22.00 3.748 5.198 6.780 2.500 2.290 5.080
23-318 3-11/16 22.00 3.748 5.198 6.780 2.500 2.340 5.080
23-320 3-3/4 25.00 3.748 5.468 6.780 2.500 2.380 5.000
23-322 3-13/16 25.00 3.748 5.498 6.780 2.500 2.420 4.990
23-324 3-7/8 26.00 3.748 5.498 7.030 2.500 2.510 5.240
23-326 3-15/16 28.00 3.748 5.748 7.030 2.600 2.510 5.170
23-328 4 28.00 3.748 5.748 7.030 2.600 2.510 5.170
23-330 4-1/16 28.00 3.748 5.748 7.030 2.700 2.600 5.170
23-332 4-1/8 35.00 3.748 5.998 7.780 2.800 2.600 5.850
23-334 4-3/16 35.00 3.748 5.998 7.780 2.800 2.630 5.850
23-336 4-1/4 35.00 3.748 5.998 7.780 2.800 2.760 5.850
23-338 4-5/16 35.00 3.748 6.003 7.780 2.800 2.760 5.840
23-340 4-3/8 37.00 3.748 6.203 7.780 2.800 2.760 5.790
23-344 4-1/2 37.00 3.748 6.203 7.780 3.000 2.840 5.790
23-348 4-5/8 37.00 3.748 6.378 7.780 3.200 3.010 5.740
23-352 4-3/4 37.00 3.748 6.378 7.780 3.200 3.010 5.740

1-1/2" Drive Impact Extensions

Product Weight Overall
Number lbs. Length (in)
1-1/2" Drive

23-924 8.75 8.000

23-928 15.20 15.000
ASME B107.2 Fed'I Spec GGG-W-660a

5-32
 5
1-1/2" Drive

1-1/2" Drive Impact Universal Joint

Product Weight Overall
Number lbs. Length (in) Rotation
1-1/2" Drive

23-947 5.38 6.000 25˚

ASME B107.2 Fed'I Spec GGG-W-660a
Impact and Power Sockets, Accessories and Sets

1-1/2" Drive Impact Drive Adapter

Product Weight Overall
Number lbs. Description Length (in)
23-951 5.35 1-1/2" F, 1" M 3.437
ASME B107.2 Fed'I Spec. GGG-W-660a

1-1/2" Drive O-Ring and Retainer Pin

Product Weight Pin
Number lbs. Description Dia. (in)
23-962 0.01 2-7/8" Dia. O-Ring -
23-963 0.02 2-7/8" Lg. Retainer Pin 1/4"
For use with all 1-1/2" Drive Impact Sockets and Attachments

1-1/2" Drive Ret Rings

Product I.D. of
Number Ring (in) Hub Dia. Skt (in) Use With Armstrong Product
23-964 2-7/8 3-1/4 23-044 through 23-160, 23-924 through 23-951

5-33 Always wear eye protection when near tools in use.

 5
2-1/2" Drive

6 Point 2-1/2" Drive Impact Sockets*

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to

Impact and Power Sockets, Accessories and Sets

Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
24-064 2 20.0 5.394 3.661 5.118 2.000 1.181 2.205
24-068 2 1/8 20.2 5.394 3.740 5.118 2.125 1.181 2.205
24-072 2 1/4 20.5 5.394 3.858 5.118 2.250 1.181 2.205
24-076 2 3/8 20.9 5.394 3.937 5.118 2.375 1.378 2.205
24-084 2 5/8 21.3 5.394 4.173 5.118 2.625 1.575 2.205
24-088 2 3/4 21.1 5.394 4.331 5.118 2.750 1.575 2.205
24-094 2 15/16 21.1 5.394 4.646 5.118 2.938 1.772 2.205
24-096 3 20.9 5.394 4.724 5.118 3.000 1.772 2.205
24-100 3 1/8 20.9 5.394 4.961 5.118 3.125 1.772 2.205
24-108 3 3/8 20.7 5.394 5.236 5.118 3.375 1.969 2.205
24-112 3 1/2 23.1 5.394 5.591 5.512 3.500 1.969 3.543
24-116 3 5/8 24.2 5.394 5.709 5.512 3.625 2.165 3.543
24-120 3 3/4 24.2 5.394 5.827 5.512 3.750 2.165 3.543
24-124 3 7/8 25.3 5.394 5.945 5.512 3.875 2.165 3.543
24-128 4 25.3 5.394 6.102 5.512 4.000 2.165 3.543
24-132 4 1/8 26.4 5.394 6.220 5.906 4.125 2.362 3.937
24-136 4 1/4 27.5 5.394 6.417 5.906 4.250 2.559 3.937
24-140 4 3/8 28.6 5.394 6.575 5.906 4.375 2.559 3.937
24-144 4 1/2 29.7 5.394 6.772 5.906 4.500 2.559 3.937
24-148 4 5/8 35.2 6.299 7.008 5.906 4.625 2.756 3.937
24-152 4 3/4 36.3 6.299 7.126 5.906 4.750 2.756 3.937
24-156 4 7/8 40.7 6.299 7.323 5.906 4.875 2.953 3.937
24-160 5 45.1 6.299 7.480 6.693 5.000 2.953 4.724
24-168 5 1/4 48.4 6.299 7.874 6.693 5.250 3.150 4.724
24-176 5 1/2 52.9 6.299 8.189 6.693 5.500 3.150 4.724
24-184 5 3/4 55.1 6.299 8.504 6.693 5.750 3.150 4.724
24-196 6 1/8 60.6 6.299 8.819 7.087 6.125 3.543 5.000
24-208 6 1/2 72.2 6.299 9.252 7.087 6.500 3.543 5.000
24-220 6 7/8 79.6 6.299 9.724 7.087 6.875 3.543 5.000
24-244 7 5/8 110.3 6.299 10.591 8.858 7.625 4.724 6.772
*Made in Sweden
ASME B107.2 Fed'I Spec. GGG-W-660a

2-1/2" Drive O-Rings and Retainer Pin

Product Weight For Use with
Number lbs. Description Sockets No.
24-961 0.02 4-1/2" I.D. O-Ring 24-088 to 24-152
24-962 0.03 5-1/2" I.D. O-Ring 24-172 to 24-256
24-963 0.05 4-1/2" Lg. Retainer Pin 24-088 to 24-256

2-1/2" Drive

5-34
 5
No. 5 Spline Drive

No. 5 Spline Drive Impact Sockets*

No.5 Spline Drive

A B C D E F
Product Opening Weight Drive Wrench Overall Bolt Wrench Length to
Number Inches lbs. End (in) End (in) Length (in) Clearance (in) Depth (in) Shoulder (in)
17-434 1-1/16 1.50 2.362 1.693 3.150 0.906 0.709 0.906
17-436 1-1/8 1.60 2.362 1.811 3.150 1.063 0.787 0.748
17-440 1-1/4 1.60 2.362 1.969 3.150 1.063 0.827 0.551
17-442 1-5/16 1.70 2.362 2.087 3.150 1.063 0.866 0.374
17-444 1-3/8 1.80 2.362 2.165 3.150 1.102 0.906 0.276
17-446 1-7/16 1.90 2.362 2.244 3.150 1.181 0.945 0.157
17-448 1-1/2 2.00 2.362 2.323 3.150 1.220 0.984 0.098
17-452 1-5/8 2.10 2.362 2.520 3.150 1.378 1.181 2.362
Impact and Power Sockets, Accessories and Sets

17-454 1-11/16 2.20 2.362 2.598 3.937 1.654 1.260 3.150

17-456 1-3/4 2.40 2.362 2.756 3.937 1.732 1.260 3.150
17-458 1-13/16 2.60 2.362 2.835 3.937 1.811 1.339 3.150
17-460 1-7/8 2.70 2.362 2.913 3.937 1.850 1.339 3.150
17-464 2 3.10 2.362 3.071 3.937 2.008 1.417 3.150
17-468 2-1/8 3.60 2.362 3.228 3.937 2.087 1.417 3.150
17-470 2-3/16 3.90 2.362 3.307 3.937 2.165 1.496 3.150
17-472 2-1/4 4.00 2.362 3.425 4.331 2.244 1.654 3.543
17-474 2-5/16 4.30 2.362 3.465 4.331 2.283 1.654 3.543
17-476 2-3/8 4.70 3.150 3.543 4.331 2.362 1.732 3.543
17-480 2-1/2 5.40 3.150 3.701 4.724 2.480 1.850 3.937
17-482 2-9/16 6.10 3.150 3.819 4.724 2.559 1.850 3.937
17-484 2-5/8 6.20 3.150 3.898 4.724 2.598 1.850 3.937
17-488 2-3/4 6.50 3.150 4.055 4.724 2.756 1.850 3.937
17-496 3 7.30 3.150 4.370 5.118 2.992 2.087 4.331
*Made in Sweden
ASME B107.2 Fed'I Spec. GGG-W-660a

No. 5 Spline Impact Extension*

Product Weight Drive End Overall
Number lbs. O.D. (in) Length (in)
17-592 3.50 2.362 7.000
*Made in Sweden
ASME B107.2 Fed'I Spec. GGG-W-660a

No. 5 Spline Impact Universal Joint*

Product Weight Drive End Overall
Number lbs. O.D. (in) Length (in) Rotation
17-596 2.80 2.362 7.087 25˚
*Made in Sweden
ASME B107.2 Fed'I Spec. GGG-W-660a

Impact Adapter #5F, 1"M*

Product Weight Drive End Overall
Number lbs. O.D. (in) Length (in)
17-598 1.90 2.362 3.500
*Made in Sweden
ASME B107.2 Fed'I Spec. GGG-W-660a

5-35 Always wear eye protection when near tools in use.

 INDUSTRIAL WRENCHES AND SETS 6
Ratcheting Combination Wrenches
ACCESS
Small head design allows Combination Wrenches
easier access in tight areas
Flex Head Combination Wrenches
STRENGTH
Double Open-End Wrenches
Closed head design on ratcheting
box end adds strength by reducing SPEED Double Box-End Wrenches, 15˚ and 45˚
dirt and debris infiltration Ratcheting makes
projects faster Open End Angle Wrenches
and easier
Tappet Wrenches
Pump Pattern Wrenches
ACCESS
Requires as little as Ratcheting Box Wrenches
5˚ ratcheting arc
Flarenut Wrenches
Adjustable Wrenches
Industrial Finish Wrenches
Structural And Construction Wrenches
Striking Wrenches
STRENGTH
Anti-slip notches in open end Spanner Wrenches
grip the flats of fasteners
STRENGTH Slugging Wrenches
providing up to 25% more torque
Forged, one-piece design for than conventional designs Pipe Tools
increased durability

SPEED ACCESS
Ratcheting box end with reversing 72-tooth precision machined steel insert creates a
lever speeds removal/installation short ratcheting arc, allowing fastener to be turned
of fasteners even in confined areas

SAFETY
Hex jaw design allows for more SAFETY
secure fit to fastener, reducing 70% wider handle for more
the chance of slippage comfort, reducing pressure
and lessening hand fatigue

ACCESS
Extra wide jaw capacity (6-12”” wrenches)
andard
opens up to 25% wider than standard
adjustable wrenches
 6
Ratcheting Wrench, Reversible

Set 28-900
7 Pc. Reversible Ratcheting Wrench Set
Approximate Weight, 2.50 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
28-812 3/8 28-820 5/8
28-814 7/16 28-822 11/16
28-816 1/2 28-824 3/4
28-818 9/16
Vinyl Roll
29-432
Industrial Wrenches and Sets

Set 28-901
7 Pc. Reversible Ratcheting Wrench Set
Packaged in a tray
Approximate Weight, 2.50 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
28-812 3/8 28-820 5/8
28-814 7/16 28-822 11/16
28-816 1/2 28-824 3/4
28-818 9/16

Set 54-950 METRIC

10 Pc. Reversible Ratcheting Wrench Set
Approximate Weight, 3.7 lbs. (1,656 g)

Product Opening, Product Opening,

Number mm Number mm
54-810 10 54-815 15
54-811 11 54-816 16
54-812 12 54-817 17
54-813 13 54-818 18
54-814 14 54-819 19

Vinyl Roll
5460901

6-1 Always wear eye protection when near tools in use.

 6
Ratcheting Wrench, Combination

Set 25-661
7 Pc. Combination Ratcheting Wrench Set
Approximate Weight, 2.60 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
25-812 3/8 25-820 5/8
25-814 7/16 25-822 11/16
25-816 1/2 25-824 3/4
25-818 9/16
Vinyl Roll
29-432

Set 25-662
7 Pc. Combination Ratcheting Wrench Set

Industrial Wrenches and Sets

Packaged in a tray
Approximate Weight, 2.60 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
25-812 3/8 25-820 5/8
25-814 7/16 25-822 11/16
25-816 1/2 25-824 3/4
25-818 9/16

Set 25-667
10 Pc. Combination Ratcheting Wrench Set
Approximate Weight, 2.90 lbs.

Product Opening, Product Opening,

Number Inches Number Inches
25-808 1/4 25-816 1/2
25-810 5/16 25-818 9/16
25-811 11/32 25-820 5/8
25-812 3/8 25-822 11/16
25-814 7/16 25-824 3/4

Vinyl Roll
29-451

Set 52-667 METRIC

10 Pc. Combination Ratcheting Wrench Set
Approximate Weight, 3.90 lbs. (1,746 g)

Product Opening, Product Opening,

Number mm Number mm
52-810 10 52-815 15
52-811 11 52-816 16
52-812 12 52-817 17
52-813 13 52-818 18
52-814 14 52-819 19

Vinyl Roll
29-452

6-2
 6
Ratcheting Wrench, Box

Set 27-609
7 Pc. 12 Point Full Polish Box Ratcheting Wrench Set
Approximate Weight, 2.20 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
27-510 3/8 27-514 5/8
27-511 7/16 27-515 11/16
27-512 1/2 27-516 3/4
27-513 9/16
Vinyl Roll
2760901

Set 54-609 METRIC

10 Pc. 12 Point Full Polish Box Ratcheting Wrench Set
Industrial Wrenches and Sets

Approximate Weight, 4.10 lbs. (1,860 g)

Product Opening, Product Opening,
Number mm Number mm
54-510 10 54-515 15
54-511 11 54-516 16
54-512 12 54-517 17
54-513 13 54-518 18
54-514 14 54-519 19
Vinyl Roll
5460901

Set 27-708
17 Pc. 12 Point Full Polish Box Ratcheting Wrench Set
Approximate Weight, 8.20 lbs.
Product Opening, Product Opening,
Number Inches Number mm
27-510 3/8 54-510 10
27-511 7/16 54-511 11
27-512 1/2 54-512 12
27-513 9/16 54-513 13
27-514 5/8 54-514 14
27-515 11/16 54-515 15
27-516 3/4 54-516 16
54-517 17
54-518 18
54-519 19
Vinyl Rolls
2760901, 5460901

Set 27-704
4 Pc. 12 Point Full Polish Box Ratcheting Wrench Set
Approximate Weight, 1.82 lbs.

Product Opening, Product Opening,

Number Inches Number Inches
27-517 13/16 27-519 15/16
27-518 7/8 27-520 1

Vinyl Roll
29-410

6-3 Always wear eye protection when near tools in use.

 6
Ratcheting Wrench, Box, Stubby

Set 54-504 METRIC

4 Pc. Box Ratcheting Wrench Set
Approximate Weight, 4.00 lbs. (1,814 g)

Product Opening, Product Opening,

Number mm Number mm
54-520 21 54-522 24
54-521 22 54-523 25

Vinyl Roll
29-410

Set 27-607
7 Pc. Stubby Ratcheting Wrench Set

Industrial Wrenches and Sets

Approximate Weight, 1.40 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
27-110 3/8 27-114 5/8
27-111 7/16 27-115 11/16
27-112 1/2 27-116 3/4
27-113 9/16
Vinyl Roll
29-430

Set 54-607 METRIC

10 Pc. Stubby Ratcheting Wrench Set
Approximate Weight, 2.20 lbs. (998 g)
Product Opening, Product Opening,
Number mm Number mm
54-110 10 54-115 15
54-111 11 54-116 16
54-112 12 54-117 17
54-113 13 54-118 18
54-114 14 54-119 19
Vinyl Roll
29-450

Reversible Ratcheting Wrench

A B1 B2 C1 C2
Product Opening, Weight, Overall Width Width Thickness Thickness
Number Inches lbs. Length (in) Open End (in) Box End (in) Open End (in) Box End (in)
28-810 5/16 0.13 5.787 0.694 0.656 0.191 0.256
28-812 3/8 0.16 6.732 0.798 0.778 0.201 0.303
28-814 7/16 0.16 7.323 0.970 0.850 0.220 0.323
28-816 1/2 0.23 8.228 1.065 0.969 0.248 0.339
28-818 9/16 0.28 8.701 1.195 1.043 0.276 0.370
28-820 5/8 0.44 9.567 1.350 1.212 0.287 0.406
28-822 11/16 0.47 10.157 1.394 1.252 0.307 0.421
28-824 3/4 0.54 11.063 1.572 1.341 0.343 0.441

6-4
 6
Ratcheting Wrench, Reversible & Combination

Reversible Ratcheting Wrench METRIC

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number mm g Length (mm) Open End (mm) Box End (mm) Open End (mm) Box End( mm)
54-808 8 59 147.0 17.6 16.7 4.9 6.5
54-809 9 67 155.7 18.8 19.6 4.9 7.8
54-810 10 73 171.0 20.3 19.8 5.1 7.3
54-811 11 86 186.0 24.6 21.4 5.6 7.7
54-812 12 100 197.0 25.4 22.6 6.0 8.2
54-813 13 114 209.0 27.1 24.0 6.3 8.6
54-814 14 141 221.0 30.4 26.0 7.0 9.4
54-815 15 186 233.0 31.9 27.6 7.1 9.4
54-816 16 199 243.0 34.2 28.8 7.3 9.9
Industrial Wrenches and Sets

54-817 17 213 258.0 34.9 30.6 7.8 10.3

54-818 18 254 269.0 35.4 31.8 8.1 10.7
54-819 19 268 281.0 39.9 32.6 8.7 11.2

Combination Ratcheting Wrench

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number Inches lbs. Length (in) Open End (in) Box End (in) Open End (in) Box End (in)
25-808 1/4 0.07 5.05 0.525 0.657 0.177 0.256
25-810 5/16 0.09 5.74 0.695 0.657 0.191 0.256
25-811 11/32 0.10 6.13 0.715 0.732 0.189 0.272
25-812 3/8 0.14 6.71 0.816 0.760 0.201 0.287
25-814 7/16 0.17 7.24 0.965 0.835 0.220 0.303
25-816 1/2 0.21 8.15 1.065 0.949 0.248 0.339
25-818 9/16 0.28 8.65 1.205 1.020 0.276 0.354
25-820 5/8 0.35 9.50 1.335 1.130 0.287 0.390
25-822 11/16 0.41 10.13 1.398 1.207 0.307 0.406
25-824 3/4 0.56 11.01 1.585 1.283 0.343 0.441

Combination Ratcheting Wrench METRIC

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number mm g Length (mm) Open End (mm) Box End (mm) Open End (mm) Box End( mm)
52-806 6 27 128.5 13.3 16.7 4.5 6.5
52-807 7 32 136.7 14.6 16.7 4.5 6.5
52-808 8 36 144.5 17.7 16.7 4.9 6.5
52-809 9 45 155.7 18.2 18.6 4.8 6.9
52-810 10 64 170.7 20.7 19.3 5.1 7.3
52-811 11 73 184.2 24.5 21.2 5.6 7.7
52-812 12 86 196.9 25.9 22.8 6.0 8.2
52-813 13 100 207.0 27.1 24.1 6.3 8.6
52-814 14 113 219.2 30.6 25.9 7.0 9.0
52-815 15 141 231.9 32.3 27.6 7.1 9.4
52-816 16 154 241.3 33.9 28.7 7.3 9.9
52-817 17 186 257.3 35.5 30.7 7.8 10.3
52-818 18 213 266.7 37.0 32.0 8.1 10.7
52-819 19 263 280.9 40.3 32.6 8.7 11.2

6-5 Always wear eye protection when near tools in use.

 6
Ratcheting Wrench, Box

Box Ratcheting Wrench

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number Inches lbs. Length (in) Open End (in) Box End (in) Open End (in) Box End (in)

27-508 5/16 0.07 5.770 0.657 0.500 0.256 0.232

27-509 11/32 0.10 6.260 0.732 0.551 0.272 0.228
27-510 3/8 0.13 6.730 0.760 0.630 0.287 0.272
27-511 7/16 0.20 7.300 0.835 0.717 0.303 0.272

Industrial Wrenches and Sets

27-512 1/2 0.20 8.580 0.949 0.807 0.339 0.303
27-513 9/16 0.35 9.230 1.020 0.886 0.354 0.327
27-514 5/8 0.44 10.530 1.130 0.992 0.390 0.370
27-515 11/16 0.45 11.280 1.207 1.063 0.406 0.378
27-516 3/4 0.70 12.640 1.283 1.142 0.441 0.425
27-517 13/16 0.70 13.390 1.579 1.260 0.512 0.461
27-518 7/8 0.77 14.230 1.579 1.339 0.512 0.461
27-519 15/16 1.00 15.140 1.827 1.437 0.571 0.484
27-520 1 1.09 16.040 1.827 1.516 0.571 0.520

Box Ratcheting Wrench METRIC

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number mm g Length (mm) Open End (mm) Box End (mm) Open End (mm) Box End( mm)
54-508 8 32 146.5 16.7 12.7 6.5 5.9
54-509 9 45 159.0 18.6 14.0 6.9 5.8
54-510 10 68 171.0 19.3 16.0 7.3 6.9
54-511 11 73 185.5 21.2 18.2 7.7 6.9
54-512 12 100 201.0 22.8 19.7 8.2 7.3
54-513 13 113 218.0 24.1 20.5 8.6 7.7
54-514 14 136 234.5 25.9 22.5 9.0 8.3
54-515 15 177 252.0 27.6 23.6 9.4 9.0
54-516 16 195 267.5 28.7 25.2 9.9 9.4
54-517 17 218 286.5 30.7 27.0 10.3 9.6
54-518 18 236 303.0 32.0 27.0 10.7 10.1
54-519 19 308 321.0 32.6 29.0 11.2 10.8
54-520 21 313 340.0 40.1 32.0 13.0 11.7
54-521 22 367 361.5 40.1 34.0 13.0 11.7
54-522 24 426 384.5 46.4 36.5 14.5 12.3
54-523 25 513 407.5 46.4 38.5 14.5 13.3

6-6
 6
Ratcheting Wrench, Stubby

Stubby Ratcheting Wrench

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number Inches lbs. Length (in) Open End (in) Box End (in) Open End (in) Box End (in)

27-110 3/8 0.08 3.819 0.816 0.756 0.193 0.287

27-111 7/16 0.10 4.075 0.965 0.833 0.205 0.303
27-112 1/2 0.12 4.370 1.065 0.949 0.242 0.339
27-113 9/16 0.16 4.606 1.205 1.008 0.252 0.354
27-114 5/8 0.22 4.902 1.335 1.122 0.285 0.390
Industrial Wrenches and Sets

27-115 11/16 0.23 5.118 1.398 1.185 0.303 0.406

27-116 3/4 0.30 5.433 1.585 1.285 0.339 0.441

Stubby Ratcheting Wrench METRIC

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number mm g Length (mm) Open End (mm) Box End (mm) Open End (mm) Box End( mm)
54-110 10 32 97.0 20.7 19.2 4.9 7.3
54-111 11 45 103.5 24.5 21.2 5.2 7.7
54-112 12 50 108.5 25.9 22.7 5.8 8.2
54-113 13 54 111.0 27.1 24.1 6.2 8.6
54-114 14 68 117.0 30.6 25.6 6.4 9.0
54-115 15 86 121.5 32.3 27.8 6.9 9.4
54-116 16 100 124.5 33.9 28.5 7.3 9.9
54-117 17 104 130.0 35.5 30.1 7.7 10.3
54-118 18 118 132.5 37.0 31.9 7.7 10.7
54-119 19 145 138.0 40.3 32.7 8.6 11.2

6-7 Always wear eye protection when near tools in use.

 6
Combination Wrenches

Set 25-675
11 Pc. 12 Point Full Polish Extra Long Combination
Wrench Set
Approximate Weight, 6.70 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
25-412 3/8 25-424 3/4
25-414 7/16 25-426 13/16
25-416 1/2 25-428 7/8
25-418 9/16 25-430 15/16
25-420 5/8 25-432 1
25-422 11/16

Vinyl Roll
29-458

Industrial Wrenches and Sets

Set 25-671
7 Pc. 12 Point Full Polish Extra Long Combination
Wrench Set
Approximate Weight, 2.60 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
25-412 3/8 25-420 5/8
25-414 7/16 25-422 11/16
25-416 1/2 25-424 3/4
25-418 9/16
Vinyl Roll
29-432

6-8
 6
Combination Wrenches

Set 25-657
31 Pc. 12 Point Full Polish Long Combination
Wrench Set
Approximate Weight, 126.00 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
25-210 5/16 25-244* 1-3/8
25-212 3/8 25-246* 1-7/16
25-214 7/16 25-248* 1-1/2
25-216 1/2 25-252* 1-5/8
25-218 9/16 25-254* 1-11/16
25-220 5/8 25-256* 1-3/4
25-222 11/16 25-258* 1-13/16
25-224 3/4 25-260* 1-7/8
25-226 13/16 25-264* 2
25-228 7/8 25-266* 2-1/16
Industrial Wrenches and Sets

25-230 15/16 25-268* 2-1/8

25-232 1 25-270* 2-3/16
25-234 1-1/16 25-272* 2-1/4
25-236 1-1/8 25-276* 2-3/8
25-240 1-1/4 25-280* 2-1/2
25-242* 1-5/16 * Satin Finish
Vinyl Roll
29-468

Set 25-655
26 Pc. 12 Point Full Polish Long Combination
Wrench Set
Approximate Weight, 59.02 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
25-208 1/4 25-234 1-1/16
25-210 5/16 25-236 1-1/8
25-212 3/8 25-240 1-1/4
25-214 7/16 25-242* 1-5/16
25-216 1/2 25-244* 1-3/8
25-218 9/16 25-246* 1-7/16
25-220 5/8 25-248* 1-1/2
25-222 11/16 25-252* 1-5/8
25-224 3/4 25-254* 1-11/16
25-226 13/16 25-256* 1-3/4
25-228 7/8 25-258* 1-13/16
25-230 15/16 25-260* 1-7/8
25-232 1 25-264* 2
* Satin Finish

6-9 Always wear eye protection when near tools in use.

 6
Combination Wrenches

Set 25-652
22 Pc. 12 Point Full Polish Long Combination
Wrench Set
Approximate Weight, 23.38 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
25-208 1/4 25-230 15/16
25-210 5/16 25-232 1
25-212 3/8 25-234 1-1/16
25-214 7/16 25-236 1-1/8
25-216 1/2 25-238 1-3/16
25-218 9/16 25-240 1-1/4
25-220 5/8 25-242* 1-5/16
25-222 11/16 25-244* 1-3/8
25-224 3/4 25-246* 1-7/16
25-226 13/16 25-248* 1-1/2

Industrial Wrenches and Sets

25-228 7/8 25-252* 1-5/8
* Satin Finish

Set 25-642
15 Pc. 12 Point Full Polish Long Combination
Wrench Set
Approximate Weight, 10.39 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
25-210 5/16 25-226 13/16
25-212 3/8 25-228 7/8
25-214 7/16 25-230 15/16
25-216 1/2 25-232 1
25-218 9/16 25-234 1-1/16
25-220 5/8 25-236 1-1/8
25-222 11/16 25-240 1-1/4
25-224 3/4
Vinyl Roll
29-468

6-10
 6
Combination Wrenches

Set 25-637
10 Pc. 12 Point Full Polish Long Combination
Wrench Set
Approximate Weight, 5.40 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
25-214 7/16 25-224 3/4
25-216 1/2 25-226 13/16
25-218 9/16 25-228 7/8
25-220 5/8 25-230 15/16
25-222 11/16 25-232 1
Vinyl Roll
29-452
Industrial Wrenches and Sets

Set 25-631
7 Pc. 12 Point Full Polish Long Combination
Wrench Set
Approximate Weight, 1.87 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
25-212 3/8 25-220 5/8
25-214 7/16 25-222 11/16
25-216 1/2 25-224 3/4
25-218 9/16
Vinyl Roll
29-432

Set 25-626
10 Pc. 6 Point Full Polish Long Combination
Wrench Set
Approximate Weight, 3.64 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
25-314 7/16 25-324 3/4
25-316 1/2 25-326 13/16
25-318 9/16 25-328 7/8
25-320 5/8 25-330 15/16
25-322 11/16 25-332 1
Vinyl Roll
29-452

6-11 Always wear eye protection when near tools in use.

 6
Combination Wrenches

Set 52-671 METRIC

10 Pc. 12 Point Full Polish Extra Long Combination
Wrench Set
Approximate Weight, 5.50 lbs. (2,497 g)
Product Opening, Product Opening,
Number mm Number mm
52-410 10 52-416 16
52-411 11 52-417 17
52-412 12 52-418 18
52-413 13 52-419 19
52-414 14
52-415 15
Vinyl Roll
29-452

Industrial Wrenches and Sets

Set 52-644 METRIC
26 Pc. 12 Point Full Polish Long Combination
Wrench Set
Approximate Weight, 16.10 lbs. (7,321 g)
Product Opening, Product Opening,
Number mm Number mm
52-206 6 52-219 19
52-207 7 52-220 20
52-208 8 52-221 21
52-209 9 52-222 22
52-210 10 52-223 23
52-211 11 52-224 24
52-212 12 52-225 25
52-213 13 52-226 26
52-214 14 52-227 27
52-215 15 52-228 28
52-216 16 52-229 29
52-217 17 52-230 30
52-218 18 52-232 32

6-12
 6
Combination Wrenches

Set 52-638 METRIC

18 Pc. 12 Point Full Polish Long Combination
Wrench Set
Approximate Weight, 7.20 lbs. (3,296 g)

Product Opening, Product Opening,

Number mm Number mm
52-207 7 52-216 16
52-208 8 52-217 17
52-209 9 52-218 18
52-210 10 52-219 19
52-211 11 52-220 20
52-212 12 52-221 21
52-213 13 52-222 22
52-214 14 52-223 23
52-215 15 52-224 24
Industrial Wrenches and Sets

Vinyl Roll
29-470

Set 52-634 METRIC

15 Pc. 12 Point Full Polish Long Combination
Wrench Set
Approximate Weight, 6.20 lbs. (2,828 g)
Product Opening, Product Opening,
Number mm Number mm
52-207 7 52-215 15
52-208 8 52-216 16
52-209 9 52-217 17
52-210 10 52-218 18
52-211 11 52-219 19
52-212 12 52-220 20
52-213 13 52-221 21
52-214 14
Vinyl Roll
29-468

6-13 Always wear eye protection when near tools in use.

 6
Combination Wrenches

Set 52-632 METRIC

15 Pc. 12 Point Full Polish Long Combination
Wrench Set
Approximate Weight, 7.30 lbs. (3,296 g)
Product Opening, Product Opening,
Number mm Number mm
52-207 7 52-222 22
52-208 8 52-224 24
52-210 10 52-226 26
52-212 12 52-228 28
52-214 14 52-229 29
52-216 16 52-230 30
52-218 18 52-232 32
52-220 20
Vinyl Roll
29-468

Industrial Wrenches and Sets

Set 52-631 METRIC
10 Pc. 12 Point Full Polish Long Combination
Wrench Set
Approximate Weight, 3.00 lbs. (1,344 g)

Product Opening, Product Opening,

Number mm Number mm
52-210 10 52-215 15
52-211 11 52-216 16
52-212 12 52-217 17
52-213 13 52-218 18
52-214 14 52-219 19
Vinyl Roll
29-452

Set 52-630 METRIC

9 Pc. 12 Point Full Polish Long Combination
Wrench Set
Approximate Weight, 2.70 lbs. (1,235 g)
Product Opening, Product Opening,
Number mm Number mm
52-207 7 52-212 12
52-208 8 52-213 13
52-209 9 52-214 14
52-210 10 52-215 15
52-211 11
Vinyl Roll
29-448

6-14
 6
Combination Wrenches

Set 52-627 METRIC

14 Pc. 6 Point Full Polish Long Combination
Wrench Set
Approximate Weight, 3.10 lbs. (1,403 g)
Product Opening, Product Opening,
Number mm Number mm
52-306 6 52-313 13
52-307 7 52-314 14
52-308 8 52-315 15
52-309 9 52-316 16
52-310 10 52-317 17
52-311 11 52-318 18
52-312 12 52-319 19
Vinyl Roll
29-466
Industrial Wrenches and Sets

Set 52-623 METRIC

10 Pc. 6 Point Full Polish Long Combination
Wrench Set
Approximate Weight, 3.00 lbs. (1,344 g)

Product Opening, Product Opening,

Number mm Number mm
52-310 10 52-315 15
52-311 11 52-316 16
52-312 12 52-317 17
52-313 13 52-318 18
52-314 14 52-319 19
Vinyl Roll
29-452

6-15 Always wear eye protection when near tools in use.

 6
Combination Wrenches

Set 25-689
31 Pc. 12 Point Satin Finish Long Combination
Wrench Set
Approximate Weight, 126.00 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
25-460 5/16 25-244 1-3/8
25-462 3/8 25-246 1-7/16
25-464 7/16 25-248 1-1/2
25-466 1/2 25-252 1-5/8
25-468 9/16 25-254 1-11/16
25-470 5/8 25-256 1-3/4
25-472 11/16 25-258 1-13/16
25-474 3/4 25-260 1-7/8
25-476 13/16 25-264 2
25-478 7/8 25-266 2-1/16

Industrial Wrenches and Sets

25-480 15/16 25-268 2-1/8
25-482 1 25-270 2-3/16
25-484 1-1/16 25-272 2-1/4
25-486 1-1/8 25-276 2-3/8
25-490 1-1/4 25-280 2-1/2
25-242 1-5/16
Vinyl Roll
29-468

Set 25-685
26 Pc. 12 Point Satin Finish Long Combination
Wrench Set
Approximate Weight, 59.02 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
25-458 1/4 25-484 1-1/16
25-460 5/16 25-486 1-1/8
25-462 3/8 25-490 1-1/4
25-464 7/16 25-242 1-5/16
25-466 1/2 25-244 1-3/8
25-468 9/16 25-246 1-7/16
25-470 5/8 25-248 1-1/2
25-472 11/16 25-252 1-5/8
25-474 3/4 25-254 1-11/16
25-476 13/16 25-256 1-3/4
25-478 7/8 25-258 1-13/16
25-480 15/16 25-260 1-7/8
25-482 1 25-264 2

6-16
 6
Combination Wrenches

Set 25-682
22 Pc. 12 Point Satin Finish Long Combination
Wrench Set
Approximate Weight, 23.38 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
25-458 1/4 25-480 15/16
25-460 5/16 25-482 1
25-462 3/8 25-484 1-1/16
25-464 7/16 25-486 1-1/8
25-466 1/2 25-488 1-3/16
25-468 9/16 25-490 1-1/4
25-470 5/8 25-242 1-5/16
25-472 11/16 25-244 1-3/8
25-474 3/4 25-246 1-7/16
25-476 13/16 25-248 1-1/2
Industrial Wrenches and Sets

25-478 7/8 25-252 1-5/8

Set 25-658
16 Pc. 12 Point Satin Finish Long Combination
Wrench Set
Approximate Weight, 99.50 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
25-242 1-5/16 25-260 1-7/8
25-244 1-3/8 25-264 2
25-246 1-7/16 25-266 2-1/16
25-248 1-1/2 25-268 2-1/8
25-252 1-5/8 25-270 2-3/16
25-254 1-11/16 25-272 2-1/4
25-256 1-3/4 25-276 2-3/8
25-258 1-13/16 25-280 2-1/2

6-17 Always wear eye protection when near tools in use.

 6
Combination Wrenches

Set 25-681
15 Pc. 12 Point Satin Finish Long Combination
Wrench Set
Approximate Weight, 10.39 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
25-460 5/16 25-476 13/16
25-462 3/8 25-478 7/8
25-464 7/16 25-480 15/16
25-466 1/2 25-482 1
25-468 9/16 25-484 1-1/16
25-470 5/8 25-486 1-1/8
25-472 11/16 25-490 1-1/4
25-474 3/4

Vinyl Roll

Industrial Wrenches and Sets

29-468

Set 25-680
10 Pc. 12 Point Satin Finish Long Combination
Wrench Set
Approximate Weight, 5.40 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
25-464 7/16 25-474 3/4
25-466 1/2 25-476 13/16
25-468 9/16 25-478 7/8
25-470 5/8 25-480 15/16
25-472 11/16 25-482 1
Vinyl Roll
29-452

Set 25-677
7 Pc. 12 Point Satin Finish Long Combination
Wrench Set
Approximate Weight, 1.87 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
25-462 3/8 25-470 5/8
25-464 7/16 25-472 11/16
25-466 1/2 25-474 3/4
25-468 9/16
Vinyl Roll
29-432

6-18
 6
Combination Wrenches

Set 52-686 METRIC

18 Pc. 12 Point Satin Finish Long Combination
Wrench Set
Approximate Weight, 7.30 lbs. (3,296 g)

Product Opening, Product Opening,

Number mm Number mm
52-457 7 52-466 16
52-458 8 52-467 17
52-459 9 52-468 18
52-460 10 52-469 19
52-461 11 52-470 20
52-462 12 52-471 21
52-463 13 52-472 22
52-464 14 52-473 23
52-465 15 52-474 24
Industrial Wrenches and Sets

Vinyl Roll
29-470

Set 52-684 METRIC

15 Pc. 12 Point Satin Finish Long Combination
Wrench Set
Approximate Weight, 7.30 lbs. (3,296 g)
Product Opening, Product Opening,
Number mm Number mm
52-457 7 52-465 15
52-458 8 52-466 16
52-459 9 52-467 17
52-460 10 52-468 18
52-461 11 52-469 19
52-462 12 52-470 20
52-463 13 52-471 21
52-464 14
Vinyl Roll
29-468

Set 52-682 METRIC

15 Pc. 12 Point Satin Finish Long Combination
Wrench Set
Approximate Weight, 7.26 lbs. (3,296 g)
Product Opening, Product Opening,
Number mm Number mm
52-457 7 52-472 22
52-458 8 52-474 24
52-460 10 52-476 26
52-462 12 52-478 28
52-464 14 52-479 29
52-466 16 52-480 30
52-468 18 52-482 32
52-470 20
Vinyl Roll
29-468

6-19 Always wear eye protection when near tools in use.

 6
Combination Wrenches

Set 52-677 METRIC

10 Pc. 12 Point Satin Finish Long Combination
Wrench Set
Approximate Weight, 3.00 lbs. (1,344 g)
Product Opening, Product Opening,
Number mm Number mm
52-460 10 52-465 15
52-461 11 52-466 16
52-462 12 52-467 17
52-463 13 52-468 18
52-464 14 52-469 19

Vinyl Roll
29-452

Industrial Wrenches and Sets

Set 52-679 METRIC
9 Pc. 12 Point Satin Finish Long Combination
Wrench Set
Approximate Weight, 3.00 lbs. (1,344 g)
Product Opening, Product Opening,
Number mm Number mm
52-457 7 52-462 12
52-458 8 52-463 13
52-459 9 52-464 14
52-460 10 52-465 15
52-461 11
Vinyl Roll
29-448

6-20
 6
Combination Wrenches

Set 30-644
15 Pc. 12 Point Black Oxide Long Combination
Wrench Set
Approximate Weight, 10.39 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
30-210 5/16 30-226 13/16
30-212 3/8 30-228 7/8
30-214 7/16 30-230 15/16
30-216 1/2 30-232 1
30-218 9/16 30-234 1-1/16
30-220 5/8 30-236 1-1/8
30-222 11/16 30-240 1-1/4
30-224 3/4
Vinyl Roll
Industrial Wrenches and Sets

29-468

Set 30-636
10 Pc. 12 Point Black Oxide Long Combination
Wrench Set
Approximate Weight, 5.40 lbs.

Product Opening, Product Opening,

Number Inches Number Inches
30-214 7/16 30-224 3/4
30-216 1/2 30-226 13/16
30-218 9/16 30-228 7/8
30-220 5/8 30-230 15/16
30-222 11/16 30-232 1
Vinyl Roll
29-452

6-21 Always wear eye protection when near tools in use.

 6
Combination Wrenches

Set 30-631
7 Pc. 12 Point Black Oxide Long Combination
Wrench Set
Approximate Weight, 1.87 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
30-212 3/8 30-220 5/8
30-214 7/16 30-222 11/16
30-216 1/2 30-224 3/4
30-218 9/16
Vinyl Roll
29-432

Industrial Wrenches and Sets

56-628 METRIC
15 Pc. 12 Point Black Oxide Long Combination
Wrench Set
Approximate Weight, 10.80 lbs. (4,916 g)
Product Opening, Product Opening,
Number mm Number mm
56-210 10 56-218 18
56-211 11 56-219 19
56-212 12 56-220 20
56-213 13 56-221 21
56-214 14 56-222 22
56-215 15 56-223 23
56-216 16 56-224 24
56-217 17
Vinyl Roll
29-468

6-22
 6
Combination Wrenches

Set 25-616
14 Pc. 12 Point Full Polish Regular Length
Combination Wrench Set
Approximate Weight, 9.15 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
25-112 3/8 25-126 13/16
25-114 7/16 25-128 7/8
25-116 1/2 25-130 15/16
25-118 9/16 25-132 1
25-120 5/8 25-234 1 1/16
25-122 11/16 25-236 1 1/8
25-124 3/4 25-240 1 1/4
Vinyl Roll
52-619
Industrial Wrenches and Sets

Set 25-613
13 Pc. 12 Point Full Polish Regular Length
Combination Wrench Set
Approximate Weight, 3.96 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
25-108 1/4 25-122 11/16
25-110 5/16 25-124 3/4
25-112 3/8 25-126 13/16
25-114 7/16 25-128 7/8
25-116 1/2 25-130 15/16
25-118 9/16 25-132 1
25-120 5/8
Vinyl Roll
29-462

Set 25-609
7 Pc. 12 Point Full Polish Regular Length
Combination Wrench Set
Approximate Weight, 1.29 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
25-112 3/8 25-120 5/8
25-114 7/16 25-122 11/16
25-116 1/2 25-124 3/4
25-118 9/16
Vinyl Roll
29-430

6-23 Always wear eye protection when near tools in use.

 6
Combination Wrenches

Set 25-605
7 Pc. 12 Point Full Polish Extra Short Combination
Wrench Set
Approximate Weight, 1.10 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
25-162 3/8 25-170 5/8
25-164 7/16 25-172 11/16
25-166 1/2 25-174 3/4
25-168 9/16
Vinyl Roll
29-430

Industrial Wrenches and Sets

Set 25-600
10 Pc. 12 Point Full Polish Midget Combination
Wrench Set
Available as a set only. Packaged in a pouch.
Approximate Weight, 0.24 lbs.
Opening, Opening,
Inches Inches
5/32 6 Pt 1/4 12 Pt
3/16 6 Pt 9/32 12 Pt
13/64 6 Pt 5/16 12 Pt
7/32 12 Pt 3/8 12 Pt
15/64 12 Pt 7/16 12 Pt

Set 25-602
8 Pc. 6 & 12 Point Full Polish Regular Length
Combination Wrench Set
Approximate Weight, 0.38 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
25-004 1/8 25-109 9/32*
25-005 5/32 25-110 5/16*
25-006 3/16 25-111 11/32*
25-008 1/4 25-112 3/8*
Vinyl Roll
29-438

* 12 Point

6-24
 6
Combination Wrenches

Set 52-619 METRIC

14 Pc. 12 Point Full Polish Regular Length
Combination Wrench Set
Approximate Weight, 2.10 lbs. (958 g)
Product Opening, Product Opening,
Number mm Number mm
52-006 6 52-113 13
52-007 7 52-114 14
52-008 8 52-115 15
52-109 9 52-116 16
52-110 10 52-117 17
52-111 11 52-118 18
52-112 12 52-119 19
Vinyl Roll
29-466
Industrial Wrenches and Sets

Set 52-605 METRIC

10 Pc. 12 Point Full Polish Extra Short Combination
Wrench Set
Approximate Weight, 1.50 lbs. (702 g)
Product Opening, Product Opening,
Number mm Number mm
52-160 10 52-165 15
52-161 11 52-166 16
52-162 12 52-167 17
52-163 13 52-168 18
52-164 14 52-169 19
Vinyl Roll
29-450

Set 52-601 METRIC

7 Pc. 6 Point Full Polish Regular Length
Combination Wrench Set
Approximate Weight, 0.20 lbs. (100 g)
Product Opening, Product Opening,
Number mm Number mm
52-004 4 52-007 7
52-005 5 52-008 8
52-083 5.5 52-109* 9
52-006 6 *12 Point

Vinyl Roll
29-434

Set 52-600 METRIC

10 Pc. 6 & 12 Point Full Polish Midget Combination
Wrench Set
Available as a set only. Packaged in pouch.
Approximate Weight, 0.30 lbs. (117 g)
Opening, Opening,
mm mm
4 6 Pt 7 12 Pt
4.5 6 Pt 8 12 Pt
5 6 Pt 9 12 Pt
5.5 12 Pt 10 12 Pt
6 12 Pt 11 12 Pt

6-25 Always wear eye protection when near tools in use.

 6
Combination Wrenches

Set 25-607
14 Pc. 12 Point Satin Finish Regular Length
Combination Wrench Set
Approximate Weight, 3.18 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
30-312 3/8 30-326 13/16
30-314 7/16 30-328 7/8
30-316 1/2 30-330 15/16
30-318 9/16 30-332 1
30-320 5/8 25-484 1 1/16
30-322 11/16 25-486 1 1/8
30-324 3/4 25-490 1 1/4
Vinyl Roll
52-619

Industrial Wrenches and Sets

Set 25-608
11 Pc. 12 Point Satin Finish Regular Length
Combination Wrench Set
Approximate Weight, 2.00 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
30-312 3/8 30-324 3/4
30-314 7/16 30-326 13/16
30-316 1/2 30-328 7/8
30-318 9/16 30-330 15/16
30-320 5/8 30-332 1
30-322 11/16
Vinyl Roll
25-458

Set 25-611
9 Pc. 12 Point Satin Finish Regular Length
Combination Wrench Set
Approximate Weight, 1.25 lbs.

Product Opening, Product Opening,

Number Inches Number Inches
30-308 1/4 30-318 9/16
30-310 5/16 30-320 5/8
30-312 3/8 30-322 11/16
30-314 7/16 30-324 3/4
30-316 1/2
Vinyl Roll
52-679

6-26
 6
Combination Wrenches

Set 52-602 METRIC

15 Pc. 12 Point Satin Finish Regular Length
Combination Wrench Set
Approximate Weight, 5.50 lbs. (2,495 g)
Product Opening, Product Opening,
Number mm Number mm
56-407 7 56-415 15
56-408 8 56-416 16
56-409 9 56-417 17
56-410 10 56-418 18
56-411 11 56-419 19
56-412 12 56-421 21
56-413 13 56-422 22
56-414 14
Vinyl Roll
Industrial Wrenches and Sets

52-628

Set 52-606 METRIC

11 Pc. 12 Point Satin Finish Regular Length
Combination Wrench Set
Approximate Weight, 3.50 lbs. (1,588 g)
Product Opening, Product Opening,
Number mm Number mm
56-407 7 56-413 13
56-408 8 56-414 14
56-409 9 56-415 15
56-410 10 56-417 17
56-411 11 56-419 19
56-412 12
Vinyl Roll
29-458

6-27 Always wear eye protection when near tools in use.

 6
Combination Wrenches

Set 30-607
14 Pc. 12 Point Black Oxide Regular Length
Combination Wrench Set
Approximate Weight, 5.00 lbs. 2,268 g)

Product Opening, Product Opening,

Number Inches Number Inches
30-112 3/8 30-126 13/16
30-114 7/16 30-128 7/8
30-116 1/2 30-130 15/16
30-118 9/16 30-132 1
30-120 5/8 30-234 1-1/16
30-122 11/16 30-236 1-1/8
30-124 3/4 30-240 1-1/4

Vinyl Roll

Industrial Wrenches and Sets

52-619A

Set 30-608
11 Pc. 12 Point Black Oxide Regular Length
Combination Wrench Set
Approximate Weight, 3.50 lbs. (1,588 g)
Product Opening, Product Opening,
Number Inches Number Inches
30-112 3/8 30-124 3/4
30-114 7/16 30-126 13/16
30-116 1/2 30-128 7/8
30-118 9/16 30-130 15/16
30-120 5/8 30-132 1
30-122 11/16
Vinyl Roll
29-458

Set 56-611 METRIC

11 Pc. 12 Point Black Oxide Regular Length
Combination Wrench Set
Approximate Weight, 3.50 lbs. (1,588 g)
Product Opening, Product Opening,
Number mm Number mm
56-307 7 56-313 13
56-308 8 56-314 14
56-309 9 56-315 15
56-310 10 56-317 17
56-311 11 56-319 19
56-312 12
Vinyl Roll
29-458

6-28
 6
Flex Head Wrenches

Set 25-696
11 Pc. 12 Point Full Polish Flex Head
Wrench Set
Approximate Weight, 5.15 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
25-508 1/4 25-520 5/8
25-510 5/16 25-522 11/16
25-512 3/8 25-524 3/4
25-514 7/16 25-526 13/16
25-516 1/2 25-528 7/8
25-518 9/16
Vinyl Roll
29-458
Industrial Wrenches and Sets

Set 25-694
7 Pc. 12 Point Full Polish Flex Head
Wrench Set
Approximate Weight, 3.04 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
25-512 3/8 25-520 5/8
25-514 7/16 25-522 11/16
25-516 1/2 25-524 3/4
25-518 9/16
Vinyl Roll
29-432

Set 25-692
4 Pc. 12 Point Full Polish Flex Head
Wrench Set
Approximate Weight, 1.82 lbs.

Product Opening, Product Opening,

Number Inches Number Inches
25-514 7/16 25-518 9/16
25-516 1/2 25-520 5/8

Vinyl Roll
29-416

6-29 Always wear eye protection when near tools in use.

 6
Combination Wrenches

12 Point Full Polish Extra Long Combination Wrench

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number Inches lbs. Length (in) Open End (in) Box End (in) Open End (in) Box End (in)
25-412 3/8 0.16 7.380 0.840 0.620 0.200 0.270
25-414 7/16 0.18 8.000 0.950 0.670 0.210 0.290
25-416 1/2 0.22 8.810 1.040 0.740 0.240 0.330
25-418 9/16 0.33 10.000 1.180 0.840 0.260 0.350

Industrial Wrenches and Sets

25-420 5/8 0.45 11.130 1.310 0.940 0.280 0.410
25-422 11/16 0.48 12.000 1.430 1.010 0.310 0.440
25-424 3/4 0.71 13.130 1.560 1.100 0.340 0.480
25-426 13/16 0.82 14.000 1.660 1.190 0.350 0.520
25-428 7/8 0.88 15.000 1.810 1.280 0.370 0.550
25-430 15/16 1.12 16.000 1.920 1.360 0.390 0.590
25-432 1 1.26 17.000 2.050 1.450 0.410 0.620
ASME B107.6 Fed’I Spec. GGG-W-636e

6-30
 6
Combination Wrenches

12 Point Full Polish Long Combination Wrench

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number Inches lbs. Length (in) Open End (in) Box End (in) Open End (in) Box End (in)
25-208 1/4 0.05 5.000 0.550 0.390 0.140 0.190
25-210 5/16 0.07 5.750 0.670 0.490 0.170 0.230
25-211 11/32 0.07 5.750 0.670 0.490 0.170 0.230
25-212 3/8 0.09 6.500 0.790 0.560 0.190 0.250
25-214 7/16 0.14 7.250 0.950 0.670 0.210 0.290
Industrial Wrenches and Sets

25-216 1/2 0.19 8.000 1.040 0.760 0.240 0.330

25-218 9/16 0.23 8.750 1.180 0.840 0.260 0.350
25-220 5/8 0.25 9.500 1.310 0.940 0.280 0.410
25-222 11/16 0.34 10.250 1.430 1.010 0.310 0.440
25-224 3/4 0.43 11.000 1.560 1.100 0.340 0.480
25-226 13/16 0.65 11.750 1.660 1.190 0.350 0.520
25-228 7/8 0.66 12.500 1.810 1.280 0.370 0.550
25-230 15/16 0.91 13.250 1.920 1.360 0.390 0.590
25-232 1 1.02 14.000 2.050 1.450 0.410 0.620
25-234 1-1/16 1.23 14.750 2.200 1.550 0.440 0.650
25-236 1-1/8 1.31 15.500 2.280 1.620 0.470 0.680
25-238 1-3/16 1.52 16.310 2.420 1.720 0.490 0.730
25-240 1-1/4 1.76 17.060 2.570 1.820 0.510 0.740
*25-242 1-5/16 2.31 20.125 2.703 2.000 0.500 0.844
*25-244 1-3/8 2.15 20.125 2.875 2.062 0.500 0.875
*25-246 1-7/16 2.55 21.125 3.000 2.187 0.750 0.937
*25-248 1-1/2 2.43 21.125 3.062 2.187 0.625 0.906
*25-252 1-5/8 3.10 24.125 3.500 2.437 0.640 0.969
*25-254 1-11/16 3.26 24.125 3.500 2.437 0.675 0.969
*25-256 1-3/4 5.05 25.625 3.687 2.750 0.760 1.109
*25-258 1-13/16 6.10 25.625 3.687 2.750 0.781 1.062
*25-260 1-7/8 6.00 27.125 4.062 2.937 0.750 1.125
*25-264 2 5.94 27.125 4.062 2.937 0.750 1.125
*25-266 2-1/16 5.75 27.125 4.000 2.875 0.750 1.062
*25-268 2-1/8 9.00 28.000 4.406 3.250 0.844 1.125
*25-270 2-3/16 9.31 28.000 4.406 3.250 0.844 1.125
*25-272 2-1/4 9.12 28.000 4.406 3.250 0.844 1.125
*25-276 2-3/8 13.61 30.000 5.031 3.750 0.938 1.375
*25-280 2-1/2 13.89 30.000 5.031 3.750 0.938 1.375
*25-282 2-9/16 14.40 32.000 5.562 4.187 1.000 1.500
*25-284 2-5/8 14.50 32.000 5.562 4.187 1.000 1.500
*25-288 2-3/4 14.60 32.000 5.562 4.187 1.000 1.500
ASME B107.6 Fed’I Spec. GGG-W-636e
*Satin Finish

6-31 Always wear eye protection when near tools in use.

 6
Combination Wrenches

6 Point Full Polish Long Combination Wrench

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number Inches lbs. Length (in) Open End (in) Box End (in) Open End (in) Box End (in)
25-308 1/4 0.05 5.000 0.550 0.390 0.140 0.190
25-310 5/16 0.07 5.750 0.670 0.490 0.170 0.230
25-312 3/8 0.09 6.500 0.790 0.560 0.190 0.250
25-314 7/16 0.14 7.250 0.950 0.670 0.210 0.290
25-316 1/2 0.19 8.000 1.040 0.760 0.240 0.330
25-318 9/16 0.23 8.750 1.180 0.840 0.260 0.350

Industrial Wrenches and Sets

25-320 5/8 0.25 9.500 1.310 0.940 0.280 0.410
25-322 11/16 0.34 10.250 1.430 1.010 0.310 0.440
25-324 3/4 0.43 11.000 1.560 1.100 0.340 0.480
25-326 13/16 0.65 11.750 1.660 1.190 0.350 0.520
25-328 7/8 0.66 12.500 1.810 1.280 0.370 0.550
25-330 15/16 0.91 13.250 1.920 1.360 0.390 0.590
25-332 1 1.02 14.000 2.050 1.450 0.410 0.620

12 Point Full Polish Extra Long Combination Wrench METRIC

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number mm g Length (mm) Open End (mm) Box End (mm) Open End (mm) Box End( mm)
52-410 10 73 187.5 21.3 15.7 5.1 6.9
52-411 11 82 203.2 24.1 17.0 5.3 7.4
52-412 12 100 223.8 26.4 18.8 6.1 8.4
52-413 13 109 238.3 28.2 20.3 6.4 8.6
52-414 14 150 254.0 30.0 21.3 6.6 8.9
52-415 15 172 268.2 31.8 22.6 6.9 9.7
52-416 16 204 282.7 33.3 23.9 7.1 10.4
52-417 17 218 304.8 36.3 25.7 7.9 11.2
52-418 18 227 319.0 38.1 26.9 8.4 11.7
52-419 19 322 333.5 39.6 27.9 8.6 12.2
52-420 20 372 355.6 42.2 30.2 8.9 13.2
52-421 21 399 381.0 46.0 32.5 9.4 14.0
ASME B107.9m

6-32
 6
Combination Wrenches

12 Point Full Polish Long Combination Wrench METRIC

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number mm g Length (mm) Open End (mm) Box End (mm) Open End (mm) Box End( mm)
52-206 6 23 127.0 15.9 11.1 4.0 5.6
52-207 7 23 135.0 15.9 11.1 4.0 5.6
52-208 8 32 127.0 15.9 11.1 4.0 5.6
52-209 9 41 155.7 18.5 13.0 4.3 6.1
52-210 10 41 170.9 21.3 15.7 5.1 6.9
52-211 11 64 184.2 24.1 17.0 5.3 7.4
52-212 12 91 195.1 25.4 18.3 5.8 7.9
Industrial Wrenches and Sets

52-213 13 86 207.0 26.4 19.3 6.1 8.4

52-214 14 104 218.9 30.0 21.3 6.6 8.9
52-215 15 114 230.9 31.8 22.6 6.9 9.7
52-216 16 114 241.3 33.3 23.9 7.1 10.4
52-217 17 159 256.0 34.8 24.9 7.4 10.9
52-218 18 154 267.0 36.3 25.7 7.9 11.2
52-219 19 195 279.4 39.6 27.9 8.6 12.2
52-220 20 274 292.1 41.7 29.0 8.6 12.7
52-221 21 299 304.0 43.7 31.0 9.1 13.7
52-222 22 299 317.5 46.0 32.5 9.4 14.0
52-223 23 418 327.9 48.0 33.5 9.7 14.5
52-224 24 413 338.1 50.0 35.3 9.9 15.0
52-225 25 480 355.6 52.1 36.8 10.4 15.7
52-226 26 567 374.7 55.9 39.4 11.2 16.5
52-227 27 558 374.7 55.9 39.4 11.2 16.5
52-228 28 601 393.7 57.9 41.1 11.9 17.3
52-229 29 592 393.7 57.9 41.1 11.9 17.3
52-230 30 590 414.3 61.5 43.7 12.4 18.5
52-232 32 803 433.3 65.3 46.2 12.6 18.8
52-236* 36 1016 511.2 76.2 55.5 15.9 23.8
52-241* 41 1439 612.8 88.9 61.9 16.3 24.6
52-246* 46 2633 650.9 93.6 69.9 19.1 28.2
52-250* 50 2690 689.0 103.2 74.6 19.1 28.6
52-255* 55 4309 711.2 111.9 82.6 21.4 28.6
52-260* 60 6237 762.0 127.8 95.3 23.8 34.9
52-265* 65 6622 812.8 141.3 106.3 25.4 38.1
52-270* 70 6577 812.8 141.3 106.3 25.4 38.1
ASME B107.9m *Satin Finish

6-33 Always wear eye protection when near tools in use.

 6
Combination Wrenches

6 Point Full Polish Long Combination Wrench METRIC

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number mm g Length (mm) Open End (mm) Box End (mm) Open End (mm) Box End( mm)
52-306 6 23 127.0 15.9 11.1 4.0 5.6
52-307 7 23 127.0 15.9 11.1 4.0 5.6
52-308 8 32 146.0 15.9 11.1 4.0 5.6
52-309 9 41 155.7 18.5 13.0 4.3 6.1
52-310 10 41 170.9 21.3 15.7 5.1 6.9
52-311 11 64 184.2 24.1 17.0 5.3 7.4

Industrial Wrenches and Sets

52-312 12 91 195.1 25.4 18.3 5.8 7.9
52-313 13 86 207.0 26.4 19.3 6.1 8.4
52-314 14 104 218.9 30.0 21.3 6.6 8.9
52-315 15 114 230.9 31.8 22.6 6.9 9.7
52-316 16 114 241.3 33.3 23.9 7.1 10.4
52-317 17 159 256.0 34.8 24.9 7.4 10.9
52-318 18 154 267.0 36.3 25.7 7.9 11.2
52-319 19 195 279.4 39.6 27.9 8.6 12.2
ASME B107.9m

6-34
 6
Combination Wrenches

12 Point Satin Finish Long Combination Wrench

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number Inches lbs. Length (in) Open End (in) Box End (in) Open End (in) Box End (in)
25-458 1/4 0.05 5.000 0.550 0.390 0.140 0.190
25-460 5/16 0.07 5.750 0.670 0.490 0.170 0.230
25-462 3/8 0.09 6.500 0.790 0.560 0.190 0.250
25-464 7/16 0.14 7.250 0.950 0.670 0.210 0.290
Industrial Wrenches and Sets

25-466 1/2 0.19 8.000 1.040 0.760 0.240 0.330

25-468 9/16 0.23 8.750 1.180 0.840 0.260 0.350
25-470 5/8 0.25 9.500 1.310 0.940 0.280 0.410
25-472 11/16 0.34 10.250 1.430 1.010 0.310 0.440
25-474 3/4 0.43 11.000 1.560 1.100 0.340 0.480
25-476 13/16 0.65 11.750 1.660 1.190 0.350 0.520
25-478 7/8 0.66 12.500 1.810 1.280 0.370 0.550
25-480 15/16 0.91 13.250 1.920 1.360 0.390 0.590
25-482 1 1.02 14.000 2.050 1.450 0.410 0.620
25-484 1-1/16 1.23 14.750 2.200 1.550 0.440 0.650
25-486 1-1/8 1.31 15.500 2.280 1.620 0.470 0.680
25-488 1-3/16 1.52 16.310 2.420 1.720 0.490 0.730
25-490 1-1/4 1.76 17.060 2.570 1.820 0.510 0.740
25-242 1-5/16 2.31 20.125 2.703 2.000 0.500 0.844
25-244 1-3/8 2.15 20.125 2.875 2.062 0.500 0.875
25-246 1-7/16 2.55 21.125 3.000 2.187 0.750 0.937
25-248 1-1/2 2.43 21.125 3.062 2.187 0.625 0.906
25-252 1-5/8 3.10 24.125 3.500 2.437 0.640 0.969
25-254 1-11/16 3.26 24.125 3.500 2.437 0.675 0.969
25-256 1-3/4 5.05 25.625 3.687 2.750 0.760 1.109
25-258 1-13/16 6.10 25.625 3.687 2.750 0.781 1.062
25-260 1-7/8 6.00 27.125 4.062 2.937 0.750 1.125
25-264 2 5.94 27.125 4.062 2.937 0.750 1.125
25-266 2-1/16 5.75 27.125 4.000 2.937 0.750 1.062
25-268 2-1/8 9.00 28.000 4.406 3.250 0.844 1.125
25-270 2-3/16 9.31 28.000 4.406 3.250 0.844 1.125
25-272 2-1/4 9.12 28.000 4.406 3.250 0.844 1.125
25-276 2-3/8 13.61 30.000 5.031 3.750 0.938 1.375
25-280 2-1/2 13.89 30.000 5.031 3.750 0.938 1.375
25-282 2-9/16 14.40 32.000 5.562 4.187 1.000 1.500
25-284 2-5/8 14.50 32.000 5.562 4.187 1.000 1.500
25-288 2-3/4 14.60 32.000 5.562 4.187 1.000 1.500
ASME B107.6 Fed’I Spec. GGG-W-636e

6-35 Always wear eye protection when near tools in use.

 6
Combination Wrenches

12 Point Satin Finish Long Combination Wrench METRIC

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number mm g Length (mm) Open End (mm) Box End (mm) Open End (mm) Box End( mm)
52-456 6 23 127.0 15.9 11.1 4.0 5.6
52-457 7 23 135.0 15.9 11.1 4.0 5.6
52-458 8 23 146.0 15.9 11.1 4.0 5.6
52-459 9 41 155.7 18.5 13.0 4.3 6.1

Industrial Wrenches and Sets

52-460 10 41 170.9 21.3 15.7 5.1 6.9
52-461 11 41 184.2 24.1 17.0 5.3 7.4
52-462 12 59 195.1 25.4 18.3 5.8 7.9
52-463 13 68 207.0 26.4 19.3 6.1 8.4
52-464 14 73 218.9 30.0 21.3 6.6 8.9
52-465 15 95 230.9 31.8 22.6 6.9 9.7
52-466 16 104 241.3 33.3 23.9 7.1 10.4
52-467 17 113 256.0 34.8 24.9 7.4 10.9
52-468 18 150 267.0 36.3 25.7 7.9 11.2
52-469 19 191 279.4 39.6 27.9 8.6 12.2
52-470 20 277 292.1 41.7 29.0 8.6 12.7
52-471 21 295 304.0 43.7 31.0 9.1 13.7
52-472 22 331 317.5 46.0 32.5 9.4 14.0
52-473 23 413 327.9 48.0 33.5 9.7 14.5
52-474 24 445 338.1 50.0 35.3 9.9 15.0
52-475 25 463 355.6 52.1 36.8 10.4 15.7
52-476 26 508 374.7 55.9 39.4 11.2 16.5
52-477 27 508 374.7 55.9 39.4 11.2 16.5
52-478 28 567 393.7 57.9 41.1 11.9 17.3
52-479 29 567 393.7 57.9 41.1 11.9 17.3
52-480 30 603 414.3 61.5 43.7 12.4 18.5
52-482 32 612 433.3 65.3 46.2 12.6 18.8
52-236 36 1016 511.2 76.2 55.5 15.9 23.8
52-241 41 1439 612.8 88.9 61.9 16.3 24.6
52-246 46 2633 650.9 93.6 69.9 19.1 28.2
52-250 50 2690 689.0 103.2 74.6 19.1 28.6
52-255 55 4309 711.2 111.9 82.6 21.4 28.6
52-260 60 6237 762.0 127.8 95.3 23.8 34.9
52-265 65 6622 812.8 141.3 106.3 25.4 38.1
52-270 70 6577 812.8 141.3 106.3 25.4 38.1
ASME B107.9m

6-36
 6
Combination Wrenches

12 Point Black Oxide Long Combination Wrench

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number Inches lbs. Length (in) Open End (in) Box End (in) Open End (in) Box End (in)
30-208 1/4 0.05 5.000 0.550 0.390 0.140 0.190
30-210 5/16 0.07 5.750 0.670 0.490 0.170 0.230
30-211 11/32 0.07 5.750 0.670 0.490 0.170 0.230
30-212 3/8 0.09 6.500 0.790 0.560 0.190 0.250
Industrial Wrenches and Sets

30-214 7/16 0.14 7.250 0.950 0.670 0.210 0.290

30-216 1/2 0.19 8.000 1.040 0.760 0.240 0.330
30-218 9/16 0.23 8.750 1.180 0.840 0.260 0.350
30-220 5/8 0.25 9.500 1.310 0.940 0.280 0.410
30-222 11/16 0.34 10.250 1.430 1.010 0.310 0.440
30-224 3/4 0.43 11.000 1.560 1.100 0.340 0.480
30-226 13/16 0.65 11.750 1.660 1.190 0.350 0.520
30-228 7/8 0.76 12.500 1.810 1.280 0.370 0.550
30-230 15/16 0.91 13.250 1.920 1.360 0.390 0.590
30-232 1 1.02 14.000 2.050 1.450 0.410 0.620
30-234 1-1/16 1.23 14.750 2.200 1.550 0.440 0.650
30-236 1-1/8 1.31 15.500 2.280 1.620 0.470 0.680
30-238 1-3/16 1.52 16.310 2.420 1.720 0.490 0.730
30-240 1-1/4 1.76 17.060 2.570 1.820 0.510 0.740
30-242 1-5/16 2.31 20.125 2.703 2.000 0.500 0.844
30-244 1-3/8 2.15 20.125 2.875 2.062 0.500 0.875
30-246 1-7/16 2.55 21.125 3.000 2.187 0.750 0.937
30-248 1-1/2 2.43 21.125 3.062 2.187 0.625 0.906
30-252 1-5/8 3.10 24.125 3.500 2.437 0.640 0.969
30-254 1-11/16 3.26 24.125 3.500 2.437 0.675 0.969
30-256 1-3/4 5.05 25.625 3.687 2.750 0.760 1.109
30-258 1-13/16 6.10 25.625 3.687 2.750 0.781 1.109
30-260 1-7/8 6.00 27.125 4.062 2.937 0.750 1.125
30-264 2 5.94 27.125 4.062 2.937 0.750 1.125
30-266 2-1/16 5.75 27.125 4.000 2.875 0.750 1.125
30-268 2-1/8 9.00 28.000 4.406 3.250 0.844 1.125
30-270 2-3/16 9.31 28.000 4.406 3.250 0.844 1.125
30-272 2-1/4 9.12 28.000 4.406 3.250 0.844 1.125
30-276 2-3/8 13.61 30.000 5.031 3.750 0.938 1.375
30-280 2-1/2 13.89 30.000 5.031 3.750 0.938 1.375
30-282 2-9/16 12.40 32.000 5.562 4.187 1.000 1.500
30-284 2-5/8 14.50 32.000 5.562 4.187 1.000 1.500
30-288 2-3/4 14.60 32.000 5.562 4.187 1.000 1.500
ASME B107.6 Fed’I Spec. GGG-W-636e

6-37 Always wear eye protection when near tools in use.

 6
Combination Wrenches

12 Point Black Oxide Long Combination Wrench METRIC

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number mm g Length (mm) Open End (mm) Box End (mm) Open End (mm) Box End( mm)
56-206 6 23 127.0 15.9 11.1 4.0 5.6
56-207 7 23 135.0 15.9 11.1 4.0 5.6
56-208 8 23 146.0 15.9 11.1 4.0 5.6
56-209 9 41 155.7 18.5 13.0 4.3 6.1
56-210 10 41 170.9 21.3 15.7 5.1 6.9
56-211

Industrial Wrenches and Sets

11 64 184.2 24.1 17.0 5.3 7.4
56-212 12 91 195.1 25.4 18.3 5.8 7.9
56-213 13 86 207.0 26.4 19.3 6.1 8.4
56-214 14 104 218.9 30.0 21.3 6.6 8.9
56-215 15 114 230.9 31.8 22.6 6.9 9.7
56-216 16 114 241.3 33.3 23.9 7.1 10.4
56-217 17 159 256.0 34.8 24.9 7.4 10.9
56-218 18 154 267.0 36.3 25.7 7.9 11.2
56-219 19 195 279.4 39.6 27.9 8.6 12.2
56-220 20 274 292.1 41.7 29.0 8.6 12.7
56-221 21 299 304.0 43.7 31.0 9.1 13.7
56-222 22 299 317.5 46.0 32.5 9.4 14.0
56-223 23 418 327.9 48.0 33.5 9.7 14.5
56-224 24 413 338.1 50.0 35.3 9.9 15.0
ASME B107.9m

6-38
 6
Combination Wrenches

12 Point Full Polish Regular Length Combination Wrench

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number Inches lbs. Length (in) Open End (in) Box End (in) Open End (in) Box End (in)
25-108 1/4 0.04 3.960 0.530 0.410 0.180 0.240
25-110 5/16 0.05 4.360 0.650 0.510 0.200 0.270
Industrial Wrenches and Sets

25-111 11/32 0.06 4.880 0.710 0.560 0.190 0.250

25-112 3/8 0.10 5.510 0.800 0.660 0.230 0.290
25-114 7/16 0.11 5.800 0.980 0.680 0.240 0.300
25-116 1/2 0.15 6.520 1.140 0.810 0.270 0.340
25-118 9/16 0.20 7.090 1.290 0.890 0.290 0.350
25-120 5/8 0.30 7.950 1.430 0.980 0.310 0.390
25-122 11/16 0.36 8.750 1.560 1.010 0.310 0.440
25-124 3/4 0.42 9.640 1.720 1.100 0.340 0.480
25-126 13/16 0.58 10.930 1.810 1.220 0.360 0.540
25-128 7/8 0.67 11.470 1.828 1.280 0.370 0.550
25-130 15/16 0.81 12.520 1.920 1.360 0.390 0.590
25-132 1 1.00 13.560 2.050 1.450 0.410 0.620
ASME B107.6 Fed’I Spec. GGG-W-636e

6-39 Always wear eye protection when near tools in use.

 6
Combination Wrenches

12 Point Full Polish Extra Short Combination Wrench

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number Inches lbs. Length (in) Open End (in) Box End (in) Open End (in) Box End (in)
25-162 3/8 0.06 3.688 0.784 0.575 0.192 0.263
25-164 7/16 0.08 4.000 0.909 0.664 0.231 0.294
25-166 1/2 0.10 4.188 1.044 0.737 0.228 0.327
25-168 9/16 0.14 4.438 1.182 0.834 0.253 0.357
25-170 5/8 0.18 4.813 1.303 0.927 0.306 0.381
25-172 11/16 0.21 5.000 1.442 0.994 0.308 0.427

Industrial Wrenches and Sets

25-174 3/4 0.28 5.438 1.563 1.061 0.351 0.473
ASME B107.6 Fed’I Spec. GGG-W-636e

6 Point Full Polish Regular Length Combination Wrench

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number Inches lbs. Length (in) Open End (in) Box End (in) Open End (in) Box End (in)
25-004 1/8 0.01 3.000 0.281 0.234 0.094 0.109
25-005 5/32 0.01 3.000 0.359 0.281 0.125 0.140
25-006 3/16 0.02 3.188 0.461 0.344 0.140 0.156
25-007 7/32 0.02 3.375 0.510 0.375 0.156 0.171
25-008 1/4 0.04 3.960 0.530 0.410 0.180 0.240
25-010 5/16 0.05 4.360 0.650 0.510 0.200 0.270
25-011 11/32 0.06 4.880 0.710 0.560 0.190 0.250
25-012 3/8 0.10 5.510 0.800 0.660 0.230 0.290
25-014 7/16 0.11 5.800 0.980 0.680 0.240 0.300
25-016 1/2 0.15 6.520 1.140 0.810 0.270 0.340
25-018 9/16 0.20 7.090 1.290 0.890 0.290 0.350
25-020 5/8 0.30 7.950 1.430 0.980 0.310 0.390
25-022 11/16 0.36 8.750 1.560 1.010 0.310 0.440
25-024 3/4 0.42 9.640 1.720 1.100 0.340 0.480
25-026 13/16 0.58 10.930 1.810 1.220 0.360 0.540
25-028 7/8 0.67 11.470 1.828 1.280 0.370 0.550
25-030 15/16 0.81 12.520 1.920 1.360 0.390 0.590
25-032 1 1.00 13.560 2.050 1.450 0.410 0.620
ASME B107.6 Fed’I Spec. GGG-W-636e

6-40
 6
Combination Wrenches

12 Point Full Polish Regular Length Combination Wrench METRIC

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number mm g Length (mm) Open End (mm) Box End (mm) Open End (mm) Box End( mm)
52-106 6 16 100.6 13.5 10.4 4.6 6.1
Industrial Wrenches and Sets

52-107 7 20 106.9 14.0 11.9 4.6 6.1

52-108 8 23 110.7 13.5 13.0 5.1 6.9
52-109 9 27 124.0 18.0 14.2 4.8 6.4
52-110 10 46 140.0 20.3 16.8 5.8 7.4
52-111 11 50 147.3 22.9 17.3 6.1 7.6
52-112 12 60 158.0 23.9 19.3 6.6 8.1
52-113 13 67 165.6 24.9 20.6 6.9 8.6
52-114 14 88 180.1 29.0 22.6 7.4 8.9
52-115 15 103 191.0 31.5 24.4 7.6 9.7
52-116 16 134 201.9 32.8 24.9 7.9 9.9
52-117 17 140 212.9 34.8 24.9 7.4 10.9
52-118 18 163 222.3 36.3 25.7 7.9 11.2
52-119 19 190 244.9 39.6 27.9 9.1 12.2
52-120 20 207 260.9 41.7 29.0 8.6 12.7
52-121 21 261 277.6 43.7 31.0 9.1 13.7
52-122 22 304 291.3 46.0 32.5 9.4 14.0
52-123 23 326 308.4 48.0 33.5 9.7 14.5
52-124 24 367 318.0 48.8 34.5 9.9 15.0
52-125 25 455 344.4 52.1 36.8 10.4 15.7
ASME B107.9m

6-41 Always wear eye protection when near tools in use.

 6
Combination Wrenches

6 Point Full Polish Regular Length Combination Wrench METRIC

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number mm g Length (mm) Open End (mm) Box End (mm) Open End (mm) Box End( mm)
52-004 4 5 76.2 9.1 7.1 3.2 3.5
52-005 5 9 80.1 11.7 8.7 3.6 4.0
52-083 5.5 11 85.7 13.0 9.5 3.9 4.3
52-006 6 16 100.6 13.5 10.4 4.6 6.1
52-007 7 20 106.9 14.0 11.9 4.6 6.1
52-008 8 23 110.7 13.5 13.0 5.1 6.9
52-009 9 27 124.0 18.0 14.2 4.8 6.4
52-010 10 46 140.0 20.3 16.8 5.8 7.4
52-011 11 50 147.3 22.9 17.3 6.1 7.6

Industrial Wrenches and Sets

52-012 12 60 158.0 23.9 19.3 6.6 8.1
52-013 13 67 165.6 24.9 20.6 6.9 8.6
52-014 14 88 180.1 29.0 22.6 7.4 8.9
52-015 15 103 191.0 31.5 24.4 7.6 9.7
52-016 16 134 201.9 32.8 24.9 7.9 9.9
52-017 17 140 212.9 34.8 24.9 7.4 10.9
52-018 18 163 222.3 36.3 25.7 7.9 11.2
52-019 19 190 244.9 39.6 27.9 9.1 12.2
52-020 20 207 260.9 41.7 29.0 8.6 12.7
52-021 21 261 277.6 43.7 31.0 9.1 13.7
52-022 22 304 291.3 46.0 32.5 9.4 14.0
52-023 23 326 308.4 48.0 33.5 9.7 14.5
52-024 24 367 318.0 48.8 34.5 9.9 15.0
52-025 25 455 344.4 52.1 36.8 10.4 15.7
ASME B107.9m

12 Point Full Polish Extra Short Combination Wrench METRIC

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number mm g Length (mm) Open End (mm) Box End (mm) Open End (mm) Box End( mm)
52-160 10 25 96.0 21.1 15.2 5.0 6.6
52-161 11 37 101.6 23.4 16.7 5.7 7.3
52-162 12 48 105.6 25.6 18.0 5.9 7.8
52-163 13 52 108.7 27.8 19.3 6.0 8.3
52-164 14 62 114.3 28.9 20.8 6.9 9.0
52-165 15 71 118.3 30.9 22.1 7.3 9.4
52-166 16 82 122.2 32.9 23.5 7.7 9.8
52-167 17 94 125.4 35.3 24.9 9.0 10.5
52-168 18 98 130.2 37.7 26.4 8.2 11.3
52-169 19 129 138.1 39.4 27.8 8.9 11.7
ASME B107.9m

6-42
 6
Combination Wrenches

12 Point Satin Finish Regular Length Combination Wrench

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number Inches lbs. Length (in) Open End (in) Box End (in) Open End (in) Box End (in)
30-308 1/4 0.04 3.960 0.530 0.410 0.180 0.240
30-310 5/16 0.05 4.360 0.650 0.510 0.200 0.270
30-311 11/32 0.06 4.880 0.710 0.560 0.190 0.250
30-312 3/8 0.10 5.510 0.800 0.660 0.230 0.290
30-314 7/16 0.11 5.800 0.980 0.680 0.240 0.300
Industrial Wrenches and Sets

30-316 1/2 0.15 6.520 1.140 0.810 0.270 0.340

30-318 9/16 0.20 7.090 1.290 0.890 0.290 0.350
30-320 5/8 0.30 7.950 1.430 0.980 0.310 0.390
30-322 11/16 0.36 8.750 1.560 1.010 0.310 0.440
30-324 3/4 0.42 9.640 1.720 1.100 0.340 0.480
30-326 13/16 0.58 10.930 1.810 1.220 0.360 0.540
30-328 7/8 0.67 11.470 1.828 1.280 0.370 0.550
30-330 15/16 0.81 12.520 1.920 1.360 0.390 0.590
30-332 1 1.00 13.560 2.050 1.450 0.410 0.620

6-43 Always wear eye protection when near tools in use.

 6
Combination Wrenches

12 Point Satin Finish Regular Length Combination Wrench METRIC

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number mm g Length (mm) Open End (mm) Box End (mm) Open End (mm) Box End( mm)
56-406 6 16 100.6 13.5 10.4 4.6 6.1
56-407 7 20 106.9 14.0 11.9 4.6 6.1
56-408 8 23 110.7 13.5 13.0 5.1 6.9
56-409 9 27 124.0 18.0 14.2 4.8 6.4
56-410 10 46 140.0 20.3 16.8 5.8 7.4

Industrial Wrenches and Sets

56-411 11 50 147.3 22.9 17.3 6.1 7.6
56-412 12 60 158.0 23.9 19.3 6.6 8.1
56-413 13 67 165.6 24.9 20.6 6.9 8.6
56-414 14 88 180.1 29.0 22.6 7.4 8.9
56-415 15 103 191.0 31.5 24.4 7.6 9.7
56-416 16 134 201.9 32.8 24.9 7.9 9.9
56-417 17 140 212.9 34.8 24.9 7.4 10.9
56-418 18 163 222.3 36.3 25.7 7.9 11.2
56-419 19 190 244.9 39.6 27.9 9.1 12.2
56-420 20 207 260.9 41.7 29.0 8.6 12.7
56-421 21 261 277.6 43.7 31.0 9.1 13.7
56-422 22 304 291.3 46.0 32.5 9.4 14.0
56-423 23 326 308.4 48.0 33.5 9.7 14.5
56-424 24 367 318.0 48.8 34.5 9.9 15.0
56-425 25 455 344.4 52.1 36.8 10.4 15.7

6-44
 6
Combination Wrenches

12 Point Black Oxide Regular Length Combination Wrench

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number Inches lbs. Length (in) Open End (in) Box End (in) Open End (in) Box End (in)
30-108 1/4 0.02 3.500 0.625 0.437 0.156 0.219
30-110 5/16 0.03 4.000 0.781 0.531 0.188 0.279
30-112 3/8 0.06 4.250 0.844 0.625 0.210 0.296
30-114 7/16 0.07 5.062 0.969 0.719 0.245 0.344
30-116 1/2 0.11 5.500 1.078 0.812 0.250 0.359
30-118 9/16 0.15 5.937 1.234 0.875 0.281 0.373
Industrial Wrenches and Sets

30-120 5/8 0.16 6.312 1.375 0.984 0.312 0.437

30-122 11/16 0.24 7.125 1.500 1.047 0.312 0.469
30-124 3/4 0.26 7.375 1.625 1.156 0.328 0.500
30-126 13/16 0.37 7.500 1.828 1.234 0.375 0.594
30-128 7/8 0.49 7.875 1.828 0.133 0.390 0.594
30-130 15/16 0.68 8.250 2.000 1.406 0.438 0.625
30-132 1 0.76 8.625 2.062 1.500 0.453 0.656
ASME B107.6 Fed’I Spec. GGG-W-636e

12 Point Black Oxide Regular Length Combination Wrench METRIC

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number mm g Length (mm) Open End (mm) Box End (mm) Open End (mm) Box End( mm)
56-306 6 16 100.6 13.5 10.4 4.6 6.1
56-307 7 20 106.9 14.0 11.9 4.6 6.1
56-308 8 23 110.7 13.5 13.0 5.1 6.9
56-309 9 27 124.0 18.0 14.2 4.8 6.4
56-310 10 46 140.0 20.3 16.8 5.8 7.4
56-311 11 50 147.3 22.9 17.3 6.1 7.6
56-312 12 60 158.0 23.9 19.3 6.6 8.1
56-313 13 67 165.6 24.9 20.6 6.9 8.6
56-314 14 88 180.1 29.0 22.6 7.4 8.9
56-315 15 103 191.0 31.5 24.4 7.6 9.7
56-316 16 134 201.9 32.8 24.9 7.9 9.9
56-317 17 140 212.9 34.8 24.9 7.4 10.9
56-318 18 163 222.3 36.3 25.7 7.9 11.2
56-319 19 190 244.9 39.6 27.9 9.1 12.2
56-320 20 207 260.9 41.7 29.0 8.6 12.7
56-321 21 261 277.6 43.7 31.0 9.1 13.7
56-322 22 304 291.3 46.0 32.5 9.4 14.0
56-323 23 326 308.4 48.0 33.5 9.7 14.5
56-324 24 367 318.0 48.8 34.5 9.9 15.0
56-325 25 455 344.4 52.1 36.8 10.4 15.7
ASME B107.6 Fed’I Spec. GGG-W-636e

6-45 Always wear eye protection when near tools in use.

 6
Combination Wrenches

12 Point Full Polish Flex Head Wrench

A B1 B2 C1 C2 D E
Product Opening Weight Overall Hd. Width Socket Head Socket Wrench Length to
Number Inches lbs. Length (in) Wrench (in) End (in) Thkns. (in) Nose Dia. (in) Depth (in) Shoulder (in)
25-508 1/4 0.14 4.718 0.625 0.500 0.180 0.375 0.656 0.250
25-510 5/16 0.16 5.562 0.781 0.562 0.195 0.452 0.656 0.250
25-512 3/8 0.17 6.343 0.875 0.562 0.210 0.562 0.656 -
25-514 7/16 0.22 7.125 0.968 0.738 0.245 0.625 0.875 0.375

Industrial Wrenches and Sets

25-516 1/2 0.28 8.281 1.078 0.738 0.260 0.738 0.875 -
25-518 9/16 0.38 8.703 1.234 0.875 0.286 0.781 1.062 0.500
25-520 5/8 0.44 9.484 1.375 0.875 0.296 0.875 1.062 -
25-522 11/16 0.60 10.265 1.500 0.984 0.312 0.984 1.187 -
25-524 3/4 0.62 11.046 1.625 1.046 0.344 1.046 1.187 -
25-526 13/16 0.94 11.875 1.812 1.125 0.375 1.125 1.438 -
25-528 7/8 1.10 12.750 1.812 1.187 0.390 1.187 1.500 -

6-46
 6
Box End Wrenches

Set 26-852
7 Pc. 12 Point Full Polish 15° Offset Box
Wrench Set
Approximate Weight, 3.87 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
26-643 3/8 x 7/16 26-733 13/16 x 7/8
26-658 7/16 x 1/2 26-751 15/16 x 1
26-679 9/16 x 5/8 26-766 1-1/16 x 1-1/8
26-706 11/16 x 3/4
Vinyl Roll
29-428
Industrial Wrenches and Sets

Set 26-849
5 Pc. 12 Point Full Polish 15° Offset Box
Wrench Set
Approximate Weight, 3.87 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
26-643 3/8 x 7/16 26-706 11/16 x 3/4
26-658 7/16 x 1/2 26-733 13/16 x 7/8
26-679 9/16 x 5/8
Vinyl Roll
29-421

6-47 Always wear eye protection when near tools in use.

 6
Box End Wrenches

Set 53-845 METRIC

11 Pc. 12 Point Full Polish 15° Offset Box
Wrench Set
Approximate Weight, 4.26 lbs. (1,934 g)
Product Opening, Product Opening,
Number mm Number mm
53-616 6x7 53-691 17 x 19
53-622 8x9 53-719 21 x 23
53-634 10 x 11 53-727 22 x 24
53-652 12 x 13 53-762 27 x 30
53-667 14 x 15 53-775 30 x 32
53-685 16 x 18
Vinyl Roll
29-458

Industrial Wrenches and Sets

Set 53-843 METRIC
7 Pc. 12 Point Full Polish 15° Offset Box
Wrench Set
Approximate Weight, 1.60 lbs. (726 g)
Product Opening, Product Opening,
Number mm Number mm
53-616 6x7 53-667 14 x 15
53-622 8x9 53-685 16 x 18
53-634 10 x 11 53-691 17 x 19
53-652 12 x 13
Vinyl Roll
29-432

Set 53-841 METRIC

5 Pc. 12 Point Full Polish 15° Offset Box
Wrench Set
Approximate Weight, 1.60 lbs. (726 g)
Product Opening, Product Opening,
Number mm Number mm
53-616 6x7 53-652 12 x 13
53-622 8x9 53-667 14 x 15
53-634 10 x 11
Vinyl Roll
29-420

6-48
 6
Box End Wrenches

Set 27-570
6 Pc. 12 Point Full Polish 45° Offset Box
Wrench Set
Approximate Weight, 2.70 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
27-343 3/8 x 7/16 27-424 3/4 x 7/8
27-367 1/2 x 9/16 27-451 15/16 x 1
27-394 5/8 x 11/16 27-466 1-1/16 x 1-1/8
Vinyl Roll
29-424
Industrial Wrenches and Sets

Set 54-573 METRIC

9 Pc. 12 Point Full Polish 45° Offset Box
Wrench Set
Approximate Weight, 5.20 lbs. (2,338 g)
Product Opening, Product Opening,
Number mm Number mm
54-322 8x9 54-391 17 x 19
54-334 10 x 11 54-415 20 x 22
54-352 12 x 13 54-419 21 x 23
54-367 14 x 15 54-445 24 x 27
54-385 16 x 18

Vinyl Roll
29-442

Set 54-571 METRIC

6 Pc. 12 Point Full Polish 45° Offset Box
Wrench Set
Approximate Weight, 1.90 lbs. (840 g)
Product Opening, Product Opening,
Number mm Number mm
54-334 10 x 11 54-385 16 x 18
54-355 12 x 14 54-391 17 x 19
54-361 13 x 15 54-433 23 x 24
Vinyl Roll
29-424

6-49 Always wear eye protection when near tools in use.

 6
Box End Wrenches

Set 27-635
5 Pc. 25° Offset Ratcheting Box Wrench Set
Approximate Weight, 2.20 lbs.
6-Pt. Offset 12-Pt. Offset
Product Opening, Product Opening,
Number Inches Number Inches
27-613 1/4 x 5/16 27-622 5/8 x 11/16
27-616 3/8 x 7/16 27-626 3/4 x 7/8
27-619 1/2 x 9/16
Vinyl Roll
29-420

Industrial Wrenches and Sets

Set 54-668 METRIC
7 Pc. 25° Offset Ratcheting Box Wrench Set
Approximate Weight, 3.60 lbs. (1,631 g)
6-Pt. Offset 12-Pt. Offset
Product Opening, Product Opening,
Number mm Number mm
54-637 7x8 54-649 15 x 17
54-640 9 x 10 54-652 16 x 18
54-643 11 x 12 54-655 19 x 21
54-646 13 x 14
Vinyl Roll
29-436

6-50
 6
Box End Wrenches

Set 27-605
3 Pc. Ratcheting Box Wrench Set
Approximate Weight, 1.10 Ibs.
Product Opening, Product Opening,
Number Inches Number Inches
27-591 3/8 x 7/16 27-599 5/8 x 3/4
27-594 1/2 x 9/16
Vinyl Roll
29-472
Industrial Wrenches and Sets

Set 27-608
5 Pc. Ratcheting Box Wrench Set
Approximate Weight, 1.90 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
27-588 1/4 x 5/16 27-596 5/8 x 11/16
27-591 3/8 x 7/16 27-602 3/4 x 7/8
27-594 1/2 x 9/16
Vinyl Roll
29-420

Set 54-608 METRIC

5 Pc. Ratcheting Box Wrench Set
Approximate Weight, 1.80 lbs. (794 g)
Product Opening, Product Opening,
Number mm Number mm
54-587 7x8 6 Pt 54-596 13 x 14 6 Pt
54-590 9 x 10 6 Pt 54-599 15 x 17 12 Pt
54-593 11 x 12 6 Pt
Vinyl Roll
29-420

6-51 Always wear eye protection when near tools in use.

 6
Box End Wrenches

12 Point Full Polish 15° Offset Box Wrench

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number Inches lbs. Length (in) Open End (in) Box End (in) Open End (in) Box End (in)
26-643 3/8 x 7/16 0.12 7.750 0.562 0.656 0.296 0.312

Industrial Wrenches and Sets

26-658 7/16 x 1/2 0.15 8.453 0.656 0.734 0.312 0.328
26-667 1/2 x 9/16 0.17 9.140 0.734 0.844 0.328 0.359
26-679 9/16 x 5/8 0.30 9.812 0.844 0.906 0.359 0.396
26-697 5/8 x 3/4 0.44 10.562 0.906 1.062 0.390 0.453
26-706 11/16 x 3/4 0.44 11.188 1.000 1.062 0.406 0.453
26-724 3/4 x 7/8 0.58 12.656 1.062 1.250 0.453 0.468
26-733 13/16 x 7/8 0.64 12.656 1.125 1.250 0.468 0.468
26-751 15/16 x 1 0.75 15.375 1.312 1.437 0.515 0.531
26-754 15/16 x 1-1/16 0.97 15.500 1.375 1.531 0.562 0.594
26-763 1 x 1-1/8 1.30 16.625 1.500 1.562 0.656 0.703
26-766 1-1/16 x 1-1/8 1.22 17.000 1.500 1.562 0.656 0.703
26-769* 1-1/16 x 1-1/4 1.59 17.250 1.531 1.812 0.625 0.718
26-775* 1-1/8 x 1-5/16 1.61 17.250 1.531 1.812 0.625 0.718
26-778* 1-1/4 x 1-5/16 2.41 19.000 1.843 2.000 0.750 0.812
26-793* 1-7/16 x 1-1/2 2.87 21.500 2.093 2.250 0.937 1.000
26-799* 1-7/16 x 1-5/8 2.89 21.500 2.093 2.250 0.937 1.000
ASME B107.6 Fed’I Spec. GGG-W-636e
*Satin Finish

6-52
 6
Box End Wrenches

12 Point Full Polish 15° Offset Short Box Wrench

A B1 B2 C1 C2
Product Opening Weight Overall Width Width Thickness Thickness
Number Inches lbs. Length (in) Open End (in) Box End (in) Open End (in) Box End (in)
26-543 3/8 x 7/16 0.05 4.750 0.560 0.656 0.281 0.281
Industrial Wrenches and Sets

26-558 7/16 x 1/2 0.10 5.000 0.750 0.656 0.312 0.281

26-567 1/2 x 9/16 0.09 5.500 0.750 0.812 0.312 0.343
26-579 9/16 x 5/8 0.12 6.000 0.828 0.937 0.343 0.375
ASME B107.6 Fed’I Spec. GGG-W-636e

6-53 Always wear eye protection when near tools in use.

 6
Box End Wrenches

12 Point Full Polish 15° Offset Box Wrench METRIC

A B1 B2 C1 C2
Product Opening Weight Overall Box End Box End Box End Box End
Number mm g Length Width Width Thickness Thickness
53-616 6x7 54 179.4 11.1 13.5 6.4 6.4
53-622 8x9 68 193.7 14.3 16.6 7.1 7.1
53-634 10 x 11 54 196.9 14.3 16.6 7.5 7.9
53-652 12 x 13 68 214.7 16.7 18.6 7.9 8.3

Industrial Wrenches and Sets

53-661 13 x 15 77 246.0 19.0 23.0 8.7 10.1
53-667 14 x 15 136 246.0 19.0 23.0 8.7 10.1
53-685 16 x 18 200 268.3 23.0 27.0 9.9 11.5
53-691 17 x 19 200 284.2 25.4 27.0 10.3 11.5
53-715 20 x 22 222 321.5 27.0 31.8 11.5 11.9
53-719 21 x 23 291 321.5 28.6 31.8 11.9 11.9
53-727 22 x 24 381 349.2 34.9 36.5 14.3 15.1
53-742 24 x 26 358 390.5 33.3 36.5 13.1 13.5
53-762 27 x 30 572 438.2 38.9 46.0 15.9 18.2
53-775 30 x 32 725 482.6 46.8 50.8 19.0 20.6
ASME B107.9m

12 Point Full Polish 45° Offset Short Box Wrench

A B1 B2 C1 C2
Product Opening Weight Overall Box End Box End Box End Box End Offset Offset
Number Inches lbs. Length (in) Width (in) Width (in) Thkns (in) Thkns (in) C (in) C (in)
27-143 3/8 x 7/16 0.06 4.500 0.625 0.687 0.281 0.328 0.875 0.875
27-158 7/16 x 1/2 0.12 5.500 0.750 0.843 0.343 0.375 1.156 1.296
27-167 1/2 x 9/16 0.16 5.500 0.750 0.843 0.343 0.375 1.156 1.296
27-194 5/8 x 11/16 0.15 6.062 0.921 1.000 0.375 0.406 1.531 1.531
ASME B107.6 Fed’I Spec. GGG-W-636e

6-54
 6
Box End Wrenches

12 Point Full Polish 45° Offset Long Box Wrench

A B1 B2 C1 C2
Product Opening Weight Overall Box End Box End Box End Box End Offset Offset
Number Inches lbs. Length (in) Width (in) Width (in) Thkns (in) Thkns (in) C (in) C (in)
27-334 5/16 x 3/8 0.08 6.750 0.500 0.578 0.250 0.281 0.875 0.875
27-343 3/8 x 7/16 0.13 7.312 0.562 0.656 0.296 0.312 1.062 1.062
27-358 7/16 x 1/2 0.17 7.937 0.625 0.718 0.312 0.328 1.312 1.437
27-367 1/2 x 9/16 0.19 8.670 0.734 0.844 0.344 0.359 1.437 1.562
Industrial Wrenches and Sets

27-379 9/16 x 5/8 0.30 9.250 0.844 0.906 0.359 0.396 1.593 1.687
27-394 5/8 x 11/16 0.33 9.844 0.906 1.000 0.406 0.437 1.312 1.343
27-397 5/8 x 3/4 0.45 10.375 0.906 1.062 0.406 0.468 1.687 1.875
27-406 11/16 x 3/4 0.47 10.375 0.906 1.062 0.406 0.468 1.750 1.875
27-424 3/4 x 7/8 0.68 11.500 1.062 1.250 0.484 0.515 1.875 2.125
27-451 15/16 x 1 1.00 14.500 1.312 1.375 0.562 0.594 2.500 2.500
27-466 1-1/16x1-1/8 1.64 17.000 1.500 1.562 0.688 0.718 2.375 1.875
27-469 1-1/16x1-1/4 1.77 18.000 1.656 2.000 0.718 0.750 2.593 2.562
27-475 1-1/8x1-5/16 1.75 18.000 1.656 2.000 0.718 0.750 2.593 2.562
27-481 1-1/4x1-7/16 1.75 19.000 1.812 2.062 0.750 0.812 2.937 3.187
ASME B107.6 Fed’I Spec. GGG-W-636e

6-55 Always wear eye protection when near tools in use.

 6
Box End Wrenches

12 Point Full Polish 45° Offset Box Wrench METRIC

A B1 B2 C1 C2 D1 D2
Product Opening Weight Overall Box End Box End Box End Box End Offset Offset Offset Offset
Number mm g Length (mm) Width (mm) Width (mm) Thkns (mm) Thkns (mm) H (mm) C (mm) H (mm) C (mm)
54-322 8x9 36 190.5 13.0 15.0 5.9 6.4 15.9 22.2 15.9 22.2
54-334 10 x 11 59 185.7 14.3 16.7 7.5 7.9 15.9 26.9 15.9 26.9
54-352 12 x 13 77 201.6 15.9 18.2 7.9 8.3 17.9 36.5 17.9 39.6
54-355 12 x 14 86 220.2 18.6 21.4 8.7 9.1 19.0 36.5 19.0 39.6

Industrial Wrenches and Sets

54-361 13 x 15 136 227.8 19.0 23.0 8.7 10.0 19.0 36.5 19.0 39.6
54-367 14 x 15 159 227.8 19.0 23.0 8.7 10.0 19.0 33.3 19.0 34.1
54-385 16 x 18 195 250.0 23.0 25.4 10.3 11.1 23.8 42.8 23.8 47.6
54-391 17 x 19 218 275.4 25.4 27.0 11.1 11.9 28.6 44.4 28.6 47.6
54-406 19 x 22 318 292.1 27.0 31.8 12.3 13.1 28.6 47.6 28.6 53.9
54-415 20 x 22 308 339.7 28.6 33.3 13.0 18.8 28.6 46.0 28.6 47.6
54-418 21 x 22 345 336.5 30.5 32.9 13.1 14.3 25.4 46.0 27.0 47.6
54-419 21 x 23 311 336.5 30.5 32.9 13.1 14.3 25.4 46.0 27.0 47.6
54-433 23 x 24 390 346.0 32.5 34.9 14.3 15.1 31.8 63.5 31.8 63.5
54-445 24 x 27 508 397.7 34.9 38.5 15.9 17.5 32.5 32.6 35.3 35.5
54-462 27 x 30 745 457.2 42.9 47.6 18.3 19.0 36.5 65.8 36.5 65.1
54-475 30 x 32 803 457.2 42.9 47.6 18.3 19.0 36.5 65.8 36.5 65.1
ASME B107.9m

12 Point Satin Finish Halfmoon Wrench

A B1 B2 C1 C2
Product Opening Weight Overall Box End Box End Box End Box End
Number Inches lbs. Length (in) Width (in) Width (in) Thickness (in) Thickness (in)
27-264 7/16 x 1/2 0.19 5.830 0.660 0.750 0.322 0.322
27-268 9/16 x 5/8 0.39 7.870 0.840 0.946 0.370 0.370

6-56
 6
Box End Wrenches

6 or 12 Point 25° Offset Ratcheting Box Wrench

A B1 B2 C D
Product Opening Weight, Overall Head Head Head Offset
Number Inches lbs. Length (in) Width (in) Width (in) Thickness (in) Height (in)
27-613* 1/4 x 5/16 0.13 4.093 0.593 0.656 0.312 0.875
27-614 1/4 x 5/16 0.13 4.328 0.625 0.375 0.375 0.875
27-616* 3/8 x 7/16 0.18 5.218 0.781 0.875 0.312 1.250
27-617 3/8 x 7/16 0.18 5.968 0.796 0.906 0.375 1.250
Industrial Wrenches and Sets

27-619* 1/2 x 9/16 0.46 6.468 1.000 1.125 0.375 1.437

27-620 1/2 x 9/16 0.46 6.515 1.015 1.156 0.500 1.437
27-622 5/8 x 11/16 0.66 7.656 1.281 1.437 0.375 1.181
27-624 5/8 x 3/4 0.68 7.656 1.281 1.437 0.375 1.181
27-626 3/4 x 7/8 0.75 8.750 1.406 1.562 0.375 2.250
27-628 13/16 x 15/16 0.75 8.750 1.406 1.562 0.375 2.250
*6 Point

6 or 12 Point 25° Offset Ratcheting Box Wrench METRIC

A B1 B2 C D
Product Opening Weight, Overall Head Head Head Offset
Number Inches g Length (mm) Width (mm) Width (mm) Thickness (mm) Height (imm)
54-637* 7x8 63 104.0 15.1 16.7 7.9 22.2
54-640* 9 x 10 100 132.6 19.8 22.2 7.9 28.6
54-643* 11 x 12 208 164.3 25.4 28.6 9.5 36.5
54-646* 13 x 14 195 164.3 25.4 28.6 9.5 36.5
54-649 15 x 17 313 194.5 32.5 36.5 9.5 47.6
54-652 16 x 18 299 194.5 32.5 36.5 9.5 47.6
54-655 19 x 21 362 222.3 35.7 39.7 9.5 57.2
* 6 Point

6-57 Always wear eye protection when near tools in use.

 6
Box End Wrenches

12 Point Ratcheting Box Wrench

Product Opening Overall Weight
Number Inches Length (in) lbs.
27-588 1/4 x 5/16 4.380 0.13
27-591 3/8 x 7/16 5.510 0.15
27-594 1/2 x 9/16 6.860 0.30
27-596 5/8 x 11/16 8.130 0.45
27-599 5/8 x 3/4 8.130 0.45
27-601 13/16 x 15/16 9.250 0.46
27-602 3/4 x 7/8 9.250 0.50

Industrial Wrenches and Sets

27-603 1 x 1-1/16 15.250 1.40
27-604 1-1/8 x 1-1/4 15.000 1.26

6 or 12 Point Ratcheting Box Wrench METRIC

Product Opening Overall Weight
Number mm Length (mm) g
54-587* 7x8 111.2 63
54-590* 9 x 10 139.7 91
54-593* 11 x 12 174.8 136
54-596* 13 x 14 174.8 136
54-599 15 x 17 206.5 204
54-602 16 x 18 203.2 195
54-605 19 x 21 234.9 222
*Has 6-point openings

Refrigeration Ratcheting Box Wrenches

4-sizes-in-1 ratcheting box wrenches with “finger-tip” reversing feature on both ends.
Designed for servicing automotive, commercial, and home air conditioners, refrigeration
units and freezers. Hex openings are for packing gland fittings, mounting bolts and
compressors, clutch bolts, various tube fittings, dust cap nuts, oil check plugs and other
adaptations. Square openings are used on male service valves, plug fittings, compressor
valves and refrigerant charging tanks.

Product Length Weight

Number Description Inches lbs.
27-663 1/4" - 3/16" Sq x 9/16" - 1/2" Hex, both ends reversible 6.750 0.50
27-664 3/8" - 5/16" Sq x 1/4" - 3/16" Sq, both ends reversible 5.500 0.25
27-665 3/8" - 5/16" Sq x 1/4" - 3/16" Sq, Offset style - both ends reversible 5.500 0.25

6-58
 6
Open End Wrenches

Set 26-282
10 Pc. Full Polish Open End Wrench Set
Approximate Weight, 8.01 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
26-022 1/4 x 5/16 26-139 7/8 x 15/16
26-043 3/8 x 7/16 26-163 1 x 1-1/8
26-067 1/2 x 9/16 26-169 1-1/16 x 1-1/4
26-094 5/8 x 11/16 26-187 1-5/16 x 1-1/2
26-121 3/4 x 13/16 26-190 1-3/8 x 1-7/16
Vinyl Roll
29-454
Industrial Wrenches and Sets

Set 26-273
5 Pc. Full Polish Open End Wrench Set
Approximate Weight, 1.75 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
26-043 3/8 x 7/16 26-121 3/4 x 13/16
26-067 1/2 x 9/16 26-139 7/8 x 15/16
26-094 5/8 x 11/16
Vinyl Roll
29-420

Set 53-273 METRIC

10 Pc. Full Polish Open End Wrench Set
Approximate Weight, 8.10 lbs. (1,848 g)
Product Opening, Product Opening,
Number mm Number mm
53-016 6x7 53-082 16 x 17
53-022 8x9 53-096 18 x 19
53-034 10 x 11 53-115 20 x 22
53-052 12 x 13 53-119 21 x 23
53-067 14 x 15 53-142 24 x 26

Vinyl Roll
29-452

6-59 Always wear eye protection when near tools in use.

 6
Open End Wrenches

Set 53-270 METRIC

6 Pc. Full Polish Open End Wrench Set
Approximate Weight, 1.10 lbs. (499 g)
Product Opening, Product Opening,
Number mm Number mm
53-022 8x9 53-067 14 x 15
53-034 10 x 11 53-082 16 x 17
53-052 12 x 13 53-096 18 x 19

Vinyl Roll
29-422

Industrial Wrenches and Sets

Set 30-975
10 Pc. Black Oxide Open End Wrench Set
Approximate Weight, 9.01 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
30-734 5/16 x 3/8 30-851 15/16 x 1
30-758 7/16 x 1/2 30-869 1-1/16 x 1-1/4
30-779 9/16 x 5/8 30-872 1-1/8 x 1-1/4
30-806 11/16 x 3/4 30-896 1-7/16 x 1-5/8
30-824 3/4 x 7/8 30-902 1-1/2 x 1-5/8

Vinyl Roll
29-454

Set 30-973
5 Pc. Black Oxide Open End Wrench Set
Approximate Weight, 1.92 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
30-734 5/16 x 3/8 30-806 11/16 x 3/4
30-758 7/16 x 1/2 30-824 3/4 x 7/8
30-779 9/16 x 5/8
Vinyl Roll
29-420

6-60
 6
Open End Wrenches

Set 27-770
8 Pc. Extra Thin Tappet Wrench Set
Approximate Weight, 2.96 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
27-643* 3/8 x 7/16 27-694* 5/8 x 11/16
27-667* 1/2 x 9/16 27-724* 3/4 x 7/8

*Furnished in pairs.
Vinyl Roll
29-440
Industrial Wrenches and Sets

Set 27-768
4 Pc. Extra Thin Tappet Wrench Set
Approximate Weight, 1.94 lbs.
Product Opening,
Number Inches
27-658 7/16 x 1/2
27-667* 1/2 x 9/16
27-679 9/16 x 5/8

*Furnished in pairs.
Vinyl Roll
29-416

Set 27-895
14 Pc. Full Polish 15° and 60° Angle Wrench Set
Approximate Weight, 8.27 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
27-812 3/8 27-826 13/16
27-814 7/16 27-828 7/8
27-816 1/2 27-830 15/16
27-818 9/16 27-832 1
27-820 5/8 27-834 1-1/16
27-822 11/16 27-836 1-1/8
27-824 3/4 27-840 1-1/4

Vinyl Roll
29-464

6-61 Always wear eye protection when near tools in use.

 6
Open End Wrenches

Set 27-885
7 Pc. Full Polish 15° and 60° Angle Wrench Set
Approximate Weight, 4.86 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
27-812 3/8 27-820 5/8
27-814 7/16 27-822 11/16
27-816 1/2 27-824 3/4
27-818 9/16

Vinyl Roll
29-436

Industrial Wrenches and Sets

Set 27-937
9 Pc. Full Polish 15° and 80° Miniature Angle
Wrench Set
Approximate Weight, 0.61 Ibs.
Product Opening, Product Opening,
Number Inches Number Inches
27-907 7/32 27-911 11/32
27-904 15/64 27-912 3/8
27-908 1/4 27-914 7/16
27-909 9/32 27-916 1/2
27-910 5/16
Vinyl Roll
29-446

Set 27-945
13 Pc. Full Polish 15° and 80° Ignition Wrench Set
Approximate Weight, 0.92 Ibs.
Product Opening, Product Opening,
Number Inches Number Inches
27-903 13/64 27-909 9/32
27-904 15/64 27-910 5/16
27-907 7/32 27-911 11/32
27-908 1/4 27-912 3/8
Product
Number Description
67-830 Pliers-5" Ignition
58125 Bit Scrdr Phllp 1/4 Dr #1
66-202 Screwdriver
66-924 Screw Starter
2153 Ignition File

Vinyl Roll
29-460

6-62
 6
Open End Wrenches

Set 27-942
9 Pc. Full Polish 15° and 80° Ignition Wrench Set
Approximate Weight, 0.64 Ibs.

Product Opening, Product Opening,

Number Inches Number Inches
27-903 13/64 27-909 9/32
27-907 7/32 27-910 5/16
27-904 15/64 27-911 11/32
27-908 1/4 27-912 3/8
Product
Number Description
67-830 Pliers-5" Ignition

Vinyl Roll
29-444
Industrial Wrenches and Sets

Set 27-943
14 Pc. Full Polish 15° and 80° Miniature Angle
Wrench Set
Approximate Weight, 1.05 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
27-903 13/64 27-911 11/32
27-904 15/64 27-912 3/8
27-906 3/16 27-914 7/16
27-907 7/32 27-916 1/2
27-908 1/4 27-918 9/16
27-909 9/32 27-920 5/8
27-910 5/16

Product
Number Description
67-717 Angle Nose Pliers-5" Ignition

Vinyl Roll
29-460

Set 54-941 METRIC

7 Pc. Full Polish 15° and 80° Miniature Open End
Wrench Set
Approximate Weight, 0.30 lbs. (118 g)
Product Opening, Product Opening,
Number mm Number mm
54-902 5.5 54-909 9
54-906 6 54-910 10
54-907 7 54-911 11
54-908 8
Vinyl Roll
29-434

6-63 Always wear eye protection when near tools in use.

 6
Open End Wrenches

Set 28-155
5 Pc. Full Polish Double Head Flare Nut Wrench Set
Approximate Weight, 2.45 Ibs.
Product Opening, Product Opening,
Number Inches Number Inches
28-130 3/8 x 7/16 28-145* 3/4 x 1
28-135 1/2 x 9/16 28-150* 7/8 x 1-1/8
28-140 5/8 x 11/16
*12 Point
Vinyl Roll
29-420

Set 28-153

Industrial Wrenches and Sets

3 Pc. 6 Point Full Polish Double Head Flare Nut
Wrench Set
Approximate Weight, 2.45 Ibs.
Product Opening,
Number Inches
28-130 3/8 x 7/16
28-135 1/2 x 9/16
28-140 5/8 x 11/16
Vinyl Roll
29-472

Set 28-250
7 Pc. 6 Point Full Polish Combination Flare Nut
Wrench Set
Approximate Weight, 3.60 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
28-212 3/8 28-220 5/8
28-214 7/16 28-222 11/16
28-216 1/2 28-224 3/4
28-218 9/16

Vinyl Roll
29-436

6-64
 6
Open End Wrenches

Full Polish Open End Wrench

A B1 B2 C
Product Opening Weight Overall Head Head Head
Number Inches lbs. Length (in) Width (in) Width (in) Thickness (in)
26-007 3/16 x 1/4 0.02 3.875 0.531 0.453 0.156
26-022 1/4 x 5/16 0.02 3.875 0.672 0.562 0.156
Industrial Wrenches and Sets

26-031 5/16 x 11/32 0.05 4.500 0.812 0.687 0.188

26-034 5/16 x 3/8 0.05 4.500 0.812 0.687 0.203
26-043 3/8 x 7/16 0.07 4.875 0.843 0.968 0.228
26-046 3/8 x 1/2 0.08 5.250 0.875 1.078 0.203
26-058 7/16 x 1/2 0.10 5.625 0.968 1.078 0.218
26-064 7/16 x 9/16 0.13 6.125 0.968 1.234 0.218
26-067 1/2 x 9/16 0.13 6.125 1.078 1.234 0.250
26-079 9/16 x 5/8 0.16 6.625 1.203 1.343 0.265
26-094 5/8 x 11/16 0.21 7.250 1.375 1.500 0.281
26-097 5/8 x 3/4 0.26 7.875 1.343 1.594 0.296
26-106 11/16 x 3/4 0.30 8.562 1.500 1.625 0.312
26-121 3/4 x 13/16 0.41 9.312 1.625 1.750 0.312
26-124 3/4 x 7/8 0.45 9.750 1.625 1.875 0.312
26-133 13/16 x 7/8 0.39 10.250 1.750 1.875 0.312
26-139 7/8 x 15/16 0.54 11.000 1.875 2.000 0.375
26-145 7/8 x 1-1/16 0.83 12.000 1.875 2.250 0.406
26-151 15/16 x 1 0.70 12.000 1.968 2.031 0.406
26-163 1 x 1-1/8 0.78 13.000 2.062 2.375 0.421
26-166 1-1/16 x 1-1/8 1.29 13.000 2.187 2.375 0.421
26-169 1-1/16 x 1-1/4 1.27 14.000 2.281 2.625 0.468
26-172 1-1/8 x 1-1/4 1.22 14.000 2.375 2.562 0.438
26-178 1-1/4 x 1-5/16 2.08 16.375 2.562 2.687 0.490
26-187 1-5/16 x 1-1/2 2.04 16.375 2.703 3.062 0.531
26-190 1-3/8 x 1-7/16 2.05 16.375 2.875 3.062 0.531
26-199* 1-7/16 x 1-5/8 2.67 18.250 2.875 3.187 0.593
26-202* 1-1/2 x 1-5/8 2.61 18.250 2.875 3.187 0.593
ASME B107.6 Fed’I Spec. GGG-W-636e
*Satin Finish

6-65 Always wear eye protection when near tools in use.

 6
Open End Wrenches

Full Polish Open End Wrench METRIC

A B1 B2 C
Product Opening Weight Overall Head Head Head
Number mm g Length (mm) Width (mm) Width (mm) Thickness (mm)
53-009 5 x 5.5 9 98.4 11.5 13.5 3.9
53-016 6x7 9 98.4 11.5 13.5 3.9

Industrial Wrenches and Sets

53-019 7x8 23 98.4 15.1 17.8 3.9
53-022 8x9 23 114.3 17.4 20.6 5.1
53-025 8 x 10 23 114.3 17.4 20.6 5.1
53-034 10 x 11 32 123.8 22.2 24.6 5.1
53-046 11 x 13 45 142.8 24.6 27.4 5.5
53-052 12 x 13 59 155.5 27.4 31.3 6.3
53-055 12 x 14 59 155.5 27.4 31.3 6.3
53-061 13 x 15 73 155.5 27.4 31.3 6.3
53-064 13 x 17 95 168.2 31.3 34.9 6.7
53-067 14 x 15 91 168.2 31.3 34.9 6.7
53-082 16 x 17 91 184.1 34.9 38.1 7.1
53-085 16 x 18 109 200.0 34.9 41.3 7.5
53-091 17 x 19 122 200.0 34.9 41.3 7.5
53-096 18 x 19 113 217.5 38.1 41.3 7.9
53-106 19 x 22 204 247.6 41.3 47.6 7.9
53-115 20 x 22 190 247.6 41.3 47.6 7.9
53-119 21 x 23 254 260.3 43.6 47.6 7.9
53-127 22 x 24 245 279.4 47.6 50.8 9.5
53-142 24 x 26 318 304.8 47.6 57.1 7.9
53-145 24 x 27 376 304.8 47.6 57.1 10.3
53-162 27 x 30 568 355.6 60.3 65.1 11.9
53-175 30 x 32 557 355.6 60.3 65.1 11.9
ASME B107.9m

6-66
 6
Open End Wrenches

Black Oxide Open End Wrench

A B1 B2 C
Product Opening Weight Overall Head Head Head
Number Inches lbs. Length (in) Width (in) Width (in) Thickness (in)
30-734 5/16 x 3/8 0.05 4.500 0.812 0.687 0.203
30-743 3/8 x 7/16 0.06 4.875 0.844 0.968 0.228
30-758 7/16 x 1/2 0.11 5.625 0.968 1.078 0.218
30-767 1/2 x 9/16 0.14 6.125 1.078 1.234 0.250
Industrial Wrenches and Sets

30-779 9/16 x 5/8 0.17 6.625 1.203 1.343 0.265

30-794 5/8 x 11/16 0.23 7.250 1.375 1.500 0.281
30-797 5/8 x 3/4 0.27 7.875 1.343 1.594 0.296
30-806 11/16 x 3/4 0.32 8.562 1.500 1.625 0.312
30-824 3/4 x 7/8 0.44 9.750 1.625 1.875 0.312
30-851 15/16 x 1 0.73 10.875 1.875 1.975 0.375
30-869 1-1/16 x 1-1/4 1.30 14.000 2.062 2.312 0.468
30-872 1-1/8 x 1-1/4 1.38 14.000 2.062 2.312 0.468
30-896 1-7/16 x 1-5/8 2.73 18.250 2.875 3.187 0.593
30-902 1-1/2 x 1-5/8 2.56 18.250 2.875 3.187 0.593
ASME B107.6 Fed’I Spec. GGG-W-636e

Double End Tappet Wrench

A B1 B2 C
Product Opening Weight Overall Head Head Head
Number Inches lbs. Length (in) Width (in) Width (in) Thickness (in)
27-643 3/8 x 7/16 0.15 10.000 0.810 0.930 0.210
27-658 7/16 x 1/2 0.12 10.000 0.930 1.130 0.210
27-667 1/2 x 9/16 0.13 10.000 1.060 1.170 0.210
27-679 9/16 x 5/8 0.20 10.000 1.170 1.310 0.210
27-694 5/8 x 11/16 0.20 10.000 1.310 1.440 0.220
27-724 3/4 x 7/8 0.39 10.000 1.550 1.680 0.220
27-751 15/16 x 1 0.31 9.000 1.840 1.940 0.220
ASME B107.6 Fed’I Spec. GGG-W-636e
Satin Finish Wrenches

6-67 Always wear eye protection when near tools in use.

 6
Open End Wrenches

Full Polish 15° & 60° Open End Angle Wrench

A B1 C
Product Opening Weight Overall Head Head
Number Inches lbs. Length (in) Width (in) Thickness (in)
27-812 3/8 0.08 5.000 0.750 0.203
27-814 7/16 0.12 5.500 0.906 0.250

Industrial Wrenches and Sets

27-816 1/2 0.16 6.062 1.031 0.250
27-818 9/16 0.22 6.500 1.188 0.266
27-820 5/8 0.28 7.062 1.281 0.266
27-822 11/16 0.36 7.500 1.422 0.297
27-824 3/4 0.44 8.000 1.547 0.297
27-826 13/16 0.50 8.562 1.672 0.297
27-828 7/8 0.61 9.125 1.797 0.297
27-830 15/16 0.71 9.750 1.922 0.297
27-832 1 0.88 10.437 1.984 0.328
27-834 1-1/16 1.04 11.187 2.125 0.328
27-836 1-1/8 1.20 11.937 2.281 0.359
27-840 1-1/4 1.47 12.750 2.500 0.359
27-844 1-3/8 2.17 12.500 2.625 0.406
27-846 1-7/16 2.48 12.500 2.625 0.406
27-848 1-1/2 2.77 12.500 2.625 0.406
27-852 1-5/8 3.07 15.875 3.188 0.453
27-854 1-11/16 3.44 16.562 3.313 0.484
27-856 1-3/4 3.81 17.250 3.438 0.500
27-858 1-13/16 4.56 18.000 3.563 0.516
27-860 1-7/8 5.24 18.500 3.688 0.547
27-864 2 5.92 19.250 3.922 0.563
ASME B107.6 Fed’I Spec. GGG-W-636e
Note: 27-812 to 27-840 are full polish finish.
27-844 to 27-864 are satin finish.

6-68
 6
Open End Wrenches

Full Polish 15° & 80° Miniature Angle Wrench

A B1 B2 C
Product Opening Weight Overall Head Head Head
Number Inches lbs. Length (in) Width (in) Width (in) Thickness (in)
27-903 13/64 0.01 3.000 0.500 0.500 0.120
27-906 3/16 0.01 3.000 0.500 0.500 0.115
27-907 7/32 0.01 3.250 0.520 0.520 0.115
27-904 15/64 0.01 3.370 0.540 0.540 0.115
27-908 1/4 0.01 3.500 0.520 0.520 0.115
27-909 9/32 0.02 3.620 0.570 0.570 0.155
27-910 5/16 0.03 3.750 0.620 0.620 0.155
27-911 11/32 0.03 3.870 0.740 0.740 0.155
Industrial Wrenches and Sets

27-912 3/8 0.03 4.000 0.750 0.750 0.155

27-914 7/16 0.07 4.150 0.890 0.890 0.165
27-916 1/2 0.06 4.500 0.968 0.968 0.156
27-918 9/16 0.11 5.437 1.125 1.125 0.156
27-920 5/8 0.10 5.437 1.125 1.125 0.180
ASME B107.6 Fed’I Spec. GGG-W-636e

METRIC
Full Polish 15° & 80° Miniature Angle Wrench
A B1 B2 C
Product Opening Weight Overall Head Head Head
Number mm g Length (mm) Width (mm) Width (mm) Thickness (mm)
54-902 5.5 14 82.6 13.2 13.2 2.9
54-906 6 14 85.6 13.7 13.7 2.9
54-907 7 14 91.9 14.5 14.5 3.9
54-908 8 14 95.3 15.7 15.7 3.9
54-909 9 14 98.3 18.8 18.8 3.9
54-910 10 14 101.6 19.1 19.1 3.9
54-911 11 14 105.4 22.6 22.6 4.2
ASME B107.9m

6-69 Always wear eye protection when near tools in use.

 6
Open End Wrenches

Full Polish Double Head Flare Nut Wrench

A B1 B2 C1 C2 D1 D2
Product Opening Weight Overall Head Head Head Head Slot Slot
Number Inches lbs. Length (in) Width (in) Width (in) Thickness (in) Thickness (in) Width (in) Width (in)
28-130* 3/8 x 7/16 0.12 6.125 0.812 0.890 0.343 0.390 0.265 0.296
28-135* 1/2 x 9/16 0.25 7.500 1.031 1.093 0.406 0.484 0.390 0.453
28-140* 5/8 x 11/16 0.39 8.437 1.093 1.234 0.437 0.500 0.468 0.562
28-145 3/4 x 1 0.61 9.125 1.250 1.593 0.468 0.625 0.578 0.781
28-150 7/8 x 1-1/8 0.90 9.750 1.437 1.750 0.515 0.671 0.703 0.875

Industrial Wrenches and Sets

ASME B107.6 Fed’I Spec. GGG-W-636e
*Wrench has 6-point opening in both ends.

Full Polish Combination Flare Nut Wrench

A B1 B2 C1 C2 D
Product Opening Weight Overall Head Head Head Head Slot
Number Inches lbs. Length (in) Width (in) Width (in) Thickness (in) Thickness (in) Width (in)
28-212 3/8 0.09 5.000 0.900 0.810 0.220 0.340 0.250
28-214 7/16 0.11 5.250 0.970 0.890 0.230 0.390 0.281
28-216 1/2 0.16 6.000 1.100 1.030 0.250 0.410 0.375
28-218 9/16 0.18 6.500 1.200 1.090 0.280 0.440 0.438
28-220 5/8 0.25 7.000 1.310 1.090 0.320 0.440 0.468
28-222 11/16 0.31 8.000 1.440 1.230 0.340 0.470 0.563
28-224 3/4 0.58 9.500 1.580 1.250 0.340 0.470 0.563
28-228 7/8 0.86 12.130 1.820 1.440 0.380 0.520 0.688
ASME B107.6 Fed’I Spec. GGG-W-636e

6-70
 6
Open End Wrenches

6 Point Double Head Flare Nut Wrench

A B1 B2 C1 C2 D1 D2
Product Opening Weight Overall Head Head Head Head Slot Slot
Number Inches lbs. Length (in) Width (in) Width (in) Thickness (in) Thickness (in) Width (in) Width (in)
28-430 3/8 x 7/16 0.13 5.970 0.810 0.730 0.330 0.300 0.266 0.313
28-435 1/2 x 9/16 0.19 6.710 0.950 0.890 0.390 0.360 0.361 0.405
28-440 5/8 x 11/16 0.29 7.560 1.180 1.120 0.450 0.420 0.451 0.517
Industrial Wrenches and Sets

28-442 3/4 x 7/8 0.40 7.560 1.180 1.120 0.450 0.420 0.572 0.646
ASME B107.6 Fed’I Spec. GGG-W-636c

6 Point Double Head Flare Nut Wrench METRIC

A B1 B2 C1 C2 D1 D2
Product Opening Weight Overall Head Head Head Head Slot Slot
Number Inches lbs. Length (mm) Width (mm) Width (mm) Thickness (mm) Thickness (mm) Width (mm) Width (mm)
55-215 9 x 11 0.12 5.960 0.810 0.730 0.330 0.300 0.265 0.317
55-216 11 x 12 0.12 6.500 0.850 0.770 0.340 0.310 0.320 0.364
55-217 13 x 14 0.19 6.700 0.950 0.890 0.390 0.360 0.364 0.410
55-218 15 x 17 0.31 7.570 1.180 1.120 0.450 0.420 0.453 0.490
ASME B107.6 Fed’I Spec. GGG-W-636c

6-71 Always wear eye protection when near tools in use.

 6
Ratcheting Flare Nut Wrenches

Set 28-386
7 Pc. Ratcheting Flare Nut Wrench Set
Approximate Weight, 1.91 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
28-312 3/8 28-320 5/8
28-314 7/16 28-322 11/16
28-316 1/2 28-224 3/4
28-318 9/16

Vinyl Roll
29-436

Industrial Wrenches and Sets

Set 55-386 METRIC
10 Pc. Ratcheting Flare Nut Wrench Set
Approximate Weight, 4.00 lbs. (649 g)
Product Opening, Product Opening,
Number mm Number mm
55-310 10 55-315 15
55-311 11 55-316 16
55-312 12 55-317 17
55-313 13 55-318 18
55-314 14 55-319 19

Vinyl Roll
29-450

Set 55-387 METRIC

5 Pc. Ratcheting Flare Nut Wrench Set
Approximate Weight, 1.40 lbs. (649 g)
Product Opening, Product Opening,
Number mm Number mm
55-310 10 55-313 13
55-311 11 55-314 14
55-312 12

Vinyl Roll
29-420

6-72
 6
Ratcheting Flare Nut Wrenches

Ratcheting Flare Nut Wrench

A B C
Product Opening Weight Overall Head Head
Number Inches lbs. Length (in) Width (in) Thickness (in)
28-312 3/8 0.16 5.410 1.000 0.280
28-314 7/16 0.16 5.410 1.000 0.280
28-316 1/2 0.16 5.410 1.000 0.280
28-318 9/16 0.31 7.250 1.320 0.380
28-320 5/8 0.31 7.250 1.320 0.380
Industrial Wrenches and Sets

28-322 11/16 0.31 7.250 1.320 0.380

28-324 3/4 0.31 7.250 1.320 0.380
28-326 13/16 0.52 9.350 1.670 0.440
28-328 7/8 0.52 9.350 1.670 0.440
28-330 15/16 0.52 9.350 1.670 0.510
28-332 1 0.52 9.350 1.670 0.510

Ratcheting Flare Nut Wrenches METRIC

A B C
Product Opening Weight Overall Head Head
Number mm g Length (mm) Width (mm) Thickness (mm)
55-307 7 73 137.4 25.4 7.1
55-308 8 73 137.4 25.4 7.1
55-309 9 73 137.4 25.4 7.1
55-310 10 73 137.4 25.4 7.1
55-311 11 73 137.4 25.4 7.1
55-312 12 73 137.4 25.4 7.1
55-313 13 73 137.4 25.4 7.1
55-314 14 141 184.2 33.5 9.7
55-315 15 141 184.2 33.5 9.7
55-316 16 141 184.2 33.5 9.7
55-317 17 141 184.2 33.5 9.7
55-318 18 141 184.2 33.5 9.7
55-319 19 141 184.2 33.5 9.7
55-321 21 263 237.5 42.4 11.2
55-322 22 263 237.5 42.4 11.2
55-323 23 263 237.5 42.4 13.0
55-324 24 263 237.5 42.4 13.0

6-73 Always wear eye protection when near tools in use.

 6
Adjustable Wrenches

Set 28-850
3 Pc. Chrome Adjustable Wrench Set
Approximate Weight, 3.10 lbs.
Product Length,
Number Inches
28-408 8
28-410 10
28-412 12
Vinyl Roll
29-474

Industrial Wrenches and Sets

Set 28-855
3 Pc. Cushion Grip Adjustable Wrench Set
Approximate Weight, 3.40 lbs.
Product Length,
Number Inches
28-458 8
28-460 10
28-462 12
Vinyl Roll
29-474

Set 34-850
3 Pc. Black Oxide Adjustable Wrench Set
Approximate Weight, 3.10 lbs.

Product Length,
Number Inches
34-408 8
34-410 10
34-412 12
Vinyl Roll
29-474

6-74
 6
Adjustable Wrenches

Adjustable Wrenches
Product Length, Capacity, Weight,
Number Inches Inches lbs.
28-404 4 1/2 0.12
28-406 6 15/16 0.26
28-408 8 1-1/8 0.54
28-410 10 1-5/16 0.90
28-412 12 1-1/2 1.42
28-415 15 1-11/16 3.37
Industrial Wrenches and Sets

28-418 18 2-1/16 5.56

28-424 24 2-7/16 8.25
ASME B107.8m Fed’I Spec. GGG-W-631b

Adjustable Wrenches, Cushion Grip

Product Length, Capacity, Weight,
Number Inches Inches lbs.
28-454 4 1/2 0.12
28-456 6 3/4 0.26
28-458 8 1 0.55
28-460 10 1-1/8 0.91
28-462 12 1-1/8 1.44
28-465 15 1-11/16 3.42
ASME B107.8m Fed’I Spec. GGG-W-631b

Adjustable Wrenches, Black Oxide

Product Length, Capacity, Weight,
Number Inches Inches lbs.
34-404 4 1/2 0.12
34-406 6 3/4 0.26
34-408 8 1 0.54
34-410 10 1-1/8 0.90
34-412 12 1-1/8 1.42
34-415 15 1-11/16 3.37
34-418 18 2-3/16 5.56
ASME B107.8m Fed’I Spec. GGG-W-665b

6-75 Always wear eye protection when near tools in use.

 6
Pump Wrenches

Thin Pattern Pump Wrenches

A B C
Product Opening Weight Overall Head Head
Number Inches lbs. Length (in) Width (in) Thickness (in)
28-024 3/4 0.22 6.312 1.687 0.250
28-028 7/8 0.21 6.312 1.687 0.250

Industrial Wrenches and Sets

28-030 15/16 0.24 7.062 1.875 0.250
28-032 1 0.22 7.062 1.875 0.250
28-034 1-1/16 0.21 7.062 1.875 0.250
28-036 1-1/8 0.28 7.062 2.062 0.250
28-038 1-3/16 0.28 7.062 2.062 0.250
28-040 1-1/4 0.25 7.062 2.062 0.250
28-042 1-5/16 0.45 7.812 2.500 0.281
28-044 1-3/8 0.42 7.812 2.500 0.281
28-046 1-7/16 0.39 7.812 2.500 0.281
28-048 1-1/2 0.39 7.812 2.500 0.281
28-050 1-9/16 0.46 7.812 2.625 0.281
28-052 1-5/8 0.42 7.812 2.625 0.281
28-056 1-3/4 0.68 8.625 3.125 0.312
28-060 1-7/8 0.58 8.625 3.125 0.312
28-064 2 0.82 8.625 3.500 0.312
28-068 2-1/8 0.70 8.625 3.500 0.312
28-072 2-1/4 0.72 8.625 3.500 0.312
28-076 2-3/8 0.77 8.625 3.500 0.312
28-080 2-1/2 0.75 8.625 3.500 0.312
Fed’I Spec. GGG-W-636e
Openings offset 30°. Heads are polished and mirror-chrome plated; handles are satin finish.

6-76
 6
Structural Wrenches

Structural Wrenches, Black Finish

A B C D1 D2 E F
Product Opening Weight Overall Head Head Large Small Length Offset
Number Inches lbs. Length (in) Width (in) Thickness (in) Dia. Tang (in) Dia. Tang (in) Tang (in) Height (in)
32-520 5/8 0.71 12.125 1.875 0.437 0.625 0.156 7.875 0.875
32-524 3/4 0.69 12.125 1.875 0.437 0.625 0.156 7.875 0.875
32-528 7/8 1.29 14.500 2.187 0.531 0.750 0.187 9.375 1.000
32-530 15/16 1.29 14.500 2.187 0.531 0.750 0.187 9.375 1.000
32-532 1 1.20 14.500 2.187 0.531 0.750 0.187 9.375 1.000
32-534 1-1/16 1.92 17.000 2.437 0.625 0.875 0.218 11.000 1.125
32-536 1-1/8 1.90 17.000 2.437 0.625 0.875 0.218 11.000 1.125
32-540 1-1/4 2.57 19.000 2.750 0.687 0.937 0.250 12.375 1.250
32-542 1-5/16 2.61 19.000 2.750 0.687 0.937 0.250 12.375 1.250
32-546 1-7/16 3.64 21.000 3.125 0.750 1.125 0.281 13.500 1.750
32-548 1-1/2 3.79 21.000 3.125 0.750 1.125 0.281 13.500 1.750
32-552 1-5/8 5.64 23.000 3.625 0.875 1.250 0.312 14.500 1.500
32-558 1-13/16 8.02 25.000 4.437 1.000 1.437 0.437 15.500 1.625
32-560
Industrial Wrenches and Sets

1-7/8 7.86 25.000 4.437 1.000 1.437 0.437 15.500 1.625

32-564 2 7.73 25.000 4.437 1.000 1.437 0.437 15.500 1.625
Fed’I Spec. GGG-W-636e

Structural Box Wrenches Black Finish, 12 Point Lobular Opening

A B C D1 D2 E F
Product Opening Weight Overall Head Head Large Small Length Offset
Number Inches lbs. Length (in) Width (in) Thickness (in) Dia. Tang (in) Dia. Tang (in) Tang (in) Height (in)
32-728 7/8 0.74 12.000 1.375 0.625 0.750 0.187 7.625 1.125
32-730 15/16 1.03 13.500 1.562 0.750 0.750 0.187 8.500 1.125
32-732 1 0.91 13.500 1.562 0.750 0.750 0.187 8.500 1.250
32-734 1-1/16 1.40 14.750 1.687 0.812 0.875 0.187 9.375 1.312
32-736 1-1/8 1.38 14.750 1.687 0.812 0.875 0.187 9.375 1.312
32-740 1-1/4 2.22 17.000 2.000 0.875 0.937 0.187 11.250 1.437
32-742 1-5/16 2.14 17.000 2.000 0.875 0.937 0.187 11.250 1.437
32-746 1-7/16 3.49 21.000 2.218 1.000 1.125 0.281 13.625 1.500
32-748 1-1/2 3.47 21.000 2.218 1.000 1.125 0.281 13.625 1.500
32-752 1-5/8 4.97 21.500 2.500 1.062 1.250 0.312 13.625 1.625
32-758 1-13/16 5.76 23.000 2.750 1.125 1.375 0.437 14.500 1.687
32-760 1-7/8 5.64 23.000 2.750 1.125 1.375 0.437 14.500 1.687
32-764 2 6.91 24.500 3.000 1.250 1.437 0.437 15.000 1.812
Fed’I Spec. GGG-W-636e

6-77 Always wear eye protection when near tools in use.

 6
Construction, Striking Wrenches

Construction Wrenches, Black Finish

A B C D1 D2 E
Product Opening Weight Overall Head Head Large Small Length
Number Inches lbs. Length (in) Width (in) Thickness (in) Dia. Tang (in) Dia. Tang (in) Tang (in)
32-820 5/8 0.56 12.000 1.656 0.437 0.562 0.156 6.750
32-822 11/16 0.55 12.000 1.656 0.437 0.562 0.156 6.750
32-824 3/4 0.55 12.000 1.656 0.437 0.562 0.156 6.750
32-828 7/8 1.16 14.500 2.062 0.531 0.750 0.187 7.875
32-830 15/16 1.16 14.500 2.062 0.531 0.750 0.187 7.875
32-832 1 1.14 14.500 2.062 0.531 0.750 0.187 7.875
32-834 1-1/16 1.94 17.000 2.437 0.625 0.875 0.218 9.250
32-836 1-1/8 1.71 17.000 2.437 0.625 0.875 0.218 9.250
32-840 1-1/4 2.55 19.000 2.812 0.687 0.937 0.250 10.500
32-842 1-5/16 2.37 19.000 2.812 0.687 0.937 0.250 10.250
32-846 1-7/16 3.53 21.000 3.250 0.750 1.125 0.281 11.500
32-848 1-1/2 3.55 21.000 3.250 0.750 1.125 0.281 11.500
32-852 1-5/8 5.37 23.000 3.625 0.843 1.250 0.312 12.500
32-858 1-3/16 7.74 25.000 4.437 0.937 1.375 0.437 13.500

Industrial Wrenches and Sets

32-860 1-7/8 7.58 25.000 4.437 0.937 1.375 0.437 13.500
32-864 2 7.95 25.000 4.437 0.937 1.375 0.437 13.500
Fed’I Spec. GGG-W-636e

Adjustable Construction Wrench

Head is offset 15° from centerline, black finish.
Product Overall Capacity Weight
Number Length (in) Inches lbs.
32-495 15.000 1-1/2 2.30
Fed’I Spec. GGG-W-631b

12 Point 45° Offset Striking Wrenches

A B C D E F G
Product Opening Weight Overall Head Head Handle Handle Handle Offset
Number Inches lbs. Length (in) Diameter (in) Thickness (in) Width (in) Height (in) Length (in) Height (in)
33-034 1-1/16 1.99 10.500 1.750 0.750 1.125 1.125 3.125 1.250
33-036 1-1/8 1.96 10.500 1.750 0.750 1.125 1.125 3.125 1.250
33-038 1-3/16 2.37 11.000 2.062 0.812 1.187 1.125 3.187 1.437
33-040 1-1/4 2.37 11.000 2.062 0.812 1.187 1.125 3.187 1.437
33-042 1-5/16 2.35 11.000 2.062 0.812 1.187 1.125 3.187 1.437
33-044 1-3/8 3.52 11.750 2.187 1.000 1.343 1.343 3.375 1.500
33-046 1-7/16 3.52 11.750 2.187 1.000 1.343 1.343 3.375 1.500
33-048 1-1/2 3.56 11.750 2.187 1.000 1.343 1.343 3.375 1.500
33-052 1-5/8 4.17 12.000 2.593 1.062 1.625 1.375 3.250 1.625
33-054 1-11/16 4.07 12.000 2.593 1.062 1.625 1.375 3.250 1.625
33-056 1-3/4 4.93 12.500 2.812 1.062 1.937 1.500 3.375 1.750
33-058 1-13/16 4.89 12.500 2.812 1.125 1.937 1.500 3.375 1.750
33-060 1-7/8 4.90 12.500 2.812 1.125 1.937 1.500 3.375 1.750
33-062 1-15/16 5.72 13.250 3.125 1.250 1.937 1.500 3.687 1.875
33-064 2 5.70 13.250 3.125 1.250 1.937 1.500 3.687 1.875
33-068 2-1/8 5.64 13.500 3.500 1.375 2.000 1.500 3.875 2.125
33-070 2-3/16 7.06 13.500 3.500 1.375 2.000 1.500 3.875 2.125
33-072 2-1/4 7.00 13.500 3.500 1.375 2.000 1.500 3.875 2.125
33-074 2-5/16 8.20 14.000 3.656 1.562 2.125 1.625 4.250 2.125
33-076 2-3/8 8.12 14.000 3.656 1.562 2.125 1.625 4.250 2.125
33-080 2-1/2 8.56 14.750 3.875 1.500 2.156 1.625 4.250 2.437
33-082 2-9/16 8.52 14.750 3.875 1.500 2.156 1.625 4.250 2.437
33-084 2-5/8 8.49 14.750 3.875 1.500 2.156 1.625 4.250 2.437
33-088 2-3/4 12.10 16.000 4.437 1.875 2.250 1.687 4.625 2.437
33-092 2-7/8 12.01 16.000 4.437 1.875 2.250 1.687 4.625 2.437
33-094 2-15/16 11.53 16.000 4.437 1.875 2.250 1.687 4.625 2.437
33-096 3 14.17 16.500 5.000 2.000 2.375 1.750 4.875 2.750
33-100 3-1/8 14.87 16.500 5.000 2.000 2.375 1.750 4.875 2.750
Fed’I Spec. GGG-W-636e

6-78
 6
Striking, Slugging Wrenches

12 Point 45° Offset Striking Wrenches METRIC

A B C D E F G
Product Opening Weight Overall Head Head Handle Handle Handle Offset
Number mm g Length (mm) Diameter (mm) Thickness (mm) Width (mm) Height (mm) Length (mm) Height (mm)
59-032 32 1066 279.4 52.3 20.6 30.1 28.5 80.9 36.5
59-036 36 1610 298.4 55.5 25.4 34.1 34.1 85.7 38.1
59-041 41 1869 304.8 65.9 26.9 34.9 33.3 82.5 41.2
59-046 46 2227 317.5 71.4 28.6 41.2 39.6 85.7 44.4
59-050 50 2586 336.5 79.4 31.7 39.6 38.1 93.6 47.6
59-055 55 3193 342.9 88.9 34.9 44.4 38.1 98.4 53.9
59-060 60 3701 355.6 92.9 39.7 47.6 41.2 107.9 53.9
59-065 65 3869 374.6 98.4 38.1 47.6 41.2 107.9 61.8
59-070 70 5479 406.4 112.7 47.6 49.2 42.8 117.4 61.8
59-075 75 5235 406.4 112.7 47.6 49.2 42.8 117.4 61.8
59-080 80 6518 418.8 126.9 50.7 60.2 44.4 123.7 69.8
Industrial Wrenches and Sets

12 Point Straight Pattern Slugging Wrenches

A B C D E F G
Product Opening Weight Overall Head Head Handle Handle Handle Offset
Number mm lbs. Length (in) Diameter (in) Thickness (in) Width (in) Height (in) Length (in) Height (in)
33-340 1-1/4 1.20 7.000 2.125 0.813 1.313 0.625 1.500 -
33-342 1-5/16 1.12 7.000 2.125 0.813 1.313 0.625 1.500 -
33-344 1-3/8 1.73 8.250 2.313 0.938 1.437 0.625 1.750 -
33-346 1-7/16 1.69 8.250 2.313 0.938 1.437 0.625 1.750 -
33-348 1-1/2 1.66 8.250 2.313 0.938 1.437 0.625 1.750 -
33-352 1-5/8 2.36 9.125 2.500 1.125 1.687 0.875 2.000 -
33-354 1-11/16 2.30 9.000 2.563 1.125 1.625 0.813 1.875 -
33-356 1-3/4 3.77 9.000 2.563 1.125 1.625 0.813 1.875 -
33-358 1-13/16 3.68 10.000 2.938 1.250 2.000 0.875 2.250 -
33-360 1-7/8 3.57 10.000 2.938 1.250 2.000 0.875 2.250 -
33-364 2 4.75 11.000 3.313 1.375 2.125 1.125 2.500 -
33-366 2-1/16 4.62 11.000 3.313 1.375 2.125 1.125 2.500 -
33-368 2-1/8 6.41 12.000 3.688 1.437 2.500 1.125 2.750 -
33-370 2-3/16 6.36 12.000 3.688 1.437 2.500 1.125 2.750 -
33-372 2-1/4 6.34 12.000 3.688 1.437 2.500 1.125 2.750 -
33-376 2-3/8 9.40 13.500 3.813 1.625 2.625 1.250 3.250 -
33-378 2-7/16 9.40 13.500 3.813 1.625 2.625 1.250 3.250 -
33-380 2-1/2 8.15 14.000 4.188 1.750 2.688 1.313 3.250 -
33-382 2-9/16 8.10 14.000 4.188 1.750 2.688 1.313 3.250 -
33-384 2-5/8 7.30 14.000 4.188 1.813 2.688 1.313 3.250 -
33-388 2-3/4 13.67 15.500 4.625 1.875 2.938 1.563 3.750 -
33-390 2-13/16 13.63 15.500 4.625 1.875 2.938 1.563 3.750 -
33-394 2-15/16 12.65 15.500 4.625 1.875 2.938 1.563 3.750 -
33-396* 3 18.52 18.000 5.250 2.000 3.625 1.625 4.000 -
33-400* 3-1/8 18.38 18.000 5.250 2.000 3.625 1.625 4.000 -
33-408* 3-3/8 18.38 18.000 5.250 2.000 3.625 1.625 4.000 -
33-412* 3-1/2 17.08 18.000 5.250 2.000 3.625 1.625 4.000 -
33-420* 3-3/4 21.50 19.000 6.000 2.250 3.750 1.750 4.000 -
33-424* 3-7/8 22.00 19.000 6.000 2.250 3.750 1.750 4.000 -
33-432* 4-1/8 26.00 19.500 6.625 2.437 3.875 1.750 4.250 -
33-436* 4-1/4 22.50 19.500 6.625 2.437 3.875 1.750 4.250 -
33-444* 4-1/2 32.50 21.000 7.000 2.750 4.000 1.937 5.000 -
33-448* 4-5/8 31.50 21.000 7.000 2.750 4.000 1.937 5.000 -
33-452† 4-3/4 40.00 24.000 7.625 2.000 3.875 2.000 3.437 -
33-460† 5 44 00 25.000 8.000 2.000 4.000 2.000 3.500 -
33-468† 5-1/4 46.00 26.000 8.250 2.000 3.250 2.000 2.875 -
33-472† 5-3/8 50.50 27.000 8.750 2.000 3.750 2.000 3.625 -
33-476† 5-1/2 54.00 28.000 8.875 2.000 3.500 2.000 3.125 -
33-484† 5-3/4 57.00 28.563 9.125 2.000 4.375 2.000 3.750 -
33-492† 6 61.50 30.000 9.250 2.000 3.750 2.000 3.125 -
Fed’I Spec. GGG-W-636e
*Drop Forged from Carbon Steel
†Flame-cut opening, made from Carbon Steel

6-79 Always wear eye protection when near tools in use.

 6
Slugging Wrenches

6 Point Straight Pattern Slugging Wrenches

A B
Product Opening Weight Overall Head
Number Inches lbs. Length (in) Diameter (in)
33-534 1-1/16 1.90 9.875 1.781
33-540 1-1/4 2.10 10.250 2.000
33-546 1-7/16 2.60 10.563 2.266
33-552 1-5/8 2.90 11.000 2.484
33-558 1-13/16 3.50 11.313 2.656
33-564 2 4.00 11.688 3.031
33-570 2-3/16 5.20 12.000 3.281
33-576 2-3/8 6.00 12.375 3.406
33-582 2-9/16 6.60 12.688 3.750
33-588 2-3/4 7.50 13.063 4.172
33-594 2-15/16 7.90 13.438 4.359
33-600 3-1/8 9.40 13.813 4.484
33-612 3-1/2 10.50 14.125 4.969
33-624 3-7/8 13.30 14.500 5.547

Industrial Wrenches and Sets

Fed’I Spec. GGG-W-636e

12 Point Straight Pattern Slugging Wrenches METRIC

A B C D E F
Product Opening Weight Overall Head Head Handle Handle Handle
Number mm g Length (mm) Diameter (mm) Thickness (mm) Width (mm) Height (mm) Length (mm)
59-332 32 544 177.8 52.4 20.6 33.3 15.9 38.1
59-336 36 761 209.5 58.7 23.8 36.5 15.9 44.4
59-341 41 1069 228.6 63.5 28.6 41.3 20.6 47.6
59-346 46 1653 254.4 74.6 31.7 50.8 22.2 57.1
59-350 50 2161 279.4 84.1 34.9 53.9 28.5 63.5
59-355 55 2881 304.8 93.6 36.5 63.5 28.5 69.8
59-360 60 4281 342.9 96.8 41.3 68.2 41.3 90.5
59-365 65 4951 355.6 104.8 46.0 68.2 33.3 82.5
59-370 70 6193 393.7 117.5 47.6 74.6 39.7 95.2
59-375 75 8390 457.2 130.2 50.8 82.5 41.3 120.6
59-380 80 8340 457.2 130.2 50.8 82.5 41.3 120.6

6-80
 6
Spanner Wrenches

Face Spanner Wrenches

Pin Specifications
Distance
Product C to C Diameter Height Length Weight
Number Inches Inches Inches Inches lbs.
34-101 1.000 0.187 0.187 4.500 0.11
34-104 1.250 0.218 0.218 5.000 0.14
34-107 1.500 0.218 0.218 5.500 0.18
34-110 1.750 0.218 0.218 6.000 0.27
34-113 2.000 0.750 0.750 6.500 0.35
34-116 2.250 0.750 0.750 7.000 0.40
34-119 2.500 0.281 0.281 7.500 0.51
34-121 2.750 0.281 0.281 8.000 0.57
34-124 3.000 0.312 0.312 8.500 0.57
34-127 3.250 0.312 0.312 9.125 0.73
34-130 3.500 0.312 0.312 9.750 0.73
34-133 3.750 0.375 0.375 10.375 0.90
Industrial Wrenches and Sets

34-136 4.000 0.375 0.375 11.000 0.97

Fed’I Spec. GGG-W-665b

Adjustable Face Spanner Wrenches

Pin Specifications
Extreme
Product Capacity Diameter Height Length Weight
Number Inches Inches Inches Inches lbs.
34-151 2.000 0.187 0.125 6.375 0.32
34-154 3.000 0.250 0.187 8.250 0.57
34-157 4.000 0.312 0.250 10.375 0.99
Fed’I Spec. GGG-W-665b

Pin Spanner Wrenches

Pin Specifications
For Circle
Product Diameter Diameter Height Length Weight
Number Inches Inches Inches Inches lbs.
34-201 1.000 0.187 0.156 4.000 0.09
34-204 1.250 0.203 0.156 4.500 0.12
34-207 1.500 0.218 0.187 5.000 0.14
34-210 1.750 0.234 0.187 5.500 0.22
34-213 2.000 0.250 0.218 6.000 0.27
34-216 2.250 0.265 0.250 6.500 0.30
34-219 2.500 0.281 0.281 7.000 0.57
34-222 2.750 0.296 0.281 7.500 0.45
34-225 3.000 0.312 0.281 8.000 0.59
34-228 3.250 0.328 0.281 8.500 0.60
34-231 3.500 0.343 0.312 9.000 0.77
34-234 3.750 0.359 0.343 9.500 0.95
34-237 4.000 0.375 0.343 10.000 1.12
34-240 5.000 0.437 0.406 12.000 1.58
34-243 6.000 0.500 0.562 14.000 2.46
Fed’I Spec. GGG-W-665b

6-81 Always wear eye protection when near tools in use.

 6
Spanner, Check Nut Wrenches

Adjustable Hook Spanner Wrenches

Capacity Hook Specifications
Range for
Product Diameters Thickness Depth Length Weight
Number Inches Inches Inches Inches lbs.
34-301 3/4 - 2 0.343 0.125 6.375 0.27
34-305 1-1/4 - 3 0.406 0.156 8.125 0.53
34-307 2 - 4-3/4 0.468 0.187 11.375 1.06
34-310 4-1/2 - 6-1/4 0.468 0.250 12.375 1.23
34-313 6-1/8 - 8-3/4 0.468 0.312 13.750 1.36
Fed’I Spec. GGG-W-665b

Set 34-376
4 Pc. Hook Spanner Set
Contents: 4 Adjustable Hook Spanners in cardboard box.

Industrial Wrenches and Sets

Approximate Weight, 3.10 Ibs.
Product Capacity
Number Inches
34-301 3/4 - 2
34-305 1-1/4 - 3
34-307 2 - 4-3/4
34-310 4-1/2 - 6-1/4

Adjustable Pin Spanner Wrenches

Capacity Pin Specifications
Range for Hook
Product Diameters Thickness Diameter Height Length Weight
Number Inches Inches Inches Inches Inches lbs.
34-351 3/4 - 2 0.343 0.125 0.125 6.375 0.27
34-354 3/4 - 2 0.343 0.187 0.156 6.375 0.27
34-358 1-1/4 - 3 0.406 0.187 0.187 8.125 0.53
34-361 1-1/4 - 3 0.406 0.250 0.218 8.125 0.49
34-363 2 - 4-3/4 0.468 0.250 0.250 11.375 1.07
34-366 4-1/2 - 6-1/4 0.468 0.375 0.250 12.375 1.20
Fed’I Spec. GGG-W-665b

Thin Pattern Check Nut Wrenches, Carbon Steel

A B C
Product Opening Weight Overall Head Head
Number Inches lbs. Length (in) Width (in) Thickness (in)
31-314 7/16 0.07 3.937 1.125 0.156
31-316 1/2 0.06 3.937 1.125 0.156
31-318 9/16 0.06 4.437 1.187 0.171
31-320 5/8 0.12 5.125 1.468 0.187
31-322 11/16 0.13 5.125 1.468 0.187
31-324 3/4 0.21 6.000 1.687 0.218
Fed’I Spec. GGG-W-636e

6-82
 6
Single Head Open End Wrenches

Single Head Open End Wrench

A B C
Product Opening Weight Overall Head Head
Number Inches lbs. Length (in) Width (in) Thickness (in)
31-008 1/4 0.05 3.500 0.750 0.187
31-010 5/16 0.04 3.500 0.750 0.187
31-012 3/8 0.09 4.000 0.875 0.266
31-014 7/16 0.14 4.500 1.062 0.312
31-016 1/2 0.13 4.500 1.062 0.312
Industrial Wrenches and Sets

31-018 9/16 0.19 5.625 1.250 0.375

31-022 11/16 0.34 6.500 1.437 0.406
31-024 3/4 0.42 7.250 1.563 0.437
31-028 7/8 0.67 8.250 1.875 0.469
31-030 15/16 0.84 9.000 2.125 0.562
31-032 1 0.83 9.000 2.125 0.562
31-034 1-1/16 1.26 10.500 2.312 0.625
31-036 1-1/8 1.33 10.500 2.312 0.625
31-040 1-1/4 2.01 11.750 2.812 0.640
31-044 1-3/8 1.91 11.750 2.812 0.688
31-046 1-7/16 2.95 13.500 3.312 0.812
31-048 1-1/2 2.59 13.500 3.312 0.812
31-052 1-5/8 3.70 15.500 3.500 0.812
31-058 1-13/16 4.68 17.000 4.250 0.938
31-064 2 6.22 19.000 4.750 1.000
31-070 2-3/16 8.77 21.000 4.875 1.125
31-072 2-1/4 8.31 21.000 4.875 1.125
31-076 2-3/8 10.22 23.000 5.750 1.125
31-078 2-7/16 10.45 23.000 5.750 1.125
31-082 2-9/16 15.06 25.000 6.250 1.250
31-084* 2-5/8 14.85 25.000 6.250 1.250
31-088* 2-3/4 15.82 27.000 6.625 1.375
31-094* 2-15/16 15.21 27.000 6.625 1.375
31-096* 3 21.25 30.000 7.500 1.437
ASME B107.6 Fed’I Spec. GGG-W-636e
*Carbon Steel.

6-83 Always wear eye protection when near tools in use.

 6
Pipe Tools

Pipe Wrenches
Designed to provide maximum strength and safety while weight is minimized. Handles are
made from pearlitic malleable alloy. Hook jaw is drop forged while insert jaw is replaceable.
Hook jaw calibrations, spring suspension, and easily-spinning adjusting nut ensure quick
adjustment, and instant gripping and release of pipe. Housing and handle finished in bright
red baked-on enamel.
Capacity,
Product Length Pipe size Weight,
Number Inches Inches lbs.
73-006 6.000 0.125 - 0.750 0.45
73-008 8.000 0.125 - 1.000 0.91
73-010 10.000 0.125 - 1.500 1.80
73-012 12.000 0.125 - 2.000 2.83
73-014 14.000 0.250 - 2.000 3.70
73-018 18.000 0.250 - 2.500 6.14
73-024 24.000 0.250 - 3.000 9.64
73-036 36.000 0.250 - 4.500 19.50

Industrial Wrenches and Sets

73-048 48.000 1.000 - 6.000 34.01
Fed’I Spec. GGG-W-651e

Aluminum Handle Pipe Wrenches

Nearly 40% lighter than comparable cast-iron wrenches of the same size. With identical
jaws as their iron counterparts.
Product Length Pipe Capacity Weight
Number Inches Inches lbs.
74-010 10.000 1.500 1.25
74-014 14.000 2.000 2.00
74-018 18.000 2.500 3.50
74-024 24.000 3.000 5.75
74-036 36.000 5.000 10.00
74-048 48.000 6.000 17.00

Flange Jacks
For separating flanges without disassembly of pipe lines when gaskets are to be replaced.
Flange Jacks exert tremendous pressure smoothly and evenly, with no shock along the pipe
line. Flanges are separated quickly and held in perfect alignment. Flange jacks must be used
in pairs for even distribution of pressure.
Cap., Standard Raised Face Flanges, Inches Wt.
Product 125 Lb. 150 Lb. 250 Lb. 300 Lb. Per Pair, Screw
Number Cast Iron Steel Cast Iron Steel lbs. Length
73-305 2.000 - 20.000 2.000 - 20.000 1.000 - 12.000 0.750 - 12.000 13.00 6.750
73-310 16.000 - 48.000 18.000 - 24.000 12.000 - 30.000 12.000 - 24.000 45.00 10.500

6-84
 6
Pipe Tools

Chain Pipe Tongs

All components of Armstrong Chain Tongs are chosen to provide a durable, long-lasting
tool, strong beyond need, and with the professional appearance experienced users expect
from their pipe tools.
JAWS
Drop forged from alloy steel, chain tong jaws are carefully milled and heat treated. They are
tested for strength and wearability and finished in a bright red baked-on enamel. Pipe
capacity, in both inches and millimeters, is forged into sides of each jaw.
HANDLES
Only selected alloy steel is used to provide the correct degree of stiffness without risking
brittleness. After forging, handles are grit blasted and oil coated.
CHAIN
Flat link chains, the key to any top quality tong, are manufactured in our own plant. After
careful heat treating, they are proof-tested under quality control. Each chain is shipped with
a seal indicating it has been tested to 2/3 of its cataloged breaking strain.
Industrial Wrenches and Sets

Tongs with Single End Jaws

The favorite style for general, all-around use, these tongs feature an extra large hardened
steel bolt. The connecting link is drop forged from alloy steel.
Tool Chain Breaking
Product For Pipe Size, Length Length Strain Weight
Number Inches mm Inches Inches lbs. lbs.
73-205 0.250 - 2.500 13.0 - 73.0 27.000 17.500 13,800 9.46
73-207 0.750 - 4.000 26.0 - 114.0 37.000 22.500 17,600 16.45
73-209 1.000 - 6.000 33.0 - 168.0 43.000 32.000 20,100 23.00
73-211 1.500 - 8.000 48.0 - 219.0 51.000 40.500 22,000 31.50
Fed’I Spec. GGG-W-651e

Tongs with Double End Jaws

The double end jaws make this style tong the most economical in our line. If teeth become
burred or dull from long use, simply reverse them end for end. This feature doubles the life
of the tool.
Tool Chain Breaking
Product For Pipe Size, Length Length Strain Weight
Number Inches mm Inches Inches lbs. lbs.
73-229 0.250 - 2.500 13.0 - 73.0 27.000 17.500 13,800 9.29
73-231 0.750 - 4.000 26.0 - 114.0 37.000 22.500 17,600 17.28
73-233 1.000 - 6.000 33.0 - 168.0 43.000 32.000 20,100 24.00
73-235 1.500 - 8.000 48.0 - 219.0 50.500 40.500 22,000 32.00
73-237 2.000 - 12.000 60.0 - 323.0 64.250 55.500 31,000 56.00
Fed’I Spec. GGG-W-651e

Chain Wrenches
An economical tool for use where working area is restricted, or when the high breaking
strains of chain tongs are unnecessary. Successive “bites” can be taken without removing
tool from the pipe. Handles are chrome plated.
Product For Pipe Tool Length Chain Length Weight
Number Size Inches Inches Inches lbs.
73-295* 0.375 - 4.000 11.000 15.500 1.45
73-299* 3.000 - 6.000 20.000 23.500 4.80
*Chain is imported

6-85 Always wear eye protection when near tools in use.

 TORQUE TOOLS 7
Electronic Torque Wrenches
Micrometer Adjustable Torque Wrenches
STRENGTH
Enclosed head design seals Flex Head Micrometer Adjustable
out contaminants for improved STRENGTH Torque Wrenches
performance and life Torque wrap design reduces stress
on gear and pawl teeth
Torque Screwdrivers
Dial Torque Wrenches
Deflecting Beam Torque Wrenches
SAFETY
Rubber seal between ratchet head and Torque Wrench Replacement Heads
tube keeps lubrication in and contaminants
out of the torque mechanism, assuring
Torque Wrench Adapters
accuracy and repeatability Torque Multipliers
Electronic Torque Testers

ACCESS
Interchangable heads available SPEED & SAFETY
Detent locking ring allows easy setting
of desired torque and prevents accidental
change of torque setting during use

SAFETY
Lightly knurled and grooved handles
SAFETY provide non-slip grip and comfort
Single pawl, double-tooth design
will not operate in neutral position

SAFETY
Innovative linear ball-bearing system
eliminates friction between the spring
and case for greater accuracy and repeatability
Produces a crisp audible “click”
over entire torque range
 7
Electronic Torque Wrenches

STRENGTH
Thin profile sealed tear drop ratchet head
for better access, increased strength and
improved dirt infiltration

PRODUCTIVITY
Torque Tools

LCD Screen with Backlight for easy reading of torque

values enclosed in a shock resistant housing
Convert Units (ft.lb., in.lb., N.m.)

ACCURACY
+/- 2% CW, +/- 3% CCW from 20% to 100%
of rated capacity ASME B107.28 - 2005
Certificate included

PRODUCTIVITY
60 tooth gear with 6˚
ratcheting arc

7-1 Always wear eye protection when near tools in use.

 7
Electronic Torque Wrenches

INNOVATION
Buzzer and Red, Yellow, Green
lights to alert user when target
torque is reached

DESIGN
Knurled Aluminum Grip
to resist slipping

PRODUCTIVITY
Four Simple Buttons:
- Power (ON/OFF)
- Unit (Convert Units)
- Torque Target UP
- Torque Target DOWN DESIGN
Operates on 4 AAA Alkaline
batteries for up to 40 hours
of continuous operation

Torque Tools
3/8" Drive Electronic Torque Wrench
Product PRIMARY SCALE Head Head Head Thickness (in.) Length, Weight Ratchet
Number Range Incr. Width (in.) Length (in.) less tang with tang Inches lbs. Rep. Kit
10-100 ft.lb. 1 ft.lb.
64-534 120-1200 in.lb. 1 in.lb. 1.240 2.300 0.480 0.960 17.750 3.20 11-982
13.6-135.6 N.m. 1 N.m.
ASME B107.28 Certificate included

1/2" Drive Electronic Torque Wrench

Product PRIMARY SCALE Head Head Head Thickness (in.) Length, Weight Ratchet
Number Range Incr. Width (in.) Length (in.) less tang with tang Inches lbs. Rep. Kit
25-250 ft.lb. 1 ft.lb.
64-544 300-3000 in.lb. 1 in.lb. 1.810 2.930 0.650 1.310 26.500 4.80 12-982
33.9-339 N.m. 1 N.m.
ASME B107.28 Certificate included

7-2
 7
Micrometer Torque Wrenches

Armstrong Torque Wrenches offer precise torque application in an easy-to-use durable design
Armstrong Micrometer "Click" style torque wrenches are forged, heat treated, and assembled in the USA using high alloy, domestically
produced steel. Manufactured to rigid specifications ensures torque wrenches are of unequaled strength, durability, and accuracy.

10˚ Ratcheting angle permits

use in confined areas

Rubber seal keeps lubrication

in, contaminants out of torque
mechanism assuring accuracy Sturdy blow-mold storage case
of +/- 3% and repeatability provides long-term protection

Chrome-plated, hardened steel

body for strength and durability
Torque Tools

INNOVATIVE LINEAR BALL BEARING SYSTEM

- Eliminates friction between the spring and case for
greater accuracy and repeatability
* Now Available:
Interchangeable Heads - Eliminates speed sensitivity errors
- Produces a “Crisp, Audible Click” over the
entire torque range

Easy to Read Dual Scales

- Primary scale in SAE
- Secondary scale in Metric

Detent-style locking collar

prevents the accidental
Torque Wrench
Tubes change of settings

Torque Screwdriver
Lightly knurled & grooved
• Torque Screwdriver models have an accuracy
+/- 6% clockwise (20-100% of full range). handle provides a
• Clutch type release mechanism prevents overtorquing. comfortable, non-slip grip
Includes - 1/4" female hex adapter.
• Available in Pre-Set - Special Order.

Micrometer Torque Wrenches

ACCURACY OF +/-3% CLOCKWISE (20-100% OF FULL RANGE) OPERATING / DESIGN CAPABILITIES
• Provides precise torque application (Counterclockwise • Innovative linear ball bearing mechanism
calibration available on special order) - Assures superior accuracy and repeatability by eliminating friction between the
spring and case; Eliminates speed sensibility errors
HEAD DESIGN SPECIFICALLY FOR TORQUE WRENCHES - Produces a crisp, audible click over the entire torque range
• Enclosed Head • Rubber seal between ratchet head and tube
- Seals out dirt and contaminants - Keeps lubrication in, dirt and contaminants out assuring accuracy and repeatability
• Torque Wrap Design • Detent-style locking collar
- Reduces stress on gear teeth and pawls for longer life - Allows for ease in setting desired torque; Prevents the accidental change of settings
• 10° ratcheting angle • Handles are lightly knurled and grooved; Provides comfortable, non-slip grip
- Permits use in confined areas

7-3 Always wear eye protection when near tools in use.

 7
Micrometer Torque Wrenches

1/4" Drive Micrometer Adjustable Torque Wrenches, Ratchet Head

Product Certified PRIMARY SCALE ALTERNATE SCALE Head Head Head Thickness (in.) Length, Weight Ratchet Blow Mold
Number Model No. Range Incr. Range Incr. Width (in.) Length (in.) less tang with tang Inches lbs. Rep. Kit Case
64-031 64-931 5-50 in.lb. 1 in.lb. 0.58-6.21 N.m. 0.11 N.m. 1.063 1.672 0.469 0.813 8.000 0.71 64-036 64-293
64-032 64-932 30-200 in.lb. 1 in.lb. 4-23 N.m. 0.11 N.m. 1.063 1.672 0.469 0.813 9.500 0.76 64-036 64-293
64-038 64-938 4-25 N.m. 0.1 N.m. — — 1.063 1.672 0.469 0.813 9.500 0.76 64-036 64-293
ASME B107.14M ISO 6789

3/8" Drive Micrometer Adjustable Torque Wrenches, Ratchet Head

Product Certified PRIMARY SCALE ALTERNATE SCALE Head Head Head Thickness (in.) Length, Weight Ratchet Blow Mold
Number Model No. Range Incr. Range Incr. Width (in.) Length (in.) less tang with tang Inches lbs. Rep. Kit Case
64-041 64-941 50-250 in.lb. 1 in.lb. 6-29 N.m. 0.11 N.m. 1.063 1.672 0.469 0.969 9.500 0.76 64-077 64-293
64-042 64-942 100-1000 in.lb. 5 in.lb. 14-116 N.m. 0.6 N.m. 1.500 2.125 0.563 1.063 17.100 2.05 64-078 64-295
64-046 64-946 10-100 ft.lb. 0.5 ft.lb. 17-139 N.m. 0.7 N.m. 1.500 2.125 0.563 1.063 17.100 2.05 64-078 64-295
64-049 64-949 10-100 N.m. 1 N.m. — — 1.500 2.125 0.563 1.063 17.100 2.05 64-078 64-295
ASME B107.14M ISO 6789

Torque Tools
1/2" Drive Micrometer Adjustable Torque Wrenches, Ratchet Head
Product Certified PRIMARY SCALE ALTERNATE SCALE Head Head Head Thickness (in.) Length, Weight Ratchet Blow Mold
Number Model No. Range Incr. Range Incr. Width (in.) Length (in.) less tang with tang Inches lbs. Rep. Kit Case
64-081 64-981 240-1800 in.lb. 12 in.lb. 34-210 N.m. 1.4 N.m. 1.750 3.125 0.766 1.438 20.500 2.45 64-092 64-297
64-082 64-982 300-3000 in.lb. 18 in.lb. 43-348 N.m. 2.03 N.m. 1.750 3.125 0.766 1.438 20.500 2.45 64-092 64-297
64-084 64-984 10-100 ft.lb. 0.5 ft.lb. 17-139 N.m. 0.7 N.m. 1.500 2.125 0.563 1.250 17.100 2.05 64-091 64-295
64-085 64-985 10-150 ft.lb. 1 ft.lb. 20-210 N.m. 1.4 N.m. 1.750 3.125 0.766 1.438 20.500 2.45 64-092 64-297
64-086 64-986 25-250 ft.lb. 1 ft.lb. 43-348 N.m. 1.4 N.m. 1.750 3.125 0.766 1.438 24.000 2.45 64-092 64-298
64-089 64-989 40-340 N.m. 2 N.m. — — 1.750 3.125 0.766 1.438 24.000 2.45 64-092 64-298
ASME B107.14M ISO 6789

3/8" Drive Micrometer Adjustable Torque Wrench, Flex Head Ratcheting

Product Certified PRIMARY SCALE ALTERNATE SCALE Head Head Head Thickness (in.) Length, Weight Ratchet Blow Mold
Number Model No. Range Incr. Range Incr. Width (in.) Length (in.) less tang with tang Inches lbs. Rep. Kit Case
64-146 64-954 5-75 ft.lb 0.5 ft.lb. 10.1-105.1 0.7 N.m. 1.500 2.750 0.563 1.063 19.000 2.95 64-078 64-295

1/2" Drive Micrometer Adjustable Torque Wrench, Flex Head Ratcheting

Product Certified PRIMARY SCALE ALTERNATE SCALE Head Head Head Thickness (in.) Length, Weight Ratchet Blow Mold
Number Model No. Range Incr. Range Incr. Width (in.) Length (in.) less tang with tang Inches lbs. Rep. Kit Case
64-186 64-958 25-250 ft.lb 1 ft.lb 43-348 N.m. 1.4 N.m. 1.750 3.500 0.766 1.438 27.000 4.65 64-092 64-298

7-4
 7
Micrometer Torque Wrenches

3/4" Drive Micrometer Adjustable Torque Wrenches, Ratchet Head

Product Certified PRIMARY SCALE ALTERNATE SCALE Head Head Head Thickness Length, Weight
Number Model No. Range Incr. Range Incr. Width (in.) Length (in.) less tang with tang Inches lbs.
64-094 64-994 50-400 ft.lb. 2.5 ft.lb. 85-559 N.m. 3.4 N.m. 2.450 3.063 1.700 2.620 33.000 9.62
64-095 64-995 100-600 ft.lb. 2.5 ft.lb. 153-830 N.m. 3.4 N.m. 2.450 3.063 1.700 2.620 40.500 10.72
64-099 64-999 150-800 N.m. 2.5 N.m. — — 2.450 3.063 1.700 2.620 40.500 10.72
ASME B107.14M ISO 6789

Pre-Set Torque Wrenches, Ratchet Head

Torque settings must be pre-set by making a simple internal adjustment, using a torque tester to verify the value. Designed for repetitive use in
production applications where inadvertent changes to the wrench setting are to be avoided. Rubber grip provides added comfort in repetitive situations.
Torque Tools

Product Drive Torque Torque Head Head Head Thickness (in.) Length, Weight Ratchet Blow Mold
Number Size Range Range Width (in.) Length (in.) less tang with tang Inches lbs. Rep. Kit Case
64-212 1/4" 30-200 in.lb. 4-25 N.m. 1.063 1.672 0.469 0.813 9.500 0.76 64-036 64-293
64-221 3/8" 50-250 in.lb. 6-29 N.m. 1.063 1.672 0.469 0.969 9.500 0.76 64-077 64-293
64-226 3/8" 10-100 ft.lb. 17-139 N.m. 1.500 2.125 0.563 1.063 17.100 2.05 64-078 64-295
64-236 1/2" 25-250 ft.lb. 43-348 N.m. 1.750 3.125 0.766 1.438 22.500 2.45 64-092 64-298
64-238 3/4" 100-650 ft.lb. 150-880 N.m. 2.450 3.063 1.700 2.620 41.800 11.00 — —
ASME B107.14M Certificate available upon request

1/4" Torque Screwdrivers

Accuracy of +/-6% clockwise (20-100% of full range). Provides precise torque
application. Clutch type release mechanism prevents over-torquing.
Product Certified PRIMARY SCALE Length, Weight
Number Model No. Range Incr. Inches lbs.
64-002 64-902 20-100 in./oz. 2 in./oz. 6.800 0.79
64-005 64-905 6-36 in.lb. 0.5 in.lb. 6.800 0.79
Includes 1/4" Drive female hex adapter. Comes in blow molded case.
ASME B107.14M

Micrometer Adjustable Torque Wrench Tubes – Interchangeable Head

Product Drive PRIMARY SCALE ALTERNATE SCALE Insert Length, Weight Blow Mold
Number Size Range Incr. Range Incr. Size Inches lbs. Case
64-152 3/8" 150-750 in.lb. 5 in.lb. - - 9 x 12mm 10.500 1.85 64-295
64-154 3/8" 5-75 ft.lb. 0.5 ft.lb. 10.1-105.1 N.m. 0.7 N.m. 9 x 12mm 10.500 1.85 64-295
64-156 1/2" 300-3000 in.lb. 12 in.lb. 43-348 N.m. 1.4 N.m. 14 x 18mm 22.500 2.15 64-297
64-158 1/2" 25-250 ft.lb. 1 ft.lb. 43-348 N.m. 1.4 N.m. 14 x 18mm 22.500 2.15 64-297
Replacement heads on Page 7-9

7-5 Always wear eye protection when near tools in use.

 7
Dial Torque Wrenches

Armstrong Torque Wrenches offer precise torque application in an easy-to-use durable design
Armstrong’s newly designed dial torque wrenches provide precise, accurate torque measurement in a
durable, easy to handle, comfortable wrench.

Memory Pointer

Cover Screws
Indicating Pointer

Reset Knob

Square Drive

Torque Tools
Cover

Moveable Bezel

• Accuracy of +/- 4% in either direction

• Strong, corrosion resistant housing offers
long-term performance
• Slim drive end allows easy access to tight spaces
Comfort Handle
• Large, dual-faced dials are color coded - silver for English,
blue for metric - quick readings from any angle
• Rubber handle for comfortable grip (1/4”, 3/8”, 1/2” models)
• Memory indicator pointer remains at maximum torque for
positive verification – valuable to determine breakaway torque
• Extension handle for extra leverage included on
600, 1000, and 2000 ft.lb. models
• Electric light signal and buzzer included on 600, 1000 and
2000 ft.lb. models for distinct audible and visual notification
• Sturdy, blow-mold case provides long-term protection

Comes in blow molded case

7-6
 7
Dial Torque Wrenches

All dial torque wrenches include a blow molded case. (64-407 is packaged in a card board box)

1/4" Drive Dial Torque Wrenches

Product PRIMARY SCALE SECONDARY SCALE Length, Weight
Number Range Incr. Range Incr. Inches lbs.
64-302 0-75 in.lb. 1 in.lb. 0-8 N.m. 0.2 N.m. 10.250 1.20
ASME B107.14M ISO 6789

3/8" Drive Dial Torque Wrenches

Product PRIMARY SCALE SECONDARY SCALE Length, Weight
Number Range Incr. Range Incr. Inches lbs.
64-352 0-250 in.lb. 5 in.lb. 0-27 N.m. 0.5 N.m. 10.250 1.30
64-355 0-600 in.lb. 20 in.lb. 0-66 N.m. 2 N.m. 12.500 1.30
64-358 0-50 ft.lb. 1 ft.lb. 0-66 N.m. 2 N.m. 12.500 1.30
ASME B107.14M ISO 6789

1/2" Drive Dial Torque Wrenches

Product PRIMARY SCALE SECONDARY SCALE Length, Weight
Torque Tools

Number Range Incr. Range Incr. Inches lbs.

64-402 0-175 ft.lb. 5 ft.lb. 0-225 N.m. 5 N.m. 21.000 2.90
64-405 0-250 ft.lb. 5 ft.lb. 0-330 N.m. 10 N.m. 21.000 2.90
ASME B107.14M ISO 6789

1/2" Drive Dial Torque Wrenches, Ratchet Head

Product PRIMARY SCALE SECONDARY SCALE Length, Weight
Number Range Incr. Range Incr. Inches lbs.
64-407 0-250 ft.lb. 5 ft.lb. 0-330 N.m. 10 N.m. 23.300 3.50
ASME B107.14M ISO 6789

3/4" Drive Dial Torque Wrenches with Wire Dial Guard

Product PRIMARY SCALE ALTERNATE SCALE Length, Weight
Number Range Incr. Range Incr. Inches lbs.
64-452 0-350 ft.lb. 10 ft.lb. 0-450 N.m. 10 N.m. 47.000 8.30
ASME B107.14M ISO 6789

3/4" Drive Dial Torque Wrenches

Equipped with an extension.
Product PRIMARY SCALE SECONDARY SCALE Length, Weight
Number Range Incr. Range Incr. Inches lbs.
64-455 0-600 ft.lb. 10 ft.lb. 0-800 N.m. 20 N.m. 47.000 8.30
64-458* 0-600 ft.lb. 10 ft.lb. 0-800 N.m. 20 N.m. 47.000 8.30
*Features electric light signal ASME B107.14M ISO 6789

1" Drive Dial Torque Wrench, with Electric Light Signal Dial
Equipped with an extension.
Product PRIMARY SCALE SECONDARY SCALE Length, Weight
Number Range Incr. Range Incr. Inches lbs.
64-502 0-1000 ft.lb. 20 ft.lb. 0-1325 N.m. 25 N.m. 72.000 12.80
ASME B107.14M ISO 6789

7-7 Always wear eye protection when near tools in use.

 7
Dial, Beam Torque Wrenches

1" Drive Dial Torque Wrench, with Electric Light Signal Dial
Equipped with topside 1" square female drive for use with torque multiplier. Also equipped with 4 extensions.
Product PRIMARY SCALE SECONDARY SCALE Length, Weight
Number Range Incr. Range Incr. Inches lbs.
64-505 0-2000 ft.lb. 50 ft.lb. 0-2650 N.m. 50 N.m. 11.000 42.00
ASME B107.14M ISO 6789

Torque Tools
• Measures torque in both right and left hand directions
• Accuracy +/- 7% of indicated reading

Deflecting Beam Torque Wrenches

Product Drive PRIMARY SCALE SECONDARY SCALE Length, Weight
Number Size Range Incr. Range Incr. Inches lbs.
64-720* 1/4" 0-60 in/Ib 2.5 in/Ib 0-70 cm/kg 0.25 cm/kg 11.000 0.50
64-730 3/8" 0-600 in/Ib 25.0 in/Ib 0-70 N.m. 5 N.m. 15.000 0.80
64-740 1/2" 0-150 ft.lb. 5 ft.lb. 0-200 N.m. 10 N.m. 18.300 1.50
*Ball ended handle

7-8
 7
Replacement Heads

Torque Wrench Replacement Heads

Product Drive Size, Insert Size,
Number Inches Description mm
64-303 1/4, 3/8 TW Head Open End 1/4" 9 x 12
64-304 1/4, 3/8 TW Head Open End 5/16" 9 x 12
64-305 1/4, 3/8 TW Head Open End 3/8" 9 x 12
64-306 1/4, 3/8" TW Head Open End 7/16" 9 x 12
64-307 1/4, 3/8 TW Head Open End 1/2" 9 x 12
64-308 1/4, 3/8 TW Head Open End 9/16" 9 x 12
64-309 1/4, 3/8 TW Head Open End 5/8" 9 x 12
64-310 1/4, 3/8 TW Head Open End 11/16" 9 x 12
64-311 1/4, 3/8 TW Head Open End 3/4" 9 x 12
Torque Tools

64-312 1/2 TW Head Open End 7/16" 14 x 18

64-313 1/2 TW Head Open End 1/2" 14 x 18
64-314 1/2 TW Head Open End 9/16" 14 x 18
64-315 1/2 TW Head Open End 5/8" 14 x 18
64-316 1/2 TW Head Open End 11/16" 14 x 18
64-317 1/2 TW Head Open End 3/4" 14 x 18
64-318 1/2 TW Head Open End 13/16" 14 x 18
64-319 1/2 TW Head Open End 7/8" 14 x 18
64-320 1/2 TW Head Open End 15/16" 14 x 18
64-321 1/2 TW Head Open End 1" 14 x 18
64-322 1/2 TW Head Open End 1-1/8" 14 x 18
64-323 1/4, 3/8 TW Head Box End 1/4" 9 x 12
64-324 1/4, 3/8 TW Head Box End 5/16" 9 x 12
64-325 1/4, 3/8 TW Head Box End 3/8" 9 x 12
64-326 1/4, 3/8 TW Head Box End 7/16" 9 x 12
64-327 1/4, 3/8 TW Head Box End 1/2" 9 x 12
64-328 1/4, 3/8 TW Head Box End 9/16" 9 x 12
64-329 1/4, 3/8 TW Head Box End 5/8" 9 x 12
64-330 1/4, 3/8 TW Head Box End 11/16" 9 x 12
64-331 1/4, 3/8 TW Head Box End 3/4" 9 x 12
64-332 1/4, 3/8 TW Head Box End 13/16" 9 x 12
64-333 1/4, 3/8 TW Head Box End 7/8" 9 x 12
64-334 1/2 TW Head Box End 1/2" 14 x 18
64-335 1/2 TW Head Box End 9/16" 14 x 18
64-336 1/2 TW Head Box End 5/8" 14 x 18
64-337 1/2 TW Head Box End 11/16" 14 x 18
64-338 1/2 TW Head Box End 3/4" 14 x 18
64-339 1/2 TW Head Box End 13/16" 14 x 18
64-340 1/2 TW Head Box End 7/8" 14 x 18
64-341 1/2 TW Head Box End 15/16" 14 x 18
64-342 1/2 TW Head Box End 1" 14 x 18
Tubes on Page 7-5
Made in USA with domestic and foreign components

7-9 Always wear eye protection when near tools in use.

 7
Torque Adapters

64-750
7 Pc. 3/8” Drive 12 Point Torque Wrench Adapter Set
Approximate Weight, 0.90 lbs.
Product Opening, Product Opening,
Number Inches Number Inches
64-752 3/8 64-756 5/8
64-753 7/16 64-757 11/16
64-754 1/2 64-758 3/4
64-755 9/16

64-700 METRIC
4 Pc. 3/8” Drive 12 Point Torque Wrench Adapter Set
Approximate Weight, 0.70 lbs.
Product Opening, Product Opening,
Number mm Number mm
64-710 10 64-715 15
64-713 13 64-718 18

3/8” Drive 12 Point Torque Wrench Adapter

Product Opening, Length, Weight,

Torque Tools
Number Inches Inches lbs.
64-752 3/8 0.500 0.01
64-753 7/16 0.500 0.11
64-754 1/2 0.500 0.11
64-755 9/16 0.500 0.12
64-756 5/8 0.500 0.13
64-757 11/16 0.500 0.14
64-758 3/4 0.500 0.15

3/8” Drive 12 Point Torque Wrench Adapter METRIC

Product Opening, Length, Weight,
Number mm Inches lbs.
64-710 10 0.500 0.09
64-713 13 0.500 0.11
64-715 15 0.500 0.12
64-718 18 0.500 0.14

3/8” Drive 12 Point Spline Torque Wrench Adapter

Product Opening, Length, Weight,
Number # Inches lbs.
64-770 7 0.500 0.07
64-771 8 0.500 0.07
64-772 9 0.500 0.08
64-773 10 0.500 0.09
64-774 12 0.500 0.09
64-775 14 0.500 0.11
64-776 16 0.500 0.11
64-777 18 0.500 0.12
64-778 20 0.500 0.13
64-779 22 0.500 0.14
64-780 24 0.500 0.15

7-10
 7
Torque Multipliers

Reaction Bar Torque Multipliers

LOW INPUT TORQUE (160-225 IN.LB.) BUILT IN ANTI-BACKLASH DEVICE / TORQUE HOLDING RATCHET
• Can easily be applied by one person using standard (2,200 TO 3,200 IN.LB. MODELS)
1/2" drive tools • Maintains the multiplier’s input torque allowing the use of ratcheting drive
PLANETARY GEAR SYSTEM tools
• Provides output torque accuracy of +/-5% BUILT IN ANGLE OF TURN PROTRACTOR
STURDY CARRYING CASE (1,200 TO 3,200 IN.LB. MODELS)
• Allows for convenient storage, easy transportation • Displays multiplier’s output angle for use on fasteners requiring a specific
angle rotation after applied torque
SHEARABLE OUTPUT DRIVE SQUARE IS REPLACEABLE
(1,200 TO 3,200 IN.LB. MODELS)
• Square drive shears at 3-10% overload torque to protect against
expensive internal damage

750 Foot Pound Reaction Bar Torque Multiplier

Product Input Output Max Input Max Output Gear Torque Head Head Length, Weight
Number Drive Drive ft.lb. ft.lb. Ratio Ratio Diameter (in.) Thickness (in.) Inches lbs.
64-830 1/2 Sq. Female 3/4 Sq. Male 227 750 4.0:1 3.3:1 2.812 2.812 8.531 4.60q
Torque Tools

1,200 Foot Pound Reaction Bar Torque Multiplier

Product Input Output Max Input Max Output Gear Torque Head Head Length, Weight Repl.
Number Drive Drive ft.lb. ft.lb. Ratio Ratio Diameter (in.) Thickness (in.) Inches lbs. Sq. Dr.
64-832 1/2 Sq. Female 3/4 Sq. Male 200 1,200 6.3:1 6.0:1 3.937 4.062 14.125 13.00 64-850

2,200 Foot Pound Reaction Bar Torque Multiplier

Product Input Output Max Input Max Output Gear Torque Head Head Length, Weight Repl.
Number Drive Drive ft.lb. ft.lb. Ratio Ratio Diameter (in.) Thickness (in.) Inches lbs. Sq. Dr.
64-834 1/2 Sq. Female 1 Sq. Male 162 2,200 15.0:1 13.6:1 4.031 5.812 20.000 20.60 64-851

3,200 Foot Pound Reaction Bar Torque Multiplier

Product Input Output Max Input Max Output Gear Torque Head Head Length, Weight Repl.
Number Drive Drive ft.lb. ft.lb. Ratio Ratio Diameter (in.) Thickness (in.) Inches lbs. Sq. Dr.
64-836 1/2 Sq. Female 1 Sq. Male 173 3,200 20.2:1 18.5:1 4.031 6.375 20.000 22.10 64-852

2,000 Foot Pound Reaction Bar Torque Multiplier

Product Input Output Max Input Max Output Gear Torque Head Head Length, Weight
Number Drive Drive ft.lb. ft.lb. Ratio Ratio Diameter (in.) Thickness (in.) Inches lbs.
64-833 3/4 Sq. Female 1 Sq. Male 500 2,000 4.27:1 3.5:1 3.800 4.500 19.50 12.00

7-11 Always wear eye protection when near tools in use.

 7
Torque Multipliers

Plate Reaction Torque Multipliers

LOW INPUT TORQUE (160-190 IN.LB.) BUILT IN ANTI-BACKLASH DEVICE / TORQUE HOLDING RATCHET
• Can easily be applied by one person using standard 1/2" drive tools • Maintains the multiplier’s input torque allowing the use of
ratcheting drive tools
SHEARABLE OUTPUT DRIVE SQUARE IS REPLACEABLE
• Square drive shears at 3-10% overload torque to protect against PLANETARY GEAR SYSTEM
expensive internal damage • Provides torque accuracy of +/-5%

2,200 Foot Pound Plate Reaction Torque Multiplier

Product Input Output Max Input Max Output Gear Torque Head Head Length, Weight Repl.
Number Drive Drive ft.lb. ft.lb. Ratio Ratio Diameter (in.) Thickness (in.) Inches lbs. Sq. Dr.
64-840 1/2 Sq. Female 1 Sq. Male 162 2,200 15.0:1 13.6:1 4.875 5.500 14.062 17.20 64-851

Torque Tools
5,000 Foot Pound Plate Reaction Torque Multiplier
Product Input Output Max Input Max Output Gear Torque Head Head Length, Weight Repl.
Number Drive Drive ft.lb. ft.lb. Ratio Ratio Diameter (in.) Thickness (in.) Inches lbs. Sq. Dr.
64-842 1/2 Sq. Female 1-1/2 Sq. Male 189 5,000 29.25:1 26.5:1 5.625 8.750 14.906 34.00 64-853

8,000 Foot Pound Plate Reaction Torque Multiplier

Product Input Output Max Input Max Output Gear Torque Head Head Length, Weight Repl.
Number Drive Drive ft.lb. ft.lb. Ratio Ratio Diameter (in.) Thickness (in.) Inches lbs. Sq. Dr.
64-844 1/2 Sq. Female 1-1/2 Sq. Male 154 8,000 60.0:1 52.0:1 5.812 10.750 15.187 50.30 64-854

SAFETY NOTICE
ALWAYS POSITION REACTION BAR SOLIDLY AGAINST AN OBJECT ALWAYS USE HEAVY DUTY POWER/IMPACT SOCKETS.
WITH SUFFICIENT BULK TO WITHSTAND THE GENERATED FORCE. DO NOT USE WITH POWER DRIVE TOOLS.
BE SURE TO HAVE A CLEAN, SECURE GRIP ON THE INPUT WRENCH COVER APPLICATIONS WITH APPROPRIATE SHIELD.
TO AVOID KICK-BACK. DO NOT EXCEED INPUT CAPACITY.

7-12
 7
Torque Testers

Electronic Torque Testers

DESIGNED TO BE A STURDY, COMPACT, COST EFFICIENT TESTER
• Can be mounted on a wall or workbench allowing operators to test
torque wrenches at their work stations
ALL STEEL CONSTRUCTION WITH DURABLE NO-BREAK ROTARY NECK
ACCURACY OF +/-1% OF INDICATED VALUE (10% TO 100% OF RANGE)
• Includes accuracy certification
MULTIFUNCTION UNIT OFFERS VERSATILITY
• First Peak Mode
• Peak Mode
• Track Mode
• Quick set target torque for Go/No Go prompting
• Software on/auto off
• Three units of measure (ft-lb, in-lb, N.m.)
• Three way LED prompting wtih buzzer (under/within/over target)
• Adjustable display allows you to see the digits at any angle

Electronic Torque Testers

Product Drive Size, Primar y Scale Secondar y Scale Weight
Number Inches Range Range lbs.
Torque Tools

64-623 1/4 5-50 in.lb. 5.6-56 N.m. 6.00

64-633 3/8 25-250 in.lb. 28-280 N.m. 6.00
64-637 3/8 10-100 ft.lb. 13-136 N.m. 6.00
64-647 1/2 25-250 ft.lb. 34-340 N.m. 6.00
64-657 3/4 60-600 ft.lb. 81-813 N.m. 6.50

7-13 Always wear eye protection when near tools in use.

 SCREWDRIVERS AND NUTDRIVERS 8
Dual Material Screwdrivers
Round Shank Screwdrivers
SPEED (Standard and Phillips)
Handles are color coded for
easy identification Square Shank Screwdrivers (Standard)
Cabinet/Electrician’s
Style Screwdrivers
Torx® Screwdrivers
Bolster Screwdrivers
SPEED
Hollow Shaft Nut Drivers
Easy to read size molded
into handle Solid Shaft Nut Drivers
T-Handle Nut Drivers
Screw Starters

STRENGTH
T-handle provides
additional leverage for
greater torque strength STRENGTH
Specifically heat-treated for the
correct balance of strength and durability

ACCESS
Manufactured to industrial specifications
assuring a thin wall design with precise
nut end dimensions ACCESS
Cushion grip handle for
increased comfort and
reduced fatigue

STRENGTH
Full shaft heat treat provides
superior strength that resists tip
wear, as well as shank twisting
and breakage

SPEED
Widened design in center, plus
STRENGTH broad, shallow flutes at base
Nut bolsters for of handle aid in spinning
SAFETY additional turning power and finger tip control
Blasted tips eliminate chrome peel and provide
superior fit between tip and fastener, reducing
slippage and possible injury
 8
Screwdriver Sets

Set 66-621
6 Pc. (Standard, Phillips) Dual Material
Screwdriver Set
Product Tip Size, Tip Width, Blade Length,
Number Inches Inches Inches
Phillips
66-400 #1 0.188 3.000
66-402 #2 0.250 4.000
66-404 #3 0.313 6.000
Standard (Square)
66-441 0.040 0.250 4.000
66-443 0.050 0.313 6.000
66-445 0.066 0.375 8.000

Storage Tray
Screwdrivers and Nut Drivers

8-1 Always wear eye protection when near tools in use.

 8
Screwdriver Sets

Set 66-611
19 Pc. (Standard, Phillips, Cabinet) Screwdriver Set
Product Tip Size, Tip Width, Blade Length,
Number Inches Inches Inches
Phillips
66-150 #2 0.250 1.500
66-152 #0 0.125 2.500
66-153 #1 0.188 3.000
66-155 #1 0.188 6.000
66-156 #2 0.250 4.000
66-158 #2 0.250 8.000
66-161 #3 0.313 6.000
66-164 #4 0.375 8.000
Standard (Square)
66-203 0.030 0.188 4.000
66-208 0.037 0.250 4.000

Screwdrivers and Nut Drivers

66-217 0.042 0.313 6.000
66-220 0.050 0.375 8.000
66-226 0.070 0.438 12.000
66-232 0.037 0.250 1.500
Cabinet
66-253 0.020 0.125 3.000
66-255 0.020 0.125 4.000
66-259 0.020 0.125 8.000
66-262 0.037 0.188 4.000
66-268 0.037 0.188 8.000

Vinyl Rolls
29-415, 29-412, 29-411

Set 66-620
8 Pc. (Standard, Phillips, Cabinet) Screwdriver Set
Product Tip Size, Tip Width, Blade Length,
Number Inches Inches Inches
Standard (Round)
66-102 0.037 0.250 4.000
66-103 0.040 0.313 6.000
Phillips
66-153 #1 0.188 3.000
66-156 #2 0.250 4.000
66-161 #3 0.313 6.000
Cabinet
66-261 0.037 0.188 3.000
66-262 0.037 0.188 4.000
66-265 0.037 0.188 5.000

Vinyl Roll
29-415

8-2
 8
Screwdriver Sets

Set 66-626
7 Pc. Standard (Square) Screwdriver Set
Product Tip Size, Tip Width, Blade Length,
Number Inches Inches Inches
66-203 0.030 0.188 4.000
66-211 0.037 0.250 6.000
66-214 0.042 0.313 8.000
66-217 0.042 0.313 6.000
66-221 0.050 0.375 10.000
66-223 0.050 0.375 12.000
66-232 0.037 0.250 1.500

Vinyl Roll
29-414
Screwdrivers and Nut Drivers

Set 66-606
6 Pc. Standard (Square) Screwdriver Set
Product Tip Size, Tip Width, Blade Length,
Number Inches Inches Inches
66-203 0.030 0.188 4.000
66-208 0.037 0.250 4.000
66-217 0.042 0.313 6.000
66-220 0.050 0.375 8.000
66-226 0.070 0.438 12.000
66-232 0.037 0.250 1.500

Vinyl Roll
29-412

Set 66-610
4 Pc. Standard (Square) Screwdriver Set
Product Tip Size, Tip Width, Blade Length,
Number Inches Inches Inches
66-202 0.020 0.125 3.000
66-203 0.030 0.188 4.000
66-217 0.042 0.313 6.000
66-220 0.050 0.375 8.000

Vinyl Roll
29-410

8-3 Always wear eye protection when near tools in use.

 8
Screwdriver Sets

Set 66-608
6 Pc. Standard (Round) Screwdriver Set
Product Tip Size, Tip Width, Blade Length,
Number Inches Inches Inches
66-102 0.037 0.250 4.000
66-103 0.040 0.313 6.000
66-105 0.040 0.313 10.000
66-106 0.050 0.375 8.000
66-232 0.037 0.250 1.500
66-262 0.037 0.188 4.000

Vinyl Roll
29-412

Screwdrivers and Nut Drivers

Set 66-618
4 Pc. Cabinet Screwdriver Set
Product Tip Size, Tip Width, Blade Length,
Number Inches Inches Inches
66-261 0.037 0.188 3.000
66-262 0.037 0.188 4.000
66-267 0.037 0.188 6.000
66-268 0.037 0.188 8.000

Vinyl Roll
29-410

Set 66-604
8 Pc. Torx® Screwdriver Set
Product Tip Tip Width, Blade Length,
Number Size Inches Inches
66-321 T10 0.188 3.000
66-323 T15 0.188 3.000
66-324 T15 0.188 1.250
66-326 T20 0.188 3.000
66-327 T25 0.188 3.000
66-329 T27 0.250 4.000
66-330 T30 0.250 4.000
66-332 T40 0.313 6.000

Vinyl Roll
29-415
TORX® is the registered trademark of Acument Intellectual Properties, LLC.

8-4
 8
Screwdriver Sets

Set 66-619
6 Pc. Phillips Screwdriver Set
Product Tip Tip Width, Blade Length,
Number Size Inches Inches
66-150 #2 0.250 1.500
66-152 #0 0.125 2.500
66-153 #1 0.188 3.000
66-156 #2 0.250 4.000
66-161 #3 0.313 6.000
66-164 #4 0.375 8.000

Vinyl Roll
29-412
Screwdrivers and Nut Drivers

Set 66-639
4 Pc. Phillips Screwdriver Set
Product Tip Size, Tip Width, Blade Length,
Number Inches Inches Inches
66-152 #0 0.125 2.500
66-153 #1 0.188 3.000
66-156 #2 0.250 4.000
66-161 #3 0.313 6.000

Vinyl Roll
29-410

Set 66-620A
8 Pc. (Standard, Phillips, Cabinet) Screwdriver Set
Product Tip Size, Tip Width, Blade Length,
Number Inches Inches Inches8 Pc. (Standard,
Standard (Round)
66-232 0.037 0.250 1.500
66-102 0.037 0.250 4.000
66-103 0.040 0.313 6.000
Phillips
66-153 #2 0.188 1.500
66-153 #1 0.188 3.000
66-156 #2 0.250 4.000
66-161 #3 0.313 6.000
Cabinet
66-261 0.037 0.188 3.000

8-5 Always wear eye protection when near tools in use.

 8
Screwdriver Sets

Set 66-612
8 Pc. (Standard, Phillips) Screwdriver Set
Product Tip Size, Tip Width, Blade Length,
Number Inches Inches Inches
Standard (Round)
66-501 0.040 0.250 4.000
66-502 0.037 0.188 3.000
66-504 0.045 0.313 6.000
66-505 0.037 0.250 4.000
66-507 0.055 0.375 8.000
Phillips
66-524 #1 0.188 3.000
66-527 #2 0.250 4.000
66-530 #3 0.313 6.000

Vinyl Roll

Screwdrivers and Nut Drivers

29-415

Set 66-614
7 Pc. (Standard, Phillips, Cabinet) Screwdriver Set
Product Tip Size, Tip Width, Blade Length,
Number Inches Inches Inches
Standard (Round)
66-504 0.045 0.313 6.000
Phillips
66-524 #1 0.188 3.000
66-527 #2 0.250 4.000
Standard (Square)
66-544 0.040 0.250 4.000
Cabinet
66-561 0.035 0.188 3.000
66-563 0.035 0.188 4.000
66-564 0.035 0.188 6.000

Vinyl Roll
29-413

Set 66-615
5 Pc. (Standard, Phillips, Cabinet) Screwdriver Set
Product Tip Size, Tip Width, Blade Length,
Number Inches Inches Inches
Standard (Round)
66-504 0.045 0.313 6.000
Phillips
66-527 #2 0.250 4.000
Standard (Square)
66-544 0.040 0.250 4.000
Cabinet
66-564 0.035 0.188 6.000
66-567 0.035 0.188 8.000

Vinyl Roll
29-411

8-6
 8
Screwdrivers

Standard Tip, Round Shank, Dual Material

A1 A2 B C D
Tip Tip Blade Blade Overall E
Product Thickness, Width, Length, Dia., Length, Handle Size Screw
Number Inches Inches Inches Inches Inches Dia. x Length Size
66-440 0.040 0.250 2.250 0.250 6.095 1.250 x 3.860 #8, 9
66-441 0.040 0.250 4.000 0.250 8.340 1.400 x 4.350 #8, 9
66-443 0.050 0.313 6.000 0.313 10.700 1.500 x 4.700 #10
66-445 0.066 0.375 8.000 0.375 12.660 1.530 x 4.670 #12, 14-24, 0.250-0.375
Screwdrivers and Nut Drivers

Phillips Tip, Round Shank, Dual Material

A1 A2 B C D E
Product Tip Tip Width, Blade Length, Blade Dia., Overall Length, Handle Size Screw
Number Size Inches Inches Inches Inches Dia. x Length Size
66-400 #1 0.188 3.000 0.188 6.850 1.200 x 3.870 P1
66-402 #2 0.250 4.000 0.250 8.350 1.360 x 6.350 P2
66-404 #3 0.313 6.000 0.313 10.600 1.530 x 4.700 P3

8-7 Always wear eye protection when near tools in use.

 8
Screwdrivers

Standard Tip, Square Shank

A1 A2 B C D
Tip Tip Blade Blade Overall E
Product Thickness, Width, Length, Dia., Length, Handle Size Screw
Number Inches Inches Inches Inches Inches Dia. x Length Size
66-202*† 0.020 0.125 3.000 0.125 5.250 0.625 x 2.250 #2, 3
66-203† 0.030 0.188 4.000 0.188 7.750 1.063 x 3.750 #5, 6, 7
66-205† 0.030 0.188 6.000 0.188 9.750 1.063 x 3.750 #5, 6, 7
66-206 0.037 0.188 1.500 0.188 5.250 1.063 x 3.750 #5, 6, 7
66-208† 0.037 0.250 4.000 0.250 8.250 1.188 x 4.250 #8, 9
66-209† 0.037 0.250 8.000 0.250 12.250 1.188 x 4.250 #8, 9
66-211† 0.037 0.250 6.000 0.250 10.250 1.188 x 4.250 #8, 9
66-212† 0.037 0.250 3.000 0.250 7.250 1.188 x 4.250 #8, 9
66-214† 0.042 0.313 8.000 0.313 13.000 1.250 x 5.000 #10
66-215† 0.042 0.313 10.000 0.313 15.000 1.250 x 5.000 #10
66-217† 0.042 0.313 6.000 0.313 11.000 1.250 x 5.000 #10
66-218† 0.042 0.313 5.000 0.313 10.000 1.250 x 5.000 #10

Screwdrivers and Nut Drivers

66-220† 0.050 0.375 8.000 0.375 13.500 1.250 x 5.500 #12, 14-24, 0.250-0.375
66-221† 0.050 0.375 10.000 0.375 15.500 1.250 x 5.500 #12, 14-24, 0.250-0.375
66-223† 0.050 0.375 12.000 0.375 17.500 1.250 x 5.500 #12, 14-24, 0.250-0.375
66-224† 0.050 0.375 6.000 0.375 11.500 1.250 x 5.500 #12, 14-24, 0.250-0.375
66-226† 0.070 0.438 12.000 0.438 18.000 1.500 x 6.000
66-227† 0.070 0.438 10.000 0.438 15.000 1.500 x 6.000
†
ASME B107-15 Fed’l Spec. GGG-S-121e
* Includes Pocket Clip

Standard Tip, Round Shank

A1 A2 B C D
Tip Tip Blade Blade Overall E
Product Thickness, Width, Length, Dia., Length, Handle Size Screw
Number Inches Inches Inches Inches Inches Dia. x Length Size
66-102† 0.037 0.250 4.000 0.250 8.250 1.188 x 4.250 #8, 9
66-103 0.040 0.313 6.000 0.313 11.000 1.250 x 5.000 #10
66-105 0.040 0.313 10.000 0.313 15.000 1.250 x 5.000 #10
66-106† 0.050 0.375 8.000 0.375 13.500 1.250 x 5.500 #12, 14-24, 0.250-0.375
66-108† 0.050 0.375 10.000 0.375 15.500 1.250 x 5.500 #12, 14-24, 0.250-0.375
66-109† 0.050 0.375 12.000 0.375 170.500 1.250 x 5.500 #12, 14-24, 0.250-0.375
†
ASME B107-15 Fed’l Spec. GGG-S-121e

8-8
 8
Screwdrivers

Cabinet Tip, Round Shank

A1 A2 B C D
Tip Tip Blade Blade Overall E
Product Thickness, Width, Length, Dia., Length, Handle Size Screw
Number Inches Inches Inches Inches Inches Dia. x Length Size
66-253 0.020 0.125 3.000 0.125 5.250 0.625 x 2.250 #2, 3
66-255 0.020 0.125 4.000 0.125 6.250 0.875 x 3.000 #2, 3
66-256 0.020 0.125 5.000 0.125 7.250 0.875 x 3.000 #2, 3
66-258 0.020 0.125 6.000 0.125 8.250 0.875 x 3.000 #2, 3
66-259 0.020 0.125 8.000 0.125 10.250 0.875 x 3.000 #2, 3
66-261 0.037 0.188 3.000 0.188 6.750 1.063 x 3.750 #5, 6, 7
66-262 0.037 0.188 4.000 0.188 7.750 1.063 x 3.750 #5, 6, 7
66-265 0.037 0.188 5.000 0.188 8.750 1.063 x 3.750 #5, 6, 7
66-267 0.037 0.188 6.000 0.188 9.750 1.063 x 3.750 #5, 6, 7
66-268 0.037 0.188 8.000 0.188 11.750 1.063 x 3.750 #5, 6, 7
66-270 0.037 0.188 10.000 0.188 13.750 1.063 x 3.750 #5, 6, 7
66-271 0.040 0.250 10.000 0.250 14.250 1.188 x 4.250 #8, 9
Screwdrivers and Nut Drivers

Phillips Tip, Round Shank

A1 A2 B C D E
Product Tip Tip Width, Blade Length, Blade Dia., Overall Length, Handle Size Screw
Number Size Inches Inches Inches Inches Dia. x Length Size
66-152* #0 0.125 2.500 0.125 4.750 0.625 x 2.250 P0
66-153 #1 0.188 3.000 0.188 6.750 1.063 x 3.750 P1
66-155 #1 0.188 6.000 0.188 9.750 1.063 x 3.750 P1
66-156 #2 0.250 4.000 0.250 8.250 1.188 x 4.250 P2
66-158 #2 0.250 8.000 0.250 12.250 1.188 x 4.250 P2
66-161 #3 0.313 6.000 0.313 11.000 1.250 x 5.000 P3
66-164 #4 0.375 8.000 0.375 13.500 1.250 x 5.500 P4
ASME B107-15 Fed’l Spec. GGG-S-121e
* Includes Pocket Clip

8-9 Always wear eye protection when near tools in use.

 8
Screwdrivers

Standard Tip, Stubby

A1 A2 B C D
Tip Tip Blade Blade Overall E
Product Thickness, Width, Length, Dia., Length, Handle Size Screw
Number Inches Inches Inches Inches Inches Dia. x Length Size
66-230 0.030 0.188 1.000 0.188 3.000 1.188 x 2.000 #5, 6, 7
66-232 0.037 0.250 1.500 0.250 3.500 1.188 x 2.000 #8, 9

Phillips Tip, Stubby

A1 A2 B C D E
Product Tip Tip Width, Blade Length, Blade Dia., Overall Length, Handle Size Screw

Screwdrivers and Nut Drivers

Number Size Inches Inches Inches Inches Dia. x Length Size
66-150 #2 0.250 1.500 0.250 3.500 1.188 x 2 P2

Standard Tip, with Pocket Clip

A1 A2 B C D
Tip Tip Blade Blade Overall E
Product Thickness, Width, Length, Dia., Length, Handle Size Screw
Number Inches Inches Inches Inches Inches Dia. x Length Size Shank
66-253 0.020 0.125 3.000 0.125 5.250 0.625 x 2.250 #2, 3 Round
66-202 0.020 0.125 3.000 0.125 5.250 0.625 x 2.250 #2, 3 Square

Phillips Tip, with Pocket Clip

A1 A2 B C D E
Product Tip Tip Width, Blade Length, Blade Dia., Overall Length, Handle Size Screw
Number Size Inches Inches Inches Inches Dia. x Length Size
66-152 #0 0.125 2.500 0.125 4.750 0.625 x 2.250 P0
ASME B107-15 Fed’l Spec. GGG-S-121e

8-10
 8
Screwdrivers

Torx®, Round Shank

A1 A2 B C D E
Product Tip Tip Width, Blade Length, Blade Dia., Overall Length, Handle Size Screw
Number Size Inches Inches Inches Inches Dia. x Length Size
66-321 T10 0.188 3.000 0.188 6.750 1.063 x 3.750 T-10
66-323 T15 0.188 3.000 0.188 6.750 1.063 x 3.750 T-15
66-324 T15 0.188 1.250 0.188 5.000 1.063 x 3.750 T-15
66-326 T20 0.188 3.000 0.188 6.750 1.063 x 3.750 T-20
66-327 T25 0.188 3.000 0.188 6.750 1.063 x 3.750 T-25
66-329 T27 0.250 4.000 0.250 4.250 1.188 x 4.250 T-27
66-330 T30 0.250 4.000 0.250 4.250 1.188 x 4.250 T-30
66-332 T40 0.313 6.000 0.313 11.000 1.250 x 5.000 T-40
TORX® is the registered trademark of Acument Intellectual Properties, LLC.
Screwdrivers and Nut Drivers

Square Tip, Round Shank

A1 A2 B C D E
Product Tip Tip Width, Blade Length, Blade Dia., Overall Length, Handle Size Screw
Number Size Inches Inches Inches Inches Dia. x Length Size
66-304 #1 0.188 3.000 0.188 6.750 1.063 x 3.750 R1
66-305 #2 0.250 4.000 0.250 8.250 1.188 x 4.250 R2
66-306 #3 0.250 4.000 0.250 8.250 1.188 x 4.250 R3

8-11 Always wear eye protection when near tools in use.

 8
Screwdrivers

Cabinet Tip, Slotted

A1 A2 B C D
Tip Tip Blade Blade Overall E
Product Thickness, Width, Length, Dia., Length, Handle Size Screw
Number Inches Inches Inches Inches Inches Dia. x Length Size
66-261A 0.033 0.220 3.000 0.187 5.750 1.190 x 3.600 #5, 6, 7

Screwdrivers and Nut Drivers

Phillips Tip, Round Shank
A1 A2 B C D E
Product Tip Tip Width, Blade Length, Blade Dia., Overall Length, Handle Size Screw
Number Size Inches Inches Inches Inches Dia. x Length Size
66-153A #1 0.188 3.000 0.188 6.500 1.188 x 3.600 P1
66-156A #2 0.250 6.000 0.250 8.250 1.250 x 4.250 P2
66-161A #3 0.313 6.000 0.313 10.500 1.375 x 4.600 P3

8-12
 8
Screwdrivers

Standard Tip, Round Shank

A1 A2 B C D
Tip Tip Blade Blade Overall E
Product Thickness, Width, Length, Dia., Length, Handle Size Screw
Number Inches Inches Inches Inches Inches Dia. x Length Size
66-102A 0.037 0.250 4.000 0.250 8.250 1.250 x 4.250 #8, 9
66-103A 0.040 0.313 6.000 0.313 10.500 1.375 x 4.600 #10
ASME B107-15 Fed’l Spec. GGG-S-121e
Screwdrivers and Nut Drivers

Standard Tip, Stubby

A1 A2 B C D
Tip Tip Blade Blade Overall E
Product Thickness, Width, Length, Dia., Length, Handle Size Screw
Number Inches Inches Inches Inches Inches Dia. x Length Size
66-232A 0.037 0.250 1.500 0.250 3.500 1.188 x 2.000 #8, 9
ASME B107-15 Fed’l Spec. GGG-S-121e

Phillips Tip, Stubby

A1 A2 B C D E
Product Tip Tip Width, Blade Length, Blade Dia., Overall Length, Handle Size Screw
Number Size Inches Inches Inches Inches Dia. x Length Size
66-150A #2 0.250 1.500 0.250 3.500 1.188 x 2.000 P2
ASME B107-15 Fed’l Spec. GGG-S-121e

8-13 Always wear eye protection when near tools in use.

 8
Electricians Screwdrivers

Standard Tip, Square Shank

A1 A2 B C D
Tip Tip Blade Blade Overall E
Product Thickness, Width, Length, Dia., Length, Handle Size Screw
Number Inches Inches Inches Inches Inches Dia. x Length Size
66-541 0.040 0.250 1.313 0.250 3.063 1.250 x 1.750 #8, 9
66-544 0.040 0.250 4.000 0.250 8.250 1.250 x 4.250 #8, 9
66-546 0.050 0.375 12.000 0.375 17.438 1.375 x 5.438 #12, 14-24, 0.250-0.375
66-547 0.050 0.313 6.000 0.313 10.875 1.250 x 4.875 #10, 12
66-550 0.055 0.375 8.000 0.375 12.875 1.250 x 4.875 #15, 18, 20
66-553 0.055 0.375 10.000 0.375 14.875 1.250 x 4.875 #15, 18, 20
ASME B107-15 Fed’l Spec. GGG-S-121e

Screwdrivers and Nut Drivers

Standard Tip, Round Shank
A1 A2 B C D
Tip Tip Blade Blade Overall E
Product Thickness, Width, Length, Dia., Length, Handle Size Screw
Number Inches Inches Inches Inches Inches Dia. x Length Size
66-502 0.037 0.188 3.000 0.188 7.750 1.125 x 3.750 #5, 6, 7
66-505 0.037 0.250 4.000 0.250 8.906 1.313 x 4.906 #8, 9
66-501 0.040 0.250 4.000 0.250 8.250 1.250 x 4.250 #8, 9
66-504 0.045 0.313 6.000 0.313 10.875 1.250 x 4.875 #12, 14, 16
66-509 0.050 0.375 10.000 0.375 15.438 1.375 x 5.438 #12, 14-24, 0.250-0.375
66-510 0.050 0.375 12.000 0.375 17.438 1.375 x 5.438 #12, 14-24, 0.250-0.375
66-507 0.055 0.375 8.000 0.375 12.875 1.250 x 4.875 #15, 18, 20
ASME B107-15 Fed’l Spec GGG-S-121e

8-14
 8
Electricians Screwdrivers

Cabinet Tip, Round Shank

A1 A2 B C D
Tip Tip Blade Blade Overall E
Product Thickness, Width, Length, Dia., Length, Handle Size Screw
Number Inches Inches Inches Inches Inches Dia. x Length Size
66-561 0.035 0.188 3.000 0.188 6.625 1.125 x 3.625 #5, 6, 7
66-563 0.035 0.188 4.000 0.188 7.750 1.125 x 3.625 #5, 6, 7
66-564 0.035 0.188 6.000 0.188 9.625 1.125 x 3.625 #5, 6, 7
66-567 0.035 0.188 8.000 0.188 11.625 1.125 x 3.625 #5, 6, 7
66-570 0.035 0.188 10.000 0.188 13.625 1.125 x 3.625 #5, 6, 7
Screwdrivers and Nut Drivers

Phillips Tip, Round Shank

A1 A2 B C D E
Product Tip Tip Width, Blade Length, Blade Dia., Overall Length, Handle Size Screw
Number Size Inches Inches Inches Inches Dia. x Length Size
66-521 #2 0.250 1.313 0.250 3.063 1.250 x 1.750 P2
66-524 #1 0.188 3.000 0.188 6.625 1.125 x 3.625 P1
66-527 #2 0.250 4.000 0.250 8.250 1.125 x 4.250 P2
66-526 #2 0.250 6.000 0.250 10.906 1.313 x 4.906 P2
66-528 #2 0.250 12.000 0.250 16.906 1.125 x 3.625 P2
66-530 #3 0.313 6.000 0.313 10.875 1.250 x 4.875 P3
ASME B107-15 Fed’l Spec GGG-S-121e

8-15 Always wear eye protection when near tools in use.

 8
Nut Driver Sets

Set 66-743
7 Pc. T-Handle Nut Driver Set
Approximate Weight, 1.93 lbs.

Product Shank Size, Product Shank Size,

Number Inches Number Inches
66-706 0.188 66-712 0.375
66-708 0.250 66-714 0.438
66-710 0.313 66-716 0.500
66-711 0.344

Tray

Screwdrivers and Nut Drivers

Set 66-747 METRIC
7 Pc. T-Handle Nut Driver Set
Approximate Weight, 1.93 lbs.
Product Shank Size, Product Shank Size,
Number mm Number mm
66-731 5 66-736 9
66-733 6 66-737 10
66-734 7 66-738 11
66-735 8

Tray

8-16
 8
Nut Driver Sets

Set 66-843
7 Pc. Hollow Shaft Nut Driver Set
Approximate Weight, 1.45 lbs.
Product Shank Size, Product Shank Size,
Number Inches Number Inches
66-808 0.250 66-812 0.375
66-809 0.281 66-814 0.438
66-810 0.313 66-816 0.500
66-811 0.344

Vinyl Roll
29-426
Screwdrivers and Nut Drivers

Set 66-845
11 Pc. Hollow Shaft Nut Driver Set
Approximate Weight, 2.31 lbs.

Product Shank Size, Product Shank Size,

Number Inches Number Inches
66-806 0.188 66-812 0.375
66-807 0.219 66-814 0.438
66-808 0.250 66-816 0.500
66-809 0.281 66-818 0.563
66-810 0.313 66-820 0.625
66-811 0.344

Vinyl Roll
29-456

Set 66-843A
7 Pc. Solid Shaft Nut Driver Set
Approximate Weight, 3.63 lbs.
Product Shank Size, Product Shank Size,
Number Inches Number Inches
66-806A 0.188 66-812A 0.375
66-808A 0.250 66-814A 0.438
66-810A 0.313 66-816A 0.500
66-811A 0.344 Vinyl Pouch

8-17 Always wear eye protection when near tools in use.

 8
Nut Driver Sets

Set 66-847 METRIC

7 Pc. Hollow Shaft Nut Driver Set
Approximate Weight, 1.40 lbs.
Product Shank Size, Product Shank Size,
Number mm Number mm
66-831 5 66-835 8
66-832 5.5 66-836 9
66-833 6 66-837 10
66-834 7

Vinyl Roll
29-426

Screwdrivers and Nut Drivers

Set 66-848 METRIC
11 Pc. Hollow Shaft Nut Driver Set
Approximate Weight, 1.98 lbs.
Product Shank Size, Product Shank Size,
Number mm Number mm
66-829 4 66-836 9
66-831 5 66-837 10
66-832 5.5 66-838 11
66-833 6 66-839 12
66-834 7 66-840 13
66-835 8

Vinyl Roll
29-456

Set 66-847A METRIC

7 Pc. Solid Shaft Nut Driver Set
Approximate Weight, 3.63 lbs.
Product Shank Size, Product Shank Size,
Number mm Number mm
66-831A 5 66-836A 9
66-833A 6 66-837A 10
66-834A 7 66-838A 11
66-835A 8 Vinyl Pouch

8-18
 8
Nut Drivers

T-Handle Nut Drivers

A B C D E
Product Opening, Weight, Drive Shaft Handle Size Overall Bolt Handle
Number Inches lbs. End (in.) Length (in.) Dia. x Length (in.) Length (in.) Clearance Color
66-706 0.188 0.19 0.314 4.500 0.800 x 3.750 6.500 0.152 Black
66-708 0.250 0.19 0.393 4.500 0.800 x 3.750 6.500 0.152 Red
66-710 0.313 0.30 0.463 4.000 1.000 x 4.700 6.500 0.214 Amber
66-711 0.344 0.30 0.493 4.000 1.000 x 4.700 6.500 0.214 Green
66-712 0.375 0.30 0.533 4.000 1.000 x 4.700 6.500 0.214 Blue
66-714 0.438 0.44 0.603 4.000 1.000 x 4.700 6.500 0.333 Brown
66-716 0.500 0.45 0.683 4.000 1.000 x 4.700 6.500 0.333 Red
ASME B107.12 Fed’l Spec. GGG-W-657c
Screwdrivers and Nut Drivers

T-Handle Nut Drivers METRIC

A B C D E
Product Opening, Weight, Drive Shaft Handle Size Overall Bolt Handle
Number mm lbs. End (in.) Length (in.) Dia. x Length (in.) Length (in.) Clearance Color
66-731 5 0.19 0.314 4.500 0.800 x 3.750 6.500 0.152 Black
66-733 6 0.19 0.359 4.500 0.800 x 3.750 6.500 0.152 Red
66-734 7 0.30 0.411 4.000 1.000 x 4.700 6.500 0.214 Orange
66-735 8 0.30 0.463 4.000 1.000 x 4.700 6.500 0.214 Amber
66-736 9 0.30 0.510 4.000 1.000 x 4.700 6.500 0.214 Green
66-737 10 0.44 0.556 4.000 1.000 x 4.700 6.500 0.333 Blue
66-738 11 0.44 0.603 4.000 1.000 x 4.700 6.500 0.333 Brown

8-19 Always wear eye protection when near tools in use.

 8
Nut Drivers

Hollow Shaft Nut Drivers, 6-Point Opening

A B C D E
Product Opening, Weight, Drive Shaft Handle Size Overall Bolt Handle
Number Inches lbs. End (in.) Length (in.) Dia. x Length (in.) Length (in.) Clearance Color
66-806 0.188 0.12 0.328 3.000 1.000 x 3.600 6.620 0.140 Black
66-807 0.219 0.12 0.373 3.000 1.000 x 3.600 6.620 0.140 Brown
66-808 0.250 0.13 0.421 3.000 1.000 x 3.600 6.620 0.196 Red
66-809 0.281 0.13 0.451 3.000 1.000 x 3.600 6.620 0.203 Orange
66-810 0.313 0.14 0.490 3.000 1.000 x 3.600 6.620 0.196 Amber
66-811 0.344 0.14 0.531 3.000 1.000 x 3.600 6.620 0.203 Green
66-812 0.375 0.16 0.570 3.000 1.000 x 3.600 6.620 0.272 Blue
66-814 0.438 0.19 0.648 3.000 1.060 x 4.000 7.000 0.272 Brown
66-816 0.500 0.21 0.718 3.000 1.060 x 4.000 7.000 0.333 Red
66-818 0.563 0.24 0.806 4.000 1.190 x 4.500 8.500 0.397 Red
66-820 0.625 0.27 0.890 4.000 1.190 x 4.500 8.500 0.453 Red
ASME B107.12 Fed’l Spec. GGG-W-657c

Screwdrivers and Nut Drivers

Hollow Shaft Nut Drivers, 6-Point Opening METRIC
A B C D E
Product Opening, Weight, Drive Shaft Handle Size Overall Bolt
Number mm lbs. End Length Dia. x Length Length Clearance
66-829 4 0.10 8.0 76.0 25.0 x 91.0 167.0 4.0
66-831 5 0.12 10.0 76.0 25.0 x 91.0 167.0 4.0
66-832 5.5 0.12 10.0 76.0 25.0 x 91.0 167.0 4.0
66-833 6 0.13 11.0 76.0 25.0 x 91.0 167.0 5.0
66-834 7 0.13 12.0 76.0 25.0 x 91.0 167.0 5.0
66-835 8 0.14 13.0 76.0 25.0 x 91.0 167.0 5.0
66-836 9 0.14 14.0 76.0 25.0 x 91.0 167.0 5.0
66-837 10 0.15 15.0 76.0 26.0 x 101.0 177.0 7.0
66-838 11 0.18 17.0 76.0 26.0 x 101.0 177.0 7.0
66-839 12 0.20 17.0 76.0 26.0 x 101.0 177.0 7.0
66-840 13 0.27 18.0 76.0 26.0 x 101.0 177.0 8.0

8-20
 8
Nut Drivers

Solid Shaft Nut Drivers, 6-Point Opening

A B C D E
Product Opening, Weight, Drive Shaft Handle Size Overall Bolt Handle
Number Inches lbs. End (in.) Length (in.) Dia. x Length (in.) Length (in.) Clearance (in.) Color
66-806A 0.188 0.12 0.328 3.000 1.000 x 3.600 6.620 0.140 Black
66-808A 0.250 0.13 0.421 3.000 1.000 x 3.600 6.620 0.196 Red
66-810A 0.313 0.14 0.490 3.000 1.000 x 3.600 6.620 0.196 Amber
66-811A 0.344 0.14 0.531 3.000 1.000 x 3.600 6.620 0.203 Green
66-812A 0.375 0.16 0.570 3.000 1.000 x 3.600 6.620 0.272 Blue
66-814A 0.438 0.19 0.648 3.000 1.060 x 4.000 7.000 0.272 Brown
66-816A 0.500 0.21 0.718 3.000 1.060 x 4.000 7.000 0.333 Red
ASME B107.12 Fed’l Spec. GGG-W-657c
Screwdrivers and Nut Drivers

Solid Shaft Nut Drivers, 6-Point Opening METRIC

A B C D E
Product Opening, Weight, Drive Shaft Handle Size Overall Bolt
Number mm lbs. End (mm) Length (mm) Dia. x Length (mm) Length (mm) Clearance (mm)
66-831A 5 0.12 10.0 76.0 25.0 x 91.0 167.0 4.0
66-833A 6 0.13 11.0 76.0 25.0 x 91.0 167.0 5.0
66-834A 7 0.13 12.0 76.0 25.0 x 91.0 167.0 5.0
66-835A 8 0.14 13.0 76.0 25.0 x 91.0 167.0 5.0
66-836A 9 0.14 14.0 76.0 25.0 x 91.0 167.0 5.0
66-837A 10 0.15 15.0 76.0 26.0 x 101.0 177.0 7.0
66-838A 11 0.18 17.0 76.0 26.0 x 101.0 177.0 7.0

8-21 Always wear eye protection when near tools in use.

 8
Screw & Nut Starters

Set 66-962
3 Pc. Screw & Nut Starter Set
Approximate Weight, 0.02 lbs.
Product
Number Starter Type
66-924 5 for Slotted Screws
66-933 5 for Phillips Screws
66-943 5 for Nuts

Vinyl Roll
29-472

Screwdrivers and Nut Drivers

Screw and Nut Starters
Choose from either slotted or Phillips head screw starters. Blade
and bit grip screw head with 15 pound pull. They release
automatically and reset as screw is tightened. Magnet on handle
makes this tool a handy retriever when screws fall into
inaccessible places. Can be used on wide range of screw sizes.

Screw Starters, Slotted Screws

Product Length, Weight,
Number Inches lbs.
66-921 2.500 0.02
66-924 5.000 0.04
66-927 9.000 0.06
Fed’l Spec. GGG-S-121e

Screw Starters, Phillips Screws

Product Length, Weight,
Number Inches lbs.
66-933 5.000 0.05
66-936 9.000 0.08

Nut Starter, Hex Nuts

Product Length, Weight,
Number Inches lbs.
66-943 5.000 0.05

8-22
 8
Offset Screwdrivers

Set 66-580
Ratcheting Screwdriver Handle with 6 Bits Set
Ratcheting Screwdriver has storage in handle for six bits. Includes
two slotted 5-6, 10-12, two Phillips #1, #2, and two Torx T-10, T-15
bits. Approximate Weight, 1.20 lbs.

Offset, Ratcheting
Product Tip Width, Tip Shank Length, Weight,
Number Inches Size Inches lbs.
66-598 0.250 #2 3.750 0.32
Screwdrivers and Nut Drivers

Offset, Standard Tip

Product Tip Width, Shank Length, Weight,
Number Inches Inches lbs.
66-601 0.156 3.000 0.06
66-603 0.250 4.000 0.08
66-605 0.313 5.000 0.12
66-607 0.375 6.000 0.20

Offset, Phillips Tip

Product Phillips Shank Length, Weight,
Number Numbers Inches lbs.
66-609 1&2 4.500 0.10
66-613 3&4 6.500 0.16

SAFETY NOTICE
NEVER USE SCREWDRIVERS AS PRY BARS, OR FOR
PUNCHING OR CHISELING. BE SURE TO MATCH TIP SIZE OF
SCREW SLOT. NEVER USE SCREWDRIVERS WITH CHIPPED OR
ROUNDED TIPS. NEVER SUBSTITUTE A STANDARD PHILLIPS
SCREWDRIVER WHEN DRIVING POSIDRIV® SCREWS.

8-23 Always wear eye protection when near tools in use.

 PLIERS AND SNIPS 9
Locking Pliers
STRENGTH Slip Joint Pliers
Aligned teeth provide superior
gripping power over standard vertical teeth Electrician’s Pliers
Specialty Pliers
STRENGTH Retaining Ring Pliers
Diamond serrated jaws
provide a firm grip Wire Twisting Pliers
Aviation Snips
Cutting Snips

ACCESS
Tapered nose allows access to
minimal clearance areas while
maintaining gripping ability

SPEED
Easy release pliers lock with one hand
and release with the push of the handle

ACCESS
Wide adjusting screw
for adjusting the
jaw opening and
ACCESS locking pressure
Cushioned grip allows for
increased comfort and
reduces fatigue
 9
Tongue & Groove Pliers

Tongue & Groove Pliers

Precision milled undercut rib joint provides positive interlock
between the two halves, eliminating separation. Angled teeth
provide superior gripping power over standard teeth. Specially
designed fastener ensures permanent assembly and smooth
operation.
A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-717** 5.000 1.000 0.750 0.188 0.13
67-777** 7.000 1.625 1.250 0.375 0.48
67-779** 10.000 1.500 1.594 0.328 0.91
67-781† 12.000 1.938 2.500 0.517 1.49
67-783† 16.000 4.500 2.313 0.594 2.61
67-785 20.000 4.750 3.750 0.625 3.80
**ASME B107.23m †Fed’l Spec. GGG-P-471e

Pipewrench Tongue & Groove Pliers

Pipe wrench design with 90º offset head provides up to 20% more
leverage.
Pliers and Snips

A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
9 67-789 10.000 1.688 1.313 0.422 0.92
67-791 12.750 2.344 1.703 0.516 1.61

Midget Angle Nose Ignition Pliers

Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-830 5.250 0.700 0.875 0.175 0.10

Battery Pliers
Jaws forged at 30° angle to grips, making nuts on battery terminal
clamps easily accessible.
Product Overall Weight,
Number Length lbs.
67-831 7.500 0.42
ASME B107.23m

9-1 Always wear eye protection when near tools in use.

 9
Slip Joint Pliers

Slip Joint Pliers

A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-667 6.500 1.913 1.313 0.390 0.42
67-669 8.000 2.125 1.406 0.390 0.53
67-671 10.000 2.125 1.406 0.484 0.87
ASME B107.23m

Slip Joint Pliers, Plain Handle

A B C D
Product Overall Jaw Jaw Jaw Weight.
Number Length Length Width Thickness lbs.
67-657 6.500 1.813 1.313 0.390 0.41
67-659 8.000 2.125 1.406 0.390 0.85
67-661 10.000 2.125 1.406 0.484 0.85

Pliers and Snips

Slip Joint Pliers, Thin Nose
A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-687 6.500 1.813 1.313 0.215 0.40
ASME B107.23m

Hose Clamp Pliers

Natural Finish.
A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-699 8.000 2.063 1.406 0.390 0.53
ASME B107.23m

9-2
 9
Diagonal Pliers

Long Reach High Leverage Diagonal Pliers

Extra long handle provides high leverage cutting capabilities with less
effort. Extra wide handle provides more comfort and reduces hand
fatigue. 30˚ angled head provides access to hard to reach areas.

A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-101 11.125 1.000 1.156 0.468 0.94

Diagonal Pliers, Angled Head, Heavy Duty

A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-123 8.000 0.875 1.125 0.500 0.57
ASME B107.11m
Pliers and Snips

Diagonal Pliers, Heavy Duty

A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-109 7.125 0.750 1.125 0.438 0.43
67-113 8.000 0.875 1.125 0.500 0.56
ASME B107.11m

Long Reach Diagonal Pliers

Gripping tips provide cutting and gripping capabilities in one pliers.

A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-103 11.125 0.843 0.984 0.390 0.74

Diagonal Pliers
Precision machined cutting edges meet at the tip, providing
improved cutting performance. Induction hardened cutting edge
ensures maximum durability and long life.
A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-184 4.500 0.500 0.333 0.250 0.10
67-155 4.250 0.563 0.438 0.250 0.15
67-159 5.125 0.750 0.688 0.375 0.24
67-161 6.375 0.875 0.750 0.375 0.33
67-163 7.438 1.000 0.875 0.438 0.58
ASME B107.11m

9-3 Always wear eye protection when near tools in use.

 9
Diagonal, Lineman’s Pliers

Diagonal Pliers with Spring

A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-183 4.468 0.563 0.438 0.250 0.13
67-173 5.125 0.750 0.688 0.375 0.25
67-175 6.313 0.875 0.750 0.438 0.35
ASME B107.11m

Diagonal Pliers, Plastic Cutting with Spring

A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-195 6.375 0.875 0.750 0.375 0.39
67-197 7.438 1.125 0.888 0.438 0.63

Pliers and Snips

Lineman’s Pliers
Precision machined cutting edges meet at the hinge, providing
improved cutting performance. Induction hardened cutting edge
ensures maximum durability and long life. Diamond serrated jaws
provides a firm grip.
A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-063 6.438 1.000 0.938 0.438 0.49
67-065 7.375 1.250 1.000 0.500 0.68
67-067 8.375 1.313 1.000 0.563 1.01
67-069 9.500 1.500 1.250 0.563 1.15
ASME B107.20m

Ironworkers Plier
A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-071 9.500 1.500 1.300 0.600 0.98
ASME B107.20m

End Cutting Plier

A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-535 7.500 0.375 1.625 0.500 0.73
ASME B107.11m

9-4
 9
Chain Nose Pliers

Long Reach Chain Nose Pliers

Extra long handle allows greater access to confined, restricted areas
and provides more holding power at the tip with less effort.

A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-240 11.563 2.813 0.718 0.406 0.63

Long Reach Bent Chain Nose Pliers

Extra long handle allows greater access to confined, restricted
areas and provides more holding power at the tip with less effort.
Bent nose design allows access around obstructions.

A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
Pliers and Snips

67-241 11.375 2.563 0.718 0.406 0.62

Chain Nose Pliers with Wire Cutter

Tapered nose with diamond serrated edges allows access to minimal
clearance areas, providing gripping ability. Precision machined cutting
edges meet at the hinge, providing improved cutting performance.
Induction hardened cutting edge gives maximum durability and long life.
A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-303 5.625 1.500 0.688 0.375 0.18
67-305 6.375 2.000 0.688 0.375 0.31
67-307 7.750 2.250 0.813 0.438 0.39
ASME B107.13m

Chain Nose Pliers

A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-253 4.750 1.063 0.438 0.375 0.11
67-255 5.313 1.630 0.750 0.375 0.23
67-257 6.313 2.000 0.688 0.375 0.32
67-259 7.875 2.250 0.813 0.435 0.37
ASME B107.13m

9-5 Always wear eye protection when near tools in use.

 9
Chain Nose, Needle Nose Pliers

Chain Nose Pliers with Wire Stripper

A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-331 7.813 2.310 0.813 0.438 0.83
ASME B107.13m

Chain Nose Pliers, Bent

A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-401 5.875 1.313 0.688 0.375 0.26
ASME B107.13m

Pliers and Snips

Needle Nose Pliers, Long Thin
A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-357 5.875 2.063 0.438 0.250 0.25
67-367 6.875 2.250 0.688 0.375 0.29
ASME B107.13m

Needle Nose Pliers, Long Thin with Spring

A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-369 6.875 2.250 0.688 0.375 0.30
ASME B107.13m

9-6
 9
Needle Nose, Specialty Pliers

Needle Nose Plier, Long Extra Thin

A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-370 6.250 2.000 0.563 0.313 0.21

Chain Nose Pliers, Long

A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-323 8.000 1.250 0.625 0.438 0.35
Pliers and Snips

ASME B107.13m

Flat Nose Pliers

A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-441 6.500 2.063 1.625 0.500 0.31

Duckbill Pliers
A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-503 8.000 1.375 0.500 0.375 0.43
ASME B107.13m

9-7 Always wear eye protection when near tools in use.

 9
Locking Pliers

Set 67-404
3 Pc. Quick Release Locking Pliers Set
Approximate Weight, 2.80 lbs.
Product
Number Description
67-436 6" Locking Pliers, Long Nose
67-405 5" Locking Pliers, Curved Jaw
67-460 10" Locking Pliers, Straight Jaw
Tool Roll

Curved Jaw Quick Release Locking Pliers

Pliers and Snips

A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-405 5.731 1.718 1.651 0.338 0.430
67-407 7.446 2.184 2.436 0.630 0.950
67-410 9.131 2.425 2.694 0.644 1.340

Straight Jaw Quick Release Locking Pliers

A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-457 7.446 2.184 2.436 0.630 0.950
67-460 9.131 2.425 2.694 0.644 1.340

Long Nose Quick Release Locking Pliers

A B C D
Product Overall Jaw Jaw Jaw Weight,
Number Length Length Width Thickness lbs.
67-436 6.873 2.824 1.668 0.183 0.510

9-8
 9
Specialty Pliers

Lock Ring Pliers, Standard Design

Right angle jaw tips are knurled on outside surface to hold rings
securely. Tension spring closes jaws. 1-1/2" maximum jaw opening.
Product Overall Weight,
Number Length lbs.
67-555 9.000 0.53

Lock Ring Pliers, Parallel Jaws, Compound Leverage

Right angle jaw tips are knurled on outside surface to hold rings
securely. Tension spring closes jaws. 1" maximum jaw opening.
Product Overall Weight,
Number Length lbs.
67-565 10.000 0.59
Fed’l Spec. GGG-P-471e
Pliers and Snips

Cable Cutters
For use with copper or aluminum cable up to 2/0 gauge. Jamb nut
on joint helps maintain even pressure on inside surface of blades.
Ground blades cut easily and cleanly. Cushion grips for comfort. Not
for use on steel.
Product Overall Weight,
Number Length lbs.
67-850 7.500 0.58

Electrical Connector Pliers

For removal and installion of electrical connectors. Soft, non-maring
pliers have tonque and groove design.
Product Overall Weight,
Number Length lbs.
67-852 10.000 1.00

CAUTION:
Plastic “cushion” grips are intended for comfort and do not
protect from electric shock. Use only those pliers with insulated
handles when working near “hot” wires.

Do not attempt to cut hardened wire. Always cut at right angles;

do not “rock” tool from side to side.

Wire and other fabricated metal products may snap or “spring”

when being cut.

9-9 Always wear eye protection when near tools in use.

 9
Wire Stripping Pliers

Wire Stripper/Cutter, with Lock & Spring Return

Precision-ground stripping stations. Scissors-action cutter.
Product Length, Strips Wire Weight,
Number Inches Sizes, No. lbs.
67-889 6.125 10, 12, 14, 16, 18, 20 0.37

Wire Stripper/Cutter, with Spring Return

Precision-ground stripping stations. Scissors-action cutter.
Product Length, Strips Wire Weight,
Number Inches Sizes, No. lbs.
67-891 6.125 22, 24, 26, 28, 30 0.38

Pliers and Snips

Wire Strippers, with Spring Return
Track adjustment for setting strip size. Slide lock.
Product Length, Strips Wire Weight,
Number Inches Sizes, No. lbs.
67-895 5.250 10, 12, 14, 16, 18, 20 0.21

Electrician’s Stripper/Cutter/Crimper Pliers

Serrated pliers for pulling any looping wire. Precision-ground stripping
stations. Longer, curved cutter required less force, handles heavier
wire.
Product Length, Strips Wire Crimps Wire Cuts Bolt Weight
Number Inches Sizes, No. Sizes, No. Sizes lbs.
67-901 8.250 10, 12, 14, 16, Auto 7 & 8 mm, 4-40, 5-40, 6-32,
18, 20, 22 22-18, 16-10 8-32,10-32, 10-24 0.44

9-10
 9
Wire Stripping Pliers

Electrician’s Stripper/Cutter/Crimper Pliers

Insulated and non-insulated crimp stations. Curved cutter reduces
force required to cut.
Product Length, Strips Wire Crimps Wire Cuts Bolt Weight,
Number Inches Sizes, No. Sizes, No. Sizes lbs.
67-905 8.625 10, 12, 14,16, Auto 7 & 8 mm, 4-40, 6-32, 8-32,
18, 20, 22 22-14, 12-10 10-32, 10-24 0.48

Electrician’s Stripper/Cutter/Crimper Pliers

Insulated and non-insulated crimp stations including weatherpack ter-
minals. Anvil-type cutter.
Product Length, Strips Wire Crimps Wire Cuts Bolt Weight,
Number Inches Sizes, No. Sizes, No. Sizes lbs.
67-908 9.500 10, 12, 14, Auto 7 & 8 mm,
16, 18 18, 16, 14, 12,10 none 0.62
Pliers and Snips

Ergo Super Stripper Cutter

Long, curved cutter requires less force to cut. Lock protects cutting
and stripping stations. Precision-ground stripping stations.
Product Length, Strips Wire Cuts Bolt Weight,
Number Inches Sizes, No. Sizes lbs.
67-910 7.250 10-18 AWG solid wire 6-32
12-20 AWG stranded wire 8-32 0.31

Romex Strippers
“Staggered” cutting blade produces clean, sure cut with 30-50% less
effort. Precision-ground stripping stations. Serrated pliers nose.
Product Length, Strips Wire Cuts Bolt Weight,
Number Inches Sizes, No. Sizes lbs.
67-911 7.750 10-2 AWG 6-32, 8-32 0.40
67-912 7.750 12-2, 14-2 type NM-B Cable 6-32, 8-32 0.40

9-11 Always wear eye protection when near tools in use.

 9
Retaining Ring Pliers

Retaining Ring Pliers Selection Guide

Note: Always select the largest diameter tip that will fit the retaining ring. To obtain correct pliers or retaining ring number, measure diameter
of shaft (external) or bore (internal) where ring is to be installed or removed, and refer to table below. Retaining ring dash numbers are
expressed in hundredths of an inch. Example: 5101-75 identifies Truarc’s external ring series 5101 for a shaft approximately 0.750" (3/4") O.D.

Retaining Ring Manufacturers Cross Reference

EXTERNAL INTERNAL
Tip Tip Product For Retaining Rings by following manutacturers For Retaining Rings by following manutacturers
Dia., Angle
In Int./Ext. Shaft Dia., Anderton Dash Bore Dia., Anderton Dash
External Internal Convertible Inches United Industro Truarc Number Inches United Industro Truarc Number
0° 67-917 67-965 — 1400 3100 5100 N1300 3000X N5000
.025 45° — — — 3/16 to 15/64 1401 3101 5101 -18 thru -23 1/4 to 5/16 N1301 3001X N5001 -25 thru -31
1402 5102 N1302 N5002
90° — — — 5/8 1308 4000 5008 -62
0° 67-923 67-971 68-025 1/4 to 21/32 1400 3100 5100
1401 3101 5101 -25 thru -66 3/8 to 9/16 N1300 3000X N5000
.038 45° — 67-973 68-026
1402 5102 N1301 3001X N5001 -37 thru -56
90° 67-927 — 68-027 1/2 to 1 1408 4100 5108 -50 thru -100 1 to 1.02 N1302 N5002 -100 thru -102
1/8 to 5/32 1440 5555 -12 thru -15 3/4 to 1 1308 4000 5008 -75 thru -100
0° — — 68-028 11/16 to 7/8 1400 3100 5100 -68 thru -87 5/8 to 1.02 N1300 3000X N5000
.047 45° — — 68-029 1401 3101 5101 N1301 3001X N5001 -62 thru -102
13/16 to 1 1408 4100 5108 -81 thru -100 1 to 1.02 N1302 N5002 -100 thru -102
90° — — 68-030 3/16 to 1/4 1440 5555 -18 thru -25 1-1/16 to 1-3/8 1308 4000 5008 -106 thru -137
0° 67-929 67-977 68-031 15/16 to 1-7/16 1400 3100 5100 -93 thru -143 1-1/16 to 1-3/4 N1300 3000X N5000
.070 45° — — 68-032 1401 3101 5101 N1301 3001X N5001 -106 thru -175
1 to 1-7/16 1402 5102 -100 thru -143 N1302 N5002
90° — — 68-033 1-1/16 to 2 1408 4100 5108 -106 thru -200 1-7/16 to 2 1308 4000 5008 -143 thru -200
5/16 to 5/8 1440 5555 -31 thru -62
0° — 67-983 68-034 1-1/2 to 3-1/2 1401 3100 5100 -150 thru -350 1-3/16 to 3 N1300 3000X N5000 -181 thru -300
1402 5102 N1302 3001X N5002

Pliers and Snips

.090 45° — — 68-035
1-1/2 to 1-3/4 1401 3101 5101 -150 thru -175
90° — — 68-036 2-1/16 to 3 1308 4000 5008 -206 thru -300
2-5/32 to 3-11/32 1408 4101 5108 -215 thru -334
0° 67-935 — — 1400 3100 5100
.115 45° — — — 1-1/2 to 3-1/2 1401 3101 5101 -150 thru -350
1402 5102
90° — — — 2-1/8 to 3-11/32 1408 4100 5108 -215 thru -334

Retaining Ring Pliers, External

For use with external retaining rings only.
Product
Number Description
67-917 .025 Tip, External, Straight
67-923 .038 Tip, External, Straight
67-927 .038 Tip, External, 90°
67-929 .070 Tip, External, Straight
67-935 .115 Tip, External, Straight
ASME B107.19 Fed’l Spec. GGG-P-480e

Retaining Ring Pliers, Internal

For use with internal retaining rings only.
Product
Number Description
67-965 .025 Tip, Internal, Straight
67-971 .038 Tip, Internal, Straight
67-973 .038 Tip, Internal, 45°
67-977 .070 Tip, Internal, Straight
67-983 .090 Tip, Internal, Straight
ASME B107.19 Fed’l Spec. GGG-P-480e

9-12
 9
Retaining Ring Pliers

Set 68-015
6 Pc. Qtr-Turn™ Convertible Retaining Ring Pliers Set
For use with either external or internal retaining rings. For fast and
easy conversion, make a 1/4 turn to release halves, then position
into alternate slot - another 1/4 turn and it’s back together. No
threads to align or tighten. For 1/4” - 2” rings. Furnished in blow-
molded plastic case.
Approximate Weight, 2.50 lbs.
Product
Number Description
68-001 .038 Tip, 1/4 Convertible, Straight
68-003 .038 Tip, 1/4 Convertible, 90°
68-004 .047 Tip, 1/4 Convertible, Straight
68-006 .047 Tip, 1/4 Convertible, 90°
68-007 .070 Tip, 1/4 Convertible, Straight
68-009 .070 Tip, 1/4 Convertible, 90°

Set 68-016
12 Pc. Qtr-Turn™ Convertible Retaining Ring Pliers Set
Pliers and Snips

For use with either external or internal retaining rings. For fast and
easy conversion, make a 1/4 turn to release halves, then position
into alternate slot - another 1/4 turn and it’s back together. No
threads to align or tighten. For 1/4” - 3-1/2” rings. Furnished in
blow-molded plastic case.
Approximate Weight, 5.00 lbs.
Product
Number Description
68-001 .038 Tip, 1/4 Convertible, Straight
68-002 .038 Tip, 1/4 Convertible, 45°
68-003 .038 Tip, 1/4 Convertible, 90°
68-004 .047 Tip, 1/4 Convertible, Straight
68-005 .047 Tip, 1/4 Convertible, 45°
68-006 .047 Tip, 1/4 Convertible, 90°
68-007 .070 Tip, 1/4 Convertible, Straight
68-008 .070 Tip, 1/4 Convertible, 45°
68-009 .070 Tip, 1/4 Convertible, 90
68-010 .090 Tip, 1/4 Convertible, Straight
68-011 .090 Tip, 1/4 Convertible, 45°
68-012 .090 Tip, 1/4 Convertible, 90°

9-13 Always wear eye protection when near tools in use.

 9
Retaining Ring Pliers

Retaining Ring Pliers, Internal/External

Qtr-Turn™ Convertible
For use with either external or internal retaining rings. For fast and
easy conversion, make a 1/4 turn to release halves, then position
into alternate slot - another 1/4 turn and it’s back together. No
threads to align or tighten. For 1/4” - 3-1/2” rings.
Product Weight,
Number Description lbs.
68-001 .038 Tip, 1/4 Convertible, Straight 0.19
68-002 .038 Tip, 1/4 Convertible, 45° 0.19
68-003 .038 Tip, 1/4 Convertible, 90° 0.19
68-004 .047 Tip, 1/4 Convertible, Straight 0.19
68-005 .047 Tip, 1/4 Convertible, 45° 0.19
68-006 .047 Tip, 1/4 Convertible, 90° 0.19
68-007 .070 Tip, 1/4 Convertible, Straight 0.31
68-008 .070 Tip, 1/4 Convertible, 45° 0.31
68-009 .070 Tip, 1/4 Convertible, 90 0.31
68-010 .090 Tip, 1/4 Convertible, Straight 0.56
68-011 .090 Tip, 1/4 Convertible, 45° 0.56
68-012 .090 Tip, 1/4 Convertible, 90° 0.56

Pliers and Snips

Set 68-056
6 Pc. Cam-Lock™ Convertible Retaining Ring Plier Set
For 1/4” - 2” internal and external rings. Patented design allows for
quick change-over from internal to external. Furnished in blow-
molded plastic case.
Approximate Weight, 2.50 lbs.
Product
Number Description
68-045 .038 Tip, Cam-Lock Convertible, 18°
68-046 .038 Tip, Cam-Lock Convertible, 90°
68-047 .047 Tip, Cam-Lock Convertible, 18°
68-048 .047 Tip, Cam-Lock Convertible, 90°
68-049 .070 Tip, Cam-Lock Convertible, 18°
68-050 .070 Tip, Cam-Lock Convertible, 90°

9-14
 9
Retaining Ring Pliers

Retaining Ring Pliers, Internal/External Cam-Lock™

Convertible
For use with either external or internal retaining rings. For fast and easy
conversion, compress handles slightly, depress shift button, and turn knob.
For 1/4” - 2” internal and external rings. Patented design allows for quick
change-over from internal to external.
Product Weight,
Number Description lbs.
68-045 .038 Tip, Cam-Lock Convertible, 18° 0.19
68-046 .038 Tip, Cam-Lock Convertible, 90° 0.19
68-047 .047 Tip, Cam-Lock Convertible, 18° 0.19
68-048 .047 Tip, Cam-Lock Convertible, 90° 0.19
68-049 .070 Tip, Cam-Lock Convertible, 18° 0.31
68-050 .070 Tip, Cam-Lock Convertible, 90° 0.31

Set 68-065
Light Duty Retaining Ring Pliers Set
Pliers and Snips

Precision-ground replaceable tips. Spring return.

Contents: Two replaceable tip Retaining Ring Pliers-one external (for shaft
diameters 3/8" - 2”), one internal (for bore diameters 3/8" - 2"). Includes
68-067 replaceable tip set. Comes complete in plastic box (pliers not sold
separately).
Approximate Weight, 0.73 Ibs.

Replacement Tip Set 68-067

Precision-ground replaceable tips. Designed to be used with 68-065
replaceable tip Retaining Ring Pliers Set.
Contents: 8 pairs of color coded interchangeable replaceable tips.
Approximate Weight, 0.04 Ibs.
2 pairs, straight, .047 dia., Silver 2 pairs, 45° angle, .047 dia., Silver
2 pairs, straight, .070 dia., Gold 2 pairs, 90° angle, .038 dia., Black
ASME B107.19 Fed’l Spec. GGG-P-480e

9-15 Always wear eye protection when near tools in use.

 9
Retaining Ring Pliers

Set 68-079
6 Pc. Internal/External Convertible Pliers Set
3 Pliers and 3 Replacement Tip Sets in blow-molded plastic case.
Approximate Weight, 3.48 lbs.
Includes:
Plier Number For Shaft & Bore Dia., In.
68-069 1/8 to 1
68-070 1/4 to 2
68-071 1-1/2 to 4
Tip Set Number For Shaft & Bore Dia., In.
68-074 1/8 to 1
68-075 1/4 to 2
68-076 1-1/2 to 4
ASME B107.19 Fed’l Spec. GGG-P-480e
*New style available second quarter 2005

Retaining Ring Pliers, Internal/External Convertible

Easily convertible for both internal and external applications. Spring-loaded

Pliers and Snips

handles speed operation, and ratchet mechanism on largest size helps con-
trol large retaining rings. Replaceable tips are locked into place with set
screw. Hex Key is included.
Product Includes Tips, For Shafts & Weight,
Number Dia./Angle Bores, Dia. lbs.
68-069 .024/0°, .038/0°, .038/90°, 1/8 to 1 0.38
.047/0°, .047/90°
68-070 .038/0°, .038/90°, .047/0°, 1/4 to 2 0.59
.047/90°, .070/0°
68-071 .090/15°, .108/15°, .120/15°, 1-1/2 to 4 1.25
.090/90°, .108/90°, .120/90°
*New style available second quarter 2005

Replacement Tip Sets

For use with Internal/External Convertible Pliers. Each tip set is furnished in
plastic pouch, and includes hex key.
Product Includes Tips, Replacement Tips Weight,
Number Dia./Angle for Plier Number lbs.
68-074 .024/0°, .038/0°, .038/90°, 68-069 0.03
.047/0°, .047/90°
68-075 .038/0°, .038/90°, .047/0°, 68-070 0.04
.047/90°, .070/0°
68-076 .090/15°, .090/90°, .108/15°, 68-071 0.06
.108/90°, .120/15°, .120/90°
ASME B107.19 Fed’l Spec. GGG-P-480e

9-16
 9
Retaining Ring Pliers

Set 68-080
Heavy Duty Retaining Ring Pliers Set
Two replaceable tip Retaining Ring Pliers with spring ratchet lock assembly—
one external (for shaft diameters 1-1/2" through 3-3/4"), and one internal (for
bore diameters 2-7/16" through 4"). Includes 8 pairs of interchangeable tips,
and blow-molded plastic case. Approximate Weight, 2.47 lbs.

Interchangeable Tips: Interchangeable Tips:

1 pair, straight, .108" dia., Black 1 pair, straight, .120" dia., Silver
1 pair, 15° angle, .108" dia., Black 1 pair, 15° angle, .120" dia., Silver
1 pair, 45° angle, .108" dia., Black 1 pair, 45° angle, .120" dia., Silver
1 pair, 90° angle, .108" dia., Black 1 pair, 90° angle, .120" dia., Silver
ASME B107.19 Fed’l Spec. GGG-P-480e

Replacement Tip Set 68-082

For use with Heavy Duty Retaining Ring Pliers Set 68-080
Approximate Weight, 0.07 Ibs.
1 pair, straight, .108" dia., Black 1 pair, 45° angle, .108" dia., Black
1 pair, 15° angle, .108" dia., Black 1 pair, 90° angle, .108" dia., Black

Replacement Tip Set 68-083

For use with Heavy Duty Retaining Ring Pliers Set 68-080
Pliers and Snips

Approximate Weight, 0.07 Ibs.

1 pair, straight, .120" dia., Silver 1 pair, 45° angle, .120" dia., Silver
1 pair, 15° angle, .120" dia., Silver 1 pair, 90° angle, .120" dia., Silver

Super Heavy Duty Retaining Ring Pliers

Extra large retaining rings require a great deal of force to expand or com-
press during installation or removal. In addition to providing the leverage
necessary to handle big retaining rings, they feature a spring-loaded ratch-
et mechanism which allows ring to be compressed or expanded in gradual
“moves”. Tool then locks at desired size, requiring no hard pressure on
handle to maintain control of ring. Tools are furnished with straight tips.
Angled tips are also available. See Replacement Tip Sets.
Product
Number Description
68-090 .120 Tip, Internal, 16" Long
68-095 .120 Tip, External, 16" Long
ASME B107.19 Fed’l Spec. GGG-P-480e

Replacement Tip Set 68-092

For use with Super Heavy Duty Retaining Ring Pliers 68-090
Approximate Weight, 0.06 Ibs.
1 pair, straight, .120" dia., Black 1 pair, 90° angle, .120" dia., Black
1 pair, 45° angle, .120" dia., Black

Replacement Tip Set 68-097

For use with Super Heavy Duty Retaining Ring Pliers 68-095
Approximate Weight, 0.06 Ibs.
1 pair, straight, .120" dia., Black 1 pair, 45° angle, .120" dia., Black
1 pair, 90° angle, .120" dia., Black

Always wear eye protection when near tools in use.

9-17
 9
Wiretwister Pliers

Set 68-199
6 Pc. Wiretwister Pliers Set
3 Wiretwister Pliers and 3 spools of stainless steel safety wire in sizes:
0.020", 0.032" and 0.041". In fitted, blow-molded plastic case.
Approximate Weight, 3.32 lbs.
Pliers Sizes
6" Diagonal Nose 19" Deep Reech
9" Auto Right Hand

Wiretwister Pliers are essential tools for safety-wiring fasteners in engines,

gearboxes or any assembly where fasteners cannot be permitted to “back
out”, and/or when it is critical that precise torque is maintained. Cutting
knives are specially heat treated to ease cutting of stainless steel wire, and
diamond-pattern serrations on jaws grip wire securely.

Wiretwister, Manual, Diagonal Nose, RH Twist

Product For Wire Size, Length, Total Length, Weight,
Number Inches Inches Inches lbs.
68-163 0.020 to 0.041 6.000 8.375 0.59

Pliers and Snips

ASME B107.18m Fed’l Spec. GGG-W-340b

Wiretwister, Manual, Diagonal Nose, RH Twist

Product For Wire Size, Length, Total Length, Weight,
Number Inches Inches Inches lbs.
68-171 0.020 to 0.060 9.000 10.500 0.85
ASME B107.18m Fed’l Spec. GGG-W-340b

Wiretwister, Automatic, Diagonal Nose, RH Twist

Product For Wire Size, Length, Total Length, Weight,
Number Inches Inches Inches lbs.
68-175 0.020 to 0.060 9.000 10.500 0.85
ASME B107.18m Fed’l Spec. GGG-W-340b

Wiretwister, Automatic, Diagonal Nose, RH Twist

Product For Wire Size, Length, Total Length, Weight,
Number Inches Inches Inches lbs.
68-178 0.020 to 0.060 12.000 12.000 1.20
ASME B107.18m Fed’l Spec. GGG-W-340b

Wiretwister, Deep Reach

Product For Wire Size, Length, Weight,
Number Inches Inches lbs.
68-191 0.020 to 0.041 19.000 0.43

9-18
 9
Wiretwister Pliers, Snips

Wiretwister, Diagonal Nose, Reversible Twist

Product Wire Capacity Weight,
Number Description (In. dia.) lbs.
68-177 6” Reversible Wire Twister Pliers 0.041 0.50
68-179 9” Reversible Wire Twister Pliers 0.060 0.88

Miniature Snips, Cushion Grips

These light duty snips can cut sheet metal or wire up to 0.025"
thick. Spring keeps handles open during use, but they can be
locked closed to protect cutting edges during storage.
Product Length of Cut, Length, Weight,
Number Inches Inches lbs.
68-241 1.250 6.500 0.29

Aviation Snips, Color Coded Vinyl Grips

Compound leverage design makes for easy cutting in a wide range
of materials from very light stainless to heavy 18 gauge steel. Jaws
are drop forged steel, carefully heat treated; cutting edges are ser-
Pliers and Snips

rated. Spring-activated latch unlocks jaws automatically when han-

dles are pressed together. Latch cannot close accidentally.
Product Grip Length of Length, Weight,
Number Cuts Color Cut, Inches Inches lbs.
68-251 Left Red 1.375 10.000 1.08
68-253 Right Green 1.375 10.000 1.08
68-255 Straight Yellow 1.375 10.000 1.08
ASME B107.16 Fed’l Spec. GGG-S-291f

Offset Aviation Snips, Color Coded Vinyl Grips

All of the features of our straight pattern Aviation Snips, plus the
considerable advantage of jaws offset below the grips. The offset
design makes cutting sheet metal easier and more comfortable,
and provides greater safety as hand stays above the work and well
away from any sharp or jagged edges.
Product Grip Length of Length, Weight,
Number Cuts Color Cut, Inches Inches lbs.
68-261 Left & Straight Red 1.250 10.000 1.22
68-263 Right & Straight Green 1.250 10.000 1.22
ASME B107.16 Fed’l Spec. GGG-S-291f

Straight Cutting Snips, Cushion Grips

Designed for cutting in straight lines only, including inside and out-
side corners.
Product Length of Cut, Length, Weight,
Number Inches Inches lbs.
68-271 2.000 7.000 0.39
68-273 2.250 10.000 0.82
68-275 3.000 12.750 1.45
68-278 2.500 16.500 3.63
ASME B107.16 Fed’l Spec. GGG-S-291f

Always wear eye protection when near tools in use.

9-19
 PUNCHES, CHISELS, PRY BARS AND HAMMERS 10
Punches and Chisels
SAFETY Hammers
Soft brass head is non-sparking
and non-marring Pry Bars

SPEED
Ideal for driving
bushings and gears

SAFETY & STRENGTH

Handle is securely wedged
into hammer head

STRENGTH
Tip is manufactured with reverse
taper, preventing the tool from
binding in the workpiece
STRENGTH
Punches are of unequaled strength,
toughness and durability

SAFETY
Strike all sizes of punches
and chisels while protecting
against hand injury

STRENGTH
Forged using domestically produced steel
and components, insuring unequalled strength,
toughness and durability
SAFETY
Tri-oval handle conforms to the hand,
increasing comfort and reducing operator fatigue
 10
Punch and Chisel Sets

Set 70-568
27 Pc. Punch and Chisel Set
Approximate Weight, 9.86 lbs.
Punches Holder Chisels
Product Point Product Product Width
Number Diameter (in.) Number Number of Cut (in.)
70-103 3/32 70-000 70-301 1/4
70-105 1/8 70-303 5/16
70-107 5/32 Center Punches 70-305 3/8
70-109 3/16 70-309 1/2
70-131 1/4 Product Stock 70-311 5/8
Punches, Chisels, Pr y Bars and Hammers

70-155 3/32 Number Size (in.) 70-313 3/4

70-157 1/8 70-235 3/8 70-315 7/8
70-161 3/16 70-239 1/2 70-317 1
70-165 1/4 70-255 3/8 70-319 1-1/8
70-193 3/16
70-197 1/4 Vinyl Roll
70-129 7/32
70-163 7/32 29-403
70-189 1/8

Set 70-567
19 Pc. Punch and Chisel Set
Approximate Weight, 9.11 lbs.
Punches Chisels Holder
Product Point Product Width Product
Number Diameter (in.) Number of Cut (in.) Number
70-103 3/32 70-309 1/2 70-000
70-105 1/8 70-311 5/8
70-109 3/16 70-313 3/4
70-131 1/4 70-315 7/8 Vinyl Roll
70-155 3/32 70-317 1 29-402
70-157 1/8
70-161 3/16
70-165 1/4
70-193 3/16
70-197 1/4
70-199 5/16
70-201 3/8
70-239 1/2

Set 70-565
12 Pc. Punch and Chisel Set
Approximate Weight, 1.64 lbs.
Punches Chisels
Product Point Product Width
Number Diameter (in.) Number of Cut (in.) Vinyl Roll
70-103 3/32 70-303 5/16 29-404
70-105 1/8 70-307 7/16
70-109 3/16 70-309 1/2
70-153 1/16 70-393 7/32
70-157 1/8 70-421 3/16
70-161 3/16
70-235 3/8

10-1
Always wear eye protection when near tools in use.
 10
Cold Chisel Sets

Set 70-560
5 Pc. Tool Steel Cold Chisel Set
Approximate Weight, 2.62 lbs.
Product Width Product Width
Number of Cut (in.) Number of Cut (in.)
70-325 3/8 70-333 3/4
70-329 1/2 70-335 7/8
70-331 5/8

Vinyl Roll

Punches, Chisels, Pr y Bars and Hammers

29-407

Set 70-563
10 Pc. Cold Chisel Set
Approximate Weight, 5.55 lbs.
Product Width Product Width
Number of Cut (in.) Number of Cut (in.)
70-301 1/4 70-311 5/8
70-303 5/16 70-313 3/4
70-305 3/8 70-315 7/8
70-307 7/16 70-317 1
70-309 1/2 70-319 1-1/8

Vinyl Roll
29-405

Set 70-562
7 Pc. Cold Chisel Set
Approximate Weight, 2.80 lbs.
Product Width Product Width
Number of Cut (in.) Number of Cut (in.)
70-303 5/16 70-311 5/8
70-305 3/8 70-313 3/4
70-307 7/16 70-315 7/8
70-309 1/2

Vinyl Roll
29-406

Set 70-564
5 Pc. Cold Chisel Set
Approximate Weight, 1.19 lbs.
Product Width Product Width
Number of Cut (in.) Number of Cut (in.)
70-303 5/16 70-309 1/2
70-305 3/8 70-311 5/8
70-307 7/16

Vinyl Roll
29-407

10-2
 10
Punch Sets

Set 70-550
19 Pc. Punch Set
Approximate Weight, 5.28 lbs.
Punches
Product Point Product Point
Number Diameter (in.) Number Diameter (in.)
70-103 3/32 70-161 3/16
70-105 1/8 70-165 1/4
70-107 5/32 70-167 5/16
70-109 3/16 70-133 5/16
70-131 1/4 70-189 1/8
Punches, Chisels, Pr y Bars and Hammers

70-155 3/32 70-193 3/16

70-157 1/8 70-197 1/4
70-159 5/32
Holder
Center Punches Product
Product Stock Number
Number Size (in.) 70-000
70-235 3/8
70-239 1/2 Vinyl Roll
70-255 3/8 29-401

Set 70-552
10 Pc. Tool Steel Pin Punch Set
Approximate Weight, 2.07 lbs.
Product Point Product Point
Number Diameter (in.) Number Diameter (in.)
70-110 1/16 70-120 7/32
70-112 3/32 70-122 1/4
70-114 1/8 70-124 9/32
70-116 5/32 70-126 5/16
70-118 3/16 70-128 3/8

Vinyl Roll
29-405

Set 70-553
7 Pc. Tool Steel Pin Punch Set
Approximate Weight, 1.12 lbs.
Product Point Product Point
Number Diameter (in.) Number Diameter (in.)
70-110 1/16 70-118 3/16
70-112 3/32 70-120 7/32
70-114 1/8 70-122 1/4
70-116 5/32

Vinyl Roll
29-406

10-3
Always wear eye protection when near tools in use.
 10
Punch Sets

Set 70-556
5 Pc. Tool Steel Long Pin Punch Set
Approximate Weight, 1.77 lbs.
Product Point Product Point
Number Diameter (in.) Number Diameter (in.)
70-042 5/32 70-045 1/4
70-043 3/16 70-047 5/16
70-044 7/32

Vinyl Roll

Punches, Chisels, Pr y Bars and Hammers

29-407

Set 70-554
7 Pc. Pin Punch Set
Approximate Weight, 1.11 lbs.
Product Point Product Point
Number Diameter (in.) Number Diameter (in.)
70-101 1/16 70-109 3/16
70-103 3/32 70-129 7/32
70-105 1/8 70-131 1/4
70-107 5/32

Vinyl Roll
29-406

Set 70-557
7 Pc. Roll Pin Punch Set
Approximate Weight, 0.66 lbs.
Product Point Product Point
Number Diameter (in.) Number Diameter (in.)
70-260 1/16 70-268 3/16
70-262 3/32 70-270 7/32
70-264 1/8 70-272 1/4
70-266 5/32

Vinyl Roll
29-406

Set 70-559
5 Pc. Drift Punch Set
Approximate Weight, 2.73 lbs.
Product Point Product Point
Number Diameter (in.) Number Diameter (in.)
70-189 1/8 70-197 1/4
70-193 3/16 70-199 5/16
70-195 7/32

Vinyl Roll
29-407

10-4
 10
Cold Chisels

Punch and Chisel Holder

Holds punches and chisels up to 1-1/16" hex stock; SAFETY:
Protects against hand injury. Tri-oval shaped handle conforms to the
hand increasing comfort, reducing operator fatigue. SAFETY: Safety
Warning is prominently visible. "V" shaped head effectively traps the
punch or chisel securely reducing risk of injury.
Length Length
Product Contracted, Expanded, Weight,
Number Inches Inches lbs.
70-000 7.500 8.750 0.72
Punches, Chisels, Pr y Bars and Hammers

Tool Steel Cold Chisels

Product Width of Cut, Stock Size, Length, Weight,
Number Inches Inches Inches lbs.
70-325 3/8 5/16 5.500 0.13
70-329 1/2 7/16 6.000 0.26
70-331 5/8 1/2 6.500 0.37
70-333 3/4 5/8 7.000 0.60
70-335 7/8 3/4 7.500 0.90
70-337 1 7/8 8.000 1.25
ASME B209.1 Fed’l Spec. GGG-C-313c

Cold Chisels
Product Width of Cut, Stock Size, Length, Weight,
Number Inches Inches Inches lbs.
70-301 1/4 1/4 4.750 0.08
70-303 5/16 5/16 5.000 0.12
70-305 3/8 5/16 5.250 0.13
70-307 7/16 3/8 5.500 0.16
70-309 1/2 3/8 6.000 0.19
70-311 5/8 1/2 6.500 0.33
70-313 3/4 5/8 7.000 0.60
70-315 7/8 3/4 7.500 0.91
70-317 1 7/8 8.000 1.33
70-319 1-1/8 7/8 8.000 1.39

Extra Long Cold Chisels

Product Width of Cut, Stock Size, Length, Weight,
Number Inches Inches Inches lbs.
70-347 5/8 1/2 12.000 0.68
70-353 3/4 5/8 12.000 1.05
70-357 3/4 5/8 18.000 1.42
70-361 7/8 3/4 12.000 1.54
70-367 1 7/8 12.000 2.08
70-369 1 7/8 18.000 3.01

10-5 Always wear eye protection when near tools in use.

 10
Specialty Chisels

Rivet Buster
Product Stock Size, Length, Weight,
Number Inches Inches lbs.
70-481 5/8 12.000 1.08

Cape Chisels

Punches, Chisels, Pr y Bars and Hammers

Product Width of Cut, Stock Size, Length, Weight,
Number Inches Inches Inches lbs.
70-391 3/16 1/4 5.000 0.10
70-393 7/32 5/16 5.000 0.10
70-395 1/4 3/8 5.000 0.13
70-397 5/16 3/8 5.750 0.19
70-399 3/8 1/2 6.000 0.27

Round Nose Chisels

Product Width of Cut, Stock Size, Length, Weight,
Number Inches Inches Inches lbs.
70-447 3/16 1/4 5.000 0.09
70-449 1/4 3/8 6.000 0.18
70-451 5/16 3/8 6.000 0.31
70-453 3/8 1/2 6.500 0.37

Diamond Point Chisels

Product Width of Cut, Stock Size, Length, Weight,
Number Inches Inches Inches lbs.
70-419 5/32 5/16 5.000 0.06
70-421 3/16 3/8 5.000 0.15
70-423 1/4 3/8 6.000 0.18
70-425 5/16 1/2 6.000 0.40
70-427 3/8 5/8 6.500 0.47

SAFETY NOTICE
Punches and chisels can be made to chip when struck by or
against a hard surface, resulting not only in damage to the tool,
but possibly an eye or other bodily injur y. Always wear safety
goggles when near a punch or chisel in use. Never use a punch
or chisel with a mushroomed head.

10-6
 10
Pin Punches

Tool Steel Pin Punches

Product Point Dia., Stock Size, Length, Weight,
Number Inches Inches Inches lbs.
70-110 1/16 1/4 4.000 0.05
70-112 3/32 5/16 4.500 0.09
70-114 1/8 5/16 4.750 0.09
70-116 5/32 5/16 5.000 0.10
70-118 3/16 3/8 5.250 0.14
70-120 7/32 3/8 5.500 0.15
70-122 1/4 3/8 5.750 0.17
70-124 9/32 3/8 5.750 0.17
70-126 5/16 7/16 6.000 0.24
Punches, Chisels, Pr y Bars and Hammers

70-128 3/8 1/2 6.000 0.35

ASME B107.48m Fed’l Spec. GGG-P-831F

Tool Steel Long Pin Punches

Product Point Dia., Stock Size, Length, Weight,
Number Inches Inches Inches lbs.
70-041 1/8 5/16 8.000 0.12
70-042 5/32 5/16 8.000 0.13
70-043 3/16 3/8 8.000 0.16
70-044 7/32 3/8 8.000 0.18
70-045 1/4 3/8 8.000 0.19
70-047 5/16 7/16 8.000 0.28
70-049 3/8 1/2 8.000 0.38
ASME B107.48m Fed’l Spec. GGG-P-831F

Brass Pin Punches

Product Point Dia., Stock Size, Length, Weight,
Number Inches Inches Inches lbs.
70-295 1/4 3/8 4.000 0.19
70-296 3/8 1/2 6.000 0.32

Set 70-546
3 Pc. Brass Pin Punch Set
Approximate Weight, 0.83 lbs.
Product Size,
Number Inches Description
70-295 1/4 Brass Pin Punch
70-296 3/8 Brass Pin Punch
70-297 1/4 Brass Solid Punch

10-7
Always wear eye protection when near tools in use.
 10
Pin Punches

Pin Punches
Product Point Dia., Stock Size, Length, Weight,
Number Inches Inches Inches lbs.
70-101 1/16 5/16 4.250 0.07
70-103 3/32 5/16 4.750 0.08
70-105 1/8 5/16 5.000 0.08
70-107 5/32 5/16 5.250 0.08
70-109 3/16 5/16 5.500 0.08
70-129 7/32 3/8 7.000 0.16
70-131 1/4 3/8 7.000 0.18
70-133 5/16 1/2 7.000 0.30

Punches, Chisels, Pr y Bars and Hammers

Roll Pin Punches
Product Point Dia., Stock Size, Length, Weight,
Number Inches Inches Inches lbs.
70-260 1/16 3/16 2.750 0.02
70-262 3/32 3/16 3.500 0.02
70-264 1/8 1/4 4.000 0.04
70-266 5/32 1/4 4.500 0.04
70-268 3/16 3/8 4.500 0.08
70-270 7/32 3/8 5.000 0.08
70-272 1/4 7/16 5.500 0.13
70-274 5/16 7/16 6.000 0.17
70-276 3/8 1/2 6.000 0.21
70-280 1/2 5/8 6.000 0.38

10-8
 10
Specialty Punches

Drift Punches
Product Point Dia., Stock Size, Length, Weight,
Number Inches Inches Inches lbs.
70-187 3/32 3/8 7.500 0.26
70-189 1/8 3/8 8.000 0.29
70-191 5/32 1/2 8.500 0.34
70-193 3/16 1/2 9.000 0.38
70-195 7/32 1/2 9.500 0.45
70-197 1/4 5/8 11.000 0.68
70-199 5/16 5/8 11.000 0.72
70-201 3/8 3/4 11.000 0.76

Brass Drift Punches

Punches, Chisels and Hammers

Product Stock Size, Length, Weight,

Number Inches Inches lbs.
70-294 3/8 6.000 0.22
70-293 1/2 7.000 0.44
70-291 3/4 8.000 1.13

70-545 3 Pc. Brass Drift Punch Set

Approximate Weight, 1.79 lbs.

Long Aligning Punch

Product Point Dia., Stock Size, Length, Weight,
Number Inches Inches Inches lbs.
70-221 5/16 3/4 18.000 0.82

Starting Punches
Product Point Dia., Stock Size, Length, Weight,
Number Inches Inches Inches lbs.
70-153 1/16 5/16 4.500 0.08
70-155 3/32 5/16 4.500 0.09
70-157 1/8 5/16 4.500 0.09
70-159 5/32 3/8 5.000 0.13
70-161 3/16 3/8 5.000 0.13
70-163 7/32 1/2 5.500 0.27
70-165 1/4 1/2 6.000 0.29
70-167 5/16 5/8 7.000 0.32

10-9 Always wear eye protection when near tools in use.

 10
Specialty Punches

Center Punches
Product Stock Size, Length, Weight,
Number Inches Inches lbs.
70-231 1/4 4.250 0.06
70-233 5/16 4.500 0.08
70-235 3/8 5.000 0.13
70-237 7/16 5.500 0.21
70-239 1/2 6.000 0.28
70-241 5/8 7.000 0.42

Prick Punches
Product Stock Size, Length, Weight,
Number Inches Inches lbs.
70-251 1/4 4.250 0.05

Punches, Chisels and Hammers

70-253 5/16 4.500 0.09
70-255 3/8 5.000 0.13
70-257 1/2 6.000 0.29

Brass Taper Punch

Product Stock Size, Length, Weight,
Number Inches Inches lbs.
70-292 1/4 4.000 0.19

Brass Solid Punch

Product Stock Size, Length, Weight,
Number Inches Inches lbs.
70-297 1/4 6.000 0.32

10-10
 10
Pr y Bars

Set 70-579
4 Pc. Pry Bar Set
Approximate Weight, 5.51 lbs.
Product Blade Length, Product Blade Length,
Number Inches Number Inches
70-531 3/8 x 7.000 70-535 1/2 x 18.000
70-533 3/8 x 12.000 70-537 1/2 x 24.000

Set 70-578
Punches, Chisels, Pr y Bars and Hammers

4 Pc. Aligning/Rolling Head Set

Approximate Weight, 7.04 lbs.
Product Stock Size, Product Stock Size,
Number Inches Number Inches
70-503 5/8 70-519 1/2
70-505 3/4 70-521 5/8

Pry Bars
Product Tip Width, Stock Size, Blade Length, OAL, Weight,
Number Inches Inches Inches Inches lbs.
70-531 5/8 3/8 7.000 12.000 0.47
70-533 5/8 3/8 12.000 17.000 0.75
70-535 11/16 1/2 18.000 25.000 1.72
70-537 11/16 1/2 24.000 31.000 2.28
70-539 1 7/8 28.000 36.000 3.69

Aligning Pry Bars

Product Stock Size, Length, Weight,
Number Inches Inches lbs.
70-501 1/2 14.000 0.78
70-503 5/8 16.000 1.45
70-505 3/4 24.000 3.08
70-507 7/8 30.000 4.78
70-509 7/8 46.000 7.33
70-511 1-1/16 54.000 10.45

Rolling Head Pry Bars

Product Stock Size, Length, Weight,
Number Inches Inches lbs.
70-517 3/8 9.000 0.29
70-519 1/2 15.000 0.87
70-521 5/8 18.000 1.59

Polished Rolling Head Pry Bar

Product Stock Size, Length, Weight,
Number Inches Inches lbs.
70-515 5/8 18.000 2.00

10-11
Always wear eye protection when near tools in use.
 10
Ball Pein Hammers

Safety Glasses 69-990

Attractive, modern styling. Black frames with clear sideshields and
clear lenses. These glasses comply with ASME Z87.1 standards.
Approximate Weight, 0.20 lbs.

Ball Pein Hammers, Fiberglass Handle

Hammer heads are drop forged from selected steel and black

Punches, Chisels, Pr y Bars and Hammers

finished. Face, cheeks and peins are highly polished. Hollow core
fiberglass handle provides better balance, absorbs shock better than
solid fiberglass. Comfortable non-slip handle grips.
Product Weight Length, Weight,
Number Class Inches lbs.
69-404 8 oz. 12.500 1.00
69-406 12 oz. 13.000 1.26
69-408 1 Ib. 13.000 1.47
69-410 1-1/2 Ib. 14.500 2.07
69-412 2 Ib. 14.750 2.63
Fed’l Spec. GGG-H-86c

Ball Pein Hammers, Hickory Handle

Hammer heads are drop forged from selected steel and black
finished. Striking face and peins are highly polished. Handles are
made from the finest second growth white hickory. They are flame
treated, clear lacquered and securely wedged into hammer head.
Product Weight Length, Weight,
Number Class Inches lbs.
69-440 2 oz. 10.250 0.26
69-442 4 oz. 10.250 0.43
69-444 8 oz. 12.000 0.81
69-446 12 oz. 12.750 1.13
69-448 1 Ib. 13.750 1.44
69-450 1-1/2 Ib. 15.250 2.12
69-452 2 Ib. 15.750 2.69
69-454 2-1/2 Ib. 16.000 2.99
Fed’l Spec. GGG-H-86c

10-12
 10
Dead Blow Hammers

HOT CAST DEAD BLOW HAMMERS

SAFETY RED
• SAFETY: Safety Warning is prominently visible
SHOT FILLED CANISTER
• Provides dead blow action and absorbs shock, reducing the chance of injury
HOT CAST URETHANE WITH STEEL REINFORCED HANDLE
• Will not spark or mar surfaces
• Resists chipping and splitting
• Reduces noise when striking metal objects
Punches, Chisels, Pr y Bars and Hammers

Dead Blow Ball Pein Hammers

Product Weight Overall Length, Face Dia., Head Length,
Number Class Inches Inches Inches
68-516 16 oz. 12.750 1.000 4.188
68-524 24 oz. 13.000 1.250 4.500
68-532 32 oz. 13.625 1.375 4.812
68-540 40 oz. 16.500 1.375 4.812

Standard Head One-Piece Dead Blow Hammers

Product Weight Overall Length, Face Dia., Head Length,
Number Class Inches Inches Inches
69-530 10 oz. 10.125 1.250 3.125
69-531 18 oz. 11.250 1.750 3.750
69-532 21 oz. 12.750 2.000 4.125
69-533 42 oz. 14.375 2.250 4.625
69-534 52 oz. 15.250 2.750 5.375
Fed’l Spec. GGG-H-33a

Slimline One-Piece Dead Blow Hammers

Product Weight Overall Length, Face Dia., Head Length,
Number Class Inches Inches Inches
69-540 5 oz. 9.375 0.875 2.875
69-541 14 oz. 10.625 1.250 4.187
69-542 18 oz. 12.125 1.500 4.250
69-543 21 oz. 12.125 1.750 5.187
Fed’l Spec. GGG-H-33a

Deep Throat One-Piece Dead Blow Hammer

Product Weight Overall Length, Face Dia., Head Length,
Number Class Inches Inches Inches
69-547 32 oz. 12.875 1.750 8.500
Fed’l Spec. GGG-H-33a

10-13
Always wear eye protection when near tools in use.
 10
Soft Face Hammers

Sledge Head One-Piece Dead Blow Hammers

Product Weight Overall Length, Face Dia., Head Length,
Number Class Inches Inches Inches
69-550 5 lb. 20.000 2.750 7.000
69-551 8 lb. 30.000 2.750 7.000
69-552 10-1/2 lb. 30.000 3.250 8.000
69-554 11-1/2 lb. 36.000 3.250 8.000
Fed’l Spec. GGG-H-33a

Punches, Chisels, Pr y Bars and Hammers

Soft Face Hammers, Fiberglass Handle
Head Handle
Product Weight Diameter, Length, Length, Thread Weight,
Number Class Inches Inches Inches Size lbs.
69-001 5 oz. 1.000 2.000 11.375 1/4-20 0.37
69-003 8 oz. 1.000 2.000 11.375 1/4-20 0.49
69-009 12 oz. 1.500 2.375 13.000 5/16-18 0.47
69-011 1 Ib. 1.500 4.500 13.000 5/16-18 0.88
69-013 1-1/4 lb. 1.500 2.375 13.000 5/16-18 1.06
69-017 1-1/4 Ib. 2.000 2.500 13.000 3/8-16 0.99
69-019 2 Ib. 2.000 2.500 13.000 3/8-16 1.65
69-025 2 lb. 2.500 3.250 15.000 7/16-14 1.76
69-027 4 Ib. 2.500 3.250 13.000 7/16-14 3.62
69-031 3-1/2 Ib. 3.000 3.750 14.000 1/2-13 2.50
69-033 6 Ib. 3.000 3.750 14.000 1/2-13 5.01
Fed’l Spec. GGG-H-33a

Dead-Blow Soft Face Hammers, Fiberglass Handle

Head Handle
Product Weight Diameter, Length, Length, Thread Weight,
Number Class Inches Inches Inches Size lbs.
69-065 1-1/2 lb. 1.500 6.250 12.000 5/16-18 1.42
69-069 2-1/2 Ib. 2.000 8.625 12.000 3/8-16 2.13
Fed’l Spec. GGG-H-33a

10-14
 10
Soft Face Hammers, Hammers

Soft Face Hammer Tips

Product Diameter, Thread Color Weight,
Number Inches Size Hardness Code lbs.
69-141 1.000 1/4-20 Super Soft Gray 0.04
69-142 1.000 1/4-20 Soft Brown 0.04
69-143 1.000 1/4-20 Medium Red 0.04
69-145 1.000 1/4-20 Tough Green 0.05
69-146 1.000 1/4-20 Med. Hard Cream 0.03
69-148 1.000 1/4-20 Hard Black 0.04
69-149 1.000 1/4-20 Extra Hard Yellow 0.04
69-151 1.500 5/16-18 Super Soft Gray 0.09
69-152 1.500 5/16-18 Soft Brown 0.09
Punches, Chisels, Pr y Bars and Hammers

69-153 1.500 5/16-18 Medium Red 0.10

69-155 1.500 5/16-18 Tough Green 0.10
69-156 1.500 5/16-18 Med. Hard Cream 0.09
69-158 1.500 5/16-18 Hard Black 0.11
Soft Face Tips are color coded to indicate hardness. They won’t mar 69-159 1.500 5/16-18 Extra Hard Yellow 0.11
painted or polished surfaces and won’t gash, mushroom or chip. 69-161 2.000 3/8-16 Super Soft Gray 0.21
Vibration and rebound are highly reduced. Tapered tips thread directly 69-162 2.000 3/8-16 Soft Brown 0.20
into hammer head and seat in head well through friction fit. 69-163 2.000 3/8-16 Medium Red 0.20
69-165 2.000 3/8-16 Tough Green 0.21
69-166 2.000 3/8-16 Med. Hard Cream 0.18
Hardness Conversion Guide 69-168 2.000 3/8-16 Hard Black 0.23
69-169 2.000 3/8-16 Extra Hard Yellow 0.23
Super Med. Extra 69-171 2.500 7/16-14 Super Soft Gray 0.34
Soft Soft Medium Tough Hard Hard Hard 69-172 2.500 7/16-14 Soft Brown 0.35
Soft Rubber ■ ■ 69-173 2.500 7/16-14 Medium Red 0.37
Soft Lead ■ 69-175 2.500 7/16-14 Tough Green 0.37
Wood ■ ■ 69-176 2.500 7/16-14 Med. Hard Cream 0.32
Rubber ■ 69-178 2.500 7/16-14 Hard Black 0.39
Rawhide ■ ■ ■ ■ ■ 69-179 2.500 7/16-14 Extra Hard Yellow 0.40
Brass ■ 69-181 3.000 1/2-13 Super Soft Gray 0.59
Hardwood ■ ■ 69-182 3.000 1/2-13 Soft Brown 0.58
Plastic ■ ■ 69-183 3.000 1/2-13 Medium Red 0.59
Lead ■ ■ 69-185 3.000 1/2-13 Tough Green 0.62
Micarta ■ ■ 69-186 3.000 1/2-13 Med. Hard Cream 0.52
Fiber ■ ■ 69-188 3.000 1/2-13 Hard Black 0.65
Copper ■ 69-189 3.000 1/2-13 Extra Hard Yellow 0.66
Fed’l Spec. GGG-H-33a

“Powerdrive” Dead Blow Hammers, Fiberglass Handle

Shot-loaded head delivers up to 30% greater impact while
eliminating rebound. Thermoplastic head material won’t mar work
and will last many times longer than conventional soft face tips,
without mushrooming. Fiberglass handle shafts-made with
continuous parallel strands reinforced with polyester plastic-are
permanently epoxied to head. Special molded grip is immune to
oils and solvents, and provides comfortable, non-slip action, while
helping to absorb shock.
Product Weight Head Dia., Handle Length, Weight,
Number Class Inches Inches lbs.
69-501 1 Ib. 1.875 11.000 1.38
69-503 2 Ib. 2.125 11.750 1.87
69-505 3 Ib. 2.375 12.635 2.61
69-507 4 Ib. 2.625 13.000 3.12
Fed’l Spec. GGG-H-33a

10-15
Always wear eye protection when near tools in use.
 10
Hammers

Rubber Mallet, Fiberglass Handle

Solid, non-flaking rubber head prevents damage. Ideal for any job
requiring a large non-marring striking face. Molded rubber grip.
Head Mallet
Product Weight Diameter, Length, Length, Weight,
Number Class Inches Inches Inches lbs.
69-490 2 lb. 2.438 3.875 15.375 1.91
Fed’l Spec. GGG-H-33a

Punches, Chisels, Pr y Bars and Hammers

Brass Hammers, Fiberglass Handle
Soft brass head is surface protective, non-sparking, non-marring,
absorbs blow and reduces rebound. Striking face is machined flat
for even blow distribution on off-center hits.
Product Weight Face Dia., Handle Length, Weight,
Number Class Inches Inches lbs.
69-513 1-1/2 Ib. 1.063 12.000 1.95
69-515 2-1/2 Ib. 1.500 12.000 2.68
69-517 4 Ib. 1.875 12.000 3.94
Fed’l Spec. GGG-H-33a

Hand Drilling Hammer, Hickory Handle

For use with punches, cold chisels, star drills, brick chisels, etc.
Broad striking faces and bevels are polished; sides are smooth
ground and feature rust resistant black finish. Flame treated,
second growth hickory handle.
Product Weight Face Dia., Handle Length, Weight,
Number Class Inches Inches lbs.
69-605 3 Ib. 1.250 8.500 3.35
Fed’l Spec. GGG-H-86c

Cross Pein Hammers, Hickory Handle

Striking face and ends of pein generously beveled to reduce
likelihood of chipping. Face, bevels and pein are polished; sides
are smooth ground with black, rust resistant finish. Flame treated,
second growth hickory handle is securely wedged to eye.
Product Weight Face Dia., Handle Length, Weight,
Number Class Inches Inches lbs.
69-621 2 Ib. 1.250 14.500 2.38
69-623 2-1/2 lb. 1.344 15.500 3.07
69-625 3 Ib. 1.438 16.000 3.62
Fed’l Spec. GGG-H-86c

10-16
 10
Hammers

Double Face Sledge Hammers, Hickory Handle

Striking faces and bevels are polished; sides are smooth ground
with rust resistant black finish. Flame treated, second growth hickory
handle securely wedged in tapered eye.
Product Weight Face Dia., Handle Length, Weight,
Number Class Inches Inches lbs.
69-643 2-1/2 Ib. 1.375 15.500 2.88
69-645 3 lb. 1.500 16.000 3.45
69-647 4 Ib. 1.750 16.000 4.50
69-649 6 Ib. 2.125 36.000 7.00
69-651 8 Ib. 2.250 36.000 9.00
69-653 10 Ib. 2.500 36.000 11.00
69-655 12 Ib. 2.625 36.000 13.00
ASME B173.3
Punches, Chisels and Hammers

Copper Hammers, Hickory Handle

Soft head reduces risk of marring work. Ideal for driving bushings
and gears. Second growth white hickory handle is securely wedged
into hammer head.
Product Weight Length, Weight,
Number Class Inches lbs.
69-480 1-1/2 lb. 13.438 1.98
69-485 2 lb. 13.500 2.34

Brass Hammers, Hickory Handle

Soft brass head is non-sparking and non-marring. Ideal for driving
bushings and gears.
Product Weight Length, Weight,
Number Class Inches lbs.
81-110 1/2 Ib. 10.500 0.63
81-111 1 Ib. 10.500 1.13
81-112 2 Ib. 13.000 2.32

Curved Claw Hammer, Hickory Handle

Hammer head is drop forged from selected steel and carefully heat
treated. Striking head, sides and claw are highly polished. Curved
claw model has octagon face and neck. All Claw Hammers feature
select, flame-treated hickory handles which are triple wedged into
tapered eye.
Product Weight Length, Weight,
Number Class Inches lbs.
69-308 16 oz. 13.000 1.43
Fed’l Spec. GGG-H-86c

Claw Hammer, Fiberglass Handle

Same hammer head features as on curved claw models. Hollow core
fiberglass handle provides better balance and more effectively
absorbs shock than solid fiberglass handles. Handle is both steel
wedged and epoxy sealed; features black neoprene grip.
Product Weight Length, Weight,
Number Class Inches lbs.
69-350 20 oz. 14.000 1.89
Fed’l Spec. GGG-H-86c

10-17 Always wear eye protection when near tools in use.

 C-CLAMPS AND LIFTING EYES (EYE BOLTS) 11
General Service C-Clamps
Heavy Duty C-Clamps
STRENGTH & SAFETY Square Throat C-Clamps
Manufactured in accordance with the
latest revision of ANSI/ASME B18.15 Square Throat C-Clamps
Deep Throat C-Clamps
High-Visibility Deep Throat C-Clamps
Lifting Eyes (Eye Bolts)

STRENGTH
Threads are roll formed for greater
strength, smoother running, more
clamping force with less effort and
resistance to nicks

STRENGTH
Heavy-walled hub offers greater
support to the forcing screw

STRENGTH
Patented design pad is cold-formed,
STRENGTH completely encircling the ball of the
I-beam design for greater screw, providing permanent
strength, yet lighter weight attachment, as well as a full swivel action

SAFETY
Deep Throat Pattern C-Clamps STRENGTH
available in “Safety Yellow” or Extra large anvil provides
“Safety Orange” for high visibility a greater gripping area for
securing work
 11
C-Clamps

Armstrong C-Clamps
When your requirements call for clamps, specify Armstrong—the most accepted name in
A the business. When you see Armstrong forged into the frame, feel confident—your clamp
has been manufactured from the best materials. Screws and frames are hardened to provide
great strength and durability. You can depend on it.
SPECIAL FEATURES:
A — BALL JOINT SWIVEL PAD
An exclusive with Armstrong, this patented feature assures the most secure system of
B locking pad to screw. Lip of pad is undercut. When ball of screw is inserted into pad and lip
is forced down, a solid steel wall is formed inside the pad cavity. It completely encircles the
ball insuring a permanent attachment but retaining plenty of swivel.
B — HEAVY WALLED HUB
C-Clamps and Lifting Eyes (Eye Bolts)

Offers greater support for screw. Helps to prevent bending as the hub bears much of the
stress. Makes for a longer lasting clamp.
C — ANVIL
Extra large anvil is carefully broached to assure a flat surface and proper alignment with
C screw. Provides greater gripping area for big work, yet permits pin-point clamping of small
or uneven pieces.

Heavy Duty Pattern

The strongest C-Clamp made. Square-head screw has hardened point. Screw does not
include a handle—it must be tightened with a wrench. Extra long hub helps prevent
springing even under great stress.
Product Capacity Inches Depth of Throat from Thread Length Min. Proof Weight,
Number Max. Min. Center of Screw, In. Size of Screw Test, lbs. lbs.
78-000 13/16 0 5/8 3/8-16 2-1/4 2,800 0.38
78-010 1-5/16 0 15/16 7/16-14 2-13/16 5,600 0.74
78-015 1-3/4 0 1-7/16 5/8-11 4-3/16 8,750 1.91
78-020 2-3/8 1/2 1-9/16 3/4-10 4-1/4 12,500 3.28
78-030 3-5/16 5/8 2 7/8-9 5-3/4 16,250 5.83
78-040 4-5/8 1 2-7/16 1-8 7-1/16 20,000 10.10
78-050 5-3/8 1-1/4 2-7/8 1-8 7-3/4 23,800 14.08
78-060 6-5/8 2-1/2 3-1/4 1-1/8-7 8-3/16 27,500 18.92
78-080 8-1/4 2-1/4 3 1-1/4-7 10-5/16 31,250 27.50
78-090 10-3/8 4-1/4 3-1/8 1-1/4-7 10-5/16 35,000 30.59
78-092 12-1/2 6-3/8 3-1/2 1-1/4-7 10-5/16 40,000 37.22
Fed’l Spec. GGG-C-406d

Heavy Duty Pattern, with Full-Length Screw*

Product Capacity Inches Depth of Throat from Thread Length Min. Proof Weight,
Number Max. Min. Center of Screw, In. Size of Screw Test, lbs. lbs.
78-021 2-3/8 0 1-9/16 3/4-10 5 12,500 3.28
78-031 3-5/16 0 2 7/8-9 6-11/16 16,250 5.83
78-041 4-5/8 0 2-7/16 1-8 8-11/16 20,000 10.10
78-051 5-3/8 0 2-7/8 1-8 9-13/16 23,800 14.08
78-061 6-5/8 0 3-1/4 1-1/8-7 11-3/8 27,500 18.92
78-081 8-1/4 0 3 1-1/4-7 13-9/16 31,250 27.50
78-091 10-3/8 0 3-1/8 1-1/4-7 15-9/16 35,000 30.59
78-093 12-1/2 0 3-1/2 1-1/4-7 15-3/8 40,000 37.22
*Product marked with Heavy Duty # Fed’l Spec. GGG-C-406d

11-1 Always wear eye protection when near tools in use.

 11
C-Clamps

General Service Pattern

Designed for use in the many applications which don’t require the throat depth of our
Square or Deep Throat pattern, or the extreme strength of our Heavy Duty Pattern.
Product Capacity Inches Depth of Throat from Thread Length Min. Proof Weight,
Number Max. Min. Center of Screw, In. Size of Screw Test, lbs. lbs.
78-102 2 0 1-3/8 1/2-13 4-7/8 7,500 1.26
78-103 3 0 1-3/4 5/8-11 6-3/8 8,750 2.60
78-104 4 0 2 3/4-10 7-7/8 10,000 4.13
78-106 6 2 2-1/4 3/4-10 7-7/8 11,250 5.90
78-108 8 4 2-1/4 3/4-10 7-7/8 12,500 6.90
78-110 10 6 2-3/8 3/4-10 7-7/8 13,750 8.00
78-112 12 8 2-5/8 7/8-9 10-1/4 15,000 11.61
78-115 15 10 2-3/4 7/8-9 10-1/4 16,250 14.95

C-Clamps and Lifting Eyes (Eye Bolts)

78-118 18 13 2-7/8 7/8-9 10-1/4 17,500 18.21
Fed’l Spec. GGG-C-406d

General Service Pattern, with Full-Length Screw*

Product Capacity Inches Depth of Throat from Thread Length Min. Proof Weight,
Number Max. Min. Center of Screw, In. Size of Screw Test, lbs. lbs.
78-107 6 0 2-1/4 3/4-10 9-5/8 11,250 5.90
78-109 8 0 2-1/4 3/4-10 11-11/16 12,500 6.90
78-111 10 0 2-3/8 3/4-10 13-9/16 13,750 8.00
78-113 12 0 2-5/8 7/8-9 16-1/4 15,000 11.61
78-116 15 0 2-3/4 7/8-9 19-1/4 16,250 14.95
78-119 18 0 2-7/8 7/8-9 22-1/4 17,500 18.21
*Product marked with General Service Pattern # Fed’l Spec. GGG-C-406d

Square Throat Pattern, Black Finish

Designed for those jobs where a super deep throat is required. Square throat clamps offer
up to 89% more throat depth than other patterns, but embody all the strength and durability
inherent in a drop forged C-clamp.
Product Capacity Inches Depth of Throat from ACME Thread Length Min. Proof Weight,
Number Max. Min. Center of Screw, In. Size of Screw Test, lbs. lbs.
78-303 3 0 3-1/2 1/2-8 4-7/8 3,500 2.52
78-304 4 0 4-1/2 3/4-6 7-5/8 4,100 4.49
78-306 6 0 6-1/2 3/4-6 9-7/8 5,400 8.05
78-308 8 0 8-1/2 3/4-6 12-3/8 5,900 13.11
Fed’l Spec. GGG-C-406d

Square Throat Pattern, Zinc Plated

Designed for those jobs where a super deep throat is required. Square throat clamps offer up
to 89% more throat depth than other patterns, but embody all the strength and durability
inherent in a drop forged C-clamp. Features spatter resisting zinc plated forcing screws for
use in welding.
Product Capacity Inches Depth of Throat from ACME Thread Length Min. Proof Weight,
Number Max. Min. Center of Screw, In. Size of Screw Test, lbs. lbs.
78-333 3 0 3-1/2 1/2-8 4-7/8 3,500 2.52
78-334 4 0 4-1/2 3/4-6 7-5/8 4,100 4.49
78-336 6 0 6-1/2 3/4-6 9-7/8 5,400 8.05
78-338 8 0 8-1/2 3/4-6 12-3/8 5,900 13.11
Fed’l Spec. GGG-C-406d

11-2
 11
C-Clamps

Deep Throat Pattern

Our most popular and versatile pattern. Provides all the strength of our Square Throat
Pattern and greater throat depth than our General Service Pattern. Frame is drop forged
Carbon Steel; all other parts are machined from Carbon Steel.

Product Capacity Inches Depth of Throat from ACME Thread Length Min. Proof Weight,
Number Max. Min. Center of Screw, In. Size of Screw Test, lbs. lbs.
78-401 1-1/2 0 1-5/8 3/8-16 3-1/4 1,400 0.37
78-402 2 0 2-5/16 1/2-8 4-3/4 3,300 1.25
78-403 3 0 2-3/4 1/2-8 5-3/4 3,500 2.04
78-404 4 0 3-1/16 3/4-6 7-5/8 4,100 2.96
78-406 6 0 4-1/16 3/4-6 9-7/8 5,400 4.82
C-Clamps and Lifting Eyes (Eye Bolts)

78-408 8 0 5 3/4-6 12-3/8 5,900 6.81

78-410 10 3 5-15-16 3/4-6 12-3/8 6,200 9.86
78-412 12 4 6-3/8 7/8-6 13-1/2 9,300 12.69
Fed’l Spec. GGG-C-406d

Deep Throat Pattern, with Full-Length Screw*

Product Capacity Inches Depth of Throat from ACME Thread Length Min. Proof Weight,
Number Max. Min. Center of Screw, In. Size of Screw Test, lbs. lbs.
78-411 10 0 5-15/16 3/4-6 14-1/2 6,200 9.86
78-413 12 0 6-3/8 7/8-6 16-1/2 9,300 12.69
*Product marked with Deep Throat # Fed’l Spec. GGG-C-406d

Deep Throat Pattern, Zinc Plated

Design and materials are exactly the same as Deep Throat Pattern. However, forcing screw
are zinc plated to resist the adhesion of welding spatter.
Product Capacity Inches Depth of Throat from ACME Thread Length Min. Proof Weight,
Number Max. Min. Center of Screw, In. Size of Screw Test, lbs. lbs.
78-431 1-1/2 0 1-3/8 3/8-16 3-1/4 1,400 0.37
78-432 2 0 2 1/2-8 4-3/4 3,300 1.23
78-433 3 0 2-3/8 1/2-8 5-3/4 3,500 2.11
78-434 4 0 2-3/4 3/4-6 7-5/8 4,100 2.89
78-436 6 0 3-5/8 3/4-6 9-7/8 5,400 4.83
78-438 8 0 4-1/2 3/4-6 12-3/8 5,900 6.98
78-440 10 3 5-3/8 3/4-6 12-3/8 6,200 9.66
78-442 12 4 5-3/4 7/8-6 13-1/2 9,300 12.85
Fed’l Spec. GGG-C-406d

Deep Throat Pattern, Zinc Plated with Full-Length Screw*

Product Capacity Inches Depth of Throat from ACME Thread Length Min. Proof Weight,
Number Max. Min. Center of Screw, In. Size of Screw Test, lbs. lbs.
78-441 10 0 5-3/8 3/4-6 14-1/2 6,200 9.66
78-443 12 0 5-3/4 7/8-6 16-1/2 9,300 12.85
*Product marked with Deep Throat # Fed’l Spec. GGG-C-406d

11-3 Always wear eye protection when near tools in use.

 11
C-Clamps

Deep Throat Pattern, High Visibility Finish, Safety Yellow*

Same in all respects-except for finish-as other Deep Throat C-Clamps. However, High
Visibility Clamp frames are finished in your choice of “Safety Yellow” or “Safety Orange”
high-gloss baked-on enamel. Easy to see; hard to lose or misplace. Screws and handles are
black finish. Furnished with standard screws only.
Product Capacity Inches Depth of Throat from ACME Thread Length Min. Proof Weight,
Number Max. Min. Center of Screw, In. Size of Screw Test, lbs. lbs.
78-601 1-1/2 0 1-5/8 3/8-16 3-1/4 1,400 0.37
78-602 2 0 2-15/16 1/2-8 4-3/4 3,300 1.25
78-603 3 0 2-3/4 1/2-8 5-3/4 3,500 2.04
78-604 4 0 3-13/16 3/4-6 7-5/8 4,100 2.96
78-606 6 0 4-1/16 3/4-6 9-7/8 5,400 4.82
78-608 8 0 5 3/4-6 12-3/8 5,900 6.81

C-Clamps and Lifting Eyes (Eye Bolts)

78-610 10 3 5-15/16 3/4-6 12-3/8 6,200 9.86
78-612 12 4 6-3/8 7/8-6 13-1/2 9,300 12.69
*Product marked with Deep Throat # Fed’l Spec. GGG-C-406d

Deep Throat Pattern, High Visibility Finish, Safety Orange*

Product Capacity Inches Depth of Throat from ACME Thread Length Min. Proof Weight,
Number Max. Min. Center of Screw, In. Size of Screw Test, lbs. lbs.
78-631 1-1/2 0 1-5/8 3/8-16 3-1/4 1,400 0.37
78-632 2 0 2-5/16 1/2-8 4-3/4 3,300 1.25
78-633 3 0 2-3/4 1/2-8 5-3/4 3,500 2.04
78-634 4 0 3-13/16 3/4-6 7-5/8 4,100 2.96
78-636 6 0 4-1/16 3/4-6 9-7/8 5,400 4.82
78-638 8 0 5 3/4-6 12-3/8 5,900 6.81
78-640 10 3 5-15/16 3/4-6 12-3/8 6,200 9.86
78-642 12 4 6-3/8 7/8-6 13-1/2 9,300 12.69
*Product marked with Deep Throat # Fed’l Spec. GGG-C-406d

11-4
 11
Lifting Eyes (Eye Bolts)

Armstrong Lifting Eyes (Eye Bolts)

Armstrong carbon steel Lifting Eyes are manufactured in accordance with the latest revision of
ASME/ASME B18.15. To ensure consistent performance, these uniformly designed, drop
forged Lifting Eyes are quenched and tempered for optimum strength. Armstrong Lifting Eyes
are furnished with Unified National Coarse (U.N.C.) threads. Special threads and lengths
shorter than standard are available on special order.

Plain Pattern
Shank Dimensions, In. Guide for MAX. Working Load*, lbs.
Product Thread Std. Length Eye Diameter, In. Weight,
Number Size Under Eye Inside Outside 0° 30° 45° lbs.
89-001 1/4-20 1 3/4 1-3/16 500 70 NR 0.05
89-002 5/16-18 1-1/8 7/8 1-7/16 800 200 NR 0.08
C-Clamps and Lifting Eyes (Eye Bolts)

89-003 3/8-16 1-1/4 1 1-21/32 1,400 600 300 0.13

89-004 7/16-14 1-3/8 1-3/32 1-27/32 2,000 700 450 0.20
89-005 1/2-13 1-1/2 1-3/16 2-1/16 2,600 850 525 0.31
89-006 9/16-12 1-5/8 1-9/32 2-9/32 3,000 1,125 750 0.41
89-007 5/8-11 1-3/4 1-3/8 2-1/2 4,000 1,400 950 0.59
89-008 3/4-10 2 1-1/2 2-13/16 6,000 2,200 1,600 0.83
89-009 7/8-9 2-1/4 1-11/16 3-1/4 7,200 2,850 2,000 1.36
89-010 1-8 2-1/2 1-13/16 3-9/16 9,500 3,800 2,800 2 09
89-011 1-1/8-7 2-3/4 2 4 11,800 4,700 3,400 2.92
89-012 1-1/4-7 3 2-3/16 4-7/16 15,000 6,000 4,400 3.83
89-014 1-1/2-6 3-1/2 2-1/2 5-3/16 21,700 8,600 6,200 6.44
89-015 1-3/4-5 3-3/4 2-7/8 6-1/16 29,500 11,600 8,200 11.92
89-016 2-4-1/2 4 3-1/4 6-7/8 38,500 15,400 11,200 14.55
ASME B18.15

Shoulder Pattern
Shank Dimensions, In. Guide for MAX. Working Load*, lbs.
Product Thread Std. Length Eye Diameter, In. Weight,
Number Size Under Eye Inside Outside 0° 30° 45° lbs.
89-021 1/4-20 1 3/4 1-3/16 500 75 NR 0.05
89-022 5/16-18 1-1/8 7/8 1-7/16 800 225 NR 0.08
89-023 3/8-16 1-1/4 1 1-21/32 1,400 650 350 0.13
89-024 7/16-14 1-3/8 1-3/32 1-27/32 2,000 1,000 500 0.20
89-025 1/2-13 1-1/2 1-3/16 2-1/16 2,600 1,200 650 0.31
89-026 9/16-12 1-5/8 1-9/32 2-9/32 3,000 1,600 900 0.41
89-027 5/8-11 1-3/4 1-3/8 2-1/2 4,000 2,000 1,200 0.59
89-028 3/4-10 2 1-1/2 2-13/16 6,000 3,200 2,200 0.83
89-029 7/8-9 2-1/4 1-11/16 3-1/4 7,200 3,800 2,500 1.36
89-030 1-8 2-1/2 1-13/16 3-9/16 9,500 5,000 3,600 2.09
89-031 1-1/8-7 2-3/4 2 4 11,800 5,500 4,500 2.92
89-032 1-1/4-7 3 2-3/16 4-7/16 15,000 7,000 5,200 3.83
89-034 1-1/2-6 3-1/2 2-1/2 5-3/16 21,700 10,500 7,200 6.44
89-035 1-3/4-5 3-3/4 2-7/8 6-1/16 29,500 14,000 10,500 11.92
89-036 2-4-1/2 4 3-1/4 6-7/8 38,500 18,000 13,500 14.55
ASME B18.15
NR: NOT RECOMMENDED
*These loads were determined using a very slow, steady pull. Jerking, sudden pulls and/or drops, and fast pulls impart
very high and unpredictable loads to the Lifting Eye(s) which can exceed the MAXIMUM Working Load.

LIFTING EYE SAFETY

The dangers inherent in any lifting operation are obvious. Yet every 3. DO NOT use Lifting Eyes for angular lifts unless ABSOLUTELY
year, accidents occur which could have been avoided by applying necessary. If angular lifts CANNOT be avoided, then ONLY
the simplest, most fundamental safety precautions. Shoulder Pattern Lifting Eyes-which are specifically designed
1. Read and follow all of the suggestions stated in the “Manual of for this application-should be used.
Proper Uses of Forged Lifting Eyes (Eye Bolts),” BEFORE 4. Armstrong Carbon Steel Lifting Eyes must NEVER be welded.
attempting to use Lifting Eyes in any application. A copy is on 5. DO NOT use Carbon Steel Lifting Eyes at temperatures below
page 11-6 and 11-7 of this catalog. 32°F (0°C).
2. ALWAYS stay well clear of the load. 6. NEVER exceed the MAXIMUM Working Load of a Lifting Eye.

11-5 Always wear eye protection when near tools in use.

 11
Proper Uses of Forged Lifting Eyes (Eye Bolts)

How Recommended Static Working Loads

Are Determined
Lifting Eye manufacturers provided recommended static working
loads for their standard lifting eyes. These static working loads are
shown in the manufacturers’ catalogs and have been determined by
multiplying the tensile strength of the lifting eye material, after heat
treating, by the tensile stress area of the threaded lifting eye shank.
The product of this multiplication is the maximum ultimate strength
of the lifting eye. Dividing this figure by a factor of five provides the
recommended static working load for a straight vertical lift. More
complete information may be found in ASTM A 489, Standard Spec.
for Carbon Steel Lifting Eyes.

C-Clamps and Lifting Eyes (Eye Bolts)

Angular Lifts
An angular lift (see figure 1) places additional stresses on a lifting
eye, above that of the load to be hoisted. For this reason, use of
angular lifts should be avoided whenever possible. If, however, the
situation necessitates an angular lift, a properly selected and inserted
lifting eye must be used, and a reduction in the rated capacity must
be applied.

Shoulder Pattern Lifting Eyes (Eye Bolts)

Are Preferable
In theory, plain pattern and shoulder pattern lifting eyes are equally Fig 1
suitable for vertical lifts. But since there is no guarantee that a load
will never be subjected to an angular lift, shoulder pattern lifting eyes Angular lifts of 30˚ (Fig.1) apply additional stresses and
are recommended for use wherever possible. necessitate reduced working loads.
When a shoulder pattern lifting eye is properly seated in the receiving
hole, the shoulder bears against the seat and reduces bending stress
on the shank.

Seating Of Lifting Eyes (Eye Bolts)

BOLT DIA + 10% APPROX.

Shoulder pattern lifting eyes should always be screwed in so as to DIA x 1/4 MIN
firmly seat the shoulder, with at least 90% of the thread engaged. To
facilitate this, the receiving hole should be machine countersunk.
(See figure 2.) If countersinking is impossible, a minimum number of DIA x 1/8 x 45°

washers should be used to build up the surface of the load until the
MIN. DEPTH
FULL THD

shoulder can be firmly seated by hand. Be sure at least 90% of the

threads are engaged in the receiving hole with a minimum thread
engagement of at least 1-1/2 times the thread diameter in steel when
this method is used.

When using a plain pattern lifting eye, be sure the bolt is firmly
seated by hand with at least 90% of the thread engaged in the CHIP CLEAR
TAP DRILL
receiving hole with the full threads close to the eye fully engaged.
Fig 2
Loads should always be applied to lifting eyes in the plane of the
eye, not at some angle to this plane. Therefore, the direction of the Recommendation for proper drilling, tapping and counterboring of
load should be taken into account when seating the lifting eye. the receiving hole.
Before lifting the load, but with the load lines under tension, check
to see if the lifting eyes are properly positioned.

11-6
 11
Proper Uses of Forged Lifting Eyes (Eye Bolts)

Receiving Hole Extreme Heat

In order to obtain the maximum strength from an eye bolt, Lifting eyes should never be welded, used at, or subjected to
considerable care must be given to the receiving hole into which the temperatures above 275˚F (135˚C). Important physical properties
bold will be screwed. (See Figure 3) are likely to be changed by such heating, creating an unsafe bolt.
Tap the correct class fit thread to accommodate the full length of the Lifting eyes showing signs of such heating should be immediately
lifting eye shank. This is important because recommended destroyed.
capacities apply only when a minimum 90% of the threaded shank
is engaged. For shoulder pattern lifting eyes, counterbore the hole
to insure proper seating of the shoulder, as described previously.
Low Temperature Service
Low temperature service poses additional problems. It is mandatory
that all safety precautions be rigidly adhered to.
Check Seating After Applying Angular Lift At temperatures below 300F(-10C), carbon steel, normally used for
C-Clamps and Lifting Eyes (Eye Bolts)

Immediately after applying an angular load to a shoulder pattern standard lifting eyes, is subject to a decrease in shock resistance
lifting eye, check to be sure the shoulder is still firmly engaged. This and ductility at the lower temperatures.
is important, since the initial lift may cause the bolt to back off, away (a) To minus 400F (-400C): Heat treated low carbon alloy steel
from the load. In such cases, the lifting eye should be unloaded and ASTM specification F541, Alloy Steel
the lifting eye properly reseated. Lifting Eyes, should be used as a
guide.
(b) Under minus 400F (-400C) Use austenitic type steel. A reduction
in rated load may occur.
Thread Engagement
The minimum thread engagement should be at least 1-1/2 times the
thread diameter in steel. Refer to ASME/ASME B18.15, Forged
Lifting Eyes (Eye Bolts), for engagements in other materials. Damaged Threads
Lifting eyes with worn, chipped, or otherwise damaged threads
should be immediately destroyed. Such damage weakens the lifting
eye and can cause improper seating.
Undercut Lifting Eyes (Eye Bolts)
Undercutting of lifting eyes to provide clearance in a non-
counterbore/countersunk hole is not recommended.
Inspection
Lifting eyes should be routinely inspected for such conditions as:
Dynamic Loading A. Elongated or bent eye section.
Shock or rapid loading is inherently dangerous. All loads should be B. Elongated or bent shank.
applied in a gradually increasing manner. C. Nicks and gouges.
D. Obvious wear.
E. Worn, corroded and/or distorted threads.
Always Stand Clear F. Cracks found by non-destructive testing.
Never stand, work or crawl under the load. If the load could swing, G. Absence of sufficient identifying markings.
or if the pieces could fly in the event of a drop, allow for this If any of these conditions exist, the lifting eye should be removed
possibility by establishing a safe distance between yourself and the from service and destroyed.
load.
In addition, the receiving hole should be carefully cleaned and
inspected for worn threads or other thread deterioration prior to
each insertion of the lifting eye.
Don’t Overload Any lifting eye should be removed from service and destroyed when
the manufacturer’s identifying marks are no longer readily
Follow carefully the working load recommendations of the identifiable to guarantee proper reference for continued safe usage.
manufacturer of the lifting eye you are using.

How To Destroy
Altering Of Lifting Eyes (Eye Bolts) Lifting eyes that are being replaced should be rendered unusable.
Lifting eyes should never be ground, machined, metal stamped or Crushing or cutting across the eye is recommended.
altered in any way, since such operation is likely to weaken the bolt.
Lifting eyes showing signs of having been so treated should
immediately be destroyed.

11-7 Always wear eye protection when near tools in use.

 GENERAL PURPOSE TOOLS 12
Measuring Tapes

SAFETY Flange Jacks

Cam-activated lock and oversized Inspection and Retrieving Tools
locking slide hold tape firmly in
extended position Screw Extractors
Feeler Gauges
Hacksaws
Knives
Multi-Purpose Tools

STRENGTH
Stainless steel blade protector
reduces blade breakage

SPEED
Self-retracting blade has convenient black stud markings
every 16 inches, and is graduated in 1/32" for first six inches;
1/16" thereafter

ACCESS
Adjustable frame for use
with 10" or 12" blade SAFETY
Tough plastic handle for
comfortable grip and good balance

SAFETY
Up to 35,000 PSI can ACCESS
be applied to blade Blade can be adjusted to cut
at four different angles
 12
Miscellaneous Tools

Auto-Return, Locking Tape

Product Blade Width, Blade Length, Weight,
Number Inches Feet lbs.
68-433 1/2 12.000 0.48

Auto-Return, Locking Tape

The most popular style. Features a cam-activated lock and oversized
locking slide to hold tape firmly in extended position. Special
General Purpose Tools

stainless steel blade protector reduces blade breakage by up to

85%. Case is chrome plated, with a spring steel belt clip. Yellow
blade has convenient black stud markings every 16 inches, and is
graduated in 1/32" for first six inches; 1/16" thereafter.
Product Blade Width, Blade Length, Weight,
Number Inches Feet lbs.
68-445 1 25.000 0.90

Flange Jacks
For separating flanges without disassembly of pipe lines when
gaskets are to be replaced. Flange Jacks exert tremendous pressure
smoothly and evenly, with no shock along the pipe line. Flanges are
separated quickly and held in perfect alignment. Flange jacks must
be used in pairs for even distribution of pressure.
Cap., Standard Raised Face Flanges, Inches Wt.
Product 125 Lb. 150 Lb. 250 Lb. 300 Lb. Per Pair, Screw
Number Cast Iron Steel Cast Iron Steel lbs. Length
73-305 2 - 20 2 - 20 1 - 12 3/4 - 12 13.00 6.750
73-310 16 - 48 18 - 24 12 - 30 12 - 24 45.00 10.500

12-1 Always wear eye protection when near tools in use.

 12
Miscellaneous Tools

Inspection Mirrors
Telescoping, oval shaped mirror. Perfect for inspecting hidden
areas. Mirror swivels to almost any position.
Product Mirror Mirror Size, Length, Weight,
Number Shape Inches Inches lbs.
70-920 Oval 1.000 x 2.000 5 - 17* 0.44
*Has telescoping handle. Minimum and maximum lengths are listed.

Inspection Mirrors
Designed for all types of inspection work where direct sight lines
are obstructed. Each features an all-angle ball joint for greater
versatility.
Product Mirror Mirror Size, Length, Weight,
Number Shape Inches Inches lbs.
70-921 Circular 0.875 7.500 0.08

General Purpose Tools

70-923 Oval 1.000 x 2.000 8.500 0.08
70-925 Circular 2.250 10.000 - 14.000* 0.25
70-927 Circular 1.250 8.000 0.08
70-929 Rectangular 2.125 x 3.500 11.250 - 15.500* 0.32
*Has telescoping handle. Minimum and maximum lengths are listed.

Fed’l Spec. GGG-M-350a

Magnetic Retrieving Tools Chrome Plated, Cushion Grip

Magnetic tips and all-angle ball joints make these tools versatile and
great time-savers. There’s no longer any need to struggle with pliers
or magnetized screwdrivers when small parts fall into machines or
other inaccessible places. 70-933 has telescoping handle. Pulling
power - 2.00 lbs.
Product Length, Weight,
Number Inches lbs.
70-933 16.750 - 26.750 0.40
70-935 8.500 0.08

Flexible Spring Claw

Designed to position or retrieve small objects. Spring-loaded
plunger opens jaws at end of flexible casing. When plunger is
released, jaws grip object with surprising strength.
Product Length, Weight,
Number Inches lbs.
70-943 23.500 0.26
Fed’l Spec. GGG-F-360b

12-2
 12
Miscellaneous Tools

Screw Extractors
Style preferred by industry since straight, tapering flutes grip more securely than spiral
styles, and they won’t bind in the screw or cause it to spread against the hole. Can be used
for either right or left-handed screws, bolts or studs.

For use on Size of Size of Use drill Min depth

Product Screw Pipe small End, Shank, Length, Size, of Hole, Weight,
Number sizes Sizes Inches Inches Inches Inches Inches lbs.
70-950 #12 to 5/16 -- 0.125 0.188 2.313 0.125 0.375 0.02
70-952 5/16 to 3/8 -- 0.172 0.188 2.375 0.188 0.500 0.02
70-954 7/16 to 1/2 1/8 0.203 0.250 2.875 0.234 0.500 0.04
70-956 1/2 to 9/16 1/4 0.297 0.313 3.000 0.313 0.500 0.06
70-958 9/16 to 5/8 3/8 0.344 0.375 3.250 0.375 0.625 0.11
70-960 5/8 to 3/4 -- 0.422 0.438 3.875 0.469 0.688 0.24
70-962 3/4 to 1 1/2 0.500 0.500 4.500 0.563 0.688 0.27
70-964 1 to 1-1/8 1/2 0.594 0.625 4.875 0.656 0.750 0.43
70-966 1-1/8 to 1-3/8 3/4 0.719 0.750 5.375 0.813 0.750 0.71
Fed’l Spec. GGG-E-936b
General Purpose Tools

Set 70-970
Screw Extractor Set
Contents: 5 Screw Extractors in Vinyl Roll 29-418. Approximate
Weight, 0.31 lbs.

Product For Screw Sizes, Product For Screw Sizes,

Number Inches Number Inches
70-950 #12 - 5/16 70-956 1/2 - 9/16
70-952 5/16 - 3/8 70-958 9/16 - 5/8
70-954 7/16 - 1/2

12-3 Always wear eye protection when near tools in use.

 12
Feeler Gauges

Set 70-801
Combination Gauge Set
Total of 22 Flat Blades. 10 Flat Blades, 3" x 1/2", in following
thicknesses: .002, .003, .004, .005, .006, .007, .008, .010, .013, and
.015. 12 Flat Blades, 1-3/4" x 1/4" in following thicknesses: .011,
.012, .013, .014, .015, .016, .017, .018, .019, .020, .022, and .025.
Weight, 0.10 lbs.

Set 70-803
Piston Gauge Set
8 Flat Blades, 9" x 1/2", in following thicknesses: .002, .003, .004,
.005, .006, .008, .010, and .015. Weight, 0.15 lbs.

General Purpose Tools

Set 70-807
Universal O.H.V. Feeler Gauge Set
16 Blades with 45° Offset, 3-5/16" x 1/2", in following thicknesses:
.009, .010, .011, .014, .015, .016, .017, .018, .019, .020, .021, .023,
.024, .025, .026, and .027. Weight, 0.20 lbs.

Set 70-811
Bent Feeler Gauge Set
11 Blades with 45° Offset, 4-3/16" x 1/2", in following thicknesses:
.006, .008, .010, .011, .012, .013, .014, .015, .018, .019, and .020.
Weight, 0.13 lbs.

Set 70-790
Feeler Gauge Set
32 Blades. Feeler gauge includes one brass blade to use with
electronic ignitions. Measures clearances from .0015" to 0.035".
Weight, 0.44 lbs.

12-4
 12
Feeler Gauges

Set 70-815
Master Go-No-Go Gauge Set
22 Step-Ground, Go-No-Go Blades, 3-5/16" x 1/2" in following
thicknesses: .004-.006, .005-.007, .006-.008, .007-.009, .008-.010,
.009-.011, .010-.012, .011-.013, .012-.014, .013-.015, .014-.016, .015-
.017, .016-.018, .017-.019, .018-.020, .019-.021, .020-.022, .021-.023,
.022-.024, .023-.025, .024-.026, and .025-.027. Weight, 0.19 lbs.

Set 70-817
Long Blade Gauge Set
12 Flat Blades, 12" x 1/2", in following thicknesses: .0015, .002,
.003, .004, .005, .006, .008, .010, .012, .014, .015 and .020.
Weight, 0.31 lbs.
General Purpose Tools

Set 70-819
Long Blade Gauge Set
25 Flat Blades, 12" x 1/2", in following thicknesses: .0015, .002, .003,
.004, .005, .006, .007, .008, .009, .010, .011, .012, .013, .014, .015, .016,
.017, .018, .019, .020, .021, .025, .027, .030, and .040. Weight, 0.74 lbs.

Set 70-827
Spark Plug Wire Gauge Set
9 Wires, Bent 90° and 1 Electrode Bending Tool. In following
thicknesses: .020, .025, .028, .030, .032, .034, .035, .038, and .040.
Weight, 0.06 lbs.

12-5 Always wear eye protection when near tools in use.

 12
Hacksaws, Knives

Flat Frame Hacksaw

Made from selected steel and furnished with one carbon steel blade.
Adjustable frame can be used with blades of 10" or 12" long. Can be
adjusted to cut at four different angles. Tough plastic handles are
designed to provide comfortable grip and good balance.
Product Extreme Length, Height, Weight,
Number Inches Inches lbs.
70-865 17.750 3.750 1.75
Fed’l Spec. GGG-F-671

Quick Saw with Blades

Sturdy screwdriver type handle for a secure grip. Knob easily tightens
and loosens around the blade.
Product Length, Weight,
Number Inches lbs.
70-030 12.000 0.75

General Purpose Tools

Quick Saw Handle*
Handle for use with hacksaw blades. Sturdy screwdriver type handle
for a secure grip. Knob easily tightens and loosens around the blade.
Product Length, Weight,
Number Inches lbs.
70-046 6.000 0.50
*Blades not included

Utility Knife
Cast metal case with 4-position blade control. Extra blades are stored
in case. Heavy duty replacement blades fit all standard knives by
most manufacturers.
Product Length, Weight,
Number Inches lbs.
68-310 6.000 0.27
Fed’l Spec. GGG-K-494b

Replacement Blades*
Product Weight,
Number lbs.
68-312 0.04
*Sold in packages of 5 only.

Putty Knife
Soft grip handle with stainless steel blade ground to peak
performance. Soft grip provides comfortable grip.
Product Length, Weight,
Number Inches lbs.
70-976 8.000 0.50

12-6
 12
Knives

5” Lockback Knife
5” Heavy duty lockback with brass bolsters and wood inlay handle.
4” Locking blade is 420 stainless steel sharpened to a razor’s edge.
Product Closed Position, Weight,
Number Overall Length, Inches lbs.
74-551 5.000 0.69

3” Lockback Knife
3” Lockback featuring a 2-1/4” blade with brass bolsters and wood
inlay handle. Stainless steel blade locks open to prevent accidental
General Purpose Tools

closing.
Product Closed Position, Weight,
Number Overall Length, Inches lbs.
74-552 3.000 0.19

12-7 Always wear eye protection when near tools in use.

 12
Knives

Electrician’s Knife
Three-blade electrician spear blade. Combination screwdriver,
insulation cutter and wire stripper, plus stripping pruning blade.
Product Closed Position, Weight,
Number Overall Length, Inches lbs.
74-553 3.750 0.38

Coping Knife
3-1/4” Single coping/sheepfoot serrated blade.

General Purpose Tools

Product Closed Position, Weight,
Number Overall Length, Inches lbs.
74-554 3.500 0.13

Pruning Knife
4-1/2” Pruning knife with large hawk bill blade.
Product Closed Position, Weight,
Number Overall Length, Inches lbs.
74-555 4.500 0.25

12-8
 12
Multi-Purpose Tools, Knives

3” Lockback Knife
3” Stainless steel feather light lockback with a brushed finished 400
grade metal handle.
Product Closed Position, Weight,
Number Overall Length, Inches lbs.
74-558 2.500 0.13

Multi-Purpose Tool
General Purpose Tools

17-function multitool featuring blunt nose pliers, grippers and cutters

with saw, fine and coarse file, serrated rope blade, clip blade can
opener, cap lifter, SAE and metric ruler. Includes large and small
slotted and Phillips bits, and 1/4” adapter to with sockets.
Product Closed Position, Weight,
Number Overall Length, Inches lbs.
74-556 6.500 0.69

Multi-Purpose Minitool
16-function minitool featuring a clip blade, tweezers, nail file,
scissors, ruler, bottle opener, cap lift, slotted and Phillips
screwdriver, and 3 hex head wrench openings.
Product Closed Position, Weight,
Number Overall Length, Inches lbs.
74-557 4.000 0.13

12-9 Always wear eye protection when near tools in use.

 PULLERS AND ACCESSORIES 13
Internal Pullers
STRENGTH External Pullers
Forcing screw is recessed to
avoid distortion when occasionally
Combination Pullers
impacting lightly with a hammer Press Pullers
Reversible Pullers
Cross Arm Pullers
STRENGTH Harmonic Pullers
Threads are roll formed for greater strength,
smoother running, more clamping force, with Bearing Separators
less effort and resistance to nicks Posi-Lock Pullers

SAFETY
T-handle locks jaw opening
precisely where you set it

SAFETY
Cage guides for fast set up,
while preventing jaws from
spreading or slipping off workpiece

ACCESS
Slim, tapered jaws allow for
gripping of object where access
to a confined area is a problem

STRENGTH
Tip is heat-treated
for long life

HOW TO CHOOSE A PULLER SPREAD

It’s important when buying a puller to consider Spread is the distance between the puller’s jaws and must be
three basic specifications: greater than the diameter of the wheel or gear being pulled.
REACH Minimum and maximum spread is noted in each table.
Reach is the distance from the base of the hub to the flats CAPACITY
of the jaws. This must be greater than the distance from Capacity is the amount of force each puller is capable of
the end of the shaft to behind the gear or wheel to be exerting safely without damaging either the puller or the
pulled. Maximum Reach is always specified. gear. The diameter of the forcing screw should equal at least
one half the diameter of the shaft on which it will be used.
 13
Puller Sets

Set 72-498
Multi-purpose Puller Set
This assortment of puller tools gives you a wide range of job versatility. You get a 5 lb. slide
hammer puller, hub puller, two sizes of jaw-type pullers, a bearing pulling attachment, plus a
cross-bar gear and pulley puller, all contained in a handy plastic storage case.
Weight, 44.00 lbs.
Includes:
72-486 Slide Hammer Puller with 5 lb. hammer, 2-way and 3-way heads. Reversible: either
two or three jaws may be used to handle both “inside” and “outside” pulling jobs.
2300-75 Front hub puller for servicing front drive cars.
71-401 2-ton combination 2- or 3-jaw puller. Has 3-3/8" max. reach, 4-3/4" max. spread.
71-403 5-ton combination 2- or 3-jaw puller. Has 5-1/2" max. reach, 7" max. spread.
72-460 Bar-type gear and pulley puller with 5-1/2" long screw. Includes two hex head cap
screws, 3/8"–16 x 3" long. Spread range: 1-1/2" to 4-1/4".
72-452 Bearing pulling attachment for use with No. 1027 and No. 7393 pullers.
Has 2" max spread, 1/8" min. spread.
Pullers and Accessories

Set 72-499
13 Ton Capacity Puller Set
This versatile 13-ton capacity puller set removes gears, bearings, shafts, pinions, bearing outer
races, and other tightly fitted parts. The set includes a push-puller, pullers, bearing pulling
attachments, specialized pullers, and many accessories. You can work on all makes and models
of cars and light trucks.
Weight, 45.00 lbs.
Includes:
72-461 Push-Puller w/ 6-3/4" legs 2291 Steering wheel puller
72-471 15-3/4" legs for 927 (pr.) 72-487 Pilot bearing puller
71-431 2-jaw puller, 2 Ton 72-485 Slide hammer puller
71-435 2-jaw puller, 5 Ton 2289 Pitman arm puller
71-437 2-jaw puller, 7 Ton 72-451 Bearing splitter
72-423 2-jaw puller, 13 Ton 72-452 Bearing splitter
72-460 Gear and pulley puller 72-453 Bearing splitter
2286 Flange-type puller

Set 71-390
Posilock Puller Set
Contents: 3 Pullers and interchangeable accessories.
Approximate weight, 18.26 lbs.
Includes:
3-Arm Posilock Puller Accessories
0 to 5" Spread, 4" Reach, 5-Ton Slide Rod
3-Arm Internal Bearing Puller 2.5 lb Hammer
Set of 3 Long Jaws, 13" ReachSet 71-
9/16" to 4" Spread, 3" Reach

13-1 Always wear eye protection when near tools in use.

 13
Puller Sets

Set 72-497
10-Ton Slide Hammer Puller Set
Ten-way slide hammer puller set.
Weight, 20.65 lbs.
Includes:
72-490 Slide hammer w/5 lb. hammer with 2 and 3 way puller head
2300-71 Rear axle pulling attachment
24544A 3-way cross-head
24545A Adjusting cone
27241A 2-way cross-block
72-492 Puller hook attachment
34698A Pulling jaws (3) for internal or external pulling jobs
72-454 Grip wrench adapter w/single lead (wrench not included)
205399A Dent puller attachment
44148A Internal/external pulling jaws (3), 61/2"
32054A Internal puller jaws (3), 23/8"
2300-75 Front hub puller assembly
309321A Forcing screw
215895A Sleeve

Pullers and Accessories

Set 72-495
Slide Hammer Puller Set
This useful set contains No. 1176 reversible-jaw slide hammer puller, plus an assortment
of special jaws and adapters. You get all the versatility of the No. 1176 (described fully on
page 177), plus attachments for pulling various size pilot bearings, oil seals, bushings,
timing gears, harmonic balancers, and other tightly fitted parts!
Weight, 9.88 lbs.
Includes:
72-485 Reversible-jaw slide hammer puller with 2-1/2 lb. hammer
44195A Medium jaw (3 incl.)
32054A Pilot bearing jaw (3 incl.) 2-Jaw Spread
44148A Long jaw (3 incl.) Inside Outside
72-452 Puller hook. Removes oil seals, bearings, etc. Tool No. Min. Max. Min. Max.
27241A 2-way cross head 44195A 1-1/4" 4-1/2" 3/4" 5"
36578A Cross block. Removes timing gears, harmonic balancers, pulleys, other parts 32054A 3/4" 2-3/8" – –
44148A 2-3/4" 5-1/2" 3/4" 5"
having tapped holes. Uses cap screws up to 3/8" diameter. Spread with 3/8" 34698A 1-1/4" 3-1/2" 1" 5"
dia. cap screws: 1-7/8" – 5-5/8".
3-Jaw Spread
Inside Outside
Tool No. Min. Max. Min. Max.
44195A 1-1/2" 4-3/4" 1" 4-1/2"
32054A 1" 2-3/4" – –
44148A 3-1/4" 6-1/4" 1" 6-1/4"
34698A 1-1/2" 4-1/4" 1-1/2" 4-1/2"

13-2
 13
Puller Sets

Set 72-496
Blind Hole Puller Set
This set provides a complete selection of expanding collets ranging in size from 5/16" to
3/4". Collet is placed through bore of part to be removed, then expanded with actuator pin
so that lips of collet secure a positive grip for pulling. Force is exerted by means of a forcing
screw and bridge assembly or a slide hammer. Individual pieces can be ordered separately.
Weight, 20.51 lbs.
Includes:
24835A Forcing screw Collet 5/8" to 3/4"
24836A Forcing screw nut Collet 3/4" to 7/8"
72-491 2-1/2 lb. hammer Collet 7/8" to 1"
208627A Shank and tee bar ass’y. Collet 1" to 1-1/4"
Collet 5/16" to 3/8" Collet 1-1/4" to 1-1/2"
Collet 3/8" to 7/16" Collet 1-1/2" to 1-3/4"
Collet 7/16" to 1/2" 72-493 Bridge Slide Hammer
Collet 1/2" to 5/8"

Set 72-442
Pullers and Accessories

Cone Puller Set

Components can be assembled to create several versatile puller versions for both internal
and external pulling tasks. The puller head is turned to securely lock the jaws onto the part
being removed. Both a 2-way and 3-way puller head are included, plus three long-reach and
three short-reach puller jaws. Plastic storage box included. Easily removes gears, bearings,
timing gears, harmonic balancers, and other press-fitted parts.
Weight, 5.09 lbs.

Set 72-458
Bearing Splitter Combo Pack
This combo pack contains four of Armstrong's most popular bearing splitters, plus a pulley
pulling attachment. A rugged organizer case is included, enabling you to keep the tools
together for instant use.
Weight, 30.31 lbs.
Includes:
72-451 Bearing splitter. Has 15/16" max. spread and 1/4" min. spread.
72-452 Bearing splitter. Has 2" max. spread and 1/8" min. spread.
72-453 Bearing splitter. Has 4-5/8" max. spread and 1/2" min. spread.
72-456 Bearing splitter. Has 9" max. spread and 1/2" min. spread.
72-457 Pulley pulling attachment with a 5-7/8" max. and 1-3/4" min. spread

13-3 Always wear eye protection when near tools in use.

 13
Standard Pullers

2-Ton Standard Jaw Pullers

Tool MAX. (in.) JAW (in.) Capacity
No. Reach Spread Screw Size Thickness Width Style and Weight, lbs.
71-431 3.250 4.000 3/8–24 x 4-7/8 Upper 3/16 Upper 1/4 2-ton, 2-Jaw; 0.88
Lower 1/8 Lower 1/2 (Reversible Jaws)
71-401 3.250 4.750 3/8–24 x 4-7/8 Upper 3/16 Upper 1/4 2-ton, 2/3-Jaw; 1.31
Lower 1/8 Lower 1/2 (Reversible Jaws)

5-Ton Standard Jaw Pullers

Tool MAX. (in.) JAW (in.) Capacity
No. Reach Spread Screw Size Thickness Width Style and Weight, lbs.
71-435 3.250 6.000 9/16–20 x 6-15/16 Upper 5/16 Upper 3/8 5-Ton, 2-Jaw; 1.75
Lower 1/4 Lower 3/4 (Reversible Jaws

Pullers and Accessories

71-403 3.250 7.000 9/16–20 x 6-15/16 Upper 5/16 Upper 3/8 5-Ton, 2/3-Jaw; 2.75
Lower 1/4 Lower 3/4 (Reversible Jaws)

7-Ton Standard Jaw Pullers

Tool MAX. (in.) JAW (in.) Capacity
No. Reach Spread Screw Size Thickness Width Style and Weight, lbs.
71-437 5.000 9.000 11/16–18 x 9 Upper 5/1 Upper 1 7-Ton, 2-Jaw; 4.85
Lower 11/32 Lower 1 (Reversible Jaws)
71-405 5.000 10.500 11/16–18 x 9 Upper 5/16 Upper 1 7-Ton, 2/3-Jaw; 6.13
Lower 11/32 Lower 1 (Rev. Jaws)
72-422 8.750 9.500 11/1"–18 x 9 11/32 1 7-Ton,
Long 2-Jaw; 5.31
72-432 8.750 11.000 11/16–18 x 9 11/32 1 7-Ton,
Long 2/3-Jaw; 8.04

13-4
 13
Standard Pullers

13-Ton Standard Jaw Pullers

Tool MAX. (in.) JAW (in.) Capacity
No. Reach Spread Screw Size Thickness Width Style and Weight, lbs.
72-423 11.000 12.000 13/16–16 x 12 9/16 1 13-Ton,
2-Jaw; 10.60
72-433 11.000 12.000 13/16–16 x 12 9/16 1 13-Ton,
2/3-Jaw; 31.19
72-424 15.250 15.500 13/16–16 x 12 9/16 1 13-Ton,
Long 2-Jaw; 20.51
72-434 15.250 17.000 13/16–16 x 12 9/1 1 13-Ton,
Long 2/3-Jaw; 18.78

17-1/2”-Ton Standard Jaw Pullers

Tool MAX. (in.) JAW (in.) Capacity
No. Reach Spread Screw Size Thickness Width Style and Weight, lbs.
Pullers and Accessories

72-425 14.500 14.000 1–14 x 13-1/2 13/16 1-9/32 17-1/2-Ton,

2-Jaw; 30.00
72-435 14.500 14.000 1–14 x 13-1/2" 13/16 1-9/32 17-1/2-Ton,
3-Jaw; 33.00
72-426 18.750 16.000 1–14 x 13-1/2" 13/16 1-9/32 17-1/2-Ton,
Long 2-Jaw; 25.02
72-436 18.750 16.000 1–14 x 13-1/2" 13/16 1-9/32 17-1/2-Ton,
Long 3-Jaw; 49.00

25-Ton Standard Jaw Pullers

Tool MAX. (in.) JAW (in.) Capacity
No. Reach Spread Screw Size Thickness Width Style and Weight, lbs.
72-427 15.500 18.000 11/4–12 x 16-5/8 1-1/16 1-1/2 25-Ton,
2-Jaw; 35.44
72-437 15.500 18.000 11/4–12 x 16-5/8 1-1/16 1-1/2 25-Ton,
3-Jaw; 49.46
72-428 22.250 20.000 11/4–12 x 16-5/8 1-1/16 1-1/2 25-Ton,
Long 2-Jaw; 40.96
Reach

Spread

Reach

Jaw thickness Jaw width

13-5 Always wear eye protection when near tools in use.

 13
Posilock, Push-Pullers

3-Arm Posilock Pullers

Posilock Pullers feature self-aligning jaws. Set up is quick, accurate, and easy for one person. Turning
the T-Handle locks the jaws in place so they can’t fall off.
Product Max. Spread, Max. Reach, Screw, Capacity, Weight,
Number Inches Inches Diameter Lbs. Lbs.
POL104 0.500 - 5.000 4.000 9/16 5,000 7.47
POL106 0.500 - 7.000 6.000 5/8 20,000 8.11
POL108 0.750 - 12.000 8.000 3/4 34,000 14.23
POL110 1.000 - 15.000 10.000 3/4 40,000 17.03
POL113 2.500 - 18.000 13.000 1-1/8 60,000 47.38
POL116 3.000 - 25.000 16.000 1-1/4 80,000 68.00
Fed’l Spec. GGG-P-781d

Pullers and Accessories

Push-Pullers
No. 72-461 – 10-Ton Capacity Can be used with No. 72-453 bearing pulling attachment or No. 72-
457 pulley pulling attachment. May also be used with Nos. 72-478, or 72-479 internal pulling
attachments.
No. 72-462 – 171⁄2-Ton Capacity Can be used with Nos. 72-454 and 72-456 bearing pulling
attachments or Nos. 72-459 pulley pulling attachments. May also be used with Nos. 72-478, 72-479,
or 72-480 internal pulling attachment.
No. 72-463 – 30-Ton Capacity Can be used with Nos. 72-455 bearing pulling attachments. Can be
used with No. 72-480 internal pulling attachment.

REACH

SPREAD

13-6
 13
Push, Cone, Specialty Pullers

Set 72-460
Gear and Pulley Puller
Puller with standard 5-1/2" forcing screw, plus special 13" forcing screw. Includes two hex head cap
screws, 3/8" - 16 x 3" long. Special range: 1-1/2" to 4-1/4". Wt., 1.64 lbs.

Cone-type Puller
Reversible jaws permit handling of both internal and external pulling jobs. The 2-way/3-way head
permits assembly of puller to suit the job at hand. Turning the cone on the puller head securely locks
jaws on part to be removed.
2-Jaw Spread (in.) 3-Jaw Spread (in.)
Tool Inside Outside Inside Outside Weight,
Pullers and Accessories

No. Reach Min. Max. Min. Max. Min. Max. Min. Max. lbs.
72-441 2.875 1.500 4.500 0.750 5.000 1.500 4.750 1.000 4.500 2.37

Pulley Pulling Attachments

Attachment clamps down into V-groove to distribute load.
A Tool MAX. MIN. Weight,
No. Spread (in.) Spread (in.) A (in.) B (in.) lbs. Application/Use with puller Numbers
72-457 5.875 1.750 0.625-18.000 6.000 4.26 71-405, 71-437, 72-422, 72-461
B

A= Thread of tapped hole in adapter.

B= Distance between adjusting screws.

A Internal Pulling Attachments

Approved by leading bearing manufacturers, our internal pulling attachments remove bearing cups, oil
seals, bushings, and other parts from blind holes quickly and easily. Each attachment is designed for
use with a corresponding Push-Puller or slide hammer assembly.
Tool JAW (in.) Weight,
No. Spread Spread A (in.) B (in.) lbs. Application
72-478 1.500–5.000 2.125 1.000–14.000 0.625–18.000 4.87 Use with No. 72-461 and 72-462 Push-Pullers,
72-479 1.500–6.000 4.000 1.000–14.000 0.625–18.000 4.87 72-490 and 72-491 slide hammer pullers.
72-480 3.000–9.000 5.875 1.500–1.000 1.000–14.000 13.43 Use with No. 72-463 Push-Puller.
RE
AC
H

13-7 Always wear eye protection when near tools in use.

 13
Specialty Pullers

Bearing Splitters
These versatile accessories feature “knife-like” edges which are easily placed behind the part to secure
a gripping surface, even when clearances are extremely limited. Puller jaws grip attachment’s outer
edge; when used with a Push-Puller, puller legs are threaded into the attachment’s two tapped holes.
Tool MAX. MIN. Weight,
No. Spread (in.) Spread (in.) A (in.) B (in.) lbs. Application/Use with puller Numbers
72-451 0.938 0.250 0.313–18.000 11.063 0.77 72-421, 71-431, 71-401
A
72-452 2.000 0.125 0.375–16.000 2.438 1.61 71-435, 71-434, 71-404, 72-460
72-453 4.625 0.500 0.625–18.000 4.375 5.64 72-422, 71-405, 72-432, 72-461, 72-462
72-454 5.750 0.500 0.625–18.000 6.000 12.56 71-437, 72-424, 72-433, 72-434, 72-461, A
72-462
72-455 8.000 0.625 1.000–17.000 8.000 19.82 72-425, 72-427, 72-467
72-456 9.000 0.500 5/8"–18.000 6.000 12.7 71-437, 72-424, 72-433, 72-434, 72-462 B

Reversible-Jaw Slide Hammer Pullers

Pullers and Accessories

Here are two extremely versatile pullers which will accomplish many pulling jobs involving gears,
bearings, outer races, grease retainers, oil seals, etc. Either two or three puller jaws may be used to
handle “inside” pulling jobs such as bearing cups and outer races, as well as regular “outside” pulling
jobs. In addition to these uses, the basic slide hammer unit can be removed and used independently.
The No. 72-486 slide hammer puller has a 5 lb. hammer, and the No. 72-485 has a 2-1⁄2 lb. hammer.
No. 72-485 – Puller with 2-1/2 lb. hammer, 2-way and 3-way head, 27" long. Wt., 6.36 lbs.
No. 72-486 – Same as 72-485, except has 5 lb. hammer. Wt., 8.84 lbs.
2-Jaw Spread (in.) 3-Jaw Spread (in.)
Inside Outside Inside Outside Overall
Min. Max. Min. Max. Min. Max. Min. Max. Length
1.250 3.500 1.000 4.500 1.500 4.250 1.500 4.500 27.000

Basic Slide Hammer Units

May be used with an internal pulling attachment or with female or male-female threaded adapters

No. 72-490 – Basic slide hammer unit is 24" long with 5 lb. hammer and 5⁄8"–18 threaded end.
Wt., 7.47 lbs.

No. 72-491 – Basic slide hammer unit is 24" long with 2-1⁄2 lb. hammer and 5⁄8"–18 threaded end.
Wt., 4.90 lbs.

Pilot Bearing Pullers

These very versatile pullers are built specially for inside pulling jobs, and particularly for removing
flywheel pilot bearings on automobiles, trucks, and tractors. Also very practical for pulling motor,
generator, and magneto bearings.
I.D. Spread
Tool No. Reach (in.) Min. (in.) Max. (in.) Weight, lbs.
72-487 0.750 0.500 1.500 3.85
72-488 1.000 0.875 2.125 3.85

13-8
 13
Accessories

Shaft Protector Set

Designed to protect shaft centers from distortion when extreme pressures are applied.
No. 72-506 - Shaft protector set. Weight, 1.23 lbs.
Shaft protectors are available separately.
Tool No. A (in.) B (in.) C (in.) D (in.)
72-500 1.500 0.750 0.375 0.438
72-501 1.250 0.750 0.375 0.375
72-504 0.625 0.625 0.250 0.250
72-505 0.625 0.625 0.188 0.188

Locking Plier Adapter

For grip wrenches using single or double lead thread adjusting screw. Adapter threads onto slide
hammer with 5/8"–18 thread. Grip wrench threads onto 7/16"–14 end of adapter for pulling use.
Pullers and Accessories

No. 72-494 – Grip wrench adapter with single lead thread. Wt., 0.52 lbs.

Puller Hook
Used with any slide hammer with 5/8-18 threaded shaft for removing oil seals, bearings, bearing
races, etc. Wt., 0.21 lbs.
No. 72-492 – Puller Hook

Collets with Pins for Blind Hole Pullers

Product Min. Spread, Reach, Weight
Number Inches Inches Lbs.
71-921 0.313 1.750 0.15
71-922 0.375 1.750 0.19
71-923 0.438 2.000 0.23
71-924 0.500 2.000 0.26
71-925 0.625 2.500 0.33
71-926 0.750 2.500 0.40
71-927 0.875 2.500 0.53
71-928 1.000 4.000 1.02
71-929 1.250 4.000 1.53
71-930 1.500 4.000 1.63
Fed’l Spec. GGG-P-781d

13-9 Always wear eye protection when near tools in use.

 WORK HOLDING TOOLS, CUTTING TOOLS AND SHOP ACCESSORIES 14
T-Slot Bolts
Nuts and Washers
CUTTING TOOLS FOR Set-up Wedges
MACHINE SHOP USE Cutting Tools

FRONT

SIDE

Cutting Tools

WORK HOLDING TOOLS

MACHINE SHOP USE

Nut

Washer

T-Slot Bolt SIDE

 14
Work-Holding Tools

T-Slot Bolts, Carbon Steel, Black Finish

Forged T-Slot Bolts are used for setting up work on planers, shapers, milling machines, and
other machine tools equipped with T-slot tables. Will fit T-slot without machining and cannot
turn or break out of table slots. Available in Unified National Coarse, U.N.C. thread only.
Work Holding Tools, Cutting Tools and Shop Accessories

T-Slot Bolts, 3/8" T-Slot Size T-Slot Bolts, 3/4" T-Slot Size
Product Weight, Length Under Product Weight, Length Under
Number lbs. Head, Inches Number lbs. Head, Inches
79-551 0.04 1.000 79-679 0.52 2.500
79-555 0.06 1.500 79-683 0.57 3.000
79-559 0.08 2.000 79-685 0.63 3.500
79-561 0.09 2.500 79-687 0.68 4.000
79-565 0.11 3.000 79-689 0.75 4.500
79-569 0.14 4.000 79-691 0.82 5.000
79-693 0.87 5.500
3/8
79-695 0.95 6.000
79-697 1.04 7.000
3/16 79-699 1.16 8.000
5/8 79-703 1.43 10.000
3/4

T-Slot Bolts, 1/2" T-Slot Size 7/16

Product Weight, Length Under 1-3/16

Number lbs. Head, Inches

79-587 0.15 1.500 T-Slot Bolts 7/8" T-Slot Size,
79-591
79-595
0.16 2.000 3/4" Diameter Bolt
0.18 2.500
79-599 0.21 3.000 Product Weight, Length Under
79-601 0.24 3.500 Number lbs. Head, Inches
79-603 0.26 4.000 79-727 0.89 4.000
79-605 0.29 4.500 79-729 0.96 4.500
79-607 0.31 5.000 79-731 1.01 5.000
79-611 0.36 6.000 79-735 1.14 6.000
1/2
79-739 1.38 8.000
79-743 1.65 10.000
9/32
3/4

7/8
7/8

T-Slot Bolts, 5/8" T-Slot Size

9/16

Product Weight, Length Under 1-1/2

Number lbs. Head, Inches
79-627 0.24 1.500 T-Slot Bolts 1" T-Slot Size,
79-631 0.28 2.000
79-635 0.31 2.500
7/8" Diameter Bolt
79-639 0.35 3.000 Product Weight, Length Under
79-641 0.39 3.500 Number lbs. Head, Inches
79-643 0.45 4.000 79-757 1.09 3.000
79-645 0.48 4.500 79-759 1.27 4.000
79-647 0.53 5.000 79-761 1.44 5.000
79-649 0.56 5.500 79-763 1.59 6.000
79-651 0.61 6.000 79-765 1.78 7.000
79-653 0.71 7.000 79-767 1.96 8.000
79-655 0.77 8.000 79-771 2.28 10.000
79-659 0.95 10.000

1/2
7/8

9/32

7/8
5/8

1-3/4

14-1 Always wear eye protection when near tools in use.

 14
Work-Holding Tools

T-Slot Nuts
For use with threaded studs on machine tools equipped with slotted tables. Forged nuts will
fit T-slots without machining, and duplicate dimensions of T-Slot Bolts. Available in Unified
National Coarse, U.N.C. thread only.

Work Holding Tools, Cutting Tools and Shop Accessories

Product T-Slot Size, U.S. Standard Weight,
Number Inches Thread Pounds
79-825 0.625 1/2" - 13 mm 0.17
79-827 0.750 5/8" - 11 mm 0.28
79-829 0.875 3/4" - 10 mm 0.39
79-831 1.000 7/8" - 9 mm 0.57

Hex Nuts
For use with T-Slot Bolts. Heat treated for added strength. Available in Unified National
Coarse, U.N.C. thread only.
Product Bolt Dia., Across Flats, Thickness, Weight,
Number Inches Inches Inches lbs.
79-841 0.375 0.687 0.500 0.04
79-843 0.500 0.875 0.625 0.08
79-845 0.625 1.062 0.750 0.15
79-847 0.750 1.250 0.875 0.24
79-849 0.875 1.437 1.000 0.35

Washers
For use with T-Slot Bolts, Washers are heavy and extra thick. Heat treated for added strength.
Product Bolt Dia., I.D., O.D., Thickness, Weight,
Number Inches Inches Inches Inches lbs.
79-859 0.375 0.437 0.812 0.187 0.02
79-861 0.500 0.562 1.000 0.187 0.03
79-863 0.625 0.718 1.250 0.250 0.06
79-865 0.750 0.843 1.500 0.250 0.08
79-867 0.875 0.968 1.750 0.250 0.12

Set-Up Wedges
Maximum
Product Length, Width, Thickness, Weight,
Number Inches Inches Inches lbs.
79-493 3.000 1.000 0.250 0.11
79-495 5.000 1.000 0.500 0.31
79-496 6.000 1.250 0.750 0.68

14-2
 14
Cutting Tools

High Speed Steel Ground Tool Bits and Cut-Off Blades

Available in two versatile grades of High Speed Steel, M-2 and
M-34, bits and blades are ground on all sides and ready for use.
Packaged for convenient handling. Each tool is clearly marked with
Work Holding Tools, Cutting Tools and Shop Accessories

size and product number.

Steel Analysis M-2 Tungsten Moly High Speed Steel

Carbon, .84%; Manganese, .25%; Silicon, .30%; Tungsten, 6.40%;
Chromium, 4.15%; Vanadium, 1.90%; Molybdenum, 5.00%.

M-34 Cobalt High Speed Steel

Carbon, .90%; Manganese, .30%; Silicon, .30%; Tungsten, 1.55%;
Chromium, 3.75%; Vanadium, 2.00%; Molybdenum, 8.70%;
Cobalt, 8.00%.

Square Tool Bits, M-2 H.S.S.

Ends Beveled 10°
Product Size, Length, Weight,
Number Inches Inches lbs.
86-001 0.187 2.000 0.02
86-003 0.250 2.500 0.04
86-005 0.312 2.500 0.07
86-007 0.375 3.000 0.12
86-011 0.500 4.000 0.29
86-013 0.625 4.500 0.51
Fed’l Spec. OO-C-581a

Square Tool Bits, M-34 H.S.S.

Ends Beveled 10°
Product Size, Length, Weight,
Number Inches Inches lbs.
86-041 0.187 2.000 0.02
86-043 0.250 2.500 0.04
86-045 0.312 2.500 0.07
86-047 0.375 3.000 0.12
86-051 0.500 4.000 0.29
86-053 0.625 4.500 0.51
86-055 0.750 5.000 0.82
Fed’l Spec. OO-C-581a

Cut-Off Blades, M-2 H.S.S.

For Straight and Right-Hand Tools—Ends Beveled
Product Size, Length, Weight,
Number Inches Inches lbs.
86-257 0.093 x 0.500 4.500 0.05
86-259 0.093 x 0.625 5.000 0.07
86-261 0.125 x 0.750 5.000 0.12
86-263 0.125 x 0.875 6.000 0.16
86-265 0.187 x 1.000 6.500 0.28
Fed’l Spec. OO-C-581a

14-3 Always wear eye protection when near tools in use.

 14
Cutting Tools

Cut-Off Blades, M-34 H.S.S.

For Straight and Right-Hand Tools—Ends Beveled
Product Size, Length, Weight,
Number Inches Inches lbs.

Work Holding Tools, Cutting Tools and Shop Accessories

86-291 0.093 x 0.500 4.500 0.05
86-293 0.093 x 0.625 5.000 0.07
86-295 0.125 x 0.750 5.000 0.12
86-297 0.125 x 0.875 6.000 0.16
86-299 0.187 x 1.00 6.500 0.28
Fed’l Spec. OO-C-581a

High Speed Steel

Unground Tool Bits and Cut-Off Blades
Made from M-2 High Speed Steel and carefully hardened, these tool
bits and blades are ready for finish grinding.

Square Tool Bits For Turning Tools

Product Size, Length, Weight,
Number Inches Inches lbs.
86-391 0.187 2.000 0.02
86-393 0.250 2.500 0.05
86-395 0.312 2.500 0.07
86-397 0.375 3.000 0.12
86-399 0.437 3.500 0.19
86-401 0.500 4.000 0.29
Fed’l Spec. OO-C-581a

Square Tool Bits For Boring Tools

Product Size, Length, Weight,
Number Inches Inches lbs.
86-421 0.187 1.250 0.01
86-423 0.250 1.750 0.03
86-425 0.312 2.250 0.06
86-427 0.375 2.625 0.11
Fed’l Spec. OO-C-581a

Cut-Off Blades For Straight and Right-Hand Tools

Product Size, Length, Weight,
Number Inches Inches lbs.
86-471 0.093 x 0.500 4.500 0.04
86-473 0.093 x 0.625 5.000 0.07
86-475 0.125 x 0.750 5.000 0.12
86-477 0.125 x 0.875 6.000 0.17
86-479 0.187 x 1.000 6.500 0.28
Fed’l Spec. OO-C-581a

14-4
 14
Cutting Tools

High Speed Steel Ground to Form Tool Bits,

Left-Hand Turning Tool
Made from M-2 High Speed Steel and carefully heat treated, these tool
Work Holding Tools, Cutting Tools and Shop Accessories

bits are ground to ten popular, versatile shapes and ready for use.
Product Size, Length, Weight,
Number Inches Inches lbs.
86-531 0.250 2.500 0.04
86-559 0.312 2.500 0.07
86-583 0.375 3.000 0.12

High Speed Steel Ground to Form Tool Bits,

Round Nose Turning Tool
Made from M-2 High Speed Steel and carefully heat treated, these
tool bits are ground to ten popular, versatile shapes and ready for use.
Product Size, Length, Weight,
Number Inches Inches lbs.
86-533 0.250 2.500 0.04
86-561 0.312 2.500 0.07
86-585 0.375 3.000 0.12

High Speed Steel Ground to Form Tool Bits,

Right-Hand Turning Tool
Made from M-2 High Speed Steel and carefully heat treated, these
tool bits are ground to ten popular, versatile shapes and ready for use.
Product Size, Length, Weight,
Number Inches Inches lbs.
86-537 0.250 2.500 0.04
86-563 0.312 2.500 0.07
86-587 0.375 3.000 0.12

High Speed Steel Ground to Form Tool Bits,

Left-Hand Corner Tool
Made from M-2 High Speed Steel and carefully heat treated, these
tool bits are ground to ten popular, versatile shapes and ready for use.
Product Size, Length, Weight,
Number Inches Inches lbs.
86-539 0.250 2.500 0.04
86-565 0.312 2.500 0.07
86-589 0.375 3.000 0.12

14-5 Always wear eye protection when near tools in use.

 14
Cutting Tools

High Speed Steel Ground to Form Tool Bits,

Threading Tool
Made from M-2 High Speed Steel and carefully heat treated, these
tool bits are ground to ten popular, versatile shapes and ready for use.

Work Holding Tools, Cutting Tools and Shop Accessories

Product Size, Length, Weight,
Number Inches Inches lbs.
86-541 0.250 2.500 0.04
86-567 0.312 2.500 0.07
86-591 0.375 3.000 0.12

High Speed Steel Ground to Form Tool Bits,

Right-Hand Corner Tool
Made from M-2 High Speed Steel and carefully heat treated, these
tool bits are ground to ten popular, versatile shapes and ready for use.
Product Size, Length, Weight,
Number Inches Inches lbs.
86-543 0.250 2.500 0.04
86-569 0.312 2.500 0.07
86-593 0.375 3.000 0.12

High Speed Steel Ground to Form Tool Bits,

Left-Hand Side Tool
Made from M-2 High Speed Steel and carefully heat treated, these
tool bits are ground to ten popular, versatile shapes and ready for use.
Product Size, Length, Weight,
Number Inches Inches lbs.
86-545 0.250 2.500 0.04
86-571 0.312 2.500 0.07
86-595 0.375 3.000 0.12

14-6
 14
Cutting Tools

High Speed Steel Ground to Form Tool Bits,

Square Nose Tool
Made from M-2 High Speed Steel and carefully heat treated, these tool
Work Holding Tools, Cutting Tools and Shop Accessories

bits are ground to ten popular, versatile shapes and ready for use.
Product Size, Length, Weight,
Number Inches Inches lbs.
86-547 0.250 2.500 0.04
86-573 0.312 2.500 0.07
86-597 0.375 3.000 0.12

High Speed Steel Ground to Form Tool Bits,

Rlght-Hand Side Tool
Made from M-2 High Speed Steel and carefully heat treated, these tool
bits are ground to ten popular, versatile shapes and ready for use.
Product Slze, Length, Weight,
Number Inches Inches lbs.
86-549 0.250 2.500 0.04
86-575 0.312 2.500 0.07
86-599 0.375 3.000 0.12

High Speed Steel Ground to Form Tool Bits,

Brass Tool
Made from M-2 High Speed Steel and carefully heat treated, these tool
bits are ground to ten popular, versatile shapes and ready for use.
Product Size, Length, Weight,
Number Inches Inches lbs.
86-551 0.250 2.500 0.04
86-577 0.312 2.500 0.07
86-601 0.312 3.000 0.12

14-7 Always wear eye protection when near tools in use.

 14
Cutting Tools

Set 86-605
Ground to Form Tool Bit Set
Contents: One each of all ten 1/4" bits from previous page.
In cardboard box. Approximate weight, 0.41 Ibs.

Work Holding Tools, Cutting Tools and Shop Accessories

Set 86-607
Ground to Form Tool Bit Set
Contents: One each of all ten 5/16" bits from previous page.
In cardboard box. Approximate weight, 0.65 Ibs.

Set 86-608
Ground to Form Tool Bit Set
Contents: One each of all ten 3/8" bits from previous page.
In cardboard box. Approximate Weight, 1.12 lbs.

Armaloy Ground Tool Bits and Cut-Off Blades

Made from cast alloy steel, these bits and blades have a
hardness between that of High Speed Steels and sintered
Carbides. Ideal for either rough or finish cuts on steel,
malleable iron, cast iron, non-ferrous metals, rubber, and
plastics. Bits are furnished ready for grinding to final cutter
shape; blades are bevelled, ground to shape and ready for use.

Steel Analysis:
45-50% Cobalt, 27-32% Chromium, 14-19% Tungsten, 2-4%
Carbon, 2-7% Tantalum, 1-3% Manganese, 2-5% Iron.

Square Armaloy Tool Bits

Product Size, Length, Weight,
Number Inches Inches lbs.
86-651 0.250 2.125 0.04
86-653 0.312 2.500 0.08
86-655 0.312 3.000 0.13
86-659 0.500 4.000 0.31

Armaloy Cut-Off Blades

Product Size, Length, Weight,
Number Inches Inches lbs.
86-681 0.125 x 0.750 6.000 0.13
86-683 0.125 x 0.875 6.000 0.15
86-685 0.187 x 1.000 6.000 0.28

14-8
 14
Cutting Tools

Armide Sintered Carbide, or Gray Red Enamel

Shanks Armide Carbide-Tipped Cutters
Armide is a sintered carbide material with a hardness approaching that of the diamond.
Work Holding Tools, Cutting Tools and Shop Accessories

It easily machines the toughest steels and castings and can be used also for hard
rubber, plastics, and even glass.
Since cutters will hold their edge far longer than even the finest tool steels, they will
machine from ten to 100 times as many pieces before they require regrinding.
Can be used in Armstrong Carbide Tool Holders and Quick Change Tool Holders, as well
as other tool holding systems. Available in two popular grades, as described below.
Grade A7-For light roughing and general finishing of steel. Red enamel shanks.
Grade A5-For heavy roughing of steel. Red enamel shanks.

Style AL, Grade A7—Straight Turning Tools

For Turning, Facing, Boring, Chamfering
Product Size, Shank Dimensions (in) Nose Blank Dimensions (in) Weight,
Number Key A B C Radius (in) T W L lbs.
87-401 4 0.250 0.250 2.000 0.015 0.093 0.187 0.312 0.03
87-402 5 0.312 0.312 2.250 0.015 0.093 0.250 0.500 0.06
87-403 6 0.375 0.375 2.500 0.015 0.093 0.250 0.500 0.09
87-404 7 0.437 0.437 3.000 0.031 0.093 0.250 0.500 0.15
87-405 8 0.500 0.500 3.500 0.031 0.125 0.312 0.625 0.23
Fed’l Spec. OO-C-845

Style AR, Grade A7—Straight Turning Tools

For Turning, Facing, Boring, Chamfering
Product Size, Shank Dimensions (in) Nose Blank Dimensions (in) Weight,
Number Key A B C Radius (in) T W L lbs.
87-421 4 0.250 0.250 2.000 0.015 0.093 0.187 0.312 0.03
87-422 5 0.312 0.312 2.250 0.015 0.093 0.250 0.500 0.06
87-423 6 0.375 0.375 2.500 0.015 0.093 0.250 0.500 0.09
87-424 7 0.437 0.437 3.000 0.015 0.093 0.250 0.500 0.15
87-425 8 0.500 0.500 3.500 0.031 0.125 0.312 0.625 0.23
Fed’l Spec. OO-C-845

Style AL, Grade A5—Straight Turning Tools

For Turning, Facing, Boring, Chamfering
Product Size, Shank Dimensions (in) Nose Blank Dimensions (in) Weight,
Number Key A B C Radius (in) T W L lbs.
87-601 4 0.250 0.250 2.000 0.015 0.093 0.187 0.312 0.03
87-602 5 0.312 0.312 2.250 0.015 0.093 0.250 0.500 0.06
87-603 6 0.375 0.375 2.500 0.015 0.093 0.250 0.500 0.09
87-605 8 0.500 0.500 3.500 0.031 0.125 0.312 0.625 0.23
Fed’l Spec. OO-C-845

Style AR, Grade A5—Straight Turning Tools

For Turning, Facing, Boring, Chamfering
Product Size, Shank Dimensions (in) Nose Blank Dimensions (in) Weight,
Number Key A B C Radius (in) T W L lbs.
87-621 4 0.250 0.250 2.000 0.015 0.093 0.187 0.312 0.03
87-622 5 0.312 0.312 2.250 0.015 0.093 0.250 0.500 0.06
87-623 6 0.375 0.375 2.500 0.015 0.093 0.250 0.500 0.09
87-624 7 0.437 0.437 3.000 0.031 0.093 0.250 0.500 0.15
87-625 8 0.500 0.500 3.500 0.031 0.125 0.312 0.625 0.23
Fed’l Spec. OO-C-845

14-9 Always wear eye protection when near tools in use.

 14
Cutting Tools

Style BL, Grade A7—Lead Angle Turning Tools

For Turning, Light Planing, Facing, Boring, Milling
Product Size, Shank Dimensions (in) Nose Blank Dimensions (in) Weight,
Number Key A B C Radius (in) T W L lbs.

Work Holding Tools, Cutting Tools and Shop Accessories

87-441 4 0.250 0.250 2.000 0.015 0.093 0.187 0.312 0.03
87-442 5 0.312 0.312 2.250 0.015 0.093 0.250 0.500 0.06
87-443 6 0.375 0.375 2.500 0.015 0.093 0.250 0.500 0.09
87-444 7 0.437 0.437 3.000 0.031 0.093 0.250 0.500 0.15
Fed’l Spec. OO-C-845

Style BR, Grade A7—Lead Angle Turning Tools

For Turning, Light Planing, Facing, Boring, Milling
Product Size, Shank Dimensions (in) Nose Blank Dimensions (in) Weight,
Number Key A B C Radius (in) T W L lbs.
87-461 4 0.250 0.250 2.000 0.015 0.093 0.187 0.312 0.03
87-462 5 0.312 0.312 2.250 0.015 0.093 0.187 0.500 0.06
87-463 6 0.375 0.375 2.500 0.015 0.093 0.187 0.500 0.09
87-464 7 0.437 0.437 3.000 0.031 0.093 0.187 0.500 0.15
87-465 8 0.500 0.500 3.500 0.031 0.125 0.312 0.625 0.22
Fed’l Spec. OO-C-845

Style C, Grade A7—Square Nose Tools

For Forming, Grooving, Turning, Chamfering, Facing
Product Size, Shank Dimensions (in) Blank Dimensions (in) Weight,
Number Key A B C T W L lbs.
87-491 4 0.250 0.250 2.000 0.062 0.250 0.312 0.04
87-492 5 0.312 0.312 2.250 0.093 0.312 0.312 0.06
87-493 6 0.375 0.375 2.500 0.093 0.312 0.312 0.10
Fed’l Spec. OO-C-845

Style D, Grade A7—Point Nose, 80° Included Angle

For Light Turning, Undercutting, Boring, Chamfering
Product Size, Shank Dimensions (in) Nose Blank Dimensions (in) Weight,
Number Key A B C Radius (in) T W L lbs.
87-521 4 0.250 0.250 2.000 0.015 0.015 0.240 0.312 0.04
87-522 5 0.312 0.312 2.250 0.015 0.093 0.302 0.375 0.06
87-523 6 0.375 0.375 2.500 0.015 0.093 0.365 0.500 0.10
Fed’l Spec. OO-C-845

14-10
 14
Cutting Tools

Style D, Grade A5—Point Nose, 80° Included Angle

For Light Turning, Undercutting, Boring, Chamfering
Product Size, Shank Dimensions (in) Nose Blank Dimensions (in) Weight,
Number Key A B C Radius (in) T W L lbs.
Work Holding Tools, Cutting Tools and Shop Accessories

87-721 4 0.250 0.250 2.000 0.015 0.062 0.240 0.312 0.04

87-722 5 0.312 0.312 2.250 0.015 0.093 0.302 0.375 0.06
87-723 6 0.375 0.375 2.500 0.015 0.093 0.365 0.500 0.10
87-724 7 0.437 0.437 3.000 0.031 0.093 0.427 0.500 0.15
87-725 8 0.500 0.500 3.500 0.031 0.125 0.490 0.500 0.25
87-727 10 0.625 0.625 4.000 0.031 0.156 0.615 0.625 0.45
Fed’l Spec. OO-C-845

Style E, Grade A7—Neutral 60° Threading Tools

For American Standard Threading
Product Size, Shank Dimensions (in) Blank Dimensions (in) Weight,
Number Key A B C T W L lbs.
87-551 4 0.250 0.250 2.000 0.062 0.240 0.312 0.04
87-552 5 0.312 0.312 2.250 0.093 0.302 0.375 0.06
87-553 6 0.375 0.375 2.500 0.093 0.365 0.500 0.10
Fed’l Spec. OO-C-845

Style E, Grade A5—Neutral 60° Threading Tools

For American Standard Threading
Product Size, Shank Dimensions (in) Blank Dimensions (in) Weight,
Number Key A B C T W L lbs.
87-751 4 0.250 0.250 2.000 0.062 0.240 0.312 0.04
87-752 5 0.312 0.312 2.250 0.093 0.302 0.375 0.06
87-753 6 0.375 0.375 2.500 0.093 0.365 0.500 0.10
87-755 8 0.500 0.500 3.500 0.125 0.490 0.562 0.25
Fed’l Spec. OO-C-845

14-11 Always wear eye protection when near tools in use.

 Work Holding Tools, Cutting Tools and Shop Accessories
14

14-12
NOTES:
 A
Master Set Contents
Set 15-001 1195 Pc. Ultimate Master Set - Tools
10-004 SKT 1/4DR 6PT 1/8 11-122 SKT 3/8DR 12PT 11/16 11-923 EXTEN 3/8DR 6 12-428 SKT 1/2DR 8PT 7/8 13-156 SKT 3/4DR 12PT 1-3/4
10-005 SKT 1/4DR 6PT 5/32 11-124 SKT 3/8DR 12PT 3/4 11-925 EXTEN 3/8DR 8 12-432 SKT 1/2DR 8PT 1 13-158 SKT 3/4DR 12PT 1-13/16
10-006 SKT 1/4DR 6PT 3/16 11-126 SKT 3/8DR 12PT 13/16 11-927 EXTEN 3/8DR 12 12-504 SKT 1/2DR SPARK PLUG 13-160 SKT 3/4DR 12PT 1-7/8
10-007 SKT 1/4DR 6PT 7/32 11-128 SKT 3/8DR 12PT 7/8 11-928 EXTEN 3/8DR 20 12-516 SKT 1/2DR UNV 12PT 1/2 13-164 SKT 3/4DR 12PT 2
10-008 SKT 1/4DR 6PT 1/4 11-130 SKT 3/8DR 12PT 15/16 11-929 EXTEN FLX 3/8DR 7-1/4 12-518 SKT 1/2DR UNV 12PT 9/16 13-168 SKT 3/4DR 12PT 2-1/8
10-009 SKT 1/4DR 6PT 9/32 11-132 SKT 3/8DR 12PT 1 11-931 ADP 3/8DR LCK 2-1/8 12-520 SKT 1/2DR UNV 12PT 5/8 13-170 SKT 3/4DR 12PT 2-3/16
10-010 SKT 1/4DR 6PT 5/16 11-208 SKT 3/8DR 6PT 1/4 DP 11-935 HDL SPD 3/8DR 16-1/2 12-522 SKT 1/2DR UNV 12PT 11/16 13-172 SKT 3/4DR 12PT 2-1/4
10-011 SKT 1/4DR 6PT 11/32 11-210 SKT 3/8DR 6PT 5/16 DP 11-938 HDL T 3/8DR 8 12-524 SKT 1/2DR UNV 12PT 3/4 13-176 SKT 3/4DR 12PT 2-3/8
10-012 SKT 1/4DR 6PT 3/8 11-211 SKT 3/8DR 6PT 11/32 DP 11-943 HDL SPIN 3/8DR 6 12-713 SKT 1/2DR HEX BIT 1/4 13-328 SKT 3/4DR 12PT 7/8 DP
10-014 SKT 1/4DR 6PT 7/16 11-212 SKT 3/8DR 6PT 3/8 DP 11-944 ADP RAT 3/8DR 12-714 SKT 1/2DR HEX BIT 5/16 13-330 SKT 3/4DR 12PT 15/16 DP
10-016 SKT 1/4DR 6PT 1/2 11-214 SKT 3/8DR 6PT 7/16 DP 11-945 RAT SPIN 3/8DR 12-715 SKT 1/2DR HEX BIT 3/8 13-332 SKT 3/4DR 12PT 1 DP
10-018 SKT 1/4DR 6PT 9/16 11-216 SKT 3/8DR 6PT 1/2 DP 11-947 UNV JNT 3/8DR 12-716 SKT 1/2DR HEX BIT 7/16 13-334 SKT 3/4DR 12PT 1-1/16 DP
10-204 SKT 1/4DR 6PT 1/8 DP 11-218 SKT 3/8DR 6PT 9/16 DP 11-951 ADP 3/8DR 3/8FX1/4M 12-717 SKT 1/2DR HEX BIT 1/2 13-336 SKT 3/4DR 12PT 1-1/8 DP
10-205 SKT 1/4DR 6PT 5/32 DP 11-220 SKT 3/8DR 6PT 5/8 DP 11-972 RAT 3/8DR 7-3/8 REPL 11-903 12-718 SKT 1/2DR HEX BIT 9/16 13-340 SKT 3/4DR 12PT 1-1/4 DP
10-206 SKT 1/4DR 6PT 3/16 DP 11-222 SKT 3/8DR 6PT 11/16 DP 11-973 RAT 3/8DR 10-1/2 REPL 11-904 12-719 SKT 1/2DR HEX BIT 5/8 13-342 SKT 3/4DR 12PT 1-5/16 DP
10-207 SKT 1/4DR 6PT 7/32 DP 11-224 SKT 3/8DR 6PT 3/4 DP 11-974 RAT 3/8DR FLX 9-1/2 12-753 SKT 1/2DR HEX BIT1/4 LNG 13-344 SKT 3/4DR 12PT 1-3/8 DP
10-208 SKT 1/4DR 6PT 1/4 DP 11-226 SKT 3/8DR 6PT 13/16 DP 1140 IMPACT DRIVER SET 12-754 SKT 1/2DR HEX BIT 5/16 LNG 13-346 SKT 3/4DR 12PT 1-7/16 DP
10-209 SKT 1/4DR 6PT 9/32 DP 11-228 SKT 3/8DR 6PT 7/8 DP 12-012 SKT 1/2DR 6PT 3/8 12-755 SKT 1/2DR HEX BIT 3/8 LNG 13-348 SKT 3/4DR 12PT 1-1/2 DP
10-210 SKT 1/4DR 6PT 5/16 DP 11-308 SKT 3/8DR 12PT 1/4 DP 12-014 SKT 1/2DR 6PT 7/16 12-757 SKT 1/2DR HEX BIT 1/2 LNG 13-352 SKT 3/4DR 12PT 1-5/8 DP
10-211 SKT 1/4DR 6PT 11/32 DP 11-310 SKT 3/8DR 12PT 5/16 DP 12-016 SKT 1/2DR 6PT 1/2 12-758 SKT 1/2DR HEX BIT 9/16 LNG 13-918 HDL FLX 3/4DR 22
10-212 SKT 1/4DR 6PT 3/8 DP 11-312 SKT 3/8DR 12PT 3/8 DP 12-018 SKT 1/2DR 6PT 9/16 12-759 SKT 1/2DR HEX BIT 5/8 LNG 13-922 EXTEN 3/4DR 5
10-214 SKT 1/4DR 6PT 7/16 DP 11-314 SKT 3/8DR 12PT 7/16 DP 12-020 SKT 1/2DR 6PT 5/8 12-802 SKT 1/2DR SLT BIT 1/4 13-923 EXTEN 3/4DR 8
10-216 SKT 1/4DR 6PT 1/2 DP 11-316 SKT 3/8DR 12PT 1/2 DP 12-022 SKT 1/2DR 6PT 11/16 12-803 SKT 1/2DR SLT BIT 5/16 13-925 EXTEN 3/4DR 16
10-218 SKT 1/4DR 6PT 9/16 DP 11-318 SKT 3/8DR 12PT 9/16 DP 12-024 SKT 1/2DR 6PT 3/4 12-805 SKT 1/2DR SLT BIT 3/8 13-938 HDL T 3/4DR 17-1/2
10-408 SKT 1/4DR 4PT 1/4 11-320 SKT 3/8DR 12PT 5/8 DP 12-026 SKT 1/2DR 6PT 13/16 12-821 SKT 1/2DR PHLP BIT #1 13-947 UNV JNT 3/4DR
10-410 SKT 1/4DR 8PT 5/16 11-322 SKT 3/8DR 12PT 11/16 DP 12-028 SKT 1/2DR 6PT 7/8 12-822 SKT 1/2DR PHLP BIT #2 13-951 ADP 3/4DR 3/4FX1/2M
10-412 SKT 1/4DR 8PT 3/8 11-324 SKT 3/8DR 12PT 3/4 DP 12-030 SKT 1/2DR 6PT 15/16 12-825 SKT 1/2DR PHLP BIT #3 13-972 RAT 3/4DR 19
10-705 SKT 1/4 DR HEX BIT 5/64 11-326 SKT 3/8DR 12PT 13/16 DP 12-032 SKT 1/2DR 6PT 1 12-828 SKT 1/2DR PHLP BIT #4 16-602 HAND BOX PLASTIC 20-3/4 X
10-706 SKT 1/4 DR HEX BIT 3/32 11-328 SKT 3/8DR 12PT 7/8 DP 12-034 SKT 1/2DR 6PT 1-1/16 12-840 WR 1/2DR CRFT FLR NUT 1-1/8 13-1/2
10-707 SKT 1/4 DR HEX BIT 7/64 11-330 SKT 3/8DR 12PT 15/16 DP 12-036 SKT 1/2DR 6PT 1-1/8 12-841 WR 1/2DR CRFT FLR NUT 1-3/16 19-562 SKT IMP 3/8DR UNV 6PT 3/8
Master Set Contents

10-708 SKT 1/4 DR HEX BIT 1/8 11-332 SKT 3/8DR 12PT 1 DP 12-038 SKT 1/2DR 6PT 1-3/16 12-842 WR 1/2DR CRFT FLR NUT 1-1/4 19-564 SKT IMP 3/8DR UNV 6PT 7/16
10-709 SKT 1/4 DR HEX BIT 9/64 11-408 SKT 3/8DR 8PT 1/4 12-040 SKT 1/2DR 6PT 1-1/4 12-843 WR 1/2DR CRFT FLR NUT 1-5/16 19-566 SKT IMP 3/8DR UNV 6PT 1/2
10-710 SKT 1/4 DR HEX BIT 5/32 11-410 SKT 3/8DR 8PT 5/16 12-042 SKT 1/2DR 6PT 1-5/16 12-844 WR 1/2DR CRFT FLR NUT 1-3/8 19-568 SKT IMP 3/8DR UNV 6PT 9/16
10-711 SKT 1/4 DR HEX BIT 3/16 11-412 SKT 3/8DR 8PT 3/8 12-044 SKT 1/2DR 6PT 1-3/8 12-845 WR 1/2DR CRFT FLR NUT 1-7/16 19-570 SKT IMP 3/8DR UNV 6PT 5/8
10-712 SKT 1/4 DR HEX BIT 7/32 11-414 SKT 3/8DR 8PT 7/16 12-046 SKT 1/2DR 6PT 1-7/16 12-846 WR 1/2DR CRFT FLR NUT 1-1/2 19-572 SKT IMP 3/8DR UNV 6PT 11/16
10-713 SKT 1/4 DR HEX BIT 1/4 11-416 SKT 3/8DR 8PT 1/2 12-048 SKT 1/2DR 6PT 1-1/2 12-847 WR 1/2DR CRFT FLR NUT 1-9/16 19-574 SKT IMP 3/8DR UNV 6PT 3/4
10-714 SKT 1/4 DR HEX BIT 5/16 11-512 SKT 3/8DR UNV 12PT 3/8 12-112 SKT 1/2DR 12PT 3/8 12-848 WR 1/2DR CRFT FLR NUT 1-5/8 19-608 SKT IMP 3/8DR 6PT 1/4
10-745 SKT 1/4DR HEX BIT 5/64 LNG 11-514 SKT 3/8DR UNV 12PT 7/16 12-114 SKT 1/2DR 12PT 7/16 12-849 WR 1/2DR CRFT FLR NUT 19-610 SKT IMP 3/8DR 6PT 5/16
10-746 SKT 1/4DR HEX BIT 3/32 LNG 11-516 SKT 3/8DR UNV 12PT 1/2 12-116 SKT 1/2DR 12PT 1/2 1-11/16 19-612 SKT IMP 3/8DR 6PT 3/8
10-747 SKT 1/4DR HEX BIT 7/64 LNG 11-518 SKT 3/8DR UNV 12PT 9/16 12-118 SKT 1/2DR 12PT 9/16 12-850 WR 1/2DR CRFT FLR NUT 1-3/4 19-614 SKT IMP 3/8DR 6PT 7/16
10-748 SKT 1/4DR HEX BIT 1/8 LNG 11-520 SKT 3/8DR UNV 12PT 5/8 12-119 SKT 1/2DR 12PT 19/32 12-851 WR 1/2DR CRFT FLR NUT 19-616 SKT IMP 3/8DR 6PT 1/2
10-749 SKT 1/4DR HEX BIT 9/64 LNG 11-522 SKT 3/8DR UNV 12PT 11/16 12-120 SKT 1/2DR 12PT 5/8 1-13/16 19-618 SKT IMP 3/8DR 6PT 9/16
10-750 SKT 1/4DR HEX BIT 5/32 LNG 11-524 SKT 3/8DR UNV 12PT 3/4 12-122 SKT 1/2DR 12PT 11/16 12-852 WR 1/2DR CRFT FLR NUT 1-7/8 19-620 SKT IMP 3/8DR 6PT 5/8
10-751 SKT 1/4DR HEX BIT 3/16 LNG 11-708 SKT 3/8DR HEX BIT 1/8 12-124 SKT 1/2DR 12PT 3/4 12-853 WR 1/2DR CRFT FLR NUT 19-622 SKT IMP 3/8DR 6PT 11/16
10-752 SKT 1/4DR HEX BIT 7/32 LNG 11-710 SKT 3/8DR HEX BIT 5/32 12-125 SKT 1/2DR 12PT 25/32 1-15/16 19-624 SKT IMP 3/8DR 6PT 3/4
10-753 SKT 1/4DR HEX BIT 1/4 LNG 11-711 SKT 3/8DR HEX BIT 3/16 12-126 SKT 1/2DR 12PT 13/16 12-854 WR 1/2DR CRFT FLR NUT 2 19-708 SKT IMP 3/8DR 6PT DP 1/4
10-754 SKT 1/4DR HEX BIT 5/16 LNG 11-712 SKT 3/8DR HEX BIT 7/32 12-128 SKT 1/2DR 12PT 7/8 12-859 WR 1/2DR CRFT 15/16 19-710 SKT IMP 3/8DR 6PT DP 5/16
10-801 SKT 1/4DR SLT BIT 3/16 11-713 SKT 3/8DR HEX BIT 1/4 12-130 SKT 1/2DR 12PT 15/16 12-860 WR 1/2DR CRFT 1 19-712 SKT IMP 3/8DR 6PT DP 3/8
10-802 SKT 1/4DR SLT BIT 1/4 11-714 SKT 3/8DR HEX BIT 5/16 12-132 SKT 1/2DR 12PT 1 12-861 WR 1/2DR CRFT 1-1/16 19-714 SKT IMP 3/8DR 6PT DP 7/16
10-821 SKT 1/4DR PHLP BIT #1 11-715 SKT 3/8DR HEX BIT 3/8 12-134 SKT 1/2DR 12PT 1-1/16 12-862 WR 1/2DR CRFT 1-1/8 19-716 SKT IMP 3/8DR 6PT DP 1/2
10-822 SKT 1/4DR PHLP BIT #2 11-748 SKT 3/8DR HEX BIT 1/8 LNG 12-136 SKT 1/2DR 12PT 1-1/8 12-863 WR 1/2DR CRFT 1-1/4 19-718 SKT IMP 3/8DR 6PT DP 9/16
10-823 SKT 1/4DR PHLP BIT #3 11-750 SKT 3/8DR HEX BIT 5/32 LNG 12-138 SKT 1/2DR 12PT 1-3/16 12-866 WR 1/2DR CRFT 1-7/16 19-720 SKT IMP 3/8DR 6PT DP 5/8
10-870 SKT 1/4DR TRX BIT T10 11-751 SKT 3/8DR HEX BIT 3/16 LNG 12-140 SKT 1/2DR 12PT 1-1/4 12-867 WR 1/2DR CRFT 1-1/2 19-722 SKT IMP 3/8DR 6PT DP 11/16
10-872 SKT 1/4DR TRX BIT T15 11-752 SKT 3/8DR HEX BIT 7/32 LNG 12-142 SKT 1/2DR 12PT 1-5/16 12-878 SKT 1/2DR TRX BIT T27 19-724 SKT IMP 3/8DR 6PT DP 3/4
10-874 SKT 1/4DR TRX BIT T20 11-753 SKT 3/8DR HEX BIT 1/4 LNG 12-144 SKT 1/2DR 12PT 1-3/8 12-880 SKT 1/2DR TRX BIT T30 19-947 UNV JNT IMP 3/8DR
10-876 SKT 1/4DR TRX BIT T25 11-754 SKT 3/8DR HEX BIT 5/16 LNG 12-146 SKT 1/2DR 12PT 1-7/16 12-882 SKT 1/2DR TRX BIT T40 20-016 SKT IMP 1/2DR 6PT 1/2
10-878 SKT 1/4DR TRX BIT T27 11-755 SKT 3/8DR HEX BIT 3/8 LNG 12-148 SKT 1/2DR 12PT 1-1/2 12-884 SKT 1/2DR TRX BIT T45 20-018 SKT IMP 1/2DR 6PT 9/16
10-880 SKT 1/4DR TRX BIT T30 11-802 SKT 3/8DR SLT BIT 1/4 12-212 SKT 1/2DR 6PT 3/8 DP 12-886 SKT 1/2DR TRX BIT T50 20-020 SKT IMP 1/2DR 6PT 5/8
10-918 HDL FLX 1/4DR 5-3/4 11-803 SKT 3/8DR SLT BIT 5/16 12-214 SKT 1/2DR 6PT 7/16 DP 12-892 SKT 1/2DR DRAG LNK 7/64 20-022 SKT IMP 1/2DR 6PT 11/16
10-921 EXTEN 1/4DR 2 11-805 SKT 3/8DR SLT BIT 3/8 12-216 SKT 1/2DR 6PT 1/2 DP 12-893 SKT 1/2DR DRAG LNK 3/32 20-024 SKT IMP 1/2DR 6PT 3/4
10-922 EXTEN 1/4DR 4 11-821 SKT 3/8DR PHLP BIT #1 12-218 SKT 1/2DR 6PT 9/16 DP 12-915 RAT 1/2DR RH 10-1/2 20-026 SKT IMP 1/2DR 6PT 13/16
10-923 EXTEN 1/4DR 6 11-822 SKT 3/8DR PHLP BIT #2 12-220 SKT 1/2DR 6PT 5/8 DP 12-917 HDL FLX 1/2DR 12 20-028 SKT IMP 1/2DR 6PT 7/8
10-925 EXTEN 1/4DR 14 11-825 SKT 3/8DR PHLP BIT #3 12-222 SKT 1/2DR 6PT 11/16 DP 12-918 HDL FLX 1/2DR 17 20-030 SKT IMP 1/2DR 6PT 15/16
10-929 EXTEN 1/4DR FLX 6 11-828 SKT 3/8DR PHLP BIT #4 12-224 SKT 1/2DR 6PT 3/4 DP 12-921 EXTEN 1/2DR 2-1/2 20-032 SKT IMP 1/2DR 6PT 1
10-931 ADP 1/4DR LCK 1-5/8 11-842 WR 3/8DR CRFT FLR NUT 5/8 12-226 SKT 1/2DR 6PT 13/16 DP 12-923 EXTEN 1/2DR 5 20-034 SKT IMP 1/2DR 6PT 1-1/16
10-935 HDL SPD 1/4DR 15-3/4 11-843 WR 3/8DR CRFT FLR NUT 11/16 12-228 SKT 1/2DR 6PT 7/8 DP 12-924 EXTEN 1/2DR 10 20-036 SKT IMP 1/2DR 6PT 1-1/8
10-938 HDL T 1/4DR 4-1/2 11-844 WR 3/8DR CRFT FLR NUT 3/4 12-230 SKT 1/2DR 6PT 15/16 DP 12-927 EXTEN 1/2DR 20 20-216 SKT IMP 1/2DR 6PT 1/2 DP
10-943 HDL SPIN 1/4DR 6 11-845 WR 3/8DR CRFT FLR NUT 13/16 12-232 SKT 1/2DR 6PT 1 DP 12-935 HDL SPD 1/2DR 19 20-218 SKT IMP 1/2DR 6PT 9/16 DP
10-945 RAT SPIN 1/4DR 11-846 WR 3/8DR CRFT FLR NUT 7/8 12-234 SKT 1/2DR 6PT 1-1/16 DP 12-938 HDL T 1/2DR 11 20-220 SKT IMP 1/2DR 6PT 5/8 DP
10-947 UNV JNT 1/4DR 11-847 WR 3/8DR CRFT FLR NUT 15/16 12-236 SKT 1/2DR 6PT 1-1/8 DP 12-945 RAT SPIN 1/2DR 20-222 SKT IMP 1/2DR 6PT 11/16 DP
10-972 RAT 1/4DR 5-9/32 REPL 10-903 11-848 WR 3/8DR CRFT FLR NUT 1 12-238 SKT 1/2DR 6PT 1-3/16 DP 12-947 UNV JNT 1/2DR 20-224 SKT IMP 1/2DR 6PT 3/4 DP
67-410 10" LOCKING PLIER 11-849 WR 3/8DR CRFT FLR NUT 1-1/16 12-240 SKT 1/2DR 6PT 1-1/4 DP 12-948 STUD REMOV 1/2DR 20-226 SKT IMP 1/2DR 6PT 13/16 DP
67-460 10" LOCKING PLIER 11-850 WR 3/8DR CRFT 3/8 12-316 SKT 1/2DR 12PT 1/2 DP 12-951 ADP 1/2DR 1/2FX3/8M 20-228 SKT IMP 1/2DR 6PT 7/8 DP
11-008 SKT 3/8DR 6PT 1/4 11-851 WR 3/8DR CRFT 7/16 12-318 SKT 1/2DR 12PT 9/16 DP 12-972 RAT 1/2DR 10-1/2 REPL 12-903 20-230 SKT IMP 1/2DR 6PT 15/16 DP
11-010 SKT 3/8DR 6PT 5/16 11-852 WR 3/8DR CRFT 1/2 12-320 SKT 1/2DR 12PT 5/8 DP 12-973 RAT 1/2DR 15 REPL 12-904 20-566 SKT IMP 1/2DR UNV 6PT 1/2
11-011 SKT 3/8DR 6PT 11/32 11-853 WR 3/8DR CRFT 9/16 12-322 SKT 1/2DR 12PT 11/16 DP 12-974 RAT 1/2DR FLX 14-1/4 20-568 SKT IMP 1/2DR UNV 6PT 9/16
11-012 SKT 3/8DR 6PT 3/8 11-854 WR 3/8DR CRFT 5/8 12-324 SKT 1/2DR 12PT 3/4 DP 13-124 SKT 3/4DR 12PT 3/4 20-570 SKT IMP 1/2DR UNV 6PT 5/8
11-014 SKT 3/8DR 6PT 7/16 11-855 WR 3/8DR CRFT 11/16 12-326 SKT 1/2DR 12PT 13/16 DP 13-126 SKT 3/4DR 12PT 13/16 20-572 SKT IMP 1/2DR UNV 6PT 11/16
11-016 SKT 3/8DR 6PT 1/2 11-856 WR 3/8DR CRFT 3/4 12-328 SKT 1/2DR 12PT 7/8 DP 13-128 SKT 3/4DR 12PT 7/8 20-574 SKT IMP 1/2DR UNV 6PT 3/4
11-018 SKT 3/8DR 6PT 9/16 11-857 WR 3/8DR CRFT 13/16 12-330 SKT 1/2DR 12PT 15/16 DP 13-130 SKT 3/4DR 12PT 15/16 20-576 SKT IMP 1/2DR UNV 6PT 13/16
11-020 SKT 3/8DR 6PT 5/8 11-858 WR 3/8DR CRFT 7/8 12-332 SKT 1/2DR 12PT 1 DP 13-132 SKT 3/4DR 12PT 1 20-578 SKT IMP 1/2DR UNV 6PT 7/8
11-022 SKT 3/8DR 6PT 11/16 11-872 SKT 3/8DR TRX BIT T15 12-334 SKT 1/2DR 12PT 1-1/16 DP 13-134 SKT 3/4DR 12PT 1-1/16 20-580 SKT IMP 1/2DR UNV 6PT 15/16
11-024 SKT 3/8DR 6PT 3/4 11-874 SKT 3/8DR TRX BIT T20 12-336 SKT 1/2DR 12PT 1-1/8 DP 13-136 SKT 3/4DR 12PT 1-1/8 20-582 SKT IMP 1/2DR UNV 6PT 1
11-026 SKT 3/8DR 6PT 13/16 11-876 SKT 3/8DR TRX BIT T25 12-340 SKT 1/2DR 12PT 1-1/4 DP 13-138 SKT 3/4DR 12PT 1-3/16 2153 IGNITION FILE
11-028 SKT 3/8DR 6PT 7/8 11-878 SKT 3/8DR TRX BIT T27 12-412 SKT 1/2DR 8PT 3/8 13-140 SKT 3/4DR 12PT 1-1/4 2310 WIRE BRUSH
11-108 SKT 3/8DR 12PT 1/4 11-880 SKT 3/8DR TRX BIT T30 12-414 SKT 1/2DR 8PT 7/16 13-142 SKT 3/4DR 12PT 1-5/16 25-004 WR COMB 6PT SHT 1/8 FP
11-110 SKT 3/8DR 12PT 5/16 11-882 SKT 3/8DR TRX BIT T40 12-416 SKT 1/2DR 8PT 1/2 13-144 SKT 3/4DR 12PT 1-3/8 25-005 WR COMB 6PT SHT 5/32 FP
11-112 SKT 3/8DR 12PT 3/8 11-884 SKT 3/8DR TRX BIT T45 12-418 SKT 1/2DR 8PT 9/16 13-146 SKT 3/4DR 12PT 1-7/16 25-006 WR COMB 6PT SHT 3/16 FP
11-114 SKT 3/8DR 12PT 7/16 11-886 SKT 3/8DR TRX BIT T50 12-420 SKT 1/2DR 8PT 5/8 13-148 SKT 3/4DR 12PT 1-1/2 25-008 WR COMB 6PT SHT 1/4 FP
11-116 SKT 3/8DR 12PT 1/2 11-915 RAT 3/8DR RH 7-1/2 12-422 SKT 1/2DR 8PT 11/16 13-150 SKT 3/4DR 12PT 1-9/16 25-009 WR COMB 6PT SHT 9/32 FP
11-118 SKT 3/8DR 12PT 9/16 11-918 HDL FLX 3/8DR 8-1/2 12-424 SKT 1/2DR 8PT 3/4 13-152 SKT 3/4DR 12PT 1-5/8 25-010 WR COMB 6PT SHT 5/16 FP
11-120 SKT 3/8DR 12PT 5/8 11-922 EXTEN 3/8DR 3 12-426 SKT 1/2DR 8PT 13/16 13-154 SKT 3/4DR 12PT 1-11/16 Continued . . .

A-1
 A
Master Set Contents
Set 15-001 1195 Pc. Ultimate Master Set Cont.
25-011 WR COMB 6PT SHT 11/32 FP 27-511 WR GEARED BOX 12PT 7/16 FP 38-108 SKT 3/8DR 12PT 8MM 39-124 SKT 1/2DR 12PT 24MM 46-711 SKT IMP 3/8DR 6PT 11MM DP
25-012 WR COMB 6PT SHT 3/8 FP 27-512 WR GEARED BOX 12PT 1/2 FP 38-109 SKT 3/8DR 12PT 9MM 39-125 SKT 1/2DR 12PT 25MM 46-712 SKT IMP 3/8DR 6PT 12MM DP
25-108 WR COMB 12PT SHT 1/4 FP 27-513 WR GEARED BOX 12PT 9/16 FP 38-110 SKT 3/8DR 12PT 10MM 39-126 SKT 1/2DR 12PT 26MM 46-713 SKT IMP 3/8DR 6PT 13MM DP
25-110 WR COMB 12PT SHT 5/16 FP 27-514 WR GEARED BOX 12PT 5/8 FP 38-111 SKT 3/8DR 12PT 11MM 39-127 SKT 1/2DR 12PT 27MM 46-714 SKT IMP 3/8DR 6PT 14MM DP
25-112 WR COMB 12PT SHT 3/8 FP 27-515 WR GEARED BOX 12PT 11/16 FP 38-112 SKT 3/8DR 12PT 12MM 39-128 SKT 1/2DR 12PT 28MM 46-715 SKT IMP 3/8DR 6PT 15MM DP
25-114 WR COMB 12PT SHT 7/16 FP 27-516 WR GEARED BOX 12PT 3/4 FP 38-113 SKT 3/8DR 12PT 13MM 39-129 SKT 1/2DR 12PT 29MM 46-716 SKT IMP 3/8DR 6PT 16MM DP
25-116 WR COMB 12PT SHT 1/2 FP 27-812 WR ANG OE 3/8 15&60D FP 38-114 SKT 3/8DR 12PT 14MM 39-130 SKT 1/2DR 12PT 30MM 46-717 SKT IMP 3/8DR 6PT 17MM DP
25-118 WR COMB 12PT SHT 9/16 FP 27-814 WR ANG OE 7/16 15&60D FP 38-115 SKT 3/8DR 12PT 15MM 39-132 SKT 1/2DR 12PT 32MM 47-010 SKT IMP 1/2DR 6PT 10MM
25-120 WR COMB 12PT SHT 5/8 FP 27-816 WR ANG OE 1/2 15&60D FP 38-116 SKT 3/8DR 12PT 16MM 39-136 SKT 1/2DR 12PT 36MM 47-011 SKT IMP 1/2DR 6PT 11MM
25-122 WR COMB 12PT SHT 11/16 FP 27-818 WR ANG OE 9/16 15&60D FP 38-117 SKT 3/8DR 12PT 17MM 39-310 SKT 1/2DR 12PT 10MM DP 47-012 SKT IMP 1/2DR 6PT 12MM
25-124 WR COMB 12PT SHT 3/4 FP 27-820 WR ANG OE 5/8 15&60D FP 38-118 SKT 3/8DR 12PT 18MM 39-311 SKT 1/2DR 12PT 11MM DP 47-013 SKT IMP 1/2DR 6PT 13MM
25-126 WR COMB 12PT SHT 13/16 FP 27-822 WR ANG OE 11/16 15&60D FP 38-119 SKT 3/8DR 12PT 19MM 39-312 SKT 1/2DR 12PT 12MM DP 47-014 SKT IMP 1/2DR 6PT 14MM
25-128 WR COMB 12PT SHT 7/8 FP 27-824 WR ANG OE 3/4 15&60D FP 38-120 SKT 3/8DR 12PT 20MM 39-313 SKT 1/2DR 12PT 13MM DP 47-015 SKT IMP 1/2DR 6PT 15MM
25-130 WR COMB 12PT SHT 15/16 FP 27-826 WR ANG OE 13/16 15&60D FP 38-121 SKT 3/8DR 12PT 21MM 39-314 SKT 1/2DR 12PT 14MM DP 47-016 SKT IMP 1/2DR 6PT 16MM
25-132 WR COMB 12PT SHT 1 FP 27-828 WR ANG OE 7/8 15&60D FP 38-122 SKT 3/8DR 12PT 22MM 39-315 SKT 1/2DR 12PT 15MM DP 47-017 SKT IMP 1/2DR 6PT 17MM
25-162 WR COMB 12PT X SHT 3/8 FP 27-830 WR ANG OE 15/16 15&60D FP 38-123 SKT 3/8DR 12PT 23MM 39-316 SKT 1/2DR 12PT 16MM DP 47-018 SKT IMP 1/2DR 6PT 18MM
25-164 WR COMB 12PT X SHT 7/16 FP 27-832 WR ANG OE 1 15&60D FP 38-126 SKT 3/8DR 12PT 26MM 39-317 SKT 1/2DR 12PT 17MM DP 47-019 SKT IMP 1/2DR 6PT 19MM
25-166 WR COMB 12PT X SHT 1/2 FP 27-834 WR ANG OE 1-1/16 15&60D FP 38-206 SKT 3/8DR 6PT 6MM DP 39-318 SKT 1/2DR 12PT 18MM DP 47-020 SKT IMP 1/2DR 6PT 20MM
25-168 WR COMB 12PT X SHT 9/16 FP 27-836 WR ANG OE 1-1/8 15&60D FP 38-207 SKT 3/8DR 6PT 7MM DP 39-319 SKT 1/2DR 12PT 19MM DP 47-021 SKT IMP 1/2DR 6PT 21MM
25-170 WR COMB 12PT X SHT 5/8 FP 27-840 WR ANG OE 1-1/4 15&60D FP 38-208 SKT 3/8DR 6PT 8MM DP 39-320 SKT 1/2DR 12PT 20MM DP 47-022 SKT IMP 1/2DR 6PT 22MM
25-172 WR COMB 12PT X SHT 11/16 FP 27-903 WR ANG OE 13/64 MDGT 38-209 SKT 3/8DR 6PT 9MM DP 39-321 SKT 1/2DR 12PT 21MM DP 47-024 SKT IMP 1/2DR 6PT 24MM
25-174 WR COMB 12PT X SHT 3/4 FP 15&75D FP 38-210 SKT 3/8DR 6PT 10MM DP 39-322 SKT 1/2DR 12PT 22MM DP 47-210 SKT IMP 1/2DR 6PT 10MM DP
25-208 WR COMB 12PT LNG 1/4 FP 27-904 WR ANG OE 15/64 MDGT 38-211 SKT 3/8DR 6PT 11MM DP 39-323 SKT 1/2DR 12PT 23MM DP 47-211 SKT IMP 1/2DR 6PT 11MM DP
25-210 WR COMB 12PT LNG 5/16 FP 15&75D FP 38-212 SKT 3/8DR 6PT 12MM DP 39-324 SKT 1/2DR 12PT 24MM DP 47-212 SKT IMP 1/2DR 6PT 12MM DP
25-212 WR COMB 12PT LNG 3/8 FP 27-907 WR ANG OE 7/32 MDGT 15&75D FP 38-213 SKT 3/8DR 6PT 13MM DP 39-325 SKT 1/2DR 12PT 25MM DP 47-213 SKT IMP 1/2DR 6PT 13MM DP
25-214 WR COMB 12PT LNG 7/16 FP 27-908 WR ANG OE 1/4 MDGT 15&75D FP 38-214 SKT 3/8DR 6PT 14MM DP 39-326 SKT 1/2DR 12PT 26MM DP 47-214 SKT IMP 1/2DR 6PT 14MM DP
25-216 WR COMB 12PT LNG 1/2 FP 27-909 WR ANG OE 9/32 MDGT 15&75D FP 38-215 SKT 3/8DR 6PT 15MM DP 39-327 SKT 1/2DR 12PT 27MM DP 47-215 SKT IMP 1/2DR 6PT 15MM DP
25-218 WR COMB 12PT LNG 9/16 FP 27-910 WR ANG OE 5/16 MDGT 15&75D FP 38-216 SKT 3/8DR 6PT 16MM DP 39-328 SKT 1/2DR 12PT 28MM DP 47-216 SKT IMP 1/2DR 6PT 16MM DP
25-220 WR COMB 12PT LNG 5/8 FP 27-911 WR ANG OE 11/32 MDGT 38-217 SKT 3/8DR 6PT 17MM DP 39-329 SKT 1/2DR 12PT 29MM DP 47-217 SKT IMP 1/2DR 6PT 17MM DP
25-222 WR COMB 12PT LNG 11/16 FP 15&75D FP 38-218 SKT 3/8DR 6PT 18MM DP 39-330 SKT 1/2DR 12PT 30MM DP 47-218 SKT IMP 1/2DR 6PT 18MM DP

Master Set Contents

25-224 WR COMB 12PT LNG 3/4 FP 27-912 WR ANG OE 3/8 MDGT 15&75D FP 38-219 SKT 3/8DR 6PT 19MM DP 39-332 SKT 1/2DR 12PT 32MM DP 47-219 SKT IMP 1/2DR 6PT 19MM DP
25-226 WR COMB 12PT LNG 13/16 FP 28-130 WR FLR NUT 6PT 3/8X7/16 FP 38-220 SKT 3/8DR 6PT 20MM DP 39-711 SKT 1/2DR HEX BIT 6MM 47-220 SKT IMP 1/2DR 6PT 20MM DP
25-228 WR COMB 12PT LNG 7/8 FP 28-135 WR FLR NUT 6PT 1/2X9/16 FP 38-221 SKT 3/8DR 6PT 21MM DP 39-713 SKT 1/2DR HEX BIT 8MM 47-221 SKT IMP 1/2DR 6PT 21MM DP
25-230 WR COMB 12PT LNG 15/16 FP 28-140 WR FLR NUT 6PT 5/8X11/16 FP 38-222 SKT 3/8DR 6PT 22MM DP 39-715 SKT 1/2DR HEX BIT 10MM 47-222 SKT IMP 1/2DR 6PT 22MM DP
25-232 WR COMB 12PT LNG 1 FP 28-145 WR FLR NUT 12PT 3/4X1 FP 38-223 SKT 3/8DR 6PT 23MM DP 39-717 SKT 1/2DR HEX BIT 12MM 47-224 SKT IMP 1/2DR 6PT 24MM DP
25-234 WR COMB 12PT LNG 1-1/16 FP 28-150 WR FLR NUT 12PT 7/8X1-1/8 FP 38-306 SKT 3/8DR 12PT 6MM DP 39-719 SKT 1/2DR HEX BIT 14MM 485 GASKET SCRAPER
25-236 WR COMB 12PT LNG 1-1/8 FP 28-406 WR ADJ 6 38-307 SKT 3/8DR 12PT 7MM DP 39-722 SKT 1/2DR HEX BIT 17MM 52-004 WR(52-104)
25-240 WR COMB 12PT LNG 1-1/4 FP 28-408 WR ADJ 8 38-308 SKT 3/8DR 12PT 8MM DP 39-751 SKT 1/2DR HEX BIT 6MM LNG 52-005 WR(52-105)
25-242 WR COMB 12PT LNG 1-5/16 28-410 WR ADJ 10 38-309 SKT 3/8DR 12PT 9MM DP 39-753 SKT 1/2DR HEX BIT 8MM LNG 52-006 WR(52-106)
25-244 WR COMB 12PT LNG 1-3/8 28-412 WR ADJ 12 38-310 SKT 3/8DR 12PT 10MM DP 39-755 SKT 1/2DR HEX BIT 10MM LNG 52-007 WR(52-107)
25-246 WR COMB 12PT LNG 1-7/16 28-418 WR ADJ 18 38-311 SKT 3/8DR 12PT 11MM DP 39-757 SKT 1/2DR HEX BIT 12MM LNG 52-008 WR(52-108)
25-248 WR COMB 12PT LNG 1-1/2 37-004 SKT 1/4DR 6PT 4MM 38-312 SKT 3/8DR 12PT 12MM DP 39-759 SKT 1/2DR HEX BIT 14MM LNG 52-083 WR(52-183)
25-252 WR COMB 12PT LNG 1-5/8 37-005 SKT 1/4DR 6PT 5MM 38-313 SKT 3/8DR 12PT 13MM DP 39-762 SKT 1/2DR HEX BIT 17MM LNG 52-109 WR COMB 12PT SHT 9MM FP
25-254 WR COMB 12PT LNG 1-11/16 37-006 SKT 1/4DR 6PT 6MM 38-314 SKT 3/8DR 12PT 14MM DP 40-122 SKT 3/4DR 12PT 22MM 52-160 WR COMB 12PT XSHT 10MM FP
25-256 WR COMB 12PT LNG 1-3/4 37-007 SKT 1/4DR 6PT 7MM 38-315 SKT 3/8DR 12PT 15MM DP 40-123 SKT 3/4DR 12PT 23MM 52-161 WR COMB 12PT XSHT 11MM FP
25-258 WR COMB 12PT LNG 1-13/16 37-008 SKT 1/4DR 6PT 8MM 38-316 SKT 3/8DR 12PT 16MM DP 40-124 SKT 3/4DR 12PT 24MM 52-162 WR COMB 12PT XSHT 12MM FP
25-260 WR COMB 12PT LNG 1-7/8 37-009 SKT 1/4DR 6PT 9MM 38-317 SKT 3/8DR 12PT 17MM DP 40-125 SKT 3/4DR 12PT 25MM 52-163 WR COMB 12PT XSHT 13MM FP
25-264 WR COMB 12PT LNG 2 37-010 SKT 1/4DR 6PT 10MM 38-318 SKT 3/8DR 12PT 18MM DP 40-126 SKT 3/4DR 12PT 26MM 52-164 WR COMB 12PT XSHT 14MM FP
25-412 WR COMB 12PT XL 3/8 FP 37-011 SKT 1/4DR 6PT 11MM 38-319 SKT 3/8DR 12PT 19MM DP 40-127 SKT 3/4DR 12PT 27MM 52-165 WR COMB 12PT XSHT 15MM FP
25-414 WR COMB 12PT XL 7/16 FP 37-012 SKT 1/4DR 6PT 12MM 38-320 SKT 3/8DR 12PT 20MM DP 40-128 SKT 3/4DR 12PT 28MM 52-166 WR COMB 12PT XSHT 16MM FP
25-416 WR COMB 12PT XL 1/2 FP 37-013 SKT 1/4DR 6PT 13MM 38-321 SKT 3/8DR 12PT 21MM DP 40-129 SKT 3/4DR 12PT 29MM 52-167 WR COMB 12PT XSHT 17MM FP
25-418 WR COMB 12PT XL 9/16 FP 37-014 SKT 1/4DR 6PT 14MM 38-322 SKT 3/8DR 12PT 22MM DP 40-130 SKT 3/4DR 12PT 30MM 52-168 WR COMB 12PT XSHT 18MM FP
25-420 WR COMB 12PT XL 5/8 FP 37-083 SKT 1/4DR 6PT 5.5MM 38-323 SKT 3/8DR 12PT 23MM DP 40-132 SKT 3/4DR 12PT 32MM 52-169 WR COMB 12PT X SHT 19MM FP
25-422 WR COMB 12PT XL 11/16 FP 37-204 SKT 1/4DR 6PT 4MM DP 38-707 SKT 3/8DR HEX BIT 4MM 40-135 SKT 3/4DR 12PT 35MM 52-207 WR COMB 12PT LNG 7MM
25-424 WR COMB 12PT XL 3/4 FP 37-205 SKT 1/4DR 6PT 5MM DP 38-709 SKT 3/8DR HEX BIT 5MM 40-136 SKT 3/4DR 12PT 36MM 52-208 WR COMB 12PT LNG 8MM
25-426 WR COMB 12PT XL 13/16 FP 37-283 SKT 1/4DR 6PT 5.5MM DP 38-711 SKT 3/8DR HEX BIT 6MM 40-138 SKT 3/4DR 12PT 38MM 52-209 WR COMB 12PT LNG 9MM
25-428 WR COMB 12PT XL 7/8 FP 37-206 SKT 1/4DR 6PT 6MM DP 38-712 SKT 3/8DR HEX BIT 7MM 40-141 SKT 3/4DR 12PT 41MM 52-210 WR COMB 12PT LNG 10MM
25-430 WR COMB 12PT XL 15/16 FP 37-207 SKT 1/4DR 6PT 7MM DP 38-713 SKT 3/8DR HEX BIT 8MM 40-142 SKT 3/4DR 12PT 42MM 52-211 WR COMB 12PT LNG 11MM
25-432 WR COMB 12PT XL 1 FP 37-208 SKT 1/4DR 6PT 8MM DP 38-714 SKT 3/8DR HEX BIT 9MM 40-146 SKT 3/4DR 12PT 46MM 52-212 WR COMB 12PT LNG 12MM
25-508 WR COMB FLX HD 12PT 1/4 FP 37-209 SKT 1/4DR 6PT 9MM DP 38-715 SKT 3/8DR HEX BIT 10MM 40-150 SKT 3/4DR 12PT 50MM 52-213 WR COMB 12PT LNG 13MM
25-510 WR COMB FLX HD 12PT 5/16 FP 37-210 SKT 1/4DR 6PT 10MM DP 38-747 SKT 3/8DR HEX BIT 4MM LNG 40-322 SKT 3/4DR 12PT 22MM DP 52-214 WR COMB 12PT LNG 14MM
25-512 WR COMB FLX HD 12PT 3/8 FP 37-211 SKT 1/4DR 6PT 11MM DP 38-749 SKT 3/8DR HEX BIT 5MM LNG 40-323 SKT 3/4DR 12PT 23MM DP 52-215 WR COMB 12PT LNG 15MM
25-514 WR COMB FLX HD 12PT 7/16 FP 37-212 SKT 1/4DR 6PT 12MM DP 38-751 SKT 3/8DR HEX BIT 6MM LNG 40-324 SKT 3/4DR 12PT 24MM DP 52-216 WR COMB 12PT LNG 16MM
25-516 WR COMB FLX HD 12PT 1/2 FP 37-213 SKT 1/4DR 6PT 13MM DP 38-752 SKT 3/8DR HEX BIT 7MM LNG 40-327 SKT 3/4DR 12PT 27MM DP 52-217 WR COMB 12PT LNG 17MM
25-518 WR COMB FLX HD 12PT 9/16 FP 37-214 SKT 1/4DR 6PT 14MM DP 38-753 SKT 3/8DR HEX BIT 8MM LNG 40-330 SKT 3/4DR 12PT 30MM DP 52-218 WR COMB 12PT LNG 18MM
25-520 WR COMB FLX HD 12PT 5/8 FP 37-703 SKT 1/4DR HEX BIT 2MM 38-755 SKT 3/8DR HEX BIT 10MM LNG 40-332 SKT 3/4DR 12PT 32MM DP 52-219 WR COMB 12PT LNG 19MM
25-522 WR COMB FLX HD 12PT 11/16 FP 37-704 SKT 1/4DR HEX BIT 2.5MM 38-850 WR 3/8DR CRFT 10 MM 40-335 SKT 3/4DR 12PT 35MM DP 52-220 WR COMB 12PT LNG 20MM
25-524 WR COMB FLX HD 12PT 3/4 FP 37-705 SKT 1/4DR HEX BIT 3MM 38-851 WR 3/8DR CRFT 11 MM 40-336 SKT 3/4DR 12PT 36MM DP 52-221 WR COMB 12PT LNG 21MM
25-526 WR COMB FLX HD 12PT 13/16 FP 37-707 SKT 1/4DR HEX BIT 4MM 38-852 WR 3/8DR CRFT 12 MM 40-338 SKT 3/4DR 12PT 38MM DP 52-222 WR COMB 12PT LNG 22MM
25-528 WR COMB FLX HD 12PT 7/8 FP 37-709 SKT 1/4DR HEX BIT 5MM 38-853 WR 3/8DR CRFT 13 MM 40-341 SKT 3/4DR 12PT 41MM DP 52-233 WR COMB 12PT LNG 23MM
25-600 SET WR COMB MDGT 10PC SAE FP 37-711 SKT 1/4DR HEX BIT 6MM 38-854 WR 3/8DR CRFT 14 MM 40-346 SKT 3/4DR 12PT 46MM DP 52-224 WR COMB 12PT LNG 24MM
26-022 WR OE 1/4X5/16 FP 38-006 SKT 3/8DR 6PT 6MM 38-855 WR 3/8DR CRFT 15 MM 40-350 SKT 3/4DR 12PT 50MM DP 53-016 WR OE 6X7MM FP
26-043 WR OE 3/8X7/16 FP 38-007 SKT 3/8DR 6PT 7MM 38-856 WR 3/8DR CRFT 16 MM 46-607 SKT IMP 3/8DR 6PT 7MM 53-022 WR OE 8X9MM FP
26-067 WR OE 1/2X9/16 FP 38-008 SKT 3/8DR 6PT 8MM 38-857 WR 3/8DR CRFT 17 MM 46-608 SKT IMP 3/8DR 6PT 8MM 53-034 WR OE 10X11MM FP
26-094 WR OE 5/8X11/16 FP 38-009 SKT 3/8DR 6PT 9MM 38-858 WR 3/8DR CRFT 18 MM 46-609 SKT IMP 3/8DR 6PT 9MM 53-052 WR OE 12X13MM FP
26-121 WR OE 3/4X13/16 FP 38-010 SKT 3/8DR 6PT 10MM 38-859 WR 3/8DR CRFT 19 MM 46-610 SKT IMP 3/8DR 6PT 10MM 53-067 WR OE 14X15MM FP
26-139 WR OE 7/8X15/16 FP 38-011 SKT 3/8DR 6PT 11MM 38-861 WR 3/8DR CRFT 21 MM 46-611 SKT IMP 3/8DR 6PT 11MM 53-082 WR OE 16X17MM FP
26-163 WR OE 1X1-1/8 FP 38-012 SKT 3/8DR 6PT 12MM 38-862 WR 3/8DR CRFT 22 MM 46-612 SKT IMP 3/8DR 6PT 12MM 53-096 WR OE 18X19MM FP
26-169 WR OE 1-1/16X1-1/4 FP 38-013 SKT 3/8DR 6PT 13MM 39-110 SKT 1/2DR 12PT 10MM 46-613 SKT IMP 3/8DR 6PT 13MM 53-115 WR OE 20X22MM FP
26-187 WR OE 1-5/16X1-1/2 FP 38-014 SKT 3/8DR 6PT 14MM 39-111 SKT 1/2DR 12PT 11MM 46-614 SKT IMP 3/8DR 6PT 14MM 53-119 WR OE 21X23MM FP
26-190 WR OE 1-3/8X1-7/16 FP 38-015 SKT 3/8DR 6PT 15MM 39-112 SKT 1/2DR 12PT 12MM 46-615 SKT IMP 3/8DR 6PT 15MM 53-142 WR OE 24X26MM FP
26-534 WR OE RAT DBL 5/16X3/8 38-016 SKT 3/8DR 6PT 16MM 39-113 SKT 1/2DR 12PT 13MM 46-616 SKT IMP 3/8DR 6PT 16MM 53-534 WR RAT DBL OE 10X11MM
26-559 WR OE RAT DBL 7/16X1/2 38-017 SKT 3/8DR 6PT 17MM 39-114 SKT 1/2DR 12PT 14MM 46-617 SKT IMP 3/8DR 6PT 17MM 53-555 WR RAT DBL OE 12X14MM
26-580 WR OE RAT DBL 9/16X5/8 38-018 SKT 3/8DR 6PT 18MM 39-115 SKT 1/2DR 12PT 15MM 46-618 SKT IMP 3/8DR 6PT 18MM 53-561 WR RAT DBL OE 13X15MM
26-588 WR OE RAT DBL 11/16X3/4 38-019 SKT 3/8DR 6PT 19MM 39-116 SKT 1/2DR 12PT 16MM 46-619 SKT IMP 3/8DR 6PT 19MM 53-585 WR RAT DBL OE 16X18MM
27-343 WR BX 12PT LNG 3/8X7/16 FP 38-020 SKT 3/8DR 6PT 20MM 39-117 SKT 1/2DR 12PT 17MM 46-620 SKT IMP 3/8DR 6PT 20MM 53-591 WR RAT DBL OE 17X19MM
27-367 WR BX 12PT LNG 1/2X9/16 FP 38-021 SKT 3/8DR 6PT 21MM 39-118 SKT 1/2DR 12PT 18MM 46-621 SKT IMP 3/8DR 6PT 21MM 54-322 WR BX LNG 12PT 8X9MM FP
27-394 WR BX 12PT LNG 5/8X11/16 FP 38-022 SKT 3/8DR 6PT 22MM 39-119 SKT 1/2DR 12PT 19MM 46-622 SKT IMP 3/8DR 6PT 22MM 54-334 WR BX LNG 12PT 10X11MM FP
27-424 WR BX 12PT LNG 3/4X7/8 FP 38-023 SKT 3/8DR 6PT 23MM 39-120 SKT 1/2DR 12PT 20MM 46-707 SKT IMP 3/8DR 6PT 7MM DP 54-352 WR BX LNG 12PT 12X13MM FP
27-451 WR BX 12PT LNG 15/16X1 FP 38-026 SKT 3/8DR 6PT 26MM 39-121 SKT 1/2DR 12PT 21MM 46-708 SKT IMP 3/8DR 6PT 8MM DP 54-367 WR BX LNG 12PT 14X15MM FP
27-466 WR BX 12PT LNG 1-1/16X1-1/8 FP 38-106 SKT 3/8DR 12PT 6MM 39-122 SKT 1/2DR 12PT 22MM 46-709 SKT IMP 3/8DR 6PT 9MM DP 54-385 WR BX LNG 12PT 16X18MM FP
27-510 WR GEARED BOX 12PT 3/8 FP 38-107 SKT 3/8DR 12PT 7MM 39-123 SKT 1/2DR 12PT 23MM 46-710 SKT IMP 3/8DR 6PT 10MM DP Continued . . .

A-2
 A
Master Set Contents
Set 15-001 1195 Pc. Ultimate Master Set Cont.
54-391 WR BX LNG 12PT 17X19MM FP 66-262 SCRDR CAB 3/16X4 67-183 PLR DIAG CUT 4-1/2 W/GRP & 69-515 HMR BRS 2.5LB W/GRP 70-235 PNCH CNTR 3/8
54-415 WR BX LNG 12PT 20X22MM FP 66-268 SCRDR CAB 3/16X8 SPR 69-530 HMR DEAD BLOW STD 10OZ 70-239 PNCH CNTR 1/2
54-419 WR BX LNG 12PT 21X23MM FP 66-321 SCRDR TORX T10X3 67-240 PLR NDL NSE LNG REACH 69-532 HMR DEAD BLOW STD 21OZ 70-255 PNCH PRCK 3/8
54-445 WR BX LNG 12PT 24X27MM FP 66-323 SCRDR TORX T15X3 11-1/2 W 69-534 HMR DEAD BLOW STD 52OZ 70-260 PNCH ROLL PIN 1/16 TIP
54-510 WR GEARED BX 12PT 10MM FP 66-324 SCRDR TORX T15X1-1/4 67-241 PLR NDL BENT NSE LNG REACH 69-541 HMR DEAD BLW SLIMLINE 14OZ 70-262 PNCH ROLL PIN 3/32 TIP
54-511 WR GEARED BX 12PT 11MM FP 66-326 SCRDR TORX T20X3 W/G 69-543 HMR DEAD BLW SLIMLINE 21OZ 70-264 PNCH ROLL PIN 1/8 TIP
54-512 WR GEARED BX 12PT 12MM FP 66-327 SCRDR TORX T25X3 67-255 PLR CHN NSE 5-3/8 W/GRP 69-547 HMR DEAD BLW SLIMLINE 32OZ 70-266 PNCH ROLL PIN 5/32 TIP
54-513 WR GEARED BX 12PT 13MM FP 66-329 SCRDR TORX T27X4 67-307 PLR CHN NSE 7-3/4 SD CUT 69-605 HMR DRL 3LB WD HDL 70-268 PNCH ROLL PIN 3/16 TIP
54-514 WR GEARED BX 12PT 14MM FP 66-330 SCRDR TORX T30X4 W/GRP 69-625 HMR CRSS PN 3LB WD HDL 70-270 PNCH ROLL PIN 7/32 TIP
54-515 WR GEARED BX 12PT 15MM FP 66-332 SCRDR TORX T40X6 67-331 PLR CHB NSE 7-7/8 STRPR 67-436 6" LOCKING PLIERS 70-272 PNCH ROLL PIN 1/4 TIP
54-516 WR GEARED BX 12PT 16MM FP 66-501 SCRDR SLT 1/4X4 CUSH GRP W/GRP 70-000 PUNCH & CHISEL HOLDER 70-301 CHSL CLD 1/4 TIP
54-517 WR GEARED BX 12PT 17MM FP 66-502 SCRDR SLT 3/16X3 CUSH GRP 67-357 PLR NDL NSE 5-7/16 W/GRP 70-042 PNCH PIN TOOL STEEL 70-303 CHSL CLD 5/16 TIP
54-518 WR GEARED BX 12PT 18MM FP 66-504 SCRDR SLT 5/16X6 CUSH GRP 67-401 PLR NDL NSE 5-7/8 CURV 5/32 TIP LNG 70-305 CHSL CLD 3/8 TIP
54-519 WR GEARED BX 12PT 19MM FP 66-505 SCRDR SLT 1/4X4 CUSH GRP W/GRP 70-043 PNCH PIN TOOL STEEL 70-309 CHSL CLD 1/2 TIP
55-310 WR RAT FLR NUT 12PT 10MM 66-507 SCRDR SLT 3/8X8 CUSH GRP 67-503 PLR DKBL 8 W/GRP 3/16 TIP LNG 70-311 CHSL CLD 5/8 TIP
55-311 WR RAT FLR NUT 12PT 11MM 66-524 SCRDR PHLP #1X3 CUSH GRP 67-535 PLR END CUT 7-3/8 W/GRP 70-044 PNCH PIN TOOL STEEL 70-313 CHSL CLD 3/4 TIP
55-312 WR RAT FLR NUT 12PT 12MM 66-527 SCRDR PHLP #2X4 CUSH GRP 67-667 PLR SLP JNT 6-1/2 W/GRP 7/32 TIP LNG 70-315 CHSL CLD 7/8 TIP
55-313 WR RAT FLR NUT 12PT 13MM 66-530 SCRDR PHLP #3X6 CUSH GRP 67-669 PLR SLP JNT 8 W/GRP 70-045 PNCH PIN TOOL STEEL 70-317 CHSL CLD 1 TIP
55-314 WR RAT FLR NUT 12PT 14MM 66-806 NUT DR 3/16 HOLL SHFT 67-671 PLR SLP JNT 10 W/GRP 1/4 TIP LNG 70-319 CHSL CLD 1-1/8 TIP
55-315 WR RAT FLR NUT 12PT 15MM 66-807 NUT DR 7/32 HOLL SHFT 67-717 PLR TNG&GRV 5 W/GRP 70-047 PNCH PIN TOOL STEEL 70-503 ALIGNING BAR PINCH 5/8X16
55-316 WR RAT FLR NUT 12PT 16MM 66-808 NUT DR 1/4 HOLL SHFT 67-779 PLR TNG&GRV 10 W/GRP 5/16 TIP LNG 70-505 ALIGNING BAR PINCH 3/4X24
55-317 WR RAT FLR NUT 12PT 17MM 66-809 NUT DR 9/32 HOLL SHFT 67-781 PLR TNG&GRV 12 W/GRP 70-101 PNCH PIN 1/16 TIP 70-519 CHSL BAR ROLL1/2X15
55-318 WR RAT FLR NUT 12PT 18MM 66-810 NUT DR 5/16 HOLL SHFT 67-783 PLR TNG&GRV 16 W/GRP 70-103 PNCH PIN 3/32 TIP 70-521 CHSL BAR ROLL 5/8X18
55-319 WR RAT FLR NUT 12PT 19MM 66-811 NUT DR 11/32 HOLL SHFT 67-791 PLR TNG&GRV PIPE WR 12-3/4 70-105 PNCH PIN 1/8 TIP 70-531 BAR PRY 12 HDL
56134 11 PC T-HANDLE HEX KEY SET 66-812 NUT DR 3/8 HOLL SHFT W/G 70-107 PNCH PIN 5/32 TIP 70-533 BAR PRY 17 HDL
56184 11 PC SCRDR HEX KEY SET 66-814 NUT DR 7/16 HOLL SHFT 67-830 PLR IGNITION 5-1/4 W/GRP 70-109 PNCH PIN 3/16 TIP 70-535 BAR PRY 25 HDL
56188 8 PC MET SCRDR HEX KEY SET 66-816 NUT DR 1/2 HOLL SHFT 67-905 PLR ELECTRICIAN’S 70-110 PNCH PIN TOOL STL 1/16 TIP 70-537 BAR PRY 31 HDL
56192 22 PC BALL PLUS SET 66-818 NUT DR 9/16 HOLL SHFT 68-079 SET RET RNG PLR 70-112 PNCH PIN TOOL STL 3/32 TIP 70-793 SET FEELER GAUGE 25 BLADE
64-042 WR TRQ 3/8DR 100-1000 IN/LB 66-820 NUT DR 5/8 HOLL SHFT 68-241 SNIPS MINI 6-1/2 70-114 PNCH PIN TOOL STL 1/8 TIP 70-865 HCKS FLT FRM
64-086 WR TRQ 1/2DR 25-250 FT/LB 66-829 NUT DR 4MM HOLL SHFT 68-261 SNIPS AVN 10 OFF LFT&STRT 70-116 PNCH PIN TOOL STL 5/32 TIP 70-925 TELESCP MIRR 2-1/4 DIA
Master Set Contents

66-150 SCRDR PHLP #2X1-1/2 66-831 NUT DR 5MM HOLL SHFT 68-263 SNIPS AVN 10 OFF RGT&STRT 70-118 PNCH PIN TOOL STL 3/16 TIP 70-929 TELESCP MIRROR 2-1/8 DIA
66-152 SCRDR PHLP #0X2-1/2 66-832 NUT DR 5.5MM HOLL SHFT 68-275 SNIPS STRT 12-3/4 70-120 PNCH PIN TOOL STL 7/32 TIP 70-933 RETR TL MAG TELESCP
66-153 SCRDR PHLP #1X3 66-833 NUT DR 6MM HOLL SHFT 68-310 KNFE UTIL RETRACT 70-122 PNCH PIN TOOL STL 1/4 TIP 70-970 SCREW EXTRACTOR SET
66-155 SCRDR PHLP #1X6 66-834 NUT DR 7MM HOLL SHFT 68-445 TP MEAS 1X25 LCK AUTO 70-124 PNCH PIN TOOL STL 9/32 TIP 72-498 PULLER KIT MULTI PURP
66-156 SCRDR PHLP #2X4 66-835 NUT DR 8MM HOLL SHFT 69-009 HMR SFT FC NO TIP 1-1/2D 70-126 PNCH PIN TOOL STL 5/16 TIP 73-010 WR PIPE 10 HD
66-158 SCRDR PHLP #2X8 66-836 NUT DR 9MM HOLL SHFT 12OZ 70-128 PNCH PIN TOOL STL 3/8 TIP 73-014 WR PIPE 14 HD
66-161 SCRDR PHLP #3X6 66-837 NUT DR 10MM HOLL SHFT 69-019 HMR SFT FC NO TIP 2D 2LB 70-129 PNCH PIN 7/32 TIP 73-018 WR PIPE 18 HD
66-164 SCRDR PHLP #4X8 66-838 NUT DR 11MM HOLL SHFT 69-155 HMR TIP 1-1/2 THG GREEN 70-131 PNCH PIN 1/4 TIP 73-295 CHAIN 3/8 TO 4
66-202 SCRDR SLT 1/8X3 SQ 66-839 NUT DR 12MM HOLL SHFT 69-156 HMR TIP 1-1/2 MED HD CREAM 70-155 PNCH START 3/32 TIP 78-408 C-CL DP THRT 8 STD SCREW
66-203 SCRDR SLT 3/16X4 SQ 66-840 NUT DR 13MM HOLL SHFT 69-158 HMR TIP 1-1/2 HD BLACK 70-157 PNCH START 1/8 TIP BLK (2)
66-208 SCRDR SLT 1/4X4 SQ 66-924 SCR START SLT 5 69-165 HMR TIP 2 TGH GREEN 70-161 PNCH START 3/16 TIP 67-407 7" LOCKING PLIERS
66-217 SCRDR SLT 5/16X6 SQ 66-933 SCR START PHLP 5 69-166 HMR TIP 2 MED HD CREAM 70-163 PNCH START 7/32 TIP
66-220 SCRDR SLT 3/8X8 SQ 66-943 SCR START NUT 5 69-168 HMR TIP 2 HD BLACK 70-165 PNCH START 1/4 TIP
66-226 SCRDR SLT 7/16X12 SQ 67-069 PLR LNMN 9-1/2 W/GRP 69-444 HMR BLL PN 8OZ WD HDL 70-189 PNCH DRFT 1/8 TIP
66-232 SCRDR SLT 1/4X1-1/2 SQ 67-101 PLR DIAG LNG REACH 11-1/8 69-448 HMR BLL PN 1LB WD HDL 70-193 PNCH DRFT 3/16 TIP
66-253 SCRDR CAB 1/8X3 HD W 69-452 HMR BLL PN 2LB WD HDL 70-195 PNCH DRFT 7/32 TIP
66-255 SCRDR CAB 1/8X4 67-113 PLR DIAG CUT 8 HD W/GRP 69-454 HMR BLL PN 2-1/2LB WD HDL 70-197 PNCH DRFT 1/4 TIP
66-259 SCRDR CAB 1/8X8 67-161 PLR DIAG CUT 6-3/8 W/GRP 69-490 RBR MALL 32OZ 16-1/2 70-199 PNCH DRFT 5/16 TIP

Set 15-006 761 Pc. Master Set - Tools Only

10-004 SKT 1/4DR 6PT 1/8 10-821 SKT 1/4DR PHLP BIT #1 11-314 SKT 3/8DR 12PT 7/16 DP 11-848 WR 3/8DR CRFT FLR NUT 1 12-122 SKT 1/2DR 12PT 11/16
10-005 SKT 1/4DR 6PT 5/32 10-822 SKT 1/4DR PHLP BIT #2 11-316 SKT 3/8DR 12PT 1/2 DP 11-849 WR 3/8DR CRFT FLR NUT 1-1/16 12-124 SKT 1/2DR 12PT 3/4
10-006 SKT 1/4DR 6PT 3/16 10-823 SKT 1/4DR PHLP BIT #3 11-318 SKT 3/8DR 12PT 9/16 DP 11-850 WR 3/8DR CRFT 3/8 12-126 SKT 1/2DR 12PT 13/16
10-007 SKT 1/4DR 6PT 7/32 10-870 SKT 1/4DR TRX BIT T10 11-320 SKT 3/8DR 12PT 5/8 DP 11-851 WR 3/8DR CRFT 7/16 12-128 SKT 1/2DR 12PT 7/8
10-008 SKT 1/4DR 6PT 1/4 10-872 SKT 1/4DR TRX BIT T15 11-322 SKT 3/8DR 12PT 11/16 DP 11-852 WR 3/8DR CRFT 1/2 12-130 SKT 1/2DR 12PT 15/16
10-009 SKT 1/4DR 6PT 9/32 10-874 SKT 1/4DR TRX BIT T20 11-324 SKT 3/8DR 12PT 3/4 DP 11-853 WR 3/8DR CRFT 9/16 12-132 SKT 1/2DR 12PT 1
10-010 SKT 1/4DR 6PT 5/16 10-876 SKT 1/4DR TRX BIT T25 11-326 SKT 3/8DR 12PT 13/16 DP 11-854 WR 3/8DR CRFT 5/8 12-134 SKT 1/2DR 12PT 1-1/16
10-011 SKT 1/4DR 6PT 11/32 10-878 SKT 1/4DR TRX BIT T27 11-328 SKT 3/8DR 12PT 7/8 DP 11-855 WR 3/8DR CRFT 11/16 12-136 SKT 1/2DR 12PT 1-1/8
10-012 SKT 1/4DR 6PT 3/8 10-880 SKT 1/4DR TRX BIT T30 11-330 SKT 3/8DR 12PT 15/16 DP 11-856 WR 3/8DR CRFT 3/4 12-140 SKT 1/2DR 12PT 1-1/4
10-014 SKT 1/4DR 6PT 7/16 10-918 HDL FLX 1/4DR 5-3/4 11-332 SKT 3/8DR 12PT 1 DP 11-857 WR 3/8DR CRFT 13/16 12-316 SKT 1/2DR 12PT 1/2 DP
10-016 SKT 1/4DR 6PT 1/2 10-921 EXTEN 1/4DR 2 11-408 SKT 3/8DR 8PT 1/4 11-858 WR 3/8DR CRFT 7/8 12-318 SKT 1/2DR 12PT 9/16 DP
10-018 SKT 1/4DR 6PT 9/16 10-922 EXTEN 1/4DR 4 11-410 SKT 3/8DR 8PT 5/16 11-872 SKT 3/8DR TRX BIT T15 12-320 SKT 1/2DR 12PT 5/8 DP
10-204 SKT 1/4DR 6PT 1/8 DP 10-923 EXTEN 1/4DR 6 11-412 SKT 3/8DR 8PT 3/8 11-874 SKT 3/8DR TRX BIT T20 12-322 SKT 1/2DR 12PT 11/16 DP
10-205 SKT 1/4DR 6PT 5/32 DP 10-925 EXTEN 1/4DR 14 11-414 SKT 3/8DR 8PT 7/16 11-876 SKT 3/8DR TRX BIT T25 12-324 SKT 1/2DR 12PT 3/4 DP
10-206 SKT 1/4DR 6PT 3/16 DP 10-929 EXTEN 1/4DR FLX 6 11-416 SKT 3/8DR 8PT 1/2 11-878 SKT 3/8DR TRX BIT T27 12-326 SKT 1/2DR 12PT 13/16 DP
10-207 SKT 1/4DR 6PT 7/32 DP 10-931 ADP 1/4DR LCK 1-5/8 11-512 SKT 3/8DR UNV 12PT 3/8 11-880 SKT 3/8DR TRX BIT T30 12-328 SKT 1/2DR 12PT 7/8 DP
10-208 SKT 1/4DR 6PT 1/4 DP 10-935 HDL SPD 1/4DR 15-3/4 11-514 SKT 3/8DR UNV 12PT 7/16 11-882 SKT 3/8DR TRX BIT T40 12-330 SKT 1/2DR 12PT 15/16 DP
10-209 SKT 1/4DR 6PT 9/32 DP 10-938 HDL T 1/4DR 4-1/2 11-516 SKT 3/8DR UNV 12PT 1/2 11-884 SKT 3/8DR TRX BIT T45 12-332 SKT 1/2DR 12PT 1 DP
10-210 SKT 1/4DR 6PT 5/16 DP 10-943 HDL SPIN 1/4DR 6 11-518 SKT 3/8DR UNV 12PT 9/16 11-886 SKT 3/8DR TRX BIT T50 12-334 SKT 1/2DR 12PT 1-1/16 DP
10-211 SKT 1/4DR 6PT 11/32 DP 10-945 RAT SPIN 1/4DR 11-520 SKT 3/8DR UNV 12PT 5/8 11-915 RAT 3/8DR RH 7-1/2 12-336 SKT 1/2DR 12PT 1-1/8 DP
10-212 SKT 1/4DR 6PT 3/8 DP 10-947 UNV JNT 1/4DR 11-522 SKT 3/8DR UNV 12PT 11/16 11-918 HDL FLX 3/8DR 8-1/2 12-340 SKT 1/2DR 12PT 1-1/4 DP
10-214 SKT 1/4DR 6PT 7/16 DP 10-972 RAT 1/4DR 5-9/32 REPL 10-903 11-524 SKT 3/8DR UNV 12PT 3/4 11-922 EXTEN 3/8DR 3 12-516 SKT 1/2DR UNV 12PT 1/2
10-216 SKT 1/4DR 6PT 1/2 DP 67-460 10" LOCKING PLIERS 11-708 SKT 3/8DR HEX BIT 1/8 11-923 EXTEN 3/8DR 6 12-518 SKT 1/2DR UNV 12PT 9/16
10-218 SKT 1/4DR 6PT 9/16 DP 11-108 SKT 3/8DR 12PT 1/4 11-710 SKT 3/8DR HEX BIT 5/32 11-927 EXTEN 3/8DR 12 12-520 SKT 1/2DR UNV 12PT 5/8
10-408 SKT 1/4DR 4PT 1/4 11-110 SKT 3/8DR 12PT 5/16 11-711 SKT 3/8DR HEX BIT 3/16 11-928 EXTEN 3/8DR 20 12-522 SKT 1/2DR UNV 12PT 11/16
10-410 SKT 1/4DR 8PT 5/16 11-112 SKT 3/8DR 12PT 3/8 11-712 SKT 3/8DR HEX BIT 7/32 11-929 EXTEN FLX 3/8DR 7-1/4 12-524 SKT 1/2DR UNV 12PT 3/4
10-412 SKT 1/4DR 8PT 3/8 11-114 SKT 3/8DR 12PT 7/16 11-713 SKT 3/8DR HEX BIT 1/4 11-931 ADP 3/8DR LCK 2-1/8 12-713 SKT 1/2DR HEX BIT 1/4
10-705 SKT 1/4 DR HEX BIT 5/64 11-116 SKT 3/8DR 12PT 1/2 11-714 SKT 3/8DR HEX BIT 5/16 11-935 HDL SPD 3/8DR 16-1/2 12-714 SKT 1/2DR HEX BIT 5/16
10-706 SKT 1/4 DR HEX BIT 3/32 11-118 SKT 3/8DR 12PT 9/16 11-715 SKT 3/8DR HEX BIT 3/8 11-938 HDL T 3/8DR 8 12-715 SKT 1/2DR HEX BIT 3/8
10-707 SKT 1/4 DR HEX BIT 7/64 11-120 SKT 3/8DR 12PT 5/8 11-802 SKT 3/8DR SLT BIT 1/4 11-943 HDL SPIN 3/8DR 6 12-716 SKT 1/2DR HEX BIT 7/16
10-708 SKT 1/4 DR HEX BIT 1/8 11-122 SKT 3/8DR 12PT 11/16 11-822 SKT 3/8DR PHLP BIT #2 11-947 UNV JNT 3/8DR 12-717 SKT 1/2DR HEX BIT 1/2
10-709 SKT 1/4 DR HEX BIT 9/64 11-124 SKT 3/8DR 12PT 3/4 11-825 SKT 3/8DR PHLP BIT #3 11-951 ADP 3/8DR 3/8FX1/4M 12-718 SKT 1/2DR HEX BIT 9/16
10-710 SKT 1/4 DR HEX BIT 5/32 11-126 SKT 3/8DR 12PT 13/16 11-828 SKT 3/8DR PHLP BIT #4 11-972 RAT 3/8DR 7-3/8 REPL 11-903 12-719 SKT 1/2DR HEX BIT 5/8
10-711 SKT 1/4 DR HEX BIT 3/16 11-128 SKT 3/8DR 12PT 7/8 11-842 WR 3/8DR CRFT FLR NUT 5/8 11-973 RAT 3/8DR 10-1/2 REPL 11-904 12-840 WR 1/2DR CRFT FLR NUT 1-1/8
10-712 SKT 1/4 DR HEX BIT 7/32 11-130 SKT 3/8DR 12PT 15/16 11-843 WR 3/8DR CRFT FLR NUT 11/16 12-112 SKT 1/2DR 12PT 3/8 12-841 WR 1/2DR CRFT FLR NUT 1-3/16
10-713 SKT 1/4 DR HEX BIT 1/4 11-132 SKT 3/8DR 12PT 1 11-844 WR 3/8DR CRFT FLR NUT 3/4 12-114 SKT 1/2DR 12PT 7/16 12-842 WR 1/2DR CRFT FLR NUT 1-1/4
10-714 SKT 1/4 DR HEX BIT 5/16 11-308 SKT 3/8DR 12PT 1/4 DP 11-845 WR 3/8DR CRFT FLR NUT 13/16 12-116 SKT 1/2DR 12PT 1/2 12-843 WR 1/2DR CRFT FLR NUT 1-5/16
10-801 SKT 1/4DR SLT BIT 3/16 11-310 SKT 3/8DR 12PT 5/16 DP 11-846 WR 3/8DR CRFT FLR NUT 7/8 12-118 SKT 1/2DR 12PT 9/16 12-844 WR 1/2DR CRFT FLR NUT 1-3/8
10-802 SKT 1/4DR SLT BIT 1/4 11-312 SKT 3/8DR 12PT 3/8 DP 11-847 WR 3/8DR CRFT FLR NUT 15/16 12-120 SKT 1/2DR 12PT 5/8 Continued . . .

A-3
 A
Master Set Contents
Set 15-006 761 Pc. Master Set Cont.
12-845 WR 1/2DR CRFT FLR NUT 1-7/16 20-226 SKT IMP 1/2DR 6PT 13/16 DP 27-511 WR GEARED BOX 12PT 7/16 FP 38-316 SKT 3/8DR 12PT 16MM DP 52-221 WR COMB 12PT LNG 21MM
12-846 WR 1/2DR CRFT FLR NUT 1-1/2 20-228 SKT IMP 1/2DR 6PT 7/8 DP 27-512 WR GEARED BOX 12PT 1/2 FP 38-317 SKT 3/8DR 12PT 17MM DP 53-016 WR OE 6X7MM FP
12-847 WR 1/2DR CRFT FLR NUT 1-9/16 20-230 SKT IMP 1/2DR 6PT 15/16 DP 27-513 WR GEARED BOX 12PT 9/16 FP 38-318 SKT 3/8DR 12PT 18MM DP 53-022 WR OE 8X9MM FP
12-848 WR 1/2DR CRFT FLR NUT 1-5/8 25-004 WR COMB 6PT SHT 1/8 FP 27-514 WR GEARED BOX 12PT 5/8 FP 38-319 SKT 3/8DR 12PT 19MM DP 53-034 WR OE 10X11MM FP
12-849 WR 1/2DR CRFT FLR NUT 25-005 WR COMB 6PT SHT 5/32 FP 27-515 WR GEARED BOX 12PT 11/16 FP 38-320 SKT 3/8DR 12PT 20MM DP 53-052 WR OE 12X13MM FP
1-11/16 25-006 WR COMB 6PT SHT 3/16 FP 27-516 WR GEARED BOX 12PT 3/4 FP 38-321 SKT 3/8DR 12PT 21MM DP 53-067 WR OE 14X15MM FP
12-850 WR 1/2DR CRFT FLR NUT 1-3/4 25-008 WR COMB 6PT SHT 1/4 FP 27-812 WR ANG OE 3/8 15&60D FP 38-322 SKT 3/8DR 12PT 22MM DP 53-082 WR OE 16X17MM FP
12-851 WR 1/2DR CRFT FLR NUT 25-009 WR COMB 6PT SHT 9/32 FP 27-814 WR ANG OE 7/16 15&60D FP 38-323 SKT 3/8DR 12PT 23MM DP 53-096 WR OE 18X19MM FP
1-13/16 25-010 WR COMB 6PT SHT 5/16 FP 27-816 WR ANG OE 1/2 15&60D FP 38-707 SKT 3/8DR HEX BIT 4MM 53-115 WR OE 20X22MM FP
12-852 WR 1/2DR CRFT FLR NUT 1-7/8 25-011 WR COMB 6PT SHT 11/32 FP 27-818 WR ANG OE 9/16 15&60D FP 38-709 SKT 3/8DR HEX BIT 5MM 53-119 WR OE 21X23MM FP
12-853 WR 1/2DR CRFT FLR NUT 25-012 WR COMB 6PT SHT 3/8 FP 27-820 WR ANG OE 5/8 15&60D FP 38-711 SKT 3/8DR HEX BIT 6MM 53-142 WR OE 24X26MM FP
1-15/16 25-108 WR COMB 12PT SHT 1/4 FP 27-822 WR ANG OE 11/16 15&60D FP 38-712 SKT 3/8DR HEX BIT 7MM 54-322 WR BX LNG 12PT 8X9MM FP
12-854 WR 1/2DR CRFT FLR NUT 2 25-110 WR COMB 12PT SHT 5/16 FP 27-824 WR ANG OE 3/4 15&60D FP 38-713 SKT 3/8DR HEX BIT 8MM 54-334 WR BX LNG 12PT 10X11MM FP
12-878 SKT 1/2DR TRX BIT T27 25-112 WR COMB 12PT SHT 3/8 FP 27-826 WR ANG OE 13/16 15&60D FP 38-714 SKT 3/8DR HEX BIT 9MM 54-352 WR BX LNG 12PT 12X13MM FP
12-880 SKT 1/2DR TRX BIT T30 25-114 WR COMB 12PT SHT 7/16 FP 27-828 WR ANG OE 7/8 15&60D FP 38-715 SKT 3/8DR HEX BIT 10MM 54-367 WR BX LNG 12PT 14X15MM FP
12-882 SKT 1/2DR TRX BIT T40 25-116 WR COMB 12PT SHT 1/2 FP 27-830 WR ANG OE 15/16 15&60D FP 38-850 WR 3/8DR CRFT 10 MM 54-385 WR BX LNG 12PT 16X18MM FP
12-884 SKT 1/2DR TRX BIT T45 25-118 WR COMB 12PT SHT 9/16 FP 27-832 WR ANG OE 1 15&60D FP 38-851 WR 3/8DR CRFT 11 MM 54-391 WR BX LNG 12PT 17X19MM FP
12-886 SKT 1/2DR TRX BIT T50 25-120 WR COMB 12PT SHT 5/8 FP 27-834 WR ANG OE 1-1/16 15&60D FP 38-852 WR 3/8DR CRFT 12 MM 54-415 WR BX LNG 12PT 20X22MM FP
12-888 SKT 1/2DR TRX BIT T55 25-122 WR COMB 12PT SHT 11/16 FP 27-836 WR ANG OE 1-1/8 15&60D FP 38-853 WR 3/8DR CRFT 13 MM 54-419 WR BX LNG 12PT 21X23MM FP
12-892 SKT 1/2DR DRAG LNK 7/64 25-124 WR COMB 12PT SHT 3/4 FP 27-840 WR ANG OE 1-1/4 15&60D FP 38-854 WR 3/8DR CRFT 14 MM 54-445 WR BX LNG 12PT 24X27MM FP
12-915 RAT 1/2DR RH 10-1/2 25-126 WR COMB 12PT SHT 13/16 FP 27-903 WR ANG OE 13/64 MDGT 38-855 WR 3/8DR CRFT 15 MM 54-510 WR GEARED BOX 12PT 10MM FP
12-918 HDL FLX 1/2DR 17 25-128 WR COMB 12PT SHT 7/8 FP 15&75D FP 38-856 WR 3/8DR CRFT 16 MM 54-511 WR GEARED BOX 12PT 11MM FP
12-923 EXTEN 1/2DR 5 25-130 WR COMB 12PT SHT 15/16 FP 27-904 WR ANG OE 15/64 MDGT 38-857 WR 3/8DR CRFT 17 MM 54-512 WR GEARED BOX 12PT 12MM FP
12-924 EXTEN 1/2DR 10 25-132 WR COMB 12PT SHT 1 FP 15&75D FP 38-858 WR 3/8DR CRFT 18 MM 54-513 WR GEARED BOX 12PT 13MM FP
12-927 EXTEN 1/2DR 20 25-162 WR COMB 12PT X SHT 3/8 FP 27-907 WR ANG OE 7/32 MDGT 38-859 WR 3/8DR CRFT 19 MM 54-514 WR GEARED BOX 12PT 14MM FP
12-945 RAT SPIN 1/2DR 25-164 WR COMB 12PT X SHT 7/16 FP 15&75D FP 38-861 WR 3/8DR CRFT 21 MM 54-515 WR GEARED BOX 12PT 15MM FP
12-948 STUD REMOV 1/2DR 25-166 WR COMB 12PT X SHT 1/2 FP 27-908 WR ANG OE 1/4 MDGT 15&75D FP 38-862 WR 3/8DR CRFT 22 MM 54-516 WR GEARED BOX 12PT 16MM FP
12-972 RAT 1/2DR 10-1/2 REPL 12-903 25-168 WR COMB 12PT X SHT 9/16 FP 27-909 WR ANG OE 9/32 MDGT 39-110 SKT 1/2DR 12PT 10MM 54-517 WR GEARED BOX 12PT 17MM FP
12-974 RAT 1/2DR FLX 14-1/4 25-170 WR COMB 12PT X SHT 5/8 FP 15&75D FP 39-111 SKT 1/2DR 12PT 11MM 54-518 WR GEARED BOX 12PT 18MM FP
13-128 SKT 3/4DR 12PT 7/8 25-172 WR COMB 12PT X SHT 11/16 FP 27-910 WR ANG OE 5/16 MDGT 39-112 SKT 1/2DR 12PT 12MM 54-519 WR GEARED BOX 12PT 19MM FP

Master Set Contents

13-130 SKT 3/4DR 12PT 15/16 25-174 WR COMB 12PT X SHT 3/4 FP 15&75D FP 39-113 SKT 1/2DR 12PT 13MM 55-310 WR RAT FLR NUT 12PT 10MM
13-132 SKT 3/4DR 12PT 1 25-208 WR COMB 12PT LNG 1/4 FP 27-911 WR ANG OE 11/32 MDGT 39-114 SKT 1/2DR 12PT 14MM 55-311 WR RAT FLR NUT 12PT 11MM
13-134 SKT 3/4DR 12PT 1-1/16 25-210 WR COMB 12PT LNG 5/16 FP 15&75D FP 39-115 SKT 1/2DR 12PT 15MM 55-312 WR RAT FLR NUT 12PT 12MM
13-136 SKT 3/4DR 12PT 1-1/8 25-212 WR COMB 12PT LNG 3/8 FP 27-912 WR ANG OE 3/8 MDGT 15&75D 39-116 SKT 1/2DR 12PT 16MM 55-313 WR RAT FLR NUT 12PT 13MM
13-138 SKT 3/4DR 12PT 1-3/16 25-214 WR COMB 12PT LNG 7/16 FP FP 39-117 SKT 1/2DR 12PT 17MM 55-314 WR RAT FLR NUT 12PT 14MM
13-140 SKT 3/4DR 12PT 1-1/4 25-216 WR COMB 12PT LNG 1/2 FP 28-130 WR FLR NUT 6PT 3/8X7/16 FP 39-118 SKT 1/2DR 12PT 18MM 55-315 WR RAT FLR NUT 12PT 15MM
13-142 SKT 3/4DR 12PT 1-5/16 25-218 WR COMB 12PT LNG 9/16 FP 28-135 WR FLR NUT 6PT 1/2X9/16 FP 39-119 SKT 1/2DR 12PT 19MM 55-316 WR RAT FLR NUT 12PT 16MM
13-144 SKT 3/4DR 12PT 1-3/8 25-220 WR COMB 12PT LNG 5/8 FP 28-140 WR FLR NUT 6PT 5/8X11/16 FP 39-120 SKT 1/2DR 12PT 20MM 55-317 WR RAT FLR NUT 12PT 17MM
13-146 SKT 3/4DR 12PT 1-7/16 25-222 WR COMB 12 PT LNG 11/16 28-145 WR FLR NUT 12PT 3/4X1 FP 39-121 SKT 1/2DR 12PT 21MM 55-318 WR RAT FLR NUT 12PT 18MM
13-148 SKT 3/4DR 12PT 1-1/2 25-224 WR COMB 12PT LNG 3/4 FP 28-150 WR FLR NUT 12PT 7/8X1-1/8 FP 39-122 SKT 1/2DR 12PT 22MM 55-319 WR RAT FLR NUT 12PT 19MM
13-150 SKT 3/4DR 12PT 1-9/16 25-226 WR COMB 12PT LNG 13/16 FP 28-406 WR ADJ 6 39-123 SKT 1/2DR 12PT 23MM 56134 11 PC T-HANDLE HEX KEY SET
13-152 SKT 3/4DR 12PT 1-5/8 25-228 WR COMB 12PT LNG 7/8 FP 28-408 WR ADJ 8 39-124 SKT 1/2DR 12PT 24MM 56184 11 PC SCRDR HEX KEY SET
13-154 SKT 3/4DR 12PT 1-11/16 25-230 WR COMB 12PT LNG 15/16 FP 28-410 WR ADJ 10 39-125 SKT 1/2DR 12PT 25MM 56188 8 PC MET SCRDR HEX KEY SET
13-156 SKT 3/4DR 12PT 1-3/4 25-232 WR COMB 12PT LNG 1 FP 28-412 WR ADJ 12 39-126 SKT 1/2DR 12PT 26MM 56192 22 PC BALL PLUS SET
13-158 SKT 3/4DR 12PT 1-13/16 25-234 WR COMB 12PT LNG 1-1/16 FP 28-418 WR ADJ 18 39-127 SKT 1/2DR 12PT 27MM 64-086 WR TRQ 1/2DR 25-250 FT/LB
13-160 SKT 3/4DR 12PT 1-7/8 25-236 WR COMB 12PT LNG 1-1/8 FP 37-004 SKT 1/4DR 6PT 4MM 39-128 SKT 1/2DR 12PT 28MM 66-150 SCRDR PHLP #2X1-1/2
13-164 SKT 3/4DR 12PT 2 25-238 WR COMB 12 PT 1-3/16 37-005 SKT 1/4DR 6PT 5MM 39-129 SKT 1/2DR 12PT 29MM 66-152 SCRDR PHLP #0X2-1/2
13-168 SKT 3/4DR 12PT 2-1/8 25-240 WR COMB 12PT LNG 1-1/4 FP 37-006 SKT 1/4DR 6PT 6MM 39-130 SKT 1/2DR 12PT 30MM 66-153 SCRDR PHLP #1X3
13-170 SKT 3/4DR 12PT 2-3/16 25-242 WR COMB 12PT LNG 1-5/16 37-007 SKT 1/4DR 6PT 7MM 39-132 SKT 1/2DR 12PT 32MM 66-155 SCRDR PHLP #1X6
13-172 SKT 3/4DR 12PT 2-1/4 25-244 WR COMB 12PT LNG 1-3/8 37-008 SKT 1/4DR 6PT 8MM 39-136 SKT 1/2DR 12PT 36MM 66-156 SCRDR PHLP #2X4
13-176 SKT 3/4DR 12PT 2-3/8 25-246 WR COMB 12PT LNG 1-7/16 37-009 SKT 1/4DR 6PT 9MM 39-310 SKT 1/2DR 12PT 10MM DP 66-158 SCRDR PHLP #2X8
13-918 HDL FLX 3/4DR 22 25-248 WR COMB 12PT LNG 1-1/2 37-010 SKT 1/4DR 6PT 10MM 39-311 SKT 1/2DR 12PT 11MM DP 66-161 SCRDR PHLP #3X6
13-922 EXTEN 3/4DR 5 25-252 WR COMB 12PT LNG 1-5/8 37-011 SKT 1/4DR 6PT 11MM 39-312 SKT 1/2DR 12PT 12MM DP 66-164 SCRDR PHLP #4X8
13-923 EXTEN 3/4DR 8 25-412 WR COMB 12PT XL 3/8 FP 37-012 SKT 1/4DR 6PT 12MM 39-313 SKT 1/2DR 12PT 13MM DP 66-203 SCRDR SLT 3/16X4 SQ
13-925 EXTEN 3/4DR 16 25-414 WR COMB 12PT XL 7/16 FP 37-013 SKT 1/4DR 6PT 13MM 39-314 SKT 1/2DR 12PT 14MM DP 66-208 SCRDR SLT 1/4X4 SQ
13-938 HDL T 3/4DR 17-1/2 25-416 WR COMB 12PT XL 1/2 FP 37-014 SKT 1/4DR 6PT 14MM 39-315 SKT 1/2DR 12PT 15MM DP 66-217 SCRDR SLT 5/16X6 SQ
13-947 UNV JNT 3/4DR 25-418 WR COMB 12PT XL 9/16 FP 37-083 SKT 1/4DR 6PT 5.5MM 39-316 SKT 1/2DR 12PT 16MM DP 66-220 SCRDR SLT 3/8X8 SQ
13-972 RAT 3/4DR 19 25-420 WR COMB 12PT XL 5/8 FP 37-703 SKT 1/4DR HEX BIT 2MM 39-317 SKT 1/2DR 12PT 17MM DP 66-226 SCRDR SLT 7/16X12 SQ
19-608 SKT IMP 3/8DR 6PT 1/4 25-422 WR COMB 12PT XL 11/16 FP 37-704 SKT 1/4DR HEX BIT 2.5MM 39-318 SKT 1/2DR 12PT 18MM DP 66-232 SCRDR SLT 1/4X1-1/2 SQ
19-610 SKT IMP 3/8DR 6PT 5/16 25-424 WR COMB 12PT XL 3/4 FP 37-705 SKT 1/4DR HEX BIT 3MM 39-319 SKT 1/2DR 12PT 19MM DP 66-253 SCRDR CAB 1/8X3
19-612 SKT IMP 3/8DR 6PT 3/8 25-426 WR COMB 12PT XL 13/16 FP 37-707 SKT 1/4DR HEX BIT 4MM 39-320 SKT 1/2DR 12PT 20MM DP 66-255 SCRDR CAB 1/8X4
19-614 SKT IMP 3/8DR 6PT 7/16 25-428 WR COMB 12PT XL 7/8 FP 37-709 SKT 1/4DR HEX BIT 5MM 39-321 SKT 1/2DR 12PT 21MM DP 66-259 SCRDR CAB 1/8X8
19-616 SKT IMP 3/8DR 6PT 1/2 25-430 WR COMB 12PT XL 15/16 FP 37-711 SKT 1/4DR HEX BIT 6MM 39-322 SKT 1/2DR 12PT 22MM DP 66-262 SCRDR CAB 3/16X4
19-618 SKT IMP 3/8DR 6PT 9/16 25-432 WR COMB 12PT XL 1 FP 38-106 SKT 3/8DR 12PT 6MM 39-323 SKT 1/2DR 12PT 23MM DP 66-268 SCRDR CAB 3/16X8
19-620 SKT IMP 3/8DR 6PT 5/8 25-508 WR COMB FLX HD 12PT 1/4 FP 38-107 SKT 3/8DR 12PT 7MM 39-324 SKT 1/2DR 12PT 24MM DP 66-806 NUT DR 3/16 HOLL SHFT
19-622 SKT IMP 3/8DR 6PT 11/16 25-510 WR COMB FLX HD 12PT 5/16 FP 38-108 SKT 3/8DR 12PT 8MM 39-325 SKT 1/2DR 12PT 25MM DP 66-807 NUT DR 7/32 HOLL SHFT
19-624 SKT IMP 3/8DR 6PT 3/4 25-512 WR COMB FLX HD 12PT 3/8 FP 38-109 SKT 3/8DR 12PT 9MM 39-326 SKT 1/2DR 12PT 26MM DP 66-808 NUT DR 1/4 HOLL SHFT
19-708 SKT IMP 3/8DR 6PT DP 1/4 25-514 WR COMB FLX HD 12PT 7/16 FP 38-110 SKT 3/8DR 12PT 10MM 39-327 SKT 1/2DR 12PT 27MM DP 66-809 NUT DR 9/32 HOLL SHFT
19-710 SKT IMP 3/8DR 6PT DP 5/16 25-516 WR COMB FLX HD 12PT 1/2 FP 38-111 SKT 3/8DR 12PT 11MM 39-328 SKT 1/2DR 12PT 28MM DP 66-810 NUT DR 5/16 HOLL SHFT
19-712 SKT IMP 3/8DR 6PT DP 3/8 25-518 WR COMB FLX HD 12PT 9/16 FP 38-112 SKT 3/8DR 12PT 12MM 39-329 SKT 1/2DR 12PT 29MM DP 66-811 NUT DR 11/32 HOLL SHFT
19-714 SKT IMP 3/8DR 6PT DP 7/16 25-520 WR COMB FLX HD 12PT 5/8 FP 38-113 SKT 3/8DR 12PT 13MM 39-330 SKT 1/2DR 12PT 30MM DP 66-812 NUT DR 3/8 HOLL SHFT
19-716 SKT IMP 3/8DR 6PT DP 1/2 25-522 WR COMB FLX HD 12PT 11/16 FP 38-114 SKT 3/8DR 12PT 14MM 39-332 SKT 1/2DR 12PT 32MM DP 66-814 NUT DR 7/16 HOLL SHFT
19-718 SKT IMP 3/8DR 6PT DP 9/16 25-524 WR COMB FLX HD 12PT 3/4 FP 38-115 SKT 3/8DR 12PT 15MM 39-711 SKT 1/2DR HEX BIT 6MM 66-816 NUT DR 1/2 HOLL SHFT
19-720 SKT IMP 3/8DR 6PT DP 5/8 25-526 WR COMB FLX HD 12PT 13/16 FP 38-116 SKT 3/8DR 12PT 16MM 39-713 SKT 1/2DR HEX BIT 8MM 66-818 NUT DR 9/16 HOLL SHFT
19-722 SKT IMP 3/8DR 6PT DP 11/16 25-528 WR COMB FLX HD 12PT 7/8 FP 38-117 SKT 3/8DR 12PT 17MM 39-715 SKT 1/2DR HEX BIT 10MM 66-820 NUT DR 5/8 HOLL SHFT
19-724 SKT IMP 3/8DR 6PT DP 3/4 26-022 WR OE 1/4X5/16 FP 38-118 SKT 3/8DR 12PT 18MM 39-717 SKT 1/2DR HEX BIT 12MM 66-924 SCR START SLT 5
20-016 SKT IMP 1/2DR 6PT 1/2 26-043 WR OE 3/8X7/16 FP 38-119 SKT 3/8DR 12PT 19MM 39-719 SKT 1/2DR HEX BIT 14MM 66-933 SCR START PHLP 5
20-018 SKT IMP 1/2DR 6PT 9/16 26-067 WR OE 1/2X9/16 FP 38-120 SKT 3/8DR 12PT 20MM 39-722 SKT 1/2DR HEX BIT 17MM 66-943 SCR START NUT 5
20-020 SKT IMP 1/2DR 6PT 5/8 26-094 WR OE 5/8X11/16 FP 38-121 SKT 3/8DR 12PT 21MM 52-207 WR COMB 12PT LNG 7MM 67-069 PLR LNMN 9-1/2 W/GRP
20-022 SKT IMP 1/2DR 6PT 11/16 26-121 WR OE 3/4X13/16 FP 38-122 SKT 3/8DR 12PT 22MM 52-208 WR COMB 12PT LNG 8MM 67-113 PLR DIAG CUT 8 HD W/GRP
20-024 SKT IMP 1/2DR 6PT 3/4 26-139 WR OE 7/8X15/16 FP 38-123 SKT 3/8DR 12PT 23MM 52-209 WR COMB 12PT LNG 9MM 67-161 PLR DIAG CUT 6-3/8 W/GRP
20-026 SKT IMP 1/2DR 6PT 13/16 26-163 WR OE 1X1-1/8 FP 38-126 SKT 3/8DR 12PT 26MM 52-210 WR COMB 12PT LNG 10MM 67-255 PLR CHN NSE 5-3/8 W/GRP
20-028 SKT IMP 1/2DR 6PT 7/8 26-169 WR OE 1-1/16X1-1/4 FP 38-306 SKT 3/8DR 12PT 6MM DP 52-211 WR COMB 12PT LNG 11MM 67-307 PLR CHN NSE 7-3/4 SD CUT
20-030 SKT IMP 1/2DR 6PT 15/16 26-187 WR OE 1-5/16X1-1/2 FP 38-307 SKT 3/8DR 12PT 7MM DP 52-212 WR COMB 12PT LNG 12MM W/GRP
20-032 SKT IMP 1/2DR 6PT 1 26-190 WR OE 1-3/8X1-7/16 FP 38-308 SKT 3/8DR 12PT 8MM DP 52-213 WR COMB 12PT LNG 13MM 67-357 PLR NDL NSE 5-7/16 W/GRP
20-034 SKT IMP 1/2DR 6PT 1-1/16 27-343 WR BX 12PT LNG 3/8X7/16 FP 38-309 SKT 3/8DR 12PT 9MM DP 52-214 WR COMB 12PT LNG 14MM 67-401 PLR NDL NSE 5-7/8 CURV
20-036 SKT IMP 1/2DR 6PT 1-1/8 27-367 WR BX 12PT LNG 1/2X9/16 FP 38-310 SKT 3/8DR 12PT 10MM DP 52-215 WR COMB 12PT LNG 15MM W/GRP
20-216 SKT IMP 1/2DR 6PT 1/2 DP 27-394 WR BX 12PT LNG 5/8X11/16 FP 38-311 SKT 3/8DR 12PT 11MM DP 52-216 WR COMB 12PT LNG 16MM 67-503 PLR DKBL 8 W/GRP
20-218 SKT IMP 1/2DR 6PT 9/16 DP 27-424 WR BX 12PT LNG 3/4X7/8 FP 38-312 SKT 3/8DR 12PT 12MM DP 52-217 WR COMB 12PT LNG 17MM 67-535 PLR END CUT 7-3/8 W/GRP
20-220 SKT IMP 1/2DR 6PT 5/8 DP 27-451 WR BX 12PT LNG 15/16X1 FP 38-313 SKT 3/8DR 12PT 13MM DP 52-218 WR COMB 12PT LNG 18MM 67-667 PLR SLP JNT 6-1/2 W/GRP
20-222 SKT IMP 1/2DR 6PT 11/16 DP 27-466 WR BX 12PT LNG 1-1/16X1-1/8 FP 38-314 SKT 3/8DR 12PT 14MM DP 52-219 WR COMB 12PT LNG 19MM 67-671 PLR SLP JNT 10 W/GRP
20-224 SKT IMP 1/2DR 6PT 3/4 DP 27-510 WR GEARED BOX 12PT 3/8 FP 38-315 SKT 3/8DR 12PT 15MM DP 52-220 WR COMB 12PT LNG 20MM Continued . . .

A-4
 A
Master Set Contents
Set 15-006 761 Pc. Master Set Cont.
67-717 PLR TNG&GRV 5 W/GRP 69-490 RBR MALL 32OZ 16-1/2 70-131 PNCH PIN 1/4 TIP 70-303 CHSL CLD 5/16 TIP 70-865 HCKS FLT FRM
67-779 PLR TNG&GRV 10 W/GRP 69-515 HMR BRS 2.5LB W/GRP 70-155 PNCH START 3/32 TIP 70-305 CHSL CLD 3/8 TIP 70-925 TELESCP MIRR 2-1/4 DIA
67-783 PLR TNG&GRV 16 W/GRP 69-530 HMR DEAD BLOW STD 10OZ 70-157 PNCH START 1/8 TIP 70-309 CHSL CLD 1/2 TIP 70-933 RETR TL MAG TELESCP
67-830 PLR IGNITION 5-1/4 W/GRP 69-532 HMR DEAD BLOW STD 21OZ 70-161 PNCH START 3/16 TIP 70-311 CHSL CLD 5/8 TIP 70-970 SCREW EXTRACTOR SET
68-079 SET RET RNG PLR 69-543 HMR DEAD BLOW SLIMLINE 21OZ 70-163 PNCH START 7/32 TIP 70-313 CHSL CLD 3/4 TIP 73-010 WR PIPE 10 HD
68-241 SNIPS MINI 6-1/2 69-605 HMR DRL 3LB WD HDL 70-165 PNCH START 1/4 TIP 70-315 CHSL CLD 7/8 TIP 73-014 WR PIPE 14 HD
68-255 SNIPS AVN 10 STRT 67-436 6" LOCKING PLIERS 70-189 PNCH DRFT 1/8 TIP 70-317 CHSL CLD 1 TIP 73-018 WR PIPE 18 HD
68-275 SNIPS STRT 12-3/4 70-000 PUNCH & CHISEL HOLDER 70-193 PNCH DRFT 3/16 TIP 70-319 CHSL CLD 1-1/8 TIP 73-295 CHAIN 3/8 TO 4
68-310 KNFE UTIL RETRACT 70-103 PNCH PIN 3/32 TIP 70-197 PNCH DRFT 1/4 TIP 70-503 ALIGNING BAR PINCH 5/8X16 78-406 C-CL THRT DP 6 STD SCREW
68-445 TP MEAS 1X25 LCK AUTO 70-105 PNCH PIN 1/8 TIP 70-235 PNCH CNTR 3/8 70-505 ALIGNING BAR PINCH 3/4X24 BLK (2)
69-444 HMR BLL PN 8OZ WD HDL 70-107 PNCH PIN 5/32 TIP 70-239 PNCH CNTR 1/2 70-519 CHSL BAR ROLL1/2X15 67-407 7" LOCKING PLIERS
69-448 HMR BLL PN 1LB WD HDL 70-109 PNCH PIN 3/16 TIP 70-255 PNCH PRCK 3/8 70-521 CHSL BAR ROLL 5/8X18
69-452 HMR BLL PN 2LB WD HDL 70-129 PNCH PIN 7/32 TIP 70-301 CHSL CLD 1/4 TIP 70-793 SET FEELER GAUGE 25 BLADE

Set 15-011 623 Pc. Master Set - Tools Only

10-006 SKT 1/4DR 6PT 3/16 11-330 SKT 3/8DR 12PT 15/16 DP 12-322 SKT 1/2DR 12PT 11/16 DP 25-008 WR COMB 6PT SHT 1/4 FP 27-914 WR ANG OE 7/16 MDGT 15&75D FP
10-007 SKT 1/4DR 6PT 7/32 11-332 SKT 3/8DR 12PT 1 DP 12-324 SKT 1/2DR 12PT 3/4 DP 25-009 WR COMB 6PT SHT 9/32 FP 27-916 WR ANG OE 1/2 MDGT 15&75D FP
10-008 SKT 1/4DR 6PT 1/4 11-408 SKT 3/8DR 8PT 1/4 12-326 SKT 1/2DR 12PT 13/16 DP 25-010 WR COMB 6PT SHT 5/16 FP 28-212 WR COMB FLR NUT 6PT 3/8 FP
10-009 SKT 1/4DR 6PT 9/32 11-410 SKT 3/8DR 8PT 5/16 12-328 SKT 1/2DR 12PT 7/8 DP 25-011 WR COMB 6PT SHT 11/32 FP 28-214 WR COMB FLR NUT 6PT 7/16 FP
10-010 SKT 1/4DR 6PT 5/16 11-412 SKT 3/8DR 8PT 3/8 12-330 SKT 1/2DR 12PT 15/16 DP 25-012 WR COMB 6PT SHT 3/8 FP 28-216 WR COMB FLR NUT 6PT 1/2 FP
10-011 SKT 1/4DR 6PT 11/32 11-414 SKT 3/8DR 8PT 7/16 12-332 SKT 1/2DR 12PT 1 DP 25-210 WR COMB 12PT LNG 5/16 FP 28-218 WR COMB FLR NUT 6PT 9/16 FP
10-012 SKT 1/4DR 6PT 3/8 11-416 SKT 3/8DR 8PT 1/2 12-334 SKT 1/2DR 12PT 1-1/16 DP 25-212 WR COMB 12PT LNG 3/8 FP 28-220 WR COMB FLR NUT 6PT 5/8 FP
10-014 SKT 1/4DR 6PT 7/16 11-512 SKT 3/8DR UNV 12PT 3/8 12-336 SKT 1/2DR 12PT 1-1/8 DP 25-214 WR COMB 12PT LNG 7/16 FP 28-222 WR COMB FLR NUT 6PT 11/16 FP
10-016 SKT 1/4DR 6PT 1/2 11-514 SKT 3/8DR UNV 12PT 7/16 12-340 SKT 1/2DR 12PT 1-1/4 DP 25-216 WR COMB 12PT LNG 1/2 FP 28-224 WR COMB FLR NUT 6PT 3/4 FP
10-018 SKT 1/4DR 6PT 9/16 11-516 SKT 3/8DR UNV 12PT 1/2 12-412 SKT 1/2DR 8PT 3/8 25-218 WR COMB 12PT LNG 9/16 FP 28-312 WR RAT FLR NUT 12PT 3/8
10-206 SKT 1/4DR 6PT 3/16 DP 11-518 SKT 3/8DR UNV 12PT 9/16 12-414 SKT 1/2DR 8PT 7/16 25-220 WR COMB 12PT LNG 5/8 FP 28-314 WR RAT FLR NUT 12PT 7/16
10-207 SKT 1/4DR 6PT 7/32 DP 11-520 SKT 3/8DR UNV 12PT 5/8 12-416 SKT 1/2DR 8PT 1/2 25-222 WR COMB 12PT LNG 11/16 FP 28-316 WR RAT FLR NUT 12PT 1/2
Master Set Contents

10-208 SKT 1/4DR 6PT 1/4 DP 11-522 SKT 3/8DR UNV 12PT 11/16 12-418 SKT 1/2DR 8PT 9/16 25-224 WR COMB 12PT LNG 3/4 FP 28-318 WR RAT FLR NUT 12PT 9/16
10-209 SKT 1/4DR 6PT 9/32 DP 11-524 SKT 3/8DR UNV 12PT 3/4 12-420 SKT 1/2DR 8PT 5/8 25-226 WR COMB 12PT LNG 13/16 FP 28-320 WR RAT FLR NUT 12PT 5/8
10-210 SKT 1/4DR 6PT 5/16 DP 11-708 SKT 3/8DR HEX BIT 1/8 12-422 SKT 1/2DR 8PT 11/16 25-228 WR COMB 12PT LNG 7/8 FP 28-322 WR RAT FLR NUT 12PT 11/16
10-211 SKT 1/4DR 6PT 11/32 DP 11-710 SKT 3/8DR HEX BIT 5/32 12-424 SKT 1/2DR 8PT 3/4 25-230 WR COMB 12PT LNG 15/16 FP 28-324 WR RAT FLR NUT 12PT 3/4
10-212 SKT 1/4DR 6PT 3/8 DP 11-711 SKT 3/8DR HEX BIT 3/16 12-426 SKT 1/2DR 8PT 13/16 25-232 WR COMB 12PT LNG 1 FP 28-406 WR ADJ 6
10-214 SKT 1/4DR 6PT 7/16 DP 11-712 SKT 3/8DR HEX BIT 7/32 12-428 SKT 1/2DR 8PT 7/8 25-234 WR COMB 12PT LNG 1-1/16 FP 28-408 WR ADJ 8
10-216 SKT 1/4DR 6PT 1/2 DP 11-713 SKT 3/8DR HEX BIT 1/4 12-432 SKT 1/2DR 8PT 1 25-236 WR COMB 12PT LNG 1-1/8 FP 28-410 WR ADJ 10
10-218 SKT 1/4DR 6PT 9/16 DP 11-714 SKT 3/8DR HEX BIT 5/16 12-516 SKT 1/2DR UNV 12PT 1/2 25-240 WR COMB 12PT LNG 1-1/4 FP 28-412 WR ADJ 12
10-408 SKT 1/4DR 4PT 1/4 11-715 SKT 3/8DR HEX BIT 3/8 12-518 SKT 1/2DR UNV 12PT 9/16 25-242 WR COMB 12PT LNG 1-5/16 28-415 WR ADJ 15
10-410 SKT 1/4DR 8PT 5/16 11-802 SKT 3/8DR SLT BIT 1/4 12-520 SKT 1/2DR UNV 12PT 5/8 25-244 WR COMB 12PT LNG 1-3/8 3470 HOOK & PIN PULLER
10-412 SKT 1/4DR 8PT 3/8 11-822 SKT 3/8DR PHLP BIT #2 12-713 SKT 1/2DR HEX BIT 1/4 25-246 WR COMB 12PT LNG 1-7/16 37-004 SKT 1/4DR 6PT 4MM
10-704 SKT 1/4 DR HEX BIT 1/16 11-825 SKT 3/8DR PHLP BIT #3 12-714 SKT 1/2DR HEX BIT 5/16 25-248 WR COMB 12PT LNG 1-1/2 37-005 SKT 1/4DR 6PT 5MM
10-705 SKT 1/4 DR HEX BIT 5/64 11-828 SKT 3/8DR PHLP BIT #4 12-715 SKT 1/2DR HEX BIT 3/8 25-512 WR COMB FLX HD 12PT 3/8 FP 37-006 SKT 1/4DR 6PT 6MM
10-706 SKT 1/4 DR HEX BIT 3/32 11-850 WR 3/8DR CRFT 3/8 12-716 SKT 1/2DR HEX BIT 7/16 25-514 WR COMB FLX HD 12PT 7/16 FP 37-007 SKT 1/4DR 6PT 7MM
10-707 SKT 1/4 DR HEX BIT 7/64 11-851 WR 3/8DR CRFT 7/16 12-717 SKT 1/2DR HEX BIT 1/2 25-516 WR COMB FLX HD 12PT 1/2 FP 37-008 SKT 1/4DR 6PT 8MM
10-708 SKT 1/4 DR HEX BIT 1/8 11-852 WR 3/8DR CRFT 1/2 12-718 SKT 1/2DR HEX BIT 9/16 25-518 WR COMB FLX HD 12PT 9/16 FP 37-009 SKT 1/4DR 6PT 9MM
10-709 SKT 1/4 DR HEX BIT 9/64 11-853 WR 3/8DR CRFT 9/16 12-719 SKT 1/2DR HEX BIT 5/8 25-520 WR COMB FLX HD 12PT 5/8 FP 37-010 SKT 1/4DR 6PT 10MM
10-710 SKT 1/4 DR HEX BIT 5/32 11-854 WR 3/8DR CRFT 5/8 12-892 SKT 1/2DR DRAG LNK 7/64 25-522 WR COMB FLX HD 12PT 11/16 FP 37-011 SKT 1/4DR 6PT 11MM
10-711 SKT 1/4 DR HEX BIT 3/16 11-855 WR 3/8DR CRFT 11/16 12-893 SKT 1/2DR DRAG LNK 3/32 25-524 WR COMB FLX HD 12PT 3/4 FP 37-012 SKT 1/4DR 6PT 12MM
10-712 SKT 1/4 DR HEX BIT 7/32 11-856 WR 3/8DR CRFT 3/4 12-918 HDL FLX 1/2DR 17 26-022 WR OE 1/4X5/16 FP 37-013 SKT 1/4DR 6PT 13MM
10-713 SKT 1/4 DR HEX BIT 1/4 11-857 WR 3/8DR CRFT 13/16 12-921 EXTEN 1/2DR 2-1/2 26-034 WR OE 5/16X3/8 FP 37-014 SKT 1/4DR 6PT 14MM
10-714 SKT 1/4 DR HEX BIT 5/16 11-858 WR 3/8DR CRFT 7/8 12-923 EXTEN 1/2DR 5 26-058 WR OE 7/16X1/2 FP 37-083 SKT 1/4DR 6PT 5.5MM
10-801 SKT 1/4DR SLT BIT 3/16 11-874 SKT 3/8DR TRX BIT T20 12-924 EXTEN 1/2DR 10 26-067 WR OE 1/2X9/16 FP 37-204 SKT 1/4DR 6PT 4MM DP
10-802 SKT 1/4DR SLT BIT 1/4 11-876 SKT 3/8DR TRX BIT T25 12-935 HDL SPD 1/2DR 19 26-079 WR OE 9/16X5/8 FP 37-205 SKT 1/4DR 6PT 5MM DP
10-821 SKT 1/4DR PHLP BIT #1 11-878 SKT 3/8DR TRX BIT T27 12-938 HDL T 1/2DR 11 26-097 WR OE 5/8X3/4 FP 37-206 SKT 1/4DR 6PT 6MM DP
10-822 SKT 1/4DR PHLP BIT #2 11-880 SKT 3/8DR TRX BIT T30 12-944 ADP RAT 1/2DR 26-106 WR OE 11/16X3/4 FP 37-207 SKT 1/4DR 6PT 7MM DP
10-823 SKT 1/4DR PHLP BIT #3 11-882 SKT 3/8DR TRX BIT T40 12-947 UNV JNT 1/2DR 26-133 WR OE 13/16X7/8 FP 37-208 SKT 1/4DR 6PT 8MM DP
10-918 HDL FLX 1/4DR 5-3/4 11-884 SKT 3/8DR TRX BIT T45 12-972 RAT 1/2DR 10-1/2 REPL 12-903 26-151 WR OE 15/16X1 FP 37-209 SKT 1/4DR 6PT 9MM DP
10-921 EXTEN 1/4DR 2 11-918 HDL FLX 3/8DR 8-1/2 12-973 RAT 1/2DR 15 REPL 12-904 26-166 WR OE 1-1/16X1-1/8 FP 37-210 SKT 1/4DR 6PT 10MM DP
10-922 EXTEN 1/4DR 4 11-922 EXTEN 3/8DR 3 12-974 RAT 1/2DR FLX 14-1/4 26-643 WR BX 12PT LNG 3/8X7/16 FP 37-211 SKT 1/4DR 6PT 11MM DP
10-923 EXTEN 1/4DR 6 11-923 EXTEN 3/8DR 6 13-128 SKT 3/4DR 12PT 7/8 26-658 WR BX 12PT LNG 7/16X1/2 FP 37-212 SKT 1/4DR 6PT 12MM DP
10-929 EXTEN 1/4DR FLX 6 11-927 EXTEN 3/8DR 12 13-130 SKT 3/4DR 12PT 15/16 26-679 WR BX 12PT LNG 9/16X5/8 FP 37-213 SKT 1/4DR 6PT 13MM DP
10-935 HDL SPD 1/4DR 15-3/4 11-929 EXTEN FLX 3/8DR 7-1/4 13-132 SKT 3/4DR 12PT 1 26-706 WR BX 12PT LNG 11/16X3/4 FP 37-214 SKT 1/4DR 6PT 14MM DP
10-938 HDL T 1/4DR 4-1/2 11-935 HDL SPD 3/8DR 16-1/2 13-134 SKT 3/4DR 12PT 1-1/16 26-733 WR BX 12PT LNG 13/16X7/8 FP 37-283 SKT 1/4DR 6PT 5.5MM DP
10-943 HDL SPIN 1/4DR 6 11-938 HDL T 3/8DR 8 13-136 SKT 3/4DR 12PT 1-1/8 26-751 WR BX 12PT LNG 15/16X1 FP 37-703 SKT 1/4DR HEX BIT 2MM
10-947 UNV JNT 1/4DR 11-947 UNV JNT 3/8DR 13-138 SKT 3/4DR 12PT 1-3/16 26-766 WR BX 12PT LNG 1-1/16X1-1/8 FP 37-704 SKT 1/4DR HEX BIT 2.5MM
10-972 RAT 1/4DR 5-9/32 11-972 RAT 3/8DR 7-3/8 REPL 11-903 13-140 SKT 3/4DR 12PT 1-1/4 27-143 WR BX 12PT SHT 3/8X7/16 FP 37-705 SKT 1/4DR HEX BIT 3MM
67-410 10" LOCKING PLIERS 11-974 RAT 3/8DR FLX 9-1/2 13-142 SKT 3/4DR 12PT 1-5/16 27-167 WR BX 12PT SHT 1/2X9/16 FP 37-707 SKT 1/4DR HEX BIT 4MM
11-108 SKT 3/8DR 12PT 1/4 12-112 SKT 1/2DR 12PT 3/8 13-144 SKT 3/4DR 12PT 1-3/8 27-194 WR BX 12PT SHT 5/8X11/16 FP 37-709 SKT 1/4DR HEX BIT 5MM
11-110 SKT 3/8DR 12PT 5/16 12-114 SKT 1/2DR 12PT 7/16 13-146 SKT 3/4DR 12PT 1-7/16 27-206 WR BX 12PT SHT 11/16X3/4 FP 37-711 SKT 1/4DR HEX BIT 6MM
11-112 SKT 3/8DR 12PT 3/8 12-116 SKT 1/2DR 12PT 1/2 13-148 SKT 3/4DR 12PT 1-1/2 27-343 WR BX 12PT LNG 3/8X7/16 FP 38-108 SKT 3/8DR 12PT 8MM
11-114 SKT 3/8DR 12PT 7/16 12-118 SKT 1/2DR 12PT 9/16 13-150 SKT 3/4DR 12PT 1-9/16 27-367 WR BX 12PT LNG 1/2X9/16 FP 38-109 SKT 3/8DR 12PT 9MM
11-116 SKT 3/8DR 12PT 1/2 12-119 SKT 1/2DR 12PT 19/32 13-152 SKT 3/4DR 12PT 1-5/8 27-394 WR BX 12PT LNG 5/8X11/16 FP 38-110 SKT 3/8DR 12PT 10MM
11-118 SKT 3/8DR 12PT 9/16 12-120 SKT 1/2DR 12PT 5/8 13-154 SKT 3/4DR 12PT 1-11/16 27-424 WR BX 12PT LNG 3/4X7/8 FP 38-111 SKT 3/8DR 12PT 11MM
11-120 SKT 3/8DR 12PT 5/8 12-122 SKT 1/2DR 12PT 11/16 13-156 SKT 3/4DR 12PT 1-3/4 27-451 WR BX 12PT LNG 15/16X1 FP 38-112 SKT 3/8DR 12PT 12MM
11-122 SKT 3/8DR 12PT 11/16 12-124 SKT 1/2DR 12PT 3/4 13-158 SKT 3/4DR 12PT 1-13/16 27-466 WR BX 12PT LNG 1-1/16X1-1/8 FP 38-113 SKT 3/8DR 12PT 13MM
11-124 SKT 3/8DR 12PT 3/4 12-125 SKT 1/2DR 12PT 25/32 13-160 SKT 3/4DR 12PT 1-7/8 27-510 WR GEARED BOX 12PT 3/8 FP 38-114 SKT 3/8DR 12PT 14MM
11-126 SKT 3/8DR 12PT 13/16 12-126 SKT 1/2DR 12PT 13/16 13-164 SKT 3/4DR 12PT 2 27-511 WR GEARED BOX 12PT 7/16 FP 38-115 SKT 3/8DR 12PT 15MM
11-128 SKT 3/8DR 12PT 7/8 12-128 SKT 1/2DR 12PT 7/8 13-168 SKT 3/4DR 12PT 2-1/8 27-512 WR GEARED BOX 12PT 1/2 FP 38-116 SKT 3/8DR 12PT 16MM
11-130 SKT 3/8DR 12PT 15/16 12-130 SKT 1/2DR 12PT 15/16 13-170 SKT 3/4DR 12PT 2-3/16 27-513 WR GEARED BOX 12PT 9/16 FP 38-117 SKT 3/8DR 12PT 17MM
11-132 SKT 3/8DR 12PT 1 12-132 SKT 1/2DR 12PT 1 13-172 SKT 3/4DR 12PT 2-1/4 27-514 WR GEARED BOX 12PT 5/8 FP 38-118 SKT 3/8DR 12PT 18MM
11-308 SKT 3/8DR 12PT 1/4 DP 12-134 SKT 1/2DR 12PT 1-1/16 13-176 SKT 3/4DR 12PT 2-3/8 27-515 WR GEARED BOX 12PT 11/16 FP 38-119 SKT 3/8DR 12PT 19MM
11-310 SKT 3/8DR 12PT 5/16 DP 12-136 SKT 1/2DR 12PT 1-1/8 13-918 HDL FLX 3/4DR 22 27-516 WR GEARED BOX 12PT 3/4 FP 38-308 SKT 3/8DR 12PT 8MM DP
11-312 SKT 3/8DR 12PT 3/8 DP 12-138 SKT 1/2DR 12PT 1-3/16 13-922 EXTEN 3/4DR 5 27-904 WR ANG OE 15/64 MDGT 38-309 SKT 3/8DR 12PT 9MM DP
11-314 SKT 3/8DR 12PT 7/16 DP 12-140 SKT 1/2DR 12PT 1-1/4 13-923 EXTEN 3/4DR 8 15&75D FP 38-310 SKT 3/8DR 12PT 10MM DP
11-316 SKT 3/8DR 12PT 1/2 DP 12-142 SKT 1/2DR 12PT 1-5/16 13-925 EXTEN 3/4DR 16 27-907 WR ANG OE 7/32 MDGT 15&75D FP 38-311 SKT 3/8DR 12PT 11MM DP
11-318 SKT 3/8DR 12PT 9/16 DP 12-144 SKT 1/2DR 12PT 1-3/8 13-938 HDL T 3/4DR 17-1/2 27-908 WR ANG OE 1/4 MDGT 15&75D FP 38-312 SKT 3/8DR 12PT 12MM DP
11-320 SKT 3/8DR 12PT 5/8 DP 12-146 SKT 1/2DR 12PT 1-7/16 13-947 UNV JNT 3/4DR 27-909 WR ANG OE 9/32 MDGT 15&75D FP 38-313 SKT 3/8DR 12PT 13MM DP
11-322 SKT 3/8DR 12PT 11/16 DP 12-148 SKT 1/2DR 12PT 1-1/2 13-972 RAT 3/4DR 19 27-910 WR ANG OE 5/16 MDGT 15&75D FP 38-314 SKT 3/8DR 12PT 14MM DP
11-324 SKT 3/8DR 12PT 3/4 DP 12-316 SKT 1/2DR 12PT 1/2 DP 25-004 WR COMB 6PT SHT 1/8 FP 27-911 WR ANG OE 11/32 MDGT 38-315 SKT 3/8DR 12PT 15MM DP
11-326 SKT 3/8DR 12PT 13/16 DP 12-318 SKT 1/2DR 12PT 9/16 DP 25-005 WR COMB 6PT SHT 5/32 FP 15&75D FP 38-316 SKT 3/8DR 12PT 16MM DP
11-328 SKT 3/8DR 12PT 7/8 DP 12-320 SKT 1/2DR 12PT 5/8 DP 25-006 WR COMB 6PT SHT 3/16 FP 27-912 WR ANG OE 3/8 MDGT 15&75D FP Continued . . .

A-5
 A
Master Set Contents
Set 15-011 623 Pc. Master Set Cont.
38-317 SKT 3/8DR 12PT 17MM DP 39-719 SKT 1/2DR HEX BIT 14MM 54-516 WR GEARED BOX 12PT 16MM FP 66-933 SCR START PHLP 5 70-129 PNCH PIN 7/32 TIP
38-318 SKT 3/8DR 12PT 18MM DP 39-722 SKT 1/2DR HEX BIT 17MM 54-517 WR GEARED BOX 12PT 17MM FP 67-067 PLR LNMN 8-1/2 W/GRP 70-131 PNCH PIN 1/4 TIP
38-319 SKT 3/8DR 12PT 19MM DP 485 GASKET SCRAPER 54-518 WR GEARED BOX 12PT 18MM FP 67-109 PLR DIAG CUT 7 HD W/GRP 70-155 PNCH START 3/32 TIP
38-707 SKT 3/8DR HEX BIT 4MM 52-207 WR COMB 12PT LNG 7MM FP 54-519 WR GEARED BOX 12PT 19MM FP 67-161 PLR DIAG CUT 6-3/8 W/GRP 70-157 PNCH START 1/8 TIP
38-709 SKT 3/8DR HEX BIT 5MM 52-208 WR COMB 12PT LNG 8MM FP 55-307 WR RAT FLR NUT 12PT 7MM 67-305 PLR CHN NSE 6-1/3 SD CUT 70-161 PNCH START 3/16 TIP
38-711 SKT 3/8DR HEX BIT 6MM 52-209 WR COMB 12PT LNG 9MM FP 55-308 WR RAT FLR NUT 12PT 8MM W/GRP 70-163 PNCH START 7/32 TIP
38-712 SKT 3/8DR HEX BIT 7MM 52-210 WR COMB 12PT LNG 10MM FP 55-309 WR RAT FLR NUT 12PT 9MM 67-357 PLR NDL NSE 5-7/16 W/GRP 70-165 PNCH START 1/4 TIP
38-713 SKT 3/8DR HEX BIT 8MM 52-211 WR COMB 12PT LNG 11MM FP 55-310 WR RAT FLR NUT 12PT 10MM 67-401 PLR NDL NSE 5-7/8 CURV 70-189 PNCH DRFT 1/8 TIP
38-714 SKT 3/8DR HEX BIT 9MM 52-212 WR COMB 12PT LNG 12MM FP 55-311 WR RAT FLR NUT 12PT 11MM W/GRP 70-193 PNCH DRFT 3/16 TIP
38-715 SKT 3/8DR HEX BIT 10MM 52-213 WR COMB 12PT LNG 13MM FP 55-312 WR RAT FLR NUT 12PT 12MM 67-503 PLR DKBL 8 W/GRP 70-197 PNCH DRFT 1/4 TIP
38-850 WR 3/8DR CRFT 10 MM 52-214 WR COMB 12PT LNG 14MM FP 55-313 WR RAT FLR NUT 12PT 13MM 67-535 PLR END CUT 7-3/8 W/GRP 70-235 PNCH CNTR 3/8
38-851 WR 3/8DR CRFT 11 MM 52-215 WR COMB 12PT LNG 15MM FP 55-314 WR RAT FLR NUT 12PT 14MM 67-667 PLR SLP JNT 6-1/2 W/GRP 70-239 PNCH CNTR 1/2
38-852 WR 3/8DR CRFT 12 MM 52-216 WR COMB 12PT LNG 16MM FP 55-315 WR RAT FLR NUT 12PT 15MM 67-669 PLR SLP JNT 8 W/GRP 70-253 PNCH PRCK 5/16
38-853 WR 3/8DR CRFT 13 MM 52-217 WR COMB 12PT LNG 17MM FP 55-317 WR RAT FLR NUT 12PT 17MM 67-717 PLR TNG&GRV 5 W/GRP 70-301 CHSL CLD 1/4 TIP
38-854 WR 3/8DR CRFT 14 MM 52-218 WR COMB 12PT LNG 18MM FP 56193 13 PC BALL PLUS SET 67-777 PLR TNG&GRV 6 W/GRP 70-303 CHSL CLD 5/16 TIP
38-855 WR 3/8DR CRFT 15 MM 52-219 WR COMB 12PT LNG 19MM FP 56194 9 PC METRIC BALL PLUS SET 67-779 PLR TNG&GRV 10 W/GRP 70-305 CHSL CLD 3/8 TIP
38-856 WR 3/8DR CRFT 16 MM 52-220 WR COMB 12PT LNG 20MM FP 64-086 WR TRQ 1/2DR 25-250 FT/LB 67-783 PLR TNG&GRV 16 W/GRP 70-309 CHSL CLD 1/2 TIP
38-857 WR 3/8DR CRFT 17 MM 52-221 WR COMB 12PT LNG 21MM FP 66-150 SCRDR PHLP #2X1-1/2 67-901 PLR WIRE STRPR CRMP CUT 8-1/4 70-311 CHSL CLD 5/8 TIP
38-858 WR 3/8DR CRFT 18 MM 52-222 WR COMB 12PT LNG 22MM FP 66-152 SCRDR PHLP #0X2-1/2 68-025 PLR RET RNG CONV .038 0D 70-313 CHSL CLD 3/4 TIP
38-859 WR 3/8DR CRFT 19 MM 52-223 WR COMB 12PT LNG 23MM FP 66-153 SCRDR PHLP #1X3 68-026 PLR RET RNG CONV .038 45D 70-315 CHSL CLD 7/8 TIP
38-861 WR 3/8DR CRFT 21 MM 52-224 WR COMB 12PT LNG 24MM FP 66-155 SCRDR PHLP #1X6 68-027 PLR RET RNG CONV .038 90D 70-317 CHSL CLD 1 TIP
38-862 WR 3/8DR CRFT 22 MM 53-016 WR OE 6X7MM FP 66-156 SCRDR PHLP #2X4 68-028 PLR RET RNG CONV .047 0D 70-319 CHSL CLD 1-1/8 TIP
39-110 SKT 1/2DR 12PT 10MM 53-022 WR OE 8X9MM FP 66-158 SCRDR PHLP #2X8 68-029 PLR RET RNG CONV .047 45D 70-503 ALIGNING BAR PINCH 5/8X16
39-111 SKT 1/2DR 12PT 11MM 53-034 WR OE 10X11MM FP 66-161 SCRDR PHLP #3X6 68-030 PLR RET RNG CONV .047 90D 70-505 ALIGNING BAR PINCH 3/4X24
39-112 SKT 1/2DR 12PT 12MM 53-052 WR OE 12X13MM FP 66-164 SCRDR PHLP #4X8 68-031 PLR RET RNG CONV .070 0D 70-519 CHSL BAR ROLL1/2X15
39-113 SKT 1/2DR 12PT 13MM 53-067 WR OE 14X15MM FP 66-203 SCRDR SLT 3/16X4 SQ 68-032 PLR RET RNG CONV .070 45D 70-521 CHSL BAR ROLL 5/8X18
39-114 SKT 1/2DR 12PT 14MM 53-082 WR OE 16X17MM FP 66-208 SCRDR SLT 1/4X4 SQ 68-033 PLR RET RNG CONV .070 90D 70-865 HCKS FLT FRM
39-115 SKT 1/2DR 12PT 15MM 53-096 WR OE 18X19MM FP 66-217 SCRDR SLT 5/16X6 SQ 68-034 PLR RET RNG CONV .090 0D 70-929 TELESCP MIRROR 2-1/8 DIA
39-116 SKT 1/2DR 12PT 16MM 53-115 WR OE 20X22MM FP 66-220 SCRDR SLT 3/8X8 SQ 68-035 PLR RET RNG CONV .090 45D 70-933 RETR TL MAG TELESCP
39-117 SKT 1/2DR 12PT 17MM 53-119 WR OE 21X23MM FP 66-226 SCRDR SLT 7/16X12 SQ 68-036 PLR RET RNG CONV .090 90D 70-950 SCR EXTR 1/8

Master Set Contents

39-118 SKT 1/2DR 12PT 18MM 53-142 WR OE 24X26MM FP 66-232 SCRDR SLT 1/4X1-1/2 SQ 68-241 SNIPS MINI 6-1/2 70-952 SCR EXTR 3/16
39-119 SKT 1/2DR 12PT 19MM 53-616 WR BX LNG 12PT 6X7MM 66-253 SCRDR CAB 1/8X3 68-255 SNIPS AVN 10 STRT 70-954 SCR EXTR 15/64
39-120 SKT 1/2DR 12PT 20MM 53-622 WR BX LNG 12PT 8X9MM 66-255 SCRDR CAB 1/8X4 68-275 SNIPS STRT 12-3/4 70-956 SCR EXTR 5/16
39-121 SKT 1/2DR 12PT 21MM 53-634 WR BX LNG 12PT 10X11MM 66-259 SCRDR CAB 1/8X8 68-310 KNFE UTIL RETRACT 70-958 SCR EXTR 3/8
39-122 SKT 1/2DR 12PT 22MM 53-652 WR BX LNG 12PT 12X13MM 66-262 SCRDR CAB 3/16X4 68-445 TP MEAS 1X25 LCK AUTO 70-960 SCR EXTR 15/32
39-123 SKT 1/2DR 12PT 23MM 53-667 WR BX LNG 12PT 14X15MM 66-268 SCRDR CAB 3/16X8 69-444 HMR BLL PN 8OZ WD HDL 70-962 SCR EXTR 9/16
39-124 SKT 1/2DR 12PT 24MM 53-685 WR BX LNG 12PT 16X18MM 66-806 NUT DR 3/16 HOLL SHFT 69-448 HMR BLL PN 1LB WD HDL 70-964 SCR EXTR 21/32
39-316 SKT 1/2DR 12PT 16MM DP 53-691 WR BX LNG 12PT 17X19MM 66-807 NUT DR 7/32 HOLL SHFT 69-452 HMR BLL PN 2LB WD HDL 70-966 SCR EXTR 13/16
39-317 SKT 1/2DR 12PT 17MM DP 53-719 WR BX LNG 12PT 21X23MM 66-808 NUT DR 1/4 HOLL SHFT 69-490 RBR MALL 32OZ 16-1/2 72-441 PULLER CONE 2/3 JAW
39-318 SKT 1/2DR 12PT 18MM DP 53-727 WR BX LNG 12PT 22X24MM 66-809 NUT DR 9/32 HOLL SHFT 69-513 HMR BRS 1.5LB W/GRP 73-010 WR PIPE 10 HD
39-319 SKT 1/2DR 12PT 19MM DP 53-762 WR BX LNG 12PT 27X30MM 66-810 NUT DR 5/16 HOLL SHFT 69-532 HMR DEAD BLOW STD 21OZ 73-014 WR PIPE 14 HD
39-320 SKT 1/2DR 12PT 20MM DP 53-775 WR BX LNG 12PT 30X32MM 66-811 NUT DR 11/32 HOLL SHFT 69-534 HMR DEAD BLOW STD 52OZ 73-018 WR PIPE 18 HD
39-321 SKT 1/2DR 12PT 21MM DP 54-510 WR GEARED BOX 12PT 10MM FP 66-812 NUT DR 3/8 HOLL SHFT 67-436 6" LOCKING PLIERS 73-295 CHAIN 3/8 TO 4
39-322 SKT 1/2DR 12PT 22MM DP 54-511 WR GEARED BOX 12PT 11MM FP 66-814 NUT DR 7/16 HOLL SHFT 70-000 PUNCH & CHISEL HOLDER 78-404 C-CL THRT DP 4 STD BLK (2)
39-324 SKT 1/2DR 12PT 24MM DP 54-512 WR GEARED BOX 12PT 12MM FP 66-816 NUT DR 1/2 HOLL SHFT 70-103 PNCH PIN 3/32 TIP 67-407 7" LOCKING PLIERS
39-325 SKT 1/2DR 12PT 25MM DP 54-513 WR GEARED BOX 12PT 13MM FP 66-818 NUT DR 9/16 HOLL SHFT 70-105 PNCH PIN 1/8 TIP
39-326 SKT 1/2DR 12PT 26MM DP 54-514 WR GEARED BOX 12PT 14MM FP 66-820 NUT DR 5/8 HOLL SHFT 70-107 PNCH PIN 5/32 TIP
39-717 SKT 1/2DR HEX BIT 12MM 54-515 WR GEARED BOX 12PT 15MM FP 66-924 SCR START SLT 5 70-109 PNCH PIN 3/16 TIP

Set 15-017 453 Pc. Master Set - Tools Only

10-006 SKT 1/4DR 6PT 3/16 10-918 HDL FLX 1/4DR 5-3/4 11-412 SKT 3/8DR 8PT 3/8 11-922 EXTEN 3/8DR 3 12-334 SKT 1/2DR 12PT 1-1/16 DP
10-007 SKT 1/4DR 6PT 7/32 10-921 EXTEN 1/4DR 2 11-414 SKT 3/8DR 8PT 7/16 11-923 EXTEN 3/8DR 6 12-336 SKT 1/2DR 12PT 1-1/8 DP
10-008 SKT 1/4DR 6PT 1/4 10-922 EXTEN 1/4DR 4 11-416 SKT 3/8DR 8PT 1/2 11-927 EXTEN 3/8DR 12 12-340 SKT 1/2DR 12PT 1-1/4 DP
10-009 SKT 1/4DR 6PT 9/32 10-923 EXTEN 1/4DR 6 11-512 SKT 3/8DR UNV 12PT 3/8 11-929 EXTEN FLX 3/8DR 7-1/4 12-412 SKT 1/2DR 8PT 3/8
10-010 SKT 1/4DR 6PT 5/16 10-929 EXTEN 1/4DR FLX 6 11-514 SKT 3/8DR UNV 12PT 7/16 11-935 HDL SPD 3/8DR 16-1/2 12-414 SKT 1/2DR 8PT 7/16
10-011 SKT 1/4DR 6PT 11/32 10-935 HDL SPD 1/4DR 15-3/4 11-516 SKT 3/8DR UNV 12PT 1/2 11-938 HDL T 3/8DR 8 12-416 SKT 1/2DR 8PT 1/2
10-012 SKT 1/4DR 6PT 3/8 10-938 HDL T 1/4DR 4-1/2 11-518 SKT 3/8DR UNV 12PT 9/16 11-947 UNV JNT 3/8DR 12-418 SKT 1/2DR 8PT 9/16
10-014 SKT 1/4DR 6PT 7/16 10-943 HDL SPIN 1/4DR 6 11-520 SKT 3/8DR UNV 12PT 5/8 11-972 RAT 3/8DR 7-3/8 12-420 SKT 1/2DR 8PT 5/8
10-016 SKT 1/4DR 6PT 1/2 10-947 UNV JNT 1/4DR 11-522 SKT 3/8DR UNV 12PT 11/16 11-974 RAT 3/8DR FLX 9-1/2 12-422 SKT 1/2DR 8PT 11/16
10-018 SKT 1/4DR 6PT 9/16 10-972 RAT 1/4DR 5-9/32 REPL 10-903 11-524 SKT 3/8DR UNV 12PT 3/4 12-112 SKT 1/2DR 12PT 3/8 12-424 SKT 1/2DR 8PT 3/4
10-206 SKT 1/4DR 6PT 3/16 DP 67-410 10" LOCKING PLIERS 11-708 SKT 3/8DR HEX BIT 1/8 12-114 SKT 1/2DR 12PT 7/16 12-426 SKT 1/2DR 8PT 13/16
10-207 SKT 1/4DR 6PT 7/32 DP 11-108 SKT 3/8DR 12PT 1/4 11-710 SKT 3/8DR HEX BIT 5/32 12-116 SKT 1/2DR 12PT 1/2 12-428 SKT 1/2DR 8PT 7/8
10-208 SKT 1/4DR 6PT 1/4 DP 11-110 SKT 3/8DR 12PT 5/16 11-711 SKT 3/8DR HEX BIT 3/16 12-118 SKT 1/2DR 12PT 9/16 12-432 SKT 1/2DR 8PT 1
10-209 SKT 1/4DR 6PT 9/32 DP 11-112 SKT 3/8DR 12PT 3/8 11-712 SKT 3/8DR HEX BIT 7/32 12-119 SKT 1/2DR 12PT 19/32 12-516 SKT 1/2DR UNV 12PT 1/2
10-210 SKT 1/4DR 6PT 5/16 DP 11-114 SKT 3/8DR 12PT 7/16 11-713 SKT 3/8DR HEX BIT 1/4 12-120 SKT 1/2DR 12PT 5/8 12-518 SKT 1/2DR UNV 12PT 9/16
10-211 SKT 1/4DR 6PT 11/32 DP 11-116 SKT 3/8DR 12PT 1/2 11-714 SKT 3/8DR HEX BIT 5/16 12-122 SKT 1/2DR 12PT 11/16 12-520 SKT 1/2DR UNV 12PT 5/8
10-212 SKT 1/4DR 6PT 3/8 DP 11-118 SKT 3/8DR 12PT 9/16 11-715 SKT 3/8DR HEX BIT 3/8 12-124 SKT 1/2DR 12PT 3/4 12-713 SKT 1/2DR HEX BIT 1/4
10-214 SKT 1/4DR 6PT 7/16 DP 11-120 SKT 3/8DR 12PT 5/8 11-802 SKT 3/8DR SLT BIT 1/4 12-125 SKT 1/2DR 12PT 25/32 12-714 SKT 1/2DR HEX BIT 5/16
10-216 SKT 1/4DR 6PT 1/2 DP 11-122 SKT 3/8DR 12PT 11/16 11-822 SKT 3/8DR PHLP BIT #2 12-126 SKT 1/2DR 12PT 13/16 12-715 SKT 1/2DR HEX BIT 3/8
10-218 SKT 1/4DR 6PT 9/16 DP 11-124 SKT 3/8DR 12PT 3/4 11-825 SKT 3/8DR PHLP BIT #3 12-128 SKT 1/2DR 12PT 7/8 12-716 SKT 1/2DR HEX BIT 7/16
10-408 SKT 1/4DR 4PT 1/4 11-126 SKT 3/8DR 12PT 13/16 11-828 SKT 3/8DR PHLP BIT #4 12-130 SKT 1/2DR 12PT 15/16 12-717 SKT 1/2DR HEX BIT 1/2
10-410 SKT 1/4DR 8PT 5/16 11-128 SKT 3/8DR 12PT 7/8 11-850 WR 3/8DR CRFT 3/8 12-132 SKT 1/2DR 12PT 1 12-718 SKT 1/2DR HEX BIT 9/16
10-412 SKT 1/4DR 8PT 3/8 11-130 SKT 3/8DR 12PT 15/16 11-851 WR 3/8DR CRFT 7/16 12-134 SKT 1/2DR 12PT 1-1/16 12-719 SKT 1/2DR HEX BIT 5/8
10-704 SKT 1/4 DR HEX BIT 1/16 11-132 SKT 3/8DR 12PT 1 11-852 WR 3/8DR CRFT 1/2 12-136 SKT 1/2DR 12PT 1-1/8 12-892 SKT 1/2DR DRAG LNK 7/64
10-705 SKT 1/4 DR HEX BIT 5/64 11-308 SKT 3/8DR 12PT 1/4 DP 11-853 WR 3/8DR CRFT 9/16 12-138 SKT 1/2DR 12PT 1-3/16 12-893 SKT 1/2DR DRAG LNK 3/32
10-706 SKT 1/4 DR HEX BIT 3/32 11-310 SKT 3/8DR 12PT 5/16 DP 11-854 WR 3/8DR CRFT 5/8 12-140 SKT 1/2DR 12PT 1-1/4 12-918 HDL FLX 1/2DR 17
10-707 SKT 1/4 DR HEX BIT 7/64 11-312 SKT 3/8DR 12PT 3/8 DP 11-855 WR 3/8DR CRFT 11/16 12-142 SKT 1/2DR 12PT 1-5/16 12-921 EXTEN 1/2DR 2-1/2
10-708 SKT 1/4 DR HEX BIT 1/8 11-314 SKT 3/8DR 12PT 7/16 DP 11-856 WR 3/8DR CRFT 3/4 12-144 SKT 1/2DR 12PT 1-3/8 12-923 EXTEN 1/2DR 5
10-709 SKT 1/4 DR HEX BIT 9/64 11-316 SKT 3/8DR 12PT 1/2 DP 11-857 WR 3/8DR CRFT 13/16 12-146 SKT 1/2DR 12PT 1-7/16 12-924 EXTEN 1/2DR 10
10-710 SKT 1/4 DR HEX BIT 5/32 11-318 SKT 3/8DR 12PT 9/16 DP 11-858 WR 3/8DR CRFT 7/8 12-148 SKT 1/2DR 12PT 1-1/2 12-935 HDL SPD 1/2DR 19
10-711 SKT 1/4 DR HEX BIT 3/16 11-320 SKT 3/8DR 12PT 5/8 DP 11-872 SKT 3/8DR TRX BIT T15 12-316 SKT 1/2DR 12PT 1/2 DP 12-938 HDL T 1/2DR 11
10-712 SKT 1/4 DR HEX BIT 7/32 11-322 SKT 3/8DR 12PT 11/16 DP 11-874 SKT 3/8DR TRX BIT T20 12-318 SKT 1/2DR 12PT 9/16 DP 12-944 ADP RAT 1/2DR
10-713 SKT 1/4 DR HEX BIT 1/4 11-324 SKT 3/8DR 12PT 3/4 DP 11-876 SKT 3/8DR TRX BIT T25 12-320 SKT 1/2DR 12PT 5/8 DP 12-947 UNV JNT 1/2DR
10-714 SKT 1/4 DR HEX BIT 5/16 11-326 SKT 3/8DR 12PT 13/16 DP 11-878 SKT 3/8DR TRX BIT T27 12-322 SKT 1/2DR 12PT 11/16 DP 12-972 RAT 1/2DR 10-1/2 REPL 12-903
10-801 SKT 1/4DR SLT BIT 3/16 11-328 SKT 3/8DR 12PT 7/8 DP 11-880 SKT 3/8DR TRX BIT T30 12-324 SKT 1/2DR 12PT 3/4 DP 12-973 RAT 1/2DR 15 REPL 12-904
10-802 SKT 1/4DR SLT BIT 1/4 11-330 SKT 3/8DR 12PT 15/16 DP 11-882 SKT 3/8DR TRX BIT T40 12-326 SKT 1/2DR 12PT 13/16 DP 12-974 RAT 1/2DR FLX 14-1/4
10-821 SKT 1/4DR PHLP BIT #1 11-332 SKT 3/8DR 12PT 1 DP 11-884 SKT 3/8DR TRX BIT T45 12-328 SKT 1/2DR 12PT 7/8 DP 13-128 SKT 3/4DR 12PT 7/8
10-822 SKT 1/4DR PHLP BIT #2 11-408 SKT 3/8DR 8PT 1/4 11-886 SKT 3/8DR TRX BIT T50 12-330 SKT 1/2DR 12PT 15/16 DP 13-130 SKT 3/4DR 12PT 15/16
10-823 SKT 1/4DR PHLP BIT #3 11-410 SKT 3/8DR 8PT 5/16 11-918 HDL FLX 3/8DR 8-1/2 12-332 SKT 1/2DR 12PT 1 DP Continued . . .

A-6
 A
Master Set Contents
Set 15-017 453 Pc. Master Set Cont.
13-132 SKT 3/4DR 12PT 1 25-242 WR COMB 12PT LNG 1-5/16 27-914 WR ANG OE 7/16 MDGT 15&75D FP 66-814 NUT DR 7/16 HOLL SHFT 70-131 PNCH PIN 1/4 TIP
13-134 SKT 3/4DR 12PT 1-1/16 25-244 WR COMB 12PT LNG 1-3/8 27-916 WR ANG OE 1/2 MDGT 15&75D FP 66-816 NUT DR 1/2 HOLL SHFT 70-155 PNCH START 3/32 TIP
13-136 SKT 3/4DR 12PT 1-1/8 25-246 WR COMB 12PT LNG 1-7/16 28-212 WR COMB FLR NUT 6PT 3/8 FP 66-818 NUT DR 9/16 HOLL SHFT 70-157 PNCH START 1/8 TIP
13-138 SKT 3/4DR 12PT 1-3/16 25-248 WR COMB 12PT LNG 1-1/2 28-214 WR COMB FLR NUT 6PT 7/16 FP 66-820 NUT DR 5/8 HOLL SHFT 70-161 PNCH START 3/16 TIP
13-140 SKT 3/4DR 12PT 1-1/4 25-512 WR COMB FLX HD 12PT 3/8 FP 28-216 WR COMB FLR NUT 6PT 1/2 FP 66-924 SCR START SLT 5 70-163 PNCH START 7/32 TIP
13-142 SKT 3/4DR 12PT 1-5/16 25-514 WR COMB FLX HD 12PT 7/16 FP 28-218 WR COMB FLR NUT 6PT 9/16 FP 66-933 SCR START PHLP 5 70-165 PNCH START 1/4 TIP
13-144 SKT 3/4DR 12PT 1-3/8 25-516 WR COMB FLX HD 12PT 1/2 FP 28-220 WR COMB FLR NUT 6PT 5/8 FP 67-067 PLR LNMN 8-1/2 W/GRP 70-189 PNCH DRFT 1/8 TIP
13-146 SKT 3/4DR 12PT 1-7/16 25-518 WR COMB FLX HD 12PT 9/16 FP 28-222 WR COMB FLR NUT 6PT 11/16 FP 67-109 PLR DIAG CUT 7 HD W/GRP 70-193 PNCH DRFT 3/16 TIP
13-148 SKT 3/4DR 12PT 1-1/2 25-520 WR COMB FLX HD 12PT 5/8 FP 28-224 WR COMB FLR NUT 6PT 3/4 FP 67-161 PLR DIAG CUT 6-3/8 W/GRP 70-197 PNCH DRFT 1/4 TIP
13-150 SKT 3/4DR 12PT 1-9/16 25-522 WR COMB FLX HD 12PT 11/16 FP 28-312 WR RAT FLR NUT 12PT 3/8 67-305 PLR CHN NSE 6-1/3 SD CUT W/GRP 70-235 PNCH CNTR 3/8
13-152 SKT 3/4DR 12PT 1-5/8 25-524 WR COMB FLX HD 12PT 3/4 FP 28-314 WR RAT FLR NUT 12PT 7/16 67-357 PLR NDL NSE 5-7/16 W/GRP 70-239 PNCH CNTR 1/2
13-154 SKT 3/4DR 12PT 1-11/16 26-022 WR OE 1/4X5/16 FP 28-316 WR RAT FLR NUT 12PT 1/2 67-401 PLR NDL NSE 5-7/8 CURV W/GRP 70-253 PNCH PRCK 5/16
13-156 SKT 3/4DR 12PT 1-3/4 26-034 WR OE 5/16X3/8 FP 28-318 WR RAT FLR NUT 12PT 9/16 67-503 PLR DKBL 8 W/GRP 70-301 CHSL CLD 1/4 TIP
13-158 SKT 3/4DR 12PT 1-13/16 26-058 WR OE 7/16X1/2 FP 28-320 WR RAT FLR NUT 12PT 5/8 67-535 PLR END CUT 7-3/8 W/GRP 70-303 CHSL CLD 5/16 TIP
13-160 SKT 3/4DR 12PT 1-7/8 26-067 WR OE 1/2X9/16 FP 28-322 WR RAT FLR NUT 12PT 11/16 67-667 PLR SLP JNT 6-1/2 W/GRP 70-305 CHSL CLD 3/8 TIP
13-164 SKT 3/4DR 12PT 2 26-079 WR OE 9/16X5/8 FP 28-324 WR RAT FLR NUT 12PT 3/4 67-669 PLR SLP JNT 8 W/GRP 70-309 CHSL CLD 1/2 TIP
13-168 SKT 3/4DR 12PT 2-1/8 26-097 WR OE 5/8X3/4 FP 28-406 WR ADJ 6 67-717 PLR TNG&GRV 5 W/GRP 70-311 CHSL CLD 5/8 TIP
13-170 SKT 3/4DR 12PT 2-3/16 26-106 WR OE 11/16X3/4 FP 28-408 WR ADJ 8 67-777 PLR TNG&GRV 6 W/GRP 70-313 CHSL CLD 3/4 TIP
13-172 SKT 3/4DR 12PT 2-1/4 26-133 WR OE 13/16X7/8 FP 28-410 WR ADJ 10 67-779 PLR TNG&GRV 10 W/GRP 70-315 CHSL CLD 7/8 TIP
13-176 SKT 3/4DR 12PT 2-3/8 26-151 WR OE 15/16X1 FP 28-412 WR ADJ 12 67-783 PLR TNG&GRV 16 W/GRP 70-317 CHSL CLD 1 TIP
13-918 HDL FLX 3/4DR 22 26-166 WR OE 1-1/16X1-1/8 FP 28-415 WR ADJ 15 67-901 PLR WIRE STRPR CRMP CUT 8-1/4 70-319 CHSL CLD 1-1/8 TIP
13-922 EXTEN 3/4DR 5 27-001 WR BX 6PT MDGT 3/16X13/64 FP 3470 HOOK & PIN PULLER 68-025 PLR RET RNG CONV .038 0D 70-503 ALIGNING BAR PINCH 5/8X16
13-923 EXTEN 3/4DR 8 27-016 WR BX 6PT MDGT 7/32X15/64 FP 485 GASKET SCRAPER 68-026 PLR RET RNG CONV .038 45D 70-505 ALIGNING BAR PINCH 3/4X24
13-925 EXTEN 3/4DR 16 27-019 WR BX 6PT MDGT 1/4X9/32 FP 56193 13 PC BALL PLUS SET 68-027 PLR RET RNG CONV .038 90D 70-519 CHSL BAR ROLL1/2X15
13-938 HDL T 3/4DR 17-1/2 27-031 WR BX 6PT MDGT 5/16X11/32 FP 64-086 WR TRQ 1/2DR 25-250 FT/LB 68-028 PLR RET RNG CONV .047 0D 70-521 CHSL BAR ROLL 5/8X18
13-947 UNV JNT 3/4DR 27-143 WR BX 12PT SHT 3/8X7/16 FP 66-150 SCRDR PHLP #2X1-1/2 68-029 PLR RET RNG CONV .047 45D 70-865 HCKS FLT FRM
13-972 RAT 3/4DR 19 27-167 WR BX 12PT SHT 1/2X9/16 FP 66-152 SCRDR PHLP #0X2-1/2 68-030 PLR RET RNG CONV .047 90D 70-929 TELESCP MIRROR 2-1/8 DIA
2425 SCRAPER 27-194 WR BX 12PT SHT 5/8X11/16 FP 66-153 SCRDR PHLP #1X3 68-031 PLR RET RNG CONV .070 0D 70-933 RETR TL MAG TELESCP
25-004 WR COMB 6PT SHT 1/8 FP 27-206 WR BX 12PT SHT 11/16X3/4 FP 66-155 SCRDR PHLP #1X6 68-032 PLR RET RNG CONV .070 45D 70-950 SCR EXTR 1/8
25-005 WR COMB 6PT SHT 5/32 FP 27-343 WR BX 12PT LNG 3/8X7/16 FP 66-156 SCRDR PHLP #2X4 68-033 PLR RET RNG CONV .070 90D 70-952 SCR EXTR 3/16
Master Set Contents

25-006 WR COMB 6PT SHT 3/16 FP 27-367 WR BX 12PT LNG 1/2X9/16 FP 66-158 SCRDR PHLP #2X8 68-034 PLR RET RNG CONV .090 0D 70-954 SCR EXTR 15/64
25-008 WR COMB 6PT SHT 1/4 FP 27-394 WR BX 12PT LNG 5/8X11/16 FP 66-161 SCRDR PHLP #3X6 68-035 PLR RET RNG CONV .090 45D 70-956 SCR EXTR 5/16
25-009 WR COMB 6PT SHT 9/32 FP 27-424 WR BX 12PT LNG 3/4X7/8 FP 66-164 SCRDR PHLP #4X8 68-036 PLR RET RNG CONV .090 90D 70-958 SCR EXTR 3/8
25-010 WR COMB 6PT SHT 5/16 FP 27-451 WR BX 12PT LNG 15/16X1 FP 66-203 SCRDR SLT 3/16X4 SQ 68-241 SNIPS MINI 6-1/2 70-960 SCR EXTR 15/32
25-011 WR COMB 6PT SHT 11/32 FP 27-466 WR BX 12PT LNG 1-1/16X1-1/8 FP 66-208 SCRDR SLT 1/4X4 SQ 68-255 SNIPS AVN 10 STRT 70-962 SCR EXTR 9/16
25-012 WR COMB 6PT SHT 3/8 FP 27-510 WR GEARED BOX 12PT 3/8 FP 66-217 SCRDR SLT 5/16X6 SQ 68-310 KNFE UTIL RETRACT 70-964 SCR EXTR 21/32
25-210 WR COMB 12PT LNG 5/16 FP 27-511 WR GEARED BOX 12PT 7/16 FP 66-220 SCRDR SLT 3/8X8 SQ 68-445 TP MEAS 1X25 LCK AUTO 70-966 SCR EXTR 13/16
25-212 WR COMB 12PT LNG 3/8 FP 27-512 WR GEARED BOX 12PT 1/2 FP 66-226 SCRDR SLT 7/16X12 SQ 69-444 HMR BLL PN 8OZ WD HDL 72-441 PULLER CONE 2/3 JAW
25-214 WR COMB 12PT LNG 7/16 FP 27-513 WR GEARED BOX 12PT 9/16 FP 66-232 SCRDR SLT 1/4X1-1/2 SQ 69-448 HMR BLL PN 1LB WD HDL 73-010 WR PIPE 10 HD
25-216 WR COMB 12PT LNG 1/2 FP 27-514 WR GEARED BOX 12PT 5/8 FP 66-253 SCRDR CAB 1/8X3 69-452 HMR BLL PN 2LB WD HDL 73-014 WR PIPE 14 HD
25-218 WR COMB 12PT LNG 9/16 FP 27-515 WR GEARED BOX 12PT 11/16 FP 66-255 SCRDR CAB 1/8X4 69-490 RBR MALL 32OZ 16-1/2 73-018 WR PIPE 18 HD
25-220 WR COMB 12PT LNG 5/8 FP 27-516 WR GEARED BOX 12PT 3/4 FP 66-259 SCRDR CAB 1/8X8 69-513 HMR BRS 1.5LB W/GRP 73-295 CHAIN 3/8 TO 4
25-222 WR COMB 12PT LNG 11/16 FP 27-904 WR ANG OE 15/64 MDGT 66-262 SCRDR CAB 3/16X4 69-532 HMR DEAD BLOW STD 21OZ 78-404 C-CL THRT DP 4 STD SCREW
25-224 WR COMB 12PT LNG 3/4 FP 15&75D FP 66-268 SCRDR CAB 3/16X8 69-534 HMR DEAD BLOW STD 52OZ BLK (2)
25-226 WR COMB 12PT LNG 13/16 FP 27-907 WR ANG OE 7/32 MDGT 15&75D FP 66-806 NUT DR 3/16 HOLL SHFT 67-436 6" LOCKING PLIERS 67-407 7" LOCKING PLIERS
25-228 WR COMB 12PT LNG 7/8 FP 27-908 WR ANG OE 1/4 MDGT 15&75D FP 66-807 NUT DR 7/32 HOLL SHFT 70-000 PUNCH & CHISEL HOLDER
25-230 WR COMB 12PT LNG 15/16 FP 27-909 WR ANG OE 9/32 MDGT 15&75D FP 66-808 NUT DR 1/4 HOLL SHFT 70-103 PNCH PIN 3/32 TIP
25-232 WR COMB 12PT LNG 1 FP 27-910 WR ANG OE 5/16 MDGT 15&75D FP 66-809 NUT DR 9/32 HOLL SHFT 70-105 PNCH PIN 1/8 TIP
25-234 WR COMB 12PT LNG 1-1/16 FP 27-911 WR ANG OE 11/32 MDGT 66-810 NUT DR 5/16 HOLL SHFT 70-107 PNCH PIN 5/32 TIP
25-236 WR COMB 12PT LNG 1-1/8 FP 15&75D FP 66-811 NUT DR 11/32 HOLL SHFT 70-109 PNCH PIN 3/16 TIP
25-240 WR COMB 12PT LNG 1-1/4 FP 27-912 WR ANG OE 3/8 MDGT 15&75D FP 66-812 NUT DR 3/8 HOLL SHFT 70-129 PNCH PIN 7/32 TIP

Set 15-022 272 Pc. Intermediate Set - Tools Only

10-006 SKT 1/4DR 6PT 3/16 11-314 SKT 3/8DR 12PT 7/16 DP 12-126 SKT 1/2DR 12PT 13/16 13-146 SKT 3/4DR 12PT 1-7/16 26-106 WR OE 11/16X3/4 FP
10-007 SKT 1/4DR 6PT 7/32 11-316 SKT 3/8DR 12PT 1/2 DP 12-128 SKT 1/2DR 12PT 7/8 13-148 SKT 3/4DR 12PT 1-1/2 26-133 WR OE 13/16X7/8 FP
10-008 SKT 1/4DR 6PT 1/4 11-318 SKT 3/8DR 12PT 9/16 DP 12-130 SKT 1/2DR 12PT 15/16 13-152 SKT 3/4DR 12PT 1-5/8 26-151 WR OE 15/16X1 FP
10-009 SKT 1/4DR 6PT 9/32 11-320 SKT 3/8DR 12PT 5/8 DP 12-132 SKT 1/2DR 12PT 1 13-156 SKT 3/4DR 12PT 1-3/4 26-166 WR OE 1-1/16X1-1/8 FP
10-010 SKT 1/4DR 6PT 5/16 11-322 SKT 3/8DR 12PT 11/16 DP 12-134 SKT 1/2DR 12PT 1-1/16 13-158 SKT 3/4DR 12PT 1-13/16 27-143 WR BX 12PT SHT 3/8X7/16 FP
10-011 SKT 1/4DR 6PT 11/32 11-324 SKT 3/8DR 12PT 3/4 DP 12-136 SKT 1/2DR 12PT 1-1/8 13-160 SKT 3/4DR 12PT 1-7/8 27-167 WR BX 12PT SHT 1/2X9/16 FP
10-012 SKT 1/4DR 6PT 3/8 11-326 SKT 3/8DR 12PT 13/16 DP 12-140 SKT 1/2DR 12PT 1-1/4 13-164 SKT 3/4DR 12PT 2 27-194 WR BX 12PT SHT 5/8X11/16 FP
10-014 SKT 1/4DR 6PT 7/16 11-328 SKT 3/8DR 12PT 7/8 DP 12-316 SKT 1/2DR 12PT 1/2 DP 13-918 HDL FLX 3/4DR 22 27-206 WR BX 12PT SHT 11/16X3/4 FP
10-016 SKT 1/4DR 6PT 1/2 11-408 SKT 3/8DR 8PT 1/4 12-318 SKT 1/2DR 12PT 9/16 DP 13-923 EXTEN 3/4DR 8 27-510 WR GEARED BOX 12PT 3/8 FP
10-018 SKT 1/4DR 6PT 9/16 11-410 SKT 3/8DR 8PT 5/16 12-320 SKT 1/2DR 12PT 5/8 DP 13-925 EXTEN 3/4DR 16 27-511 WR GEARED BOX 12PT 7/16 FP
10-206 SKT 1/4DR 6PT 3/16 DP 11-412 SKT 3/8DR 8PT 3/8 12-322 SKT 1/2DR 12PT 11/16 DP 13-938 HDL T 3/4DR 17-1/2 27-512 WR GEARED BOX 12PT 1/2 FP
10-207 SKT 1/4DR 6PT 7/32 DP 11-514 SKT 3/8DR UNV 12PT 7/16 12-324 SKT 1/2DR 12PT 3/4 DP 13-972 RAT 3/4DR 19 27-513 WR GEARED BOX 12PT 9/16 FP
10-208 SKT 1/4DR 6PT 1/4 DP 11-516 SKT 3/8DR UNV 12PT 1/2 12-326 SKT 1/2DR 12PT 13/16 DP 25-210 WR COMB 12PT LNG 5/16 FP 27-514 WR GEARED BOX 12PT 5/8 FP
10-209 SKT 1/4DR 6PT 9/32 DP 11-518 SKT 3/8DR UNV 12PT 9/16 12-328 SKT 1/2DR 12PT 7/8 DP 25-212 WR COMB 12PT LNG 3/8 FP 27-515 WR GEARED BOX 12PT 11/16 FP
10-210 SKT 1/4DR 6PT 5/16 DP 11-520 SKT 3/8DR UNV 12PT 5/8 12-330 SKT 1/2DR 12PT 15/16 DP 25-214 WR COMB 12PT LNG 7/16 FP 27-516 WR GEARED BOX 12PT 3/4 FP
10-211 SKT 1/4DR 6PT 11/32 DP 11-524 SKT 3/8DR UNV 12PT 3/4 12-332 SKT 1/2DR 12PT 1 DP 25-216 WR COMB 12PT LNG 1/2 FP 28-212 WR COMB FLR NUT 6PT 3/8 FP
10-212 SKT 1/4DR 6PT 3/8 DP 11-708 SKT 3/8DR HEX BIT 1/8 12-334 SKT 1/2DR 12PT 1-1/16 DP 25-218 WR COMB 12PT LNG 9/16 FP 28-214 WR COMB FLR NUT 6PT 7/16 FP
10-214 SKT 1/4DR 6PT 7/16 DP 11-710 SKT 3/8DR HEX BIT 5/32 12-336 SKT 1/2DR 12PT 1-1/8 DP 25-220 WR COMB 12PT LNG 5/8 FP 28-216 WR COMB FLR NUT 6PT 1/2 FP
10-216 SKT 1/4DR 6PT 1/2 DP 11-711 SKT 3/8DR HEX BIT 3/16 12-340 SKT 1/2DR 12PT 1-1/4 DP 25-222 WR COMB 12PT LNG 11/16 FP 28-218 WR COMB FLR NUT 6PT 9/16 FP
10-218 SKT 1/4DR 6PT 9/16 DP 11-712 SKT 3/8DR HEX BIT 7/32 12-717 SKT 1/2DR HEX BIT 1/2 25-224 WR COMB 12PT LNG 3/4 FP 28-220 WR COMB FLR NUT 6PT 5/8 FP
10-918 HDL FLX 1/4DR 5-3/4 11-713 SKT 3/8DR HEX BIT 1/4 12-718 SKT 1/2DR HEX BIT 9/16 25-226 WR COMB 12PT LNG 13/16 FP 28-222 WR COMB FLR NUT 6PT 11/16 FP
10-921 EXTEN 1/4DR 2 11-714 SKT 3/8DR HEX BIT 5/16 12-719 SKT 1/2DR HEX BIT 5/8 25-228 WR COMB 12PT LNG 7/8 FP 28-224 WR COMB FLR NUT 6PT 3/4 FP
10-923 EXTEN 1/4DR 6 11-715 SKT 3/8DR HEX BIT 3/8 12-918 HDL FLX 1/2DR 17 25-230 WR COMB 12PT LNG 15/16 FP 28-406 WR ADJ 6
10-943 HDL SPIN 1/4DR 6 11-918 HDL FLX 3/8DR 8-1/2 12-921 EXTEN 1/2DR 2-1/2 25-232 WR COMB 12PT LNG 1 FP 28-408 WR ADJ 8
10-947 UNV JNT 1/4DR 11-922 EXTEN 3/8DR 3 12-923 EXTEN 1/2DR 5 25-234 WR COMB 12PT LNG 1-1/16 FP 28-410 WR ADJ 10
10-972 RAT 1/4DR 5-9/32 11-923 EXTEN 3/8DR 6 12-924 EXTEN 1/2DR 10 25-236 WR COMB 12PT LNG 1-1/8 FP 28-412 WR ADJ 12
67-410 10" LOCKING PLIERS 11-927 EXTEN 3/8DR 12 12-935 HDL SPD 1/2DR 19 25-240 WR COMB 12PT LNG 1-1/4 FP 3470 HOOK & PIN PULLER
11-112 SKT 3/8DR 12PT 3/8 11-935 HDL SPD 3/8DR 16-1/2 12-947 UNV JNT 1/2DR 25-242 WR COMB 12PT LNG 1-5/16 485 GASKET SCRAPER
11-114 SKT 3/8DR 12PT 7/16 11-947 UNV JNT 3/8DR 12-972 RAT 1/2DR 10-1/2 REPL 12-903 25-244 WR COMB 12PT LNG 1-3/8 56196 12 PC BALL PLUS SET
11-116 SKT 3/8DR 12PT 1/2 11-972 RAT 3/8DR 7-3/8 REPL 11-903 13-128 SKT 3/4DR 12PT 7/8 25-246 WR COMB 12PT LNG 1-7/16 64-086 WR TRQ 1/2DR 25-250 FT/LB
11-118 SKT 3/8DR 12PT 9/16 12-112 SKT 1/2DR 12PT 3/8 13-130 SKT 3/4DR 12PT 15/16 25-248 WR COMB 12PT LNG 1-1/2 66-150 SCRDR PHLP #2X1-1/2
11-120 SKT 3/8DR 12PT 5/8 12-114 SKT 1/2DR 12PT 7/16 13-132 SKT 3/4DR 12PT 1 26-022 WR OE 1/4X5/16 FP 66-152 SCRDR PHLP #0X2-1/2
11-122 SKT 3/8DR 12PT 11/16 12-116 SKT 1/2DR 12PT 1/2 13-134 SKT 3/4DR 12PT 1-1/16 26-034 WR OE 5/16X3/8 FP 66-153 SCRDR PHLP #1X3
11-124 SKT 3/8DR 12PT 3/4 12-118 SKT 1/2DR 12PT 9/16 13-136 SKT 3/4DR 12PT 1-1/8 26-058 WR OE 7/16X1/2 FP 66-156 SCRDR PHLP #2X4
11-126 SKT 3/8DR 12PT 13/16 12-120 SKT 1/2DR 12PT 5/8 13-140 SKT 3/4DR 12PT 1-1/4 26-067 WR OE 1/2X9/16 FP 66-161 SCRDR PHLP #3X6
11-128 SKT 3/8DR 12PT 7/8 12-122 SKT 1/2DR 12PT 11/16 13-142 SKT 3/4DR 12PT 1-5/16 26-079 WR OE 9/16X5/8 FP 66-164 SCRDR PHLP #4X8
11-312 SKT 3/8DR 12PT 3/8 DP 12-124 SKT 1/2DR 12PT 3/4 13-144 SKT 3/4DR 12PT 1-3/8 26-097 WR OE 5/8X3/4 FP Continued . . .

A-7
 A
Master Set Contents
Set 15-022 272 Pc. Intermediate Set Cont.
66-203 SCRDR SLT 3/16X4 SQ 67-357 PLR NDL NSE 5-7/16 W/GRP 68-034 PLR RET RNG CONV .090 0D 70-161 PNCH START 3/16 TIP 70-964 SCR EXTR 21/32
66-208 SCRDR SLT 1/4X4 SQ 67-401 PLR NDL NSE 5-7/8 CURV W/GRP 68-035 PLR RET RNG CONV .090 45D 70-235 PNCH CNTR 3/8 70-966 SCR EXTR 13/16
66-217 SCRDR SLT 5/16X6 SQ 67-503 PLR DKBL 8 W/GRP 68-036 PLR RET RNG CONV .090 90D 70-303 CHSL CLD 5/16 TIP 72-441 CONE PULLER 2/3 JAW
66-220 SCRDR SLT 3/8X8 SQ 67-535 PLR END CUT 7-3/8 W/GRP 68-241 SNIPS MINI 6-1/2 70-307 CHSL CLD 7/16 TIP 73-010 WR PIPE 10 HD
66-226 SCRDR SLT 7/16X12 SQ 67-669 PLR SLP JNT 8 W/GRP 68-255 SNIPS AVN 10 STRT 70-309 CHSL CLD 1/2 TIP 73-014 WR PIPE 14 HD
66-232 SCRDR SLT 1/4X1-1/2 SQ 67-779 PLR TNG&GRV 10 W/GRP 68-310 KNFE UTIL RETRACT 70-393 CHSL CAPE 7/32 TIP 73-018 WR PIPE 18 HD
66-808 NUT DR 1/4 HOLL SHFT 67-783 PLR TNG&GRV 16 W/GRP 68-445 TP MEAS 1X25 LCK AUTO 70-421 CHSL DIA PT 3/16 TIP 73-295 CHAIN 3/8 TO 4
66-809 NUT DR 9/32 HOLL SHFT 67-901 PLR WIRE STRPR CRMP CUT 8-1/4 69-448 HMR BLL PN 1LB WD HDL 70-503 ALIGNING BAR PINCH 5/8X16 78-404 C-CL THRT DP 4 STD SCREW
66-810 NUT DR 5/16 HOLL SHFT 68-025 PLR RET RNG CONV .038 0D 69-452 HMR BLL PN 2LB WD HDL 70-519 CHSL BAR ROLL1/2X15 BLK (2)
66-811 NUT DR 11/32 HOLL SHFT 68-026 PLR RET RNG CONV .038 45D 69-513 HMR BRS 1.5LB W/GRP 70-865 HCKS FLT FRM 67-407 7" LOCKING PLIERS
66-812 NUT DR 3/8 HOLL SHFT 68-027 PLR RET RNG CONV .038 90D 69-532 HMR DEAD BLOW STD 21OZ 70-950 SCR EXTR 1/8
66-814 NUT DR 7/16 HOLL SHFT 68-028 PLR RET RNG CONV .047 0D 70-000 PUNCH & CHISEL HOLDER 70-952 SCR EXTR 3/16
66-816 NUT DR 1/2 HOLL SHFT 68-029 PLR RET RNG CONV .047 45D 70-103 PNCH PIN 3/32 TIP 70-954 SCR EXTR 15/64
67-067 PLR LNMN 8-1/2 W/GRP 68-030 PLR RET RNG CONV .047 90D 70-105 PNCH PIN 1/8 TIP 70-956 SCR EXTR 5/16
67-161 PLR DIAG CUT 6-3/8 W/GRP 68-031 PLR RET RNG CONV .070 0D 70-109 PNCH PIN 3/16 TIP 70-958 SCR EXTR 3/8
67-305 PLR CHN NSE 6-1/3 SD CUT 68-032 PLR RET RNG CONV .070 45D 70-153 PNCH START 1/16 TIP 70-960 SCR EXTR 15/32
W/GRP 68-033 PLR RET RNG CONV .070 90D 70-157 PNCH START 1/8 TIP 70-962 SCR EXTR 9/16

Set 15-027 164 Pc. Basic Set - Tools Only

10-006 SKT 1/4DR 6PT 3/16 11-326 SKT 3/8DR 12PT 13/16 DP 12-972 RAT 1/2DR 10-1/2 REPL 12-903 25-232 WR COMB 12PT LNG 1 FP 68-255 SNIPS AVN 10 STRT
10-007 SKT 1/4DR 6PT 7/32 11-328 SKT 3/8DR 12PT 7/8 DP 13-128 SKT 3/4DR 12PT 7/8 25-234 WR COMB 12PT LNG 1-1/16 FP 68-310 KNFE UTIL RETRACT
10-008 SKT 1/4DR 6PT 1/4 11-918 HDL FLX 3/8DR 8-1/2 13-130 SKT 3/4DR 12PT 15/16 25-236 WR COMB 12PT LNG 1-1/8 FP 68-445 TP MEAS 1X25 LCK AUTO
10-009 SKT 1/4DR 6PT 9/32 11-922 EXTEN 3/8DR 3 13-132 SKT 3/4DR 12PT 1 25-240 WR COMB 12PT LNG 1-1/4 FP 69-448 HMR BLL PN 1LB WD HDL
10-010 SKT 1/4DR 6PT 5/16 11-927 EXTEN 3/8DR 12 13-134 SKT 3/4DR 12PT 1-1/16 28-406 WR ADJ 6 69-452 HMR BLL PN 2LB WD HDL
10-011 SKT 1/4DR 6PT 11/32 11-935 HDL SPD 3/8DR 16-1/2 13-136 SKT 3/4DR 12PT 1-1/8 28-410 WR ADJ 10 69-532 HMR DEAD BLOW STD 21OZ
10-012 SKT 1/4DR 6PT 3/8 11-947 UNV JNT 3/8DR 13-140 SKT 3/4DR 12PT 1-1/4 28-412 WR ADJ 12 70-000 PUNCH & CHISEL HOLDER

Master Set Contents

10-014 SKT 1/4DR 6PT 7/16 11-972 RAT 3/8DR 7-3/8 REPL 11-903 13-142 SKT 3/4DR 12PT 1-5/16 3470 HOOK & PIN PULLER 70-103 PNCH PIN 3/32 TIP
10-016 SKT 1/4DR 6PT 1/2 12-112 SKT 1/2DR 12PT 3/8 13-144 SKT 3/4DR 12PT 1-3/8 485 GASKET SCRAPER 70-105 PNCH PIN 1/8 TIP
10-018 SKT 1/4DR 6PT 9/16 12-114 SKT 1/2DR 12PT 7/16 13-146 SKT 3/4DR 12PT 1-7/16 56198 7PC BALL PLUS SET 70-109 PNCH PIN 3/16 TIP
10-921 EXTEN 1/4DR 2 12-116 SKT 1/2DR 12PT 1/2 13-148 SKT 3/4DR 12PT 1-1/2 66-150 SCRDR PHLP #2X1-1/2 70-153 PNCH START 1/16 TIP
10-923 EXTEN 1/4DR 6 12-118 SKT 1/2DR 12PT 9/16 13-152 SKT 3/4DR 12PT 1-5/8 66-152 SCRDR PHLP #0X2-1/2 70-157 PNCH START 1/8 TIP
10-943 HDL SPIN 1/4DR 6 12-119 SKT 1/2DR 12PT 19/32 13-156 SKT 3/4DR 12PT 1-3/4 66-153 SCRDR PHLP #1X3 70-161 PNCH START 3/16 TIP
10-947 UNV JNT 1/4DR 12-120 SKT 1/2DR 12PT 5/8 13-158 SKT 3/4DR 12PT 1-13/16 66-156 SCRDR PHLP #2X4 70-235 PNCH CNTR 3/8
10-972 RAT 1/4DR 5-9/32 12-121 SKT 1/2DR 12PT 21/32 13-160 SKT 3/4DR 12PT 1-7/8 66-161 SCRDR PHLP #3X6 70-303 CHSL CLD 5/16 TIP
11-112 SKT 3/8DR 12PT 3/8 12-122 SKT 1/2DR 12PT 11/16 13-164 SKT 3/4DR 12PT 2 66-164 SCRDR PHLP #4X8 70-307 CHSL CLD 7/16 TIP
11-114 SKT 3/8DR 12PT 7/16 12-124 SKT 1/2DR 12PT 3/4 13-918 HDL FLX 3/4DR 22 66-203 SCRDR SLT 3/16X4 SQ 70-309 CHSL CLD 1/2 TIP
11-116 SKT 3/8DR 12PT 1/2 12-125 SKT 1/2DR 12PT 25/32 13-923 EXTEN 3/4DR 8 66-208 SCRDR SLT 1/4X4 SQ 70-393 CHSL CAPE 7/32 TIP
11-118 SKT 3/8DR 12PT 9/16 12-126 SKT 1/2DR 12PT 13/16 13-925 EXTEN 3/4DR 16 66-217 SCRDR SLT 5/16X6 SQ 70-421 CHSL DIA PT 3/16 TIP
11-120 SKT 3/8DR 12PT 5/8 12-128 SKT 1/2DR 12PT 7/8 13-938 HDL T 3/4DR 17-1/2 66-220 SCRDR SLT 3/8X8 SQ 70-503 ALIGNING BAR PINCH 5/8X16
11-122 SKT 3/8DR 12PT 11/16 12-130 SKT 1/2DR 12PT 15/16 13-972 RAT 3/4DR 19 66-226 SCRDR SLT 7/16X12 SQ 70-519 CHSL BAR ROLL1/2X15
11-124 SKT 3/8DR 12PT 3/4 12-132 SKT 1/2DR 12PT 1 25-210 WR COMB 12PT LNG 5/16 FP 66-232 SCRDR SLT 1/4X1-1/2 SQ 70-865 HCKS FLT FRM
11-126 SKT 3/8DR 12PT 13/16 12-134 SKT 1/2DR 12PT 1-1/16 25-212 WR COMB 12PT LNG 3/8 FP 67-067 PLR LNMN 8-1/2 W/GRP 70-950 SCR EXTR 1/8
11-128 SKT 3/8DR 12PT 7/8 12-136 SKT 1/2DR 12PT 1-1/8 25-214 WR COMB 12PT LNG 7/16 FP 67-109 PLR DIAG CUT 7 HD W/GRP 70-952 SCR EXTR 3/16
11-310 SKT 3/8DR 12PT 5/16 DP 12-138 SKT 1/2DR 12PT 1-3/16 25-216 WR COMB 12PT LNG 1/2 FP 67-305 PLR CHN NSE 6-1/3 SD CUT 70-954 SCR EXTR 15/64
11-312 SKT 3/8DR 12PT 3/8 DP 12-140 SKT 1/2DR 12PT 1-1/4 25-218 WR COMB 12PT LNG 9/16 FP W/GRP 70-956 SCR EXTR 5/16
11-314 SKT 3/8DR 12PT 7/16 DP 12-918 HDL FLX 1/2DR 17 25-220 WR COMB 12PT LNG 5/8 FP 67-535 PLR END CUT 7-3/8 W/GRP 70-958 SCR EXTR 3/8
11-316 SKT 3/8DR 12PT 1/2 DP 12-921 EXTEN 1/2DR 2-1/2 25-222 WR COMB 12PT LNG 11/16 FP 67-669 PLR SLP JNT 8 W/GRP 73-014 WR PIPE 14 HD
11-318 SKT 3/8DR 12PT 9/16 DP 12-923 EXTEN 1/2DR 5 25-224 WR COMB 12PT LNG 3/4 FP 67-779 PLR TNG&GRV 10 W/GRP 78-404 C-CL THRT DP 4 STD SCREW
11-320 SKT 3/8DR 12PT 5/8 DP 12-924 EXTEN 1/2DR 10 25-226 WR COMB 12PT LNG 13/16 FP 67-783 PLR TNG&GRV 16 W/GRP BLK (2)
11-322 SKT 3/8DR 12PT 11/16 DP 12-935 HDL SPD 1/2DR 19 25-228 WR COMB 12PT LNG 7/8 FP 67-901 PLR WIRE STRPR CRMP CUT 8-1/4 67-407 7" LOCKING PLIERS
11-324 SKT 3/8DR 12PT 3/4 DP 12-947 UNV JNT 1/2DR 25-230 WR COMB 12PT LNG 15/16 FP 68-065 SET RET RNG PLR LIGHT DUTY

Set 15-032 406 Pc. Master Set - Tools Only

67-410 10" LOCKING PLIERS 11-512 SKT 3/8DR UNV 12PT 3/8 11-882 SKT 3/8DR TRX BIT T40 12-146 SKT 1/2DR 12PT 1-7/16 12-718 SKT 1/2DR HEX BIT 9/16
11-108 SKT 3/8DR 12PT 1/4 11-514 SKT 3/8DR UNV 12PT 7/16 11-884 SKT 3/8DR TRX BIT T45 12-148 SKT 1/2DR 12PT 1-1/2 12-719 SKT 1/2DR HEX BIT 5/8
11-110 SKT 3/8DR 12PT 5/16 11-516 SKT 3/8DR UNV 12PT 1/2 11-886 SKT 3/8DR TRX BIT T50 12-316 SKT 1/2DR 12PT 1/2 DP 12-892 SKT 1/2DR DRAG LNK 7/64
11-112 SKT 3/8DR 12PT 3/8 11-518 SKT 3/8DR UNV 12PT 9/16 11-918 HDL FLX 3/8DR 8-1/2 12-318 SKT 1/2DR 12PT 9/16 DP 12-893 SKT 1/2DR DRAG LNK 3/32
11-114 SKT 3/8DR 12PT 7/16 11-520 SKT 3/8DR UNV 12PT 5/8 11-922 EXTEN 3/8DR 3 12-320 SKT 1/2DR 12PT 5/8 DP 12-918 HDL FLX 1/2DR 17
11-116 SKT 3/8DR 12PT 1/2 11-522 SKT 3/8DR UNV 12PT 11/16 11-923 EXTEN 3/8DR 6 12-322 SKT 1/2DR 12PT 11/16 DP 12-921 EXTEN 1/2DR 2-1/2
11-118 SKT 3/8DR 12PT 9/16 11-524 SKT 3/8DR UNV 12PT 3/4 11-927 EXTEN 3/8DR 12 12-324 SKT 1/2DR 12PT 3/4 DP 12-923 EXTEN 1/2DR 5
11-120 SKT 3/8DR 12PT 5/8 11-708 SKT 3/8DR HEX BIT 1/8 11-929 EXTEN FLX 3/8DR 7-1/4 12-326 SKT 1/2DR 12PT 13/16 DP 12-924 EXTEN 1/2DR 10
11-122 SKT 3/8DR 12PT 11/16 11-710 SKT 3/8DR HEX BIT 5/32 11-935 HDL SPD 3/8DR 16-1/2 12-328 SKT 1/2DR 12PT 7/8 DP 12-935 HDL SPD 1/2DR 19
11-124 SKT 3/8DR 12PT 3/4 11-711 SKT 3/8DR HEX BIT 3/16 11-938 HDL T 3/8DR 8 12-330 SKT 1/2DR 12PT 15/16 DP 12-938 HDL T 1/2DR 11
11-126 SKT 3/8DR 12PT 13/16 11-712 SKT 3/8DR HEX BIT 7/32 11-947 UNV JNT 3/8DR 12-332 SKT 1/2DR 12PT 1 DP 12-944 ADP RAT 1/2DR
11-128 SKT 3/8DR 12PT 7/8 11-713 SKT 3/8DR HEX BIT 1/4 11-972 RAT 3/8DR 7-3/8 REPL 11-903 12-334 SKT 1/2DR 12PT 1-1/16 DP 12-947 UNV JNT 1/2DR
11-130 SKT 3/8DR 12PT 15/16 11-714 SKT 3/8DR HEX BIT 5/16 11-974 RAT 3/8DR FLX 9-1/2 12-336 SKT 1/2DR 12PT 1-1/8 DP 12-951 ADP 1/2 F. 3/8 M.
11-132 SKT 3/8DR 12PT 1 11-715 SKT 3/8DR HEX BIT 3/8 12-112 SKT 1/2DR 12PT 3/8 12-340 SKT 1/2DR 12PT 1-1/4 DP 12-972 RAT 1/2DR 10-1/2 REPL 12-903
11-308 SKT 3/8DR 12PT 1/4 DP 11-802 SKT 3/8DR SLT BIT 1/4 12-114 SKT 1/2DR 12PT 7/16 12-412 SKT 1/2DR 8PT 3/8 12-973 RAT 1/2DR 15 REPL 12-904
11-310 SKT 3/8DR 12PT 5/16 DP 11-822 SKT 3/8DR PHLP BIT #2 12-116 SKT 1/2DR 12PT 1/2 12-414 SKT 1/2DR 8PT 7/16 12-974 RAT 1/2DR FLX 14-1/4
11-312 SKT 3/8DR 12PT 3/8 DP 11-825 SKT 3/8DR PHLP BIT #3 12-118 SKT 1/2DR 12PT 9/16 12-416 SKT 1/2DR 8PT 1/2 13-128 SKT 3/4DR 12PT 7/8
11-314 SKT 3/8DR 12PT 7/16 DP 11-828 SKT 3/8DR PHLP BIT #4 12-119 SKT 1/2DR 12PT 19/32 12-418 SKT 1/2DR 8PT 9/16 13-130 SKT 3/4DR 12PT 15/16
11-316 SKT 3/8DR 12PT 1/2 DP 11-850 WR 3/8DR CRFT 3/8 12-120 SKT 1/2DR 12PT 5/8 12-420 SKT 1/2DR 8PT 5/8 13-132 SKT 3/4DR 12PT 1
11-318 SKT 3/8DR 12PT 9/16 DP 11-851 WR 3/8DR CRFT 7/16 12-122 SKT 1/2DR 12PT 11/16 12-422 SKT 1/2DR 8PT 11/16 13-134 SKT 3/4DR 12PT 1-1/16
11-320 SKT 3/8DR 12PT 5/8 DP 11-852 WR 3/8DR CRFT 1/2 12-124 SKT 1/2DR 12PT 3/4 12-424 SKT 1/2DR 8PT 3/4 13-136 SKT 3/4DR 12PT 1-1/8
11-322 SKT 3/8DR 12PT 11/16 DP 11-853 WR 3/8DR CRFT 9/16 12-125 SKT 1/2DR 12PT 25/32 12-426 SKT 1/2DR 8PT 13/16 13-138 SKT 3/4DR 12PT 1-3/16
11-324 SKT 3/8DR 12PT 3/4 DP 11-854 WR 3/8DR CRFT 5/8 12-126 SKT 1/2DR 12PT 13/16 12-428 SKT 1/2DR 8PT 7/8 13-140 SKT 3/4DR 12PT 1-1/4
11-326 SKT 3/8DR 12PT 13/16 DP 11-855 WR 3/8DR CRFT 11/16 12-128 SKT 1/2DR 12PT 7/8 12-432 SKT 1/2DR 8PT 1 13-142 SKT 3/4DR 12PT 1-5/16
11-328 SKT 3/8DR 12PT 7/8 DP 11-856 WR 3/8DR CRFT 3/4 12-130 SKT 1/2DR 12PT 15/16 12-516 SKT 1/2DR UNV 12PT 1/2 13-144 SKT 3/4DR 12PT 1-3/8
11-330 SKT 3/8DR 12PT 15/16 DP 11-857 WR 3/8DR CRFT 13/16 12-132 SKT 1/2DR 12PT 1 12-518 SKT 1/2DR UNV 12PT 9/16 13-146 SKT 3/4DR 12PT 1-7/16
11-332 SKT 3/8DR 12PT 1 DP 11-858 WR 3/8DR CRFT 7/8 12-134 SKT 1/2DR 12PT 1-1/16 12-520 SKT 1/2DR UNV 12PT 5/8 13-148 SKT 3/4DR 12PT 1-1/2
11-408 SKT 3/8DR 8PT 1/4 11-872 SKT 3/8DR TRX BIT T15 12-136 SKT 1/2DR 12PT 1-1/8 12-713 SKT 1/2DR HEX BIT 1/4 13-150 SKT 3/4DR 12PT 1-9/16
11-410 SKT 3/8DR 8PT 5/16 11-874 SKT 3/8DR TRX BIT T20 12-138 SKT 1/2DR 12PT 1-3/16 12-714 SKT 1/2DR HEX BIT 5/16 13-152 SKT 3/4DR 12PT 1-5/8
11-412 SKT 3/8DR 8PT 3/8 11-876 SKT 3/8DR TRX BIT T25 12-140 SKT 1/2DR 12PT 1-1/4 12-715 SKT 1/2DR HEX BIT 3/8 13-154 SKT 3/4DR 12PT 1-11/16
11-414 SKT 3/8DR 8PT 7/16 11-878 SKT 3/8DR TRX BIT T27 12-142 SKT 1/2DR 12PT 1-5/16 12-716 SKT 1/2DR HEX BIT 7/16 13-156 SKT 3/4DR 12PT 1-3/4
11-416 SKT 3/8DR 8PT 1/2 11-880 SKT 3/8DR TRX BIT T30 12-144 SKT 1/2DR 12PT 1-3/8 12-717 SKT 1/2DR HEX BIT 1/2 Continued . . .

A-8
 A
Master Set Contents
Set 15-032 406 Pc. Master Set Cont.
13-158 SKT 3/4DR 12PT 1-13/16 25-522 WR COMB FLX HD 12PT 11/16 FP 28-314 WR RAT FLR NUT 12PT 7/16 67-067 PLR LNMN 8-1/2 W/GRP 70-129 PNCH PIN 7/32 TIP
13-160 SKT 3/4DR 12PT 1-7/8 25-524 WR COMB FLX HD 12PT 3/4 FP 28-316 WR RAT FLR NUT 12PT 1/2 67-109 PLR DIAG CUT 7 HD W/GRP 70-131 PNCH PIN 1/4 TIP
13-164 SKT 3/4DR 12PT 2 26-022 WR OE 1/4X5/16 FP 28-318 WR RAT FLR NUT 12PT 9/16 67-161 PLR DIAG CUT 6-3/8 W/GRP 70-155 PNCH START 3/32 TIP
13-168 SKT 3/4DR 12PT 2-1/8 26-043 WR OE 3/8X7/16 FP 28-320 WR RAT FLR NUT 12PT 5/8 67-305 PLR CHN NSE 6-1/3 SD CUT 70-157 PNCH START 1/8 TIP
13-170 SKT 3/4DR 12PT 2-3/16 26-067 WR OE 1/2X9/16 FP 28-322 WR RAT FLR NUT 12PT 11/16 W/GRP 70-161 PNCH START 3/16 TIP
13-172 SKT 3/4DR 12PT 2-1/4 26-094 WR OE 5/8X11/16 FP 28-324 WR RAT FLR NUT 12PT 3/4 67-357 PLR NDL NSE 5-7/16 W/GRP 70-163 PNCH START 7/32 TIP
13-176 SKT 3/4DR 12PT 2-3/8 26-121 WR OE 3/4X13/16 FP 28-408 WR ADJ 8 67-401 PLR NDL NSE 5-7/8 CURV 70-165 PNCH START 1/4 TIP
13-918 HDL FLX 3/4DR 22 26-139 WR OE 7/8X15/16 FP 28-410 WR ADJ 10 W/GRP 70-189 PNCH DRFT 1/8 TIP
13-922 EXTEN 3/4DR 5 26-163 WR OE 1X1-1/8 FP 28-412 WR ADJ 12 67-503 PLR DKBL 8 W/GRP 70-193 PNCH DRFT 3/16 TIP
13-923 EXTEN 3/4DR 8 26-169 WR OE 1-1/16X1-1/4 FP 28-415 WR ADJ 15 67-535 PLR END CUT 7-3/8 W/GRP 70-197 PNCH DRFT 1/4 TIP
13-925 EXTEN 3/4DR 16 26-187 WR OE 1-5/16X1-1/2 FP 3470 HOOK & PIN PULLER 67-667 PLR SLP JNT 6-1/2 W/GRP 70-235 PNCH CNTR 3/8
13-938 HDL T 3/4DR 17-1/2 26-190 WR OE 1-3/8X1-7/16 FP 485 GASKET SCRAPER 67-669 PLR SLP JNT 8 W/GRP 70-239 PNCH CNTR 1/2
13-947 UNV JNT 3/4DR 27-143 WR BX 12PT SHT 3/8X7/16 FP 56131 6 PC T-HDLE BALL PLUS 67-717 PLR TNG&GRV 5 W/GRP 70-255 PNCH PRCK 3/8
13-972 RAT 3/4DR 19 27-167 WR BX 12PT SHT 1/2X9/16 FP 56193 13 PC BALL PLUS SET 67-777 PLR TNG&GRV 6 W/GRP 70-301 CHSL CLD 1/4 TIP
2425 SCRAPER 27-194 WR BX 12PT SHT 5/8X11/16 FP 64-086 WR TRQ 1/2DR 25-250 FT/LB 67-779 PLR TNG&GRV 10 W/GRP 70-303 CHSL CLD 5/16 TIP
25-004 WR COMB 6PT SHT 1/8 FP 27-206 WR BX 12PT SHT 11/16X3/4 FP 66-150 SCRDR PHLP #2X1-1/2 67-783 PLR TNG&GRV 16 W/GRP 70-305 CHSL CLD 3/8 TIP
25-005 WR COMB 6PT SHT 5/32 FP 27-343 WR BX 12PT LNG 3/8X7/16 FP 66-152 SCRDR PHLP #0X2-1/2 67-901 PLR WIRE STRPR CRMP CUT 8-1/4 70-309 CHSL CLD 1/2 TIP
25-006 WR COMB 6PT SHT 3/16 FP 27-367 WR BX 12PT LNG 1/2X9/16 FP 66-153 SCRDR PHLP #1X3 68-025 PLR RET RNG CONV .038 0D 70-311 CHSL CLD 5/8 TIP
25-008 WR COMB 6PT SHT 1/4 FP 27-394 WR BX 12PT LNG 5/8X11/16 FP 66-155 SCRDR PHLP #1X6 68-026 PLR RET RNG CONV .038 45D 70-313 CHSL CLD 3/4 TIP
25-009 WR COMB 6PT SHT 9/32 FP 27-424 WR BX 12PT LNG 3/4X7/8 FP 66-156 SCRDR PHLP #2X4 68-027 PLR RET RNG CONV .038 90D 70-315 CHSL CLD 7/8 TIP
25-010 WR COMB 6PT SHT 5/16 FP 27-451 WR BX 12PT LNG 15/16X1 FP 66-158 SCRDR PHLP #2X8 68-028 PLR RET RNG CONV .047 0D 70-317 CHSL CLD 1 TIP
25-011 WR COMB 6PT SHT 11/32 FP 27-466 WR BX 12PT LNG 1-1/16X1-1/8 FP 66-161 SCRDR PHLP #3X6 68-029 PLR RET RNG CONV .047 45D 70-319 CHSL CLD 1-1/8 TIP
25-012 WR COMB 6PT SHT 3/8 FP 27-510 WR GEARED BOX 12PT 3/8 FP 66-164 SCRDR PHLP #4X8 68-030 PLR RET RNG CONV .047 90D 70-503 ALIGNING BAR PINCH 5/8X16
25-210 WR COMB 12PT LNG 5/16 FP 27-511 WR GEARED BOX 12PT 7/16 FP 66-203 SCRDR SLT 3/16X4 SQ 68-031 PLR RET RNG CONV .070 0D 70-505 ALIGNING BAR PINCH 3/4X24
25-212 WR COMB 12PT LNG 3/8 FP 27-512 WR GEARED BOX 12PT 1/2 FP 66-208 SCRDR SLT 1/4X4 SQ 68-032 PLR RET RNG CONV .070 45D 70-519 CHSL BAR ROLL1/2X15
25-214 WR COMB 12PT LNG 7/16 FP 27-513 WR GEARED BOX 12PT 9/16 FP 66-217 SCRDR SLT 5/16X6 SQ 68-033 PLR RET RNG CONV .070 90D 70-521 CHSL BAR ROLL 5/8X18
25-216 WR COMB 12PT LNG 1/2 FP 27-514 WR GEARED BOX 12PT 5/8 FP 66-220 SCRDR SLT 3/8X8 SQ 68-034 PLR RET RNG CONV .090 0D 70-865 HCKS FLT FRM
25-218 WR COMB 12PT LNG 9/16 FP 27-515 WR GEARED BOX 12PT 11/16 FP 66-226 SCRDR SLT 7/16X12 SQ 68-035 PLR RET RNG CONV .090 45D 70-929 TELESCP MIRROR 2-1/8 DIA
25-220 WR COMB 12PT LNG 5/8 FP 27-516 WR GEARED BOX 12PT 3/4 FP 66-232 SCRDR SLT 1/4X1-1/2 SQ 68-036 PLR RET RNG CONV .090 90D 70-933 RETR TL MAG TELESCP
25-222 WR COMB 12PT LNG 11/16 FP 27-904 WR ANG OE 15/64 MDGT 66-253 SCRDR CAB 1/8X3 68-241 SNIPS MINI 6-1/2 70-950 SCR EXTR 1/8
Master Set Contents

25-224 WR COMB 12PT LNG 3/4 FP 15&75D FP 66-255 SCRDR CAB 1/8X4 68-255 SNIPS AVN 10 STRT 70-952 SCR EXTR 3/16
25-226 WR COMB 12PT LNG 13/16 FP 27-907 WR ANG OE 7/32 MDGT 15&75D FP 66-259 SCRDR CAB 1/8X8 68-275 SNIPS STRT 12-3/4 70-954 SCR EXTR 15/64
25-228 WR COMB 12PT LNG 7/8 FP 27-908 WR ANG OE 1/4 MDGT 15&75D FP 66-262 SCRDR CAB 3/16X4 68-310 KNFE UTIL RETRACT 70-956 SCR EXTR 5/16
25-230 WR COMB 12PT LNG 15/16 FP 27-909 WR ANG OE 9/32 MDGT 15&75D FP 66-268 SCRDR CAB 3/16X8 68-445 TP MEAS 1X25 LCK AUTO 70-958 SCR EXTR 3/8
25-232 WR COMB 12PT LNG 1 FP 27-910 WR ANG OE 5/16 MDGT 15&75D FP 66-806 NUT DR 3/16 HOLL SHFT 69-444 HMR BLL PN 8OZ WD HDL 70-960 SCR EXTR 15/32
25-234 WR COMB 12PT LNG 1-1/16 FP 27-911 WR ANG OE 11/32 MDGT 15&75D FP 66-807 NUT DR 7/32 HOLL SHFT 69-448 HMR BLL PN 1LB WD HDL 70-962 SCR EXTR 9/16
25-236 WR COMB 12PT LNG 1-1/8 FP 27-912 WR ANG OE 3/8 MDGT 15&75D FP 66-808 NUT DR 1/4 HOLL SHFT 69-452 HMR BLL PN 2LB WD HDL 70-964 SCR EXTR 21/32
25-240 WR COMB 12PT LNG 1-1/4 FP 27-914 WR ANG OE 7/16 MDGT 15&75D FP 66-809 NUT DR 9/32 HOLL SHFT 69-490 RBR MALL 32OZ 16-1/2 70-966 SCR EXTR 13/16
25-242 WR COMB 12PT LNG 1-5/16 27-916 WR ANG OE 1/2 MDGT 15&75D FP 66-810 NUT DR 5/16 HOLL SHFT 69-513 HMR BRS 1.5LB W/GRP 72-441 PULLER CONE 2/3 JAW
25-244 WR COMB 12PT LNG 1-3/8 28-212 WR COMB FLR NUT 6PT 3/8 FP 66-811 NUT DR 11/32 HOLL SHFT 69-532 HMR DEAD BLOW STD 21OZ 73-010 WR PIPE 10 HD
25-246 WR COMB 12PT LNG 1-7/16 28-214 WR COMB FLR NUT 6PT 7/16 FP 66-812 NUT DR 3/8 HOLL SHFT 69-534 HMR DEAD BLOW STD 52OZ 73-014 WR PIPE 14 HD
25-248 WR COMB 12PT LNG 1-1/2 28-216 WR COMB FLR NUT 6PT 1/2 FP 66-814 NUT DR 7/16 HOLL SHFT 67-436 6" LOCKING PLIERS 73-018 WR PIPE 18 HD
25-512 WR COMB FLX HD 12PT 3/8 FP 28-218 WR COMB FLR NUT 6PT 9/16 FP 66-816 NUT DR 1/2 HOLL SHFT 70-000 PUNCH & CHISEL HOLDER 73-295 CHAIN 3/8 TO 4
25-514 WR COMB FLX HD 12PT 7/16 FP 28-220 WR COMB FLR NUT 6PT 5/8 FP 66-818 NUT DR 9/16 HOLL SHFT 70-103 PNCH PIN 3/32 TIP 78-404 C-CL THRT DP 4 STD SCREW
25-516 WR COMB FLX HD 12PT 1/2 FP 28-222 WR COMB FLR NUT 6PT 11/16 FP 66-820 NUT DR 5/8 HOLL SHFT 70-105 PNCH PIN 1/8 TIP BLK (2)
25-518 WR COMB FLX HD 12PT 9/16 FP 28-224 WR COMB FLR NUT 6PT 3/4 FP 66-924 SCR START SLT 5 70-107 PNCH PIN 5/32 TIP 67-407 7" LOCKING PLIERS
25-520 WR COMB FLX HD 12PT 5/8 FP 28-312 WR RAT FLR NUT 12PT 3/8 66-933 SCR START PHLP 5 70-109 PNCH PIN 3/16 TIP

Set 15-037 248 Pc. Intermediate Set - Tools Only

67-410 10" LOCKING PLIERS 11-972 RAT 3/8DR 7-3/8 REPL 11-903 13-134 SKT 3/4DR 12PT 1-1/16 26-079 WR OE 9/16X5/8 FP 66-217 SCRDR SLT 5/16X6 SQ
11-112 SKT 3/8DR 12PT 3/8 12-112 SKT 1/2DR 12PT 3/8 13-136 SKT 3/4DR 12PT 1-1/8 26-097 WR OE 5/8X3/4 FP 66-220 SCRDR SLT 3/8X8 SQ
11-114 SKT 3/8DR 12PT 7/16 12-114 SKT 1/2DR 12PT 7/16 13-140 SKT 3/4DR 12PT 1-1/4 26-106 WR OE 11/16X3/4 FP 66-226 SCRDR SLT 7/16X12 SQ
11-116 SKT 3/8DR 12PT 1/2 12-116 SKT 1/2DR 12PT 1/2 13-142 SKT 3/4DR 12PT 1-5/16 26-133 WR OE 13/16X7/8 FP 66-232 SCRDR SLT 1/4X1-1/2 SQ
11-118 SKT 3/8DR 12PT 9/16 12-118 SKT 1/2DR 12PT 9/16 13-144 SKT 3/4DR 12PT 1-3/8 26-151 WR OE 15/16X1 FP 66-806 NUT DR 3/16 HOLL SHFT
11-120 SKT 3/8DR 12PT 5/8 12-120 SKT 1/2DR 12PT 5/8 13-146 SKT 3/4DR 12PT 1-7/16 26-166 WR OE 1-1/16X1-1/8 FP 66-807 NUT DR 7/32 HOLL SHFT
11-122 SKT 3/8DR 12PT 11/16 12-122 SKT 1/2DR 12PT 11/16 13-148 SKT 3/4DR 12PT 1-1/2 27-143 WR BX 12PT SHT 3/8X7/16 FP 66-808 NUT DR 1/4 HOLL SHFT
11-124 SKT 3/8DR 12PT 3/4 12-124 SKT 1/2DR 12PT 3/4 13-152 SKT 3/4DR 12PT 1-5/8 27-167 WR BX 12PT SHT 1/2X9/16 FP 66-809 NUT DR 9/32 HOLL SHFT
11-126 SKT 3/8DR 12PT 13/16 12-126 SKT 1/2DR 12PT 13/16 13-156 SKT 3/4DR 12PT 1-3/4 27-194 WR BX 12PT SHT 5/8X11/16 FP 66-810 NUT DR 5/16 HOLL SHFT
11-128 SKT 3/8DR 12PT 7/8 12-128 SKT 1/2DR 12PT 7/8 13-158 SKT 3/4DR 12PT 1-13/16 27-206 WR BX 12PT SHT 11/16X3/4 FP 66-811 NUT DR 11/32 HOLL SHFT
11-312 SKT 3/8DR 12PT 3/8 DP 12-130 SKT 1/2DR 12PT 15/16 13-160 SKT 3/4DR 12PT 1-7/8 27-510 WR GEARED BOX 12PT 3/8 FP 66-812 NUT DR 3/8 HOLL SHFT
11-314 SKT 3/8DR 12PT 7/16 DP 12-132 SKT 1/2DR 12PT 1 13-164 SKT 3/4DR 12PT 2 27-511 WR GEARED BOX 12PT 7/16 FP 66-814 NUT DR 7/16 HOLL SHFT
11-316 SKT 3/8DR 12PT 1/2 DP 12-134 SKT 1/2DR 12PT 1-1/16 13-918 HDL FLX 3/4DR 22 27-512 WR GEARED BOX 12PT 1/2 FP 66-816 NUT DR 1/2 HOLL SHFT
11-318 SKT 3/8DR 12PT 9/16 DP 12-136 SKT 1/2DR 12PT 1-1/8 13-923 EXTEN 3/4DR 8 27-513 WR GEARED BOX 12PT 9/16 FP 67-067 PLR LNMN 8-1/2 W/GRP
11-320 SKT 3/8DR 12PT 5/8 DP 12-140 SKT 1/2DR 12PT 1-1/4 13-925 EXTEN 3/4DR 16 27-514 WR GEARED BOX 12PT 5/8 FP 67-109 PLR DIAG CUT 7 HD W/GRP
11-322 SKT 3/8DR 12PT 11/16 DP 12-316 SKT 1/2DR 12PT 1/2 DP 13-938 HDL T 3/4DR 17-1/2 27-515 WR GEARED BOX 12PT 11/16 FP 67-161 PLR DIAG CUT 6-3/8 W/GRP
11-324 SKT 3/8DR 12PT 3/4 DP 12-318 SKT 1/2DR 12PT 9/16 DP 13-972 RAT 3/4DR 19 27-516 WR GEARED BOX 12PT 3/4 FP 67-305 PLR CHN NSE 6-1/3 SD CUT
11-326 SKT 3/8DR 12PT 13/16 DP 12-320 SKT 1/2DR 12PT 5/8 DP 25-210 WR COMB 12PT LNG 5/16 FP 28-212 WR COMB FLR NUT 6PT 3/8 FP W/GRP
11-328 SKT 3/8DR 12PT 7/8 DP 12-322 SKT 1/2DR 12PT 11/16 DP 25-212 WR COMB 12PT LNG 3/8 FP 28-214 WR COMB FLR NUT 6PT 7/16 FP 67-401 PLR NDL NSE 5-7/8 CURV
11-408 SKT 3/8DR 8PT 1/4 12-324 SKT 1/2DR 12PT 3/4 DP 25-214 WR COMB 12PT LNG 7/16 FP 28-216 WR COMB FLR NUT 6PT 1/2 FP W/GRP
11-410 SKT 3/8DR 8PT 5/16 12-326 SKT 1/2DR 12PT 13/16 DP 25-216 WR COMB 12PT LNG 1/2 FP 28-218 WR COMB FLR NUT 6PT 9/16 FP 67-503 PLR DKBL 8 W/GRP
11-412 SKT 3/8DR 8PT 3/8 12-328 SKT 1/2DR 12PT 7/8 DP 25-218 WR COMB 12PT LNG 9/16 FP 28-220 WR COMB FLR NUT 6PT 5/8 FP 67-535 PLR END CUT 7-3/8 W/GRP
11-514 SKT 3/8DR UNV 12PT 7/16 12-330 SKT 1/2DR 12PT 15/16 DP 25-220 WR COMB 12PT LNG 5/8 FP 28-222 WR COMB FLR NUT 6PT 11/16 FP 67-669 PLR SLP JNT 8 W/GRP
11-516 SKT 3/8DR UNV 12PT 1/2 12-332 SKT 1/2DR 12PT 1 DP 25-222 WR COMB 12PT LNG 11/16 FP 28-224 WR COMB FLR NUT 6PT 3/4 FP 67-779 PLR TNG&GRV 10 W/GRP
11-518 SKT 3/8DR UNV 12PT 9/16 12-334 SKT 1/2DR 12PT 1-1/16 DP 25-224 WR COMB 12PT LNG 3/4 FP 28-408 WR ADJ 8 67-783 PLR TNG&GRV 16 W/GRP
11-520 SKT 3/8DR UNV 12PT 5/8 12-336 SKT 1/2DR 12PT 1-1/8 DP 25-226 WR COMB 12PT LNG 13/16 FP 28-410 WR ADJ 10 67-901 PLR WIRE STRPR CRMP CUT 8-1/4
11-524 SKT 3/8DR UNV 12PT 3/4 12-340 SKT 1/2DR 12PT 1-1/4 DP 25-228 WR COMB 12PT LNG 7/8 FP 28-412 WR ADJ 12 68-025 PLR RET RNG CONV .038 0D
11-708 SKT 3/8DR HEX BIT 1/8 12-717 SKT 1/2DR HEX BIT 1/2 25-230 WR COMB 12PT LNG 15/16 FP 28-415 WR ADJ 15 68-026 PLR RET RNG CONV .038 45D
11-710 SKT 3/8DR HEX BIT 5/32 12-718 SKT 1/2DR HEX BIT 9/16 25-232 WR COMB 12PT LNG 1 FP 3470 HOOK & PIN PULLER 68-027 PLR RET RNG CONV .038 90D
11-711 SKT 3/8DR HEX BIT 3/16 12-719 SKT 1/2DR HEX BIT 5/8 25-234 WR COMB 12PT LNG 1-1/16 FP 485 GASKET SCRAPER 68-028 PLR RET RNG CONV .047 0D
11-712 SKT 3/8DR HEX BIT 7/32 12-918 HDL FLX 1/2DR 17 25-236 WR COMB 12PT LNG 1-1/8 FP 56196 12 PC BALL PLUS SET 68-029 PLR RET RNG CONV .047 45D
11-713 SKT 3/8DR HEX BIT 1/4 12-921 EXTEN 1/2DR 2-1/2 25-240 WR COMB 12PT LNG 1-1/4 FP 64-086 WR TRQ 1/2DR 25-250 FT/LB 68-030 PLR RET RNG CONV .047 90D
11-714 SKT 3/8DR HEX BIT 5/16 12-923 EXTEN 1/2DR 5 25-242 WR COMB 12PT LNG 1-5/16 66-150 SCRDR PHLP #2X1-1/2 68-031 PLR RET RNG CONV .070 0D
11-715 SKT 3/8DR HEX BIT 3/8 12-924 EXTEN 1/2DR 10 25-244 WR COMB 12PT LNG 1-3/8 66-152 SCRDR PHLP #0X2-1/2 68-032 PLR RET RNG CONV .070 45D
11-918 HDL FLX 3/8DR 8-1/2 12-935 HDL SPD 1/2DR 19 25-246 WR COMB 12PT LNG 1-7/16 66-153 SCRDR PHLP #1X3 68-033 PLR RET RNG CONV .070 90D
11-922 EXTEN 3/8DR 3 12-947 UNV JNT 1/2DR 25-248 WR COMB 12PT LNG 1-1/2 66-156 SCRDR PHLP #2X4 68-034 PLR RET RNG CONV .090 0D
11-923 EXTEN 3/8DR 6 12-972 RAT 1/2DR 10-1/2 REPL 12-903 26-022 WR OE 1/4X5/16 FP 66-161 SCRDR PHLP #3X6 68-035 PLR RET RNG CONV .090 45D
11-927 EXTEN 3/8DR 12 13-128 SKT 3/4DR 12PT 7/8 26-034 WR OE 5/16X3/8 FP 66-164 SCRDR PHLP #4X8 68-036 PLR RET RNG CONV .090 90D
11-935 HDL SPD 3/8DR 16-1/2 13-130 SKT 3/4DR 12PT 15/16 26-058 WR OE 7/16X1/2 FP 66-203 SCRDR SLT 3/16X4 SQ 68-241 SNIPS MINI 6-1/2
11-947 UNV JNT 3/8DR 13-132 SKT 3/4DR 12PT 1 26-067 WR OE 1/2X9/16 FP 66-208 SCRDR SLT 1/4X4 SQ Continued . . .

A-9
 A
Master Set Contents
Set 15-037 248 Pc. Intermediate Set Cont.
68-255 SNIPS AVN 10 STRT 70-105 PNCH PIN 1/8 TIP 70-393 CHSL CAPE 7/32 TIP 70-958 SCR EXTR 3/8 73-295 CHAIN 3/8 TO 4
68-310 KNFE UTIL RETRACT 70-109 PNCH PIN 3/16 TIP 70-421 CHSL DIA PT 3/16 TIP 70-960 SCR EXTR 15/32 78-404 C-CL THRT DP 4 STD BLK (2)
68-445 TP MEAS 1X25 LCK AUTO 70-153 PNCH START 1/16 TIP 70-503 ALIGNING BAR PINCH 5/8X16 70-962 SCR EXTR 9/16 78-406 C-CL THRT DP 6 STD BLK (2)
69-448 HMR BLL PN 1LB WD HDL 70-157 PNCH START 1/8 TIP 70-519 CHSL BAR ROLL1/2X15 70-964 SCR EXTR 21/32 67-407 7" LOCKING PLIERS
69-452 HMR BLL PN 2LB WD HDL 70-161 PNCH START 3/16 TIP 70-865 HCKS FLT FRM 70-966 SCR EXTR 13/16
69-513 HMR BRS 1.5LB W/GRP 70-235 PNCH CNTR 3/8 70-950 SCR EXTR 1/8 72-441 PULLER CONE 2/3JAW
69-532 HMR DEAD BLOW STD 21OZ 70-303 CHSL CLD 5/16 TIP 70-952 SCR EXTR 3/16 73-010 WR PIPE 10 HD
70-000 PUNCH & CHISEL HOLDER 70-307 CHSL CLD 7/16 TIP 70-954 SCR EXTR 15/64 73-014 WR PIPE 14 HD
70-103 PNCH PIN 3/32 TIP 70-309 CHSL CLD 1/2 TIP 70-956 SCR EXTR 5/16 73-018 WR PIPE 18 HD

Set 15-042 148 Pc. Basic Mechanics Set - Tools Only

67-410 10" LOCKING PLIERS 12-118 SKT 1/2DR 12PT 9/16 13-142 SKT 3/4DR 12PT 1-5/16 28-410 WR ADJ 10 69-448 HMR BLL PN 1LB WD HDL
11-112 SKT 3/8DR 12PT 3/8 12-119 SKT 1/2DR 12PT 19/32 13-144 SKT 3/4DR 12PT 1-3/8 28-412 WR ADJ 12 69-452 HMR BLL PN 2LB WD HDL
11-114 SKT 3/8DR 12PT 7/16 12-120 SKT 1/2DR 12PT 5/8 13-146 SKT 3/4DR 12PT 1-7/16 28-415 WR ADJ 15 69-532 HMR DEAD BLOW STD 21OZ
11-116 SKT 3/8DR 12PT 1/2 12-121 SKT 1/2DR 12PT 21/32 13-148 SKT 3/4DR 12PT 1-1/2 485 GASKET SCRAPER 70-000 PUNCH & CHISEL HOLDER
11-118 SKT 3/8DR 12PT 9/16 12-122 SKT 1/2DR 12PT 11/16 13-152 SKT 3/4DR 12PT 1-5/8 56198 7 PC BALL PLUS SET 70-103 PNCH PIN 3/32 TIP
11-120 SKT 3/8DR 12PT 5/8 12-124 SKT 1/2DR 12PT 3/4 13-156 SKT 3/4DR 12PT 1-3/4 66-150 SCRDR PHLP #2X1-1/2 70-105 PNCH PIN 1/8 TIP
11-122 SKT 3/8DR 12PT 11/16 12-125 SKT 1/2DR 12PT 25/32 13-158 SKT 3/4DR 12PT 1-13/16 66-152 SCRDR PHLP #0X2-1/2 70-109 PNCH PIN 3/16 TIP
11-124 SKT 3/8DR 12PT 3/4 12-126 SKT 1/2DR 12PT 13/16 13-160 SKT 3/4DR 12PT 1-7/8 66-153 SCRDR PHLP #1X3 70-153 PNCH START 1/16 TIP
11-126 SKT 3/8DR 12PT 13/16 12-128 SKT 1/2DR 12PT 7/8 13-164 SKT 3/4DR 12PT 2 66-156 SCRDR PHLP #2X4 70-157 PNCH START 1/8 TIP
11-128 SKT 3/8DR 12PT 7/8 12-130 SKT 1/2DR 12PT 15/16 13-918 HDL FLX 3/4DR 22 66-161 SCRDR PHLP #3X6 70-161 PNCH START 3/16 TIP
11-310 SKT 3/8DR 12PT 5/16 DP 12-132 SKT 1/2DR 12PT 1 13-923 EXTEN 3/4DR 8 66-164 SCRDR PHLP #4X8 70-235 PNCH CNTR 3/8
11-312 SKT 3/8DR 12PT 3/8 DP 12-134 SKT 1/2DR 12PT 1-1/16 13-925 EXTEN 3/4DR 16 66-203 SCRDR SLT 3/16X4 SQ 70-303 CHSL CLD 5/16 TIP
11-314 SKT 3/8DR 12PT 7/16 DP 12-136 SKT 1/2DR 12PT 1-1/8 13-938 HDL T 3/4DR 17-1/2 66-208 SCRDR SLT 1/4X4 SQ 70-307 CHSL CLD 7/16 TIP
11-316 SKT 3/8DR 12PT 1/2 DP 12-138 SKT 1/2DR 12PT 1-3/16 13-972 RAT 3/4DR 19 66-217 SCRDR SLT 5/16X6 SQ 70-309 CHSL CLD 1/2 TIP
11-318 SKT 3/8DR 12PT 9/16 DP 12-140 SKT 1/2DR 12PT 1-1/4 25-210 WR COMB 12PT LNG 5/16 FP 66-220 SCRDR SLT 3/8X8 SQ 70-393 CHSL CAPE 7/32 TIP
11-320 SKT 3/8DR 12PT 5/8 DP 12-918 HDL FLX 1/2DR 17 25-212 WR COMB 12PT LNG 3/8 FP 66-226 SCRDR SLT 7/16X12 SQ 70-421 CHSL DIA PT 3/16 TIP

Master Set Contents

11-322 SKT 3/8DR 12PT 11/16 DP 12-921 EXTEN 1/2DR 2-1/2 25-214 WR COMB 12PT LNG 7/16 FP 66-232 SCRDR SLT 1/4X1-1/2 SQ 70-503 ALIGNING BAR PINCH 5/8X16
11-324 SKT 3/8DR 12PT 3/4 DP 12-923 EXTEN 1/2DR 5 25-216 WR COMB 12PT LNG 1/2 FP 67-067 PLR LNMN 8-1/2 W/GRP 70-519 CHSL BAR ROLL1/2X15
11-326 SKT 3/8DR 12PT 13/16 DP 12-924 EXTEN 1/2DR 10 25-218 WR COMB 12PT LNG 9/16 FP 67-109 PLR DIAG CUT 7 HD W/GRP 70-865 HCKS FLT FRM
11-328 SKT 3/8DR 12PT 7/8 DP 12-935 HDL SPD 1/2DR 19 25-220 WR COMB 12PT LNG 5/8 FP 67-305 PLR CHN NSE 6-1/3 SD CUT 70-950 SCR EXTR 1/8
11-918 HDL FLX 3/8DR 8-1/2 12-945 RAT SPIN 1/2DR 25-222 WR COMB 12PT LNG 11/16 FP W/GRP 70-952 SCR EXTR 3/16
11-922 EXTEN 3/8DR 3 12-947 UNV JNT 1/2DR 25-224 WR COMB 12PT LNG 3/4 FP 67-669 PLR SLP JNT 8 W/GRP 70-954 SCR EXTR 15/64
11-927 EXTEN 3/8DR 12 12-972 RAT 1/2DR 10-1/2 REPL 12-903 25-226 WR COMB 12PT LNG 13/16 FP 67-779 PLR TNG&GRV 10 W/GRP 70-956 SCR EXTR 5/16
11-935 HDL SPD 3/8DR 16-1/2 13-128 SKT 3/4DR 12PT 7/8 25-228 WR COMB 12PT LNG 7/8 FP 67-783 PLR TNG&GRV 16 W/GRP 70-958 SCR EXTR 3/8
11-947 UNV JNT 3/8DR 13-130 SKT 3/4DR 12PT 15/16 25-230 WR COMB 12PT LNG 15/16 FP 67-901 PLR WIRE STRPR CRMP CUT 8-1/4 73-014 WR PIPE 14 HD
11-972 RAT 3/8DR 7-3/8 REPL 11-903 13-132 SKT 3/4DR 12PT 1 25-232 WR COMB 12PT LNG 1 FP 68-065 SET RET RNG PLR LIGHT DUTY 78-404 C-CL THRT DP 4 STD SCREW
12-112 SKT 1/2DR 12PT 3/8 13-134 SKT 3/4DR 12PT 1-1/16 25-234 WR COMB 12PT LNG 1-1/16 FP 68-255 SNIPS AVN 10 STRT BLK (2)
12-114 SKT 1/2DR 12PT 7/16 13-136 SKT 3/4DR 12PT 1-1/8 25-236 WR COMB 12PT LNG 1-1/8 FP 68-310 KNFE UTIL RETRACT 67-407 7" LOCKING PLIERS
12-116 SKT 1/2DR 12PT 1/2 13-140 SKT 3/4DR 12PT 1-1/4 25-240 WR COMB 12PT LNG 1-1/4 FP 68-445 TP MEAS 1X25 LCK AUTO

Set 15-047 417 Pc. Master Mechanics Set - Tools Only

10-006 SKT 1/4DR 6PT 3/16 10-935 HDL SPD 1/4DR 15-3/4 11-708 SKT 3/8DR HEX BIT 1/8 12-125 SKT 1/2DR 12PT 25/32 12-719 SKT 1/2DR HEX BIT 5/8
10-007 SKT 1/4DR 6PT 7/32 10-938 HDL T 1/4DR 4-1/2 11-710 SKT 3/8DR HEX BIT 5/32 12-126 SKT 1/2DR 12PT 13/16 12-892 SKT 1/2DR DRAG LNK 7/64
10-008 SKT 1/4DR 6PT 1/4 10-943 HDL SPIN 1/4DR 6 11-711 SKT 3/8DR HEX BIT 3/16 12-128 SKT 1/2DR 12PT 7/8 12-893 SKT 1/2DR DRAG LNK 3/32
10-009 SKT 1/4DR 6PT 9/32 10-947 UNV JNT 1/4DR 11-712 SKT 3/8DR HEX BIT 7/32 12-130 SKT 1/2DR 12PT 15/16 12-918 HDL FLX 1/2DR 17
10-010 SKT 1/4DR 6PT 5/16 10-972 RAT 1/4DR 5-9/32 REPL 10-903 11-713 SKT 3/8DR HEX BIT 1/4 12-132 SKT 1/2DR 12PT 1 12-921 EXTEN 1/2DR 2-1/2
10-011 SKT 1/4DR 6PT 11/32 67-410 10" LOCKING PLIERS 11-714 SKT 3/8DR HEX BIT 5/16 12-134 SKT 1/2DR 12PT 1-1/16 12-923 EXTEN 1/2DR 5
10-012 SKT 1/4DR 6PT 3/8 11-108 SKT 3/8DR 12PT 1/4 11-715 SKT 3/8DR HEX BIT 3/8 12-136 SKT 1/2DR 12PT 1-1/8 12-924 EXTEN 1/2DR 10
10-014 SKT 1/4DR 6PT 7/16 11-110 SKT 3/8DR 12PT 5/16 11-802 SKT 3/8DR SLT BIT 1/4 12-138 SKT 1/2DR 12PT 1-3/16 12-935 HDL SPD 1/2DR 19
10-016 SKT 1/4DR 6PT 1/2 11-112 SKT 3/8DR 12PT 3/8 11-822 SKT 3/8DR PHLP BIT #2 12-140 SKT 1/2DR 12PT 1-1/4 12-938 HDL T 1/2DR 11
10-018 SKT 1/4DR 6PT 9/16 11-114 SKT 3/8DR 12PT 7/16 11-825 SKT 3/8DR PHLP BIT #3 12-142 SKT 1/2DR 12PT 1-5/16 12-944 ADP RAT 1/2DR
10-206 SKT 1/4DR 6PT 3/16 DP 11-116 SKT 3/8DR 12PT 1/2 11-828 SKT 3/8DR PHLP BIT #4 12-144 SKT 1/2DR 12PT 1-3/8 12-947 UNV JNT 1/2DR
10-207 SKT 1/4DR 6PT 7/32 DP 11-118 SKT 3/8DR 12PT 9/16 11-850 WR 3/8DR CRFT 3/8 12-146 SKT 1/2DR 12PT 1-7/16 12-951 ADP 1/2DR 1/2FX3/8M
10-208 SKT 1/4DR 6PT 1/4 DP 11-120 SKT 3/8DR 12PT 5/8 11-851 WR 3/8DR CRFT 7/16 12-148 SKT 1/2DR 12PT 1-1/2 12-972 RAT 1/2DR 10-1/2 REPL 12-903
10-209 SKT 1/4DR 6PT 9/32 DP 11-122 SKT 3/8DR 12PT 11/16 11-852 WR 3/8DR CRFT 1/2 12-316 SKT 1/2DR 12PT 1/2 DP 12-973 RAT 1/2DR 15 REPL 12-904
10-210 SKT 1/4DR 6PT 5/16 DP 11-124 SKT 3/8DR 12PT 3/4 11-853 WR 3/8DR CRFT 9/16 12-318 SKT 1/2DR 12PT 9/16 DP 12-974 RAT 1/2DR FLX 14-1/4
10-211 SKT 1/4DR 6PT 11/32 DP 11-126 SKT 3/8DR 12PT 13/16 11-854 WR 3/8DR CRFT 5/8 12-320 SKT 1/2DR 12PT 5/8 DP 2425 SCRAPER
10-212 SKT 1/4DR 6PT 3/8 DP 11-128 SKT 3/8DR 12PT 7/8 11-855 WR 3/8DR CRFT 11/16 12-322 SKT 1/2DR 12PT 11/16 DP 25-004 WR COMB 6PT SHT 1/8 FP
10-214 SKT 1/4DR 6PT 7/16 DP 11-130 SKT 3/8DR 12PT 15/16 11-856 WR 3/8DR CRFT 3/4 12-324 SKT 1/2DR 12PT 3/4 DP 25-005 WR COMB 6PT SHT 5/32 FP
10-216 SKT 1/4DR 6PT 1/2 DP 11-132 SKT 3/8DR 12PT 1 11-857 WR 3/8DR CRFT 13/16 12-326 SKT 1/2DR 12PT 13/16 DP 25-006 WR COMB 6PT SHT 3/16 FP
10-218 SKT 1/4DR 6PT 9/16 DP 11-308 SKT 3/8DR 12PT 1/4 DP 11-858 WR 3/8DR CRFT 7/8 12-328 SKT 1/2DR 12PT 7/8 DP 25-008 WR COMB 6PT SHT 1/4 FP
10-408 SKT 1/4DR 4PT 1/4 11-310 SKT 3/8DR 12PT 5/16 DP 11-872 SKT 3/8DR TRX BIT T15 12-330 SKT 1/2DR 12PT 15/16 DP 25-009 WR COMB 6PT SHT 9/32 FP
10-410 SKT 1/4DR 8PT 5/16 11-312 SKT 3/8DR 12PT 3/8 DP 11-874 SKT 3/8DR TRX BIT T20 12-332 SKT 1/2DR 12PT 1 DP 25-010 WR COMB 6PT SHT 5/16 FP
10-412 SKT 1/4DR 8PT 3/8 11-314 SKT 3/8DR 12PT 7/16 DP 11-876 SKT 3/8DR TRX BIT T25 12-334 SKT 1/2DR 12PT 1-1/16 DP 25-011 WR COMB 6PT SHT 11/32 FP
10-704 SKT 1/4 DR HEX BIT 1/16 11-316 SKT 3/8DR 12PT 1/2 DP 11-878 SKT 3/8DR TRX BIT T27 12-336 SKT 1/2DR 12PT 1-1/8 DP 25-012 WR COMB 6PT SHT 3/8 FP
10-705 SKT 1/4 DR HEX BIT 5/64 11-318 SKT 3/8DR 12PT 9/16 DP 11-880 SKT 3/8DR TRX BIT T30 12-340 SKT 1/2DR 12PT 1-1/4 DP 25-210 WR COMB 12PT LNG 5/16 FP
10-706 SKT 1/4 DR HEX BIT 3/32 11-320 SKT 3/8DR 12PT 5/8 DP 11-882 SKT 3/8DR TRX BIT T40 12-412 SKT 1/2DR 8PT 3/8 25-212 WR COMB 12PT LNG 3/8 FP
10-707 SKT 1/4 DR HEX BIT 7/64 11-322 SKT 3/8DR 12PT 11/16 DP 11-918 HDL FLX 3/8DR 8-1/2 12-414 SKT 1/2DR 8PT 7/16 25-214 WR COMB 12PT LNG 7/16 FP
10-708 SKT 1/4 DR HEX BIT 1/8 11-324 SKT 3/8DR 12PT 3/4 DP 11-922 EXTEN 3/8DR 3 12-416 SKT 1/2DR 8PT 1/2 25-216 WR COMB 12PT LNG 1/2 FP
10-709 SKT 1/4 DR HEX BIT 9/64 11-326 SKT 3/8DR 12PT 13/16 DP 11-923 EXTEN 3/8DR 6 12-418 SKT 1/2DR 8PT 9/16 25-218 WR COMB 12PT LNG 9/16 FP
10-710 SKT 1/4 DR HEX BIT 5/32 11-328 SKT 3/8DR 12PT 7/8 DP 11-927 EXTEN 3/8DR 12 12-420 SKT 1/2DR 8PT 5/8 25-220 WR COMB 12PT LNG 5/8 FP
10-711 SKT 1/4 DR HEX BIT 3/16 11-330 SKT 3/8DR 12PT 15/16 DP 11-929 EXTEN FLX 3/8DR 7-1/4 12-422 SKT 1/2DR 8PT 11/16 25-222 WR COMB 12PT LNG 11/16 FP
10-712 SKT 1/4 DR HEX BIT 7/32 11-332 SKT 3/8DR 12PT 1 DP 11-935 HDL SPD 3/8DR 16-1/2 12-424 SKT 1/2DR 8PT 3/4 25-224 WR COMB 12PT LNG 3/4 FP
10-713 SKT 1/4 DR HEX BIT 1/4 11-408 SKT 3/8DR 8PT 1/4 11-938 HDL T 3/8DR 8 12-426 SKT 1/2DR 8PT 13/16 25-226 WR COMB 12PT LNG 13/16 FP
10-714 SKT 1/4 DR HEX BIT 5/16 11-410 SKT 3/8DR 8PT 5/16 11-947 UNV JNT 3/8DR 12-428 SKT 1/2DR 8PT 7/8 25-228 WR COMB 12PT LNG 7/8 FP
10-801 SKT 1/4DR SLT BIT 3/16 11-412 SKT 3/8DR 8PT 3/8 11-972 RAT 3/8DR 7-3/8 REPL 11-903 12-432 SKT 1/2DR 8PT 1 25-230 WR COMB 12PT LNG 15/16 FP
10-802 SKT 1/4DR SLT BIT 1/4 11-414 SKT 3/8DR 8PT 7/16 11-974 RAT 3/8DR FLX 9-1/2 12-516 SKT 1/2DR UNV 12PT 1/2 25-232 WR COMB 12PT LNG 1 FP
10-821 SKT 1/4DR PHLP BIT #1 11-416 SKT 3/8DR 8PT 1/2 12-112 SKT 1/2DR 12PT 3/8 12-518 SKT 1/2DR UNV 12PT 9/16 25-234 WR COMB 12PT LNG 1-1/16 FP
10-822 SKT 1/4DR PHLP BIT #2 11-512 SKT 3/8DR UNV 12PT 3/8 12-114 SKT 1/2DR 12PT 7/16 12-520 SKT 1/2DR UNV 12PT 5/8 25-236 WR COMB 12PT LNG 1-1/8 FP
10-823 SKT 1/4DR PHLP BIT #3 11-514 SKT 3/8DR UNV 12PT 7/16 12-116 SKT 1/2DR 12PT 1/2 12-713 SKT 1/2DR HEX BIT 1/4 25-240 WR COMB 12PT LNG 1-1/4 FP
10-918 HDL FLX 1/4DR 5-3/4 11-516 SKT 3/8DR UNV 12PT 1/2 12-118 SKT 1/2DR 12PT 9/16 12-714 SKT 1/2DR HEX BIT 5/16 25-512 WR COMB FLX HD 12PT 3/8 FP
10-921 EXTEN 1/4DR 2 11-518 SKT 3/8DR UNV 12PT 9/16 12-119 SKT 1/2DR 12PT 19/32 12-715 SKT 1/2DR HEX BIT 3/8 25-514 WR COMB FLX HD 12PT 7/16 FP
10-922 EXTEN 1/4DR 4 11-520 SKT 3/8DR UNV 12PT 5/8 12-120 SKT 1/2DR 12PT 5/8 12-716 SKT 1/2DR HEX BIT 7/16 25-516 WR COMB FLX HD 12PT 1/2 FP
10-923 EXTEN 1/4DR 6 11-522 SKT 3/8DR UNV 12PT 11/16 12-122 SKT 1/2DR 12PT 11/16 12-717 SKT 1/2DR HEX BIT 1/2 25-518 WR COMB FLX HD 12PT 9/16 FP
10-929 EXTEN 1/4DR FLX 6 11-524 SKT 3/8DR UNV 12PT 3/4 12-124 SKT 1/2DR 12PT 3/4 12-718 SKT 1/2DR HEX BIT 9/16 Continued . . .

A-10
 A
Master Set Contents
Set 15-047 417 Pc. Master Mechanics Set Cont.
25-520 WR COMB FLX HD 12PT 5/8 FP 27-914 WR ANG OE 7/16 MDGT 15&75D FP 66-253 SCRDR CAB 1/8X3 68-030 PLR RET RNG CONV .047 90D 70-309 CHSL CLD 1/2 TIP
25-522 WR COMB FLX HD 12PT 11/16 FP 27-916 WR ANG OE 1/2 MDGT 15&75D FP 66-255 SCRDR CAB 1/8X4 68-031 PLR RET RNG CONV .070 0D 70-311 CHSL CLD 5/8 TIP
25-524 WR COMB FLX HD 12PT 3/4 FP 28-212 WR COMB FLR NUT 6PT 3/8 FP 66-259 SCRDR CAB 1/8X8 68-032 PLR RET RNG CONV .070 45D 70-313 CHSL CLD 3/4 TIP
26-022 WR OE 1/4X5/16 FP 28-214 WR COMB FLR NUT 6PT 7/16 FP 66-262 SCRDR CAB 3/16X4 68-033 PLR RET RNG CONV .070 90D 70-315 CHSL CLD 7/8 TIP
26-043 WR OE 3/8X7/16 FP 28-216 WR COMB FLR NUT 6PT 1/2 FP 66-268 SCRDR CAB 3/16X8 68-034 PLR RET RNG CONV .090 0D 70-317 CHSL CLD 1 TIP
26-067 WR OE 1/2X9/16 FP 28-218 WR COMB FLR NUT 6PT 9/16 FP 66-806 NUT DR 3/16 HOLL SHFT 68-035 PLR RET RNG CONV .090 45D 70-319 CHSL CLD 1-1/8 TIP
26-094 WR OE 5/8X11/16 FP 28-220 WR COMB FLR NUT 6PT 5/8 FP 66-807 NUT DR 7/32 HOLL SHFT 68-036 PLR RET RNG CONV .090 90D 70-503 ALIGNING BAR PINCH 5/8X16
26-121 WR OE 3/4X13/16 FP 28-222 WR COMB FLR NUT 6PT 11/16 FP 66-808 NUT DR 1/4 HOLL SHFT 68-241 SNIPS MINI 6-1/2 70-505 ALIGNING BAR PINCH 3/4X24
26-139 WR OE 7/8X15/16 FP 28-224 WR COMB FLR NUT 6PT 3/4 FP 66-809 NUT DR 9/32 HOLL SHFT 68-255 SNIPS AVN 10 STRT 70-519 CHSL BAR ROLL1/2X15
26-163 WR OE 1X1-1/8 FP 28-312 WR RAT FLR NUT 12PT 3/8 66-810 NUT DR 5/16 HOLL SHFT 68-275 SNIPS STRT 12-3/4 70-521 CHSL BAR ROLL 5/8X18
26-169 WR OE 1-1/16X1-1/4 FP 28-314 WR RAT FLR NUT 12PT 7/16 66-811 NUT DR 11/32 HOLL SHFT 68-310 KNFE UTIL RETRACT 70-793 SET FEELER GAUGE 25 BLADE
26-187 WR OE 1-5/16X1-1/2 FP 28-316 WR RAT FLR NUT 12PT 1/2 66-812 NUT DR 3/8 HOLL SHFT 68-445 TP MEAS 1X25 LCK AUTO 70-865 HCKS FLT FRM
26-190 WR OE 1-3/8X1-7/16 FP 28-318 WR RAT FLR NUT 12PT 9/16 66-814 NUT DR 7/16 HOLL SHFT 69-444 HMR BLL PN 8OZ WD HDL 70-929 TELESCP MIRROR 2-1/8 DIA
27-143 WR BX 12PT SHT 3/8X7/16 FP 28-320 WR RAT FLR NUT 12PT 5/8 66-816 NUT DR 1/2 HOLL SHFT 69-448 HMR BLL PN 1LB WD HDL 70-933 RETR TL MAG TELESCP
27-167 WR BX 12PT SHT 1/2X9/16 FP 28-322 WR RAT FLR NUT 12PT 11/16 66-818 NUT DR 9/16 HOLL SHFT 69-452 HMR BLL PN 2LB WD HDL 70-950 SCR EXTR 1/8
27-194 WR BX 12PT SHT 5/8X11/16 FP 28-324 WR RAT FLR NUT 12PT 3/4 66-820 NUT DR 5/8 HOLL SHFT 69-490 RBR MALL 32OZ 16-1/2 70-952 SCR EXTR 3/16
27-206 WR BX 12PT SHT 11/16X3/4 FP 28-406 WR ADJ 6 66-924 SCR START SLT 5 69-532 HMR DEAD BLOW STD 21OZ 70-954 SCR EXTR 15/64
27-343 WR BX 12PT LNG 3/8X7/16 FP 28-408 WR ADJ 8 66-933 SCR START PHLP 5 67-436 6" LOCKING PLIERS 70-956 SCR EXTR 5/16
27-367 WR BX 12PT LNG 1/2X9/16 FP 28-410 WR ADJ 10 67-067 PLR LNMN 8-1/2 W/GRP 70-000 PUNCH & CHISEL HOLDER 70-958 SCR EXTR 3/8
27-394 WR BX 12PT LNG 5/8X11/16 FP 28-412 WR ADJ 12 67-109 PLR DIAG CUT 7 HD W/GRP 70-103 PNCH PIN 3/32 TIP 70-960 SCR EXTR 15/32
27-424 WR BX 12PT LNG 3/4X7/8 FP 3470 HOOK & PIN PULLER 67-161 PLR DIAG CUT 6-3/8 W/GRP 70-105 PNCH PIN 1/8 TIP 70-962 SCR EXTR 9/16
27-451 WR BX 12PT LNG 15/16X1 FP 485 GASKET SCRAPER 67-305 PLR CHN NSE 6-1/3 SD CUT 70-107 PNCH PIN 5/32 TIP 70-964 SCR EXTR 21/32
27-466 WR BX 12PT LNG 1-1/16X1-1/8 FP 56131 6 PC T-HDLE BALL PLUS SET W/GRP 70-109 PNCH PIN 3/16 TIP 70-966 SCR EXTR 13/16
27-510 WR GEARED BOX 12PT 3/8 FP 56193 13 PC BALL PLUS SET 67-357 PLR NDL NSE 5-7/16 W/GRP 70-129 PNCH PIN 7/32 TIP 71-614 PULLER REV CONE 3JAW
27-511 WR GEARED BOX 12PT 7/16 FP 64-085 WR TRQ 1/2DR 10-150 FT/LB 67-401 PLR NDL NSE 5-7/8 CURV 70-131 PNCH PIN 1/4 TIP 73-008 WR PIPE 8 HD
27-512 WR GEARED BOX 12PT 1/2 FP 66-150 SCRDR PHLP #2X1-1/2 W/GRP 70-155 PNCH START 3/32 TIP 73-010 WR PIPE 10 HD
27-513 WR GEARED BOX 12PT 9/16 FP 66-152 SCRDR PHLP #0X2-1/2 67-503 PLR DKBL 8 W/GRP 70-157 PNCH START 1/8 TIP 73-014 WR PIPE 14 HD
27-514 WR GEARED BOX 12PT 5/8 FP 66-153 SCRDR PHLP #1X3 67-535 PLR END CUT 7-3/8 W/GRP 70-161 PNCH START 3/16 TIP 78-404 C-CL THRT DP 4 STD SCREW
27-515 WR GEARED BOX 12PT 11/16 FP 66-155 SCRDR PHLP #1X6 67-667 PLR SLP JNT 6-1/2 W/GRP 70-163 PNCH START 7/32 TIP BLK (2)
27-516 WR GEARED BOX 12PT 3/4 FP 66-156 SCRDR PHLP #2X4 67-669 PLR SLP JNT 8 W/GRP 70-165 PNCH START 1/4 TIP 67-407 7" LOCKING PLIERS
Master Set Contents

27-904 WR ANG OE 15/64 MDGT 66-158 SCRDR PHLP #2X8 67-717 PLR TNG&GRV 5 W/GRP 70-189 PNCH DRFT 1/8 TIP
15&75D FP 66-161 SCRDR PHLP #3X6 67-777 PLR TNG&GRV 6 W/GRP 70-193 PNCH DRFT 3/16 TIP
27-907 WR ANG OE 7/32 MDGT 15&75D FP 66-164 SCRDR PHLP #4X8 67-779 PLR TNG&GRV 10 W/GRP 70-197 PNCH DRFT 1/4 TIP
27-908 WR ANG OE 1/4 MDGT 15&75D FP 66-203 SCRDR SLT 3/16X4 SQ 67-901 PLR WIRE STRPR CRMP CUT 8-1/4 70-235 PNCH CNTR 3/8
27-909 WR ANG OE 9/32 MDGT 15&75D FP 66-208 SCRDR SLT 1/4X4 SQ 68-025 PLR RET RNG CONV .038 0D 70-239 PNCH CNTR 1/2
27-910 WR ANG OE 5/16 MDGT 15&75D FP 66-217 SCRDR SLT 5/16X6 SQ 68-026 PLR RET RNG CONV .038 45D 70-255 PNCH PRCK 3/8
27-911 WR ANG OE 11/32 MDGT 66-220 SCRDR SLT 3/8X8 SQ 68-027 PLR RET RNG CONV .038 90D 70-301 CHSL CLD 1/4 TIP
15&75D FP 66-226 SCRDR SLT 7/16X12 SQ 68-028 PLR RET RNG CONV .047 0D 70-303 CHSL CLD 5/16 TIP
27-912 WR ANG OE 3/8 MDGT 15&75D FP 66-232 SCRDR SLT 1/4X1-1/2 SQ 68-029 PLR RET RNG CONV .047 45D 70-305 CHSL CLD 3/8 TIP

Set 15-052 227 Pc. Intermediate Set - Tools Only

10-006 SKT 1/4DR 6PT 3/16 11-328 SKT 3/8DR 12PT 7/8 DP 12-330 SKT 1/2DR 12PT 15/16 DP 27-510 WR GEARED BOX 12PT 3/8 FP 67-401 PLR NDL NSE 5-7/8 CURV
10-007 SKT 1/4DR 6PT 7/32 11-408 SKT 3/8DR 8PT 1/4 12-332 SKT 1/2DR 12PT 1 DP 27-511 WR GEARED BOX 12PT 7/16 FP W/GRP
10-008 SKT 1/4DR 6PT 1/4 11-410 SKT 3/8DR 8PT 5/16 12-334 SKT 1/2DR 12PT 1-1/16 DP 27-512 WR GEARED BOX 12PT 1/2 FP 67-503 PLR DKBL 8 W/GRP
10-009 SKT 1/4DR 6PT 9/32 11-412 SKT 3/8DR 8PT 3/8 12-336 SKT 1/2DR 12PT 1-1/8 DP 27-513 WR GEARED BOX 12PT 9/16 FP 67-535 PLR END CUT 7-3/8 W/GRP
10-010 SKT 1/4DR 6PT 5/16 11-514 SKT 3/8DR UNV 12PT 7/16 12-340 SKT 1/2DR 12PT 1-1/4 DP 27-514 WR GEARED BOX 12PT 5/8 FP 67-669 PLR SLP JNT 8 W/GRP
10-011 SKT 1/4DR 6PT 11/32 11-516 SKT 3/8DR UNV 12PT 1/2 12-717 SKT 1/2DR HEX BIT 1/2 27-515 WR GEARED BOX 12PT 11/16 FP 67-779 PLR TNG&GRV 10 W/GRP
10-012 SKT 1/4DR 6PT 3/8 11-518 SKT 3/8DR UNV 12PT 9/16 12-718 SKT 1/2DR HEX BIT 9/16 27-516 WR GEARED BOX 12PT 3/4 FP 67-901 PLR WIRE STRPR CRMP CUT 8-1/4
10-014 SKT 1/4DR 6PT 7/16 11-520 SKT 3/8DR UNV 12PT 5/8 12-719 SKT 1/2DR HEX BIT 5/8 28-212 WR COMB FLR NUT 6PT 3/8 FP 68-065 SET RET RNG PLR LIGHT DUTY
10-016 SKT 1/4DR 6PT 1/2 11-524 SKT 3/8DR UNV 12PT 3/4 12-918 HDL FLX 1/2DR 17 28-214 WR COMB FLR NUT 6PT 7/16 FP 68-241 SNIPS MINI 6-1/2
10-018 SKT 1/4DR 6PT 9/16 11-708 SKT 3/8DR HEX BIT 1/8 12-921 EXTEN 1/2DR 2-1/2 28-216 WR COMB FLR NUT 6PT 1/2 FP 68-255 SNIPS AVN 10 STRT
10-206 SKT 1/4DR 6PT 3/16 DP 11-710 SKT 3/8DR HEX BIT 5/32 12-923 EXTEN 1/2DR 5 28-218 WR COMB FLR NUT 6PT 9/16 FP 68-310 KNFE UTIL RETRACT
10-207 SKT 1/4DR 6PT 7/32 DP 11-711 SKT 3/8DR HEX BIT 3/16 12-924 EXTEN 1/2DR 10 28-220 WR COMB FLR NUT 6PT 5/8 FP 68-445 TP MEAS 1X25 LCK AUTO
10-208 SKT 1/4DR 6PT 1/4 DP 11-712 SKT 3/8DR HEX BIT 7/32 12-935 HDL SPD 1/2DR 19 28-222 WR COMB FLR NUT 6PT 11/16 FP 69-448 HMR BLL PN 1LB WD HDL
10-209 SKT 1/4DR 6PT 9/32 DP 11-713 SKT 3/8DR HEX BIT 1/4 12-947 UNV JNT 1/2DR 28-224 WR COMB FLR NUT 6PT 3/4 FP 69-452 HMR BLL PN 2LB WD HDL
10-210 SKT 1/4DR 6PT 5/16 DP 11-714 SKT 3/8DR HEX BIT 5/16 12-972 RAT 1/2DR 10-1/2 REPL 12-903 28-406 WR ADJ 6 69-532 HMR DEAD BLOW STD 21OZ
10-211 SKT 1/4DR 6PT 11/32 DP 11-715 SKT 3/8DR HEX BIT 3/8 25-210 WR COMB 12PT LNG 5/16 FP 28-408 WR ADJ 8 70-000 PUNCH & CHISEL HOLDER
10-212 SKT 1/4DR 6PT 3/8 DP 11-918 HDL FLX 3/8DR 8-1/2 25-212 WR COMB 12PT LNG 3/8 FP 28-410 WR ADJ 10 70-103 PNCH PIN 3/32 TIP
10-214 SKT 1/4DR 6PT 7/16 DP 11-922 EXTEN 3/8DR 3 25-214 WR COMB 12PT LNG 7/16 FP 3470 HOOK & PIN PULLER 70-105 PNCH PIN 1/8 TIP
10-216 SKT 1/4DR 6PT 1/2 DP 11-923 EXTEN 3/8DR 6 25-216 WR COMB 12PT LNG 1/2 FP 485 GASKET SCRAPER 70-109 PNCH PIN 3/16 TIP
10-218 SKT 1/4DR 6PT 9/16 DP 11-927 EXTEN 3/8DR 12 25-218 WR COMB 12PT LNG 9/16 FP 56193 13 PC BALL PLUS SET 70-153 PNCH START 1/16 TIP
10-918 HDL FLX 1/4DR 5-3/4 11-935 HDL SPD 3/8DR 16-1/2 25-220 WR COMB 12PT LNG 5/8 FP 66-150 SCRDR PHLP #2X1-1/2 70-157 PNCH START 1/8 TIP
10-921 EXTEN 1/4DR 2 11-947 UNV JNT 3/8DR 25-222 WR COMB 12PT LNG 11/16 FP 66-152 SCRDR PHLP #0X2-1/2 70-161 PNCH START 3/16 TIP
10-923 EXTEN 1/4DR 6 11-972 RAT 3/8DR 7-3/8 REPL 11-903 25-224 WR COMB 12PT LNG 3/4 FP 66-153 SCRDR PHLP #1X3 70-235 PNCH CNTR 3/8
10-943 HDL SPIN 1/4DR 6 12-112 SKT 1/2DR 12PT 3/8 25-226 WR COMB 12PT LNG 13/16 FP 66-156 SCRDR PHLP #2X4 70-303 CHSL CLD 5/16 TIP
10-947 UNV JNT 1/4DR 12-114 SKT 1/2DR 12PT 7/16 25-228 WR COMB 12PT LNG 7/8 FP 66-161 SCRDR PHLP #3X6 70-307 CHSL CLD 7/16 TIP
10-972 RAT 1/4DR 5-9/32 REPL 10-903 12-116 SKT 1/2DR 12PT 1/2 25-230 WR COMB 12PT LNG 15/16 FP 66-164 SCRDR PHLP #4X8 70-309 CHSL CLD 1/2 TIP
67-410 10" LOCKING PLIERS 12-118 SKT 1/2DR 12PT 9/16 25-232 WR COMB 12PT LNG 1 FP 66-203 SCRDR SLT 3/16X4 SQ 70-393 CHSL CAPE 7/32 TIP
11-112 SKT 3/8DR 12PT 3/8 12-120 SKT 1/2DR 12PT 5/8 25-234 WR COMB 12PT LNG 1-1/16 FP 66-208 SCRDR SLT 1/4X4 SQ 70-421 CHSL DIA PT 3/16 TIP
11-114 SKT 3/8DR 12PT 7/16 12-122 SKT 1/2DR 12PT 11/16 25-236 WR COMB 12PT LNG 1-1/8 FP 66-217 SCRDR SLT 5/16X6 SQ 70-503 ALIGNING BAR PINCH 5/8X16
11-116 SKT 3/8DR 12PT 1/2 12-124 SKT 1/2DR 12PT 3/4 25-240 WR COMB 12PT LNG 1-1/4 FP 66-220 SCRDR SLT 3/8X8 SQ 70-519 CHSL BAR ROLL1/2X15
11-118 SKT 3/8DR 12PT 9/16 12-126 SKT 1/2DR 12PT 13/16 26-022 WR OE 1/4X5/16 FP 66-226 SCRDR SLT 7/16X12 SQ 70-793 SET FEELER GAUGE 25 BLADE
11-120 SKT 3/8DR 12PT 5/8 12-128 SKT 1/2DR 12PT 7/8 26-034 WR OE 5/16X3/8 FP 66-232 SCRDR SLT 1/4X1-1/2 SQ 70-865 HCKS FLT FRM
11-122 SKT 3/8DR 12PT 11/16 12-130 SKT 1/2DR 12PT 15/16 26-058 WR OE 7/16X1/2 FP 66-808 NUT DR 1/4 HOLL SHFT 70-950 SCR EXTR 1/8
11-124 SKT 3/8DR 12PT 3/4 12-132 SKT 1/2DR 12PT 1 26-067 WR OE 1/2X9/16 FP 66-809 NUT DR 9/32 HOLL SHFT 70-952 SCR EXTR 3/16
11-126 SKT 3/8DR 12PT 13/16 12-134 SKT 1/2DR 12PT 1-1/16 26-079 WR OE 9/16X5/8 FP 66-810 NUT DR 5/16 HOLL SHFT 70-954 SCR EXTR 15/64
11-128 SKT 3/8DR 12PT 7/8 12-136 SKT 1/2DR 12PT 1-1/8 26-097 WR OE 5/8X3/4 FP 66-811 NUT DR 11/32 HOLL SHFT 70-956 SCR EXTR 5/16
11-312 SKT 3/8DR 12PT 3/8 DP 12-140 SKT 1/2DR 12PT 1-1/4 26-106 WR OE 11/16X3/4 FP 66-812 NUT DR 3/8 HOLL SHFT 70-958 SCR EXTR 3/8
11-314 SKT 3/8DR 12PT 7/16 DP 12-316 SKT 1/2DR 12PT 1/2 DP 26-133 WR OE 13/16X7/8 FP 66-814 NUT DR 7/16 HOLL SHFT 73-010 WR PIPE 10 HD
11-316 SKT 3/8DR 12PT 1/2 DP 12-318 SKT 1/2DR 12PT 9/16 DP 26-151 WR OE 15/16X1 FP 66-816 NUT DR 1/2 HOLL SHFT 78-404 C-CL THRT DP 4 STD BLK (2)
11-318 SKT 3/8DR 12PT 9/16 DP 12-320 SKT 1/2DR 12PT 5/8 DP 26-166 WR OE 1-1/16X1-1/8 FP 67-067 PLR LNMN 8-1/2 W/GRP 67-407 7" LOCKING PLIERS
11-320 SKT 3/8DR 12PT 5/8 DP 12-322 SKT 1/2DR 12PT 11/16 DP 27-143 WR BX 12PT SHT 3/8X7/16 FP 67-109 PLR DIAG CUT 7 HD W/GRP
11-322 SKT 3/8DR 12PT 11/16 DP 12-324 SKT 1/2DR 12PT 3/4 DP 27-167 WR BX 12PT SHT 1/2X9/16 FP 67-305 PLR CHN NSE 6-1/3 SD CUT
11-324 SKT 3/8DR 12PT 3/4 DP 12-326 SKT 1/2DR 12PT 13/16 DP 27-194 WR BX 12PT SHT 5/8X11/16 FP W/GRP
11-326 SKT 3/8DR 12PT 13/16 DP 12-328 SKT 1/2DR 12PT 7/8 DP 27-206 WR BX 12PT SHT 11/16X3/4 FP 67-357 PLR NDL NSE 5-7/16 W/GRP

A-11
 A
Master Set Contents
Set 15-057 131 Pc. Basic Set - Tools Only
10-006 SKT 1/4DR 6PT 3/16 11-312 SKT 3/8DR 12PT 3/8 DP 12-126 SKT 1/2DR 12PT 13/16 25-230 WR COMB 12PT LNG 15/16 FP 68-255 SNIPS AVN 10 STRT
10-007 SKT 1/4DR 6PT 7/32 11-314 SKT 3/8DR 12PT 7/16 DP 12-128 SKT 1/2DR 12PT 7/8 25-232 WR COMB 12PT LNG 1 FP 68-310 KNFE UTIL RETRACT
10-008 SKT 1/4DR 6PT 1/4 11-316 SKT 3/8DR 12PT 1/2 DP 12-130 SKT 1/2DR 12PT 15/16 25-234 WR COMB 12PT LNG 1-1/16 FP 69-448 HMR BLL PN 1LB WD HDL
10-009 SKT 1/4DR 6PT 9/32 11-318 SKT 3/8DR 12PT 9/16 DP 12-132 SKT 1/2DR 12PT 1 25-236 WR COMB 12PT LNG 1-1/8 FP 69-532 HMR DEAD BLOW STD 21OZ
10-010 SKT 1/4DR 6PT 5/16 11-320 SKT 3/8DR 12PT 5/8 DP 12-134 SKT 1/2DR 12PT 1-1/16 25-240 WR COMB 12PT LNG 1-1/4 FP 70-000 PUNCH & CHISEL HOLDER
10-011 SKT 1/4DR 6PT 11/32 11-322 SKT 3/8DR 12PT 11/16 DP 12-136 SKT 1/2DR 12PT 1-1/8 28-406 WR ADJ 6 70-103 PNCH PIN 3/32 TIP
10-012 SKT 1/4DR 6PT 3/8 11-324 SKT 3/8DR 12PT 3/4 DP 12-138 SKT 1/2DR 12PT 1-3/16 28-410 WR ADJ 10 70-105 PNCH PIN 1/8 TIP
10-014 SKT 1/4DR 6PT 7/16 11-326 SKT 3/8DR 12PT 13/16 DP 12-140 SKT 1/2DR 12PT 1-1/4 3470 HOOK & PIN PULLER 70-109 PNCH PIN 3/16 TIP
10-016 SKT 1/4DR 6PT 1/2 11-328 SKT 3/8DR 12PT 7/8 DP 12-918 HDL FLX 1/2DR 17 485 GASKET SCRAPER 70-153 PNCH START 1/16 TIP
10-018 SKT 1/4DR 6PT 9/16 11-918 HDL FLX 3/8DR 8-1/2 12-921 EXTEN 1/2DR 2-1/2 56198 7PC BALL PLUS SET 70-157 PNCH START 1/8 TIP
10-921 EXTEN 1/4DR 2 11-922 EXTEN 3/8DR 3 12-923 EXTEN 1/2DR 5 66-102 SCRDR SLT 1/4X4 70-161 PNCH START 3/16 TIP
10-923 EXTEN 1/4DR 6 11-927 EXTEN 3/8DR 12 12-924 EXTEN 1/2DR 10 66-103 SCRDR SLT 5/16X6 70-235 PNCH CNTR 3/8
10-943 HDL SPIN 1/4DR 6 11-935 HDL SPD 3/8DR 16-1/2 12-935 HDL SPD 1/2DR 19 66-153 SCRDR PHLP #1X3 70-303 CHSL CLD 5/16 TIP
10-947 UNV JNT 1/4DR 11-947 UNV JNT 3/8DR 12-947 UNV JNT 1/2DR 66-156 SCRDR PHLP #2X4 70-307 CHSL CLD 7/16 TIP
10-972 RAT 1/4DR 5-9/32 REPL 10-903 11-972 RAT 3/8DR 7-3/8 REPL 11-903 12-972 RAT 1/2DR 10-1/2 REPL 12-903 66-161 SCRDR PHLP #3X6 70-309 CHSL CLD 1/2 TIP
11-112 SKT 3/8DR 12PT 3/8 12-112 SKT 1/2DR 12PT 3/8 25-210 WR COMB 12PT LNG 5/16 FP 66-261 SCRDR CAB 3/16X3 70-393 CHSL CAPE 7/32 TIP
11-114 SKT 3/8DR 12PT 7/16 12-114 SKT 1/2DR 12PT 7/16 25-212 WR COMB 12PT LNG 3/8 FP 66-262 SCRDR CAB 3/16X4 70-421 CHSL DIA PT 3/16 TIP
11-116 SKT 3/8DR 12PT 1/2 12-116 SKT 1/2DR 12PT 1/2 25-214 WR COMB 12PT LNG 7/16 FP 66-265 SCRDR CAB 3/16X5 70-793 SET FEELER GAUGE 25 BLADE
11-118 SKT 3/8DR 12PT 9/16 12-118 SKT 1/2DR 12PT 9/16 25-216 WR COMB 12PT LNG 1/2 FP 67-067 PLR LNMN 8-1/2 W/GRP 70-865 HCKS FLT FRM
11-120 SKT 3/8DR 12PT 5/8 12-119 SKT 1/2DR 12PT 19/32 25-218 WR COMB 12PT LNG 9/16 FP 67-109 PLR DIAG CUT 7 HD W/GRP 70-950 SCR EXTR 1/8
11-122 SKT 3/8DR 12PT 11/16 12-120 SKT 1/2DR 12PT 5/8 25-220 WR COMB 12PT LNG 5/8 FP 67-305 PLR CHN NSE 6-1/3 SD CUT W/GRP 70-952 SCR EXTR 3/16
11-124 SKT 3/8DR 12PT 3/4 12-121 SKT 1/2DR 12PT 21/32 25-222 WR COMB 12PT LNG 11/16 FP 67-669 PLR SLP JNT 8 W/GRP 70-954 SCR EXTR 15/64
11-126 SKT 3/8DR 12PT 13/16 12-122 SKT 1/2DR 12PT 11/16 25-224 WR COMB 12PT LNG 3/4 FP 67-779 PLR TNG&GRV 10 W/GRP 70-956 SCR EXTR 5/16
11-128 SKT 3/8DR 12PT 7/8 12-124 SKT 1/2DR 12PT 3/4 25-226 WR COMB 12PT LNG 13/16 FP 67-901 PLR WIRE STRPR CRMP CUT 8-1/4 70-958 SCR EXTR 3/8
11-310 SKT 3/8DR 12PT 5/16 DP 12-125 SKT 1/2DR 12PT 25/32 25-228 WR COMB 12PT LNG 7/8 FP 68-065 SET RET RNG PLR LIGHT DUTY 67-407 7" LOCKING PLIERS

Set 15-062 163 Pc. Intermediate Set - Tools Only

Master Set Contents

67-410 10" LOCKING PLIERS 11-713 SKT 3/8DR HEX BIT 1/4 12-330 SKT 1/2DR 12PT 15/16 DP 26-067 WR OE 1/2X9/16 FP 67-779 PLR TNG&GRV 10 W/GRP
11-112 SKT 3/8DR 12PT 3/8 11-714 SKT 3/8DR HEX BIT 5/16 12-332 SKT 1/2DR 12PT 1 DP 26-079 WR OE 9/16X5/8 FP 67-901 PLR WIRE STRPR CRMP CUT 8-1/4
11-114 SKT 3/8DR 12PT 7/16 11-715 SKT 3/8DR HEX BIT 3/8 12-334 SKT 1/2DR 12PT 1-1/16 DP 26-106 WR OE 11/16X3/4 FP 68-065 SET RET RNG PLR LIGHT DUTY
11-116 SKT 3/8DR 12PT 1/2 11-918 HDL FLX 3/8DR 8-1/2 12-336 SKT 1/2DR 12PT 1-1/8 DP 26-133 WR OE 13/16X7/8 FP 68-255 SNIPS AVN 10 STRT
11-118 SKT 3/8DR 12PT 9/16 11-922 EXTEN 3/8DR 3 12-340 SKT 1/2DR 12PT 1-1/4 DP 27-143 WR BX 12PT SHT 3/8X7/16 FP 69-448 HMR BLL PN 1LB WD HDL
11-120 SKT 3/8DR 12PT 5/8 11-923 EXTEN 3/8DR 6 12-717 SKT 1/2DR HEX BIT 1/2 27-167 WR BX 12PT SHT 1/2X9/16 FP 69-532 HMR DEAD BLOW STD 21OZ
11-122 SKT 3/8DR 12PT 11/16 11-927 EXTEN 3/8DR 12 12-718 SKT 1/2DR HEX BIT 9/16 27-194 WR BX 12PT SHT 5/8X11/16 FP 70-000 PUNCH & CHISEL HOLDER
11-124 SKT 3/8DR 12PT 3/4 11-935 HDL SPD 3/8DR 16-1/2 12-719 SKT 1/2DR HEX BIT 5/8 27-206 WR BX 12PT SHT 11/16X3/4 FP 70-103 PNCH PIN 3/32 TIP
11-126 SKT 3/8DR 12PT 13/16 11-947 UNV JNT 3/8DR 12-918 HDL FLX 1/2DR 17 28-406 WR ADJ 6 70-105 PNCH PIN 1/8 TIP
11-128 SKT 3/8DR 12PT 7/8 11-972 RAT 3/8DR 7-3/8 REPL 11-903 12-921 EXTEN 1/2DR 2-1/2 28-410 WR ADJ 10 70-109 PNCH PIN 3/16 TIP
11-312 SKT 3/8DR 12PT 3/8 DP 12-112 SKT 1/2DR 12PT 3/8 12-923 EXTEN 1/2DR 5 28-412 WR ADJ 12 70-153 PNCH START 1/16 TIP
11-314 SKT 3/8DR 12PT 7/16 DP 12-114 SKT 1/2DR 12PT 7/16 12-924 EXTEN 1/2DR 10 485 GASKET SCRAPER 70-157 PNCH START 1/8 TIP
11-316 SKT 3/8DR 12PT 1/2 DP 12-116 SKT 1/2DR 12PT 1/2 12-935 HDL SPD 1/2DR 19 56196 12 PC BALL PLUS SET 70-161 PNCH START 3/16 TIP
11-318 SKT 3/8DR 12PT 9/16 DP 12-118 SKT 1/2DR 12PT 9/16 12-947 UNV JNT 1/2DR 66-150 SCRDR PHLP #2X1-1/2 70-235 PNCH CNTR 3/8
11-320 SKT 3/8DR 12PT 5/8 DP 12-120 SKT 1/2DR 12PT 5/8 12-972 RAT 1/2DR 10-1/2 REPL 12-903 66-152 SCRDR PHLP #0X2-1/2 70-303 CHSL CLD 5/16 TIP
11-322 SKT 3/8DR 12PT 11/16 DP 12-122 SKT 1/2DR 12PT 11/16 25-210 WR COMB 12PT LNG 5/16 FP 66-153 SCRDR PHLP #1X3 70-307 CHSL CLD 7/16 TIP
11-324 SKT 3/8DR 12PT 3/4 DP 12-124 SKT 1/2DR 12PT 3/4 25-212 WR COMB 12PT LNG 3/8 FP 66-156 SCRDR PHLP #2X4 70-309 CHSL CLD 1/2 TIP
11-326 SKT 3/8DR 12PT 13/16 DP 12-126 SKT 1/2DR 12PT 13/16 25-214 WR COMB 12PT LNG 7/16 FP 66-161 SCRDR PHLP #3X6 70-393 CHSL CAPE 7/32 TIP
11-328 SKT 3/8DR 12PT 7/8 DP 12-128 SKT 1/2DR 12PT 7/8 25-216 WR COMB 12PT LNG 1/2 FP 66-164 SCRDR PHLP #4X8 70-421 CHSL DIA PT 3/16 TIP
11-408 SKT 3/8DR 8PT 1/4 12-130 SKT 1/2DR 12PT 15/16 25-218 WR COMB 12PT LNG 9/16 FP 66-203 SCRDR SLT 3/16X4 SQ 70-503 ALIGNING BAR PINCH 5/8X16
11-410 SKT 3/8DR 8PT 5/16 12-132 SKT 1/2DR 12PT 1 25-220 WR COMB 12PT LNG 5/8 FP 66-208 SCRDR SLT 1/4X4 SQ 70-519 CHSL BAR ROLL1/2X15
11-412 SKT 3/8DR 8PT 3/8 12-134 SKT 1/2DR 12PT 1-1/16 25-222 WR COMB 12PT LNG 11/16 FP 66-217 SCRDR SLT 5/16X6 SQ 70-865 HCKS FLT FRM
11-514 SKT 3/8DR UNV 12PT 7/16 12-136 SKT 1/2DR 12PT 1-1/8 25-224 WR COMB 12PT LNG 3/4 FP 66-220 SCRDR SLT 3/8X8 SQ 70-950 SCR EXTR 1/8
11-516 SKT 3/8DR UNV 12PT 1/2 12-140 SKT 1/2DR 12PT 1-1/4 25-226 WR COMB 12PT LNG 13/16 FP 66-226 SCRDR SLT 7/16X12 SQ 70-952 SCR EXTR 3/16
11-518 SKT 3/8DR UNV 12PT 9/16 12-316 SKT 1/2DR 12PT 1/2 DP 25-228 WR COMB 12PT LNG 7/8 FP 66-232 SCRDR SLT 1/4X1-1/2 SQ 70-954 SCR EXTR 15/64
11-520 SKT 3/8DR UNV 12PT 5/8 12-318 SKT 1/2DR 12PT 9/16 DP 25-230 WR COMB 12PT LNG 15/16 FP 67-067 PLR LNMN 8-1/2 W/GRP 70-956 SCR EXTR 5/16
11-524 SKT 3/8DR UNV 12PT 3/4 12-320 SKT 1/2DR 12PT 5/8 DP 25-232 WR COMB 12PT LNG 1 FP 67-109 PLR DIAG CUT 7 HD W/GRP 70-958 SCR EXTR 3/8
11-708 SKT 3/8DR HEX BIT 1/8 12-322 SKT 1/2DR 12PT 11/16 DP 25-234 WR COMB 12PT LNG 1-1/16 FP 67-161 PLR DIAG CUT 6-3/8 W/GRP 67-407 7" LOCKING PLIERS
11-710 SKT 3/8DR HEX BIT 5/32 12-324 SKT 1/2DR 12PT 3/4 DP 25-236 WR COMB 12PT LNG 1-1/8 FP 67-305 PLR CHN NSE 6-1/3 SD CUT W/GRP
11-711 SKT 3/8DR HEX BIT 3/16 12-326 SKT 1/2DR 12PT 13/16 DP 25-240 WR COMB 12PT LNG 1-1/4 FP 67-535 PLR END CUT 7-3/8 W/GRP
11-712 SKT 3/8DR HEX BIT 7/32 12-328 SKT 1/2DR 12PT 7/8 DP 26-043 WR OE 3/8X7/16 FP 67-669 PLR SLP JNT 8 W/GRP

Set 15-066 96 Pc. Basic Set - Tools Only

11-112 SKT 3/8DR 12PT 3/8 12-118 SKT 1/2DR 12PT 9/16 12-924 EXTEN 1/2DR 10 25-236 WR COMB 12PT LNG 1-1/8 FP 68-255 SNIPS AVN 10 STRT
11-114 SKT 3/8DR 12PT 7/16 12-119 SKT 1/2DR 12PT 19/32 12-935 HDL SPD 1/2DR 19 25-240 WR COMB 12PT LNG 1-1/4 FP 69-448 HMR BLL PN 1LB WD HDL
11-116 SKT 3/8DR 12PT 1/2 12-120 SKT 1/2DR 12PT 5/8 12-945 RAT SPIN 1/2DR 28-406 WR ADJ 6 69-532 HMR DEAD BLOW STD 21OZ
11-118 SKT 3/8DR 12PT 9/16 12-121 SKT 1/2DR 12PT 21/32 12-947 UNV JNT 1/2DR 28-410 WR ADJ 10 70-000 PUNCH & CHISEL HOLDER
11-120 SKT 3/8DR 12PT 5/8 12-122 SKT 1/2DR 12PT 11/16 12-972 RAT 1/2DR 10-1/2 REPL 12-903 485 GASKET SCRAPER 70-103 PNCH PIN 3/32 TIP
11-122 SKT 3/8DR 12PT 11/16 12-124 SKT 1/2DR 12PT 3/4 25-210 WR COMB 12PT LNG 5/16 FP 56198 7PC BALL PLUS SET 70-105 PNCH PIN 1/8 TIP
11-124 SKT 3/8DR 12PT 3/4 12-125 SKT 1/2DR 12PT 25/32 25-212 WR COMB 12PT LNG 3/8 FP 66-102 SCRDR SLT 1/4X4 70-109 PNCH PIN 3/16 TIP
11-126 SKT 3/8DR 12PT 13/16 12-126 SKT 1/2DR 12PT 13/16 25-214 WR COMB 12PT LNG 7/16 FP 66-103 SCRDR SLT 5/16X6 70-153 PNCH START 1/16 TIP
11-128 SKT 3/8DR 12PT 7/8 12-128 SKT 1/2DR 12PT 7/8 25-216 WR COMB 12PT LNG 1/2 FP 66-153 SCRDR PHLP #1X3 70-157 PNCH START 1/8 TIP
11-918 HDL FLX 3/8DR 8-1/2 12-130 SKT 1/2DR 12PT 15/16 25-218 WR COMB 12PT LNG 9/16 FP 66-156 SCRDR PHLP #2X4 70-161 PNCH START 3/16 TIP
11-922 EXTEN 3/8DR 3 12-132 SKT 1/2DR 12PT 1 25-220 WR COMB 12PT LNG 5/8 FP 66-161 SCRDR PHLP #3X6 70-235 PNCH CNTR 3/8
11-927 EXTEN 3/8DR 12 12-134 SKT 1/2DR 12PT 1-1/16 25-222 WR COMB 12PT LNG 11/16 FP 66-261 SCRDR CAB 3/16X3 70-303 CHSL CLD 5/16 TIP
11-935 HDL SPD 3/8DR 16-1/2 12-136 SKT 1/2DR 12PT 1-1/8 25-224 WR COMB 12PT LNG 3/4 FP 66-262 SCRDR CAB 3/16X4 70-307 CHSL CLD 7/16 TIP
11-947 UNV JNT 3/8DR 12-138 SKT 1/2DR 12PT 1-3/16 25-226 WR COMB 12PT LNG 13/16 FP 66-265 SCRDR CAB 3/16X5 70-309 CHSL CLD 1/2 TIP
11-972 RAT 3/8DR 7-3/8 REPL 11-903 12-140 SKT 1/2DR 12PT 1-1/4 25-228 WR COMB 12PT LNG 7/8 FP 67-109 PLR DIAG CUT 7 HD W/GRP 70-393 CHSL CAPE 7/32 TIP
12-112 SKT 1/2DR 12PT 3/8 12-918 HDL FLX 1/2DR 17 25-230 WR COMB 12PT LNG 15/16 FP 67-305 PLR CHN NSE 6-1/3 SD CUT W/GRP 70-421 CHSL DIA PT 3/16 TIP
12-114 SKT 1/2DR 12PT 7/16 12-921 EXTEN 1/2DR 2-1/2 25-232 WR COMB 12PT LNG 1 FP 67-669 PLR SLP JNT 8 W/GRP 70-865 HCKS FLT FRM
12-116 SKT 1/2DR 12PT 1/2 12-923 EXTEN 1/2DR 5 25-234 WR COMB 12PT LNG 1-1/16 FP 67-779 PLR TNG&GRV 10 W/GRP 67-407 7" LOCKING PLIERS

A-12
 A
Master Set Contents
Set 15-071 78 Pc. Basic Set - Tools Only
12-112 SKT 1/2DR 12PT 3/8 12-316 SKT 1/2DR 12PT 1/2 DP 12-924 EXTEN 1/2DR 10 25-234 WR COMB 12PT LNG 1-1/16 FP 67-109 PLR DIAG CUT 7 HD W/GRP
12-114 SKT 1/2DR 12PT 7/16 12-318 SKT 1/2DR 12PT 9/16 DP 12-972 RAT 1/2DR 10-1/2 REPL 12-903 25-236 WR COMB 12PT LNG 1-1/8 FP 67-323 PLR CHN NSE 8 W/GRP
12-116 SKT 1/2DR 12PT 1/2 12-320 SKT 1/2DR 12PT 5/8 DP 25-210 WR COMB 12PT LNG 5/16 FP 25-240 WR COMB 12PT LNG 1-1/4 FP 67-669 PLR SLP JNT 8 W/GRP
12-118 SKT 1/2DR 12PT 9/16 12-322 SKT 1/2DR 12PT 11/16 DP 25-212 WR COMB 12PT LNG 3/8 FP 28-408 WR ADJ 8 67-779 PLR TNG&GRV 10 W/GRP
12-120 SKT 1/2DR 12PT 5/8 12-324 SKT 1/2DR 12PT 3/4 DP 25-214 WR COMB 12PT LNG 7/16 FP 28-412 WR ADJ 12 69-448 HMR BLL PN 1LB WD HDL
12-122 SKT 1/2DR 12PT 11/16 12-326 SKT 1/2DR 12PT 13/16 DP 25-216 WR COMB 12PT LNG 1/2 FP 56066 9 PC FOLD-UP 69-532 HMR DEAD BLOW STD 21OZ
12-124 SKT 1/2DR 12PT 3/4 12-328 SKT 1/2DR 12PT 7/8 DP 25-218 WR COMB 12PT LNG 9/16 FP 66-102 SCRDR SLT 1/4X4 70-109 PNCH PIN 3/16 TIP
12-126 SKT 1/2DR 12PT 13/16 12-330 SKT 1/2DR 12PT 15/16 DP 25-220 WR COMB 12PT LNG 5/8 FP 66-103 SCRDR SLT 5/16X6 70-197 PNCH DRFT 1/4 TIP
12-128 SKT 1/2DR 12PT 7/8 12-332 SKT 1/2DR 12PT 1 DP 25-222 WR COMB 12PT LNG 11/16 FP 66-153 SCRDR PHLP #1X3 70-235 PNCH CNTR 3/8
12-130 SKT 1/2DR 12PT 15/16 12-334 SKT 1/2DR 12PT 1-1/16 DP 25-224 WR COMB 12PT LNG 3/4 FP 66-156 SCRDR PHLP #2X4 70-239 PNCH CNTR 1/2
12-132 SKT 1/2DR 12PT 1 12-336 SKT 1/2DR 12PT 1-1/8 DP 25-226 WR COMB 12PT LNG 13/16 FP 66-161 SCRDR PHLP #3X6 70-305 CHSL CLD 3/8 TIP
12-134 SKT 1/2DR 12PT 1-1/16 12-340 SKT 1/2DR 12PT 1-1/4 DP 25-228 WR COMB 12PT LNG 7/8 FP 66-261 SCRDR CAB 3/16X3 70-309 CHSL CLD 1/2 TIP
12-136 SKT 1/2DR 12PT 1-1/8 12-918 HDL FLX 1/2DR 17 25-230 WR COMB 12PT LNG 15/16 FP 66-262 SCRDR CAB 3/16X4 70-313 CHSL CLD 3/4 TIP
12-140 SKT 1/2DR 12PT 1-1/4 12-923 EXTEN 1/2DR 5 25-232 WR COMB 12PT LNG 1 FP 66-265 SCRDR CAB 3/16X5 67-407 7" LOCKING PLIERS

Set 15-076 62 Pc. Basic Set - Tools Only

11-012 SKT 3/8DR 6PT 3/8 11-216 SKT 3/8DR 6PT 1/2 DP 25-212 WR COMB 12PT LNG 3/8 FP 56066 9 PC FOLD-UP 69-530 HMR DEAD BLOW STD 10OZ
11-014 SKT 3/8DR 6PT 7/16 11-218 SKT 3/8DR 6PT 9/16 DP 25-214 WR COMB 12PT LNG 7/16 FP 66-153 SCRDR PHLP #1X3 70-105 PNCH PIN 1/8 TIP
11-016 SKT 3/8DR 6PT 1/2 11-220 SKT 3/8DR 6PT 5/8 DP 25-216 WR COMB 12PT LNG 1/2 FP 66-156 SCRDR PHLP #2X4 70-109 PNCH PIN 3/16 TIP
11-018 SKT 3/8DR 6PT 9/16 11-222 SKT 3/8DR 6PT 11/16 DP 25-218 WR COMB 12PT LNG 9/16 FP 66-208 SCRDR SLT 1/4X4 SQ 70-193 PNCH DRFT 3/16 TIP
11-020 SKT 3/8DR 6PT 5/8 11-224 SKT 3/8DR 6PT 3/4 DP 25-220 WR COMB 12PT LNG 5/8 FP 66-217 SCRDR SLT 5/16X6 SQ 70-235 PNCH CNTR 3/8
11-022 SKT 3/8DR 6PT 11/16 11-226 SKT 3/8DR 6PT 13/16 DP 25-222 WR COMB 12PT LNG 11/16 FP 66-220 SCRDR SLT 3/8X8 SQ 70-239 PNCH CNTR 1/2
11-024 SKT 3/8DR 6PT 3/4 11-228 SKT 3/8DR 6PT 7/8 DP 25-224 WR COMB 12PT LNG 3/4 FP 67-109 PLR DIAG CUT 7 HD W/GRP 70-305 CHSL CLD 3/8 TIP
11-026 SKT 3/8DR 6PT 13/16 11-922 EXTEN 3/8DR 3 25-226 WR COMB 12PT LNG 13/16 FP 67-305 PLR CHN NSE 6-1/3 SD CUT W/GRP 70-309 CHSL CLD 1/2 TIP
11-028 SKT 3/8DR 6PT 7/8 11-923 EXTEN 3/8DR 6 25-228 WR COMB 12PT LNG 7/8 FP 67-669 PLR SLP JNT 8 W/GRP 70-313 CHSL CLD 3/4 TIP
11-212 SKT 3/8DR 6PT 3/8 DP 11-947 UNV JNT 3/8DR 28-406 WR ADJ 6 67-779 PLR TNG&GRV 10 W/GRP 67-407 7" LOCKING PLIERS
11-214 SKT 3/8DR 6PT 7/16 DP 11-972 RAT 3/8DR 7-3/8 REPL 11-903 28-410 WR ADJ 10 69-448 HMR BLL PN 1LB WD HDL
Master Set Contents

Set 15-081 131 Pc. Small Tool Set - Tools Only

10-006 SKT 1/4DR 6PT 3/16 10-801 SKT 1/4DR SLT BIT 3/16 25-012 WR COMB 6PT SHT 3/8 FP 28-454 WR ADJ 4 CUSH GRP 67-109 PLR DIAG CUT 7 HD W/GRP
10-007 SKT 1/4DR 6PT 7/32 10-802 SKT 1/4DR SLT BIT 1/4 25-014 WR COMB 6PT SHT 7/16 FP 28-456 WR ADJ 6 CUSH GRP 67-184 PLR DIAG CUT 4-1/2 W/GRP
10-008 SKT 1/4DR 6PT 1/4 10-821 SKT 1/4DR PHLP BIT #1 25-016 WR COMB 6PT SHT 1/2 FP 3121 SET PICK 4PC 67-253 PLR CHN NSE 4-3/4 W/GRP
10-009 SKT 1/4DR 6PT 9/32 10-822 SKT 1/4DR PHLP BIT #2 25-018 WR COMB 6PT SHT 9/16 FP 56131 6 PC T-HDLE BALL PLUS SET 67-257 PLR CHN NSE 6-3/8 W/GRP
10-010 SKT 1/4DR 6PT 5/16 10-823 SKT 1/4DR PHLP BIT #3 25-020 WR COMB 6PT SHT 5/8 FP 56193 13 PC BALL PLUS SET 67-305 PLR CHN NSE 6-1/3 SD CUT W/GRP
10-011 SKT 1/4DR 6PT 11/32 10-918 HDL FLX 1/4DR 5-3/4 25-122 WR COMB 12PT SHT 11/16 FP 66-501 SCRDR SLT 1/4X4 CUSH GRP 67-357 PLR NDL NSE 5-7/16 W/GRP
10-012 SKT 1/4DR 6PT 3/8 10-921 EXTEN 1/4DR 2 25-124 WR COMB 12PT SHT 3/4 FP 66-502 SCRDR SLT 3/16X3 CUSH GRP 67-401 PLR NDL NSE 5-7/8 CURV W/GRP
10-014 SKT 1/4DR 6PT 7/16 10-922 EXTEN 1/4DR 4 27-903 WR ANG OE 13/64 MDGT 66-504 SCRDR SLT 5/16X6 CUSH GRP 67-503 PLR DKBL 8 W/GRP
10-016 SKT 1/4DR 6PT 1/2 10-923 EXTEN 1/4DR 6 15&75D FP 66-505 SCRDR SLT 1/4X4 CUSH GRP 67-717 PLR TNG&GRV 5 W/GRP
10-018 SKT 1/4DR 6PT 9/16 10-925 EXTEN 1/4DR 14 27-904 WR ANG OE 15/64 MDGT 66-507 SCRDR SLT 3/8X8 CUSH GRP 67-779 PLR TNG&GRV 10 W/GRP
10-206 SKT 1/4DR 6PT 3/16 DP 10-929 EXTEN 1/4DR FLX 6 15&75D FP 66-524 SCRDR PHLP #1X3 CUSH GRP 67-901 PLR WIRE STRPR CRMP CUT 8-1/4
10-207 SKT 1/4DR 6PT 7/32 DP 10-935 HDL SPD 1/4DR 15-3/4 27-906 WR ANG OE 3/16 MDGT 15&75D FP 66-527 SCRDR PHLP #2X4 CUSH GRP 68-241 SNIPS MINI 6-1/2
10-208 SKT 1/4DR 6PT 1/4 DP 10-938 HDL T 1/4DR 4-1/2 27-907 WR ANG OE 7/32 MDGT 15&75D FP 66-530 SCRDR PHLP #3X6 CUSH GRP 69-009 HMR SFT FC NO TIP 1-1/2D 12OZ
10-209 SKT 1/4DR 6PT 9/32 DP 10-943 HDL SPIN 1/4DR 6 27-908 WR ANG OE 1/4 MDGT 15&75D FP 66-603 SCRDR OFF 1/4X4 69-155 HMR TIP 1-1/2 THG GREEN (2)
10-210 SKT 1/4DR 6PT 5/16 DP 10-947 UNV JNT 1/4DR 27-909 WR ANG OE 9/32 MDGT 15&75D FP 66-609 SCRDR OFF #1X#2X4-1/2 69-442 HMR BLL PN 4OZ WD HDL
10-211 SKT 1/4DR 6PT 11/32 DP 10-972 RAT 1/4DR 5-9/32 REPL 10-903 27-910 WR ANG OE 5/16 MDGT 15&75D FP 66-806 NUT DR 3/16 HOLL SHFT 67-436 6" LOCKING PLIERS
10-212 SKT 1/4DR 6PT 3/8 DP 25-004 WR COMB 6PT SHT 1/8 FP 27-911 WR ANG OE 11/32 MDGT 66-808 NUT DR 1/4 HOLL SHFT 70-101 PNCH PIN 1/16 TIP
10-214 SKT 1/4DR 6PT 7/16 DP 25-005 WR COMB 6PT SHT 5/32 FP 15&75D FP 66-810 NUT DR 5/16 HOLL SHFT 70-231 PNCH CNTR 1/4
10-216 SKT 1/4DR 6PT 1/2 DP 25-006 WR COMB 6PT SHT 3/16 FP 27-912 WR ANG OE 3/8 MDGT 15&75D FP 66-811 NUT DR 11/32 HOLL SHFT 70-251 PNCH PRCK 1/4
10-218 SKT 1/4DR 6PT 9/16 DP 25-008 WR COMB 6PT SHT 1/4 FP 27-914 WR ANG OE 7/16 MDGT 15&75D FP 66-812 NUT DR 3/8 HOLL SHFT 70-301 CHSL CLD 1/4 TIP
10-408 SKT 1/4DR 4PT 1/4 25-009 WR COMB 6PT SHT 9/32 FP 27-916 WR ANG OE 1/2 MDGT 15&75D FP 66-814 NUT DR 7/16 HOLL SHFT 67-407 7" LOCKING PLIERS
10-410 SKT 1/4DR 8PT 5/16 25-010 WR COMB 6PT SHT 5/16 FP 27-918 WR ANG OE 9/16 MDGT 15&75D FP 66-816 NUT DR 1/2 HOLL SHFT
10-412 SKT 1/4DR 8PT 3/8 25-011 WR COMB 6PT SHT 11/32 FP 27-920 WR ANG OE 5/8 MDGT 15&75D FP 66-933 SCR START PHLP 5

Set 15-087 195 Pc. Master Socket and Wrench Set - Tools Only
10-106 SKT 1/4DR 12PT 3/16 11-114 SKT 3/8DR 12PT 7/16 11-711 SKT 3/8DR HEX BIT 3/16 12-134 SKT 1/2DR 12PT 1-1/16 12-945 RAT SPIN 1/2DR
10-107 SKT 1/4DR 12PT 7/32 11-116 SKT 3/8DR 12PT 1/2 11-712 SKT 3/8DR HEX BIT 7/32 12-136 SKT 1/2DR 12PT 1-1/8 12-947 UNV JNT 1/2DR
10-108 SKT 1/4DR 12PT 1/4 11-118 SKT 3/8DR 12PT 9/16 11-713 SKT 3/8DR HEX BIT 1/4 12-138 SKT 1/2DR 12PT 1-3/16 12-972 RAT 1/2DR 10-1/2 REPL 12-903
10-109 SKT 1/4DR 12PT 9/32 11-120 SKT 3/8DR 12PT 5/8 11-714 SKT 3/8DR HEX BIT 5/16 12-140 SKT 1/2DR 12PT 1-1/4 25-004 WR COMB 6PT SHT 1/8 FP
10-110 SKT 1/4DR 12PT 5/16 11-122 SKT 3/8DR 12PT 11/16 11-715 SKT 3/8DR HEX BIT 3/8 12-312 SKT 1/2DR 12PT 3/8 DP 25-005 WR COMB 6PT SHT 5/32 FP
10-111 SKT 1/4DR 12PT 11/32 11-124 SKT 3/8DR 12PT 3/4 11-918 HDL FLX 3/8DR 8-1/2 12-314 SKT 1/2DR 12PT 7/16 DP 25-006 WR COMB 6PT SHT 3/16 FP
10-112 SKT 1/4DR 12PT 3/8 11-126 SKT 3/8DR 12PT 13/16 11-922 EXTEN 3/8DR 3 12-316 SKT 1/2DR 12PT 1/2 DP 25-008 WR COMB 6PT SHT 1/4 FP
10-114 SKT 1/4DR 12PT 7/16 11-128 SKT 3/8DR 12PT 7/8 11-923 EXTEN 3/8DR 6 12-318 SKT 1/2DR 12PT 9/16 DP 25-009 WR COMB 6PT SHT 9/32 FP
10-116 SKT 1/4DR 12PT 1/2 11-312 SKT 3/8DR 12PT 3/8 DP 11-927 EXTEN 3/8DR 12 12-320 SKT 1/2DR 12PT 5/8 DP 25-010 WR COMB 6PT SHT 5/16 FP
10-118 SKT 1/4DR 12PT 9/16 11-314 SKT 3/8DR 12PT 7/16 DP 11-935 HDL SPD 3/8DR 16-1/2 12-322 SKT 1/2DR 12PT 11/16 DP 25-011 WR COMB 6PT SHT 11/32 FP
10-306 SKT 1/4DR 12PT 3/16 DP 11-316 SKT 3/8DR 12PT 1/2 DP 11-945 RAT SPIN 3/8DR 12-324 SKT 1/2DR 12PT 3/4 DP 25-012 WR COMB 6PT SHT 3/8 FP
10-307 SKT 1/4DR 12PT 7/32 DP 11-318 SKT 3/8DR 12PT 9/16 DP 11-947 UNV JNT 3/8DR 12-326 SKT 1/2DR 12PT 13/16 DP 25-210 WR COMB 12PT LNG 5/16 FP
10-308 SKT 1/4DR 12PT 1/4 DP 11-320 SKT 3/8DR 12PT 5/8 DP 11-972 RAT 3/8DR 7-3/8 REPL 11-903 12-328 SKT 1/2DR 12PT 7/8 DP 25-212 WR COMB 12PT LNG 3/8 FP
10-309 SKT 1/4DR 12PT 9/32 DP 11-322 SKT 3/8DR 12PT 11/16 DP 12-112 SKT 1/2DR 12PT 3/8 12-330 SKT 1/2DR 12PT 15/16 DP 25-214 WR COMB 12PT LNG 7/16 FP
10-310 SKT 1/4DR 12PT 5/16 DP 11-324 SKT 3/8DR 12PT 3/4 DP 12-114 SKT 1/2DR 12PT 7/16 12-332 SKT 1/2DR 12PT 1 DP 25-216 WR COMB 12PT LNG 1/2 FP
10-311 SKT 1/4DR 12PT 11/32 DP 11-326 SKT 3/8DR 12PT 13/16 DP 12-116 SKT 1/2DR 12PT 1/2 12-334 SKT 1/2DR 12PT 1-1/16 DP 25-218 WR COMB 12PT LNG 9/16 FP
10-312 SKT 1/4DR 12PT 3/8 DP 11-328 SKT 3/8DR 12PT 7/8 DP 12-118 SKT 1/2DR 12PT 9/16 12-336 SKT 1/2DR 12PT 1-1/8 DP 25-220 WR COMB 12PT LNG 5/8 FP
10-314 SKT 1/4DR 12PT 7/16 DP 11-408 SKT 3/8DR 8PT 1/4 12-119 SKT 1/2DR 12PT 19/32 12-338 SKT 1/2DR 12PT 1-3/16 DP 25-222 WR COMB 12PT LNG 11/16 FP
10-316 SKT 1/4DR 12PT 1/2 DP 11-410 SKT 3/8DR 8PT 5/16 12-120 SKT 1/2DR 12PT 5/8 12-340 SKT 1/2DR 12PT 1-1/4 DP 25-224 WR COMB 12PT LNG 3/4 FP
10-318 SKT 1/4DR 12PT 9/16 DP 11-412 SKT 3/8DR 8PT 3/8 12-121 SKT 1/2DR 12PT 21/32 12-717 SKT 1/2DR HEX BIT 1/2 25-226 WR COMB 12PT LNG 13/16 FP
10-921 EXTEN 1/4DR 2 11-514 SKT 3/8DR UNV 12PT 7/16 12-122 SKT 1/2DR 12PT 11/16 12-718 SKT 1/2DR HEX BIT 9/16 25-228 WR COMB 12PT LNG 7/8 FP
10-923 EXTEN 1/4DR 6 11-516 SKT 3/8DR UNV 12PT 1/2 12-124 SKT 1/2DR 12PT 3/4 12-719 SKT 1/2DR HEX BIT 5/8 25-230 WR COMB 12PT LNG 15/16 FP
10-943 HDL SPIN 1/4DR 6 11-518 SKT 3/8DR UNV 12PT 9/16 12-125 SKT 1/2DR 12PT 25/32 12-918 HDL FLX 1/2DR 17 25-232 WR COMB 12PT LNG 1 FP
10-945 RAT SPIN 1/4DR 11-520 SKT 3/8DR UNV 12PT 5/8 12-126 SKT 1/2DR 12PT 13/16 12-921 EXTEN 1/2DR 2-1/2 25-234 WR COMB 12PT LNG 1-1/16 FP
10-947 UNV JNT 1/4DR 11-524 SKT 3/8DR UNV 12PT 3/4 12-128 SKT 1/2DR 12PT 7/8 12-923 EXTEN 1/2DR 5 25-236 WR COMB 12PT LNG 1-1/8 FP
10-972 RAT 1/4DR 5-9/32 REPL 10-903 11-708 SKT 3/8DR HEX BIT 1/8 12-130 SKT 1/2DR 12PT 15/16 12-924 EXTEN 1/2DR 10 25-240 WR COMB 12PT LNG 1-1/4 FP
11-112 SKT 3/8DR 12PT 3/8 11-710 SKT 3/8DR HEX BIT 5/32 12-132 SKT 1/2DR 12PT 1 12-935 HDL SPD 1/2DR 19 Continued . .

A-13
 A
Master Set Contents
Set 15-087 195 Pc. Master Socket and Wrench Set Cont.
25-512 WR COMB FLX HD 12PT 3/8 FP 27-510 WR GEARED BOX 12PT 3/8 FP 27-907 WR ANG OE 7/32 MDGT 15&75D FP 28-220 WR COMB FLR NUT 6PT 5/8 FP 66-810 NUT DR 5/16 HOLL SHFT
25-514 WR COMB FLX HD 12PT 7/16 FP 27-511 WR GEARED BOX 12PT 7/16 FP 27-908 WR ANG OE 1/4 MDGT 15&75D FP 28-222 WR COMB FLR NUT 6PT 11/16 FP 66-811 NUT DR 11/32 HOLL SHFT
25-516 WR COMB FLX HD 12PT 1/2 FP 27-512 WR GEARED BOX 12PT 1/2 FP 27-909 WR ANG OE 9/32 MDGT 15&75D FP 28-224 WR COMB FLR NUT 6PT 3/4 FP 66-812 NUT DR 3/8 HOLL SHFT
25-518 WR COMB FLX HD 12PT 9/16 FP 27-513 WR GEARED BOX 12PT 9/16 FP 27-910 WR ANG OE 5/16 MDGT 15&75D FP 28-408 WR ADJ 8 66-814 NUT DR 7/16 HOLL SHFT
25-520 WR COMB FLX HD 12PT 5/8 FP 27-514 WR GEARED BOX 12PT 5/8 FP 27-911 WR ANG OE 11/32 MDGT 28-410 WR ADJ 10 66-816 NUT DR 1/2 HOLL SHFT
25-522 WR COMB FLX HD 12PT 11/16 FP 27-515 WR GEARED BOX 12PT 11/16 FP 15&75D FP 28-412 WR ADJ 12 66-818 NUT DR 9/16 HOLL SHFT
25-524 WR COMB FLX HD 12PT 3/4 FP 27-516 WR GEARED BOX 12PT 3/4 FP 27-912 WR ANG OE 3/8 MDGT 15&75D FP 56193 13 PC BALL PLUS SET 66-820 NUT DR 5/8 HOLL SHFT
27-143 WR BX 12PT SHT 3/8X7/16 FP 27-903 WR ANG OE 13/64 MDGT 28-212 WR COMB FLR NUT 6PT 3/8 FP 66-806 NUT DR 3/16 HOLL SHFT 67-830 PLR IGNITION 5-1/4 W/GRP
27-167 WR BX 12PT SHT 1/2X9/16 FP 15&75D FP 28-214 WR COMB FLR NUT 6PT 7/16 FP 66-807 NUT DR 7/32 HOLL SHFT
27-194 WR BX 12PT SHT 5/8X11/16 FP 27-904 WR ANG OE 15/64 MDGT 28-216 WR COMB FLR NUT 6PT 1/2 FP 66-808 NUT DR 1/4 HOLL SHFT
27-206 WR BX 12PT SHT 11/16X3/4 FP 15&75D FP 28-218 WR COMB FLR NUT 6PT 9/16 FP 66-809 NUT DR 9/32 HOLL SHFT

Set 15-091 71 Pc. Heavy Equipment Set - Tools Only

13-142 SKT 3/4DR 12PT 1-5/16 13-242 SKT 3/4DR 6PT 1-5/16 DP 14-170 SKT 1DR 12PT 2-3/16 14-951 ADP 1DR 1FX3/4M 28-418 WR ADJ 18
13-144 SKT 3/4DR 12PT 1-3/8 13-244 SKT 3/4DR 6PT 1-3/8 DP 14-172 SKT 1DR 12PT 2-1/4 25-232 WR COMB 12PT LNG 1 FP 28-424 WR ADJ 24
13-146 SKT 3/4DR 12PT 1-7/16 13-246 SKT 3/4DR 6PT 1-7/16 DP 14-176 SKT 1DR 12PT 2-3/8 25-234 WR COMB 12PT LNG 1-1/16 FP 69-452 HMR BLL PN 2LB WD HDL
13-148 SKT 3/4DR 12PT 1-1/2 13-248 SKT 3/4DR 6PT 1-1/2 DP 14-180 SKT 1DR 12PT 2-1/2 25-236 WR COMB 12PT LNG 1-1/8 FP 69-454 HMR BLL PN 2-1/2LB WD HDL
13-150 SKT 3/4DR 12PT 1-9/16 13-252 SKT 3/4DR 6PT 1-5/8 DP 14-182 SKT 1DR 12PT 2-9/16 25-240 WR COMB 12PT LNG 1-1/4 FP 69-513 HMR BRS 1.5LB W/GRP
13-152 SKT 3/4DR 12PT 1-5/8 13-918 HDL FLX 3/4DR 22 14-184 SKT 1DR 12PT 2-5/8 25-242 WR COMB 12PT LNG 1-5/16 70-503 ALIGNING BAR PINCH 5/8X16
13-154 SKT 3/4DR 12PT 1-11/16 13-922 EXTEN 3/4DR 5 14-188 SKT 1DR 12PT 2-3/4 25-244 WR COMB 12PT LNG 1-3/8 70-507 ALIGNING BAR PINCH 7/8X30
13-156 SKT 3/4DR 12PT 1-3/4 13-923 EXTEN 3/4DR 8 14-194 SKT 1DR 12PT 2-15/16 25-246 WR COMB 12PT LNG 1-7/16 70-519 CHSL BAR ROLL1/2X15
13-158 SKT 3/4DR 12PT 1-13/16 13-925 EXTEN 3/4DR 16 14-196 SKT 1DR 12PT 3 25-248 WR COMB 12PT LNG 1-1/2 70-521 CHSL BAR ROLL 5/8X18
13-160 SKT 3/4DR 12PT 1-7/8 13-938 HDL T 3/4DR 17-1/2 14-200 SKT 1DR 12PT 3-1/8 25-252 WR COMB 12PT LNG 1-5/8 72-423 PULL STD 13 TON 2 JAW
13-164 SKT 3/4DR 12PT 2 13-947 UNV JNT 3/4DR 14-212 SKT 1DR 12PT 3-1/2 25-254 WR COMB 12PT LNG 1-11/16 72-453 BEAR SEP 4-5/8
13-168 SKT 3/4DR 12PT 2-1/8 13-951 ADP 3/4DR 3/4FX1/2M 14-924 EXTEN 1DR 9 25-256 WR COMB 12PT LNG 1-3/4 71-516 BEAR SEP
13-170 SKT 3/4DR 12PT 2-3/16 13-952 ADP 3/4DR 3/4FX1M 14-926 EXTEN 1DR 18 25-258 WR COMB 12PT LNG 1-13/16

Master Set Contents

13-172 SKT 3/4DR 12PT 2-1/4 13-972 RAT 3/4DR 19 14-939 HDL SLID T 1DR 20 25-260 WR COMB 12PT LNG 1-7/8
13-176 SKT 3/4DR 12PT 2-3/8 14-164 SKT 1DR 12PT 2 14-940 ADP 1DR FOR 14-939 25-264 WR COMB 12PT LNG 2

Set 15-097 94 Pc. Heavy Equipment Set - Tools Only

67-410 10" LOCKING PLIERS 12-116 SKT 1/2DR 12PT 1/2 13-136 SKT 3/4DR 12PT 1-1/8 25-216 WR COMB 12PT LNG 1/2 FP 66-106 SCRDR SLT 3/8X8
11-108 SKT 3/8DR 12PT 1/4 12-118 SKT 1/2DR 12PT 9/16 13-140 SKT 3/4DR 12PT 1-1/4 25-218 WR COMB 12PT LNG 9/16 FP 66-258 SCRDR CAB 1/8X6
11-110 SKT 3/8DR 12PT 5/16 12-120 SKT 1/2DR 12PT 5/8 13-142 SKT 3/4DR 12PT 1-5/16 25-220 WR COMB 12PT LNG 5/8 FP 67-163 PLR DIAG CUT 7-1/2 W/GRP
11-112 SKT 3/8DR 12PT 3/8 12-122 SKT 1/2DR 12PT 11/16 13-148 SKT 3/4DR 12PT 1-1/2 25-222 WR COMB 12PT LNG 11/16 FP 67-305 PLR CHN NSE 6-1/3 SD CUT
11-114 SKT 3/8DR 12PT 7/16 12-124 SKT 1/2DR 12PT 3/4 13-152 SKT 3/4DR 12PT 1-5/8 25-224 WR COMB 12PT LNG 3/4 FP W/GRP
11-116 SKT 3/8DR 12PT 1/2 12-126 SKT 1/2DR 12PT 13/16 13-154 SKT 3/4DR 12PT 1-11/16 25-226 WR COMB 12PT LNG 13/16 FP 67-657 PLR SLP JNT 6-1/2
11-118 SKT 3/8DR 12PT 9/16 12-128 SKT 1/2DR 12PT 7/8 13-156 SKT 3/4DR 12PT 1-3/4 25-228 WR COMB 12PT LNG 7/8 FP 67-779 PLR TNG&GRV 10 W/GRP
11-120 SKT 3/8DR 12PT 5/8 12-130 SKT 1/2DR 12PT 15/16 13-160 SKT 3/4DR 12PT 1-7/8 25-230 WR COMB 12PT LNG 15/16 FP 69-019 HMR SFT FC NO TIP 2D 2LB
11-124 SKT 3/8DR 12PT 3/4 12-132 SKT 1/2DR 12PT 1 13-164 SKT 3/4DR 12PT 2 25-232 WR COMB 12PT LNG 1 FP 69-166 HMR TIP 2 MED HD CREAM
11-514 SKT 3/8DR UNV 12PT 7/16 12-918 HDL FLX 1/2DR 17 13-168 SKT 3/4DR 12PT 2-1/8 25-234 WR COMB 12PT LNG 1-1/16 FP 69-446 HMR BLL PN 12OZ WD HDL
11-516 SKT 3/8DR UNV 12PT 1/2 12-924 EXTEN 1/2DR 10 13-170 SKT 3/4DR 12PT 2-3/16 25-236 WR COMB 12PT LNG 1-1/8 FP 69-452 HMR BLL PN 2LB WD HDL
11-518 SKT 3/8DR UNV 12PT 9/16 12-947 UNV JNT 1/2DR 13-172 SKT 3/4DR 12PT 2-1/4 25-240 WR COMB 12PT LNG 1-1/4 FP 70-189 PNCH DRFT 1/8 TIP
11-520 SKT 3/8DR UNV 12PT 5/8 12-951 ADP 1/2DR 1/2FX3/8M 13-918 HDL FLX 3/4DR 22 25-242 WR COMB 12PT LNG 1-5/16 70-201 PNCH DRFT 3/8 TIP
11-524 SKT 3/8DR UNV 12PT 3/4 12-952 ADP 1/2DR 1/2FX3/4M 13-923 EXTEN 3/4DR 8 25-244 WR COMB 12PT LNG 1-3/8 70-237 PNCH CTR 7/16
11-922 EXTEN 3/8DR 3 12-972 RAT 1/2DR 10-1/2 REPL 12-903 13-972 RAT 3/4DR 19 25-248 WR COMB 12PT LNG 1-1/2 70-305 CHSL CLD 3/8 TIP
11-925 EXTEN 3/8DR 8 13-128 SKT 3/4DR 12PT 7/8 25-208 WR COMB 12PT LNG 1/4 FP 25-252 WR COMB 12PT LNG 1-5/8 70-315 CHSL CLD 7/8 TIP
11-935 HDL SPD 3/8DR 16-1/2 13-130 SKT 3/4DR 12PT 15/16 25-210 WR COMB 12PT LNG 5/16 FP 27-667 WR TAPPET 1/2X9/16 FP 70-519 CHSL BAR ROLL1/2X15
11-952 ADP 3/8DR 3/8FX1/2M 13-132 SKT 3/4DR 12PT 1 25-212 WR COMB 12PT LNG 3/8 FP 485 GASKET SCRAPER 70-793 SET FEELER GAUGE 25 BLADE
11-972 RAT 3/8DR 7-3/8 REPL 11-903 13-134 SKT 3/4DR 12PT 1-1/16 25-214 WR COMB 12PT LNG 7/16 FP 66-103 SCRDR SLT 5/16X6

Set 44-002 111 Pc. Metric Add-on Set - Tools Only

37-004 SKT 1/4DR 6PT 4MM 37-213 SKT 1/4DR 6PT 13MM DP 38-316 SKT 3/8DR 12PT 16MM DP 39-121 SKT 1/2DR 12PT 21MM 52-207 WR COMB 12PT LNG 7MM FP
37-005 SKT 1/4DR 6PT 5MM 37-214 SKT 1/4DR 6PT 14MM DP 38-317 SKT 3/8DR 12PT 17MM DP 39-122 SKT 1/2DR 12PT 22MM 52-208 WR COMB 12PT LNG 8MM FP
37-006 SKT 1/4DR 6PT 6MM 37-283 SKT 1/4DR 6PT 5.5MM DP 38-318 SKT 3/8DR 12PT 18MM DP 39-123 SKT 1/2DR 12PT 23MM 52-209 WR COMB 12PT LNG 9MM FP
37-007 SKT 1/4DR 6PT 7MM 38-108 SKT 3/8DR 12PT 8MM 38-319 SKT 3/8DR 12PT 19MM DP 39-124 SKT 1/2DR 12PT 24MM 52-210 WR COMB 12PT LNG 10MM FP
37-008 SKT 1/4DR 6PT 8MM 38-109 SKT 3/8DR 12PT 9MM 38-707 SKT 3/8DR HEX BIT 4MM 39-310 SKT 1/2DR 12PT 10MM DP 52-211 WR COMB 12PT LNG 11MM FP
37-009 SKT 1/4DR 6PT 9MM 38-110 SKT 3/8DR 12PT 10MM 38-709 SKT 3/8DR HEX BIT 5MM 39-311 SKT 1/2DR 12PT 11MM DP 52-212 WR COMB 12PT LNG 12MM FP
37-010 SKT 1/4DR 6PT 10MM 38-111 SKT 3/8DR 12PT 11MM 38-711 SKT 3/8DR HEX BIT 6MM 39-312 SKT 1/2DR 12PT 12MM DP 52-213 WR COMB 12PT LNG 13MM FP
37-011 SKT 1/4DR 6PT 11MM 38-112 SKT 3/8DR 12PT 12MM 38-712 SKT 3/8DR HEX BIT 7MM 39-313 SKT 1/2DR 12PT 13MM DP 52-214 WR COMB 12PT LNG 14MM FP
37-012 SKT 1/4DR 6PT 12MM 38-113 SKT 3/8DR 12PT 13MM 38-713 SKT 3/8DR HEX BIT 8MM 39-314 SKT 1/2DR 12PT 14MM DP 52-215 WR COMB 12PT LNG 15MM FP
37-013 SKT 1/4DR 6PT 13MM 38-114 SKT 3/8DR 12PT 14MM 38-715 SKT 3/8DR HEX BIT 10MM 39-315 SKT 1/2DR 12PT 15MM DP 52-216 WR COMB 12PT LNG 16MM FP
37-014 SKT 1/4DR 6PT 14MM 38-115 SKT 3/8DR 12PT 15MM 39-110 SKT 1/2DR 12PT 10MM 39-316 SKT 1/2DR 12PT 16MM DP 52-217 WR COMB 12PT LNG 17MM FP
37-083 SKT 1/4DR 6PT 5.5MM 38-116 SKT 3/8DR 12PT 16MM 39-111 SKT 1/2DR 12PT 11MM 39-317 SKT 1/2DR 12PT 17MM DP 52-218 WR COMB 12PT LNG 18MM FP
37-204 SKT 1/4DR 6PT 4MM DP 38-117 SKT 3/8DR 12PT 17MM 39-112 SKT 1/2DR 12PT 12MM 39-318 SKT 1/2DR 12PT 18MM DP 52-219 WR COMB 12PT LNG 19MM FP
37-205 SKT 1/4DR 6PT 5MM DP 38-118 SKT 3/8DR 12PT 18MM 39-113 SKT 1/2DR 12PT 13MM 39-319 SKT 1/2DR 12PT 19MM DP 52-220 WR COMB 12PT LNG 20MM FP
37-206 SKT 1/4DR 6PT 6MM DP 38-119 SKT 3/8DR 12PT 19MM 39-114 SKT 1/2DR 12PT 14MM 39-320 SKT 1/2DR 12PT 20MM DP 52-221 WR COMB 12PT LNG 21MM FP
37-207 SKT 1/4DR 6PT 7MM DP 38-310 SKT 3/8DR 12PT 10MM DP 39-115 SKT 1/2DR 12PT 15MM 39-321 SKT 1/2DR 12PT 21MM DP 52-222 WR COMB 12PT LNG 22MM FP
37-208 SKT 1/4DR 6PT 8MM DP 38-311 SKT 3/8DR 12PT 11MM DP 39-116 SKT 1/2DR 12PT 16MM 39-322 SKT 1/2DR 12PT 22MM DP 52-223 WR COMB 12PT LNG 23MM FP
37-209 SKT 1/4DR 6PT 9MM DP 38-312 SKT 3/8DR 12PT 12MM DP 39-117 SKT 1/2DR 12PT 17MM 39-324 SKT 1/2DR 12PT 24MM DP 52-224 WR COMB 12PT LNG 24MM FP
37-210 SKT 1/4DR 6PT 10MM DP 38-313 SKT 3/8DR 12PT 13MM DP 39-118 SKT 1/2DR 12PT 18MM 39-717 SKT 1/2DR HEX BIT 12MM 56194 9 PC METRIC BALL PLUS SET
37-211 SKT 1/4DR 6PT 11MM DP 38-314 SKT 3/8DR 12PT 14MM DP 39-119 SKT 1/2DR 12PT 19MM 39-719 SKT 1/2DR HEX BIT 14MM
37-212 SKT 1/4DR 6PT 12MM DP 38-315 SKT 3/8DR 12PT 15MM DP 39-120 SKT 1/2DR 12PT 20MM 39-722 SKT 1/2DR HEX BIT 17MM

A-14
 A
Master Set Contents
Set 44-007 248 Pc. Metric Intermediate Set - Tools Only
10-918 HDL FLX 1/4DR 5-3/4 38-116 SKT 3/8DR 12PT 16MM 39-325 SKT 1/2DR 12PT 25MM DP 53-142 WR OE 24X26MM FP 68-030 PLR RET RNG CONV .047 90D
10-921 EXTEN 1/4DR 2 38-117 SKT 3/8DR 12PT 17MM 39-326 SKT 1/2DR 12PT 26MM DP 54-510 WR GEARED BOX 12PT 10MM FP 68-031 PLR RET RNG CONV .070 0D
10-923 EXTEN 1/4DR 6 38-118 SKT 3/8DR 12PT 18MM 39-717 SKT 1/2DR HEX BIT 12MM 54-511 WR GEARED BOX 12PT 11MM FP 68-032 PLR RET RNG CONV .070 45D
10-943 HDL SPIN 1/4DR 6 38-119 SKT 3/8DR 12PT 19MM 39-719 SKT 1/2DR HEX BIT 14MM 54-512 WR GEARED BOX 12PT 12MM FP 68-033 PLR RET RNG CONV .070 90D
10-947 UNV JNT 1/4DR 38-308 SKT 3/8DR 12PT 8MM DP 39-722 SKT 1/2DR HEX BIT 17MM 54-513 WR GEARED BOX 12PT 13MM FP 68-034 PLR RET RNG CONV .090 0D
10-972 RAT 1/4DR 5-9/32 REPL 10-903 38-309 SKT 3/8DR 12PT 9MM DP 40-123 SKT 3/4DR 12PT 23MM 54-514 WR GEARED BOX 12PT 14MM FP 68-035 PLR RET RNG CONV .090 45D
67-410 10" LOCKING PLIERS 38-310 SKT 3/8DR 12PT 10MM DP 40-124 SKT 3/4DR 12PT 24MM 54-515 WR GEARED BOX 12PT 15MM FP 68-036 PLR RET RNG CONV .090 90D
11-918 HDL FLX 3/8DR 8-1/2 38-311 SKT 3/8DR 12PT 11MM DP 40-125 SKT 3/4DR 12PT 25MM 54-516 WR GEARED BOX 12PT 16MM FP 68-241 SNIPS MINI 6-1/2
11-922 EXTEN 3/8DR 3 38-312 SKT 3/8DR 12PT 12MM DP 40-126 SKT 3/4DR 12PT 26MM 54-517 WR GEARED BOX 12PT 17MM FP 68-255 SNIPS AVN 10 STRT
11-923 EXTEN 3/8DR 6 38-313 SKT 3/8DR 12PT 13MM DP 40-127 SKT 3/4DR 12PT 27MM 54-518 WR GEARED BOX 12PT 18MM FP 68-310 KNFE UTIL RETRACT
11-947 UNV JNT 3/8DR 38-314 SKT 3/8DR 12PT 14MM DP 40-128 SKT 3/4DR 12PT 28MM 54-519 WR GEARED BOX 12PT 19MM FP 68-445 TP MEAS 1X25 LCK AUTO
11-972 RAT 3/8DR 7-3/8 REPL 11-903 38-315 SKT 3/8DR 12PT 15MM DP 40-129 SKT 3/4DR 12PT 29MM 56194 9 PC METRIC BALL PLUS SET 69-448 HMR BLL PN 1LB WD HDL
12-918 HDL FLX 1/2DR 17 38-316 SKT 3/8DR 12PT 16MM DP 40-130 SKT 3/4DR 12PT 30MM 66-150 SCRDR PHLP #2X1-1/2 69-452 HMR BLL PN 2LB WD HDL
12-921 EXTEN 1/2DR 2-1/2 38-317 SKT 3/8DR 12PT 17MM DP 40-132 SKT 3/4DR 12PT 32MM 66-152 SCRDR PHLP #0X2-1/2 69-513 HMR BRS 1.5LB W/GRP
12-923 EXTEN 1/2DR 5 38-318 SKT 3/8DR 12PT 18MM DP 40-135 SKT 3/4DR 12PT 35MM 66-153 SCRDR PHLP #1X3 69-532 HMR DEAD BLOW STD 21OZ
12-924 EXTEN 1/2DR 10 38-319 SKT 3/8DR 12PT 19MM DP 40-136 SKT 3/4DR 12PT 36MM 66-156 SCRDR PHLP #2X4 70-000 PUNCH & CHISEL HOLDER
12-935 HDL SPD 1/2DR 19 38-707 SKT 3/8DR HEX BIT 4MM 40-138 SKT 3/4DR 12PT 38MM 66-161 SCRDR PHLP #3X6 70-103 PNCH PIN 3/32 TIP
12-947 UNV JNT 1/2DR 38-709 SKT 3/8DR HEX BIT 5MM 40-141 SKT 3/4DR 12PT 41MM 66-164 SCRDR PHLP #4X8 70-105 PNCH PIN 1/8 TIP
12-972 RAT 1/2DR 10-1/2 REPL 12-903 38-711 SKT 3/8DR HEX BIT 6MM 40-142 SKT 3/4DR 12PT 42MM 66-203 SCRDR SLT 3/16X4 SQ 70-109 PNCH PIN 3/16 TIP
13-918 HDL FLX 3/4DR 22 38-712 SKT 3/8DR HEX BIT 7MM 40-146 SKT 3/4DR 12PT 46MM 66-208 SCRDR SLT 1/4X4 SQ 70-153 PNCH START 1/16 TIP
13-923 EXTEN 3/4DR 8 38-713 SKT 3/8DR HEX BIT 8MM 485 GASKET SCRAPER 66-217 SCRDR SLT 5/16X6 SQ 70-157 PNCH START 1/8 TIP
13-925 EXTEN 3/4DR 16 38-714 SKT 3/8DR HEX BIT 9MM 52-207 WR COMB 12PT LNG 7MM FP 66-220 SCRDR SLT 3/8X8 SQ 70-161 PNCH START 3/16 TIP
13-972 RAT 3/4DR 19 38-715 SKT 3/8DR HEX BIT 10MM 52-208 WR COMB 12PT LNG 8MM FP 66-226 SCRDR SLT 7/16X12 SQ 70-235 PNCH CNTR 3/8
28-406 WR ADJ 6 39-110 SKT 1/2DR 12PT 10MM 52-209 WR COMB 12PT LNG 9MM FP 66-232 SCRDR SLT 1/4X1-1/2 SQ 70-303 CHSL CLD 5/16 TIP
28-408 WR ADJ 8 39-111 SKT 1/2DR 12PT 11MM 52-210 WR COMB 12PT LNG 10MM FP 66-831 NUT DR 5MM HOLL SHFT 70-307 CHSL CLD 7/16 TIP
28-410 WR ADJ 10 39-112 SKT 1/2DR 12PT 12MM 52-211 WR COMB 12PT LNG 11MM FP 66-832 NUT DR 5.5MM HOLL SHFT 70-309 CHSL CLD 1/2 TIP
28-412 WR ADJ 12 39-113 SKT 1/2DR 12PT 13MM 52-212 WR COMB 12PT LNG 12MM FP 66-833 NUT DR 6MM HOLL SHFT 70-393 CHSL CAPE 7/32 TIP
3470 HOOK & PIN PULLER 39-114 SKT 1/2DR 12PT 14MM 52-213 WR COMB 12PT LNG 13MM FP 66-834 NUT DR 7MM HOLL SHFT 70-421 CHSL DIA PT 3/16 TIP
37-004 SKT 1/4DR 6PT 4MM 39-115 SKT 1/2DR 12PT 15MM 52-214 WR COMB 12PT LNG 14MM FP 66-835 NUT DR 8MM HOLL SHFT 70-503 ALIGNING BAR PINCH 5/8X16
37-005 SKT 1/4DR 6PT 5MM 39-116 SKT 1/2DR 12PT 16MM 52-215 WR COMB 12PT LNG 15MM FP 66-836 NUT DR 9MM HOLL SHFT 70-519 CHSL BAR ROLL1/2X15
Master Set Contents

37-006 SKT 1/4DR 6PT 6MM 39-117 SKT 1/2DR 12PT 17MM 52-216 WR COMB 12PT LNG 16MM FP 66-837 NUT DR 10MM HOLL SHFT 70-865 HCKS FLT FRM
37-007 SKT 1/4DR 6PT 7MM 39-118 SKT 1/2DR 12PT 18MM 52-217 WR COMB 12PT LNG 17MM FP 67-067 PLR LNMN 8-1/2 W/GRP 70-929 TELESCP MIRROR 2-1/8 DIA
37-008 SKT 1/4DR 6PT 8MM 39-119 SKT 1/2DR 12PT 19MM 52-218 WR COMB 12PT LNG 18MM FP 67-109 PLR DIAG CUT 7 HD W/GRP 70-933 RETR TL MAG TELESCP
37-009 SKT 1/4DR 6PT 9MM 39-120 SKT 1/2DR 12PT 20MM 52-219 WR COMB 12PT LNG 19MM FP 67-161 PLR DIAG CUT 6-3/8 W/GRP 70-950 SCR EXTR 1/8
37-010 SKT 1/4DR 6PT 10MM 39-121 SKT 1/2DR 12PT 21MM 52-220 WR COMB 12PT LNG 20MM FP 67-305 PLR CHN NSE 6-1/3 SD CUT W/GRP 70-952 SCR EXTR 3/16
37-011 SKT 1/4DR 6PT 11MM 39-122 SKT 1/2DR 12PT 22MM 52-221 WR COMB 12PT LNG 21MM FP 67-357 PLR NDL NSE 5-7/16 W/GRP 70-954 SCR EXTR 15/64
37-012 SKT 1/4DR 6PT 12MM 39-123 SKT 1/2DR 12PT 23MM 52-222 WR COMB 12PT LNG 22MM FP 67-401 PLR NDL NSE 5-7/8 CURV W/GRP 70-956 SCR EXTR 5/16
37-013 SKT 1/4DR 6PT 13MM 39-124 SKT 1/2DR 12PT 24MM 52-223 WR COMB 12PT LNG 23MM FP 67-503 PLR DKBL 8 W/GRP 70-958 SCR EXTR 3/8
37-014 SKT 1/4DR 6PT 14MM 39-125 SKT 1/2DR 12PT 25MM 52-224 WR COMB 12PT LNG 24MM FP 67-535 PLR END CUT 7-3/8 W/GRP 70-960 SCR EXTR 15/32
37-083 SKT 1/4DR 6PT 5.5MM 39-126 SKT 1/2DR 12PT 26MM 53-016 WR OE 6X7MM FP 67-669 PLR SLP JNT 8 W/GRP 70-962 SCR EXTR 9/16
38-108 SKT 3/8DR 12PT 8MM 39-316 SKT 1/2DR 12PT 16MM DP 53-022 WR OE 8X9MM FP 67-779 PLR TNG&GRV 10 W/GRP 70-964 SCR EXTR 21/32
38-109 SKT 3/8DR 12PT 9MM 39-317 SKT 1/2DR 12PT 17MM DP 53-034 WR OE 10X11MM FP 67-783 PLR TNG&GRV 16 W/GRP 70-966 SCR EXTR 13/16
38-110 SKT 3/8DR 12PT 10MM 39-318 SKT 1/2DR 12PT 18MM DP 53-052 WR OE 12X13MM FP 67-901 PLR WIRE STRPR CRMP CUT 8-1/4 73-010 WR PIPE 10 HD
38-111 SKT 3/8DR 12PT 11MM 39-319 SKT 1/2DR 12PT 19MM DP 53-067 WR OE 14X15MM FP 68-025 PLR RET RNG CONV .038 0D 73-014 WR PIPE 14 HD
38-112 SKT 3/8DR 12PT 12MM 39-320 SKT 1/2DR 12PT 20MM DP 53-082 WR OE 16X17MM FP 68-026 PLR RET RNG CONV .038 45D 73-018 WR PIPE 18 HD
38-113 SKT 3/8DR 12PT 13MM 39-321 SKT 1/2DR 12PT 21MM DP 53-096 WR OE 18X19MM FP 68-027 PLR RET RNG CONV .038 90D 78-404 C-CL THRT DP 4 STD SCREW
38-114 SKT 3/8DR 12PT 14MM 39-322 SKT 1/2DR 12PT 22MM DP 53-115 WR OE 20X22MM FP 68-028 PLR RET RNG CONV .047 0D BLK (2)
38-115 SKT 3/8DR 12PT 15MM 39-324 SKT 1/2DR 12PT 24MM DP 53-119 WR OE 21X23MM FP 68-029 PLR RET RNG CONV .047 45D 67-407 7" LOCKING PLIERS

Set 44-012 355 Pc. Metric Master Set - Tools Only

10-918 HDL FLX 1/4DR 5-3/4 37-004 SKT 1/4DR 6PT 4MM 38-113 SKT 3/8DR 12PT 13MM 38-856 WR 3/8DR CRFT 16 MM 39-318 SKT 1/2DR 12PT 18MM DP
10-921 EXTEN 1/4DR 2 37-005 SKT 1/4DR 6PT 5MM 38-114 SKT 3/8DR 12PT 14MM 38-857 WR 3/8DR CRFT 17 MM 39-319 SKT 1/2DR 12PT 19MM DP
10-923 EXTEN 1/4DR 6 37-006 SKT 1/4DR 6PT 6MM 38-115 SKT 3/8DR 12PT 15MM 38-858 WR 3/8DR CRFT 18 MM 39-320 SKT 1/2DR 12PT 20MM DP
10-935 HDL SPD 1/4DR 15-3/4 37-007 SKT 1/4DR 6PT 7MM 38-116 SKT 3/8DR 12PT 16MM 38-859 WR 3/8DR CRFT 19 MM 39-321 SKT 1/2DR 12PT 21MM DP
10-943 HDL SPIN 1/4DR 6 37-008 SKT 1/4DR 6PT 8MM 38-117 SKT 3/8DR 12PT 17MM 38-861 WR 3/8DR CRFT 21 MM 39-322 SKT 1/2DR 12PT 22MM DP
10-947 UNV JNT 1/4DR 37-009 SKT 1/4DR 6PT 9MM 38-118 SKT 3/8DR 12PT 18MM 38-862 WR 3/8DR CRFT 22 MM 39-324 SKT 1/2DR 12PT 24MM DP
10-972 RAT 1/4DR 5-9/32 REPL 10-903 37-010 SKT 1/4DR 6PT 10MM 38-119 SKT 3/8DR 12PT 19MM 39-110 SKT 1/2DR 12PT 10MM 39-325 SKT 1/2DR 12PT 25MM DP
67-410 10" LOCKING PLIERS 37-011 SKT 1/4DR 6PT 11MM 38-120 SKT 3/8DR 12PT 20MM 39-111 SKT 1/2DR 12PT 11MM 39-326 SKT 1/2DR 12PT 26MM DP
11-802 SKT 3/8DR SLT BIT 1/4 37-012 SKT 1/4DR 6PT 12MM 38-121 SKT 3/8DR 12PT 21MM 39-112 SKT 1/2DR 12PT 12MM 39-711 SKT 1/2DR HEX BIT 6MM
11-822 SKT 3/8DR PHLP BIT #2 37-013 SKT 1/4DR 6PT 13MM 38-122 SKT 3/8DR 12PT 22MM 39-113 SKT 1/2DR 12PT 13MM 39-713 SKT 1/2DR HEX BIT 8MM
11-825 SKT 3/8DR PHLP BIT #3 37-014 SKT 1/4DR 6PT 14MM 38-306 SKT 3/8DR 12PT 6MM DP 39-114 SKT 1/2DR 12PT 14MM 39-715 SKT 1/2DR HEX BIT 10MM
11-828 SKT 3/8DR PHLP BIT #4 37-083 SKT 1/4DR 6PT 5.5MM 38-307 SKT 3/8DR 12PT 7MM DP 39-115 SKT 1/2DR 12PT 15MM 39-717 SKT 1/2DR HEX BIT 12MM
11-918 HDL FLX 3/8DR 8-1/2 37-204 SKT 1/4DR 6PT 4MM DP 38-308 SKT 3/8DR 12PT 8MM DP 39-116 SKT 1/2DR 12PT 16MM 39-719 SKT 1/2DR HEX BIT 14MM
11-922 EXTEN 3/8DR 3 37-205 SKT 1/4DR 6PT 5MM DP 38-309 SKT 3/8DR 12PT 9MM DP 39-117 SKT 1/2DR 12PT 17MM 39-722 SKT 1/2DR HEX BIT 17MM
11-923 EXTEN 3/8DR 6 37-206 SKT 1/4DR 6PT 6MM DP 38-310 SKT 3/8DR 12PT 10MM DP 39-118 SKT 1/2DR 12PT 18MM 485 GASKET SCRAPER
11-927 EXTEN 3/8DR 12 37-207 SKT 1/4DR 6PT 7MM DP 38-311 SKT 3/8DR 12PT 11MM DP 39-119 SKT 1/2DR 12PT 19MM 52-207 WR COMB 12PT LNG 7MM FP
11-929 EXTEN FLX 3/8DR 7-1/4 37-208 SKT 1/4DR 6PT 8MM DP 38-312 SKT 3/8DR 12PT 12MM DP 39-120 SKT 1/2DR 12PT 20MM 52-208 WR COMB 12PT LNG 8MM FP
11-935 HDL SPD 3/8DR 16-1/2 37-209 SKT 1/4DR 6PT 9MM DP 38-313 SKT 3/8DR 12PT 13MM DP 39-121 SKT 1/2DR 12PT 21MM 52-209 WR COMB 12PT LNG 9MM FP
11-938 HDL T 3/8DR 8 37-210 SKT 1/4DR 6PT 10MM DP 38-314 SKT 3/8DR 12PT 14MM DP 39-122 SKT 1/2DR 12PT 22MM 52-210 WR COMB 12PT LNG 10MM FP
11-947 UNV JNT 3/8DR 37-211 SKT 1/4DR 6PT 11MM DP 38-315 SKT 3/8DR 12PT 15MM DP 39-123 SKT 1/2DR 12PT 23MM 52-211 WR COMB 12PT LNG 11MM FP
11-972 RAT 3/8DR 7-3/8 REPL 11-903 37-212 SKT 1/4DR 6PT 12MM DP 38-316 SKT 3/8DR 12PT 16MM DP 39-124 SKT 1/2DR 12PT 24MM 52-212 WR COMB 12PT LNG 12MM FP
11-974 RAT 3/8DR FLX 9-1/2 37-213 SKT 1/4DR 6PT 13MM DP 38-317 SKT 3/8DR 12PT 17MM DP 39-125 SKT 1/2DR 12PT 25MM 52-213 WR COMB 12PT LNG 13MM FP
12-918 HDL FLX 1/2DR 17 37-214 SKT 1/4DR 6PT 14MM DP 38-318 SKT 3/8DR 12PT 18MM DP 39-126 SKT 1/2DR 12PT 26MM 52-214 WR COMB 12PT LNG 14MM FP
12-921 EXTEN 1/2DR 2-1/2 37-283 SKT 1/4DR 6PT 5.5MM DP 38-319 SKT 3/8DR 12PT 19MM DP 39-127 SKT 1/2DR 12PT 27MM 52-215 WR COMB 12PT LNG 15MM FP
12-923 EXTEN 1/2DR 5 37-703 SKT 1/4DR HEX BIT 2MM 38-707 SKT 3/8DR HEX BIT 4MM 39-128 SKT 1/2DR 12PT 28MM 52-216 WR COMB 12PT LNG 16MM FP
12-924 EXTEN 1/2DR 10 37-704 SKT 1/4DR HEX BIT 2.5MM 38-709 SKT 3/8DR HEX BIT 5MM 39-129 SKT 1/2DR 12PT 29MM 52-217 WR COMB 12PT LNG 17MM FP
12-935 HDL SPD 1/2DR 19 37-705 SKT 1/4DR HEX BIT 3MM 38-711 SKT 3/8DR HEX BIT 6MM 39-130 SKT 1/2DR 12PT 30MM 52-218 WR COMB 12PT LNG 18MM FP
12-938 HDL T 1/2DR 11 37-707 SKT 1/4DR HEX BIT 4MM 38-712 SKT 3/8DR HEX BIT 7MM 39-132 SKT 1/2DR 12PT 32MM 52-219 WR COMB 12PT LNG 19MM FP
12-947 UNV JNT 1/2DR 37-709 SKT 1/4DR HEX BIT 5MM 38-713 SKT 3/8DR HEX BIT 8MM 39-136 SKT 1/2DR 12PT 36MM 52-220 WR COMB 12PT LNG 20MM FP
12-972 RAT 1/2DR 10-1/2 REPL 12-903 37-711 SKT 1/4DR HEX BIT 6MM 38-714 SKT 3/8DR HEX BIT 9MM 39-310 SKT 1/2DR 12PT 10MM DP 52-221 WR COMB 12PT LNG 21MM FP
12-973 RAT 1/2DR 15 REPL 12-904 38-106 SKT 3/8DR 12PT 6MM 38-715 SKT 3/8DR HEX BIT 10MM 39-311 SKT 1/2DR 12PT 11MM DP 52-222 WR COMB 12PT LNG 22MM FP
12-974 RAT 1/2DR FLX 14-1/4 38-107 SKT 3/8DR 12PT 7MM 38-850 WR 3/8DR CRFT 10 MM 39-312 SKT 1/2DR 12PT 12MM DP 52-223 WR COMB 12PT LNG 23MM FP
28-406 WR ADJ 6 38-108 SKT 3/8DR 12PT 8MM 38-851 WR 3/8DR CRFT 11 MM 39-313 SKT 1/2DR 12PT 13MM DP 52-224 WR COMB 12PT LNG 24MM FP
28-408 WR ADJ 8 38-109 SKT 3/8DR 12PT 9MM 38-852 WR 3/8DR CRFT 12 MM 39-314 SKT 1/2DR 12PT 14MM DP 53-016 WR OE 6X7MM FP
28-410 WR ADJ 10 38-110 SKT 3/8DR 12PT 10MM 38-853 WR 3/8DR CRFT 13 MM 39-315 SKT 1/2DR 12PT 15MM DP 53-022 WR OE 8X9MM FP
28-412 WR ADJ 12 38-111 SKT 3/8DR 12PT 11MM 38-854 WR 3/8DR CRFT 14 MM 39-316 SKT 1/2DR 12PT 16MM DP 53-034 WR OE 10X11MM FP
3470 HOOK & PIN PULLER 38-112 SKT 3/8DR 12PT 12MM 38-855 WR 3/8DR CRFT 15 MM 39-317 SKT 1/2DR 12PT 17MM DP Continued . . .

A-15
 A
Master Set Contents
Set 44-012 355 Pc. Metric Master Set Cont.
53-052 WR OE 12X13MM FP 55-315 WR RAT FLR NUT 12PT 15MM 66-835 NUT DR 8MM HOLL SHFT 68-036 PLR RET RNG CONV .090 90D 70-305 CHSL CLD 3/8 TIP
53-067 WR OE 14X15MM FP 55-316 WR RAT FLR NUT 12PT 16MM 66-836 NUT DR 9MM HOLL SHFT 68-241 SNIPS MINI 6-1/2 70-309 CHSL CLD 1/2 TIP
53-082 WR OE 16X17MM FP 55-317 WR RAT FLR NUT 12PT 17MM 66-837 NUT DR 10MM HOLL SHFT 68-255 SNIPS AVN 10 STRT 70-311 CHSL CLD 5/8 TIP
53-096 WR OE 18X19MM FP 55-318 WR RAT FLR NUT 12PT 18MM 66-838 NUT DR 11MM HOLL SHFT 68-275 SNIPS STRT 12-3/4 70-313 CHSL CLD 3/4 TIP
53-115 WR OE 20X22MM FP 55-319 WR RAT FLR NUT 12PT 19MM 66-839 NUT DR 12MM HOLL SHFT 68-310 KNFE UTIL RETRACT 70-315 CHSL CLD 7/8 TIP
53-119 WR OE 21X23MM FP 56194 9 PC METRIC BALL PLUS SET 66-840 NUT DR 13MM HOLL SHFT 68-445 TP MEAS 1X25 LCK AUTO 70-317 CHSL CLD 1 TIP
53-142 WR OE 24X26MM FP 64-085 WR TRQ 1/2DR 10-150 FT/LB 66-924 SCR START SLT 5 69-444 HMR BLL PN 8OZ WD HDL 70-319 CHSL CLD 1-1/8 TIP
53-616 WR BX LNG 12PT 6X7MM 66-150 SCRDR PHLP #2X1-1/2 66-933 SCR START PHLP 5 69-448 HMR BLL PN 1LB WD HDL 70-503 ALIGNING BAR PINCH 5/8X16
53-622 WR BX LNG 12PT 8X9MM 66-152 SCRDR PHLP #0X2-1/2 67-067 PLR LNMN 8-1/2 W/GRP 69-452 HMR BLL PN 2LB WD HDL 70-505 ALIGNING BAR PINCH 3/4X24
53-634 WR BX LNG 12PT 10X11MM 66-153 SCRDR PHLP #1X3 67-109 PLR DIAG CUT 7 HD W/GRP 69-490 RBR MALL 32OZ 16-1/2 70-519 CHSL BAR ROLL1/2X15
53-652 WR BX LNG 12PT 12X13MM 66-155 SCRDR PHLP #1X6 67-161 PLR DIAG CUT 6-3/8 W/GRP 69-532 HMR DEAD BLOW STD 21OZ 70-521 CHSL BAR ROLL 5/8X18
53-667 WR BX LNG 12PT 14X15MM 66-156 SCRDR PHLP #2X4 67-305 PLR CHN NSE 6-1/3 SD CUT W/GRP 67-436 6" LOCKING PLIERS 70-793 SET FEELER GAUGE 25 BLADE
53-685 WR BX LNG 12PT 16X18MM 66-158 SCRDR PHLP #2X8 67-357 PLR NDL NSE 5-7/16 W/GRP 70-000 PUNCH & CHISEL HOLDER 70-865 HCKS FLT FRM
53-691 WR BX LNG 12PT 17X19MM 66-161 SCRDR PHLP #3X6 67-401 PLR NDL NSE 5-7/8 CURV W/GRP 70-103 PNCH PIN 3/32 TIP 70-929 TELESCP MIRROR 2-1/8 DIA
53-719 WR BX LNG 12PT 21X23MM 66-164 SCRDR PHLP #4X8 67-503 PLR DKBL 8 W/GRP 70-105 PNCH PIN 1/8 TIP 70-933 RETR TL MAG TELESCP
53-727 WR BX LNG 12PT 22X24MM 66-203 SCRDR SLT 3/16X4 SQ 67-535 PLR END CUT 7-3/8 W/GRP 70-107 PNCH PIN 5/32 TIP 70-943 RETR TL FLX 23-1/2
53-762 WR BX LNG 12PT 27X30MM 66-208 SCRDR SLT 1/4X4 SQ 67-667 PLR SLP JNT 6-1/2 W/GRP 70-109 PNCH PIN 3/16 TIP 70-950 SCR EXTR 1/8
53-775 WR BX LNG 12PT 30X32MM 66-217 SCRDR SLT 5/16X6 SQ 67-669 PLR SLP JNT 8 W/GRP 70-129 PNCH PIN 7/32 TIP 70-952 SCR EXTR 3/16
54-510 WR GEARED BOX 12PT 10MM FP 66-220 SCRDR SLT 3/8X8 SQ 67-717 PLR TNG&GRV 5 W/GRP 70-131 PNCH PIN 1/4 TIP 70-954 SCR EXTR 15/64
54-511 WR GEARED BOX 12PT 11MM FP 66-226 SCRDR SLT 7/16X12 SQ 67-777 PLR TNG&GRV 6 W/GRP 70-155 PNCH START 3/32 TIP 70-956 SCR EXTR 5/16
54-512 WR GEARED BOX 12PT 12MM FP 66-232 SCRDR SLT 1/4X1-1/2 SQ 67-779 PLR TNG&GRV 10 W/GRP 70-157 PNCH START 1/8 TIP 70-958 SCR EXTR 3/8
54-513 WR GEARED BOX 12PT 13MM FP 66-253 SCRDR CAB 1/8X3 67-901 PLR WIRE STRPR CRMP CUT 8-1/4 70-161 PNCH START 3/16 TIP 70-960 SCR EXTR 15/32
54-514 WR GEARED BOX 12PT 14MM FP 66-255 SCRDR CAB 1/8X4 68-025 PLR RET RNG CONV .038 0D 70-163 PNCH START 7/32 TIP 70-962 SCR EXTR 9/16
54-515 WR GEARED BOX 12PT 15MM FP 66-259 SCRDR CAB 1/8X8 68-026 PLR RET RNG CONV .038 45D 70-165 PNCH START 1/4 TIP 70-964 SCR EXTR 21/32
54-516 WR GEARED BOX 12PT 16MM FP 66-262 SCRDR CAB 3/16X4 68-027 PLR RET RNG CONV .038 90D 70-189 PNCH DRFT 1/8 TIP 70-966 SCR EXTR 13/16
54-517 WR GEARED BOX 12PT 17MM FP 66-268 SCRDR CAB 3/16X8 68-028 PLR RET RNG CONV .047 0D 70-193 PNCH DRFT 3/16 TIP 72-441 PULLER CONE 2/3 JAW
54-518 WR GEARED BOX 12PT 18MM FP 66-605 SCRDR OFF 5/16X5 68-029 PLR RET RNG CONV .047 45D 70-197 PNCH DRFT 1/4 TIP 73-008 WR PIPE 8 HD
54-519 WR GEARED BOX 12PT 19MM FP 66-609 SCRDR OFF #1X#2X4-1/2 68-030 PLR RET RNG CONV .047 90D 70-235 PNCH CNTR 3/8 73-010 WR PIPE 10 HD
55-310 WR RAT FLR NUT 12PT 10MM 66-829 NUT DR 4MM HOLL SHFT 68-031 PLR RET RNG CONV .070 0D 70-239 PNCH CNTR 1/2 73-014 WR PIPE 14 HD
55-311 WR RAT FLR NUT 12PT 11MM 66-831 NUT DR 5MM HOLL SHFT 68-032 PLR RET RNG CONV .070 45D 70-253 PNCH PRCK 5/16 78-404 C-CL THRT DP 4 STD SCREW

Master Set Contents

55-312 WR RAT FLR NUT 12PT 12MM 66-832 NUT DR 5.5MM HOLL SHFT 68-033 PLR RET RNG CONV .070 90D 70-255 PNCH PRCK 3/8 BLK (2)
55-313 WR RAT FLR NUT 12PT 13MM 66-833 NUT DR 6MM HOLL SHFT 68-034 PLR RET RNG CONV .090 0D 70-301 CHSL CLD 1/4 TIP 67-407 7" LOCKING PLIERS
55-314 WR RAT FLR NUT 12PT 14MM 66-834 NUT DR 7MM HOLL SHFT 68-035 PLR RET RNG CONV .090 45D 70-303 CHSL CLD 5/16 TIP

Set 44-017 229 Pc. Metric Intermediate Set - Tools Only

10-918 HDL FLX 1/4DR 5-3/4 37-214 SKT 1/4DR 6PT 14MM DP 39-122 SKT 1/2DR 12PT 22MM 53-119 WR OE 21X23MM FP 67-305 PLR CHN NSE 6-1/3 SD CUT
10-921 EXTEN 1/4DR 2 37-283 SKT 1/4DR 6PT 5.5MM DP 39-123 SKT 1/2DR 12PT 23MM 53-142 WR OE 24X26MM FP W/GRP
10-923 EXTEN 1/4DR 6 38-108 SKT 3/8DR 12PT 8MM 39-124 SKT 1/2DR 12PT 24MM 54-510 WR GEARED BOX 12PT 10MM FP 67-357 PLR NDL NSE 5-7/16 W/GRP
10-943 HDL SPIN 1/4DR 6 38-109 SKT 3/8DR 12PT 9MM 39-125 SKT 1/2DR 12PT 25MM 54-511 WR GEARED BOX 12PT 11MM FP 67-401 PLR NDL NSE 5-7/8 CURV
10-947 UNV JNT 1/4DR 38-110 SKT 3/8DR 12PT 10MM 39-126 SKT 1/2DR 12PT 26MM 54-512 WR GEARED BOX 12PT 12MM FP W/GRP
10-972 RAT 1/4DR 5-9/32 REPL 10-903 38-111 SKT 3/8DR 12PT 11MM 39-316 SKT 1/2DR 12PT 16MM DP 54-513 WR GEARED BOX 12PT 13MM FP 67-503 PLR DKBL 8 W/GRP
67-410 10" LOCKING PLIER 38-112 SKT 3/8DR 12PT 12MM 39-317 SKT 1/2DR 12PT 17MM DP 54-514 WR GEARED BOX 12PT 14MM FP 67-535 PLR END CUT 7-3/8 W/GRP
11-918 HDL FLX 3/8DR 8-1/2 38-113 SKT 3/8DR 12PT 13MM 39-318 SKT 1/2DR 12PT 18MM DP 54-515 WR GEARED BOX 12PT 15MM FP 67-669 PLR SLP JNT 8 W/GRP
11-922 EXTEN 3/8DR 3 38-114 SKT 3/8DR 12PT 14MM 39-319 SKT 1/2DR 12PT 19MM DP 54-516 WR GEARED BOX 12PT 16MM FP 67-779 PLR TNG&GRV 10 W/GRP
11-923 EXTEN 3/8DR 6 38-115 SKT 3/8DR 12PT 15MM 39-320 SKT 1/2DR 12PT 20MM DP 54-517 WR GEARED BOX 12PT 17MM FP 67-901 PLR WIRE STRPR CRMP CUT 8-1/4
11-935 HDL SPD 3/8DR 16-1/2 38-116 SKT 3/8DR 12PT 16MM 39-321 SKT 1/2DR 12PT 21MM DP 54-518 WR GEARED BOX 12PT 18MM FP 68-065 SET RET RNG PLR LIGHT DUTY
11-947 UNV JNT 3/8DR 38-117 SKT 3/8DR 12PT 17MM 39-322 SKT 1/2DR 12PT 22MM DP 54-519 WR GEARED BOX 12PT 19MM FP 68-241 SNIPS MINI 6-1/2
11-972 RAT 3/8DR 7-3/8 REPL 11-903 38-118 SKT 3/8DR 12PT 18MM 39-324 SKT 1/2DR 12PT 24MM DP 55-310 WR RAT FLR NUT 12PT 10MM 68-255 SNIPS AVN 10 STRT
12-918 HDL FLX 1/2DR 17 38-119 SKT 3/8DR 12PT 19MM 39-325 SKT 1/2DR 12PT 25MM DP 55-311 WR RAT FLR NUT 12PT 11MM 68-310 KNFE UTIL RETRACT
12-921 EXTEN 1/2DR 2-1/2 38-308 SKT 3/8DR 12PT 8MM DP 39-326 SKT 1/2DR 12PT 26MM DP 55-312 WR RAT FLR NUT 12PT 12MM 68-445 TP MEAS 1X25 LCK AUTO
12-923 EXTEN 1/2DR 5 38-309 SKT 3/8DR 12PT 9MM DP 39-717 SKT 1/2DR HEX BIT 12MM 55-313 WR RAT FLR NUT 12PT 13MM 69-448 HMR BLL PN 1LB WD HDL
12-924 EXTEN 1/2DR 10 38-310 SKT 3/8DR 12PT 10MM DP 39-719 SKT 1/2DR HEX BIT 14MM 55-314 WR RAT FLR NUT 12PT 14MM 69-452 HMR BLL PN 2LB WD HDL
12-935 HDL SPD 1/2DR 19 38-311 SKT 3/8DR 12PT 11MM DP 39-722 SKT 1/2DR HEX BIT 17MM 55-315 WR RAT FLR NUT 12PT 15MM 69-532 HMR DEAD BLOW STD 21OZ
12-947 UNV JNT 1/2DR 38-312 SKT 3/8DR 12PT 12MM DP 485 GASKET SCRAPER 55-316 WR RAT FLR NUT 12PT 16MM 70-000 PUNCH & CHISEL HOLDER
12-972 RAT 1/2DR 10-1/2 REPL 12-903 38-313 SKT 3/8DR 12PT 13MM DP 52-207 WR COMB 12PT LNG 7MM FP 55-317 WR RAT FLR NUT 12PT 17MM 70-103 PNCH PIN 3/32 TIP
28-406 WR ADJ 6 38-314 SKT 3/8DR 12PT 14MM DP 52-208 WR COMB 12PT LNG 8MM FP 55-318 WR RAT FLR NUT 12PT 18MM 70-105 PNCH PIN 1/8 TIP
28-408 WR ADJ 8 38-315 SKT 3/8DR 12PT 15MM DP 52-209 WR COMB 12PT LNG 9MM FP 55-319 WR RAT FLR NUT 12PT 19MM 70-109 PNCH PIN 3/16 TIP
28-410 WR ADJ 10 38-316 SKT 3/8DR 12PT 16MM DP 52-210 WR COMB 12PT LNG 10MM FP 56194 9 PC METRIC BALL PLUS SET 70-153 PNCH START 1/16 TIP
37-004 SKT 1/4DR 6PT 4MM 38-317 SKT 3/8DR 12PT 17MM DP 52-211 WR COMB 12PT LNG 11MM FP 66-150 SCRDR PHLP #2X1-1/2 70-157 PNCH START 1/8 TIP
37-005 SKT 1/4DR 6PT 5MM 38-318 SKT 3/8DR 12PT 18MM DP 52-212 WR COMB 12PT LNG 12MM FP 66-152 SCRDR PHLP #0X2-1/2 70-161 PNCH START 3/16 TIP
37-006 SKT 1/4DR 6PT 6MM 38-319 SKT 3/8DR 12PT 19MM DP 52-213 WR COMB 12PT LNG 13MM FP 66-153 SCRDR PHLP #1X3 70-235 PNCH CNTR 3/8
37-007 SKT 1/4DR 6PT 7MM 38-707 SKT 3/8DR HEX BIT 4MM 52-214 WR COMB 12PT LNG 14MM FP 66-156 SCRDR PHLP #2X4 70-303 CHSL CLD 5/16 TIP
37-008 SKT 1/4DR 6PT 8MM 38-709 SKT 3/8DR HEX BIT 5MM 52-215 WR COMB 12PT LNG 15MM FP 66-161 SCRDR PHLP #3X6 70-307 CHSL CLD 7/16 TIP
37-009 SKT 1/4DR 6PT 9MM 38-711 SKT 3/8DR HEX BIT 6MM 52-216 WR COMB 12PT LNG 16MM FP 66-164 SCRDR PHLP #4X8 70-309 CHSL CLD 1/2 TIP
37-010 SKT 1/4DR 6PT 10MM 38-712 SKT 3/8DR HEX BIT 7MM 52-217 WR COMB 12PT LNG 17MM FP 66-203 SCRDR SLT 3/16X4 SQ 70-393 CHSL CAPE 7/32 TIP
37-011 SKT 1/4DR 6PT 11MM 38-713 SKT 3/8DR HEX BIT 8MM 52-218 WR COMB 12PT LNG 18MM FP 66-208 SCRDR SLT 1/4X4 SQ 70-421 CHSL DIA PT 3/16 TIP
37-012 SKT 1/4DR 6PT 12MM 38-714 SKT 3/8DR HEX BIT 9MM 52-219 WR COMB 12PT LNG 19MM FP 66-217 SCRDR SLT 5/16X6 SQ 70-503 ALIGNING BAR PINCH 5/8X16
37-013 SKT 1/4DR 6PT 13MM 38-715 SKT 3/8DR HEX BIT 10MM 52-220 WR COMB 12PT LNG 20MM FP 66-220 SCRDR SLT 3/8X8 SQ 70-519 CHSL BAR ROLL1/2X15
37-014 SKT 1/4DR 6PT 14MM 39-110 SKT 1/2DR 12PT 10MM 52-221 WR COMB 12PT LNG 21MM FP 66-226 SCRDR SLT 7/16X12 SQ 70-865 HCKS FLT FRM
37-083 SKT 1/4DR 6PT 5.5MM 39-111 SKT 1/2DR 12PT 11MM 52-222 WR COMB 12PT LNG 22MM FP 66-232 SCRDR SLT 1/4X1-1/2 SQ 70-950 SCR EXTR 1/8
37-204 SKT 1/4DR 6PT 4MM DP 39-112 SKT 1/2DR 12PT 12MM 52-223 WR COMB 12PT LNG 23MM FP 66-831 NUT DR 5MM HOLL SHFT 70-952 SCR EXTR 3/16
37-205 SKT 1/4DR 6PT 5MM DP 39-113 SKT 1/2DR 12PT 13MM 52-224 WR COMB 12PT LNG 24MM FP 66-832 NUT DR 5.5MM HOLL SHFT 70-954 SCR EXTR 15/64
37-206 SKT 1/4DR 6PT 6MM DP 39-114 SKT 1/2DR 12PT 14MM 53-016 WR OE 6X7MM FP 66-833 NUT DR 6MM HOLL SHFT 70-956 SCR EXTR 5/16
37-207 SKT 1/4DR 6PT 7MM DP 39-115 SKT 1/2DR 12PT 15MM 53-022 WR OE 8X9MM FP 66-834 NUT DR 7MM HOLL SHFT 70-958 SCR EXTR 3/8
37-208 SKT 1/4DR 6PT 8MM DP 39-116 SKT 1/2DR 12PT 16MM 53-034 WR OE 10X11MM FP 66-835 NUT DR 8MM HOLL SHFT 73-010 WR PIPE 10 HD
37-209 SKT 1/4DR 6PT 9MM DP 39-117 SKT 1/2DR 12PT 17MM 53-052 WR OE 12X13MM FP 66-836 NUT DR 9MM HOLL SHFT 78-404 C-CL THRT DP 4 STD SCR BLK
37-210 SKT 1/4DR 6PT 10MM DP 39-118 SKT 1/2DR 12PT 18MM 53-067 WR OE 14X15MM FP 66-837 NUT DR 10MM HOLL SHFT 67-407 7" LOCKING PLIERS
37-211 SKT 1/4DR 6PT 11MM DP 39-119 SKT 1/2DR 12PT 19MM 53-082 WR OE 16X17MM FP 67-067 PLR LNMN 8-1/2 W/GRP
37-212 SKT 1/4DR 6PT 12MM DP 39-120 SKT 1/2DR 12PT 20MM 53-096 WR OE 18X19MM FP 67-109 PLR DIAG CUT 7 HD W/GRP
37-213 SKT 1/4DR 6PT 13MM DP 39-121 SKT 1/2DR 12PT 21MM 53-115 WR OE 20X22MM FP 67-161 PLR DIAG CUT 6-3/8 W/GRP

A-16
 A
Master Set Contents
Set 44-022 138 Pc. Metric Basic Set - Tools Only
10-921 EXTEN 1/4DR 2 37-011 SKT 1/4DR 6PT 11MM 38-315 SKT 3/8DR 12PT 15MM DP 52-210 WR COMB 12PT LNG 10MM FP 67-901 PLR WIRE STRPR CRMP CUT 8-1/4
10-923 EXTEN 1/4DR 6 37-012 SKT 1/4DR 6PT 12MM 38-316 SKT 3/8DR 12PT 16MM DP 52-211 WR COMB 12PT LNG 11MM FP 68-065 SET RET RNG PLR LIGHT DUTY
10-943 HDL SPIN 1/4DR 6 37-013 SKT 1/4DR 6PT 13MM 38-317 SKT 3/8DR 12PT 17MM DP 52-212 WR COMB 12PT LNG 12MM FP 68-255 SNIPS AVN 10 STRT
10-947 UNV JNT 1/4DR 37-014 SKT 1/4DR 6PT 14MM 38-318 SKT 3/8DR 12PT 18MM DP 52-213 WR COMB 12PT LNG 13MM FP 68-310 KNFE UTIL RETRACT
10-972 RAT 1/4DR 5-9/32 REPL 10-903 37-083 SKT 1/4DR 6PT 5.5MM 38-319 SKT 3/8DR 12PT 19MM DP 52-214 WR COMB 12PT LNG 14MM FP 69-448 HMR BLL PN 1LB WD HDL
67-410 10" LOCKING PLIERS 38-106 SKT 3/8DR 12PT 6MM 39-110 SKT 1/2DR 12PT 10MM 52-215 WR COMB 12PT LNG 15MM FP 69-532 HMR DEAD BLOW STD 21OZ
11-918 HDL FLX 3/8DR 8-1/2 38-107 SKT 3/8DR 12PT 7MM 39-111 SKT 1/2DR 12PT 11MM 52-216 WR COMB 12PT LNG 16MM FP 70-000 PUNCH & CHISEL HOLDER
11-922 EXTEN 3/8DR 3 38-108 SKT 3/8DR 12PT 8MM 39-112 SKT 1/2DR 12PT 12MM 52-217 WR COMB 12PT LNG 17MM FP 70-103 PNCH PIN 3/32 TIP
11-927 EXTEN 3/8DR 12 38-109 SKT 3/8DR 12PT 9MM 39-113 SKT 1/2DR 12PT 13MM 52-218 WR COMB 12PT LNG 18MM FP 70-105 PNCH PIN 1/8 TIP
11-935 HDL SPD 3/8DR 16-1/2 38-110 SKT 3/8DR 12PT 10MM 39-114 SKT 1/2DR 12PT 14MM 52-219 WR COMB 12PT LNG 19MM FP 70-109 PNCH PIN 3/16 TIP
11-947 UNV JNT 3/8DR 38-111 SKT 3/8DR 12PT 11MM 39-115 SKT 1/2DR 12PT 15MM 52-220 WR COMB 12PT LNG 20MM FP 70-153 PNCH START 1/16 TIP
11-972 RAT 3/8DR 7-3/8 REPL 11-903 38-112 SKT 3/8DR 12PT 12MM 39-116 SKT 1/2DR 12PT 16MM 52-221 WR COMB 12PT LNG 21MM FP 70-157 PNCH START 1/8 TIP
12-918 HDL FLX 1/2DR 17 38-113 SKT 3/8DR 12PT 13MM 39-117 SKT 1/2DR 12PT 17MM 56194 9 PC METRIC BALL PLUS SET 70-161 PNCH START 3/16 TIP
12-923 EXTEN 1/2DR 5 38-114 SKT 3/8DR 12PT 14MM 39-118 SKT 1/2DR 12PT 18MM 66-102 SCRDR SLT 1/4X4 70-235 PNCH CNTR 3/8
12-924 EXTEN 1/2DR 10 38-115 SKT 3/8DR 12PT 15MM 39-119 SKT 1/2DR 12PT 19MM 66-103 SCRDR SLT 5/16X6 70-303 CHSL CLD 5/16 TIP
12-947 UNV JNT 1/2DR 38-116 SKT 3/8DR 12PT 16MM 39-120 SKT 1/2DR 12PT 20MM 66-153 SCRDR PHLP #1X3 70-307 CHSL CLD 7/16 TIP
12-972 RAT 1/2DR 10-1/2 REPL 12-903 38-117 SKT 3/8DR 12PT 17MM 39-121 SKT 1/2DR 12PT 21MM 66-156 SCRDR PHLP #2X4 70-309 CHSL CLD 1/2 TIP
28-406 WR ADJ 6 38-118 SKT 3/8DR 12PT 18MM 39-122 SKT 1/2DR 12PT 22MM 66-161 SCRDR PHLP #3X6 70-393 CHSL CAPE 7/32 TIP
28-410 WR ADJ 10 38-119 SKT 3/8DR 12PT 19MM 39-123 SKT 1/2DR 12PT 23MM 66-261 SCRDR CAB 3/16X3 70-421 CHSL DIA PT 3/16 TIP
37-004 SKT 1/4DR 6PT 4MM 38-308 SKT 3/8DR 12PT 8MM DP 39-124 SKT 1/2DR 12PT 24MM 66-262 SCRDR CAB 3/16X4 70-865 HCKS FLT FRM
37-005 SKT 1/4DR 6PT 5MM 38-309 SKT 3/8DR 12PT 9MM DP 39-125 SKT 1/2DR 12PT 25MM 66-265 SCRDR CAB 3/16X5 70-950 SCR EXTR 1/8
37-006 SKT 1/4DR 6PT 6MM 38-310 SKT 3/8DR 12PT 10MM DP 39-126 SKT 1/2DR 12PT 26MM 67-067 PLR LNMN 8-1/2 W/GRP 70-952 SCR EXTR 3/16
37-007 SKT 1/4DR 6PT 7MM 38-311 SKT 3/8DR 12PT 11MM DP 485 GASKET SCRAPER 67-109 PLR DIAG CUT 7 HD W/GRP 70-954 SCR EXTR 15/64
37-008 SKT 1/4DR 6PT 8MM 38-312 SKT 3/8DR 12PT 12MM DP 52-207 WR COMB 12PT LNG 7MM FP 67-305 PLR CHN NSE 6-1/3 SD CUT W/GRP 70-956 SCR EXTR 5/16
37-009 SKT 1/4DR 6PT 9MM 38-313 SKT 3/8DR 12PT 13MM DP 52-208 WR COMB 12PT LNG 8MM FP 67-669 PLR SLP JNT 8 W/GRP 70-958 SCR EXTR 3/8
37-010 SKT 1/4DR 6PT 10MM 38-314 SKT 3/8DR 12PT 14MM DP 52-209 WR COMB 12PT LNG 9MM FP 67-779 PLR TNG&GRV 10 W/GRP 67-407 7" LOCKING PLIERS
Master Set Contents

Set 44-027 158 Pc. Metric Intermediate Set - Tools Only

67-410 10" LOCKING PLIERS 38-310 SKT 3/8DR 12PT 10MM DP 39-123 SKT 1/2DR 12PT 23MM 52-218 WR COMB 12PT LNG 18MM FP 67-535 PLR END CUT 7-3/8 W/GRP
11-918 HDL FLX 3/8DR 8-1/2 38-311 SKT 3/8DR 12PT 11MM DP 39-124 SKT 1/2DR 12PT 24MM 52-219 WR COMB 12PT LNG 19MM FP 67-669 PLR SLP JNT 8 W/GRP
11-922 EXTEN 3/8DR 3 38-312 SKT 3/8DR 12PT 12MM DP 39-125 SKT 1/2DR 12PT 25MM 52-220 WR COMB 12PT LNG 20MM FP 67-779 PLR TNG&GRV 10 W/GRP
11-923 EXTEN 3/8DR 6 38-313 SKT 3/8DR 12PT 13MM DP 39-126 SKT 1/2DR 12PT 26MM 52-221 WR COMB 12PT LNG 21MM FP 67-901 PLR WIRE STRPR CRMP CUT 8-1/4
11-947 UNV JNT 3/8DR 38-314 SKT 3/8DR 12PT 14MM DP 39-316 SKT 1/2DR 12PT 16MM DP 52-222 WR COMB 12PT LNG 22MM FP 68-065 SET RET RNG PLR LIGHT DUTY
11-972 RAT 3/8DR 7-3/8 REPL 11-903 38-315 SKT 3/8DR 12PT 15MM DP 39-317 SKT 1/2DR 12PT 17MM DP 52-223 WR COMB 12PT LNG 23MM FP 68-255 SNIPS AVN 10 STRT
12-918 HDL FLX 1/2DR 17 38-316 SKT 3/8DR 12PT 16MM DP 39-318 SKT 1/2DR 12PT 18MM DP 52-224 WR COMB 12PT LNG 24MM FP 69-448 HMR BLL PN 1LB WD HDL
12-921 EXTEN 1/2DR 2-1/2 38-317 SKT 3/8DR 12PT 17MM DP 39-319 SKT 1/2DR 12PT 19MM DP 53-022 WR OE 8X9MM FP 69-532 HMR DEAD BLOW STD 21OZ
12-923 EXTEN 1/2DR 5 38-318 SKT 3/8DR 12PT 18MM DP 39-320 SKT 1/2DR 12PT 20MM DP 53-034 WR OE 10X11MM FP 70-000 PUNCH & CHISEL HOLDER
12-924 EXTEN 1/2DR 10 38-319 SKT 3/8DR 12PT 19MM DP 39-321 SKT 1/2DR 12PT 21MM DP 53-052 WR OE 12X13MM FP 70-103 PNCH PIN 3/32 TIP
12-935 HDL SPD 1/2DR 19 38-707 SKT 3/8DR HEX BIT 4MM 39-322 SKT 1/2DR 12PT 22MM DP 53-067 WR OE 14X15MM FP 70-105 PNCH PIN 1/8 TIP
12-947 UNV JNT 1/2DR 38-709 SKT 3/8DR HEX BIT 5MM 39-323 SKT 1/2DR 12PT 23MM DP 53-082 WR OE 16X17MM FP 70-109 PNCH PIN 3/16 TIP
12-972 RAT 1/2DR 10-1/2 REPL 12-903 38-711 SKT 3/8DR HEX BIT 6MM 39-324 SKT 1/2DR 12PT 24MM DP 53-096 WR OE 18X19MM FP 70-153 PNCH START 1/16 TIP
28-406 WR ADJ 6 38-712 SKT 3/8DR HEX BIT 7MM 39-325 SKT 1/2DR 12PT 25MM DP 56194 9 PC METRIC BALL PLUS SET 70-157 PNCH START 1/8 TIP
28-410 WR ADJ 10 38-713 SKT 3/8DR HEX BIT 8MM 39-326 SKT 1/2DR 12PT 26MM DP 66-150 SCRDR PHLP #2X1-1/2 70-161 PNCH START 3/16 TIP
28-412 WR ADJ 12 38-714 SKT 3/8DR HEX BIT 9MM 39-717 SKT 1/2DR HEX BIT 12MM 66-152 SCRDR PHLP #0X2-1/2 70-235 PNCH CNTR 3/8
38-108 SKT 3/8DR 12PT 8MM 38-715 SKT 3/8DR HEX BIT 10MM 39-719 SKT 1/2DR HEX BIT 14MM 66-153 SCRDR PHLP #1X3 70-303 CHSL CLD 5/16 TIP
38-109 SKT 3/8DR 12PT 9MM 39-110 SKT 1/2DR 12PT 10MM 39-722 SKT 1/2DR HEX BIT 17MM 66-156 SCRDR PHLP #2X4 70-307 CHSL CLD 7/16 TIP
38-110 SKT 3/8DR 12PT 10MM 39-111 SKT 1/2DR 12PT 11MM 485 GASKET SCRAPER 66-161 SCRDR PHLP #3X6 70-309 CHSL CLD 1/2 TIP
38-111 SKT 3/8DR 12PT 11MM 39-112 SKT 1/2DR 12PT 12MM 52-207 WR COMB 12PT LNG 7MM FP 66-164 SCRDR PHLP #4X8 70-393 CHSL CAPE 7/32 TIP
38-112 SKT 3/8DR 12PT 12MM 39-113 SKT 1/2DR 12PT 13MM 52-208 WR COMB 12PT LNG 8MM FP 66-203 SCRDR SLT 3/16X4 SQ 70-421 CHSL DIA PT 3/16 TIP
38-113 SKT 3/8DR 12PT 13MM 39-114 SKT 1/2DR 12PT 14MM 52-209 WR COMB 12PT LNG 9MM FP 66-208 SCRDR SLT 1/4X4 SQ 70-503 ALIGNING BAR PINCH 5/8X16
38-114 SKT 3/8DR 12PT 14MM 39-115 SKT 1/2DR 12PT 15MM 52-210 WR COMB 12PT LNG 10MM FP 66-217 SCRDR SLT 5/16X6 SQ 70-519 CHSL BAR ROLL1/2X15
38-115 SKT 3/8DR 12PT 15MM 39-116 SKT 1/2DR 12PT 16MM 52-211 WR COMB 12PT LNG 11MM FP 66-220 SCRDR SLT 3/8X8 SQ 70-865 HCKS FLT FRM
38-116 SKT 3/8DR 12PT 16MM 39-117 SKT 1/2DR 12PT 17MM 52-212 WR COMB 12PT LNG 12MM FP 66-226 SCRDR SLT 7/16X12 SQ 70-950 SCR EXTR 1/8
38-117 SKT 3/8DR 12PT 17MM 39-118 SKT 1/2DR 12PT 18MM 52-213 WR COMB 12PT LNG 13MM FP 66-232 SCRDR SLT 1/4X1-1/2 SQ 70-952 SCR EXTR 3/16
38-118 SKT 3/8DR 12PT 18MM 39-119 SKT 1/2DR 12PT 19MM 52-214 WR COMB 12PT LNG 14MM FP 67-067 PLR LNMN 8-1/2 W/GRP 70-954 SCR EXTR 15/64
38-119 SKT 3/8DR 12PT 19MM 39-120 SKT 1/2DR 12PT 20MM 52-215 WR COMB 12PT LNG 15MM FP 67-109 PLR DIAG CUT 7 HD W/GRP 70-956 SCR EXTR 5/16
38-308 SKT 3/8DR 12PT 8MM DP 39-121 SKT 1/2DR 12PT 21MM 52-216 WR COMB 12PT LNG 16MM FP 67-161 PLR DIAG CUT 6-3/8 W/GRP 70-958 SCR EXTR 3/8
38-309 SKT 3/8DR 12PT 9MM DP 39-122 SKT 1/2DR 12PT 22MM 52-217 WR COMB 12PT LNG 17MM FP 67-305 PLR CHN NSE 6-1/3 SD CUT W/GRP 67-407 7" LOCKING PLIERS

Set 44-031 99 Pc. Metric Basic Set - Tools Only

11-918 HDL FLX 3/8DR 8-1/2 38-112 SKT 3/8DR 12PT 12MM 39-121 SKT 1/2DR 12PT 21MM 52-219 WR COMB 12PT LNG 19MM FP 70-000 PUNCH & CHISEL HOLDER
11-922 EXTEN 3/8DR 3 38-113 SKT 3/8DR 12PT 13MM 39-122 SKT 1/2DR 12PT 22MM 52-220 WR COMB 12PT LNG 20MM FP 70-103 PNCH PIN 3/32 TIP
11-927 EXTEN 3/8DR 12 38-114 SKT 3/8DR 12PT 14MM 39-123 SKT 1/2DR 12PT 23MM 52-221 WR COMB 12PT LNG 21MM FP 70-105 PNCH PIN 1/8 TIP
11-935 HDL SPD 3/8DR 16-1/2 38-115 SKT 3/8DR 12PT 15MM 39-124 SKT 1/2DR 12PT 24MM 56194 9 PC METRIC BALL PLUS SET 70-109 PNCH PIN 3/16 TIP
11-947 UNV JNT 3/8DR 38-116 SKT 3/8DR 12PT 16MM 39-125 SKT 1/2DR 12PT 25MM 66-102 SCRDR SLT 1/4X4 70-153 PNCH START 1/16 TIP
11-972 RAT 3/8DR 7-3/8 REPL 11-903 38-117 SKT 3/8DR 12PT 17MM 39-126 SKT 1/2DR 12PT 26MM 66-103 SCRDR SLT 5/16X6 70-157 PNCH START 1/8 TIP
12-918 HDL FLX 1/2DR 17 38-118 SKT 3/8DR 12PT 18MM 485 GASKET SCRAPER 66-153 SCRDR PHLP #1X3 70-161 PNCH START 3/16 TIP
12-923 EXTEN 1/2DR 5 38-119 SKT 3/8DR 12PT 19MM 52-207 WR COMB 12PT LNG 7MM FP 66-156 SCRDR PHLP #2X4 70-235 PNCH CNTR 3/8
12-924 EXTEN 1/2DR 10 39-110 SKT 1/2DR 12PT 10MM 52-208 WR COMB 12PT LNG 8MM FP 66-161 SCRDR PHLP #3X6 70-303 CHSL CLD 5/16 TIP
12-947 UNV JNT 1/2DR 39-111 SKT 1/2DR 12PT 11MM 52-209 WR COMB 12PT LNG 9MM FP 66-261 SCRDR CAB 3/16X3 70-307 CHSL CLD 7/16 TIP
12-972 RAT 1/2DR 10-1/2 REPL 12-903 39-112 SKT 1/2DR 12PT 12MM 52-210 WR COMB 12PT LNG 10MM FP 66-262 SCRDR CAB 3/16X4 70-309 CHSL CLD 1/2 TIP
28-406 WR ADJ 6 39-113 SKT 1/2DR 12PT 13MM 52-211 WR COMB 12PT LNG 11MM FP 66-265 SCRDR CAB 3/16X5 70-393 CHSL CAPE 7/32 TIP
28-410 WR ADJ 10 39-114 SKT 1/2DR 12PT 14MM 52-212 WR COMB 12PT LNG 12MM FP 67-109 PLR DIAG CUT 7 HD W/GRP 70-421 CHSL DIA PT 3/16 TIP
38-106 SKT 3/8DR 12PT 6MM 39-115 SKT 1/2DR 12PT 15MM 52-213 WR COMB 12PT LNG 13MM FP 67-305 PLR CHN NSE 6-1/3 SD CUT W/GRP 70-865 HCKS FLT FRM
38-107 SKT 3/8DR 12PT 7MM 39-116 SKT 1/2DR 12PT 16MM 52-214 WR COMB 12PT LNG 14MM FP 67-669 PLR SLP JNT 8 W/GRP 67-407 7" LOCKING PLIERS
38-108 SKT 3/8DR 12PT 8MM 39-117 SKT 1/2DR 12PT 17MM 52-215 WR COMB 12PT LNG 15MM FP 67-779 PLR TNG&GRV 10 W/GRP
38-109 SKT 3/8DR 12PT 9MM 39-118 SKT 1/2DR 12PT 18MM 52-216 WR COMB 12PT LNG 16MM FP 68-255 SNIPS AVN 10 STRT
38-110 SKT 3/8DR 12PT 10MM 39-119 SKT 1/2DR 12PT 19MM 52-217 WR COMB 12PT LNG 17MM FP 69-448 HMR BLL PN 1LB WD HDL
38-111 SKT 3/8DR 12PT 11MM 39-120 SKT 1/2DR 12PT 20MM 52-218 WR COMB 12PT LNG 18MM FP 69-532 HMR DEAD BLOW STD 21OZ

A-17
 A
Master Set Contents
Set 44-036 77 Pc. Metric Basic Set - Tools Only
12-918 HDL FLX 1/2DR 17 39-119 SKT 1/2DR 12PT 19MM 39-324 SKT 1/2DR 12PT 24MM DP 52-219 WR COMB 12PT LNG 19MM FP 69-448 HMR BLL PN 1LB WD HDL
12-923 EXTEN 1/2DR 5 39-120 SKT 1/2DR 12PT 20MM 39-325 SKT 1/2DR 12PT 25MM DP 52-220 WR COMB 12PT LNG 20MM FP 69-532 HMR DEAD BLOW STD 21OZ
12-924 EXTEN 1/2DR 10 39-121 SKT 1/2DR 12PT 21MM 39-326 SKT 1/2DR 12PT 26MM DP 52-221 WR COMB 12PT LNG 21MM FP 70-105 PNCH PIN 1/8 TIP
12-972 RAT 1/2DR 10-1/2 REPL 12-903 39-122 SKT 1/2DR 12PT 22MM 52-207 WR COMB 12PT LNG 7MM FP 56070 7 PC FOLD UP 70-109 PNCH PIN 3/16 TIP
28-408 WR ADJ 8 39-123 SKT 1/2DR 12PT 23MM 52-208 WR COMB 12PT LNG 8MM FP 66-153 SCRDR PHLP #1X3 70-197 PNCH DRFT 1/4 TIP
28-412 WR ADJ 12 39-124 SKT 1/2DR 12PT 24MM 52-209 WR COMB 12PT LNG 9MM FP 66-156 SCRDR PHLP #2X4 70-235 PNCH CNTR 3/8
39-110 SKT 1/2DR 12PT 10MM 39-125 SKT 1/2DR 12PT 25MM 52-210 WR COMB 12PT LNG 10MM FP 66-161 SCRDR PHLP #3X6 70-239 PNCH CNTR 1/2
39-111 SKT 1/2DR 12PT 11MM 39-126 SKT 1/2DR 12PT 26MM 52-211 WR COMB 12PT LNG 11MM FP 66-208 SCRDR SLT 1/4X4 SQ 70-305 CHSL CLD 3/8 TIP
39-112 SKT 1/2DR 12PT 12MM 39-316 SKT 1/2DR 12PT 16MM DP 52-212 WR COMB 12PT LNG 12MM FP 66-217 SCRDR SLT 5/16X6 SQ 70-309 CHSL CLD 1/2 TIP
39-113 SKT 1/2DR 12PT 13MM 39-317 SKT 1/2DR 12PT 17MM DP 52-213 WR COMB 12PT LNG 13MM FP 66-220 SCRDR SLT 3/8X8 SQ 70-313 CHSL CLD 3/4 TIP
39-114 SKT 1/2DR 12PT 14MM 39-318 SKT 1/2DR 12PT 18MM DP 52-214 WR COMB 12PT LNG 14MM FP 66-232 SCRDR SLT 1/4X1-1/2 SQ 67-407 7" LOCKING PLIERS
39-115 SKT 1/2DR 12PT 15MM 39-319 SKT 1/2DR 12PT 19MM DP 52-215 WR COMB 12PT LNG 15MM FP 67-109 PLR DIAG CUT 7 HD W/GRP
39-116 SKT 1/2DR 12PT 16MM 39-320 SKT 1/2DR 12PT 20MM DP 52-216 WR COMB 12PT LNG 16MM FP 67-305 PLR CHN NSE 6-1/3 SD CUT W/GRP
39-117 SKT 1/2DR 12PT 17MM 39-321 SKT 1/2DR 12PT 21MM DP 52-217 WR COMB 12PT LNG 17MM FP 67-669 PLR SLP JNT 8 W/GRP
39-118 SKT 1/2DR 12PT 18MM 39-322 SKT 1/2DR 12PT 22MM DP 52-218 WR COMB 12PT LNG 18MM FP 67-779 PLR TNG&GRV 10 W/GRP

Set 44-041 67 Pc. Metric Basic Set - Tools Only

11-918 HDL FLX 3/8DR 8-1/2 38-114 SKT 3/8DR 12PT 14MM 38-315 SKT 3/8DR 12PT 15MM DP 52-215 WR COMB 12PT LNG 15MM FP 69-530 HMR DEAD BLOW STD 10OZ
11-922 EXTEN 3/8DR 3 38-115 SKT 3/8DR 12PT 15MM 38-316 SKT 3/8DR 12PT 16MM DP 56070 7 PC FOLD UP 70-105 PNCH PIN 1/8 TIP
11-923 EXTEN 3/8DR 6 38-116 SKT 3/8DR 12PT 16MM 38-317 SKT 3/8DR 12PT 17MM DP 66-153 SCRDR PHLP #1X3 70-109 PNCH PIN 3/16 TIP
11-947 UNV JNT 3/8DR 38-117 SKT 3/8DR 12PT 17MM 38-318 SKT 3/8DR 12PT 18MM DP 66-156 SCRDR PHLP #2X4 70-193 PNCH DRFT 3/16 TIP
11-972 RAT 3/8DR 7-3/8 REPL 11-903 38-118 SKT 3/8DR 12PT 18MM 38-319 SKT 3/8DR 12PT 19MM DP 66-208 SCRDR SLT 1/4X4 SQ 70-235 PNCH CNTR 3/8
28-406 WR ADJ 6 38-119 SKT 3/8DR 12PT 19MM 52-207 WR COMB 12PT LNG 7MM FP 66-217 SCRDR SLT 5/16X6 SQ 70-239 PNCH CNTR 1/2
28-410 WR ADJ 10 38-308 SKT 3/8DR 12PT 8MM DP 52-208 WR COMB 12PT LNG 8MM FP 66-220 SCRDR SLT 3/8X8 SQ 70-305 CHSL CLD 3/8 TIP
38-108 SKT 3/8DR 12PT 8MM 38-309 SKT 3/8DR 12PT 9MM DP 52-209 WR COMB 12PT LNG 9MM FP 67-109 PLR DIAG CUT 7 HD W/GRP 70-309 CHSL CLD 1/2 TIP

Master Set Contents

38-109 SKT 3/8DR 12PT 9MM 38-310 SKT 3/8DR 12PT 10MM DP 52-210 WR COMB 12PT LNG 10MM FP 67-305 PLR CHN NSE 6-1/3 SD CUT 70-313 CHSL CLD 3/4 TIP
38-110 SKT 3/8DR 12PT 10MM 38-311 SKT 3/8DR 12PT 11MM DP 52-211 WR COMB 12PT LNG 11MM FP W/GRP 67-407 7" LOCKING PLIERS
38-111 SKT 3/8DR 12PT 11MM 38-312 SKT 3/8DR 12PT 12MM DP 52-212 WR COMB 12PT LNG 12MM FP 67-669 PLR SLP JNT 8 W/GRP
38-112 SKT 3/8DR 12PT 12MM 38-313 SKT 3/8DR 12PT 13MM DP 52-213 WR COMB 12PT LNG 13MM FP 67-779 PLR TNG&GRV 10 W/GRP
38-113 SKT 3/8DR 12PT 13MM 38-314 SKT 3/8DR 12PT 14MM DP 52-214 WR COMB 12PT LNG 14MM FP 69-448 HMR BLL PN 1LB WD HDL

Set 44-047 100 Pc. Metric Heavy Equipment Set - Tools Only
67-410 10" LOCKING PLIERS 38-116 SKT 3/8DR 12PT 16MM 39-124 SKT 1/2DR 12PT 24MM 52-209 WR COMB 12PT LNG 9MM FP 52-246 WR COMB 12PT LNG 46MM
11-922 EXTEN 3/8DR 3 38-117 SKT 3/8DR 12PT 17MM 40-121 SKT 3/4DR 12PT 21MM 52-210 WR COMB 12PT LNG 10MM FP 52-250 WR COMB 12PT LNG 50MM
11-925 EXTEN 3/8DR 8 38-118 SKT 3/8DR 12PT 18MM 40-122 SKT 3/4DR 12PT 22MM 52-211 WR COMB 12PT LNG 11MM FP 66-103 SCRDR SLT 5/16X6
11-935 HDL SPD 3/8DR 16-1/2 38-119 SKT 3/8DR 12PT 19MM 40-123 SKT 3/4DR 12PT 23MM 52-212 WR COMB 12PT LNG 12MM FP 66-106 SCRDR SLT 3/8X8
11-952 ADP 3/8DR 3/8FX1/2M 38-707 SKT 3/8DR HEX BIT 4MM 40-124 SKT 3/4DR 12PT 24MM 52-213 WR COMB 12PT LNG 13MM FP 66-258 SCRDR CAB 1/8X6
11-972 RAT 3/8DR 7-3/8 REPL 11-903 38-709 SKT 3/8DR HEX BIT 5MM 40-127 SKT 3/4DR 12PT 27MM 52-214 WR COMB 12PT LNG 14MM FP 67-163 PLR DIAG CUT 7-1/2 W/GRP
12-924 EXTEN 1/2DR 10 38-711 SKT 3/8DR HEX BIT 6MM 40-128 SKT 3/4DR 12PT 28MM 52-215 WR COMB 12PT LNG 15MM FP 67-305 PLR CHN NSE 6-1/3 SD CUT W/GRP
12-935 HDL SPD 1/2DR 19 38-712 SKT 3/8DR HEX BIT 7MM 40-130 SKT 3/4DR 12PT 30MM 52-216 WR COMB 12PT LNG 16MM FP 67-657 PLR SLP JNT 6-1/2
12-947 UNV JNT 1/2DR 38-713 SKT 3/8DR HEX BIT 8MM 40-132 SKT 3/4DR 12PT 32MM 52-217 WR COMB 12PT LNG 17MM FP 67-779 PLR TNG&GRV 10 W/GRP
12-952 ADP 1/2DR 1/2FX3/4M 38-714 SKT 3/8DR HEX BIT 9MM 40-136 SKT 3/4DR 12PT 36MM 52-218 WR COMB 12PT LNG 18MM FP 69-019 HMR SFT FC NO TIP 2D 2LB (2)
12-972 RAT 1/2DR 10-1/2 REPL 12-903 38-715 SKT 3/8DR HEX BIT 10MM 40-141 SKT 3/4DR 12PT 41MM 52-219 WR COMB 12PT LNG 19MM FP 69-166 HMR TIP 2 MED HD CREAM
13-918 HDL FLX 3/4DR 22 39-113 SKT 1/2DR 12PT 13MM 40-142 SKT 3/4DR 12PT 42MM 52-220 WR COMB 12PT LNG 20MM FP 69-446 HMR BLL PN 12OZ WD HDL
13-923 EXTEN 3/4DR 8 39-114 SKT 1/2DR 12PT 14MM 40-146 SKT 3/4DR 12PT 46MM 52-221 WR COMB 12PT LNG 21MM FP 69-452 HMR BLL PN 2LB WD HDL
13-972 RAT 3/4DR 19 39-115 SKT 1/2DR 12PT 15MM 40-150 SKT 3/4DR 12PT 50MM 52-222 WR COMB 12PT LNG 22MM FP 70-193 PNCH DRFT 3/16 TIP
38-110 SKT 3/8DR 12PT 10MM 39-116 SKT 1/2DR 12PT 16MM 40-155 SKT 3/4DR 12PT 55MM 52-224 WR COMB 12PT LNG 24MM FP 70-201 PNCH DRFT 3/8 TIP
38-111 SKT 3/8DR 12PT 11MM 39-117 SKT 1/2DR 12PT 17MM 40-158 SKT 3/4DR 12PT 58MM 52-226 WR COMB 12PT LNG 26MM FP 70-237 PNCH CTR 7/16
38-112 SKT 3/8DR 12PT 12MM 39-118 SKT 1/2DR 12PT 18MM 40-160 SKT 3/4DR 12PT 60MM 52-228 WR COMB 12PT LNG 28MM FP 70-305 CHSL CLD 3/8 TIP
38-113 SKT 3/8DR 12PT 13MM 39-119 SKT 1/2DR 12PT 19MM 485 GASKET SCRAPER 52-232 WR COMB 12PT LNG 32MM FP 70-313 CHSL CLD 3/4 TIP
38-114 SKT 3/8DR 12PT 14MM 39-121 SKT 1/2DR 12PT 21MM 52-207 WR COMB 12PT LNG 7MM FP 52-236 WR COMB 12PT LNG 36MM 70-519 CHSL BAR ROLL1/2X15
38-115 SKT 3/8DR 12PT 15MM 39-122 SKT 1/2DR 12PT 22MM 52-208 WR COMB 12PT LNG 8MM FP 52-241 WR COMB 12PT LNG 41MM 70-793 SET FEELER GAUGE 25 BLADE

A-18
 B
Replacement Par ts
Pipe Wrench Parts Chain Tong Parts C-Clamp Parts
Product Product Product Product Product
Number Description Number Description Number Description Number Number Description
For 73-006 Pipe Wrench For 73-231 Chain Tong For 78-090 C-Clamp For 78-303 C-Clamp For 78-412 C-Clamp
95-055..........Hook Jaw 95-203..........Flat Chain 95-401.......Standard Length 95-458.......Standard Length 95-475.......Standard Length
95-056...........Insert Jaw with Pin 95-204..........Pair of Jaws Screw Screw with Handle Screw with Handle
95-057..........Adjusting Nut 95-205..........Bolt and Nut Set For 78-091 C-Clamp 95-411.......Swivel Pad 95-419.......Swivel Pad
95-058..........Spring Assembly For 73-233 Chain Tong 95-405.......Full Length Screw For 78-304 C-Clamp For 78-413 C-Clamp
For 73-008 Pipe Wrench 95-209..........Flat Chain For 78-092 C-Clamp 95-461.......Standard Length 95-419.......Full Length Screw
95-063..........Hook Jaw 95-210..........Pair of Jaws 95-401.......Standard Length Screw with Handle with Handle
95-064...........Insert Jaw with Pin 95-205........Bolt and Nut Set Screw 95-415.......Swivel Pad 95-419.......Swivel Pad
95-065..........Adjusting Nut For 73-235 Chain Tong For 78-093 C-Clamp For 78-306 C-Clamp For 78-431 C-Clamp
95-066..........Spring Assembly 95-215..........Flat Chain 95-407.......Full Length Screw 95-465.......Standard Length 95-500.......Standard Length
For 73-010 Pipe Wrench 95-216..........Pair of Jaws For 78-102 C-Clamp Screw with Handle Screw with Handle
95-071..........Hook Jaw 95-217..........Bolt and Nut Set 95-410.......Standard Length 95-415.......Swivel Pad 95-501.......Swivel Pad
95-072...........Insert Jaw with Pin For 73-237 Chain Tong Screw with Handle For 78-308 C-Clamp For 78-433 C-Clamp
95-073..........Adjusting Nut 95-221..........Flat Chain 95-411.......Swivel Pad 95-468.......Standard Length 95-508.......Full Length Screw
95-074..........Spring Assembly 95-222..........Pair of Jaws For 78-103 C-Clamp Screw with Handle with Handle
For 73-012 Pipe Wrench 95-223..........Bolt and Nut Set 95-414 Standard Length 95-419.......Swivel Pad 95-505.......Swivel Pad
95-079..........Hook Jaw Screw with Handle For 78-333 C-Clamp For 78-434 C-Clamp
95-080...........Insert Jaw with Pin 95-415.......Swivel Pad 95-508.......Standard Length 95-511.......Standard Length
95-081..........Adjusting Nut Chain Wrench Parts For 78-104 C-Clamp Screw with Handle Screw with Handle
95-082..........Spring Assembly 95-418 Standard Length 95-505.......Swivel Pad 95-512.......Swivel Pad
For 73-014 Pipe Wrench Product Screw with Handle For 78-334 C-Clamp For 78-436 C-Clamp
95-087..........Hook Jaw Number Description 95-419.......Swivel Pad 95-511.......Standard Length 95-515.......Standard Length
95-080...........Insert Jaw with Pin For 73-295 Chain Wrench For 78-106 C-Clamp Screw with Handle Screw with Handle
95-512.......Swivel Pad
Replacement Par ts

95-089..........Adjusting Nut 95-351..........Chain with Pin 95-418.......Standard Length 95-512.......Swivel Pad

95-090..........Spring Assembly For 73-299 Chain Wrench Screw with Handle For 78-336 C-Clamp For 78-438 C-Clamp
For 73-018 Pipe Wrench 95-355..........Chain with Pin 95-419.......Swivel Pad 95-515.......Standard Length 95-518.......Standard Length
95-095..........Hook Jaw For 78-107 C-Clamp Screw with Handle Screw with Handle
95-096...........Insert Jaw with Pin 95-422.......Full Length Screw 95-512.......Swivel Pad 95-519.......Swivel Pad
95-097..........Adjusting Nut C-Clamp Parts with Handle For 78-338 C-Clamp For 78-440 C-Clamp
95-098..........Spring Assembly 95-419.......Swivel Pad 95-518.......Standard Length 95-518.......Standard Length
For 73-024 Pipe Wrench Product For 78-108 C-Clamp Screw with Handle Screw with Handle
95-103..........Hook Jaw Number Description 95-418.......Standard Length 95-519.......Swivel Pad 95-519.......Swivel Pad
95-104...........Insert Jaw with Pin Screw with Handle For 78-401, 601 and For 78-441 C-Clamp
95-105..........Adjusting Nut For 78-000 C-Clamp 95-419.......Swivel Pad 631 C-Clamp 95-522.......Full Length Screw
95-106..........Spring Assembly 95-375..........Standard Length For 78-109 C-Clamp 95-450.......Standard Length with Handle
For 73-036 Pipe Wrench Screw 95-424.......Full Length Screw Screw with Handle 95-519.......Swivel Pad
95-111..........Hook Jaw For 78-010 C-Clamp with Handle 95-451.......Swivel Pad For 78-442 C-Clamp
95-112...........Insert Jaw with Pin 95-377..........Standard Length 95-419.......Swivel Pad For 78-402, 602 and 95-525.......Standard Length
95-113..........Adjusting Nut Screw For 78-110 C-Clamp 632 C-Clamp Screw with Handle
95-114..........Spring Assembly For 78-015 C-Clamp 95-418.......Standard Length 95-454.......Standard Length 95-519.......Swivel Pad
For 73-048 Pipe Wrench 95-379..........Standard Length Screw with Handle Screw with Handle For 78-443 C-Clamp
95-119..........Hook Jaw Screw 95-419.......Swivel Pad 95-411.......Swivel Pad 95-529.......Full Length Screw
95-120...........Insert Jaw with Pin For 78-020 C-Clamp For 78-111 C-Clamp For 78-403, 603 and with Handle
95-121..........Adjusting Nut 95-381..........Standard Length 95-426.......Full Length Screw 633 C-Clamp 95-519.......Swivel Pad
95-122..........Spring Assembly Screw with Handle 95-458.......Standard Length
For 78-021 C-Clamp 95-419.......Swivel Pad Screw with Handle
95-383..........Full Length Screw For 78-112 C-Clamp 95-411.......Swivel Pad
Chain Tong Parts For 78-030 C-Clamp 95-429.......Standard Length For 78-404, 604 and
95-385.......Standard Length Screw with Handle 634 C-Clamps
Product Screw 95-430.......Swivel Pad 95-461.......Standard Length
Number Description For 78-031 C-Clamp For 78-113 C-Clamp Screw with Handle
95-387.......Full Length Screw 95-433.......Full Length Screw 95-415.......Swivel Pad
For 73-205 Chain Tong For 78-040 C-Clamp For 78-406, 606 and
with Handle
95-152..........Flat Chain 95-389.......Standard Length 636 C-Clamp
95-430.......Swivel Pad
95-153..........Pair of Jaws Screw For 78-115 C-Clamp 95-465.......Standard Length
95-154..........Bolt and Nut Set For 78-041 C-Clamp Screw with Handle
95-429.......Standard Length
For 73-207 Chain Tong 95-391.......Full Length Screw 95-415.......Swivel Pad
Screw with Handle
95-158..........Flat Chain For 78-050 C-Clamp For 78-408, 608 and
95-430.......Swivel Pad
95-159..........Pair of Jaws 95-393.......Standard Length For 78-116 C-Clamp 638 C-Clamp
95-160..........Bolt and Nut Set Screw 95-468.......Standard Length
95-435.......Full Length Screw
For 73-209 Chain Tong For 78-051 C-Clamp Screw with Handle
with Handle
95-164..........Flat Chain 95-395.......Full Length Screw 95-419.......Swivel Pad
95-430.......Swivel Pad
95-165..........Pair of Jaws For 78-060 C-Clamp For 78-118 C-Clamp For 78-410, 610 and
95-166..........Bolt and Nut Set 95-397.......Full Length Screw 640 C-Clamps
95-429.......Standard Length
For 73-211 Chain Tong For 78-061 C-Clamp 95-468.......Standard Length
Screw with Handle
95-170..........Flat Chain 95-399.......Standard Length Screw with Handle
95-430.......Swivel Pad
95-171..........Pair of Jaws Screw For 78-119 C-Clamp 95-419.......Swivel Pad
95-172..........Bolt and Nut Set For 78-080 C-Clamp For 78-411 C-Clamp
95-437.......Full Length Screw
For 73-229 Chain Tong 95-401.......Standard Length 95-472.......Full Length Screw
with Handle
95-197..........Flat Chain Screw with Handle
95-430.......Swivel Pad
95-198..........Pair of Jaws For 78-081 C-Clamp 95-419.......Swivel Pad
95-199..........Bolt and Nut Set 95-403.......Full Length Screw

B-1
B-1
 C
Decimal Equivalent Char t
Decimal Equivalents of Millimeter, Fractional and Number Drill Sizes
1mm = 0.03937 in. 1 foot = 0.3048 m 1 sq. cm = 0.155 sq.in. 1 lb. = 373.24 grams
1 cm = 0.3937 in. 1 yd. = 0.9144 m 1 sq. dm = 15.5 sq. in. 1 qt. = 0.9463 liters (liquid)
1 dm = 3.937 in. 1 sq. in. = 6.452 sq. cm 1 sq. m = 1.196 sq. yd. 1 gal. = 3.7853 liters (liquid)
1 m = 39.37 in. 1 sq. ft. = 929 sq. cm 1 oz. = 31.1035 grams 1 liter = 1.0567 liquid qt.
1 in. = 25.4 mm 1 sq. yd. = 0.8361 sq. m

Milli- Dec. Frac- Num- Milli- Dec. Frac- Num- Milli- Dec. Frac- Num- Milli- Dec. Frac- Num- Milli- Dec. Frac- Num-
meter Equiv. tional ber meter Equiv. tional ber meter Equiv. tional ber meter Equiv. tional ber meter Equiv. tional ber

.1 .0039 1.75 .0689 .... .1570 22 6.8 .2677 10.72 .4219 27/64 ..
.15 .0059 .... .0700 50 4.0 .1575 6.9 .2716 11.0 .4330
.2 .0079 1.8 .0709 .... .1590 21 .... .2720 I 11.11 .4375 7/16 ..
.25 .0098 1.85 .0728 .... .1610 20 7.0 .2756 11.5 .4528
.3 .0118 .... .0730 49 4.1 .1614 .... .2770 J 11.51 .4531 29/64 ..
.... .0135 80 1.9 .0748 4.2 .1654 7.1 .2795 11.91 .4687 15/32 ..
.35 .0138 .... .0760 48 .... .1660 19 .... .2811 K 12.0 .4724
.... .0145 79 1.95 .0767 4.25 .1673 7.14 .2812 9/32 .. 12.30 .4843 31/64 ..
.39 .0156 1/64 .. 1.98 .0781 5/64 .. 4.3 .1693 7.2 .2835 12.5 .4921
.4 .0157 .... .0785 47 .... .1695 18 7.25 .2854 12.7 .5000 1/2 ..
.... .0160 78 2.0 .0787 4.37 .1719 11/64 .. 7.3 .2874 13.0 .5118

Decimal Equivalent Char t

.45 .0177 2.05 .0807 .... .1730 17 .... .2900 L 13.10 .5156 33/64 ..
.... .0180 77 .... .0810 46 4.4 .1732 7.4 .2913 13.49 .5312 17/32 ..
.5 .0197 .... .0820 45 .... .1770 16 .... .2950 M 13.5 .5315
.... .0200 76 2.1 .0827 4.5 .1771 7.5 .2953 13.89 .5469 35/64 ..
.... .0210 75 2.15 .0846 .... .1800 15 7.54 .2968 19/64 .. 14.0 .5512
.55 .0217 .... .0860 44 4.6 .1811 7.6 .2992 14.29 .5625 9/16 ..
.... .0225 74 2.2 .0866 .... .1820 14 .... .3020 N 14.5 .5709
.6 .0236 2.25 .0885 4.7 .1850 13 7.7 .3031 14.68 .5781 37/64 ..
.... .0240 73 .... .0890 43 4.75 .1870 7.75 .3051 15.0 .5906
.... .0250 72 2.3 .0905 4.76 .1875 3/16 .. 7.8 .3071 15.08 .5937 19/32 ..
.65 .0256 2.35 .0925 4.8 .1890 12 7.9 .3110 15.48 .6094 39/64 ..
.... .0260 71 .... .0935 42 .... .1910 11 7.94 .3125 5/16 .. 15.5 .6102
.... .0280 70 2.38 .0937 3/32 .. 4.9 .1929 8.0 .3150 15.88 .6250 5/8 ..
.7 .0286 2.4 .0945 .... .1935 10 .... .3160 O 16.0 .6299
.... .0292 69 .... .0960 41 .... .1960 9 8.1 .3189 16.27 .6406 41/64 ..
.75 .0295 2.45 .0964 5.0 .1968 8.2 .3228 16.5 .6496
.... .0310 68 .... .0980 40 .... .1990 8 .... .3230 P 16.67 .6562 21/32 ..
.79 .0312 1/32 .. 2.5 .0984 5.1 .2008 8.25 .3248 17.0 .6693
.8 .0315 .... .0995 39 .... .2010 7 8.3 .3268 17.06 .6719 43/64 ..
.... .0320 67 .... .1015 38 5.16 .2031 13/64 .. 8.33 .3281 21/64 .. 17.46 .6875 11/16 ..
.... .0330 66 2.6 .1024 .... .2040 6 8.4 .3307 17.5 .6890
.85 .0335 .... .1040 37 5.2 .2047 .... .3320 Q 17.86 .7031 45/64 ..
.... .0350 65 2.7 .1063 .... .2055 5 8.5 .3346 18.0 .7087
.9 .0354 .... .1065 36 5.25 .2067 8.6 .3386 18.26 .7187 23/32 ..
.... .0360 64 2.75 .1082 5.3 .2086 .... .3390 R 18.5 .7283
.... .0370 63 2.78 .1094 7/64 .. .... .2090 4 8.7 .3425 18.65 .7344 47/64 ..
.95 .0374 .... .1100 35 5.4 .2126 8.73 .3437 11/32 .. 19.0 .7480
.... .0380 62 2.8 .1102 .... .2130 3 8.75 .3445 19.05 .7500 3/4 ..
.... .0390 61 .... .1110 34 5.5 .2165 8.8 .3465 19.45 .7656 49/64 ..
1.0 .0394 .... .1130 33 5.56 .2187 7/32 .. .... .3480 S 19.5 .7677
.... .0400 60 2.9 .1141 5.6 .2205 8.9 .3504 19.84 .7812 25/32 ..
.... .0410 59 .... .1160 32 .... .2210 2 9.0 .3543 20.0 .7874
1.05 .0413 3.0 .1181 5.7 .2244 .... .3580 T 20.24 .7969 51/64 ..
.... .0420 58 .... .1200 31 5.75 .2263 9.1 .3583 20.5 .8071
.... .0430 57 3.1 .1220 .... .2280 1 9.13 .3594 23/64 .. 20.64 .8125 13/16 ..
1.1 .0433 3.18 .1250 1/8 .. 5.8 .2283 9.2 .3622 21.0 .8268
1.15 .0452 3.2 .1260 5.9 .2323 9.25 .3641 21.03 .8281 53/64 ..
.... .0465 56 3.25 .1279 .... .2340 A 9.3 .3661 21.43 .8437 27/32 ..
1.19 .0469 3/64 .. .... .1285 30 5.95 .2344 15/64 .. .... .3680 U 21.5 .8465
1.2 .0472 3.3 .1299 6.0 .2362 9.4 .3701 21.83 .8594 55/64 ..
1.25 .0492 3.4 .1338 .... .2380 B 9.5 .3740 22.0 .8661
1.3 .0512 .... .1360 29 6.1 .2401 9.53 .3750 3/8 .. 22.23 .8750 7/8 ..
.... .0520 55 3.5 .1378 .... .2420 C .... .3770 V 22.5 .8858
1.35 .0531 .... .1405 28 6.2 .2441 9.6 .3780 22.62 .8906 57/64 ..
.... .0550 54 3.57 .1406 9/64 .. 6.25 .2460 D 9.7 .3819 23.0 .9055
1.4 .0551 3.6 .1417 6.3 .2480 9.75 .3838 23.02 .9062 29/32 ..
1.45 .0570 .... .1440 27 6.35 .2500 1/4 E 9.8 .3858 23.42 .9219 59/64 ..
1.5 .0591 3.7 .1457 6.4 .2520 .... .3860 W 23.5 .9252
.... .0595 53 .... .1470 26 6.5 .2559 9.9 .3898 23.81 .9375 15/16 ..
1.55 .0610 3.75 .1476 .... .2570 F 9.92 .3906 25/64 .. 24.0 .9449
1.59 .0625 1/16 .. .... .1495 25 6.6 .2598 10.0 .3937 24.21 .9531 61/64 ..
1.6 .0629 3.8 .1496 .... .2610 G .... .3970 X 24.5 .9646
.... .0635 52 .... .1520 24 6.7 .2638 .... .4040 Y 24.61 .9687 31/32 ..
1.65 .0649 3.9 .1535 6.75 .2656 17/64 .. 10.32 .4062 13/32 .. 25.0 .9843
1.7 .0669 .... .1540 23 6.75 .2657 .... .4130 Z 25.03 .9844 63/64 ..
.... .0670 51 3.97 .1562 5/32 .. .... .2660 H 10.5 .4134 25.4 1.0000 1 ..

C-1
 C
Wrench Sizing Char ts
Standard Wrench Sizing Charts
NOMINAL OPENING SIZES OF ARMSTRONG WRENCHES OR SOCKETS IN INCHES TO FIT STANDARD BOLT HEADS, NUTS AND SCREW HEADS
BOLTS - SCREWS NUTS
SQUARE
AND HEX HEX NUTS
WRENCH OR SOCKET BOLTS, CAP HEX HEX SQUARE TRACK, & FLAT
SIZE SCREWS & HEAVY WASHER HEX WASHER SQUARE NUTS HEAVY HEX CSTLE. SIZE
SQUARE & HEX HEX HEAD HEAD HEAD HEAD & HEAVY & SQUARE, SQUARE SLOTTED HEX TRACK HEX
ACROSS DECIMAL HEX LAG BOLTS & FLANGE TAPPING TAPPING MACHINE MACHINE SET SQUARE FLAT AND MACHINE AND HAM FLANGE BOLT LOCK
FLATS EQUIV. SCREWS SCREWS SCREWS SCREWS SCREWS SCREWS SCREWS SCREWS NUTS JAM NUTS SCREW NUT HEX NUT NUTS NUTS NUTS
1/8 0.1250 – – – #1&2 #2&3 #1&2 #1&2 – – – – – – – –
5/332 0.1562 – – – – – – – – – – #0&1 – – – –
3/16 0.1875 – – – #3,4,5 #3,4,5 #3,4,5 #3,4,5 #10 – – #2&3 – – – –
1/4 0.2500 – – – #6,7,8 #6,7,8 #6&8 #6&8 1/4 – – #4 – – – #4
9/32 0.2812 #10 – – – – – – – – – – – – – –
5/16 0.3125 – – – #10&12 #10&12 #10&12 #10&12 5/16 – – #5&6 – #6 – #6
11/32 0.3438 – – – – – – – – – – #8 – #8 – #8
3/8 0.3750 1/4 – 1/4 1/4 1/4 1/4 1/4 3/8 – – #10 – #10 – #10
7/16 0.4375 1/4 – – –- – – 7/16 1/4 – – #12&14 1/4 #12&14 – #12&14
1/2 0.5000 5/16 – 5/16 5/16 5/16 5/16 5/16 1/2 1/4 1/4 – 5/16 5/16 – 5/16
9/16 0.5625 3/8 – 3/8 3/8 3/8 3/8 3/8 9/16 5/16 5/16 5/16 3/8 3/8 – 3/8
5/8 0.6250 7/16 – 7/16 – – – – 5/8 3/8 – 3/8 – – – –
11/16 0.6875 – – – – – – – – 3/8 3/8 – 7/16 7/16 – 7/16
3/4 0.7500 1/2 – 1/2 – – – – 3/4 7/16 7/16 – 1/2 1/2 – 1/2
Wrench Sizing Char ts

13/16 0.8125 9/16 – 9/16 – – – – – 1/2 – – – – – –

7/8 0.8750 – 1/2 – – – – – 7/8 1/2 1/2 – 9/16 9/16 – 9/16
15/16 0.9375 3/8 – 5/8 – – – – – – 9/16 – 5/8 5/8 – 5/8
1 1.0000 – – – – – – – 1 5/8 – – – – – –
1 1/16 1.0625 – 5/8 – – – – – – 5/8 5/8 – – – – –
1 1/8 1.1250 3/4 – 3/4 – – – –- 1 1/8 3/4 – – 3/4 3/4 – 3/4
1 1/4 1.2500 – 3/4 – – – – – 1 1/4 3/4 3/4 – – – 3/4&13/16 –
1 5/16 1.3125 7/8 – – – – – – – 7/8 – – 7/8 – – 7/8
1 3/8 1.3750 – – – – – – – 1 3/8 – – – – – – –
1 7/16 1.4375 – 7/8 – – – – – – 7/8 7/8 – – – 7/8 –
1 1/2 1.5000 1 – – – – – – 1 1/2 1 – – 1 – 15/16&1 1
1 5/8 1.6250 – 1 – – – – – – 1 1 – – – 1&1 1/16 –
1 11/16 1.6875 1 1/8 – – – – – – – 1 1/8 – – 1 1/2 – 1 1/8 1 1/8
1 13/16 1.8125 – 1 1/8 – – – – – – 1 1/8 1 1/8 – – – 1 1/8 –
1 7/8 1.8750 1 1/4 – – – – – – – 1 1/4 - – 1 1/4 – – 1 1/4
2 2.0000 – 1 1/4 – – – – – – 1 1/4 1 1/4 – – – – –
2 1/16 2.0625 1 3/8 – – – – – – – 1 3/8 – – 1 3/8 – – 1 3/8
2 3/16 2.1875 – 1 3/8 – – – – – – 1 3/8 1 3/8 – – – – –
2 1/4 2.2500 1 1/2 – – – – – – – 1 1/2 – – 1 1/2 – – 1 1/2
2 3/8 2.3750 – 1 1/2 – – – – – – 1 1/2 1 1/2 – – – – –
2 7/16 2.4375 1 5/8 – – – – – – – – – – – – – –
2 9/16 2.5625 – 1 5/8 – – – – – – – 1 5/8 – – – – –
2 5/8 2.6250 1 3/4 – – – – – – – – – – – – – –
2 3/4 2.7500 – 1 3/4 – – – – – – – 1 3/4 – – – – –
2 13/16 2.1825 1 7/8 - – – – – – – – - – – – –
2 15/16 2.9375 –- 1 7/8 – – – – – – – 1 7/8 – – – – –
3 3.0000 2 – – – – – – – – – – – – – –
3 1/8 3.1250 – 2 – – – – – – – 2 – – – – –
3 3/8 3.3750 2 1/4 – – – – – – – – – – – – – –
3 1/2 3.5000 – 2 1/4 – – – – – – – 2 1/4 – – – – –
3 3/4 3.7500 2 1/2 – – – – – – – – – – – – – –
3 7/8 3.8750 – 2 1/2 – – – – – – – 2 1/2 – – – – –
4 1/8 4.1250 2 3/4 – – – – – – – – – – – – – –
4 1/4 4.2500 – 2 3/4 – – – – – – – 2 3/4 – – – –- –
4 1/2 4.5000 3 – – – – – – – – – – – – – –
4 5/8 4.6250 – 3 – – – – – – – 3 – – – – –
4 7/8 4.8750 3 1/4 – – – – – – – – – – – – – –
5 5.0000 – 3 1/4 – – – – – – – 3 1/4 – – – – –
5 1/4 5.2500 3 1/2 – – – – – – – – 3 1/2 – – – – –
5 3/8 5.3750 – 3 1/2 – – – – – – – 3 1/2 – – – – –
5 5/8 5.6250 3 3/4 – – – – – – – – 3 3/4 – – – – –
5 3/4 5.7500 – 3 3/4 – – – – – – – 3 3/4 – – – – –
6 6.0000 4 – – – – – – – – 4 – – – – –
6 1/8 6.1250 – 4 – – – – – – – 4 – – – – –
6 1/2 6.5000 – 4 1/4 – – – – – – – – – – – – –
6 7/8 6.8750 – 4 1/2 – – – – – – – – – – – – –
7 1/4 7.2500 – 4 3/4 – – – – – – – – – – – – –
7 5/8 7.6250 – 5 – – – – – – – – – – – – –
8 8.0000 – 5 1/4 – – – – – – – – – – – – –
8 3/8 8.3750 – 5 1/2 – – – – – – – – – – – – –
8 3/4 8.7500 – 5 3/4 – – – – – – – – – – – – –
9 1/8 9.1250 – 6 – – – – – – – – – – – – –

C-2
C-2
 C
Wrench Sizing Char ts
Metric Wrench Sizing Chart
Nominal opening sizes of Armstrong wrenches or sockets in identification of bolt, nut or screw at top of vertical column.
millimeters to fit standard bolt heads, nuts and screw heads. The size listed is the nominal opening size in millimeters of the
Locate thread diameter of bolt, nut or screw in extreme left or Armstrong wrenches and sockets that will fit.
right column. Then move across to box which has proper American Standards Association — ASA B18.2

BOLTS NUTS
WRENCH OR WRENCH OR
SOCKET HEAVY SOCKET
SIZE HEAVY HEX HEX HEX SLOTTED HEAVY SIZE
ACROSS HEX HEX STRUCTURAL NUTS NUTS AND HAM HEX ACROSS
FLATS BOLTS BOLTS BOLTS STYLE 1 STYLE 2 HEX NUTS NUTS FLATS
Use wrench or socket size shown below Use wrench or socket size shown below
3.20 — — — M1.6 x 0.35 — — — 3.20
4.00 — — — M2 x 0/4 — — — 4.00
5.00 — — — M2.5 x 0.45 — — — 5.00
5.50 — — — M3 x 0.5 M3 X 0.5 — — 5.50
6.00 — — — M3.5 x 0.6 M3.5 x 0.6 — — 6.00
7.00 — — — M4 x 0.7 M4 x 0.7 — — 7.00

Wrench Sizing Char ts

8.00 M5 x 0.8 — — M5 x 0. 8 M5 x 0. 8 M5 x 0. 8 — 8.00
10.00 M6 x 1 — — M6 x 1 M6 x 1 M6 x 1 — 10.00
13.00 M8 x 1.25 — — M8 x 1.25 M8 x 1.25 M8 x 1.25 — 13.00
15.00 M10 x 1.5 — — M10 x 1.5 M10 x 1.5 M10 x 1.5 — 1500
16.00 M10 x 1.5 — — M10 x 1.5 M10 x 1.5 M10 x 1.5 — 1600
18.00 M12 x 1.75 — — M12 x 1.75 M12 x 1.75 M12 x 1.75 — 1800
21.00 M14 x 2 M12 x 1.75 — M14 x 2 M14 x 2 M14 x 2 M12 x 1.75 21.00
24.00 M16 x 2 M14 x 2 — M16 x 2 M16 x 2 M16 x 2 M14 x 2 24.00
27.00 — M16 x 2 M16 x 2 — — — M16 x 2 27.00
30.00 M20 x 2.5 — — M20 x 2.5 M20 x 2.5 M20 x 2.5 — 30.00
34.00 — M20 x 2.5 M20 x 2.5 — — — M20 x 2.5 34.00
36.00 M24 x 3 — M22 x 2.5 M24 x 3 M24 x 3 M24 x 3 M22 x 2.5 36.00
41.00 — M24 x 3 M24 x 3 — — — M24 x 3 41.00
46.00 M30 x 3.5 — M27 x 3 M30 x 3.5 M30 x 3.5 M30 x 3.5 M27 x 3 46.00
50.00 — M30 x 3.5 M30 x 3.5 — — — M30 x 3.5 50.00
55.00 M36 x 4 — — M36 x 4 M36 x 4 M36 x 4 — 55.00
60.00 — M36 x 4 M36 x 4 — M36 x 4 60.00 — —
65.00 M42 x 4.5 — — — — — — 65.00
70.00 — — — — — — M42 x 4.5 70.00
75.00 M48 x 5 — — — — — — 75.00
80.00 — — — — — — M48 x 5 80.00
85.00 M56 x 5.5 — — — — — — 85.00
90.00 — — — — — — M56 x 5.5 90.00
95.00 M64 x 6 — — — — — - 95.00
100.00 — — — — — — M64 x 6 100.00
105.00 M72 x 6 — — — — — - 105.00
110.00 — — — — — — M72 x 6 110.00
115.00 M80 x 6 — — — — — - 115.00
120.00 — — — — — — M80 x 6 120.00
130.00 M90 x 6 — — — — — - 130.00
135.00 — — — — — M90 x 6 135.00
145.00 M100 x 6 — — — — — - 145.00
150.00 - — — — — — M100 x 6 150.00

C-3
 C
Metric Conversion Char ts
Conversion from Millimeters to Inches Conversion from Decimal Inches to Millimeters
mm inch mm inch mm inch inch mm inch mm inch mm
1 0.039 370 08 36 1.417 322 8 71 2.795 275 6 1 25.4 36 914.4 71 1803.4
2 0.078 740 16 37 1.456 692 9 72 2.834 645 7 2 50.8 37 939.8 72 1828.8
3 0.118 110 24 38 1.496 063 0 73 2.874 015 7 3 76.2 38 965.2 73 1854.2
4 0.157 480 31 39 1.535 433 1 74 2.913 385 8 4 101.6 39 990.6 74 1879.6
5 0.196 850 39 40 1.574 803 1 75 2.952 755 9 5 127.0 40 1016.0 75 1905.0
6 0.236 220 47 41 1.614 173 2 76 2.992 126 0 6 152.4 41 1041.4 76 1930.4
7 0.275 590 55 42 1.653 543 3 77 3.031 496 1 7 177.8 42 1066.8 77 1955.8
8 0.314 960 63 43 1.692 913 4 78 3.070 866 1 8 203.2 43 1092.2 78 1981.2
9 0.354 330 71 44 1.732 283 5 79 3.110 236 2 9 228.6 44 1117.6 79 2006.6
10 0.393 700 8 45 1.771 653 5 80 3.149 606 3 10 254.0 45 1143.0 80 2032.0
11 0.433 070 9 46 1.811 023 6 81 3.188 976 4 11 279.4 46 1168.4 81 2057.4
12 0.472 440 9 47 1.850 393 7 82 3.228 346 5 12 304.8 47 1193.8 82 2082.8
13 0.511 811 0 48 1.889 763 8 83 3.267 716 5 13 330.2 48 1219.2 83 2108.2
14 0.551 181 1 49 1.929 133 9 84 3.307 086 6 14 355.6 49 1244.6 84 2133.6
15 0.590 551 2 50 1.968 503 9 85 3.346 456 7 15 381.0 50 1270.0 85 2159.0
16 0.629 921 3 51 2.007 874 0 86 3.385 826 8 16 406.4 51 1295.4 86 2184.4
17 0.669 291 3 52 2.047 244 1 87 3.425 196 8 17 431.8 52 1320.8 87 2209.8
18 0.708 661 4 53 2.086 614 2 88 3.464 566 9 18 457.2 53 1346.2 88 2235.2
19 0.748 031 5 54 2.125 984 2 89 3.503 937 0 19 482.6 54 1371.6 89 2260.6
20 0.787 401 6 55 2.165 354 3 90 3.543 307 1 20 508.0 55 1397.0 90 2286.0
21 0.826 771 7 56 2.204 724 4 91 3.582 677 2 21 533.4 56 1422.4 91 2311.4
22 0.866 141 7 57 2.244 094 5 92 3.622 047 2 22 558.8 57 1447.8 92 2336.8
23 0.905 511 8 58 2.283 464 6 93 3.661 417 3 23 584.2 58 1473.2 93 2362.2
Metric Conversion Char ts

24 0.944 881 9 59 2.322 834 6 94 3.700 787 4 24 609.6 59 1498.6 94 2387.6

25 0.984 252 0 60 2.362 204 7 95 3.740 157 5 25 635.0 60 1524.0 95 2413.0
26 1.023 622 0 61 2.401 574 8 96 3.779 527 6 26 660.4 61 1549.4 96 2438.4
27 1.062 992 1 62 2.440 944 9 97 3.818 897 6 27 685.8 62 1574.8 97 2463.8
28 1.102 362 2 63 2.480 315 0 98 3.858 267 7 28 711.2 63 1600.2 98 2489.2
29 1.141 732 3 64 2.519 685 0 99 3.897 637 8 29 736.6 64 1625.6 99 2514.6
30 1.181 102 4 65 2.559 055 1 100 3.937 008 30 762.0 65 1651.0 100 2540.0
31 1.220 472 4 66 2.598 425 2 31 787.4 66 1676.4
32 1.259 842 5 67 2.637 795 3 32 812.8 67 1701.8
33 1.299 212 6 68 2.677 165 4 33 838.2 68 1727.2
34 1.338 582 7 69 2.716 535 4 mm ÷ 25.4 = inch 34 863.6 69 1752.6 inch x 25.4 = mm
35 1.377 952 8 70 2.755 905 5 35 889.0 70 1778.0
NOTE: The table values for inches are rounded off. NOTE: All table values are exact.

Conversion from Fractional Inches to Millimeters Conversion from Ft.-Lbs. to Meter-Kilograms

inch mm inch mm Ft. 0 1 2 3 4 5 6 7 8 9
Lbs. Mkgs Mkgs Mkgs Mkgs Mkgs Mkgs Mkgs Mkgs Mkgs Mkgs
1/64 0.015 625 0.396 875 33/64 0.515 625 13.096 875
1/32 0.031 250 0.793 750 17/32 0.531 250 13.493 750 0 0 .14 .28 .42 .55 .69 .83 .97 1.11 1.25
3/64 0.046 875 1.190 625 35/64 0.546 875 13.890 625
10 1.38 1.52 1.66 1.80 1.94 2.07 2.21 2.35 2.49 2.63
1/16 0.062 500 1.587 500 9/16 0.562 500 14.287 500
20 2.77 2.90 3.04 3.18 3.32 3.46 3.60 3.73 3.87 4.01
5/64 0.078 125 1.984 375 37/64 0.578 125 14.684 375
3/32 0.093 750 2.381 250 19/32 0.593 750 15.081 250 30 4.15 4.29 4.43 4.56 4.70 4.84 4.98 5.12 5.26 5.39
7/64 0.109 375 2.778 125 39/64 0.609 375 15.478 125 40 5.53 5.67 5.81 5.95 6.09 6.22 6.36 6.50 6.64 6.78
1/8 0.125 000 3.175 000 5/8 0.625 000 15.875 000 50 6.92 7.05 7.19 7.33 7.47 7.61 7.75 7.88 8.02 8.16
9/64 0.140 625 3.571 875 41/64 0.640 625 16.271 875 60 8.30 8.44 8.57 8.71 8.85 8.90 9.13 9.27 9.40 9.54
5/32 0.156 250 3.968 750 21/32 0.656 250 16.668 750 70 9.68 9.82 9.96 10.09 10.23 10.37 10.51 10.65 10.79 10.92
11/64 0.171 875 4.365 625 43/64 0.671 875 17.065 625
80 11.01 11.20 11.34 11.48 11.62 11.75 11.89 12.03 12.17 12.31
3/16 0.187 500 4.762 500 11/16 0.687 500 17.462 500
90 12.45 12.59 12.73 12.86 13.00 13.14 13.28 13.42 13.55 13.69
13/64 0.203 125 5.159 375 45/64 0.703 125 17.859 375
7/32 0.218 750 5.556 250 23/32 0.718 750 18.256 250 100 13.83 13.97 14.11 14.25 14.38 14.52 14.66 14.80 14.94 15.08
15/64 0.234 375 5.953 125 47/64 0.734 375 18.653 125 110 15.21 15.35 15.49 15.63 15.76 15.90 16.04 16.18 16.32 16.46
1/4 0.250 000 6.350 000 3/4 0.750 000 19.050 000
NOTE: The chart above can be used to convert foot-pounds to meter-kilograms. Down
17/64 0.265 625 6.746 875 49/64 0.765 625 19.446 875 the left side the foot-pound column increases from 0 to 110 ft.-lbs. in increments of
9/32 0.281 250 7.143 750 25/32 0.781 250 19.843 750
19/64 0.296 875 7.540 625 51/64 0.796 875 20.240 625 10 ft.-lbs. For additional ft.-lbs. increments use the top row of numbers. For
example, if you want to know the conversion of 55 ft-lbs., locate the number 50 in
5/16 0.312 500 7.937 500 13/16 0.812 500 20.637 500 the left column and the number 5 in the top row. You then read across and down to
21/64 0.328 125 8.334 375 53/64 0.828 125 21.034 375 find the conversion of 7.61 mkgs.
11/32 0.343 750 8.731 250 27/32 0.843 750 21.431 250 Ft.-Lbs. x .1383 = Meter-Kilograms
23/64 0.359 375 9.128 125 55/64 0.859 375 21.828 125
3/8 0.375 000 9.525 000 7/8 0.875 000 22.225 000
25/64 0.390 625 9.921 875 57/64 0.890 625 22.621 875
13/32 0.406 250 10.318 750 29/32 0.906 250 23.018 750
27/64 0.421 875 10.715 625 59/64 0.921 875 23.415 625
7/16 0.437 500 11.112 500 15/16 0.937 500 23.812 500
29/64 0.453 125 11.509 375 61/64 0.953 125 24.209 375
15/32 0.468 750 11.906 250 31/32 0.968 750 24.606 250
31/64 0.484 375 12.303 125 63/64 0.984 375 25.003 125
1/2 0.500 000 12.700 000 1 1.000 000 25.400 000
NOTE: All table values are exact.

C-4
 C
Standard Tor que Value Char t
Min. Body Size or Outside Diameter of Fastener
Fastener Type Tensile Material
Strength 2 3 4 5 6 8 10 ‹ ˇ › Á fi ¨ fl ‡ Œ 1 1¤ 1‹ 1› 1fi 1fl 1‡ 1Œ 2 2‹ 2fi 2‡ 3

SAE 0-1-2 74,000 Alloy 6 12 20 32 47 69 96 155 206 310 480 675 900 1100 1470 1900 2360 2750 3450 4400 7350 9500
PSI Steel

Medium
SAE 3 100,000 Carbon
9 17 30 47 69 103 145 234 372 551 872 1211 1624 1943 2660 3463 4695 5427 7226 8049 13450 17548
PSI Steel

Medium
SAE 5 120,000 Carbon 10 19 33 54 78 114 154 257 382 587 794 1105 1500 1775 2425 3150 4200 4550 6550 7175 13000 16000
PSI Heat Treat
Steel

Medium
Carbon

Standar d Torque Value Char t

SAE 6 133,000 Steel 12.5 24 43 69 106 150 209 350 550 825 1304 1815 2424 2913 3985 5189 6980 7491 10825 14983 20151 26286
PSI Quenched
Tempered

Medium
SAE 7 133,000 Carbon 13 25 44 71 110 154 215 360 570 840 1325 1825 2500 3000 4000 5300 7000 7500 11000 15500 21000 27000
PSI Alloy
Steel

Medium
SAE 8 150,000 Carbon 14 29 47 78 119 169 230 380 600 900 1430 1975 2650 3200 4400 5650 7600 8200 12000 17000 23000 29000
PSI Alloy
Steel

TORQUE VALUES: All figures are

Socket foot-pounds except those marked 16 33 54 84 125 180 250 400 640 970 1520 2130 2850 3450 4700 6100 8200 8800 13000 18000 24000 31000
Head Cap 160,000 Alloy
PSI Steel with an asterisk (*), those
Screw indicate inch-pounds.

Socket 9* 16* 30* 70* 140* 18 29 43 63 100 146

Set Screw 212,000 Alloy
PSI Steel

Machine Copper
Screw (CU) 63% 2* 3.3* 4.4* 6.4* 8* 16* 20* 65* 110* 17 27 37 49 78 104 160 215 325 400 595
Yellow 60,000 Zinc
Brass PSI (ZN) 37%

Copper
Silicone (CU) 96%
Bronze 70,000 Zinc 2.3* 3.7* 4.9* 7.2* 10* 19* 22* 70* 125* 20 30 41 53 88 117 180 250 365 450 655
Type “B” PSI (ZN) 2%
Silicon
(SI) 2%

STUDS
Use SAE 2, 5 or 8 values when grade is known,
with a nut of sufficient strength.

There is no difference in the above chart between the torque figures for fine or coarse threads. The torque figures for a finely-threaded
fastener as compared to a coarsely-threaded fastener of the same diameter may be slightly higher but not significant enough to note.

Courtesy of Petersen Publishing Company

SAFETY NOTICE
THERE ARE MANY VARYING FACTORS WHICH AFFECT TORQUE. THE FIGURES IN THIS
CHART ARE SAFE FIGURES FOR STANDARD TORQUE APPLICATIONS ONLY.

C-5
 C
Torque Conversion Char ts
In the International Metric System, there is a term for “force” called the “Newton,” which is defined as “the force necessary to move one
kilogram one meter per second.” Therefore, with torque being “Force X Length,” the International Metric System measure torque in “Newton
metres” (N m).
From ft lb to N m From N m to ft lb
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
ft lb Nm Nm Nm Nm Nm Nm Nm Nm Nm Nm Nm ft lb ft lb ft lb ft lb ft lb ft lb ft lb ft lb ft lb ft lb
0 0 1.36 2.71 4.07 5.42 6.78 8.13 9.49 10.84 12.20 0 0 .74 1.48 2.21 2.95 3.69 4.43 5.16 5.90 6.64
10 13.56 14.91 16.27 17.62 18.98 20.33 21.69 23.05 24.40 25.76 10 7.38 8.11 8.85 9.59 10.33 11.06 11.80 12.54 13.28 14.01
20 27.11 28.47 29.83 31.18 32.54 33.89 35.25 36.61 37.97 39.32 20 14.75 15.49 16.23 16.96 17.70 18.44 19.18 19.91 20.65 21.39
30 40.67 42.02 43.38 44.73 46.09 47.45 48.80 50.16 51.51 52.87 30 22.13 22.86 23.60 24.34 25.08 25.81 26.55 27.99 28.03 28.76
40 54.22 55.58 56.94 58.29 59.65 61.00 62.36 63.71 65.07 66.42 40 29.50 30.24 30.98 31.72 32.45 33.19 33.93 34.67 35.40 36.14
50 67.78 69.14 70.49 71.85 73.20 74.56 75.91 77.27 78.62 79.98 50 36.88 37.62 38.35 39.09 39.83 40.57 41.30 42.04 42.78 43.52
60 81.33 82.69 84.05 85.40 86.76 88.11 89.47 90.83 92.18 93.54 60 44.25 44.99 45.73 46.47 47.20 47.94 48.68 49.42 50.15 50.89
70 94.89 96.25 97.60 98.96 100.31 101.67 103.03 104.38 105.74 107.09 70 51.63 52.37 53.10 53.84 54.58 55.32 56.05 56.79 57.53 58.27
80 108.45 109.80 111.16 112.51 113.87 115.23 116.58 117.94 119.29 120.65 80 59.00 59.74 60.48 61.22 61.96 62.69 63.43 64.17 64.91 65.64
90 122.00 123.36 124.72 126.07 127.43 128.78 130.14 131.49 132.85 134.20 90 66.38 67.12 67.86 68.59 69.33 70.07 70.81 71.54 72.28 73.02
100 135.56 100 73.76
ft lb X 1.3558 = N m 1 N m = 0.73756 ft lb

From in lb to N m From N m to in lb
Tor que Conversion Char ts

0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
in lb Nm Nm Nm Nm Nm Nm Nm Nm Nm Nm Nm in lb in lb in lb in lb in lb in lb in lb in lb in lb in lb
0 0 .113 .226 .339 .452 .565 .678 .791 .904 1.02 0 0 8.85 17.70 26.55 35.40 44.25 53.10 61.95 70.81 79.66
10 1.13 1.24 1.36 1.47 1.58 1.70 1.81 1.92 2.03 2.15 10 88.51 97.36 106.21 115.06 123.91 132.76 141.61 150.46 159.31 168.16
20 2.26 2.37 2.49 2.60 2.71 2.83 2.94 3.05 3.16 3.28 20 177.01 185.86 194.72 203.57 212.42 221.27 230.12 238.98 247.82 256.67
30 3.39 3.50 3.62 3.73 3.84 3.96 4.07 4.18 4.29 4.41 30 265.52 274.38 283.22 292.07 300.92 309.77 318.62 327.48 336.33 345.18
40 4.52 4.63 4.75 4.86 4.97 5.09 5.20 5.31 5.42 5.54 40 354.03 362.88 371.73 380.58 389.43 398.28 407.13 415.98 424.83 433.68
50 5.65 5.76 5.88 5.99 6.10 6.22 6.33 6.44 6.55 6.67 50 442.53 451.36 460.24 469.09 477.94 486.79 495.64 504.49 513.34 522.19
60 6.78 6.89 7.01 7.12 7.23 7.35 7.46 7.57 7.68 7.80 60 531.04 539.89 548.74 557.59 566.44 575.30 584.15 592.10 601.85 610.70
70 7.91 8.02 8.14 8.25 8.36 8.48 8.59 8.70 8.81 8.93 70 619.55 628.40 637.25 646.10 654.95 663.80 672.65 681.50 690.35 699.20
80 9.04 9.15 9.27 9.38 9.49 9.61 9.72 9.83 9.94 10.06 80 708.06 716.91 725.76 734.61 743.46 752.31 761.16 770.01 778.86 787.71
90 10.17 10.28 10.40 10.51 10.62 10.74 10.85 10.96 11.07 11.19 90 796.56 805.41 814.26 823.12 831.97 840.82 849.67 858.52 867.37 876.22
100 11.30 100 885.07
in lb X .1130 = N m N m X 8.8507 = in lb

From in oz to N m From N m to in oz
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
in oz Nm Nm Nm Nm Nm Nm Nm Nm Nm Nm Nm in oz in oz in oz in oz in oz in oz in oz in oz in oz in oz
0 0 .007 .014 .021 .028 .035 .042 .049 .056 .064 0 0 1.42 2.83 4.25 5.66 7.08 8.50 9.91 11.33 12.74
10 .071 .078 .085 .092 .098 .106 .113 .120 .127 .134 .1 14.16 15.58 16.99 18.41 19.83 21.24 22.66 24.07 25.49 26.91
20 .141 .148 .155 .162 .169 .177 .184 .191 .198 .205 .2 28.32 29.74 31.15 32.57 33.99 35.40 36.82 38.23 39.65 41.07
30 .212 .219 .226 .232 .240 .247 .254 .261 .268 .275 .3 42.48 43.90 45.32 46.73 48.15 49.56 50.98 52.40 53.81 55.23
40 .282 .289 .297 .304 .312 .318 .325 .332 .339 .346 .4 56.64 58.06 59.48 60.89 62.31 63.72 65.14 66.56 67.97 69.39
50 .353 .360 .367 .374 .381 .388 .395 .402 .409 .417 .5 70.81 72.22 73.64 75.05 76.47 77.89 79.30 80.72 82.13 83.55
60 .424 .431 .438 .445 .452 .459 .466 .473 .480 .487 .6 84.97 86.41 87.80 89.21 90.63 92.05 93.46 94.88 96.30 97.71
70 .494 .501 .508 .515 .522 .530 .537 .544 .551 .558 .7 99.13 100.54 101.96 103.38 104.79 106.21 107.62 109.04 110.46 111.87
80 .565 .572 .579 .586 .593 .600 .607 .624 .621 .628 .8 113.29 114.70 116.12 117.54 118.95 120.37 121.79 123.20 124.62 126.03
90 .635 .642 .650 .657 .664 .671 .678 .685 .692 .699 .9 127.45 128.87 130.28 131.70 133.11 134.53 135.95 137.36 138.78 140.19
100 .706 1.0 141.61
in oz X .00706 = N m .01 N m X 141.6112 = .01 in oz

From m kg to N m From N m to m kg
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
m kg Nm Nm Nm Nm Nm Nm Nm Nm Nm Nm Nm m kg m kg m kg m kg m kg m kg m kg m kg m kg m kg
0 0 9.81 19.61 29.42 39.23 49.03 58.84 68.65 78.45 88.26 0 0 .102 .204 .306 .408 .510 .611 .714 .816 .918
10 98.07 107.87 117.68 127.49 137.30 147.10 156.90 166.71 176.52 186.33 10 1.020 1.122 1.224 1.326 1.428 1.530 1.632 1.733 1.835 1.937
20 196.13 205.94 215.75 225.55 235.36 245.17 254.98 264.78 274.59 284.40 20 2.039 2.141 2.243 2.345 2.447 2.549 2.651 2.753 2.855 2.957
30 294.20 304.00 313.81 323.62 333.43 343.23 353.04 362.85 372.65 382.46 30 3.059 3.161 3.263 3.365 3.467 3.569 3.671 3.773 3.875 3.977
40 392.27 402.07 411.88 421.69 431.49 441.30 451.11 460.91 470.72 480.53 40 4.079 4.181 4.283 4.385 4.487 4.589 4.691 4.793 4.895 4.997
50 490.33 500.14 509.95 519.75 529.56 539.37 549.17 558.98 568.79 578.60 50 5.099 5.200 5.302 5.404 5.506 5.608 5.710 5.812 5.914 6.016
60 588.40 598.21 608.01 617.82 627.63 637.43 647.24 657.05 666.86 676.66 60 6.118 6.220 6.322 6.424 6.526 6.628 6.730 6.832 6.934 7.036
70 686.47 696.27 706.08 715.89 725.70 735.50 745.30 755.11 764.92 774.73 70 7.138 7.240 7.342 7.444 7.546 7.648 7.750 7.852 7.954 8.056
80 784.53 794.34 804.15 813.95 823.76 833.57 843.37 853.18 862.99 872.79 80 8.158 8.260 8.362 8.464 8.565 8.667 8.769 8.871 8.973 9.075
90 882.60 892.41 902.21 912.02 921.83 931.63 941.44 951.25 961.05 970.86 90 9.177 9.279 9.381 9.483 9.585 9.687 9.789 9.891 9.993 10.095
100 980.67 100 10.197
m kg (or m kp) = 9.80665 N m N m X .10197 = m kg (or m kp)

C-6
 C
Tor que Conversion Char ts
NOTE: A meter kilogram is equal to a meter kilopond. (1m kg = 1m kp)

From in lb to in oz From in oz to in lb
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
in lb in oz in oz in oz in oz in oz in oz in oz in oz in oz in oz in oz in lb in lb in lb in lb in lb in lb in lb in lb in lb in lb
0 0 16 32 48 64 80 96 112 128 144 0 0 .063 .125 .188 .250 .313 .375 .438 .500 .563
10 160 176 192 208 224 240 256 272 288 304 10 .625 .688 .750 .813 .875 .938 1.000 1.063 1.125 1.188
20 320 336 352 368 384 400 416 432 448 464 20 1.250 1.313 1.375 1.438 1.500 1.563 1.625 1.688 1.750 1.813
30 480 496 512 528 544 560 576 592 608 624 30 1.875 1.938 2.000 2.063 2.125 2.188 2.250 2.313 2.375 2.438
40 640 656 672 688 704 720 736 752 768 784 40 2.500 2.563 2.625 2.688 2.750 2.813 2.875 2.938 3.000 3.063
50 800 816 832 848 864 880 896 912 928 944 50 3.125 3.188 3.250 3.313 3.375 3.438 3.500 3.563 3.625 3.688
60 960 976 992 1008 1024 1040 1056 1072 1088 1104 60 3.750 3.813 3.875 3.938 4.000 4.063 4.125 4.188 4.250 4.313
70 1120 1236 1152 1168 1184 1200 1216 1232 1248 1264 70 4.375 4.438 4.500 4.563 4.625 4.688 4.750 4.813 4.875 4.938
80 1280 1296 1312 1328 1344 1360 1376 1392 1408 1424 80 5.000 5.063 5.125 5.188 5.250 5.313 5.375 5.438 5.500 5.563
90 1440 1456 1472 1488 1504 1520 1536 1552 1568 1584 90 5.625 5.688 5.750 5.813 5.875 5.938 6.000 6.063 6.125 6.188
100 1600 100 6.250
in lb X 16 = in oz in oz ÷ 16 = in lb

From ft lb to in lb From in lb to ft lb

Tor que Conversion Char ts

0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
ft lb in lb in lb in lb in lb in lb in lb in lb in lb in lb in lb in lb ft lb ft lb ft lb ft lb ft lb ft lb ft lb ft lb ft lb ft lb
0 0 12 24 36 48 60 72 84 96 108 0 0 .083 .167 .250 .333 .417 .500 .583 .667 .750
10 120 132 144 156 168 180 192 204 216 228 10 .833 .917 1.000 1.083 1.167 1.250 1.333 1.417 1.500 1.583
20 240 252 264 276 288 300 312 324 336 348 20 1.667 1.750 1.833 1.917 2.000 2.083 2.167 2.250 2.333 2.417
30 360 372 384 396 408 420 432 444 456 468 30 2.500 2.583 2.667 2.750 2.833 2.917 3.000 3.083 3.167 3.250
40 480 492 504 516 528 540 552 564 576 588 40 3.333 3.417 3.500 3.583 3.667 3.750 3.833 3.917 4.000 4.083
50 600 612 624 636 648 660 672 684 696 708 50 4.167 4.250 4.333 4.417 4.500 4.583 4.667 4.750 4.833 4.917
60 720 732 744 756 768 780 792 804 816 828 60 5.000 5.083 5.167 5.250 5.333 5.417 5.500 5.583 5.667 5.750
70 840 852 864 876 888 900 912 924 936 948 70 5.833 5.917 6.000 6.083 6.167 6.250 6.333 6.417 6.500 6.583
80 960 972 984 996 1008 1020 1032 1044 1056 1068 80 6.667 6.750 6.833 6.917 7.000 7.083 7.167 7.250 7.333 7.417
90 1080 1092 1104 1116 1128 1140 1152 1164 1176 1188 90 7.500 7.583 7.667 7.750 7.833 7.917 8.000 8.083 8.167 8.250
100 1200 100 8.333
ft lb X 12 = in lb in lb ÷ 12 = ft lb

From in lb to cm kg From cm kg to in lb
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
in lb cm kg cm kg cm kg cm kg cm kg cm kg cm kg cm kg cm kg cm kg cm kg in lb in lb in lb in lb in lb in lb in lb in lb in lb in lb
0 0 1.152 2.304 3.456 4.608 5.760 6.912 8.064 9.217 10.36 0 0 .868 1.735 2.603 3.471 4.339 5.206 6.074 6.942 7.809
10 11.52 12.67 13.83 14.97 16.13 17.28 18.43 19.59 20.74 21.89 10 8.677 9.545 10.412 11.280 12.148 13.016 13.883 14.751 15.619 16.486
20 23.04 24.19 25.35 26.49 27.65 28.80 29.96 31.07 32.26 33.41 20 17.354 18.222 19.089 19.957 20.825 21.693 22.560 23.428 24.296 25.163
30 34.56 35.71 36.87 38.02 39.17 40.32 41.47 42.62 43.77 44.93 30 26.031 26.899 27.766 28.634 29.502 30.370 31.237 32.105 32.973 33.840
40 46.09 47.23 48.39 49.54 50.69 51.85 52.99 54.14 55.29 56.45 40 34.708 35.576 36.443 37.311 38.179 39.047 39.914 40.782 41.650 42.517
50 57.61 58.75 59.90 61.06 62.21 63.37 64.51 65.66 66.81 67.96 50 43.385 44.253 45.120 45.988 46.856 47.724 48.591 49.459 50.327 51.194
60 69.13 70.27 71.42 72.57 73.73 74.89 76.03 77.18 78.33 79.49 60 52.062 52.930 53.797 54.665 55.533 56.401 57.268 58.136 59.004 59.871
70 80.65 81.79 82.94 84.05 85.21 86.41 87.58 88.75 89.91 91.00 70 60.739 61.607 62.474 63.342 64.010 65.078 65.945 66.813 67.681 68.548
80 92.17 93.32 94.49 95.66 96.83 97.93 99.08 100.2 101.4 102.6 80 69.416 70.284 71.151 72.019 72.887 73.754 74.622 75.490 76.358 77.225
90 103.7 104.9 106.1 107.2 108.3 109.5 110.7 111.8 112.9 114.1 90 78.093 78.961 79.828 80.670 81.564 82.432 83.299 84.167 85.035 85.902
100 115.2 100 86.770
in lb X 1.152 = cm kg cm kg X .8677 = in lb

From ft lb to m kg From m kg to ft lb
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9
ft lb m kg m kg m kg m kg m kg m kg m kg m kg m kg m kg m kg ft lb ft lb ft lb ft lb ft lb ft lb ft lb ft lb ft lb ft lb
0 0 .138 .276 .415 .553 .691 .830 .968 1.106 1.245 0 0 7.23 14.47 21.70 28.93 36.17 43.40 50.63 57.86 65.10
10 1.383 1.521 1.660 1.798 1.936 2.074 2.212 2.351 2.489 2.628 10 72.4 79.6 86.8 94.0 101.3 108.5 115.7 123.0 130.2 137.4
20 2.766 2.904 3.043 3.181 3.319 3.457 3.596 3.734 3.872 4.011 20 144.7 151.9 159.1 166.4 173.6 180.8 188.1 195.3 202.5 209.8
30 4.149 4.287 4.426 4.564 4.702 4.840 4.979 5.117 5.255 5.394 30 217.0 224.2 231.5 238.7 245.9 253.2 260.4 267.6 274.9 284.1
40 5.532 5.670 5.809 5.947 6.085 6.223 6.362 6.500 6.638 6.777 40 289.3 296.6 303.9 311.0 318.3 325.5 332.7 340.0 347.2 354.4
50 6.915 7.053 7.191 7.330 7.468 7.606 7.745 7.883 8.021 8.159 50 361.7 368.9 376.1 383.3 390.6 397.8 405.0 412.3 419.5 426.7
60 8.298 8.436 8.574 8.713 8.851 8.989 9.128 9.266 9.404 9.543 60 434.0 441.2 448.4 455.7 462.9 470.1 477.4 484.6 491.8 499.1
70 9.681 9.819 9.957 10.09 10.23 10.37 10.51 10.65 10.79 10.92 70 506.3 513.5 520.8 528.0 535.2 542.5 549.7 556.9 564.2 571.4
80 11.06 11.20 11.34 11.48 11.62 11.75 11.89 12.03 12.17 12.31 80 578.6 585.9 593.1 600.3 607.6 614.8 622.0 629.3 636.5 643.7
90 12.45 12.59 12.73 12.86 13.00 13.14 13.28 13.42 13.55 13.69 90 651.0 658.2 665.4 672.7 679.9 687.1 694.4 701.6 708.8 716.1
100 13.83 100 723.3
ft lb X .1383 = m kg m kg X 7.233 = ft lb

C-7
 D
Merchandising Display Pr ogram
95-900 *
Merchandising Like You’ve Never Seen It Before . . .
Introducing the Armstrong Industrial Hand Tools Display Board Program—the most innovative
and dynamic hand tool display system in the industry. Designed to enhance the awareness of
Armstrong Hand Tools, this one-of-a-kind program will improve tool control and inventory
turns while providing flexibility for customizing your own board.
All boards utilize a universal “chassis” that is 23" x 29" and has 1/2" on center pin holes. Our
tool board system allows you to stack or position boards side-by-side to create a display with
impact. Plan-o-grammed overlays, featuring new graphics to include the Armstrong “strong
arm” icon, make setup simple and provide the opportunity to update boards regularly at a
minimum cost.
Mer chandising Display Pr ogram

Universal Merchandiser

95-915 95-920 95-921

1/4" Drive Sockets and Drive Tools 3/8" Drive Sockets and Drive Tools 1/4" & 3/8" Dr Industrial Finish
Sockets and Tools

95-925 95-926 95-927

1/2" Drive Industrial Finish 1/2" Drive Sockets 1/2" Drive Tools
Sockets and Tools

D-1
 D
Merchandising Display Pr ogram
95-928 95-929 95-930

Mer chandising Display Pr ogram

3/8" and 1/2" Drive Metric Sockets 3/4" Drive Sockets and Drive Tools Combination Wrenches

95-931 95-932 95-934 *

Adjustable Wrenches Metric Combination Wrenches Open End Wrenches

95-935* 95-936 * 95-937 *

Specialty Wrenches Industrial Finish Pipe Wrenches

Combination Wrenches
* Board includes generic overlay, not preprinted.

D-2
 D
Merchandising Display Pr ogram
95-938 95-940 95-941 *
Mer chandising Display Pr ogram

Torque Wrenches Soft Face Hammers and Tips Hammers

95-945 95-950 95-955

Punches and Chisels C-Clamps Plain Handle Screwdrivers

95-956 * 95-960

Cushion Grip Screwdrivers, Cushion Grip Pliers

Nut Drivers
* Board includes generic overlay, not preprinted.

D-3
 D
Merchandising Display Pr ogram
10-923 EXTENSION 6 1 11-708 1/8" HEXDRVR SKT 1 18-216 1/2" 6PT DEEP THIN PWR 1
95-915 10-925 EXTENSION 14 1 11-710 5/32" HEXDRVR SKT 1 18-921 2" PWR EXTENSION 1
10-929 FLEX EXTNSION 6 1 11-711 3/16" HEXDRVR SKT 1 18-923 6" PWR EXTENSION 1
1/4" Drive Sockets & Drive Tools 10-935 SPEEDER 15-3/4 1 11-712 7/32" HEXDRVR SKT 1 18-972 4-3/4" BLACK RATCHET 1
10-938 T-HANDLE 1 11-713 1/4" HEXDRVR SKT 1 3/8" DRIVE
Product Description Qty
10-943 PLASTIC HANDLE DRIVER 1 11-714 5/16" HEXDRVR SKT 1 19-608 1/4" 6PT PWR SKT 1
10-004 1/8" 6PT STD SKT 1 10-947 UNIVERSAL JOINT 1 11-715 3/8" HEXDRVR SKT 1 19-610 5/16" 6PT PWR SKT 1
10-005 5/32" 6PT STD SKT 1 10-952 ADAPTER 3/8 MALE 1 11-802 1/4" SCREWDRVR SKT 1 19-612 3/8" 6PT PWR SKT 1
10-006 3/16" 6PT STD SKT 1 10-972 RATCHET 4-3/4 1 11-803 5/16" SCREWDRVR SKT 1 19-614 7/16" 6PT PWR SKT 1
10-007 7/32" 6PT STD SKT 1 11-805 3/8" SCREWDRVR SKT 1 19-616 1/2" 6PT PWR SKT 1
10-008 1/4" 6PT STD SKT 1 11-821 #1 SCREWDRVR SKT 1 19-618 9/16" 6PT PWR SKT 1
10-009 9/32" 6PT STD SKT 1 11-822 #2 SCREWDRVR SKT 1 19-620 5/8" 6PT PWR SKT 1
10-010 5/16" 6PT STD SKT 1 11-825 #3 SCREWDRVR SKT 1 19-622 11/16" 6PT PWR SKT 1
10-011
10-012
11/32" 6PT STD SKT
3/8" 6PT STD SKT
1
1
95-920 11-828
11-870
#4 SCREWDRVR SKT
T10 STD TORXDRVR SKT
1
1
19-624 3/4" 6PT PWR SKT
19-080 5/16" 6PT MAG PWR SKT
1
1
10-014 7/16" 6PT STD SKT 1 3/8" Drive Sockets & Drive Tools 11-872 T15 STD TORXDRVR SKT 1 19-082 3/8" 6PT MAG PWR SKT 1
10-016 1/2" 6PT STD SKT 1 11-874 T20 STD TORXDRVR SKT 1 19-084 7/16" 6PT MAG PWR SKT 1
10-018 9/16" 6PT STD SKT 1 Product Description Qty 11-876 T25 STD TORXDRVR SKT 1 19-086 1/2" 6PT MAG PWR SKT 1
10-106 3/16" 12PT STD SKT 1 11-008 1/4" 6PT SKT 1 11-878 T27 STD TORXDRVR SKT 1 19-088 9/16" 6PT MAG PWR SKT 1
10-107 7/32" 12PT STD SKT 1 11-010 5/16" 6PT SKT 1 11-880 T30 STD TORXDRVR SKT 1 19-108 1/4" 12PT THIN WALL PWR 1
10-108 1/4" 12PT STD SKT 1 11-882 T40 STD TORXDRVR SKT 1

Mer chandising Display Pr ogram

11-012 3/8" 6PT SKT 1 19-110 5/16" 12PT THIN WALL PWR 1
10-109 9/32" 12PT STD SKT 1 11-014 7/16" 6PT SKT 1 11-884 T45 STD TORXDRVR SKT 1 19-112 3/8" 12PT THIN WALL PWR 1
10-110 5/16" 12PT STD SKT 1 11-016 1/2" 6PT SKT 1 11-886 T50 STD TORXDRVR SKT 1 19-114 7/16" 12PT THIN WALL PWR 1
10-111 11/32" 12PT STD SKT 1 11-018 9/16" 6PT SKT 1 11-888 T55 STD TORXDRVR SKT 1 19-116 1/2" 12PT THIN WALL PWR 1
10-112 3/8" 12PT STD SKT 1 11-020 5/8" 6PT SKT 1 11-915 ROUND HD RATCHET 7-1/2 1 19-118 9/16" 12PT THIN WALL PWR 1
10-114 7/16" 12PT STD SKT 1 11-022 11/16" 6PT SKT 1 11-918 HINGE HANDLE 8-1/2 1 19-120 5/8" 12PT THIN WALL PWR 1
10-116 1/2" 12PT STD SKT 1 11-024 3/4" 6PT SKT 1 11-921 1-3/4" EXTENSION 1 19-122 11/16" 12PT THIN WALL PWR 1
10-118 9/16" 12PT STD SKT 1 11-026 13/16" 6PT SKT 1 11-922 3" EXTENSION 1 19-124 3/4" 12PT THIN WALL PWR 1
10-204 1/8" 6PT DEEP SKT 1 11-028 7/8" 6PT SKT 1 11-923 6" EXTENSION 1 19-126 13/16" 12PT THIN WALL PWR 1
10-205 5/32" 6PT DEEP SKT 1 11-030 15/16" 6PT SKT 1 11-925 8" EXTENSION 1 19-128 7/8" 12PT THIN WALL PWR 1
10-206 3/16" 6PT DEEP SKT 1 11-032 1" 6PT SKT 1 11-927 12" EXTENSION 1 19-130 15/16" 12PT THIN WALL PWR 1
10-207 7/32" 6PT DEEP SKT 1 11-108 1/4" 12PT SKT 1 11-929 FLEX EXTENSION 7 1 19-132 1" 12PT THIN WALL PWR 1
10-208 1/4" 6PT DEEP SKT 1 11-110 5/16" 12PT SKT 1 11-935 SPEEDER 16-1/2 1 19-708 1/4" 6PT DEEP PWR SKT 1
10-209 9/32" 6PT DEEP SKT 1 11-112 3/8" 12PT SKT 1 11-938 T-HANDLE 1 19-710 5/16" 6PT DEEP PWR SKT 1
10-210 5/16" 6PT DEEP SKT 1 11-114 7/16" 12PT SKT 1 11-943 PLASTIC HANDL DRIVR 1 19-712 3/8" 6PT DEEP PWR SKT 1
10-211 11/32" 6PT DEEP SKT 1 11-116 1/2" 12PT SKT 1 11-947 UNIVERSAL JOINT 1 19-714 7/16" 6PT DEEP PWR SKT 1
10-212 3/8" 6PT DEEP SKT 1 11-118 9/16" 12PT SKT 1 11-951 ADAPTER 1/4 MALE 1 19-716 1/2" 6PT DEEP PWR SKT 1
10-214 7/16" 6PT DEEP SKT 1 11-120 5/8" 12PT SKT 1 11-952 ADAPTER 1/2 MALE 1 19-718 9/16" 6PT DEEP PWR SKT 1
10-216 1/2" 6PT DEEP SKT 1 11-122 11/16" 12PT SKT 1 11-972 RATCHET 7-3/8 1 19-720 5/8" 6PT DEEP PWR SKT 1
10-218 9/16" 6PT DEEP SKT 1 11-124 3/4" 12PT SKT 1 11-973 RATCHET 10-1/2 1 19-722 11/16" 6PT DEEP PWR SKT 1
10-306 3/16" 12PT DEEP SKT 1 11-126 13/16" 12PT SKT 1 11-974 FLEX HD RATCHET 9-1/2 1 19-724 3/4" 6PT DEEP PWR SKT 1
10-307 7/32" 12PT DEEP SKT 1 11-128 7/8" 12PT SKT 1 11-978 ERGO RATCHET 8-3/8 1 19-918 HINGE HDL 8-1/2 1
10-308 1/4" 12PT DEEP SKT 1 11-130 15/16" 12PT SKT 1 19-922 PWR EXTNSION 3 1
10-309 9/32" 12PT DEEP SKT 1 11-132 1" 12PT SKT 1 19-923 PWR EXTNSION 6 1
10-310 5/16" 12PT DEEP SKT 1 11-208 1/4" 6PT DEEP SKT 1 19-947 POWR UNIVRSL JOINT 1
10-311 11/32" 12PT DEEP SKT 1 11-210 5/16" 6PT DEEP SKT 1 19-952 ADAPTER 1/2 MALE 1
10-312
10-314
3/8" 12PT DEEP SKT
7/16" 12PT DEEP SKT
1
1
11-212 3/8" 6PT DEEP SKT 1 95-921 19-972 RATCHET 7-3/8 1
11-214 7/16" 6PT DEEP SKT 1
10-316 1/2" 12PT DEEP SKT 1 11-216 1/2" 6PT DEEP SKT 1 1/4" & 3/8" Drive Industrial Finish
10-318 9/16" 12PT DEEP SKT 1 11-218 9/16" 6PT DEEP SKT 1
10-703 050" STD HEXDRVR SKT 1 Sockets & Drive Tools
11-220 5/8" 6PT DEEP SKT 1
10-704
10-705
1/16" STD HEXDRVR SKT
5/64" STD HEXDRVR SKT
1
1
11-222 11/16" 6PT DEEP SKT 1 Product Description Qty 95-925
11-224 3/4" 6PT DEEP SKT 1 1/4" DRIVE
10-706 3/32" STD HEXDRVR SKT 1 11-226 13/16" 6PT DEEP SKT 1 1/2" Drive Industrial Finish Sockets
18-006 3/16" 6PT THIN PWR SKT 1
10-707 7/64" STD HEXDRVR SKT 1 11-228 7/8" 6PT DEEP SKT 1
10-708 1/8" STD HEXDRVR SKT 1
18-007 7/32" 6PT THIN PWR SKT 1 and Drive Tools
11-230 15/16" 6PT DEEP SKT 1 18-008 1/4" 6PT THIN PWR SKT 1
10-709 9/64" STD HEXDRVR SKT 1 11-232 1" 6PT DEEP SKT 1 Product Description Qty
18-009 9/32" 6PT THIN PWR SKT 1
10-710 5/32" STD HEXDRVR SKT 1 11-308 1/4" 12PT DEEP SKT 1 18-010 5/16" 6PT THIN PWR SKT 1 20-012 3/8" 6PT IMPACT SKT 1
10-711 3/16" STD HEXDRVR SKT 1 11-310 5/16" 12PT DEEP SKT 1 18-011 11/32" 6PT THIN PWR SKT 1 20-014 7/16" 6PT IMPACT SKT 1
10-712 7/32" STD HEXDRVR SKT 1 11-312 3/8" 12PT DEEP SKT 1 18-012 3/8" 6PT THIN PWR SKT 1 20-016 1/2" 6PT IMPACT SKT 1
10-713 1/4" STD HEXDRVR SKT 1 11-314 7/16" 12PT DEEP SKT 1 18-014 7/16" 6PT THIN PWR SKT 1 20-018 9/16" 6PT IMPACT SKT 1
10-714 5/16" STD HEXDRVR SKT 1 11-316 1/2" 12PT DEEP SKT 1 18-016 1/2" 6PT THIN PWR SKT 1 20-020 5/8" 6PT IMPACT SKT 1
10-801 1/4" SCREWDRVR SKT 1 11-318 9/16" 12PT DEEP SKT 1 18-076 3/16" 6PT MAG PWR SKT 1 20-022 11/16" 6PT IMPACT SKT 1
10-802 3/16" SCREWDRVR SKT 1 11-320 5/8" 12PT DEEP SKT 1 18-078 1/4" 6PT MAG PWR SKT 1 20-024 3/4" 6PT IMPACT SKT 1
10-821 #1 TIP SCREWDRVR BIT 1 11-322 11/16" 12PT DEEP SKT 1 18-079 9/32" 6PT MAG PWR SKT 1 20-026 13/16" 6PT IMPACT SKT 1
10-822 #2 TIP SCREWDRVR BIT 1 11-324 3/4" 12PT DEEP SKT 1 18-080 5/16" 6PT MAG PWR SKT 1 20-028 7/8" 6PT IMPACT SKT 1
10-823 #3 TIP SCREWDRVR BIT 1 11-326 13/16" 12PT DEEP SKT 1 18-081 11/32" 6PT MAG PWR SKT 1 20-030 15/16" 6PT IMPACT SKT 1
10-868 T8 TORXDRVR SKT 1 11-328 7/8" 12PT DEEP SKT 1 18-082 3/8" 6PT MAG PWR SKT 1 20-032 1" 6PT IMPACT SKT 1
10-870 T10 TORXDRVR SKT 1 11-330 15/16" 12PT DEEP SKT 1 18-084 7/16" 6PT MAG PWR SKT 1 20-034 1-1/16" 6PT IMPACT SKT 1
10-872 T15 TORXDRVR SKT 1 11-332 1" 12PT DEEP SKT 1 18-086 1/2" 6PT MAG PWR SKT 1 20-036 1-1/8" 6PT IMPACT SKT 1
10-874 T20 TORXDRVR SKT 1 11-512 3/8" 12PT FLEX SKT 1 18-206 3/16" 6PT DEEP THIN PWR 1 20-038 1-3/16" 6PT IMPACT SKT 1
10-876 T25 TORXDRVR SKT 1 11-514 7/16" 12PT FLEX SKT 1 18-208 1/4" 6PT DEEP THIN PWR 1 20-040 1-1/4" 6PT IMPACT SKT 1
10-878 T27 TORXDRVR SKT 1 11-516 1/2" 12PT FLEX SKT 1 18-209 9/32" 6PT DEEP THIN PWR 1 20-042 1-5/16" 6PT IMPACT SKT 1
10-880 T30 TORXDRVR SKT 1 11-518 9/16" 12PT FLEX SKT 1 18-210 5/16" 6PT DEEP THIN PWR 1 20-048 1-1/2" 6PT IMPACT SKT 1
10-918 HINGE HANDLE 5-3/4 1 11-520 5/8" 12PT FLEX SKT 1 18-211 11/32" 6PT DEEP THIN PWR 1 20-082 3/8" 6PT MAG PWR SKT 1
10-921 EXTENSION 2 1 11-522 11/16" 12PT FLEX SKT 1 18-212 3/8" 6PT DEEP THIN PWR 1 20-084 7/16" 6PT MAG PWR SKT 1
10-922 EXTENSION 3-1/2 1 11-524 3/4" 12PT FLEX SKT 1 18-214 7/16" 6PT DEEP THIN PWR 1 20-086 1/2" 6PT MAG PWR SKT 1

D-4
 D
Merchandising Display Pr ogram
20-088 9/16" 6PT MAG PWR SKT 1 12-128 7/8" 12PT SKT 1 1/2" DRIVE
20-112 3/8" 12PT THIN PWR 1 12-130 15/16" 12PT SKT 1 95-927 39-110 10MM 12PT SKT 1
20-114 7/16" 12PT THIN PWR 1 12-132 1" 12PT SKT 1 39-111 11MM 12PT SKT 1
20-116 1/2" 12PT THIN PWR 1 12-134 1-1/16" 12PT SKT 1 1/2" Drive Tools 39-112 12MM 12PT SKT 1
20-118 9/16" 12PT THIN PWR 1 12-136 1-1/8" 12PT SKT 1 39-113 13MM 12PT SKT 1
Product Description Qty
20-120 5/8" 12PT THIN PWR 1 12-138 1-3/16" 12PT SKT 1 39-114 14MM 12PT SKT 1
20-122 11/16" 12PT THIN PWR 1 12-140 1-1/4" 12PT SKT 1 12-915 ROUND HD RATCHET 10-1/2 1 39-115 15MM 12PT SKT 1
20-124 3/4" 12PT THIN PWR 1 12-142 1-5/16" 12PT SKT 1 12-917 HINGE HANDLE 12 1 39-116 16MM 12PT SKT 1
20-126 13/16" 12PT THIN PWR 1 12-148 1-1/2" 12PT SKT 1 12-918 HINGE HANDLE 17 1 39-117 17MM 12PT SKT 1
20-128 7/8" 12PT THIN PWR 1 12-212 3/8" 6PT DEEP SKT 1 12-921 EXTENSION 2 1 39-118 18MM 12PT SKT 1
20-130 15/16" 12PT THIN PWR 1 12-214 7/16" 6PT DEEP SKT 1 12-923 EXTENSION 5 1 39-119 19MM 12PT SKT 1
20-132 1" 12PT THIN PWR 1 12-216 1/2" 6PT DEEP SKT 1 12-924 EXTENSION 10 1 39-120 20MM 12PT SKT 1
20-134 1-1/16" 12PT THIN PWR 1 12-218 9/16" 6PT DEEP SKT 1 12-927 EXTENSION 20 1 39-121 21MM 12PT SKT 1
20-136 1-1/8" 12PT THIN PWR 1 12-220 5/8" 6PT DEEP SKT 1 12-935 SPEEDER 19 1 39-122 22MM 12PT SKT 1
20-140 1-1/4" 12PT THIN PWR 1 12-222 11/16" 6PT DEEP SKT 1 12-938 T-HANDLE 1 39-123 23MM 12PT SKT 1
20-142 1-5/16" 12PT THIN PWR 1 12-224 3/4" 6PT DEEP SKT 1 12-947 UNIVERSAL JOINT 1 39-124 24MM 12PT SKT 1
20-144 1-3/8" 12PT THIN PWR 1 12-226 13/16" 6PT DEEP SKT 1 12-951 ADAPTER 3/8 MALE 1 39-125 25MM 12PT SKT 1
20-146 1-7/16" 12PT THIN PWR 1 12-228 7/8" 6PT DEEP SKT 1 12-952 ADAPTER 3/4 MALE 1 39-126 26MM 12PT SKT 1
20-148 1-1/2" 12PT THIN PWR 1 12-230 15/16" 6PT DEEP SKT 1 12-972 RATCHET 10-1/2 1 39-127 27MM 12PT SKT 1
20-212 3/8" 6PT DEEP IMPCT 1 12-232 1" 6PT DEEP SKT 1 12-973 RATCHET 15 1 39-128 28MM 12PT SKT 1
20-214 7/16" 6PT DEEP IMPCT 1 12-234 1-1/16" 6PT DEEP SKT 1 12-974 FLX HD RATCH 14-1/4 1 39-129 29MM 12PT SKT 1
Mer chandising Display Pr ogram

20-216 1/2" 6PT DEEP IMPCT 1 12-236 1-1/8" 6PT DEEP SKT 1 39-130 30MM 12PT SKT 1
20-218 9/16" 6PT DEEP IMPCT 1 12-238 1-3/16" 6PT DEEP SKT 1 39-132 32MM 12PT SKT 1
20-220 5/8" 6PT DEEP IMPCT 1 12-240 1-1/4" 6PT DEEP SKT 1 39-136 36MM 12PT SKT 1
20-222 11/16" 6PT DEEP IMPCT 1 12-242 1-5/16" 6PT DEEP SKT 1 39-310 10MM 12PT DEEP SKT 1
20-224 3/4" 6PT DEEP IMPCT 1 12-248 1-1/2" 6PT DEEP SKT 1 95-928 39-311 11MM 12PT DEEP SKT 1
20-226 13/16" 6PT DEEP IMPCT 1 12-312 3/8" 12PT DEEP SKT 1 39-312 12MM 12PT DEEP SKT 1
20-228 7/8" 6PT DEEP IMPCT 1 12-314 7/16" 12PT DEEP SKT 1 3/8" & 1/2" Drive Metric Sockets 39-313 13MM 12PT DEEP SKT 1
20-230 15/16" 6PT DEEP IMPCT 1 12-316 1/2" 12PT DEEP SKT 1 39-314 14MM 12PT DEEP SKT 1
20-232 1" 6PT DEEP IMPCT 1 12-318 9/16" 12PT DEEP SKT 1 Product Description Qty 39-315 15MM 12PT DEEP SKT 1
20-234 1-1/16" 6PT DEEP IMPCT 1 12-320 5/8" 12PT DEEP SKT 1 3/8" DRIVE 39-316 16MM 12PT DEEP SKT 1
20-236 1-1/8" 6PT DEEP IMPCT 1 12-322 11/16" 12PT DEEP SKT 1 38-106 6MM 12PT SKT 1 39-317 17MM 12PT DEEP SKT 1
20-240 1-1/4" 6PT DEEP IMPCT 1 12-324 3/4" 12PT DEEP SKT 1 38-107 7MM 12PT SKT 1 39-318 18MM 12PT DEEP SKT 1
20-242 1-5/16" 6PT DEEP IMPCT 1 12-326 13/16" 12PT DEEP SKT 1 38-108 8MM 12PT SKT 1 39-319 19MM 12PT DEEP SKT 1
20-248 1-1/2" 6PT DEEP IMPCT 1 12-328 7/8" 12PT DEEP SKT 1 38-109 9MM 12PT SKT 1 39-320 20MM 12PT DEEP SKT 1
20-923 5" IMPACT EXTENSION 1 12-330 15/16" 12PT DEEP SKT 1 38-110 10MM 12PT SKT 1 39-321 21MM 12PT DEEP SKT 1
20-924 10" IMPACT EXTENSION 1 12-332 1" 12PT DEEP SKT 1 38-111 11MM 12PT SKT 1 39-322 22MM 12PT DEEP SKT 1
20-947 PWR UNIV JOINT 1 12-334 1-1/16" 12PT DEEP SKT 1 38-112 12MM 12PT SKT 1 39-323 23MM 12PT DEEP SKT 1
20-951 ADAPTER 3/8 MALE 1 12-336 1-1/8" 12PT DEEP SKT 1 38-113 13MM 12PT SKT 1 39-324 24MM 12PT DEEP SKT 1
20-952 ADAPTER 3/4 MALE 1 12-338 1-3/16" 12PT DEEP SKT 1 38-114 14MM 12PT SKT 1 39-325 25MM 12PT DEEP SKT 1
20-959 HEX SQUARE SHANK 1 12-340 1-1/4" 12PT DEEP SKT 1 38-115 15MM 12PT SKT 1 39-326 26MM 12PT DEEP SKT 1
20-972 10-1/2" RATCHET 1 12-342 1-5/16" 12PT DEEP SKT 1 38-116 16MM 12PT SKT 1 39-327 27MM 12PT DEEP SKT 1
12-348 1-1/2" 12PT DEEP SKT 1 38-117 17MM 12PT SKT 1 39-328 28MM 12PT DEEP SKT 1
12-713 1/4" HEXDRVR SKT 1 38-118 18MM 12PT SKT 1 39-329 29MM 12PT DEEP SKT 1
12-714 5/16" HEXDRVR SKT 1 38-119 19MM 12PT SKT 1 39-330 30MM 12PT DEEP SKT 1
12-715 3/8" HEXDRVR SKT 1 38-120 20MM 12PT SKT 1 39-332 32MM 12PT DEEP SKT 1
95-926 12-716
12-717
7/16" HEXDRVR SKT
1/2" HEXDRVR SKT
1
1
38-121 21MM 12PT SKT 1 39-711 6MM HEXDRVR SKT
39-713 8MM HEXDRVR SKT
1
1
38-122 22MM 12PT SKT 1
1/2" Drive Sockets 12-718 9/16" HEXDRVR SKT 1 38-306 6MM 12PT DEEP SKT 1 39-715 10MM HEXDRVR SKT 1
12-719 5/8" HEXDRVR SKT 1 38-307 7MM 12PT DEEP SKT 1 39-717 12MM HEXDRVR SKT 1
Product Description Qty 12-721 3/4" HEXDRVR SKT 1 38-308 8MM 12PT DEEP SKT 1 39-719 14MM HEXDRVR SKT 1
12-012 3/8" 6PT SKT 1 12-802 1/4" SCREWDRVR SKT 1 38-309 9MM 12PT DEEP SKT 1 39-722 17MM HEXDRVR SKT 1
12-014 7/16" 6PT SKT 1 12-803 5/16" SCREWDRVR SKT 1 38-310 10MM 12PT DEEP SKT 1 39-724 19MM HEXDRVR SKT 1
12-016 1/2" 6PT SKT 1 12-805 3/8" SCREWDRVR SKT 1 38-311 11MM 12PT DEEP SKT 1
12-018 9/16" 6PT SKT 1 12-821 #1 SCREWDRVR SKT 1 38-312 12MM 12PT DEEP SKT 1
12-020 5/8" 6PT SKT 1 12-822 #2 SCREWDRVR SKT 1 38-313 13MM 12PT DEEP SKT 1
12-022 11/16" 6PT SKT 1 12-825 #3 SCREWDRVR SKT 1 38-314 14MM 12PT DEEP SKT 1
12-024 3/4" 6PT SKT 1 12-828
12-878
#4 SCREWDRVR SKT
T27 TORXDRVR SKT
1
1
38-315 15MM 12PT DEEP SKT 1 95-929
12-026 13/16" 6PT SKT 1 38-316 16MM 12PT DEEP SKT 1
12-028 7/8" 16PT SKT 1 12-880 T30 TORXDRVR SKT 1 38-317 17MM 12PT DEEP SKT 1 3/4" Drive Sockets and Drive Tools
12-030 15/16" 6PT SKT 1 12-882 T40 TORXDRVR SKT 1 38-318 18MM 12PT DEEP SKT 1
12-032 1" 6PT SKT 1 12-884 T45 TORXDRVR SKT 1 38-319 19MM 12PT DEEP SKT 1 Product Description Qty
12-034 1-1/16" 6PT SKT 1 12-886 T50 TORXDRVR SKT 1 38-320 20MM 12PT DEEP SKT 1 13-124 3/4" 12PT SKT 1
12-036 1-1/8" 6PT SKT 1 12-888 T55 TORXDRVR SKT 1 38-321 21MM 12PT DEEP SKT 1 13-126 13/16" 12PT SKT 1
12-038 1-3/16" 6PT SKT 1 12-890 T60 TORXDRVR SKT 1 38-322 22MM 12PT DEEP SKT 1 13-128 7/8" 12PT SKT 1
12-040 1-1/4" 6PT SKT 1 38-705 3MM HEXDRVR SKT 1 13-130 15/16" 12PT SKT 1
12-042 1-5/16" 6PT SKT 1 38-707 4MM HEXDRVR SKT 1 13-132 1" 12PT SKT 1
12-048 1-1/2" 6PT SKT 1 38-709 5MM HEXDRVR SKT 1 13-134 1-1/16" 12PT SKT 1
12-112 3/8" 12PT SKT 1 38-711 6MM HEXDRVR SKT 1 13-136 1-1/8" 12PT SKT 1
12-114 7/16" 12PT SKT 1 38-712 7MM HEXDRVR SKT 1 13-138 1-3/16" 12PT SKT 1
12-116 1/2" 12PT SKT 1 38-713 8MM HEXDRVR SKT 1 13-140 1-1/4" 12PT SKT 1
12-118 9/16" 12PT SKT 1 38-714 9MM HEXDRVR SKT 1 13-142 1-5/16" 12PT SKT 1
12-120 5/8" 12PT SKT 1 38-715 10MM HEXDRVR SKT 1 13-144 1-3/8" 12PT SKT 1
12-122 11/16" 12PT SKT 1 13-146 1-7/16" 12PT SKT 1
12-124 3/4" 12PT SKT 1 13-148 1-1/2" 12PT SKT 1
12-126 13/16" 12PT SKT 1 13-150 1-9/16" 12PT SKT 1

D-5
 D
Merchandising Display Pr ogram
13-152 1-5/8" 12PT SKT 1
13-154 1-11/16" 12PT SKT 1 95-931 95-934 95-936
13-156 1-3/4" 12PT SKT 1
13-158 1-13/16" 12PT SKT 1 Adjustable Wrenches Open End Wrenches Industrial Finish Combination
13-160 1-7/8" 12PT SKT 1
Product Description Qty Product Description Qty Wrenches
13-164 2" 12PT SKT 1
13-328 7/8" 12PT DEEP SKT 1 28-404 4" CHROME 1 26-022 1/4 X 5/16 1 Product Description Qty
13-330 15/16" 12PT DEEP SKT 1 28-406 6" CHROME 1 26-034 5/16 X 3/8 1 30-108 1/4" 12PT SHORT 1
13-332 1" 12PT DEEP SKT 1 28-408 8" CHROME 1 26-043 3/8 X 7/16 1 30-110 5/16" 12PT SHORT 1
13-334 1-1/16" 12PT DEEP SKT 1 28-410 10" CHROME 1 26-046 3/8 X 1/2 1 30-112 3/8" 12PT SHORT 1
13-336 1-1/8" 12PT DEEP SKT 1 28-412 12" CHROME 1 26-058 7/16 X 1/2 1 30-114 7/16" 12PT SHORT 1
13-340 1-1/4" 12PT DEEP SKT 1 28-415 15" CHROME 1 26-064 7/16 X 9/16 1 30-116 1/2" 12PT SHORT 1
13-342 1-5/16" 12PT DEEP SKT 1 28-454 4" CUSHION GRIP 1 26-067 1/2 X 9/16 1 30-118 9/16" 12PT SHORT 1
13-344 1-3/8" 12PT DEEP SKT 1 28-456 6" CUSHION GRIP 1 26-079 9/16 X 5/8 1 30-120 5/8" 12PT SHORT 1
13-346 1-7/16" 12PT DEEP SKT 1 28-458 8" CUSHION GRIP 1 26-094 5/8 X 11/16 1 30-122 11/16" 12PT SHORT 1
13-348 1-1/2" 12PT DEEP SKT 1 28-460 10" CUSHION GRIP 1 26-097 5/8 X 3/4 1 30-124 3/4" 12PT SHORT 1
13-352 1-5/8" 12PT DEEP SKT 1 28-462 12" CUSHION GRIP 1 26-106 11/16 X 3/4 1 30-126 13/16" 12PT SHORT 1
13-918 22" HINGE HANDLE 1 34-404 4" BLACK 1 26-121 3/4 X 13/16 1 30-128 7/8" 12PT SHORT 1
13-922 5" EXTENSION 1 34-406 6" BLACK 1 26-124 3/4 X 7/8 1 30-130 15/16" 12PT SHORT 1
13-923 8" EXTENSION 1 34-408 8" BLACK 1 26-139 7/8 X 15/16 1 30-132 1" 12PT SHORT 1
34-410 10" BLACK 1 26-145 7/8 X 1-1/16 1

Mer chandising Display Pr ogram

13-925 15-1/2" EXTENSION 1 30-208 1/4" 12PT LONG 1
13-938 T-HANDLE 1 34-412 12" BLACK 1 26-151 15/16 X 1 1 30-210 5/16" 12PT LONG 1
13-947 UNIVERSAL JOINT 1 34-415 15" BLACK 1 26-163 1 X 1-1/8 1 30-211 11/32" 12PT LONG 1
13-951 ADAPTER 1/2 MALE 1 26-166 1-1/16 X 1-1/8 1 30-212 3/8" 12PT LONG 1
13-952 ADAPTER 1 MALE 1 26-169 1-1/16 X 1-1/4 1 30-214 7/16" 12PT LONG 1
13-972 19" RATCHET 1 26-172 1-1/8 X 1-1/4 1 30-216 1/2" 12PT LONG 1
30-218 9/16" 12PT LONG 1
95-932 30-220 5/8" 12PT LONG 1
30-222 11/16" 12PT LONG 1
Metric Combination Wrenches 30-224 3/4" 12PT LONG 1
95-930 Product Description Qty
95-935 30-226 13/16" 12PT LONG 1
30-228 7/8" 12PT LONG 1
Combination Wrenches 52-004 4MM 6PT SHORT 1 Specialty Wrenches 30-230 15/16" 12PT LONG 1
52-005 5MM 6PT SHORT 1 30-232 1" 12PT LONG 1
Product Description Qty 52-083 5.5MM 6PT SHORT 1 Product Description Qty 30-234 1-1/16" 12PT LONG 1
25-004 1/8" 6PT SHORT 1 52-006 6MM 6PT SHORT 1 26-643 3/8X7/16 12PT 15˚ BOX 1 30-236 1-1/8" 12PT LONG 1
25-005 5/32" 6PT SHORT 1 52-007 7MM 6PT SHORT 1 26-658 7/16X1/2 12PT 15˚ BOX 1 30-240 1-1/4" 12PT LONG 1
25-006 3/16" 6PT SHORT 1 52-008 8MM 6PT SHORT 1 26-667 1/2X9/16 12PT 15˚ BOX 1
25-007 7/32" 6PT SHORT 1 52-109 9MM 12PT SHORT 1 26-679 9/16X5/8 12PT 15˚ BOX 1
25-108 1/4" 12PT SHORT 1 52-110 10MM 12PT SHORT 1 26-697 5/8X3/4 12PT 15˚ BOX 1
25-110 5/16" 12PT SHORT 1 52-111 11MM 12PT SHORT 1 26-706 11/16X3/4 12PT 15˚ BOX 1
25-111 11/32" 12PT SHORT 1 52-112
52-113
12MM 12PT SHORT
13MM 12PT SHORT
1
1
26-724
26-751
3/4X7/8 12PT 15˚ BOX
13/16X7/8 12PT 15˚ BOX
1
1
95-937
25-112 3/8" 12PT SHORT 1
25-114 7/16" 12PT SHORT 1 52-114 14MM 12PT SHORT 1 27-343 3/8X7/16 12PT 45˚ BOX 1 Pipe Wrenches
25-116 1/2" 12PT SHORT 1 52-115 15MM 12PT SHORT 1 27-358 7/16X1/2 12PT 45˚ BOX 1
25-118 9/16" 12PT SHORT 1 52-116 16MM 12PT SHORT 1 27-367 1/2X9/16 12PT 45˚ BOX 1 Product Description Qty
25-120 5/8" 12PT SHORT 1 52-117 17MM 12PT SHORT 1 27-379 9/16X5/8 12PT 45˚ BOX 1 73-006 6" STRAIGHT 1
25-122 11/16" 12PT SHORT 1 52-118 18MM 12PT SHORT 1 27-394 5/8X11/16 12PT 45˚ BOX 1 73-008 8" STRAIGHT 1
25-124 3/4" 12PT SHORT 1 52-119 19MM 12PT SHORT 1 27-397 5/8X3/4 12PT 45˚ BOX 1 73-010 10" STRAIGHT 1
25-126 13/16" 12PT SHORT 1 52-206 6MM 12PT LONG 1 27-424 3/4X7/8 12PT 45˚ BOX 1 73-012 12" STRAIGHT 1
25-128 7/8" 12PT SHORT 1 52-207 7MM 12PT LONG 1 27-451 15/16X1 12PT 45˚ BOX 1 73-014 14" STRAIGHT 1
25-130 15/16" 12PT SHORT 1 52-208 8MM 12PT LONG 1 27-643 3/8X7/16 TAPPET 1 73-018 18" STRAIGHT 1
25-132 1" 12PT SHORT 1 52-209 9MM 12PT LONG 1 27-658 7/16X1/2 TAPPET 1 73-024 24" STRAIGHT 1
25-208 1/4" 12PT LONG 1 52-210 10MM 12PT LONG 1 27-667 1/2X9/16 TAPPET 1
25-210 5/16" 12PT LONG 1 52-211 11MM 12PT LONG 1 27-694 5/8X11/16 TAPPET 1
25-211 11/32" 12PT LONG 1 52-212 12MM 12PT LONG 1 27-724 3/4X7/8 TAPPET 1
25-212 3/8" 12PT LONG 1 52-213 13MM 12PT LONG 1 27-751 15/16X1 TAPPET 1
25-214
25-216
7/16" 12PT LONG
1/2" 12PT LONG
1
1
52-214
52-215
14MM 12PT LONG
15MM 12PT LONG
1
1
28-130
28-135
3/8X7/16 FLARE NUT
1/2X9/16 FLARE NUT
1
1
95-938
25-218 9/16" 12PT LONG 1 52-216 16MM 12PT LONG 1 28-140 5/8X11/16 FLARE NUT 1 Torque Wrenches
25-220 5/8" 12PT LONG 1 52-217 17MM 12PT LONG 1 28-145 3/4X1 FLARE NUT 1
25-222 11/16" 12PT LONG 1 52-218 18MM 12PT LONG 1 28-150 7/8X1-1/8 FLARE NUT 1 Product Description Qty
25-224 3/4" 12PT LONG 1 52-219 19MM 12PT LONG 1 64-005 CLICKER 1/4DR 3-36 IN/LB 1
25-226 13/16" 12PT LONG 1 52-220 20MM 12PT LONG 1 64-032 CLICKER 1/4DR 20-200 IN/LB 1
25-228 7/8" 12PT LONG 1 52-221 21MM 12PT LONG 1 64-041 CLICKER 3/8DR 25-250 IN/LB 1
25-230 15/16" 12PT LONG 1 52-222 22MM 12PT LONG 1 64-046 CLICKER 3/8DR 10-100 FT/LB 1
25-232 1" 12PT LONG 1 52-223 23MM 12PT LONG 1 64-084 CLICKER 1/2DR 10-100 FT/LB 1
25-234 1-1/16" 12PT LONG 1 52-224 24MM 12PT LONG 1 64-085 CLICKER 1/2DR 15-150 FT/LB 1
25-236 1-1/8" 12PT LONG 1 52-225 25MM 12PT LONG 1 64-086 CLICKER 1/2DR 25-250 FT/LB 1
25-240 1-1/4" 12PT LONG 1 52-226 26MM 12PT LONG 1 64-352 DIAL 3/8DR 0-250 IN/LB 1
52-227 27MM 12PT LONG 1 64-740 BEAM 1/2DR 0-150 FT/LB 1
52-228 28MM 12PT LONG 1
52-229 29MM 12PT LONG 1
52-230 30MM 12PT LONG 1

D-6
 D
Merchandising Display Pr ogram
95-940 95-945 95-955 95-960
Soft Face Hammers & Tips Punches and Chisels Screwdrivers - Plain Handle Pliers - Cushion Grip
Product Description Qty Product Description Qty Product Description Qty Product Description Qty
69-003 HAMMER 8 OZ 1" HEAD 1 70-101 PIN PUNCH 1/16 PT 2 66-102 1/4 X 4 ROUND 1 67-065 7-1/4" LINEMAN'S 1
69-009 HAMMER 12 OZ 1-1/2" HEAD 1 70-103 PIN PUNCH 3/32 PT 2 66-103 5/16 X 6 ROUND 1 67-067 8-1/2" LINEMAN'S 1
69-011 HAMMER 1 LB 1-1/2" HEAD 1 70-105 PIN PUNCH 1/8 PT 2 66-106 3/8 X 8 ROUND 1 67-069 9-1/4" LINEMAN'S 1
69-013 HAMMER 1-1/4lb 1-1/2" HEAD 1 70-107 PIN PUNCH 5/32 PT 2 66-108 3/8 X 10 ROUND 1 67-113 8" HVY DUTY DIAG CUTTING 1
69-017 HAMMER 1-1/4 LB 2" HEAD 1 70-109 PIN PUNCH 3/16 PT 2 66-150 #2 STUBBY PHILLIPS 1 67-123 8" HD CUTTING ANGL HEAD 1
69-019 HAMMER 2 LB 2" HEAD 1 70-129 PIN PUNCH 7/32 PT 2 66-152 #0 1/8 X 2.5 PHILLIPS 1 67-155 4-3/16" DIAG CUTTING 1
69-142 TIP 1" SOFT BROWN 1 70-131 PIN PUNCH 1/4 PT 2 66-153 #1 3/16 X 3 PHILLIPS 1 67-159 5-1/2" DIAG CUTTING 1
69-143 TIP 1" MED RED 1 70-133 PIN PUNCH 5/16 PT 2 66-156 #2 1/4 X 4 PHILLIPS 1 67-161 6" DIAG CUTTING 1
69-145 TIP 1" TOUGH GREEN 1 70-187 TAPER PUNCH 3/32 PT 2 66-161 #3 5/16 X 6 PHILLIPS 1 67-163 7-11/16" DIAG CUTTING 1
69-146 TIP 1" MED HARD CREAM 1 70-189 TAPER PUNCH 1/8 PT 2 66-164 #4 3/8 X 8 PHILLIPS 1 67-257 6-5/8" CHAIN NS W/O CUTTER 1
69-148 TIP 1" HARD BLCK 1 70-191 TAPER PUNCH 5/32 PT 2 66-232 STUBBY SQUARE 1 67-305 6-5/8" CHAIN NS W CUTTER 1
69-149 TIP 1" EX-HARD YELLOW 1 70-193 TAPER PUNCH 3/16 PT 2 66-203 3/16 X 4 SQUARE 1 67-307 7-1/8" CHAIN NS W/O CUTTE 1
69-152 TIP 1-1/2" SOFT BROWN 1 70-195 TAPER PUNCH 7/32 PT 2 66-208 1/4 X 4 SQUARE 1 67-367 6-5/8" LONG SLIM NEEDLE NS 1
69-153 TIP 1-1/2" MED RED 1 70-197 TAPER PUNCH 1/4 PT 2 66-211 1/4 X 6 SQUARE 1 67-369 6-5/8" SLIM SPRG NEEDLE NS 1
69-155 TIP 1-1/2" TOUGH GREEN 1 70-199 TAPER PUNCH 5/16 PT 2 66-218 5/16 X 4 SQUARE 1 67-401 6-1/4" BENT NEEDLE NS 1
Mer chandising Display Pr ogram

69-156 TIP 1-1/2" MED HARD CREAM 1 70-201 TAPER PUNCH 3/8 PT 2 66-217 5/16 X 6 SQUARE 1 67-503 8" LG REACH DUCKBILL 1
69-158 TIP 1-1/2" HARD BLCK 1 70-221 ALIGNING PUNCH 5/16 PT 2 66-220 3/8 X 8 SQUARE 1 67-535 8-1/2" END CUTTING NIPPER 1
69-159 TIP 1-1/2" EX-HARD YELLOW 1 70-231 CENTER PUNCH 1/4 HEX 2 66-221 3/8 X 10 SQUARE 1 67-667 6-1/2" COMB SLIP JOINT 1
69-162 TIP 2" SOFT BROWN 1 70-233 CENTER PUNCH 5/16 HEX 2 66-253 1/8 X 3.5 CABINET 1 67-669 8" COMB SLIP JOINT 1
69-163 TIP 2" MED RED 1 70-235 CENTER PUNCH 3/8 HEX 2 66-261 3/16 X 3 CABINET 1 67-777 6-1/2" TONGUE & GROOVE 1
69-165 TIP 2" TOUGH GREEN 1 70-239 CENTER PUNCH 1/2 HEX 2 66-262 3/16 X 4 CABINET 1 67-779 10" TONGUE & GROOVE 1
69-166 TIP 2" MED HARD CREAM 1 70-241 CENTER PUNCH 5/8 HEX 2 66-265 3/16 X 5 CABINET 1 67-781 12" TONGUE & GROOVE 1
69-168 TIP 2" HARD BLACK 1 70-251 PRICK PUNCH 1/4 HEX 2 66-267 3/16 X 6 CABINET 1
69-169 TIP 2" EX-HARD YELLOW 1 70-253 PRICK PUNCH 5/16 HEX 2 66-268 3/16 X 8 CABINET 1
69-172 TIP 2-1/2" SOFT BROWN 1 70-255 PRICK PUNCH 3/8 HEX 2 66-321 T10 3/16 X 3 TORX 1
69-173 TIP 2-1/2" MED RED 1 70-301 STD COLD CHISEL 1/4 CUT 2 66-323 T15 3/16 X 3 TORX 1
69-175
69-176
TIP 2-1/2" TOUGH GREEN
TIP 2-1/2" MED HARD CREAM
1
1
70-303
70-305
STD COLD CHISEL 5/16 CUT
STD COLD CHISEL 3/8 CUT
2
2
66-326
66-327
T20 3/16 X 3 TORX
T25 3/16 X 3 TORX
1
1
95-900
69-178 TIP 2-1/2" HARD BLACK 1 70-307 STD COLD CHISEL 7/16 CUT 2 66-329 T27 1/4 X 4 TORX 1 Universal Board Package
69-179 TIP 2-1/2" EX-HARD YELLOW 1 70-309 STD COLD CHISEL 1/2 CUT 2 66-330 T30 1/4 X 4 TORX 1
70-311 STD COLD CHISEL 5/8 CUT 2 (create a custom merchandiser
70-313 STD COLD CHISEL 3/4 CUT 2
with a board, a blank overlay
70-315 STD COLD CHISEL 7/8 CUT 2
70-317 STD COLD CHISEL 1 CUT 2 and hooks)
95-941 70-319
70-347
STD COLD CHISEL 1-1/8 CUT
12 COLD CHISEL 5/8 CUT
2
2
95-956
Hammers 70-353 12 COLD CHISEL 3/4 CUT 2 Cushion Grip Screwdrivers,
70-361 12 COLD CHISEL 7/8 CUT 2 Nut Drivers, Screw Starters
Product Description Qty 70-367 12 COLD CHISEL 1 CUT 2
69-442 BALL PEIN 4 OZ HICKORY 1 70-531 PRY BAR W/HDL 3/8 SQ X 12 1 Product Description Qty
69-444 BALL PEIN 8 OZ HICKORY 1 70-533 PRY BAR W/HDL 3/8 SQ X 12 1 66-501 1/4 X 4 ROUND 1
69-446 BALL PEIN 12 OZ HICKORY 1 70-535 PRY BAR W/HDL 1/2 SQ X 18 1 66-504 5/16 X 6 ROUND 1
69-448 BALL PEIN 1 LB HICKORY 1 70-865 HACKSAW 10-12" BLADE 1 66-507 3/8 X 8 ROUND 1
69-450 BALL PEIN 1-1/2 LB HICKORY 1 66-521 #2 STUBBY PHILLIPS 1
69-452 BALL PEIN 2 LB HICKORY 1 66-524 #1 3/16 X 3 PHILLIPS 1
69-503 2 LB POWER DRIVE 1 66-527 #2 1/4 X 4 PHILLIPS 1
69-505 3 LB POWER DRIVE 1 66-530 #3 5/16 X 6 PHILLIPS 1
69-513 1-1/2 LB BRASS 1 95-950 66-541 STUBBY SQUARE 1
69-515 2-1/2 LB BRASS 1 66-544 1/4 X 4 SQUARE 1
Deep Throat C-Clamps 66-547 5/16 X 6 SQUARE 1
66-550 3/8 X 8 SQUARE 1
Product Description Qty
66-553 3/8 X 10 SQUARE 1
78-401 0 TO 1-1/2 1 66-561 3/16 X 3 CABINET 1
78-402 0 TO 2 1 66-564 3/16 X 6 CABINET 1
78-403 0 TO 3 1 66-567 3/16 X 8 CABINET 1
78-404 0 TO 4 1 66-570 3/16 X 10 CABINET 1
78-406 0 TO 6 1 66-806 3/16 HEX NUTDRVR 1
78-408 0 TO 8 1 66-807 7/32 HEX NUTDRVR 1
78-410 3 TO 10 1 66-808 1/4 HEX NUTDRVR 1
66-809 9/32 HEX NUTDRVR 1
66-810 5/16 HEX NUTDRVR 1
66-811 11/32 HEX NUTDRVR 1
66-812 3/8 HEX NUTDRVR 1
66-814 7/16 HEX NUTDRVR 1
66-816 1/2 HEX NUTDRVR 1
66-818 9/16 HEX NUTDRVR 1
66-820 5/8 HEX NUTDRVR 1
66-924 5" STARTER/SLOTTED 1
66-927 9" STARTER/SLOTTED 1
66-933 5" STARTER/PHILLIPS 1
66-936 9" STARTER/PHILLIPS 1
66-943 5" NUT STARTER 1

D-7
 E
Alphabetical Index
Chests, Tool ............................1-1 thru 1-12 1/2" Drive ....................................4-37
A Chisels 3/4" Drive ....................................4-43
Adapter Cape ................................................10-7 1" Drive ......................................4-44
Hand Cold ..................................................10-8 Impact
1/4" Drive ....................................4-10 Diamond Point..................................10-7 1/4" Drive ....................................5-10
3/8" Drive ....................................4-25 Rivet Buster......................................10-7 3/8" Drive ....................................5-13
1/2" Drive ....................................4-38 Round Nose......................................10-7 1/2" Drive ....................................5-19
3/4" Drive ....................................4-43 Tool Steel..........................................10-6 3/4" Drive ....................................5-25
1" Drive ......................................4-44 Chisel Sets 1" Drive ......................................5-30
Adapter Cold ..................................................10-3 1-1/2" Drive ................................5-32
Impact Tool Steel..........................................10-3 No. 5 Spline Drive ......................5-35
3/8" Drive ....................................5-13 Clamps Power
1/2" Drive ....................................5-19 C ....................................11-1 thru 11-4 1/4" Drive ....................................5-10
3/4" Drive ....................................5-25 Clicker Torque Wrenches ..........7-3 thru 7-5 Extractors, Screw ..................................12-3
1" Drive ......................................5-30 Clips, Socket..........................................1-12 Eye Bolts................................................11-5
1-1/2" Drive ................................5-33 Collets....................................................13-9
Hex Square..................................5-19 Combination Wrenches..........6-30 thru 6-46 F
No. 5 Spline Drive ......................5-35 Sets ....................................6-8 thru 6-28
Feeler Gauges ..............................12-4, 12-5
Adapter Crowfoot Wrenches
Flange Jack ..................................6-84, 12-1
Locking 1/2" Drive..........................................4-29
Flare Nut Crowfoot Sockets
1/4" Drive ......................................4-9 3/8" Drive ................................4-14, 4-20
3/8" Drive..........................................4-14
Adjustable Wrenches....................6-74, 6-75 Cut-Off Blades ............................14-3, 14-43
Flare Nut Wrenches ......6-64, 6-70 thru 6-73

Alphabetical Index
Angle Wrenches ..........................6-68, 6-69
Flex Extensions
1/4" Drive............................................4-8
B D 3/8" Drive..........................................4-23
Bars Deadblow Hammer ..................10-14, 10-15 Flex Head Ratchet
Pinch ..............................................10-12 Deep Throat C-Clamps ................11-3, 11-4 1/4" Drive............................................4-7
Pry..................................................10-12 Drive Tools and Accessories 3/8" Drive ................................4-24, 4-22
Bearing Separators ......................13-3, 13-8 Hand 1/2" Drive ................................4-35, 4-36
Bits 1/4" Drive ......................4-7 thru 4-10
Screwdriver Socket 3/8" Drive ....................4-21 thru 4-25 G
1/4" Drive ..............................4-4, 4-5 1/2" Drive ....................4-35 thru 4-39
Gauges, Feeler..............................12-4, 12-5
3/8" Drive ....................................4-16 3/4" Drive ....................4-42 thru 4-43
Glasses, Safety ....................................10-13
1/2" Drive ....................................4-31 1" Drive ......................4-44 thru 4-45
Bolts 1-1/2" Drive ................................4-45
Eye....................................................11-5 Impact
H
T-Slot................................................14-1 1/4" Drive ....................................5-10 Hacksaws ..............................................12-6
Box Wrenches ................6-9, 6-47 thru 6-58 3/8" Drive ....................................5-13 Hammer Tips ......................................10-16
Boxes, Tool ..............................1-1 thru 1-12 1/2" Drive ....................................5-19 Hammers
Breaker Bar 3/4" Drive ....................................5-25 Ball Pein..............................10-13, 10-14
1/4" Drive............................................4-8 1" Drive ......................................5-30 Brass ..............................................10-18
Claw................................................10-18
3/8" Drive..........................................4-23 1-1/2" Drive........................5-32, 5-33
Copper............................................10-18
1/2" Drive..........................................4-37 No. 5 Spline Drive ......................5-35
Cross Pein ......................................10-17
3/4" Drive..........................................4-42 Power
Dead Blow ....................10-14 thru 10-16
1" Drive ............................................4-44 1/4" Drive ....................................5-10 Hand Drilling ..................................10-17
Drivers Power Drive....................................10-16
C Hand, Plastic Handle Rubber............................................10-17
Cabinets & Chests, Tool ..........1-1 thru 1-12 1/4" Drive ......................................4-9 Sledge, Double Face ......................10-18
Cases, Tool ............................................1-12 3/8" Drive ....................................4-24 Soft Face ............................10-15, 10-16
C-Clamps Nut....................................8-16 thru 8-21 Handles, Hammer ................................10-15
"400" Series ......................................11-3 Screw........................8-1 thru 8-15, 8-23 Heavy Duty C-Clamps ............................11-1
Deep Throat ............................11-3, 11-4 Hex Driver Sockets
General Service ................................11-2 1/4" Drive ............................4-3, 4-4, 4-6
Heavy Duty ......................................11-1 E 3/8" Drive ................................4-15, 4-20
High Visibility ..................................11-4 Electronic Torque Testers............................7-13 1/2" Drive ................................4-30, 4-34
Spatter Resisting ..............................11-3 Electronic Torque Wrench ....................................7-2 3/4" Drive, Impact ..................5-24, 5-26
Square Throat ..................................11-2 Extensions High-Visibility C-Clamps ........................11-4
Welding ..................................11-2, 11-3 Hand Hinge Handle
Chain Pipe, Tong....................................6-85 1/4" Drive ..............................4-8, 4-9 1/4" Drive............................................4-8
Chain Wrench ........................................6-85 3/8" Drive ..........................4-23, 4-24 3/8" Drive..........................................4-23

E-1
 E
Alphabetical Index
1/2" Drive..........................................4-37 3/8" Drive ....................3-32 thru 3-39 T-Slot................................................14-2
3/4" Drive..........................................4-42 1/2" Drive ....................3-52 thru 3-58
1" Drive ..........................................4-444 3/4" Drive ....................3-62 thru 3-63 O
Sets, Hex Driver, Chrome
Open End Wrenches ..............6-65 thru 6-69
I 1/4" Drive ....................................3-11
O-Ring
3/8" Drive ....................................3-29
Impact Extensions 3/4" Drive..........................................5-25
1/2" Drive ....................................3-50
1/4" Drive..........................................5-10 1" Drive ............................................5-30
Sets, Impact ........5-1, 5-3, 5-6, 5-7, 5-8
3/8" Drive..........................................5-13 1-1/2" Drive ......................................5-33
Sockets
1/2" Drive..........................................5-19 2-1/2" Drive ......................................5-34
Hand, Black Oxide
3/4" Drive..........................................5-25
3/8" Drive ....................................4-17
1" Drive ............................................5-30
1/2" Drive ....................................4-32
P
1-1/2" Drive ......................................5-32
Hand, Chrome Parts, Replacement ................................B-1
No. 5 Spline Drive ............................5-35
1/4" Drive ........4-1 thru 4-3, 4-5, 4-6 Phillips
Impact Sets
3/8" Drive ....4-11 thru 4-13, 4-18, 4-19 Bit Sockets
1/4" Drive............................................5-1
1/2" Drive ....4-26 thru 4-28, 4-33, 4-34 1/4" Drive ......................................4-5
3/8" Drive..............................5-2 thru 5-4
3/4" Drive ..........................4-40, 4-41 3/8" Drive ....................................4-16
1/2" Drive..............................5-4 thru 5-7
Hex Driver 1/2" Drive ....................................4-31
3/4" Drive............................................5-8
1/4" Drive ......................4-3, 4-4, 4-6 Screwdrivers ....................8-7, 8-9, 8-10,
Impact Sockets
3/8" Drive ..........................4-15, 4-20 8-12, 8-13, 8-15
1/4" Drive..........................................5-10
1/2" Drive ..........................4-30, 4-34 Pins
3/8" Drive ............5-11, 5-12, 5-14, 5-15
Impact Retaining, Impact Socket
1/2" Drive ......5-16 thru 5-18, 5-20, 5-21
Alphabetical Index

1/4" Drive ....................................5-10 3/4" Drive ....................................5-25

3/4" Drive..........................5-22 thru 5-24
3/8" Drive ........5-11, 5-12, 5-14, 5-15 1" Drive ......................................5-30
1" Drive ............................5-26 thru 5-29
1/2" Drive ....5-16 thru 5-18, 5-20, 5-21 1-1/2" Drive ................................5-33
1-1/2" Drive ............................5-31, 5-32
3/4" Drive ....................5-22 thru 5-24 2-1/2" Drive ................................5-34
2-1/2" Drive ......................................5-34
Open End Crowfoot Pipe Tong, Chain....................................6-85
No. 5 Spline Drive ............................5-35
3/8" Drive ..........................4-14, 4-20 Pipe Wrench ..........................................6-84
Inspection Mirrors ................................12-2
1/2" Drive ....................................4-29 Plastic Handle Drivers
Wrench 1/4" Drive............................................4-9
J Adjustable ..............................6-74, 6-75 3/8" Drive..........................................4-24
Jacks, Flange................................6-84, 12-1 Angle, Miniature......................6-68, 6-69 Plastic Handle Ratchet ..........................4-21
Box ..................................6-52 thru 6-56 Pliers
K Check Nut Wrench............................6-82 Battery................................................9-1
Combination Black Oxide....6-37, 6-38, 6-45 Cable Cutter........................................9-9
Knife
Combination Full Polish....6-30 thru 6-34, Chain Nose ..........................9-5, 9-6, 9-7
Coping ..............................................12-8
6-39 thru 6-42 Cutting, Diagonal ........................9-3, 9-4
Eletrician's........................................12-8
Combination Satin Finish ......6-35, 6-36, Duckbill ..............................................9-7
Lockback ................................12-7, 12-9
6-43, 6-44 Electrician's ........................9-9 thru 9-11
Multi-Purpose Tool ..........................12-9
Construction ......................................6-78 End Cutting Nippers ..........................9-4
Pruning ............................................12-8
Open End..........................6-65 thru 6-69 Flat Nose ............................................9-7
Utility ................................................12-6
Pipe ..................................................6-84 Heavy Duty Cutting, Diagonal ............9-3
Hose Clamp ........................................9-2
L Ratcheting Flare Nut ........................6-73
Ignition ..............................................9-1
Ratcheting, Box ..................................6-6
Lifting Eye..............................................11-5 Ratcheting, Combination..................6-5,6-6 Lineman's ..........................................9-4
Locking Drive Adapter Sets..............6-1 thru 6-4, 6-8 thru 6-29, Locking ..............................................9-8
1/4" Drive............................................4-9 6-47 thru 6-51, 6-59 thru 6-64, 6-72 Lock Ring ..........................................9-9
Striking ............................6-78 thru 6-80 Needle Nose................................9-6, 9-7
M Structural..........................................6-77 Retaining Ring..................9-12 thru 9-17
Mallet, Rubber ....................................10-17 Micrometer Adjustable Slip Joint ............................................9-2
Master Sets..............................2-1 thru 2-34 Torque Wrenches ............................7-4, 7-5 Snips ................................................9-19
MAXX Ratchet Mirrors, Inspection ................................12-2 Tongue & Groove ..............................9-1
1/4" Drive ......................................4-7 Multipliers, Torque ......................7-11, 7-12 Wire Stripper ..........................9-10, 9-11
3/8" Drive ....................................4-21 Wiretwister..............................9-18, 9-19
1/2" Drive ....................................4-35 N Power Sockets
Measuring Tape ....................................12-1 Hex Driver ........................................5-19
Nut Driver Sets ......................8-16 thru 8-18 Magnetic Self-Tapping Screws ..........5-9,
Metric Nut Drivers ............................8-19 thru 8-21
Feeler Gauges ........................12-4, 12-5 5-11, 5-16
Nut Starters ..........................................8-22 1/4" Drive............................................5-9
Nut Drivers ....8-16, 8-18, 8-19 thru 8-21 Nuts
Sets, Chrome Sockets and Drive Tools 3/8" Drive..........................................5-11
Hex ..................................................14-2 1/2" Drive..........................................5-16
1/4" Drive ....................3-12 thru 3-17

E-2
 E
Alphabetical Index
Self-Tapping Screws Repair Kits
1/4" Drive ......................................5-9 1/4" Drive ....................................4-10
S
Powerdrive Dead Blow Hammer ..........10-16 3/8" Drive ....................................4-25 Safety Glasses ....................................10-13
Pry Bars ..............................................10-12 1/2" Drive ....................................4-39 Saws, Hacksaw......................................12-6
Pullers 3/4" Drive ....................................4-43 Scaffold Ratchet ....................................4-36
2/3-Arm Convertible................13-4, 13-5 1" Drive ......................................4-45 Screw Extractors....................................12-3
2-Arm......................................13-4, 13-4 1-1/2" Drive ................................4-45 Screw Starters ......................................8-22
Attachments ....................................13-7 Round Head Screwdriver Bit Sockets ..4-4, 4-5, 4-16, 4-31
Bearing Separators ................13-3, 13-8 1/4" Drive ..............................4-7, 4-8 Screwdriver Handle Hex Keys..............15-14
Bearing Splitters ..............................13-8 3/8" Drive ....................................4-22 Screwdrivers
Blind Hole ........................................13-3 1/2" Drive ....................................4-35 Cabinet ............................8-9, 8-12, 8-15
Collets ..............................................13-9 Scaffold Cushion Grip ..........................8-14, 8-15
Cone ................................................13-7 1/2" Drive ....................................4-36 Dual Material ......................................8-7
Gear and Pulley ................................13-7 Spinner Offset................................................8-23
Hook ................................................13-9 1/4" Drive ......................................4-9 Phillips ....8-7, -8-9, 8-10, 8-12, 8-13, 8-15
Internal ............................................13-7 3/8" Drive ....................................4-25 Plastic Handle ......................8-6 thru 8-9
Locking Plier Adapter ......................13-9 1/2" Drive ....................................4-38 Cabinet ................................8-9, 8-12
Pilot Bearing ....................................13-8 Spud Electricians' ................................8-15
Posilock ..................................13-1, 13-6 1/2" Drive ....................................4-36 Phillips-Round............8-9, 8-10, 8-12
Push ................................................13-6 Tear Drop Round Shank ................8-8 thru 8-13
Reversible ........................................13-8 1/4" Drive ......................................4-7 Square Shank................................8-8
Sets 3/8" Drive ..........................4-21, 4-22 Square Tip ..................................8-11

Alphabetical Index
10 Ton ........................................13-2 1/2" Drive ..........................4-35, 4-36 Torx ............................................8-11
13 Ton ........................................13-1 3/4" Drive ....................................4-42 Round Shank......................8-7 thru 8-15
2/3-Arm ......................................13-1 1" Drive ......................................4-44 Sets ......................................8-1 thru 8-6
Blind Hole....................................13-3 1-1/2" Drive ................................4-45 Sets
Bearing Splitter ..........................13-3 Ratcheting Box Wrenches ....6-6, 6-57, 6-58 Chisels..............................................10-3
Cone............................................13-3 Repair Kits, Ratchet Hex Driver Sockets
Reversible Sets ..........................13-2 1/4" Drive..........................................4-10 1/4" Drive ..........................3-11, 3-17
Slide Hammer ............................13-2 3/8" Drive..........................................4-25 3/8" Drive ..........................3-29, 3-39
Multipurpose ..............................13-1 1/2" Drive..........................................4-39 1/2" Drive ..........................3-50, 3-58
Posilock ......................................13-1 3/4" Drive..........................................4-43 Impact
Shaft Protectors ....................................13-9 1" Drive ............................................4-45 Hex Driver Sockets
Slide Hammer ..............................13-1, 13-8 1-1/2" Drive ......................................4-45 3/4" Drive................................5-8
Punch Replacment Parts ....................................B-1 Sockets
Aligning ..........................................10-10 Ret Ring 1/4" Drive................................5-1
Center ............................................10-11 3/4" Drive..........................................5-25 3/8" Drive..................5-2 thru 5-4
Drift ................................................10-10 1" Drive ............................................5-30 1/2" Drive..................5-4 thru 5-7
Long Taper ....................................10-11 1-1/2" Drive ......................................5-33 3/4" Drive................................5-8
Pin ..........................................10-8, 10-9 Retaining Ring Pliers ............9-12 thru 9-17 Master ................................2-1 thru 2-34
Prick ..............................................10-11 Retrieving Tools Nut Driver ........................8-16 thru 8-18
Roll Pin ..........................................10-11 Flexible Spring Tool ..........................12-2 Punch......................................10-4, 10-5
Sets, Tool Steel ......................10-4, 10-5 Magnetic ..........................................12-2 Punch & Chisel ................................10-2
Starting ..........................................10-10 Rings Retaining Ring Pliers ....9-13, 9-14, 9-16, 9-17
Tool Steel ..............................10-8, 10-10 O, Impact Sockets Screw Extractors ..............................12-3
Punch & Chisel Holder ..........................10-6 3/4" Drive ....................................5-25 Screwdriver ..........................8-1 thru 8-6
Punch & Chisel Sets ..............................10-2 1" Drive ......................................5-30 Screwdriver Socket
1-1/2" Drive ................................5-33 3/8" Drive ....................................3-30
R 2-1/2" Drive ................................5-34 1/2" Drive ....................................3-50
Retaining Ring Impact Sockets Sockets and Drive Tools, Fractional
Ratchet
3/4" Drive ....................................5-25 Black
Flex Head
1" Drive ......................................5-30 3/8" Drive..............................3-31
1/4" Drive ......................................4-7
1-1/2" Drive ................................5-33 1/2" Drive..............................3-51
3/8" Drive ..........................4-21, 4-22
2-1/2" Drive ................................5-34 Chrome
1/2" Drive ..........................4-35, 4-36
Rivet Buster ..........................................10-7 1/4" Drive................3-1 thru 3-17
Indexing Head
Roller Cabinets ..................1-1, 1-2, 1-5, 1-7 3/8" Drive..............3-18 thru 3-39
1/4" Drive ......................................4-8
Rolls, Vinyl ............................................1-13 1/2" Drive..............3-40 thru 3-58
3/8" Drive ....................................4-22
Rubber Mallet ......................................10-17 3/4" Drive..............3-59 thru 3-63
1/2" Drive ....................................4-36
1" Drive ................3-63 thru 3-65
Plastic Handle
3/8" Drive ....................................4-21

E-3
 E
Alphabetical Index
Torx Driver Hex Driver Spanner Wrenches
1/4" Drive ....................................3-11 1/4" Drive ......................4-3, 4-4, 4-6 Adjustable Face ................................6-81
3/8" Drive ....................................3-30 3/8" Drive ..........................4-15, 4-20 Adjustable Hook ..............................6-82
1/2" Drive ....................................3-50 1/2" Drive ..........................4-30, 4-34 Adjustable Pin ..................................6-82
Wiretwist Pliers ................................9-18 Hex Driver Impact Face ..................................................6-81
Wrench 3/4" Drive ....................................5-24 Pin ....................................................6-81
Adjustable ..................................6-74 Impact Sets ..................................................6-82
Black Finish ....6-21, 6-22, 6-28, 6-60 1/4" Drive ....................................5-10 Speeder Handles
Box..............................6-47 thru 6-51 3/8" Drive ........5-11, 5-12, 5-14, 5-15 1/4" Drive............................................4-9
Combination..................6-8 thru 6-28 1/2" Drive ....5-16 thru 5-18, 5-20, 5-21 3/8" Drive..........................................4-24
Extra Long ..........................6-8, 6-12 3/4" Drive ....................5-22 thru 5-24 1/2" Drive..........................................4-38
Extra Short ........................6-24, 6-25 1" Drive ......................5-26 thru 5-29 Spinners, Ratchet
Flex Head ....................................6-29 1-1/2" Drive........................5-31, 5-32 1/4" Drive............................................4-9
Ratcheting, Combination..................6-2 2-1/2" Drive ................................5-34 3/8" Drive..........................................4-25
Ratcheting, Box ............................6-3 No. 5 Spline Drive ......................5-35 1/2" Drive..........................................4-38
Ratcheting, Stubby........................6-4 Sets ................................5-1 thru 5-8 Spline Drive, No. 5
Ignition ..............................6-62, 6-63 Magnetic Power Self-Tapping Screws Impact Adapter ................................5-35
Long..............................6-9 thru 6-22 1/4" Drive ......................................5-9 Impact Extension..............................5-35
Midget ..............................6-24, 6-25 3/8" Drive ....................................5-11 Impact Universal Joint......................5-35
Open End ....................6-59 thru 6-64 1/2" Drive ....................................5-16 Spud Ratchet ........................................4-36
Ratcheting Box ..................6-50, 6-51 Power Self-Tapping Screws Square Throat C-Clamps........................11-2
Ratcheting Flare Nut....................6-72 1/4" Drive ......................................5-9 Storage, Tool............................1-1 thru 1-13
Alphabetical Index

Regular Length............6-23 thru 6-28 Power, 1/4" Drive................................5-9 Striking Wrenches ................6-78 thru 6-80
Satin Finish ..6-16 thru 6-20, 6-26, 6-27 Screwdriver Stud Remover, 1/2" Drive ......................4-38
Spanner ......................................6-82 1/4" Drive ..............................4-4, 4-5
Tappet ........................................6-61 3/8" Drive ....................................4-16 T
Sledge Hammers ................................10-18 1/2" Drive ....................................4-31
T-Handles
Sliding T- Handles Self-Tapping Screws, Magnetic Power
1/4" Drive............................................4-9
1/4" Drive............................................4-9 1/4" Drive ......................................5-9
3/8" Drive..........................................4-24
3/8" Drive..........................................4-24 3/8" Drive ....................................5-11
1/2" Drive..........................................4-38
1/2" Drive..........................................4-38 1/2" Drive ....................................5-16
3/4" Drive..........................................4-43
3/4" Drive..........................................4-43 Self-Tapping Screws, Power
1" Drive ............................................4-45
1" Drive ............................................4-45 1/4" Drive ......................................5-9
Tapes, Measuring ..................................12-1
Slugging Wrenches................6-78 thru 6-80 Spark Plug
Tappet Wrenches ..................................6-61
Snips, Tin ..............................................9-19 3/8" Drive ....................................4-13
Tin Snips................................................9-19
Socket Bars............................................1-12 1/2" Drive ....................................4-28
Tips, Soft Face Hammer ......................10-16
Socket Clips ..........................................1-12 Torx Bit
Tongs, Chain ..........................................6-85
Sockets 1/4" Drive ......................................4-4
Tongs, Pipe ............................................6-85
Bud Wheel ..............................5-24, 5-29 3/8" Drive ....................................4-16
Tool Boxes ..............................1-1 thru 1-12
Crowfoot 1/2" Drive ....................................4-28
Tool Chests ..............................1-1 thru 1-12
3/8" Drive ..........................4-14, 4-20 Universal, Black Oxide
Tool Storage ............................1-1 thru 1-12
1/2" Drive ....................................4-29 3/8" Drive ....................................4-17
Torque Multiplier ..........................7-11, 7-12
Flare Nut Crowfoot 1/2" Drive ....................................4-32
Torque Testers, Electronic......................7-13
3/8" Drive ....................................4-14 Universal, Chrome
Torque Wrench
1/2" Drive ....................................4-29 3/8" Drive ....................................4-13 Clicker ........................................7-4, 7-5
Flex, Chrome 1/2" Drive ....................................4-32 Deflecting Beam ................................7-8
3/8" Drive ....................................4-13 Universal, Impact Dial ......................................7-6 thru 7-8
1/2" Drive ....................................4-28 3/8" Drive ..........................5-12, 5-13 Electronic............................................7-2
Flex, Impact 1/2" Drive ..........................5-18, 5-21 Electronic Torque Tester ..................7-13
3/8" Drive ..........................5-12, 5-15 Sockets and Drive Tools Micrometer Adjustable................7-4, 7-5
1/2" Drive ..........................5-18, 5-21 Black Multiplier ................................7-11, 7-12
Hand, Black Oxide 3/8" Drive ....................................3-23 Pre-Set ..............................................7-5
3/8" Drive ....................................4-17 1/2" Drive ....................................3-42 Screwdriver ........................................7-5
1/2" Drive ....................................4-32 Chrome Tubes..................................................7-5
Hand, Chrome 1/4" Drive ......................3-1 thru 3-11 Wire Dial Guard ..................................7-7
1/4" Drive ........4-1 thru 4-3, 4-5, 4-6 3/8" Drive ....................3-12 thru 3-31 Torx
3/8" Drive ..................4-11 thru 4-13, 1/2" Drive ....................3-32 thru 3-48 Bit Sockets
4-18, 4-19 3/4" Drive ....................3-49 thru 3-53 1/4" Drive ......................................4-4
1/2" Drive ....4-26 thru 4-28, 4-33, 4-34 1" Drive ......................3-54 thru 3-55 3/8" Drive ....................................4-16
3/4" Drive ..........................4-40, 4-41 Soft Face Hammer Tips ......................10-16 1/2" Drive ......................................4-3
1" Drive ......................................4-44 Soft Face Hammers ............................10-15 Screwdriver ......................................8-11

E-4
 E
Alphabetical Index
Torx Driver Sockets Black Oxide Sets (Cont’d)
1/4" Drive............................................4-4 Adjustable..........................6-74, 6-75 Combination..................6-8 thru 6-28
3/8" Drive..........................................4-16 Adjustable Construction ..............6-78 Extra Long ..........................6-8, 6-12
1/2" Drive..........................................4-30 Check Nut, Thin ..........................6-82 Extra Short ........................6-24, 6-25
Tote Trays ..............................................1-12 Combination............6-21, 6-22, 6-28, Flex Head ....................................6-29
T-Slot 6-37, 6-38, 6-45 Long ..............................6-9 thru 6-22
Bolts ................................................14-1 Construction................................6-78 Midget ..............................6-24, 6-25
Nuts..................................................14-2 Open End, Double Head ......6-59 thru 6-71 Open End ....................6-59 thru 6-64
Open End, Single Head....................6-83 Ratcheting Box, 25˚ Offset..........6-50, 6-51
U Slugging......................6-78 thru 6-80 Ratcheting Flare Nut....................6-72
Spanner ............................6-81, 6-82 Ratcheting ......................6-1 thru 6-4
U-Joint
Striking Face ..............6-78 thru 6-80 Regular Length............6-23 thru 6-28
Hand, Chrome
Structural ....................................6-77 Spanner ..................................6-81, 6-82
1/4" Drive ....................................4-10
Box Striking Face Box..............6-78 thru 6-80
3/8" Drive ....................................4-25
15˚ Long......................................6-52 Structural..........................................6-77
1/2" Drive ....................................4-38
15˚ Short............................6-53, 6-54 Tappet, Double End ..........................6-61
3/4" Drive ....................................4-43
45˚ Long ............................6-55, 6-56 Torque ................................7-2 thru 7-13
Impact
45˚ Short ....................................6-54
3/8" Drive ....................................5-13
Chain ................................................6-85
1/2" Drive ....................................5-19
Combination
3/4" Drive ....................................5-25
Black Oxide ............6-21, 6-22, 6-28,
1" Drive ......................................5-30
6-37, 6-38, 6-45
1-1/2" Drive ................................5-33

Alphabetical Index
Extra Long ........................6-30, 6-32
No. 5 Spline Drive ......................5-35
Extra Short ........................6-40, 6-42
Universal Socket
Flare Nut ............................6-70, 6-71
Hand
Flex Head ....................................6-46
3/8" Drive ....................................4-13
Long............................6-31 thru 6-38
1/2" Drive ....................................4-28
Satin Finish ........6-35, 6-36, 6-43, 6-44
Impact
Open End ....................6-59 thru 6-71
3/8" Drive ..........................5-12, 5-13
Open End Angle ................6-68, 6-69
1/2" Drive ..........................5-18, 5-21
Open End, Single Head ..............6-83
Utility Knife ............................................12-6
Pipe ............................................6-84
Pump, Thin Pattern ....................6-76
V Ratcheting Box, 25˚ Offset ..........6-57
Vinyl Rolls..............................................1-13 Ratcheting Box, Refrigeration ......6-58
Ratcheting, Box End ....6-6, 6-57, 6-58
W Ratcheting, Combination ................6-5
Washers, T-Slot ....................................14-2 Ratcheting, Stubby ........................6-7
Wedges Sets
Set-Up ..............................................14-2 Adjustable ..................................6-74
Wrench Box..............................6-47 thru 6-51
Adjustable ..............................6-74, 6-75 Box 15˚ ..............................6-47, 6-48
Angle, 15˚ & 80˚ Miniature ....6-68, 6-69 Box 45˚........................................6-49

E-5
 F
Product Number Index
ARMSTRONG INDUSTRIAL HAND TOOLS
10-406...............................4-3 10-922...............................4-8 11-030.............................4-11 11-409.............................4-13
10-004 —10-996
10-408...............................4-3 10-922A ............................4-8 11-032.............................4-11 11-410.............................4-13
10-004...............................4-1
10-410...............................4-3 10-923...............................4-8 11-108.............................4-11 11-412.............................4-13
10-005...............................4-1
10-412...............................4-3 10-923A ............................4-8 11-110.............................4-11 11-414.............................4-13
10-006...............................4-1
10-703...............................4-4 10-924...............................4-8 11-111.............................4-11 11-416.............................4-13
10-007...............................4-1
10-704...............................4-4 10-925...............................4-8 11-112.............................4-11 11-418.............................4-13
10-008...............................4-1
10-705...............................4-4 10-926...............................4-8 11-114.............................4-11 11-420.............................4-13
10-009...............................4-1
10-706...............................4-4 10-927...............................4-8 11-116.............................4-11 11-501.............................4-13
10-010...............................4-1
10-707...............................4-4 10-928...............................4-8 11-118.............................4-11 11-504.............................4-13
10-011...............................4-1
10-708...............................4-4 10-929...............................4-8 11-119.............................4-11 11-512.............................4-13
10-012...............................4-1
10-709...............................4-4 10-931...............................4-9 11-120.............................4-11 11-514.............................4-13
10-014...............................4-1
10-710...............................4-4 10-935...............................4-9 11-122.............................4-11 11-516.............................4-13
10-016...............................4-1
10-711...............................4-4 10-938...............................4-9 11-124.............................4-11 11-518.............................4-13
10-018...............................4-1
10-712...............................4-4 10-943...............................4-9 11-126.............................4-11 11-520.............................4-13
10-106...............................4-1
Pr oduct Number Index

10-713...............................4-4 10-945...............................4-9 11-128.............................4-11 11-522.............................4-13

10-107...............................4-1
10-714...............................4-4 10-947.............................4-10 11-130.............................4-11 11-524.............................4-13
10-108...............................4-1
10-743...............................4-3 10-952.............................4-10 11-132.............................4-11 11-708.............................4-15
10-109...............................4-1
10-744...............................4-3 10-963.............................4-10 11-208.............................4-12 11-709.............................4-15
10-110...............................4-1
10-745...............................4-3 10-967A ............................4-7 11-210.............................4-12 11-710.............................4-15
10-111...............................4-1
10-746...............................4-3 10-968A ............................4-7 11-211.............................4-12 11-711.............................4-15
10-112...............................4-1
10-747...............................4-3 10-972...............................4-7 11-212.............................4-12 11-712.............................4-15
10-114...............................4-1
10-748...............................4-3 10-973...............................4-9 11-214.............................4-12 11-713.............................4-15
10-116...............................4-1
10-749...............................4-3 10-974...............................4-9 11-216.............................4-12 11-714.............................4-15
10-118...............................4-1
10-750...............................4-3 10-975...............................4-9 11-218.............................4-12 11-715.............................4-15
10-204...............................4-2
10-751...............................4-3 10-979...............................4-9 11-220.............................4-12 11-748.............................4-15
10-205...............................4-2
10-752...............................4-3 10-982.............................4-10 11-222.............................4-12 11-750.............................4-15
10-206...............................4-2
10-753...............................4-3 10-983.............................4-10 11-224.............................4-12 11-751.............................4-15
10-207...............................4-2
10-754...............................4-3 10-990.............................4-10 11-226.............................4-12 11-752.............................4-15
10-208...............................4-2
10-801...............................4-4 10-992...............................4-7 11-228.............................4-12 11-753.............................4-15
10-209...............................4-2
10-802...............................4-4 10-994...............................4-7 11-230.............................4-12 11-754.............................4-15
10-210...............................4-2
10-821...............................4-5 10-996...............................4-8 11-232.............................4-12 11-755.............................4-15
10-211...............................4-2
10-822...............................4-5 11-308.............................4-12 11-802.............................4-16
10-212...............................4-2
10-823...............................4-5 11-310.............................4-12 11-803.............................4-16
10-214...............................4-2
10-868...............................4-4
11-008 —11-996 11-311.............................4-12 11-805.............................4-16
10-216...............................4-2 11-008.............................4-11
10-870...............................4-4 11-312.............................4-12 11-821.............................4-16
10-218...............................4-2 11-010.............................4-11
10-872...............................4-4 11-314.............................4-12 11-822.............................4-16
10-306...............................4-2 11-011.............................4-11
10-874...............................4-4 11-316.............................4-12 11-825.............................4-16
10-307...............................4-2 11-012.............................4-11
10-876...............................4-4 11-318.............................4-12 11-828.............................4-16
10-308...............................4-2 11-014.............................4-11
10-878...............................4-4 11-320.............................4-12 11-842.............................4-14
10-309...............................4-2 11-016.............................4-11
10-880...............................4-4 11-322.............................4-12 11-843.............................4-14
10-310...............................4-2 11-018.............................4-11
10-915...............................4-7 11-324.............................4-12 11-844.............................4-14
10-311...............................4-2 11-020.............................4-11
10-915A ............................4-8 11-326.............................4-12 11-845.............................4-14
10-312...............................4-2 11-022.............................4-11
10-918...............................4-8 11-328.............................4-12 11-846.............................4-14
10-314...............................4-2 11-024.............................4-11
10-919A ............................4-8 11-330.............................4-12 11-847.............................4-14
10-316...............................4-2 11-026.............................4-11
10-920...............................4-8 11-332.............................4-12 11-848.............................4-14
10-318...............................4-2 11-028.............................4-11
10-921...............................4-8 11-408.............................4-13 11-849.............................4-14

F-1
 F
Pr oduct Number Index
11-850.............................4-14 11-951.............................4-25 12-112.............................4-26 12-324.............................4-27 12-821.............................4-31
11-851.............................4-14 11-952.............................4-25 12-114.............................4-26 12-326.............................4-27 12-822.............................4-31
11-852.............................4-14 11-953 ............................4-24 12-116.............................4-26 12-328.............................4-27 12-825.............................4-31
11-853.............................4-14 11-954.............................4-24 12-118.............................4-26 12-330.............................4-27 12-828.............................4-31
11-854.............................4-14 11-955.............................4-24 12-119.............................4-26 12-332.............................4-27 12-840.............................4-29
11-855.............................4-14 11-956.............................4-24 12-120.............................4-26 12-334.............................4-27 12-841.............................4-29
11-856.............................4-14 11-957.............................4-24 12-121.............................4-26 12-336.............................4-27 12-842.............................4-29
11-857.............................4-14 11-958.............................4-24 12-122.............................4-26 12-338.............................4-27 12-843.............................4-29
11-858.............................4-14 11-959.............................4-24 12-124.............................4-26 12-340.............................4-27 12-844.............................4-29
11-859.............................4-14 11-963.............................4-25 12-125.............................4-26 12-342.............................4-27 12-845.............................4-29
11-860.............................4-14 11-967A ..........................4-22 12-126.............................4-26 12-344.............................4-27 12-846.............................4-29
11-870.............................4-16 11-972.............................4-21 12-128.............................4-26 12-346.............................4-27 12-847.............................4-29
11-872.............................4-16 11-972A ..........................4-22 12-130.............................4-26 12-348.............................4-27 12-848.............................4-29
11-874.............................4-16 11-973.............................4-21 12-132.............................4-26 12-410.............................4-28 12-849.............................4-29
11-876.............................4-16 11-974.............................4-21 12-134.............................4-26 12-412.............................4-28 12-850.............................4-29
11-878.............................4-16 11-974A ..........................4-22 12-136.............................4-26 12-414.............................4-28 12-851.............................4-29

Pr oduct Number Index

11-880.............................4-16 11-978.............................4-21 12-138.............................4-26 12-416.............................4-28 12-852.............................4-29
11-882.............................4-16 11-979.............................4-21 12-140.............................4-26 12-418.............................4-28 12-853.............................4-29
11-884.............................4-16 11-982.............................4-25 12-142.............................4-26 12-420.............................4-28 12-854.............................4-29
11-886.............................4-16 11-983.............................4-25 12-144.............................4-26 12-422.............................4-28 12-859.............................4-29
11-888.............................4-16 11-990.............................4-25 12-146.............................4-26 12-424.............................4-28 12-860.............................4-29
11-915.............................4-22 11-991.............................4-25 12-148.............................4-26 12-426.............................4-28 12-861.............................4-29
11-915A ..........................4-22 11-992.............................4-21 12-212.............................4-27 12-428.............................4-28 12-862.............................4-29
11-918.............................4-23 11-994.............................4-21 12-214.............................4-27 12-432.............................4-28 12-863.............................4-29
11-918A ..........................4-23 11-996.............................4-22 12-216.............................4-27 12-504.............................4-28 12-866.............................4-29
11-920.............................4-23 12-218.............................4-27 12-516.............................4-28 12-867.............................4-29
11-921.............................4-23 12-220.............................4-27 12-518.............................4-28 12-878.............................4-30
11-921A ..........................4-23
12-012 —12-996 12-222.............................4-27 12-520.............................4-28 12-880.............................4-30
11-922.............................4-23 12-012.............................4-26 12-224.............................4-27 12-522.............................4-28 12-882.............................4-30
11-922A ..........................4-23 12-014.............................4-26 12-226.............................4-27 12-524.............................4-28 12-884.............................4-30
11-923.............................4-23 12-016.............................4-26 12-228.............................4-27 12-713.............................4-30 12-886.............................4-30
11-923A ..........................4-23 12-018.............................4-26 12-230.............................4-27 12-714.............................4-30 12-888.............................4-30
11-925.............................4-23 12-020.............................4-26 12-232.............................4-27 12-715.............................4-30 12-890.............................4-30
11-925A ..........................4-23 12-022.............................4-26 12-234.............................4-27 12-716.............................4-30 12-892.............................4-31
11-927.............................4-23 12-024.............................4-26 12-236.............................4-27 12-717.............................4-30 12-893.............................4-31
11-928.............................4-23 12-026.............................4-26 12-238.............................4-27 12-718.............................4-30 12-907.............................4-36
11-929.............................4-23 12-028.............................4-26 12-240.............................4-27 12-719.............................4-30 12-915.............................4-36
11-934.............................4-23 12-030.............................4-26 12-242.............................4-27 12-721.............................4-30 12-916A ..........................4-36
11-935.............................4-24 12-032.............................4-26 12-244.............................4-27 12-753.............................4-30 12-917.............................4-37
11-935A ..........................4-24 12-034.............................4-26 12-246.............................4-27 12-754.............................4-30 12-917A ..........................4-37
11-936.............................4-23 12-036.............................4-26 12-248.............................4-27 12-755.............................4-30 12-918.............................4-37
11-937.............................4-23 12-038.............................4-26 12-312.............................4-27 12-757.............................4-30 12-918A ..........................4-37
11-938.............................4-24 12-040.............................4-26 12-314.............................4-27 12-758.............................4-30 12-920.............................4-37
11-939.............................4-23 12-042.............................4-26 12-316.............................4-27 12-759.............................4-30 12-921.............................4-37
11-943.............................4-24 12-044.............................4-26 12-318.............................4-27 12-802.............................4-31 12-923.............................4-37
11-945.............................4-25 12-046.............................4-26 12-320.............................4-27 12-803.............................4-31 12-923A ..........................4-37
11-947.............................4-25 12-048.............................4-26 12-322.............................4-27 12-805.............................4-31 12-924.............................4-37

F-2
 F
Product Number Index
12-924A ..........................4-37 13-146.............................4-40 14-152.............................4-44 15-032.............................2-11 15-247A ............................3-7
12-927.............................4-37 13-148.............................4-40 14-154.............................4-44 15-035.............................2-12 15-248A ............................3-5
12-931.............................4-37 13-150.............................4-40 14-156.............................4-44 15-036.............................2-12 15-249A ............................3-9
12-935.............................4-38 13-152.............................4-40 14-158.............................4-44 15-037.............................2-12 15-250.............................3-10
12-935A ..........................4-38 13-154.............................4-40 14-160.............................4-44 15-040.............................2-13 15-255.............................3-10
12-936.............................4-37 13-156.............................4-40 14-164.............................4-44 15-041.............................2-13 15-260.............................3-11
12-937.............................4-37 13-158.............................4-40 14-168.............................4-44 15-042.............................2-13 15-265.............................3-11
12-938.............................4-38 13-160.............................4-40 14-170.............................4-44 15-045.............................2-14 15-270.............................3-11
12-939.............................4-37 13-164.............................4-40 14-172.............................4-44 15-046.............................2-14 15-300.............................3-18
12-945.............................4-38 13-166.............................4-40 14-176.............................4-44 15-047.............................2-14 15-305.............................3-18
12-947.............................4-38 13-168.............................4-40 14-180.............................4-44 15-050.............................2-15 15-310.............................3-19
12-948.............................4-38 13-170.............................4-40 14-182.............................4-44 15-051.............................2-15 15-315.............................3-19
12-951.............................4-38 13-172.............................4-40 14-184.............................4-44 15-052.............................2-15 15-320.............................3-20
12-952.............................4-38 13-174.............................4-40 14-188.............................4-44 15-055.............................2-16 15-321A ..........................3-24
12-963.............................4-39 13-176.............................4-40 14-194.............................4-44 15-056.............................2-16 15-322A ..........................3-23
12-967A ..........................4-36 13-328.............................4-40 14-196.............................4-44 15-057.............................2-16 15-323A ..........................3-22
Pr oduct Number Index

12-972.............................4-35 13-330.............................4-40 14-200.............................4-44 15-060.............................2-17 15-324A ..........................3-26

12-973.............................4-35 13-332.............................4-40 14-212.............................4-44 15-061.............................2-17 15-325.............................3-20
12-974.............................4-35 13-334.............................4-40 14-906.............................4-44 15-062.............................2-17 15-326A ..........................3-27
12-974A ..........................4-36 13-336.............................4-40 14-918.............................4-44 15-065.............................2-18 15-330.............................3-21
12-975A ..........................4-35 13-340.............................4-40 14-924.............................4-44 15-066.............................2-18 15-331.............................3-21
12-982.............................4-39 13-342.............................4-40 14-926.............................4-44 15-070.............................2-19 15-335.............................3-23
12-983.............................4-39 13-344.............................4-40 14-938.............................4-45 15-071.............................2-19 15-340.............................3-24
12-984.............................4-37 13-346.............................4-40 14-939.............................4-45 15-075.............................2-20 15-345.............................3-24
12-985.............................4-37 13-348.............................4-40 14-940.............................4-45 15-076.............................2-20 15-350.............................3-25
12-986.............................4-37 13-352.............................4-40 14-951.............................4-45 15-080.............................2-21 15-355.............................3-25
12-987.............................4-37 13-918.............................4-42 14-966.............................4-45 15-081.............................2-21 15-360.............................3-25
12-988.............................4-36 13-922.............................4-43 15-085.............................2-22 15-361.............................3-25
12-990.............................4-39 13-923.............................4-43 15-086.............................2-22 15-365.............................3-26
12-991.............................4-39 13-925.............................4-43
15-000 —15-810 15-087.............................2-22 15-370.............................3-26
12-992.............................4-35 13-938.............................4-43 15-000...............................2-2 15-090.............................2-23 15-375.............................3-26
12-994.............................4-35 13-947.............................4-43 15-001...............................2-2 15-091.............................2-23 15-380.............................3-27
12-996.............................4-36 13-951.............................4-43 15-005...............................2-5 15-095.............................2-24 15-385.............................3-27
13-952.............................4-43 15-006...............................2-5 15-096.............................2-24 15-390.............................3-27
13-972.............................4-42 15-010...............................2-7 15-097.............................2-24 15-395.............................3-28
13-124 —13-990 13-972A ..........................4-42 15-011...............................2-7 15-200...............................3-1 15-400.............................3-28
13-124.............................4-40 13-990.............................4-43 15-015...............................2-8 15-205...............................3-2 15-405.............................3-28
13-126.............................4-40 15-016...............................2-8 15-210...............................3-3 15-415.............................3-28
13-128.............................4-40 15-017...............................2-8 15-215...............................3-4 15-425.............................3-29
13-130.............................4-40 14-134 —14-966 15-020...............................2-9 15-216...............................3-5 15-430.............................3-29
13-132.............................4-40 14-134.............................4-44 15-021...............................2-9 15-220...............................3-6 15-435.............................3-29
13-134.............................4-40 14-136.............................4-44 15-022...............................2-9 15-225...............................3-6 15-440.............................3-29
13-136.............................4-40 14-140.............................4-44 15-025.............................2-10 15-230...............................3-8 15-445.............................3-30
13-138.............................4-40 14-142.............................4-44 15-026.............................2-10 15-235...............................3-8 15-450.............................3-30
13-140.............................4-40 14-144.............................4-44 15-027.............................2-10 15-240...............................3-9 15-455.............................3-30
13-142.............................4-40 14-146.............................4-44 15-030.............................2-11 15-245...............................3-9 15-500.............................3-40
13-144.............................4-40 14-148.............................4-44 15-031.............................2-11 15-246A ............................3-7 15-505.............................3-40

F-3
 F
Pr oduct Number Index
15-510.............................3-41 16-606.............................1-12 16-889...............................1-8 18-011...............................5-9 18-972...............................4-7
15-511.............................3-41 16-607.............................1-11 16-901...............................1-5 18-012...............................5-9
15-515.............................3-42 16-611.............................1-10 16-977...............................1-5 18-014...............................5-9
15-517A ..........................3-43 16-613.............................1-12 16-978...............................1-6 18-016...............................5-9
19-080 —19-972A
15-518A ..........................3-45 16-615.............................1-12 16-980...............................1-7 18-036...............................5-9 19-080.............................5-11
15-519A ..........................3-46 16-620.............................1-10 16-981...............................1-6 18-038...............................5-9 19-082.............................5-11
15-520.............................3-43 16-621.............................1-12 16-982...............................1-7 18-039...............................5-9 19-084.............................5-11
15-521A ..........................3-47 16-622...............................1-4 16-984...............................1-2 18-040...............................5-9 19-086.............................5-11
15-524A ..........................2-34 16-623.............................1-12 16-986...............................1-2 18-042...............................5-9 19-088.............................5-11
15-525.............................3-44 16-625...............................1-4 16-988...............................1-1 18-044...............................5-9 19-108.............................4-17
15-530.............................3-44 16-626...............................1-4 18-046...............................5-9 19-110.............................4-17
15-535.............................3-45 16-629.............................1-12 18-076...............................5-9 19-112.............................4-17
15-540.............................3-45 16-635.............................1-12
17-434 —17-598 18-078...............................5-9 19-114.............................4-17
15-545.............................3-46 16-641.............................1-12 17-434.............................5-35 18-079...............................5-9 19-116.............................4-17
15-550.............................3-46 16-649.............................1-12 17-436.............................5-35 18-080...............................5-9 19-118.............................4-17
15-555.............................3-46 16-651.............................1-12 17-440.............................5-35 18-081...............................5-9 19-120.............................4-17

Pr oduct Number Index

15-560.............................3-47 16-653.............................1-12 17-442.............................5-35 18-082...............................5-9 19-122.............................4-17
15-561.............................3-47 16-657.............................1-12 17-444.............................5-35 18-084...............................5-9 19-124.............................4-17
15-565.............................3-47 16-659.............................1-12 17-446.............................5-35 18-086...............................5-9 19-126.............................4-17
15-570.............................3-48 16-681.............................1-12 17-448.............................5-35 18-206...............................5-9 19-128.............................4-17
15-575.............................3-48 16-685.............................1-12 17-452.............................5-35 18-208...............................5-9 19-130.............................4-17
15-580.............................3-48 16-691.............................1-12 17-454.............................5-35 18-209...............................5-9 19-132.............................4-17
15-585.............................3-49 16-695.............................1-12 17-456.............................5-35 18-210...............................5-9 19-150.............................3-31
15-590.............................3-49 16-697.............................1-12 17-458.............................5-35 18-211...............................5-9 19-155.............................3-31
15-595.............................3-49 16-790...............................1-1 17-460.............................5-35 18-212...............................5-9 19-160.............................3-31
15-600.............................3-49 16-831.............................1-12 17-464.............................5-35 18-214...............................5-9 19-308.............................4-17
15-605.............................3-50 16-832.............................1-12 17-468.............................5-35 18-216...............................5-9 19-310.............................4-17
15-610.............................3-50 16-834.............................1-12 17-470.............................5-35 18-606.............................5-10 19-312.............................4-17
15-615.............................3-50 16-835.............................1-12 17-472.............................5-35 18-607.............................5-10 19-314.............................4-17
15-620.............................3-50 16-836.............................1-12 17-474.............................5-35 18-608.............................5-10 19-316.............................4-17
15-700.............................3-59 16-837.............................1-12 17-476.............................5-35 18-609.............................5-10 19-318.............................4-17
15-705.............................3-60 16-838.............................1-12 17-480.............................5-35 18-610.............................5-10 19-320.............................4-17
15-710.............................3-60 16-839.............................1-12 17-482.............................5-35 18-611.............................5-10 19-322.............................4-17
15-715.............................3-61 16-841.............................1-12 17-484.............................5-35 18-612.............................5-10 19-324.............................4-17
15-735.............................3-61 16-843.............................1-12 17-488.............................5-35 18-614.............................5-10 19-326.............................4-17
15-740.............................3-61 16-844.............................1-12 17-496.............................5-35 18-616.............................5-10 19-328.............................4-17
15-800.............................3-64 16-845.............................1-12 17-592.............................5-35 18-618.............................5-10 19-330.............................4-17
15-805.............................3-64 16-846.............................1-12 17-596.............................5-35 18-620.............................5-10 19-332.............................4-17
15-810.............................3-65 16-847.............................1-12 17-598.............................5-35 18-890...............................5-1 19-408.............................5-12
16-848.............................1-12 18-921.............................5-10 19-414.............................5-12
16-874...............................1-3 18-923.............................5-10 19-416.............................5-12
16-600 —16-988 18-006 —18-972 19-418.............................5-12
16-876...............................1-3 18-935.............................5-10
16-600.............................1-11 18-006...............................5-9 19-512.............................4-17
16-880...............................1-9 18-936.............................5-10
16-601.............................1-12 18-007...............................5-9 19-514.............................4-17
16-881...............................1-9 18-937.............................5-10
16-602.............................1-11 18-008...............................5-9 19-516.............................4-17
16-882...............................1-9 18-938.............................5-10
16-604.............................1-12 18-009...............................5-9 19-518.............................4-17
16-883...............................1-8 18-939.............................5-10
16-605.............................1-11 18-010...............................5-9 19-520.............................4-17
16-888...............................1-3 18-940.............................5-10

F-4
 F
Product Number Index
19-522.............................4-17 19-828.............................5-12 20-118.............................4-32 20-340.............................4-32 20-648.............................5-18
19-524.............................4-17 19-83...............................5-12 20-120.............................4-32 20-412.............................5-17 20-650.............................3-51
19-562.............................5-12 19-832.............................5-12 20-122.............................4-32 20-414.............................5-17 20-660.............................3-51
19-564.............................5-12 19-890...............................5-2 20-124.............................4-32 20-416.............................5-17 20-712.............................5-17
19-566.............................5-12 19-894...............................5-2 20-126.............................4-32 20-418.............................5-17 20-714.............................5-17
19-568.............................5-12 19-895...............................5-2 20-128.............................4-32 20-420.............................5-17 20-716.............................5-17
19-570.............................5-12 19-918.............................4-23 20-130.............................4-32 20-422.............................5-17 20-718.............................5-17
19-572.............................5-12 19-922.............................5-13 20-132.............................4-32 20-424.............................5-17 20-720.............................5-17
19-574.............................5-12 19-923.............................5-13 20-134.............................4-32 20-426.............................5-17 20-722.............................5-17
19-608.............................5-11 19-935.............................5-13 20-136.............................4-32 20-428.............................5-17 20-724.............................5-17
19-610.............................5-11 19-936.............................5-13 20-140.............................4-32 20-430.............................5-17 20-726.............................5-17
19-611.............................5-11 19-937.............................5-13 20-142.............................4-32 20-432.............................5-17 20-728.............................5-17
19-612.............................5-11 19-940.............................5-13 20-144.............................4-32 20-434.............................5-17 20-730.............................5-17
19-614.............................5-11 19-947.............................5-13 20-146.............................4-32 20-436.............................5-17 20-732.............................5-17
19-616.............................5-11 19-952.............................5-13 20-148.............................4-32 20-516.............................4-32 20-812.............................5-17
19-618.............................5-11 19-952A ..........................5-13 20-212.............................5-16 20-518.............................4-32 20-814.............................5-17
Pr oduct Number Index

19-620.............................5-11 19-972.............................4-21 20-214.............................5-16 20-520.............................4-32 20-816.............................5-17

19-622.............................5-11 19-972A ..........................4-22 20-216.............................5-16 20-522.............................4-32 20-818.............................5-17
19-624.............................5-11 20-218.............................5-16 20-524.............................4-32 20-820.............................5-17
19-626.............................5-11 20-220.............................5-16 20-564.............................5-18 20-822.............................5-17
19-628.............................5-11
20-012 —20-996 20-222.............................5-16 20-566.............................5-18 20-824.............................5-17
19-630.............................5-11 20-012.............................5-16 20-224.............................5-16 20-568.............................5-18 20-826.............................5-17
19-632.............................5-11 20-014.............................5-16 20-226.............................5-16 20-570.............................5-18 20-828.............................5-17
19-708.............................5-11 20-016.............................5-16 20-228.............................5-16 20-572.............................5-18 20-830.............................5-17
19-709.............................5-11 20-018.............................5-16 20-230.............................5-16 20-574.............................5-18 20-832.............................5-17
19-710.............................5-11 20-020.............................5-16 20-232.............................5-16 20-576.............................5-18 20-834.............................5-17
19-711.............................5-11 20-022.............................5-16 20-234.............................5-16 20-578.............................5-18 20-836 ............................5-17
19-712.............................5-11 20-024.............................5-16 20-236.............................5-16 20-580.............................5-18 20-838.............................5-17
19-714.............................5-11 20-026.............................5-16 20-238.............................5-16 20-582.............................5-18 20-840.............................5-17
19-716.............................5-11 20-028.............................5-16 20-240.............................5-16 20-612.............................5-18 20-842.............................5-17
19-718.............................5-11 20-030.............................5-16 20-242.............................5-16 20-614.............................5-18 20-844 ............................5-17
19-720.............................5-11 20-032.............................5-16 20-244.............................5-16 20-616.............................5-18 20-846.............................5-17
19-722.............................5-11 20-034.............................5-16 20-246.............................5-16 20-618.............................5-18 20-848.............................5-17
19-724.............................5-11 20-036.............................5-16 20-248.............................5-16 20-620 ............................5-18 20-889...............................5-4
19-726.............................5-11 20-038.............................5-16 20-312.............................4-32 20-622 ............................5-18 20-891A ............................5-5
19-728.............................5-11 20-040.............................5-16 20-314.............................4-32 20-624.............................5-18 20-893...............................5-5
19-730.............................5-11 20-042.............................5-16 20-316.............................4-32 20-626.............................5-18 20-894...............................5-5
19-732.............................5-11 20-044.............................5-16 20-318.............................4-32 20-628 ............................5-18 20-895A ............................5-6
19-810.............................5-12 20-046.............................5-16 20-320.............................4-32 20-630 ............................5-18 20-897...............................5-4
19-812.............................5-12 20-048.............................5-16 20-322.............................4-32 20-632.............................5-18 20-899...............................5-4
19-814.............................5-12 20-082.............................5-16 20-324.............................4-32 20-634.............................5-18 20-918.............................4-37
19-816.............................5-12 20-084.............................5-16 20-326.............................4-32 20-636.............................5-18 20-922A ..........................5-19
19-818.............................5-12 20-086.............................5-16 20-328.............................4-32 20-638.............................5-18 20-923.............................5-19
19-820.............................5-12 20-088.............................5-16 20-330.............................4-32 20-640.............................5-18 20-923A ..........................5-19
19-822.............................5-12 20-112.............................4-32 20-332.............................4-32 20-642 ............................5-18 20-924.............................5-19
19-824.............................5-12 20-114.............................4-32 20-334.............................4-32 20-644.............................5-18 20-935.............................5-19
19-826.............................5-12 20-116.............................4-32 20-336.............................4-32 20-646.............................5-18 20-936.............................5-19

F-5
 F
Pr oduct Number Index
20-937.............................5-19 21-124.............................5-23 21-260.............................5-22 22-036.............................5-27 22-240.............................5-28
20-940.............................5-19 21-126.............................5-23 21-262.............................5-22 22-038.............................5-27 22-242.............................5-28
20-947.............................5-19 21-128.............................5-23 21-264.............................5-22 22-040.............................5-27 22-244.............................5-28
20-951.............................5-19 21-130.............................5-23 21-420.............................5-23 22-042.............................5-27 22-246.............................5-28
20-952.............................5-19 21-132.............................5-23 21-422.............................5-23 22-044.............................5-27 22-248.............................5-28
20-953.............................5-19 21-134.............................5-23 21-424.............................5-23 22-046.............................5-27 22-250.............................5-28
20-959.............................5-19 21-136.............................5-23 21-426.............................5-23 22-048.............................5-27 22-252.............................5-28
20-966.............................4-39 21-138.............................5-23 21-428.............................5-23 22-050.............................5-27 22-254.............................5-28
20-972.............................4-35 21-140.............................5-23 21-430.............................5-23 22-052.............................5-27 22-256.............................5-28
20-973A ..........................4-36 21-142.............................5-23 21-432.............................5-23 22-054.............................5-27 22-258.............................5-28
20-996.............................5-19 21-144.............................5-23 21-434.............................5-23 22-056.............................5-27 22-260.............................5-28
21-146.............................5-23 21-436.............................5-23 22-058.............................5-27 22-262.............................5-28
21-148.............................5-23 21-438.............................5-23 22-060.............................5-27 22-264.............................5-28
21-016 —21-972 21-150.............................5-23 21-440.............................5-23 22-062.............................5-27 22-266.............................5-28
21-016.............................5-22 21-152.............................5-23 21-442.............................5-23 22-064.............................5-27 22-268.............................5-28
21-018.............................5-22 21-154.............................5-23 21-446.............................5-23 22-066.............................5-27 22-270.............................5-28

Pr oduct Number Index

21-020.............................5-22 21-156.............................5-23 21-505.............................5-24 22-068.............................5-27 22-272.............................5-28
21-022.............................5-22 21-158.............................5-23 21-718.............................5-24 22-070.............................5-27 22-274.............................5-28
21-024.............................5-22 21-160.............................5-23 21-719.............................5-24 22-072.............................5-27 22-276.............................5-28
21-026.............................5-22 21-162.............................5-23 21-721.............................5-24 22-074.............................5-27 22-282.............................5-28
21-028.............................5-22 21-164.............................5-23 21-723.............................5-24 22-076.............................5-27 22-288.............................5-28
21-030.............................5-22 21-166.............................5-23 21-725.............................5-24 22-078.............................5-27 22-424.............................5-28
21-032.............................5-22 21-168.............................5-23 21-893...............................5-8 22-080.............................5-27 22-426.............................5-28
21-034.............................5-22 21-170.............................5-23 21-899...............................5-8 22-082.............................5-27 22-428.............................5-28
21-036.............................5-22 21-172.............................5-23 21-918.............................4-42 22-084.............................5-27 22-430.............................5-28
21-038.............................5-22 21-176.............................5-23 21-923.............................5-25 22-086.............................5-27 22-432.............................5-28
21-040.............................5-22 21-218.............................5-22 21-924.............................5-25 22-088.............................5-27 22-436.............................5-28
21-042.............................5-22 21-220.............................5-22 21-925.............................5-25 22-090.............................5-27 22-505.............................5-29
21-044.............................5-22 21-222.............................5-22 21-947.............................5-25 22-092.............................5-27 22-906.............................4-44
21-046.............................5-22 21-224.............................5-22 21-951.............................5-25 22-094.............................5-27 22-923.............................5-30
21-048.............................5-22 21-226.............................5-22 21-952.............................5-25 22-096.............................5-27 22-925.............................5-30
21-050.............................5-22 21-228.............................5-22 21-953.............................5-25 22-100.............................5-27 22-947.............................5-30
21-052.............................5-22 21-230.............................5-22 21-962.............................5-25 22-104.............................5-27 22-951.............................5-30
21-054.............................5-22 21-232.............................5-22 21-963.............................5-25 22-108.............................5-27 22-952.............................5-30
21-056.............................5-22 21-234.............................5-22 21-964.............................5-25 22-112.............................5-27 22-962.............................5-30
21-058.............................5-22 21-236.............................5-22 21-965.............................5-25 22-116.............................5-27 22-963.............................5-30
21-060.............................5-22 21-238.............................5-22 21-967.............................5-25 22-118.............................5-27 22-964.............................5-30
21-062.............................5-22 21-240.............................5-22 21-972.............................4-42 22-120.............................5-27 22-965.............................5-30
21-064.............................5-22 21-242.............................5-22 22-122.............................5-27
21-066.............................5-22 21-244.............................5-22 22-124.............................5-27
21-068.............................5-22 21-246.............................5-22
22-024 —22-965 22-126.............................5-27
23-044 —23-966
21-070.............................5-22 21-248.............................5-22 22-024.............................5-27 22-228.............................5-28 23-044.............................5-31
21-072.............................5-22 21-250.............................5-22 22-026.............................5-27 22-230.............................5-28 23-046.............................5-31
21-076.............................5-22 21-252.............................5-22 22-028.............................5-27 22-232.............................5-28 23-048.............................5-31
21-118.............................5-23 21-254.............................5-22 22-030.............................5-27 22-234.............................5-28 23-050.............................5-31
21-120.............................5-23 21-256.............................5-22 22-032.............................5-27 22-236.............................5-28 23-052.............................5-31
21-122.............................5-23 21-258.............................5-22 22-034.............................5-27 22-238.............................5-28 23-054.............................5-31

F-6
 F
Product Number Index
23-056.............................5-31 23-160.............................5-31 23-340.............................5-32 24-220.............................5-34 25-170.............................6-40
23-058.............................5-31 23-244.............................5-32 23-344.............................5-32 24-244.............................5-34 25-172.............................6-40
23-060.............................5-31 23-246.............................5-32 23-348.............................5-32 24-961.............................5-34 25-174.............................6-40
23-062.............................5-31 23-248.............................5-32 23-352.............................5-32 24-962.............................5-34 25-208.............................6-31
23-064.............................5-31 23-252.............................5-32 23-906.............................4-45 24-963.............................5-34 25-210.............................6-31
23-066.............................5-31 23-254.............................5-32 23-924.............................5-32 25-211.............................6-31
23-068.............................5-31 23-256.............................5-32 23-928.............................5-32 25-212.............................6-31
23-070.............................5-31 23-258.............................5-32 23-947.............................5-33
25-004 —25-824 25-214.............................6-31
23-072.............................5-31 23-260.............................5-32 23-951.............................5-33 25-004.............................6-40 25-216.............................6-31
23-074.............................5-31 23-264.............................5-32 23-962.............................5-33 25-005.............................6-40 25-218.............................6-31
23-076.............................5-31 23-266.............................5-32 23-963.............................5-33 25-006.............................6-40 25-220.............................6-31
23-078.............................5-31 23-268.............................5-32 23-964.............................5-33 25-007.............................6-40 25-222.............................6-31
23-080.............................5-31 23-270.............................5-32 23-966.............................4-45 25-008.............................6-40 25-224.............................6-31
23-082.............................5-31 23-272.............................5-32 25-009.............................6-40 25-226.............................6-31
23-084.............................5-31 23-274.............................5-32 25-010.............................6-40 25-228.............................6-31
23-086.............................5-31 23-276.............................5-32
24-064 —24-963 25-011.............................6-40 25-230.............................6-31
Pr oduct Number Index

23-088.............................5-31 23-278.............................5-32 24-064.............................5-34 25-012.............................6-40 25-232.............................6-31

23-090.............................5-31 23-280.............................5-32 24-068.............................5-34 25-014.............................6-40 25-234.............................6-31
23-092.............................5-31 23-282.............................5-32 24-072.............................5-34 25-016.............................6-40 25-236.............................6-31
23-094.............................5-31 23-284.............................5-32 24-076.............................5-34 25-018.............................6-40 25-238.............................6-31
23-096.............................5-31 23-286.............................5-32 24-084.............................5-34 25-020.............................6-40 25-240.............................6-31
23-098.............................5-31 23-288.............................5-32 24-088.............................5-34 25-022.............................6-40 25-242.............................6-31
23-100.............................5-31 23-290.............................5-32 24-094.............................5-34 25-024.............................6-40 25-244.............................6-31
23-102.............................5-31 23-292.............................5-32 24-096.............................5-34 25-026.............................6-40 25-246.............................6-31
23-104.............................5-31 23-294.............................5-32 24-100.............................5-34 25-028.............................6-40 25-248.............................6-31
23-106.............................5-31 23-296.............................5-32 24-104.............................5-34 25-030.............................6-40 25-252.............................6-31
23-108.............................5-31 23-298.............................5-32 24-108.............................5-34 25-032.............................6-40 25-254.............................6-31
23-110.............................5-31 23-300.............................5-32 24-112.............................5-34 25-108.............................6-39 25-256.............................6-31
23-112.............................5-31 23-302.............................5-32 24-116.............................5-34 25-110.............................6-39 25-258.............................6-31
23-114.............................5-31 23-304.............................5-32 24-120.............................5-34 25-111.............................6-39 25-260.............................6-31
23-116.............................5-31 23-306.............................5-32 24-124.............................5-34 25-112.............................6-39 25-264.............................6-31
23-118.............................5-31 23-308.............................5-32 24-128.............................5-34 25-114.............................6-39 25-266.............................6-31
23-120.............................5-31 23-310.............................5-32 24-132.............................5-34 25-116.............................6-39 25-268.............................6-31
23-122.............................5-31 23-312.............................5-32 24-136.............................5-34 25-118.............................6-39 25-270.............................6-31
23-124.............................5-31 23-314.............................5-32 24-140.............................5-34 25-119.............................6-39 25-272.............................6-31
23-126.............................5-31 23-316.............................5-32 24-144.............................5-34 25-120.............................6-39 25-276.............................6-31
23-128.............................5-31 23-318.............................5-32 24-148.............................5-34 25-122.............................6-39 25-280.............................6-31
23-130.............................5-31 23-320.............................5-32 24-152.............................5-34 25-124.............................6-39 25-282.............................6-31
23-132.............................5-31 23-322.............................5-32 24-156.............................5-34 25-125.............................6-39 25-284.............................6-31
23-134.............................5-31 23-324.............................5-32 24-160.............................5-34 25-126.............................6-39 25-288.............................6-31
23-136.............................5-31 23-326.............................5-32 24-164.............................5-34 25-128.............................6-39 25-308.............................6-32
23-138.............................5-31 23-328.............................5-32 24-168.............................5-34 25-130.............................6-39 25-310.............................6-32
23-140.............................5-31 23-330.............................5-32 24-172.............................5-34 25-132.............................6-39 25-312.............................6-32
23-142.............................5-31 23-332.............................5-32 24-176.............................5-34 25-162.............................6-40 25-314.............................6-32
23-144.............................5-31 23-334.............................5-32 24-184.............................5-34 25-164.............................6-40 25-316.............................6-32
23-148.............................5-31 23-336.............................5-32 24-196.............................5-34 25-166.............................6-40 25-318.............................6-32
23-152.............................5-31 23-338.............................5-32 24-208.............................5-34 25-168.............................6-40 25-320.............................6-32

F-7
 F
Pr oduct Number Index
25-322.............................6-32 25-605.............................6-24 26-046.............................6-65 26-852.............................6-47 27-594.............................6-58
25-324.............................6-32 25-607.............................6-26 26-058.............................6-65 27-596.............................6-58
25-326.............................6-32 25-608.............................6-26 26-064.............................6-65 27-599.............................6-58
25-328.............................6-32 25-609.............................6-23 26-067.............................6-65
27-110 —27-945 27-601.............................6-58
25-330.............................6-32 25-611 ............................6-26 26-079.............................6-65 27-110...............................6-7 27-602.............................6-58
25-332.............................6-32 25-613.............................6-23 26-094.............................6-65 27-111...............................6-7 27-603.............................6-58
25-412.............................6-30 25-616.............................6-23 26-097.............................6-65 27-112...............................6-7 27-604.............................6-58
25-414.............................6-30 25-626.............................6-11 26-106.............................6-65 27-113...............................6-7 27-605.............................6-51
25-416.............................6-30 25-631.............................6-11 26-121.............................6-65 27-114...............................6-7 27-607...............................6-4
25-418.............................6-30 25-637.............................6-11 26-124.............................6-65 27-115...............................6-7 27-608.............................6-51
25-420.............................6-30 25-642.............................6-10 26-133.............................6-65 27-116...............................6-7 27-609...............................6-3
25-422.............................6-30 25-652.............................6-10 26-139.............................6-65 27-143.............................6-54 27-613.............................6-57
25-424.............................6-30 25-655...............................6-9 26-145.............................6-65 27-158.............................6-54 27-614.............................6-57
25-426.............................6-30 25-657...............................6-9 26-151.............................6-65 27-167.............................6-54 27-616.............................6-57
25-428.............................6-30 25-658.............................6-17 26-163.............................6-65 27-194.............................6-54 27-617.............................6-57
25-430.............................6-30 25-661...............................6-2 26-166.............................6-65 27-264.............................6-56 27-619.............................6-57

Pr oduct Number Index

25-432.............................6-30 25-662...............................6-2 26-169.............................6-65 27-268.............................6-56 27-620.............................6-57
25-458.............................6-35 25-667...............................6-2 26-172.............................6-65 27-334.............................6-55 27-622.............................6-57
25-460.............................6-35 25-671...............................6-8 26-178.............................6-65 27-343.............................6-55 27-624.............................6-57
25-462.............................6-35 25-675...............................6-8 26-187.............................6-65 27-358.............................6-55 27-626.............................6-57
25-464.............................6-35 25-677.............................6-18 26-190.............................6-65 27-367.............................6-55 27-628.............................6-57
25-466.............................6-35 25-680.............................6-18 26-199.............................6-65 27-379.............................6-55 27-635.............................6-50
25-468.............................6-35 25-681.............................6-18 26-202.............................6-65 27-394.............................6-55 27-643.............................6-67
25-470.............................6-35 25-682.............................6-17 26-273.............................6-59 27-397.............................6-55 27-658.............................6-67
25-472.............................6-35 25-685.............................6-16 26-282.............................6-59 27-406.............................6-55 27-663.............................6-58
25-474.............................6-35 25-689.............................6-16 26-543.............................6-53 27-424.............................6-55 27-664.............................6-58
25-476.............................6-35 25-692.............................6-29 26-558.............................6-53 27-451.............................6-55 27-665.............................6-58
25-478.............................6-35 25-694.............................6-29 26-567.............................6-53 27-466.............................6-55 27-667.............................6-67
25-480.............................6-35 25-696.............................6-29 26-579.............................6-53 27-469.............................6-55 27-679.............................6-67
25-482.............................6-35 25-808...............................6-5 26-643.............................6-52 27-475.............................6-55 27-694.............................6-67
25-484.............................6-35 25-810...............................6-5 26-658.............................6-52 27-481.............................6-55 27-704...............................6-3
25-486.............................6-35 25-811...............................6-5 26-667.............................6-52 27-508...............................6-6 27-708...............................6-3
25-488.............................6-35 25-812...............................6-5 26-679.............................6-52 27-509...............................6-6 27-724.............................6-67
25-490.............................6-35 25-814...............................6-5 26-697.............................6-52 27-510...............................6-6 27-751.............................6-67
25-508.............................6-46 25-816...............................6-5 26-706.............................6-52 27-511...............................6-6 27-768.............................6-61
25-510.............................6-46 25-818...............................6-5 26-724.............................6-52 27-512...............................6-6 27-770.............................6-61
25-512.............................6-46 25-820...............................6-5 26-733.............................6-52 27-513...............................6-6 27-812.............................6-68
25-514.............................6-46 25-822...............................6-5 26-751.............................6-52 27-514...............................6-6 27-814.............................6-68
25-516.............................6-46 25-824...............................6-5 26-754.............................6-52 27-515...............................6-6 27-816.............................6-68
25-518.............................6-46 26-763.............................6-52 27-516...............................6-6 27-818.............................6-68
25-520.............................6-46 26-766.............................6-52 27-517...............................6-6 27-820.............................6-68
25-522.............................6-46
26-007 —26-852 26-769.............................6-52 27-518...............................6-6 27-822.............................6-68
25-524.............................6-46 26-007.............................6-65 26-775.............................6-52 27-519...............................6-6 27-824.............................6-68
25-526.............................6-46 26-022.............................6-65 26-778.............................6-52 27-520...............................6-6 27-826.............................6-68
25-528.............................6-46 26-031.............................6-65 26-793.............................6-52 27-570.............................6-49 27-828.............................6-68
25-600.............................6-24 26-034.............................6-65 26-799.............................6-52 27-588.............................6-58 27-830.............................6-68
25-602.............................6-24 26-043.............................6-65 26-849.............................6-47 27-591.............................6-58 27-832.............................6-68

F-8
 F
Product Number Index
27-834.............................6-68 28-052.............................6-76 28-442.............................6-71 29-452.............................1-13 30-240.............................6-37
27-836.............................6-68 28-056.............................6-76 28-454.............................6-75 29-454.............................1-13 30-242.............................6-37
27-840.............................6-68 28-060.............................6-76 28-456.............................6-75 29-456.............................1-13 30-244.............................6-37
27-844.............................6-68 28-064.............................6-76 28-458.............................6-75 29-458.............................1-13 30-246.............................6-37
27-846.............................6-68 28-068.............................6-76 28-460.............................6-75 29-460.............................1-13 30-248.............................6-37
27-848.............................6-68 28-072.............................6-76 28-462.............................6-75 29-462.............................1-13 30-252.............................6-37
27-852.............................6-68 28-076.............................6-76 28-465.............................6-75 29-464.............................1-13 30-254.............................6-37
27-854.............................6-68 28-080.............................6-76 28-850.............................6-74 29-466.............................1-13 30-256.............................6-37
27-856.............................6-68 28-130.............................6-70 28-855.............................6-74 29-468.............................1-13 30-258.............................6-37
27-858.............................6-68 28-135.............................6-70 28-900...............................6-1 29-470.............................1-13 30-260.............................6-37
27-860.............................6-68 28-140.............................6-70 28-901...............................6-1 29-472.............................1-13 30-264.............................6-37
27-864.............................6-68 28-145.............................6-70 29-474.............................1-13 30-266.............................6-37
27-885.............................6-62 28-150.............................6-70 29-476.............................1-13 30-268.............................6-37
27-895.............................6-61 28-153.............................6-64
29-401 —29-476 30-270.............................6-37
27-903.............................6-69 28-155.............................6-64 29-401.............................1-13 30-272.............................6-37
27-904.............................6-69 28-212.............................6-70 29-402.............................1-13 30-108 —30-975 30-276.............................6-37
Pr oduct Number Index

27-906.............................6-69 28-214.............................6-70 29-403.............................1-13 30-108.............................6-45 30-280.............................6-37

27-907.............................6-69 28-216.............................6-70 29-404.............................1-13 30-110.............................6-45 30-282.............................6-37
27-908.............................6-69 28-218.............................6-70 29-405.............................1-13 30-111.............................6-45 30-284.............................6-37
27-909.............................6-69 28-220.............................6-70 29-406.............................1-13 30-112.............................6-45 30-288.............................6-37
27-910.............................6-69 28-222.............................6-70 29-407.............................1-13 30-114.............................6-45 30-308 ............................6-43
27-911.............................6-69 28-224.............................6-70 29-410.............................1-13 30-116.............................6-45 30-310.............................6-43
27-912.............................6-69 28-228.............................6-70 29-411.............................1-13 30-118.............................6-45 30-311.............................6-43
27-914.............................6-69 28-250.............................6-64 29-412.............................1-13 30-120.............................6-45 30-312.............................6-43
27-916.............................6-69 28-312.............................6-73 29-413.............................1-13 30-122.............................6-45 30-314.............................6-43
27-918.............................6-69 28-314.............................6-73 29-414.............................1-13 30-124.............................6-45 30-316.............................6-43
27-920.............................6-69 28-316.............................6-73 29-415.............................1-13 30-126.............................6-45 30-318.............................6-43
27-937.............................6-62 28-318.............................6-73 29-416.............................1-13 30-128.............................6-45 30-320.............................6-43
27-942.............................6-63 28-320.............................6-73 29-418.............................1-13 30-130.............................6-45 30-322.............................6-43
27-943.............................6-63 28-322.............................6-73 29-420.............................1-13 30-132.............................6-45 30-324.............................6-43
27-945.............................6-62 28-324.............................6-73 29-421.............................1-13 30-208.............................6-37 30-326.............................6-43
28-326.............................6-73 29-422.............................1-13 30-210.............................6-37 30-328.............................6-43
28-328.............................6-73 29-424.............................1-13 30-211.............................6-37 30-330.............................6-43
28-024 —28-901 28-330.............................6-73 29-426.............................1-13 30-212.............................6-37 30-332.............................6-43
28-024.............................6-76 28-332.............................6-73 29-428.............................1-13 30-214.............................6-37 30-607.............................6-28
28-028.............................6-76 28-386.............................6-72 29-430.............................1-13 30-216.............................6-37 30-608.............................6-28
28-030.............................6-76 28-404.............................6-75 29-432.............................1-13 30-218.............................6-37 30-631.............................6-22
28-032.............................6-76 28-406.............................6-75 29-434.............................1-13 30-220.............................6-37 30-636.............................6-21
28-034.............................6-76 28-408.............................6-75 29-436.............................1-13 30-222.............................6-37 30-644.............................6-21
28-036.............................6-76 28-410.............................6-75 29-438.............................1-13 30-224.............................6-37 30-734.............................6-67
28-038.............................6-76 28-412.............................6-75 29-440.............................1-13 30-226.............................6-37 30-743.............................6-67
28-040.............................6-76 28-415.............................6-75 29-442.............................1-13 30-228.............................6-37 30-758.............................6-67
28-042.............................6-76 28-418.............................6-75 29-444.............................1-13 30-230.............................6-37 30-767.............................6-67
28-044.............................6-76 28-424.............................6-75 29-446.............................1-13 30-232.............................6-37 30-779.............................6-67
28-046.............................6-76 28-430.............................6-71 29-448.............................1-13 30-234.............................6-37 30-794.............................6-67
28-048.............................6-76 28-435.............................6-71 29-450.............................1-13 30-236.............................6-37 30-797.............................6-67
28-050.............................6-76 28-440.............................6-71 29-451.............................1-13 30-238.............................6-37 30-806.............................6-67

F-9
 F
Pr oduct Number Index
30-824.............................6-67 33-380.............................6-79 34-121.............................6-81
32-495 —32-864 33-034 —33-624
30-851.............................6-67 33-382.............................6-79 34-124.............................6-81
32-495.............................6-78 33-034.............................6-78
30-869.............................6-67 33-384.............................6-79 34-127.............................6-81
32-520.............................6-77 33-036.............................6-78
30-872.............................6-67 33-388.............................6-79 34-130.............................6-81
32-524.............................6-77 33-038.............................6-78
30-896.............................6-67 33-390.............................6-79 34-133.............................6-81
32-528.............................6-77 33-040.............................6-78
30-902.............................6-67 33-394.............................6-79 34-136.............................6-81
32-530.............................6-77 33-042.............................6-78
30-973.............................6-60 33-396.............................6-79 34-151.............................6-81
32-532.............................6-77 33-044.............................6-78
30-975.............................6-60 33-400.............................6-79 34-154.............................6-81
32-534.............................6-77 33-046.............................6-78
33-408.............................6-79 34-157.............................6-81
32-536.............................6-77 33-048.............................6-78
33-412.............................6-79 34-201.............................6-81
31-008 —31-324 32-540.............................6-77 33-052.............................6-78
33-420.............................6-79 34-204.............................6-81
31-008.............................6-83 32-542.............................6-77 33-054.............................6-78
33-424.............................6-79 34-207.............................6-81
31-010.............................6-83 32-546.............................6-77 33-056.............................6-78
33-432.............................6-79 34-210.............................6-81
31-012.............................6-83 32-548.............................6-77 33-058.............................6-78
33-436.............................6-79 34-213.............................6-81
31-014.............................6-83 32-552.............................6-77 33-060.............................6-78
33-444.............................6-79 34-216.............................6-81
31-016.............................6-83 32-558.............................6-77 33-062.............................6-78
33-448.............................6-79 34-219.............................6-81

Pr oduct Number Index

31-018.............................6-83 32-560.............................6-77 33-064.............................6-78
33-452.............................6-79 34-222.............................6-81
31-022.............................6-83 32-564.............................6-77 33-068.............................6-78
33-460.............................6-79 34-225.............................6-81
31-024.............................6-83 32-728.............................6-77 33-070.............................6-78
33-468.............................6-79 34-228.............................6-81
31-028.............................6-83 32-730.............................6-77 33-072.............................6-78
33-472.............................6-79 34-231.............................6-81
31-030.............................6-83 32-732.............................6-77 33-074.............................6-78
33-476.............................6-79 34-234.............................6-81
31-032.............................6-83 32-734.............................6-77 33-076.............................6-78
33-484.............................6-79 34-237.............................6-81
31-034.............................6-83 32-736.............................6-77 33-080.............................6-78
33-492.............................6-79 34-240.............................6-81
31-036.............................6-83 32-740.............................6-77 33-082.............................6-78
33-534.............................6-80 34-243.............................6-81
31-040.............................6-83 32-742.............................6-77 33-084.............................6-78
33-540.............................6-80 34-301.............................6-82
31-044.............................6-83 32-746.............................6-77 33-088.............................6-78
33-546.............................6-80 34-305.............................6-82
31-046.............................6-83 32-748.............................6-77 33-092.............................6-78
33-552.............................6-80 34-307.............................6-82
31-048.............................6-83 32-752.............................6-77 33-094.............................6-78
33-558.............................6-80 34-310.............................6-82
31-052.............................6-83 32-758.............................6-77 33-096.............................6-78
33-564.............................6-80 34-313.............................6-82
31-058.............................6-83 32-760.............................6-77 33-100.............................6-78
33-570.............................6-80 34-351.............................6-82
31-064.............................6-83 32-764.............................6-77 33-340.............................6-79
33-576.............................6-80 34-354.............................6-82
31-070.............................6-83 32-820.............................6-78 33-342.............................6-79
33-582.............................6-80 34-358.............................6-82
31-072.............................6-83 32-822.............................6-78 33-344.............................6-79
33-588.............................6-80 34-361.............................6-82
31-076.............................6-83 32-824.............................6-78 33-346.............................6-79
33-594.............................6-80 34-363.............................6-82
31-078.............................6-83 32-828.............................6-78 33-348.............................6-79
33-600.............................6-80 34-366.............................6-82
31-082.............................6-83 32-830.............................6-78 33-352.............................6-79
33-612.............................6-80 34-376.............................6-82
31-084.............................6-83 32-832.............................6-78 33-354.............................6-79
33-624.............................6-80 34-404.............................6-75
31-088.............................6-83 32-834.............................6-78 33-356.............................6-79
34-406.............................6-75
31-094.............................6-83 32-836.............................6-78 33-358.............................6-79
34-408.............................6-75
31-096.............................6-83 32-840.............................6-78 33-360.............................6-79 34-101 —34-850 34-410.............................6-75
31-314.............................6-82 32-842.............................6-78 33-364.............................6-79 34-101.............................6-81 34-412.............................6-75
31-316.............................6-82 32-846.............................6-78 33-366.............................6-79 34-104.............................6-81 34-415.............................6-75
31-318.............................6-82 32-848.............................6-78 33-368.............................6-79 34-107.............................6-81 34-418.............................6-75
31-320.............................6-82 32-852.............................6-78 33-370.............................6-79 34-110.............................6-81 34-850.............................6-74
31-322.............................6-82 32-858.............................6-78 33-372.............................6-79 34-113.............................6-81
31-324.............................6-82 32-860.............................6-78 33-376.............................6-79 34-116.............................6-81
32-864.............................6-78 33-378.............................6-79 34-119.............................6-81

F-10
 F
Product Number Index
38-009.............................4-18 38-218.............................4-19 38-856.............................4-20 39-125.............................4-33
37-004 —37-713
38-010.............................4-18 38-219.............................4-19 38-857.............................4-20 39-126.............................4-33
37-004...............................4-5
38-011.............................4-18 38-220.............................4-19 38-858.............................4-20 39-127.............................4-33
37-005...............................4-5
38-012.............................4-18 38-221.............................4-19 38-859.............................4-20 39-128.............................4-33
37-006...............................4-5
38-013.............................4-18 38-222.............................4-19 38-861.............................4-20 39-129.............................4-33
37-007...............................4-5
38-014.............................4-18 38-223.............................4-19 38-862.............................4-20 39-130.............................4-33
37-008...............................4-5
38-015.............................4-18 38-226.............................4-19 39-131.............................4-33
37-009...............................4-5
38-016.............................4-18 38-306.............................4-19 39-132.............................4-33
37-010...............................4-5
38-017.............................4-18 38-307.............................4-19
39-010 —39-762 39-136.............................4-33
37-011...............................4-5 39-010.............................4-33
38-018.............................4-18 38-308.............................4-19 39-310.............................4-34
37-012...............................4-5 39-011.............................4-33
38-019.............................4-18 38-309.............................4-19 39-311.............................4-34
37-013...............................4-5 39-012.............................4-33
38-020.............................4-18 38-310.............................4-19 39-312.............................4-34
37-014...............................4-5 39-013.............................4-33
38-021.............................4-18 38-311.............................4-19 39-313.............................4-34
37-015...............................4-5 39-014.............................4-33
38-022.............................4-18 38-312.............................4-19 39-314.............................4-34
37-081...............................4-6 39-015.............................4-33
38-023.............................4-18 38-313.............................4-19 39-315.............................4-34
37-083...............................4-6 39-016.............................4-33
38-026.............................4-18 38-314.............................4-19 39-316.............................4-34
Pr oduct Number Index

37-105...............................4-6 39-017.............................4-33
38-106.............................4-18 38-315.............................4-19 39-317.............................4-34
37-106...............................4-6 39-018.............................4-33
38-107.............................4-18 38-316.............................4-19 39-318.............................4-34
37-107...............................4-6 39-019.............................4-33
38-108.............................4-18 38-317.............................4-19 39-319.............................4-34
37-108...............................4-6 39-020.............................4-33
38-109.............................4-18 38-318.............................4-19 39-320.............................4-34
37-109...............................4-6 39-021.............................4-33
38-110.............................4-18 38-319.............................4-19 39-321.............................4-34
37-110...............................4-6 39-022.............................4-33
38-111.............................4-18 38-320.............................4-19 39-322.............................4-34
37-111...............................4-6 39-023.............................4-33
38-112.............................4-18 38-321.............................4-19 39-323.............................4-34
37-112...............................4-6 39-024.............................4-33
38-113.............................4-18 38-322.............................4-19 39-324.............................4-34
37-113...............................4-6 39-025.............................4-33
38-114.............................4-18 38-323.............................4-19 39-325.............................4-34
37-114...............................4-6 39-026.............................4-33
38-115.............................4-18 38-326.............................4-19 39-326.............................4-34
37-204...............................4-5 39-027.............................4-33
38-116.............................4-18 38-705.............................4-20 39-327.............................4-34
37-205...............................4-5 39-028.............................4-33
38-117.............................4-18 38-707.............................4-20 39-328.............................4-34
37-206...............................4-5 39-029.............................4-33
38-118.............................4-18 38-709.............................4-20 39-329.............................4-34
37-207...............................4-5 39-030.............................4-33
38-119.............................4-18 38-711.............................4-20 39-330.............................4-34
37-208...............................4-5 39-032.............................4-33
38-120.............................4-18 38-712.............................4-20 39-332.............................4-34
37-209...............................4-5 39-036.............................4-33
38-121.............................4-18 38-713.............................4-20 39-711.............................4-34
37-210...............................4-5 39-110.............................4-33
38-122.............................4-18 38-714.............................4-20 39-713.............................4-34
37-211...............................4-5 39-111.............................4-33
38-123.............................4-18 38-715.............................4-20 39-715.............................4-34
37-703...............................4-6 39-112.............................4-33
38-126.............................4-18 38-747.............................4-20 39-717.............................4-34
37-704...............................4-6 39-113.............................4-33
38-206.............................4-19 38-749.............................4-20 39-719.............................4-34
37-705...............................4-6 39-114.............................4-33
38-207.............................4-19 38-751.............................4-20 39-722.............................4-34
37-707...............................4-6 39-115.............................4-33
38-208.............................4-19 38-752.............................4-20 39-724.............................4-34
37-709...............................4-6 39-116.............................4-33
38-209.............................4-19 38-753.............................4-20 39-751.............................4-34
37-711...............................4-6 39-117.............................4-33
38-210.............................4-19 38-754.............................4-20 39-753.............................4-34
37-713...............................4-6 39-118.............................4-33
38-211.............................4-19 38-755.............................4-20 39-755.............................4-34
38-212.............................4-19 38-850.............................4-20 39-119.............................4-33 39-757.............................4-34
38-213.............................4-19 38-851.............................4-20 39-120.............................4-33 39-759.............................4-34
38-006 —38-862
38-214.............................4-19 38-852.............................4-20 39-121.............................4-33 39-762.............................4-34
38-006.............................4-18
38-215.............................4-19 38-853.............................4-20 39-122.............................4-33
38-007.............................4-18
38-216.............................4-19 38-854.............................4-20 39-123.............................4-33
38-008.............................4-18
38-217.............................4-19 38-855.............................4-20 39-124.............................4-33

F-11
 F
Pr oduct Number Index
44-005.............................2-26 44-355.............................3-37 46-707.............................5-14
40-119 —40-360 46-110 —46-910
44-006.............................2-26 44-360.............................3-38 46-708.............................5-14
40-119.............................4-41 46-110.............................5-15
44-007.............................2-26 44-365.............................3-38 46-709.............................5-14
40-120.............................4-41 46-111.............................5-15
44-010.............................2-27 44-370.............................3-38 46-710.............................5-14
40-121.............................4-41 46-112.............................5-15
44-011.............................2-27 44-375.............................3-39 46-711.............................5-14
40-122.............................4-41 46-113.............................5-15
44-012.............................2-27 44-380.............................3-39 46-712.............................5-14
40-123.............................4-41 46-114.............................5-15
44-015.............................2-28 44-385.............................3-39 46-713.............................5-14
40-124.............................4-41 46-115.............................5-15
44-016.............................2-28 44-500.............................3-52 46-714.............................5-14
40-125.............................4-41 46-116.............................5-15
44-017.............................2-28 44-505.............................3-52 46-715.............................5-14
40-126.............................4-41 46-117.............................5-15
44-020.............................2-29 44-510.............................3-53 46-716.............................5-14
40-127.............................4-41 46-118.............................5-15
44-021.............................2-29 44-515.............................3-53 46-717.............................5-14
40-128.............................4-41 46-119.............................5-15
44-022.............................2-29 44-516A ..........................3-54 46-718.............................5-14
40-129.............................4-41 46-308.............................5-15
44-025.............................2-30 44-520.............................3-54 46-719.............................5-14
40-130.............................4-41 46-309.............................5-15
44-026.............................2-30 44-525.............................3-55 46-720.............................5-14
40-132.............................4-41 46-310.............................5-15
44-027.............................2-30 44-530.............................3-56 46-721.............................5-14
40-135.............................4-41 46-311.............................5-15
44-030.............................2-31 44-535.............................3-56 46-722.............................5-14

Pr oduct Number Index

40-136.............................4-41 46-312.............................5-15
44-031.............................2-31 44-540.............................3-56 46-723.............................5-14
40-138.............................4-41 46-313.............................5-15
44-035.............................2-32 44-545.............................3-57 46-724.............................5-14
40-141.............................4-41 46-314.............................5-15
44-036.............................2-32 44-546.............................3-57 46-890...............................5-3
40-142.............................4-41 46-315.............................5-15
44-040.............................2-33 44-550.............................3-57 46-891...............................5-3
40-146.............................4-41 46-316.............................5-15
44-041.............................2-33 44-555.............................3-58 46-898...............................5-3
40-150.............................4-41 46-317.............................5-15
44-045.............................2-34 44-560.............................3-58 46-910...............................5-3
40-154.............................4-41 46-318.............................5-15
44-046.............................2-34 44-565.............................3-58
40-155.............................4-41 46-319.............................5-15
44-047.............................2-34 44-700.............................3-62
40-158.............................4-41
44-200.............................3-12 44-705.............................3-62
46-320.............................5-15 47-008 —47-913
40-160.............................4-41 46-321.............................5-15 47-008.............................5-20
44-205.............................3-13 44-710.............................3-63
40-319.............................4-41 46-322.............................5-15 47-009.............................5-20
44-210.............................3-15 44-715.............................3-63
40-322.............................4-41 46-606.............................5-14 47-010.............................5-20
44-215.............................3-16 44-720.............................3-63
40-323.............................4-41 46-607.............................5-14 47-011.............................5-20
44-220.............................3-16
40-324.............................4-41 46-608.............................5-14 47-012.............................5-20
44-225.............................3-17
40-327.............................4-41
44-300.............................3-32
45-004 —45-890 46-609.............................5-14 47-013.............................5-20
40-330.............................4-41 45-004.............................5-10 46-610.............................5-14 47-014.............................5-20
44-305.............................3-32
40-332.............................4-41 45-005.............................5-10 46-611.............................5-14 47-015.............................5-20
44-310.............................3-33
40-335.............................4-41 45-006.............................5-10 46-612.............................5-14 47-016.............................5-20
44-315.............................3-34
40-336.............................4-41 45-007.............................5-10 46-613.............................5-14 47-017.............................5-20
44-320.............................3-35
40-338.............................4-41 45-008.............................5-10 46-614.............................5-14 47-018.............................5-20
44-321A ..........................3-14
40-341.............................4-41 45-009.............................5-10 46-615.............................5-14 47-019.............................5-20
44-322A ..........................3-16
40-346.............................4-41 45-010.............................5-10 46-616.............................5-14 47-020.............................5-20
44-323A ..........................3-15
40-350.............................4-41 45-011.............................5-10 46-617.............................5-14 47-021.............................5-20
44-324A ..........................3-36
40-355.............................4-41 45-012.............................5-10 46-618.............................5-14 47-022.............................5-20
44-325.............................3-35
40-360.............................4-41 45-013.............................5-10 46-619.............................5-14 47-023.............................5-20
44-326A ..........................3-34
45-014.............................5-10 46-620.............................5-14 47-024.............................5-20
44-330.............................3-36
45-015.............................5-10 46-621.............................5-14 47-025.............................5-20
44-335.............................3-36
44-000 —44-720 46-622.............................5-14
44-340.............................3-36 45-083.............................5-10 47-026.............................5-20
44-000.............................2-25 46-623.............................5-14
44-345.............................3-37 45-890 ..............................5-1 47-027.............................5-20
44-001.............................2-25 46-624.............................5-14
44-346.............................3-37 47-028.............................5-20
44-002.............................2-25 46-706.............................5-14
44-350.............................3-37 47-029.............................5-20

F-12
 F
Product Number Index
47-030.............................5-20 47-311.............................5-21 48-219.............................5-26 52-009.............................6-42 52-169.............................6-42
47-032.............................5-20 47-312.............................5-21 48-221.............................5-26 52-010.............................6-42 52-206.............................6-33
47-033.............................5-20 47-313.............................5-21 48-222.............................5-26 52-011.............................6-42 52-207.............................6-33
47-034.............................5-20 47-314.............................5-21 48-223.............................5-26 52-012.............................6-42 52-208.............................6-33
47-035.............................5-20 47-315.............................5-21 48-224.............................5-26 52-013.............................6-42 52-209.............................6-33
47-036.............................5-20 47-316.............................5-21 48-226.............................5-26 52-014.............................6-42 52-210.............................6-33
47-110.............................5-21 47-317.............................5-21 48-227.............................5-26 52-015.............................6-42 52-211.............................6-33
47-111.............................5-21 47-318.............................5-21 48-230.............................5-26 52-016.............................6-42 52-212.............................6-33
47-112.............................5-21 47-319.............................5-21 48-232.............................5-26 52-017.............................6-42 52-213.............................6-33
47-113.............................5-21 47-320.............................5-21 48-233.............................5-26 52-018.............................6-42 52-214.............................6-33
47-114.............................5-21 47-321.............................5-21 48-235.............................5-26 52-019.............................6-42 52-215.............................6-33
47-115.............................5-21 47-322.............................5-21 48-236.............................5-26 52-020.............................6-42 52-216.............................6-33
47-116.............................5-21 47-323.............................5-21 48-238.............................5-26 52-021.............................6-42 52-217.............................6-33
47-117.............................5-21 47-324.............................5-21 48-241.............................5-26 52-022.............................6-42 52-218.............................6-33
47-118.............................5-21 47-330.............................5-21 48-243.............................5-26 52-023.............................6-42 52-219.............................6-33
47-119.............................5-21 47-332.............................5-21 48-719.............................5-26 52-024.............................6-42 52-220.............................6-33
Pr oduct Number Index

47-121.............................5-21 47-893...............................5-6 48-722.............................5-26 52-025.............................6-42 52-221.............................6-33

47-122.............................5-21 47-897...............................5-6 48-724.............................5-26 52-083.............................6-42 52-222.............................6-33
47-124.............................5-21 47-913...............................5-7 48-725.............................5-26 52-106.............................6-41 52-223.............................6-33
47-208.............................5-20 48-726.............................5-26 52-107.............................6-41 52-224.............................6-33
47-209.............................5-20 48-893...............................5-8 52-108.............................6-41 52-225.............................6-33
47-210.............................5-20
48-017—48-893 52-109.............................6-41 52-226.............................6-33
47-211.............................5-20 48-017.............................5-26 52-110.............................6-41 52-227.............................6-33
47-212.............................5-20 48-019.............................5-26 49-019 —49-065 52-111.............................6-41 52-228.............................6-33
47-213.............................5-20 48-020.............................5-26 49-019.............................5-29 52-112.............................6-41 52-229.............................6-33
47-214.............................5-20 48-021.............................5-26 49-022.............................5-29 52-113.............................6-41 52-230.............................6-33
47-215.............................5-20 48-022.............................5-26 49-024.............................5-29 52-114.............................6-41 52-232.............................6-33
47-216.............................5-20 48-023.............................5-26 49-027.............................5-29 52-115.............................6-41 52-236.............................6-33
47-217.............................5-20 48-024.............................5-26 49-028.............................5-29 52-116.............................6-41 52-241.............................6-33
47-218.............................5-20 48-025.............................5-26 49-030.............................5-29 52-117.............................6-41 52-246.............................6-33
47-219.............................5-20 48-026.............................5-26 49-032.............................5-29 52-118.............................6-41 52-250.............................6-33
47-220.............................5-20 48-027.............................5-26 49-033.............................5-29 52-119.............................6-41 52-255.............................6-33
47-221.............................5-20 48-028.............................5-26 49-036.............................5-29 52-120.............................6-41 52-260.............................6-33
47-222.............................5-20 48-030.............................5-26 49-041.............................5-29 52-121.............................6-41 52-265.............................6-33
47-223.............................5-20 48-031.............................5-26 49-046.............................5-29 52-122.............................6-41 52-270.............................6-33
47-224.............................5-20 48-032.............................5-26 49-050.............................5-29 52-123.............................6-41 52-306.............................6-34
47-225.............................5-20 48-033.............................5-26 49-055.............................5-29 52-124.............................6-41 52-307.............................6-34
47-226.............................5-20 48-034.............................5-26 49-060.............................5-29 52-125.............................6-41 52-308.............................6-34
47-227.............................5-20 48-035.............................5-26 49-065.............................5-29 52-160.............................6-42 52-309.............................6-34
47-228.............................5-20 48-036.............................5-26 52-161.............................6-42 52-310.............................6-34
47-229.............................5-20 48-037.............................5-26 52-162.............................6-42 52-311.............................6-34
48-038.............................5-26
52-004 —52-819
47-230.............................5-20 52-163.............................6-42 52-312.............................6-34
48-041.............................5-26 52-004.............................6-42
47-232.............................5-20 52-164.............................6-42 52-313.............................6-34
48-042.............................5-26 52-005.............................6-42
47-234.............................5-20 52-165.............................6-42 52-314.............................6-34
48-043.............................5-26 52-006.............................6-42
47-235.............................5-20 52-166.............................6-42 52-315.............................6-34
48-046.............................5-26 52-007.............................6-42
47-236.............................5-20 52-167.............................6-42 52-316.............................6-34
48-050.............................5-26 52-008.............................6-42
47-310.............................5-21 52-168.............................6-42 52-317.............................6-34

F-13
 F
Pr oduct Number Index
52-318.............................6-34 52-627.............................6-15 53-106.............................6-66 54-385.............................6-56 54-808...............................6-5
52-319.............................6-34 52-630.............................6-14 53-115.............................6-66 54-391.............................6-56 54-809...............................6-5
52-410.............................6-32 52-631.............................6-14 53-119.............................6-66 54-406.............................6-56 54-810...............................6-5
52-411.............................6-32 52-632.............................6-14 53-127.............................6-66 54-415.............................6-56 54-811...............................6-5
52-412.............................6-32 52-634.............................6-13 53-142.............................6-66 54-418.............................6-56 54-812...............................6-5
52-413.............................6-32 52-638.............................6-13 53-145.............................6-66 54-419.............................6-56 54-813...............................6-5
52-414.............................6-32 52-644.............................6-12 53-162.............................6-66 54-433.............................6-56 54-814...............................6-5
52-415.............................6-32 52-667...............................6-2 53-175.............................6-66 54-445.............................6-56 54-815...............................6-5
52-416.............................6-32 52-671.............................6-12 53-270.............................6-60 54-462.............................6-56 54-816...............................6-5
52-417.............................6-32 52-677.............................6-20 53-273.............................6-59 54-475.............................6-56 54-817...............................6-5
52-418.............................6-32 52-679.............................6-20 53-616.............................6-54 54-504...............................6-4 54-818...............................6-5
52-419.............................6-32 52-682.............................6-19 53-622.............................6-54 54-508...............................6-6 54-819...............................6-5
52-420.............................6-32 52-684.............................6-19 53-634.............................6-54 54-509...............................6-6 54-902.............................6-69
52-421.............................6-32 52-686.............................6-19 53-652.............................6-54 54-510...............................6-6 54-906.............................6-69
52-456.............................6-36 52-806...............................6-5 53-661.............................6-54 54-511...............................6-6 54-907.............................6-69
52-457.............................6-36 52-807...............................6-5 53-667.............................6-54 54-512...............................6-6 54-908.............................6-69

Pr oduct Number Index

52-458.............................6-36 52-808...............................6-5 53-685.............................6-54 54-513...............................6-6 54-909.............................6-69
52-459.............................6-36 52-809...............................6-5 53-691.............................6-54 54-514...............................6-6 54-910.............................6-69
52-460.............................6-36 52-810...............................6-5 53-715.............................6-54 54-515...............................6-6 54-911.............................6-69
52-461.............................6-36 52-811...............................6-5 53-719.............................6-54 54-516...............................6-6 54-941.............................6-63
52-462.............................6-36 52-812...............................6-5 53-727.............................6-54 54-517...............................6-6 54-950...............................6-1
52-463.............................6-36 52-813...............................6-5 53-742.............................6-54 54-518...............................6-6
52-464.............................6-36 52-814...............................6-5 53-762.............................6-54 54-519...............................6-6
52-465.............................6-36 52-815...............................6-5 53-775.............................6-54 54-520...............................6-6
55-215 —55-387
52-466.............................6-36 52-816...............................6-5 53-841.............................6-48 54-521...............................6-6 55-215.............................6-71
52-467.............................6-36 52-817...............................6-5 53-843.............................6-48 54-522...............................6-6 55-216.............................6-71
52-468.............................6-36 52-818...............................6-5 53-845.............................6-48 54-523...............................6-6 55-217.............................6-71
52-469.............................6-36 52-819...............................6-5 54-571.............................6-49 55-218.............................6-71
52-470.............................6-36 54-573.............................6-49 55-307.............................6-73
52-471.............................6-36
54-110 —54-950 54-587.............................6-58 55-308.............................6-73
52-472.............................6-36
53-009 —53-845 54-110...............................6-7 54-590.............................6-58 55-309.............................6-73
52-473.............................6-36 53-009.............................6-66 54-111...............................6-7 54-593.............................6-58 55-310.............................6-73
52-474.............................6-36 53-016.............................6-66 54-112...............................6-7 54-596.............................6-58 55-311.............................6-73
52-475.............................6-36 53-019.............................6-66 54-113...............................6-7 54-599.............................6-58 55-312.............................6-73
52-476.............................6-36 53-022.............................6-66 54-114...............................6-7 54-602.............................6-58 55-313.............................6-73
52-477.............................6-36 53-025.............................6-66 54-115...............................6-7 54-605.............................6-58 55-314.............................6-73
52-478.............................6-36 53-034.............................6-66 54-116...............................6-7 54-607...............................6-4 55-315.............................6-73
52-479.............................6-36 53-046.............................6-66 54-117...............................6-7 54-608.............................6-51 55-316.............................6-73
52-480.............................6-36 53-052.............................6-66 54-118...............................6-7 54-609...............................6-3 55-317.............................6-73
52-482.............................6-36 53-055.............................6-66 54-119...............................6-7 54-637.............................6-57 55-318.............................6-73
52-600.............................6-25 53-061.............................6-66 54-322.............................6-56 54-640.............................6-57 55-319.............................6-73
52-601.............................6-25 53-064.............................6-66 54-334.............................6-56 54-643.............................6-57 55-321.............................6-73
52-602.............................6-27 53-067.............................6-66 54-352.............................6-56 54-646.............................6-57 55-322.............................6-73
52-605.............................6-25 53-082.............................6-66 54-355.............................6-56 54-649.............................6-57 55-323.............................6-73
52-606.............................6-27 53-085.............................6-66 54-361.............................6-56 54-652.............................6-57 55-324.............................6-73
52-619.............................6-25 53-091.............................6-66 54-364.............................6-56 54-655.............................6-57 55-386.............................6-72
52-623.............................6-15 53-096.............................6-66 54-367.............................6-56 54-668.............................6-50 55-387.............................6-72

F-14
 F
Product Number Index
56-412.............................6-44 64-032...............................7-4 64-314...............................7-9 64-700.............................7-10
56-206 —56-628
56-413.............................6-44 64-036...............................7-4 64-315...............................7-9 64-710.............................7-10
56-206.............................6-38
56-414.............................6-44 64-038...............................7-4 64-316...............................7-9 64-713.............................7-10
56-207.............................6-38
56-415.............................6-44 64-041...............................7-4 64-317...............................7-9 64-715.............................7-10
56-208.............................6-38
56-416.............................6-44 64-042...............................7-4 64-318...............................7-9 64-718.............................7-10
56-209.............................6-38
56-417.............................6-44 64-046...............................7-4 64-319...............................7-9 64-720...............................7-8
56-210.............................6-38
56-418.............................6-44 64-049...............................7-4 64-320...............................7-9 64-730...............................7-8
56-211.............................6-38
56-419.............................6-44 64-077...............................7-4 64-321...............................7-9 64-740...............................7-8
56-212.............................6-38
56-420.............................6-44 64-078...............................7-4 64-322...............................7-9 64-750.............................7-10
56-213.............................6-38
56-421.............................6-44 64-081...............................7-4 64-323...............................7-9 64-752.............................7-10
56-214.............................6-38
56-422.............................6-44 64-082...............................7-4 64-324...............................7-9 64-753.............................7-10
56-215.............................6-38
56-423.............................6-44 64-084...............................7-4 64-325...............................7-9 64-754.............................7-10
56-216.............................6-38
56-424.............................6-44 64-085...............................7-4 64-326...............................7-9 64-755.............................7-10
56-217.............................6-38
56-425.............................6-44 64-086...............................7-4 64-327...............................7-9 64-756.............................7-10
56-218.............................6-38
56-611.............................6-28 64-089...............................7-4 64-328...............................7-9 64-757.............................7-10
56-219.............................6-38
56-628.............................6-22 64-091...............................7-4 64-329...............................7-9 64-758.............................7-10
Pr oduct Number Index

56-220.............................6-38
64-092...............................7-4 64-330...............................7-9 64-770.............................7-10
56-221.............................6-38
64-094...............................7-5 64-331...............................7-9 64-771.............................7-10
56-222.............................6-38 59-032 —59-380 64-095...............................7-5 64-332...............................7-9 64-772.............................7-10
56-223.............................6-38 59-032.............................6-79 64-099...............................7-5 64-333...............................7-9 64-773.............................7-10
56-224.............................6-38 59-036.............................6-79 64-146...............................7-4 64-334...............................7-9 64-774.............................7-10
56-306.............................6-45 59-041.............................6-79 64-152...............................7-5 64-335...............................7-9 64-775.............................7-10
56-307.............................6-45 59-046.............................6-79 64-154...............................7-5 64-336...............................7-9 64-776.............................7-10
56-308.............................6-45 59-050.............................6-79 64-156...............................7-5 64-337...............................7-9 64-777.............................7-10
56-309.............................6-45 59-055.............................6-79 64-158...............................7-5 64-338...............................7-9 64-778.............................7-10
56-310.............................6-45 59-060.............................6-79 64-186...............................7-4 64-339...............................7-9 64-779.............................7-10
56-311.............................6-45 59-065.............................6-79 64-212...............................7-5 64-340...............................7-9 64-780.............................7-10
56-312.............................6-45 59-070.............................6-79 64-221...............................7-5 64-341...............................7-9 64-830.............................7-11
56-313.............................6-45 59-075.............................6-79 64-226...............................7-5 64-342...............................7-9 64-832.............................7-11
56-314.............................6-45 59-080.............................6-79 64-236...............................7-5 64-352...............................7-7 64-833.............................7-11
56-315.............................6-45 59-332.............................6-80 64-238...............................7-5 64-355...............................7-7 64-834.............................7-11
56-316 ............................6-45 59-336.............................6-80 64-293...............................7-4 64-358...............................7-7 64-836.............................7-11
56-317.............................6-45 59-341.............................6-80 64-295...............................7-4 64-402...............................7-7 64-840.............................7-12
56-318.............................6-45 59-346.............................6-80 64-297...............................7-4 64-405...............................7-7 64-842.............................7-12
56-319.............................6-45 59-350.............................6-80 64-298...............................7-4 64-407...............................7-7 64-844.............................7-12
56-320.............................6-45 59-355.............................6-80 64-302...............................7-7 64-452...............................7-7 64-850.............................7-11
56-321.............................6-45 59-360.............................6-80 64-303...............................7-9 64-455...............................7-7 64-851.............................7-12
56-322.............................6-45 59-365.............................6-80 64-304...............................7-9 64-458...............................7-7 64-852.............................7-11
56-323.............................6-45 59-370.............................6-80 64-305...............................7-9 64-502...............................7-7 64-853.............................7-12
56-324.............................6-45 59-375.............................6-80 64-306...............................7-9 64-505...............................7-8 64-854.............................7-12
56-325.............................6-45 59-380.............................6-80 64-307...............................7-9 64-534...............................7-2 64-902...............................7-5
56-406.............................6-44
64-308...............................7-9 64-544...............................7-2 64-905...............................7-5
56-407.............................6-44
64-309...............................7-9 64-623.............................7-13 64-931...............................7-4
56-408.............................6-44 64-002 —64-999
64-310...............................7-9 64-633.............................7-13 64-932...............................7-4
56-409.............................6-44 64-002...............................7-5
64-311...............................7-9 64-637.............................7-13 64-938...............................7-4
56-410.............................6-44 64-005...............................7-5
64-312...............................7-9 64-647.............................7-13 64-941...............................7-4
56-411.............................6-44 64-031...............................7-4
64-313...............................7-9 64-657.............................7-13 64-942...............................7-4

F-15
 F
Pr oduct Number Index
64-946...............................7-4 66-218...............................8-8 66-510.............................8-14 66-716.............................8-19 66-843A ..........................8-17
64-949...............................7-4 66-220...............................8-8 66-521.............................8-15 66-731.............................8-19 66-845.............................8-17
64-954...............................7-4 66-221...............................8-8 66-524.............................8-15 66-733.............................8-19 66-847.............................8-18
64-958...............................7-4 66-223...............................8-8 66-526.............................8-15 66-734.............................8-19 66-847A ..........................8-18
64-981...............................7-4 66-224...............................8-8 66-527.............................8-15 66-735.............................8-19 66-848.............................8-18
64-982...............................7-4 66-226...............................8-8 66-528.............................8-15 66-736.............................8-19 66-921.............................8-22
64-984...............................7-4 66-227...............................8-8 66-530.............................8-15 66-737.............................8-19 66-924.............................8-22
64-985...............................7-4 66-230.............................8-10 66-541.............................8-14 66-738.............................8-19 66-927.............................8-22
64-986...............................7-4 66-232.............................8-10 66-544.............................8-14 66-743.............................8-16 66-933.............................8-22
64-989...............................7-4 66-232A ..........................8-13 66-546.............................8-14 66-747.............................8-16 66-936.............................8-22
64-994...............................7-5 66-253...............................8-9 66-547.............................8-14 66-806.............................8-20 66-943.............................8-22
64-995...............................7-5 66-255...............................8-9 66-550.............................8-14 66-806A ..........................8-21 66-962.............................8-22
64-999...............................7-5 66-256...............................8-9 66-553.............................8-14 66-807.............................8-20
66-258...............................8-9 66-561.............................8-15 66-808.............................8-20
66-259...............................8-9 66-563.............................8-15 66-808A ..........................8-21
67-063 —67-983
66-102 —66-962 66-261...............................8-9 66-564.............................8-15 66-809.............................8-20 67-063...............................9-4

Pr oduct Number Index

66-102...............................8-8 66-261A ..........................8-12 66-567.............................8-15 66-810.............................8-20 67-065...............................9-4
66-102A ..........................8-13 66-262...............................8-9 66-570.............................8-15 66-810A ..........................8-21 67-067...............................9-4
66-103...............................8-8 66-265...............................8-9 66-580.............................8-23 66-811.............................8-20 67-069...............................9-4
66-103A ..........................8-13 66-267...............................8-9 66-598.............................8-23 66-811A ..........................8-21 67-071...............................9-4
66-105...............................8-8 66-268...............................8-9 66-601.............................8-23 66-812.............................8-20 67-101...............................9-3
66-106...............................8-8 66-270...............................8-9 66-603.............................8-23 66-812A ..........................8-21 67-103...............................9-3
66-108...............................8-8 66-271...............................8-9 66-604...............................8-4 66-814.............................8-20 67-109...............................9-3
66-109...............................8-8 66-304.............................8-11 66-605.............................8-23 66-814A ..........................8-21 67-113...............................9-3
66-150.............................8-10 66-305.............................8-11 66-606...............................8-3 66-816.............................8-20 67-123...............................9-3
66-150A ..........................8-13 66-306.............................8-11 66-607.............................8-23 66-816A ..........................8-21 67-155...............................9-3
66-152...............................8-9 66-321.............................8-11 66-608...............................8-4 66-818.............................8-20 67-159...............................9-3
66-153...............................8-9 66-323.............................8-11 66-609.............................8-23 66-820.............................8-20 67-161...............................9-3
66-153A ..........................8-12 66-324.............................8-11 66-610...............................8-3 66-829.............................8-20 67-163...............................9-3
66-155...............................8-9 66-326.............................8-11 66-611...............................8-2 66-831.............................8-20 67-173...............................9-4
66-156...............................8-9 66-327.............................8-11 66-612...............................8-6 66-831A ..........................8-21 67-175...............................9-4
66-156A ..........................8-12 66-329.............................8-11 66-613.............................8-23 66-832.............................8-20 67-183...............................9-4
66-158...............................8-9 66-330.............................8-11 66-614...............................8-6 66-833.............................8-20 67-184...............................9-3
66-161...............................8-9 66-332.............................8-11 66-615...............................8-6 66-833A ..........................8-21 67-195...............................9-4
66-161A ..........................8-12 66-400...............................8-7 66-618...............................8-4 66-834.............................8-20 67-197...............................9-4
66-164...............................8-9 66-402...............................8-7 66-619...............................8-5 66-834A ..........................8-21 67-240...............................9-5
66-202...............................8-8 66-404...............................8-7 66-620...............................8-2 66-835.............................8-20 67-241...............................9-5
66-203...............................8-8 66-440...............................8-7 66-620A ............................8-5 66-835A ..........................8-21 67-253...............................9-5
66-205...............................8-8 66-441...............................8-7 66-621...............................8-1 66-836.............................8-20 67-255...............................9-5
66-206...............................8-8 66-443...............................8-7 66-626...............................8-3 66-836A ..........................8-21 67-257...............................9-5
66-208...............................8-8 66-445...............................8-7 66-639...............................8-5 66-837.............................8-20 67-259...............................9-5
66-209...............................8-8 66-501.............................8-14 66-706.............................8-19 66-837A ..........................8-21 67-303...............................9-5
66-211...............................8-8 66-502.............................8-14 66-708.............................8-19 66-838.............................8-20 67-305...............................9-5
66-212...............................8-8 66-504.............................8-14 66-710.............................8-19 66-838A ..........................8-21 67-307...............................9-5
66-214...............................8-8 66-505.............................8-14 66-711.............................8-19 66-839.............................8-20 67-323...............................9-7
66-215...............................8-8 66-507.............................8-14 66-712.............................8-19 66-840.............................8-20 67-331...............................9-6
66-217...............................8-8 66-509.............................8-14 66-714.............................8-19 66-843.............................8-17 67-357...............................9-6

F-16
 F
Product Number Index
67-367...............................9-6 67-927.............................9-12 68-097.............................9-17 69-146...........................10-16 69-485...........................10-18
67-369...............................9-6 67-929.............................9-12 68-163.............................9-18 69-148...........................10-16 69-490...........................10-17
67-370...............................9-7 67-935.............................9-12 68-171.............................9-18 69-149...........................10-16 69-501...........................10-16
67-401...............................9-6 67-965.............................9-12 68-175.............................9-18 69-151...........................10-16 69-503...........................10-16
67-404...............................9-8 67-971.............................9-12 68-177.............................9-19 69-152...........................10-16 69-505...........................10-16
67-405...............................9-8 67-973.............................9-12 68-178.............................9-18 69-153...........................10-16 69-507...........................10-16
67-407...............................9-8 67-977.............................9-12 68-179.............................9-19 69-155...........................10-16 69-513...........................10-17
67-410...............................9-8 67-983.............................9-12 68-191.............................9-18 69-156...........................10-16 69-515...........................10-17
67-436...............................9-8 68-199.............................9-18 69-158...........................10-16 69-517...........................10-17
67-441...............................9-7 68-241.............................9-19 69-159...........................10-16 69-530...........................10-14
67-457...............................9-8
68-001 —68-540 68-251.............................9-19 69-161...........................10-16 69-531...........................10-14
67-460...............................9-8 68-001.............................9-14 68-253.............................9-19 69-162...........................10-16 69-532...........................10-14
67-503...............................9-7 68-002.............................9-14 68-255.............................9-19 69-163...........................10-16 69-533...........................10-14
67-535...............................9-4 68-003.............................9-14 68-261.............................9-19 69-165...........................10-16 69-534...........................10-14
67-555...............................9-9 68-004.............................9-14 68-263.............................9-19 69-166...........................10-16 69-540...........................10-14
67-565...............................9-9 68-005.............................9-14 68-271.............................9-19 69-168...........................10-16 69-541...........................10-14
Pr oduct Number Index

67-657...............................9-2 68-006.............................9-14 68-273.............................9-19 69-169...........................10-16 69-542...........................10-14

67-659...............................9-2 68-007.............................9-14 68-275.............................9-19 69-171...........................10-16 69-543...........................10-14
67-661...............................9-2 68-008.............................9-14 68-278.............................9-19 69-172...........................10-16 69-547...........................10-14
67-667...............................9-2 68-009.............................9-14 68-310.............................12-6 69-173...........................10-16 69-550...........................10-15
67-669...............................9-2 68-010.............................9-14 68-312.............................12-6 69-175...........................10-16 69-551...........................10-15
67-671...............................9-2 68-011.............................9-14 68-433.............................12-1 69-176...........................10-16 69-552...........................10-15
67-687...............................9-2 68-012.............................9-14 68-445.............................12-1 69-178...........................10-16 69-554...........................10-15
67-699...............................9-2 68-015.............................9-13 68-516...........................10-14 69-179...........................10-16 69-605...........................10-17
67-717...............................9-1 68-016.............................9-13 68-524...........................10-14 69-181...........................10-16 69-621...........................10-17
67-777...............................9-1 68-045.............................9-15 68-532...........................10-14 69-182...........................10-16 69-623...........................10-17
67-779...............................9-1 68-046.............................9-15 68-540...........................10-14 69-183...........................10-16 69-625...........................10-17
67-781...............................9-1 68-047.............................9-15 69-185...........................10-16 69-643...........................10-18
67-783...............................9-1 68-048.............................9-15 69-186...........................10-16 69-645...........................10-18
67-785...............................9-1 68-049.............................9-15 69-001 —69-990 69-188...........................10-16 69-647...........................10-18
67-789...............................9-1 68-050.............................9-15 69-001...........................10-15 69-189...........................10-16 69-649...........................10-18
67-791...............................9-1 68-056.............................9-14 69-003...........................10-15 69-308...........................10-18 69-651...........................10-18
67-830...............................9-1 68-065.............................9-15 69-009...........................10-15 69-350...........................10-18 69-653...........................10-18
67-831...............................9-1 68-067.............................9-15 69-011...........................10-15 69-404...........................10-13 69-655...........................10-18
67-850...............................9-9 68-069.............................9-16 69-013...........................10-15 69-406...........................10-13 69-990...........................10-13
67-852...............................9-9 68-070.............................9-16 69-017...........................10-15 69-408...........................10-13
67-889.............................9-10 68-071.............................9-16 69-019...........................10-15 69-410...........................10-13
67-891.............................9-10 68-074.............................9-16 69-025...........................10-15 69-412...........................10-13
70-000 —70-976
67-895.............................9-10 68-075.............................9-16 69-027...........................10-15 69-440...........................10-13 70-000.............................10-6
67-901.............................9-10 68-076.............................9-16 69-031...........................10-15 69-442...........................10-13 70-041.............................10-8
67-905.............................9-11 68-079.............................9-16 69-033...........................10-15 69-444...........................10-13 70-042.............................10-8
67-908.............................9-11 68-080.............................9-17 69-065...........................10-15 69-446...........................10-13 70-043.............................10-8
67-910.............................9-11 68-082.............................9-17 69-069...........................10-15 69-448...........................10-13 70-044.............................10-8
67-911.............................9-11 68-083.............................9-17 69-141...........................10-16 69-450...........................10-13 70-045.............................10-8
67-912.............................9-11 68-090.............................9-17 69-142...........................10-16 69-452...........................10-13 70-046.............................12-6
67-917.............................9-12 68-092.............................9-17 69-143...........................10-16 69-454...........................10-13 70-047.............................10-8
67-923.............................9-12 68-095.............................9-17 69-145...........................10-16 69-480...........................10-18 70-049.............................10-8

F-17
 F
Pr oduct Number Index
70-101.............................10-9 70-264.............................10-9 70-447.............................10-7 70-865.............................12-6 72-424.............................13-5
70-103.............................10-9 70-266.............................10-9 70-449.............................10-7 70-920.............................12-2 72-425.............................13-5
70-105.............................10-9 70-268.............................10-9 70-451.............................10-7 70-921.............................12-2 72-426.............................13-5
70-107.............................10-9 70-270.............................10-9 70-453.............................10-7 70-923.............................12-2 72-427.............................13-5
70-109.............................10-9 70-272.............................10-9 70-481.............................10-7 70-925.............................12-2 72-428.............................13-5
70-110.............................10-8 70-274.............................10-9 70-501...........................10-12 70-927.............................12-2 72-432.............................13-4
70-112.............................10-8 70-276.............................10-9 70-503...........................10-12 70-929.............................12-2 72-433.............................13-5
70-114.............................10-8 70-280.............................10-9 70-505...........................10-12 70-933.............................12-2 72-434.............................13-5
70-116.............................10-8 70-291...........................10-10 70-507...........................10-12 70-935.............................12-2 72-435.............................13-5
70-118.............................10-8 70-292...........................10-11 70-509...........................10-12 70-943.............................12-2 72-436.............................13-5
70-120.............................10-8 70-293...........................10-10 70-511...........................10-12 70-950.............................12-3 72-437.............................13-5
70-122.............................10-8 70-294...........................10-10 70-515...........................10-12 70-952.............................12-3 72-441.............................13-7
70-124.............................10-8 70-295.............................10-8 70-517...........................10-12 70-954.............................12-3 72-442.............................13-3
70-126.............................10-8 70-296.............................10-8 70-519...........................10-12 70-956.............................12-3 72-451.............................13-8
70-128.............................10-8 70-297...........................10-11 70-521...........................10-12 70-958.............................12-3 72-452.............................13-8
70-129.............................10-9 70-301.............................10-6 70-531...........................10-12 70-960.............................12-3 72-453.............................13-8

Pr oduct Number Index

70-131.............................10-9 70-303.............................10-6 70-533...........................10-12 70-962.............................12-3 72-454.............................13-8
70-133.............................10-9 70-305.............................10-6 70-535...........................10-12 70-964.............................12-3 72-455.............................13-8
70-153...........................10-10 70-307.............................10-6 70-537...........................10-12 70-966.............................12-3 72-456.............................13-8
70-155...........................10-10 70-309.............................10-6 70-539...........................10-12 70-970.............................12-3 72-457.............................13-7
70-157...........................10-10 70-311.............................10-6 70-545...........................10-10 70-976.............................12-6 72-458.............................13-3
70-159...........................10-10 70-313.............................10-6 70-546.............................10-8 72-460.............................13-7
70-161...........................10-10 70-315.............................10-6 70-550.............................10-4 72-461.............................13-6
70-163...........................10-10 70-317.............................10-6 70-552.............................10-4
71-390 —71-930 72-462.............................13-6
70-165...........................10-10 70-319.............................10-6 70-553.............................10-4 71-390.............................13-1 72-463.............................13-6
70-167...........................10-10 70-325.............................10-6 70-554.............................10-5 71-401.............................13-4 72-471.............................13-6
70-187...........................10-10 70-329.............................10-6 70-556.............................10-5 71-403.............................13-4 72-472.............................13-6
70-189...........................10-10 70-331.............................10-6 70-557.............................10-5 71-405.............................13-4 72-473.............................13-6
70-191...........................10-10 70-333.............................10-6 70-559.............................10-5 71-431.............................13-4 72-474.............................13-6
70-193...........................10-10 70-335.............................10-6 70-560.............................10-3 71-435.............................13-4 72-475.............................13-6
70-195...........................10-10 70-337.............................10-6 70-562.............................10-3 71-437.............................13-4 72-476.............................13-6
70-197...........................10-10 70-347.............................10-6 70-563.............................10-3 71-921.............................13-9 72-477.............................13-6
70-199...........................10-10 70-353.............................10-6 70-564.............................10-3 71-922.............................13-9 72-478.............................13-7
70-201...........................10-10 70-357.............................10-6 70-565.............................10-2 71-923.............................13-9 72-479.............................13-7
70-221...........................10-10 70-361.............................10-6 70-567.............................10-2 71-924.............................13-9 72-480.............................13-7
70-231...........................10-11 70-367.............................10-6 70-568.............................10-2 71-925.............................13-9 72-485.............................13-8
70-233...........................10-11 70-369.............................10-6 70-578...........................10-12 71-926.............................13-9 72-486.............................13-8
70-235...........................10-11 70-391.............................10-7 70-579...........................10-12 71-927.............................13-9 72-487.............................13-8
70-237...........................10-11 70-393.............................10-7 70-790.............................12-4 71-928.............................13-9 72-488.............................13-8
70-239...........................10-11 70-395.............................10-7 70-801.............................12-4 71-929.............................13-9 72-490.............................13-8
70-241...........................10-11 70-397.............................10-7 70-803.............................12-4 71-930.............................13-9 72-491.............................13-8
70-251...........................10-11 70-399.............................10-7 70-807.............................12-4 72-492.............................13-9
70-253...........................10-11 70-419.............................10-7 70-811.............................12-4 72-494.............................13-9
72-421 —72-506
70-255...........................10-11 70-421.............................10-7 70-815.............................12-5 72-495.............................13-2
72-421.............................13-9
70-257...........................10-11 70-423.............................10-7 70-817.............................12-5 72-496.............................13-3
72-422.............................13-4
70-260.............................10-9 70-425.............................10-7 70-819.............................12-5 72-497.............................13-2
72-423.............................13-5
70-262.............................10-9 70-427.............................10-7 70-827.............................12-5 72-498.............................13-1

F-18
 F
Product Number Index
72-499.............................13-1 78-410.............................11-3 79-611.............................14-1 79-865.............................14-2
72-500.............................13-9
78-000 —78-642 78-411.............................11-3 79-627.............................14-1 79-867.............................14-2
72-501.............................13-9 78-000.............................11-1 78-412.............................11-3 79-631.............................14-1
72-504.............................13-9 78-010.............................11-1 78-413.............................11-3 79-635.............................14-1
72-505.............................13-9 78-015.............................11-1 78-431.............................11-3 79-639.............................14-1
81-110 —81-112
72-506.............................13-9 78-020.............................11-1 78-432.............................11-3 79-641.............................14-1 81-110...........................10-18
78-021.............................11-1 78-433.............................11-3 79-643.............................14-1 81-111...........................10-18
78-030.............................11-1 78-434.............................11-3 79-645.............................14-1 81-112...........................10-18
73-006 —73-310 78-031.............................11-1 78-436.............................11-3 79-647.............................14-1
73-006.............................6-84 78-040.............................11-1 78-438.............................11-3 79-649.............................14-1
73-008.............................6-84 78-041.............................11-1 78-440.............................11-3 79-651.............................14-1
86-001 —86-685
73-010.............................6-84 78-050.............................11-1 78-441.............................11-3 79-653.............................14-1 86-001.............................14-3
73-012.............................6-84 78-051.............................11-1 78-442.............................11-3 79-655.............................14-1 86-003.............................14-3
73-014.............................6-84 78-060.............................11-1 78-443.............................11-3 79-659.............................14-1 86-005.............................14-3
73-018.............................6-84 78-061.............................11-1 78-601.............................11-4 79-679.............................14-1 86-007.............................14-3
73-024.............................6-84 78-080.............................11-1 78-602.............................11-4 79-683.............................14-1 86-011.............................14-3
73-036.............................6-84 78-081.............................11-1 78-603.............................11-4 79-685.............................14-1 86-013.............................14-3
Pr oduct Number Index

73-048.............................6-84 78-090.............................11-1 78-604.............................11-4 79-687.............................14-1 86-041.............................14-3

73-205.............................6-85 78-091.............................11-1 78-606.............................11-4 79-689.............................14-1 86-043.............................14-3
73-207.............................6-85 78-092.............................11-1 78-608.............................11-4 79-691.............................14-1 86-045.............................14-3
73-209.............................6-85 78-093.............................11-1 78-610.............................11-4 79-693.............................14-1 86-047.............................14-3
73-211.............................6-85 78-102.............................11-2 78-612.............................11-4 79-695.............................14-1 86-051.............................14-3
73-229.............................6-85 78-103.............................11-2 78-631.............................11-4 79-697.............................14-1 86-053.............................14-3
73-231.............................6-85 78-104.............................11-2 78-632.............................11-4 79-699.............................14-1 86-055.............................14-3
73-233.............................6-85 78-106.............................11-2 78-633.............................11-4 79-703.............................14-1 86-257.............................14-3
73-235.............................6-85 78-107.............................11-2 78-634.............................11-4 79-727.............................14-1 86-259.............................14-3
73-237.............................6-85 78-108.............................11-2 78-636.............................11-4 79-729.............................14-1 86-261.............................14-3
73-295.............................6-85 78-109.............................11-2 78-638.............................11-4 79-731.............................14-1 86-263.............................14-3
73-299.............................6-85 78-110.............................11-2 78-640.............................11-4 79-735.............................14-1 86-265.............................14-3
73-305.............................6-84 78-111.............................11-2 78-642.............................11-4 79-739.............................14-1 86-291.............................14-4
73-310.............................6-84 78-112.............................11-2 79-743.............................14-1 86-293.............................14-4
78-113.............................11-2 79-757.............................14-1 86-295.............................14-4
78-115.............................11-2 79-493 —79-867 79-759.............................14-1 86-297.............................14-4
74-010 —74-558 78-116.............................11-2 79-493.............................14-2 79-761.............................14-1 86-299.............................14-4
74-010.............................6-84 78-118.............................11-2 79-495.............................14-2 79-763.............................14-1 86-391.............................14-4
74-014.............................6-84 78-119.............................11-2 79-496.............................14-2 79-765.............................14-1 86-393.............................14-4
74-018.............................6-84 78-303.............................11-2 79-551.............................14-1 79-767.............................14-1 86-395.............................14-4
74-024.............................6-84 78-304.............................11-2 79-555.............................14-1 79-771.............................14-1 86-397.............................14-4
74-036.............................6-84 78-306.............................11-2 79-559.............................14-1 79-825.............................14-2 86-399.............................14-4
74-048.............................6-84 78-308.............................11-2 79-561.............................14-1 79-827.............................14-2 86-401.............................14-4
74-551.............................12-7 78-333.............................11-2 79-565.............................14-1 79-829.............................14-2 86-421.............................14-4
74-552.............................12-7 78-334.............................11-2 79-569.............................14-1 79-831.............................14-2 86-423.............................14-4
74-553.............................12-8 78-336.............................11-2 79-587.............................14-1 79-841.............................14-2 86-425.............................14-4
74-554.............................12-8 78-338.............................11-2 79-591.............................14-1 79-843.............................14-2 86-427.............................14-4
74-555.............................12-8 78-401.............................11-3 79-595.............................14-1 79-845.............................14-2 86-471.............................14-4
74-556.............................12-9 78-402.............................11-3 79-599.............................14-1 79-847.............................14-2 86-473.............................14-4
74-557.............................12-9 78-403.............................11-3 79-601.............................14-1 79-849.............................14-2 86-475.............................14-4
74-558.............................12-9 78-404.............................11-3 79-603.............................14-1 79-859.............................14-2 86-477.............................14-4
78-406.............................11-3 79-605.............................14-1 79-861.............................14-2 86-479.............................14-4
78-408.............................11-3 79-607.............................14-1 79-863.............................14-2 86-531.............................14-5

F-19
 F
Pr oduct Number Index
86-533.............................14-5 87-425.............................14-9 89-011.............................11-5 94-178...............................4-4 94-506...............................4-4
86-537.............................14-5 87-441...........................14-10 89-012.............................11-5 94-180...............................4-4 94-507...............................4-4
86-539.............................14-5 87-442...........................14-10 89-014.............................11-5 94-182.............................4-16 94-508...............................4-4
86-541.............................14-6 87-443...........................14-10 89-015.............................11-5 94-184.............................4-16 94-509...............................4-4
86-543.............................14-6 87-444...........................14-10 89-016.............................11-5 94-186.............................4-16 94-510...............................4-4
86-545.............................14-6 87-461...........................14-10 89-021.............................11-5 94-188.............................4-16 94-518.............................5-24
86-547.............................14-7 87-462...........................14-10 89-022.............................11-5 94-190.............................4-30 94-519.............................5-24
86-549.............................14-7 87-463...........................14-10 89-023.............................11-5 94-213.............................4-30 94-521.............................5-24
86-551.............................14-7 87-464...........................14-10 89-024.............................11-5 94-214.............................4-30 94-523.............................5-24
86-559.............................14-5 87-465...........................14-10 89-025.............................11-5 94-215.............................4-30 94-525.............................5-24
86-561.............................14-5 87-491...........................14-10 89-026.............................11-5 94-216.............................4-30 94-543...............................4-3
86-563.............................14-5 87-492...........................14-10 89-027.............................11-5 94-217.............................4-30 94-544...............................4-3
86-565.............................14-5 87-493...........................14-10 89-028.............................11-5 94-218.............................4-30 94-545...............................4-3
86-567.............................14-6 87-521...........................14-10 89-029.............................11-5 94-219.............................4-30 94-546...............................4-3
86-569.............................14-6 87-522...........................14-10 89-030.............................11-5 94-221.............................4-30 94-547...............................4-3
86-571.............................14-6 87-523...........................14-10 89-031.............................11-5 94-253.............................4-30 94-548...............................4-3
86-573.............................14-7 87-551...........................14-11 89-032.............................11-5 94-254.............................4-30 94-549...............................4-3

Pr oduct Number Index

86-575.............................14-7 87-552...........................14-11 89-034.............................11-5 94-255.............................4-30 94-603...............................4-6
86-577.............................14-7 87-553...........................14-11 89-035.............................11-5 94-257.............................4-30 94-604...............................4-6
86-583.............................14-5 87-601.............................14-9 89-036.............................11-5 94-258.............................4-30 94-605...............................4-6
86-585.............................14-5 87-602.............................14-9 94-259.............................4-30 94-607...............................4-6
86-587.............................14-5 87-603.............................14-9 94-305.............................4-20 94-619.............................5-26
86-589.............................14-5 87-605.............................14-9 94-101 —94-762 94-307.............................4-20 94-622.............................5-26
86-591.............................14-6 87-621.............................14-9 94-101...............................4-4 94-309.............................4-20 94-624.............................5-26
86-593.............................14-6 87-622.............................14-9 94-102...............................4-4 94-311.............................4-20 94-625.............................5-26
86-595.............................14-6 87-623.............................14-9 94-103.............................4-16 94-312.............................4-20 94-626.............................5-26
86-597.............................14-7 87-624.............................14-9 94-105.............................4-16 94-313.............................4-20 94-711.............................4-34
86-599.............................14-7 87-625.............................14-9 94-108.............................4-15 94-314.............................4-20 94-713.............................4-34
86-601.............................14-7 87-721...........................14-11 94-109.............................4-15 94-315.............................4-20 94-715.............................4-34
86-605.............................14-8 87-722...........................14-11 94-110.............................4-15 94-347.............................4-20 94-717.............................4-34
86-607.............................14-8 87-723...........................14-11 94-111.............................4-15 94-349.............................4-20 94-719.............................4-34
86-608.............................14-8 87-724...........................14-11 94-112.............................4-15 94-351.............................4-20 94-722.............................4-34
86-651.............................14-8 87-725...........................14-11 94-113.............................4-15 94-352.............................4-20 94-724.............................4-34
86-653.............................14-8 87-727...........................14-11 94-114.............................4-15 94-353.............................4-20 94-751.............................4-34
86-655.............................14-8 87-751...........................14-11 94-115.............................4-15 94-354.............................4-20 94-753.............................4-34
86-659.............................14-8 87-752...........................14-11 94-121...............................4-5 94-355.............................4-20 94-755.............................4-34
86-681.............................14-8 87-753...........................14-11 94-122...............................4-5 94-361...............................4-4 94-757.............................4-34
86-683.............................14-8 87-755...........................14-11 94-125...............................4-5 94-362...............................4-4 94-759.............................4-34
86-685.............................14-8 94-128.............................4-16 94-363...............................4-4 94-762.............................4-34
94-148.............................4-15 94-364...............................4-4
89-001 —89-036 94-150.............................4-15 94-370...............................4-3
87-401 —87-755 89-001.............................11-5 94-151.............................4-15 94-371...............................4-3 POL104 - POL116
87-401.............................14-9 89-002.............................11-5 94-152.............................4-15 94-372...............................4-3 POL104 ...........................13-6
87-402.............................14-9 89-003.............................11-5 94-153.............................4-15 94-373...............................4-3 POL106 ...........................13-6
87-403.............................14-9 89-004.............................11-5 94-154.............................4-15 94-374...............................4-3 POL108 ...........................13-6
87-404.............................14-9 89-005.............................11-5 94-155.............................4-15 94-389...............................4-6 POL110 ...........................13-6
87-405.............................14-9 89-006.............................11-5 94-168...............................4-4 94-391...............................4-6 POL113 ...........................13-6
87-421.............................14-9 89-007.............................11-5 94-170...............................4-4 94-393...............................4-6 POL116 ...........................13-6
87-422.............................14-9 89-008.............................11-5 94-172...............................4-4 94-503...............................4-4
87-423.............................14-9 89-009.............................11-5 94-174...............................4-4 94-504...............................4-4
87-424.............................14-9 89-010.............................11-5 94-176...............................4-4 94-505...............................4-4

F-20
 F
Product Number Index

NOTES:
Pr oduct Number Index

F-21
 F
Pr oduct Number Index

NOTES:

Pr oduct Number Index

F-22
 F
Product Number Index

NOTES:
Pr oduct Number Index

F-23
ABT Inside cover_2010 3/7/10 10:34 PM Page 1

HANDS-ON-SAFETY TOOL KIT

ARMSTRONG TOOLS WARRANTY PRODUCT SPECIFICATIONS

If any Armstrong Hand Tool (except Torque Products) ever fails to give complete satisfaction, Armstrong products are designed to meet or exceed the appropriate standards set forth by the ANSI (American National Standards
return it to your Armstrong Distributor, and it will be repaired or replaced free of charge. Institute) and adopted by the ASME (American Society of Mechanical Engineers) committee governing the accepted standards for
the hand tool industry in order to ensure quality, consistency, and safety of the products produced by manufacturers. We have also
Armstrong Torque Products are warranted to (1) be free of defects in material and indicated where certain product also conforms to US Government and/or Aviation standards. These standards include but are not
workmanship, and (2) meet out of the box calibration accuracy standards as stated in the limited to the following:
product literature. Accuracy standards for calibration are warranted for 90 days from date of
purchase. Products for which Warranty Repair is requested should be returned, at Buyer's ASME / ANSI B18.15-1985 ASME / ANSI B107.17M-1997
cost, for evaluation to: ASME / ANSI B107.1-2002 ASME / ANSI B107.18M-2003
ASME / ANSI B107.2-2002 ASME / ANSI B107.19-2004
Electronic Torque Wrenches: All other Torque Products: ASME / ANSI B107.4 – 2005 ASME / ANSI B107.20-2004
DTG Torque Repair Angle Repair & Calibration Service, Inc. ASME / ANSI B107.5M-2002 ASME / ANSI B107.21-2005
3000 West Kingsley Road 175 Angle Drive ASME / ANSI B107.8-2003 ASME / ANSI B107.23-2004
Garland, TX 75041 Beckley, West Virginia 25801 ASME / ANSI B107.10-2005 ASME / ANSI B107.28-2005
(304) 253-5729 ASME / ANSI B107.11-2002 ASME / ANSI B107.29 – 2005
ASME / ANSI B107.12-2004 ASME / ANSI B107.33M-2002
Armstrong Torque Products are precision instruments that contain moving parts. These ASME / ANSI B107.13-2003 ASME / ANSI B107.100-2002
components are subject to normal wear through use and replacement thereof is the ASME / ANSI B107.14 – 2004 ASME / ANSI B107.400-2008
responsibility of Buyer. Torque Products should be routinely checked for calibration at an ASME / ANSI B107.16M-1998 ASME / ANSI B107.410-2008
Authorized Repair Center using Armstrong repair parts. ASME / ANSI B107.600-2008

This Warranty shall not apply to Products which have been misused, abused, damaged by SAE AS954E – Wrenches, Hand 12 Point High Strength, Thin Wall
accident or otherwise, repaired by anyone other than an Authorized Repair Center or
modified by anyone other than Danaher Tool Group and is in lieu of all other warranties, Armstrong tools reserves the right to make changes in the design and/ or construction of our tools at any time without prior notice.
whether express, implied or statutory. We also reserve the right to discontinue the manufacture or offering for sale of any tools at any time at our discretion. At Armstrong Industrial Hand Tools, we understand
the importance of safety in the workplace. As part
THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A PARTICULAR PURPOSE Dimensions shown in this catalog and on Armstrongtools.com have been furnished solely as a convenience to our users and are not of our Safety Training Program, we offer a
ARE SPECIFICALLY EXCLUDED. Buyer's sole and exclusive remedy for breach of this Warranty intended to be exact product specifications for any individual article of production.
is, at the option of Danaher Tool Group, repair or replacement of the defective Product. IN
complete kit that includes tools for demonstration
NO EVENT WILL DANAHER TOOL GROUP BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONTACT INFORMATION and helpful tips on the proper identification,
CONSEQUENTIAL OR PUNITIVE DAMAGES ARISING FROM BREACH OF THIS WARRANTY, EVEN IF Armstrong Industrial Tools inspection, selection, usage, maintenance and
DANAHER TOOL GROUP HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 14600 York Rd. Suite A storage of your hand tools. The purpose of this
Sparks, MD 21152 Hands-on-Safety Tool Kit is to help toward
General Telephone: 800-688-8949
Fax Number: 800-234-0472
maximizing performance, minimize downtime and
www.armstrongtools.com most important avoiding injury.

KIT Number 98-751

ARMSTRONG TOOLS HISTORY
KIT ITEMS
The Armstrong Bros. Tool Co. was founded in 1890 by four brothers, the sons of to the ground. But the company salvaged and re-conditioned its inventory,
a Scottish immigrant blacksmith. In the beginning, the company manufactured rebuilt the plant, doubled the floor space, and continued to grow. In 1905, Armstrong® Tools
and distributed bicycle parts, together with tools and equipment people used to needing still more space, the brothers purchased property, and built a 100,000
manufacture and repair bicycles. square foot, 3-story brick factory. At this point, the company was still involved • 4 Combination Wrenches (9/16”)
only in the manufacture of tool holders and related machine tool accessory • 3 Ratchets (3/8” Drive)
In 1895, as part of their manufacturing program, the brothers introduced lathe items. • 6 Laser-etched EYE-D Sockets
tool holders. By 1900 this product showed such promise that the company • 1 Impact Locking Extension
started devoting full time to manufacturing. So it was that the company's In 1909, Armstrong introduced a line of drop forged wrenches. From its modest
foundation was built upon the tool holder. These holders replaced the heavy, beginning selling bicycle parts, the company launched into a line expansion
Training Materials
individually forged cutting tools that until then were necessary for lathe work. that's continued to today, over 100 years later, with a product line which includes
With the Armstrong system, a forged permanent shank was used with various over 6,000 items of mechanic's tools, pipe and tubing tools, machine shop • Audio Visual Program • 89081-33
shapes of small, interchangeable cutting tools. As advertised, the Armstrong accessories, and cutting tools. Armstrong Tools has a long heritage of high quality • Safety Presentation • 89081-32
system did indeed save "all forging and 70% of grinding," and by the mid manufacturing, predominantly in the U.S.A. and we will continue that heritage. • Participant Quiz • 89081-06
1900's the use of forged cutting tools in machine shops was virtually unheard of, • Participant Certificate • 89081-07
replaced instead by the Armstrong System of Tool Holders. In December 1994, after 105 years of private ownership by the Armstrong • Hard Hat Stickers • 89081-05
family, the company was acquired by the Danaher Corporation. Danaher's family • Participant Sign-In Sheet • 89081-08
The company's first manufacturing facilities were located in a wooden structure of brands includes Matco Hand Tools, Armstrong Industrial Tools, GearWrench, • Safety Brochure • 89081-30
built across the back of two of the brothers' adjoining yards on Edgewood Ave in Allen Industrial Tools and Hex Keys, K-D Automotive Specialty Tools, Jacobs • Safety CD • 89081-31
Chicago, Illinois. At the same time, they also maintained a store in downtown Chucks, Jobox, Delta among others.
Chicago. In 1900, the brothers decided to devote full time to manufacturing and For more information or to find your
moved operations to a new plant. On April Fools' Day in 1902, that plant burned local distributor, call 800.688.8949.
ABT Catalog cover_FA 3/16/10 9:23 PM Page 1

Danaher Tool Group

14600 York Road, Suite A
Sparks, MD 21152

Phone 800-688-8949
Fax 800-234-0472
Website: www.armstrongtools.com

Form No. 89081-69

Printed in U.S.A. 3/10
$5.00

Copyright © 2010 Danaher Corporation

All rights reserved.

DISTRIBUTED BY

Form No. 89081-69