Scribd
Upload
60 views1 page

Terluran GP-35 TDS

Terluran GP-35 is a high flow grade of ABS designed for injection molding, offering good impact and heat deflection resistance. The document includes detailed rheological, physical, mechanical, impact, thermal, and electrical properties of the material, along with ISO test methods and property values. It also contains a disclaimer regarding the accuracy of the information and liability for its use.

Uploaded by

bing.quek
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
60 views1 page

Terluran GP-35 TDS

Terluran GP-35 is a high flow grade of ABS designed for injection molding, offering good impact and heat deflection resistance. The document includes detailed rheological, physical, mechanical, impact, thermal, and electrical properties of the material, along with ISO test methods and property values. It also contains a disclaimer regarding the accuracy of the information and liability for its use.

Uploaded by

bing.quek
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Product Information

Nov 2010
Terluran® GP-35
Styrolution

Email PDF Datasheet | Print/Save Version

Product Description
Terluran GP-35 is a very high flow grade of ABS for injection molding with good resistance to impact and heat deflection.

RHEOLOGICAL ISO Test Method Property Value


Melt Volume Rate (220 °C/10 Kg), cc/10min. 1133 34
PHYSICAL ISO Test Method Property Value
Density, g/cm³ 1183 1.04
MECHANICAL ISO Test Method Property Value
Tensile Modulus, MPa 527
23°C 2,300
Tensile stress at yield, MPa 527
-40°C 63
23°C 44
80°C 19
Tensile strain at yield, % 527
23°C 2.4
Nominal strain at break, % 527
23°C 12
Flexural Strength, MPa 178
23°C 65
IMPACT ISO Test Method Property Value
Izod Impact, kJ/m² 180
23°C 22
Charpy Notched, kJ/m² 179
23°C 19
-30°C 7
Charpy Unnotched, kJ/m² 179
23°C 125
-30°C 90
THERMAL ISO Test Method Property Value
HDT A (1.8 MPa), ° C 75 94
HDT B (0.45 MPa), ° C 75 99
Coef. of Linear Thermal Expansion, Parallel, mm/mm °C 0.95 X10-4
Vicat Softening Temperature VST/B/50 °C 306 95
ELECTRICAL ISO Test Method Property Value
Volume Resistivity IEC 60093 >1E13
Electric Strength, Short Time, 1.5 mm IEC 60243-1 38

Note
Although all statements and information in this publication are believed to be accurate and reliable, they are presented gratis and for guidance
only, and risks and liability for results obtained by use of the products or application of the suggestions described are assumed by the user. NO
WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, DATA OR INFORMATION SET FORTH. Statements
or suggestions concerning possible use of the products are made without representation or warranty that any such use is free of patent
infringement and are not recommendations to infringe any patent. The user should not assume that toxicity data and safety measures are
indicated or that other measures may not be required.

Styrolution USA LLC General Information: 800-922-0380


100 Campus Drive E-mail: Styrenics_customer_service@basf.com
Florham Park, NJ 07932 Web address: http://www.styrolution.us.com

You might also like