Leading Manufacturer And Supplier of Waterpollution

control equipments

C&S WATER AND WASTE WATER SOLUTIONS

“Enhancing the quality of Water”

Contact Us:

Registered address:
Plot no 255 VIDHYA VIHAR
CHIPIYANA BUJURG GAUTAM
BUDDHA NAGAR (U.P.)
GSTIN: 09AARFC6921B1ZF
+91-8920801388, 9555212970
Website:- cnswwsolutions.com
Info@cnswwsolution.com
cnswwsolutions@gmail.com
 ABOUT US
ONE STOP SOLUTION COMPANY FOR INDUSTRIAL NEEDS

We are glad to introduce ourselves as a leading Engineering, Manufacturing, Servicing & Consultancy
Company in FRP industrial products and wastewater treatment Equipments.

We are pioneered in Manufacturing of ETP STP’s solutions technology, through the continuous development
and introduction of professionally and technology since inception of the company in 2020.

We provide our esteemed customers with excellent after sales support. Apart from our quality products
we believe in customer retention and take due initiatives in building a relationship for lifetime. Our R&D
and design team is constantly on task to find and incorporate better/additional design features to
enhance the Mean Time between Failures (MTBF) of Products leading to higher reliability.

We believe in going that extra mile to attain the ultimate parameter of customers delight. We ensure that
our esteemed customers get an excellent after sales support provided by our experienced and capable
support team is another distinctive feature of our company.

Our quality policy says, "We are committed to produce excellent quality products as per quality
standards
Sludge Dewatering Machine (Sludge Handling System)
Sludge Dewatering Machine reduces the sludge volume and mass by
removal of sludge water from interstices between sludge particles.
The sludge cake so produced, has moisture content of about 15-25%.
Main purpose of this machine is to minimize sludge handling and its
disposal.
It is the most cost effective and time saving method for sludge
handling. Sludge Dewatering is achieved by passing the polymer
enriched slurry into the dewatering chamber, wherein, the slurry get
compressed by a screw inside the compression cylinder. At the outlet
we get the cake which can be further reduced in volume with the
help of a dryer.

Features
• Suitable for sludge of 0.2%-10% solid consistency at Input and
achievable Outlet consistency of 15-25 Dry solids. Application
• Our machine can handle wide flow rate from 0.5 m3/ Hr up to
All Range of Effluent Treatment Plant Sludge
150 m 3/ Hr and sludge concentration from 0.2 to 10% and can
Municipal Sewage Sludge
easily handle oily/sticky sludge.
• Extremely low power consumption( 90-95% less than decanter Textile ETP Sludge
centrifuge) Tannery Sludge
• No need for regular operator Food processing industry Sludge
• Low footprint and noise free (less than 68dbA) Slaughter House Sludge
• Non-clogging operation Water Treatment Plant Sludge
 Flash Mixer, Agitator,
Flocculator
Flash mixing and flocculation are
essential in the treatm ent of
industrial and m unicipal
wastewater, which contains
colloidal-type suspension
materials, i.e. particles that are too
small or light to be able to settle
Drum Screen and be eliminated.
We design and manufacture
Drum Screen is designed for
agitator which match your exact
separation of screenings from
requirement and provide superior Centrifugal
industrial wastewater effluent, and mixing.
particularly for water containing Blower
viscose and fibrous elements. It is
completely made of Stainless steel Centrifugal blowers, or fans, are
which gives it a long service life. among the most efficient and
versatile pieces of air moving
Flow is delivered by pump or gravity equipment. The scroll housing
to the inlet section where turbulence in a centrifugal fan accelerates
is reduced in quiescent conditions in the air and changes the

the inlet tank. Flows enter the direction of the airflow twice, a

cylindrical drum (out to in) through a full 90 degree, before leaving

high quality wedge wire screen. the housing. Centrifugal
Screenings fall into a hopper, which blowers are quiet and reliable
can be fitted with a compacting and are made to operate in a
screw conveyor. variety of environments and
applications.
 Screw Screen
Multi Rake Bar Screen The screw screen provides
The waste water flows through bars screening of solids from raw
made of stainless steel, while sewage or from wastewater in
contaminants are held back. Solid industrial applications. The screw
matter is picked up directly at the screen is designed for installation
bottom of the channel without the in a concrete channel. As standard
need for a base step. The cleaning the system includes compaction of
elements are fixed between two screenings and washing in the
chains and are designed with teeth compaction zone.
for the best cleaning of the screen. The compactor, located at the end
The screenings can be discharged of the transport section of the
into containers, wash compactors, screw, carries out the compaction
screw conveyors, conveyor belts etc. and dewatering of screenings to
Sealing at the sides prevents solids reduce the weight and volume of
from circumventing the filter. captured screenings.
Step Screen
Step Screens are designed for removal
of fine and medium & solid waste from
effluent channels. They are installed in
wastewater treatment plants after
removal of large solid waste to protect
equipment from damage. The success
and broad acceptance of the STEP
SCREEN system is due to its function,
the easy-to-understand operation
method, the simple cleaning method
without any aids (self-cleaning effect
according to the counter current
principle), easy servicing, its ability to
handle very large screenings volumes
and its operating reliability.
 Conveyors(Belt/Screw)
Municipal Water and Waste Water Treatment plants need to use conveyance for solids, screenings, and grit.
Plants choose between belt conveyors and screw conveyors.

The choice between belt conveyors vs screw conveyors comes down to what materials you are conveying.
Because Municipal Water and Waste Water Treatment applications have several difficult to handle products, we
will cover each product separately as we assess the best conveying solutions.
Purpose of Conveyors in waste water treatment
Dewatered Sludge
Dried Biosolids
Raw Screenings
Compacted Screenings
Wet Grit
Dewatered Grit

Belt Conveyor Screw Conveyor

pros & cons pros & cons
Pros Pros
Use less power than screw
Completely enclosed (safety, odor
conveyors
control)
Does not change product as it
Less bearings than a belt conveyor
conveys
Can convey vertically
Best for long distances
Used in hopper live bottom
Best for high volumes
applications
Cons
Cons
Costly to enclose for odor
Stringy material may rag on shafts
Many roller bearings
or hanger bearings
Limitations on incline degrees
Shearing action may change sludge
 SBR DECANTER AND TECHNOLOGY
(sequencing batch reactor)
The decanter is a key piece of equipment within a sequencing batch reactor (SBR) system, removing
clarified effluent from the basin during the decant phase of the operational cycle.

SBR tank carries out the functions of equalization , aeration and sedimentation in a time sequence rather
than in the conventional space sequence of continuous-flow systems..In SBR,all related processes of
Aeration, Settling, Decanting are carried out in same reactor which reduces construction cost against
conventional system . The most important component of SBR process is decanting system.

Decanter is a key component of SBR process, it

withdraws the treated effluent without
disturbing the settled sludge layer. Our moving
arm swing SBR decanter comes with a scum
baffle driven by gear motor and actuator. We
have a wide range of SBR decanter
manufacturing capacity start from 0.5 mtr to 32
mtr weir length.

Features
Moving arm type SBR Decanter
Minimum Operating Cost
Easy to operate and maintain
Applicable for Batchwise and continues
operation
High & Stable performance
Wide range from 1M LD to 10 0 M LD
 Media Filters (ACF,PSF)
Filter are used in water treatment for
removal of suspended Solids from
water. In most cases it is the last stage
in the pretreatment of water for
removal of un-dissolved impurities
prior to treatment by Ion Exchange or
by Reverse Osmosis. Coagulation,
flocculation and clarification precede
filtration.

Media Filters used in water &

Wastewater treatment are either
pressure or gravity filters depending
upon the flow of water. Water is
pumped through a pressure filter while
water flows by gravity in a gravity filter
.They employ granular media like sand,
anthracite or activated carbon either
alone or in combination as the filter
media. Filters with special media are
also used to remove iron and or
manganese that may be present in
some bore well waters.
Esteemed Clients
 OUR PRODUCTS RANGE
 GATES (MANUAL ANDMOTORISED)
 SCREEN (COARSE ANDFINE)
 GRIT SEPARATOR
CLARIFLOCCULATOR (CLARIFIER ALL TYPE)
OIL SKIMMER (BELT AND API)
 SBR (FLOTING AND MOTORISED)
 PRESSURE FILTERS (ACF,PSF,MGF)
 SLUDGE DEWATERING MACHINE ( SCREW PRESS)
 SLUDGE DRYER(PADDLE DRYER)
 AGITATORS,FLASH MIXERS,FLOCULLATOR
 SOLID LIQUID SEPARATOR