Scribd
Upload
315 views1 page

Jib Crane Inspection Checklist-3

The document is a Jib Crane Inspection Checklist used by the HSE department for ensuring crane safety. It outlines various inspection items that must be checked, with specific conditions under which issues must be reported and the crane tagged out of service. The checklist includes aspects such as serviceability, SWL marking, structural integrity, and functionality of various components.

Uploaded by

Mahmoud Saied
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
315 views1 page

Jib Crane Inspection Checklist-3

The document is a Jib Crane Inspection Checklist used by the HSE department for ensuring crane safety. It outlines various inspection items that must be checked, with specific conditions under which issues must be reported and the crane tagged out of service. The checklist includes aspects such as serviceability, SWL marking, structural integrity, and functionality of various components.

Uploaded by

Mahmoud Saied
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Document Title Document Number Department Territory

Jib Crane Inspection Checklist CoE-HSE-CL-003 HSE Group - CoE


Author Name - Title Approver Name - Title Revision Date Rev No.
Page 1 of 1 Abdelrahman Waleed – Waleed ElGhamrawy –
May-2025 0
Group HSE Trainer Group HSE Manager

Jib Crane Inspection Checklist


CRANE I.D. S.W.L. (Marked)
CRANE S.N DATE INSPECTED
CRANE MODEL LOCATION
DEPARTMENT INSPECTED BY
NOTE:
For each item below, if the answer is " X ", the inspector must immediately report the issue to the supervisor.
The crane must be tagged out of service to prevent accidental use until it is inspected, repaired, and confirmed safe.

# Item Inspection Method ✓, X, N/A


1 Serviceability Crane is not tagged out of service and is approved for use.
Safe Working Load (SWL) is clearly marked and visible on both sides of the boom/jib, hoist,
2 SWL Marking
and hook. SWL exceeds the intended load.
Major Crane structure, boom/jib, mast, boom pivot, anchor bolts, and floor fixings are in good
3
Structure condition with no cracks, deformation, or physical damage.
Hook is free from damage, cracks, rust, or deformation. Safety latch is present and
4 Hook
functional.
Chain or Wire Chain or wire rope is free from kinks, broken links or wires, cracks, bends, gouges, excessive
5
Rope wear, or elongation beyond 10%.
Hoisting Trolley and hoisting mechanism are in good condition and operate smoothly without
6
Mechanism obstruction.
7 End Stoppers End stoppers are present and undamaged.
8 Limit Switches All applicable limit switches (hoist upper/lower, rotation) are functional.
9 Pendant Pendant and pendant cable are free from damage, wear, or exposed wiring.
10 Electrical Electrical ON/OFF isolation switch is present and functioning properly.
Emergency STOP button is red, functional, cuts power when pressed and requires manual
11 Emergency
reset.
All motion controls, brakes, and operating mechanisms function properly. No unusual noise,
12 Function Test
vibration, or jerky motion during operation.
13 Document Crane has a valid and current Third-Party Inspection (TPI) certificate.

You might also like