HD6200B/HD6600B
High Density Polyethylene
Special Characteristics : InnoPlus HD6200B and HD6600B are Resin
high density polyethylene blow
molding grade with optimum balance of processability, environmental stress cracking resistance (ESCR) and
impact strength. They are used for wide variety blow molding applications of small to medium size
container and multi use grade from high ESCR to normal ESCR.
Typical Applications : Personal care containers, Cosmetic containers, Detergent containers, Lubricant oil
containers
Typical Properties :
Properties HD6200B HD6600B Unit Test
Method
Physical Properties
Melt Flow Rate (190 oC, 2.16 kg) 0.45 0.40 g/10 min ASTM D1238
Density 0.962 0.957 g/cm3 ASTM D1505
Vicat Softening Point @ 10 N, 50 oC/hr 125 125 o C ASTM D1525
Melting Point 131 133 o C ASTM D3418
Mechanical Properties
(Based on compression
specimens)
Tensile Strength @ Yield 330 320 kg/cm2 ASTM D638
Tensile Strength @ Break 350 400 kg/cm2 ASTM D638
Elongation @ Break 1000 1000 % ASTM D638
Stiffness 10000 10000 kg/cm2 ASTM D747
Flexural Modulus 15000 14000 kg/cm2 ASTM D790
Notched Izod Impact Strength 12 (P)* 10 (P)* kg.cm/ ASTM D256
cm
Durometer Hardness 65 65 Shore D ASTM D2240
ESCR, F50 (Condition B, 25 % Igepal) 60 400 hrs ASTM D1693
* P = Partial Break
GC Marketing Solutions Company Limited
Energy Complex Building A, 9th Floor, 555/1 Vibhavadi Rangsit Road, Chatuchak, Bangkok 10900 Tel: 66 2140 Revised Date : Sep,
4488 Fax: 66 2140 4333 2019
HD6200B/HD6600B
High Density Polyethylene
Resin
Note : Properties reported here are typical values of the product, not to be considered as specifications.
PTT Global Chemical makes no representations as to the accuracy or completeness of the information contained herein.
GC Marketing Solutions Company Limited
Energy Complex Building A, 9th Floor, 555/1 Vibhavadi Rangsit Road, Chatuchak, Bangkok 10900 Tel: 66 2140 Revised Date : Sep,
4488 Fax: 66 2140 4333 2019
HD6200B/HD6600B
High Density Polyethylene
Resin
Processing Condition :
Extruder temperature : 165
- 190 oC Die temperature : 180
- 195 oC
FDA Statement :
HDPE under the brand InnoPlus complies with U.S. FDA 21 CFR 177.1520 regulation for polyethylene used
in articles that contact food except for articles used for packaging or holding food during cooking.
Disclaimer :
This Applications specified herein is for reference only and not suitable for using in the manufacturing of any products in medical and pharmaceutical sectors.
Determination of suitability of the product for the use and purpose shall be the customer’s responsibility. Customer is obligated to inspect and test the
product for such suitability. Customer is responsible for appropriate, safe, legal use processing and handling of the product.
To our best knowledge, information contained herein is true and accurate as of the date of its publication. However, we make no representations or warranties with
respect to accuracy,
reliability and completeness of the information contained herein for any purpose.
No warranties, express or implied, which extend beyond the description herein are given by us. Nothing herein shall constitute any implied warranty of
merchantability or fitness for a particular purpose.
We assume no liability for any use of the product in combination with other materials. The information contained herein entirely relates to the product when it is
not used in combination with any third party’s materials.
GC Marketing Solutions Company Limited
Energy Complex Building A, 9th Floor, 555/1 Vibhavadi Rangsit Road, Chatuchak, Bangkok 10900 Tel: 66 2140 Revised Date : Sep,
4488 Fax: 66 2140 4333 2019
HD6200B/HD6600B
High Density Polyethylene
Note : Properties reported here are typical values of the product, not to be considered as specifications.
Resin
PTT Global Chemical makes no representations as to the accuracy or completeness of the information contained herein.
GC Marketing Solutions Company Limited
Energy Complex Building A, 9th Floor, 555/1 Vibhavadi Rangsit Road, Chatuchak, Bangkok 10900 Tel: 66 2140 Revised Date : Sep,
4488 Fax: 66 2140 4333 2019
