-1-
PRODUCT OVERVIEW
SPECIFICATION
PROGRAM 3 Separate Watering Programs Button
OK/ MANUAL Confirm and MANUAL Watering Button
- Decrease Button
+ Increase Button
SET Set your watering schedule
ZONE Select Zone 1 or Zone 2 to be programmed
-2-
SPECIFICATION
Min/Max Operating Pressure 0.5Bar ~8bar( 7.25psi~116psi)
Working Temperature
Power 4 x AA alkaline batteries
Waterproof IP55
Rain Delay Time 1day and up to 7days
Water Duration 0min~ 5H 59min
Water Frequency Every 1 to 7 days or any day from
Monday to Sunday
NOTE:
1. For outdoor use only
2. Clean the flter regularly and replace if it is worn, in order to extend the
working life of timer
keep away from freezing
4. Do not install the timer with tools. Hand tighten ONLY. Use of tools
may damage the timer
5. Do not subject the product to extreme force and shock
necessary.
is different
-3-
PRODUCT INSTALLATION
1. INSTALLINGS THE BATTERY
1) Remove the battery cover on back of the timer
2) Install 4 new AA (1.5V) alkaline batteries (not included)
NOTE:
1. Firmly restore the battery to ensure water resistance.
2. Removed old batteries at the end of the watering season
and disposed of them properly.
3. Replace batteries when the low battery indicator appears on
display.
4. Please do not insert rechargeable batteries to avoid low
voltage.
5.
reset once power off.
2. INSTALLING THE TIMER
1) Attach the timer to an outdoor hose faucet.
2) Please turn on the tap after programming the timer.
-4-
AUTOMATIC WATERING PROGRAM SETTING
1. Set Time
1. Press the " ", the " " points to .
2. Press the " " to set the current hour
and minute. Press " " to confirm.
3. Press the " " to set the current day of
the week. Press the" "to confirm
4. Press " " to save changes and moving to
next setting, .
-5-
2. Set START TIME
1. Press the " ", the " " points to .
2. Press the " " to set the current hour
and minute. Press " " to confirm.
3. Press the " " to switch plan between
P1, P2 and P3.
4. Press " " button to switch outlet between
ZONE 1 and ZONE 2 .
5. Press " " to save and moving next setting ,
HOW LONG
-6-
3. Set HOW LONG
1. Press the " ", the " " points to .
2. Press the " " to set the hour and minute.
Press " " to confirm.
3. Press the " " to switch plan between
P1, P2 and P3.
4. Press " " button to switch outlet between
ZONE 1 and ZONE 2 .
5. Press " " to save and moving next setting ,
HOW OFTEN
1. When the HOW LONG`= 0 minute, the
scheduled task will not be executed
2. The Watering duration from 0 minute
to 5 hours 59 minutes.
-7-
4. Set HOW OFTEN
There are 2 setting modes for watering frequency
A: Weekday Mode : Monday to Sunday
1. Press the " ", the " " points to .
2. Press the " " to select the day of the
week. Press " " to confirm.
3. " "means the Day has been selected.
Pressing " " again can cancel the selection.
5. Press " " to save and moving
NOTE:
If no Day is selected, the scheduled will not be
executed
-8-
B: Every 1/2/3/4/5/6 Days Mode
1. When"SA" is flashing, press" "button to enter
the setting of the day
2. Using the " " button to select the interval
watering days of 1/2/3/4/5/6/7 days
3. Press the " " button to save
-9-
5. AUTO
Press the " ", the " " points to and the
program will be running as you set before.
-10-
6. OFF
Press the " ", the " " points to and the
screen shows and the battery level.
All program are saved but the timer stop working.
-11-
ADDITIONAL FEATURES
MANUAL WATERING
Please make sure the timer is in Auto Run state.
1. Press the " " and press " " to select
watering duration from 0 min to 59 mins.
2. Press the to switch the zone1 and ZONE2
3. Press " " button it will start to watering
4. When you press the " " button again, the
manual watering task ends even if it is watering
and the timer will switch back to Auto mode.
ONLY watering ZONE1 : SET the ZONE 2 = 0
minute and ZONE1 watering time
ONLY watering ZONE2 : SET the ZONE 1 = 0
minute and ZONE2 watering time
-12-
RAIN DELAY
Please make sure the timer is in Auto Run state.
1. Hold and press " " button 5s until the" "
appears on the screen
2. Press " " button to set the duration of
the delay from 1 to 7 days.
3. Press " " button to save changes.
4. To cancel the Rain delay you can press" " 5s
again
-13-
CHILDREN LOCK
Please make sure the timer is in Auto Run state.
Hold and press " " button 5s until the " "
appears on the screen. If you want to cancel
the " ", press " " button 5s again
BATTERY STATUS
Battery status will be displayed as following:
FULL LOW BATTERY
Note: When the low battery indicator appears on
display, the valve will close automatically to avoid
leakage. Please replace the battery in time in case
of interrupting the normal operation.
-14-
TROUBLESHOOTING
1. No filter or not be placed 1. Add filter and make sure
horizontally it' s placed horizontally in
the inlet.
2. The faucet is not the
The water inlet leakage 2. Make sure the faucet is
standard 3/4"
a 3/4" faucet.
3. Strengthen it with raw
rubber wrap.
4. Use the tape
1. Valve blockage 1. Check the water pressure
2. The water pressure is low 2. Check the timer installation
The water won't stop/flow out 3. Wrong way of installation 3. Wash the rubber filter
1. Use brand new alkaline
batteries.
1. Mixed use of old and new
2. Rechargeable batteries
batteries
Short battery life and carbon batteries
2. Used the carbon batteries
have a short and unstable
or rechargeable batteries
battery life, please use the
alkaline batteries instead
of them.
-15-
