Scribd
Upload
6 views1 page

ACCC507

The ACCC®-Warsaw data sheet provides detailed mechanical and electrical specifications for the conductor, including dimensions, mass, tensile strength, and resistance values. It specifies a maximum operating temperature of 180°C and outlines various performance metrics under different conditions. The document is intended for technical inquiries and emphasizes that specifications may vary slightly from the indicated values.

Uploaded by

Tú Trần Tuấn
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
6 views1 page

ACCC507

The ACCC®-Warsaw data sheet provides detailed mechanical and electrical specifications for the conductor, including dimensions, mass, tensile strength, and resistance values. It specifies a maximum operating temperature of 180°C and outlines various performance metrics under different conditions. The document is intended for technical inquiries and emphasizes that specifications may vary slightly from the indicated values.

Uploaded by

Tú Trần Tuấn
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DATA SHEET:

ACCC®-Warsaw
NOT RELEASED

For questions, please contact CTC Application Engineering Department: applicationsupport@ctcglobal.com

Governing Units: Metric


Mechanical Specifications Metric Imperial
Nominal Aluminum Cross-sectional Area* 507.5 mm2 1001.5 kcmil
Nominal Diameter of Composite Core (CTC Part Number 200-008) 8.76 mm 0.345 in.
Nominal Cross-sectional Area of Core 60.3 mm2 0.093 in2
Overall Diameter of Conductor 27.72 mm 1.091 in.
Nominal Cross-sectional Area of the Conductor 567.8 mm2 0.880 in2
Ultimate Tensile Strength of Conductor1,2 158.7 kN 35.7 kips
Rated Strength of Core - 313 ksi (2158 MPa) 130.2 kN 29.3 kips
Core Nominal Mass per unit length 113 kg/km 76 lb/kft
Conductor Nominal Mass per unit length 1519.3 kg/km 1021.1 lb/kft
Aluminum Nominal Mass per unit length** 1406.3 kg/km 945.1 lb/kft
Maximum Allowable Operating Temperature at Surface4 180 o
C 356 o
F
o o
Coefficient of Linear Expansion Above Thermal Kneepoint 1.45E-06 /C 8.06E-07 /F
Coefficient of Linear Expansion Below Thermal Kneepoint 1.89E-05 /oC 1.05E-05 /oF
Final Modulus of Elasticity Above Thermal Kneepoint 116.0 GPa 16.8 Msi
Final Modulus of Elasticity Below Thermal Kneepoint 64.2 GPa 9.3 Msi

Electrical Specifications Metric Imperial


Nominal Resistivity of Aluminum at 20ºC, DC 63% IACS 0.0553 ohm/km 0.0890 ohm/mile
Temperature Coefficient of Resistance 0.00403 0.00403
Frequency 50 Hz 60 Hz
AC Nominal Resistance at 25ºC 0.0573 ohm/km 0.0928 ohm/mile
AC Nominal Resistance at 75ºC 0.0683 ohm/km 0.1104 ohm/mile
AC Nominal Resistance at 180ºC 0.0914 ohm/km 0.1474 ohm/mile
1112 @ 100C & 50 Hz
AC Current Rating at Given Temperature3
1673 @ 180C & 50 Hz
GMR (estimated) 0.011 m 0.037 ft
Inductive Reactance 0.207 ohm/km 0.401 ohm/mile
Capacitive Reactance 0.177 Mohm-km 0.092 Mohm-mile

*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 522.4 sq. mm (1031 kcmil)

**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.

1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.

2) Strength at ambient temperature

3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation

4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).

The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.

F-730-096-E ACCC-TW 508 (1002 kcmil) Warsaw Data Sheet www.ctcglobal.com Date Produced: 7/10/2015

You might also like