Firestop Acrylic Sealant
CP 606
2135090 A1-03.2016
41°F to
77°F (DD) / MM / YYYY
(5°C to
25°C)
en Before handling and for specific application details, refer to Hilti product literature, 3rd party published listings and
national approvals. For industrial use only.
fr Avant toute utilisation et pour tout détail concernant une application, se référer à la documentation Hilti, à la liste de
US: www.us.hilti.com publications des tierces parties et aux approbations nationales. Seulement pour utilisateurs professionnels.
CA: www.hilti.ca es Antes de usar y para detalles específicos de aplicación, véase la información que acompaña al producto Hilti, el
www.hilti.com
listado publicado por terceros y las aprobaciones nacionales. Solamente para los usuarios profesionales.
Joint
1 2 3 4
Penetration
1 2 3 4
Printed: 01.06.2016 | Doc-Nr: PUB / 5284163 / 000 / 00
Hilti Firestop Acrylic Sealant CFS-S ACR; CP 606
Safety Data Sheet
according to the United Nations GHS (Rev. 4, 2011)
Date of issue: 07/01/2016 Revision date: 07/01/2016 Supersedes: 07/01/2016
Version: 4.2
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1. Product identifier
Product form Mixture
Name Hilti Firestop Acrylic Sealant CFS-S ACR; CP 606
Product code BU Chemicals
1.2. Relevant identified uses of the substance or mixture and uses advised against
No additional information available
1.3. Details of the supplier of the safety data sheet
Hilti (South Africa) (Pty) Ltd.
2 Tugela Lane, Waterfall Logistics Precinct
1685 Midrand - South Africa
T +2711 237300 - F +2711 2373111
Customercare.za@hilti.com
Supplier Department issuing data specification sheet
Hilti (South Africa) (Pty) Ltd. Hilti AG
2 Tugela Lane, Waterfall Logistics Precinct Feldkircherstraße 100
1685 Midrand - South Africa 9494 Schaan - Liechtenstein
T +2711 237300 - F +2711 2373111 T +423 234 2111
Customercare.za@hilti.com chemicals.hse@hilti.com
1.4. Emergency telephone number
Emergency number Schweizerisches Toxikologisches Informationszentrum – 24h Service
+41 44 251 51 51 (international)
+2711 237300
SECTION 2: Hazards identification
2.1. Classification of the substance or mixture
Classification according to the United Nations GHS (Rev. 4, 2011)Mixture/Substance: SDS EU 2015: According to Regulation (EU)
2015/830 (REACH Annex II)
Not classified
2.2. Label elements
Labelling according to the United Nations GHS (Rev. 4, 2011)
No labelling applicable
2.3. Other hazards
No additional information available
SECTION 3: Composition/information on ingredients
3.1. Substance
Not applicable
07/01/2016 EN (English) 1/6
Hilti Firestop Acrylic Sealant CFS-S ACR; CP 606
Safety Data Sheet
according to the United Nations GHS (Rev. 4, 2011)
3.2. Mixture
SECTION 4: First aid measures
4.1. Description of first aid measures
First-aid measures after inhalation Get medical advice/attention if you feel unwell.
First-aid measures after skin contact Wash skin with plenty of water. If skin irritation occurs: Get medical advice/attention.
First-aid measures after eye contact Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to
do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
First-aid measures after ingestion Get medical advice/attention if you feel unwell.
4.2. Most important symptoms and effects, both acute and delayed
No additional information available
4.3. Indication of any immediate medical attention and special treatment needed
No additional information available
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media Water spray. Dry powder. Foam. Carbon dioxide.
5.2. Special hazards arising from the substance or mixture
No additional information available
5.3. Advice for firefighters
Protection during firefighting Self-contained breathing apparatus. Complete protective clothing.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1.For non-emergency personnel
No additional information available
6.1.2.For emergency responders
Protective equipment For further information refer to section 8: "Exposure controls/personal protection".
6.2. Environmental precautions
No additional information available
6.3. Methods and material for containment and cleaning up
Methods for cleaning up Recover mechanically the product.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling Wear personal protective equipment.
Hygiene measures Wash contaminated clothing before reuse. Do not eat, drink or smoke when using this product.
Always wash hands after handling the product.
07/01/2016 EN (English) 2/6
Hilti Firestop Acrylic Sealant CFS-S ACR; CP 606
Safety Data Sheet
according to the United Nations GHS (Rev. 4, 2011)
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions Keep cool. Store in a dry place.
Storage temperature 5 - 25 °C
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
No additional information available
8.2. Exposure controls
Personal protective equipment Protective clothing. Safety glasses. Gloves.
Hand protection Protective gloves. EN 374.
Eye protection Safety glasses. EN 166. EN 170.
Skin and body protection Wear suitable protective clothing.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state Liquid
Appearance Pasty.
Molecular mass Not determined
Colour red. white. Grey.
Odour characteristic.
Odour threshold Not determined
pH ≈ 9 Not applicable
Relative evaporation rate (butylacetate=1) No data available
Melting point Not applicable
Freezing point No data available
Boiling point No data available
Flash point Not applicable
Auto-ignition temperature No data available
Decomposition temperature No data available
Flammability (solid, gas) Not applicable
Vapour pressure No data available
Relative vapour density at 20 °C No data available
Relative density No data available
Density 1.6 g/cm³
Solubility No data available
Log Pow No data available
Viscosity, kinematic No data available
Viscosity, dynamic No data available
Explosive properties No data available
Oxidising properties No data available
Explosive limits No data available
07/01/2016 EN (English) 3/6
Hilti Firestop Acrylic Sealant CFS-S ACR; CP 606
Safety Data Sheet
according to the United Nations GHS (Rev. 4, 2011)
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
The product is non-reactive under normal conditions of use, storage and transport.
10.2. Chemical stability
Stable under normal conditions.
10.3. Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
10.4. Conditions to avoid
None under recommended storage and handling conditions (see section 7).
10.5. Incompatible materials
No additional information available
10.6. Hazardous decomposition products
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Acute toxicity (oral) Not classified
Skin corrosion/irritation Not classified
pH: ≈ 9 Not applicable
Serious eye damage/irritation Not classified
pH: ≈ 9 Not applicable
Respiratory or skin sensitisation Not classified
Germ cell mutagenicity Not classified
Carcinogenicity Not classified
Reproductive toxicity Not classified
Specific target organ toxicity (single exposure) Not classified
Specific target organ toxicity (repeated Not classified
exposure)
Aspiration hazard Not classified
SECTION 12: Ecological information
12.1. Toxicity
Ecology - general The product is not considered harmful to aquatic organisms or to cause long-term adverse
effects in the environment.
12.2. Persistence and degradability
No additional information available
07/01/2016 EN (English) 4/6
Hilti Firestop Acrylic Sealant CFS-S ACR; CP 606
Safety Data Sheet
according to the United Nations GHS (Rev. 4, 2011)
12.3. Bioaccumulative potential
No additional information available
12.4. Mobility in soil
No additional information available
12.5. Other adverse effects
No additional information available
SECTION 13: Disposal considerations
13.1. Waste treatment methods
Waste treatment methods Dispose of contents/container in accordance with licensed collector’s sorting instructions.
Waste disposal recommendations Dispose in a safe manner in accordance with local/national regulations.
SECTION 14: Transport information
In accordance with ADR / RID / IMDG / IATA / ADN
14.1. UN number
Not regulated for transport
14.2. UN proper shipping name
Proper Shipping Name (ADR) Not applicable
Proper Shipping Name (IMDG) Not applicable
Proper Shipping Name (IATA) Not applicable
Proper Shipping Name (ADN) Not applicable
Proper Shipping Name (RID) Not applicable
14.3. Transport hazard class(es)
ADR
Transport hazard class(es) (ADR) Not applicable
IMDG
Transport hazard class(es) (IMDG) Not applicable
IATA
Transport hazard class(es) (IATA) Not applicable
ADN
Transport hazard class(es) (ADN) Not applicable
RID
Transport hazard class(es) (RID) Not applicable
14.4. Packing group
Packing group (ADR) Not applicable
Packing group (IMDG) Not applicable
Packing group (IATA) Not applicable
Packing group (ADN) Not applicable
Packing group (RID) Not applicable
07/01/2016 EN (English) 5/6
Hilti Firestop Acrylic Sealant CFS-S ACR; CP 606
Safety Data Sheet
according to the United Nations GHS (Rev. 4, 2011)
14.5. Environmental hazards
Dangerous for the environment No
Marine pollutant No
Other information No supplementary information available
14.6. Special precautions for user
- Overland transport
- Transport by sea
No data available
- Air transport
No data available
- Inland waterway transport
Carriage prohibited (ADN) No
Not subject to ADN No
- Rail transport
Carriage prohibited (RID) No
14.7. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code
SECTION 15: Regulatory information
15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
No additional information available
SECTION 16: Other information
SDS_UN_Hilti
This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and
environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product
07/01/2016 EN (English) 6/6
88 Empire Drive • St. Paul, Minnesota • 55103
(651) 642-1150 • fax (651) 642-1239
VOC Content Test Certificate
October 26, 2009
Supplier: Hilti Entwicklungsgesellschaft mbH
BU Chemicals
Hiltistrasse 6
86916 Kaufering
GERMANY
Sample Description: Hilti CP 606
Date tested: July 20, 2009
Test Method: SCAQMD method 304-91 Determination of Volatile Organic Compounds
(VOC) in various materials as referenced by South Coast Air Quality
Management District (SCAQMD) rule 1168. The values also comply with the
requirements of EPA test method #24.
Test Data: Legend Project Number 0903311
Specification Product
LEED 2009 (LEED 3.0)
LEED 2.2
IEQ-4.1: Low-Emitting Materials –
Architechtural Sealant Hilti
Green Building Council of Australia
Green Star Office Design 3.0, IEQ-13
CP 606
Green Star Office Design 2.0, IEQ-13
Green Star Office Interiors 1.1, IEQ-11
Architectural Sealant;
Product contains: 75 g/L of VOC
VOC Limit: 250 g/L
William Welbes Allen Noreen, Ph.D.
Vice President of Laboratory Operations Technical Director
