Assembly Instructions

Thank you for downloading the "YZF-R1"paper craft model. By simply

following this manual while referring to the names and numbers shown
on the parts sheets, you can assemble an authentic-looking replica of
the YZF-R1.

Assembly instructions: Twenty A4-sized sheets.

Paper craft: Twenty-two A4-sized sheets with 312 parts in all

These instructions apply only to the "YZF-R1". These Paper Craft parts
are easier to work with when printed out on strong, thick paper (like postcard
stock).

2007.11.12
 Note

To begin Basic working method and markings

Tools and materials needed

-Ruler - scissors - blade cutter or "Exacto-knife" - awl or
other pointed tool (for making a folding crease) - felt pen Solid lines
- pin set - glue - hand towel ( for cleaning your fingers) - Fold along these lines.
dictionary or other heavy book ( to press the papers flat). The printed surface should be
on the outside of the folded shape.
Items of Caution
*Take care when using sharp or pointed objects or when
Broken lines
using bladed cutting tools. Place a heavy sheet of paper
Fold along these lines.
under the paper you want to cut.
The printed surface should be
*Use glue and other adhesives only in well-ventilated
on the inside of the folded shape.
areas.
*When printing, use a slightly reduced font size. There
may be differences in dimensions, depending on the Dotted line
type of printer used. Cut along these lines.

How to assemble

*Follow the working method and markings carefully.

*Cut carefully along the outter line with cutting blade, Do not fold or cut the parts
Exacto-knife or scissors. marked .

One - point Advice

*Cut carefully with cutting blade, Exacto-knife or
scissors.

*For folding parts, first use an awl or other pointed

Cut out parts marked with an
tool to make a light crease along the dotted or solid
asterisk(*).
line. This will make the folds straight. Avoid making
strong creases, as this will cause the paper to tear.

*As an adhesive, white wood glue is recommended.

Avoid over application as this may cause the paper to
Red dots are the reference
wrinkle.
positions for gluing surfaces.
*Before beginning assembly, test adhesive amounts
on extra paper.

*Occasionally, white spots will be apparent on folds

and cuts. Use a marker or pencil to fill in these spots. Please glue them by aligning
It is recommended that this be done after each stage the red and red/blue and blue
of assembly because coloring becomes more difficult parts if they are marked on
once parts are assembled. the paper.

2
 1 Assembling the Front Cowl & Front Fender
First, assemble each component by following the working

method and markings. Then, refer to the illustration and Indication of Working Methods Fold or Curve Glue
photos below to glue the parts together.

Front Cowl Fold each relevant part according to the assembly symbols.

Sheet A, 8 parts in total Please use the dots on each component as reference when gluing surfaces.

Glue in order from 1 to 4 on the graphic. Reference photo

A- 2
A- 6

2
A- 7

2
A- 8
3
A- 3

4 1 3

A- 4

A- 5

A- 1

Front Fender Reference photo

Sheet B, 3 parts in total
B- 1

B- 2

B- 3

3
 2 Assembling the Meter & Brake Caliper
First, assemble each component by following the working

method and markings. Then, refer to the illustration and Indication of Working Methods Fold or Curve Glue
photos below to glue the parts together.

Meter Fold each relevant part according to the assembly symbols.

Sheet B, 12 parts in total Please use the dots on each component as reference when gluing surfaces.

Glue in order from 1 to 8 on the graphic. Reference photo

B- 10
B- 5

B- 6

B- 11

6 4 1
B- 13

3
B- 12
4 B- 7
2
7
B- 4 8
3 B- 8
2

5 B- 9
B- 14

B- 15

Brake Caliper Reference photo

Sheet B, 6 parts in total

Glue in order from 1 to 2 on the graphic.

B- 16(19)
*Assemble both sides. The diagram
shows the left side. The number inside
the ( ) is for the right side.

B- 17(20)

2
1

B- 18(21)

4
 3 Assembling the Steering
First, assemble each component by following the working

method and markings. Then, refer to the illustration and Indication of Working Methods Fold or Curve Glue
photos below to glue the parts together.

Steering Fold each relevant part according to the assembly symbols.

Sheet B, 19 parts in total Please use the dots on each component as reference when gluing surfaces.

Glue in order from 1 to 6 on the graphic.

B- 26 B- 22

[ Upper Steering Column ]

B- 28
DO NOT glue the upper and the lower parts
of the steering column at this stage.
1 B- 25

B- 27

B- 34 B- 31
5
2 1
5

B- 32
2
B- 33
B- 24

[ Lower Steering Column ]

6 B-23

B- 35

Reference photo

B- 36

3
4

B- 38

B- 37

B- 40

B- 30

B- 29
B- 39

5
 4 Assembling the Frame 1
First, assemble each component by following the working

method and markings. Then, refer to the illustration and Indication of Working Methods Fold or Curve Glue
photos below to glue the parts together.

Frame 1 Fold each relevant part according to the assembly symbols.

Sheet C, 18 parts in total Please use the dots on each component as reference when gluing surfaces.

Glue in order from 1 to 12 on the graphic.

C- 6 C- 4

10

C- 8

7
C- 18

8
9 C- 16
C- 15

6 6

11
C- 17

C- 3 6
12

C- 1
8
C- 2 9

10

C- 14

4
12

3
C- 5
5 C- 7

C- 13

2 C- 12
C- 11
C- 9

C- 10 1

Reference photo

6
 5 Assembling the Frame 2 & Fuel Tank
First, assemble each component by following the working

method and markings. Then, refer to the illustration and Indication of Working Methods Fold or Curve Glue
photos below to glue the parts together.

Frame2 Fold each relevant part according to the assembly symbols.

Sheet B, 7 parts in total Please use the dots on each component as reference when gluing surfaces.

Reference photo

C- 19 C- 20

C- 24
C- 25

C- 21

C- 23

C- 22

Fuel Tank Reference photo

Sheet D, 2 parts in total

D- 1

D- 2

7
 6 Assembling the Under Cowl
First, assemble each component by following the working

method and markings. Then, refer to the illustration and Indication of Working Methods Fold or Curve Glue
photos below to glue the parts together.

Under Cowl Fold each relevant part according to the assembly symbols.

Sheet E, 13 parts in total Please use the dots on each component as reference when gluing surfaces.

Glue in order from 1 to 7 on the graphic.

E- 12

E- 8 E- 11
E- 6

3
E- 7
2
3
1
E- 10
3
2
7 4
3
E- 4 4
E- 9

4
4

E- 3

E- 1
E- 5

5
6 E- 2

6
6

E- 13

Reference photo

8
 7 Assembling the Seat Cowl & Taillight
First, assemble each component by following the working

method and markings. Then, refer to the illustration and Indication of Working Methods Fold or Curve Glue
photos below to glue the parts together.

Seat Cowl Fold each relevant part according to the assembly symbols.

Sheet F, 13 parts in total Please use the dots on each component as reference when gluing surfaces.

Glue in order from 1 to 10 on the graphic. Reference photo

F- 1,2

F- 10

9
F- 11
F- 9

1
2

F- 4
F- 3

3
3 F- 12

10 8 4
6
7
7
5 8
8
F- 5

F- 8 8

8
F- 13
F- 6
F- 7

Taillight Reference photo

Sheet G, 13 parts in total G- 1

Glue in order from 1 to 8 on the graphic.

G- 9

G- 4
6

G- 7
1
2 G- 5

7 5
G- 6 7 2
G- 8 1

G- 2
8
G- 3

3
3
G- 13

G- 10

G- 11
G- 12

9
 8 Assembling the Rear Suspension & Rear Arm
First, assemble each component by following the working

method and markings. Then, refer to the illustration and Indication of Working Methods Fold or Curve Glue
photos below to glue the parts together.

Rear Suspension Fold each relevant part according to the assembly symbols.

Reference photo
Sheet C, 12 parts in total Please use the dots on each component as reference when gluing surfaces.

Glue in order from 1 to 6 on the graphic.

H- 1
* Do not paste H-10 & H-11.
H- 2

H- 4

5 H- 11

4 H- 7

H- 6
4 4

3
1 3
6
H- 5
H- 3

H- 8
2

H- 10

H- 9

Rear Arm I- 14

Reference photo
Sheet I, 15 parts in total

Glue in order from 1 to 13 on the graphic. I- 15

I- 9
I- 11
5

I- 8
6
8 13
7

12
11
I- 12,13
13
I- 5
I- 10

I- 1
9
I- 7 4

10 I- 4

1 3

2
I- 2 3
10

I- 3 I- 6

10
 9 Assembling the Engine
First, assemble each component by following the working

method and markings. Then, refer to the illustration and Indication of Working Methods Fold or Curve Glue
photos below to glue the parts together.

Engine
Sheet J, 34 parts in total

Glue in order from 1 to 23 on the graphic.

J- 10

J- 8
J- 7
8
7 J- 9
J- 6
8
J- 26,27

J- 28 J- 20,21,22,23,24,25

7
J- 5
10 J- 29

J- 19
14
11 J- 30

J- 32

4
12

J- 33 13 J- 16

21
9 22

J- 4 20
J- 1 9

J- 14
J- 3 19
3 J- 31

18
6
J- 18
17

6 15
16
J- 34

23 2

J- 12
1
J- 2
5

J- 17

J- 11
J- 15
J- 13
Reference photo

11
 10 Assembling the Radiator & Stand
First, assemble each component by following the working

method and markings. Then, refer to the illustration and Indication of Working Methods Fold or Curve Glue
photos below to glue the parts together.

Radiator Fold each relevant part according to the assembly symbols.

Sheet J, 18 parts in total Please use the dots on each component as reference when gluing surfaces.

Reference photo
J- 44

J- 43

J- 45
J- 42

J- 46

J- 47

J- 50

J- 52
J- 35

J- 51
* Do not paste J-48 & J-49.

J- 36

J- 48

J- 37 J- 49

J- 39
J- 40

J- 38

J- 41

Stand Reference photo

Sheet K, 10 parts in total

Glue in order from 1 to 5 on the graphic.

* Do not paste K-2 & K-8.

K- 2
* Do not paste K-1 & K-7.
K- 8
K- 7

5 K- 1
2

K- 9
K- 4
2

1
K- 10 K- 3
K- 6
4 3

4 1

K- 5

12
 11 Assembling the Exhaust Pipes
First, assemble each component by following the working

method and markings. Then, refer to the illustration and Indication of Working Methods Fold or Curve Glue
photos below to glue the parts together.

Exhaust Pipes Fold each relevant part according to the assembly symbols.

Sheet L, 60 parts in total Please use the dots on each component as reference when gluing surfaces.

L- 58
*Assemble both sides. The diagram L- 56
L- 60
shows the left side. The number inside
the ( ) is for the right side. L- 54
L- 52
L- 57
L- 50

L- 48
* Do not paste
L-52 & L-54.

L- 55

* Do not paste L-39 & L-48. L- 53

L- 51 * Do not paste L- 59

L- 39 L- 49 L-51 & L-53.

L- 47 * Do not paste
L- 40 L-42 & L-47.
L-1(2)
L- 42
L- 44
L- 43
L-3(4)
L- 41 L- 37
L- 45

L-15(16) L- 36
L-5(6)

L- 46
L- 35
L-7(8)
* Do not paste
L-38 & L-41,46.
L- 34
L- 17(18)
L- 38

L-9(10) L- 33

L- 32
L-11(12)
L- 19(20)
L-13(14) L- 31

L- 30
* Do not paste L-30 & L-31.

L- 21(22)
L- 29

L- 23 (24)
* Do not paste L-13,14,L-27,28 & L-29. Reference photo
L- 25(26) L-27(28)

13
 12 Assembling the Left footrests & Right footrests
First, assemble each component by following the working

method and markings. Then, refer to the illustration and Indication of Working Methods Fold or Curve Glue
photos below to glue the parts together.

Left footrests Fold each relevant part according to the assembly symbols.

Sheet M, 6 parts in total Please use the dots on each component as reference when gluing surfaces.

Glue in order from 1 to 6 on the graphic. Reference photo

M- 6

M- 1

M- 2

M- 4

M- 5

M- 3

Right footrests Reference photo

Sheet M, 11 parts in total M- 7

Glue in order from 1 to 10 on the graphic.

1 M- 8

3
M- 15 M- 14

M- 10

4
2
M- 16

M- 17
5
6
10
M- 13 9

8
M- 9

M- 12
M- 11

14
 13 Assembling the Front Tire
First, assemble each component by following the working

method and markings. Then, refer to the illustration and Indication of Working Methods Fold or Curve Glue
photos below to glue the parts together.

Front Tire Fold each relevant part according to the assembly symbols.

Sheet N, 17 parts in total Please use the dots on each component as reference when gluing surfaces.

Glue in order from 1 to 5 on the graphic.

5
1

N- 14

5
N- 17
N- 12
3

4
N- 8

N- 10

N- 2
N- 16

N- 3
N- 15

N- 6
3

N- 1

N- 9

N- 11

N- 5 N- 4 N- 7
N- 13
Reference photo

15
 14 Assembling the Rear Tire
First, assemble each component by following the working

method and markings. Then, refer to the illustration and Indication of Working Methods Fold or Curve Glue
photos below to glue the parts together.

Rear Tire Fold each relevant part according to the assembly symbols.

Sheet O, 17 parts in total Please use the dots on each component as reference when gluing surfaces.

Glue in order from 1 to 5 on the graphic.

2 5

5
O- 17
O- 13

3
O- 11

O- 8

O- 9
O- 10
4

O- 2

O- 16

1 O- 12
O- 15

O- 1 O- 3
2

3
O- 6

O- 5 O- 7

O- 14 Reference photo
O- 4

16
 15 Finish
Please use the dots on each component as reference when gluing surfaces.
Fuel Tank Seat Cowl Taillight
6
Connect each of the previously assembled parts in
order from 1 - 22 according to the diagram.
Front Cowl
7
1 Glue the radiator to the engine.
2 Glue the engine to the frame 1.
Frame 2
3 Glue the rear arm to the frame 1. Upper Steering Column Right 8
16
footrests
4 Glue the rear suspension 1 to the frame 1.
Meter 9
12

Exhaust Pipes3
Glue the rear suspension 2 to the frame 1. 10
5

6 Glue the taillight to the seat cowl.

Exhaust Pipes2
7 Glue the exhaust pipes 3 to the seat cowl.
Lower Steering Column Left
8 Glue the seat cowl to the frame 2.
14
10
footrests Rear Suspension1
9 Glue the tank to the frame 2.
Glue the frame 2 to the frame 1.
Frame 1 22

Rear Tire
10
4
13
11 Glue the exhaust pipes 1 to the engine.
Front Fender 2
21
12
12 Insert exhaust pipes 2 into exhaust pipes 1 and 3.
Engine
13 Put the lower part of the steering through the frame and 2
glue it to the upper part of the steering. 3 20
14 Glue the meter to the frame 1.
Glue the under cowl to the frame 1. 16
15

16 Glue the front cowl to the under cowl.

19 5
5 Rear Arm
17 Glue the brake caliper to the front tire. 1 11
15
18 Glue the front tire to the lower steering column. 18

19 Glue the front fender to the lower steering column. 1

Exhaust
20 Glue the rear tire to the rear arm.
11
Pipes1 Rear Suspension2
17
21 Glue the left footrests to the frame 1.
22 Glue the right footrests to the frame 1.

Front Tire
Brake Caliper 17 Radiator Under Cowl

17
 16 Assembled Model and the List of Parts
Please refer to the photo below when attaching each component.

Exhaust Pipes Seat Cowl Fuel Tank

Sheet L, 60 parts in total Sheet F, 13 parts in total Sheet D, 2 parts in total

Right footrests Under Cowl Steering Front Cowl

Sheet M, 11 parts in total Sheet E, 13 parts in total Sheet B, 19 parts in total Sheet A, 8 parts in total

18
 16 Assembled Model and the List of Parts
Please refer to the photo below when attaching each component.

Front Tire Engine Rear Tire

Sheet N, 17 parts in total Sheet J, 34 parts in total Sheet O, 17 parts in total

Front Fender Rear Suspension Left footrests Taillight

Sheet B, 3 parts in total Sheet H, 11 parts in total Sheet M, 6 parts in total Sheet G, 13 parts in total

19
 16 Assembled Model and the List of Parts
Please refer to the photo below when attaching each component.

Frame 1 Frame 2 Meter

Sheet c, 18 parts in total Sheet c, 7 parts in total Sheet B, 12 parts in total

Brake Caliper Radiator Rear Arm

Sheet B, 6 parts in total Sheet J, 18 parts in total Sheet I, 15 parts in total

20
 Color Version
FRONT COWL A

8 10 9 7
6

1
4
 Color Version
STEERING B

12 13

10 11

17

18
4

15

7 16 14

6 8

2 5
3 1
 Color Version
FRAME C

3
6

4
 Color Version
FRAME C
16 22

23
15 21

17 20 11

13 18

7 8
14 19
12

9 10
 Color Version
FUEL TANK D

4
 Color Version
ENGINE E

2 1

9
6

10

3
7

11

4 12 13
 Color Version
ENGINE E

23

19

20

24

21 22

26 25

15 17

18
14
16
 Color Version
UNDER COWL F

12 13

11 14

9
8

10

5 1 4
 Color Version
EXHAUST G
1 2 3 4 25

5 8
6 7

20
23
9 10 11 12

19

21

18

24
22

26

13 16

15
17 14
 Color Version
REAR ARM H

3
11

10
7
5
6
 Color Version
SEAT COWL I
8 7

9 6

4
10
3

2
5
11

12

1
13
 Color Version
FRONT TIRE J

4
 Color Version
REAR TIRE K

3
 Color Version
FRONT WHEEL • REAR WHEEL L

1 2

8
9

4
10 11

5 6 12 13
 PAPER CRAFT
Assembly Instructions

Thank you for downloading the "YZF-R1" paper craft model. By simply
following this manual while referring to the names and numbers shown on the
parts sheets, you can assemble an authentic-looking replica of the YZF-R1.

Assembly instructions: Fifteen A4-sized sheets.

Paper craft: Fourteen A4-sized sheets with 170 parts in all

These instructions apply only to the "YZF-R1".

These Paper Craft parts are easier to work with when printed out on strong,
thick paper (like postcard stock).
*In creating these Paper Craft models we use 135kg Kent paper stock (0.18mm).
 Note

TO BEGIN Basic working method and markings

Tools and materials needed Solid lines

-Ruler -Scissors - Blade cutter or "Exacto-knife" - Awl or Fold along these lines. The printed
other pointed tool (for making a folding crease) - Felt surface should be on the outside of
pen - Pin set - Glue - Hand towel ( for cleaning your the folded shape.
fingers) - Dictionary or other heavy book ( to press the
papers flat)
Broken lines
Item of Caution
Fold along these lines. The printed
*Take care when using sharp or pointed objects or when
surface should be on the inside of
using bladed cutting tools. Place a heavy sheet of paper
the folded shape.
under the paper you want to cut.
*Use glue and other adhesives only in well-ventilated
areas. Dotted line
*When printing, use a slightly reduced font size as there
are many differences in dimensions depending on the Cut along these lines
type of printer used.

HOW TO ASSEMBLE
Cut out parts marked with an as-
terisk(*).
*Follow the working method and markings carefully.
*Cut carefully along the outter line with a cutting blade,
Exacto-knife or scissors.

One - point Advice Red dots are the reference positions

for gluing surfaces.
*Cut carefully with a cutting blade, Exacto-knife or
scissors.

*For folding parts, first use an awl or other pointed

tool to make a light crease along the dotted or solid
line. This will make the folds straight. Avoid making
strong creases, as this will cause the paper to tear.

*As an adhesive, white, wood glue is recommended.

Avoid over application as this will cause the paper
to wrinkle.

*Before beginning assembly, test adhesive amounts

on extra paper.

*Occasionally, white spots will be apparent on folds

and cuts. Use a marker or pencil to fill-in these spots.
It is recommended that this be done after each stage
of assembly because coloring becomes more diffi-
cult once parts are assembled.

-2-
 1 Assembling the Front Cowl
First, assemble each component by following the
Indication of
working method and markings. Then, refer to the il-
Working Methods Fold or Curve Adhere
lustration and photos below to glue the parts together.

FRONT COWL Please use the dots on each component as reference when gluing surfaces.
Sheet A, 10 parts in total

A-3
A-6
Glue this section from
the inside of A-1.

A-7
A-8

A-2

A-9
A-10

A-1

A-5
A-4

A-1
Reference photo

Fold the parts as shown above so that the dotted lines on

the gluing surfaces are lined up before gluing each sec-
tion.

-3-
 2 Assembling the Steering
First, assemble each component by following the
Indication of
working method and markings. Then, refer to the il-
Working Methods Fold or Curve Adhere
lustration and photos below to glue the parts together.

STEERING
Sheet B, 18 parts in total
B-18

Please use the dots on each component as

reference when gluing surfaces.

B-2 B-1

B-3
B-4

Fold the parts as shown above so that

B-8 the dotted lines on the gluing surfaces
are lined up before gluing each section.

B-5

B-9
B-7
B-6
B-10
Be careful not to leave any glue on B-5,
B-11 8 and 9 when inserting B-10 and 11.

Apply glue on the area

indicated in the illustration.
Reference photo

B-18

B-13
B-12

B-14
B-15

B-16
B-17

-4-
 3 Assembling the Frame
First, assemble each component by following the
Indication of
working method and markings. Then, refer to the il-
Working Methods Fold or Curve Adhere
lustration and photos below to glue the parts together.

FRAME After assembling both Frames A and B, glue the two on the gluing surface shown below.
Sheet C (x2), 23 parts in total Please use the dots on each component as reference when gluing surfaces.

[Frame A] Gluing surface C-1

(to Frame B)
C-1
C-5

C-6

Crease well in this area on

both sides of the component.

Fold the parts as shown above so that

C-2 corresponding gluing areas are lined up
before gluing each section.
C-4 C-3
Be sure to assemble in
the right direction

C-11 C-12
C-7
Be sure to assemble in
the right direction
[Frame B]
C-8
Be sure to assemble in
the right direction
C-15
C-16
C-17
C-13
Gluing surface C-14
(to Frame A)

C-18
C-9 C-19
C-20
C-10
C-21
C-22

Reference photo

C-23

-5-
 4 Assembling the Fuel Tank
First, assemble each component by following the
Indication of
working method and markings. Then, refer to the il-
Working Methods Fold or Curve Adhere
lustration and photos below to glue the parts together.

FUEL TANK
Sheet D 4 parts in total
D-1

Please use the dots on each component as

reference when gluing surfaces.

D-1

D-2 Fold the parts as shown above so that

the dotted lines on the gluing surfaces
are lined up before gluing each section.

D-4

D-3

D-2
Reference photo

Fold the parts as shown above so that the dotted lines on

the gluing surfaces are lined up before gluing each sec-
tion.

-6-
 5 Assembling the Engine
First, assemble each component by following the
Indication of
working method and markings. Then, refer to the il-
Working Methods Fold or Curve Adhere
lustration and photos below to glue the parts together.

ENGINE Please use the dots on each component as reference when gluing surfaces.
Sheet E, 26 parts in total

E-2 E-4

E-5
E-1 E-6
E-7
E-8
E-9
E-10
E-3
E-11

E-14

E-12 E-17

E-18
E-13

E-16 E-15

E-23

E-22
E-19
E-21
E-24 E-20
E-26

E-25

Reference photo

-7-
 6 Assembling the Under Cowl
First, assemble each component by following the
Indication of
working method and markings. Then, refer to the il-
Working Methods Fold or Curve Adhere
lustration and photos below to glue the parts together.

UNDER COWL Please use the dots on each component as reference when gluing surfaces.
Sheet F, 14 parts in total

F-9
Glue this section from the inside of F-7

F-10
F-11 F-12 Glue this section from the
inside of F-8
F-8

F-13 F-14
F-7
F-4
Glue this section
from the inside of
F-1
F-5
Glue this section from the
inside of F-1

F-2

F-3
Gluing area Glue this section from the
inside of F-1
Apply glue in the area
indicated with blue dotted F-1
lines and attach them to
the back of F-7 and F-8.

Reference photo

F-6
Glue this section from the
inside of F-1

-8-
 7 Assembling the Exhaust
First, assemble each component by following the
Indication of
working method and markings. Then, refer to the il-
Working Methods Fold or Curve Adhere
lustration and photos below to glue the parts together.

EXHAUST After assembling both Exhaust Pipes A and B, glue the two on the gluing surface shown below.
Sheet G, 26 parts in total Please use the dots on each component as reference when gluing surfaces.

[Exhaust A]
When assembling G-1 through G-8, refer to the photo of the finished model
below to assemble them with the right angles.
G-17

G-1 G-13
G-2 G-14
G-3
G-4

Gluing surface
(to Exhaust B)
G-5
G-6
G-7
G-8
G-15
Apply glue on the area G-16
indicated in the illustration. G-9 G-11
G-10 G-12

[Exhaust B] G-26
When assembling G-18, 19, and 20, refer to the photo
of the finished model below to assemble them with
the right angles. G-22

G-21 G-25
G-24

G-20 G-23

G-19 Reference photo

Apply glue on the area

indicated in the illustration.

G-18

Gluing surface
(to Exhaust A)

-9-
 8 Assembling the Rear Arm
First, assemble each component by following the
Indication of
working method and markings. Then, refer to the il-
Working Methods Fold or Curve Adhere
lustration and photos below to glue the parts together.

REAR ARM Please use the dots on each component as reference when gluing surfaces.
Sheet H, 11 parts in total

Follow the step-by-step assembly instructions 1 2 3 shown below.

Assembly Instructions
Glue H-1 and H-2 together.
After assembling H-3 through the arm of H-1 as shown
in the illustration, glue H-3 to H-1 and H-2.
Glue H-6 to H-1.
Glue H-4 to H-1. H-4 should straddle H-3 and H-6. H-5

Refer to the illustration to assemble other parts.

H-4

H-1

H-2

H-6

H-3
Reference photo

H-7
H-8
H-9
H-10

H-11

- 10 -
 9 Assembling the Seat Cowl
First, assemble each component by following the
Indication of
working method and markings. Then, refer to the il-
Working Methods Fold or Curve Adhere
lustration and photos below to glue the parts together.

SEAT COWL Please use the dots on each component as reference when gluing surfaces.
Sheet I, 13 parts in total

I-4

I-3
I-1

I-2

I-10
I-6
I-7

I-12
I-11 I-8 I-9

I-5

I-13

I-1 I-2

Reference photo

Fold the parts as shown above so that the dotted lines on

the gluing surfaces are lined up before gluing each sec-
tion.

- 11 -
 10 Assembling the Front and Rear Tires
First, assemble each component by following the
Indication of
working method and markings. Then, refer to the il-
Working Methods Fold or Curve Adhere
lustration and photos below to glue the parts together.

FRONT TIRE Insert the assembled wheel in the assembled tire before gluing them together.
Sheet J & L, 12 parts in total Please use the dots on each component as reference when gluing surfaces.

[Front Tire] [Front Wheel] L-3

L-1 L-2

L-4
L-5
L-6 Reference photo
J-1 Gluing area
Assemble J-1 in the
same manner

J-2
J-6

J-3

Gluing area J-4

Assemble J-2 in the
same manner
J-5

REAR TIRE Insert the assembled wheel in the assembled tire before gluing them together.
Sheet K & L, 13 parts in total Please use the dots on each component as reference when gluing surfaces.

[Rear Tire] [Rear Wheel]

L-8 L-7

L-12
L-9 L-13
L-10
L-11
Reference photo
K-1
Gluing area
Assemble K-1 in the
same manner
K-2

K-6
K-3

Gluing area K-4

Assemble K-2 in the
same manner K-5

- 12 -
 11 Finish
Assembly Instruction
glue the assembled parts in numerical order through .
Please use the dots on each component as reference when gluing surfaces.

Fuel Tank
Steering Frame
Seat Cowl

Ŷ
Front Cowl

Rear Tire
Rear Arm
Engine
Under Cowl Detailed Instructions for Assembling the
Frame and the Seat Cowl
After inserting the frame in
the Seat cowl up to the red
dotted lines, glue the two
together from the
inside.

Exhaust
Gluing area

Front Tire Apply glue

in the back

Insert the frame up to

these red dotted lines.

- 13 -
 12 Assembled Model and the List of Parts
Please refer to the photo below when attaching each component.

RIGHT FRONT
Seat Cowl
I-1 I-5 I-9
I-2 I-6 I-10 Front Cowl
I-3 I-7 I-11
Fuel Tank
I-4 I-8 I-12 D-1 D-3 A-1 A-6
I-13 D-2 D-4 A-2 A-7
A-3 A-8
A-4 A-9
A-5 A-10

Exhaust Front Tire Steering

G-1 G-7 G-13 G-19 G-19 G-25 J-1 J-7 B-1 B-7 B-13
G-2 G-8 G-14 G-20 G-20 G-26 J-2 J-8 B-2 B-8 B-14
G-3 G-9 G-15 G-21 G-21 J-3 J-9 B-3 B-9 B-15
G-4 G-10 G-16 G-22 G-22 J-4 J-10 B-4 B-10 B-16
G-5 G-11 G-17 G-23 G-23 J-5 J-11 B-5 B-11 B-17
G-6 G-12 G-18 G-24 G-24 J-6 J-12 B-6 B-12

- 14 -
 12 Assembled Model and the List of Parts
Please refer to the photo below when attaching each component.

LEFT Frame REAR

C-1 C-7 C-13 C-19
C-2 C-8 C-14 C-20 Rear Arm
C-3 C-9 C-15 C-21
C-4 C-10 C-16 C-22 H-1 H-4 H-7 F-10
C-5 C-11 C-17 C-23 H-2 H-5 H-8 F-11
C-6 C-12 C-18 H-3 H-6 H-9

Rear Tire
K-1 K-7
K-2 K-8
Engine K-3 K-9
K-4 K-10
Under Cowl E-1 E-7 E-13 E-19 E-19 E-25 K-5 K-11
F-1 F-4 F-7 F-10 F-13 E-2 E-8 E-14 E-20 E-20 E-26 K-6 K-12
F-2 F-5 F-8 F-11 F-14 E-3 E-9 E-15 E-21 E-21
F-3 F-6 F-9 F-12 E-4 E-10 E-16 E-22 E-22
E-5 E-11 E-17 E-23 E-23
E-6 E-12 E-18 E-24 E-24

- 15 -