CYLINDERS WITH PROFILED BARREL Series

Ø 32 to 100 mm - double acting 452

Type
ISO 15552-AFNOR-DIN PLS-DM
with adjustable pneumatic cushioning NS

GENERAL
Detection Equipped for magnetic position detectors
Fluid Air or neutral gas, filtered, lubricated or not
Operating pressure 10 bar max.
Ambient temperature –20°C to +70°C (for higher temperatures, contact us)
Optimal max. speed  1 m/s (for optimal service life)
Max. speed rate 2 m/s
Standards ISO 15552-AFNOR NF ISO 15552-DIN ISO 15552
(replace ISO 6431-AFNOR NFE 49003-VDMA 24562)
B
CONSTRUCTION
Barrel Hard anodised aluminium alloy
Front and rear ends Aluminium alloy
Barrel/end connection With screws
Bearing Self-lubricating metal
Cushioning seals PUR (polyurethane)
Cushioning Pneumatic, adjustable from both sides with captive screw
Rod Hard chrome plated steel
Rod nut Galvanised steel
Piston Ø 32 to 80 mm: POM (polyacetal)
Ø 100-125 mm: light alloy, fitted with an annular permanent magnet
Piston seals PUR (polyurethane)

SPECIFICATIONS
DEFINING THE CYLINDER CATALOGUE NUMBER
Standard version: profiled barrel with adjustable pneumatic cushioning, equipped for magnetic position detectors
To order, please specify:
■ CYLINDER : - The cylinder type (single rod, through rod)
- The cylinder diameter and its stroke
■ DETECTORS : The magnetic position detectors must be ordered separately :
- "T" model (see page P291), reed switch or magneto-resistive type

452 5 . . 0 . . . . .
▼ ▼ ▼

type Ø standard stroke (mm) (1) max.

(recommended standard strokes) stroke
position single through (mm)
25 50 80 100 125 160 200 250 320 400 500 630 700 800 900 1000 (mm)
cushioning detection rod rod
32 ● ● ● ● ● ● ● ● 1000
with equipped 00 0A 40 ● ● ● ● ● ● ● ● ● ● 1500
50-63 ● ● ● ● ● ● ● ● ● ● ● ● 1800
80 ● ● ● ● ● ● ● ● ● ● ● ● 2000
100 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 2000
(1) Other strokes on request.
Ordering example: cylinder Ø
- Profiled cylinder with pneumatic cushioning type Ø (mm)
Availability, design and specifications are subject to change without notice. All rights reserved.

equipped for detectors = 00 3 32

- Cylinder Ø 80 mm = 8
4 40
- Stroke 100 mm = 0100
5 50
Ordering catalogue number: 452500080100
6 63
8 80
1 100

OPTIONS
• Other strokes on request
• Piston rod in 316L stainless steel, catalogue number: 995002 - in 303 stainless steel, catalogue number: 995202
• Overlength piston rod in hard chrome steel, cat. no.: 995003 - in 316L stainless steel, cat. no.: 995004 - in 303 stainless steel, cat. no.: 995204
ACCESSORIES:
• Protective groove cover and detector cable holder - see page P291

MOUNTINGS: see Fluid Power catalogue page P229-18

VERSIONS: Guiding units, see Fluid Power catalogue page P239
00555GB-2011/R01

All leaflets are available on: www.asconumatics.eu

P229-1
 ISO 15552 CYLINDERS WITH PROFILED BARREL - SERIES 452
DIMENSIONS AND WEIGHT

DIMENSIONS (mm), WEIGHT (kg)

Bare cylinder
N + 1
A ZJ + 1 BG Ø RT
M L8 + 1
WH PL PL
L2 Ø EE VA E
= =
VD TG
KW = =

=
SINGLE

= =
TG
ROD

E
CYLINDER

=
d11
ØB d11
ØB
Ø KK Ø MM
KV ❉ SW ❉

A ZM + 2 A

THROUGH
ROD TYPE
CYLINDER

M L8 + 1 M + 1

1 Stroke
2 Stroke x 2
✻ Dimensions on flats

Ø A ØBd11 BG E ØEE ØKK KV KW L2 L8 M ØMM N PL ØRT SW(5) TG VD

VA min.

Availability, design and specifications are subject to change without notice. All rights reserved.
32 22 30 16 46,5 G1/8 M10x1,25 16 5 17 94 48 12 142 14 M6 10 32,5 ±0,5 4 4
40 24 35 16 52 G1/4 M12x1,25 18 6 19 105 54 16 159 16 M6 13 38 ±0,5 4 4
50 32 40 16 64 G14 M16x1,5 24 8 24 106 69 20 175 18,5 M8 17 46,5 ±0,5 4 4
63 32 45 16 74 G3/8 M16x1,5 24 8 24 121 69 20 190 19 M8 17 56,5 ±0,5 4 4
80 40 45 17 92 G3/8 M20x1,5 30 10 33 128 86 25 214 16,5 M10 22 72 ±0,5 4 4
100 40 55 17 109 G1/2 M20x1,5 30 10 35,5 138 91 25 229 19,5 M10 22 89 ±0,5 4 4

weight (3) Cylinder weight with 0 mm stroke

Ø WH ZJ ZM (4) Weight to be added per additional 100 mm length
(3) (4)
(5) Dimension SW changed as against standard AFNOR NFE 49 003.
32 26 120 146 0,417 0,256
NFE 49 003 ISO 15552
40 30 135 165 0,687 0,341
Ø 50-63 16 17
50 37 143 180 0,875 0,492
Ø 80-100 21 22
63 37 158 195 1,152 0,542
80 46 174 220 2,052 0,818
100 51 189 240 3,045 0,913
00555GB-2010/R01

Dimensional tolerances according to standard ISO 15552

All leaflets are available on: www.asconumatics.eu

P229-2