Soundcore Life U2
USER MANUAL
English 01 Português 53
Čeština 05 Pусский 57
Dansk 09 Slovenský Jazyk 61
Deutsch 13 Slovenski Jezik 65
ελληνικά 17 Svenska 69
Español 21 Türkçe 73
Suomi 25 77
Français 29 81
Magyar 33 85
Italiano 37 89
Nederlands 41 Portugues do Brasil 93
Norsk 45 لع َر ِبية
َ 97
Język polski 49 ִ
ברית 101
Charging
• Fully dry off the USB port before charging.
• To prevent damage, use the provided USB-C cable.
LED indicator
Steady red Being charged
Steady blue Fully charged
Flashing red Low battery
Powering On/Off
Press and hold the multi-function button for 1 second to power on.
Press and hold the multi-function button for 3 seconds to power off.
ON
OFF
ON
OFF
LED indicator
Steady white for 1 second Powered on
Steady red for 1 second Powered off
01 EN
Bluetooth Pairing
When powered on, find “Soundcore Life U2” in the Bluetooth list on your device and
connect.
When powered off, press and hold the multi-function button for 3 seconds until the
LED flashes blue to enter the Bluetooth pairing mode.
ON
≤ 1m
Soundcore
Life U2
LED indicator
Flashing blue Bluetooth pairing
Steady blue Bluetooth connected
Multi-point Pairing Mode
When successfully connected with the first device, press and hold the volume up
button and volume down button simultaneously for 3 seconds to pair with another
device.
1/2
Soundcore
Life U2
2/2
Soundcore
3”
Life U2
EN 02
• Soundcore Life U2 can only play music on one mobile device at a time.
• Each time you power your Soundcore Life U2, it will automatically connect
to your last successfully connected device if available.
Button Controls
Play / Pause Press
Next track Press and hold for 1 second
Previous track Press and hold for 1 second
Volume up / down / Press
Press and hold for 1 second
BassUp™ (Dual Equalizer)
simultaneously
Answer / End a call
Press
Put the current call on hold and answer a new
incoming call
Reject a call
Press and hold for 1
second
Switch between held call and active call
Activate Siri or other voice assistant software Press twice
03 EN
Wearing
Choose the EarTips and EarWings that fit your ears best.
Reset
1. Make sure the headphone is powered off and being charged.
2. Press and hold the multi-function button and volume up button simultaneously for
5 seconds until the LED indicator flashes red twice.
All the memory data will be cleared.
Specifications
Specifications are subject to change without notice.
Input 5V 0.5 A
Charging time 2 hours
Playtime (varies by volume level and content) 24 hours
Driver size 10 mm × 2
Frequency response 20 Hz - 20 kHz
Impedance 16 Ω
Waterproof level IPX7
Bluetooth version V5.0
Bluetooth range 10 m / 33 ft
EN 04
