R K C O M PA C T

C O M PA C T R A C K C O N V E Y O R
DISHWASHERS
WITH SIMPLE RINSE
RK COMPACT
COMPACT RACK CONVEYOR DISHWASHERS
WITH SIMPLE RINSE

The RK compact dishwashers line has been desi- dimensions with high performances. We now
gned to satisfy the demand of medium and small introduce the new line with electromechanical
restaurants. These machines combine compact panel to enhance the usability.

1 - RK COMPACT
 RACK CONVEYOR
DISHWASHERS
CUSTOMIZABLE 1080 mm 1380 mm 1680 mm 1980 mm

AND REVERSIBLE

FEATURES
• Sloped radial wash tanks to help emptying the tanks
• Self-cleaning vertical wash pumps, protected from electrical
overloads
• Traction system with built-in clutch preventing derailment
• AISI 304 stainless steel boilers, fully insulated to reduce thermal
losses
• Simple and intuitive touch control panel or electromechanical
panel
• S/S wash and rinse arms. These are removable without using any
tool
• S/S surface filters on every tank, easily removable without
detaching wash arms
• Insulated double skin door, counterbalanced, equipped with
anti-drop safety system
• DRIVE speed variator with 3 speeds on the electromechanical
versions and 5 speeds on the electronic versions
• Autotimer in order to switch off the rack conveyor motor as well
as other machine’s options (electronic version)
• Economizers to allow operation only when the rack is detected
on that specific area
• Pressure reducer, to stabilize the water pressure and grant an
optimal final rinse
• Non-return valve to prevent the water backflow
• Linear or 90° arc drying module (Option)
• Sanitization system which includes the sanitizing product
dispensers (Option for electronic version only)
• Heat recovery in case of cold water inlet (8-15 °C) (Option)

RK COMPACT - 2
RK COMPACT
COMPACT RACK CONVEYOR DISHWASHERS
WITH SIMPLE RINSE

Model Voltage Capacity Poids Code

RK 1010 3 SPEEDS

RACK Ø 450 1080 x 715

EQUIPMENT 1690/1900 H
1 X C40 210 kg
400 V 3N ~ 50 Hz
1 X C43 RK 1010
19,1 kW 500x500
1 X C44 GN 1/1
1 X C47
66* - 100 530x325x25 H
racks/h

RK 1640 3 SPEEDS

RACK 1880 x 715

EQUIPMENT Ø 450 1690/1900 H
P 1 X C40 270 kg
W 400 V 3N ~ 50 Hz
R 1 X C43 RK 1640
23,6 kW
1 X C44 GN 1/1
1 X C47 500x500
530x325x25 H
86* - 150
racks/h

P Prewash

W Wash

R Single rinse

* In compliance with DIN SPEC 10534 regulation (contact time)

3 - RK COMPACT
 RACK CONVEYOR
DISHWASHERS
Model Voltage Capacity Poids Code
RK 1010 E ELECTRONIC 5 SPEEDS

RACK 1080 x 715

EQUIPMENT Ø 450 1565/1900 H
W
R 1 X C40 210 kg
400 V 3N ~ 50 Hz
1 X C43 RK 1010 E
19,1 kW
1 X C44 GN 1/1
LE 500x500
ERSIB 1 X C47
REV
530x325x25 H
66* - 100
racks/h

RK 1640 E ELECTRONIC 5 SPEEDS

RACK 1880 x 715

EQUIPMENT Ø 450 1565/1900 H
P
W 1 X C40 270 kg
R 400 V 3N ~ 50 Hz
1 X C43 RK 1640 E
23,6 kW
1 X C44 GN 1/1
1 X C47 500x500
530x325x25 H
86* - 150
racks/h

RK COMPACT - 4
RK COMPACT
COMPACT RACK CONVEYOR DISHWASHERS
WITH SIMPLE RINSE

OPTIONS
XP PRE DOS DDE-GROUP DOS/S DRIVE AUTOTIMER

Kromo
220-240 V 380-415 V Extra Dispensers Dispenser Rinse Pressure High Smart Soft Touch
Model 60 Hz disp. Autotimer
3 50 Hz 3N 50 Hz Power kit with probe econom. reducer speed drive panel
connections

RK 1010 € +3% € € € ---- ---- ---- ----

RK 1640 € +3% € € € ---- ---- ---- ----

RK 1010 E € +3% € € € €

RK 1640 E € +3% € € € ----

Standard

---- Not available

E Electronic panel

KDRA924 Available only without KM22 - KM23 on entry

KM22 - KM23 Available on entry or exit connections, one per layout

DDE-GROUP Both detergent (with probe) and rinse-aid dispensers included

DOS/S For detergent dispenser only

HIGH SPEED Extra power included. Hot water inlet 55°C

AUTOTIMER Functioning only when combined with KDR24, KDRA924, KSC5, KHR5

Water supply 55 °C - We recommend to install the machine in a well ventilated room, with a properly sized steam exhausting system
Construction according to UL-NSF standards upon request
Costruzione secondo norme UL-NSF su richiesta

EAC label upon request

Option compatibility to be confirmed by the manufacturer after verification

AVAILABLE ARCS:

K21 KM22 KM23

1300x1300x860 H 850x850x885 H 850x1500x885 H
90° roller arc with tank 90° mechanized arc 180° mechanized arc
(clockwise/counter-clockwise) (clockwise/counter-clockwise)

5 - RK COMPACT
 RACK CONVEYOR
DISHWASHERS
BT DVGW DWI/T DWI PI PAP SAN PAP-SAN DIV KSC5 KHR5 KDR24 KDRA924 K16AC

Booster
Break Tank Thermoacoustic S/S Booster Sanitization Price for Steam Heat Dryer Splash
Model DVGW Pump Dryer
Tank insulation insulation pumps pump System division cond. recovery 90° arc guard
Sanitization

RK 1010 ---- ---- € € € € ---- ---- € € € € € €

RK 1640 ---- ---- € € € € ---- ---- € € € € €

RK 1010 E € € € € € € € € € € € € € €

RK 1640 E € € € € € € € € € € € € €

BT Booster pump included

DVGW Not available with heat recovery and steam condensera

Components prescribed by DVGW on request (check option compatibility with the manufacturer)

DWI - DWI/T Recommended with KHR5

PI Available with 50 Hz frequency only

SAN Including dosing system for sanitizing product

KHR5 With osmotic water supply and electrical conductivity lower than 200 microsiemens, it is mandatory to install a stainless
steel heat exchanger
XP In case of cold water supply for rinse (8-55 °C) and without any heat recovery, the extra power option is mandatory. In case
of cold water supply for rinse (8-15 °C), we recommend the heat recovery option

850 850
600 300

150

1830
1830 1720

500

KDR24 KDRA924 KSC5 K16AC

4,5 kW 4,5 kW Steam condenser Splash guard
90° roller arc Dryer with mechanized arc 90° KHR5
to be used with original Kromo Compact heat recovery
racks only

RK COMPACT - 6
RK COMPACT ACCESSORIES

Description Capacity Dimensions Code

PLATE BASKET 18 Plates 500x500x105 H C 40

GLASS BASKET WITH

GLASS SUPPORT AND 500x500x235 H C 135
ANTI-TIPPING LID

LARGE MESH BASKET For glasses 500x500x105 H C 44

HOLDER FOR GLASS For glass support

500x500x50 H C111
SUPPORT (C112-C113-C114)

5x5 Glass
GLASS SUPPORT 500x500x50 H C 112
Ø 87 mm (C111)

4x4 Glass
GLASS SUPPORT Ø 110 mm 500x500x50 H C 113
(C111)

6x6 Glass
GLASS SUPPORT Ø 72 mm 500x500x50 H C 114
(C111)

6 pcs
TRAYS BASKET 500x500x105 H C 43
max depth 25mm

CUTLERY BASKET 490x180x140 H C 47

FLEXIBLE SHOWER complete with mixing

1000 H K1
group and lever tap, to be fixed to the wall

FLEXIBLE SHOWER complete with mixing

group and lever tap, to be fixed to the wall and 1000 H K 1HR
intermediate tap

7 - RK COMPACT
 RACK CONVEYOR
DISHWASHERS
Description Capacity Dimensions Code
1515x620x660 H K 7M16*
SHELF
2315x620x660 H K 7M24*

Waste hole and special 1600x1000x850 H K 7A/1600*

GRADING TABLE
dimensions upon
WITH RUBBER RING
request 2400x1000x850 H K 7A/2400*

1800x1240
MECHANIZED 1 waste hole K M7/1800*
1525 H
GRADING TABLE
With mechanized basket
advancement system 2400x1240
2 waste holes K M7/2400*
1525 H

1200x590x860 H K 4B

1200x730x860 H K 55
Standard
rubber ring 1500x730x860 H K 8

Sink Sink Standard

rubber ring 1800x730x860 H K 9
500x400x270 H 500x400x270 H

ROLLER TABLE + sink,

right or
left version
1600x730x860 H K 195
Sink
500x400x270 H

1100x650x860 H K 19*

1600x650x860 H K 19/B*
LINEAR ROLLER
TABLE WITH TANK
2100x650x860 H K 19/C*

Option
K 18
end microswitch
Not compatible with 1100x650x860 H K 19/1
same references
LINEAR ROLLER Not on 180° arcs 1600x650x860 H K 19/1A
TABLE WITH TANK
complete with 1150x650x860 H K 20/1
To be connected to
end microswitch
LC77/3 only and to
dryer on 180° 1650x650x860 H K 20/1A

90° roller arc with tank

1300x1300x860 H K 21*
(exit only with roller table)

ANGLE LOADING TABLE

Optional connection
complete with basket pull- 700x610x820 H K 25
to prewash tables
through system
90° mechanized arc
clockwise/counter- Available on entry or 850x850x885 H KM22*
clockwise, not available at exit connections, one
the entry + LC version per layout.
180° mechanized arc To be used with original
(clockwise/counter- DIHR racks only 850x1500x885 H KM23*
clockwise)
* Wooden cage +2% minimum + € / Special dimensions for tables upon request / Tables shown in right-to-left version
We strongly recommend the presence of a roller table with end microswitch at the exit of our rack conveyor machines for a correct operation

RK COMPACT - 8
 KROMO ALI GROUP SRL
Via Mestre, 3
3 1 0 3 3 C a s t e l f r a n c o Ve n e t o ( T V )
T: + 3 9 0 4 2 3 7 3 4 5 8 0
F: +39 0423 734581
kromo@kromo-ali.com

SERVICE:
T. + 3 9 0 4 2 3 7 3 4 5 9 3
F: +39 0423 734592
E: service@kromo-ali.com

w w w. k r o m o - a l i . c o m

Edition 05.2023

an Ali Group Company

The Spirit of Excellence