SMD Aluminum Electrolytic Capacitors CVJ

CVJ Series
Features
4 ~ 18 , 105 , 2,000 hours assured
Designed for surface mounting on high density PC board
RoHS Compliance

Marking color: Black

Specifications
Items Performance
6.3 ~ 100V 160 ~ 400V 450V
Category Temperature Range
-55 ~ +105 -40 ~ +105 -25 ~ +105
Capacitance Tolerance ±20% (at 120Hz, 20 )

Rated voltage 6.3 ~ 100V 160 ~ 450V

Time after 2 minutes after 5 minutes
Leakage Current (at 20 ) Case size 4 ~ 10 12.5 ~ 18 12.5 ~ 18
Leakage Current
whichever is greater whichever is greater
Where, V = rated DC working voltage in V

Rated Voltage 6.3 10 16 25 35 50 63 100 160 ~ 250 400 ~ 450

Tan (at 120Hz, 20 ) 4 ~ 10 0.45 0.35 0.28 0.18 0.16 0.14 0.12 0.12 - -
12.5 ~ 18 0.40 0.38 0.34 0.26 0.22 0.18 0.14 0.10 0.20 0.25

Impedance ratio shall not exceed the values given in the table below.
Rated Voltage 6.3 10 16 25 35 50 63 100 160 ~ 250 400 ~ 450
Z(-25 ) D 12.5 4 4 3 2 2 2 2 3 - -
Low Temperature
Impedance /Z(+20 ) D 12.5 5 4 3 2 2 2 2 2 3 6
Characteristics (at 120Hz)
Ratio Z(-55/-40 ) D 12.5 12 8 6 4 3 3 3 4 - -
/Z(+20 ) D 12.5 10 8 6 4 3 3 3 3 6 10

Test Time 2,000 Hrs

Within ±25% of initial value for D 6.3mm;
Capacitance Change
Within ±20% of initial value for D 8mm
Endurance Less than 300% of specified value for D 6.3mm;
Less than 200% of specified value for D 8mm
Leakage Current Within specified value
* The above specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage applied for 2,000
hours at 105 .
Test time: 1,000 hours; other items are the same as those for the Endurance.
Shelf Life Test
The rated voltage shall be applied to the capacitors before the measurements for 160 ~ 450V (Refer to JIS C 5101-4 4.1).

Freq. (Hz)
50 120 1k 10k up
Ripple Current and
Frequency Multipliers Under 1,000 0.80 1.00 1.25 1.40
1,000 C 8,200 0.85 1.00 1.15 1.25

Diagram of Dimensions
Fig. 1 Vent 8 ×10L
Lead Spacing and Diameter Unit: mm
D±0.5 B±0.2 D L A B C W P ± 0.2 Fig. No.
4 5.7 ± 0.3 4.3 4.3 5.1 0.5 ~ 0.8 1.0 1
0.4 max 5 5.7 ± 0.3 5.3 5.3 5.9 0.5 ~ 0.8 1.5 1
6.3 5.7 ± 0.3 6.6 6.6 7.2 0.5 ~ 0.8 2.0 1
6.3 7.7 ± 0.3 6.6 6.6 7.2 0.5 ~ 0.8 2.0 1
8 6.5 ± 0.3 8.4 8.4 9.0 0.5 ~ 0.8 2.3 1
8 10 ± 0.5 8.4 8.4 9.0 0.7 ~ 1.1 3.1 1
P
C±0.2 10 7.7 ± 0.3 10.4 10.4 11.0 0.7 ~ 1.3 4.7 1
10 10 ± 0.5 10.4 10.4 11.0 0.7 ~ 1.3 4.7 1
Vent
Fig. 2 D±0.5 B±0.2 12.5 13.5 ± 0.5 13.0 13.0 13.7 1.1 ~ 1.4 4.4 2
12.5 16 ± 0.5 13.0 13.0 13.7 1.1 ~ 1.4 4.4 2
16 16.5 ± 0.5 17.0 17.0 18.0 1.1 ~ 1.4 6.4 2
1.0 Max
16 21.5 ± 0.5 17.0 17.0 18.0 1.1 ~ 1.4 6.4 2
18 16.5 ± 0.5 19.0 19.0 20.0 1.1 ~ 1.4 6.4 2
18 21.5 ± 0.5 19.0 19.0 20.0 1.1 ~ 1.4 6.4 2

P
C±0.2
 SMD Aluminum Electrolytic Capacitors CVJ

Marking
D 6.3 mm D = 8 ~ 10 mm D 12.5 mm

Negative Date code

A2 Date code Negative A2 Date
code
polarity
A2 Negative polarity
VEJ Series

10
Rated cap. polarity VEJ Series name name

470 Rated cap.

2200 Rated
cap.
16J Rated voltage
& Series code
6.3V
Rated voltage
6.3V Rated
voltage

Dimension: D × L(mm)
Dimension and Permissible Ripple Current Ripple Current: mA/rms at 120 Hz, 105
V. DC 6.3V (0J) 10V (1A) 16V (1C) 25V (1E) 35V (1V) 50V (1H) 63V (1J) 100V (2A)
Contents D×L mA D×L mA D×L mA D×L mA D×L mA D×L mA D×L mA D×L mA
1 010 4×5.7 8 4×5.7 8
2.2 2R2 4×5.7 12 4×5.7 12
3.3 3R3 4×5.7 14 5×5.7 17
4.7 4R7 4×5.7 17 4×5.7 17 5×5.7 20 6.3×5.7 22
6.3×5.7 32
10 100 4×5.7 20 4×5.7 20 5×5.7 27 6.3×5.7 32 8×6.5 51
8×6.5 51
6.3×5.7 38
22 220 4×5.7 22 4×5.7 22 5×5.7 30 5×5.7 30 6.3×5.7 44 6.3×7.7 58 8×10 100
8×6.5 67
6.3×5.7 46
33 330 5×5.7 34 5×5.7 34 5×5.7 34 6.3×5.7 46 6.3×7.7 65 8×10 140 10×10 150
8×6.5 76
6.3×5.7 48
47 470 5×5.7 38 5×5.7 38 6.3×5.7 48 6.3×7.7 80 6.3×7.7 70 8×10 170 12.5×13.5 250
8×6.5 79
6.3×5.7 69
100 101 6.3×5.7 69 6.3×5.7 69 6.3×7.7 100 8×10 240 8×10 210 10×10 310 12.5×13.5 380
8×6.5 90
6.3×7.7 120 8×10 270
220 221 6.3×7.7 120 6.3×7.7 120 8×10 270 10×10 330 12.5×13.5 470 16×16.5 450
8×6.5 120 10×7.7 270
8×10 290 18×16.5 590
330 331 8×10 290 8×10 290 8×10 290 10×10 370 12.5×13.5 490 16×16.5 650
10×7.7 290 16×21.5 750
8×10 320
470 471 8×10 320 10×10 380 10×10 380 12.5×13.5 520 12.5×16 550 16×16.5 700 18×21.5 980
10×7.7 320
1,000 102 10×10 410 10×10 410 12.5×13.5 550 12.5×16 550 16×16.5 800 18×16.5 990
2,200 222 12.5×13.5 680 12.5×13.5 680 16×16.5 900 16×16.5 900 18×16.5 1,050
18×16.5 1,150
3,300 332 12.5×16 850 16×16.5 950 16×16.5 950
16×21.5 1,200
18×16.5 1,225
4,700 472 16×16.5 1,000 16×16.5 1,000 18×21.5 1,300
16×21.5 1,275
18×16.5 1,290 18×16.5 1,290
6,800 682
16×21.5 1,350 16×21.5 1,350
8,200 822 18×21.5 1,450 18×21.5 1,450

V. DC 160V (2C) 200V (2D) 250V (2E) 400V (2G) 450V (2W)
Contents D×L mA D×L mA D×L mA D×L mA D×L mA
4.7 4R7 12.5×13.5 65 12.5×13.5 45 12.5×13.5 45
10 100 12.5×13.5 80 12.5×13.5 70 12.5×13.5 50 12.5×16 75
22 220 12.5×16 110 12.5×13.5 105 16×16.5 85 16×16.5 85
33 330 12.5×13.5 95 12.5×16 120 16×16.5 180 18×16.5 100 18×16.5 100
47 470 12.5×16.5 205 16×16.5 220 16×16.5 220 18×21.5 130
100 101 16×16.5 250 18×16.5 280 18×21.5 290
 Aluminum Electrolytic Capacitors
Part Numbering System for the SMD Type
When you place an order for Calchip electrolytic capacitors, please refer to our part number as shown below.

CVJ series 16V 10 μF ±20% 4φ×5.3L Carrier tape

CVJ － 1C 100 M D55 － R

□□ □□ □□□ □ □□□ □
1 2 3 4 5 6
Capacitance Symbol of case
Series name Rated voltage Capacitance Package type
tolerance size

1 Series:
Series is represented by a two or three digit code. If there are 2 digits only for series code, keep blank on the third digit.

→ →
2 Rated Voltage:
Voltage on volts (V) is represented by two digit code showing the real working voltage.
OG=4V, OJ=6.3V, 1A=10V, 1C=16V, 1E=25V, 1V=35V, 1H=50V, 1J = 63V, 1K = 80V and 2A = 100V

3 Capacitance:
Rated capacitance in μF is represented by a three digit number. The first two digits are the significant figures of the
nominal capacitance and the third digit indicates the number of zeros following these figures. The decimal point is
represent by the capital letter R. Please refer to the following example:

μF 0.1 0.47
0.4 4.7
4.7 47 100 470 1000
Part number 0R1 R47 010 4R7 100 470 101 471 102

4 Tolerance:
Symbol of W, T, Q, V, M, K and J show special capacitance tolerance which are listed as follows:
W = -10% ~ +100% M = -20% ~ +20%
T = -10% ~ +50% K = -10% ~ +10%
Q = -10% ~ +30% J = -5% ~ +5%
V = -10% ~ +20%

5 Case Size: Symbol of case size are listed as follows:

φD×L (mm) Symbol φD×L (mm) Symbol φD×L (mm) Symbol φD×L (mm) Symbol
3×5.3 B55 6.3×5.3 F55 8×6.5 G68 10×10.0 H10
4×5.3 D55 6.3×5.7 F60 8×7.0 G72 10×13.0 H13
4×5.7 D60 6.3×6.0 F62 8×10.0 G10 12.5×13.5 K14
5×5.3 E55 6.3×7.0 F72 8×12.0 G12 12.5×16.0 K16
5×5.7 E60 6.3×7.7 F80 10×8.0 H82 16×16.5 L17

6 Package type:
R Taping polarity symbol with reel package in 380 mm
M Taping polarity symbol with reel package in 450 mm
T Tray