0% found this document useful (0 votes)
14 views1 page

Modification of The Maintenance Kits (4008, 5008S) : Service Information D 1769 (EN) 2011-03-15

Fresenius Medical Care has modified the maintenance kits for all 4008 and 5008S hemodialysis devices, including changes to O-rings and hydrophobic filters. The new maintenance kits are fully compatible and available immediately. This document is confidential and intended for official use only.

Uploaded by

minatkos1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
14 views1 page

Modification of The Maintenance Kits (4008, 5008S) : Service Information D 1769 (EN) 2011-03-15

Fresenius Medical Care has modified the maintenance kits for all 4008 and 5008S hemodialysis devices, including changes to O-rings and hydrophobic filters. The new maintenance kits are fully compatible and available immediately. This document is confidential and intended for official use only.

Uploaded by

minatkos1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Service Information D 1769 (EN) 2011-03-15

Fresenius Medical Care

Hemodialysis devices

Modification of the maintenance kits (4008, 5008S)


Summary:
Devices affected all 4008 and 5008S hemodialysis devices
Measure The maintenance kits of the 4008 and 5008S were adapted
and modified.
Changes to the 4008 maintenance kits:
As far as the 4008 maintenance kits are concerned, the O-
rings for the
bibag connector type 5008 were added an the O-rings of the
dialyzer couplings were changed to coated O-rings.
The cover sheets of the maintenance kits contain the
identification "beschichtet/coated" for the respective O-rings.
Changes to the 5008S maintenance kit:
The hydrophobic filter in the 5008S maintenance kit was
adapted to the 5008 maintenance kit.
The hydrophobic filter is always enclosed together with the
tubing.
Priority Not affected
Compatibility Fully compatible
Logistics Maintenance kit for 4008 with options, part no. M33 933 1
Maintenance kit for 4008 without options, part no. M38 211 1
5008S maintenance kit, part no. M42 100 1
Documentation Supplement to existing technical documentation
Introduction in series The new maintenance kits are available with immediate effect.
production
Relevant for operation Not affected

Enclosures:
None

CONFIDENTIAL!
This document is strictly confidential and for official use by employees of the FRESENIUS group only ! Any copying and/or disclosing of this document and/or the use or communication of the
contents thereof outside the official use and/or the distribution and/or disclosure of the document to other third parties and/or third party’s disclosure and/or distribution thereof are strictly
forbidden, unless the prior written approval and confirmation of Fresenius Medical Care Deutschland GmbH have been given. Infringements and violations of this clause will be taken to court
according to all relevant matters, in particular will offenders be liable to compensate damages of the FRESENIUS group.
FRESENIUS group reserves all rights as to the document and its confidential information, in particular any rights of utilization, beneficial interests and patent rights.

Page 1 of 1

You might also like