PRESSINFORMATION
28. BAUMA
Munich
23.04.2007 - 29.04.2007
Meusburger
Fahrzeugbau GmbH
Kollmering 7
94535 Eging am See
Tel. 00 49 / 85 44 / 96 22 - 0
Fax: 00 49 / 85 44 / 96 22 - 50
Our pressinformation you can find on
www.meusburger.ch
to your personal usability
E-mail: info@meusburger.ch
Outdoor F8 / N819/3
3-Axle-Mega-Platform-trailer
teleskopable
Again a new development by the house Meusburger.
A frame neck with hight about 110 mm in combination with
hydraulic steering makes it possible to get a lowest loading hight
and optimal track-quality.
A stronger frame for pointloading and integrated Containertwistlocks as soon as
aluminium-rampes maximate the transporting segment.
Zink-spraying is preventing corrosion.
Total weight technical: 45.000 kg
Saddle load: 15.000 kg
Axle load: 30.000 kg
Own weight (basic): about 9.900 kg
Platform lengh: 13.580 mm
Platform width: 2.486 mm
Position: Outdoor F8 / N819/3
5-Axle-jumbo-kombi-trailer
The next covered semi-trailer in special building by Meusburger.
The roof is in the width to telekope and it is drivable to a total width of 3.500 mm
with a closed roof and closed curtain sides.
A mechanical pop top, which is to drive in higher positions (+ 400 mm) offers
space for goods up to a hight of 3.600 mm covered.
A stronger frame-construction for pointloading 40 to to 4 m and a stronger
outer frame give the stability for heavy goods.
With the 4th and 5th axle as a fiction-steered caster-axle the driving
quality is optimal.
Zink-spraying is preventing corrosion.
Total weight: 55.000 kg
Own weight: about 13.600 kg
Interior length at the front: 3.200 mm
Interior length at the back: 9.970 mm
Interior width: 2.485 mm
Interior hight at the front: 2.645 mm
Interior hight in the back: 3.200 mm
Position: Outdoor F8 / N819/3
2-Axle-lowbed-trailer
teleskopable with 3rd axle to put on
A trailer with a lot of extras, which whether volume or heavy goods
can be transported.
A teleskopable central-frame-construction make it possible to get a
loading area in the lowbed with al length of max. 9.000 mm with a closed roof.
Transportings to a width of 5 m with closed curtain-sides are no
problem for this trailer (rear portal on both sides to make wider).
A mechanical pop top, which is to drive in higher positions (+ 400 mm) offers
space for goods to a high of 4.050 mm.
With spreading top-rails on the gooseneck it is possible to load wide goods from the top.
Alternatively on the trailer can be putted on an additional axle, which is
connected with the steering.
Total weight: 38.000/48.000 kg
Own weight: about 13.500/15.500 kg
Interior length at the front 3.100 mm
Interior length in the lowbed: 6.000 mm
Interior lenght above the axles: 3.170/4.980 mm
Interior width: 2.480 mm
Interior hight at the front: 2.480 mm
Interior hight in the lowbed: 3.650 mm
Interior hight above the axles: 3.050 mm
Position: Outdoor F8 / N819/3
5-Axle-semi-trailer
teleskopable
A special trailer with was constructed and built in according to the
wishes of the customer.
With outer main-frames on the front platform it is possible to get
a longer loading area in the back platform.
A stronger frame construction, which is enduring a point-load 54 to to 5 m,
offers „big boys“ a „safe home“.
A teleskopable central-frame-construction make it possible to get a
loading area in the back platform with al length of max. 13.350 mm
in combination with a hollow above the axles, 380 mm deep, for the spoon
of an excavator, which is possible with special droped axles.
Pull-out spreadings to a total width of 3.200 mm and drive-on rampes at the
back in two-part-construction are raising the flexibility with regard to
the transport possibilities.
Hydraulic suspension an hydraulic steering are making the trailer
fit for transporting heavy goods.
Total weight technical: 74.000 kg
Own weight: about 18.000 kg
Length front platform: 3.225 mm
Length back platform: 9.150 mm
Loading hight: 920 mm
Position: Outdoor F8 / N819/3
3-axle-semi-trailer
This trailer was specially constructed for transporting working platforms.
Hydraucly operated rampes at the beck with a total length of
4.700 mm (2.850 + 1.850 mm) and an hydraulicly liftable ramp
at the frame neck makes it possible to get a low angle when
loading working platforms.
With an electrical winch with tractive 5.400 kg loading is no problem.
Because of hydraulic steering on the 2nd and 3rd axle moreover
the trailer is extrem maneuvrable.
Zink-spraying is preventing corrosion.
Total weight technical: 41.500 kg
Own weight: about 11.800 kg
Length front platform: 3.600 mm
Length back platform: 9.000 mm
Length slope at the back: 1.000 mm
Loading hight: 920 mm
Position: Outdoor F8 / N819/3
3-Axle-Steel-Halfpipe-Tipper
Optimized weight in combination with high stability makes it possible
to transport „big hulkes“.
This halfpipe is made in highquality with Hardox-Steel.
Aluminium-rimes also reduce the weight of this tipper.
Two lifting axles reduce the wearing when driving empty.
Zink-spraying is preventing corrosion.
Total weight: 38.000 kg
Own weight: 6.800 kg
Interior length: 7.500 mm
Iterior hight: 1.400 mm
Volume: 22 m3
Position: Outdoor F8 / N819/3
