PGCIL Exam 11th April 2025

Participant ID 02022100500017
Participant Name AKASH PATHAK
Test Center Name eTalent
Test Date 11/04/2025
Test Time 9:00 AM - 11:00 AM
Subject Diploma Trainee (Electrical)

Section : Electrical Engineering

Q.1 What is the main reason for using aluminium over copper in overhead conductors?
Ans 1. Aluminium is more durable and resistant to weathering.

2. Aluminium is lighter and more cost-effective than copper.

3. Aluminium is more electrically conductive than copper.

4. Aluminium has a higher melting point than copper.

Question ID : 44100963232
Option 1 ID : 441009251957
Option 2 ID : 441009251956
Option 3 ID : 441009251955
Option 4 ID : 441009251958
Status : Answered
Chosen Option : 2

Q.2 High-voltage transmission lines are used to ______.

Ans 1. power industrial machines

2. provide backup power

3. minimise energy loss during long-distance power transmission

4. distribute power to homes and small businesses

Question ID : 44100969077
Option 1 ID : 441009274939
Option 2 ID : 441009274940
Option 3 ID : 441009274938
Option 4 ID : 441009274937
Status : Answered
Chosen Option : 3

Q.3

Ans 1.

2.

3.

4.

Question ID : 441009120286
Option 1 ID : 441009478186
Option 2 ID : 441009478188
Option 3 ID : 441009478189
Option 4 ID : 441009478187
Status : Not Answered
Chosen Option : --
Q.4 The total electric power in a three-phase circuit is:
Ans 1. 3* line voltage * Line current * cosϕ

2. 3* rms voltage * rms current * cosϕ

3. 1.732 * phase voltage * phase current * cosϕ

4. 1.732 * line voltage * Line current * cosϕ

Question ID : 44100973854
Option 1 ID : 441009293627
Option 2 ID : 441009293629
Option 3 ID : 441009293628
Option 4 ID : 441009293626
Status : Answered
Chosen Option : 3

Q.5 Which of the following is a classification of measuring instruments based on the output
format?
Ans 1. Mechanical and Electrical

2. Analogue and Digital

3. Static and Digital

4. Static and Dynamic

Question ID : 44100949007
Option 1 ID : 441009195326
Option 2 ID : 441009195324
Option 3 ID : 441009195327
Option 4 ID : 441009195325
Status : Answered
Chosen Option : 2

Q.6 Which of the following is a key feature of a PID controller used in control systems?
Ans 1. It is used only in mechanical systems.

2. It combines proportional, integral and derivative control actions.

3. It operates only in the open-loop mode.

4. It only uses proportional control.

Question ID : 441009105901
Option 1 ID : 441009421667
Option 2 ID : 441009421666
Option 3 ID : 441009421668
Option 4 ID : 441009421665
Status : Answered
Chosen Option : 2

Q.7 Which of the following is a characteristic of linear time-invariant (LTI) systems?

Ans 1. The system's response is independent of the input.

2. The system has a non-linear relationship between input and output.

3. The system's parameters do not change over time.

4. The system parameters change over time.

Question ID : 441009105913
Option 1 ID : 441009421706
Option 2 ID : 441009421708
Option 3 ID : 441009421707
Option 4 ID : 441009421705
Status : Answered
Chosen Option : 3
Q.8 In a three-phase induction motor, the torque generated in the rotor is a result of:
Ans 1. the difference in the magnetic field strength between the stator and the rotor

2. the stator voltage causing direct induction in the rotor without any field interaction

3. the interaction between the rotor's flux and the stator’s current

4. the interaction between the stator’s magnetic field and the rotor’s magnetic field
produced by the induced current

Question ID : 44100978530
Option 1 ID : 441009312138
Option 2 ID : 441009312137
Option 3 ID : 441009312136
Option 4 ID : 441009312135
Status : Answered
Chosen Option : 4

Q.9 What is the main purpose of full-load unity power factor adjustment in an energy meter?
Ans 1. To ensure accurate readings at rated current and voltage

2. To compensate for temperature variations

3. To reduce the creeping effect

4. To minimise frequency errors

Question ID : 441009112258
Option 1 ID : 441009446610
Option 2 ID : 441009446609
Option 3 ID : 441009446611
Option 4 ID : 441009446612
Status : Answered
Chosen Option : 1

Q.10 In a three-phase induction motor, the ratio of full load torque to maximum torque is typically:
Ans 1. less than 1 and increases with load

2. greater than 1 and decreases with load

3. approximately equal to 1 for most operating conditions

4. equal to the slip at full load

Question ID : 44100978554
Option 1 ID : 441009312232
Option 2 ID : 441009312234
Option 3 ID : 441009312233
Option 4 ID : 441009312231
Status : Answered
Chosen Option : 4

Q.11 Which costing method is best suited for large-scale electrical installation projects?
Ans 1. Detailed item-wise costing

2. Guesswork estimation

3. Lump-sum estimation

4. Rough estimation based on experience

Question ID : 44100971167
Option 1 ID : 441009283053
Option 2 ID : 441009283051
Option 3 ID : 441009283052
Option 4 ID : 441009283054
Status : Answered
Chosen Option : 1
Q.12 What is a national grid?
Ans 1. A network of power generators used only in urban areas

2. A single power station supplying an entire country

3. A system of interconnected power stations and transmission lines

4. A backup power source for industrial use

Question ID : 441009121441
Option 1 ID : 441009482757
Option 2 ID : 441009482755
Option 3 ID : 441009482754
Option 4 ID : 441009482756
Status : Answered
Chosen Option : 3

Q.13 What is the main advantage of using a three-phase power source in electric drives over a
single-phase source?
Ans 1. Eliminates the need for a controller

2. Provides smooth and efficient power delivery

3. Reduces motor weight

4. Requires less wiring

Question ID : 44100969382
Option 1 ID : 441009276159
Option 2 ID : 441009276158
Option 3 ID : 441009276157
Option 4 ID : 441009276156
Status : Answered
Chosen Option : 2

Q.14 The brake test of a DC motor is primarily conducted to measure which of the following?
Ans 1. Efficiency of the motor

2. Armature resistance

3. Back EMF of the motor

4. Output power

Question ID : 44100949093
Option 1 ID : 441009195669
Option 2 ID : 441009195668
Option 3 ID : 441009195671
Option 4 ID : 441009195670
Status : Answered
Chosen Option : 1

Q.15 Why does a Francis turbine require a spiral casing?

Ans 1. To remove air pockets and avoid cavitation

2. To increase water pressure before entering the runner

3. To evenly distribute water flow to guide vanes

4. To store excess water for sudden load changes

Question ID : 441009122724
Option 1 ID : 441009487808
Option 2 ID : 441009487806
Option 3 ID : 441009487805
Option 4 ID : 441009487807
Status : Answered
Chosen Option : 2
Q.16 In a common-source FET amplifier, the input signal is applied to the:
Ans 1. Gate

2. Source

3. Drain

4. Body

Question ID : 44100993545
Option 1 ID : 441009372111
Option 2 ID : 441009372110
Option 3 ID : 441009372109
Option 4 ID : 441009372112
Not Attempted and
Status :
Marked For Review
Chosen Option : --

Q.17 In a Delta-Star (Δ-Y) transformation, if the resistance of each side of the Delta network is R,
the resistance of each arm in the equivalent Star network is _______.
Ans
1.

2.

3.

4.

Question ID : 44100978668
Option 1 ID : 441009312688
Option 2 ID : 441009312690
Option 3 ID : 441009312687
Option 4 ID : 441009312689
Status : Answered
Chosen Option : 1

Q.18 If a coil has 100 turns and carries a current of 3 amperes, then the MMF is ___________.
Ans 1. 300 AT

2. 100 AT

3. 3000 AT

4. 30 AT

Question ID : 44100962551
Option 1 ID : 441009249264
Option 2 ID : 441009249265
Option 3 ID : 441009249267
Option 4 ID : 441009249266
Status : Answered
Chosen Option : 1

Q.19 Which of the following statements is INCORRECT regarding hard magnets?

Ans 1. Hard magnets have high coercivity and retain magnetism for long periods.

2. Hard magnets are made from materials such as cobalt and rare-earth metals.

3. Hard magnets are typically used to make permanent magnets.

4. Hard magnets are easily magnetised and demagnetised.

Question ID : 44100962383
Option 1 ID : 441009248600
Option 2 ID : 441009248603
Option 3 ID : 441009248601
Option 4 ID : 441009248602
Status : Answered
Chosen Option : 4
Q.20 Which type of feedback is typically used in closed-loop control systems to maintain stability?
Ans 1. Both positive and negative feedback

2. No feedback

3. Negative feedback

4. Positive feedback

Question ID : 441009105911
Option 1 ID : 441009421699
Option 2 ID : 441009421700
Option 3 ID : 441009421698
Option 4 ID : 441009421697
Status : Answered
Chosen Option : 3

Q.21 An alternating current of 2 A flows in a circuit. The power consumed is 400 W. The value of
circuit resistance is:
Ans 1. 200 ohm

2. 300 ohm

3. 400 ohm

4. 100 ohm

Question ID : 44100973691
Option 1 ID : 441009293079
Option 2 ID : 441009293080
Option 3 ID : 441009293081
Option 4 ID : 441009293078
Status : Answered
Chosen Option : 4

Q.22 Which of the following is a shunt-connected FACTS controller?

Ans 1. Unified Power Flow Controller (UPFC)

2. Thyristor-Controlled Series Capacitor (TCSC)

3. Static Var Compensator (SVC)

4. Static Synchronous Series Compensator (SSSC)

Question ID : 44100963315
Option 1 ID : 441009252281
Option 2 ID : 441009252280
Option 3 ID : 441009252279
Option 4 ID : 441009252282
Status : Not Answered
Chosen Option : --

Q.23 Which of the following is NOT an essential component of an order format in electrical
estimation?
Ans 1. List of required materials with specifications

2. Worker attendance records

3. Terms of payment and delivery schedule

4. Supplier details and order number

Question ID : 44100971193
Option 1 ID : 441009283156
Option 2 ID : 441009283158
Option 3 ID : 441009283157
Option 4 ID : 441009283155
Status : Answered
Chosen Option : 2
Q.24 If source impedance is complex, then the maximum power transfer occurs when the load
impedance is:
Ans 1. equal to the source resistance

2. equal to the source reactance

3. equal to complex conjugate of the source impedance

4. equal to the source impedance

Question ID : 44100973631
Option 1 ID : 441009292840
Option 2 ID : 441009292841
Option 3 ID : 441009292839
Option 4 ID : 441009292838
Status : Answered
Chosen Option : 3

Q.25 In a current source to voltage source transformation, if the current source has a value of 5 A
and is in parallel with a 2 Ω resistor, what is the equivalent voltage source value?
Ans 1. 10 V

2. 7 V

3. 5 V

4. 2 V

Question ID : 44100971553
Option 1 ID : 441009284579
Option 2 ID : 441009284580
Option 3 ID : 441009284578
Option 4 ID : 441009284577
Status : Answered
Chosen Option : 1

Q.26 Which of the following is NOT a major advantage of butt welding?

Ans 1. No requirement for additional filler material

2. Suitable for all types of metals including non-conductors

3. Strong and uniform joints

4. High production rate

Question ID : 44100969492
Option 1 ID : 441009276613
Option 2 ID : 441009276615
Option 3 ID : 441009276614
Option 4 ID : 441009276612
Status : Answered
Chosen Option : 2

Q.27 What is the primary benefit of using EHVAC systems over traditional low-voltage
transmission?
Ans 1. It requires less complex equipment.

2. It always provides power to the load at unity power factor.

3. It is cheaper to install and maintain.

4. It allows for longer transmission distances with minimal loss.

Question ID : 44100970288
Option 1 ID : 441009279767
Option 2 ID : 441009279768
Option 3 ID : 441009279766
Option 4 ID : 441009279765
Status : Answered
Chosen Option : 4
Q.28 Which of the following is correct about the rotor of Permanent Magnet Synchronous Motor
(PMSM)?
Ans 1. It has an AC winding connected to the stator supply.

2. It contains windings and requires an external supply for excitation.

3. It contains permanent magnets and does not require an external supply for excitation.

4. It is a simple steel core with no windings.

Question ID : 44100989400
Option 1 ID : 441009355745
Option 2 ID : 441009355743
Option 3 ID : 441009355744
Option 4 ID : 441009355746
Status : Answered
Chosen Option : 3

Q.29 What is the primary reason for using electric braking in elevator DC motors?
Ans 1. To increase the operating speed of the elevator

2. To improve energy efficiency and safety

3. To eliminate the need for counterweights

4. To reduce the number of mechanical components

Question ID : 44100969542
Option 1 ID : 441009276808
Option 2 ID : 441009276809
Option 3 ID : 441009276811
Option 4 ID : 441009276810
Status : Answered
Chosen Option : 2

Q.30 The average demand of a power plant is calculated as:

Ans 1. (Installed capacity) × (Utilisation factor)

2. (Total energy generated) / (Number of hours)

3. (Maximum demand) / (Load factor)

4. (Demand factor) × (Connected load)

Question ID : 441009119493
Option 1 ID : 441009475093
Option 2 ID : 441009475092
Option 3 ID : 441009475091
Option 4 ID : 441009475094
Status : Answered
Chosen Option : 2

Q.31 In a parallel R-L-C circuit, at resonance, the impedance of the circuit is ___________.
Ans 1. zero

2. equal to the resistance of the resistor

3. infinite

4. equal to the reactance of the inductor

Question ID : 44100979011
Option 1 ID : 441009313955
Option 2 ID : 441009313956
Option 3 ID : 441009313954
Option 4 ID : 441009313957
Status : Answered
Chosen Option : 1
Q.32 In an AC series motor, what happens when the load increases?
Ans 1. The speed of the motor decreases, and torque increases.

2. The speed of the motor increases, and torque decreases.

3. The speed of the motor remains constant, and torque decreases.

4. Both the speed and torque remain constant.

Question ID : 44100989483
Option 1 ID : 441009356075
Option 2 ID : 441009356076
Option 3 ID : 441009356078
Option 4 ID : 441009356077
Status : Answered
Chosen Option : 1

Q.33 Which of the following is NOT a limitation of Anderson’s Bridge?

Ans 1. It is difficult to obtain balance due to additional resistor connections.

2. It has a complex circuit requiring more components.

3. The balance condition is affected by the applied AC frequency.

4. It is difficult to use at high frequencies due to stray capacitance effects.

Question ID : 44100999215
Option 1 ID : 441009394850
Option 2 ID : 441009394849
Option 3 ID : 441009394851
Option 4 ID : 441009394852
Not Attempted and
Status :
Marked For Review
Chosen Option : --

Q.34 What would happen to the output of an open-loop system if the input changes due to a non-
linearity in the system?
Ans 1. The system's output changes unpredictably without correction from feedback.

2. The system output remains the same, as open-loop systems are unaffected by non-
linearity.
3. The system will provide a linear output despite the non-linearity

4. The system will stabilise itself over time, compensating for non-linearity.

Question ID : 441009105938
Option 1 ID : 441009421801
Option 2 ID : 441009421802
Option 3 ID : 441009421804
Option 4 ID : 441009421803
Status : Answered
Chosen Option : 2
Q.35 Which of the following statements about wattmeter errors is NOT true?
Ans 1. Shielding is used in wattmeters to reduce errors due to mutual inductance and stray
magnetic fields.
2. They are independent of the effect of power factor and temperature.

3. Errors in wattmeters can occur due to power factor variation.

4. Eddy current errors are reduced by using stranded conductors.

Question ID : 441009112211
Option 1 ID : 441009446389
Option 2 ID : 441009446392
Option 3 ID : 441009446390
Option 4 ID : 441009446391
Status : Answered
Chosen Option : 4

Q.36 Which of the following is the main function of a star-delta starter for a three-phase induction
motor?
Ans 1. To protect the motor from overload during operation

2. To reduce the torque during motor startup

3. To increase the speed of the motor during startup

4. To reduce the voltage applied to the motor during startup

Question ID : 44100977807
Option 1 ID : 441009309229
Option 2 ID : 441009309226
Option 3 ID : 441009309228
Option 4 ID : 441009309227
Status : Answered
Chosen Option : 3

Q.37 Which type of transmission towers are typically used for 400 kV transmission lines?
Ans 1. Concrete poles

2. Wooden poles

3. Steel lattice towers

4. Composite tower

Question ID : 44100963174
Option 1 ID : 441009251733
Option 2 ID : 441009251732
Option 3 ID : 441009251731
Option 4 ID : 441009251734
Status : Answered
Chosen Option : 3

Q.38 In a series AC circuit with a purely resistive load, the reactive power is ________________.
Ans 1. equal to the active power

2. zero

3. maximum

4. equal to the apparent power

Question ID : 44100983516
Option 1 ID : 441009331819
Option 2 ID : 441009331818
Option 3 ID : 441009331821
Option 4 ID : 441009331820
Status : Answered
Chosen Option : 2
Q.39 Read the given statements and select the most appropriate option.

Statements:
1: The charging current in a transmission line is a result of the line's capacitance.
2: The charging current is directly proportional to the line's capacitance and the applied
voltage.
Ans 1. Statement 1 is true, but Statement 2 is false.

2. Statement 1 is false, but Statement 2 is true.

3. Both Statement 1 and Statement 2 are false.

4. Both Statement 1 and Statement 2 are true.

Question ID : 44100971448
Option 1 ID : 441009284180
Option 2 ID : 441009284181
Option 3 ID : 441009284182
Option 4 ID : 441009284179
Status : Answered
Chosen Option : 4

Q.40 If the permeability μ of a material is increased, the reluctance of the composite magnetic
circuit ___________.
Ans 1. decreases

2. becomes zero

3. remains unchanged

4. increases

Question ID : 44100962386
Option 1 ID : 441009248613
Option 2 ID : 441009248615
Option 3 ID : 441009248614
Option 4 ID : 441009248612
Status : Answered
Chosen Option : 1

Q.41 The capacitance per unit length of a transmission line depends on ______________.
Ans 1. the type of insulators used in the transmission line

2. the conductor resistance

3. the distance between the conductors and the ground

4. the conductor material

Question ID : 44100962138
Option 1 ID : 441009247588
Option 2 ID : 441009247586
Option 3 ID : 441009247587
Option 4 ID : 441009247589
Status : Answered
Chosen Option : 3
Q.42 Which factor is least significant in determining the rating of a distribution transformer?
Ans 1. Load diversity factor

2. Expected future load growth

3. Type of oil used for cooling

4. Peak load demand

Question ID : 44100971152
Option 1 ID : 441009282991
Option 2 ID : 441009282992
Option 3 ID : 441009282993
Option 4 ID : 441009282994
Status : Answered
Chosen Option : 1

Q.43 If the phase voltage of a three-phase star-connected system is 200 V when the phases are
correctly connected, then line voltages are:
Ans 1. 200 V

2. 346.41 V

3. 173.2 V

4. 600 V

Question ID : 44100973831
Option 1 ID : 441009293556
Option 2 ID : 441009293555
Option 3 ID : 441009293554
Option 4 ID : 441009293557
Status : Answered
Chosen Option : 2

Q.44 When controlling a three-phase induction motor (3PIM) from the stator side, which of the
following methods is typically used?
Ans 1. Rotor Resistance Control

2. Stator Voltage Control

3. Cascaded Control

4. Variable Frequency Drive (VFD)

Question ID : 44100977802
Option 1 ID : 441009309208
Option 2 ID : 441009309209
Option 3 ID : 441009309206
Option 4 ID : 441009309207
Status : Answered
Chosen Option : 4

Q.45 One of the key advantages of EHVAC transmission systems is that it can ______.
Ans 1. provide power at low voltages suitable for domestic use

2. handle larger currents without excessive heating

3. provide the power to the load directly without any power transformer in between

4. reduce transmission losses significantly over long distances

Question ID : 44100970267
Option 1 ID : 441009279688
Option 2 ID : 441009279686
Option 3 ID : 441009279685
Option 4 ID : 441009279687
Status : Answered
Chosen Option : 4
Q.46 Which of the following is NOT included in a detailed estimate for a factory electrical
installation?
Ans 1. Equipment depreciation cost

2. Labour cost

3. Contingency expenses

4. Material cost

Question ID : 44100971322
Option 1 ID : 441009283681
Option 2 ID : 441009283680
Option 3 ID : 441009283682
Option 4 ID : 441009283679
Status : Answered
Chosen Option : 1

Q.47 In a power triangle, the hypotenuse represents the ______________.

Ans 1. reactive power

2. apparent power

3. power factor

4. active power

Question ID : 44100983455
Option 1 ID : 441009331585
Option 2 ID : 441009331583
Option 3 ID : 441009331582
Option 4 ID : 441009331584
Status : Answered
Chosen Option : 2

Q.48 Consider the following statements and select the correct option.

Statement 1: In a balanced star-connected system, the voltages across all phases are equal
in magnitude and separated by 120°.
Statement 2: In an unbalanced star-connected system, the voltages across the phases may
not be equal, and their phase differences may vary.
Ans 1. Statement 1 is incorrect, but Statement 2 is correct.

2. Statement 1 is correct, but Statement 2 is incorrect.

3. Both Statement 1 and Statement 2 are incorrect.

4. Both Statement 1 and Statement 2 are correct.

Question ID : 44100978980
Option 1 ID : 441009313853
Option 2 ID : 441009313852
Option 3 ID : 441009313851
Option 4 ID : 441009313850
Status : Answered
Chosen Option : 2
Q.49 Read the given assertion (A) and reason (R) and select the most appropriate option.

(A): Higher voltage transmission results in lower line losses.

(R): Increasing the transmission voltage decreases the current for the same amount of power,
and lower current results in less copper loss in the line.
Ans 1. (A) is true, but (R) is false.

2. (A) is false, but (R) is true.

3. Both (A) and (R) are true, and (R) is the correct explanation of (A).

4. Both (A) and (R) are true, but (R) is not the correct explanation of (A).

Question ID : 44100970466
Option 1 ID : 441009280485
Option 2 ID : 441009280486
Option 3 ID : 441009280483
Option 4 ID : 441009280484
Status : Answered
Chosen Option : 3

Q.50 In street lighting, why is maintaining the correct Space-Height Ratio important?
Ans 1. To avoid excessive overlapping of light beams

2. To ensure uniform road illumination and avoid dark spots

3. To minimise light pollution only

4. To minimise glare and light pollution

Question ID : 44100969625
Option 1 ID : 441009277140
Option 2 ID : 441009277142
Option 3 ID : 441009302030
Option 4 ID : 441009277141
Status : Answered
Chosen Option : 2

Q.51 A hydroelectric plant has a hydraulic efficiency of 90% and a generator efficiency of 95%.
What is the overall efficiency?
Ans 1. 90%

2. 95%

3. 100%

4. 85.5%

Question ID : 441009122703
Option 1 ID : 441009487722
Option 2 ID : 441009487723
Option 3 ID : 441009487724
Option 4 ID : 441009487721
Status : Answered
Chosen Option : 4
Q.52 Which of the following best describes the implication of Laplace's law in a magnetic circuit?
Ans 1. The magnetic field is always proportional to the distance.

2. Magnetic fields can only exist between poles of a magnet.

3. Magnetic field lines always form closed loops.

4. Magnetic fields cannot pass through materials.

Question ID : 44100962343
Option 1 ID : 441009248442
Option 2 ID : 441009248441
Option 3 ID : 441009248440
Option 4 ID : 441009248443
Status : Answered
Chosen Option : 3

Q.53 How is luminous flux related to radiant flux?

Ans 1. Luminous flux is always equal to radiant flux.

2. Luminous flux measures only infrared radiation.

3. Luminous flux is the total power emitted, including all wavelengths.

4. Luminous flux is radiant flux weighted by the human eye’s sensitivity to visible light.

Question ID : 44100969575
Option 1 ID : 441009276943
Option 2 ID : 441009276942
Option 3 ID : 441009276940
Option 4 ID : 441009276941
Status : Answered
Chosen Option : 4

Q.54 According to the Maximum Power Transfer Theorem, the maximum power is transferred from
a source to a load when _______.
Ans 1. the source resistance is equal to the load resistance

2. the source voltage is equal to the load voltage

3. the source current is maximum

4. the load resistance is twice the source resistance

Question ID : 44100978717
Option 1 ID : 441009312876
Option 2 ID : 441009312875
Option 3 ID : 441009312878
Option 4 ID : 441009312877
Status : Answered
Chosen Option : 1
Q.55 For the circuit shown below, find the value of to obtain maximum power
transferred from source to load .

Ans 1. 150 Ω

2. 250 Ω

3. 100 Ω

4. 750 Ω

Question ID : 44100978766
Option 1 ID : 441009313056
Option 2 ID : 441009313057
Option 3 ID : 441009313054
Option 4 ID : 441009313055
Status : Answered
Chosen Option : 1

Q.56 Which of the following statements is true for the four-quadrant operation of a three-phase
induction motor?
Ans 1. The motor operates in the fourth quadrant when it is running in regenerating mode with
negative speed and positive torque.
2. The motor operates in the third quadrant when it is running in motoring mode with
positive speed and negative torque.
3. The motor operates in the first quadrant when it is running in motoring mode at high
speed with low torque.
4. The motor operates in the second quadrant when it is running in braking mode with
positive speed and negative torque.

Question ID : 44100977796
Option 1 ID : 441009309183
Option 2 ID : 441009309185
Option 3 ID : 441009309182
Option 4 ID : 441009309184
Status : Answered
Chosen Option : 2

Q.57 Which of the following factors does NOT contribute to the onset of the corona effect in
EHVAC transmission lines?
Ans 1. High voltage

2. Small conductor diameter

3. High humidity

4. High atmospheric pressure

Question ID : 44100970242
Option 1 ID : 441009279586
Option 2 ID : 441009279588
Option 3 ID : 441009279587
Option 4 ID : 441009279585
Status : Answered
Chosen Option : 4
Q.58 At resonance condition in R-L-C circuit, the magnitude of current depends upon the
magnitude of:
Ans 1. L only

2. R, L and C

3. R only

4. C only

Question ID : 44100973730
Option 1 ID : 441009293219
Option 2 ID : 441009293221
Option 3 ID : 441009293218
Option 4 ID : 441009293220
Status : Answered
Chosen Option : 3

Q.59 What is the unit of Magnetomotive Force (MMF)?

Ans 1. Ampere-Turns (AT)

2. Tesla (T)

3. Ampere (A)

4. Weber (Wb)

Question ID : 44100962560
Option 1 ID : 441009249300
Option 2 ID : 441009249303
Option 3 ID : 441009249302
Option 4 ID : 441009249301
Status : Answered
Chosen Option : 1

Q.60 Signalling devices generally employ a ____________ motor.

Ans 1. servo

2. hysteresis

3. stepper

4. reluctance

Question ID : 44100987165
Option 1 ID : 441009346453
Option 2 ID : 441009346452
Option 3 ID : 441009346454
Option 4 ID : 441009346451
Status : Answered
Chosen Option : 4

Q.61 Instruments that require an external power source for operation (e.g., strain gauge) are
classified as:
Ans 1. absolute instruments

2. passive instruments

3. active instruments

4. contact instruments

Question ID : 441009135168
Option 1 ID : 441009537290
Option 2 ID : 441009537288
Option 3 ID : 441009537289
Option 4 ID : 441009537291
Status : Answered
Chosen Option : 2
Q.62 In a DC motor, which of the following is the contributor to the difference between the shaft
torque and the armature torque?
Ans 1. Field ohmic loss

2. Armature resistance

3. Voltage supplied to the motor

4. Mechanical losses such as friction and windage

Question ID : 44100949090
Option 1 ID : 441009195656
Option 2 ID : 441009195658
Option 3 ID : 441009195657
Option 4 ID : 441009195659
Status : Answered
Chosen Option : 1

Q.63

Ans
1.

2.

3.

4.

Question ID : 441009120294
Option 1 ID : 441009478221
Option 2 ID : 441009478220
Option 3 ID : 441009478219
Option 4 ID : 441009478218
Status : Not Answered
Chosen Option : --

Q.64 Match the following components of a Potential Transformer with their

correct descriptions.
Component Description
1. Core a) Prevents breakdown due to high voltage
2. Primary winding b) Elimination of bushing
3. Insulation c) Connected to the high-voltage side
4. Insulated casing d) For LV transformers, shell type is used

Ans 1. 1 → b, 2 → a, 3 → d, 4 → c

2. 1 → d, 2 → c, 3 → a, 4 → b

3. 1 → c, 2 → d, 3 → b, 4 → a

4. 1 → a, 2 → b, 3 → c, 4 → d

Question ID : 441009101762
Option 1 ID : 441009405061
Option 2 ID : 441009405059
Option 3 ID : 441009405060
Option 4 ID : 441009405062
Status : Answered
Chosen Option : 2
Q.65 What is the primary reason for the formation of built-in potential in a p-n junction?
Ans 1. Movement of free electrons and holes due to diffusion

2. Increase in temperature

3. Presence of an external electric field

4. External voltage applied across the junction

Question ID : 44100995852
Option 1 ID : 441009381363
Option 2 ID : 441009381365
Option 3 ID : 441009381364
Option 4 ID : 441009381362
Status : Answered
Chosen Option : 1

Q.66 What is the purpose of the laminated core in the stator and rotor of a three-phase induction
motor?
Ans 1. To provide insulation between windings

2. To reduce mechanical wear

3. To minimise eddy current losses

4. To increase the motor's starting torque

Question ID : 44100993298
Option 1 ID : 441009370904
Option 2 ID : 441009370901
Option 3 ID : 441009370903
Option 4 ID : 441009370902
Status : Answered
Chosen Option : 3

Q.67 Which of the following factors does NOT directly affect the generated EMF?
Ans 1. Magnetic flux per pole

2. Armature resistance

3. Speed of rotation

4. Number of armature conductors

Question ID : 441009135365
Option 1 ID : 441009538034
Option 2 ID : 441009538032
Option 3 ID : 441009538033
Option 4 ID : 441009538035
Status : Answered
Chosen Option : 4

Q.68 Which factor determines the best placement of lighting poles in public lighting installations?
Ans 1. Colour of the lighting fixture

2. Pole height, lamp wattage, and road width

3. Number of pedestrians

4. Distance between buildings

Question ID : 44100971380
Option 1 ID : 441009283913
Option 2 ID : 441009283912
Option 3 ID : 441009283914
Option 4 ID : 441009283911
Status : Answered
Chosen Option : 2
Q.69 A series RLC circuit has a resistor of 100 ohm, an inductor of 0.01 H and capacitance of 4
micro farad. The quality factor is:
Ans 1. 1

2. 0.5

3. 0.75

4. 0

Question ID : 44100973755
Option 1 ID : 441009293321
Option 2 ID : 441009293319
Option 3 ID : 441009293320
Option 4 ID : 441009293318
Status : Answered
Chosen Option : 2

Q.70 What happens to the transfer function of two blocks G1(s) and G2(s) connected in series?
Ans 1. They are subtracted: G1(s) − G2(s).

2. They are divided: G1(s) / G2(s).

3. They are added: G1(s) + G2(s).

4. They are multiplied: G1(s) * G2(s).

Question ID : 441009119552
Option 1 ID : 441009475322
Option 2 ID : 441009475321
Option 3 ID : 441009475319
Option 4 ID : 441009475320
Status : Answered
Chosen Option : 4

Q.71 Which of the following statements about MI instruments is INCORRECT?

Ans 1. They are based on the interaction between a soft iron element and a magnetic field.

2. They are of attraction and repulsion type.

3. They can be used to measure both AC and DC .

4. They are independent of frequency and temperature errors.

Question ID : 441009107762
Option 1 ID : 441009429060
Option 2 ID : 441009429059
Option 3 ID : 441009429062
Option 4 ID : 441009429061
Status : Answered
Chosen Option : 4

Q.72 Which cost estimation method is commonly used for public lighting projects?
Ans 1. Estimating based on personal judgment

2. Approximate method

3. Detailed estimate method

4. Random cost selection

Question ID : 44100971368
Option 1 ID : 441009283866
Option 2 ID : 441009283864
Option 3 ID : 441009283865
Option 4 ID : 441009283863
Status : Answered
Chosen Option : 3
Q.73 What type of device is a JFET?
Ans 1. Voltage-controlled bipolar device

2. Current-controlled bipolar device

3. Current-controlled unipolar device

4. Voltage-controlled unipolar device

Question ID : 44100995825
Option 1 ID : 441009381256
Option 2 ID : 441009381255
Option 3 ID : 441009381257
Option 4 ID : 441009381254
Status : Answered
Chosen Option : 4

Q.74 How much energy is approximately released per fission of a uranium-235 nucleus?
Ans 1. 10 MeV

2. 500 MeV

3. 200 MeV

4. 100 MeV

Question ID : 441009122734
Option 1 ID : 441009487845
Option 2 ID : 441009487848
Option 3 ID : 441009487847
Option 4 ID : 441009487846
Status : Marked For Review
Chosen Option : 3

Q.75 What is the advantage of using a DC welding machine over an AC welding machine?
Ans 1. DC welding eliminates the need for electrode coating

2. DC welding does not require a transformer

3. DC welding provides better control over arc stability

4. DC welding requires less power than AC welding

Question ID : 44100969478
Option 1 ID : 441009276557
Option 2 ID : 441009276559
Option 3 ID : 441009276556
Option 4 ID : 441009276558
Status : Answered
Chosen Option : 2

Q.76 The deflecting torque Td in an electrodynamic instrument is proportional to _________.

Ans 1. V2I

2. V2
3. VI

4. I2

Question ID : 441009112229
Option 1 ID : 441009446468
Option 2 ID : 441009446466
Option 3 ID : 441009446467
Option 4 ID : 441009446465
Status : Answered
Chosen Option : 4
Q.77 In an n-channel enhancement MOSFET, what happens if the gate-source voltage (VGS) is
zero?
Ans 1. The MOSFET operates in ohmic region.

2. The MOSFET is in cut-off state.

3. The MOSFET is in saturation region.

4. The MOSFET is fully conducting.

Question ID : 441009100636
Option 1 ID : 441009400533
Option 2 ID : 441009400531
Option 3 ID : 441009400532
Option 4 ID : 441009400530
Not Attempted and
Status :
Marked For Review
Chosen Option : --

Q.78 Which of the following conductor types would you most likely use in a high-voltage
transmission line to minimise the effects of corona discharge?
Ans 1. ACSR

2. AAAC

3. AAC

4. Bundled conductors

Question ID : 44100970123
Option 1 ID : 441009279113
Option 2 ID : 441009279116
Option 3 ID : 441009279114
Option 4 ID : 441009279115
Status : Answered
Chosen Option : 4

Q.79 In a magnetic circuit, the MMF is proportional to the _________.

Ans 1. area of the cross-section

2. reluctance of the circuit

3. product of current and number of turns

4. magnetic flux

Question ID : 44100962546
Option 1 ID : 441009249247
Option 2 ID : 441009249244
Option 3 ID : 441009249246
Option 4 ID : 441009249245
Status : Answered
Chosen Option : 3

Q.80 What does a summing junction (summation point) in a block diagram represent?
Ans 1. Differentiation of signals

2. Integration of signals

3. Addition or subtraction of signals

4. Multiplication of signals

Question ID : 441009105891
Option 1 ID : 441009421632
Option 2 ID : 441009421630
Option 3 ID : 441009421631
Option 4 ID : 441009421629
Status : Answered
Chosen Option : 3
Q.81 Graded insulators are used to improve string efficiency. What does this mean?
Ans 1. The insulators are made with different materials

2. The insulators are coated with a special insulation material

3. The voltage across each insulator is made to vary in a specific pattern

4. Insulators are placed at varying heights

Question ID : 44100969242
Option 1 ID : 441009275590
Option 2 ID : 441009275592
Option 3 ID : 441009275589
Option 4 ID : 441009275591
Status : Answered
Chosen Option : 3

Q.82 Which of the following is NOT true about drift in instruments?

Ans 1. The whole calibration gradually shifts due to slippage or permanent set.

2. Drift can be classified as zero drift, span drift, or zonal drift.

3. Drift refers to an undesired gradual change in the output over time, which can be
caused by environmental factors, component aging, or mechanical shifts.
4. Drift is independent of time and remains constant throughout the instrument's
operation.

Question ID : 441009106860
Option 1 ID : 441009425476
Option 2 ID : 441009425478
Option 3 ID : 441009425475
Option 4 ID : 441009425477
Status : Answered
Chosen Option : 4

Q.83 What is the slew rate of an operational amplifier?

Ans 1. The rate at which input current changes

2. The gain-bandwidth product of the op-amp

3. The ratio of input voltage to output voltage

4. The maximum rate of change of output voltage per unit time

Question ID : 441009109328
Option 1 ID : 441009435035
Option 2 ID : 441009435036
Option 3 ID : 441009435034
Option 4 ID : 441009435033
Status : Answered
Chosen Option : 4

Q.84 Three resistors each of 1 ohm are connected in star. If they are transferred to delta
connections, what will be the resistance of each resistor?
Ans 1. 3 ohm

2. 1 ohm

3. 2 ohm

4. 4 ohm

Question ID : 44100971913
Option 1 ID : 441009286017
Option 2 ID : 441009286015
Option 3 ID : 441009286016
Option 4 ID : 441009286018
Status : Answered
Chosen Option : 1
Q.85 What is the RMS (I_RMS) value of current for a half-wave rectifier?
Ans
1.

2.

3.

4.

Question ID : 441009109366
Option 1 ID : 441009435186
Option 2 ID : 441009435188
Option 3 ID : 441009435187
Option 4 ID : 441009435185
Status : Answered
Chosen Option : 3

Q.86 Which of the following is a feature of HVDC systems?

Ans 1. HVDC operates only at high frequencies

2. HVDC systems are ideal for short-distance power transmission

3. HVDC systems are cheaper to build and maintain than AC systems

4. HVDC system reduces the need for reactive power compensation

Question ID : 44100970350
Option 1 ID : 441009280009
Option 2 ID : 441009280010
Option 3 ID : 441009280012
Option 4 ID : 441009280011
Status : Answered
Chosen Option : 4

Q.87 Read the given assertion (A) and reason (R) and select the most appropriate option.

(A): The power loss in transmission lines increases as the length of the line increases.
(R): Longer lines have higher resistance and inductance, which increases the energy
dissipation during transmission.
Ans 1. Both (A) and (R) are true, but (R) is not the correct explanation of (A).

2. (A) is false, but (R) is true.

3. (A) is true, but (R) is false.

4. Both (A) and (R) are true, and (R) is the correct explanation of (A).

Question ID : 44100970453
Option 1 ID : 441009280432
Option 2 ID : 441009280434
Option 3 ID : 441009280433
Option 4 ID : 441009280431
Status : Answered
Chosen Option : 4
Q.88 In a series R-L circuit, if the frequency of the AC supply is ___________ the inductive reactance.
Ans 1. directly proportional to

2. inversely proportional to

3. inversely proportional to square of

4. directly proportional to the square of

Question ID : 44100983595
Option 1 ID : 441009332128
Option 2 ID : 441009332129
Option 3 ID : 441009332130
Option 4 ID : 441009332131
Status : Answered
Chosen Option : 1

Q.89 In an energy band diagram of a semiconductor, which band is completely filled at absolute
zero temperature?
Ans 1. Valence band

2. Fermi level

3. Forbidden energy gap

4. Conduction band

Question ID : 44100995765
Option 1 ID : 441009381025
Option 2 ID : 441009381027
Option 3 ID : 441009381026
Option 4 ID : 441009381024
Status : Answered
Chosen Option : 1

Q.90 Why does the torque of an induction motor decrease at high speed?
Ans 1. Due to increased slip

2. Due to reduced flux linkage

3. Due to reduced rotor resistance

4. Due to excessive current draw

Question ID : 44100967414
Option 1 ID : 441009268422
Option 2 ID : 441009268424
Option 3 ID : 441009268423
Option 4 ID : 441009268425
Status : Answered
Chosen Option : 1

Q.91 If a good weld is achieved, what is the most likely outcome when a welded joint is subjected
to extreme stress?
Ans 1. The base metal will break before the weld.

2. The entire structure will collapse immediately.

3. The weld will expand and become stronger.

4. The weld will break first.

Question ID : 44100969465
Option 1 ID : 441009276505
Option 2 ID : 441009276506
Option 3 ID : 441009276507
Option 4 ID : 441009276504
Status : Answered
Chosen Option : 1
Q.92 Which of the following factors has the greatest impact on transformer cost in a substation?
Ans 1. Number of cooling fans

2. Type of transformer oil used

3. Mounting height of the transformer

4. Core and winding material

Question ID : 44100971149
Option 1 ID : 441009282981
Option 2 ID : 441009282979
Option 3 ID : 441009282982
Option 4 ID : 441009282980
Status : Answered
Chosen Option : 4

Q.93 In the Work Law, the work done by the magnetising force is used to __________.
Ans 1. establish the magnetic field

2. decrease the reluctance of the circuit

3. maintain the current in the coil

4. overcome the resistance of the core material

Question ID : 44100962350
Option 1 ID : 441009248470
Option 2 ID : 441009248471
Option 3 ID : 441009248468
Option 4 ID : 441009248469
Status : Answered
Chosen Option : 3

Q.94 In a three-phase slip ring induction motor, the effect of increasing external resistance in the
rotor circuit on the starting torque is:
Ans 1. it increases the starting torque indefinitely

2. it decreases the starting torque

3. it increases the starting torque up to a certain value

4. it has no effect on the starting torque

Question ID : 44100978575
Option 1 ID : 441009312318
Option 2 ID : 441009312315
Option 3 ID : 441009312316
Option 4 ID : 441009312317
Status : Answered
Chosen Option : 3

Q.95 For a non-magnetic material, the relative permeability μr​is ______.

Ans 1. much greater than 1

2. zero

3. 1

4. much less than 1

Question ID : 44100962579
Option 1 ID : 441009249377
Option 2 ID : 441009249378
Option 3 ID : 441009249376
Option 4 ID : 441009249379
Status : Answered
Chosen Option : 3
Q.96 Which of the following statements is/are correct?
Statement 1: At resonance in a series R-L-C circuit, the voltage across the inductor and
capacitor can become much higher than the source voltage.
Statement 2: The voltage magnification occurs because the inductive reactance and
capacitive reactance cancel each other at resonance.
Ans 1. Statement 1 is false, but Statement 2 is true.

2. Statement 1 is true, but Statement 2 is false.

3. Both Statement 1 and Statement 2 are true.

4. Both Statement 1 and Statement 2 are false.

Question ID : 44100983893
Option 1 ID : 441009333310
Option 2 ID : 441009333309
Option 3 ID : 441009333308
Option 4 ID : 441009333311
Status : Answered
Chosen Option : 3

Q.97 In terms of location, which of the following options is correct about rural distribution
substations?
Ans 1. They are typically located close to residential areas in urban centres.

2. They are located in remote areas to distribute electricity to rural regions.

3. They usually operate at higher voltage levels than urban substations.

4. They supply power to high-demand industrial areas.

Question ID : 44100963008
Option 1 ID : 441009251068
Option 2 ID : 441009251069
Option 3 ID : 441009251067
Option 4 ID : 441009251070
Status : Answered
Chosen Option : 2

Q.98 If all input resistors and the feedback resistor in an inverting summing amplifier have the
same value, the output voltage is equal to:
Ans 1. the difference of the input voltages

2. the average of the input voltages

3. the sum of the input voltages, inverted

4. the product of the input voltages

Question ID : 44100993548
Option 1 ID : 441009372123
Option 2 ID : 441009372121
Option 3 ID : 441009372122
Option 4 ID : 441009372124
Not Attempted and
Status :
Marked For Review
Chosen Option : --
Q.99 A universal motor can operate on:
Ans 1. AC only

2. neither AC nor DC

3. DC only

4. both AC and DC

Question ID : 44100989497
Option 1 ID : 441009356139
Option 2 ID : 441009356142
Option 3 ID : 441009356140
Option 4 ID : 441009356141
Status : Answered
Chosen Option : 4

Q.10 If a power system has a total demand of 1000 MW and a required spinning reserve of 10%,
0 what should be the total available generation capacity?
Ans 1. 1050 MW

2. 1000 MW

3. 1200 MW

4. 1100 MW

Question ID : 441009121526
Option 1 ID : 441009483095
Option 2 ID : 441009483094
Option 3 ID : 441009483097
Option 4 ID : 441009483096
Status : Answered
Chosen Option : 4

Q.10 At higher frequencies, the skin effect causes _____.

1
Ans 1. a decrease in the effective resistance of the conductor

2. an increase in the total resistance of the conductor

3. a reduction in the reactance of the conductor

4. no change in the conductor's resistance

Question ID : 44100964096
Option 1 ID : 441009255391
Option 2 ID : 441009255392
Option 3 ID : 441009255393
Option 4 ID : 441009255394
Status : Answered
Chosen Option : 2

Q.10 In the no-load test of a three-phase induction motor, which of the following is measured
2 directly?
Ans 1. Input power

2. Mechanical losses

3. Rotor resistance

4. Stator resistance

Question ID : 44100977795
Option 1 ID : 441009309180
Option 2 ID : 441009309181
Option 3 ID : 441009309179
Option 4 ID : 441009309178
Status : Answered
Chosen Option : 1
Q.10 In a series RLC circuit, the phase difference between the current in the inductor and the
3 current in the resistor is:
Ans 1. 120 degree

2. 90 degree

3. 60 degree

4. zero degree

Question ID : 44100973653
Option 1 ID : 441009292929
Option 2 ID : 441009292928
Option 3 ID : 441009292927
Option 4 ID : 441009292926
Status : Answered
Chosen Option : 3

Q.10 A PMMC instrument experiences errors due to high ambient temperatures. What is the
4 primary cause?
Ans 1. Magnetic field weakening

2. Resistance variation in the moving coil

3. Change in spring stiffness

4. Expansion of the coil

Question ID : 441009107453
Option 1 ID : 441009427819
Option 2 ID : 441009427818
Option 3 ID : 441009427817
Option 4 ID : 441009427816
Status : Answered
Chosen Option : 3

Q.10 In a series AC circuit with a pure capacitor, the voltage across the capacitor ____________.
5
Ans 1. leads the current by 90°

2. is in phase with the current

3. lags the current by 90°

4. is zero

Question ID : 44100983813
Option 1 ID : 441009332992
Option 2 ID : 441009332994
Option 3 ID : 441009332993
Option 4 ID : 441009332995
Status : Answered
Chosen Option : 3
Q.10 Which of the following options best describes the secondary distribution lines?
6
Ans 1. They distribute electricity at medium to high voltage to large industrial consumers.

2. They connect power plants to local grid systems.

3. They carry high-voltage power from the power plant to the substations.

4. They distribute power to homes and businesses at low voltages.

Question ID : 44100963003
Option 1 ID : 441009251048
Option 2 ID : 441009251050
Option 3 ID : 441009251047
Option 4 ID : 441009251049
Status : Answered
Chosen Option : 4

Q.10 In a grid distribution scheme, what happens if one of the feeders fails?
7
Ans 1. The load is shifted to a secondary substation.

2. Power generation will stop until repairs are made.

3. The load is redistributed through the alternate feeders, maintaining the supply.

4. The entire grid will fail immediately.

Question ID : 44100962076
Option 1 ID : 441009247332
Option 2 ID : 441009247333
Option 3 ID : 441009247331
Option 4 ID : 441009247330
Status : Answered
Chosen Option : 3

Q.10 The proximity to existing infrastructure is an important factor in selecting a substation site
8 because __________.
Ans 1. it simplifies the regulatory approval process

2. it minimises the need for new power lines and reduces the overall cost of construction

3. it increases the overall voltage capacity of the substation

4. it reduces the substation's power loss

Question ID : 44100963010
Option 1 ID : 441009251078
Option 2 ID : 441009251076
Option 3 ID : 441009251077
Option 4 ID : 441009251075
Status : Answered
Chosen Option : 2
Q.10 The following figure represents a ______ used in the single line diagram representation of
9 electric supply in transmission systems.

Ans 1. isolator

2. bus bar

3. transformer

4. alternator

Question ID : 44100969187
Option 1 ID : 441009275371
Option 2 ID : 441009275370
Option 3 ID : 441009275369
Option 4 ID : 441009275372
Status : Answered
Chosen Option : 1

Q.11 Capacitor DOES NOT allow the sudden change of:

0
Ans 1. current

2. energy

3. flux

4. voltage

Question ID : 44100973714
Option 1 ID : 441009293168
Option 2 ID : 441009293167
Option 3 ID : 441009293166
Option 4 ID : 441009293169
Status : Answered
Chosen Option : 4

Q.11 Which of the following is the correct sequence for applying Fleming's Left-Hand Rule?
1
Ans 1. Thumb = Force, Forefinger = Magnetic Field, Middle finger = Current

2. Thumb = Magnetic Field, Forefinger = Force, Middle finger = Current

3. Thumb = Current, Forefinger = Force, Middle finger = Magnetic Field

4. Thumb = Force, Forefinger = Current, Middle finger = Magnetic Field

Question ID : 44100962460
Option 1 ID : 441009248911
Option 2 ID : 441009248909
Option 3 ID : 441009248910
Option 4 ID : 441009248908
Status : Answered
Chosen Option : 1
Q.11 Which of the following is a primary classification of outdoor lighting installations?
2
Ans 1. Natural and artificial lighting

2. Decorative and task lighting

3. Battery-operated and grid-powered lighting

4. Indoor and industrial lighting

Question ID : 44100971373
Option 1 ID : 441009283886
Option 2 ID : 441009283883
Option 3 ID : 441009283885
Option 4 ID : 441009283884
Status : Answered
Chosen Option : 3

Q.11 Consider the following statements and select the correct option.
3
Statement 1: In a star-connected system, the reactive power is evenly distributed across all
phases in a balanced load.
Statement 2: In a delta-connected system, the reactive power in each phase is the same as
the total reactive power of the system.
Ans 1. Statement 1 is correct, but Statement 2 is incorrect.

2. Statement 1 is incorrect, but Statement 2 is correct.

3. Both Statement 1 and Statement 2 are incorrect.

4. Both Statement 1 and Statement 2 are correct.

Question ID : 44100978967
Option 1 ID : 441009313808
Option 2 ID : 441009313809
Option 3 ID : 441009313807
Option 4 ID : 441009313806
Not Attempted and
Status :
Marked For Review
Chosen Option : --

Q.11 What is the Laplace transform of a unit parabolic function, p(t) = t2/2?
4
Ans 1. 1/s

2. 1/s2

3. 1/s3

4. 2/s3

Question ID : 441009119845
Option 1 ID : 441009476487
Option 2 ID : 441009476488
Option 3 ID : 441009476489
Option 4 ID : 441009476490
Status : Answered
Chosen Option : 2
Q.11 If two transmission lines are of equal length but have different support heights, the conductor
5 in the line with the greater height will ______.
Ans 1. have smaller sag

2. have greater sag

3. be unaffected by height difference

4. have the same sag

Question ID : 44100970105
Option 1 ID : 441009279042
Option 2 ID : 441009279041
Option 3 ID : 441009279044
Option 4 ID : 441009279043
Status : Answered
Chosen Option : 3

Q.11 In the electrical equivalent model of a practical op-amp, what component is responsible for
6 the finite gain?
Ans 1. Inductor in the feedback path

2. Voltage-controlled voltage source

3. Current-controlled current source

4. Resistor at the input terminal

Question ID : 441009106319
Option 1 ID : 441009423302
Option 2 ID : 441009423299
Option 3 ID : 441009423301
Option 4 ID : 441009423300
Status : Answered
Chosen Option : 2

Q.11 Which of the following tests is NOT performed on an energy meter?

7
Ans 1. Phantom loading test

2. Starting test

3. Short circuit test

4. Creep test

Question ID : 441009112246
Option 1 ID : 441009446547
Option 2 ID : 441009446546
Option 3 ID : 441009446548
Option 4 ID : 441009446545
Status : Answered
Chosen Option : 3
Q.11 Why is a Measurement Book (MB) important in the billing process of an electrical project?
8
Ans 1. It records the work completed for accurate billing.

2. It helps electricians memorize circuit connections.

3. It acts as a guide for future electrical designs.

4. It contains a list of electrical safety procedures.

Question ID : 44100971208
Option 1 ID : 441009283223
Option 2 ID : 441009283224
Option 3 ID : 441009283225
Option 4 ID : 441009283226
Status : Answered
Chosen Option : 1

Q.11 Which of the following factors does NOT directly affect the voltage drop in a distribution
9 system?
Ans 1. The types of power generation plant from where distribution line is connected via
transmission line
2. Length of the distribution lines

3. The material of the conductors

4. The load current flowing through the system

Question ID : 44100962090
Option 1 ID : 441009247389
Option 2 ID : 441009247386
Option 3 ID : 441009247387
Option 4 ID : 441009247388
Status : Answered
Chosen Option : 1

Q.12 When the load power factor (p.f.) in a 3-phase circuit is unity, then the relation between the
0 apparent power (S) and true power (P) is:
Ans 1. apparent power (S) is equal two times true power (P)

2. apparent power (S) is equal to true power (P)

3. apparent power (S) is equal to three times true power (P)

4. apparent power (S) is equal to 1.732 times true power (P)

Question ID : 44100973801
Option 1 ID : 441009293460
Option 2 ID : 441009293458
Option 3 ID : 441009293459
Option 4 ID : 441009293461
Status : Answered
Chosen Option : 2

Section : General English

Q.1 Select the correct option to identify the misspelt word in the following sentence.

The company’s new policy aims to maintain a tranquil and harmonious work enviroment.
Ans 1. enviroment

2. harmonious

3. maintain

4. tranquil

Question ID : 44100938726
Option 1 ID : 441009154478
Option 2 ID : 441009154477
Option 3 ID : 441009154475
Option 4 ID : 441009154476
Status : Answered
Chosen Option : 1

Q.2 Select the proverb that can replace the underlined segment in the following sentence without
changing its meaning.

She was worried about her exam results, but I told her that worrying would only make time
pass slowly.
Ans 1. a watched pot never boils

2. a rolling stone gathers no moss

3. a stitch in time saves nine

4. don’t cry over spilled milk

Question ID : 44100938716
Option 1 ID : 441009154437
Option 2 ID : 441009154435
Option 3 ID : 441009154436
Option 4 ID : 441009154438
Status : Answered
Chosen Option : 1

Q.3 Sentences of a paragraph are given below in jumbled order. Arrange the sentences in the
correct order to form a meaningful and coherent paragraph.

P) The children gathered around their grandfather, eager to listen.

Q) The old man told them stories about his childhood.
R) He described how life was different in his younger days.
S) They listened with wide eyes, fascinated by his tales.
Ans 1. PQRS

2. QSPR

3. RQPS

4. SRQP

Question ID : 44100938691
Option 1 ID : 441009154336
Option 2 ID : 441009154337
Option 3 ID : 441009154338
Option 4 ID : 441009154335
Status : Answered
Chosen Option : 1
Q.4 Select the most appropriate ANTONYM of the given word.

Candid
Ans 1. Tedious

2. Forthcoming

3. Snobbish

4. Restrained

Question ID : 44100938720
Option 1 ID : 441009154452
Option 2 ID : 441009154451
Option 3 ID : 441009154453
Option 4 ID : 441009154454
Status : Answered
Chosen Option : 1

Q.5 Select the most appropriate article to fill in the blank. If no article is needed, select 'No article
required'.

He bought _______ university textbook for his research on economics.

Ans 1. the

2. No article required

3. a

4. an

Question ID : 44100937117
Option 1 ID : 441009147959
Option 2 ID : 441009147960
Option 3 ID : 441009147957
Option 4 ID : 441009147958
Status : Answered
Chosen Option : 3

Q.6 Select the option that can be used as a one-word substitute for the given group of words.

A speech given at a funeral

Ans 1. Dialogue

2. Eulogy

3. Epilogue

4. Monologue

Question ID : 44100938707
Option 1 ID : 441009154400
Option 2 ID : 441009154401
Option 3 ID : 441009154402
Option 4 ID : 441009154399
Status : Answered
Chosen Option : 3
 Comprehension:
Read the given passage and answer the questions that follow.

Artificial Intelligence (AI) has rapidly transformed the modern world, influencing industries
ranging from healthcare to entertainment. AI-powered systems can diagnose diseases,
recommend movies, and even drive cars. However, this progress has also sparked debates
about its ethical implications. While AI enhances efficiency and reduces human effort, critics
argue that it threatens jobs and raises concerns about data privacy.
One of the biggest challenges is ensuring that AI makes fair and unbiased decisions. Since AI
learns from data, any bias in that data can lead to unfair outcomes, particularly in hiring,
lending, and law enforcement. To prevent this, researchers are working on developing
transparent and ethical AI systems. Despite these challenges, AI continues to evolve, and its
future seems promising. Many experts believe that AI will complement human intelligence
rather than replace it. The key lies in responsible innovation — ensuring that AI benefits society
while addressing its risks.

SubQuestion No : 7
Q.7 What is the passage’s overall view on the future of AI?
Ans 1. AI will eventually replace most human jobs.

2. AI is only useful in entertainment and healthcare.

3. AI has potential benefits if developed responsibly.

4. AI is dangerous and should be regulated.

Question ID : 44100938733
Option 1 ID : 441009154500
Option 2 ID : 441009154502
Option 3 ID : 441009154501
Option 4 ID : 441009154499
Status : Answered
Chosen Option : 3

Comprehension:
Read the given passage and answer the questions that follow.

Artificial Intelligence (AI) has rapidly transformed the modern world, influencing industries
ranging from healthcare to entertainment. AI-powered systems can diagnose diseases,
recommend movies, and even drive cars. However, this progress has also sparked debates
about its ethical implications. While AI enhances efficiency and reduces human effort, critics
argue that it threatens jobs and raises concerns about data privacy.
One of the biggest challenges is ensuring that AI makes fair and unbiased decisions. Since AI
learns from data, any bias in that data can lead to unfair outcomes, particularly in hiring,
lending, and law enforcement. To prevent this, researchers are working on developing
transparent and ethical AI systems. Despite these challenges, AI continues to evolve, and its
future seems promising. Many experts believe that AI will complement human intelligence
rather than replace it. The key lies in responsible innovation — ensuring that AI benefits society
while addressing its risks.

SubQuestion No : 8
Q.8 According to the passage, how do researchers aim to address the challenges of AI?
Ans 1. By developing transparent and ethical AI systems

2. By allowing AI to replace human intelligence

3. By stopping AI development altogether

4. By increasing AI’s ability to make decisions without human input

Question ID : 44100938732
Option 1 ID : 441009154496
Option 2 ID : 441009154498
Option 3 ID : 441009154495
Option 4 ID : 441009154497
Status : Answered
Chosen Option : 1
 Comprehension:
Read the given passage and answer the questions that follow.

Artificial Intelligence (AI) has rapidly transformed the modern world, influencing industries
ranging from healthcare to entertainment. AI-powered systems can diagnose diseases,
recommend movies, and even drive cars. However, this progress has also sparked debates
about its ethical implications. While AI enhances efficiency and reduces human effort, critics
argue that it threatens jobs and raises concerns about data privacy.
One of the biggest challenges is ensuring that AI makes fair and unbiased decisions. Since AI
learns from data, any bias in that data can lead to unfair outcomes, particularly in hiring,
lending, and law enforcement. To prevent this, researchers are working on developing
transparent and ethical AI systems. Despite these challenges, AI continues to evolve, and its
future seems promising. Many experts believe that AI will complement human intelligence
rather than replace it. The key lies in responsible innovation — ensuring that AI benefits society
while addressing its risks.

SubQuestion No : 9
Q.9 What is one major ethical concern regarding AI mentioned in the passage?
Ans 1. AI increases the cost of living for most people.

2. AI is not advanced enough to perform complex tasks.

3. AI can lead to unfair decisions due to biased data.

4. AI is incapable of learning from human behaviour.

Question ID : 44100938731
Option 1 ID : 441009154492
Option 2 ID : 441009154491
Option 3 ID : 441009154493
Option 4 ID : 441009154494
Status : Answered
Chosen Option : 3

Q.10 Select the most appropriate option to fill in the blank.

The scientist presented a _______ theory that challenged the existing beliefs in the field of
physics.
Ans 1. credulity

2. credibility

3. credible

4. credulous

Question ID : 44100937121
Option 1 ID : 441009147975
Option 2 ID : 441009147976
Option 3 ID : 441009147973
Option 4 ID : 441009147974
Status : Answered
Chosen Option : 3

Section : Reasoning
Q.1 What should come in place of the question mark (?) in the given series?

12, 25, 51, 103, 207, ?

Ans 1. 415

2. 414

3. 411

4. 413

Question ID : 44100929309
Option 1 ID : 441009116716
Option 2 ID : 441009116714
Option 3 ID : 441009116717
Option 4 ID : 441009116715
Status : Answered
Chosen Option : 1

Q.2 M is the mother of A. A is the brother of T. T is the father of E. E is the wife of R. How is M
related to R?
Ans 1. Wife's father's mother

2. Wife's father's sister

3. Father's mother

4. Wife's father

Question ID : 44100934204
Option 1 ID : 441009136228
Option 2 ID : 441009136227
Option 3 ID : 441009136229
Option 4 ID : 441009136226
Status : Answered
Chosen Option : 1

Q.3 If ‘X’ stands for ‘÷’, ‘Y’ stands for ‘×’, ‘Z’ stands for ‘+’, and ‘W’ stands for ‘−’, then the resultant
of which of the following would be 50?
Ans 1. 40 Z 8 Y 2 W 6 X 2

2. 80 W 10 Z 15 Y 2 X 5

3. 60 X 3 Z 20 Y 2 W 10

4. 72 Y 2 X 6 W 12 Z 8

Question ID : 44100929300
Option 1 ID : 441009116678
Option 2 ID : 441009116681
Option 3 ID : 441009116679
Option 4 ID : 441009116680
Status : Answered
Chosen Option : 3
Q.4 Refer to the following letter series and answer the question that follows.

(Left) Z B O W N E N F M T T H V A N L T O L U Y (Right)

How many such vowels are there that are immediately preceded by a consonant and also
immediately followed by a vowel?
Ans 1. Three

2. None

3. Two

4. One

Question ID : 44100935708
Option 1 ID : 441009142370
Option 2 ID : 441009142367
Option 3 ID : 441009142369
Option 4 ID : 441009142368
Status : Answered
Chosen Option : 2

Q.5 In a certain code language, ‘WRAP’ is coded as ‘5247’ and ‘PAIR’ is coded as ‘6572’. What is
the code for ‘I’ in the given code language?
Ans 1. 6

2. 7

3. 2

4. 5

Question ID : 44100934210
Option 1 ID : 441009136250
Option 2 ID : 441009136252
Option 3 ID : 441009136253
Option 4 ID : 441009136251
Status : Answered
Chosen Option : 1

Q.6 Each of J, K, O, P, Q, R, and S has an exam on a different day of a week starting from Monday
and ending on Sunday of the same week. Only one person has exam after O. Only two people
have exam between O and Q. Only three people have exam between Q and J. Only one person
has exam between K and R. S has exam immediately before K.
How many people have exam between P and K?
Ans 1. Four

2. One

3. Two

4. Three

Question ID : 44100935682
Option 1 ID : 441009142266
Option 2 ID : 441009142263
Option 3 ID : 441009142264
Option 4 ID : 441009142265
Status : Answered
Chosen Option : 3
Q.7 Select the pair which follows the same pattern as that followed by the two set of pairs given
below. Both pairs follow the same pattern.

OPI : JSJ
MJO : HMP
Ans 1. ZER : UHR

2. LGT : GIU

3. FDE : AGF

4. LOQ : GRQ

Question ID : 44100935890
Option 1 ID : 441009143094
Option 2 ID : 441009143092
Option 3 ID : 441009143093
Option 4 ID : 441009143091
Status : Answered
Chosen Option : 3

Q.8 If ‘P’ stands for ‘×’, ‘Q’ stands for ‘÷’, ‘R’ stands for ‘+’, and ‘S’ stands for ‘−’, then the resultant
of which of the following would be 55?
Ans 1. 30 Q 3 P 5 R 8 S 3

2. 24 P 2 S 6 Q 3 R 9

3. 36 P 2 Q 4 R 12 S 6

4. 18 Q 2 R 10 P 3 S 5

Question ID : 44100929296
Option 1 ID : 441009116664
Option 2 ID : 441009116663
Option 3 ID : 441009116665
Option 4 ID : 441009116662
Status : Answered
Chosen Option : 2

Q.9 Select the pair which follows the same pattern as that followed by the two set of pairs given
below. Both pairs follow the same pattern.
HLT : FOX
GTP : EWT
Ans 1. KIP : IKT

2. NUN : LXR

3. UIR : SLU

4. SEQ : QHT

Question ID : 44100935881
Option 1 ID : 441009143057
Option 2 ID : 441009143056
Option 3 ID : 441009143055
Option 4 ID : 441009143058
Status : Answered
Chosen Option : 2
Q.10 In a certain code language, ‘NODE’ is coded as ‘7194’ and ‘DEMO’ is coded as ‘4761’. What is
the code for ‘M’ in the given code language?
Ans 1. 7

2. 4

3. 1

4. 6

Question ID : 44100935875
Option 1 ID : 441009143032
Option 2 ID : 441009143031
Option 3 ID : 441009143034
Option 4 ID : 441009143033
Status : Answered
Chosen Option : 4

Q.11 IL 18 is related to KO 6 in a certain way. In the same way, OF 9 is related to QI -3. To which of
the following is NU 23 related following the same logic?
Ans 1. PW 11

2. OX 9

3. PX 11

4. OW 9

Question ID : 44100935904
Option 1 ID : 441009143144
Option 2 ID : 441009143145
Option 3 ID : 441009143146
Option 4 ID : 441009143143
Status : Answered
Chosen Option : 3
Q.12 Select the figure from among the given options that can replace the question mark (?) in the
following series.

Ans

1.

2.

3.

4.

Question ID : 44100938164
Option 1 ID : 441009152222
Option 2 ID : 441009152221
Option 3 ID : 441009152223
Option 4 ID : 441009152220
Status : Answered
Chosen Option : 4

Q.13 KH 12 is related to NF −5 in a certain way. In the same way, NU 13 is related to QS −4. To

which of the following is KQ 20 related following the same logic?
Ans 1. NP 3

2. MO 1

3. MP 1

4. NO 3

Question ID : 44100935902
Option 1 ID : 441009143138
Option 2 ID : 441009143135
Option 3 ID : 441009143137
Option 4 ID : 441009143136
Status : Answered
Chosen Option : 4
Q.14 Each of J, K, O, P, Q, R, and S has an exam on a different day of a week starting from Monday
and ending on Sunday of the same week. Only two people have exam between Q and O. Only
two people have exam after O. Only four people have exam between P and Q. R has exam
immediately after S. J does not have exam on Monday.
How many people have exam between J and K?
Ans 1. Two

2. One

3. Four

4. Three

Question ID : 44100935678
Option 1 ID : 441009142248
Option 2 ID : 441009142247
Option 3 ID : 441009142250
Option 4 ID : 441009142249
Status : Answered
Chosen Option : 3

Q.15 In a certain code language, ‘RITE’ is coded as ‘2861’ and ‘TIDE’ is coded as ‘3168’. What is the
code for ‘D’ in the given code language?
Ans 1. 1

2. 3

3. 6

4. 8

Question ID : 44100935873
Option 1 ID : 441009143024
Option 2 ID : 441009143023
Option 3 ID : 441009143026
Option 4 ID : 441009143025
Status : Answered
Chosen Option : 2

Section : Quantitative Aptitude

Q.1 The average of 8 numbers is 29. If each number is increased by 4, what will the new average
be?
Ans 1. 37

2. 8

3. 29

4. 33

Question ID : 441009151919
Option 1 ID : 441009602841
Option 2 ID : 441009602842
Option 3 ID : 441009602840
Option 4 ID : 441009602839
Status : Answered
Chosen Option : 4
Q.2

Ans 1. 4900

2. 5100

3. 5000

4. 4800

Question ID : 441009151897
Option 1 ID : 441009602754
Option 2 ID : 441009602753
Option 3 ID : 441009602752
Option 4 ID : 441009602751
Status : Answered
Chosen Option : 4

Q.3 Aman and Pawan together invested ₹47,000 in a business. At the end of the year, out of a
total profit of ₹14,400, Pawan's share was ₹6,300. What was the difference between their
investments?
Ans 1. ₹3,998

2. ₹5,875

3. ₹5,745

4. ₹7,256

Question ID : 441009151938
Option 1 ID : 441009602918
Option 2 ID : 441009602915
Option 3 ID : 441009602917
Option 4 ID : 441009602916
Status : Answered
Chosen Option : 2

Q.4 A 160 m long train overtakes a man moving at a speed of 10 km/hr (in same direction) in 12
seconds. How much time (in seconds) will it take this train to completely cross another 390
m long train, moving in the opposite direction at a speed of 41 km/hr?
Ans 1. 20

2. 33

3. 10

4. 18

Question ID : 441009151949
Option 1 ID : 441009602959
Option 2 ID : 441009602960
Option 3 ID : 441009602962
Option 4 ID : 441009602961
Not Attempted and
Status :
Marked For Review
Chosen Option : --
Q.5 Lucknow Express leaves Lucknow at 2:30 p.m. and reaches Gorakhpur at 8:30 p.m. The
average speed of the train is 110 hm/hr. What is the distance (in km) from Lucknow to
Gorakhpur?
Ans 1. 640

2. 620

3. 660

4. 680

Question ID : 441009152034
Option 1 ID : 441009603300
Option 2 ID : 441009603299
Option 3 ID : 441009603301
Option 4 ID : 441009603302
Status : Answered
Chosen Option : 3

Q.6 The mean proportional between 0.4 and 6.4 is _____.

Ans 1. 160

2. 1.6

3. 0.16

4. 16

Question ID : 441009151249
Option 1 ID : 441009600208
Option 2 ID : 441009600207
Option 3 ID : 441009600205
Option 4 ID : 441009600206
Status : Answered
Chosen Option : 2

Q.7 Find the simple interest (in closest integral ₹) on ₹2,000 at 7.5% per annum rate of interest
for the period from 24 February 2024 to 25 April 2024.
Ans 1. 25

2. 24

3. 26

4. 23

Question ID : 441009152022
Option 1 ID : 441009603251
Option 2 ID : 441009603252
Option 3 ID : 441009603253
Option 4 ID : 441009603254
Status : Answered
Chosen Option : 1

Q.8 The sum of two numbers is 75 and their LCM is 854. The two numbers are:
Ans 1. 7, 68

2. 19, 56

3. 12, 63

4. 14, 61

Question ID : 441009151997
Option 1 ID : 441009603154
Option 2 ID : 441009603153
Option 3 ID : 441009603152
Option 4 ID : 441009603151
Status : Answered
Chosen Option : 4
Q.9 The cost of 6 pens and 5 notebooks is ₹192. The cost of 4 notebooks exceeds the cost of 8
pens by ₹64. What is the cost of 9 pens and 6 notebooks?
Ans 1. ₹245

2. ₹243

3. ₹239

4. ₹242

Question ID : 441009151850
Option 1 ID : 441009602565
Option 2 ID : 441009602563
Option 3 ID : 441009602564
Option 4 ID : 441009602566
Status : Answered
Chosen Option : 2

Q.10 The difference between the simple interest and compound interest, compounded annually, on
a certain sum of money for two years at 18% per annum is ₹56. Find the sum. [Give your
answer rounded off to the nearest integer.]
Ans 1. ₹1,735

2. ₹1,728

3. ₹1,708

4. ₹1,710

Question ID : 441009151883
Option 1 ID : 441009602696
Option 2 ID : 441009602695
Option 3 ID : 441009602698
Option 4 ID : 441009602697
Status : Answered
Chosen Option : 2

Q.11 A dealer sets the marked price of an electronic item as ₹35,750. Successive discounts of
12%, 14%, and 16% are offered. What is the total percentage discount on the marked price?

(Rounded to two decimal places)

Ans 1. 31.45%

2. 36.43%

3. 33.57%

4. 39.35%

Question ID : 441009151231
Option 1 ID : 441009600137
Option 2 ID : 441009600139
Option 3 ID : 441009600138
Option 4 ID : 441009600140
Not Attempted and
Status :
Marked For Review
Chosen Option : --
Q.12 Which of the following numbers is divisible by 19?
Ans 1. 8077586

2. 7066505

3. 6775593

4. 7132961

Question ID : 441009151995
Option 1 ID : 441009603145
Option 2 ID : 441009603146
Option 3 ID : 441009603144
Option 4 ID : 441009603143
Not Attempted and
Status :
Marked For Review
Chosen Option : --

Q.13 A manufacturer sells a product to a wholesaler at a profit of 33%. The wholesaler, in turn,
sells it to a retailer at a profit of 28%, and the retailer sells it to a customer at a profit of 25%.
If the customer pays ₹532, find the cost price (in ₹) for the manufacturer.
Ans 1. 248

2. 247

3. 250

4. 249

Question ID : 441009151907
Option 1 ID : 441009602793
Option 2 ID : 441009602792
Option 3 ID : 441009602791
Option 4 ID : 441009602794
Status : Not Answered
Chosen Option : --

Q.14 A, B and C can complete a task individually in 20, 22 and 24 days, respectively. A and B start
working together, but A works for only the first 5 days, B works for all days, and C joins 5
days after the work starts and continues until the task is completed. How long will it take for
the task to be completed?
Ans 1. 10 days

2. 11 days

3. 9 days

4. 8 days

Question ID : 441009151366
Option 1 ID : 441009600667
Option 2 ID : 441009600668
Option 3 ID : 441009600666
Option 4 ID : 441009600665
Status : Answered
Chosen Option : 2
Q.15 If the volume of a cube is 1,728 m3, then find the lateral surface area of the cube in m2.

Ans 1. 580

2. 576

3. 586

4. 864

Question ID : 441009152049
Option 1 ID : 441009603360
Option 2 ID : 441009603359
Option 3 ID : 441009603361
Option 4 ID : 441009603362
Status : Not Answered
Chosen Option : --

Section : General Awareness

Q.1 Which of the following is NOT mentioned under Articles 39 to 51 of the Indian Constitution?
Ans 1. Secretariat of State Legislature

2. Organisation of village panchayats

3. Equal justice and free legal aid

4. Living wage, etc. for workers

Question ID : 44100943160
Option 1 ID : 441009172113
Option 2 ID : 441009172111
Option 3 ID : 441009172112
Option 4 ID : 441009172114
Status : Not Answered
Chosen Option : --

Q.2 Which of the following is a likely impact of trade liberalisation on domestic industries in a
developing country?
Ans 1. Reduced foreign competition

2. Increased government protection

3. Higher trade barriers

4. Increased competition from imports

Question ID : 44100953164
Option 1 ID : 441009211729
Option 2 ID : 441009211728
Option 3 ID : 441009211731
Option 4 ID : 441009211730
Status : Not Answered
Chosen Option : --
Q.3 In the Union Budget 2025-26, a new scheme for 5 lakh women, Scheduled Castes and
Scheduled Tribes first-time entrepreneurs will provide term loans up to _____ in the next five
years.
Ans 1. 5 crore

2. 3 crore

3. 2 crore

4. 4 crore

Question ID : 44100941382
Option 1 ID : 441009165079
Option 2 ID : 441009165077
Option 3 ID : 441009165076
Option 4 ID : 441009165078
Status : Not Answered
Chosen Option : --

Q.4 The 6th Edition of the Coordinated Patrol (CORPAT), which was conducted in March 2025, is a
bilateral exercise between India and _____.
Ans 1. Japan

2. Bangladesh

3. Russia

4. Indonesia

Question ID : 44100941440
Option 1 ID : 441009165301
Option 2 ID : 441009165300
Option 3 ID : 441009165302
Option 4 ID : 441009165303
Status : Not Answered
Chosen Option : --

Q.5 Which monomer units are linked to form nucleic acid polymer?
Ans 1. Nucleotides

2. Monosaccharides

3. Amino acids

4. Fatty acids

Question ID : 44100937310
Option 1 ID : 441009148822
Option 2 ID : 441009148821
Option 3 ID : 441009148820
Option 4 ID : 441009148823
Status : Not Answered
Chosen Option : --
Q.6 Who founded the Krishak Praja Party in 1937 and worked as the Chief
Minister of Bengal from 1938-43?
Ans 1. Sisir Kumar Ghosh
2. Pandit Motilal Nehru
3. Arbindo Ghosh
4. AK Fazlul Haq

Question ID : 44100939083
Option 1 ID : 441009155865
Option 2 ID : 441009155868
Option 3 ID : 441009155867
Option 4 ID : 441009155866
Status : Not Answered
Chosen Option : --

Q.7 Which of the following statements are correct regarding plantation farming in India?
Plantation farming involves the cultivation of a single crop over a large area.
It requires capital-intensive inputs and migrant labourers.
In India, tea in Assam and North Bengal and rubber in Karnataka are major plantation crops.
Ans 1. Only 1 and 3

2. Only 2 and 3

3. Only 1 and 2

4. 1, 2 and 3

Question ID : 44100939452
Option 1 ID : 441009157333
Option 2 ID : 441009157332
Option 3 ID : 441009157331
Option 4 ID : 441009157334
Status : Answered
Chosen Option : 4

Q.8 Which of the following options is INCORRECT about work and energy?
Ans 1. Both have the same dimensions.

2. Both have the same conversion law.

3. Both are vector quantities.

4. The SI unit of these is joule (J).

Question ID : 44100937815
Option 1 ID : 441009150849
Option 2 ID : 441009150848
Option 3 ID : 441009150851
Option 4 ID : 441009150850
Status : Answered
Chosen Option : 3
Q.9 During which Gupta ruler's period did the Chinese traveler Fa Hien visit India?
Ans 1. Ashoka

2. Chandragupta II (Vikramaditya)

3. Samudragupta

4. Chandragupta I

Question ID : 44100939049
Option 1 ID : 441009155731
Option 2 ID : 441009155732
Option 3 ID : 441009155730
Option 4 ID : 441009155733
Status : Not Answered
Chosen Option : --

Q.10 For contribution in which field was Smt. Kumudini Rajnikant Lakhia given a Padma Vibhushan
award for the year 2025?
Ans 1. Trade and Industry

2. Medicine

3. Art

4. Public Affairs

Question ID : 44100941407
Option 1 ID : 441009165173
Option 2 ID : 441009165175
Option 3 ID : 441009165172
Option 4 ID : 441009165174
Status : Not Answered
Chosen Option : --