Form 20546

(851)
Printed in U.S.A.

LIST
OF

PARTS

A\ACHINE No. 3lsv52

A TRADE-MARK O F

THE SINGER MANUFACTURING COMPANY

From the library of: Superior Sewing Machine & Supply LLC
 INSTRUCTIONS FOR OILING

To ensure easy running and prevent unnecessary wear of

the ports which are In movable contact, the machine requires
oiling and when in continuous use, "TYPE B" or "TYPE D" OIL,
sold only by Singer Sewing Machine Company, should be
applied at least twice each day to all oil holes marked
"OIL", as instructed in Form 20543.

"TYPE D" OIL Is stainless.

Copyright, U. S. A., 1951, by The Singer Manufacturing Company

All Rights Reserved for all Countries

From the library of: Superior Sewing Machine & Supply LLC
 INDEX
Page
Accessories 13

Driving Attachment 14

Fittings for Mobile Field Cabinet-Serial

No. 179264 16

Knee Lever 18

Machine No. 31SV52 7

Motor and Switch Parts 18

Numerical List of Parts 21

Starting Rock Shaft 19

From the library of: Superior Sewing Machine & Supply LLC
 INSTRUCTIONS FOR ORDERING

In ordering from khis list, use ONLY the part NUMBER in

the FIRST Column.

The number stamped on a Sewing Machine Part is in every

case the number of the single part only.
Every combination of parts sent out as such has its specific
number, which, although not stamped on the parts, must be used
when ordering the combination.
Each number always Indicates the SAME PART in whatever
list it appears, or for whatever machine.
The letters after some of the numbers indicate the style of
finish only, as follows:
A-Hardened, Polished, Nickel Plated and Buffed.
A.A-Buffed and Chromium Plated.
A.B-Hardened, Polished, Buffed and Chromium Plated.
A.C-Brown Baking Enamel Finish.
A.D-Gray Baking Enamel Finish.
A.E-Hardened, Bright Rumbled and Nickel Plated.
A.F-Hardened, Bright Rumbled, Nickel Plated, Bright Rumbled and
Chromium Plated.

A.G-Alumilite, Plain.
A.H-Alumilite Dyed.
A.J-Polished, Nickel Plated and Chromium Plated.
A.K-Hardened, Polished, Nickel Plated and Chromium Plated.
A.L-Heat Treated for Toughness.
B-Polished, Nickel Plated and Buffed.
C-Hardened only.
C.R-Mardened and Merlized.
D-Polished Only.
E-Soft, Not Polished,
F-Hardened and Polished.
F.J'Hardened, Polished and Nickel Plated.
G-Bright Rumbled and Nickel Plated.
H-Blued.
J-Nickel Plated Only.
K-Hardened and Nickel Plated.
L-Brass Plated,
M-Oxidized.
N-Japanned, Dull.

From the library of: Superior Sewing Machine & Supply LLC
 INSTRUCTIONS FOR ORDERING - Continued

P-Japanned, Bright.
P.P-Wrinkle Finish.

R-Merl Ized.

S-Cadm turn Plated.

T-Copper Plated.
T.A-Hardened, Polished, Copper and Nickel Plated and Buffed
T.B-Copper and Nickel Plated and Polished.
T.J-Copper and Nickel Plated Only.
T.K-Hardened, Copper and Nickel Plated.
T.L-Copper and Brass Plated.
T.M-Copper Plated and Oxidized. *
U-Zinc Plated.
V.Silver Plated.

W-Polished and Nickel Plated.

X-Black Oxide, for Iron and Steel.

X.C-Hardened and Black Oxide, for Iron and Steel.
Y-Black Nickel Plated Only.
Z-Chromlum Plated.

Z.A-Hardened, Polished, Nickel Plated, Buffed and Chromium Plated.

Z.B-Polished, Nickel Plated, Buffed and ChromIum Plated.
Z.C-Hardened and Chromium Plated.

Z.D-Polished and Chromium Plated.

Z.G-Brlght Rumbled, Nickel Plated, Bright Rumbled and Chromium

Plated.

Z.J-NIckel and Chromium Plated.

Z.T-Copper and Chromium Plated.

These letters MUST BE USED when they appear in the list;
and AFTER the number as in the list.
In this series:

I to 1500, 50001 to 51500 and 140001 to 142000 are

Screw Numbers.
1501 to 1800 and 51501 to 51800 are Nut Numbers.
1801 to 2000 and 51801 to 52000 are Roller Numbers.

2001 to 50000 and 52001 to 140000 and 142001 to 190000

are Sewing Machine Parts, 190001 and upward are numbers
of Electrical Parts.
The figures in the second column refer only to the plates,
illustrating the parts, and are NOT TO BE USED in ordering.
Parts marked with an asterisk (*) are furnished only when repairs
are made at factory.

From the library of: Superior Sewing Machine & Supply LLC
 SJNGER

From the library of: Superior Sewing Machine & Supply LLC
 LIST OF PARTS COMPLETE
FOR

MACHINE No.3lsv52
No. Plate Name
*20313 Arm with 15404 and two 15405
8582 24082 " Dowel Pin (2)
12453 24082 " Oil Tube for intermediate bear
ing
12454 24082 Arm Oil Tube with 132590^ for oiling
12409
11119 24082 Arm Oil Tube with 52045, for oiling
12408
24131 24082 Arm Oil Tube with 52045, for oiling
12197
132590 24082 Arm Oil Tube Packing (braided cot
ton)
52045 24082 Arm Oil Tube Packing (braided cot
ton)
748E 24082 Arm Screw (back) (2)
854E 24082 " (front) (2)
12427 24085 Shaft
*44124 " 12427 with 12197 and 20188
*44197 " 44124 with 20197
12357 24085 " Flanged Bushing (back)....
448AL 24085 " " " Set
Screw
144D 24085 Arm Shaft Screw
12480 24080 " Side Cap
219J 24080 " Screw
12193 24082 " " Cover
51224W 24082 " " " Thumb Screw
52239 24082 " Spool Pin and Thread Eyelet
8879 24082 " " " Washer (cloth)
16592 24085 Balance Wheel (friction) with 7958,
16524 and two 435AL
16524 24085 Balance Wheel (friction) Ring
(leather)
7958 24085 Balance Wheel (friction) Ring Stop
Pin
435AL 24085 Balance Wheel Set Screw (2)
»Serial 193963 Bed
5596 24080 Bell Crank
56848 " " 5596 with 5599 and 5601..
5599 24080 " " Bracket
178E 24080 Screw (2)
5601 24080 " " Hinge Pin
5735 24080 " " Spring
5598 24080 Bell Crank complete, Nos. 5735 and.,
56848 .

From the library of: Superior Sewing Machine & Supply LLC
 8
PARTS
P, FOR MACHINE No. 3isv52

No. Plate Name

256J 24085 Clamp Stop Motion Clamp Screw
248A 24085 " • " " " Stop Screw..
2020 24085 " " " " Washer
4933 24085 " " " Flanged Bushing
with two 462AL
462AL 24085 Clamp Stop Motion Flanged Bushing
Set Screw (2)
3022 24085 Clamp Stop Motion complete, Nos.
248A, 256J, 2020 and 4933
20197 24085 Crank Connecting Rod with 125044 and
two 896AL
896AL 24085 Crank Connecting Rod Cap Screw (2)..
90SC 24085 " Hinge Screw
1619E 24085 " " . " Nut
125044 " " " Oil Fad (felt).
20057 24079 Face Plate •
20058 Face Plate complete, Nos. 12150,
20057 and 139615
190J 24079 Face Plate Screw
44181 " " Thread Guard (lower)
II M II It II
12150 24079
44181 with 12152
12152 24079 Face Plate Thread Guard (lower) Riv
et
45874 Face Plate Thread Guard (upper)
II II ti 11 n
139615 24079
45874 With 125424
125424 24079 Face Plate Thread Guard (upper) Riv
et
51224W 24079 Face Plate Thumb Screw
12368 24080 Feed Bar
313C 24080 " " Screw Center (2)
56813 " " 313C with
1519J (2)
1519J 24080 Feed Bar Screw Center Nut (2)
12197 24085 " Cam and Feed Lifting Eccentric
with 446AL
446 AL 24085 Feed Cam and Feed Lifting Eccentric
Set Screw
52165 24085 Feed Connecting Link
375C 24085 " " " Hinge Screw (2)
1518J 24085 " " Nut
(2)
26603 24079 Feed Dog, 20 teeth (16 teeth to the
Inch)
208AL 24079 Feed Dog Screw (2)
44003 24085 " Forked Connection
375C 24085 " " " Hinge Screw..
II 11 II II It
1518J 24085
Nut
43992 Feed Forked Connection complete,
Nos. 12332, 44003, 52165 and two
each 375C and 1518J
44125 24080 Feed Lifting Rock Shaft
44126 24080 Feed Lifting Rock Shaft complete,
Nos. 12376 and 44125

From the library of: Superior Sewing Machine & Supply LLC
 PARTS FOR MACHINE No. 3lsv52

No. Plate Name

12376 24080 Feed Lifting Rock Shaft Crank with
157J and 1813
157J 24080 Feed Lifting Rock Shaft Crank Clamp
ing Screw
43976 24085 Feed Lifting Rock Shaft Crank Con
necting Rod with 125044 and two
966E
125044 Feed Lifting Rock Shaft Crank Con
necting Rod Oil Fad (felt)
966E 24085 Feed Lifting Rock Shaft Crank Con
necting Rod Cap Screw (2)
375C 24085 Feed Lifting Rock Shaft Crank Con
necting Rod Hinge Screw
1518J 24085 Feed Lifting Rock Shaft Crank Con
necting Rod Hinge Screw Nut
1813 24080 Feed Lifting Rock Shaft Crank Roller
and Stud
307C 24080 Feed Lifting Rock Shaft Screw Center
(2)
56814 Feed Lifting Rock Shaft Screw Center
307C with 1513J (2)
1513J 24080 Feed Lifting Rock Shaft Screw Center
Nut (2)
12332 24085 Feed Regulator and Reverser
140139E " " " " Hinge
Screw
139603 Feed Regulator and Reverser Hinge
Screw Washer
12333 24085 Feed Regulator Handle
12323 24085 " " " Friction
Spring
835D 24085 Feed Regulator Handle Screw
12379 24080 " Rock Shaft
20333 Feed Rock Shaft complete, Nos. 12379
and 29633
29633 24080 Feed Rock Shaft Crank with 157J
157J 24080 " " " " Clamping Screw
30 7C 24080 " " " Screw Center (2)....
56814 " " " " " 307C
with 1513J (2)
1513J 24080 Feed Rock Shaft Screw Center Nut (2)
25866 Guide
28 4W " Screw
12237 24080 Lifting Lever with 448AL
12415 24080 " " Connecting Rod
12416 24080 " " " " Joint..
II II II II II
76D 24080
Hinge Screw
1521J 24080 Lifting Lever Connecting Rod Lock
Nut
802D 24080 Lifting Lever Hinge Screw
12241 24081 " Link
765D 24081 " " Hinge Screw
12240 24080 Pin
448AL 24080 " " Set Screw
12381 24081 Needle Bar (hollow)

From the library of: Superior Sewing Machine & Supply LLC
 10 PARTS FOR A\ACHINE No. 3lsv52

No. Plate Name

43997 24081 Needle Bar Connecting Link with 794E
and 12384
794E 24081 Needle Bar Connecting Link Adjusting
Screw
12384 24081 Needle Bar Connecting Stud with
453AL and 1904
1904 24081 Needle Bar Connecting Stud Roller
(roller only)
453AL 24081 Needle Bar Connecting Stud Set Screw
20188 24085 " " Crank with 858AL and
1065AL
1065AL 24085 Needle Bar Crank Position Screw
858AL 24085 " " " Set Screw
936E 24081 " " Screw Bushing (2)
4302 24081 " " Thread Guard
233D 24081 " " " " Screw
4303 24081 " Clamp with 808F
808F 24081 " " Screw
24104 Oscillating Rock Shaft
24105 24085 Oscillating Rock Shaft complete,
Nos. 4784, 12388 and 24104
139602 Oscillating Rock Shaft 24105 with
908C
12388 24085 Oscillating Rock Shaft Hinge Pin....
448AL 24085 " " " " " Set
Screw
4784 24085 Oscillating Rock Shaft Oil Pad
12389 24080 " Shaft
44134 24080 " " Crank
44135 24080 Oscillating Shaft Crank complete,
Nos. 1518E, 19449, 44134 and two
453AL
453AL 24080 Oscillating Shaft Crank Set Screw
(2)
19448 24080 Oscillating Shaft Crank Slide Block.
II II If II 11
226J 24080
Cap Screw
12424 24080 Oscillating Shaft Cremk Slide Block
Cap Screw Washer
988C 24080 Oscillating Shaft Crank Slide Block
Screw Stud
1518E 24080 Oscillating Shaft Crank Slide Block
Screw Stud Nut
19449 Oscillating Shaft Crank Slide Block
complete, Nos. 226J, 988C, 12424
and 19448
12391 24081 Presser Bar (hollow)
20059 24081 " Guide Bracket with 453AL
453AL 24081 " " " Set Screw.
52016 24081 " Lifter
689C 24081 " " Screw
1520J 24081 " " " Nut
12327 24081 " Lifting and Releasing
Lever Bracket
11167 24081 Presser Bar Spring (light) .051 wire
Note: No. 11167 Is sent with this machine
unless Another Presser Bar Spring Is
specified on order.

From the library of: Superior Sewing Machine & Supply LLC
 PARTS FOR A\ACHINE No. 3lsv52 11

No. Plate Name

12139 Presser Bar Spring (medium) .055
wire
20023 Presser Bar Spring (heavy) .063 wire
11170 24081 " " " Washer
7298 24081 " Foot Hinge Pin
19334 24081 " " Plate
19335 24081 " " Shank
19336 24081 Presser Foot (hinged) complete, Nos.
7298, 19334 and 19335
190J 24081 Presser Foot Screw
688J 24081 Pressure Regulating Thumb Screw
2996 24081 Shuttle Bobbin
15140 24081 " " Case Latch
2973 24081 " " " " Lever
2974 24081 " Ful
crum Pin
2975 24081 Shuttle Bobbin Case Latch Spring....
592E 24081 " " " " Stop Screw
15141 Shuttle Bobbin Case Hinge, Nos.
2973, 2974 and 15140
24412 24082 Shuttle Bobbin Case Position Plate..
391J " II II 11 If
24082
Screw (2)
62740 24081 Shuttle Bobbin Case complete, Nos.
591F, 592E, 2975, 15141 and
15278
12393 24081 Shuttle Body
591F 24081 " Tension Regulating Screw
15278 24081 " " Spring
19292 24081 Shuttle, 1 11/16 in. dlam., Nos.
2996, 12393 and 62740
12394 Shuttle Driver
12444 24080 " " 12394 with two 1266AL
1266AL 24080 " " Set Screw (2)
2531 24082 " Race Back
2532 24082 " " " Position Pin (2)..
2533 24082 " " " Spring
907D 24082 " " " " Screw
24413 24082 " " Body
25000 " " " 24413 with 24414
and two 1053E
24962 Shuttle Race Body 25000 with two
2532
24414 24082 Shuttle Race Cap
1053E 24082 " " " Screw (2)
24415 24082 Shuttle Race complete, Nos. 907D,
2531, 2533, 24412, 24962 and two
391J
145D 24082 Shuttle Race Screw (2)
12431 24079 " " Slide
12432 24079 Shuttle Race Slide complete, Nos.
4307, 12431 and two 725J
4307 24079 Shuttle Race Slide Spring
725J 24079 " Screw (2).
20060 24081 Slack Thread Regulator
225F 24081 " " " Adjusting
Sc rew

From the library of: Superior Sewing Machine & Supply LLC
 12 PARTS FOR /AACHINE No. 3lsv52

No. Plate Name

2102 24079 Tension Disc (2)
1560C 24079 Regulating Thumb Nut
32572 24079 Releasing Disc
43944 24079 " Lever
12398 24079 " " Hinge Pin...
12329 24079 " " Spring
32574 24079 " Pin
50327C 24079 Screw Stud
44141 " " 50327C with 1560C
43945 24079 Spring
44118 24079 Tension complete, Nos. 7336, 32572,
32574, 43945, 43946, 44141 and
two 2102
52454 24079 Thread Retainer
624AL 24079 " Set Screw
12404 24081 Take-up Crank
3094 24085 " " VJedge
690E 24085 " " " Screw....
12408 24081 " Lever
775E 24081 " " Cap Screw
12166 24081 " " Hinge Pin
12409 24081 " " Link
11204 24081 " " " Hinge Pin.
II II II II II
435AL 24081
Set Screw
12410 Thread Take-up Lever complete, Nos.
12166, 12408 and 12409
43946 24079 Thread Take-up Spring
7336 24079 " " " Regulator....,
II II II 11 3g^.
448AL 24079
Screw
43990 Thread Take-up complete, Nos. 775E,
11204, 12404, 12410 and 43997..
26605XC 24079 Throat Plate
691XC 24079 " " Screw (2)
. *15404 Trade Mark
15405 " " Rivet (2)
Serial 179326 Drip Pan with two 27878
27878 " " Nail (2)

From the library of: Superior Sewing Machine & Supply LLC
 13

ACCESSORIES

No. Plate Neune

25020 Belt (round, 1/4 in.) 6 ft. long...
Serial 179808 " (round, 1/4 in.) 28 in. long
with 25127
Note: Belt Serial 179808 is furnished only
with Motor.
25127 24083 Belt Hook (6)
120616 24083 " Punch
12361 24083 Machine Hinge Connection (2)
120861 24083 Oil Can, 3 oz. filled with oil
11831 24083 Screw Driver (extra large)
26026 24083 " " (medium)
26485 24083 " (small)
120440 24083 " " (large)
8908 24083 Wrench for 1519 and 1520
8909 24083 " " 1513 and 1518
22003 24083 Wrench
27662 24083 Wrench
40552 24083 Wrench

From the library of: Superior Sewing Machine & Supply LLC
 14

DRIVING ATTACHMENT

No. Plate N£une

16592 24085 Balance V/heel (friction) with 7958,
16524 and two 435AL
16524 24085 Balance Wheel (friction) Ring
(leather)
7958 24085 Balance Wheel (friction) Ring Stop
Pin
435AL 24085 Balance Wheel Set Screw (2)
16514 24084 Bobbin Winder Frame
32D 24084 " " " Hinge Screw
16515 Bobbin Winder Frame complete, Nos.
333J, 5960, 5961, 5963, 15077
and 16514
5960 24084 Bobbin Winder Friction Wheel (leath
er)
5961 24084 Bobbin Winder Friction Wheel Washer.
II II 11 II II
333J 24084
Screw
15072 24084 Bobbin Winder Position Pin
15077 24084 " " Spindle with 15072
5963 24084 " " " Flange
27306 24084 " " Spool Pin
27307 24084 " " " Stand
27308 24084 Bobbin Winder Spool Stand complete,
Nos. 418E, 1562J, 2106, 10141,
11241, 27306, 27307 and two each
2455 and wood screws 1 in. No.
10 F.H.
11241 24084 Bobbin Winder Spool Washer (cloth)
12170 24084 " " Spring
180J 24084 " " " Screw
16516 24084 " " 'Stop Latch with 152E
and 1550X
152E 24084 Bobbin Winder Stop Latch Adjusting
Screw
1550X 24084 Bobbin Winder Stop Latch Adjusting
Screw Nut
75D 24084 Bobbin Winder Stop Latch Hinge Screw
27303 " " " " Spring
2269 " " " " Stop Pin..
2455 24084 " " Tension Disc (2)
1562J 24084 " " " Regulating
Thumb Nut
418E 24084 Bobbin Winder Tension Screw Stud...
10141 24084 " " " Spring
2106 24084 " " " Thread Guard.
16530 24084 Bracket
692D 24084 " Screw
16518 24084 Driving Arm with 2269, 2928 and two
15132
2928 24084 Driving Arm Brake (leather)
15132 24084 " " " Rivet (2)

From the library of: Superior Sewing Machine & Supply LLC
 15

No. Plate N£une

12178 24084 Driving Arm Friction Plug (wood)....
42 7E 24084 " " " " Adjusting
Screw
1508C 24084 Driving Arm Friction Plug Adjusting
Screw Nut
693D 24084 Driving Arm Hinge Screw
1579C 24084 " Nut
12475 24084 " " Pitman
20371 24084 " " " Crank
2022 24084 " " " " Pin
20372 24084 " " " " Spring
65D 24084 " " " Hinge Screw (2)..
16522 24084 Driving Arm complete, Nos. 32D, 75D,
180J, 427E, 693D, 1508C, 15790,
12170, 12178, 16515, 16516,
16518, 16530 and 27303
16594 24084 Driving Friction Pulley, 2 5/16 in.
diam. with 861E and 10236
10236 Driving Friction Pulley Center Bear
ing
86 IE 24084 Driving Friction Pulley Oil Hole
Plug Screw
12479 24084 Starting Crank
2022 24084 " " Pin
12477 24084 " " Shaft
44176 24084 " " " 12477 with
12479, 20371 and two 2022
Serial 179362 24084 Driving Attachment with Bobbin Wind
er Nos. 692D, 12475, 16522,
16592, 16594, 20372, 27308,
44176 and two 65D

From the library of: Superior Sewing Machine & Supply LLC
 16

FITTINeS FOR MOBILE FIELD

CABINET — SERIAL No. 179264
No. Plate Name
Serial 179301 Base (wood) base only
Serial 179302 Base complete, Nos. 190566, Serial
179301, Serial 179303, Serial
179323, Serial 179324, Serial
179325, Serial 179458, two each
2718, 44139, 126849, Serial
179319, wood screws 3/4 In. No.
6 F.H., 1 1/4 In. No. 14 F.H.,
four each 20022, 27878, Serial
179304, Serial 179313 (component
part of Serial 179314) wood
screws 3/8 In. No. 5 R.H.
Blacked, six 96788, eight wood
screws 3/4 In. No. 7 F.H. and
sixteen each 23250, 67425, Seri
al 179315 and wood screws 1 1/2
In. No. 12 F.H
Serial 179303 Base Accessory Compartment Lid
(wood)
126849 Base Accessory Compartment Lid Hinge
with four wood screws 3/4 In.
No. 7 (2)
Base Accessory Compartment Lid Hinge
Wood Screw 3/4 In. No. 7 F.H.
(8)
96788 Base Corner Brace (6)
" " " Wood Screw 3/4 In.
No. 9 R.H. Blacked (24)
Serial 179304 Base Protecting Strip (4)
" " " Wood Screw 1/2
In. No. 12 F.H. (16)
Serial 179305 Cover (wood).cover only
Serial 179306 Cover complete, Nos. Serial 179305,
Serial 179320, Serial 179321,
two Serial 179312, four each
9281, 126079, Serial 30797, Se
rial 179317 (component part of
Serial 179314) Serial 179322,
sixteen each 23250, 67425, Seri
al 179315 and twenty-four wood
screws 1 1/2 In. No. 12 F.H
Serial 179307 Cover Handle (rubber) (2)
Serial 179308 " " Chain (2)
27684 " " " Hook (4)
Serial 179309 Cover Handle, Nos. Serial 179307,
Serial 179308 and two 27684 (2)-
Serial 179310 Cover Handle Eye Bolt with Serial
179311 (4)
Serial 179311 Cover Handle Eye Bolt Nut (4)
126079 " " " " " Lock Wash
er (4)

From the library of: Superior Sewing Machine & Supply LLC
 17

No. Plate Name

9281 Cover Handle Eye Bolt Nut Washer (4)
Serial 30797 " Washer (4)....
Serial 179312 Cover Handle with Eye Bolts com
plete, Nos. Serial 179309 and
two Serial 179310 (2)
Serial 179313 Cover Hasp (4)
Serial 179314 Cover Hasp complete with Staple,
Nos. Serial 179313 and Serial
179317 (4)
Serial 179315 Cover Hasp Bolt with Serial 179316
(16)
Serial 179316 Cover Hasp Bolt Nut (16)
67425 " " " " Lock Washer (16)
23250 " "
Washer (16)
Serial 179317 " " Staple (4)
Serial 179315 " " " Bolt with Serial
179316 (16)
Serial 179316 Cover Hasp Staple Bolt Nut (16)
67425 " " Lock
Washer (16)
23250 Cover Hasp Staple Bolt Nut Washer
(16)
Serial 30821 Cover Hasp Staple Snap (4)
Serial 179313 " " " " Chain with
two 124352 (2)
Serial 179319 Cover Hasp Staple Snap Chain with
Snaps complete, Nos. Serial
179318 and two Serial 30821 (2).
124352 Cover Hasp Staple Snap Chain Hook
(4)
Cover Hasp Staple Snap Chain Wood
Screw 3/4 in. No. 6 F.H. (2)
Serial 179320 Cover Machine Protector Pad (felt)
left
Serial 179321 Cover Machine Protector Pad (felt)
right
Serial 179322 Cover Protecting Strip (4)
" " " Wood Screw
1 1/2 in. No. 12 F.H. (24)
Serial 179323 Knee Lever Holder (left)
Serial 179324 " (right)
" " " V/ood Screw 3/8 in.
No. 5 R.H. Blacked (4)
190566 Lead Clamp
" " Wood Screw 3/4 in. No. 9
R.H. Blacked
Serial 179325 Machine Button
Serial 179458 " Bolt with 1690R
1690R " Nut
2718 " Washer (2)
44139 Hinge Plate (2)
" " Wood Screw 1 1/4
in. No. 14 F.H. (?)
20022 Machine Rest (felt) (4)
27878 " " Rivet (4)
Serial 179264 Mobile Field Cabinet complete, Nos.
Serial 179302 and Serial 179306.

From the library of: Superior Sewing Machine & Supply LLC
 18

KNEE LEVER

No. Plate Name

Serial 179756 Knee Lever
Serial 179757 " " Engaging Head
25352 " " Positioning Ball
Serial 179759 " " " " Spring..
Serial 179758 Knee Lever, Nos. 25362, Serial
179756, Serial 179757 and Serial
179759
2767 Knee Lever Knee Plate with 356C
356C " " " " Set Screw
Serial 179760 Knee Lever complete, Nos. 2767 and
Serial 179758

MOTOR AND SWITCH PARTS

No. Plate Name
797307 ----- Switch Box with Switch complete—.
Serial 48033 Cord (10 ft. long) from Switch Box
to Motor
792853 Cord complete (to socket)
Motor, ZA 143 (Counterclockwise)..
Serial 180050 " Bolt with 1778R (4)
Serial 179761 Motor Bolt complete, Nos. 1778R,
126150, Serial 180050 and two
9842 (4)
1778R Motor Bolt Nut (4)
1778R " " " Lock Nut (4)
126150 " " " " Washer (4)
9842 " Washer (8)
741946 " Pulley (grooved) 2 1/4 in.
diam., 1/2 in. bore with two
50788AL
50788AL Motor Pulley Set Screw (2)

STARTING ROCK SHAFT

No. Plate Neune

Serial 179327 Knee Lever Socket
Serial 179328 Starting Rock Shaft
Serial 179329 " " " Serial 179328
with Serial 179327 and Serial
179769

From the library of: Superior Sewing Machine & Supply LLC
 19

No. Plate Name

Serial 179769 Starting Rock Shaft Insert
Serial 179330 " " " Ohaln with 39575
39575 " Hook
7539 " " " Hanger (back)
with two wood screws 1 In. No.
10 F.H
20093 Starting Rock Shaft Hanger (front)
with two wood screws 1 In. No.
10 F.H
6338 Starting Rock Shaft Hook
6337 " " " " Bracket
with two 3560
3560 Starting Rock Shaft Hook Bracket Set
Screw
3560 Starting Rock Shaft Hook Set Screw..
2770 " " " Stop Dog with
1402190 (2)
1402190 Starting Rock Shaft Stop Dog Set
Screw (2)
Serial 179331 Starting Rock Shaft complete, Nos.
6337, 6338, 7539, 20093, Serial
179329, Serial 179330 and two
2770

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL

LIST

OF PARTS

From the library of: Superior Sewing Machine & Supply LLC
 21

NUMERICAL LIST OF PARTS

No. Plate Name
32D 24084 Bobbin Winder Frame Hinge Screw for
16522
65D 24084 Driving Attachment Driving Arm Pit
man Hinge Screw for Serial
179362 (2)
75D 24084 Bobbin Winder Stop Latch Hinge Screw
for 16522
76D 24080 Lifting Lever Connecting Rod Joint
Hinge Screw
144D 24085 Arm Shaft Screw •
145D 24082 Shuttle Race Screw (2)
152E 24084 Bobbin Winder Stop Latch Adjusting
Screw for 16516
157J 24080 Feed Lifting Rock Shaft Crank Clamp
ing Screw for 12376
157J 24080 Feed Rock Shaft Crank Clamping Screw
for 29633
178E 24080 Bell Crank Bracket Screw (2)
180J 24084 Bobbin Winder Spring Screw for 16522
190J 24079 Face Plate Screw
190J 24081 Presser Foot Screw
208AL 24079 Feed Dog Screw (2)
219J 24080 Am Side Cap Screw
225F 24081 Slack Thread Regulator Adjusting
Screw
226J 24080 Oscillating Shaft Crank Slide Block
Cap Screw for 19449
233D 24081 Needle Bar Thread Guard Screw
248A 24085 Clamp Stop Motion Clamp Stop Screw
for 3022
256J 24085 Clamp Stop Motion Clamp Screw for
3022
284W Guide Screw
307C 24080 Feed Lifting Rock Shaft Screw Center
for 56814 (2)
307C 24080 Feed Rock Shaft Screw Center for
56814 (2)
313C 24080 Feed Bar Screw Center for 56813 (2).
333J 24084 Bobbin Winder Friction Wheel Washer
Screw for 16515
356C Knee Lever Knee Plate Set Screw for
2767
356C Starting Rock Shaft Hook Bracket Set
Screw for 6337
356C Starting Rock Shaft Hook Set Screw
for 6337
375C 24085 Feed Connecting Link Hinge Screw for
43992 (2)
375C 24085 Feed Forked Connection Hinge Screw..
375C 24085 Feed Lifting Rock Shaft Crank Con
necting Rod Hinge Screw
391J 24082 Shuttle Bobbin Case Position Plate
Screw for 24415 (2)

From the library of: Superior Sewing Machine & Supply LLC
 22 NUMERICAL LIST OF PARTS

No. Plate Name

418E 24084 Bobbin Winder Tension Screw Stud for
27308
427E 24084 Driving Attachment Driving Arm Fric
tion Plug Adjusting Screw for
16522
435AL 24085 Balance Wheel Set Screw for 16592
(2)
435AL 24085 Driving Attachment Balance Wheel Set
Screw for 16592 (2)
435AL 24081 Thread Take-up Lever Link Hinge Pin
Set Screw
446AL 24085 Feed Cam and Feed Lifting Eccentric
Set Screw for 12197
448AL 24085 Arm Shaft Flanged Bushing (back) Set
Screw
448AL 24080 Lifting Lever Pin Set Screw
448AL 24085 Oscillating Rock Shaft Hinge Pin Set
Screw
448AL 24079 Thread Take-up Spring Regulator Set
Screw
453AL 24081 Needle Bar Connecting Stud Set Screw
for 12384
453AL 24080 Oscillating Shaft Crank Set Screw
for 44135 (2)
453AL 24081 Presser Bar Guide Bracket Set Screw
for 20059
462AL 24085 Clamp Stop Motion Fleinged Bushing
Set Screw for 4933 (2)
591F 24081 Shuttle Tension Regulating Screw for
62740
592E 24081 Shuttle Bobbin Case Latch Stop Screw
for 62740
624AL 24079 Thread Retainer Set Screw
688J 24081 Pressure Regulating Thumb Screw
689C 24081 Presser Bar Lifter Screw.
690E 24085 Thread Take-up Crank Wedge Screw....
691XC 24079 Throat Plate Screw (2)
692D 24084 Driving Attachment Bracket Screw for
Serial 179362
693D 24084 Driving Attachment Driving Arm Hinge
Screw for 16522
725J 24079 Shuttle Race Slide Spring Screw for
12432 (2)
748E 24082 Arm Screw (back) (2)
766D 24081 Lifting Lever Link Hinge Screw
775E 24081 Thread Take-up Lever Cap Screw for
43990
794E 24081 Needle Bar Connecting Link Adjusting
Screw for 43992
802D 24080 Lifting Lever Hinge Screw
808F 24081 Needle Clamp Screw for 4303
835D 24085 Feed Regulator Handle Screw
854E 24082 Arm Screw (front) (2)
858AL 24085 Needle Bar Crank Set Screw for 20188
861E 24084 Driving Attachment Driving Friction
Pulley Oil Hole Plug Screw for
16594

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL LIST OF PARTS 23

No. Plate Name

896AL 24085 Crank Connecting Rod Cap Screw for
20197 (2)
907D 24082 Shuttle Race Back Spring Screw for
24415
908C 24085 Crank Connecting Rod Hinge Screw for
139602
936B 24081 Needle Bar Screw Bushing (2)
966E 24085 Peed Lifting Rock Shaft Crank Con
necting Rod Cap Screw for 43976
(2) •
988C 24080 Oscillating Shaft Crank Slide Block
Screw Stud for 19449
1053E 24082 Shuttle Race Cap Screw for 25000 (2)
1065AL 24085 Needle Bar Crank Position Screw for
20188
1266AL 24080 Shuttle Driver Set Screw for 12444
(2)
1508C 24084 Driving Attachment Driving Arm Fric
tion Plug Adjusting Screw Nut
for 16522
1513J 24080 Peed Lifting Rock Shaft Screw Center
Nut for 56814 (2)
1513J 24080 Peed Rock Shaft Screw Center Nut for
56814 (2)
1518J 24085 Peed Connecting Link Hinge Screw Nut
for 43992 (2)
1518J 24085 Peed Forked Connection Hinge Screw
Nut
1518J 24085 Peed Lifting Rock Shaft Crank Con
necting Rod Hinge Screw Nut
1518E 24080 Oscillating Shaft Crank Slide Block
Screw Stud Nut for 44135
1519J 24080 Peed Bar Screw Center Nut for 56813
(2)
1520J 24081 Presser Bar Lifter Screw Nut
1521J 24080 Lifting Lever Connecting Rod Lock
Nut
1550X 24084 Bobbin Winder Stop Latch Adjusting
Screw Nut for 16516
1560C 24079 Tension Regulating Th\imb Nut for
44141
1562J 24084 Bobbin Winder Tension Regulating
Thumb Nut for 27308
1579C 24084 Driving Attachment Driving Arm Hinge
Screw Nut for 16522
1619E 24085 Crank Connecting Rod Hinge Screw Nut
1690R Mobile Field Cabinet Machine Button
Bolt Nut for Serial 179458
1778R Motor Bolt Lock Nut for Serial
179761 (4)
1778R _
Motor Bolt Nut for Serial 180050 (4)
1813 24080 Peed Lifting Rock Shaft Crank Roller
and Stud for 12376
1904 24081 Needle Bar Connecting Stud Roller
(roller only) for 12384
2020 24085 Clamp Stop Motion Clamp Washer for
3022

From the library of: Superior Sewing Machine & Supply LLC
 24 NUMERICAL LIST OF PARTS

No. Plate Name

2022 24084 Di»lvlng Attachment Driving Arm Pit
man Crank Pin for 44176
2022 24084 Driving Attachment Starting Crank
Pin for 44176
2102 24079 Tension Disc for 44118 (2)
2106 24084 Bobbin Winder Tension Thread Guard
for 27308
2269 Bobbin Winder Stop Latch Stop Pin
for 16518
2455 24084 Bobbin Winder Tension Disc for 27308
(2)
2531 24082 Shuttle Race Back for 24415
2532 24082 " " " Position Pin for
24962 (2)
2533 24082 Shuttle Race Back Spring for 24415..
2718 Mobile Field Cabinet Machine Button
Washer for Seridl 179302 (2)
2767 Knee Lever Knee Plate with 356C, for
Serial 179760
2770 Starting Rock Shaft Stop Dog with
140219C, for Serial 179331 (2),.
2928 24084 Driving Attachment Driving Arm Brake
(leather) for 16518
2973 24081 Shuttle Bobbin Case Latch Lever for
15141
2974 24081 Shuttle Bobbin Case Latch Lever Ful
crum Pin for 15141
2975 24081 Shuttle Bobbin Case Latch Spring for
62740
2996 24081 Shuttle Bobbin for 19292
3022 24085 Clamp Stop Motion complete, Nos.
248A, 256J, 2020 and 4933
3094 24035 Thread Take-up Crank Wedge
4302 24081 Needle Bar Thread Guard
4303 24081 Needle Clamp with 808F
4307 24079 Shuttle Race Slide Spring for 12432.
4784 24085 Oscillating Rock Shaft Oil Pad for
24105
4933 24085 Clamp Stop Motion Flanged Bushing
with two 462AL, for 3022
5596 24080 Bell Crank for 56848
5598 24080 Bell Crank complete, Nos. 5735 and
56848
5599 24080 Bell Crank Bracket for 56848
5601 24080 " " Hinge Pin for 56848
5735 24080 " " Spring for 5598
5960 24084 Bobbin Winder Friction Wheel
(leather) for 16515
5961 24084 Bobbin Winder Friction Wheel Washer
for 16515
5963 24084 Bobbin Winder Spindle Flange for
16515
6337 Starting Rock Shaft Hook Bracket
with two 356C, for Serial 179331
6338 Starting Rock Shaft Hook for Serial
179331

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL LIST OF PARTS 25

No. Plate Name

7298 24081 Presser Foot Hinge Pin for 19336....
7336 24079 Thread Take-up Spring Regulator for
44118
7539 Starting Rock Shaft Hanger (back)
with two wood screws 1 in. No.
10 F.H., for Serial 179331
7958 24085 Balance Wheel (friction) Ring Stop
Pin for 16592
7958 24085 Driving Attachment Balance Wheel
(friction) Ring Stop Pin for
16592
8582 24082 Arm Dowel Pin (2)
8879 24082 " Spool Pin Washer (cloth)
8908 24083 Wrench for 1519 and 1520 (Accesso
ries)
8909 24083 Wrench for 1513 and 1518 (Accesso
ries)
9281 Mobile Field Cabinet Cover Handle
Eye Bolt Nut Washer for Serial
179306 (4)
9842 Motor Bolt Nut Washer for Serial
179761 (4)
10141 24084 Bobbin Winder Tension Spring for
27308
10236 Driving Attachment Driving Friction
Pulley Center Bearing for 16594.
11119 24082 Arm Oil Tube with 52045, for oiling
12408
11167 24081 Presser Bar Spring (light) .051 wire
Note: No. 11167 is sent with this machine
unless another Presser Bar Spring is
specified on order.
11170 24081 Presser Bar Spring Washer
11204 24081 Thread Take-up Lever Link Hinge Pin
for 43990
11241 24084 Bobbin Winder Spool Pin Washer
(cloth) for 27308
11831 24083 Screw Driver (extra large) Accesso-
.ries
12139 Presser Bar Spring (medium) .055
wire
12150 24079 Face Plate Thread Guard (lower)
44181 with 12152, for 20058
12152 24079 Pace Plate Thread Guard (lower)
Rivet for 12150
12166 24081 Thread Take-up Lever Hinge Pin for
12410
12170 24084 Bobbin Winder Spring for 16522
12178 24084 Driving Attachment Driving Arm Fric
tion Plug (wood) for 16522
12193 24082 Arm Side Cover
12197 24085 Feed Cam and Feed Lifting Eccentric
with 446AL, for 44124
12237 24080 Lifting Lever with 448AL
12240 24080 " Pin
12241 24081 " Link

From the library of: Superior Sewing Machine & Supply LLC
 26 NUMERICAL LIST OF PARTS

No. Plate Name

12323 24085 Feed Regulator Handle Friction
Spring
12327 24081 Fresser Bar Lifting and Releasing
Lever Bracket
12329 24079 Tension Releasing Lever Spring
12332 24085 Feed Regulator and Reverser for
43992
12333 24085 Feed Regulator Handle
12357 24085 Am Shaft Flanged Bushing (hack)....
12361 24083 Machine Hinge Connection Accesso
ries) (2)
12368 24080 Feed Bar.
12376 24080 Feed Lifting Rock Shaft Crank with
157J and 1813, for 44126
12379 24080 Feed Rock Shaft for 20333
12381 24081 Needle Bar (hollow)
12384 24081 Needle Bar Connecting Stud with
453AL and 1904, for 43997
12388 24085 Oscillating Rock Shaft Hinge Pin for
24105
12389 24080 Oscillating Shaft
12391 24081 Fresser Bar (hollow)
12393 24081 Shuttle Body for 19292
12394 " Driver for 12444
12398 24079 Tension Releasing Lever Hinge Pin...
12404 24081 Thread Take-up Crank for 43990
12408 24081 " " Lever for 12410
12409 24081 11 ti n ^2410.
12410 Thread Take-up Lever complete, for
43990, Nos. 12166, 12408 and
12409
12415 24080 Lifting Lever Connecting Rod
12416 24080 " " " " Joint..
12424 24080 Oscillating Shaft Crank Slide Block
Cap Screw Washer for 19449
12427 24085 Am Shaft for 44124
12431 24079 Shuttle Race Slide for 12432
12432 24079 Shuttle Race Slide complete, Nos.
4307, 12431 and two 725J
12444 24080 Shuttle Driver 12394 with two 1266AL
12453 24082 Am Oil Tube for Intermediate bear
ing ,
12454 24082 Am Oil Tube with 132590, for oiling
12409
12475 24084 Driving Attachment Driving Am Pit
man for Serial 179362
12477 24084 Driving Attachment Starting Crank
Shaft for 44176
12479 24084 Driving Attachment Starting Crank
for 44176
12480 24080 Am Side Cap
15072 24084 Bobbin Winder Position Pin for 15077
15077 24084 " " Spindle with 15072,
for 16515
15132 24084 Driving Attachment Driving Am Brake
Rivet for 16518 (2) .'

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL LIST OF PARTS 27

No. Plate Name

15140 24081 Shuttle Bobbin Case Latch- for 15141.
15141 « " " Hinge, for
62740, Nob. 2973, 2974 and 15140
15278 24081 Shuttle Tension Spring for 62740....
*15404 Trade Mark for 20313
15405 " " Rivet for 20313 (2)
16514 24084 Bobbin Winder Frame for 16515
16515 Bobbin Winder Fi>aine complete, for
16522, Nos. 333J, 5960, 5961,
5963, 15077 and 16514
16516 24084 Bobbin Winder Stop Latch with 152E
and 1550X, for 16522
16518 24084 Driving Attachment Driving Arm with
2269, 2928 and two 15132, for
16522
16522 24084 Driving Attachment Driving Arm com
plete, for Serial 179362, Nob.
32D, 75D, 180J, 427E, 693D,
1508C, 1579C, 12170, 12178,
16515, 16516, 16518, 16530 and
27303
16524 24085 Balance Wheel (friction) Ring
(leather) for 16592
16524 24085 Driving Attachment Balance Wheel
(friction) Ring (leather) for
16592
16530 24084 Driving Attachment Bracket for 16522
16592 24085 Balance Wheel (friction) with 7958,
16524 and two 435AL
16592 24085 Driving Attachment Balance Wheel
(friction) with 7958, 16524 and
two 435AL, for Serial 179362....
16594 24084 Driving Attachment Driving Friction
Pulley, 2 5/16 In. dlam. with
861E and 10236, for Serial
179362
19292 24081 Shuttle, 1 11/16 In. dlam., Nos.
2996, 12393 and 62740
19334 24081 Presser Foot Plate for 19336
19335 24081 " " Shank for 19336
19336 24081 Presser Foot (hinged) complete, Nos.
7298, 19334 and 19335
19448 24080 Oscillating Shaft Crank Slide Block
for 19449
19449 Oscillating Shaft Crank Slide Block
complete, for 44135, Nos. 226J,
988C, 12424 and 19448
20022 Mobile Field Cabinet Machine Rest
(felt) for Ser. 179302 (4).
20023 Presser Bar Spring (heavy) .063 wire
20057 24079 Face Plate for 20058
20058 Face Plate complete, Nos. 12150,
20057 and 139615
20059 24081 Presser Bar Oulde Bracket with 453AL
20060 24081 Slack Thread Regulator
20093 Starting Rock Shaft Hanger (front)
with two wood screws 1 In. No.
10 F.H., for Serial 179331

From the library of: Superior Sewing Machine & Supply LLC
 28 NUMERICAL LIST OF PARTS

No. Plate Name

20188 24085 Needle Bar Crank with 858AL and
1065AL, for 44124
20197 24085 Crank Connecting Rod with 125044 and
two 896AL, for 44197
'20313 Arm with 15404 and two 15405
20333 Peed Rock Shaft complete, Nos. 12379
and 29633
20371 24084 Driving Attachment Driving Arm Pit
man Crank for 44176
20372 24084 Driving Attachment Driving Arm Pit
man Crank Spring for Serial
179362
22003 24083 Wrench (Accessories)
23250 Mobile Field Cabinet Cover Hasp Bolt
Nut Washer for Serial 179302
(16)
23250 Mdblle Field Cabinet Cover Hasp
Staple Bolt Nut Washer for
Serial 179306 (l6)
24104 Oscillating Rock Shaft for 24105....
24105 24085 Oscillating Rock Shaft complete, for
139602, Nos. 4784, 12388 and
24104
24131 24082 Arm Oil Tube with 52045, for oiling
12197
24412 24082 Shuttle Bobbin Case Position Plate
for 24415
24413 • 24082 Shuttle Race Body for 25000
24414 24082 " " Cap for 25000
24415 24082 Shuttle Race complete, Nos. 907D,
2531, 2533, 24412, 24962 and
two 39IJ
24962 Shuttle Race Body 25000 with two
2532, for 24415
25000 Shuttle Race Body 24413 with 24414
and two 1053E, for 24962
25020 Belt (round, 1/4 In.) 6 ft. long
(Accessories)
25127 24083 Belt Hook for Serial 179808 (Acces
sories) (6)
25362 Knee Lever Positioning Ball for
Serial 179758
25866 Guide
26026 24083 Screw Driver (medlvun) Accessories...
26485 24083 " " (small) Accessories....
26603 24079 Feed Dog, 20 teeth (16 teeth to the
Inch) for 26605XC
26605XC 24079 Throat Plate for 26603
27303 Bobbin Winder Stop Latch Spring for
16522
27306 24084 Bobbin Winder Spool Pin for 27308...
27307 24084 " " " Stand for 27308.
27308 24084 Bobbin Winder Spool Stand complete,
for Serial 179362, Nos. 418E,
1562J, 2106, 10141, 11241,
27306, 27307 and two each 2455
and wood screws 1 In. No. 10
F.H.

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL LIST OF PARTS 29

No. Plate Name

27662 24083 Wrench (Accessories)
27684 Mobile Field Cabinet Cover Handle
Chain Hook for Serial 179309 (4)
27978 Drip Pan Nail for Serial 179326 (2).
27878 Mobile Field Cabinet Machine Rest
Rivet for Serial 179302 (4)
29633 24080 Feed Rock Shaft Crank with 157J, for
20333
Serial 30797 Mobile Field Cabinet Cover Handle
Eye Bolt Washer for Serial
179306 (4)
Serial 30821 Mobile Field Cabinet Cover Hasp
Staple Snap for Serial 179319
(4)
32572 24079 Tension Releasing Disc for 44118....
32574 24079 " " Pin for 44118
39575 Starting Rock Shaft Chain Hook for
Serial 179330
40552 24083 Wrench (Accessories)
43944 24079 Tension Releasing Lever
43945 24079 " Spring for 44118
43946 24079 Thread Take-up Spring for 44118
43976 24085 Feed Lifting Rock Shaft Crank Con
necting Rod with 125044 and two
966E
43990 Thread Take-up complete, Nos. 775E,
11204, 12404, 12410 and 43997...
43992 Feed Forked Connection complete,
Nos. 12332, 44003, 52165 and two
each 375C and 1518J
43997 24081 Needle Bar Connecting Link with 794E
and 12384, for 43990
44003 24085 Feed Forked Connection for 43992....
44118 24079 Tension complete, Nos. 7336, 32572,
32574, 43945, 43946, 44141 and
two 2102
*44124 Arm Shaft 12427 with 12197 and
20188, for 44197
44125 24080 Feed Lifting Rock Shaft for 44126...
44126 24080 Feed Lifting Rock Shaft complete,
Nos. 12376 and 44125
44134 24080 Oscillating Shaft Crank for 44135...
44135 24080 Oscillating Shaft Crank complete,
Nos. 1518E, 19449, 44134 and two
453AL
44139 Machine Field Cabinet Machine Hinge
Plate for Serial 179302 (2)
44141 Tension Screw Stud 50327C with
1560C, for 44118
44176 24084 Driving Attachment Starting Crank
Shaft 12477 with 12479, 20371
and two 2022, for Serial 179362.
44181 Face Plate Thread Guard (lower) for
12150
*44197 Arm Shaft 44124 with 20197
45874 Face Plate Thread Guard (upper) for
139615
Serial 48033 Cord (lO ft. long) from Switch Box
to Motor

From the library of: Superior Sewing Machine & Supply LLC
 30 NUMERICAL UST OF PARTS

No. Plate Name

50327C 24079 Tension Screw Stud for 44141
50788AL Motor Pulley Set Screw for 741946
(2)
51224W 24082 Arm Side Cover Thumb Screw
51224W 24079 Face Plate Thumb Screw
52016 24081 Presser Bar Lifter
52045 24082 Arm Oil Tube Packing (braided
cotton) for 11119 and 24131
52165 24085 Feed Connecting Link for 43992
52239 24082 Arm Spool Pin and Thread Eyelet
52454 24079 Thread Retainer
56813 Feed Bar Screw Center 313C with
1519J (2)
56814 Feed Lifting Rock Shaft Screw Center
307C with 1513J (2)
56814 Feed Rock Shaft Screw Center 307C
with 1513J (2)
56848 Bell Crank 5596 with 5599 and 5601,
for 5598
62740 24081 Shuttle Bobbin Case complete, for
19292, Nos. 591F, 592E, 2975,
15141 and 15278
67425 Mobile Field Cabinet Cover Hasp Bolt
Nut Lock Washer for Serial
179302 (16)
67425 Mobile Field Cabinet Cover Hasp
Staple Bolt Nut Lock Washer for
Serial 179306 (l6)
96788 Mobile Field Cabinet Base Corner
Brace for Serial 179302 (6)
120440 24083 Screw Driver (large) Accessories....
120616 24083 Belt Punch (Accessories)
120861 24083 Oil Can, 3 oz. filled with oil (Ac
cessories)
124352 Mobile Field Cabinet Cover Hasp
Staple Snap Chain Hook for
Serial 179318 (4)
125044 Crank Connecting Rod Oil Pad (felt)
for 20197
125044 Feed Lifting Rock Shaft Crank Con
necting Rod Oil Pad (felt) for
43976
125424 24079 Face Plate Thread Guard (upper)
Rivet for 139615
126079 Mobile Field Cabinet Cover Handle
Eye Bolt Nut Lock Washer for
Serial 179306 (4)
126150 Motor Bolt Nut Lock Washer for
Serial 179761 (4)
126849 Mobile Field Cabinet Base Accessory
Compartment Lid Hinge with four
wood screws 3/4 In. No. 7, for
Serial 179302 (2)
132590 24082 Arm Oil Tube Packing (braided
cotton) for 12454
139602 Oscillating Rock Shaft 24105 with
908C

From the library of: Superior Sewing Machine & Supply LLC
 31
NUMERICAL LIST OF PARTS

No. Plate Name

139603 Peed Regulator and Reverser Hinge
Screw Washer
139615 24079 Face Plate Thread Guard (upper)
45874 with 125424, for 20058...
140139E Feed Regulator and Reverser Hinge
Screw
140219C Starting Rock Shaft Stop Dog Set
Screw for 2770 (2)
Serial 179264 Mobile Field Cabinet complete, Nos.
Serial 179302 and Serial 179306
Serial 179301 Mobile Field Cabinet Base (wood)
base only for Serial 179302
Serial 179302 Mobile Field Cabinet Base complete,
for Serial 179264, Nos. 190566,
Serial 179301, Serial 179303,
Serial 179323, Serial 179324,
Serial 179325, Serial 179458,
two each 2718, 44139, 126849,
Serial 179319, wood screws 3/4
in. No. 6 F.H., 1 1/4 in. No. 14
F.H., four each 20022, 27878,
Serial 179304, Serial 179313
(component part of Serial
179314) wood screws 3/8 in. No.
5 R.H. Blacked, six 96788, eight
wood screws 3/4 in. No. 7 F.H,
and sixteen each 23250, 67425,
Serial 179315 and wood screws
1 1/2 in. No. 12 F.H
Serial 179303 Mobile Field Cabinet Base Accessory
Compartment Lid (wood) for
Serial 179302
Serial 179304 Mobile Field Cabinet Base Protecting
Strip for Serial 179302 (4)
Serial 179305 Mobile Field Cabinet Cover (wood)
cover only for Serial 179306....
•Serial 179306 Mobile Field Cabinet Cover complete,
for Serial 179264, Nos. Serial
179305, Serial 179320, Serial
179321, two Serial 179312, four
each 9281, 126079, Serial 30797,
Serial 179317 (component part of
Serial 179314) Serial 179322,
sixteen each 23250, 67425,
Serial 179315 and twenty-four
wood screws 1 1/2 in. No. 12
F.H
Serial 179307 Mobile Field Cabinet Cover Handle
(rubber) for Serial 179309 (2)..
Serial 179308 Mobile Field Cabinet Cover Handle
Chain for Serial 179309 (2)
Serial 179309 Mobile Field Cabinet Cover Handle
Nos. Serial 179307, Serial
179308 and two 27684, for Serial
179312 (2)
Serial 179310 Mobile Field Cabinet Cover Handle
Eye Bolt with Serial 179311, for
Serial 179312 (4)

From the library of: Superior Sewing Machine & Supply LLC
 32
NUMERICAL LIST OF PARTS

No. Plate Name

Serial 179311 Mobile Field Cabinet Cover Handle
Eye Bolt Nut for Serial 179310
(4)
Serial 179312 Mobile Field Cabinet Cover Handle
with Eye Bolts complete, for
Serial 179306, Nos. Serial
179309 and two Serial 179310 (2)
Serial 179313 Mobile Field Cabinet Cover Hasp for
•Serial 179302 and Serial 179314
(4)
Serial 179314 Mobile Field Cabinet Cover Hasp com
plete with Staple, Nos. Serial
179313 and Serial 179317 (4)....
Serial 179315 Mobile Field Cabinet Cover Hasp Bolt
with Serial 179316, for Serial
179302 (16)
Serial 179315 Mobile Field Cabinet Cover Hasp
Staple Bolt with Serial 179316,
for Serial 179306 (16)
Serial 179316 Mobile Field Cabinet Cover, Hasp Bolt
Nut for Serial 179315'(l6)
Serial 179316 Mobile Field Cabinet Cover Hasp
Staple Bolt Nut for Serial
179315 (16)
Serial 179317 Mobile Field Cabinet Cover Hasp
Staple for Serial 179306 and
Serial 179314 (4)
Serial 179318 Mobile Field Cabinet Cover Hasp
Staple Snap Chain with two
124352, for Serial 179319 (2),..
Serial 179319 Mobile Field Cabinet Cover Hasp
Staple Snap Chain with Snaps
complete, for Serial 179302,
Nob. Serial 179318 and two
Serial 30821 (2)
Serial 179320 Mobile Field Cabinet Cover Machine
Protector Pad (felt) left for
Serial 179306
Serial 179321 Mobile Field Cabinet Cover Machine
Protector Pad (felt) right for
Serial 179306
Serial 179322 Mobile Field Cabinet Cover Protect
ing Strip for Serial 179306 (4).
Serial 179323 Mobile Field Cabinet Knee Lever
Holder (left) for Serial 179302.
Serial 179324 Mobile Field Cabinet Knee Lever
Holder (right) for Serial 179302
Serial 179325 Mobile Field Cabinet Machine Button
for Serial 179302
Serial 179326 Drip Pan with two 27878
Serial 179327 Starting Rock Shaft Knee Lever Sock
et for Serial 179329
Serial 179328 Starting Rock Shaft for Serial
179329
Serial 179329 Starting Rock Shaft Serial 179323
with Serial 179327 and Serial
179769, for Serial 179331

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL LIST OF PARTS

No. Plate Name

Serial 179330 Starting Rock Shaft Chain with
39575, for Serial 179331
Serial 179331 Starting Rock Shaft complete, Nos.
6337, 6338, 7539, 20093, Serial
179329, Serial 179330 and two
2770
Serial 179362 24084 Driving Attachment with Bobbin
Winder Nos. 692D, 12475, 16522,
16592, 16594, 20372, 27308,
44176 and two 65D
Serial 179458' Mobile Field Cabinet Machine Button
Bolt with 1690R, for Serial
179302
Serial 179756 Knee Lever for Serial 179758
Serial 179757 " " Engaging Head for Serial
179758
Serial 179758 Knee Lever Nos. 25362, Serial
179756, Serial 179757 ana
Serial 179759, for Serial
179760
Serial 179759 Knee Lever Positioning Ball Spring
for Serial 179758
Serial 179760 Knee Lever complete, Nos. 2767 and
Serial 179758
Serial 179761 Motor Bolt complete, Nos. 1778R,
126150, Serial 180050 and two
9842 (4)
Serial 179769 Starting Rock Shaft Insert for
Serial 179329
Serial 179808 Belt (round, 1/4 in.) 28 in. long
with 25127 (Accessories)
Note; Belt Serial 179808 is furnished only
with Motor.
Serial 180050 Motor Bolt with 1778R, for Serial
179761 (4)
190566 Mobile Field Cabinet Lead Clamp for
Serial 179302
♦Serial 193963 Bed
741946 Motor Pulley (grooved) 2 1/4 in.
diam., 1/2 in. bore with two
50788AL
792853 Cord complete (to socket)
797307 Switch Box with Switch complete....

From the library of: Superior Sewing Machine & Supply LLC
 24079 - 1/2
From the library of: Superior Sewing Machine & Supply LLC
 24080- 1/3
From the library of: Superior Sewing Machine & Supply LLC
 24081 - 1/2

12U09

11170
1120ii.\

20060

^3
-12=i91

lp20J

808F-
J
19335
. ,-7298 19336
689c
19334
52016
19292
62740 12595

2975 15liiO 5-'2E 2975

From the library of: Superior Sewing Machine & Supply LLC
 24082 - %
748E 12^3

. 11119

24415

1053E

fflO

From the library of: Superior Sewing Machine & Supply LLC
 24083 - Vs
120«UO 261185

120861

6908

8909 27662 120616 25127

k c 1
22005

\
110552

From the library of: Superior Sewing Machine & Supply LLC
 24084 - Ml
Serial 179362
16522 i5oec
12178
i}27E
16516
1550X

15072

693D 75D
15077
1579C 165ia
692D 5960

5961
12170
180J
16530

16518

27308

27306

27307
loim
1562J

2106

12475
650

16594
44176
20372
861E ^ 20371
2022

2022 /
12477 ,
12479

From the library of: Superior Sewing Machine & Supply LLC
 1065AL 12197 896AL
20188
12357

850AL
3Cf?k
690E 16592 75C U14 6AL
15IP J
7958 20197
«35AL

375C
m. 15iaj
ro
45-
o
2165 CP
U\
1652^

U3976 1C19K to

ttU003
12323

. 24105
1513J
3022 835D

1518J
t
^935 U62AL 2020
From the library of: Superior Sewing Machine & Supply LLC
From the library of: Superior Sewing Machine & Supply LLC
From the library of: Superior Sewing Machine & Supply LLC