INTRODUCTION

WHO ARE WE?

We are Arab Engineers Water Technology (AEWT), a leading
provider and supplier of high-quality water treatment
systems and technologies, we provide top-notch water
treatment solutions ranging from basic water filters,
softeners and reverse osmosis equipment to customer
specified complex water treatment plants.
The founder of Arab Engineers Water Technology has been in
Jordan market since 1990, bringing to the market leading
water treatment solutions as well as elite services and with
the aid of AEWT team, Arab Engineers are now providing its
services to a large number of completely fulfilled clients.

After a long journey of passionate days and successful

stories, AEWT took its place among the leaders in the market,
and now considered one of the most reliable service
providers in the country. In addition, AEWT is an official
distributor for a number of the most prestigious brands in
water treatment equipment and technologies.
We deliver you the best that the market offers, cutting edge
water treatment technologies accompanied with over 25
years of experience in the industry, to ensure the success of
your projects.
WHERE ARE WE ?
WHAT WE OFFER

We design We plan We develop We Install We Maintain

1. CONSULTING :
We offer a wide range of technical and consultancy solutions
starting with studying the quality of the raw water; water analysis,
the inlet design parameters, treated water parameters, & the
preferred degree of treatment to finally design a competitive
treatment methodology and implement the suitable system for
delivering the required results.
2. PROVIDING, INSTALLING
AND COMMISSIONING SYSTEMS :
We only use high quality components sourced from Europe and
the US to provide our clients with the best solution for water
treatment.
For many years ago, our engineers at AEWT, co. work hardly to
innovate the most advanced water treatment systems for every
single water treatment solution you can think of. All the solutions
provided to meet all type of industry's needs & applications.
3. MANUFACTURING
Arab Engineers Water Technology manufactures, tests and
inspects steel epoxy coated pressure vessels, stainless steel
tanks, aeration towers, and clarifiers.
We have been in industrial field since 2002, and our products
have been distributed all around Jordan and neighbor
countries.
We utilize sophisticated CAD software in order to draw and
design the equipment before executing. In addition, using
premium quality material and thickness in manufacturing
the products that enable us to meet international standards.
Over the past years, we have accumulated extensive
experience in fabricating vessels for custom designs.
Assembling units on special stainless steel or epoxy coated
skids is one of our main specializations, such as RO units and
skid mounted water treatment stations.
 5. AFTER SALES & MAINTENANCE
Arab Engineers for Water Technology provides manuals with all
its deployed systems. Even though, our technical staff is still
available to answer any question that may encounter the
customer.
AEWT engineers & technicians have over 25 years of experience,
for that they are qualified to determine the best solutions for any
system under supervision of AEWT Technical Manager.
Assembling units on special stainless steel or epoxy coated skids
is one of our main specializations, such as RO units and skid
mounted water treatment stations.

4. SPARE PARTS
In order to keep units functioning at best, AEWT offers economic
and efficient solution for that, we provide large selection of spare
parts for all units and systems which enable delivering a
high-quality service, giving warranty and providing you with pure
drinking water to the maximum limit
Over the past years, we have accumulated extensive experience in
fabricating vessels for custom designs.
Assembling units on special stainless steel or epoxy coated skids
is one of our main specializations, such as RO units and skid
mounted water treatment stations.
OUR BUSINESS PROCESS

Implementation Deployment

- System construction - System launching

- System testing - Customer training
- QA / QC - System handover

Design & Engineering

- System design
- Site planning
- Execution Planning Operations & Maintenance

- Inspection & testing

- System monitoring
- Preventive maintenance
- Corrective maintenance
Planning:

- Study the source water

- Determine required output
- Site survey
- Project estimation
WHO WE SERVE

Chemical, Plastic, Textile Pharmaceutical and Cosmetics Hospitals and Labs Hotels and Restaur ants Agricultural and Poultry field
Fertilizers….Industries Industries

Drinking water Treatment Water Wells treatment Food and Beverage Household uses Contractors
Factories and Stations units Industries
 OUR STAFF

Represented by its highly qualified and experienced

management, AEWT engineers and technicians, have great
experience when it comes to designing, manufacturing, installing,
and commissioning water treatment systems, enabling us to turn
ground water, surface water or wastewater into premium quality
water. We are committed to provide the highest level of quality
and best grade services.
With over 30 engineer and technician, we seek to cultivate the
most exceptional customer experience. With our high available
technical support, high quality systems, and collective
experience.
WHY US?

The best Fast, reliable Competitive High quality Superior technical

engineering and efficient rates and great products support services
team in the project execution maintenance plans
field of water
treatment
technologies
WHY US?

We provide safe and reliable systems for converting

brackish water into pure, fresh water fit for human
consumption and industrial use. We design, assemble,
install and commission Reverse Osmosis desalination
systems and all pretreatment units that are tested, reliable
and user-friendly even in the toughest conditions. Our
technically advanced systems are designed to match the
required application, thus providing the most economical
and efficient solution in the market.
We have professionally installed large number of units and
projects over our years of experience which are still
performing efficiently.
Our Components & Parts

AEWT provides large selection of all parts and components for water treatment systems,
reverse osmosis, filtration and disinfection units
Our prices are very competitive in the market in addition to our fast shipping & delivery
due to large stock availability
 Pentair water company with its below products:

2. Fleck Control Head

1. Structural Pressure Vessels AEWT provides Fleck Control Valves which is
AEWT provides large scale of Structural one of Pentair Family, this high-performance
pressure vessels made from different materials valve covers a wide range of application.
such as: Whether the application is softening or filtration,
residential or industrial, hot or cold water, Fleck
• Poly-glass pressure vessels which are an
has a proven record of performance and
ideal choice for residential and light commercial
reliability
water softener/filtration applications.
Below is our available range of products valves,
• Composite pressure vessels are accessories:
non-corrosive, cost-effective solution for
commercial/industrial water treatment and
storage.
3. SIATA valves

SIATA offers a broad range of multiport

composite valves with service flow rates up to
35 m³/h and a complementary line of advanced
professional controllers and accessories.

4. Membrane housing
The high quality Codeline pressure vessels are
used for reverse osmosis and ultrafiltration
processes. They are built to maximize the
performance of water treatment and
purification systems.
The vessels are used in industrial, commercial
and municipal water treatment applications
across the world. Codeline's extensive pressure
vessel portfolio guarantees the right
specification for each application.
George Fischer 1

1. PVC-U System
Georg Fischer focuses on three core businesses: GF Piping Comprehensive simplicity
Systems, GF Automotive and GF Machining Solutions.
GF Piping Systems is a leading supplier of plastic piping
systems with global market presence. They offer pipes,
fittings, valves, automation products, jointing technology and 2
corresponding services for the treatment of water and
chemicals, as well as for the safe distribution of liquids and
gases.
Measurement, control and actuation.
Measurement encompasses a wide range of measurement
2. SYGEF System
technologies and parameters. Most of these products are Outstanding purity & performance
available in plastic and are offered with dedicated fittings,
which integrate our sensors perfectly into your piping system.
Control comprises various control functionalities (from 3
simple relays to PID controllers) and all major communication
technologies. Actuation includes pneumatic, electric and
magnetic actuators, which can be seamlessly combined with
all kinds of valves and accessories.

Georg Fischer Products : 3. Valves and Actuation

Georg Fischer Products :
4

4. Measurement and Control

Smart simplicity

5. Welding Machines 5

Origin: GF is Swiss company –

some of its products are from USA origin
Ion Exchange
Ion Exchange Products :
1.Resin 2.Chemicals 3.Membranes
Ion Exchange Company is a pioneer of water
treatment in India, they are manufacturer of
1 2
world class ion exchange resins for water
and non-water specialty applications,
membranes, water treatment chemicals and
specialty process chemicals, in ISO ,9001
14001 and OHSAS 18001 certified facilities

3
E-Tech Water Pumps

Franklin Electric offers high-quality pumping systems for submersible

well and surface applications. Franklin Electric’s multistage centrifugal
pump offering includes horizontal and vertical configurations. These units
are available in various metallurgies (cast iron, 304 stainless steel and 316
stainless steel) to satisfy your specific application requirements. Units are
now available up through 45 kW

LG Chem R.O Membranes

LG Chem develops and manufactures reverse osmosis (RO) membranes

that are widely used in various applications ranging from seawater
desalination to waste water reuse.

Origin: Korea
 Watch® Water with its headquarter in Germany,
Filtration Media is one of the fastest growing Companies in
manufacturing Scale Prevention, Adsorbers,
Filter Media, and INSTANT Dosing Solutions for
water and waste water treatment industries

Ozone Generator

Dosing Pumps

Rotary Vane Pumps

REVERSE OSMOSIS Atlantic Ultraviolet
UNITS HOUSEHOLD
AND COMMERCIAL

Actuators
VARIOUS COMPONENTS

Activated Carbon
Our Systems

Arab Engineers Water Technology offers a large selection of different types of

water treatment systems to meet all client's needs, based on the raw water quality,
water capacity and all related conditions .

1. Filtration Units

Arab Engineers Water Technology, provides economical & professional effective

solutions for water filtration systems in commercial and industrial sectors,
by using FRP Pentair brand tanks or our manufactured Steel epoxy coated
tanks. Our systems are designed to clarify water by removing sediment,
turbidity, iron, unpleasant tastes and odors, suspended particles, & unwanted
color, all of which are commonly found in surface and well water.
With the use of the correct pressure tanks, valves & accurate filter
media type options, Arab Engineers water filters can suit most
any water filtration requirements.
 4.Catalytic Carbon :
It contains Iron Coated Coconut shell it is the
best replacement of conventional activated
carbon, with higher filtration rate.

5. Katalox light :
Advanced catalytic filtration media, It is the
absolutely replacement of Birm and Green sand
It has high efficiency removal capacity of Iron,
Manganese & Hydrogen sulfide

1. Sand Filters : which are used to remove sediment,

solids, suspended particles & contaminants

2. Carbon Filters : used to adsorb chlorine, volatile organic

compounds (VOCs), taste, odor & color from water

3. Zeosorb Filters : which are installed to eliminates sediment,

solids, suspended particles, it's the absolutely replacement of
sand filter:
• Better filtration clarity it can reduces turbidity to less than
3 micron
• Higher velocity so you can use smaller filters
than the conventional Sand filters.
2. Industrial & Commercial
Ion-Exchange system

Arab Engineers Water Technology, provides a full range

of ion exchange systems using cation and/or anion exchange
resins for a wide variety of water treatment applications.

All AEWT ion exchange systems include the latest resin

technology using the highest quality resins supplied by
well-known manufacturers.
AEWT designs both standard and specially engineered
ion exchange equipment for wide range of applications
including softening, deionization (separate or mixed bed)
& nitrate removal

Ion Exchange Media: Below are all available s:

Ion-exchange media that can be filled inside tank
 1. Softeners cationic resin:
Remove calcium, magnesium, & certain
other metal cations in hard
water to get soft water

2. Mixed bed:
‘Polish' the water to higher levels of purity after it has
been initially treated by either a two-bed deionizer
or a reverse osmosis unit.

3. Demineralisation(Anion & Cation) :

Remove all positive ions and replaced with hydrogen ions, In addition
to anions replaced with hydroxyl anions then hydrogen and hydroxide
ions will spontaneously combine to form water.

4. Nitrates removal Resin:

Get red off all tasteless, colourless, and odourless nitrate
 3. Industrial & Commercial Reverse Osmosis Units

The R.O -4040 & R.O-8040 reverse osmosis systems

are designed and assembled at our factory with high
quality engineered and efficient reliable operation.

The RO system provides desalinated water 24 hours

a day, all units are fully automatic and easy to
maintain with low cost.

This equipment is mainly customized to suit individual

customer and water application needs

R.O-8040
AEWT offers full preinstalled R.O systems
for brackish water uses with high flow rates
for Industrial purposes. Our R.O -8040 units,
comes standard with pre-cartridge filter,
chemical dosing pumps and assembled on
a single skid. These systems can be
customized to fit individual customer &
water application needs. The RO-8040 series
has a capacity of 6100- m3/h.
R.O -4040
AEWT commercial reverse osmosis systems “RO-4040
series” is an energy-saving commercial RO unit, designed
perfect for tap, brackish and drinking water treatment
applications. Our small commercial reverse osmosis
equipment is capable to produce 8120- m3/day.
With inlet max. TDS: 5000 ppm.
These commercial RO systems produce high-quality water
at a very low cost.
OUR SOLUTIONS

For more than 20 years, AEWT has provided

all water purification solutions & services
to a wide range of industries, one thing that
hasn't changed is our commitment to providing
our customers with high quality, water purification
equipment along with timely, efficient service.

For each industry there is a specific procedure

to achieve the water quality required.

We design the units according to the unique

requirements specifications of every individual
client.

We have a complete range of water treatment

solution for the production of process water
needed for the manufacture of products.

We are using advanced software system in order

to draw the plant before execution.
Our Water treatment Plant mainly consists of:
1- Raw water pump
2- Pre-treatment stages
• Sand filtration
• 5 micron cartridge filter
• Granular activated carbon filter or Dechlorination
• Softener or Antiscalant
3- Reverse osmosis unit
4- Post treatment (DISINFECTION)
 1- Water treatment Station
Capacity : 15 - 50 m3/day
Arab Engineers Water technology, introduces & provides a direct
selling on-site water treatment stations for 5 Gallons & cup filling
drinking water, that treats water from existing water resources
& converts it into drinking water to meet standards for
Jordanian water authority. The water source can be from any of
the following: Groundwater, Surface water and Public supply
system water

2- Customized Water treatment plant

Capacity: 1-100 m3/h
Large scale desalination water treatment plants are commissioned
to serve larger scales, drinking water filling factories or industrial
applications using raw water from the brackish water or well water.
Our desalination systems apply reverse osmosis (RO) process to desalt
water. Desired product water parameters can be set using control &
monitoring equipment fitted in each plant.
Large scale plants are supplied with all pretreatment & post stages
which includes multimedia filtration, chemical dosing & the
disinfection units.
3- Mobile systems:

3.1 Skid mounted units: with a capacity of 15 - 50 m3/day

The system is assembled on a single skid, making it convenient for

transportation & repositioning without difficulty of integrating
components individually at site. Each unit is fixing using PVC
interconnecting piping & can be operated immediately by connecting
inlet-outlet pipes and power supply

3.2 Containerized units: with a capacity of 5 - 100 m3/hr

The containerized units are heavy duty self-contained,

turnkey systems, installed inside corrosion resistant
metal containers of 20 ft (6m) and 40 ft (12m) sizes. Each
containerized reverse osmosis system is engineered with
high-quality components to handle all types of harsh
conditions. The plants that installed inside containers
can be easily moved without trouble. This is especially
convenient for shipping/exporting to international
destinations.
 Water Cup Filling Machine 1.5 Bottles filling line

4. Aeration Tower

Arab Engineers Water Technology designs

& manufactures Aeration Towers to remove
H2S & oxidize iron.
5.Clarifiers
Arab Engineers Water Technology designs &
manufactures Clarifiers to remove solid, particulates,
suspended solids & turbidity
6. Advanced Support
AEWT offers advanced technical support,
for Welding services
1. Stainless Steel orbital machin

When high quality results are required, orbital welding is the first choice
for connecting SS pipes.
Orbital welding solutions are used in many places. Due to the special
quality of the seams, the use of orbital welders is indispensable in many
areas, such as: Pharmaceuticals & chemicals, food & beverages,
petrochemicals & power plants

Orbital solves unique challenges

Orbital tube welding is an efficient process
Orbital is helpful in situations where welding must be
Orbital is an economical choice for welding components
completed in tight spaces that may not be possible
because the welds created are consistent & clean
with manual welding

Orbital welding is a productive option

Orbital welding involves the machinery doing the majority Orbital tube welding is ideal for big projects
of the work, leaving your technicians’ time open for Orbital tube welding results in lower overhead costs,
other tasks the highest-quality welds and shorter lead times
 2. BCF machine

We are committed to introduce an advanced form for welding PVDF fittings &
pipes. The BCF Plus- fusion machine from Georg Fischer has been developed
for high-purity applications, particularly in the semiconductor industry, the
pharmaceutical & food industries and for highest grade chemicals

Properties & characteristics of BCF® Plus fusion joints

Clear, simple operator guidance

Welding free from beads and crevices
Clear, unambiguous operator guidance via the liquid
The result of the jointing process is a surface similar to the
crystal display leads the user interactively through
actual pipeline components, free from beads crevices.
the fusion process in logical operating steps.
There are therefore no dead legs, the surface roughness
is in the range of the pipe components

Welding report / traceability

Reproducible jointing processes The welding parameters for the relevant welding>
The high reproducibility of the joints is assured by the operations can be read out directly via various interfaces
clearly defined & controlled process sequence on the machine. It is possible to print these out on paper
Some of our projects in various fields:

1-Food Industries
Double stage R.O plant
with a capacity of 4 m3/hr

Filtration & softening systems with

a capacity of 50 m3/h contains:

• Zeosorb Filter 50 m3/h

• Double Carbon Filter 50m3/h
• Triplex Softener
Some of our projects in various fields:

2-Hotels

Triplex Softener & Sand

filters with a capacity of 20 m3/hr Filtration System

Triplex Softeners R.O plant

Some of our projects in various fields:

3- Agricultural purposes: Farms

Private Farm: Water Treatment Water Treatment Unit with a capacity

Unit with a capacity of 12 m3/h 30 m3/h
Some of our projects in various fields:

4- pharmaceutical Purposes & cosmetics

Aeration and filtration plant for the raw

water well with a capacity of 20 m3 /h Deionizer with a capacity of 3 m3 /h
Some of our projects in various fields:

5- Well Water Treatment

Al Azraq private well: desalination Containerized unit for well water in

plant with a capacity of 24 m3/h Algeria with a capacity of 12 m3/h

AL Istiqlal well: desalination plant

with a capacity of 30 m3/h
Some of our projects in various fields:

6- Drinking water treatment stations

Private stations: complete water

Water Treatment Plant with a capacity of 24 m3/h
treatment station with a capacity of 15 m3/day
Some of our projects in various fields:

7- Chemicals & detergent industries

8- Hospitals

Spartan: Desalination plant with

a capacity of 20 m3/hr

Al Mowasah Hospital: complete water

water treatment unit 10 m3/hr for detergents includes zeosorb treatment unit with a capacity of
filter, carbon filter and softeners all equipped with GF 8 m3/day, equipped with chlorine
diaphragm valves. RO unit with touch screen programmable controlling system
control
OUR CUSTOMERS
ARAB ENGINEERS WATER TECHNOLOGY L.T.D

Show room
Tel: +962 6 5561 662
Fax: +962 6 5543 639
Mob: +962 79 8 79 13 64
Complex no. 227, Khalda.
Amman, Jordan
P.O Box 604 Amman 11953 Jordan

Factory
Tel: +962 6 4890055
Complex no.9, Marka
Hazaa Abu Jamous street, Amman

Email : info@arab-engs.com
Website: www.arab-engs.com