PowerVerter APS INT Series - Versatile inverter / Highlights
charger w/ automatic line-to-battery switchover ● 12V DC to 230V AC / 50 Hz
power inverter
● 1200 watts peak (600 watts
MODEL NUMBER: APSINT612 continuous), 2 AC outlets
● 3 stage, 20 amp selectable
Description wet/dry cell battery charger
Tripp Lite's APSINT612 3-function DC-to-AC inverter with auto line-to-battery transfer and integrated
charging system serves as an extended run UPS, a standalone power source or an automotive inverter. ● Auto line to battery transfer
Supplies up to 600 watts of continuous 230V AC power to 2 AC outlets from any 12V battery or enables UPS protection during
automotive DC source. When AC cable is connected to a live wall socket, utility power passes through to blackouts
connected equipment and the battery set is recharged via 3 stage, 20 amp charging system. In UPS ● Compatible with marine,
mode, the APS system responds to blackouts and brownouts with an uninterrupted transfer to battery- automotive, telecom, computer,
derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies emergency and a variety of
batteries and cabling). Reliable large transformer design with efficient PWM sine wave output and other applications
frequency control powers resistive electronic loads or large inductive motors, compressors and other
items with high current needs on startup. Supports an unlimited amount of runtime with any number of
user-supplied batteries connected. Highly adaptable to a variety of applications and site conditions with
Package Includes
adjustable charger settings for wet/gel battery types and selectable line to battery power transfer voltages. ● APSINT612 inverter/charger
● Instruction manual with warranty
Features information
● Functions as an extended run UPS system, standalone power source and automotive inverter
● Includes AC input cord and auto-transfer to enable battery charging and automatic UPS support for
blackouts & brownouts
● 600 watts continuous output power; provides up to twice this rating for momentary startup of inductive
loads
● Battery runtime is dependent upon the size and number of user-supplied 12-volt batteries used
● 2 outlets; 6-ft. AC power cord; DC input terminals for 12V battery connection
● Converts 12 volt DC to 230 volt AC
● Frequency control for operating stability
● Advanced 20 amp, 3-stage battery charger and selector switch for gel or wet cell batteries
● Resettable circuit breaker protects APS against system overload
● Switch allows user to select between off, auto-invert and charge-only settings
● 6 diagnostic LEDs indicate AC present, on battery, overload, & battery voltage level (high, medium, &
low)
● Configuration switches to allow the user to select the high and low voltage for the unit to automatically
transfer from AC power to battery backup
● Coated internal circuit boards offer continuous operation in humid environments (0-95%, non-
condensing)
● Allows unlimited runtime capability by allowing the use any number of user-supplied batteries
Specifications
OVERVIEW
UPC Code 037332118554
INPUT
Maximum Input Amps / Watts DC INPUT: Full continuous load - 56A at 12VDC. AC INPUT: 4.8 amps at 230VAC with full inverter and charger
load
Recommended Electrical Service DC INPUT: Requires 12VDC input source capable of delivering 56A for the required duration (when used at full
continuous capacity). For automotive applications, professional hardwire installation with 100A minimum battery
system fusing is recommended. A
1/3
Input Connection Type DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: IEC-320 C14 inlet connection
Voltage Compatibility (VAC) 230
Voltage Compatibility (VDC) 12
OUTPUT
Frequency Compatibility 50 Hz
Pure Sine Wave Output No
Output (Watts) Continuous - 600 watts, Overpower (up to 1 hour) - 900 watts, Double-Boost wattage (up to 10 seconds) - 1200
watts
Nominal Output Voltage(s) 230V
Supported
Output Receptacles (2) 5-15R
Continuous Output Capacity (Watts) 600
Output Nominal Voltage AC OUTPUT: 230VAC nominal, DC CHARGER OUTPUT (DC): 12VDC nominal
Output Voltage Regulation LINE POWER (AC): Maintains 230V nominal sine wave output. INVERTER POWER (AC): Maintains PWM sine
wave output voltage of 230 VAC (+/-5%). DC CHARGER OUTPUT (See battery recharge rate section)
Output Frequency Regulation 50 Hz (+/- 0.3 Hz)
Overload Protection Includes 3A input breaker dedicated to the charging system and 4A output breaker for AC output loads
BATTERY
Expandable Runtime Yes
Expandable Runtime Description Runtime is expandable with any number of user supplied wet or gel type batteries
DC System Voltage (VDC) 15
Battery Pack Accessory (Optional) <a class="productLink" href="//tripplite.eaton.com/12VDC-Sealed-Maintenance-Free-Battery-All-Inverter-
Chargers-12VDC-Battery-Connections~98-121">98-121</a> sealed lead acid battery (optional)
Battery Charge Includes 20 amp DC charging system with selectable profiles for vented wet cell and sealed gel cell batteries (see
manual for detailed charger information)
USER INTERFACE, ALERTS & CONTROLS
Front Panel LEDs Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7
levels reported). See manual for sequences.
Switches 3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant
on/off control of the inverter system when used in conjunction with included APSPVREMOTE accessory when used
in inverter mode. In AC uninterruptible power mode, "auto/remote" setting enables automatic transfer from line power
to battery power - to maintain continuous AC power to connected loads.
PHYSICAL
Material of Construction Polycarbonate
Cooling Method Fan
Form Factors Supported Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional
mounting information)
Shipping Dimensions (hwd / in.) 13.50 x 11.00 x 10.75
Shipping Dimensions (hwd / cm) 34.29 x 27.94 x 27.30
2/3
Shipping Weight (lbs.) 20.00
Shipping Weight (kg) 9.07
Unit Dimensions (hwd / in.) 7.000 x 9.000 x 9.000
Unit Dimensions (hwd / cm) 17.8 x 22.2 x 21.6
Unit Weight (lbs.) 18.2
Unit Weight (kg) 8.26
ENVIRONMENTAL
Relative Humidity 0-95% non-condensing
LINE / BATTERY TRANSFER
Transfer Time (Line Power to 4-6 milliseconds
Battery Mode)
Low Voltage Transfer to Battery User configurable to 144V, 163V, 182V & 201V
Power
High Voltage Transfer to Battery User configurable to 259V, 278V
Power
WARRANTY & SUPPORT
Product Warranty Period Call if outside the U.S, Canada or Puerto Rico
(Worldwide)
1000 Eaton Boulevard © 2025 Eaton. All Rights Reserved.
Cleveland, OH 44122 Eaton is a registered trademark. All other trademarks
United States are the property of their respective owners.
https://tripplite.eaton.com
3/3
