GE LAMPS CATALOG

LED & TRADITIONAL 2024

Table of Contents
INTRO: WE ARE........................................... 4
SELECTABLE LED LAMPS . . .......................... 6
LED LAMPS.................................................. 8
LED Lamps - Tubes...............................................................................................9
Type A (Ballast Compatible)........................................................................................... 12
Type A+B (Dual Mode).. .....................................................................................................17
Type B (Ballast Bypass)................................................................................................... 18
Type C (Remote Driver).. ................................................................................................. 26

LED Lamps - HID. . ................................................................................................ 30

LED HID for Hazardous Locations................................................................................. 40

LED Lamps - Plug-in.. ......................................................................................... 44

Type A (Ballast Compatible).......................................................................................... 46
Type B (Ballast Bypass).................................................................................................. 48

LED Lamps - Directional................................................................................... 54

PARs.................................................................................................................................... 56
MR16s................................................................................................................................. 58
RS Cans. . ............................................................................................................................ 60
Reflectors.......................................................................................................................... 62

LED Lamps - General Purpose.. ..................................................................... 64

A-line.................................................................................................................................. 65
Decorative......................................................................................................................... 68
TRADITIONAL LAMPS & BALLASTS. . ....... 72
Traditional Lamps.. ............................................................................................... 73
Linear Fluorescent Lamps............................................................................................... 74
High Intensity Discharge Lamps................................................................................... 80
Compact Fluorescent Lamps . . ....................................................................................... 92
Halogen Lamps. . ............................................................................................................... 96
Incandescent Lamps....................................................................................................... 99

Ballasts. . ................................................................................................................. 103

Linear Fluorescent Ballasts. . ......................................................................................... 104
Compact Fluorescent Ballasts..................................................................................... 130
Electromagnetic HID Ballasts....................................................................................... 138

APPENDIX................................................. 152
GLOSSARY OF TERMS.............................153

GE Lamps provide unmatched

peace of mind.
We are:
COMPLETE
Current's comprehensive offering of GE Lamps includes high performance LED lighting solutions
in addition to popular Traditional products. GE Lamps cover a wide range of Linear Fluorescent,
High Intensity Discharge, Compact Fluorescent, Halogen, Incandescent and Ballast applications.

INNOVATIVE
Current's exceptional engineering professionals use deep knowledge of Traditional lamp
applications to create industry-leading LED lamps that provide the right amount of light while
saving energy and lasting longer. Use them to transform the look and efficiency of your facilities.

4 – www.LED.com/Lamps
DEPENDABLE
GE Lamps have provided the exceptional light quality that you know and love for years.
Current's engineers continue to develop reliable GE LED Lamps that fit Traditional
applications and meet industry standards for equivalency claims.

TRUSTED
A reputation for quality and reliability is our legacy. Current continues the proud tradition today,
creating GE LED Lamps that last up to 70,000 hours and delivering superior solutions for even
the most challenging replacement lamp applications.

www.LED.com/Lamps – 5
LumenChoice / SpectraChoice rev 082222 v1

Selectable LED Lamps

LumenChoice / SpectraChoice rev 082222 v1

LumenChoice / SpectraChoice rev 082222 v1

LumenChoice
Optimize
LumenChoice®
/ SpectraChoice
LumenChoice rev
® 082222
light levels and power v1
Make lumen/wattage
LumenChoi
selections LumenCh
consumption instantly, maximizing easily at any time with integrated
energy savings immediately switch, no tools required

LumenChoice + SpectraChoice
SpectraChoice
LumenChoice
® ®™ SpectraC
™
LumenCh
SpectraChoice™ L
SpectraChoice
LumenChoice
Match the color of lighting
across a facility or choose to
®™
+ Make color temperature selectionsSpectraC
LumenCh
easily at any time with integrated
SpectraChoice
change the aesthetic of a space™ switch, no tools required
SpectraC
LumenChoice ®+
SpectraChoice™
LumenChS
SpectraC

L
pg. 20
LED Tubes
S
6 – www.LED.com/Lamps
 Reduce Inventory
Reduce SKU count and inventory dollars

Simplify Projects
Simplify BOMs, project management, MRO
Maintain utility rebates

Optimize Solutions
Create flexibility for
installers to react on-site

Take control of your lighting & inventory with our full line of Selectable LED Lamps

pg. 34 46 61 65
LED HID
pg.
LED Plug-In
pg.
LED RS Cans
pg.
LED A-Line

www.LED.com/Lamps – 7
LED Lamps
 T9 (5/8''
T5 Circline
diameter) diameter) 4-Pin
(1-1/8'' Miniature Bi-PinBase
Base(G10q)
(G5)
Mod-U-Line® T12/U3 (1 1 ⁄ 2'' diameter) Medium Bi-Pin Base (G13)

T8/U6 (1'' diameter) Medium Bi-Pin Base (G13)

LED Lamps - Tubes T8/U6 (1'' diameter) Medium Bi-Pin Base (G13)

T5 (5/8'' diameter) Miniature Bi-Pin Base (G5)

T6 (3/4'' diameter) Single Pin Base ( Fa8) Mod-U-Line® T12/U3 (1 1 ⁄ 2'' diameter) Medium Bi-Pin Base (G13)
Lamp Drawings (not drawn
T9 Circline (1-1/8'' to 4-Pin
diameter) scale)
Base (G10q)
T9 Circline (1-1/8'' diameter) 4-Pin Base (G10q)

T6 (3/4'' diameter) Single Pin Base ( Fa8)

T5 T8
(5/8'' diameter)
diameter)Miniature
Single PinBi-Pin
Base (Base
Fa8) (G5)
T5
T5(5/8''
(5/8" diameter)
(1''
diameter) Miniature
Miniature Bi-Pin
Bi-Pin Base
Base (G5)
(G5) Mod-U-Line®® T12/U6
Mod-U-Line T12/U3 (1-1 2'' diameter)
(1 1 ⁄⁄ 2'' diameter) Medium
Medium Bi-Pin
Bi-Pin Base
Base (G13)
(G13)
Mod-U-Line® T12/U3 (1 1 ⁄ 2'' diameter) Medium Bi-Pin Base (G13)

T6T8 (1'' diameter)

(3/4'' diameter) Single
Single Pin
Pin Base
Base ((Fa8)
Fa8) Mod-U-Line® T12/U6 (1-1 ⁄ 2'' diameter) Medium Bi-Pin Base (G13)
T6(1''
T8
T8 (3/4''
(1" diameter)
diameter)
diameter) Single
Medium
Medium Pin Base
Bi-Pin
Bi-Pin Base ( Fa8)
Base(G13)
(G13) T12 (1-1 ⁄ 2'' diameter) Single Pin Base ( Fa8)

T8 (1'' diameter) Medium Bi-Pin Base (G13) T12 (1-1 ⁄ 2'' diameter) Single Pin Base ( Fa8)
T8
T8 (1'' diameter)Single
(1" diameter) SinglePin
Pin Base
Base ( Fa8)
(Fa8) T12 (1-1
Mod-U-Line ® ⁄ 2'' diameter) Medium Bi-Pin Base (G13)
T12/U6 (1-1 ⁄ 2'' diameter) Medium Bi-Pin Base (G13)
T8 (1'' diameter) RecessedSingle
T8 (1'' diameter) DoublePinContact Base (R17d)
Base ( Fa8) Mod-U-Line® T12/U6 (1-1 ⁄ 2'' diameter) Medium Bi-Pin Base (G13)

T8 (1"
T8 diameter)Recessed
(1''diameter) RecessedDouble
Double Contact
Contact Base
Base (R17d)
(R17d) T12 (1-1 ⁄ 2'' diameter) Medium Bi-Pin Base (G13)
T8 (1'' diameter) Medium Bi-Pin Base (G13) T12 (1-1 T12
⁄ 2'' diameter) RecessedSingle
(1-1 ⁄ 2'' diameter) DoublePinContact Base (R17d)
Base ( Fa8)
T8 (1''
T10 (11/4'' diameter)
diameter) Medium
Recessed Bi-PinContact
Double Base (G13)
Base (R17d) T12 (1-1 ⁄ 2'' diameter) Single Pin Base ( Fa8)

T12 (1-1 ⁄ 2'' diameter) Recessed Double Contact Base (R17d)

T10 (11/4'' diameter) Recessed Double Contact Base (R17d) T12 (1-1 ⁄ 2'' diameter) Medium Bi-Pin Base (G13)
T8 (1'' diameter) Recessed Double Contact Base (R17d) T12 (1-1 ⁄ 2'' diameter) Medium Bi-Pin Base (G13)
T8 (1'' diameter) Recessed Double Contact Base (R17d) T17 (2-1/8'' diameter) Mogul Bi-Pin (G20)

T8/U6 (1''U6
T8 (1" diameter) diameter) Medium
Medium Bi-Pin Bi-Pin
Base Base (G13)
(2G13)
T8/U6 (1'' diameter) Medium Bi-Pin Base (G13)
T12 (1-1 ⁄ 2'' diameter) Recessed Double Contact Base (R17d)
T10 (11/4'' diameter) Recessed Double Contact Base (R17d) T12 (1-1 ⁄ 2''T17
diameter) diameter)Double
(2-1/8''Recessed MogulContact
Bi-Pin (G20)
Base (R17d)
T10 (11/4'' diameter) Recessed Double Contact Base (R17d)
Power Groove® (2-1/8'' diameter)
Recessed Double Contact Base (R17d)

T8 (1" diameter) U1-5/8 Medium Bi-Pin Base (2G13)

T17
Power diameter)
Groove
(2-1/8'' ® Mogul
(2-1/8'' Bi-Pin (G20)
diameter)
Mod-U-Line® T12/U3 (1 1 ⁄ 2'' diameter) Medium Bi-Pin Base (G13) T17 (2-1/8'' diameter) Mogul Bi-Pin (G20)
Recessed Double Contact Base (R17d)
Mod-U-Line® T12/U3 (1 1 ⁄ 2'' diameter) Medium Bi-Pin Base (G13)

Base Identification (not drawn to scale)

LED Lamps - Tubes

Power Groove®® (2-1/8'' diameter)

Power Groove
Recessed Double(2-1/8'' diameter)
Contact Base (R17d)
Recessed Double Contact Base (R17d)

Recessed Double
Med BiPin
Min BiPin
Min BiPin Mog
Med BiPin
Med BiPin Single
Mog
Single Pin
BiPin
Pin Recessed
Single
Double
Contact
Pin Recessed
4-Pin Double 4-Pin
G13 G5
G5 G20
G13
G13 Fa8
Fa8G20 ContactFa8 G10q
Contact G10q
Mod-U-Line® T12/U6 (1-1 ⁄ 2'' diameter) Medium Bi-Pin Base (G13) R17d
R17D (Circline)
R17d (Circline)

Mod-U-Line® T12/U6 (1-1 ⁄ 2'' diameter) Medium Bi-Pin Base (G13)

www.LED.com/Lamps – 9

T12 (1-1 ⁄ 2'' diameter) Single Pin Base ( Fa8)

 LED Lamps - Tubes
LED Tubes, sometimes referred to as "TLEDs," are meant to use linear fluorescent sockets and fixtures.
LED Tubes have the same length and pins as the linear fluorescent lamps they are intended to replace. The
details of how the fixture is wired and the auxiliary equipment used may vary, depending on the LED Tube solution.

The lighting industry refers to three basic Types of LED Tubes:

• Type A LED Tubes are intended to be used as direct replacements for linear fluorescent lamps, with no
modification to the fixture. Type A LED Tubes operate from fluorescent ballasts.

• Type B LED Tubes operate from mains voltage. The ballast is bypassed and the fixture is re-wired according
to the installation instructions that come with the lamp. Wiring may vary across Type B LED Tubes from
different manufacturers. A retrofit fixture label indicating the LED Tube used and that the fixture has been
re-wired is provided to be applied to the fixture.

• Type C LED Tubes operate from dedicated remote (external) LED drivers. Instead of a ballast, a remote driver
is used to provide the proper voltage and current for the Type C LED Tubes. A retrofit fixture label indicating
the LED Tube and Driver used is provided to be applied to the fixture. Type C LED Tube and Driver solutions
vary across the industry – they are not yet standardized like linear fluorescent lamps and ballasts.

There are also "hybrid" lamps that can cover multiple Types of LED Tubes, depending on how they are implemented.

Current offers a wide range of GE LED Tubes to replace linear fluorescent lamps, including all of the Types above.
Each Type of LED Tube offers different advantages, so the right solution may vary by application.

Which LED Tube is right for you?

A basic comparison of the Types of LED Tubes is provided below. For more detailed information, please contact
your Current sales representative.

Ballast Compatible Ballast Bypass External LED Driver

(UL Type A) (UL Type B) (UL Type C)
Easy Plug & Play Simple Long-Term Solution Robust & Flexible System

Uses fluorescent ballast Uses no ballast / driver Uses external LED driver

No re-wiring required Re-wire to bypass ballast Replace ballast with driver

Low installation cost Low future maintenance Low voltage output

LED Lamps - Tubes

Direct replacement (lamp) Retrofit Kit (lamp, label) Retrofit Kit (lamp, label, driver)

Dimming limited by ballast Dimming impractical Dimming driver (0-10V)

Check compatibility Consider misapplication fuse Field-tunable driver settings

10 – www.LED.com/Lamps
 LED Lamps - Tubes
LED Tube Wiring Basics:

The wiring diagrams below are provided as general guidance for GE LED Tubes. Other manufacturers' may
vary. Refer to installation guides provided with GE LED Tubes for more detailed directions. If sockets are in
good condition, no socket replacement should be necessary for GE LED Tubes. Add a jumper to non-shunted
sockets, or tie both wires from a non-shunted socket to the incoming power as shown.
Ballast Compatible Ballast Bypass External LED Driver
(UL Type A) (UL Type B) (UL Type C)
Follow Ballast Wiring Diagram Follow Lamp Wiring Diagram Follow Driver Wiring Diagram
High Voltage Ballast Output to Sockets Mains Voltage AC to Sockets Low Voltage DC Driver Output to Sockets

0-10V Dimmer/Control
(Used with Instant Start Ballasts)

L L L
Shunted Sockets

Ballast Driver
N N N

Type A LED Tube Type B LED Tube Type C LED Tube

Type A LED Tube Type B LED Tube Type C LED Tube

0-10V Dimmer/Control
(Used with Programmed Start Ballasts)
Non-Shunted Sockets

L L L
Ballast Driver
N N N

Type A LED Tube Type B LED Tube Type C LED Tube

Type A LED Tube Type B LED Tube Type C LED Tube

LED Tube Construction, Coating, & covRguard®:

GE LED Tubes are primarily constructed of glass tubes with an internal coating for diffusion. This is similar to
linear fluorescent construction that has been used for decades. Glass is a stable material and works well for
most applications. The coating inside the glass provides good diffusion, spreading out the light and eliminating
hot spots and pixilation from the individual LEDs.

GE LED Tubes are also offered with PET coating. This white coating is heat-shrunk onto a clear glass tube.
Diffusion is supplied by the PET coating, which also provides some shatter resistance. These lamps are NSF
Splash Zone rated.

GE LED Tubes are also available with covRguard®. Similar to covRguard® on linear fluorescent lamps, a
polycarbonate sleeve is applied over the glass tube and affixed to the lamp end caps. This construction
provides excellent shatter protection. These lamps are NSF Food Zone (Non-contact) rated.
LED Lamps - Tubes

covRguard®

www.LED.com/Lamps – 11
 LED Lamps - Tubes - Type A
LED Tubes - Type A

GE Type A LED Tubes offer a fast and easy upgrade to LED. No modification to the fixture is necessary. Simply
replace the linear fluorescent lamp with the Type A LED Tube. The ballast remains in the circuit, powering the lamps.
Confirm ballast compatibility at www.LED.com/LEDTUBES-ballast-compatibility.

LED Tube dimensions

Internal driver converts conform to ANSI specs for
ballast output to voltage linear fluorescent lamps
and current used by LEDs

Glass tubes with internal diffusion

coating provide stability over time
and wide light distribution
Metal end caps are
preferred for Type A
applications where pin
LED Lamps - Tubes

arcing is possible

12 – www.LED.com/Lamps
LED Lamps - Tubes - Type A
Catalog Logic:

Bulb Shape:
Bulb shape DLC:
followed by Indicates whether
its size (the product is listed on the
maximum Lamp Watts: DesignLights Consortium®
diameter Typical Lamp Qualified Products List
Rated Life L70:
of the bulb Watts on Normal Hours of operation the lamp will provide before
expressed Ballast Factor MOL (in): reaching 70% of its original lumen output
in eighths of Location Rating:
(does not Maximun Overall Length in inches
an inch). Location Rating
include ballast Color Rendering Index
Description: as defined for LED
consumption) System Watts: (CRI or R):
Lamp Model Lamps by UL 1993
Total input watts, including An indication of the ability
Description ballast and lamp consumption of the lamp to render object
Order Code: typical of each Ballast Factor colors in a normal natural
Use the order way. The higher the number Additional
code when Lumens (initial): (0-100), the better the color Information:
ordering to Typical lamp lumens when appearance. Typical
Base Type: Carton Quantity: application and/
ensure that operating on each Ballast Factor
ANSI Base Number of lamps or other important
you receive the
packed in a carton Color Temperature (K): information.
exact product
A measure of the visual "warmth" or
you require
"coolness" of the light from the lamp.
The higher the value, the whiter or
"cooler" the light appears.

Low Ballast Factor Normal Ballast Factor High Ballast Factor

Color
Bulb Base Lamp Order Carton MOL System Lumens System Lumens System Lumens Temp Rated Life Location Additional
Shape Type Watts5 Code Description Qty2 (in) Watts (Initial) Watts (Initial) Watts (Initial) (Initial) CRI L70 (Hrs)1 DLC®4 Rating3 Information
Integrated 4ft Glass Tubes (operates on Instant Start or Program Start Ballast)
T8 G13 18 35767 LED18ET8/G/4/830 20 48 17 2100 20 2500 26 3250 3000K 80 70,000 Yes Damp Instant or PRS Ballast

LED18ET8/G/4/830
CCT (30 = 3000K)
Wattage CRI (8 = 80)
"G" indicates
E = Type A ("E" = Electronic ballast) Glass tube Length in feet

Bulb Shape

LED Lamps - Tubes

www.LED.com/Lamps – 13
 LED Lamps - Tubes - Type A
Integrated Glass Tubes - Type A
Low Ballast Factor Normal Ballast Factor High Ballast Factor
Color
Bulb Base Lamp Order Carton MOL System Lumens System Lumens System Lumens Temp Rated Life Location Additional
Shape Type Watts5 Code Description Qty2 (in) Watts (Initial) Watts (Initial) Watts (Initial) (Initial) CRI L70 (Hrs)1 DLC® ID4 Rating3 Information
Integrated 4ft Glass Tubes (operates on Instant Start or Program Start Ballast)
T8 G13 18 35767 LED18ET8/G/4/830 20 48 17 2100 20 2500 26 3250 3000K 80 70,000 PXTA9H72 Damp
G13 18 35768 LED18ET8/G/4/835 20 48 17 2100 20 2500 26 3250 3500K 80 70,000 P3FTDF97 Damp
G13 18 35769 LED18ET8/G/4/840 20 48 17 2150 20 2600 26 3400 4000K 80 70,000 P9HNH1U8 Damp
G13 18 35772 LED18ET8/G/4/850 20 48 17 2150 20 2600 26 3400 5000K 80 70,000 PMHB5Y1H Damp
G13 18 35773 LED18ET8/G/4/865 20 48 17 2150 20 2600 26 3400 6500K 80 70,000 - Damp
G13 15 35790 LED15ET8/G/4/830 20 48 15 1850 17 2150 23 2900 3000K 80 70,000 PNH7QX7P Damp
G13 15 35791 LED15ET8/G/4/835 20 48 15 1850 17 2200 23 2950 3500K 80 70,000 PC3FZA9X Damp
G13 15 35793 LED15ET8/G/4/840 20 48 15 1950 17 2300 23 3100 4000K 80 70,000 PXTTMVUC Damp
G13 15 35797 LED15ET8/G/4/850 20 48 15 1950 17 2300 23 3100 5000K 80 70,000 PDHK69J3 Damp
G13 15 35798 LED15ET8/G/4/865 20 48 15 1950 17 2300 23 3100 6500K 80 70,000 - Damp
G13 10 34277 LED10ET8/G/4/830 20 48 11.5 1350 13 1600 17.5 2100 3000K 80 70,000 - Damp
G13 10 34279 LED10ET8/G/4/835 20 48 11.5 1400 13 1600 17.5 2150 3500K 80 70,000 PRHQNZN1 Damp
G13 10 34280 LED10ET8/G/4/840 20 48 11.5 1450 13 1700 17.5 2300 4000K 80 70,000 P7YZ0A29 Damp
G13 10 34282 LED10ET8/G/4/850 20 48 11.5 1450 13 1700 17.5 2300 5000K 80 70,000 PSVXE1E0 Damp
Integrated 4ft Value Glass Tubes (operates on Instant Start or Program Start Ballast)
T8 G13 14 34283 LED14ET8/G/4/830 20 48 15 1700 17 2050 23 2700 3000K 80 50,000 P8P45K7K Damp
G13 14 34289 LED14ET8/G/4/835 20 48 15 1700 17 2050 23 2700 3500K 80 50,000 PKO4WU91 Damp
G13 14 34291 LED14ET8/G/4/840 20 48 15 1750 17 2100 23 2750 4000K 80 50,000 PLVH468G Damp
G13 14 34300 LED14ET8/G/4/850 20 48 15 1750 17 2100 23 2750 5000K 80 50,000 P1XYY7L6 Damp
G13 11 93107390 LED11ET8/G/4/830 20 48 12.5 1450 14 1700 19 2300 3000K 80 50,000 - Damp
G13 11 93107391 LED11ET8/G/4/835 20 48 12.5 1450 14 1700 19 2300 3500K 80 50,000 PTB81YWO Damp
G13 11 93107392 LED11ET8/G/4/840 20 48 12.5 1450 14 1700 19 2300 4000K 80 50,000 PTIWPW1J Damp
G13 11 93107393 LED11ET8/G/4/850 20 48 12.5 1450 14 1700 19 2300 5000K 80 50,000 PZ9A65MO Damp
Integrated 3ft Glass Tubes (operates on Instant Start or Program Start Ballast)
T8 G13 10.5 35783 LED11ET8/G/3/830 20 36 11.5 1350 13 1600 18 2150 3000K 80 70,000 PCEIN3O5 Damp
G13 10.5 35784 LED11ET8/G/3/835 20 36 11.5 1350 13 1600 18 2150 3500K 80 70,000 PL2XF8BQ Damp
G13 10.5 35788 LED11ET8/G/3/840 20 36 11.5 1350 13 1600 18 2150 4000K 80 70,000 PFERF8MX Damp
G13 10.5 35789 LED11ET8/G/3/850 20 36 11.5 1400 13 1650 18 2250 5000K 80 70,000 PQKLCP9K Damp
Integrated 2ft Glass Tubes (operates on Instant Start or Program Start Ballast)
T8 G13 8.5 35775 LED8ET8/G/2/830 20 24 9.5 1200 11 1350 15 1850 3000K 80 70,000 - Damp
G13 8.5 35776 LED8ET8/G/2/835 20 24 9.5 1200 11 1350 15 1850 3500K 80 70,000 PJDHZYEY Damp
G13 8.5 35778 LED8ET8/G/2/840 20 24 9.5 1200 11 1350 15 1850 4000K 80 70,000 P557S4DE Damp
G13 8.5 35779 LED8ET8/G/2/850 20 24 9.5 1200 11 1400 15 1950 5000K 80 70,000 PU5UYRCN Damp

Metric Integrated Glass Tubes - Type A

Low Ballast Factor Normal Ballast Factor High Ballast Factor
Color
Bulb Base Lamp Order Carton MOL System Lumens System Lumens System Lumens Temp Rated Life DLC® Location Additional
Shape Type Watts5 Code Description Qty2 (in) Watts (Initial) Watts (Initial) Watts (Initial) (Initial) CRI L70 (Hrs)1 ID4 Rating3 Information
Metric Integrated Glass Tubes (operates on Instant Start or Program Start Ballast)
T8 G13 14 93312131 LED14ET8/G/835/METRIC 20 45.67 15 1700 17 2050 23 2700 3500K 80 50,000 - Damp
G13 14 93312133 LED14ET8/G/840/METRIC 20 45.67 15 1750 17 2100 23 2750 4000K 80 50,000 - Damp

Integrated Plastic Tubes - Type A

Low Ballast Factor Normal Ballast Factor High Ballast Factor
Color
Bulb Base Lamp Order Carton MOL System Lumens System Lumens System Lumens Temp Rated Life Location Additional
Shape Type Watts5 Code Description Qty2 (in) Watts (Initial) Watts (Initial) Watts (Initial) (Initial) CRI L70 (Hrs)1 DLC® ID4 Rating3 Information
Integrated U6 Plastic Tubes (operates on Instant Start or Program Start Ballast)
T8-U6 2G13 13 43120 LED13ET8/U6/830 12 22.5 13 1500 15 1800 20.5 2400 3000K 80 50,000 P4CDITRI Damp
2G13 13 43125 LED13ET8/U6/835 12 22.5 13 1550 15 1850 20.5 2450 3500K 80 50,000 PFX71YXR Damp
2G13 13 43129 LED13ET8/U6/840 12 22.5 13 1600 15 1900 20.5 2500 4000K 80 50,000 PTEX0PXE Damp
2G13 13 43130 LED13ET8/U6/850 12 22.5 13 1600 15 1900 20.5 2500 5000K 80 50,000 PSF41B80 Damp
LED Lamps - Tubes

1
The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original lumen output (L70)
2
Minimum order quantity = Carton Qty
3
UL 1993 Environmental Requirements for LED LAMPS
Damp Location – Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment, including partially protected locations
4
Not all product variations on this page are DLC qualified. Visit qpl.designlights.org/solid-state-lighting to confirm qualification.
5
Bare lamp wattage operated on Normal Ballast Factor. Measured performance on Low (0.78), Normal (0.88) and High (1.18) Ballast Factors is provided for reference. Performance may vary depending on ballast model and age.
Check ballast compatibility at www.LED.com/LEDTUBES-ballast-compatibility.

14 – www.LED.com/Lamps
LED Lamps - Tubes - Type A
Integrated covRguard® Plastic Sleeved Glass Tubes - Type A
Low Ballast Factor Normal Ballast Factor High Ballast Factor
Color
Bulb Base Lamp Order Carton MOL System Lumens System Lumens System Lumens Temp Rated Life Location Additional
Shape Type Watts5 Code Description Qty2 (in) Watts (Initial) Watts (Initial) Watts (Initial) (Initial) CRI L70 (Hrs)1 DLC® ID4 Rating3 Information
Integrated 4ft covRguard® Plastic Sleeved Glass Tubes (operates on Instant Start or Program Start Ballast)
T8 G13 18 93135924 LED18ET8/G/4/830CVG 20 48 17 2050 20 2450 26 3200 3000K 80 70,000 PWZVF5VO Damp NSF Food Zone
G13 18 93135946 LED18ET8/G/4/835CVG 20 48 17 2100 20 2500 26 3250 3500K 80 70,000 PF5EUKL2 Damp NSF Food Zone
G13 18 93135947 LED18ET8/G/4/840CVG 20 48 17 2100 20 2500 26 3250 4000K 80 70,000 PSKVG35W Damp NSF Food Zone
G13 18 93135948 LED18ET8/G/4/850CVG 20 48 17 2150 20 2600 26 3400 5000K 80 70,000 P65JROO4 Damp NSF Food Zone
G13 15 93135823 LED15ET8/G/4/835CVG 20 48 15 1850 17 2200 23 2950 3500K 80 70,000 PYIS7JSD Damp NSF Food Zone
G13 15 93135824 LED15ET8/G/4/840CVG 20 48 15 1850 17 2200 23 2950 4000K 80 70,000 PPXC7238 Damp NSF Food Zone
G13 15 93135846 LED15ET8/G/4/850CVG 20 48 15 1900 17 2250 23 3000 5000K 80 70,000 PU8LNXAM Damp NSF Food Zone
G13 10 93135714 LED10ET8/G/4/835CVG 20 48 11.5 1400 13 1600 17.5 2150 3500K 80 70,000 PUCLMBOV Damp NSF Food Zone
G13 10 93135715 LED10ET8/G/4/840CVG 20 48 11.5 1400 13 1600 17.5 2150 4000K 80 70,000 PUW18WQG Damp NSF Food Zone
G13 10 93135716 LED10ET8/G/4/850CVG 20 48 11.5 1400 13 1650 17.5 2250 5000K 80 70,000 PI7FRGBP Damp NSF Food Zone
Integrated 3ft covRguard® Plastic Sleeved Glass Tubes (operates on Instant Start or Program Start Ballast)
T8 G13 10.5 93135659 LED11ET8/G/3/835CVG 20 36 11.5 1350 13 1600 18 2150 3500K 80 70,000 PSBVQAZE Damp NSF Food Zone
G13 10.5 93135660 LED11ET8/G/3/840CVG 20 36 11.5 1350 13 1600 18 2150 4000K 80 70,000 P5QTVCPX Damp NSF Food Zone
G13 10.5 93135661 LED11ET8/G/3/850CVG 20 36 11.5 1400 13 1650 18 2250 5000K 80 70,000 PJ78M875 Damp NSF Food Zone
Integrated 2ft covRguard® Plastic Sleeved Glass Tubes (operates on Instant Start or Program Start Ballast)
T8 G13 8.5 93135655 LED8ET8/G/2/835CVG 20 24 9.5 1200 11 1350 15 1850 3500K 80 70,000 PVDR8UFU Damp NSF Food Zone
G13 8.5 93135656 LED8ET8/G/2/840CVG 20 24 9.5 1200 11 1350 15 1850 4000K 80 70,000 PDP040JM Damp NSF Food Zone
G13 8.5 93135657 LED8ET8/G/2/850CVG 20 24 9.5 1200 11 1350 15 1850 5000K 80 70,000 P0Y2CIVW Damp NSF Food Zone

Integrated PET Plastic Coated Glass Tubes - Type A

Low Ballast Factor Normal Ballast Factor High Ballast Factor
Color
Bulb Base Lamp Order Carton MOL System Lumens System Lumens System Lumens Temp Rated Life Location Additional
Shape Type Watts5 Code Description Qty2 (in) Watts (Initial) Watts (Initial) Watts (Initial) (Initial) CRI L70 (Hrs)1 DLC® ID4 Rating3 Information
Integrated 4ft PET Plastic Coated Glass Tubes (operates on Instant Start or Program Start Ballast)
T8 G13 14 93107394 LED14ET8/G4/830CT 20 48 15 1700 17 2050 23 2700 3000K 80 50,000 - Damp NSF Splash Zone
G13 14 93107506 LED14ET8/G4/835CT 20 48 15 1700 17 2050 23 2700 3500K 80 50,000 PG06MMSK Damp NSF Splash Zone
G13 14 93107507 LED14ET8/G4/840CT 20 48 15 1750 17 2100 23 2750 4000K 80 50,000 PI234OJJ Damp NSF Splash Zone
G13 14 93107510 LED14ET8/G4/850CT 20 48 15 1750 17 2100 23 2750 5000K 80 50,000 PJ6AUR4D Damp NSF Splash Zone

LED Lamps - Tubes

1
The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original lumen output (L70)
2
Minimum order quantity = Carton Qty
3
UL 1993 Environmental Requirements for LED LAMPS
Damp Location – Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment, including partially protected locations
4
Not all product variations on this page are DLC qualified. Visit qpl.designlights.org/solid-state-lighting to confirm qualification.
5
Bare lamp wattage operated on Normal Ballast Factor. Measured performance on Low (0.78), Normal (0.88) and High (1.18) Ballast Factors is provided for reference. Performance may vary depending on ballast model and age.
Check ballast compatibility at www.LED.com/LEDTUBES-ballast-compatibility.

www.LED.com/Lamps – 15
 LED Lamps - Tubes - Type A
Integrated Glass Tubes - Type A - T5
System Color
Bulb Base Lamp Order Carton MOL Watts Lumens Temp. Rated Life Location
Shape Type Watts5 Code Description Qty2 (In) (BF=1.0) (Initial) (Initial) CRI L70 (Hrs)1 DLC® ID4 Rating3 Additional Information
Integrated 4ft T5 HO Glass Tubes (operates on T5 Ballast)
T5 G5 25.5 19203 LED26ET5/G/4/830 20 46 32 3650 3000K 80 50,000 PWNBNEB9 Damp Requires T5 HO Ballast
G5 25.5 19221 LED26ET5/G/4/835 20 46 32 3750 3500K 80 50,000 POB2VN8V Damp Requires T5 HO Ballast
G5 25.5 19227 LED26ET5/G/4/840 20 46 32 3800 4000K 80 50,000 PUS7DGWC Damp Requires T5 HO Ballast
G5 25.5 19348 LED26ET5/G/4/850 20 46 32 3900 5000K 80 50,000 P99UF0I0 Damp Requires T5 HO Ballast
G5 25.5 19488 LED26ET5/G/4/865 20 46 32 3800 6500K 80 50,000 - Damp Requires T5 HO Ballast
Integrated 2ft T5 HO Glass Tubes (operates on T5 Ballast)
T5 G5 11 34413 LED11ET5/G/2/830 20 22 13.5 1500 3000K 80 50,000 - Damp Requires T5 HO Ballast
G5 11 34417 LED11ET5/G/2/835 20 22 13.5 1550 3500K 80 50,000 - Damp Requires T5 HO Ballast
G5 11 34418 LED11ET5/G/2/840 20 22 13.5 1600 4000K 80 50,000 - Damp Requires T5 HO Ballast
G5 11 34424 LED11ET5/G/2/850 20 22 13.5 1600 5000K 80 50,000 - Damp Requires T5 HO Ballast
Integrated 4ft T5 HE Glass Tubes (operates on T5 Ballast)
T5 G5 13 34351 LED13ET5G4/830HE 20 46 16 1900 3000K 80 50,000 P3D2AHME Damp Requires T5 HE Ballast
G5 13 34354 LED13ET5G4/835HE 20 46 16 1950 3500K 80 50,000 P9QL3V95 Damp Requires T5 HE Ballast
G5 13 34355 LED13ET5G4/840HE 20 46 16 2000 4000K 80 50,000 PIN820KS Damp Requires T5 HE Ballast
G5 13 34367 LED13ET5G4/850HE 20 46 16 2000 5000K 80 50,000 PXRH4DM6 Damp Requires T5 HE Ballast
Integrated 3ft T5 HE Glass Tubes (operates on T5 Ballast)
T5 G5 10 34371 LED10ET5G3/830HE 20 34 13 1500 3000K 80 50,000 - Damp Requires T5 HE Ballast
G5 10 34376 LED10ET5G3/835HE 20 34 13 1550 3500K 80 50,000 - Damp Requires T5 HE Ballast
G5 10 34401 LED10ET5G3/840HE 20 34 13 1600 4000K 80 50,000 - Damp Requires T5 HE Ballast
G5 10 34402 LED10ET5G3/850HE 20 34 13 1600 5000K 80 50,000 - Damp Requires T5 HE Ballast
Integrated 2ft T5 HE Glass Tubes (operates on T5 Ballast)
T5 G5 7 34403 LED7ET5/G2/830HE 20 22 10 1000 3000K 80 50,000 - Damp Requires T5 HE Ballast
G5 7 34404 LED7ET5/G2/835HE 20 22 10 1100 3500K 80 50,000 - Damp Requires T5 HE Ballast
G5 7 34411 LED7ET5/G2/840HE 20 22 10 1150 4000K 80 50,000 - Damp Requires T5 HE Ballast
G5 7 34412 LED7ET5/G2/850HE 20 22 10 1150 5000K 80 50,000 - Damp Requires T5 HE Ballast
LED Lamps - Tubes

1
The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original lumen output (L70)
2
Minimum order quantity = Carton Qty
3
UL 1993 Environmental Requirements for LED LAMPS
Damp Location – Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment, including partially protected locations
4
Not all product variations on this page are DLC qualified. Visit qpl.designlights.org/solid-state-lighting to confirm qualification.
5
Bare lamp wattage operated on T5 Ballasts. Measured performance on T5 ballasts (Ballast Factor = 1.0) is provided for reference. Performance may vary depending on ballast model and age.
Check ballast compatibility at www.LED.com/LEDTUBES-ballast-compatibility.

16 – www.LED.com/Lamps
LED Lamps - Tubes - Type A+B
Dual Mode Glass Tubes - Type A+B

GE Type A+B Tubes offer the flexibility to be used in either Type A (ballast driven) or Type B (ballast bypass)
applications. The notes about each separate Type apply. Type A+B Tubes might be installed as Type A and then
when the ballast fails or if it is found to be incompatible, switched to Type B. To use Type A+B lamps as Type B,
the same re-wiring process must be done as for Type B lamps.

TYPE A MODE TYPE B MODE

Low Ballast Normal Ballast High Ballast

Factor Factor Factor
Color Rated
Bulb Base Lamp Order Carton MOL System Lumens System Lumens System Lumens Input Lumens Power Temp. Life L70 Location
Shape Type Watts5 Code Description Qty 2
(in) Watts (Initial) Watts (Initial) Watts (Initial) Voltage Watts (Initial) Factor CRI (Initial) (Hrs)1 DLC® ID4 Rating3
Dual Mode 4ft Glass Tubes (Type A+B)

T8 G13 13 93138405 LED13ABT8/G4/830 25 48 14 1600 15.5 1850 N/A N/A 120-277 13 1850 >0.9 80 3000K 50,000 PL3500YGQM9I Damp

G13 13 93138426 LED13ABT8/G4/835 25 48 14 1650 15.5 1900 N/A N/A 120-277 13 1900 >0.9 80 3500K 50,000 PLCROKN6TTQ1 Damp

G13 13 93138429 LED13ABT8/G4/840 25 48 14 1700 15.5 1950 N/A N/A 120-277 13 1950 >0.9 80 4000K 50,000 PLC02LUI5ZEL Damp

G13 13 93138430 LED13ABT8/G4/850 25 48 14 1700 15.5 1950 N/A N/A 120-277 13 1950 >0.9 80 5000K 50,000 PLFHM4HMHPY7 Damp

LED Lamps - Tubes

1
The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original lumen output (L70)
2
Minimum order quantity = Carton Qty
3
UL 1993 Environmental Requirements for LED LAMPS
Damp Location – Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment, including partially protected locations
4
Not all product variations on this page are DLC qualified. Visit qpl.designlights.org/solid-state-lighting to confirm qualification.
5
Bare lamp wattage operated on Normal Ballast Factor. Measured performance on Low (0.78), Normal (0.88) and High (1.18) Ballast Factors is provided for reference. Performance may vary depending on ballast model and age.
Check ballast compatibility at www.LED.com/LEDTUBES-ballast-compatibility.

www.LED.com/Lamps – 17
 LED Lamps - Tubes - Type B
LED Tubes - Type B

GE Type B LED Tubes offer a simple long-term solution for linear applications. The fixture is re-wired to bypass
the ballast, taking mains voltage directly to the lampholders. This eliminates the ballast as a potential failure
point, eliminates the ballast energy consumption and reduces future maintenance. GE Type B LED Tubes have
multiple safety features designed into the lamp. Current also offers an external misapplication fuse kit for added
protection and peace of mind.

Glass tubes with internal diffusion

coating provide stability over time
and wide light distribution

Internal driver converts

mains voltage to voltage
and current used by LEDs

LED Tube dimensions conform to ANSI

specs for linear fluorescent lamps

Internal Misapplication Switch

designed to mitigate risk if Type B
Tube is installed before fixture is rewired
Internal Safety Switch
prevents current from flowing until
both ends of LED Tube are engaged
with sockets
LED Lamps - Tubes

18 – www.LED.com/Lamps
LED Lamps - Tubes - Type B
Catalog Logic:

Bulb Shape:
Bulb shape
followed by
its size (the
maximum
diameter
of the bulb Lumens: Rated Life L70:
expressed Watts: MOL (in):
Light output (as defined by FTC Lamp Hours of operation the lamp will provide before
in eighths of Energy Used (as Maximum Overall
Label Rules) reaching 70% of its original lumen output
an inch) defined by FTC Length in inches
Description:
Lamp Label Rules) Color Temperature (K): Power Factor:
Lamp Model
A measure of the visual "warmth" or A measure of the phase difference
Description
"coolness" of the light from the lamp. between voltage and current drawn by
Order Code: The higher the value, the whiter or an electrical device
Use the order Carton Quantity: "cooler" the light appears.
DLC:
code when Number of lamps
Indicates whether product is listed
ordering to packed in a carton Color Rendering Index (CRI or R): on the DesignLights Consortium®
Base Type: ensure that An indication of the ability of the Qualified Products List
ANSI Base you receive the Volts: lamp to render object colors in a
exact product Lamp data Location Rating:
normal, natural way. The higher the
you require is based on Location Rating as defined for LED
number (0-100), the better the color
operation at Lamps by UL 1993
appearance.
rated voltage Additional Information:
Typical application and/or
other important information

Color Rated
Bulb Base Carton MOL Lumens Temp. Life L70 Power Location
Shape Type Watts Order Code Description Volts Qty2 (in) (Initial) (Initial) CRI (Hrs)1 Factor DLC®4 Rating3 Additional Information
Ballast Bypass - 4ft Glass Tubes
T8 G13 14 39498 LED14BDT8/G4/840 120-277 20 48 1800 4000K 80 50,000 >0.9 Yes Damp

LED14BDT8/G/4/840
CCT (40 = 4000K)
Wattage CRI (8 = 80)
"G" indicates
Glass tube Length in feet
BD = Type B, Double-ended
(power to both ends -
L to one, N to the other) Bulb Shape

LED Lamps - Tubes

www.LED.com/Lamps – 19
 original

LED Lamps - Tubes - Type B

LumenChoice
Current / SpectraChoice
offers unmatched revB 082222
flexibility in a single Type LED Tube. v1
Select wattage and color temperature at the flick of a switch.

LumenChoice® + SpectraChoice™ Selectable LED Tubes maximize the potential to reduce inventory and
streamline product lists. These lamps allow installers to react to a wide variety of needs, providing the ability to
LumenChoice / SpectraChoice rev 082222 v1
adjust both the color temperature of the light and the brightness.

But what about when it's known a site prefers 4000K? LumenChoice® Selectable LED Tubes can be used to
optimize the light levels throughout a facility with just one SKU. Reducing the wattage can save more energy
and improve the comfortability of overlit spaces.

LumenChoice / SpectraChoice rev 082222 v1

LumenChoice®
Make lumen/wattage selections
LumenChoice / SpectraChoice
LumenChoice
Optimize rev
® 082222 v1
light levels and power
easily at any time with integratedLumenCh
consumption instantly, maximizing
switch, no tools required
energy savings immediately

LumenChoice ®
+
SpectraChoice
LumenChoice SpectraChoice ™
SpectraC
LumenCh ®™

SpectraChoice™ Make color temperature selections

SpectraChoice
LumenChoice
Match the color of lighting +
®™ easily at any time with integrated
switch, no tools required
SpectraC
LumenCh
across a facility or choose to
SpectraChoice
change the aesthetic of a space ™ SpectraC
LumenChoice ®+ LumenCh
SpectraChoice™ SpectraC
LED Lamps - Tubes

20 – www.LED.com/Lamps
LED Lamps - Tubes - Type B
Ballast Bypass Selectable LumenChoice® + SpectraChoice™ Glass Tubes - Double Ended - Type B
Selectable Selectable
Bulb Base Selectable Order Carton MOL Lumens Color Temp. Rated Life Power Location
Shape Type Watts* Code Description Volts Qty2 (in) (Initial)5 (Initial)* CRI L70 (Hrs)1 Factor DLC® ID4 Rating3 Additional Information
Ballast Bypass (Type B) - 4ft Glass Tubes

8 1100 3500K
T8 G13 12* 93301824 LEDLCBDT8/G4/8SC 120-277 20 48 1600* 4000K* 80 70,000 >0.9 S-3Q0BDP Damp
16 2000 5000K

3000K
10 1650
3500K
T8 G13 13* 93313525 LEDLCBDT8/G4/8SCXL/120-347 120-347 20 48 2050* 80 70,000 >0.9 - Damp
4000K*
16 2550
5000K
Ballast Bypass (Type B) - 3ft Glass Tubes
3000K
10 1400
3500K
T8 G13 12* 93313565 LEDLCBDT8/G3/8SC/120-347 120-347 20 36 1650* 80 70,000 >0.9 - Damp
4000K*
14 1800
5000K
Ballast Bypass (Type B) - 2ft Glass Tubes
3000K
7 950
3500K
T8 G13 9* 93313567 LEDLCBDT8/G2/8SC/120-347 120-347 20 24 1150* 80 70,000 >0.9 - Damp
4000K*
11 1350
5000K

Ballast Bypass Selectable LumenChoice® Glass Tubes - Double Ended - Type B

Selectable
Bulb Base Selectable Order Carton MOL Lumens Color Temp. Rated Life Power Location
Shape Type Watts* Code Description Volts Qty2 (in) (Initial)5 (Initial) CRI L70 (Hrs)1 Factor DLC® ID4 Rating3 Additional Information
Ballast Bypass (Type B) - 4ft Glass Tubes

8 1100
T8 G13 12* 93301783 LEDLCBDT8/G4/840 120-277 20 48 1600* 4000K 80 70,000 >0.9 S-Z2H9M3 Damp
16 2000

Ballast Bypass Selectable SpectraChoice™ Glass Tubes - Double Ended - Type B

Selectable
Bulb Base Order Carton MOL Lumens Color Temp. Rated Life Power Location
Shape Type Watts Code Description Volts Qty2 (in) (Initial)5 (Initial)* CRI L70 (Hrs)1 Factor DLC® ID4 Rating3 Additional Information
Ballast Bypass (Type B) - 4ft Glass Tubes
3000K
3500K
T8 G13 16 93313519 LED16BDT8/G4/8SCXL/120-347 120-347 20 48 2550 80 70,000 >0.9 - Damp
4000K*
5000K
3000K
3500K
T8 G13 13 93313501 LED13BDT8/G4/8SCXL/120-347 120-347 20 48 2050 80 70,000 >0.9 - Damp
4000K*
5000K
3000K
3500K
T8 G13 10 93313483 LED10BDT8/G4/8SCXL/120-347 120-347 20 48 1650 80 70,000 >0.9 - Damp
4000K*
5000K

LED Lamps - Tubes

1
The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original lumen output (L70)
2
Minimum order quantity from Current = Case Qty
3
UL 1993 Environmental Requirements for LED LAMPS
Damp Location – Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment, including partially protected locations
4
Visit qpl.designlights.org/solid-state-lighting to confirm qualification.
5
Lumen levels correspond with wattage levels and represent 4000K setting.
* Default wattage and color temperature settings noted by “*” in tables above. Lumen levels correspond with wattage levels. Color temperature levels are independent of wattage & lumens.

www.LED.com/Lamps – 21
 LED Lamps - Tubes - Type B
Ballast Bypass Glass Tubes - Double Ended - Type B
Color Rated
Bulb Base Carton MOL Lumens Temp. Life L70 Power Location
Shape Type Watts Order Code Description Volts Qty2 (in) (Initial) (Initial) CRI (Hrs)1 Factor DLC® ID4 Rating3 Additional Information
Ballast Bypass - 8ft Glass Tubes
T8 R17d 43 93132591 LED43BDT8/G8/835 120-277 20 96 5000 3500K 80 50,000 >0.9 - Damp
R17d 43 93132592 LED43BDT8/G8/840 120-277 20 96 5500 4000K 80 50,000 >0.9 - Damp
R17d 43 93132593 LED43BDT8/G8/850 120-277 20 96 5500 5000K 80 50,000 >0.9 - Damp
Fa8 34 93122170 LED34BDT8/G/8/830 120-277 20 96 4000 3000K 80 50,000 >0.9 PLAZBRBXAMGI Damp
Fa8 34 93122171 LED34BDT8/G/8/835 120-277 20 96 4000 3500K 80 50,000 >0.9 PL8W5U9U2C38 Damp
Fa8 34 93122172 LED34BDT8/G/8/840 120-277 20 96 4400 4000K 80 50,000 >0.9 PL9PNC3HLQNR Damp
Fa8 34 93122174 LED34BDT8/G/8/850 120-277 20 96 4400 5000K 80 50,000 >0.9 PLXKM0YJFS3Q Damp
Ballast Bypass - 4ft XL Glass Tubes
T8 G13 16 93132587 LED16BDT8/G4/835XL 120-277 20 48 2500 3500K 80 70,000 >0.9 P7A6TEUD Damp
G13 16 93132588 LED16BDT8/G4/840XL 120-277 20 48 2550 4000K 80 70,000 >0.9 P32UZP06 Damp
G13 16 93132589 LED16BDT8/G4/850XL 120-277 20 48 2550 5000K 80 70,000 >0.9 PI7ZR2DY Damp
G13 13 93132552 LED13BDT8/G4/830XL 120-277 20 48 1950 3000K 80 70,000 >0.9 P20SWP4R Damp
G13 13 93132553 LED13BDT8/G4/835XL 120-277 20 48 2000 3500K 80 70,000 >0.9 PY58DIYY Damp
G13 13 93132554 LED13BDT8/G4/840XL 120-277 20 48 2050 4000K 80 70,000 >0.9 PN3DG2KK Damp
G13 13 93132555 LED13BDT8/G4/850XL 120-277 20 48 2050 5000K 80 70,000 >0.9 P33RC00B Damp
G13 9.5 93132549 LED9BDT8/G4/835XL 120-277 20 48 1600 3500K 80 70,000 >0.9 PP3H2D0T Damp
G13 9.5 93132550 LED9BDT8/G4/840XL 120-277 20 48 1650 4000K 80 70,000 >0.9 PE3WWYH0 Damp
G13 9.5 93132551 LED9BDT8/G4/850XL 120-277 20 48 1650 5000K 80 70,000 >0.9 P4X8QYGU Damp
Ballast Bypass - 4ft Glass Tubes
T8 G13 16 93123476 LED16BDT8/G4/830 120-277 20 48 2100 3000K 80 50,000 >0.9 P9U8R2XF Damp
G13 16 93125618 LED16BDT8/G4/835 120-277 20 48 2150 3500K 80 50,000 >0.9 PW61S4V8 Damp
G13 16 93125620 LED16BDT8/G4/840 120-277 20 48 2200 4000K 80 50,000 >0.9 PLWETXLG Damp
G13 16 93125622 LED16BDT8/G4/850 120-277 20 48 2200 5000K 80 50,000 >0.9 P9DPDUA6 Damp
G13 14 39493 LED14BDT8/G4/830 120-277 20 48 1700 3000K 80 50,000 >0.9 PQJU40YO Damp
G13 14 39494 LED14BDT8/G4/835 120-277 20 48 1750 3500K 80 50,000 >0.9 PE7DNV4V Damp
G13 14 39498 LED14BDT8/G4/840 120-277 20 48 1800 4000K 80 50,000 >0.9 PFXFRIB9 Damp
G13 14 39519 LED14BDT8/G4/850 120-277 20 48 1850 5000K 80 50,000 >0.9 PYXSAU7Y Damp
G13 11 93117212 LED11BDT8/G4/830 120-277 20 48 1600 3000K 80 50,000 >0.9 - Damp
G13 11 93117213 LED11BDT8/G4/835 120-277 20 48 1650 3500K 80 50,000 >0.9 P1AW5I1B Damp
G13 11 93117214 LED11BDT8/G4/840 120-277 20 48 1650 4000K 80 50,000 >0.9 P3Y9GW4E Damp
G13 11 93117215 LED11BDT8/G4/850 120-277 20 48 1700 5000K 80 50,000 >0.9 P792993K Damp
Ballast Bypass - 3ft Glass Tubes
T8 G13 12 39525 LED12BDT8/G3/830 120-277 20 36 1450 3000K 80 50,000 >0.9 P7PGZZMI Damp
G13 12 39547 LED12BDT8/G3/835 120-277 20 36 1500 3500K 80 50,000 >0.9 P1DV4D7M Damp
G13 12 39554 LED12BDT8/G3/840 120-277 20 36 1550 4000K 80 50,000 >0.9 POEU7LZC Damp
G13 12 39557 LED12BDT8/G3/850 120-277 20 36 1550 5000K 80 50,000 >0.9 P1WXGHZO Damp
Ballast Bypass - 2ft Glass Tubes
T8 G13 9 39558 LED9BDT8/G2/830 120-277 20 24 1100 3000K 80 50,000 >0.9 PW6GB7O3 Damp
G13 9 39560 LED9BDT8/G2/835 120-277 20 24 1150 3500K 80 50,000 >0.9 P41DJP7N Damp
G13 9 39561 LED9BDT8/G2/840 120-277 20 24 1200 4000K 80 50,000 >0.9 P9VLH47P Damp
G13 9 39563 LED9BDT8/G2/850 120-277 20 24 1200 5000K 80 50,000 >0.9 PQJS5X3I Damp
Ballast Bypass - U1 Glass Tubes - 1-5/8" leg spacing
T8-U1 2G13 13 93107352 LED13BDT8/U/835 120-277 20 22.5 1800 3500K 80 50,000 >0.9 PUORES8O Damp 1 - 5/8" leg spacing
2G13 13 93107388 LED13BDT8/U/840 120-277 20 22.5 1850 4000K 80 50,000 >0.9 PA21GLQ2 Damp 1 - 5/8" leg spacing
2G13 13 93107389 LED13BDT8/U/850 120-277 20 22.5 1850 5000K 80 50,000 >0.9 PGEE9WIZ Damp 1 - 5/8" leg spacing
Ballast Bypass - U6 Glass Tubes - 6" leg spacing
T8-U6 2G13 13 93133049 LED13BDT8/U6/830 120-277 12 22.5 1750 3000K 80 50,000 >0.9 PEW9A1M8 Damp 6" leg spacing
2G13 13 93133050 LED13BDT8/U6/835 120-277 12 22.5 1800 3500K 80 50,000 >0.9 PUWGR50L Damp 6" leg spacing
2G13 13 93133051 LED13BDT8/U6/840 120-277 12 22.5 1850 4000K 80 50,000 >0.9 P5NYY5PI Damp 6" leg spacing
2G13 13 93133052 LED13BDT8/U6/850 120-277 12 22.5 1850 5000K 80 50,000 >0.9 PWD1ZSNP Damp 6" leg spacing
LED Lamps - Tubes

1
The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original lumen output (L70)
2
Minimum order quantity from Current = Carton Qty
3
UL 1993 Environmental Requirements for LED LAMPS
Damp Location – Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment, including partially protected locations
4
Not all product variations on this page are DLC qualified. Visit qpl.designlights.org/solid-state-lighting to confirm qualification.
* Default color temperature setting is 4000K.

22 – www.LED.com/Lamps
LED Lamps - Tubes - Type B
Ballast Bypass covRguard® Plastic Sleeved Glass Tubes - Double Ended - Type B
Color Rated
Bulb Base Carton MOL Lumens Temp. Life L70 Power Location
Shape Type Watts Order Code Description Volts Qty2 (in) (Initial) (Initial) CRI (Hrs)1 Factor DLC® ID4 Rating3 Additional Information
Ballast Bypass - 4ft covRguard® Plastic Sleeved Glass Tubes
T8 G13 16 93154588 LED16BDT8/G4/835XL/CVG 120-277 20 48 2400 3500K 80 70,000 >0.9 S-HSC8PZ Damp NSF Food Zone
G13 16 93154589 LED16BDT8/G4/840XL/CVG 120-277 20 48 2450 4000K 80 70,000 >0.9 S-KDB8N5 Damp NSF Food Zone
G13 16 93154586 LED16BDT8/G4/850XL/CVG 120-277 20 48 2450 5000K 80 70,000 >0.9 S-398H0M Damp NSF Food Zone
G13 13 93154613 LED13BDT8/G4/835XL/CVG 120-277 20 48 1900 3500K 80 70,000 >0.9 S-PTI7MQ Damp NSF Food Zone
G13 13 93154590 LED13BDT8/G4/840XL/CVG 120-277 20 48 1950 4000K 80 70,000 >0.9 S-HVKBRT Damp NSF Food Zone
G13 13 93154612 LED13BDT8/G4/850XL/CVG 120-277 20 48 1950 5000K 80 70,000 >0.9 S-7VT10C Damp NSF Food Zone
G13 9 93154615 LED9BDT8/G4/835XL/CVG 120-277 20 48 1550 3500K 80 70,000 >0.9 - Damp NSF Food Zone
G13 9 93154616 LED9BDT8/G4/840XL/CVG 120-277 20 48 1600 4000K 80 70,000 >0.9 S-DEZYC0 Damp NSF Food Zone

Ballast Bypass PET Plastic Coated Glass Tubes - Double Ended - Type B
Color Rated
Bulb Base Carton MOL Lumens Temp. Life L70 Power Location
Shape Type Watts Order Code Description Volts Qty2 (in) (Initial) (Initial) CRI (Hrs)1 Factor DLC® ID4 Rating3 Additional Information
Ballast Bypass - 4ft PET Plastic Coated Glass Tubes
T8 G13 14 93123124 LED14BDT8/G4/835CT 120-277 20 48 1750 3500K 80 50,000 >0.9 PK9D9IG0 Damp NSF Splash Zone
G13 14 93123316 LED14BDT8/G4/840CT 120-277 20 48 1750 4000K 80 50,000 >0.9 P9R85C2W Damp NSF Splash Zone
G13 14 93123317 LED14BDT8/G4/850CT 120-277 20 48 1800 5000K 80 50,000 >0.9 PZL4PN19 Damp NSF Splash Zone
G13 11 93129666 LED11BDT8/G4/840CT 120-277 20 48 1650 4000K 80 50,000 >0.9 PKJQYIAK Damp NSF Splash Zone
Ballast Bypass - 3ft LED Tube - PET Plastic Coated Glass
T8 G13 12 93154450 LED12BDT8/G3/840CT 120-277 20 36 1450 4000K 80 50,000 >0.9 S-UYXL72 Damp NSF Splash Zone
Ballast Bypass - 2ft LED Tube - PET Plastic Coated Glass
T8 G13 9 93154445 LED9BDT8/G2/840CT 120-277 20 24 1100 4000K 80 50,000 >0.9 S-K7HOSB Damp NSF Splash Zone

120-347V Ballast Bypass Glass Tubes - Double Ended - Type B

Color Rated
Bulb Base Carton MOL Lumens Temp. Life L70 Power Location
Shape Type Watts Order Code Description Volts Qty2 (in) (Initial) (Initial) CRI (Hrs)1 Factor DLC® ID4 Rating3 Additional Information
120-347V Ballast Bypass - 8ft Glass Tubes
T8 R17d 42 93309189 LED42BDT8/G8/R17d/840/120-347 120-347 20 96 5500 4000K 80 50,000 >0.9 - Damp
R17d 42 93309190 LED42BDT8/G8/R17d/850/120-347 120-347 20 96 5500 5000K 80 50,000 >0.9 - Damp
Fa8 42 93309184 LED42BDT8/G8/Fa8/835/120-347 120-347 20 96 5400 3500K 80 50,000 >0.9 S-N56DBF Damp
Fa8 42 93309185 LED42BDT8/G8/Fa8/840/120-347 120-347 20 96 5500 4000K 80 50,000 >0.9 S-J9A14Z Damp
Fa8 42 93309186 LED42BDT8/G8/Fa8/850/120-347 120-347 20 96 5500 5000K 80 50,000 >0.9 S-4FRUT9 Damp
120-347V Ballast Bypass - 4ft Glass Tubes
T8 G13 15 93150744 LED15BDT8/G4/830/120-347 120-347 20 48 2000 3000K 80 50,000 >0.9 PLEZ25LCZ18C Damp
G13 15 93150745 LED15BDT8/G4/835/120-347 120-347 20 48 2100 3500K 80 50,000 >0.9 PL3AD91YOVYI Damp
G13 15 93150774 LED15BDT8/G4/840/120-347 120-347 20 48 2200 4000K 80 50,000 >0.9 PLAVADEOC20D Damp
G13 15 93150775 LED15BDT8/G4/850/120-347 120-347 20 48 2200 5000K 80 50,000 >0.9 PLMTIE87F98F Damp
G13 11.5 93305112 LED11BDT8/G4/830/120-347 120-347 20 48 1700 3000K 80 50,000 >0.9 S-P96STW Damp
G13 11.5 93305113 LED11BDT8/G4/835/120-347 120-347 20 48 1750 3500K 80 50,000 >0.9 S-FK874T Damp
G13 11.5 93305115 LED11BDT8/G4/840/120-347 120-347 20 48 1800 4000K 80 50,000 >0.9 S-RBECUJ Damp
G13 11.5 93305116 LED11BDT8/G4/850/120-347 120-347 20 48 1800 5000K 80 50,000 >0.9 S-32DTWS Damp
120-347V Ballast Bypass - 3ft Glass Tubes
T8 G13 12 93309175 LED12BDT8/G3/830/120-347 120-347 20 36 1500 3000K 80 50,000 >0.9 S-1A830D Damp
G13 12 93309176 LED12BDT8/G3/835/120-347 120-347 20 36 1550 3500K 80 50,000 >0.9 S-XIZY0E Damp
G13 12 93309177 LED12BDT8/G3/840/120-347 120-347 20 36 1600 4000K 80 50,000 >0.9 S-4DQ73F Damp
G13 12 93309178 LED12BDT8/G3/850/120-347 120-347 20 36 1600 5000K 80 50,000 >0.9 S-CDWEX5 Damp
120-347V Ballast Bypass - 2ft Glass Tubes
T8 G13 7 93309179 LED7BDT8/G2/830/120-347 120-347 20 24 900 3000K 80 50,000 >0.9 S-Q73A5R Damp
G13 7 93309180 LED7BDT8/G2/835/120-347 120-347 20 24 925 3500K 80 50,000 >0.9 S-WVHQ2L Damp
G13 7 93309181 LED7BDT8/G2/840/120-347 120-347 20 24 950 4000K 80 50,000 >0.9 S-OL6XNA Damp
G13 7 93309182 LED7BDT8/G2/850/120-347 120-347 20 24 950 5000K 80 50,000 >0.9 S-ZTFN9K Damp
LED Lamps - Tubes

1
The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original lumen output (L70)
2
Minimum order quantity = Carton Qty
3
UL 1993 Environmental Requirements for LED LAMPS
Damp Location – Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment, including partially protected locations
4
Not all product variations on this page are DLC qualified. Visit qpl.designlights.org/solid-state-lighting to confirm qualification.

www.LED.com/Lamps – 23
 LED Lamps - Tubes - Type B
Ballast Bypass Glass Tubes - Double Ended - Type B - T5
Color Rated
Bulb Base Carton MOL Lumens Temp. Life L70 Power Location Additional Informa-
Shape Type Watts Order Code Description Volts Qty2
(in) (Initial) (Initial) CRI (Hrs)1 Factor DLC® ID4 Rating3 tion
Ballast Bypass - 4ft T5 HO Glass Tubes
T5 G5 25 93100292 LED25BDT5/G4/830 120-277 20 46 3300 3000K 80 50,000 >0.9 P1OIDI84 Damp
G5 25 93100293 LED25BDT5/G4/835 120-277 20 46 3400 3500K 80 50,000 >0.9 PNWXCFFY Damp
G5 25 93100294 LED25BDT5/G4/840 120-277 20 46 3500 4000K 80 50,000 >0.9 P56WVBL6 Damp
G5 25 93100295 LED25BDT5/G4/850 120-277 20 46 3600 5000K 80 50,000 >0.9 P95QEGYA Damp
Ballast Bypass - 3ft T5 HO Glass Tubes
T5 G5 17 93114325 LED17BDT5/G3/830 120-277 20 34 2300 3000K 80 50,000 >0.9 - Damp
G5 17 93114626 LED17BDT5/G3/835 120-277 20 34 2400 3500K 80 50,000 >0.9 - Damp
G5 17 93114629 LED17BDT5/G3/840 120-277 20 34 2500 4000K 80 50,000 >0.9 - Damp
G5 17 93114814 LED17BDT5/G3/850 120-277 20 34 2550 5000K 80 50,000 >0.9 - Damp
Ballast Bypass - 2ft T5 HO Glass Tubes
T5 G5 11 93113793 LED11BDT5/G2/830 120-277 20 22 1500 3000K 80 50,000 >0.9 - Damp
G5 11 93114322 LED11BDT5/G2/835 120-277 20 22 1550 3500K 80 50,000 >0.9 - Damp
G5 11 93114323 LED11BDT5/G2/840 120-277 20 22 1600 4000K 80 50,000 >0.9 - Damp
G5 11 93114324 LED11BDT5/G2/850 120-277 20 22 1650 5000K 80 50,000 >0.9 - Damp
Ballast Bypass - 4ft T5 HE Glass Tubes
T5 G5 14 93128354 LED14BDT5G4830HE 120-277 20 46 2050 3000K 80 50,000 >0.9 PBJIKOYW Damp
G5 14 93128355 LED14BDT5G4835HE 120-277 20 46 2100 3500K 80 50,000 >0.9 PLB3D0M0 Damp
G5 14 93128486 LED14BDT5G4840HE 120-277 20 46 2150 4000K 80 50,000 >0.9 P80DMFGU Damp
G5 14 93128487 LED14BDT5G4850HE 120-277 20 46 2150 5000K 80 50,000 >0.9 PUPW4QP0 Damp
Ballast Bypass - 3ft T5 HE Glass Tubes
T5 G5 11 93128488 LED11BDT5G3830HE 120-277 20 34 1600 3000K 80 50,000 >0.9 - Damp
G5 11 93128490 LED11BDT5G3835HE 120-277 20 34 1650 3500K 80 50,000 >0.9 - Damp
G5 11 93128491 LED11BDT5G3840HE 120-277 20 34 1700 4000K 80 50,000 >0.9 - Damp
G5 11 93128492 LED11BDT5G3850HE 120-277 20 34 1700 5000K 80 50,000 >0.9 - Damp
Ballast Bypass - 2ft T5 HE Glass Tubes
T5 G5 9 93128494 LED9BDT5G2/830HE 120-277 20 22 1250 3000K 80 50,000 >0.9 - Damp
G5 9 93128495 LED9BDT5G2/835HE 120-277 20 22 1300 3500K 80 50,000 >0.9 - Damp
G5 9 93128570 LED9BDT5G2/840HE 120-277 20 22 1350 4000K 80 50,000 >0.9 - Damp
G5 9 93128571 LED9BDT5G2/850HE 120-277 20 22 1350 5000K 80 50,000 >0.9 - Damp

Ballast Bypass covRguard® Plastic Sleeved Glass Tubes - Double Ended - Type B - T5
Color Rated
Bulb Base Carton MOL Lumens Temp. Life L70 Power Location Additional
Shape Type Watts Order Code Description Volts Qty2
(in) (Initial) (Initial) CRI (Hrs)1 Factor DLC® ID4 Rating3 Information
Ballast Bypass - 4ft covRguard® Plastic Sleeved Glass Tubes
T5 G5 25 93155904 LED25BDT5/G4/840/CVG 120-277 20 46 3400 4000K 80 50,000 >0.9 S-60DSLU Damp NSF Food Zone
G5 25 93155905 LED25BDT5/G4/850/CVG 120-277 20 46 3400 5000K 80 50,000 >0.9 S-8STF01 Damp NSF Food Zone

120-347V Ballast Bypass Glass Tubes - Double Ended - Type B - T5

Color Rated
Bulb Base Carton MOL Lumens Temp. Life L70 Power Location Additional
Shape Type Watts Order Code Description Volts Qty2 (in) (Initial) (Initial) CRI (Hrs)1 Factor DLC® ID4 Rating3 Information
120-347V Ballast Bypass - 4ft T5 HO Glass Tubes
T5 G5 25 93305599 LED25BDT5/G4/835/120-347 120-347 25 46 3400 3500K 80 50,000 >0.9 S-8Q4DEM Damp
G5 25 93305600 LED25BDT5/G4/840/120-347 120-347 25 46 3500 4000K 80 50,000 >0.9 S-HSUIZ9 Damp
G5 25 93305601 LED25BDT5/G4/850/120-347 120-347 25 46 3500 5000K 80 50,000 >0.9 S-I5AOPF Damp

Type B Tube Misapplication Fuse Kit

Current offers this fuse kit for use in Type B Tube applications for protection against future misapplication
of linear fluorescent lamps.

Order Code Description Kit Contents

LED Lamps - Tubes

39017 BT8-1AFUSEKIT 1 Fuse (1A), 1 Fuse Holder

1
The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original lumen output (L70)
2
Minimum order quantity = Carton Qty
3
UL 1993 Environmental Requirements for LED LAMPS
Damp Location – Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment, including partially protected locations
4
Not all product variations on this page are DLC qualified. Visit qpl.designlights.org/solid-state-lighting to confirm qualification.

24 – www.LED.com/Lamps
LED Lamps - Tubes - Type B

Why switch to LED Tubes?

LED Tubes are the fast and easy way to upgrade from
Linear Fluorescent to LED.
Current offers a variety of LED Tube options, so you can choose the best solution for each application.

 $ LED Lamps - Tubes

No Mercury in LED 50% Energy Reduction 2x Longer Rated Life Quick Payback

Fluorescent lamps will soon become unavailable for sale in a

number of states with upcoming legislation. Are you ready?
In an effort to regulate consumer products that contain mercury, state governments within the USA have
passed legislation that will prohibit the sale and distribution of Linear and Compact Fluorescent lamps. For
more information or to see if your state is impacted, please visit www.LED.com/lamplegislation.
www.LED.com/Lamps – 25
 LED Lamps - Tubes - Type C
LED Tubes - Type C

GE Type C LED Tubes and Drivers are the preferred LED Tube choice for applications that demand dimming,
controllability and flexibility.

GE Type C LED Tubes operate from the low voltage DC output of the drivers. The Class 2 output reduces risk of
fire and shock compared to higher voltage alternatives. The same lamp may be used with various drivers.

In addition to the lamp-driver combination flexibility, LumenChoice® drivers are field-tunable. Installers can change
the output to the lamps using built-in switches on the driver. This allows solutions to be optimized for each
application, with potential for more energy savings by reducing the output in overlit spaces.

Dimming and controllability are readily implemented using the 0-10V dimming leads from the drivers. 0-10V
dimming was common on dimming ballasts for linear fluorescent lamps, so implementation on existing systems
is straightforward. 0-10V output allows for many drivers to be controlled by one device, a practical solution for
LED Tube applications. The 0-10V dimming leads from GE Type C LED Tube drivers may also be combined with
Current wireless controls. Contact your Current sales representative for more information.

Driver wiring mimics that of instant start ballasts, making for simple installation. Each channel from the driver is
independent, so running fewer lamps than the maximum does not impact the other outputs. Running three lamps
from a four-lamp driver still provides the same output to each lamp as when four lamps are being operated.

With LumenChoice® Type C LED Tubes and Drivers, fewer SKUs can be used to address the needs of an entire
facility. The performance tables in this section show the light output from lamps at each driver wattage setting.

Catalog Logic:

Bulb Shape:
Color Rendering Index (CRI or R):
Bulb shape Order Code: An indication of the ability of the
followed by Use the order lamp to render object colors in a
its size (the code when normal natural way. The higher the
maximum ordering to number (0-100), the better the color
diameter ensure that appearance.
of the bulb you receive the Rated Life L70:
expressed exact product Hours of operation the lamp will provide before
in eighths of you require Color Temperature (K): reaching 70% of its original lumen output
an inch). A measure of the visual
"warmth" or "coolness" of
the light from the lamp.
The higher the value, the
Base Type:
whiter or "cooler" the
ANSI Base
light appears. Initial Lumens at High Wattage Settings:
Description: Lamp lumens at various wattages
Lamp Model MOL (in):
Description Maximum Overall
Length in inches Location Rating: 2- Lamp Driver: 4-Lamp Driver:
Location Rating as defined 2-Lamp Driver to be 4-Lamp Driver to be
Carton Quantity: for LED Lamps by UL 1993 used with this lamp used with this lamp
Number of lamps corresponding to the corresponding to the
packed in a carton wattages in this table wattages in this table

Color Rated Initial Lumens at High Wattage Settings:

Bulb Base Order Carton MOL Temp. Life L70 Location 4-Lamp Driver*
Shape Type Code Description Qty2 (in) (Initial) CRI (Hrs)1 DLC®4 Rating3 18W 19.5W 21W 23W* 25W* 2-Lamp Driver *Max setting is 21W
LumenChoice® 4ft Glass Tubes
LED Lamps - Tubes

T8 G13 34211 LEDT8/LC/G/4/830 20 48 3000K 80 70,000 Yes Damp 2250 2500 2650 2850 2950 21383 LED/DR/D2L/HW 21392 LED/DR/D4L/HW

LEDT8/LC/G/4/830
CCT (30 = 3000K)
Bulb Shape CRI (8 = 80)
"G" indicates
Glass tube Length in feet
LC = LumenChoice; output determined
by external driver setting

26 – www.LED.com/Lamps
LED Lamps - Tubes - Type C
Programming LumenChoice™ Drivers

Before installation, LumenChoice™ Drivers must be set to the desired output. Lumen levels corresponding to
the driver settings below are noted in the specification tables. Adjust the switches on the side of the driver to
achieve the desired performance according to the table below.
Switches
ON on drivers
LOW WATTAGE DRIVER DRIVER
DESCRIPTION PRODUCT CODE
LED/DR/D2L/LW 21378
SYSTEM 1 2 3 4 5
SWITCH CODE
WATTS
PER LAMP 1 2 3 4 5
HIGH WATTAGE DRIVER DRIVER
DESCRIPTION PRODUCT CODE
16.5
OFF OFF OFF OFF OFF LED/DR/D2L/HW 21383
ON SYSTEM SWITCH CODE
15 WATTS
PER LAMP 1 2 3 4 5
OFF OFF OFF OFF
ON
25
12
OFF OFF OFF OFF OFF
OFF OFF OFF OFF
ON
ON
23
9
OFF OFF OFF OFF
OFF OFF OFF OFF
ON
ON
21
8
OFF OFF OFF OFF
OFF OFF OFF OFF
ON

LOW WATTAGE DRIVER DRIVER 19.5

DESCRIPTION PRODUCT CODE OFF OFF OFF OFF
LED/DR/D4L/LW 21379 ON

SYSTEM SWITCH CODE 18

WATTS OFF OFF OFF OFF
PER LAMP 1 2 3 4 5
HIGH WATTAGE DRIVER DRIVER
DESCRIPTION PRODUCT CODE
16.5
OFF OFF OFF OFF OFF LED/DR/D4L/HW 21392
ON SYSTEM SWITCH CODE
15 WATTS
PER LAMP 1 2 3
OFF OFF OFF OFF
ON
21
12 NOTE:
OFF OFF OFF
LED Lamps - Tubes

OFF OFF OFF OFF THREE

ON SWITCHES ON
ON
19.5 LED/DR/D4L/HW
9
OFF OFF
OFF OFF OFF OFF
ON
ON
18
8
OFF OFF
OFF OFF OFF OFF

www.LED.com/Lamps – 27
 LED Lamps - Tubes - Type C
LumenChoice® T8 Type C LED Tube and Driver System - T8 on High Wattage Drivers
Color Rated Initial Lumens at High Wattage Settings:
Bulb Base Order Carton MOL Temp. Life L70 Location 4-Lamp Driver*
Shape Type Code Description Qty 2
(in) (Initial) CRI (Hrs)1 DLC® ID4 Rating3 18W 19.5W 21W 23W* 25W* 2-Lamp Driver *Max setting is 21W
LumenChoice® 4ft Glass Tubes
PSR166LL /
T8 G13 34211 LEDT8/LC/G/4/830 20 48 3000K 80 70,000 Damp 2250 2500 2650 2850 2950 21383 LED/DR/D2L/HW 21392 LED/DR/D4L/HW
PM4YRS96
PWN2BURT/
G13 34227 LEDT8/LC/G/4/835 20 48 3500K 80 70,000 Damp 2300 2550 2700 2900 3000 21383 LED/DR/D2L/HW 21392 LED/DR/D4L/HW
PJDU9X1I
PS9SSR7Z/
G13 34235 LEDT8/LC/G/4/840 20 48 4000K 80 70,000 Damp 2300 2550 2700 2900 3000 21383 LED/DR/D2L/HW 21392 LED/DR/D4L/HW
PFUM43BU
P21CODHU/
G13 34239 LEDT8/LC/G/4/850 20 48 5000K 80 70,000 Damp 2300 2550 2700 2900 3000 21383 LED/DR/D2L/HW 21392 LED/DR/D4L/HW
PT5ZSP9V

LumenChoice® T8 Type C LED Tube and Driver System - T8 on Low Wattage Drivers
Color Rated Initial Lumens at Low Wattage Settings:
Bulb Base Order Carton MOL Temp. Life L70 Location
Shape Type Code Description Qty2 (in) (Initial) CRI (Hrs)1 DLC® ID4 Rating3 8W 9W 12W 15W 16.5W 2-Lamp Driver 4-Lamp Driver
LumenChoice® 4ft Glass Tubes
P0I38IQ3/
T8 G13 34211 LEDT8/LC/G/4/830 20 48 3000K 80 70,000 Damp 1050 1150 1550 1900 2000 21378 LED/DR/D2L/LW 21379 LED/DR/D4L/LW
PAY71VOU
P4WWYGOA/
G13 34227 LEDT8/LC/G/4/835 20 48 3500K 80 70,000 Damp 1050 1200 1600 1950 2050 21378 LED/DR/D2L/LW 21379 LED/DR/D4L/LW
PRIHTZPW
PHSUA5K1/
G13 34235 LEDT8/LC/G/4/840 20 48 4000K 80 70,000 Damp 1050 1200 1600 1950 2050 21378 LED/DR/D2L/LW 21379 LED/DR/D4L/LW
PZEDYTZJ
PSZ6O5M1/
G13 34239 LEDT8/LC/G/4/850 20 48 5000K 80 70,000 Damp 1050 1200 1600 1950 2050 21378 LED/DR/D2L/LW 21379 LED/DR/D4L/LW
PMN7ZV5W
LumenChoice® 3ft Glass Tubes
T8 G13 36394 LEDT8/LC/G/3/830 20 36 3000K 80 70,000 P9293YKC Damp 1050 1150 1550 1900 2050 21378 LED/DR/D2L/LW 21379 LED/DR/D4L/LW
G13 36395 LEDT8/LC/G/3/835 20 36 3500K 80 70,000 PE38VSYF Damp 1050 1200 1600 1950 2100 21378 LED/DR/D2L/LW 21379 LED/DR/D4L/LW
G13 36398 LEDT8/LC/G/3/840 20 36 4000K 80 70,000 PNQOE1II Damp 1050 1200 1600 1950 2100 21378 LED/DR/D2L/LW 21379 LED/DR/D4L/LW
G13 36401 LEDT8/LC/G/3/850 20 36 5000K 80 70,000 PJSRFHTI Damp 1050 1200 1600 1950 2100 21378 LED/DR/D2L/LW 21379 LED/DR/D4L/LW
LumenChoice® 2ft Glass Tubes
T8 G13 36406 LEDT8/LC/G/2/830 20 24 3000K 80 70,000 - Damp 1000 1100 1450 21378 LED/DR/D2L/LW 21379 LED/DR/D4L/LW
G13 36408 LEDT8/LC/G/2/835 20 24 3500K 80 70,000 PDNPT2AJ Damp 1050 1200 1550 21378 LED/DR/D2L/LW 21379 LED/DR/D4L/LW
G13 36409 LEDT8/LC/G/2/840 20 24 4000K 80 70,000 PD3Q3TWL Damp 1050 1200 1550 21378 LED/DR/D2L/LW 21379 LED/DR/D4L/LW
G13 36413 LEDT8/LC/G/2/850 20 24 5000K 80 70,000 PRKG3AR4 Damp 1050 1200 1550 21378 LED/DR/D2L/LW 21379 LED/DR/D4L/LW
LumenChoice® U1 Glass Tubes - 1*5/8" leg spacing
T8-U1 2G13 28084 LED14T8/U/835 15 22.5 3500K 80 50,000 - Damp 950 1100 1550 21378 LED/DR/D2L/LW 21379 LED/DR/D4L/LW
2G13 28164 LED14T8/U/840 15 22.5 4000K 80 50,000 - Damp 950 1100 1550 21378 LED/DR/D2L/LW 21379 LED/DR/D4L/LW
LumenChoice® U6 Glass Tubes - 6" leg spacing
T8-U6 2G13 43131 LED15T8/G/U6/830 12 22.5 3000K 80 50,000 - Damp 950 1050 1450 1700 21378 LED/DR/D2L/LW 21379 LED/DR/D4L/LW
2G13 43135 LED15T8/G/U6/835 12 22.5 3500K 80 50,000 - Damp 1000 1100 1550 1800 21378 LED/DR/D2L/LW 21379 LED/DR/D4L/LW
2G13 43143 LED15T8/G/U6/840 12 22.5 4000K 80 50,000 - Damp 1000 1100 1550 1800 21378 LED/DR/D2L/LW 21379 LED/DR/D4L/LW
2G13 43145 LED15T8/G/U6/850 12 22.5 5000K 80 50,000 - Damp 1000 1100 1550 1800 21378 LED/DR/D2L/LW 21379 LED/DR/D4L/LW

8ft T8 Type C LED Tube and Driver System - T8 on 36W Driver

Color Rated
Bulb Base Order Carton MOL Temp. Life L70 Location
Shape Type Code Description Qty2 (in) (Initial) CRI (Hrs)1 DLC® ID4 Rating3 Input Watts per Lamp Lumens (Initial) 2-Lamp Driver
LumenChoice® 8ft Glass Tubes
T8 Fa8 62327 LED36T8/G/8/835 20 96 3500K 80 50,000 PZEBFURM Damp 36 4400 63126 LED36T8/DR/D2L
Fa8 62329 LED36T8/G/8/840 20 96 4000K 80 50,000 P2MIT03H Damp 36 4400 63126 LED36T8/DR/D2L
Fa8 62349 LED36T8/G/8/850 20 96 5000K 80 50,000 P1U8ZD2E Damp 36 4400 63126 LED36T8/DR/D2L

Remote Drivers for Type C LED Tubes

Max. Default
Input Output 0-10V Wattage
Watts Order Input Carton Length Width Height Freq. Power Output Current Min. Max Dim- per Tube
(Max.) Code Description Voltage Qty2 (in) (in) (in) (Hz) Factor Voltage (A) Temp.1 Temp. mable Setting Additional Information
LumenChoice® Remote Drivers - Selectable Output for Type C LED Tubes
33 21378 LED/DR/D2L/LW 120-277 VAC 10 9.5 1.3 1.2 60 >0.9 26-34 VDC 0.48x2 -4° F 104° F Yes 12W Max. 2 Tubes; Class 2 Output
66 21379 LED/DR/D4L/LW 120-277 VAC 10 9.5 1.7 1.2 60 >0.9 26-34 VDC 0.48x4 -4° F 104° F Yes 12W Max. 4 Tubes; Class 2 Output
50 21383 LED/DR/D2L/HW 120-277 VAC 10 9.5 1.3 1.2 60 >0.9 26-34 VDC 0.72x2 -4° F 104° F Yes 21W Max. 2 Tubes; Class 2 Output
LED Lamps - Tubes

84 21392 LED/DR/D4L/HW 120-277 VAC 10 9.5 1.7 1.2 60 >0.9 26-34 VDC 0.62x4 -4° F 104° F Yes 21W Max. 4 Tubes; Class 2 Output
120-347V LumenChoice® Remote Drivers - Selectable Output for Type C LED Tubes
36 93313132 LED/6-18/DR/D2L 120-347 VAC 10 9.5 1.3 1.2 60 >0.9 26-34 VDC 0.53x2 -4° F 104° F Yes 12W Max. 2 Tubes; Class 2 Output
72 93313181 LED/6-18/DR/D4L 120-347 VAC 10 9.5 1.7 1.2 60 >0.9 26-34 VDC 0.53x4 -4° F 104° F Yes 12W Max. 4 Tubes; Class 2 Output
Fixed Wattage Remote Drivers for Type C LED Tubes
72 63126 LED36T8/DR/D2L 120-277 VAC 10 9.5 1.7 1.2 60 >0.9 26-34 VDC 1.06x2 -4° F 104° F Yes 36W^ Max. 2 Tubes; Class 2 Output
100 93136147 LED25T/DR/D4L 120-277 VAC 10 16.7 1.7 1.2 60 >0.9 26-34 VDC 0.72x4 -4° F 104° F Yes 25W^ Max. 4 Tubes; LED Class 2 Output
^
Fixed Wattage Driver - no wattage adjustment
1
The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original lumen output (L70)
2
Minimum order quantity = Carton Qty
3
UL 1993 Environmental Requirements for LED LAMPS
Damp Location – Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment, including partially protected locations
4
Not all product variations on this page are DLC qualified. Visit qpl.designlights.org/solid-state-lighting to confirm qualification.

28 – www.LED.com/Lamps
LED Lamps - Tubes - Type C
LumenChoice® T5 Type C LED Tube and Driver System - T5 on High Wattage Drivers
Car- Color Rated Initial Lumens at High Wattage Settings:
Bulb Base Order ton MOL Temp. Life L70 DLC® Location 4-Lamp Driver*
Shape Type Code Description Qty2 (in) (Initial) CRI (Hrs)1 ID4 Rating3 18W 19.5W 21W 23W* 25W* 2-Lamp Driver *Max setting is 21W
LumenChoice® 4ft T5 Glass Tubes
T5 G5 38926 LEDT5/LC/G/4/830 20 46 3000K 80 50,000 - Damp 2350 2500 2650 2850 3050 21383 LED/DR/D2L/HW 21392 LED/DR/D4L/HW
G5 38934 LEDT5/LC/G/4/835 20 46 3500K 80 50,000 - Damp 2400 2550 2750 2950 3150 21383 LED/DR/D2L/HW 21392 LED/DR/D4L/HW
G5 38940 LEDT5/LC/G/4/840 20 46 4000K 80 50,000 - Damp 2450 2600 2850 3050 3250 21383 LED/DR/D2L/HW 21392 LED/DR/D4L/HW
G5 38946 LEDT5/LC/G/4/850 20 46 5000K 80 50,000 - Damp 2450 2600 2850 3050 3250 21383 LED/DR/D2L/HW 21392 LED/DR/D4L/HW
LumenChoice® 3ft T5 Glass Tubes
T5 G5 38947 LEDT5/LC/G/3/830 20 34 3000K 80 50,000 - Damp 2300 2450 2600 2800 3000 21383 LED/DR/D2L/HW 21392 LED/DR/D4L/HW
G5 38948 LEDT5/LC/G/3/835 20 34 3500K 80 50,000 - Damp 2350 2500 2700 2900 3100 21383 LED/DR/D2L/HW 21392 LED/DR/D4L/HW
G5 38949 LEDT5/LC/G/3/840 20 34 4000K 80 50,000 - Damp 2400 2550 2800 3000 3200 21383 LED/DR/D2L/HW 21392 LED/DR/D4L/HW
G5 38955 LEDT5/LC/G/3/850 20 34 5000K 80 50,000 - Damp 2400 2550 2800 3000 3200 21383 LED/DR/D2L/HW 21392 LED/DR/D4L/HW

LumenChoice® T5 Type C LED Tube and Driver System - T5 on Low Wattage Drivers
Car- Color Rated Initial Lumens at Low Wattage Settings:
Bulb Base Order ton MOL Temp. Life L70 DLC® Location
Shape Type Code Description Qty2 (in) (Initial) CRI (Hrs)1 ID4 Rating3 8W 9W 12W 15W 16.5W 2-Lamp Driver 4-Lamp Driver
LumenChoice® 4ft T5 HE Glass Tubes
T5 G5 38995 LEDT5LC/G4/835HE 20 46 3500K 80 70,000 - Damp 1150 1250 1650 1950 2150 21378 LED/DR/D2L/LW 21379 LED/DR/D4L/LW
G5 38998 LEDT5LC/G4/840HE 20 46 4000K 80 70,000 - Damp 1200 1300 1700 2000 2200 21378 LED/DR/D2L/LW 21379 LED/DR/D4L/LW
G5 38999 LEDT5LC/G4/850HE 20 46 5000K 80 70,000 - Damp 1200 1300 1700 2000 2200 21378 LED/DR/D2L/LW 21379 LED/DR/D4L/LW
LumenChoice® 3ft T5 HE Glass Tubes
T5 G5 39001 LEDT5LC/G3/835HE 20 34 3500K 80 70,000 - Damp 1150 1250 1600 1950 2150 21378 LED/DR/D2L/LW 21379 LED/DR/D4L/LW
G5 39002 LEDT5LC/G3/840HE 20 34 4000K 80 70,000 - Damp 1200 1300 1650 2000 2200 21378 LED/DR/D2L/LW 21379 LED/DR/D4L/LW
G5 39003 LEDT5LC/G3/850HE 20 34 5000K 80 70,000 - Damp 1200 1300 1650 2000 2200 21378 LED/DR/D2L/LW 21379 LED/DR/D4L/LW
LumenChoice® 2ft T5 Glass Tubes
T5 G5 38968 LEDT5/LC/G/2/830 20 22 3000K 80 70,000 - Damp 1000 1200 1550 1800 2000 21378 LED/DR/D2L/LW 21379 LED/DR/D4L/LW
G5 38980 LEDT5/LC/G/2/835 20 22 3500K 80 70,000 - Damp 1050 1200 1600 1850 2050 21378 LED/DR/D2L/LW 21379 LED/DR/D4L/LW
G5 38983 LEDT5/LC/G/2/840 20 22 4000K 80 70,000 - Damp 1100 1250 1650 1900 2100 21378 LED/DR/D2L/LW 21379 LED/DR/D4L/LW
G5 38992 LEDT5/LC/G/2/850 20 22 5000K 80 70,000 - Damp 1100 1250 1650 1900 2100 21378 LED/DR/D2L/LW 21379 LED/DR/D4L/LW

4ft T5 Type C LED Tube and Driver System - T5 on 25W Driver

Color
Bulb Base Order Carton Temp. Rated Life Location Input Watts Lumens
Shape Type Code Description Qty2 MOL (in) (Initial) CRI L70 (Hrs)1 DLC® ID4 Rating3 per Lamp (Initial) 4-Lamp Driver
LumenChoice® 4ft Glass Tubes
T5 G5 38926 LEDT5/LC/G/4/830 20 46 3000K 80 50,000 S-6PMWAG Damp 25 3050 93136147 LED25T/DR/D4L
G5 38934 LEDT5/LC/G/4/835 20 46 3500K 80 50,000 S-AOB1TF Damp 25 3150 93136147 LED25T/DR/D4L
G5 38940 LEDT5/LC/G/4/840 20 46 4000K 80 50,000 S-SBR6H9 Damp 25 3250 93136147 LED25T/DR/D4L
G5 38946 LEDT5/LC/G/4/850 20 46 5000K 80 50,000 S-3QCBFR Damp 25 3250 93136147 LED25T/DR/D4L

4ft T5 Type C LED Tube and Driver System - T5 on 36W Driver

Color
Bulb Base Order Carton Temp. Rated Life Location Input Watts Lumens
Shape Type Code Description Qty2 MOL (in) (Initial) CRI L70 (Hrs)1 DLC® ID4 Rating3 per Lamp (Initial) 2-Lamp Driver
LumenChoice® 4ft Glass Tubes
T5 G5 38926 LEDT5/LC/G/4/830 20 46 3000K 80 50,000 PZ65QG10 Damp 36 4300 63126 LED36T8/DR/D2L
G5 38934 LEDT5/LC/G/4/835 20 46 3500K 80 50,000 PTKZGZ6H Damp 36 4350 63126 LED36T8/DR/D2L
G5 38940 LEDT5/LC/G/4/840 20 46 4000K 80 50,000 PLE4IIAM Damp 36 4400 63126 LED36T8/DR/D2L
G5 38946 LEDT5/LC/G/4/850 20 46 5000K 80 50,000 PQP7QKG8 Damp 36 4400 63126 LED36T8/DR/D2L

Remote Drivers for Type C LED Tubes

Max. Default
Input Output 0-10V Wattage
Watts Order Input Carton Length Width Height Freq. Power Output Current Min. Max Dim- per Tube
(Max.) Code Description Voltage Qty2 (in) (in) (in) (Hz) Factor Voltage (A) Temp.1 Temp. mable Setting Additional Information
LumenChoice® Remote Drivers - Selectable Output for Type C LED Tubes
33 21378 LED/DR/D2L/LW 120-277 VAC 10 9.5 1.3 1.2 60 >0.9 26-34 VDC 0.48x2 -4° F 104° F Yes 12W Max. 2 Tubes; Class 2 Output
66 21379 LED/DR/D4L/LW 120-277 VAC 10 9.5 1.7 1.2 60 >0.9 26-34 VDC 0.48x4 -4° F 104° F Yes 12W Max. 4 Tubes; Class 2 Output
50 21383 LED/DR/D2L/HW 120-277 VAC 10 9.5 1.3 1.2 60 >0.9 26-34 VDC 0.72x2 -4° F 104° F Yes 21W Max. 2 Tubes; Class 2 Output
84 21392 LED/DR/D4L/HW 120-277 VAC 10 9.5 1.7 1.2 60 >0.9 26-34 VDC 0.62x4 -4° F 104° F Yes 21W Max. 4 Tubes; Class 2 Output
LED Lamps - Tubes

120-347V LumenChoice® Remote Drivers - Selectable Output for Type C LED Tubes
36 93313132 LED/6-18/DR/D2L 120-347 VAC 10 9.5 1.3 1.2 60 >0.9 26-34 VDC 0.53x2 -4° F 104° F Yes 12W Max. 2 Tubes; Class 2 Output
72 93313181 LED/6-18/DR/D4L 120-347 VAC 10 9.5 1.7 1.2 60 >0.9 26-34 VDC 0.53x4 -4° F 104° F Yes 12W Max. 4 Tubes; Class 2 Output
Fixed Wattage Remote Drivers for Type C LED Tubes
72 63126 LED36T8/DR/D2L 120-277 VAC 10 9.5 1.7 1.2 60 >0.9 26-34 VDC 1.06x2 -4° F 104° F Yes 36W^ Max. 2 Tubes; Class 2 Output
100 93136147 LED25T/DR/D4L 120-277 VAC 10 16.7 1.7 1.2 60 >0.9 26-34 VDC 0.72x4 -4° F 104° F Yes 25W^ Max. 4 Tubes; LED Class 2 Output
^
Fixed Wattage Driver - no wattage adjustment
1
The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original lumen output (L70)
2
Minimum order quantity = Carton Qty
3
UL 1993 Environmental Requirements for LED LAMPS
Damp Location – Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment, including partially protected locations
4
Not all product variations on this page are DLC qualified. Visit qpl.designlights.org/solid-state-lighting to confirm qualification.

www.LED.com/Lamps – 29
 LED Lamps - HID

30 – www.LED.com/Lamps
LED Lamps - HID
GE LED lamps for HID replacement utilize a proprietary design with active cooling, which allows for high output
from a compact size. The length and diameter match HID ANSI profiles. These lamps feature omnidirectional light
output, with similar distribution to traditional HID lamps. This enables GE LED lamps to fit in a variety of fixtures
while providing equivalent light levels to HID. All of the GE LED lamps in this category are Type B, which means the
fixture is re-wired to bypass the ballast.

Lamp Drawings (not drawn to scale)

ED17

ED23.5
ED37

ED18 ED28

ED18 ED23 .5
Recessed
Mog BiPin GU6.5 GX10
Mog
Recessed
Single Contact
Recessed
Single Contact
BiPin
G8.5
BiPin
G8.5
GU6.5
GU6.5 GX10
GX10
Single Contact G8.5
Base R7sIdentification (not drawn to scale)
R7s
R7s BT56
LED Lamps - HID

MedScrew
Med
Med Screw
Screw MogScrew
Mog
Mog Screw
Screw EX39
EX39
EX39 Position-
Position- Export
Export BiPin
BiPin BiPin
BiPin Mogul BiPost
Mogul BiPost
E26
E26
E26 E39
E39
E39 Oriented Mogul
Oriented Mogul E40
E40 GY9.5
GY9.5 G12
G12 G38
G38
Med Screw Mog Screw EX39 Position- Export BiPin BiPin Mogul BiPost
E26 E39 Oriented Mogul E40 GY9.5 G12 G38
www.LED.com/Lamps – 31
 LED Lamps - HID
LED Lamps – HID Portfolio Snapshot

Profile ED17 ED23.5 ED28 ED18 ED37 BT56

E26/EX39 Adapter
Base E26/EX39 Adapter EX39 EX39 EX39 EX39
EX39
120-277 120-277 120-277 208-277
Voltage 120-277 120-277 277-480 277-480
277-480 277-480 277-480 277-480
Color Temp. 3000K, 4000K, 5000K 3000K, 4000K, 5000K 3000K, 4000K, 5000K 3000K, 4000K, 5000K 4000K or 5000K 4000K or 5000K

Standard Wattage 21W 35W 45W 50W 80W 115W 150W 180W 360W 270W 450W 470W
LED HID
Lamps Lumens 3,000 5,000 7,000 7,500 12,000 18,000 23,500 30,000 53,000 40,000 65,000 85,000
NEMA MH
70W 100W 175W 150W 250W 350W 400W 400W 750W 400W 1000W 1000W
Equivalent
NEMA HPS
50W 70W 100W 100W 150W 250W 310W 400W 600W 400W 750W 1000W
Equivalent
Selectable
LED HID Lamps*
HazLoc Offering** 21W 35W 45W 80W 150W
*Please refer to page 34 for more details about Selectable LED HID Lamps
**Please refer to page 40 for more details about Hazardous Location LED HID Lamps

Catalog Logic: Color Rendering Index (CRI or R):

An indication of the ability of the
lamp to render object colors in a
normal natural way. The higher the
Color Temperature (K):
number (0-100), the better the color
A measure of the visual "warmth"
appearance.
or "coolness" of the light from the
lamp. The higher the value, the Rated Life L70:
Bulb Shape: whiter or "cooler" the light appears. Hours of operation the lamp will provide before
Bulb shape Watts: reaching 70% of its original lumen output
(corresponds Energy Used (as Lumens: Dimmable:
to Traditional defined by FTC Light output (as defined Indicates whether a lamp
HID shape). Lamp Label Rules) by FTC Lamp Label Rules) is dimmable or not

MOD (in): DLC: Indicates whether

Base Type: Volts: Maximum Overall product is listed on the
Order Code:
ANSI Base Lamp data Diameter in inches DesignLights Consortium
Use the order
is based on Qualified Products List
code when MOL (in):
operation at Wattage Replacement:
ordering to Maximum Overall Location Rating:
rated voltage Wattage of Traditional
ensure that Length in inches Location Rating
you receive the Lamp the LED Lamp is as defined for LED
exact product Carton Quantity: meant to replace Lamps by UL 1993
you require Number of lamps
packed in a carton
Description:
Lamp Model
Description

Color
Bulb Base Order Carton MOL MOD Lumens Temp. Wattage Rated Life Location
LED Lamps - HID

Shape Type* Watts Code Description Volts Qty2 (in) (in) (Initial) (Initial) CRI Replacement L70 (Hrs)1 Dimmable DLC® 3,4 Rating 5,@
LED Replacement Lamps for HID - Ballast Bypass (Type B) - Hazardous Locations
ED17 E26/EX39 21 93134832 LED21ED17/730/HAZ 120-277 3 5.4 2.6 3,000 3000K >70 50W HPS / 70W MH 50,000 - - Damp

LED21ED17/730/HAZ
Wattage CCT (30 = 3000K) Hazardous Locations
Bulb Shape CRI (7 = 70)

32 – www.LED.com/Lamps
LED Lamps - HID
NEMA LED HID Wattage Equivalency
In February of 2021, the National Electrical Manufacturers Association (NEMA) published NEMA LL 10-2020 Replacing
HID Lamps with LED Lamps: Light Output Equivalency Claims. Current uses this Standard for LED products replacing HID
lamps, meeting or exceeding the minimum LED light output for equivalency claims. The LED wattage equivalency varies
based on the type of HID lamp being replaced - Metal Halide (MH) or High Pressure Sodium (HPS).

Metal Metal Minimum LED Current LED Current LED Current LED
Halide Lamp Halide Initial Lamp Initial Light Ordinary Location Selectable Ordinary Location Hazardous Location
Wattage (W) Light Output (lm) Output (lm) Retrofit Lamps Retrofit Lamps Retrofit Lamps

50 3,200 2,000 LED21ED17 LED/LC/ED17 LED21ED17/HAZ

70 5,200 3,000 LED21ED17 LED/LC/ED17 LED21ED17/HAZ

100 8,100 5,000 LED35ED17; LED45ED17 LED/LC/ED17 LED35ED17/HAZ; LED45ED17/HAZ

150 12,000 7,500 LED50ED23.5 LED/LC/ED23

175 11,000 7,000 LED45ED17; LED50ED23.5 LED/LC/ED17; LED/LC/ED23

250 19,100 12,000 LED80ED23.5 LED/LC/ED28 LED80ED23.5/HAZ

320 25,600 16,500 LED115ED28 LED/LC/ED28

350 28,400 18,000 LED115ED28 LED/LC/ED28

360 29,400 19,000 LED150ED28 LED/LC/ED28 LED150ED28/HAZ

400 33,100 21,500 LED150ED28; LED180ED18 LED/LC/ED28; LED/LC/ED37 LED150ED28/HAZ

750 72,300 46,500 LED360ED37 LED/LC/ED37

1,000 100,280 65,000 LED450BT56; LED470BT56 LED/LC/ED37

HPS HPS Minimum LED Current LED Current LED Current LED
Lamp Initial Light Lamp Initial Light Ordinary Location Selectable Ordinary Location Hazardous Location
Wattage (W) Output (lm) Output (lm) Retrofit Lamps Retrofit Lamps Retrofit Lamps

50 4,500 2,500 LED21ED17 LED/LC/ED17 LED21ED17/HAZ

70 6,300 4,000 LED35ED17 LED/LC/ED17 LED35ED17/HAZ

100 9,500 6,000 LED45ED17; LED50ED23.5 LED/LC/ED17; LED/LC/ED23 LED45ED17/HAZ

150 13,000 8,500 LED80ED23.5 LED/LC/ED23 LED80ED23.5/HAZ

200 19,500 12,500 LED/LC/ED28

250 26,000 17,000 LED115ED28 LED/LC/ED28

310 33,200 21,500 LED150ED28 LED/LC/ED28 LED150ED28/HAZ

400 44,000 29,000 LED180ED18; LED270BT56 LED/LC/ED37

600 66,000 42,500 LED360ED37 LED/LC/ED37

750 82,500 53,500 LED450BT56 LED/LC/ED37

1,000 110,000 73,000 LED470BT56

LED Lamps - HID

www.LED.com/Lamps – 33
 original

LED Lamps - HID

LED REPLACEMENT LAMPS

Selectable LED family icon preliminary

Current offers unmatched flexibility in a HID LED Replacement Lamp.
LumenChoice / SpectraChoice
Select wattage
original rev 082222
and color temperature v1 flick of a switch.
at the
r1 r2 r3
LumenChoice® + SpectraChoice™ ED17, ED23.5 and ED28 lamps maximize the potential to reduce inventory and
streamline product lists. These lamps allow installers to react to a wide variety of needs, providing the ability to
adjust both the color temperature of the light and the brightness. Utilizing proprietary active cooling technology,
Selectable LED HID lamps still match the length and diameter of the HID ANSI profile, so size isn't an issue when
r4 trying to fit theser5lamps into existingr6
fixtures.

LumenChoice / SpectraChoice
But what about when it's known rev 082222
a site prefersv1
a specific color temperature? Selectable LumenChoice® ED37
replacement lamps provide a single color temperature SKU with lumen level selectability to ensure that you
r1 r2 r3
always have the perfect amount of light for any space at your site.

r4 r5
LumenChoice / SpectraChoice revr6082222 v1

LumenChoice ® LumenChoice ®

SpectraChoice
LumenChoice / SpectraChoice rev 082222
™
SpectraChoice
v1 wattage (lumens)
Select
™

using built-in switch.

LumenChoice ®

LumenChoice ®™+ LumenChoice ®

LumenChoice ®™+
SpectraChoice SpectraChoice
SpectraChoice™ SpectraChoice™

LumenChoice ®+ LumenChoice +
Select color temperature
®

SpectraChoice™ SpectraChoice™
using built-in switch.

Even more versatility

Each E26 lamp comes with a mogul base adapter.
Lamps may be used in E26 or E39/EX39 sockets.
LED Lamps - HID

34 – www.LED.com/Lamps
LED Lamps - HID

Profile ED17 ED23.5 ED28 ED37

Voltage 120-277 120-277 120-277 277-480

E26/EX39 Adapter
Base E26/EX39 Adapter EX39 EX39
EX39
SpectraChoice™ SpectraChoice™ SpectraChoice™
Color Temperature 4000K or 5000K
3000K 4000K 5000K 3000K 4000K 5000K 3000K 4000K 5000K
LumenChoice® LumenChoice® LumenChoice® LumenChoice®
Wattage
21W 35W 45W 50W 65W 80W 90W 115W 150W 200W 325W 450W
Lumens 3,000 5,500 7,000 8,200 10,500 12,500 14,000 18,000 23,500 35,000 53,500 68,000

NEMA MH Equivalent 70W 100W 175W 150W 150W 250W 250W 350W 400W 400W 750W 1000W

NEMA HPS Equivalent 50W 70W 100W 100W 150W 150W 200W 250W 310W 400W 750W 750W

Selectable LumenChoice® + SpectraChoice™ HID Replacement - Type B

Selectable Selectable
Bulb Base Selectable Order Carton MOL MOD Lumens Color Temp.* Wattage Rated Life Location
Shape Type Watts* Code Description Volts Qty2 (in) (in) (Initial)7 (Initial) CRI Replacement8 L70 (Hrs)1 DLC® ID3,4 Rating5,6
LED Replacement Lamp for HID - Ballast Bypass (Type B)
21 3,400 3000K 50W HPS / 70W MH
E26/
ED17 35* 93303384 LED/LC/ED17/7SC 120-277 3 5.4 2.6 5,500* 4000K* >70 70W HPS / 100W MH 50,000 - Damp
EX39 100W HPS / 175W MH
45 7,000 5000K

50 8,200 3000K 100W HPS / 150W MH

E26/
ED23.5 65 93312104 LED/LC/ED23.5M/7SC 120-277 3 7.8 3.7 10,500 4000K >70 150W HPS / 150W MH 50,000 - Damp
EX39
80* 12,500* 5000K* 150W HPS / 250W MH

50 8,200 3000K 100W HPS / 150W MH

ED23.5 EX39 65 93312106 LED/LC/ED23.5/7SC 120-277 3 7.8 3.7 10,500 4000K >70 150W HPS / 150W MH 50,000 S-4V5N0G Damp
80* 12,500* 5000K* 150W HPS / 250W MH

90 14,000 3000K 200W HPS / 250W MH

ED28 EX39 115 93312102 LED/LC/ED28/7SC 120-277 3 8.3 4.1 18,000 4000K >70 250W HPS / 350W MH 50,000 - Damp
150* 23,500* 5000K* 310W HPS / 400W MH

Selectable LumenChoice® HID Replacement - Type B

Selectable
Bulb Base Selectable Order Carton MOL MOD Lumens Color Temp. Wattage Rated Life Location
Shape Type Watts* Code Description Volts Qty2 (in) (in) (Initial)7 (Initial) CRI Replacement8 L70 (Hrs)1 DLC® ID3,4 Rating5,6
LED Replacement Lamp for HID - Ballast Bypass (Type B)
200 35,000 400W HPS / 400W MH
ED37 EX39 325 93311586 LED/LC/ED37/740 277-480 3 11.3 5.6 53,500 4000K >70 750W HPS / 750W MH 50,000 S-ZZMLJT Damp
450* 68,000* 750W HPS / 1000W MH

200 35,000 400W HPS / 400W MH

ED37 EX39 325 93311587 LED/LC/ED37/750 277-480 3 11.3 5.6 53,500 5000K >70 750W HPS / 750W MH 50,000 S-25L41Q Damp
450* 68,000* 750W HPS / 1000W MH
LED Lamps - HID

1
The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original lumen output (L70)
2
Minimum order quantity = 1
3
E26 based products are not eligible for DLC. Not all product variations on this page are DLC qualified. Visit qpl.designlights.org/solid-state-lighting to confirm qualification.
4
Do not use with phase-cut dimmers. Dimming functions only with external Variac control devices.
5
UL 1993 Environmental Requirements for LED LAMPS
Damp Location – Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment, including partially protected locations
6
Not suitable for air-tight explosive or hazardous fixtures.
7
Lumen levels correspond with wattage levels. Color temperature levels are independent of wattage & lumens.
8
Wattage Replacement levels correspond with wattage levels. Wattage Replacements based on NEMA Standards Publication LL 10-2020 Replacing HID Lamps with LED Lamps: Light Output Equivalency Claims.
* Default wattage and color temperature settings noted by "*" in tables above. Lumen levels correspond with wattage levels. Color temperature levels are independent of wattage & lumens.

www.LED.com/Lamps – 35
 LED Lamps - HID
LED REPLACEMENT LAMPS

Current introduces an Industry-First 400W LED HID Replacement in an ED18 Shape.

GE LED lamps for HID replacement utilize a proprietary design with active cooling, which allows for high output
from a compact size. The length and diameter match HID ANSI profiles. These lamps feature omnidirectional light
output, with similar distribution to traditional HID lamps. This enables GE LED lamps to fit in a variety of fixtures
while providing equivalent light levels to HID, making it possible to upgrade more applications to LED without
replacing an entire fixture. All of the GE LED lamps in this category are Type B, which means the fixture is re-wired
to bypass the ballast.

Lamp Drawings (not drawn to scale)

ED18

ED18
LU400 LED180 ED23 .5
Mog Mog
ED18 HID Replacement
Bulb Base Carton MOL MOD Lumens Color Wattage Rated Life
Shape Type Watts Order Code Description Volts Qty2 (in) (in) (Initial) Temp. CRI Replacement6 L70 (Hrs)1 DLC® ID4,5 Location Rating3
LED Replacement Lamp for HID - Ballast Bypass (Type B)
ED18 EX39 180 93312096 LED180ED18/730 120-277 3 9.7 3.0 30,000 3000K >70 400W HPS/400W MH 50,000 - Damp, Enclosed

EX39 180 93312098 LED180ED18/740 120-277 3 9.7 3.0 30,000 4000K >70 400W HPS/400W MH 50,000 - Damp, Enclosed

EX39 180 93312100 LED180ED18/750 120-277 3 9.7 3.0 30,000 5000K >70 400W HPS/400W MH 50,000 - Damp, Enclosed
These products are covered by U.S. Patents 10788163 and 10508776. These products may also be covered by other U.S. patents or pending applications.
LED Lamps - HID

Information provided is subject to change without notice. Please verify all details with Current. All values are design or typical values when measured under laboratory conditions, and Current makes no warranty or guarantee,
expressed or implied, that such performance will be obtained under end-use conditions.
1
The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original lumen output (L70)
2
Minimum order quantity from Current = 1
3
UL 1993 Environmental Requirements for LED LAMPS
Damp Location – Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment, including partially protected locations
4
Not all product variations on this page are DLC qualified. Visit qpl.designlights.org/solid-state-lighting to confirm qualification.
5
Do not use with phase-cut dimmers. Dimming functions only with external Variac control devices.
6
Wattage Replacements based on NEMA Standards Publication LL 10-2020 Replacing HID Lamps with LED Lamps: Light Output Equivalency Claims.

36 – www.LED.com/Lamps
LED Lamps - HID
LED HID - Type B
Color
Bulb Base Order Carton MOL MOD Lumens Temp. Rated Life Location
Shape Type Watts Code Description Volts Qty2 (in) (in) (Initial) (Initial) CRI Wattage Replacement8 L70 (Hrs)1 DLC® ID3,4 Rating5,6
LED Replacement Lamps for HID - Ballast Bypass (Type B)
ED17 E26 21 27729 LED21ED17/740 120-277 3 5.4 2.6 3,000 4000K >70 50W HPS / 70W MH 50,000 - Damp
E26 21 27732 LED21ED17/750 120-277 3 5.4 2.6 3,000 5000K >70 50W HPS / 70W MH 50,000 - Damp
E26 35 93112114 LED35ED17/730 120-277 3 5.4 2.6 5,000 3000K >70 70W HPS / 100W MH 50,000 - Damp
E26 35 27602 LED35ED17/740 120-277 3 5.4 2.6 5,000 4000K >70 70W HPS / 100W MH 50,000 - Damp
E26 35 27724 LED35ED17/750 120-277 3 5.4 2.6 5,000 5000K >70 70W HPS / 100W MH 50,000 - Damp
E26 45 93116975 LED45ED17/835 120-277 3 5.4 2.6 6,000 3500K >70 100W HPS / 100W MH 50,000 - Damp
E26 45 93148082 LED45ED17/740 120-277 3 5.4 2.6 7,000 4000K >70 100W HPS / 175W MH 50,000 - Damp
E26 45 93148081 LED45ED17/750 120-277 3 5.4 2.6 7,000 5000K >70 100W HPS / 175W MH 50,000 - Damp
ED23.5 E26 80 22768 LED80ED23.5M/740 120-277 3 7.8 3.7 12,000 4000K >70 150W HPS / 250W MH 50,000 - Damp
E26 80 93125008 LED80ED23.5M/750 120-277 3 7.8 3.7 12,000 5000K >70 150W HPS / 250W MH 50,000 - Damp
EX39 50 22679 LED50ED23.5/740 120-277 3 7.8 3.7 7,500 4000K >70 100W HPS / 150W MH 50,000 P2LJ433Z Damp
EX39 50 22739 LED50ED23.5/750 120-277 3 7.8 3.7 7,500 5000K >70 100W HPS / 150W MH 50,000 P9E7B4MB Damp
EX39 50 93154637 LED50ED23.5/740/277/480 277-480 3 7.8 3.7 7,500 4000K >70 100W HPS / 150W MH 50,000 S-QSEC3A Damp
EX39 50 93154639 LED50ED23.5/750/277/480 277-480 3 7.8 3.7 7,500 5000K >70 100W HPS / 150W MH 50,000 S-TGNWE4 Damp
EX39 80 93112196 LED80ED23.5/730 120-277 3 7.8 3.7 12,000 3000K >70 150W HPS / 250W MH 50,000 PDVK0YIV Damp
EX39 80 22635 LED80ED23.5/740 120-277 3 7.8 3.7 12,000 4000K >70 150W HPS / 250W MH 50,000 PHJ4LA1W Damp
EX39 80 22676 LED80ED23.5/750 120-277 3 7.8 3.7 12,000 5000K >70 150W HPS / 250W MH 50,000 PYL1MPL2 Damp
EX39 80 93154642 LED80ED23.5/740/277/480 277-480 3 7.8 3.7 12,000 4000K >70 150W HPS / 250W MH 50,000 S-TUGPZM Damp
EX39 80 93154640 LED80ED23.5/750/277/480 277-480 3 7.8 3.7 12,000 5000K >70 150W HPS / 250W MH 50,000 S-1FJ4CK Damp
ED28 EX39 115 93112197 LED115ED28/730 120-277 3 8.3 4.1 18,000 3000K >70 250W HPS / 350W MH 50,000 PE646DNU Damp
EX39 115 22622 LED115ED28/740 120-277 3 8.3 4.1 18,000 4000K >70 250W HPS / 350W MH 50,000 PONSAR2J Damp
EX39 115 22623 LED115ED28/750 120-277 3 8.3 4.1 18,000 5000K >70 250W HPS / 350W MH 50,000 PZFIPZUL Damp
EX39 115 93139853 LED115ED28/740/277/480 277-480 3 8.3 4.1 18,000 4000K >70 250W HPS / 350W MH 50,000 PZ3P5P7U/PEQF29S7 Damp
EX39 115 93139854 LED115ED28/750/277/480 277-480 3 8.3 4.1 18,000 5000K >70 250W HPS / 350W MH 50,000 PY31MNAU/PCV74KSL Damp
EX39 150 93112198 LED150ED28/730 120-277 3 8.3 4.1 23,500 3000K >70 310W HPS / 400W MH 50,000 PAVD2D0E Damp
EX39 150 22611 LED150ED28/740 120-277 3 8.3 4.1 23,500 4000K >70 310W HPS / 400W MH 50,000 P53Y3N60 Damp
EX39 150 22613 LED150ED28/750 120-277 3 8.3 4.1 23,500 5000K >70 310W HPS / 400W MH 50,000 P1EL9LHG Damp
EX39 150 93139849 LED150ED28/740/277/480 277-480 3 8.3 4.1 23,500 4000K >70 310W HPS / 400W MH 50,000 PUQHU5LU/PYCNNIK7 Damp
EX39 150 93139850 LED150ED28/750/277/480 277-480 3 8.3 4.1 23,500 5000K >70 310W HPS / 400W MH 50,000 PY3DUSY0/POTANRAP Damp
ED18 EX39 180 93312096 LED180ED18/730 120-277 3 9.7 3.0 30,000 3000K >70 400W HPS/400W MH 50,000 - Damp, Enclosed
EX39 180 93312098 LED180ED18/740 120-277 3 9.7 3.0 30,000 4000K >70 400W HPS/400W MH 50,000 - Damp, Enclosed
EX39 180 93312100 LED180ED18/750 120-277 3 9.7 3.0 30,000 5000K >70 400W HPS/400W MH 50,000 - Damp, Enclosed
BT56 EX39 270 93153080 LED270BT56/740/120/277 120-277 3 12.3 5.6 40,000 4000K >70 400W HPS / 400W MH 50,000 PG8499V4 Damp
EX39 270 93153121 LED270BT56/750/120/277 120-277 3 12.3 5.6 40,000 5000K >70 400W HPS / 400W MH 50,000 PIZKSQ3O Damp
EX39 270 93095547 LED270BT56/740 277-480 3 12.3 5.6 40,000 4000K >70 400W HPS / 400W MH 50,000 PW0OLOQL Damp
EX39 270 93095553 LED270BT56/750 277-480 3 12.3 5.6 40,000 5000K >70 400W HPS / 400W MH 50,000 PUZP8RVI Damp
ED37 EX39 360 93122144 LED360ED37/740 277-480 3 10.6 5.6 53,000 4000K >70 600W HPS / 750W MH 50,000 P7WQQT4S Damp
EX39 360 93122166 LED360ED37/750 277-480 3 10.6 5.6 53,000 5000K >70 600W HPS / 750W MH 50,000 PK5HC9UY Damp
BT56 EX39 450 93153122 LED450BT56/740/208/277 208-277 3 12.3 5.6 65,000 4000K >70 750W HPS / 1000W MH 50,000 POIL8M4C Damp
EX39 450 93153123 LED450BT56/750/208/277 208-277 3 12.3 5.6 65,000 5000K >70 750W HPS / 1000W MH 50,000 PD4K2UXF Damp
EX39 450 93096445 LED450BT56/740 277-480 3 12.3 5.6 65,000 4000K >70 750W HPS / 1000W MH 50,000 PLNCOZ5Z Damp
EX39 450 93096547 LED450BT56/750 277-480 3 12.3 5.6 65,000 5000K >70 750W HPS / 1000W MH 50,000 PH8F9ZNF Damp
EX39 470 93303389 LED470BT56/740 277-480 3 12.8 5.6 85,000 4000K >70 1000W HPS / 1000W MH 50,000 S-E56HRP Damp
EX39 470 93303388 LED470BT56/750 277-480 3 12.8 5.6 85,000 5000K >70 1000W HPS / 1000W MH 50,000 S-64APZW Damp
Additional Information for LED Replacement Lamps for HID: Open and Closed Rated - Ballast bypass required
These products are covered by U.S. Patents 10788163 and 10508776. These products may also be covered by other U.S. patents or pending applications.

LED HID Accessories

Order Code Description Carton Qty2 Additional Information
93151372 LED/E26/EX39/ADAPTER 60 E26/EX39 Socket Adapter
93313551 LED-HID-TETHER-KIT 20 1 Tether Kit
93313553 LED-HID-4A-FUSE-KIT 20 1 Fuse (4A), 1 Fuse Holder
93313555 LED-HID-8A-FUSE-KIT 20 1 Fuse (8A), 1 Fuse Holder
LED Lamps - HID

1
The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original lumen output (L70)
2
Minimum order quantity = 1
3
E26 based products are not eligible for DLC. Not all product variations on this page are DLC qualified. Visit qpl.designlights.org/solid-state-lighting to confirm qualification.
4
Do not use with phase-cut dimmers. Dimming functions only with external Variac control devices.
5
UL 1993 Environmental Requirements for LED LAMPS
Damp Location – Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment, including partially protected locations
6
Not suitable for air-tight explosive or hazardous fixtures.
7
Lumen levels correspond with wattage levels. Color temperature levels are independent of wattage & lumens.
8
Wattage Replacement levels correspond with wattage levels. Wattage Replacements based on NEMA Standards Publication LL 10-2020 Replacing HID Lamps with LED Lamps: Light Output Equivalency Claims.

www.LED.com/Lamps – 37
 LED Lamps - HID
LED REPLACEMENT LAMPS

HID LED Replacement Lamp Case Studies

470W High Output BT56 LED Replacement lamps were used to retrofit 1500W Metal Halide fixtures at a baseball
field in Riverview, New Brunswick, Canada. For more details around the retrofit and the resulting benefits that
they realized, visit www.LED.com/inspiration/ballfield-benefits-from-new-high-output-led-lamp.

Drone images capture the before and after of the baseball field highlighting the uniform light
coverage after the LED BT56 installation.
LED Lamps - HID

38 – www.LED.com/Lamps
LED Lamps - HID
HID LED Replacement Lamp Case Studies

Improvements in lighting can make a huge impact on the safety and security of a site. In the example below,
250W Metal Halide HID Lamps were replaced with 80W Type B ED23.5 LED HID Lamps, resulting in a noticeable
improvement in visibility and light coverage.

Before: 250W Metal Halide Lamps

LED Lamps - HID

After: 80W ED23.5 LED HID Lamps

www.LED.com/Lamps – 39
 LED Lamps - HID - Hazardous Locations
LED Lamps – HID for Hazardous Locations
Current offers the industry's most extensive portfolio of LED Lamps certified for use in hazardous locations. LED
hazardous location lamps offer an opportunity to realize the benefits of an upgrade to LED lighting at an affordable
cost. Retrofits certified to UL844 allow existing hazardous location fixtures to be used, while replacing old HID
lamps and bypassing the ballasts. Lamps can provide an attractive ROI when entire fixture upgrades may be cost
prohibitive, allowing hazardous location facilities to save on energy costs and improve light quality and reliability
without compromising safety.

LED HID Lamps approved for hazardous locations provide customers an innovative lighting solution. These lamps
maintain the key features of standard GE LED HID Lamps, with a proprietary active cooling design that allows high
output from a compact form, with omnidirectional light output. With E26-based hazardous location lamps, Current
also includes an E39 socket adapter in the kit for mogul base applications. This eliminates the possibility of
ordering a lamp with the wrong base. The heat profile of Current's LED lamps is lower than traditional HID, which
equates to a lower overall temperature code. This may provide additional benefits to a facility, beyond the lower
energy consumption and increased longevity of the lamps themselves.

ED17 ED23.5 ED28

LED HID - Type B - Hazardous Locations

Color
Bulb Base Order Carton MOL MOD Lumens Temp. Wattage Rated Life Location
Shape Type* Watts Code Description Volts Qty2 (in) (in) (Initial) (Initial) CRI Replacement8 L70 (Hrs)1 DLC® ID3,4 Rating 5,@
LED Replacement Lamps for HID - Ballast Bypass (Type B) - Hazardous Locations
ED17 E26/EX39 21 93134832 LED21ED17/730/HAZ 120-277 3 5.4 2.6 3,000 3000K >70 50W HPS / 70W MH 50,000 - Damp
E26/EX39 21 93134833 LED21ED17/740/HAZ 120-277 3 5.4 2.6 3,000 4000K >70 50W HPS / 70W MH 50,000 - Damp
E26/EX39 21 93134834 LED21ED17/750/HAZ 120-277 3 5.4 2.6 3,000 5000K >70 50W HPS / 70W MH 50,000 - Damp
E26/EX39 35 93134830 LED35ED17/740/HAZ 120-277 3 5.4 2.6 5,000 4000K >70 70W HPS / 100W MH 50,000 - Damp
E26/EX39 35 93134831 LED35ED17/750/HAZ 120-277 3 5.4 2.6 5,000 5000K >70 70W HPS / 100W MH 50,000 - Damp
E26/EX39 45 93134846 LED45ED17/730/HAZ 120-277 3 5.4 2.6 6,000 3000K >70 100W HPS / 100W MH 50,000 - Damp
E26/EX39 45 93134847 LED45ED17/740/HAZ 120-277 3 5.4 2.6 6,000 4000K >70 100W HPS / 100W MH 50,000 - Damp
E26/EX39 45 93134848 LED45ED17/750/HAZ 120-277 3 5.4 2.6 6,000 5000K >70 100W HPS / 100W MH 50,000 - Damp
ED23.5 E26/EX39 80 93141934 LED80ED23.5/740/HAZ 120-277 3 7.8 3.7 12,000 4000K >70 150W HPS / 250W MH 50,000 - Damp
E26/EX39 80 93141935 LED80ED23.5/750/HAZ 120-277 3 7.8 3.7 12,000 5000K >70 150W HPS / 250W MH 50,000 - Damp
EX39 80 93148146 LED80ED23.5/740/277/480/HAZ 277-480 3 7.8 3.7 12,000 4000K >70 150W HPS / 250W MH 50,000 S-3GZE5Y Damp
EX39 80 93148147 LED80ED23.5/750/277/480/HAZ 277-480 3 7.8 3.7 12,000 5000K >70 150W HPS / 250W MH 50,000 S-O48JK5 Damp
ED28 EX39 150 93154635 LED150ED28/740/HAZ 120-277 3 8.3 4.1 23,500 4000K >70 310W HPS / 400W MH 50,000 S-EB9LHA Damp
EX39 150 93154636 LED150ED28/750/HAZ 120-277 3 8.3 4.1 23,500 5000K >70 310W HPS / 400W MH 50,000 S-S2QAV1 Damp
EX39 150 93154647 LED150ED28/740/277/480/HAZ 277-480 3 8.3 4.1 23,500 4000K >70 310W HPS / 400W MH 50,000 S-ZN9G32 Damp
EX39 150 93154648 LED150ED28/750/277/480/HAZ 277-480 3 8.3 4.1 23,500 5000K >70 310W HPS / 400W MH 50,000 S-6UW8HL Damp

Additional Information for LED Replacement Lamps for HID: Open and Closed Rated - Ballast bypass required
These products are covered by U.S. Patents 10788163 and 10508776. These products may also be covered by other U.S. patents or pending applications.
LED Lamps - HID

* EX39 socket adapter is included with HAZ E26 based lamps for mogul base applications.

1
The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original lumen output (L70)
2
Minimum order quantity = 1
3
E26 based products are not eligible for DLC. Not all product variations on this page are DLC qualified. Visit qpl.designlights.org/solid-state-lighting to confirm qualification.
4
Do not use with phase-cut dimmers. Dimming functions only with external Variac control devices.
5
UL 1993 Environmental Requirements for LED LAMPS
Damp Location – Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment, including partially protected locations
8
Wattage Replacement levels correspond with wattage levels. Wattage Replacements based on NEMA Standards Publication LL 10-2020 Replacing HID Lamps with LED Lamps: Light Output Equivalency Claims.
@
See Installation Guide for applicable Hazardous Location luminaire fittings

40 – www.LED.com/Lamps
LED Lamps - HID - Hazardous Locations
What's Considered a Hazardous Location?
The National Electrical Code (NEC) defines hazardous locations in terms of CLASS, DIVISION and GROUP:
• CLASS I locations are those in which flammable gases or vapors are or may be present in the air
in quantities sufficient to produce explosive or ignitable mixtures.
• CLASS II locations are those that are hazardous because of the presence of combustible dust.

Each CLASS is further defined as either DIVISION 1 or DIVISION 2.

• DIVISION 1 is an environment that is normally hazardous.
• DIVISION 2 is an environment that is not normally hazardous.

GROUP defines the specific hazardous material in the surrounding atmosphere. See the table below
for specific examples.

Typical Atmosphere and

NEC Class Divsion Group
Auto-ignition Temperatures
A Acetylene (305°C, 581°F)
Hydrogen (502°C, 986°F) manufactured gases containing
B
more than 30% hydrogen (by volume)
Ethylene (450°C, 842°F)
C
Cylopropane (503°C, 938°F)
I - Gases, Vapors 2 - Not normally present
Hexane (225°C, 437°F)
Butane (288°C, 550°F)
Propane (450°C, 842°F)
D
Acetone (465°C, 869°F)
Benzene (420°C, 788°F)
Gasoline (280°-471°C, 536°-880°F)
E Metal Dusts (Aluminum, Magnesium)
1 - Normally present
II - Combustible Dusts F Carbonaceous Dusts (Coal, Carbon black, Charcoal, Coke)
2 - Not normally present
G Dusts not in Groups E or F (Flour, Grain, Wood, Plastic)

Typical Hazardous Substances and Auto-ignition Temperatures by Group

How are LED Retrofits Certified?

UL evaluates Retrofit Luminaire Conversion Kits for Use in Hazardous Locations in accordance with
the appropriate Standards. LED Lamps are UL-certified as part of Retrofit Kits that also include an
installation guide detailing instructions for retrofitting hazardous location luminaires and a fixture label
that indicates the lamp being used and associated new temperature code.

See lamp installation guides for full luminaire fitting details.

Current Hazardous Location Lamps – Approved UL Fixtures by Classification

Classifications: Class 2, Division 1, Groups E,F, G;

Classifications: Class 1, Division 2, Groups A, B, C, D Class 2, Division 2, Groups F, G

UL HazLoc Fixture Type ED17 ED23.5 ED28 UL HazLoc Fixture Type ED17 ED23.5 ED28

GE Filtr-Gard® H2 Yes Yes Yes GE Filtr-Gard® H2 - - -

GE Powr-Gard® H9 - - - GE Powr-Gard® H9 Yes Yes -
Appleton Mercmaster™ II Yes Yes Yes Appleton Mercmaster™ II Yes Yes Yes
LED Lamps - HID

Appleton Mercmaster™ III Yes Yes Yes Appleton Mercmaster™ III Yes Yes Yes
Crouse-Hinds Champ® VMV Yes Yes Yes Crouse-Hinds Champ® VMV Yes - Yes
Thomas & Betts Hazlux® 3 Yes Yes Yes Thomas & Betts Hazlux® 3 Yes Yes Yes
Hubbell Killark® VM Series Yes Yes Yes Hubbell Killark® VM Series Yes Yes Yes
Holophane Petrolux® P3M Yes Yes - Holophane Petrolux® P3M Yes Yes -
Holophane Petrolux® II PETL - - Yes Holophane Petrolux® II PETL - - Yes

www.LED.com/Lamps – 41
 LED Lamps - HID - Hazardous Locations
Ohio Manufacturing Facility Replaces Dated HPS Lamps with New Current LED HID Lamps
Approved for Hazardous Locations

Before: 250W High Pressure Sodium Lamps After: 45W ED17 LED HID Lamps

An Ohio-based company needed a solution for a dimly lit manufacturing plant, and Current jumped at the opportunity to help. This
wasn’t a normal lamp refit, but Current knew its expansive LED Lamp portfolio had a product up for the challenge.

From the outset of the project, it was apparent that the customer needed lamps that would fit into traditional hazardous rated High
Pressure Sodium (HPS) fixtures. Installation needed to be quick to avoid downtime, and budgets were tight, so avoiding significant
renovations was preferred. The new LED HID replacement lamps needed to be approved for hazardous rated fixtures, as the plant
deals with hazardous materials in its processes.

The Solution

Current recommended its Hazardous LED HID Replacement Lamps. These LED lamps are designed for those rugged environments
where long lasting performance is a necessity. Current’s LED HID replacement lamps for hazardous locations are certified for use in a
variety of hazardous location luminaires, including Class I Division 2, Class II Division 1, and Class II Division 2 applications.

With a much longer life compared to a standard HID lamp, these LED lamps would provide consistent, dependable lighting in a
facility that desperately needed it. The LED lamps use much less energy compared with their HPS counterparts. This not only saves
money, but it also provides the facility with an improved temperature code. This is important as it reduces the ambient temperature
of the fixture by an average of 95°C in the most commonly used fixtures. By lowering the temperature code, you decrease the air
temperature around the fixture, which makes for a safer operating environment. This allows customers the ability to install higher
lumen lamps in locations that they were previously only able to provide low wattage/lumen lamps.

Why Current’s Lamps

One consideration for this plant was ongoing maintenance. Its existing lighting was not easy to replace and required significant
manpower to maintain or update. Current was able to give them a solution that would last 2.5 times longer while still delivering a more
efficient and effective solution. At the beginning of the installation, the team quickly realized they had fixtures with both medium (E26)
and mogul (E39) sockets, which posed an issue with managing multiple lamp designs for the installation. Current’s product team
prepared for this exact scenario by including a mogul-base (E39) adapter with each lamp. Current’s product strategy eliminated the
possibility of ordering a lamp with the wrong base and the installer having to come back at a later date at an additional charge. This
also reduces the SKU count for a project.

In addition to the longer life of LEDs, the industrial plant was also drawn to the fact that Current’s lamps can go from a 250W HPS
Lamp all the way down to 45W, which means increased savings in addition to longer life. The plant is now realizing $25,000 annual
LED Lamps - HID

savings compared to their traditional lamps. Over the life of the lamp, they will save $125,000, and switching to Current’s Hazardous
Location LED HID replacement lamps will help them achieve payback in just 9 months.

Many manufacturing areas face uneven light distribution and dark spots. Most common is burned out lamps that cost time and money
to replace because operations have to stop while these are fixed. Current’s hazardous location lamps offer a five-year/50,000-hour
warranty to give the end user peace of mind and avoid these issues.

42 – www.LED.com/Lamps
LED Lamps - HID - Hazardous Locations
The Results

Installing the lamps was a smooth process. Once the new lights were turned on, the change was obvious: Areas were brighter.

The feedback from members working in the facility is overwhelmingly positive. They report that spaces are much brighter, providing
better visibility in places that used to be very dark, and making the plant look and feel like a better place to work. In fact, the facility
has already requested additional lamp retrofits in the plant due to the success and effectiveness they are witnessing after just a few
weeks.

“The rooms look fantastic, it’s way easier to work and see, and instantly modernizes and brightens the entire area. It’s hard to believe,
and somewhat embarrassing, that we lived with and just accepted the old lighting for so long,” the plant manager said.

Another worker added, “The new LED lamps make a drastic difference throughout our facility. With the new upgrade from the old
yellow tinted HPS lights, some areas that once had a dark and gloomy feeling have now become areas where our employees want to
work. It is amazing how something so little can improve the area and the site’s morale so much.”

Current’s Hazardous Location LED HID Replacement Lamps were the perfect solution for this manufacturing plant. Now, with better
lighting, lower maintenance costs and reduced energy expenses, the facility can be safer and more productive.

LED Lamps - HID

www.LED.com/Lamps – 43
 LED Lamps - Plug-in - Type A
LED Lamps - Type A Plug-ins

Type A LED plug-in lamps are direct replacements for pin-based compact fluorescent lamps. These lamps operate
from CFL ballasts. Horizontal and vertical orientation lamps are offered in order to minimize energy consumption and
improve fixture efficiency. Choose the lamp orientation that suits the application.

Heat sink for thermal

managment enables
long life

Plastic lens provides

excellent diffusion

Type A
Horizontal

Horizontal orientation lamps

feature a rotatable base Type A
Vertical
LED Lamps - Plug-in

Type A plug-in bases can be used

in a variety of sockets
(see diagrams above product tables)

44 – www.LED.com/Lamps
LED Lamps - Plug-in - Type A
Catalog Logic:
Color Rendering Index (CRI or R):
Bulb Shape: An indication of the ability of the
Bulb shape lamp to render object colors in a
followed by normal natural way. The higher the
its size (the Lumens:
Watts: Light output (as defined by number (0-100), the better the color
maximum appearance. Dimmable:
diameter Nominal Lamp FTC Lamp Label Rules)
Watts on ballast Indicates whether a lamp
of the bulb is dimmable or not
expressed
in eighths of Color Temperature (K):
MOL (in):
an inch). A measure of the visual Additional Information:
Order Code: Maximum Overall
"warmth" or "coolness" Typical application and/or
Use the order Length in inches Wattage Replacement:
of the light from the other important information
code when Wattage of Traditional
lamp. The higher
ordering to Lamp the LED Lamp is
the value, the whiter Location Rating:
ensure that Carton Quantity: meant to replace
or "cooler" the light Location Rating as defined
you receive the Number of lamps appears. for LED Lamps by UL 1993
exact product packed in a
you require carton
Base Type:
DLC:
ANSI Base
Indicates whether product
Description: Rated Life L70:
is listed on the DesignLights
Lamp Model Hours of operation
Consortium Qualified
Description the lamp will provide
Products List
before reaching 70%
of its original lumen
output

Color Wattage
Bulb Base Lamp Order Carton MOL Lumens Temp Replace- Rated Life Location
®
Shape Type Watts Code Description Qty2 (In) (Initial) (Initial) CRI ment L70 (Hrs)1 Dimmable DLC 4 Rating3 Additional Information#
Vertical Type A 4-pin
Plug-In G24q/GX24q 9 33956 LED9G24Q-V/827 6 5.9 1100 2700K 80 13/18/26 50,000 - - Damp Requires Electronic Ballast, Fully Enclosed

LED9G24Q-V/827
CCT (27 = 2700K)
Wattage
Base CRI (8 = 80)
Orientation (H = Horizontal, V = Vertical)

Lamp Drawings (not drawn to scale)

Type A
G24d

Type A
G24q
LED Lamps - Plug-in

Type A Type A
GX24q G24q

www.LED.com/Lamps – 45
 LumenChoice / SpectraChoice rev 082222 v1
r1 r2 r3
LED Lamps - Plug-in - Type A
Type A - 2-pin Plug-ins
2-PIN REPLACEMENT r4 r5 r6
HORIZONTAL VERTICAL
CONFIGURATION 5 Watt Replacement Bases CONFIGURATION

GX23

10.5 Watt Replacement Bases

LumenChoice / SpectraChoice rev 082222 v1

G24d-1 G24d-2 G24d-3

LumenChoice ®

SpectraChoice™

Selectable SpectraChoice™ Type A - 2-pin Plug-in Lamps LumenChoice ®+

Bulb Base Lamp Order Carton MOL Lumens
Color
Temp*
Wattage
Replace- Rated Life DLC® Location
SpectraChoice™
Shape Type Watts Code Description Qty2 (In) (Initial)5 (Initial) CRI ment L70 (Hrs)1 ID4 Rating3 Additional Information^
Vertical Type A G24d 2-pin
Plug-In 1000 2700K
SpectraChoice™
1100 3000K
G24d 10.5 93300091 LED11G24d-V/8SC-4PK 24 6.2 80 13/18/26 50,000 - Damp Selectable Color Temperature (4000K Default),
1100 3500K
Requires Magnetic Ballast, Fully Enclosed, 4 pack
1100 4000K*
Horizontal Type A G24d 2-Pin
Plug-In 1000 2700K
SpectraChoice™
1100 3000K
G24d 10.5 93300090 LED11G24d-H/8SC-4PK 24 6.6 80 13/18/26 50,000 - Damp Selectable Color Temperature (4000K Default),
1100 3500K
Requires Magnetic Ballast, Fully Enclosed, 4 pack
1100 4000K*

Type A - 2-pin Plug-in Lamps

Color Wattage
Bulb Base Lamp Order Carton MOL Lumens Temp* Replace- Rated Life DLC® Location
Shape Type Watts Code Description Qty 2
(In) (Initial) (Initial)
5
CRI ment L70 (Hrs)1 ID4 Rating3 Additional Information^
Type A GX23 2-pin
Plug-In GX23 5 91404 LED5GX23/827 6 6.7 500 2700K 80 13 50,000 - Damp Requires Magnetic Ballast, Fully Enclosed
GX23 5 91405 LED5GX23/830 6 6.7 530 3000K 80 13 50,000 - Damp Requires Magnetic Ballast, Fully Enclosed
GX23 5 91407 LED5GX23/835 6 6.7 545 3500K 80 13 50,000 - Damp Requires Magnetic Ballast, Fully Enclosed
GX23 5 91408 LED5GX23/840 6 6.7 560 4000K 80 13 50,000 - Damp Requires Magnetic Ballast, Fully Enclosed
GX23 5 91410 LED5GX23/850 6 6.7 565 5000K 80 13 50,000 - Damp Requires Magnetic Ballast, Fully Enclosed
Vertical Type A G24d 2-pin
Plug-In G24d 10.5 92988 LED11G24d-V/835 6 6.2 1050 3500K 80 13/18/26 50,000 - Damp Requires Magnetic Ballast, Fully Enclosed
G24d 10.5 92996 LED11G24d-V/840 6 6.2 1050 4000K 80 13/18/26 50,000 - Damp Requires Magnetic Ballast, Fully Enclosed
LED Lamps - Plug-in

1
The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original lumen output (L70)
2
Minimum order quantity = Carton Qty
3
UL 1993 Environmental Requirements for LED LAMPS
Damp Location – Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment, including partially protected locations
4
DLC® does not have a category for two-pin plug-in lamps
5
Lumen levels correspond with color temperature for selectable lamps
* Default color temperature setting is 4000K for selectable lamps
^
Check ballast compatibility at LED.com/LED2pin-compatibility

46 – www.LED.com/Lamps
 LumenChoice / SpectraChoice rev 08222
r1 r2 r3
LED Lamps - Plug-in - Type A
Type A - 4-pin Plug-ins
r4 r5 r6
4-PIN REPLACEMENT
HORIZONTAL VERTICAL
CONFIGURATION 9 Watt Replacement Bases CONFIGURATION

GX24Q-1 GX24q-2 GX24q-3

9 Watt
G24q-1 G24q-2 G24q-3

18.5 Watt Replacement Bases

LumenChoice / SpectraChoice rev 08222

18.5 Watt
GX24q-3 GX24q-4 9 Watt 18.5 Watt

LumenChoice ®

SpectraChoice™

Selectable SpectraChoice™ Type A - 4-pin Plug-in Lamps LumenChoice ®+

Bulb Base Lamp Order Carton MOL Lumens
Color
Temp*
Wattage
Replace- Rated Life Location
SpectraChoice™
Shape Type Watts Code Description Qty2 (In) (Initial)5 (Initial) CRI ment L70 (Hrs)1 DLC® ID4 Rating3 Additional Information^
Vertical Type A 4-pin
1000 2700K SpectraChoice™
1100 3000K Selectable Color Temperature (4000K Default),
Plug-In G24q/GX24q 9 93300089 LED9G24q-V/8SC-4PK 24 5.9 80 13/18/26 50,000 S-WU5YE2 Damp
1100 3500K Requires Electronic Ballast, Fully Enclosed, 4
1100 4000K* pack

Type A - 4-pin Plug-in Lamps

Color Wattage
Bulb Base Lamp Order Carton MOL Lumens Temp* Replace- Rated Life Location
Shape Type Watts Code Description Qty 2
(In) (Initial) (Initial)
5
CRI ment L70 (Hrs)1 DLC® ID4 Rating3 Additional Information#
Vertical Type A 4-pin
Plug-In G24q/GX24q 9 33969 LED9G24Q-V/830 6 5.9 1200 3000K 80 13/18/26 50,000 - Damp Requires Electronic Ballast, Fully Enclosed
GX24q 18.5 39288 LED19GX24q-V/827 6 6.42 1800 2700K 80 32/42 50,000 - Damp Requires Electronic Ballast
GX24q 18.5 39277 LED19GX24q-V/830 6 6.42 1850 3000K 80 32/42 50,000 - Damp Requires Electronic Ballast
GX24q 18.5 39275 LED19GX24q-V/835 6 6.42 1950 3500K 80 32/42 50,000 - Damp Requires Electronic Ballast
GX24q 18.5 39279 LED19GX24q-V/840 6 6.42 1950 4000K 80 32/42 50,000 - Damp Requires Electronic Ballast
Horizontal Type A 4-pin
Plug-In G24q/GX24q 9 33994 LED9G24Q-H/827 6 5.31 1100 2700K 80 13/18/26 50,000 S-6PKGMC Damp Requires Electronic Ballast, Fully Enclosed
G24q/GX24q 9 33997 LED9G24Q-H/830 6 5.31 1200 3000K 80 13/18/26 50,000 S-RVMH0C Damp Requires Electronic Ballast, Fully Enclosed
G24q/GX24q 9 33998 LED9G24Q-H/835 6 5.31 1200 3500K 80 13/18/26 50,000 S-HOEDLY Damp Requires Electronic Ballast, Fully Enclosed
G24q/GX24q 9 33999 LED9G24Q-H/840 6 5.31 1200 4000K 80 13/18/26 50,000 S-3FW29C Damp Requires Electronic Ballast, Fully Enclosed
GX24q 18.5 39289 LED19GX24q-H/827 6 6.7 1850 2700K 80 32/42 50,000 - Damp Requires Electronic Ballast
GX24q 18.5 39282 LED19GX24q-H/830 6 6.7 1850 3000K 80 32/42 50,000 - Damp Requires Electronic Ballast
GX24q 18.5 39276 LED19GX24q-H/835 6 6.7 1950 3500K 80 32/42 50,000 - Damp Requires Electronic Ballast
GX24q 18.5 39283 LED19GX24q-H/840 6 6.7 1950 4000K 80 32/42 50,000 - Damp Requires Electronic Ballast

Type A - High Lumen Biax 2G11 Plug-in Lamps

Color Wattage
Bulb Base Lamp Order Carton MOL Lumens Temp Replace- Rated Life Location
Shape Type Watts Code Description Qty2 (In) (Initial) (Initial) CRI ment L70 (Hrs)1 DLC® ID4 Rating3 Additional Information#
High Lumen Biax Type A (HLBX)
LED Lamps - Plug-in

HLBX 2G11 17 39073 LED172G11/830/10 10 22.3 2150 3000K 80 40 50,000 - Damp Instant or PRS Ballast
2G11 17 39074 LED172G11/835/10 10 22.3 2150 3500K 80 40 50,000 - Damp Instant or PRS Ballast
2G11 17 39075 LED172G11/840/10 10 22.3 2200 4000K 80 40 50,000 - Damp Instant or PRS Ballast
2G11 17 39076 LED172G11/850/10 10 22.3 2200 5000K 80 40 50,000 - Damp Instant or PRS Ballast

1
The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original lumen output (L70)
2
Minimum order quantity = Carton Qty
3
UL 1993 Environmental Requirements for LED LAMPS
Damp Location – Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment, including partially protected locations
4
Not all product variations on this page are DLC qualified. Visit qpl.designlights.org/solid-state-lighting to confirm qualification.
5
Lumen levels correspond with color temperature for selectable lamps
* Default color temperature setting is 4000K for selectable lamps
#
Check ballast compatibility at LED.com/LED4pin-compatibility for G24q/GX24q lamps. Check ballast compatibility at LED.com/LED2G11-compatibility for 2G11 lamps.

www.LED.com/Lamps – 47
 LED Lamps - Plug-in - Type B
LED Lamps – Type B Plug-ins

Type B LED plug-in lamps offer the opportunity to replace pin-based compact fluorescent lamps and eliminate
costs related to the ballasts. Type B lamps operate from mains voltage. The fixture is re-wired to bypass the
ballast. Horizontal and vertical orientation lamps are offered in order to minimize energy consumption and improve
fixture efficiency. Choose the lamp orientation that suits the application.

Lamp Drawings (not drawn to scale)

Base G23 GX23 GX23-2 G24 G24 G24 G24

G24d G24d G24d G24d
Fits In Sockets G23 GX23 GX23-2 G24q G24q G24q G24q
GX24q GX24q GX24q GX24q

Input Voltage 120-277 120-277 120-277 120-277 120-277 120-347 120-347

2700K SpectraChoice™ SpectraChoice™

2700K 2700K 2700K 2700K
3000K 2700K 2700K
3000K 3000K 3000K 3000K
Color Temperature 3500K 3000K 3000K
3500K 3500K 3500K 3500K
4000K 3500K 3500K
4000K 4000K 4000K 4000K
5000K 4000K 4000K

Rated Life (L70) 50,000 50,000 20,000 20,000 50,000 50,000 50,000

Lumens 500 500 800 850 1200 1100 1850

Omnidirec- Omnidirec- Omnidirec-
Light Distribution Directional Directional Directional Directional
tional tional tional
Wattage 5W 5W 7.5W 7.5W 10W 10.5W 18W

CFL Equivalent 7/9W 13W 13W 13W 18W 13/18/26W 32/42W

Heat sink for thermal

managment enables Plastic lens provides
long life excellent diffusion

G24 Type B plug-in

bases can be used in
LED Lamps - Plug-in

a variety of sockets
Type B
G24
Vertical

Type B G24
Horizontal

Horizontal orientation
lamps feature a
rotatable base

48 – www.LED.com/Lamps
LED Lamps - Plug-in - Type B
Catalog Logic:
Bulb Shape: Color Rendering Index (CRI or R):
Bulb shape followed by its size (the An indication of the ability of the lamp to render object
maximum diameter of the bulb colors in a normal natural way. The higher the number
expressed in eighths of an inch). (0-100), the better the color appearance.
Watts: Selectable Color Temp. (K): Rated Life L70:
Energy Used (as A selectable switch to choose Hours of operation the lamp will provide before
defined by FTC "warmth" or "coolness" of the reaching 70% of its original lumen output
Lamp Label Rules) light from the lamp. The higher
the value, the whiter or "cooler" DLC:
the light appears. Indicates whether product is listed on
Order Code: the DesignLights Consortium Qualified
Lumens: Wattage Products List
Use the order Volts:
Light output (as defined Replacement:
Base Type: code when Lamp data is based on
by FTC Lamp Label Rules) Wattage of
ANSI Base ordering to operation at rated voltage
Traditional Lamp
ensure that Location Rating:
MOL (in): the LED Lamp is
you receive the Location Rating as defined
Maximum Overall meant to replace
exact product for LED Lamps by UL 1993
Length in inches
you require

Description: Carton Quantity: Additional Information:

Lamp Model Number of lamps Typical application and/or
Description packed in a carton other important information

Selectable
Color Wattage
Bulb Base Order Carton MOL Lumens Temp. Replace- Rated Life Location
Shape Type Watts Code Description Volts Qty2 (In) (Initial)5 (Initial)* CRI ment L70 (Hrs)1 DLC®4 Rating3 Additional Information
Vertical Type B 2-pin - Fits in G24d and G24q sockets - Selectable Color Temperature - Ballast Bypass
Plug-In
1000 2700K SpectraChoice™ (4000K Default)
1100 3000K Selectable Color Temperature,
G24 10.5 93300088 LED11BG24-V/8SC/120-347-4PK 120-347 24 5.9 80 13/18/26 50,000 - Damp
1100 3500K Ballast Bypass, Fully Enclosed,
1100 4000K 4 pack

LED11BG24-H/8SC/120-347-4PK
Wattage 4PK = Inner pack of 4 lamps
Base (Smallest unit of sale downstream)
B = Type B Voltage Range
CRI (8 = 80) SC = SpectraChoice
Orientation
(Selectable CCT)
(H = Horizontal, V = Vertical, O = Omnidirectional)

GR10q-4
(2D4P)

Base Identification (not drawn to scale)

LED Lamps - Plug-in

2G11-4
2G11 Base G23 Base GX23 Base GX23-2 Base G24 Base
(HLBX)
Replaces 2G11 Replaces G23 Replaces GX23 Replaces GX23-2 Replaces
G24d, G24q, GX24q

www.LED.com/Lamps – 49
 LED Lamps /-SpectraChoice
LumenChoice Plug-in - Type B
rev 082222 v1
LED Lamps – SpectraChoice™ Type B Plug-ins

SpectraChoice™ Type B Plug-in lamps feature built-in switches to select color temperature.
LumenChoice
Horizontal and vertical orientation lamps are offered in®order to minimize energy consumption
and improve fixture efficiency. Choose the lamp orientation that suits the application. LumenCho

SpectraChoice™ SpectraCho

LumenChoice ®+ LumenCho
SpectraChoice™ SpectraCho
LED Lamps - Plug-in

50 – www.LED.com/Lamps
LED Lamps - Plug-in - Type B
Type B LED plug-in lamps can be used in a variety of compact fluorescent sockets. By re-wiring the socket and
eliminating concerns related to ballast compatibility, a single lamp can fit and operate in a wider variety of sockets.
Type B LED plug-in lamp bases do not have exclusionary features related to specific wattages like CFL lamps do. A
2-pin G24 lamp can fit in 2-pin G24d or 4-pin G24q/GX24q sockets as shown below.
Wiring Diagram for G24d 2-pin Sockets

Compact Fluorescent
G24d 2-pin Bases
x x
LED G24
G24d-1 G24d-2 G24d-3
2-pin Base Ballast
Works in
2-pin G24d
x x
Compact Fluorescent
& 4-pin
G24q 4-pin Bases L N L N
G24q/GX24q
Sockets Wiring Diagram for G24q/GX24q 4-pin Sockets
G24q-1 G24q-2 G24q-3
G24
(LED Type B)

x x xx xx
Compact Fluorescent
GX24q 4-pin BasesBallast Ballast
x x x x
L N
GX24q-1 L
GX24q-2 N
GX24q-3 L N L N

Ballast Bypass Selectable SpectraChoice™ G24 Plug-in Lamps - Type B

Selectable
Color Wattage
Bulb Base Carton Lumens Temp. Replace- Rated Life DLC® Location
Shape Type Watts Order Code Description Volts Qty2 MOL (In) (Initial)5 (Initial)* CRI ment L70 (Hrs)1 ID4 Rating3 Additional Information
Vertical Type B 2-pin - Fits in G24d and G24q sockets - Selectable Color Temperature - Ballast Bypass
Plug-In
1000 2700K SpectraChoice™ Selectable
1100 3000K Color Temperature (4000K
G24 10.5 93300088 LED11BG24-V/8SC/120-347-4PK 120-347 24 5.9 80 13/18/26 50,000 - Damp
1100 3500K Default), Ballast Bypass, Fully
1100 4000K* Enclosed, 4 pack

1850 2700K SpectraChoice™ Selectable

1850 3000K Color Temperature (4000K
G24 18 93312489 LED18BG24-V/8SC/120-347 120-347 12 6.5 80 32/42 50,000 - Damp
1850 3500K Default), Ballast Bypass, Fully
1850 4000K* Enclosed

Horizontal Type B 2-pin - Fits in G24d and G24q sockets - Selectable Color Temperature - Ballast Bypass
Plug-In
1000 2700K SpectraChoice™ Selectable
1100 3000K Color Temperature (4000K
G24 10.5 93300087 LED11BG24-H/8SC/120-347-4PK 120-347 24 6.4 80 13/18/26 50,000 - Damp
1100 3500K Default), Ballast Bypass, Fully
1100 4000K* Enclosed, 4 pack

1850 2700K SpectraChoice™ Selectable

1850 3000K Color Temperature (4000K
G24 18 93312525 LED18BG24-H/8SC/120-347 120-347 12 6.8 80 32/42 50,000 - Damp
1850 3500K Default), Ballast Bypass, Fully
1850 4000K* Enclosed
LED Lamps - Plug-in

1
The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original lumen output (L70)
2
Minimum order quantity = Carton Qty
3
UL 1993 Environmental Requirements for LED LAMPS
Damp Location – Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment, including partially protected locations
4
DLC® does not have a category for two-pin plug-in lamps
5
Lumen levels correspond with color temperature
* Default color temperature setting is 4000K

www.LED.com/Lamps – 51
 LED Lamps - Plug-in - Type B

G24 Base
Replaces G24d & G24q

Ballast Bypass Omnidirectional G24 Plug-in Lamps - Type B

Color
Bulb Base Carton MOL MOD Lumens Temp. Wattage Rated Life DLC® Location
Shape Type Watts Order Code Description Volts Qty2 (In) (in) (Initial) (Initial) CRI Replacement L70 (Hrs)1 ID4 Rating3 Additional Information
Omnidirectional Type B 2-pin - Fits in G24d and G24q sockets - Ballast Bypass
G24 7.5 93300068 LED8BG24-O/827-4PK 120-277 24 4.4 1.5 800 2700K 80 13 20,000 - Damp Fully Enclosed, 4 pack
G24 7.5 93300069 LED8BG24-O/830-4PK 120-277 24 4.4 1.5 850 3000K 80 13 20,000 - Damp Fully Enclosed, 4 pack
G24 7.5 93300080 LED8BG24-O/835-4PK 120-277 24 4.4 1.5 850 3500K 80 13 20,000 - Damp Fully Enclosed, 4 pack
G24 7.5 93300081 LED8BG24-O/840-4PK 120-277 24 4.4 1.5 850 4000K 80 13 20,000 - Damp Fully Enclosed, 4 pack
Omnidirectional Type B 2-pin - Fits in G24d and G24q sockets - Ballast Bypass
G24 10 93300082 LED10BG24-O/827-4PK 120-277 24 5.4 1.8 1100 2700K 80 18 50,000 - Damp Fully Enclosed, 4 pack
G24 10 93300083 LED10BG24-O/830-4PK 120-277 24 5.4 1.8 1200 3000K 80 18 50,000 - Damp Fully Enclosed, 4 pack
G24 10 93300084 LED10BG24-O/835-4PK 120-277 24 5.4 1.8 1200 3500K 80 18 50,000 - Damp Fully Enclosed, 4 pack
G24 10 93300086 LED10BG24-O/840-4PK 120-277 24 5.4 1.8 1200 4000K 80 18 50,000 - Damp Fully Enclosed, 4 pack

GX23-2 Base
Replaces GX23-2

Ballast Bypass Omnidirectional GX23-2 Plug-in Lamps - Type B

Color Wattage
Bulb Base Carton MOL MOD Lumens Temp Replace- Rated Life DLC® Location
Shape Type Watts Order Code Description Volts Qty2 (In) (in) (Initial) (Initial) CRI ment L70 (Hrs)1 ID4 Rating3 Additional Information
Omnidirectional GX23-2 Plug-in Type B - Ballast Bypass
LED Lamps - Plug-in

Plug-In GX23-2 7.5 93312531 LED8BGX23-2-O/827 120-277 24 4.7 1.5 800 2700K 80 13 20,000 - Damp Ballast Bypass, Fully Enclosed
GX23-2 7.5 93312537 LED8BGX23-2-O/830 120-277 24 4.7 1.5 800 3000K 80 13 20,000 - Damp Ballast Bypass, Fully Enclosed
GX23-2 7.5 93312543 LED8BGX23-2-O/835 120-277 24 4.7 1.5 800 3500K 80 13 20,000 - Damp Ballast Bypass, Fully Enclosed
GX23-2 7.5 93312549 LED8BGX23-2-O/840 120-277 24 4.7 1.5 800 4000K 80 13 20,000 - Damp Ballast Bypass, Fully Enclosed

1
The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original lumen output (L70)
2
Minimum order quantity = Carton Qty
3
UL 1993 Environmental Requirements for LED LAMPS
Damp Location – Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment, including partially protected locations
4
DLC® does not have a category for two-pin plug-in lamps

52 – www.LED.com/Lamps
LED Lamps - Plug-in - Type B

G23 Base
Replaces G23

Ballast Bypass G23 Plug-in Lamps - Type B

Color Wattage
Bulb Base Carton Lumens Temp. Replace- Rated Life DLC® Location
Shape Type Watts Order Code Description Volts Qty2 MOL (In) (Initial) (Initial) CRI ment L70 (Hrs)1 ID4 Rating3 Additional Information
G23 Plug-In Type B - Ballast Bypass
Plug-In G23 5 93312465 LED5BG23/827 120-347 24 5.4 500 2700K 80 7/9 50,000 - Damp Ballast Bypass, Fully Enclosed
G23 5 93312471 LED5BG23/830 120-347 24 5.4 500 3000K 80 7/9 50,000 - Damp Ballast Bypass, Fully Enclosed
G23 5 93312477 LED5BG23/835 120-347 24 5.4 500 3500K 80 7/9 50,000 - Damp Ballast Bypass, Fully Enclosed
G23 5 93312483 LED5BG23/840 120-347 24 5.4 500 4000K 80 7/9 50,000 - Damp Ballast Bypass, Fully Enclosed

GX23 Base
Replaces GX23

Ballast Bypass GX23 Plug-in Lamps - Type B

Color Wattage
Bulb Base Carton Lumens Temp. Replace- Rated Life DLC® Location
Shape Type Watts Order Code Description Volts Qty2 MOL (In) (Initial) (Initial) CRI ment L70 (Hrs)1 ID4 Rating3 Additional Information
GX23 Plug-in Type B - Ballast Bypass
Plug-In GX23 5 93312495 LED5BGX23/827 120-277 24 6.8 500 2700K 80 13 50,000 - Damp Ballast Bypass, Fully Enclosed
GX23 5 93312501 LED5BGX23/830 120-277 24 6.8 500 3000K 80 13 50,000 - Damp Ballast Bypass, Fully Enclosed
GX23 5 93312507 LED5BGX23/835 120-277 24 6.8 500 3500K 80 13 50,000 - Damp Ballast Bypass, Fully Enclosed
GX23 5 93312513 LED5BGX23/840 120-277 24 6.8 500 4000K 80 13 50,000 - Damp Ballast Bypass, Fully Enclosed
GX23 5 93312519 LED5BGX23/850 120-277 24 6.8 500 5000K 80 13 50,000 - Damp Ballast Bypass, Fully Enclosed

Ballast Bypass High Lumen Biax 2G11 Plug-in Lamps - Type B

Color
Bulb Base Carton Lumens Temp Wattage Rated Life DLC® Location
LED Lamps - Plug-in

Shape Type Watts Order Code Description Volts Qty2 MOL (In) (Initial) (Initial) CRI Replacement L70 (Hrs)1 ID4 Rating3 Additional Information
High Lumen Biax Type B (HLBX) - Ballast Bypass
HLBX 2G11 17 93136025 LED17B2G11/830 120-277 10 22.3 2100 3000K 80 40 50,000 - Damp
2G11 17 93136086 LED17B2G11/835 120-277 10 22.3 2100 3500K 80 40 50,000 - Damp
2G11 17 93136087 LED17B2G11/840 120-277 10 22.3 2200 4000K 80 40 50,000 - Damp
2G11 17 93136088 LED17B2G11/850 120-277 10 22.3 2200 5000K 80 40 50,000 - Damp

1
The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original lumen output (L70)
2
Minimum order quantity = Carton Qty
3
UL 1993 Environmental Requirements for LED LAMPS
Damp Location – Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment, including partially protected locations
4
Not all product variations on this page are DLC qualified. DLC® does not have a category for two-pin plug-in lamps. Visit qpl.designlights.org/solid-state-lighting to confirm qualification.

www.LED.com/Lamps – 53
 LED Lamps - Directional
LED Lamps – PARs

Current offers LED PAR lamps featuring the exclusive Visual Comfort Lens design. With advanced optics and
reduced glare, these lamps offer the light qualities desired by merchants for retail applications.

High output and value lines are also available to serve applications needing higher lumens or when advanced
optics are not required.

Advanced optics of Retail PARs

include a reflector and Fresnel
lens to reduce glare

Visual Comfort Lens

PAR38
LED Lamps - Directional

High Output lamps

feature finned heat
sinks for improved
thermal management PAR30
(High Output)

54 – www.LED.com/Lamps
LED Lamps - Directional
Catalog Logic:

Color Rendering Index (CRI or R):

Bulb Shape: An indication of the ability of the
Bulb shape lamp to render object colors in a Dimmable:
followed by Lumens:
Watts: normal natural way. The higher the Indicates whether a lamp
its size (the Light output (as defined
Energy Used (as number (0-100), the better the color is dimmable or not
maximum by FTC Lamp Label Rules)
defined by FTC appearance.
diameter Lamp Label Rules) ENERGY STAR Status:
of the bulb
MOL (in): ENERGY STAR® status: ENERGY STAR®
expressed
Maximum Overall Color Temperature (K): certified. Lamps without a " " are not
in eighths of Wattage Replacement:
Length in inches A measure of the visual ENERGY STAR® certified.
an inch). Wattage of Traditional
"warmth" or "coolness"
Order Code: Lamp the LED Lamp is
Base Type: of the light from the
Use the order meant to replace Location Rating:
ANSI Base lamp. The higher
code when Location Rating as defined
the value, the whiter
ordering to for LED Lamps by UL 1993
Volts: or "cooler" the light
ensure that
Lamp data is based appears.
you receive the Additional Information:
on operation at Rated Life L70:
exact product Typical application and/or
rated voltage Hours of operation
you require other important information
CBCP: the lamp will provide
Carton Quantity: Center before reaching 70%
Description: of its original lumen
Number of lamps Beam Housing
Lamp Model output Beam
packed in a carton Candle Color:
Description Angle:
Power Color of
Degrees
lamp body

Car- Color Wattage ENERGY

Bulb Base Order ton MOL Lumens Temp. Replace- Rated Life Dim- STAR® Location Beam Housing Additional
Shape Type Watts Code Description Volts Qty (in) (Initial) CBCP (Initial) CRI ment
2
L70 (Hrs) mable Status
1
Rating3 Angle Color Information
PAR38 - Low Glare - Visual Comfort Lens
PAR38 E26 18 87917 LED18D38OW3835/40 120 6 5.31 1700 4400 3500K 81 150 25,000 Yes  Wet 40° White

LED18D38OW3835/40
Beam Angle (40 = 40 degrees)
Wattage
D = Dimmable
Generational indicator CCT (35 = 3500K)
Bulb Shape
(P=PAR, sometimes CRI (8 = 80)
dropped for space)
Body color (W= White)
O = Outdoor
(Wet rated)

Lamp Drawings (not drawn to scale)

PAR16 PAR20 PAR30 LED Lamps - Directional

PAR38HO
PAR38

PAR30L PAR30LHO

www.LED.com/Lamps – 55
 LED Lamps - Directional
Directional Lamps (PAR16 - PAR20)
Color Wattage ENERGY
Bulb Base Order Carton MOL Lumens Temp. Replace- Rated Life Dim- STAR® Location Beam Housing Additional
Shape Type Watts Code Description Volts Qty2 (in) (Initial) CBCP (Initial) CRI ment L70 (Hrs)1 mable Status Rating3 Angle Color Information
Compact PAR16

PAR16 E26 6 93305603 LED6DP16W830/35-6PK 120 24 3.0 550 1000 3000K 80 60 25,000 Yes  Damp 35° White 6 pack

Compact PAR20
PAR20 E26 7 93349 LED7DP203B827/20 120 6 3.5 500 3600 2700K 80 50 25,000 Yes  Damp 20° Black
E26 7 93360 LED7DP203W827/20 120 6 3.5 500 3600 2700K 80 50 25,000 Yes  Damp 20° White
E26 7 93107783 LED7DP203B927/35 120 6 3.5 430 1000 2700K 90 50 25,000 Yes - Damp 35° Black
E26 7 93311901 LED7DP20OB927/35 120 6 3.5 500 966 2700K 90 50 25,000 Yes - Wet 35° Black CEC Title 20
E26 7 93354 LED7DP203B827/35 120 6 3.5 500 1150 2700K 80 50 25,000 Yes  Damp 35° Black
E26 7 93107782 LED7DP203W927/35 120 6 3.5 430 1000 2700K 90 50 25,000 Yes - Damp 35° White
E26 7 93311900 LED7DP20OW927/35 120 6 3.5 500 966 2700K 90 50 25,000 Yes - Wet 35° White CEC Title 20
E26 7 93362 LED7DP203W827/35 120 6 3.5 500 1150 2700K 80 50 25,000 Yes  Damp 35° White
E26 7 93327 LED7DP203B830/20 120 6 3.5 520 3600 3000K 80 50 25,000 Yes  Damp 20° Black
E26 7 93347 LED7DP203W830/20 120 6 3.5 520 3600 3000K 80 50 25,000 Yes  Damp 20° White
E26 7 93311903 LED7DP20OB930/35 120 6 3.5 520 966 3000K 90 50 25,000 Yes - Wet 35° Black CEC Title 20
E26 7 93311902 LED7DP20OW930/35 120 6 3.5 520 966 3000K 90 50 25,000 Yes - Wet 35° White CEC Title 20
E26 7 93348 LED7DP203W830/35 120 6 3.5 520 1200 3000K 80 50 25,000 Yes  Damp 35° White

Directional Lamps (PAR30 - Visual Comfort Lens)

Color Wattage ENERGY
Bulb Base Order Carton MOL Lumens Temp. Replace- Rated Life Dim- STAR® Location Beam Housing Additional
Shape Type Watts Code Description Volts Qty 2
(in) (Initial) CBCP (Initial) CRI ment L70 (Hrs) mable Status Rating3 Angle Color Information
1

PAR30 - Low Glare - Visual Comfort Lens

PAR30 E26 12 93311923 LED12DP30RW927/25 120 6 3.6 1050 3800 2700K 90 75 25,000 Yes  Damp 25° White CEC Title 20
E26 12 42133 LED12DP30RW82725 120 6 3.74 1000 4700 2700K 80 75 25,000 Yes  Damp 25° White
E26 12 93311925 LED12DP30RB927/40 120 6 3.6 1050 2200 2700K 90 75 25,000 Yes  Damp 40° Black CEC Title 20
E26 12 93107784 LED12DP30RB927/40 120 6 3.74 850 1700 2700K 90 75 25,000 Yes - Damp 40° Black
E26 12 84395 LED12DP30RW92740 120 6 3.74 850 1700 2700K 90 75 25,000 Yes  Damp 40° White
E26 12 93311924 LED12DP30RW927/40 120 6 3.6 1050 2200 2700K 90 75 25,000 Yes  Damp 40° White CEC Title 20
E26 12 42134 LED12DP30RW82740 120 6 3.74 1000 2200 2700K 80 75 25,000 Yes  Damp 40° White
E26 12 84379 LED12DP30RW93025 120 6 3.74 900 3900 3000K 90 75 25,000 Yes  Damp 25° White
E26 12 93311926 LED12DP30RW930/25 120 6 3.6 1050 3900 3000K 90 75 25,000 Yes  Damp 25° White CEC Title 20
E26 12 84384 LED12DP30RW83025 120 6 3.74 1050 4800 3000K 80 75 25,000 Yes  Damp 25° White
E26 12 93311927 LED12DP30RW930/40 120 6 3.6 1050 2200 3000K 90 75 25,000 Yes  Damp 40° White CEC Title 20
E26 12 42131 LED12DP30RW83040 120 6 3.74 1050 2400 3000K 80 75 25,000 Yes  Damp 40° White
PAR30 Long Neck - Low Glare - Visual Comfort Lens
PAR30L E26 12 93312005 LED12DP30LRW927/25 120 6 4.7 1050 3800 2700K 90 75 25,000 Yes  Damp 25° White CEC Title 20
E26 12 84407 LED12DP3LRW92740 120 6 4.72 850 1700 2700K 90 75 25,000 Yes  Damp 40° White
E26 12 93312006LED12DP30LRW927/40 120 6 4.7 1050 2200 2700K 90 75 25,000 Yes  Damp 40° White CEC Title 20
E26 12 42144 LED12DP3LRW82740 120 6 4.72 1000 2200 2700K 80 75 25,000 Yes  Damp 40° White
E26 12 84399 LED12DP3LRW93025 120 6 4.72 900 3900 3000K 90 75 25,000 Yes  Damp 25° White
E26 12 93312007 LED12DP30LRW930/25 120 6 4.7 1050 3900 3000K 90 75 25,000 Yes  Damp 25° White CEC Title 20
E26 12 42136 LED12DP3LRW83025 120 6 4.72 1050 4800 3000K 80 75 25,000 Yes  Damp 25° White
E26 12 93312008 LED12DP30LRW930/40 120 6 4.7 1050 2200 3000K 90 75 25,000 Yes  Damp 40° White CEC Title 20
E26 12 42137 LED12DP3LRW83040 120 6 4.72 1050 2400 3000K 80 75 25,000 Yes  Damp 40° White

Directional Lamps (PAR30 - Value)

Color Wattage ENERGY
Bulb Base Order Carton MOL Lumens Temp. Replace- Rated Life Dim- STAR® Location Beam Housing Additional
Shape Type Watts Code Description Volts Qty 2
(in) (Initial) CBCP (Initial) CRI ment L70 (Hrs) mable Status Rating3 Angle Color Information
1

PAR30 - TIR Lens

PAR30 E26 12 93153892 LED12DP30VOW830/25-4PK 120 16 3.66 850 3400 3000K 80 75 15,000 Yes - Wet 25° White 4 pack
PAR30 Long Neck - TIR Lens
PAR30L E26 12 93153891 LED12DP30LVOW830/ 25-4PK 120 16 4.69 850 3400 3000K 80 75 15,000 Yes - Wet 25° White 4 pack

Directional Lamps (PAR30 - High Output)

LED Lamps - Directional

Car- Color Wattage ENERGY

Bulb Base Order ton MOL Lumens Temp. Replace- Rated Life Dim- STAR® Location Beam Housing Additional
Shape Type Watts Code Description Volts Qty (in) (Initial) CBCP (Initial) CRI
2
ment L70 (Hrs) mable Status Rating3 Angle Color Information
1

PAR 30 Long Neck - High Output - Universal 120-277V

PAR30HO E26 18 75089 LED18P30LW83015 120-277 6 4.6 1800 15500 3000K 80 75 25,000 -  Damp 15° White
E26 18 75091 LED18P30LW83025 120-277 6 4.6 1800 7000 3000K 80 75 25,000 -  Damp 25° White
E26 18 75065 LED18P30LW93015 120-277 6 4.6 1400 12500 3000K 90 75 25,000 -  Damp 15° White
E26 18 75078 LED18P30LW93025 120-277 6 4.6 1400 5000 3000K 90 75 25,000 -  Damp 25° White
1
The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original lumen output (L70)
2
Minimum order quantity = Carton Qty
ENERGY STAR® status: ENERGY STAR® certified. Lamps without a " " are not ENERGY STAR® certified.
3
UL 1993 Environmental Requirements for LED LAMPS
Damp Location – Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment, including partially protected locations
Wet Location – Location in which water or other liquid can drip, splash, or flow on or against electrical equipment.
When installing outdoors, ensure the socket used is suitably Listed for use in Wet locations and socket gaskets provided by the manufacturer are correctly attached.
^ GE Lighting, a Savant company, lamp, distributed Current Lighting Solutions, LLC.

56 – www.LED.com/Lamps
LED Lamps - Directional
Directional Lamps (PAR38 - Visual Comfort Lens)
Color Wattage ENERGY
Bulb Base Order Carton MOL Lumens Temp. Replace- Rated Life Dim- STAR® Location Beam Housing Additional
Shape Type Watts Code Description Volts Qty 2
(in) (Initial) CBCP (Initial) CRI ment L70 (Hrs) mable Status
1
Rating3 Angle Color Information
PAR38 - Low Glare - Visual Comfort Lens
PAR38 E26 12 93311944 LED12DP38ROW927/25 120 6 5.2 1050 5400 2700K 90 100 25,000 Yes  Wet 25° White CEC Title 20
E26 12 93311945 LED12DP38ROW927/40 120 6 5.2 1050 2300 2700K 90 100 25,000 Yes  Wet 40° White CEC Title 20
E26 12 92971 LED12D38W3827/40 120 6 5.31 1050 2300 2700K 81 100 25,000 Yes  Damp 40° White
E26 12 93311946 LED12DP38ROW930/25 120 6 5.2 1050 5400 3000K 90 100 25,000 Yes  Wet 25° White CEC Title 20
E26 12 92972 LED12D38W3830/25 120 6 5.31 1050 5500 3000K 81 100 25,000 Yes  Damp 25° White
E26 12 93311947 LED12DP38ROW930/40 120 6 5.2 1050 2300 3000K 90 100 25,000 Yes  Wet 40° White CEC Title 20
E26 12 92973 LED12D38OW3830/40 120 6 5.31 1050 2300 3000K 80 100 25,000 Yes  Wet 40° White
E26 16 93313077 LED16DP38ROW930/15 120 6 5.2 1550 15000 3000K 90 120 25,000 Yes - Wet 15° White CEC Title 20
E26 16 93313079 LED16DP38ROW830/15 120 6 5.2 1800 18000 3000K 80 120 25,000 Yes - Wet 15° White
E26 16 93313081 LED16DP38ROS830/15 120 6 5.2 1800 18000 3000K 80 120 25,000 Yes - Wet 15° Silver
E26 18 92923 LED18D38W3927/25 120 6 5.31 1250 4900 2700K 92 100 25,000 Yes  Damp 25° White
E26 18 93311929 LED18DP38ROW927/25 120 6 5.2 1550 5800 2700K 90 120 25,000 Yes  Wet 25° White CEC Title 20
E26 18 92950 LED18D38OW3827/25 120 6 5.31 1550 5800 2700K 81 120 25,000 Yes  Wet 25° White
E26 18 93311930 LED18DP38ROW927/40 120 6 5.2 1550 3700 2700K 90 150 25,000 Yes  Wet 40° White CEC Title 20
E26 18 92958 LED18D38OW3827/40 120 6 5.31 1550 3800 2700K 81 120 25,000 Yes  Wet 40° White
E26 18 92927 LED18D38W3930/15 120 6 5.31 1350 15000 3000K 92 75 25,000 Yes  Damp 15° White
E26 18 92961 LED18D38W3830/15 120 6 5.31 1750 20000 3000K 81 150 25,000 Yes  Damp 15° White
E26 18 93096546 LED18D38S3830/15 120 6 5.31 1750 20000 3000K 80 150 25,000 Yes - Damp 15° Silver
E26 18 93311932 LED18DP38ROB930/25 120 6 5.2 1550 6000 3000K 90 120 25,000 Yes  Wet 25° Black CEC Title 20
E26 18 93311931 LED18DP38ROW930/25 120 6 5.2 1550 6000 3000K 90 120 25,000 Yes  Wet 25° White CEC Title 20
E26 18 92963 LED18D38OW3830/25 120 6 5.31 1550 6000 3000K 81 120 25,000 Yes  Wet 25° White
E26 18 93311933 LED18DP38ROS930/25 120 6 5.2 1550 6000 3000K 90 120 25,000 Yes  Wet 25° Silver CEC Title 20
E26 18 93096804 LED18D38OS3830/25 120 6 5.31 1550 6000 3000K 80 150 25,000 Yes - Wet 25° Silver
E26 18 92934 LED18D38W3930/40 120 6 5.31 1350 3200 3000K 92 120 25,000 Yes  Damp 40° White
E26 18 93311934 LED18DP38ROW930/40 120 6 5.2 1550 3800 3000K 90 150 25,000 Yes  Wet 40° White CEC Title 20
E26 18 92967 LED18D38OW3830/40 120 6 5.31 1550 4000 3000K 81 150 25,000 Yes  Wet 40° White
E26 18 93311935 LED18DP38ROW935/25 120 6 5.2 1700 6500 3500K 90 120 25,000 Yes  Wet 25° White CEC Title 20
E26 18 85085 LED18D38OW3835/25 120 6 5.31 1700 6500 3500K 81 120 25,000 Yes  Wet 25° White
E26 18 93311936 LED18DP38ROW935/40 120 6 5.2 1700 4200 3500K 90 150 25,000 Yes  Wet 40° White CEC Title 20
E26 18 87917 LED18D38OW3835/40 120 6 5.31 1700 4400 3500K 81 150 25,000 Yes  Wet 40° White
E26 18 93311937 LED18DP38ROW940/25 120 6 5.2 1700 6500 4000K 90 120 25,000 Yes  Wet 25° White CEC Title 20
E26 18 93171 LED18D38OW3840/25 120 6 5.31 1700 6500 4000K 81 120 25,000 Yes  Wet 25° White
E26 18 93311938 LED18DP38ROW940/40 120 6 5.2 1700 4200 4000K 90 150 25,000 Yes  Wet 40° White CEC Title 20
E26 18 93172 LED18D38OW3840/40 120 6 5.31 1700 4400 4000K 81 150 25,000 Yes  Wet 40° White
E26 18 93311939 LED18DP38ROW950/25 120 6 5.2 1700 6500 5000K 90 120 25,000 Yes  Wet 25° White CEC Title 20
E26 18 65730 LED18D38OW3850/25 120 6 5.31 1700 6500 5000K 81 120 25,000 Yes  Wet 25° White
E26 18 93311940 LED18DP38ROW950/40 120 6 5.2 1700 4200 5000K 90 150 25,000 Yes  Wet 40° White CEC Title 20
E26 18 65731 LED18D38OW3850/40 120 6 5.31 1700 4400 5000K 81 150 25,000 Yes  Wet 40° White

Directional Lamps (PAR38 – High Output)

Car- Color Wattage ENERGY Additional
Bulb Base Order ton MOL Lumens Temp. Replace- Rated Life Dim- STAR® Location Beam Housing Informa-
Shape Type Watts Code Description Volts Qty (in) (Initial) CBCP (Initial) CRI ment
2
L70 (Hrs) mable Status
1
Rating Angle Color tion
3

PAR 38 - High Output - TIR Lens

PAR30 E26 32 75447 LED32DP38W830/15 120 6 5.12 3000 26000 3000K 82 250 25,000 Yes  Wet 15° White
E26 32 88801 LED32DP38W830/25 120 6 5.12 3000 13000 3000K 80 250 25,000 Yes  Wet 25° White
E26 32 88810 LED32DP38W830/40 120 6 5.12 3000 6000 3000K 80 250 25,000 Yes  Wet 40° White
E26 32 30233 LED32DP38W835/15 120 6 5.12 3100 25000 3500K 80 250 25,000 Yes  Wet 15° White
E26 32 30237 LED32DP38W835/25 120 6 5.12 3100 13000 3500K 80 250 25,000 Yes  Wet 25° White
E26 32 30239 LED32DP38W835/40 120 6 5.12 3100 6000 3500K 80 250 25,000 Yes  Wet 40° White
E26 32 20109 LED32P38W830/15 120-277 6 5.12 3000 25000 3000K 80 250 25,000 -  Wet 15° White
E26 32 20130 LED32P38W830/25 120-277 6 5.12 3000 13000 3000K 80 250 25,000 -  Wet 25° White
E26 32 20137 LED32P38W830/40 120-277 6 5.12 3000 6000 3000K 80 250 25,000 -  Wet 40° White

Directional Lamps (PAR38 - Value)

LED Lamps - Directional

Car- Color Wattage ENERGY

Bulb Base Order ton MOL Lumens Temp. Replace- Rated Life Dim- STAR® Location Beam Housing Additional
Shape Type Watts Code Description Volts Qty (in) (Initial) CBCP (Initial) CRI ment
2
L70 (Hrs) mable Status
1
Rating3 Angle Color Information
PAR38 - TIR Lens

E26 15 93153880 LED15DP38VOW830/35-4PK 120 16 5.31 1300 2300 3000K 80 90 15,000 Yes - Wet 35° White 4 pack

1
The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original lumen output (L70)
2
Minimum order quantity = Carton Qty
ENERGY STAR® status: ENERGY STAR® certified. Lamps without a " " are not ENERGY STAR® certified.
3
UL 1993 Environmental Requirements for LED LAMPS
Damp Location – Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment, including partially protected locations
Wet Location – Location in which water or other liquid can drip, splash, or flow on or against electrical equipment
When installing outdoors, ensure the socket used is suitably Listed for use in Wet locations and socket gaskets provided by the manufacturer are correctly attached.

www.LED.com/Lamps – 57
 LED Lamps - Directional
LED Lamps – MR16s

LED MR16 lamps are the perfect solution for high output in decorative lighting applications. The lamps are dimmable,
long-lasting and available in a variety of beam angles and color temperatures.

MR16s are available

in a variety of beam
angles

MR16 with
GU5.3 base

Internal driver works

with low voltage
transformers

Lamp Drawings (not drawn to scale)

LED Lamps - Directional

MR16
MR16
GU10

58 – www.LED.com/Lamps
LED Lamps - Directional
Catalog Logic:
Bulb Shape:
Color Temperature (K):
Bulb shape ENERGY STAR Status:
A measure of the visual "warmth" or
followed by ENERGY STAR® status: ENERGY
Lumens: "coolness" of the light from the lamp.
its size (the STAR® certified. Lamps without a " "
Light output (as defined The higher the value, the whiter or
maximum Watts: are not ENERGY STAR® certified.
by FTC Lamp Label Rules) "cooler" the light appears.
diameter Energy Used (as
of the bulb defined by FTC Color Rendering Index (CRI or R):
MOL (in):
expressed in Lamp Label Rules) An indication of the ability of the lamp to render
Maximum Overall
eighths of an object colors in a normal natural way. The higher the
Length in inches
inch). CBCP: number (0-100), the better the color appearance.
Order Code: Carton Quantity: Center
Use the order Number of lamps Beam Wattage Replacement:
code when packed in a carton Candle Wattage of Traditional Lamp the
Base Type: ordering to Power LED Lamp is meant to replace
ensure that Volts:
ANSI Base Additional Information:
Lamp data is based Dimmable:
you receive the Typical application
on operation at rated Indicates whether a lamp
exact product and/or other important
voltage is dimmable or not
you require information
Rated Life L70: Location Rating:
Hours of operation Location Rating Housing
Description: the lamp will provide as defined for
Lamp Model Color:
before reaching LED Lamps by Color of
Description 70% of its original UL 1993 Beam lamp body
lumen output Angle:
Degrees

Color Wattage ENERGY

Bulb Base Order Carton MOL Lumens Temp Replace- Rated Life Dim- STAR® Location Beam Housing Additional
Shape Type Watts Code Description Volts Qty 2
(In) (Initial) CBCP (Initial) CRI ment L70 (Hrs) mable Status Rating3 Angle Color Information^
1

12 Volt AC/DC MR16

GU5.3 6.5 75155 LED6.5DMR16W82715 12 6 1.87 500 4900 2700K 80 50 25,000 Yes Damp 15° White

LED6.5DMR16W82715
Beam Angle (15 = 15 degrees)
Wattage
D = Dimmable CCT (27 = 2700K)
Bulb Shape
CRI (8 = 80)
Body color (W= White)

Directional Lamps (MR16-GU10)

Color Wattage ENERGY
Bulb Base Order Carton MOL Lumens Temp Replace- Rated Life Dim- STAR® Location Beam Housing Additional
Shape Type Watts Code Description Volts Qty 2
(In) (Initial) CBCP (Initial) CRI ment L70 (Hrs) mable Status Rating3 Angle Color Information^
1

12 Volt AC/DC MR16

GU5.3 6.5 75155 LED6.5DMR16W82715 12 6 1.87 500 4900 2700K 80 50 25,000 Yes Damp 15° White
GU5.3 6.5 75153 LED6.5DMR16W83015 12 6 1.87 520 4900 3000K 80 50 25,000 Yes Damp 15° White
GU5.3 6.5 75158 LED6.5DMR16W84015 12 6 1.87 550 5000 4000K 80 50 25,000 Yes Damp 15° White
GU5.3 6.5 93226 LED6.5DMR16W82725 12 6 1.79 500 2350 2700K 80 50 25,000 Yes Damp 25° White
GU5.3 6.5 93222 LED6.5DMR16W83025 12 6 1.79 520 2350 3000K 80 50 25,000 Yes Damp 25° White
GU5.3 6.5 93228 LED6.5DMR16W84025 12 6 1.79 550 2400 4000K 80 50 25,000 Yes Damp 25° White
GU5.3 6.5 93227 LED6.5DMR16W82735 12 6 1.79 500 1350 2700K 80 50 25,000 Yes Damp 35° White
GU5.3 6.5 93097010 LED6.5DMR16B82735 12 6 1.79 500 1350 2700K 80 50 25,000 Yes - Damp 35° Black
GU5.3 6.5 93223 LED6.5DMR16W83035 12 6 1.79 520 1350 3000K 80 50 25,000 Yes Damp 35° White
GU5.3 6.5 93229 LED6.5DMR16W84035 12 6 1.79 550 1400 4000K 80 50 25,000 Yes Damp 35° White
GU5.3 7 21359 LED7MRX16R930/10 12 6 2.01 350 8000 3000K 95 50 25,000 - - Damp 10° White Reveal
Value 12 Volt AC/DC MR16
GU5.3 4.5 34560 LED4.5DMR1682735 12 6 1.78 380 1000 2700K 80 35 25,000 Yes Dry 35° White
GU5.3 4.5 34561 LED4.5DMR1683035 12 6 1.78 400 1000 3000K 80 35 25,000 Yes Dry 35° White
4.5 34563 LED4.5DMR1684035 6 1100 4000K 80 Yes 35° White
LED Lamps - Directional
GU5.3 12 1.78 400 35 25,000 Dry
GU5.3 6.5 34606 LED6.5DMR1682725 12 6 1.78 500 2350 2700K 80 50 25,000 Yes Dry 25° White
GU5.3 6.5 34607 LED6.5DMR1682735 12 6 1.78 500 1350 2700K 80 50 25,000 Yes Dry 35° White
GU5.3 6.5 34611 LED6.5DMR1683025 12 6 1.78 530 2350 3000K 80 50 25,000 Yes Dry 25° White
GU5.3 6.5 34625 LED6.5DMR1683035 12 6 1.78 530 1350 3000K 80 50 25,000 Yes Dry 35° White
120V GU10
GU10 4 93305604 LED4D/GU10W830/35-6PK 120 24 2.1 320 370 3000K 80 35 25,000 Yes  Damp 35° White 6 pack
GU10 5.5 93305605 LED5D/GU10W830/35-6PK 120 24 2.1 500 595 3000K 80 50 25,000 Yes Damp 35° White 6 pack
^
Check dimmer and transformer compatibility at LED.com/dimming
1
The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original lumen output (L70)
2
Minimum order quantity = Carton Qty
ENERGY STAR® status: ENERGY STAR® certified. Lamps without a " " are not ENERGY STAR® certified.
3
UL 1993 Environmental Requirements for LED LAMPS
Damp Location – Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment, including partially protected locations
Dry Location – Location not normally subject to dampness, but may include a location subject to temporary dampness (i.e., building under construction, provided ventilation is adequate to prevent an accumulation of moisture)

www.LED.com/Lamps – 59
 LED Lamps - Directional
LED Lamps – RS Cans

RS Cans make downlight retrofits easy, with a medium base pigtail. Use the existing socket for power and provide
a finished look to the ceiling without having to replace the existing fixture.

Medium (E26) base Selectable SpectraChoice™

pigtail for
easy installation
RS Cans

The new SpectraChoice™

Selectable RS Can Downlights
are the perfect solution to give
an updated look to ceilings
with recessed lighting.

Quick disconnect if Make color temperature

E26 base is not selections easily at any time
needed
with an integrated switch, no
tools required.
LED Lamps - Directional

White trim provides a finished

look to the ceiling

60 – www.LED.com/Lamps
LED Lamps - Directional
Catalog Logic:
Bulb Shape:
Bulb shape
followed by Lumens:
its size (the Watts: Light output (as defined
maximum Energy Used (as by FTC Lamp Label Rules)
diameter defined by FTC
of the bulb Lamp Label Rules) Color Rendering Index (CRI or R):
expressed MOL (in):
Maximum Overall An indication of the ability of the lamp to render
in eighths of object colors in a normal natural way. The higher the ENERGY STAR Status:
an inch). Length in inches
number (0-100), the better the color appearance. ENERGY STAR® status: ENERGY
Order Code: Carton Quantity: STAR® certified. Lamps without a "
Wattage Replacement:
Use the order Number of lamps " are not ENERGY STAR® certified.
Wattage of Traditional Lamp the
code when packed in a carton LED Lamp is meant to replace
Base Type: ordering to
ensure that Volts: Color Temperature (K): Dimmable: Additional Information:
ANSI Base Lamp data is based
you receive the A measure of the visual Indicates whether a lamp Typical application
exact product on operation at rated "warmth" or "coolness" of is dimmable or not and/or other important
you require voltage the light from the lamp. information
The higher the value, the Rated Life L70:
whiter or "cooler" the Hours of operation Location Rating:
Description: light appears. the lamp will provide Location Rating
Lamp Model before reaching as defined for LED
Description 70% of its original Lamps by UL 1993
lumen output

Color Wattage ENERGY

Bulb Base Order Carton MOL Lumens Temp Replace- Rated Life STAR® Location
Shape Type Watts Code Description Volts Qty2 (In) (Initial) (Initial) CRI ment L70 (Hrs)1 Dimmable Status Rating3 Additional Information
RS Cans
E26 8 93162554 LED8DRS4/9SC-4PK 120 16 2.4 700 2700/3000/4000/5000K 90 65 50,000 Yes 4" Can, Pigtail,
Damp Title 24-JA8, 4 pack

LED8DRS6/9SC-4PK
Wattage 4PK = Inner pack of 4 lamps
(Smallest unit of sale downstream)
D = Dimmable
RS = RS Can Trim SC = SpectraChoice™ selectable
color temperature
Diameter (inches) CRI (9 = 90)

Selectable SpectraChoice™ RS Cans

Selectable Wattage ENERGY
Bulb Base Order Carton MOL Lumens Color Replace- Rated Life STAR® Location
Shape Type Watts Code Description Volts Qty2 (In) (Initial) Temperature* CRI ment L70 (Hrs)1 Dimmable Status Rating3 Additional Information
Selectable RS Cans

E26 8 93162554 LED8DRS4/9SC-4PK 120 16 2.4 700 2700/3000/4000/5000K 90 65 50,000 Yes 4" Can, Pigtail,
Damp Title 24-JA8, 4 pack
E26 8 93162555 LED8DRS6/9SC-4PK 120 16 2.8 700 2700/3000/4000/5000K 90 65 50,000 Yes 6" Can, Pigtail,
Damp Title 24-JA8, 4 pack
E26 12 93162556 LED12DRS6/9SC-4PK 120 16 2.8 1100 2700/3000/4000/5000K 90 90 50,000 Yes 6" Can, Pigtail,
Damp Title 24-JA8, 4 pack

RS Cans
Color Wattage ENERGY
Bulb Base Order Carton MOL Lumens Temp Replace- Rated Life STAR® Location
Shape Type Watts Code Description Volts Qty2 (In) (Initial) (Initial) CRI ment L70 (Hrs)1 Dimmable Status Rating3 Additional Information
LED Lamps - Directional
RS Cans
6" Can,
E26 8 19888 LED8DRS6/827 120 12 4.96 700 2700K 80 65 50,000 Yes Damp Pigtail Attachment
6" Can,
E26 8 19908 LED8DRS6/830 120 12 4.96 700 3000K 80 65 50,000 Yes Damp Pigtail Attachment

1
The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original lumen output (L70)
2
Minimum order quantity = Carton Qty
ENERGY STAR® status: ENERGY STAR® certified. Lamps without a " " are not ENERGY STAR® certified.
3
UL 1993 Environmental Requirements for LED LAMPS
Damp Location – Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment, including partially protected locations
* Default color temperature setting is 3000K.

www.LED.com/Lamps – 61
 LED Lamps - Directional
LED Lamps – Reflectors

Current offers LED reflector lamps for all of your recessed can and downlighting application needs in the
restaurant, hospitality and property management sectors.

Plastic lens provides

excellent diffusion

BR40

BR30

Heat sink provides

thermal management

Lamp Drawings (not drawn to scale)

R20
LED Lamps - Directional

R20 BR30 BR40

62 – www.LED.com/Lamps
LED Lamps - Directional
Catalog Logic:

Bulb Shape:
Bulb shape Color Temperature (K):
followed by A measure of the visual "warmth" or ENERGY STAR Status:
Lumens: "coolness" of the light from the lamp. ENERGY STAR® status: ENERGY
its size (the Watts: Light output (as defined The higher the value, the whiter or STAR® certified. Lamps without a " "
maximum Energy Used (as by FTC Lamp Label Rules) "cooler" the light appears. are not ENERGY STAR® certified.
diameter defined by FTC
of the bulb Lamp Label Rules) Color Rendering Index (CRI or R):
expressed MOL (in):
Maximum Overall An indication of the ability of the lamp to render
in eighths of object colors in a normal natural way. The higher the
an inch). Length in inches
CBCP: number (0-100), the better the color appearance.
Order Code: Carton Quantity:
Use the order Center Wattage Replacement:
Number of lamps packed Location Rating:
code when Beam Wattage of Traditional Lamp the
in a carton Location Rating as defined
ordering to Candle LED Lamp is meant to replace
Base Type: ensure that Volts: Power for LED Lamps by UL 1993
ANSI Base Dimmable:
you receive the Lamp data is based Indicates whether a lamp
exact product on operation at rated is dimmable or not
you require voltage
Rated Life L70:
Hours of operation Additional Information:
Description: the lamp will provide Typical application
Lamp Model before reaching and/or other important
Description 70% of its original information
lumen output

Color ENERGY
Bulb Base Order Carton MOL Lumens Temp Wattage Rated Life STAR® Location
Shape Type Watts Code Description Volts Qty2 (In) (Initial) CBCP (Initial) CRI Replacement L70 (Hrs)1 Dimmable Status Rating3 Additional Information
R20
E26 5 45545 LED5DR209CSW 120 6 4.0 450 2700K 92 45 15,000 Yes - Damp Frosted, White body^

LED13DBR40/827
Wattage
D = Dimmable CCT (27 = 2700K)

Bulb Shape
CRI (8 = 80)

Reflector Lamps
Color Wattage ENERGY
Bulb Base Carton MOL Lumens Temp Replace- Rated Life STAR® Location
Shape Type Watts Order Code Description Volts Qty2 (In) (Initial) (Initial) CRI ment L70 (Hrs)1 Dimmable Status Rating3 Additional Information
R20
E26 5.5 93311895 LED5DR20/927 120 6 4.0 500 2700K 90 45 15,000 Yes - Damp Frosted, White body, CEC Title 20
E26 5.5 93311896 LED5DR20/930 120 6 4.0 500 3000K 90 45 15,000 Yes - Damp Frosted, White body, CEC Title 20
E26 5 45545 LED5DR209CSW 120 6 4.0 450 2700K 92 45 15,000 Yes - Damp Frosted, White body^
E26 7 38268 LED7DR20/827 120 6 4.0 525 2700K 80 45 15,000 Yes - Damp Frosted, White body
E26 7 43233 LED7DR20/830 120 6 4.0 525 3000K 80 45 15,000 Yes - Damp Frosted, White body
E26 7 38273 LED7DR20/850 120 6 4.0 525 5000K 80 45 15,000 Yes - Damp Frosted, White body
BR30
E26 8 93305498 LED8DBR30/927-6PK 120 24 5.4 650 2700K 90 65 15,000 Yes Damp White body, 6 pack, CEC Title 20
E26 8 93305499 LED8DBR30/930-6PK 120 24 5.4 650 3000K 90 65 15,000 Yes Damp White body, 6 pack, CEC Title 20
E26 8 93305510 LED8DBR30/940-6PK 120 24 5.4 650 4000K 90 65 15,000 Yes Damp White body, 6 pack, CEC Title 20
E26 8 93305512 LED8DBR30/950-6PK 120 24 5.4 650 5000K 90 65 15,000 Yes Damp White body, 6 pack, CEC Title 20
E26 10 68160 LED10DR303/827W 120 6 5.4 700 2700K 80 65 25,000 Yes Damp Frosted, White body
LED Lamps - Directional
E26 10 68161 LED10DR303/830W 120 6 5.4 700 3000K 80 65 25,000 Yes Damp Frosted, White body
E26 10 69107 LED10DR303/850W 120 6 5.4 700 5000K 80 65 25,000 Yes Damp Frosted, White body
BR40
E26 12 93311897 LED12DBR40/927 120 6 6.4 1050 2700K 90 65 15,000 Yes - Damp Frosted, White body, CEC Title 20
E26 12 93311898 LED12DBR40/930 120 6 6.4 1050 3000K 90 65 15,000 Yes - Damp Frosted, White body, CEC Title 20
E26 12 93311899 LED12DBR40/950 120 6 6.4 1050 5000K 90 65 15,000 Yes - Damp Frosted, White body, CEC Title 20

1
The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original lumen output (L70)
2
Minimum order quantity = Carton Qty
ENERGY STAR® status: ENERGY STAR® certified. Lamps without a " " are not ENERGY STAR® certified.
3
UL 1993 Environmental Requirements for LED LAMPS
Damp Location – Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment, including partially protected locations
^ GE Lighting, a Savant company, lamp, distributed Current Lighting Solutions, LLC.

www.LED.com/Lamps – 63
 LED Lamps - General Purpose
Catalog Logic:

Bulb Shape:
Bulb shape followed by its size (the maximum
diameter of the bulb expressed in eighths of an inch).
Color Temperature (K):
Watts: A measure of the visual "warmth" or Color Rendering Index (CRI or R):
Energy Used (as "coolness" of the light from the lamp. An indication of the ability of the lamp to render
defined by FTC The higher the value, the whiter or object colors in a normal natural way. The higher the
Lamp Label Rules) "cooler" the light appears. number (0-100), the better the color appearance.

Volts: Dimmable:
Order Code: Wattage Replacement: Indicates whether a lamp
Lamp data
Use the order Wattage of Traditional is dimmable or not
is based on
code when Lumens: Lamp the LED Lamp is
operation at
ordering to Light output (as defined meant to replace ENERGY STAR Status:
Base Type: rated voltage
ensure that by FTC Lamp Label Rules) ENERGY STAR® status: ENERGY
ANSI Base Rated Life L70:
you receive the STAR® certified. Lamps without a "
MOL (in): Hours of operation
exact product " are not ENERGY STAR® certified.
Maximum Overall the lamp will provide
you require
Length in inches before reaching Location Rating:
70% of its original Location Rating as defined
Description: Carton Quantity: lumen output for LED Lamps by UL 1993
Lamp Model Number lamps
Description packed in a carton Additional Information:
Typical application and/or
other important information

Color Wattage ENERGY

Bulb Base Order Carton MOL Lumens Temp. Replace- Rated Life Dim- STAR® Location
Shape Type Watts Code Description Volts Qty2 (in) (Initial) (Initial) CRI ment L70 (Hrs) mable Status
1
Rating3 Additional Information
A19
E26 10 93156450 LED10DA19/827/E-4PK 120 24 4.3 800 2700K 80 60 15,000 Yes  Damp, Enclosed White, 4 pack

LED10DA19/827/E-4PK
Wattage 4PK = Inner pack of 4 lamps
(Smallest unit of sale downstream)
D = Dimmable
E = Enclosed rated
Bulb Shape CRI (8 = 80) CCT (27 = 2700K)

Lamp Drawings (not drawn to scale)

LED Lamps - General Purpose

A19
A15 A19 A21 Bright Stik™
GU24

64 – www.LED.com/Lamps
 LED Lamps - General Purpose
LumenChoice / SpectraChoice rev 082222 v1
LED Lamps – SpectraChoice™ A-Line Lamps (Dimmable)

SpectraChoice™ A-line dimmable lamps feature built-in switches to select color temperature. These lamps are
LumenChoice
offered in 40, 60, 75 & 100W incandescent
® equivalent lumen levels. Four lamps can cover the vast®majority of
A-line applications, providing a great opportunity to reduce inventory and simplify BOMs. LumenChoice

SpectraChoice™ SpectraChoice™

LumenChoice ®+ LumenChoice ®+
SpectraChoice™ SpectraChoice™

Selectable SpectraChoice™ A-Line Lamps (Dimmable)

Selectable
Color
Bulb Base Carton Lumens Temp. Wattage Rated Life Location Additional
Shape Type Watts Order Code Description Volts Qty2 MOL (In) (Initial)5 (Initial)* CRI Replacement L70 (Hrs)1 Dimmable Rating3 Information
A-Line SpectraChoice™ Selectable Color Temperature
2700K*
3000K
Damp,
A19 E26 6 93313531 LED6DA19/9SC/E 120 24 4.3 480 3500K 90 40 15,000 Yes White, CEC Title 20
Enclosed
4000K
5000K

LED Lamps - General Purpose

2700K*
3000K
Damp,
A19 E26 10 93313549 LED10DA19/9SC/E 120 24 4.3 800 3500K 90 60 15,000 Yes White, CEC Title 20
Enclosed
4000K
5000K
2700K*
3000K
A19 E26 13 93313543 LED13DA19/9SC 120 24 4.7 1100 3500K 90 75 15,000 Yes Damp White, CEC Title 20
4000K
5000K
2700K*
3000K
A19 E26 15 93313537 LED15DA19/9SC 120 24 4.7 1600 3500K 90 100 15,000 Yes Damp White, CEC Title 20
4000K
5000K

1
The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original lumen output (L70)
2
Minimum order quantity = Carton Qty
3
UL 1993 Environmental Requirements for LED LAMPS
Damp Location – Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment, including partially protected locations
* Default color temperature setting is 2700K

www.LED.com/Lamps – 65
 LED Lamps - General Purpose
A-Line Lamps (Dimmable)
Color Wattage ENERGY
Bulb Base Order Carton MOL Lumens Temp. Replace- Rated Life Dim- STAR® Location
Shape Type Watts Code Description Volts Qty2 (in) (Initial) (Initial) CRI ment L70 (Hrs) mable Status
1
Rating3 Additional Information
A15
A15 E26 3.5 93312022 LED4DFA15-W/927 120 12 3.5 300 2700K 90 40 15,000 Yes - Damp All Glass, White, CEC Title 20
E26 3.5 93142809 LED4DFA15-C-2PK 120 12 3.5 300 2700K 80 40 15,000 Yes - Damp All Glass, Clear, 2 pack
E26 3.5 93142810 LED4DFA15-W-2PK 120 12 3.5 300 2700K 80 40 15,000 Yes - Damp All Glass, White, 2 pack
A19
A19 E26 4.5 37669 LED5DAGCSW-2P 120 120 12 4.4 450 2700K 80 40 15,000 Yes - Damp All Glass, Clear, 2 pack^
E26 6 93156446 LED6DA19/827/E-4PK 120 24 4.3 480 2700K 80 40 15,000 Yes  Damp, Enclosed White, 4 pack
E26 6 93156447 LED6DA19/830/E-4PK 120 24 4.3 480 3000K 80 40 15,000 Yes  Damp, Enclosed White, 4 pack
E26 6 93156448 LED6DA19/840/E-4PK 120 24 4.3 480 4000K 80 40 15,000 Yes  Damp, Enclosed White, 4 pack
E26 6 93156449 LED6DA19/850/E-4PK 120 24 4.3 480 5000K 80 40 15,000 Yes  Damp, Enclosed White, 4 pack
E26 10 93156450 LED10DA19/827/E-4PK 120 24 4.3 800 2700K 80 60 15,000 Yes  Damp, Enclosed White, 4 pack
E26 10 93156531 LED10DA19/830/E-4PK 120 24 4.3 800 3000K 80 60 15,000 Yes  Damp, Enclosed White, 4 pack
E26 10 93156532 LED10DA19/840/E-4PK 120 24 4.3 800 4000K 80 60 15,000 Yes  Damp, Enclosed White, 4 pack
E26 10 93156533 LED10DA19/850/E-4PK 120 24 4.3 800 5000K 80 60 15,000 Yes  Damp, Enclosed White, 4 pack
E26 12 93156534 LED12DA19/827/E-4PK 120 24 4.7 1100 2700K 80 75 15,000 Yes  Damp, Enclosed White, 4 pack
E26 12 93156535 LED12DA19/830/E-4PK 120 24 4.7 1100 3000K 80 75 15,000 Yes  Damp, Enclosed White, 4 pack
E26 12 93156536 LED12DA19/840/E-4PK 120 24 4.7 1100 4000K 80 75 15,000 Yes  Damp, Enclosed White, 4 pack
E26 12 93156537 LED12DA19/850/E-4PK 120 24 4.7 1100 5000K 80 75 15,000 Yes  Damp, Enclosed White, 4 pack
E26 15 93156538 LED15DA19/827-4PK 120 24 4.7 1600 2700K 80 100 15,000 Yes  Damp White, 4 pack
E26 15 93156539 LED15DA19/830-4PK 120 24 4.7 1600 3000K 80 100 15,000 Yes  Damp White, 4 pack
E26 15 93156540 LED15DA19/840-4PK 120 24 4.7 1600 4000K 80 100 15,000 Yes  Damp White, 4 pack
E26 15 93156541 LED15DA19/850-4PK 120 24 4.7 1600 5000K 80 100 15,000 Yes  Damp White, 4 pack

A-Line Lamps 90 CRI (Dimmable)

Color Wattage Rated ENERGY
Bulb Base Order Carton MOL Lumens Temp. Replace- Life Dim- STAR® Location
Shape Type Watts Code Description Volts Qty2 (in) (Initial) (Initial) CRI ment L70 (Hrs) mable Status
1
Rating3 Additional Information
A19
A19 E26 5.5 93305532 LED6DA19/927/E-4PK 120 24 4.3 450 2700K 90 40 15,000 Yes  Damp, Enclosed White, 4 pack, CEC Title 20
E26 5.5 93305533 LED6DA19/950/E-4PK 120 24 4.3 450 5000K 90 40 15,000 Yes  Damp, Enclosed White, 4 pack, CEC Title 20
E26 10 93305534 LED10DA19/927/E-4PK 120 24 4.3 800 2700K 90 60 15,000 Yes  Damp, Enclosed White, 4 pack, CEC Title 20
E26 10 93305535 LED10DA19/950/E-4PK 120 24 4.3 800 5000K 90 60 15,000 Yes  Damp, Enclosed White, 4 pack, CEC Title 20
E26 13 93305536 LED13DA19/927-4PK 120 24 4.7 1100 2700K 90 75 15,000 Yes  Damp White, 4 pack, CEC Title 20
E26 13 93305537 LED13DA19/950-4PK 120 24 4.7 1100 5000K 90 75 15,000 Yes  Damp White, 4 pack, CEC Title 20
E26 15 93305538 LED15DA19/927-4PK 120 24 4.7 1600 2700K 90 100 15,000 Yes  Damp White, 4 pack, CEC Title 20
E26 15 93305539 LED15DA19/950-4PK 120 24 4.7 1600 5000K 90 100 15,000 Yes  Damp White, 4 pack, CEC Title 20

A-Line Lamps (High Output)

Color Wattage ENERGY
Bulb Base Order Carton MOL Lumens Temp. Replace- Rated Life Dim- STAR® Location
Shape Type Watts Code Description Volts Qty2 (in) (Initial) (Initial) CRI ment L70 (Hrs)1 mable Status Rating3 Additional Information
A21
A21 E26 22 93309224 LED22DA21/827 120 4 5.7 2610 2700K 80 150 15,000 Yes - Wet White
E26 22 93309225 LED22DA21/850 120 4 5.7 2610 5000K 80 150 15,000 Yes - Wet White
E26 23 93309226 LED23A21/827 120 4 5.7 3010 2700K 80 200 15,000 No - Wet White
E26 23 93309227 LED23A21/850 120 4 5.7 3010 5000K 80 200 15,000 No - Wet White
LED Lamps - General Purpose

1
The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original lumen output (L70)
2
Minimum order quantity = Carton Qty
ENERGY STAR® status: ENERGY STAR® certified. Lamps without a " " are not ENERGY STAR® certified.
3
UL 1993 Environmental Requirements for LED LAMPS
Damp Location – Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment, including partially protected locations
Wet Location – Location in which water or other liquid can drip, splash, or flow on or against electrical equipment.
When installing outdoors, ensure the socket used is suitably Listed for use in Wet locations and socket gaskets provided by the manufacturer are correctly attached.
^ GE Lighting, a Savant company, lamp, distributed Current Lighting Solutions, LLC.

66 – www.LED.com/Lamps
LED Lamps - General Purpose
A-Line Lamps (GU24)
Color Wattage ENERGY
Bulb Base Order Carton MOL Lumens Temp. Replace- Rated Life Dim- STAR® Location Additional
Shape Type Watts Code Description Volts Qty2 (in) (Initial) (Initial) CRI ment L70 (Hrs) mable Status
1
Rating3 Information
GU24 Base General Purpose A-Line Lamps
A19 GU24 10 93156542 LED10DA19/GU24/827/E-4PK 120 24 4.2 800 2700K 80 40 15,000 Yes - Damp, Enclosed White, 4 pack
A19 GU24 15 93156543 LED15DA19/GU24/827-4PK 120 24 4.4 1600 2700K 80 100 15,000 Yes - Damp White, 4 pack

A-Line Lamps (3-Way)

Color Wattage ENERGY
Bulb Base Order Carton MOL Lumens Temp. Replace- Rated Life Dim- STAR® Additional
Shape Type Watts Code Description Volts Qty2 (in) (Initial) (Initial) CRI ment L70 (Hrs)1 mable Status Location Rating3 Information
3-Way General Purpose A-Line Lamps
A19 E26d 4/9/13 93156602 LED13A19/30/100/827-4PK 120 24 4.7 400/980/1400 2700K 80 30/70/100 15,000 - - Damp White, 4 pack
A21 E26d 5/12/17 93156603 LED17A21/50/150/827-4PK 120 24 5.3 650/1500/2155 2700K 80 50/100/150 15,000 - - Damp White, 4 pack

A-Line Lamps (Value)

Color Wattage ENERGY
Bulb Base Order Carton MOL Lumens Temp. Replace- Rated Life Dim- STAR®
Shape Type Watts Code Description Volts Qty2 (in) (Initial) (Initial) CRI ment L70 (Hrs) mable Status Location Rating3 Additional Information
1

A19
A19 E26 5 93142977 LED5A19/827-4PK 120 24 4.3 450 2700K 80 40 10,000 - - Damp White, 4 pack
A19 E26 5 93142978 LED5A19/830-4PK 120 24 4.3 450 3000K 80 40 10,000 - - Damp White, 4 pack
A19 E26 5 93142979 LED5A19/840-4PK 120 24 4.3 450 4000K 80 40 10,000 - - Damp White, 4 pack
A19 E26 5 93142980 LED5A19/850-4PK 120 24 4.3 450 5000K 80 40 10,000 - - Damp White, 4 pack
A19 E26 9 93142981 LED9A19/827-4PK 120 24 4.3 760 2700K 80 60 10,000 - - Damp White, 4 pack
A19 E26 9 93142982 LED9A19/830-4PK 120 24 4.3 760 3000K 80 60 10,000 - - Damp White, 4 pack
A19 E26 9 93142983 LED9A19/840-4PK 120 24 4.3 760 4000K 80 60 10,000 - - Damp White, 4 pack
A19 E26 9 93142984 LED9A19/850-4PK 120 24 4.3 760 5000K 80 60 10,000 - - Damp White, 4 pack
A21
A21 E26 11 93142985 LED11A21/827-4PK 120 24 5.2 1050 2700K 80 75 10,000 - - Damp White, 4 pack
A21 E26 11 93142986 LED11A21/830-4PK 120 24 5.2 1050 3000K 80 75 10,000 - - Damp White, 4 pack
A21 E26 11 93142987 LED11A21/840-4PK 120 24 5.2 1050 4000K 80 75 10,000 - - Damp White, 4 pack
A21 E26 11 93142988 LED11A21/850-4PK 120 24 5.2 1050 5000K 80 75 10,000 - - Damp White, 4 pack
A21 E26 15 93142989 LED15A21/827-4PK 120 24 5.2 1520 2700K 80 100 10,000 - - Damp White, 4 pack
A21 E26 15 93142990 LED15A21/830-4PK 120 24 5.2 1520 3000K 80 100 10,000 - - Damp White, 4 pack
A21 E26 15 93142991 LED15A21/840-4PK 120 24 5.2 1520 4000K 80 100 10,000 - - Damp White, 4 pack
A21 E26 15 93142992 LED15A21/850-4PK 120 24 5.2 1520 5000K 80 100 10,000 - - Damp White, 4 pack

Bright Stik™
Color Wattage Rated ENERGY
Bulb Base Order Carton MOL Lumens Temp. Replace- Life Dim- STAR®
Shape Type Watts Code Description Volts Qty2 (in) (Initial) (Initial) CRI ment L70 (Hrs) mable Status Location Rating3 Additional Information
1

Bright StikTM

Bright Stik™ E26 5.5 66256 LED5.5LS3/827 120 48 4.45 450 2700K 80 40 15,000 -  Damp 3 pack
Bright Stik™ E26 5.5 75177 LED5.5LS3/850 120 48 4.45 450 5000K 80 40 15,000 -  Damp 3 pack
Bright Stik™ E26 9 75184 LED9LS3/827 120 48 4.45 800 2700K 80 60 15,000 -  Damp 3 pack
Bright Stik™ E26 9 75588 LED9LS3/850 120 48 4.45 800 5000K 80 60 15,000 -  Damp 3 pack
Bright Stik™ E26 12 75590 LED12LS2/827 120 32 5.24 1250 2700K 80 75 15,000 -  Damp 2 pack
Bright Stik™ E26 12 75591 LED12LS2/850 120 32 5.24 1250 5000K 80 75 15,000 -  Damp 2 pack
Bright Stik™ E26 15 75593 LED15LS2/827 120 32 5.24 1700 2700K 80 100 15,000 -  Damp 2 pack
Bright Stik™ E26 15 75644 LED15LS2/850 120 32 5.24 1700 5000K 80 100 15,000 -  Damp 2 pack

LED Lamps - General Purpose

1
The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original lumen output (L70)
2
Minimum order quantity = Carton Qty
ENERGY STAR® status: ENERGY STAR® certified. Lamps without a " " are not ENERGY STAR® certified.
3
UL 1993 Environmental Requirements for LED LAMPS
Damp Location – Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment, including partially protected locations

www.LED.com/Lamps – 67
 LED Lamps - General Purpose
LED Lamps – Decorative

Decorative LED lamps feature LED "filaments" in glass bulbs, mimicking a traditional decorative lamp look.
Various shapes, bases and wattages are available in clear and white finishes.

Bent tip (CA) and

blunt tip (B) shapes

Clear and white

(frosted) finishes

E12 (candelabra) and

E26 (medium) bases
LED Lamps - General Purpose

68 – www.LED.com/Lamps
LED Lamps - General Purpose
Catalog Logic:

Bulb Shape:
Bulb shape Color Rendering Index (CRI or R):
followed by An indication of the ability of the lamp to render object
its size (the colors in a normal natural way. The higher the number
maximum (0-100), the better the color appearance.
diameter
of the bulb Lumens: Rated Life L70:
expressed Watts: Light output (as defined Hours of operation the lamp will provide before
Color Temperature (K):
in eighths of Energy Used (as by FTC Lamp Label Rules) reaching 70% of its original lumen output
Description: A measure of the visual
an inch). defined by FTC
Lamp Model "warmth" or "coolness" of
Lamp Label Rules) MOL (in): the light from the lamp.
Description Dimmable:
Maximum Overall The higher the value, the Indicates whether a lamp
Base Type: Length in inches whiter or "cooler" the is dimmable or not
ANSI Base Order Code: light appears.
Carton Quantity: Location Rating:
Use the order
code when Number of lamps ENERGY STAR Status: Location Rating as defined
packed in a carton Wattage ENERGY STAR status:
® for LED Lamps by UL 1993
ordering to
ensure that Replacement: ENERGY STAR® certified.
you receive the Wattage of Lamps without a " "
Volts: Additional Information:
exact product Traditional Lamp are not ENERGY STAR®
Lamp data is based Typical application and/or
you require the LED Lamp is certified.
on operation at rated other important information
voltage meant to replace

Color Wattage ENERGY

Bulb Base Order Carton MOL Lumens Temp. Replace- Rated Life Dim- STAR® Location
Shape Type Watts Code Description Volts Qty2 (in) (Initial) (Initial) CRI ment L70 (Hrs) mable Status
1
Rating3 Additional Information
Candles
CA E12 3.5 93142795 LED4DFCAC-C-2PK 120 12 4.6 300 2700K 80 40 15,000 Yes  Damp All Glass, Clear, Bent Tip, 2 pack

LED4DFCAC-C-2PK
Wattage 2PK = Inner pack of 2 lamps
(Smallest unit of sale downstream)
D = Dimmable Base (C = Candelabra [E12],
F = Filament M = Medium [E26])
Finish (C = Clear,
Shape (CA = bent tip Candle, B =
W = White)
Blunt tip, G = Globe)

Lamp Drawings (not drawn to scale)

LED Lamps - General Purpose

BC BM CAC CAM G16 G25

www.LED.com/Lamps – 69
 LED Lamps - General Purpose

CAM BM G25

A15-VTG ST19-VTG

CAC BC G16

Decorative Lamps
Color Wattage ENERGY
Bulb Base Order Carton MOL Lumens Temp. Replace- Rated Life Dim- STAR® Location
Shape Type Watts Code Description Volts Qty2 (in) (Initial) (Initial) CRI ment L70 (Hrs) mable Status Rating3 Additional Information
1

Candles
CA/B E26 2.5 93142804 LED3DFCAM-C-2PK 120 12 4.4 200 2700K 80 25 15,000 Yes  Damp All Glass, Clear, Bent Tip, 2 pack
E26 2.5 93142808 LED3DFCAM-W-2PK 120 12 4.4 200 2700K 80 25 15,000 Yes  Damp All Glass, White, Bent Tip, 2 pack
E26 3.5 93142811 LED4DFBM-C-2PK 120 12 3.8 300 2700K 80 40 15,000 Yes  Damp All Glass, Clear, 2 pack
E26 3.5 93142814 LED4DFBM-W-2PK 120 12 3.8 300 2700K 80 40 15,000 Yes  Damp All Glass, White, 2 pack
E26 3.5 93311960 LED4DFCAM-C/927 120 12 4.4 300 2700K 90 40 15,000 Yes - Damp All Glass, Clear, Bent Tip, CEC Title 20
E26 3.5 93142812 LED4DFCAM-C-2PK 120 12 4.4 300 2700K 80 40 15,000 Yes  Damp All Glass, Clear, Bent Tip, 2 pack
E26 3.5 93142815 LED4DFCAM-W-2PK 120 12 4.4 300 2700K 80 40 15,000 Yes  Damp All Glass, White, Bent Tip, 2 pack
E26 5 93142855 LED5DFBM-C-2PK 120 12 3.8 500 2700K 80 60 15,000 Yes  Damp All Glass, Clear, 2 pack
E26 5 93142856 LED5DFBM-W-2PK 120 12 3.8 500 2700K 80 60 15,000 Yes  Damp All Glass, White, 2 pack
E26 5 93142851 LED5DFCAM-C-2PK 120 12 4.4 500 2700K 80 60 15,000 Yes  Damp All Glass, Clear, Bent Tip, 2 pack
E26 5 93142852 LED5DFCAM-W-2PK 120 12 4.4 500 2700K 80 60 15,000 Yes  Damp All Glass, White, Bent Tip, 2 pack
E12 2.5 93142792 LED3DFCAC-C-2PK 120 12 4.6 200 2700K 80 25 15,000 Yes  Damp All Glass, Clear, Bent Tip, 2 pack
E12 2.5 93142793 LED3DFCAC-W-2PK 120 12 4.6 200 2700K 80 25 15,000 Yes  Damp All Glass, White, Bent Tip, 2 pack
E12 3.5 93142794 LED4DFBC-C-2PK 120 12 3.9 300 2700K 80 40 15,000 Yes  Damp All Glass, Clear, 2 pack
E12 3.5 93142796 LED4DFBC-W-2PK 120 12 3.9 300 2700K 80 40 15,000 Yes  Damp All Glass, White, 2 pack
E12 3.5 93312028 LED4DFCAC-C/927 120 12 4.6 300 2700K 90 40 15,000 Yes - Damp All Glass, Clear, Bent Tip, CEC Title 20
E12 3.5 93142795 LED4DFCAC-C-2PK 120 12 4.6 300 2700K 80 40 15,000 Yes  Damp All Glass, Clear, Bent Tip, 2 pack
E12 3.5 93142797 LED4DFCAC-W-2PK 120 12 4.6 300 2700K 80 40 15,000 Yes  Damp All Glass, White, Bent Tip, 2 pack
E12 5 93142802 LED5DFBC-C-2PK 120 12 3.9 500 2700K 80 60 15,000 Yes  Damp All Glass, Clear, 2 pack
E12 5 93142803 LED5DFBC-W-2PK 120 12 3.9 500 2700K 80 60 15,000 Yes  Damp All Glass, White, 2 pack
E12 5 93142800 LED5DFCAC-C-2PK 120 12 4.6 500 2700K 80 60 15,000 Yes  Damp All Glass, Clear, Bent Tip, 2 pack
E12 5 93142801 LED5DFCAC-W-2PK 120 12 4.6 500 2700K 80 60 15,000 Yes  Damp All Glass, White, Bent Tip, 2 pack
Globes
G25 E26 2.8 93142805 LED3DFG25-C-2PK 120 12 4.7 250 2700K 80 25 15,000 Yes  Damp All Glass, Clear, 2 pack
E26 2.8 93142807 LED3DFG25-W-2PK 120 12 4.7 250 2700K 80 25 15,000 Yes  Damp All Glass, White, 2 pack
E26 4 93311963 LED4DFG25-C/927 120 12 4.7 350 2700K 90 40 15,000 Yes - Damp All Glass, Clear, CEC Title 20
E26 4 93311966 LED4DFG25-W/927 120 12 4.7 350 2700K 90 40 15,000 Yes - Damp All Glass, White, CEC Title 20
E26 4 93142847 LED4DFG25-C-2PK 120 12 4.7 350 2700K 80 40 15,000 Yes  Damp All Glass, Clear, 2 pack
E26 4 93142846 LED4DFG25-W-2PK 120 12 4.7 350 2700K 80 40 15,000 Yes  Damp All Glass, White, 2 pack
LED Lamps - General Purpose

E26 5 93142850 LED5DFG25-C-2PK 120 12 4.7 500 2700K 80 60 15,000 Yes  Damp All Glass, Clear, 2 pack
E26 5 93142849 LED5DFG25-W-2PK 120 12 4.7 500 2700K 80 60 15,000 Yes  Damp All Glass, White, 2 pack
G16.5 E12 3.5 28280 LED3DFG16-GW-2T 120 12 3.0 250 2700K 80 25 15,000 Yes - Damp All Glass, White, 2 pack^
E12 4 93142798 LED4DFG16C-C-2PK 120 12 3.4 350 2700K 80 40 15,000 Yes  Damp All Glass, Clear, 2 pack
E12 4 93142799 LED4DFG16C-W-2PK 120 12 3.4 350 2700K 80 40 15,000 Yes  Damp All Glass, White, 2 pack

Vintage Style Decorative Lamps

Color Wattage
Bulb Base Order Carton MOL Lumens Temp. Replace- Rated Life Dim- Location
Shape Type Watts Code Description Volts Qty 2
(in) (Initial) (Initial) CRI ment L70 (Hrs)1 mable Rating3 Additional Information
Vintage
A15 E26 3 93311928 LED3DFA15-C-VTG 120 12 3.5 150 2150K 90 25 15,000 Yes Damp All Glass, Clear Amber, CEC Title 20 Exempt
ST19 E26 5.5 93311890 LED5DFST19-C-VTG 120 12 5.3 400 2150K 90 40 15,000 Yes Damp All Glass, Clear Amber, CEC Title 20 Exempt

1
The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original lumen output (L70)
2
Minimum order quantity = Carton Qty
ENERGY STAR® status: ENERGY STAR® certified. Lamps without a " " are not ENERGY STAR® certified.
3
UL 1993 Environmental Requirements for LED LAMPS
Damp Location – Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment, including partially protected locations
^ GE Lighting, a Savant company, lamp, distributed Current Lighting Solutions, LLC.

70 – www.LED.com/Lamps
LED Lamps - Packaging Notes
LED Lamps - Inner Pack Lamp Quantity

Packaging configurations vary across the wide range of LED Lamps offered by Current. LED Tubes are packaged
in bulk, with no inner pack inside the outer carton. Many lamps, such LED HID, are packaged in individual packs
inside the outer carton. The table below details the materials that are packaged into saleable units of more than
one lamp. These inner pack sizes are noted throughout the catalog in the "Additional Information" column, but the
table below is provided as another reference.

Inner Outer Inner Outer

Lamp Order Pack Carton Lamp Order Pack Carton
Category Code Description Lamp Qty Lamp Qty Category Code Description Lamp Qty Lamp Qty
Plug-in 93300091 LED11G24d-V/8SC-4PK 4 24 A-line 93142977 LED5A19/827-4PK 4 24
Plug-in 93300090 LED11G24d-H/8SC-4PK 4 24 A-line 93142978 LED5A19/830-4PK 4 24
Plug-in 93300089 LED9G24q-V/8SC-4PK 4 24 A-line 93142979 LED5A19/840-4PK 4 24
Plug-in 93300088 LED11BG24-V/8SC/120-347-4PK 4 24 A-line 93142980 LED5A19/850-4PK 4 24
Plug-in 93300087 LED11BG24-H/8SC/120-347-4PK 4 24 A-line 93142981 LED9A19/827-4PK 4 24
Plug-in 93300068 LED8BG24-O/827-4PK 4 24 A-line 93142982 LED9A19/830-4PK 4 24
Plug-in 93300069 LED8BG24-O/830-4PK 4 24 A-line 93142983 LED9A19/840-4PK 4 24
Plug-in 93300080 LED8BG24-O/835-4PK 4 24 A-line 93142984 LED9A19/850-4PK 4 24
Plug-in 93300081 LED8BG24-O/840-4PK 4 24 A-line 93142985 LED11A21/827-4PK 4 24
Plug-in 93300082 LED10BG24-O/827-4PK 4 24 A-line 93142986 LED11A21/830-4PK 4 24
Plug-in 93300083 LED10BG24-O/830-4PK 4 24 A-line 93142987 LED11A21/840-4PK 4 24
Plug-in 93300084 LED10BG24-O/835-4PK 4 24 A-line 93142988 LED11A21/850-4PK 4 24
Plug-in 93300086 LED10BG24-O/840-4PK 4 24 A-line 93142989 LED15A21/827-4PK 4 24
PAR 93305603 LED6DP16W830/35-6PK 6 24 A-line 93142990 LED15A21/830-4PK 4 24
PAR 93153892 LED12DP30VOW830/25-4PK 4 16 A-line 93142991 LED15A21/840-4PK 4 24
PAR 93153891 LED12DP30LVOW830/25-4PK 4 16 A-line 93142992 LED15A21/850-4PK 4 24
PAR 93153880 LED15DP38VOW830/35-4PK 4 16 Bright StikTM 66256 LED5.5LS3/827 3 48
MR16 93305604 LED4D/GU10W830/35-6PK 6 24 Bright StikTM 75177 LED5.5LS3/850 3 48
MR16 93305605 LED5D/GU10W830/35-6PK 6 24 Bright StikTM 75184 LED9LS3/827 3 48
RS Can 93162554 LED8DRS4/9SC-4PK 4 16 Bright StikTM 75588 LED9LS3/850 3 48
RS Can 93162555 LED8DRS6/9SC-4PK 4 16 Bright StikTM 75590 LED12LS2/827 2 32
RS Can 93162556 LED12DRS6/9SC-4PK 4 16 Bright StikTM 75591 LED12LS2/850 2 32
Reflector 93305498 LED8DBR30/927-6PK 6 24 Bright StikTM 75593 LED15LS2/827 2 32
Reflector 93305499 LED8DBR30/930-6PK 6 24 Bright StikTM 75644 LED15LS2/850 2 32
Reflector 93305510 LED8DBR30/940-6PK 6 24 Decorative 93142804 LED3DFCAM-C-2PK 2 12
Reflector 93305512 LED8DBR30/950-6PK 6 24 Decorative 93142808 LED3DFCAM-W-2PK 2 12
A-line 93142809 LED4DFA15-C-2PK 2 12 Decorative 93142811 LED4DFBM-C-2PK 2 12
A-line 93142810 LED4DFA15-W-2PK 2 12 Decorative 93142814 LED4DFBM-W-2PK 2 12
A-line 37669 LED5DAGCSW-2P 120 2 12 Decorative 93142812 LED4DFCAM-C-2PK 2 12
A-line 93156446 LED6DA19/827/E-4PK 4 24 Decorative 93142815 LED4DFCAM-W-2PK 2 12
A-line 93156447 LED6DA19/830/E-4PK 4 24 Decorative 93142855 LED5DFBM-C-2PK 2 12
A-line 93156448 LED6DA19/840/E-4PK 4 24 Decorative 93142856 LED5DFBM-W-2PK 2 12
A-line 93156449 LED6DA19/850/E-4PK 4 24 Decorative 93142851 LED5DFCAM-C-2PK 2 12
A-line 93156450 LED10DA19/827/E-4PK 4 24 Decorative 93142852 LED5DFCAM-W-2PK 2 12
A-line 93156531 LED10DA19/830/E-4PK 4 24 Decorative 93142792 LED3DFCAC-C-2PK 2 12
A-line 93156532 LED10DA19/840/E-4PK 4 24 Decorative 93142793 LED3DFCAC-W-2PK 2 12
A-line 93156533 LED10DA19/850/E-4PK 4 24 Decorative 93142794 LED4DFBC-C-2PK 2 12
A-line 93156534 LED12DA19/827/E-4PK 4 24 Decorative 93142796 LED4DFBC-W-2PK 2 12
A-line 93156535 LED12DA19/830/E-4PK 4 24 Decorative 93142795 LED4DFCAC-C-2PK 2 12
A-line 93156536 LED12DA19/840/E-4PK 4 24 Decorative 93142797 LED4DFCAC-W-2PK 2 12
A-line 93156537 LED12DA19/850/E-4PK 4 24 Decorative 93142802 LED5DFBC-C-2PK 2 12
A-line 93156538 LED15DA19/827-4PK 4 24 Decorative 93142803 LED5DFBC-W-2PK 2 12
A-line 93156539 LED15DA19/830-4PK 4 24 Decorative 93142800 LED5DFCAC-C-2PK 2 12
A-line 93156540 LED15DA19/840-4PK 4 24 Decorative 93142801 LED5DFCAC-W-2PK 2 12
A-line 93156541 LED15DA19/850-4PK 4 24 Decorative 93142805 LED3DFG25-C-2PK 2 12
A-line 93305532 LED6DA19/927/E-4PK 4 24 Decorative 93142807 LED3DFG25-W-2PK 2 12
A-line 93305533 LED6DA19/950/E-4PK 4 24 Decorative 93142847 LED4DFG25-C-2PK 2 12
A-line 93305534 LED10DA19/927/E-4PK 4 24 Decorative 93142846 LED4DFG25-W-2PK 2 12
A-line 93305535 LED10DA19/950/E-4PK 4 24 Decorative 93142850 LED5DFG25-C-2PK 2 12
A-line 93305536 LED13DA19/927-4PK 4 24 Decorative 93142849 LED5DFG25-W-2PK 2 12
A-line 93305537 LED13DA19/950-4PK 4 24 Decorative 28280 LED3DFG16-GW-2T 2 12
A-line 93305538 LED15DA19/927-4PK 4 24 Decorative 93142798 LED4DFG16C-C-2PK 2 12
A-line 93305539 LED15DA19/950-4PK 4 24 Decorative 93142799 LED4DFG16C-W-2PK 2 12
A-line 93156542 LED10DA19/GU24/827/E-4PK 4 24
A-line 93156543 LED15DA19/GU24/827-4PK 4 24
A-line 93156602 LED13A19/30/100/827-4PK 4 24
A-line 93156603 LED17A21/50/150/827-4PK 4 24

www.LED.com/Lamps – 71
TRADITIONAL
LAMPS & BALLASTS
Current carries a full family of Traditional lamps that feature plug-and-play
simplicity. Our engineering leadership over the years in Traditional lighting
has resulted in products that provide the exceptional light quality that you
know and love.
72 – www.LED.com/Lamps
Traditional
Lamps

www.LED.com/Lamps – 73
 Linear Fluorescent Lamps
Linear Fluorescent lighting, first introduced by GE in 1939, continues to offer low operating costs
and long life.

Lamp Drawings (not drawn to scale)

Mod-U-Line®
Mod-U-Line®T8/U6
T8/U6 (1"
(1''diameter) MediumBi-Pin
diameter) Medium Bi-PinBase
Base (G13)
(G13)

T9T9Circline
Circline(1-1/8"
(1-1/8''diameter)
diameter) 4-Pin Base(G10q)
4-Pin Base (G10q)

T5 (5/8" diameter) Miniature Bi-Pin Base (G5)

T5 (5/8'' diameter) Miniature Bi-Pin Base (G5)
Mod-U-Line®
Mod-U-Line®T12/U3
T12/U3 (1
(1 1/2"
1 ⁄ 2''diameter)
diameter)Medium
Medium Bi-Pin Base(G13)
Bi-Pin Base (G13)

T6
T6(3/4"
(3/4''diameter) SinglePin
diameter) Single PinBase
Base (Fa8)
( Fa8)

T8
T8(1"
(1''diameter)
diameter) Single PinBase
Single Pin Base( Fa8)
(Fa8)
Mod-U-Line®
Mod-U-Line®T12/U6
T12/U6(1-1/2" diameter)
(1-1 ⁄ 2'' diameter)Medium
Medium Bi-Pin Base(G13)
Bi-Pin Base (G13)

T8(1''
T8 (1"diameter)
diameter) Medium
Medium Bi-Base
Bi-Pin (G13)
Base (G13) T12 (1-1
T12 (1-1/2"
⁄ 2''Diameter) SinglePin
diameter) Single PinBase
Base (Fa8)
( Fa8)

T8T8(1"(1''
diameter)
diameter)Recessed DoubleContact
Recessed Double Contact Base
Base (R17d)
(R17d)
T12 (1-1
T12 (1-1/2"
⁄ 2''Diameter) MediumBi-Pin
diameter) Medium Bi-PinBase
Base (G13)
(G13)

T10 (11/4" diameter) T12

T12(1-1/2" Diameter)
(1-1 ⁄ 2'' diameter)Recessed DoubleContact
Recessed Double Contact Base
Base (R17d)
(R17d)
T10 (11/4'' diameter)Recessed DoubleContact
Recessed Double Contact Base
Base (R17d)
(R17d)
Linear Fluorescent Lamps

T17
T17(2-1/8" diameter)
(2-1/8'' diameter)Mogul
Mogul Bi-Pin (G20)
Bi-Pin (G20)

Power
Power Groove®
Groove® (2-1/8"
(2-1/8'' diameter)
diameter)
Recessed Double
Recessed DoubleContact
Contact Base (R17d)
Base (R17d)

74 – www.LED.com/Lamps
Linear Fluorescent Lamps
Base Identification (not drawn to scale)

Min BiPin
Miniature Med BiPin
Medium Mog BiPin
Mogul Bi-Pin SinglePin
Single Pin Recessed Double
Recessed Double 4-Pin
4-Pin
G5 G5
Bi-Pin G13G13
Bi-Pin G20
G20 Fa8
Fa8 Contact
Contact G10q
G10q
R17d (Circline)
R17d (Circline)

Catalog Logic:
The following terms and descriptions can help you when checking fluorescent lamp specifications and
when ordering products. Within each product line, lamps are divided into families and listed by bulb, base
and then wattage.

Color Rendering Index (CRI or R):

An indication of the ability of the lamp to render object colors
in a normal natural way. The higher the number (0-100), the
better the color appearance
LED Replacement:
Order Code: Current offers a wide range of
Bulb Shape: Use the order code when ordering LED replacement lamps. The LED
followed by its to ensure that you receive the exact Color Temperature – Kelvins (K): lamp models are provided as
size (the maximum product you require. A measure of the visual "warmth" or "coolness" general guidance. Often, there
diameter of the of the light from the lamp. The higher the value, will be more than one LED Lamp
bulb expressed in Nominal Length (in): the whiter or "cooler" the light appears. that may be used to replace a
eighths of an inch). Lamp length including Traditional lamp. For Traditional
base and/or pins. lamps that operated off a ballast,
Means Lumens: the ballast bypass (UL Type B) LED
Watts: Lamp light output at 40% of rated
Carton Quantity: option is given unless otherwise
Energy used (as defined by lamp life or 8K hours for lamps
Number of lamps noted. The application should be
FTC Lamp Label Rules). To exceeding 20K hours life.
packed in a carton considered when selecting an LED
estimate energy consumption
Initial Lumens: replacement lamp. Sometimes,
(kWh), multiply watts x hours
Lamp light output after the Traditional lamps do not have a
of use and divide by 1000.
Description: initial 100 hours of operation. suitable LED replacement due to
Lamp Model special application considerations,
Description Rated Life (hours): such as very high heat. Contact
Base:
Life (as defined by FTC Current for additional guidance if the
The type of base
Lamp Label Rules) is rated appropriate LED solution is unclear.
life in hours.

Type B LED Replacement

Bulb Nominal Order Carton Rated Life Rated Life Initial Mean Color Order
Shape Base Type Watts Length (in.) Code Description Qty (3hr/Start) (12hr/Start) Lumens Lumens Temp. CRI Code Description
T5 High Efficiency
T5 G5 14 21.6 31590 F14W/T5/830/ECO 40 30,000 36,000 1,350 1,240 3000K 85 93128494 LED9BDT5G2/830HE

F14W/T5/830/ECO
Linear Fluorescent Lamps
Identifies as Identifies TCLP compliance
Fluorescent lamp
Identifies the lamp finish or color
Identifies either the lamp's
wattage or its length in inches Identifies the lamp shape
and the bulb diameter in
eighths of an inch

Lamp Contains Mercury.

Manage in Accord with Disposal Laws.
See www.lamprecycle.org or 1-800-327-0097

www.LED.com/Lamps – 75
 Linear Fluorescent Lamps
**Fluorescent Phase-Out Regulations**: Several US states have enacted legislation that prohibit/will prohibit the sale
of Linear and Compact Fluorescent Lamps within their state. For more information including effective dates, please
visit www.LED.com/lamplegislation

T5 Starcoat Ecolux ® Lamps Type B LED Replacement

Bulb Nominal Order Carton Rated Life Rated Life Initial Mean Color Order
Shape Base Type Watts Length (in.) Code Description Qty1 (3hr/Start) (12hr/Start) Lumens Lumens Temp. CRI Notes Code Description
T5 High Efficiency
T5 G5 14 21.6 31590 F14W/T5/830/ECO 40 30,000 36,000 1,350 1,240 3000K 85 93128494 LED9BDT5G2/830HE
G5 14 21.6 46671 F14W/T5/835/ECO 40 30,000 36,000 1,350 1,240 3500K 85 93128495 LED9BDT5G2/835HE
G5 14 21.6 46673 F14W/T5/841/ECO 40 30,000 36,000 1,350 1,240 4100K 85 93128570 LED9BDT5G2/840HE
G5 21 33.4 46677 F21W/T5/830/ECO 40 30,000 36,000 2,100 1,930 3000K 85 93128488 LED11BDT5G3830HE
G5 21 33.4 46684 F21W/T5/835/ECO 40 30,000 36,000 2,100 1,930 3500K 85 93128490 LED11BDT5G3835HE
G5 21 33.4 46687 F21W/T5/841/ECO 40 30,000 36,000 2,100 1,930 4100K 85 93128491 LED11BDT5G3840HE
G5 28 45.2 46704 F28W/T5/830/ECO 40 30,000 36,000 2,900 2,660 3000K 85 93128354 LED14BDT5G4830HE
G5 28 45.2 46705 F28W/T5/835/ECO 40 30,000 36,000 2,900 2,660 3500K 85 93128355 LED14BDT5G4835HE
G5 28 45.2 46706 F28W/T5/841/ECO 40 30,000 36,000 2,900 2,660 4100K 85 93128486 LED14BDT5G4840HE
T5 High Output
T5 G5 24 21.6 46699 F24W/T5/830/ECO 40 30,000 36,000 2,000 1,840 3000K 85 93113793 LED11BDT5/G2/830
G5 24 21.6 46700 F24W/T5/835/ECO 40 30,000 36,000 2,000 1,840 3500K 85 93114322 LED11BDT5/G2/835
G5 24 21.6 46701 F24W/T5/841/ECO 40 30,000 36,000 2,000 1,840 4100K 85 93114323 LED11BDT5/G2/840
G5 39 33.4 46744 F39W/T5/830/ECO 40 30,000 36,000 3,500 3,220 3000K 85 93114325 LED17BDT5/G3/830
G5 39 33.4 46745 F39W/T5/835/ECO 40 30,000 36,000 3,500 3,220 3500K 85 93114626 LED17BDT5/G3/835
G5 54 45.2 46759 F54W/T5/830/ECO 40 30,000 36,000 5,000 4,600 3000K 85 93100292 LED25BDT5/G4/830
G5 54 45.2 46760 F54W/T5/835/ECO 40 30,000 36,000 5,000 4,600 3500K 85 93100293 LED25BDT5/G4/835
G5 54 45.2 46761 F54W/T5/841/ECO 40 30,000 36,000 5,000 4,600 4100K 85 93100294 LED25BDT5/G4/840
G5 54 45.2 46762 F54W/T5/850/ECO 40 30,000 36,000 4,800 4,410 5000K 85 93100295 LED25BDT5/G4/850
G5 54 45.2 46763 F54W/T5/865/ECO 40 30,000 36,000 4,750 4,370 6500K 85 93100295 LED25BDT5/G4/850

T5 Preheat Lamps Type B LED Replacement

Bulb Nominal Order Carton Rated Life Color Order

Shape Base Type Watts Length (in.) Code Description Qty1 (3hr/Start) Initial Lumens Mean Lumens Temp. CRI Notes Code Description
12" and 21" Short T5
T5 G5 8 12.0 10059 F8T5/CW 24 5,000 400 320 4100K 60
G5 13 21.0 10086 F13T5/CW 24 5,000 850 705 4100K 60

T8 Starcoat ® Lamps Type B LED Replacement

Bulb Nominal Order Carton Rated Life Rated Life Initial Mean Color Order
Shape Base Type Watts Length (in.) Code Description Qty1 (3hr/Start) (12hr/Start) Lumens Lumens Temp. CRI Notes Code Description
2' T8 Ecolux®
T8 G13 17 24.0 45741 F17T8/SP30/ECO 24 30,000 36,000 1,325 1,260 3000K 78 39558 LED9BDT8/G2/830
G13 17 24.0 45743 F17T8/SP35/ECO 24 30,000 36,000 1,325 1,260 3500K 78 39560 LED9BDT8/G2/835
G13 17 24.0 45748 F17T8/SP41/ECO 24 30,000 36,000 1,325 1,260 4100K 78 39561 LED9BDT8/G2/840
3' T8 Ecolux®
T8 G13 25 36.0 45754 F25T8/SP35/ECO 24 30,000 36,000 2,080 1,970 3500K 78 39547 LED12BDT8/G3/835
G13 25 36.0 45756 F25T8/SP41/ECO 24 30,000 36,000 2,080 1,970 4100K 78 39554 LED12BDT8/G3/840
4' T8 Ecolux®
T8 G13 32 48.0 68850 F32T8/SPX30/ECO2 36 30,000 36,000 2,925 2,770 3000K 85 △ 39493 LED14BDT8/G4/830
G13 32 48.0 68851 F32T8/SPX35/ECO2 36 30,000 36,000 2,925 2,770 3500K 85 △ 39494 LED14BDT8/G4/835
G13 32 48.0 68852 F32T8/SPX41/ECO2 36 30,000 36,000 2,925 2,770 4100K 85 △ 39498 LED14BDT8/G4/840
G13 32 48.0 68853 F32T8/SPX50/ECO2 36 30,000 36,000 2,900 2,755 5000K 82 △ 39519 LED14BDT8/G4/850
G13 32 48.0 66342 F32T8/SPX65/ECO2 36 30,000 36,000 2,900 2,755 6500K 78 △ 39519 LED14BDT8/G4/850
Linear Fluorescent Lamps

1
Minimum order quantity = Carton Qty
△ Impacted by 4' fluorescent state legislation, SKU not for sale in Vermont after 1/1/2024 due to state legislation; for more information please visit www.LED.com/lamplegislation

76 – www.LED.com/Lamps
Linear Fluorescent Lamps
**Fluorescent Phase-Out Regulations**: Several US states have enacted legislation that prohibit/will prohibit the sale
of Linear and Compact Fluorescent Lamps within their state. For more information including effective dates, please
visit www.LED.com/lamplegislation

Ultra Energy Saving T8 Lamps Type B LED Replacement

Nominal
Bulb Length Order Carton Rated Life Rated Life Initial Mean Color Order
Shape Base Type Watts (in.) Code Description Qty1 (3hr/Start) (12hr/Start) Lumens Lumens Temp. CRI Notes Code Description
4' T8 Ecolux® 25 Watt Lamp
T8 G13 25 48.0 72129 F32T8/25W/SPX35/ECO 36 50,000 55,000 2,500 2,350 3500K 85 △ 93117213 LED11BDT8/G4/835
G13 25 48.0 72130 F32T8/25W/SPX41/ECO 36 50,000 55,000 2,500 2,350 4100K 85 △ 93117214 LED11BDT8/G4/840
G13 25 48.0 72131 F32T8/25W/SPX50/ECO 36 50,000 55000 2500 2350 5000K 80 △ 93117215 LED11BDT8/G4/850
4' T8 Ecolux® 28 Watt Lamp
T8 G13 28 48.0 72864 F28T8/XL/SPX35/ECO 36 45,000 50,000 2,675 2,515 3500K 85 △ 93117213 LED11BDT8/G4/835
G13 28 48.0 72866 F28T8/XL/SPX41/ECO 36 45,000 50,000 2,675 2,515 4100K 82 △ 93117214 LED11BDT8/G4/840
G13 28 48.0 72867 F28T8/XL/SPX50/ECO 36 45,000 50,000 2,675 2,515 5000K 80 △ 93117215 LED11BDT8/G4/850
4' T8 Ecolux® High Lumen
T8 G13 32 48.0 10326 F32T8/XL/SPX35/HL/ECO 36 40,000 45,000 3,100 2,915 3500K 85 △ 39494 LED14BDT8/G4/835
G13 32 48.0 10322 F32T8/XL/SPX41/HL/ECO 36 40,000 45,000 3,100 2,915 4100K 82 △ 39498 LED14BDT8/G4/840
G13 32 48.0 42556 F32T8/XL/SPX50/HL/ECO 36 40,000 45,000 3,000 2,820 5000K 80 △ 39519 LED14BDT8/G4/850

8' T8 Lamps Type B LED Replacement

Nominal
Bulb Length Order Carton Rated Life Rated Life Initial Mean Color Order
Shape Base Type Watts (in.) Code Description Qty1 (3hr/Start) (12hr/Start) Lumens Lumens Temp. CRI Notes Code Description
8' T8 XL Extra-Life
T8 Fa8 59 96.0 68869 F96T8/XL/SPX35/2 24 24,000 30,000 5,950 5,650 3500K 85 93122171 LED34BDT8/G/8/835
Fa8 59 96.0 68870 F96T8/XL/SPX41/2 24 24,000 30,000 5,400 4,860 4100K 85 93122172 LED34BDT8/G/8/840
Fa8 59 96.0 68871 F96T8/XL/SPX50/2 24 24,000 30,000 5,950 5,650 5000K 82 93122174 LED34BDT8/G/8/850
8' T8 XL Extra-Life Watt-Miser® Plus Energy Saving Lamps
T8 Fa8 54 96.0 15123 F96T8/XLSPX41WMP 24 24,000 30,000 5,400 5,000 4100K 84 93122172 LED34BDT8/G/8/840

8' T8 High Output Lamps Type B LED Replacement

Nominal
Bulb Length Order Carton Rated Life Initial Mean Color Order
Shape Base Type Watts (in.) Code Description Qty1 (3hr/Start) Lumens Lumens Temp. CRI Notes Code Description
8' T8 High Output – Recessed Double Contact
T8 R17D 86 96.0 12533 F96T8/SPX35/HO 24 18,000 8,200 7,800 3500K 85 93132591 LED43BDT8/G8/835
R17D 86 96.0 12534 F96T8/SPX41/HO 24 18,000 8,200 7,800 4100K 85 93132592 LED43BDT8/G8/840
R17D 86 96.0 12535 F96T8/SPX50/HO 24 18,000 8,200 7,800 5000K 82 93132593 LED43BDT8/G8/850

T8 Mod-U-Line® Lamps Type B LED Replacement

Nominal
Bulb Length Order Carton Rated Life Initial Mean Color Order
Shape Base Type Watts (in.) Code Description Qty1 (3hr/Start) Lumens Lumens Temp. CRI Notes Code Description
T8 1-5/8" Spacing Ecolux®
T8 G13 31 22.5 72118 F31T8/SPX35/U/ECO 15 24,000 2,775 2,440 3500K 82 93107352 LED13BDT8/U/835
G13 31 22.5 72119 F31T8/SPX41/U/ECO 15 24,000 2,775 2,440 4100K 82 93107388 LED13BDT8/U/840
T8 6" Spacing Ecolux®
T8 G13 32 22.5 28145 F32T8/SP30/U6/ECO 12 20,000 2,700 2,375 3000K 78 93133049 LED13BDT8/U6/830
G13 32 22.5 28149 F32T8/SP35/U6/ECO 12 20,000 2,700 2,375 3500K 78 93133050 LED13BDT8/U6/835
G13 32 22.5 28152 F32T8/SP41/U6/ECO 12 20,000 2,700 2,375 4100K 78 93133051 LED13BDT8/U6/840
G13 32 22.5 72112 F32T8/SPX35/U6/ECO 12 20,000 2,800 2,465 3500K 82 93133050 LED13BDT8/U6/835
G13 32 22.5 72113 F32T8/SPX41/U6/ECO 12 20,000 2,800 2,465 4100K 82 93133051 LED13BDT8/U6/840

Special Application Lamps Type B LED Replacement

Rated Rated
Nominal Life Life Linear Fluorescent Lamps
Bulb Length Order Carton (3hr/ (12hr/ Initial Mean Color Additional Order
Shape Base Type Watts (in.) Code Description Qty1 Start) Start) Lumens Lumens Temp. CRI Information Code Description
covRguard Shatter Resistant
®

(T5 High Efficiency)

T5 G5 28 45.2 81547 F28W/T5/835/ECO/CVG 40 30,000 36,000 2,813 2,672 3500K 85 Blocks UV
(T5 High Output)
T5 G5 54 45.2 48458 F54T5/841/HO/ECO/CVG 40 30,000 36,000 4,850 4,560 4100K 85 93155904 LED25BDT5/G4/840/CVG
G5 54 45.2 80311 F54T5/850/HO/ECO/CVG 40 30,000 36,000 4,650 4,370 5000K 85 93155905 LED25BDT5/G4/850/CVG
T8 Ecolux® w/ Starcoat®
(4' T8 (48") Ecolux® w/Starcoat®)
T8 G13 32 48.0 41126 F32T8SPX35ECOCVG 36 30,000 36,000 2,860 2,715 3500K 85 Blocks UV, △ 93154588 LED16BDT8/G4/835XL/CVG
G13 32 48.0 41127 F32T8SPX41ECOCVG 36 30,000 36,000 2,860 2,715 4100K 85 Blocks UV, △ 93154589 LED16BDT8/G4/840XL/CVG
G13 32 48.0 15971 F32T8SPX50ECOCVG 36 30,000 36,000 2,715 2,580 5000K 82 Blocks UV, △ 93154586 LED16BDT8/G4/850XL/CVG
1
Minimum order quantity = Carton Qty
△ Impacted by 4' fluorescent state legislation, SKU not for sale in Vermont after 1/1/2024 due to state legislation; for more information please visit www.LED.com/lamplegislation

www.LED.com/Lamps – 77
 Linear Fluorescent Lamps
**Fluorescent Phase-Out Regulations**: Several US states have enacted legislation that prohibit/will prohibit the sale
of Linear and Compact Fluorescent Lamps within their state. For more information including effective dates, please
visit www.LED.com/lamplegislation

T12 Lamps Type B LED Replacement

Bulb Nominal Order Carton Rated Life Initial Mean Color Order
Shape Base Type Watts Length (in.) Code Description Qty1 (3hr/Start) Lumens Lumens Temp. CRI Notes Code Description
2' T12 - Preheat (TCLP Compliant)
T12 G13 20 24.0 80045 F20T12/CW/ECO 24 9,000 1,200 1,150 4100K 60 39561 LED9BDT8/G2/840
4' T12 – Rapid Start (TCLP Compliant)
(34W Watt-Miser® Ecolux®)
T12 G13 34 48.0 66474 F34CX41/WM/ECO 30 20,000 2,500 2,200 4100K 87 △ 93117214 LED11BDT8/G4/840
(40W Ecolux®)
T12 G13 40 48.0 80096 F40C50/ECO 30 20,000 2,250 1,870 5000K 90 △ 93117215 LED11BDT8/G4/850
G13 40 48.0 80097 F40DX/ECO 30 20,000 2,050 1,740 6500K 90 △ 93117215 LED11BDT8/G4/850
8' T12 Instant Start
(8' Instant Start Standard)
T12 Fa8 75 96.0 14652 F96T12/DX 15 12,000 4,300 3,870 6500K 90 93122174 LED34BDT8/G/8/850
(8" Instant Start Watt-Miser® XL Extra-life)
T12 Fa8 60 96.0 68052 F96T12/CW/C/WM 15 12,000 3,600 2,900 4100K 90 93122172 LED34BDT8/G/8/840
Fa8 60 96.0 66858 F96T12XL/HL41/WM 15 12,000 5,900 5,480 4100K 80 93122172 LED34BDT8/G/8/840
T12 High Output (800mA) Rapid Start Recessed Double Contact
(4' High Output)
T12 R17D 60 48.0 10773 F48T12/CW/HO 24 12,000 3,825 3,320 4100K 60 △
R17D 60 48.0 10778 F48T12/D/HO 24 12,000 3,400 2,960 6500K 75 △
(5' High Output)
T12 R17D 75 60.0 23075 F60T12/CW/HO 15PK 15 12,000 5,150 4,480 4100K 60
R17D 75 60.0 23077 F60T12/D/HO 15PK 15 12,000 4,400 3,830 6500K 75
(6' High Output)
T12 R17D 85 72.0 13697 F72T12/CW/HO 15PK 15 12,000 6,350 5,520 4100K 60
R17D 85 72.0 13699 F72T12/D/HO 15PK 15 12,000 5,350 4,650 6500K 75
(7' High Output)
T12 R17D 100 84.0 13766 F84T12/CW/HO 15PK 15 12,000 7,700 6,700 4100K 60
R17D 100 84.0 13767 F84T12/D/HO 15PK 15 12,000 6,500 5,660 6500K 75
(8' High Output)
T12 R17D 95 96.0 66862 F96T12/HL41/HO/WM 15 12,000 8,850 7,920 4100K 77 93132592 LED43BDT8/G8/840
G13 20 24.0 80047 F20T12/D/ECO 24 9,000 1,025 945 6500K 75 39563 LED9BDT8/G2/850

Cold Temperature Lamps Type B LED Replacement

Rated Rated
Nominal Life Life
Bulb Length Order Carton (3hr/ (12hr/ Initial Mean Color Order
Shape Base Type Watts (in.) Code Description Qty1 Start) Start) Lumens Lumens Temp CRI Notes Code Description
High Output (800mA) Recessed Double Contact
T12 R17D 110 96.0 11918 F96T12/CW/HO/CT 15 12,000 8,900 7,740 4100K 60 93132592 LED43BDT8/G8/840
R17D 110 96.0 11919 F96T12/D/HO/CT 15 12,000 7,600 6,610 6500K 75 93132593 LED43BDT8/G8/850

T9 Circline® Lamps Type B LED Replacement

Nominal
Bulb Length Order Carton Rated Life Initial Mean Color Order
Shape Base Type Watts (in.) Code Description Qty1 (3hr/Start) Lumens Lumens Temp. CRI Notes Code Description
T9 Circline® Lamps
Linear Fluorescent Lamps

T9 G10q 22 8.25 33774 FC8T9/CW 12 12,000 1,100 825 4100K 60

G10q 32 12.0 33890 FC12T9/CW 12 12,000 1,950 1,460 4100K 60

1
Minimum order quantity = Carton Qty
△ Impacted by 4' fluorescent state legislation, SKU not for sale in Vermont after 1/1/2024 due to state legislation; for more information please visit www.LED.com/lamplegislation

78 – www.LED.com/Lamps
Linear Fluorescent Lamps
Regulation Readiness: Fluorescent Phase-Out

In an effort to regulate consumer products that contain mercury, state governments within the
USA have passed legislation that will prohibit the sale and distribution of Linear and Compact
Fluorescent lamps. The effective date of each state regulation is shown in the table below. This
table will continue to evolve as new legislation is passed.

Regulation Effective Date by Product Category

Product Category
Screw or
4-Foot All Bayonet Based Pin Based
Linear Linear Compact Compact
State Fluorescent Fluorescent Fluorescent Fluorescent
Vermont 1/1/2024
California 1/1/2025 1/1/2024 1/1/2025
Colorado 1/1/2025 1/1/2024 1/1/2025
Oregon 1/1/2025 1/1/2024 1/1/2025
Rhode Island 1/1/2025 1/1/2024 1/1/2025
Hawaii 1/1/2026 1/1/2025 1/1/2026
Maine 1/1/2026 1/1/2026 1/1/2026

Mercury in Fluorescent Lighting

Fluorescent technology was developed by General Electric in 1934. While the amount of mercury
in each fluorescent lamp has significantly decreased over the past 90 years, a small amount is
still required to produce light in all Discharge lamps. When electricity is applied to a fluorescent
tube, mercury ions emit energy in the form of ultraviolet (UV) light. UV light is then converted into
visible light by interacting with the phosphor coating on the inside of the glass tube. Mercury
has electrical characteristics that cannot be matched by other materials and remains a key
component of fluorescent lighting.

Transitioning to LED Lighting

LED (Light Emitting Diode) lamps do not contain mercury, and Current offers a variety of LED
lamp options to replace Linear & Compact Fluorescent lamps. The different Types of LED lamps
are explained in the following pages. Suggested LED replacements are noted for fluorescent
lamps in the tables in this document. These are basic recommendations, but suitability should be
Linear Fluorescent Lamps
evaluated for each specific application where fluorescent lamps were used. For more information
about the transition from fluorescent to LED, contact your Current sales representative.

To learn more about Fluorescent Regulations and LED

replacements, please visit www.LED.com/lamplegislation

www.LED.com/Lamps – 79
 High Intensity Discharge Lamps
High Intensity Discharge lighting provides energy efficiency in a compact size for many commercial
and industrial applications.

Reference Guide | Bulb Identification

DIA.

DIA: Diameter of bulb at widest point.

DIA.
MOL: Maximum Overall Length including base or pins.
MOL LCL: Distance between the center of the arc tube and
the Light Center Length reference plane.
Note: Lamp drawings are not drawn to scale.
LCL
MOL
Be sure to check size and dimension information when identifying
each lamp.

To convert inches to millimeters, multiply the dimension

(in inches) by 25.4 (i.e. 1.5" x 25.4 = 38.1 mm).

Filament Identification

BD17
BD17 BT37
BT37 ED17
ED17 ED23.5
ED23.5 ED28
ED28 ED37
ED37 ED37
ED37 ED28
ED28 ED37
ED37
Med
Med Mog
Mog Med
Med Mog
Mog Mog
Mog Mog
Mog EX39
EX39 Mog
Mog Mog
Mog

Base Identification (not drawn to scale)

High Intensity Discharge Lamps

T4
T4 T4.5
T4.5
MR16
MR16 ED17
ED17 GU6.5 G12
GU6.5 G12
GX10
GX10 Med
Med

PAR20
PAR20 PAR30L
PAR30L PAR38
PAR38 BD17
BD17 ED37
ED37 ED28
ED28 T6
T6 T4.5
T4.5 T6, T7
T6, T7
Med
Med Med
Med Med
Med Med
Med EX39
EX39 EX39
EX39 G12
G12 BiPinG8.5
BiPin G8.5 Rx7s
Rx7s
T15
T15 ED18
ED18
PAR
PAR Elliptical
Elliptical Single-Ended
Single-Ended Double-EndedTD
Double-Ended TD Mog Mog
Mog Mog

80 – www.LED.com/Lamps
High Intensity Discharge Lamps
Lamp Drawings (not drawn to scale)

BD17
BD17 BT37
BT37 BT56
BT56 ED28
ED28 ED37
ED37
Med
Med Mog
Mog Mog
Mog Mog
Mog Mog
Mog

BT28
BT28 BT37
BT37 BT56
BT56 ED28
ED28 ED37
ED37 ED37
ED37
Mog
Mog Mog
Mog Mog
Mog PosMog
Pos Mog Mog
Mog Mog
Mog

High Intensity Discharge Lamps

T9
T9
#10Spade
#10 Spade

BT56
BT56 BT56
BT56 T7
T7 BT56
BT56 ED17
ED17 ED28
ED28 ED37
ED37
Pos
PosMog
Mog Mog
Mog Rx7s
Rx7s Mog
Mog Med
Med EX39
EX39 EX39
EX39

www.LED.com/Lamps – 81
 High Intensity Discharge Lamps
Lamp Drawings (Conti.) (not drawn to scale)

ED18
BD18 ED23 .5
ED23.5 ED18
ED18 ED23 .5
ED23.5
Mog
Mog Mog
Mog Mog
Mog Mog
Mog

T7
Rx7s

B17 ED18
BD18 ED23 .5
BD23.5 E25
E25 ED28
ED28 ED37
ED37 T15
T15 ED23 .5
ED23.5 ED28
ED28 ED37
ED37
Med
Med Mog
Mog Mog
Mog Mog
Mog Mog
Mog Mog
Mog Mog
Mog Mog
Mog Mog
Mog Mog
Mog
High Intensity Discharge Lamps

82 – www.LED.com/Lamps
 High Intensity Discharge Lamps
Base Identification (not drawn to scale)

Recessed BiPin GU6.5 GX10

Single Contact G8.5
R7s
Recessed
Recessed
Single
Single Contact
BiPin
Bi-Pin
G8.5
Contact G8.5
GU6.5
GU6.5 GX10
GX10
R7s
R7s

Med Screw Mog

Medium Screw
Mogul EX39
EX39 Position-
Position- Export
Export BiPin
Bi-Pin BiPin
Bi-Pin MogulBi-Post
Mogul BiPost
E26E26 Screw
Screw E39 E39 Oriented
Oriented Mogul E40
E40 GY9.5
GY9.5 G12
GY12 G38
G38
Med Screw Mog Screw EX39
Mogul
Position- Export BiPin BiPin Mogul BiPost
E26 E39 Oriented Mogul E40
Color Rendering Index (CRI or R):
GY9.5 G12 G38
An indication of the ability of the lamp to render Warning Notice:
Warning and Caution notices for High
Catalog Logic: object colors in a normal natural way. The higher the
number (0-100), the better the color appearance Intensity Discharge lamps. See pages
76 – 81
Color Temperature – Kelvins (K):
A measure of the visual "warmth" or "coolness" of the light from the
lamp. The higher the value, the whiter or "cooler" the light appears. LED Replacement:
Bulb Shape: Means Lumens: Current offers a wide range of
followed by its size (the Watts: Lamp light output at 40% of rated lamp life or LED replacement lamps. The LED
Energy used (as defined by Description: 8K hours for lamps exceeding 20K hours life. lamp models are provided as
maximum diameter of
FTC Lamp Label Rules). To Lamp Model Description general guidance. Often, there
the bulb expressed in Rated Life (hours):
eighths of an inch). estimate energy consumption will be more than one LED Lamp
(kWh), multiply watts x hours Life (as defined by FTC Lamp Label that may be used to replace a
of use and divide by 1000. Rules) is rated life in hours. Traditional lamp. For Traditional
CBCP (Center beam Candlepower: lamps that operated off a ballast,
LET (Lamp LCL (in):
For reflector-type lamps, Center the ballast bypass (UL Type B) LED
Enclosure Type): Distance between the center
Beam Candlepower is the intensity option is given unless otherwise
Describes fixture of the filament and the Light
(candelas) at the center of noted. The application should be
requirements for Center Length reference plane,
maximum intensity of the beam. Initial Lumens: considered when selecting an LED
this lamp in inches.
Used only for ConstantColor® CMH® Lamp light replacement lamp. Sometimes,
Metal Halide Lamps output after the Traditional lamps do not have a
MOL (in): Order Code:
initial 100 hours suitable LED replacement due to
OP Maximum Use the order code Carton Quantity:
of operation. special application considerations,
Base: (Operating Overall when ordering to Number of lamps
such as very high heat. Contact
Position) Length in ensure that you packed in a carton
The type Current for additional guidance if the
inches receive the exact ANSI Ballast Type:
of base appropriate LED solution is unclear.
product you require. Ballast type used to
operate lamp
Type B LED Replacement
Car- Rated
Bulb Base MOL LCL Order ANSI Ballast ton Life Initial Mean Color Warning Order
Shape Type LET OP Watts (In) (In) Code Description Type Qty CBCP (hrs*) Lumens Lumens Temp. CRI Notice Code Description
CMH® MR16/MR17
GX10 O U 20 2.28 85101 CMH20MR16/830/SP C156/M156 12 9,000 12,000 1,000 3000K 81 5

CMH20MR16/830/SP
Identifies as Additional Information

High Intensity Discharge Lamps

CMH® lamp.
Color temp. and CRI
Identifies the
lamp's wattage Identifies the bulb shape

Lamp Contains Mercury.

Manage in Accord with Disposal Laws.
See www.lamprecycle.org or 1-800-327-0097

www.LED.com/Lamps – 83
 High Intensity Discharge Lamps
Multi-Vapor ® Metal Halide Lamps Type B LED Replacement
Car- Rated
Bulb Base MOL LCL Order ANSI Ballast ton Life Initial Mean Color Warning Order
Shape Type LET OP Watts (In) (In) Code Description Type Qty1 (hrs*) Lumens Lumens Temp. CRI Notice Code Description
50 Watts - Enclosed Rated
BD17 E26 E U 50 5.43 3.43 10361 MXR50/U/MED M110 6 10,000 3,200 2,100 3700K 60 1, 3 27729 LED21ED17/740
70 Watts - Enclosed Rated
BD17 E26 E U 70 5.43 3.43 22158 MXR70/U/MED M98 6 12,000 5,500 3,500 3500K 55 1, 3 27729 LED21ED17/740
BD17 E26 E U 70 5.43 3.43 12590 MVR70/U/MED M98 6 12000 5,500 3,000 4000K 65 1, 3 27729 LED21ED17/740
70 Watts - Open Rated
ED17 E26 O U 70 5.43 3.43 12377 MXR70/U/MED/O M98 6 15,000 5,500 3,500 3200K 70 3, 4 93303384 LED/LC/ED17/7SC
100 Watts - Enclosed Rated
BD17 E26 E U 100 5.43 3.43 18680 MXR100/U/MED M90 6 15,000 9,000 6,200 3200K 65 1, 3 93112114 LED35ED17/730
BD17 E26 E U 100 5.43 3.43 12652 MVR100/U/MED M90 6 15,000 9,500 5,800 4000K 70 1, 3 27602 LED35ED17/740
100 Watts - Open Rated
ED17 E26 O U 100 5.43 3.43 12381 MXR100/U/MED/O M90 6 15,000 9,000 6,200 3200K 70 3, 4 93112114 LED35ED17/730
150 Watts - Enclosed Rated
BD17 E26 E U 150 5.43 3.43 12598 MVR150/U/MED M102 6 15,000 14,000 10,500 4300K 65 1, 3 93303384 LED/LC/ED17/7SC
150 Watts - Open Rated
ED17 E26 O U 150 5.43 3.43 45683 MXR150/U/MED/O M102 6 15,000 12,500 8,600 3500K 70 3, 4 93303384 LED/LC/ED17/7SC
175 Watts - Enclosed Rated
6,000H/ 11,700H/ 7,400H/ 4000K 60
BD17 E26 E U 175 5.75 3.43 18902 MVR175/U/MED M57 6 1, 2 93148082 LED45ED17/740
10,000V 14,000V 8,800V
6,000H/ 11,700H/ 7,900H/ 4000K 55
ED28 E39 E U 175 8.25 5.00 47760 MVR175/U M57 12 1, 2 22679 LED50ED23.5/740
10,000V 13,600V 8,800V
6,000H/ 11,900H/ 7,900H/ 3900K 55
ED28 E39 E U 175 8.25 5.00 47761 MVR175/C/U M57 12 1, 2 22679 LED50ED23.5/740
10,000V 12,900V 8,400V
250 Watts - Enclosed Rated
6,000H/ 19,100H/ 12,400H/
ED28 E39 E U 250 8.25 5.00 42729 MVR250/U M58 12 22635 LED80ED23.5/740
20,800V 13,500V 4200K 60 1, 2
10,000V
250 Watts - Enclosed Rated, PulseArc
12,000H/ 18,600H/ 12,000H/
ED28 E39 E U 250 8.25 5.00 78665 MVR250/U/PA M138/M153 12 22635 LED80ED23.5/740
22,400V 14,000V 3900K 60 1, 2
15,000V
320 Watts - Enclosed Rated, PulseArc
ED28 E39 E VBU 320 8.25 5.00 27501 MVR320/VBU/HO/PA M132/M154 12 20,000 31,000 18,000 4000K 60 1, 2 22622 LED115ED28/740
320 Watts - Open Rated
ED37 EX39 O VBU 320 11.50 7.00 46275 MPR320/VBU/XHOPA M132/M154 6 20,000 32,000 22,500 4000K 65 3, 4 22622 LED115ED28/740
ED28 EX39 O VBU 320 8.25 5.00 19609 MPR320/C/PA/ED28 M132/M154 12 20,000 30,600 22,500 3700K 70 3, 4 22622 LED115ED28/740
400 Watts - Enclosed Rated
15,000H/ 33,100H/ 22,100H/ 4000K 60
ED28 E39 E U 400 8.25 5.00 18904 MVR400/U/ED28 M59 12 1, 2 22611 LED150ED28/740
20,000V 38,000V 23,500V
400 Watts - Enclosed Rated, PulseArc
15,000H/ 31,200H/ 18,000H/
ED37 E39 E U 400 11.50 7.00 78666 MVR400/U/PA M135/M155 6 22611 LED150ED28/740
20,000V 39,400V 22,000V 4000K 60 1, 2
ED28 E39 E VBU 400 8.25 5.00 46271 MVR400/VBUED28PA M135/M155 12 20,000 44,000 28,500 4000K 65 1, 3 22611 LED150ED28/740
ED28 E39 E HOR 400 8.25 5.00 72885 MVR400/HOR/ED28/PA M135/M155 12 20,000 38,000 21,400 4100K 65 1, 3 22611 LED150ED28/740
400 Watts - Open Rated
ED37 EX39 O VBU 400 11.50 7.00 46273 MPR400/VBU/XHOPA M135/M155 6 20,000 42,000 29,500 4000K 65 3, 4 22611 LED150ED28/740
ED37 EX39 O VBU 400 11.50 7.00 18708 MPR400/VBU/HO/O M59 6 20,000 40,000 36,000 3400K 65 3, 4 93311586 LED/LC/ED37/740
1000 Watts - Enclosed Rated
9,000H/ 105,000H/ 82,000H/ 3700K 65
BT37 E39 E U 1000 11.50 7.00 18205 MVR1000/U/BT37 M47 6 1, 2 93311586 LED/LC/ED37/740
12,000V 1150,00V 90,000V
1000 Watts - Open Rated
BT56 EX39 O VBU 1000 15.37 9.50 41433 MPR1000/VBU/HO/O M47 6 12,000 110,000 88,500 3500K 65 3, 4 93096445 LED450BT56/740
1500 Watts - Enclosed Rated
1620,00H/ 137,000H/ 4000K 65
BT56 E39 E U 1500 15.37 9.50 47326 MVR1500/U/SPORTS M48 6 3,000 1, 2 93303389 LED470BT56/740
170,000V 153,000V
High Intensity Discharge Lamps

1
Minimum order quantity = Carton Qty

84 – www.LED.com/Lamps
High Intensity Discharge Lamps
Constant Color CMH ® Metal Halide Lamps LED Replacement
Car- Rated
Bulb Base MOL LCL Order ANSI Ballast ton Life Initial Mean Color Warning Order
Shape Type LET OP Watts (In) (In) Code Description Type Qty1 CBCP (hrs*) Lumens Lumens Temp. CRI Notice Code Description
CMH MR16/MR17
®

GX10 O U 20 2.28 85101 CMH20MR16/830/SP C156/M156 12 9,000 12,000 1,000 3000K 81 5

GX10 O U 20 2.28 85110 CMH20MR16/830/FL C156/M156 12 2,900 12,000 1,000 3000K 81 5
GX10 O U 39 2.28 71489 CMH39MR16/930/FL C130/M130 12 5,500 10,000 2,200 3000K 90 5
CMH® PAR
PAR30L E26 O U 39 4.75 42067 CMH39PAR30L/FL25 C130/M130 6 11,000 10,000 2,400 3000K 81 5 75091 LED18P30LW83025
CMH® Single-Ended G12
T6 G12 E U 39 3.56 2.18 20153 CMH39TUVCU830G12 C130/M130 12 15,000 3,400 2,300 3000K 84 5
G12 E U 70 3.56 2.18 20016 CMH70TU/830/G12 C139/M139 12 15,000 6,200 4,700 3000K 83 5
CMH® GU6.5
T4 GU6.5 E U 20 2.05 1.18 85086 CMH20T/U830GU6.5 C156/M156 12 12,000 1,615 1,066 3000K 81 5
GU6.5 E U 39 2.05 1.18 71484 CMH39T/U930GU6.5 C130/M130 12 10,000 3,400 2,300 3000K 88 5
CMH® Mini's
T4.5 G8.5 E U 20 3.37 2.00 92696 CMH20TCU830/G8.5 C156/M156 12 12,000 1,650 1,090 3000K 81 5
G8.5 E U 39 3.37 2.00 90352 CMH39TCU830/G8.5 C130/M130 12 16,500 3,400 2,300 3000K 84 5
G8.5 E U 70 3.37 2.00 92585 CMH70TCU830G8.5 C139/M139 12 15,000 6,200 4,400 3000K 83 5

High Pressure Sodium Lamps Type B LED Replacement

Car- Rated Warn-
Bulb Base MOL LCL Order ANSI ton Life Initial Mean Color ing Order
Shape Type LET OP Watts (In) (In) Code Description Ballast Type Qty1 (hrs*) Lumens Lumens Temp. CRI Notice Code Description
70-1000 Watts
B17 E26 O U 70 5.43 3.43 11339 LU70/MED/ECO S62 6 24,000+ 6,400 5,450 1900K 22 6 93112114 LED35ED17/730
ED23.5 E39 O U 70 7.75 5.00 85368 LU70/H/ECO S62 12 24,000+ 6,400 5,450 1900K 22 6 93303384 LED/LC/ED17/7SC
B17 E26 O U 100 5.50 3.43 13250 LU100/MED/ECO S54 6 24,000+ 9,500 8,550 2000K 22 6 93303384 LED/LC/ED17/7SC
ED23.5 E39 O U 100 7.75 5.00 85369 LU100/H/ECO S54 12 24,000+ 9,500 8,550 2000K 22 6 93312106 LED/LC/ED23.5/7SC
B17 E26 O U 150 5.75 3.50 13252 LU150/MED/ECO S55 6 24,000+ 16,000 14,400 2000K 22 6 93303384 LED/LC/ED17/7SC
ED23.5 E39 O U 150 7.75 5.00 85371 LU150/55/H/ECO S55 12 24,000+ 16,000 14,400 2000K 22 6 93112196 LED80ED23.5/730
ED18 E39 O U 200 9.75 5.75 85372 LU200/H/ECO S66 12 24,000+ 22,000 19,800 2100K 22 6 93312096 LED180ED18/730
E39 O U 250 9.75 5.75 85377 LU250/H/ECO S50 12 24,000+ 28,000 25,200 2100K 22 6 93312096 LED180ED18/730
E39 O U 400 9.75 5.75 85379 LU400/H/ECO S51 12 24,000+ 51,000 45,000 2100K 22 6 93312096 LED180ED18/730
E25 E39 O U 1000 15.06 8.75 44058 LU1000/ECO S52 6 24000+ 130,000 117,000 2100K 22 7

Mercury Lamps Type B LED Replacement

Car- Rated Warn-
Bulb Base MOL LCL Order ANSI Ballast ton Life Initial Mean Color ing Order
Shape Type LET OP Watts (In) (In) Code Description Type Qty1 (hrs*) Lumens Lumens Temp. CRI Notice Code Description
100-400 Watts
ED23.5 E39 O U 100 7.50 5.00 22575 HR100DX38 H38 12 20,000 4,000 2,800 3900K 50 8 93303384 LED/LC/ED17/7SC
E39 O U 175 8.25 5.00 24062 HR175DX39 H39 12 20,000 7,800 6,630 3900K 50 8 22679 LED50ED23.5/740
ED28 E39 O U 250 8.25 5.00 32127 HR250DX37 H37 12 20,000 11,200 7,840 3900K 50 8 22635 LED80ED23.5/740
ED37 E39 O U 400 11.31 7.00 23998 HR400DX33 H33 6 20,000 22,600 15,800 3900K 50 8 22611 LED150ED28/740

High Intensity Discharge Lamps

1
Minimum order quantity = Carton Qty

www.LED.com/Lamps – 85
 High Intensity Discharge Lamps
1 WARNING NOTICE NO. 1:

WARNING INSTRUCTIONS
Risk of electric shock LAMP OPERATING CHARACTERISTICS
• Turn power off before inspection, installation, or removal This is a discharge lamp and requires some time to restart
• Do not use where directly exposed to water or outdoors and come to full brightness after a power interruption.
without an enclosed fixture
RELAMP FIXTURES AT OR BEFORE THE END
Risk of fire OF RATED LIFE.
• Keep combustible materials away from lamp Beyond rated life, light output diminishes while energy
• Use in fixture rated for this product consumption and risk of lamp rupture increases.
A damaged lamp emits UV radiation which may cause SPECIFIED OPERATING POSITIONS
eye/skin injury VBU - Base up ± 15˚ VBD - Base down ± 15˚
• Turn power off if glass bulb is broken. Remove and HOR - Horizontal ± 15˚ HOR/PA - Horizontal ± 75˚
dispose of lamp. U - Universal
Unexpected lamp rupture may cause injury, fire, or All lamps are rated for enclosed fixtures, except lamps with
property damage S-rated ANSI codes operated in vertical position only (Base Up
• Turn lamp off at least once for 15 minutes per week. or Base Down), ± 15 degrees, can be used in an open fixture.
FAILURE TO COMPLY INCREASES THE RISK OF RUPTURE.
• Do not use beyond rated life. Beyond rated life, light Match ANSI code of lamp to code on ballast or luminaire.
output diminishes while energy consumption and risk of
Use in luminaire which comply with UL1598 or IEC 60598.
lamp rupture increases.
When used, fixture lens/diffuser material must be able to
• Do not use lamp if outer glass is scratched or broken
contain fragments of hot quartz or glass (up to 1100˚C).
• Do not use where directly exposed to water or outdoors
without an enclosed fixture Electrically insulate any metal to bulb support in luminaire to
• Lamps with E-rated ANSI codes must be operated in avoid decomposition of glass.
enclosed fixtures -- See Instructions
For total load, add auxiliary watts to lamp watts.
• Do not store flammable materials near/below S-rated
lamp in open fixture Not for use with lampholders that have stainless steel cen-
• Use only properly rated ballast ter contacts to avoid lamp or lampholder damage due to
• Do not exceed rated voltage arcing. (360-1000W only)
• Do not turn on lamp until fully installed
• Operate lamp only in specified position FOR USE ON DIMMING SYSTEMS
• If used on a dimming system, see instructions. Contact your local Current sales representative

CAUTION LAMP CONTAINS MERCURY

Risk of burn Manage in Accord with Disposal Laws.
• Allow lamp to cool before handling See www.lamprecycle.org or 1-800-327-0097
• Do not turn on lamp until fully installed WARNING: This lamp can cause serious skin burn and
Lamp may shatter and cause injury if broken eye inflammation from shortwave ultraviolet radiation if
High Intensity Discharge Lamps

• Wear safety glasses and gloves when handling lamp outer envelope of the lamp is broken or punctured. Do not
• Do not use lamp if outer glass is scratched or broken use where people will remain for more than a few minutes
• Dispose of lamp in a closed container unless adequate shielding or other safety precautions are
• Do not use excessive force when installing lamp used. Lamps that will automatically extinguish when the
• CAUTION: Do not stare at light source. May be harmful outer envelope is broken or punctured are commercially
to the eyes. Not applicable to diffuse coated bulbs. available. This lamp certified to comply with FDA radiation
performance standards, 21 CFR Subchapter J. USA: 21 CFR
1040.30 Canada: C.R.C., c. 1370

86 – www.LED.com/Lamps
High Intensity Discharge Lamps
2 WARNING NOTICE NO. 2: Lamp contains Radioactive Material Thorium

3 WARNING NOTICE NO. 3: Lamp contains Radioactive Materials Thorium and Kr-85

4 WARNING NOTICE NO. 4:

WARNING INSTRUCTIONS
Risk of electric shock LAMP OPERATING CHARACTERISTICS
• Turn power off before inspection, installation, or removal This is a discharge lamp and requires some time to restart
• Do not use where directly exposed to water or outdoors and come to full brightness after a power interruption.
without an enclosed fixture
Relamp fixtures at or before the end of rated life.
Risk of fire Beyond rated life, light output diminishes while energy
• Keep combustible materials away from lamp consumption increases.
• Use in fixture rated for this product
SPECIFIED OPERATING POSITIONS
A damaged lamp emits UV radiation which may cause VBU - Base up ± 15˚ VBD - Base down ± 15˚
eye/skin injury U - Universal
• Turn power off if glass bulb is broken. Remove and
dispose of lamp. Match ANSI code of lamp to code on ballast or luminaire.
Unexpected lamp rupture may cause injury, fire, or Use in luminaire which comply with UL1598 or IEC 60598.
property damage Lamps are suitable for open or enclosed fixtures.
• Do not use beyond rated life. Beyond rated life, light
Electrically insulate any metal to bulb support in luminaire
output diminishes while energy consumption increases.
to avoid decomposition of glass.
• Do not use lamp if outer glass is scratched or broken
• Do not use where directly exposed to water or outdoors For total load, add auxiliary watts to lamp watts.
without an enclosed fixture
• Turn lamp off at least once for 15 minutes per week FOR USE ON DIMMING SYSTEMS
• Do not store flammable materials near/below lamp Most vertical operating lamps are suitable for dimming.
• Use only properly rated ballast Contact your local Current sales representative
• Do not exceed rated voltage
• Do not turn on lamp until fully installed
• Operate lamp only in specified position
• If used on a dimming system, see instructions.
LAMP CONTAINS MERCURY
Manage in Accord with Disposal Laws.
See www.lamprecycle.org or 1-800-327-0097

CAUTION WARNING: This lamp can cause serious skin burn and
eye inflammation from shortwave ultraviolet radiation if
Risk of burn outer envelope of the lamp is broken or punctured. Do not
• Allow lamp to cool before handling use where people will remain for more than a few minutes
• Do not turn on lamp until fully installed unless adequate shielding or other safety precautions are
used. Lamps that will automatically extinguish when the

High Intensity Discharge Lamps

Lamp may shatter and cause injury if broken
• Wear safety glasses and gloves when handling lamp outer envelope is broken or punctured are commercially
• Do not use lamp if outer glass is scratched or broken available. This lamp certified to comply with FDA radiation
• Dispose of lamp in a closed container performance standards, 21 CFR Subchapter J. USA: 21 CFR
• Do not use excessive force when installing lamp 1040.30 Canada: C.R.C., c. 1370
• CAUTION: Do not stare at light source. May be harmful
to the eyes. Not applicable to diffuse coated bulbs.

www.LED.com/Lamps – 87
 High Intensity Discharge Lamps

5 WARNING NOTICE NO. 5:

WARNING INSTRUCTIONS
Risk of electric shock LAMP OPERATING CHARACTERISTICS
• Turn power off before inspection, installation, or removal This is a discharge lamp and requires some time to restart
• Do not use where directly exposed to water or outdoors and come to full brightness after a power interruption.
without an enclosed fixture
For total load, add auxiliary watts to lamp watts
Risk of fire
• Keep combustible materials away from lamp Relamp fixtures at or before the end of rated life.
• Use in fixture rated for this product Beyond rated life, light output diminishes while energy
• Use fused or thermally protected ballast - see instructions consumption increases.

Unexpected lamp rupture may cause injury, fire, or If power supply dips or is interrupted, lamps may
property damage extinguish and not restart. Turn off power supply for
• Do not exceed rated voltage 10-15 minutes and allow lamp to fully cool. Lamps will
• Do not use where directly exposed to water or outdoors restart when power is restored
without an enclosed fixture
Use on ballasts or systems that are either resistant to or
• Do not use lamp if outer glass is scratched or broken
will shut off in event of rectification
• Use only properly rated ballast
• Do not store flammable materials near/below lamp Lamp may be operated in any position.
• Do not use beyond rated life
UV Control is a quartz material that effectively cuts UVB
• Do not turn on lamp until fully installed
and UVC radiation.
All MR16 and 20W PAR use only on electronic ballast.
Lamps designated as CMH70/PAR30 do not require
CAUTION thermally protected ballasts

Risk of burn
• Allow lamp to cool before handling
• Do not turn on lamp until fully installed
Lamp may shatter and cause injury if broken
LAMP CONTAINS MERCURY
• Wear safety glasses and gloves when handling lamp Manage in Accord with Disposal Laws.
• Do not use lamp if outer glass is scratched or broken See www.lamprecycle.org or 1-800-327-0097
• Dispose of lamp in a closed container
• Do not use excessive force when installing lamp This product is in conformity with performance standards
for high intensity mercury vapor lamps products under 21
CFR 1040, except with respect to those characteristics
authorized by Variance Number FDA-2021-V-0995
effective September 27, 2021.
Arc tube fill gas contains Radioactive Material Kr-85
High Intensity Discharge Lamps

88 – www.LED.com/Lamps
High Intensity Discharge Lamps
6 WARNING NOTICE NO. 6:

WARNING INSTRUCTIONS
Risk of electric shock LAMP OPERATING CHARACTERISTICS
• Turn power off before inspection, installation, or removal This is a discharge lamp and requires some time to restart
• Do not use where directly exposed to water or outdoors and come to full brightness after a power interruption.
without an enclosed fixture
HPS lamps may be operated in any burn position.
Risk of fire
• Keep combustible materials away from lamp Match ANSI code of lamp to code on ballast or luminaire.
• Use in fixture rated for this product
Use in luminaire which comply with UL1598 or IEC 60598.
Contains sodium – chemical burn risk
• Avoid skin contact with broken pieces Electrically insulate any metal to bulb support in luminaire
to avoid decomposition of glass.
Unexpected lamp rupture may cause injury, fire, or
property damage For total load, add auxiliary watts to lamp watts.
• Do not exceed rated voltage Not for use with lampholders that have stainless steel
• Do not use where directly exposed to water or outdoors center contacts to avoid lamp or lampholder damage due
without an enclosed fixture to arcing. (400W only)
• Do not use lamp if outer glass is scratched or broken
• Use only properly rated ballast FOR USE ON DIMMING SYSTEMS
• Do not store flammable materials near/below lamp Contact your local Current sales representative
• Do not turn on lamp until fully installed

LAMP CONTAINS MERCURY

CAUTION Manage in Accord with Disposal Laws.
Risk of burn See www.lamprecycle.org or 1-800-327-0097
• Allow lamp to cool before handling
• Do not turn on lamp until fully installed
Lamp may shatter and cause injury if broken
• Wear safety glasses and gloves when handling lamp
• Do not use lamp if outer glass is scratched or broken
• Dispose of lamp in a closed container
• Do not use excessive force when installing lamp

High Intensity Discharge Lamps

www.LED.com/Lamps – 89
 High Intensity Discharge Lamps
7 WARNING NOTICE NO. 7:

WARNING INSTRUCTIONS
Risk of electric shock LAMP OPERATING CHARACTERISTICS
• Turn power off before inspection, installation, or removal This is a discharge lamp and requires some time to restart
• Do not use where directly exposed to water or outdoors and come to full brightness after a power interruption.
without an enclosed fixture
Match ANSI code of lamp to code on ballast or luminaire.
Risk of fire Or use suitable ballast and ignitor that complies with IEC
• Keep combustible materials away from lamp 60923 and IEC 60927.
• Use in fixture rated for this product - see instructions
Use in luminaire which comply with UL1598 or IEC 60598.
Contains sodium – chemical burn risk
• Avoid skin contact with broken pieces Fixtures must have a specially designed mogul base lamp
holder and must support the end of the lamp.
Unexpected lamp rupture may cause injury, fire, or
property damage In vertical base up applications with no vibration and/or
• Do not exceed rated voltage shock, a tempered glass enclosed fixture may be used in
• Do not use where directly exposed to water or outdoors place of the lamp end support.
without an enclosed fixture
• Do not use lamp if outer glass is scratched or broken Electrically insulate any metal to bulb support in luminaire
• Use only properly rated ballast to avoid decomposition of glass.
• Do not store flammable materials near/below lamp For total load, add auxiliary watts to lamp watts.
• Do not turn on lamp until fully installed
Not for use with lampholders that have stainless steel
center contacts to avoid lamp or lampholder damage due
to arcing.

CAUTION FOR USE ON DIMMING SYSTEMS

Contact your local Current sales representative
Risk of burn
• Allow lamp to cool before handling
• Do not turn on lamp until fully installed
Lamp may shatter and cause injury if broken LAMP CONTAINS MERCURY
• Wear safety glasses and gloves when handling lamp
Manage in Accord with Disposal Laws.
• Do not use lamp if outer glass is scratched or broken
See www.lamprecycle.org or 1-800-327-0097
• Dispose of lamp in a closed container
• Do not use excessive force when installing lamp
High Intensity Discharge Lamps

90 – www.LED.com/Lamps
High Intensity Discharge Lamps
8 WARNING NOTICE NO. 8:

WARNING INSTRUCTIONS
Risk of electric shock LAMP OPERATING CHARACTERISTICS
• Turn power off before inspection, installation, or removal This is a discharge lamp and requires some time to restart
• Do not use where directly exposed to water or outdoors and come to full brightness after a power interruption.
without an enclosed fixture
Lamp may be operated in any position.
Risk of fire
• Keep combustible materials away from lamp For Consumer Packaging - /CP
• Use in fixture rated for this product Do not use in standard incandescent light bulb sockets.
See instructions inside this carton
A damaged lamp emits UV radiation which may cause
eye/skin injury For total load, add auxiliary watts to lamp watts
• Turn power off if glass bulb is broken. Remove and
dispose of lamp. Relamp fixtures at or before the end of rated life.
Beyond rated life, light output diminishes while energy
Unexpected lamp rupture may cause injury, fire, or consumption increases.
property damage
• Do not exceed rated voltage SYSTEM CHARACTERISTICS -- Use Current Approved
• Do not use where directly exposed to water or outdoors Ballast/Control Gear. For further information contact your
without an enclosed fixture local Current sales representative
• Do not use lamp if outer glass is scratched or broken
• Use only properly rated ballast
• Do not store flammable materials near/below lamp
• Do not use beyond rated life
• Do not turn on lamp until fully installed
LAMP CONTAINS MERCURY
Manage in Accord with Disposal Laws.
See www.lamprecycle.org or 1-800-327-0097
WARNING: This lamp can cause serious skin burn and
CAUTION eye inflammation from shortwave ultraviolet radiation if
outer envelope of the lamp is broken or punctured. Do not
Risk of burn use where people will remain for more than a few minutes
• Allow lamp to cool before handling unless adequate shielding or other safety precautions are
• Do not turn on lamp until fully installed used. Lamps that will automatically extinguish when the
Lamp may shatter and cause injury if broken outer envelope is broken or punctured are commercially
• Wear safety glasses and gloves when handling lamp available. This lamp certified to comply with FDA radiation
• Do not use lamp if outer glass is scratched or broken performance standards, 21 CFR Subchapter J. USA: 21 CFR
• Dispose of lamp in a closed container 1040.30 Canada: C.R.C., c. 1370
• Do not use excessive force when installing lamp

High Intensity Discharge Lamps

www.LED.com/Lamps – 91
 Compact Fluorescent Lamps
Compact Fluorescent lighting offers high light output and long life for all your commercial plug-in
applications.

Reference Guide | Bulb Identification

NOMINAL LENGTH

NOMINAL LENGTH:
Overall length including base or pins.
Note: Lamp drawings are not drawn to scale. Be sure to
check size and dimension information when identifying
each lamp.
To convert inches to millimeters, multiply the dimension (in
inches) by 25.4 (i.e. 1.5" x 25.4 = 38.1 mm).

Lamp Drawings (not drawn to scale)

F5BX
F5BX F7BX
F7BX F9BX
F9BX F13BX
F13BX F9DBX F13DBX
F9DBX F13DBX F13DBX
F13DBX F18DBX
F18DBX F26DBX 4-Pin 2D®
4-Pin 2D®
G23
G23 G23
G23 G23
G23 GX23
G23 G23-2 GX23-2
G23-2 GX23-2 G24d-1
G24d-1 G24d-2 G24d-3
G24d-3 GR10Q-4

2-Pin
2-PinLow
LowWattage Biax®
Wattage Biax® 2-Pin DoubleBiax
2-Pin Double Biax®
® 4-Pin 2D®
4-Pin 2D ®
Compact Fluorescent Lamps

F13DBX
F13DBXF18DBX
F18DBXF26DBX
F26DBX F13TBX
F13TBX F18TBX
F18TBX F26TBX
F26TBX F32TBX
F32TBX F42TBX
F42TBX F57QBX
F57QBX F70QBX
F70QBX F18BX
F18BX F27BX
F27BX F39BX
F39BX F40BX
F40BX F50BX
F50BX F55BX
F55BX
G24q-1 G24q-2
G24q-1 G24q-2 G24q-3
G24q-3 GX24q-1
GX24q-1 GX24q-2
GX24q-2 GX24q-3
GX24q-3 GX24q-3
GX24q-3 GX24q-4
GX24q-4 GX24q-5 GX24q-6
GX24q-5 GX24q-6 2G11
2G11 2G11
2G11 2G11
2G11 2G11
2G11 2G11
2G11 2G11
2G11

4-Pin
4-Pin Double Biax®
Double Biax®
4-Pin
4-PinTriple
TripleBiax®
Biax® 4-Pin
4-Pin High OutputBiax
High Output Biax®
® 4-Pin High
4-Pin HighLumen
LumenBiax®
Biax®

Plug-inLamps
Plug-in Lamps

92 – www.LED.com/Lamps
Compact Fluorescent Lamps
Base Identification (not drawn to scale)

G23-2
G23-2 GX23-2
G23-2 G24d-1
G23d-1 G24d-2
G24d-2 G24d-3
G24d-3 G23 GX23
(DBX2P)
(DBX2P) (DBX2P)
(DBX2P) (DBX2P)
(DBX2P) (DBX2P)
(DBX2P) (DBX2P)
(DBX2P) (LWBX) (LWBX)

G24q-1
G24q-1 G24q-2
G24q-2 G24q-3
G24q-3 GU 24 GRY10q-3
GRY10q-3 GR10q-4
GR10q-4
(DBX4P)
(DBX4P) (DBX4P)
(DBX4P) (DBX4P)
(DBX4P) (2D4P)
(2D4P) (2D4P)
(2D4P)

2G11-4
2G11-4
(HLBX)
(HLBX)

GX24q-1
GX24q-1 GX24q-2
GX24q-2 GX24q-3
GX24q-3 GX24q-4
GX24q-4 GX24q-5
GX24q-5 GX24q-6
GX24q-6
(TBX4P)
(TBX4P) (TBX4P)
(TBX4P) (TBX4P)
(TBX4P) (TBX4P)
(TBX4P) (QBX4P)
(QBX4P) (QBX4P)
(QBX4P)

Compact Fluorescent Lamps

www.LED.com/Lamps – 93
 Compact Fluorescent Lamps
Catalog Logic:
The following terms and descriptions can help you when checking Compact Fluorescent lamp specifications and
when ordering products. Within each product line, lamps are divided into families and listed by base and wattage.

Color Temperature – Kelvins (K):

Nominal Length (in): A measure of the visual "warmth" or "coolness" of the
Lamp length including light from the lamp. The higher the value, the whiter LED Replacement:
base and/or pins. or "cooler" the light appears. Current offers a wide range of LED replacement
Watts: Means Lumens: lamps. The LED lamp models are provided as
Energy used (as defined Order Code: Lamp light output at 40% of rated general guidance. Often, there will be more than
by FTC Lamp Label Rules). Use the order code when lamp life or 8K hours for lamps one LED Lamp that may be used to replace
To estimate energy ordering to ensure that you exceeding 20K hours life. Color Rendering Index a Traditional lamp. For Traditional lamps that
consumption (kWh), receive the exact product (CRI or R): operated off a ballast, the ballast bypass (UL
multiply watts x hours of you require. Initial Lumens: An indication of the Type B) LED option is given unless otherwise
use and divide by 1000. Lamp light output after the ability of the lamp to noted. The application should be considered
initial 100 hours of operation. render object colors in when selecting an LED replacement lamp.
Rated Life (hours): a normal natural way. Sometimes, Traditional lamps do not have
Base: Life (as defined by FTC The higher the number a suitable LED replacement due to special
The type Description: Lamp Label Rules) is (0-100), the better the application considerations, such as very high
of base Lamp Model rated life in hours. color appearance heat. Contact Current for additional guidance if
Description the appropriate LED solution is unclear.

Carton Quantity:
Number of lamps
packed in a carton

LED Replacement

Car- Rated
Nominal ton Life Initial Mean Color
Base Type Watts Length (in.) Order Code Description Qty (hrs.) Lumens Lumens Temp. CRI Order Code Description
2-Pin Low Wattage Biax®

GX23 13 7.0 97573 F13BX/827/ECO 100 10,000 825 710 2700K 82 91404 LED5GX23/827 (Type A)

F13BX/827/ECO
Identifies as Identifies TCLP compliant lamp
Fluorescent lamp
Identifies Lamps Color
Identifies Wattage
Identifies Lamps Shape
Compact Fluorescent Lamps

Lamp Contains Mercury.

Manage in Accord with Disposal Laws.
See www.lamprecycle.org or 1-800-327-0097

94 – www.LED.com/Lamps
Compact Fluorescent Lamps
**Fluorescent Phase-Out Regulations**: Several US states have enacted legislation that prohibit/will prohibit the sale
of Linear and Compact Fluorescent Lamps within their state. For more information including effective dates, please
visit www.LED.com/lamplegislation

Plug-In Lamps Type B LED Replacement

Car- Rated
Nominal ton Life Initial Mean Color
Base Type Watts Length (in.) Order Code Description Qty1 (hrs.) Lumens Lumens Temp. CRI Order Code Description
2-Pin Low Wattage Biax ®

GX23 13 7.0 97573 F13BX/827/ECO 10 10,000 825 710 2700K 82 93312495 LED5BGX23/827
GX23 13 7.0 97569 F13BX/835/ECO 10 10,000 825 710 3500K 82 93312507 LED5BGX23/835
GX23 13 7.0 97571 F13BX/841/ECO 10 10,000 825 710 4100K 82 93312513 LED5BGX23/840
4-Pin High Lumen Biax®
2G11 18 9.0 16053 F18BX/SPX35 10PK 10 10,000 1,200 1,080 3500K 82
2G11 18 9.0 16940 F18BX/SPX41 10PK 10 10,000 1,200 1,080 4100K 82
2G11 39 16.5 28393 F39BXSPX35RS10PK 10 12,000 2,850 2,565 3500K 82
2G11 39 16.5 28458 F39BXSPX41RS10PK 10 12,000 2,850 2,565 4100K 82
2G11 40 22.5 16953 F4030BXSPX30 10P 10 20,000 3,150 2,840 3000K 82 93136025 LED17B2G11/830
2G11 40 22.5 16648 F40/30BX/SPX35 10 20,000 3,150 2,840 3500K 82 93136086 LED17B2G11/835
2G11 40 22.5 16954 F40/30BX/SPX41 10 20,000 3,150 2,840 4100K 82 93136087 LED17B2G11/840
2G11 25 21.5 75400 F40/25BX835/IS/WM 10 20,000 2,600 2,400 3500K 82 93136086 LED17B2G11/835
2G11 55 20.7 31952 F55BX/835 25 20,000 4,800 4,080 3500K 82
2G11 55 20.7 31953 F55BX/840 25 20,000 4,800 4,080 4100K 82
2-Pin Double Biax®
GX23-2 13 4.7 97586 F13DBX23/827/ECO 10 12,000 810 685 2700K 82 93312531 LED8BGX23-2-O/827
GX23-2 13 4.7 97588 F13DBX23/835/ECO 10 12,000 810 685 3500K 82 93312543 LED8BGX23-2-O/835
GX23-2 13 4.7 97589 F13DBX23/841/ECO 10 12,000 810 685 4100K 82 93312549 LED8BGX23-2-O/840
Vertical: 93300088 LED11BG24-V/8SC/120-347-4PK
G24d-2 18 6.1 97577 F18DBX/827/ECO 10 12,000 1,250 980 2700K 82 Horizontal: 93300087 LED11BG24-H/8SC/120-347-4PK
Vertical: 93300088 LED11BG24-V/8SC/120-347-4PK
G24d-2 18 6.1 97579 F18DBX/835/ECO 10 12,000 1,250 980 3500K 82 Horizontal: 93300087 LED11BG24-H/8SC/120-347-4PK
Vertical: 93300088 LED11BG24-V/8SC/120-347-4PK
G24d-2 18 6.1 97580 F18DBX/841/ECO 10 12,000 1,250 980 4100K 82 Horizontal: 93300087 LED11BG24-H/8SC/120-347-4PK
Vertical: 93300088 LED11BG24-V/8SC/120-347-4PK
G24d-3 26 6.7 97606 F26DBX/827/ECO 10 12,000 1,710 1,460 2700K 82 Horizontal: 93300087 LED11BG24-H/8SC/120-347-4PK
Vertical: 93300088 LED11BG24-V/8SC/120-347-4PK
G24d-3 26 6.7 97608 F26DBX/835/ECO 10 12,000 1,710 1,460 3500K 82 Horizontal: 93300087 LED11BG24-H/8SC/120-347-4PK
Vertical: 93300088 LED11BG24-V/8SC/120-347-4PK
G24d-3 26 6.7 97609 F26DBX/841/ECO 10 12,000 1,710 1,460 4100K 82 Horizontal: 93300087 LED11BG24-H/8SC/120-347-4PK
4-Pin Double Biax®
G24q-1 13 5.0 97594 F13DBX/827/ECO4P 10 17,000 900 755 2700K 82 93300068 LED8BG24-O/827-4PK
G24q-1 13 5.0 97595 F13DBX/830/ECO4P 10 17,000 900 755 3000K 82 93300069 LED8BG24-O/830-4PK
G24q-1 13 5.0 97596 F13DBX/835/ECO4P 10 17,000 900 755 3500K 82 93300080 LED8BG24-O/835-4PK
G24q-1 13 5.0 97597 F13DBX/841/ECO4P 10 17,000 900 755 4100K 82 93300081 LED8BG24-O/840-4PK
G24q-2 18 5.8 97598 F18DBX/827/ECO4P 10 17,000 1,250 970 2700K 82 93300082 LED10BG24-O/827-4PK
G24q-2 18 5.8 97599 F18DBX/830/ECO4P 10 17,000 1,250 970 3000K 82 93300083 LED10BG24-O/830-4PK
G24q-2 18 5.8 97600 F18DBX/835/ECO4P 10 17,000 1,250 970 3500K 82 93300084 LED10BG24-O/835-4PK
G24q-2 18 5.8 97601 F18DBX/841/ECO4P 10 17,000 1,250 970 4100K 82 93300086 LED10BG24-O/840-4PK
Vertical: 93300088 LED11BG24-V/8SC/120-347-4PK
G24q-3 26 6.4 97610 F26DBX/827/ECO4P 10 17,000 1,800 1,530 2700K 82 Horizontal: 93300087 LED11BG24-H/8SC/120-347-4PK
Vertical: 93300088 LED11BG24-V/8SC/120-347-4PK
G24q-3 26 6.4 97611 F26DBX/830/ECO4P 10 17,000 1,800 1,530 3000K 82 Horizontal: 93300087 LED11BG24-H/8SC/120-347-4PK
Vertical: 93300088 LED11BG24-V/8SC/120-347-4PK
G24q-3 26 6.4 97612 F26DBX/835/ECO4P 10 17,000 1,800 1,530 3500K 82 Horizontal: 93300087 LED11BG24-H/8SC/120-347-4PK
Vertical: 93300088 LED11BG24-V/8SC/120-347-4PK
G24q-3 26 6.4 97613 F26DBX/841/ECO4P 10 17,000 1,800 1,530 4100K 82 Horizontal: 93300087 LED11BG24-H/8SC/120-347-4PK
4-Pin Triple Biax®
Vertical: 93300088 LED11BG24-V/8SC/120-347-4PK
GX24q-3 26 5.2 97614 F26TBX/827/A/ECO 10 17,000 1,800 1,530 2700K 82 Horizontal: 93300087 LED11BG24-H/8SC/120-347-4PK
Vertical: 93300088 LED11BG24-V/8SC/120-347-4PK
GX24q-3 26 5.2 97615 F26TBX/830/A/ECO 10 17,000 1,800 1,530 3000K 82 Horizontal: 93300087 LED11BG24-H/8SC/120-347-4PK

Compact Fluorescent Lamps

Vertical: 93300088 LED11BG24-V/8SC/120-347-4PK
GX24q-3 26 5.2 97616 F26TBX/835/A/ECO 10 17,000 1,800 1,530 3500K 82 Horizontal: 93300087 LED11BG24-H/8SC/120-347-4PK
Vertical: 93300088 LED11BG24-V/8SC/120-347-4PK
GX24q-3 26 5.2 97617 F26TBX/841/A/ECO 10 17,000 1,800 1,530 4100K 82 Horizontal: 93300087 LED11BG24-H/8SC/120-347-4PK
Vertical: 93312489 LED18BG24-V/8SC/120-347
GX24q-3 32 5.5 97629 F32TBX/827/A/ECO 10 17,000 2,400 2,040 2700K 82
Horizontal: 93312525 LED18BG24-H/8SC/120-347
Vertical: 93312489 LED18BG24-V/8SC/120-347
GX24q-3 32 5.5 97630 F32TBX/830/A/ECO 10 17,000 2,400 2,040 3000K 82
Horizontal: 93312525 LED18BG24-H/8SC/120-347
Vertical: 93312489 LED18BG24-V/8SC/120-347
GX24q-3 32 5.5 97631 F32TBX/835/A/ECO 10 17,000 2,400 2,040 3500K 82
Horizontal: 93312525 LED18BG24-H/8SC/120-347
Vertical: 93312489 LED18BG24-V/8SC/120-347
GX24q-3 32 5.5 97632 F32TBX/841/A/ECO 10 17,000 2,400 2,040 4100K 82
Horizontal: 93312525 LED18BG24-H/8SC/120-347
Vertical: 93312489 LED18BG24-V/8SC/120-347
GX24q-4 42 6.4 97633 F42TBX/827/A/ECO 10 17,000 3,200 2,690 2700K 82
Horizontal: 93312525 LED18BG24-H/8SC/120-347
Vertical: 93312489 LED18BG24-V/8SC/120-347
GX24q-4 42 6.4 97634 F42TBX/830/A/ECO 10 17,000 3,200 2,690 3000K 82
Horizontal: 93312525 LED18BG24-H/8SC/120-347
Vertical: 93312489 LED18BG24-V/8SC/120-347
GX24q-4 42 6.4 97635 F42TBX/835/A/ECO 10 17,000 3,200 2,690 3500K 82
Horizontal: 93312525 LED18BG24-H/8SC/120-347
Vertical: 93312489 LED18BG24-V/8SC/120-347
GX24q-4 42 6.4 97636 F42TBX/841/A/ECO 10 17,000 3,200 2,690 4100K 82
Horizontal: 93312525 LED18BG24-H/8SC/120-347

1
Minimum order quantity = Carton Qty

www.LED.com/Lamps – 95
 Halogen Lamps
Halogen Lighting offers unmatched quality of white light in compact sizes.

Reference Guide | Bulb Identification

DIA. in.: Diameter of bulb at widest point.

DIA.
MOL in.: Maximum Overall Length including base or pins.
LCL in.: Distance between the center of the filament and the
Light Center Length reference plane.
MOL Note: Lamp drawings are not drawn to scale. Be sure to
check size and dimension information when identifying each lamp.

To convert inches to millimeters, multiply the dimension

(in inches) by 25.4 (i.e. 1.5" x 25.4 = 38.1 mm).

Filament Identification

C-8
C-8 C-2V
C-2V C-6
C-6 C-8
C-8 C-6
C-6
CC-8
CC-8 CC-2V
CC-2V CC-6
CC-6 CC-8
CC-8 Oval
Oval

Base Identification (not drawn to scale)

2-Pin
2-Pin Can DC Bay 2-Pin Recessed Screw 4" Leads 1" Ribbon 6" Flex
(Round) GY6.35
2-Pin Recessed
Single Terminals
Screw 1" Leads
Ribbon Leads
6" Flex
(Round) Can DC Bay 4" Leads
GX5.3
GX5.3
GY6.35 Contact
Single Contact Terminals Leads Leads
R7s
R7s

2-Pin
2-Pin 2-Pin
2-Pin 2-Pin
2-Pin Turn &
Turn & Lock
Lock GU10 G8 G9 2-Pin Pf Min Screw
Min Screw DCBay
DC Bay MinCand
Min Cand
GU4 GU5.3 G4 GU7 GU10 G8 G9 2-Pin Pf E10 BA15d E11
GU4 GU5.3 G4 GU7 E10 BA15d E11
Halogen Lamps

Med Screw Mog Screw Mogul Ext. Mog

Ext. Mog Mog End
Mog End Med
Med
Med Screw MogE39
Screw Mogul BiPost
E26 BiPost End
End Pr
Pr PR
Pr Skirted
Skirted
E26 E39 G38
G38 GX16d
GX16d GX16d
GX16d E26/50x39
E26/50x39

96 – www.LED.com/Lamps
Halogen Lamps
Catalog Logic:
The following terms and descriptions can help you when checking Halogen lamp specifications and when
ordering products. Within each product line, lamps are divided into families and listed by wattage.

Bulb Shape:
followed by its size (the
Order Code: LCL (in): Color Temperature – Kelvins (K):
maximum diameter of
Use the order code when Distance between the center of the A measure of the visual "warmth" or "coolness" of the
the bulb expressed in
ordering to ensure that filament and the Light Center Length light from the lamp. The higher the value, the whiter
eighths of an inch).
you receive the exact reference plane, in inches. or "cooler" the light appears.
product you require. Filament Design:
Watts: Filaments are designated by a letter combination
Energy used (as defined Rated Life (hours):
in which C is coiled wire filament, CC is a coiled
by FTC Lamp Label Rules). Life (as defined by
wire that is itself wound into a larger coil and SR is CBCP (Center beam Candlepower:
To estimate energy FTC Lamp Label
straight ribbon filament. Numbers represent the type For reflector-type lamps, Center
consumption (kWh), Rules) is rated life
of filament-support arrangement. in hours. Beam Candlepower is the intensity
multiply watts x hours of
(candelas) at the center of
use and divide by 1000.
maximum intensity of the beam.
Description: Initial Lumens: Used only for ConstantColor® CMH®
Lamp Model Carton Quantity: MOL (in): Lamp light Metal Halide Lamps
Description Number of lamps Maximum output after the
packed in a carton Overall initial 100 hours
Length in of operation. Additional Information:
Base: Volts:
inches Typical application and/or
The type Lamp data is based
of base on operation at rated other important information.
voltage

Rated
Order Carton Filament MOL LCL Life Lumens Color Additional
Bulb Shape Base Type Watts Code Description Volts Qty Design (In) (In) (hrs*) Initial Temp. CBCP Information
Standard MR16
PAR36 Scrw Term 19877 35PAR36/H/FL30 12 12 C-6 2.75 4,000 250 3050K 900 Floodlight

35PAR36/H/FL30
Identifies as
lamp's wattage Beam Angle (30 = 30 degrees)

Identifies beam angle type (Flood or Spot),

Identifies the lamp shape and the code may also include base type or packaging
bulb diameter in eighths of inches Identifies the lamp information
type (Halogen)

Halogen Lamps

www.LED.com/Lamps – 97
 Halogen Lamps
Specialty Lamps
Rated
Bulb Order Carton Filament MOL LCL Life Lumens Color Additional
Shape Base Type Watts Code Description Volts Qty1 Design (In) (In) (hrs*) Initial Temp. CBCP Information
Compact PAR36
PAR36 Scrw Term 19877 35PAR36/H/FL30 12 12 C-6 2.75 4,000 250 3050K 900 Floodlight
Standard MR11
MR11 2-Pin G4 20 30773 Q20MR11/NFL30 12 10 C-6 1.38 3,500 2900K 600 Soft White
Low Voltage
T3 2-Pin GY6.35 35 34708 Q35T3/12V/CL 12 100 C-6 1.75 cm 2,000 550 Clear, 12V
Halogen G9
T4 G9 25 16754 Q25G9/CD 120 5 CC-8 1.77 1.26 3,000 240 6250K Carded
G9 40 16755 Q40G9/CD 120 5 CC-8 1.77 1.26 3,000 480 2750K Carded
Halogen Double Contact Bayonet (BA15d)
T4 BA15d 100 15508 Q100CL/DC 120 6 CC-8 2.44 1.38 2,000 1,600 2950K Clear
BA15d 150 43693 Q150CL/DC 120 6 CC-8 2.50 1.38 2,000 2,800 2950K Clear
BA15d 250 43697 Q250CL/DC 120 6 CC-8 3.00 1.63 2,000 5,000 2950K Clear
Halogen Recessed Single Contact (R7s)
T3 R7s 100 22489 Q100T3/CL/CD 5PK 210 60 C-8 3.13 1.25 1,500 1,650 2950K Clear, Horizontal, Carded
R7s 150 19378 Q150T3/CL/CD 5PK 120 60 C-8 3.13 1.25 1,500 2,400 2950K Clear, Horizontal, Carded
T2.5 R7s 300 43703 Q300T3/CL-6PK 120 144 C-8 4.69 2.25 2,000 5,950 2950K Clear, Horizontal
R7s 500 23731 Q500T3/CL 120 12 C-8 4.69 2.25 2,000 11,100 3000K Clear, Horizontal
R7s 500 23733 Q500T3/CL 130/120 12 C-8 4.69 2.25 2,000 10,550 3000K Clear, Horizontal

Rated
Bulb Order Carton Filament MOL LCL Life Lumens Color Additional
Shape Base Type Watts Code Description Volts Qty1 Design (In) (In) (hrs*) Initial Temp. Information
Halogen Miniature Candelabra Screw (E11)
T4 Mini-Cand 100 15507 Q100CL/MC 120 6 CC-8 2.81 1.38 2,000 1,600 2950K Clear
Mini-Cand 150 43694 Q150CL/MC 120 6 CC-8 3.00 1.38 2,000 2,800 2950K Clear
Mini-Cand 250 43699 Q250CL/MC 120 6 CC-8 3.16 1.63 2,000 5,000 2950K Clear
Mini-Cand 250 43700 Q250CL/MC 130/120 6 CC-8 3.16 1.63 2,000 5,000 2950K Clear
Halogen Lamps

1
Minimum order quantity = Carton Qty

98 – www.LED.com/Lamps
Incandescent Lamps
Incandescent Lighting is the familiar, dependable light source you've known for decades.

Reference Guide | Bulb Identification

DIA.

DIA: Diameter of bulb at widest point.

DIA. MOL: Maximum Overall Length including base or pins.
LCL: Distance between the center of the arc tube and
the Light Center Length reference plane.
MOL
MOL
Note: Lamp drawings are not drawn to scale. Be sure to check size and
LCL dimension information when identifying each lamp.
To convert inches to millimeters, multiply the dimension (in inches) by
25.4 (i.e. 1.5" x 25.4 = 38.1 mm).

Filament Identification

C-9 C-6 C-17 C-22 C-13 C-13D C-8 C-8 C-5 C-7A C-2V
CC-6 CC-8 CC-8 CC-2V

Base Identification (not drawn to scale)

Cand Screw Intermediate 3 Contact Med Med Screw Mog Screw 3 Contact Mogul Mog Pf
E12 E17 E26 E26 E39 E39D P40s

Med Skirt Can DC Bay Can SC Bay 2-Lug Sleeve 3-Lug Sleeve Med Pf Mogul BiPost
E26/50x39 B15 B22d B22-3 P28s G38 Incandescent Lamps

Screw Disc Base Single Contact Med BiPost Med Side Pr Ext. Mog End PR Mog End PR
Terminal Pf GX16d GX16d

www.LED.com/Lamps – 99
 Incandescent Lamps
Lamp Drawings (not drawn to scale)

A15 A15 A17 A19 A21 A21 A23 B8 B10 B13 C7 C7 CA8 CA9 CA10 CA10
Med 2 & 3-Lug Slv Med Med Med 3C Med Med Cand Cand Med Cand DC Bay Cand Med Cand Med
Lamp Shape A Lamp Shape B Lamp Shape C Lamp Shape CA

T6.5 T8
DC Bay Disc

T6.5 T8
Inter Med
G16.5 G16.5 G16.5 G16.5 G25 G30 G40 G40
Cand DC Bay SC Bay Med Med Med Skrt Med Mog
Lamp Shape G

T4 T4.5 T6 T6.5 T7 T7 T7 T8 T8 T8 T8 T8 T10 T10 T12 T14 T20 T20 T24 M14
Cand Cand Cand DC Bay Cand DC Bay Inter Cand DC Bay Inter SC Bay SC Pf Med Med Pf 3C Med Med Pf Mog BiPost Med BiPost Med Bi Post Med
Lamp Shape T Lamp Shape M

S6 S6 S6 S8 S8 S11 S11 S11 S11 S14 F10 F15 F20 RP11 E17
Cand DC Bay Inter SC Bay SC Pf Cand DC Bay Inter Med Med Cand Med Med SC Bay Med
Lamp Shape S Lamp Shape F Lamp Shape RP Lamp Shape E

ER30 ER39 BR30 BR40 R14 R14 R20 R25 R30 R40 R40 R40 R52 P25
Med Med Med Med SC Bay Inter Med Med Med Med Med Skrt Mog Mog 3C Mog
Lamp Shape ER Lamp Shape BR Lamp Shape R Lamp Shape P

PAR20 PAR30 PAR36 PAR38 PAR38 PAR38 PAR46 PAR46

Med NP Med NP Scrw Trm Skrt Med Skrt Med Sid Pr Scrw Trm Mog End Pr
Incandescent Lamps

PAR56
PS25 PS25 PS30 PS30 PS35 PS40 PS40 PS52 PAR46 PAR56 PAR56 Mog End Pr PAR64 PAR64
3C Mog Med Med Mog Mog Mog Mog Pf Mog Med Sid Pr Scrw Trm Mog End Pr (6X16DEXT) Scrw Trm Ex Mog End Pr
Lamp Shape PS Lamp Shape PAR

100 – www.LED.com/Lamps
Incandescent Lamps
Catalog Logic:
The following terms and descriptions can help you when checking Incandescent lamp specifications and when
ordering products. Within this product line, lamps are listed by wattage.

Filament Design:
Filaments are designated by
Bulb Shape: a letter combination in which
Order Code: C is coiled wire filament, CC LED Replacement:
followed by its size (the
Use the order code when is a coiled wire that is itself Additional Current offers a wide range of LED
maximum diameter of
ordering to ensure that wound into a larger coil and Information: replacement lamps. The LED lamp
the bulb expressed in
you receive the exact SR is straight ribbon filament. Typical models are provided as general
eighths of an inch). Color Temperature – Kelvins (K):
product you require. Numbers represent the type of application and/ guidance. Often, there will be
A measure of the visual "warmth"
filament-support arrangement. or other important more than one LED Lamp that may
or "coolness" of the light from
Watts: information. be used to replace a Traditional
the lamp. The higher the value,
Energy used (as defined MOL (in): lamp. For Traditional lamps that
Description: the winter or "cooler" the light
by FTC Lamp Label Rules). Maximum operated off a ballast, the ballast
Lamp Model Description appears.
To estimate energy Overall bypass (UL Type B) LED option is
Rated Life (hours): CBCP (Center beam given unless otherwise noted. The
consumption (kWh), Length in
Life (as defined by FTC Candlepower: application should be considered
multiply watts x hours of Carton Quantity: inches
Lamp Label Rules) is For reflector-type when selecting an LED replacement
use and divide by 1000. Number of lamps
rated life in hours. lamps, Center Beam lamp. Sometimes, Traditional
packed in a carton Candlepower is the lamps do not have a suitable
intensity (candelas) LED replacement due to special
Base: Initial Lumens: at the center of
Volts: application considerations, such
The type Lamp light maximum intensity of
Lamp data as very high heat. Contact Current
of base output after the the beam. Used only for
is based on for additional guidance if the
initial 100 hours ConstantColor® CMH®
operation at appropriate LED solution is unclear.
of operation. Metal Halide Lamps
rated voltage

LED Replacement
Car- Rated
Bulb Order ton Filament MOL LCL Life Lumens Color Additional Order
Shape Base Type Watts Code Description Volts Qty Design (In) (In) (hrs*) Initial Temp CBCP Information Code Description
3-8 Watts
S6 Cand 3 11098 3S6/5 24PK 130 24 C-7A 1.87 1.37 3,000 11 Clear-Indicator

15A/W-2PK
Identifies as 2PK = Inner carton of 2 lamps
lamp's wattage (Smallest unit of sale downstream)

Identifies the lamp shape and the Finish (CL = Clear,

bulb diameter in eighths of inches W = White)

Incandescent Lamps

www.LED.com/Lamps – 101
 Incandescent Lamps
Incandescent Lamps LED Replacement
Car- Rated
Bulb Order ton Filament MOL LCL Life Lumens Color Additional
Shape Base Type Watts Code Description Volts Qty1 Design (In) (In) (hrs*) Initial Temp CBCP Information Order Code Description
3-8 Watts
S6 Cand 3 11098 3S6/5 24PK 130 24 C-7A 1.87 1.37 3,000 11 Clear-Indicator
Cand 6 11374 6S6 155 155 240 C-7A 1.87 1.37 1,500 38 Clear-Indicator
T4.5 Cand 6 11764 6T41/2/1 130 100 C-7A 1.87 1.31 1,500 42 Clear-Indicator
15 Watts
A15 Med 15 97491 15A/W-2PK 120 24 C-9 3.50 2.37 2,500 110 Soft-White 93142810 LED4DFA15-W-2PK
S11 DC Bay 15 13188 15S11/3DC 75 120 C-9 2.37 1.25 1,000 138 Clear-Train
T6 Cand 15 13402 15T6 145 60 C-7A 3.06 1.56 1,500 102 Clear-Exit
T7 Cand 15 13494 15T7C 120 120 C-7A 2.25 1.50 3,000 108 Clear-Appliance
18 Watts
S11 BA15s 18 13655 18S11/1SC 10 120 CC-6 2.37 1.25 2,000 200 Clear-Railway
20 Watts
T6.5 DC Bay 20 34241 20T61/2DC/F 120 60 C-8 5.56 5,000 90 Frost-Exit Light
T6.5 Inter 20 34272 20T61/2/F 120 60 C-8 5.50 7,000 90 Frost-Exit Light
25 Watts
T7 DC Bay 25 14741 25T7DC 120 60 C-7A 2.25 1.31 1,000 195 Clear-Appliance
T7 Inter 25 14791 25T7N 120 60 C-7A 2.25 1.56 1,000 195 Clear-Appliance
T10 Med 25 14880 25T10 24PK 120 192 C-8 5.60 1,000 250 Clear-Display Light
B10 Med 25 22756 25BM CD2 120 60 C-7A 4.62 1,500 170 2500K Clear, Blunt Tip 93142811 LED4DFBM-C-2PK
CA10 Cand 25 40045 25CAC/L 120 120 CC-2V 4.12 4,000 210 2500K Clear, Bent Tip 93142792 LED3DFCAC-C-2PK
40 Watts
A15 Med 40 15206 40A15 CARD 12PK 120 60 C-9 3.50 2.37 1,500 415 2600K Clear-Oven Light 93142809 LED4DFA15-C-2PK
50 Watts
A19 Med 50 16201 50A19/RS/SH 75 120 C-9 3.87 2.50 1,000 500 Train/Rough Service
200 Watts
A21 Med 200 16069 200A/CL-1 12PK 120 12 CC-8 5.37 4.06 750 3,780 2900K Crystal 93309226 LED23A21/827
PAR56 Scrw Term 200 20122 200PAR 30 12 CC-8 4.50 350 230,000 Locomotive
250 Watts
R40 Med 250 37770 250R40/1 6PK 120 30 C-9 6.56 5,000 2,200 Heat Lamp
300 Watts
PS25 Med 300/266 73788 300M/130V-PK6 130/120 6 CC-8 6.93 4.92 750/1,950 6,120/4,650 Clear 93303384 LED/LC/ED17/7SC
PS35 Mog Screw 300 21025 300 130 24 C-9 9.37 7.00 1,000 5,820 Clear 93303384 LED/LC/ED17/7SC
Mog Screw 300 21079 300/IF 130 24 C-9 9.37 7.00 1,000 5,820 Inside Frost 93303384 LED/LC/ED17/7SC
Mog Screw 300 20849 300PAR56/WFL 120 12 CC-13 5 2,000 3,840 2750K 11,000 Wide Flood
350 Watts
PAR56 Scrw Term 350 19866 350PAR56/SP 75 12 CC-8 4.50 500 6,200 Locomotive
375 Watts
R40 Med Skirt 375 21334 375R40/1 115 24 C-9 7.50 5,000 2,700 1,170 Infrared Reflector
Incandescent Lamps

1
Minimum order quantity = Carton Qty

102 – www.LED.com/Lamps
Ballasts

www.LED.com/Lamps – 103
 Linear Fluorescent Ballasts
Understanding Fluorescent Ballasts
GE introduced the first fluorescent ballast more than 70 years Fluorescent Ballast Types
ago. Today, Current is providing high-frequency electronic GE
Lamp ballasts for almost every fluorescent application.
Electronic Instant Start
The most common fluorescent ballast is the instant start
With our UltraMax® and UltraStart® ballasts, and is used typically in long 3 to 10-hour lamp cycle
we are bringing you the future in ballast applications. These ballasts are energy efficient and can
performance. deliver 20% to 40% energy savings when installed with
energy-efficient lamps in building retrofits. These ballasts
Current's UltraMax® instant-start and UltraStart® deliver >550 open circuit volts when starting lamps and
programmed start electronic ballasts transform the power
operate lamps at high frequencies which offers flicker-free
of light into efficiency and savings from store shelves to
operation and better lamp efficiencies. The ballasts are
the installation site. The foundation of the "Ultra" family
significantly quieter than conventional magnetic ballasts
of ballasts starts with its high efficiency ratings. High
and are backed by Current Lighting's system 5-year ballast
efficiency ballasts are a minimum of 90% efficiency with
limited warranty and extended lamp warranties.
some ballasts nearly 95% efficient which means the
ballast only consumes 5-10% of the total system power.
UltraMax® Professional Series
These high efficiency ballasts exceed minimum high
A family of high-efficiency T8 instant-start electronic linear
efficiency standards as established by almost all energy
fluorescent ballasts designed to optimize T8 lamps for
advocate groups, utility rebate programs and the NEMA
optimal system energy savings. UltraMax® ballasts have a
Premium® ballast program. The ballasts are marked with
low lamp current crest factor and virtually "read" and adapt
the Ultra brand as well as the NEMA Premium® ballast
mark. These ballasts have multi-voltage control (MVC), to incoming voltage from 108V to 305V. Other features
which automatically adjusts to handle voltage from 120V include UL Type CC Anti-Arc Rating and anti-striation
through 277V. That cuts the ballast models you need to control to eliminate lamp striations and spiraling. These
stock from 40 down to 13, which can dramatically reduce ballasts are offered in ballast factors: low wattage (.77),
inventory carrying costs. UltraMax® ballasts have ArcGuard normal light (.87), normal-high (N+) (1.0) and high (>1.15).
Protection, too, with a UL Type CC Anti-Arc Rating. Plus,
they're ultra-lamp-friendly, with a low lamp current crest UltraMax® General Series
factor of 1.4 for optimal lamp performance. Both UltraMax® Offered in dedicated or multi-volt (120-277V), these high
and UltraStart® have anti-striation control for better light performance T8 instant-start ballasts also meet minimum
quality with no lamp striations (spiraling). And the small, efficiency requirements as established with the NEMA
low-profile design of these ballasts makes retrofits Premium® ballast program. These ballasts are offered in
effortless at the job site. Also unique to our programmed ballast factors: low wattage (.77), normal light (.87) and
start UltraStart® ballasts is parallel lamp operation which high (>1.15).
means that if one lamp fails the others remain on and
quick starting times of less than 700 milliseconds which is
necessary in avoiding delays with automatic sensors.
Linear Fluorescent Ballasts

104 – www.LED.com/Lamps
Programmed Instant Start Ballast Date Codes
Programmed Start electronic ballasts have a lamp starting Date Code
method that preheats lamp filaments before applying Electronic ballast manufacturing date codes are located on
an open circuit voltage (OCV) to start the lamp. Use the upper right-hand corner of the label. The code lists the
Programmed Start ballasts to ensure long lamp life when month, year and day of manufacture. A typical code is C16-
turning lamps on and off more than five times in a day or 073, where the month is listed as A (January), B (February), C
in conjunction with any automatic light control or sensor. (March) as in this code followed by the year 16 (2016) and
This type of starting circuit keeps lamp-end blackening to the date of manufacture 073 (the 73rd day of 2016).
a minimum and improves lamp life performance, especially
in applications where the lamps are frequently switched on Ballast Life
and off. Electronic ballasts are designed and manufactured to an
average life expectancy of 60,000 hours of operation at
UltraStart® maximum rated case temperatures. As a rule of thumb,
UltraStart® is a family of high-efficiency Programmed Start ballast life is doubled for every 10C reduction in ballast case
electronic linear fluorescent ballasts that also exceed NEMA temperature. However there are other variables such as
Premium® ballast efficiency requirements but are designed transients, voltage sags and swells, ambient temperature,
to optimize T8 lamps in frequently switched applications. etc., which affect ballast life as well.
Instant start ballasts provide 7,000-13,000 starts before
50% lamp failure. UltraStart® provides greater than 100,000 Instant Start vs. Rapid Start Sockets
starts before 50% lamp failure. UltraStart® ballasts provide When using programmed start or dimming ballasts in
the same energy savings and convenience of instant start fixtures, sockets must be 2-pin rapid start type. Fixtures
ballasts but with the longer lamp life offered a programmed with T8 instant start ballasts must use jumpered rapid
start ballast. These ballasts are offered in ballast factors: start sockets or shunted lamp holders (internal to the
programmed start x-low wattage (XL) (.60), low wattage lamp holder) that bridge the lamp bi-pins together into
(.71), normal light (.87) and high (>1.15). one contact on each side of the lamp. If retrofitting
from a instant start ballast fixture with shunted sockets
to a dimming or programmed start ballast, rapid start
Linear Fluorescent Ballasts
type sockets must be used to properly start lamps and
maintain rated lamp life.

www.LED.com/Lamps – 105
 Linear Fluorescent Ballasts
73190 – GE232MAXP-H/ULTRA • T8 Instant Start Ballasts For F17 (2ft), F25 (3ft), F32 (4ft), F40 (5ft) Lamps
• Energy-saving high-efficiency instant-start electronic ballast (>90%)
UltraMax® P-Series Instant Start • Multi-voltage technology handles voltage from 120 to 277V
• UL Type CC Rating provides protection against arcing in electrical devices
Multi-Voltage High-Efficiency • Anti-striation control for better light quality
2 or 1 – F32T8 120 to 277 "H" 1.18 BF UltraMax P ®
• UL 55°C Ambient Temperature rating
• Cold temperature -22°F Minimum Starting Temperature
General Characteristics Dimensions
Ballast Type Electronic – High-Efficiency Multivolt Instant Start Length (L) 9.5 in (241 mm)
Starting Method Instant Start
Width (W) 1.3 in (33 mm)
Lamp Wiring Parallel
Height (H) 1.0 in (25.4 mm)
Line Voltage Regulation(+/-) 10%
Ambient Temperature (MAX) 55°C (131°F) Mounting Dimensions
Case Temperature (MAX) 90°C (194°F) Mount Length (M) 8.9 in (226 mm)
Ballast Factor High Mount Width (X or F) 0.87 in (22 mm)
Power Factor Correction Active
Mount Slots (MS) 0.3 in (8 mm)
Sound Rating A (20-24 decibels)
Enclosure Type Metal Weight 0.7lbs
Anti-striation control, Auto-restart, Inherently Thermally Exit Type Side
Additional Info
Protected, UL Class P
Remote Mounting Distance to Lamp (F32T8) 18ft

Electrical Characteristics Remote Mounting Wire Gauge 18 AWG

Supply Current Frequency 50 Hz/60 Hz Lead Lengths
Black 25 in (635 mm)
White 25 in (635 mm)
Blue 31 in (787 mm)
Red 37 in (940 mm)

Specifications and lamp wattage

# of Line Volts System Watts Nom. Line System Ballast Ballast Efficacy Power Factor
Lamp Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps (V) (W) Current (A) Factor Factor % (>=)
2 120 74 0.62 1.19 1.61 99 1.5 10 -22/-30
2 277 73 0.26 1.19 1.63 98 1.5 10 -22/-30
F32T8
1 120 47 0.40 1.38 2.94 99 1.5 10 -22/-30
1 277 46 0.18 1.38 3.00 96 1.5 20 -22/-30
2 120 70 0.59 1.16 1.66 99 1.5 10 -22/-30
2 277 69 0.26 1.16 1.68 98 1.5 10 -22/-30
F32T8/WM
1 120 43 0.37 1.37 3.19 99 1.5 10 -22/-30
1 277 43 0.17 1.37 3.19 95 1.5 15 -22/-30
2 120 65 0.55 1.14 1.75 99 1.5 10 -22/-30
2 277 64 0.24 1.14 1.78 97 1.5 10 -22/-30
F28T8
1 120 40 0.34 1.34 3.35 99 1.5 10 -22/-30
1 277 41 0.16 1.34 3.27 94 1.5 20 -22/-30
2 120 60 0.51 1.16 1.93 99 1.5 10 -22/-30
2 277 60 0.22 1.16 1.93 97 1.5 15 -22/-30
F32T8/25W
1 120 38 0.32 1.37 3.60 99 1.5 15 -22/-30
1 277 38 0.15 1.37 3.60 94 1.5 20 -22/-30
2 120 62 0.52 1.17 1.87 99 1.5 10 -22/-30
2 277 61 0.22 1.17 1.90 97 1.5 15 -22/-30
F25T8
1 120 38 0.32 1.37 3.61 99 1.5 15 -22/-30
1 277 38 0.15 1.37 3.61 94 1.5 20 -22/-30
2 120 41 0.36 1.02 2.85 99 1.5 10 -22/-30
2 277 41 0.17 1.02 2.85 95 1.5 20 -22/-30
F17T8
1 120 26 0.23 1.21 5.27 99 1.5 15 -22/-30
1 277 27 0.12 1.21 5.07 90 1.5 20 -22/-30
2 120 32 0.29 1.02 3.19 99 1.5 15 -22/-30
2 277 33 0.14 1.02 3.09 93 1.5 20 -22/-30
Linear Fluorescent Ballasts

FE15T8
1 120 23 0.19 1.21 5.26 98 1.5 15 -22/-30
1 277 22 0.10 1.21 5.50 87 1.5 20 -22/-30
1 120 56 0.46 .66 1.18 99 1.5 10 -22/-30
F40T8
1 277 55 0.21 .66 1.20 94 1.5 15 -22/-30
2 120 64 0.54 1.11 1.73 99 1.5 10 0/-18
2 277 63 0.24 1.11 1.76 97 1.5 10 0/-18
F25T12
1 120 40 0.35 1.36 3.40 99 1.5 10 0/-18
1 277 40 0.16 1.36 3.40 94 1.5 15 0/-18

Safety and Performance

106 – www.LED.com/Lamps
Linear Fluorescent Ballasts
72266 – GE232MAXP-N/ULTRA • T8 Instant Start Ballasts For F17 (2ft), F25 (3ft), F32 (4ft), F40 (5ft) Lamps
• Energy-saving high-efficiency instant-start electronic ballast (>90%)
UltraMax® P-Series Instant Start • Multi-voltage technology handles voltage from 120 to 277V
• UL Type CC Rating provides protection against arcing in electrical devices
Multi-Voltage High-Efficiency • Anti-striation control for better light quality
2 or 1 – F32T8 120 to 277 "N" 87 BF UltraMax P ®
• UL 55°C Ambient Temperature rating
• Cold temperature -22°F Minimum Starting Temperature
General Characteristics Dimensions
Ballast Type Electronic – High-Efficiency Multivolt Instant Start Length (L) 9.5 in (241 mm)
Starting Method Instant Start
Width (W) 1.3 in (33 mm)
Lamp Wiring Parallel
Height (H) 1.0 in (25.4 mm)
Line Voltage Regulation(+/-) 10%
Ambient Temperature (MAX) 55°C (131°F) Mounting Dimensions
Case Temperature (MAX) 70°C (158°F) Mount Length (M) 8.9 in (226 mm)
Ballast Factor Normal Mount Width (X or F) 0.87 in (22 mm)
Power Factor Correction Active
Mount Slots (MS) 0.3 in (8 mm)
Sound Rating A (20-24 decibels)
Enclosure Type Metal Weight 0.7lbs
Anti-striation control, Auto-restart, Inherently Thermally Exit Type Side
Additional Info
Protected, UL Class P
Remote Mounting Distance to Lamp (F32T8) 18ft

Electrical Characteristics Remote Mounting Wire Gauge 18 AWG

Supply Current Frequency 50 Hz/60 Hz Lead Lengths
Black 25 in (635 mm)
White 25 in (635 mm)
Blue 31 in (787 mm)
Red 37 in (940 mm)

Specifications and lamp wattage

# of Line Volts System Watts Nom. Line System Ballast Ballast Efficacy Power Factor
Lamp Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps (V) (W) Current (A) Factor Factor % (>=)
2 120 54 0.47 .88 1.63 99 1.5 10 -22/-30
2 277 53 0.20 .88 1.66 98 1.5 10 -22/-30
F32T8
1 120 31 0.26 1.08 3.48 99 1.5 10 -22/-30
1 277 31 0.12 1.08 3.48 96 1.5 10 -22/-30
2 120 52 0.44 .87 1.67 99 1.5 10 -22/-30
2 277 51 0.19 .87 1.71 98 1.5 10 -22/-30
F32T8/WM
1 120 29 0.25 1.07 3.69 99 1.5 10 -22/-30
1 277 29 0.12 1.07 3.69 96 1.5 10 -22/-30
2 120 48 0.40 .85 1.77 99 1.5 10 -22/-30
2 277 47 0.17 .85 1.81 98 1.5 10 -22/-30
F28T8
1 120 27 0.24 1.05 3.89 99 1.5 10 -22/-30
1 277 27 0.11 1.05 3.89 95 1.5 10 -22/-30
2 120 44 0.37 .87 1.98 99 1.5 10 -22/-30
2 277 43 0.16 .87 2.02 98 1.5 10 -22/-30
F32T8/25W
1 120 25 0.23 .87 3.48 99 1.5 10 -22/-30
1 277 25 0.10 .87 3.48 94 1.5 10 -22/-30
2 120 44 0.38 .87 1.98 99 1.5 10 -22/-30
2 277 44 0.16 .87 1.98 98 1.5 10 -22/-30
F25T8
1 120 26 0.23 1.09 4.19 99 1.5 10 -22/-30
1 277 26 0.11 1.09 4.19 94 1.5 10 -22/-30
2 120 31 0.27 .88 2.84 99 1.5 10 -22/-30
2 277 31 0.12 .88 2.84 96 1.5 10 -22/-30
F17T8
1 120 19 0.17 1.09 5.74 99 1.5 10 -22/-30
1 277 19 0.08 1.09 5.74 90 1.5 20 -22/-30
2 120 25 0.21 .91 3.64 99 1.5 10 -22/-30
2 277 25 0.10 .91 3.64 93 1.5 15 -22/-30
FE15T8
1 120 16 0.14 .91 5.69 98 1.5 10 -22/-30 Linear Fluorescent Ballasts
1 277 16 0.07 .91 5.69 88 1.5 15 -22/-30
2 120 46 0.39 .93 2.02 99 1.5 10 0/-18
2 277 46 0.17 .93 2.02 98 1.5 10 0/-18
F25T12
1 120 27 0.24 .93 3.44 99 1.5 10 0/-18
1 277 27 0.11 .93 3.44 95 1.5 10 0/-18

Safety and Performance

www.LED.com/Lamps – 107
 Linear Fluorescent Ballasts
72262 – GE232MAXP-L/ULTRA • T8 Instant Start Ballasts For F17 (2ft), F25 (3ft), F32 (4ft), F40 (5ft) Lamps
• Energy-saving high-efficiency instant-start electronic ballast (>90%)
UltraMax® P-Series Instant Start • Multi-voltage technology handles voltage from 120 to 277V
• UL Type CC Rating provides protection against arcing in electrical devices
Multi-Voltage High-Efficiency • Anti-striation control for better light quality
2 or 1 – F32T8 120 to 277 "L" .77 BF UltraMax P ®
• UL 55°C Ambient Temperature rating
• Cold temperature -22°F Minimum Starting Temperature

General Characteristics Dimensions

Ballast Type Electronic – High-Efficiency Multivolt Instant Start Length (L) 9.5 in (241 mm)
Starting Method Instant Start
Width (W) 1.3 in (33 mm)
Lamp Wiring Parallel
Height (H) 1.0 in (25.4 mm)
Line Voltage Regulation(+/-) 10%
Ambient Temperature (MAX) 55°C (131°F) Mounting Dimensions
Case Temperature (MAX) 70°C (158°F) Mount Length (M) 8.9 in (226 mm)
Ballast Factor Low Mount Width (X or F) 0.87 in (22 mm)
Power Factor Correction Active
Mount Slots (MS) 0.3 in (8 mm)
Sound Rating A (20-24 decibels)
Enclosure Type Metal Weight 0.7lbs
Anti-striation control, Auto-restart, Inherently Thermally Exit Type Side
Additional Info
Protected, UL Class P
Remote Mounting Distance to Lamp (F32T8) 18ft

Electrical Characteristics Remote Mounting Wire Gauge 18 AWG

Supply Current Frequency 50 Hz/60 Hz Lead Lengths
Black 25 in (635 mm)
White 25 in (635 mm)
Blue 31 in (787 mm)
Red 37 in (940 mm)

Specifications and lamp wattage

# of Line Volts System Watts Nom. Line System Ballast Ballast Efficacy Power Factor
Lamp Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps (V) (W) Current (A) Factor Factor % (>=)
2 120 48 0.42 .78 1.63 99 1.5 10 -22/-30
2 277 48 0.19 .78 1.63 98 1.5 10 -22/-30
F32T8
1 120 30 0.24 .96 3.20 99 1.5 10 -22/-30
1 277 30 0.11 .96 3.20 95 1.5 10 -22/-30
2 120 46 0.39 .77 1.67 99 1.5 10 -22/-30
2 277 46 0.17 .77 1.67 98 1.5 10 -22/-30
F32T8/WM
1 120 28 0.22 .77 2.75 99 1.5 10 -22/-30
1 277 28 0.11 .77 2.75 94 1.5 10 -22/-30
2 120 43 0.36 .77 1.79 99 1.5 10 -22/-30
2 277 42 0.16 .77 1.83 97 1.5 10 -22/-30
F28T8
1 120 26 0.21 .77 2.96 99 1.5 10 -22/-30
1 277 26 0.10 .77 2.96 94 1.5 10 -22/-30
2 120 39 0.33 .78 2.00 99 1.5 10 -22/-30
2 277 39 0.15 .78 2.00 96 1.5 10 -22/-30
F32T8/25W
1 120 22 0.18 .78 3.55 98 1.5 10 -22/-30
1 277 22 0.09 .78 3.55 93 1.5 10 -22/-30
2 120 40 0.34 .78 1.95 99 1.5 10 -22/-30
2 277 40 0.15 .78 1.95 96 1.5 10 -22/-30
F25T8
1 120 23 0.21 .96 4.17 99 1.5 10 -22/-30
1 277 24 0.10 .96 4.00 93 1.5 15 -22/-30
2 120 28 0.24 .79 2.82 99 1.5 10 -22/-30
2 277 29 0.11 .79 2.72 94 1.5 10 -22/-30
F17T8
1 120 17 0.18 .98 5.76 99 1.5 10 -22/-30
1 277 18 0.08 .98 5.44 90 1.5 10 -22/-30
2 120 23 0.20 .78 3.39 99 1.5 10 -22/-30
2 277 23 0.10 .78 3.39 91 1.5 15 -22/-30
Linear Fluorescent Ballasts

FE15T8
1 120 14 0.13 .78 5.57 99 1.5 10 -22/-30
1 277 15 0.07 .78 5.20 87 1.5 10 -22/-30
2 120 42 0.35 .80 1.90 99 1.5 10 0/-18
2 277 41 0.15 .80 1.95 97 1.5 10 0/-18
F25T12
1 120 24 0.21 .80 3.33 99 1.5 10 0/-18
1 277 24 0.10 .80 3.33 95 1.5 10 0/-18

Safety and Performance

108 – www.LED.com/Lamps
Linear Fluorescent Ballasts
71723 – GE432MAXP-H/ULTRA • T8 Instant Start Ballasts For F17 (2ft), F25 (3ft), F32 (4ft), F40 (5ft) Lamps
• Energy-saving high-efficiency instant-start electronic ballast (>90%)
UltraMax® P-Series Instant Start • Multi-voltage technology handles voltage from 120 to 277V
• UL Type CC Rating provides protection against arcing in electrical devices
Multi-Voltage High-Efficiency • Anti-striation control for better light quality
4 or 3 – F32T8 120 to 277 "H" 1.18 BF UltraMax P ®
• UL 55°C Ambient Temperature rating
• Cold temperature -22°F Minimum Starting Temperature
General Characteristics Dimensions
Ballast Type Electronic – High-Efficiency Multivolt Instant Start Length (L) 9.5 in (241 mm)
Starting Method Instant Start
Width (W) 1.7 in (43 mm)
Lamp Wiring Parallel
Height (H) 1.18 in (30 mm)
Line Voltage Regulation(+/-) 10%
Ambient Temperature (MAX) 55°C (131°F) Mounting Dimensions
Case Temperature (MAX) 90°C (194°F) Mount Length (M) 8.9 in (226 mm)
Ballast Factor High Mount Width (X or F) 1.05 in (27 mm)
Power Factor Correction Active
Mount Slots (MS) 0.3 in (8 mm)
Sound Rating A (20-24 decibels)
Enclosure Type Metal Weight 1.4lbs
Anti-striation control, Auto-restart, Inherently Thermally Exit Type Side
Additional Info
Protected, UL Class P
Remote Mounting Distance to Lamp (F32T8) 18ft

Electrical Characteristics Remote Mounting Wire Gauge 18 AWG

Supply Current Frequency 50 Hz/60 Hz Lead Lengths
Black 25 in (635 mm)
White 25 in (635 mm)
Blue 31 in (787 mm)
Red 39 in (991 mm)

Specifications and lamp wattage

# of Line Volts System Watts Nom. Line System Ballast Ballast Efficacy Power Factor
Lamp Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps (V) (W) Current (A) Factor Factor % (>=)
4 120 148 1.30 1.18 .80 99 1.4 10 -22/-30
4 277 146 0.55 1.18 .81 98 1.4 10 -22/-30
F32T8
3 120 119 1.07 1.28 1.08 99 1.4 10 -22/-30
3 277 117 0.46 1.28 1.09 97 1.4 15 -22/-30
4 120 139 1.21 1.18 .85 99 1.4 10 50/10
4 277 136 0.51 1.18 .87 97 1.4 10 50/10
F32T8/WM
3 120 113 0.99 1.25 1.11 99 1.4 10 50/10
3 277 112 0.41 1.25 1.12 97 1.4 16 50/10
4 120 127 1.10 1.18 .93 99 1.4 10 50/10
4 277 125 0.48 1.18 .94 98 1.4 10 50/10
F28T8
3 120 105 0.91 1.24 1.18 99 1.4 10 50/10
3 277 102 0.40 1.24 1.22 97 1.4 16 50/10
4 120 120 1.06 1.18 .98 99 1.4 10 60/16
4 277 116 0.45 1.18 1.02 98 1.4 10 60/16
F32T8/25W
3 120 99 0.88 1.24 1.25 99 1.4 10 60/16
3 277 95 0.38 1.24 1.31 97 1.4 10 60/16
4 120 119 0.45 1.16 .97 97 1.4 10 -22/-30
4 277 121 1.06 1.16 .96 99 1.4 10 -22/-30
F25T8
3 120 101 0.87 1.27 1.26 99 1.4 10 -22/-30
3 277 100 0.38 1.27 1.27 96 1.4 17 -22/-30
4 120 79 0.62 1.16 1.47 99 1.4 10 -22/-30
4 277 78 0.31 1.16 1.49 96 1.4 10 -22/-30
F17T8
3 120 62 0.57 1.25 2.02 99 1.4 10 -22/-30
3 277 62 0.27 1.25 2.02 95 1.4 21 -22/-30
4 120 62 0.54 1.03 1.66 99 1.4 10 0/-18
4 277 62 0.26 1.03 1.66 95 1.4 20 0/-18
FE15T8
3 120 51 0.45 1.12 2.20 99 1.4 10 0/-18
Linear Fluorescent Ballasts
3 277 52 0.22 1.12 2.15 92 1.4 20 0/-18
3 120 146 1.27 1.22 .84 99 1.4 10 -22/-30
F40T8
3 277 142 0.54 1.22 .86 97 1.4 14 -22/-30
4 120 125 1.10 1.11 .89 99 1.4 10 0/-18
4 277 122 0.47 1.11 .91 97 1.4 14 0/-18
F25T12
3 120 101 0.90 1.22 1.21 99 1.4 10 0/-18
3 277 100 0.39 1.22 1.22 97 1.4 17 0/-18

Safety and Performance

www.LED.com/Lamps – 109
 Linear Fluorescent Ballasts
78627 – GE432MAXP-N/ULTRA • T8 Instant Start Ballasts For F17 (2ft), F25 (3ft), F32 (4ft), F40 (5ft) Lamps
• Energy-saving high-efficiency instant-start electronic ballast (>90%)
UltraMax® P-Series Instant Start • Multi-voltage technology handles voltage from 120 to 277V
• UL Type CC Rating provides protection against arcing in electrical devices
Multi-Voltage High-Efficiency • Anti-striation control for better light quality
4 or 3 – F32T8 120 to 277 "L" .87 BF UltraMax P ®
• UL 55°C Ambient Temperature rating
• Cold temperature -22°F Minimum Starting Temperature
General Characteristics Dimensions
Ballast Type Electronic – High-Efficiency Multivolt Instant Start Length (L) 9.5 in (241 mm)
Starting Method Instant Start
Width (W) 1.3 in (33 mm)
Lamp Wiring Parallel
Height (H) 1.0 in (25.4 mm)
Line Voltage Regulation(+/-) 10%
Ambient Temperature (MAX) 55°C (131°F) Mounting Dimensions
Case Temperature (MAX) 70°C (158°F) Mount Length (M) 8.9 in (226 mm)
Ballast Factor Normal Mount Width (X or F) 0.87 in (22 mm)
Power Factor Correction Active
Mount Slots (MS) 0.3 in (8 mm)
Sound Rating A (20-24 decibels)
Enclosure Type Metal Weight 0.9lbs
Anti-striation control, Auto-restart, Inherently Thermally Exit Type Side
Additional Info
Protected, UL Class P
Remote Mounting Distance to Lamp (F32T8) 18ft

Electrical Characteristics Remote Mounting Wire Gauge 18 AWG

Supply Current Frequency 50 Hz/60 Hz Lead Lengths
Black 25 in (635 mm)
White 25 in (635 mm)
Red & Blue 31 in (787 mm)
Yellow 39 in (991 mm)

Specifications and lamp wattage

# of Line Volts System Watts Nom. Line System Ballast Ballast Efficacy Power Factor
Lamp Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps (V) (W) Current (A) Factor Factor % (>=)
4 120 110 0.93 .88 .80 99 1.5 10 -22/-30
4 277 108 0.4 .88 .81 98 1.5 10 -22/-30
F32T8
3 120 92 0.78 .96 1.04 99 1.5 10 -22/-30
3 277 91 0.34 .96 1.05 98 1.5 10 -22/-30
4 120 103 0.87 .88 .85 99 1.5 10 -22/-30
4 277 101 0.37 .88 .87 98 1.5 10 -22/-30
F32T8/WM
3 120 85 0.73 .97 1.14 99 1.5 10 -22/-30
3 277 84 0.31 .97 1.15 98 1.5 10 -22/-30
4 120 94 0.80 .84 .89 99 1.5 10 -22/-30
4 277 92 0.34 .84 .91 98 1.5 10 -22/-30
F28T8
3 120 77 0.66 .93 1.21 99 1.5 10 -22/-30
3 277 76 0.29 .93 1.22 98 1.5 10 -22/-30
4 120 87 0.73 .87 1.00 99 1.5 10 -22/-30
4 277 87 0.32 .87 1.00 98 1.5 10 -22/-30
F32T8/25W
3 120 72 0.60 .89 1.24 99 1.5 10 -22/-30
3 277 71 0.26 .89 1.25 97 1.5 10 -22/-30
4 120 89 0.74 .86 .97 99 1.5 10 -22/-30
4 277 88 0.32 .86 .98 98 1.5 10 -22/-30
F25T8
3 120 74 0.62 .97 1.31 99 1.5 10 -22/-30
3 277 73 0.27 .97 1.33 97 1.5 10 -22/-30
4 120 61 0.53 .89 1.46 99 1.5 10 -22/-30
4 277 61 0.23 .89 1.46 97 1.5 10 -22/-30
F17T8
3 120 51 0.44 .99 1.94 99 1.5 10 -22/-30
3 277 51 0.20 .99 1.94 96 1.5 10 -22/-30
4 120 48 0.42 .77 1.60 99 1.5 10 -22/-30
4 277 48 0.19 .77 1.60 96 1.5 10 -22/-30
Linear Fluorescent Ballasts

FE15T8
3 120 41 0.35 .85 2.07 99 1.5 10 -22/-30
3 277 40 0.17 .85 2.13 94 1.5 10 -22/-30
4 120 91 0.78 .79 .87 99 1.5 10 0/-18
4 277 90 0.33 .79 .88 98 1.5 10 0/-18
F25T12
3 120 76 0.65 .87 1.14 99 1.5 10 0/-18
3 277 75 0.28 .87 1.16 98 1.5 10 0/-18

Safety and Performance

110 – www.LED.com/Lamps
Linear Fluorescent Ballasts
78625 – GE432MAXP-L/ULTRA • T8 Instant Start Ballasts For F17 (2ft), F25 (3ft), F32 (4ft), F40 (5ft) Lamps
• Energy-saving high-efficiency instant-start electronic ballast (>90%)
UltraMax® P-Series Instant Start • Multi-voltage technology handles voltage from 120 to 277V
• UL Type CC Rating provides protection against arcing in electrical devices
Multi-Voltage High-Efficiency • Anti-striation control for better light quality
4 or 3 – F32T8 120 to 277 "L" .77 BF UltraMax P ®
• UL 55°C Ambient Temperature rating
• Cold temperature -22°F Minimum Starting Temperature
General Characteristics Dimensions
Ballast Type Electronic – High-Efficiency Multivolt Instant Start Length (L) 9.5 in (241 mm)
Starting Method Instant Start
Width (W) 1.3 in (33 mm)
Lamp Wiring Parallel
Height (H) 1.0 in (25.4 mm)
Line Voltage Regulation(+/-) 10%
Ambient Temperature (MAX) 55°C (131°F) Mounting Dimensions
Case Temperature (MAX) 70°C (158°F) Mount Length (M) 8.9 in (226 mm)
Ballast Factor Low Mount Width (X or F) 0.87 in (22 mm)
Power Factor Correction Active
Mount Slots (MS) 0.3 in (8 mm)
Sound Rating A (20-24 decibels)
Enclosure Type Metal Weight 0.9lbs
Anti-striation control, Auto-restart, Inherently Thermally Exit Type Side
Additional Info
Protected, UL Class P
Remote Mounting Distance to Lamp (F32T8) 18ft

Electrical Characteristics Remote Mounting Wire Gauge 18 AWG

Supply Current Frequency 50 Hz/60 Hz Lead Lengths
Black 25 in (635 mm)
White 25 in (635 mm)
Red & Blue 31 in (787 mm)
Yellow 39 in (991 mm)

Specifications and lamp wattage

# of Line Volts System Watts Nom. Line System Ballast Ballast Efficacy Power Factor
Lamp Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps (V) (W) Current (A) Factor Factor % (>=)
4 120 98 0.82 .78 .80 99 1.5 10 -22/-30
4 277 96 0.35 .78 .81 98 1.5 10 -22/-30
F32T8
3 120 84 0.72 .88 1.05 99 1.5 10 -22/-30
3 277 83 0.31 .88 1.06 98 1.5 10 -22/-30
4 120 92 0.79 .76 .83 99 1.5 10 -22/-30
4 277 91 0.34 .76 .84 98 1.5 10 -22/-30
F32T8/WM
3 120 77 0.66 .83 1.08 99 1.5 10 -22/-30
3 277 76 0.28 .83 1.09 97 1.5 10 -22/-30
4 120 85 0.72 .75 .88 99 1.5 10 -22/-30
4 277 84 0.31 .75 .89 98 1.5 10 -22/-30
F28T8
3 120 68 0.59 .81 1.19 99 1.5 10 -22/-30
3 277 67 0.26 .81 1.21 97 1.5 10 -22/-30
4 120 78 0.66 .77 .99 99 1.5 10 -22/-30
4 277 77 0.29 .77 1.00 98 1.5 10 -22/-30
F32T8/25W
3 120 62 0.52 .81 1.31 99 1.5 10 -22/-30
3 277 61 0.22 .81 1.33 97 1.5 10 -22/-30
4 120 80 0.67 .76 .95 99 1.5 10 -22/-30
4 277 79 0.29 .76 .96 98 1.5 10 -22/-30
F25T8
3 120 66 0.55 .84 1.27 99 1.5 10 -22/-30
3 277 65 0.25 .84 1.29 97 1.5 15 -22/-30
4 120 56 0.47 .79 1.41 99 1.5 10 -22/-30
4 277 56 0.21 .79 1.41 96 1.5 10 -22/-30
F17T8
3 120 47 0.40 .86 1.83 99 1.5 10 -22/-30
3 277 47 0.18 .86 1.83 95 1.5 15 -22/-30
4 120 44 0.38 .76 1.73 99 1.5 10 -22/-30
4 277 44 0.18 .76 1.73 95 1.5 10 -22/-30
FE15T8
3 120 36 0.32 .76 2.11 99 1.5 10 -22/-30 Linear Fluorescent Ballasts
3 277 37 0.15 .76 2.05 93 1.5 15 -22/-30
4 120 81 0.69 .76 .94 99 1.5 10 0/-18
4 277 81 0.30 .76 .94 98 1.5 10 0/-18
F25T12
3 120 68 0.58 .76 1.12 99 1.5 10 0/-18
3 277 67 0.25 .76 1.13 97 1.5 10 0/-18

Safety and Performance

www.LED.com/Lamps – 111
 Linear Fluorescent Ballasts
49767 – GE259MAXP-N/ULTRA • T8 Instant Start Ballasts For 46-59W 4ft-8ft Slimline Lamps
• Energy-saving high-efficiency instant-start electronic ballast (>90%)
UltraMax® P-Series Instant Start • Multi-voltage technology handles voltage from 120 to 277V
• Anti-striation control for better light quality
Multi-Voltage High-Efficiency • Cold temperature 0°F Minimum Starting Temperature
2 or 1 – F96T8 120 to 277 "N" .87 BF UltraMax P ®

General Characteristics Dimensions

Ballast Type Electronic – High-Efficiency Multivolt Instant Start Length (L) 9.5 in (241 mm)
Starting Method Instant Start
Width (W) 1.3 in (33 mm)
Lamp Wiring Parallel
Height (H) 1.18 in (30 mm)
Line Voltage Regulation(+/-) 10%
Ambient Temperature (MAX) 40°C (104°F) Mounting Dimensions
Case Temperature (MAX) 70°C (158°F) Mount Length (M) 8.9 in (226 mm)
Ballast Factor Normal Mount Width (X or F) 0.87 in (22 mm)
Power Factor Correction Active
Mount Slots (MS) 0.3 in (8 mm)
Sound Rating A (20-24 decibels)
Enclosure Type Metal Weight 1.4lbs
Anti-striation control, Auto-restart, Inherently Thermally Exit Type Side
Additional Info
Protected, UL Class P
Remote Mounting Distance to Lamp (F32T8) 18ft

Electrical Characteristics Remote Mounting Wire Gauge 18 AWG

Supply Current Frequency 50 Hz/60 Hz Lead Lengths
Black 22 in (559 mm)
White 22 in (559 mm)
Blue 46 in (1168 mm)
Red 78 in (1981 mm)

Specifications and lamp wattage

# of Line Volts System Watts Nom. Line System Ballast Ballast Efficacy Power Factor
Lamp Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps (V) (W) Current (A) Factor Factor % (>=)
2 120 107 0.91 .87 .81 99 1.7 10 0/-18
2 277 105 0.4 .87 .83 98 1.7 15 0/-18
F96T8
1 120 62 0.53 .87 1.40 99 1.7 10 0/-18
1 277 62 0.24 .87 1.40 97 1.7 20 0/-18
2 120 102 0.87 .87 .85 99 1.7 10 50/10
2 277 100 0.38 .87 .87 98 1.7 15 50/10
F96T8/WM
1 120 59 0.5 .87 1.47 99 1.7 10 50/10
1 277 59 0.23 .87 1.47 97 1.7 20 50/10
2 120 85 0.78 .89 1.05 99 1.7 10 50/10
2 277 84 0.32 .89 1.06 98 1.7 15 50/10
F96T8/WMP
1 120 59 0.5 .87 1.47 99 1.7 10 50/10
1 277 59 0.23 .87 1.47 97 1.7 20 50/10
2 120 79 0.72 .89 1.13 99 1.7 10 0/-18
2 277 78 0.29 .89 1.14 98 1.7 13 0/-18
F72T8
1 120 44 0.39 .87 1.98 99 1.7 10 0/-18
1 277 44 0.17 .87 1.98 96 1.7 20 0/-18
Linear Fluorescent Ballasts

Safety and
SafetyPerformance
and performance UL Class P UL Type 1 Outdoor UL Type HL FCC – CLASS A Non-Consumer

Product is compliant with material restriction requirements of RoHS

112 – www.LED.com/Lamps
Linear Fluorescent Ballasts
63888 – GE286MAXP-HO-N • T8 Instant Start Ballasts For 44-86W 4ft-8ft HO Lamps
• High-performance electronic ballast for all general fluorescent applications
UltraMax® P-Series • Instant start electronic ballast for long lamp starting cycles and low initial cost
• Multi-voltage technology handles voltage from 120 to 277V
Multivolt High Output 120V-277V • Parallel lamp operation means system maintenance is easier to manage
2 or 1 – F96T8HO IS 120 to 277 "N" .87 BF • Anti-striation control for better light quality
• Cold temperature -22°F Minimum Starting Temperature
General Characteristics Dimensions
Ballast Type Electronic – Multivolt Instant Start Length (L) 9.5 in (241 mm)
Starting Method Instant Start Width (W) 1.7 in (43 mm)
Lamp Wiring Parallel Height (H) 1.18 in (30 mm)
Line Voltage Regulation(+/-) 10% Mounting Dimensions
Ambient Temperature (MAX) 40°C (104°F) Mount Length (M) 8.9 in (226 mm)
Case Temperature (MAX) 70°C (158°F)
Mount Width (X or F) 1.05 in (27 mm)
Ballast Factor Normal
Mount Slots (MS) 0.3 in (8 mm)
Power Factor Correction Active
Weight 1.40lbs
Sound Rating A (20-24 decibels)
Enclosure Type Metal Exit Type Side
Additional Info Auto-restart, Inherently Thermally Protected, UL Class P Remote Mounting Distance to Lamp (F32T8) 18ft
Remote Mounting Wire Gauge 18 AWG
Lead Lengths
Electrical Characteristics
Black 22 in (559 mm)
Supply Current Frequency 50 Hz/60 Hz
White 22 in (559 mm)
Blue 46 in (1168 mm)
Red 78 in (1981 mm)

Specifications and lamp wattage

# of Line Volts System Watts Nom. Line System Ballast Ballast Efficacy Power Factor
Lamp Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps (V) (W) Current (A) Factor Factor % (>=)
2 120 111 0.95 1.37 1.23 99 1.7 10 -22/-30
2 277 110 0.41 1.37 1.25 97 1.7 10 -22/-30
F96T849W
1 120 70 0.58 1.63 2.33 99 1.7 10 -22/-30
1 277 70 0.26 1.63 2.33 95 1.7 10 -22/-30
2 120 124 1.10 1.37 1.10 99 1.7 10 -22/-30
2 277 122 0.46 1.37 1.12 98 1.7 10 -22/-30
F96T8WMP
1 120 77 0.68 1.63 2.11 99 1.7 10 -22/-30
1 277 77 0.30 1.63 2.11 96 1.7 10 -22/-30
2 120 135 1.18 1.14 .85 99 1.7 10 -22/-30
2 277 133 0.50 1.15 .86 98 1.7 10 -22/-30
F96T8WM
1 120 84 0.73 1.35 1.61 99 1.7 10 -22/-30
1 277 84 0.32 1.35 1.61 96 1.7 10 -22/-30
2 120 145 1.25 .78 .54 99 1.7 10 -22/-30
2 277 142 0.54 .78 .55 98 1.7 10 -22/-30
F96T8HO
1 120 91 0.78 .91 1.01 99 1.7 10 -22/-30
1 277 90 0.35 .92 1.02 97 1.7 10 -22/-30
2 120 142 1.24 1.15 .81 99 1.7 10 -22/-30
2 277 140 0.52 1.15 .82 98 1.7 10 -22/-30
F96T8
1 120 88 0.76 1.35 1.54 99 1.7 10 -22/-30
1 277 87 0.34 1.36 1.56 97 1.7 10 -22/-30
2 120 115 1.02 .82 .71 99 1.7 10 -22/-30
2 277 114 0.43 .82 .72 97 1.7 16 -22/-30
F72T8HO
1 120 73 0.64 .95 1.30 99 1.7 10 -22/-30
1 277 72 0.28 .95 1.31 95 1.7 22 -22/-30
2 120 95 0.84 .81 .86 99 1.7 10 -22/-30
2 277 92 0.35 .81 .88 97 1.7 18 -22/-30
F60T8HO
1 120 60 0.53 .95 1.58 99 1.7 11 -22/-30
1 277 62 0.24 .95 1.53 94 1.7 23 -22/-30
2 120 78 0.68 .79 1.01 99 1.7 10 -22/-30
2 277 78 0.30 .79 1.01 96 1.7 10 -22/-30
Linear Fluorescent Ballasts
F58T8
1 120 49 0.43 .93 1.91 99 1.7 10 -22/-30
1 277 50 0.20 .93 1.87 93 1.7 10 -22/-30
2 120 78 0.70 .82 1.05 99 1.7 10 -22/-30
2 277 77 0.30 .82 1.06 96 1.7 21 -22/-30
F48T8HO
1 120 51 0.45 .95 1.87 99 1.7 13 -22/-30
1 277 51 0.20 .95 1.87 93 1.7 26 -22/-30
2 120 97 0.85 1.20 1.24 99 1.7 10 -22/-30
2 277 96 0.37 1.20 1.25 97 1.7 10 -22/-30
F40T8
1 120 62 0.52 1.39 2.24 99 1.7 10 -22/-30
1 277 62 0.24 1.37 2.21 95 1.7 10 -22/-30

Safety and
SafetyPerformance
and performance UL Class P UL Type 1 Outdoor UL Type HL FCC – CLASS A Non-Consumer

Product is compliant with material restriction requirements of RoHS

www.LED.com/Lamps – 113
 Linear Fluorescent Ballasts
74109 – GE232MAXP347-H • T8 Instant Start Ballasts
• Energy-saving high-efficiency instant-start electronic ballast (>90%)
UltraMax® P-Series • Instant start ballast for long lamp starting cycles and low initial cost
• Anti-striation control for better light quality
347V High-Efficiency • Cold temperature -22°F Minimum Starting Temperature
2 or 1 – F32T8 347V "H" 1.18 BF UltraMax P ®
• Parallel lamp operation means system maintenance is easier to manage

General Characteristics Dimensions

Ballast Type Electronic – High-Efficiency Instant Start Length (L) 9.5 in (241 mm)
Starting Method Instant Start
Width (W) 1.3 in (33 mm)
Lamp Wiring Parallel
Height (H) 1.18 in (30 mm)
Line Voltage Regulation(+/-) 10%
Ambient Temperature (MAX) 40°C (104°F) Mounting Dimensions
Case Temperature (MAX) 70°C (158°F) Mount Length (M) 8.9 in (226 mm)
Ballast Factor High Mount Width (X or F) 0.87 in (22 mm)
Power Factor Correction Active
Mount Slots (MS) 0.3 in (8 mm)
Sound Rating A (20-24 decibels)
Enclosure Type Metal Weight 1.04lbs
Anti-striation control, Auto-restart, Inherently Thermally Exit Type Side
Additional Info
Protected, UL Class P
Remote Mounting Distance to Lamp (F32T8) 18ft

Electrical Characteristics Remote Mounting Wire Gauge 18 AWG

Supply Current Frequency 60 Hz Lead Lengths
Black 25 in (635 mm)
White 25 in (635 mm)
Blue 31 in (787 mm)
Red 45 in (1143 mm)

Specifications and lamp wattage

# of Line Volts System Watts Nom. Line System Ballast Ballast Efficacy Power Factor
Lamp Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps (V) (W) Current (A) Factor Factor % (>=)
2 347 70 0.20 1.18 1.69 99 1.7 10 -22/-30
F32T8
1 347 44 0.13 1.32 3.00 99 1.7 10 -22/-30
2 347 67 0.19 1.15 1.72 99 1.7 10 60/16
F32T8/WM
1 347 42 0.12 1.29 3.07 99 1.7 10 60/16
2 347 63 0.12 1.30 2.06 99 1.7 17 60/16
F28T8
1 347 39 0.18 1.30 3.33 99 1.7 17 60/16
F32T8/25W 2 347 56 0.16 1.12 2.00 99 1.7 10 60/16
2 347 55 0.16 1.16 2.11 99 1.7 10 -22/-30
F25T8
1 347 36 0.11 1.32 3.67 99 1.7 30 -22/-30
F25T8/WM 2 347 47 0.14 1.16 2.47 98 1.7 10 60/16
2 347 37 0.11 1.10 2.97 97 1.7 12 -22/-30
F17TB
1 347 23 0.08 1.25 5.43 87 1.7 52 -22/-30
F17T8/WM 2 347 31 0.10 1.10 3.55 97 1.7 12 60/16
2 347 30 0.09 1.00 3.33 94 1.7 30 -22/-30
FE15T8
1 347 19 0.07 1.15 6.05 82 1.7 55 -22/-30
F17T8/WM 2 347 53 0.16 1.24 2.34 99 1.7 10 -22/-30
2 347 61 0.18 1.23 2.02 99 1.7 10 -22/-30
FE15T8
1 347 39 0.12 1.45 3.72 95 1.7 20 -22/-30
Linear Fluorescent Ballasts

SafetyPerformance
Safety and and performance UL Class P UL Type 1 Outdoor UL Type HL ICES-005
FCC – CLASS for EMI and RFI FCC – CLASS A Non-Consumer
A Non-Consumer

ANSI - C82.11 - Cons 2002, ANSI - C62.41 - 1991

Product is compliant with material restriction requirements of RoHS

114 – www.LED.com/Lamps
Linear Fluorescent Ballasts
74093 – GE232MAXP347-N • T8 Instant Start Ballasts For 46-59W 4ft-8ft Slimline Lamps
• Energy-saving high-efficiency instant-start electronic ballast (>90%)
UltraMax® P-Series • Instant start ballast for long lamp starting cycles and low initial cost
• Anti-striation control for better light quality
347V High-Efficiency • Cold temperature 0°F Minimum Starting Temperature
2 or 1 – F32T8 347V "N" .87 BF UltraMax P ®
• Parallel lamp operation means system maintenance is easier to manage

General Characteristics Dimensions

Ballast Type Electronic – High-Efficiency Instant Start Length (L) 9.5 in (241 mm)
Starting Method Instant Start
Width (W) 1.3 in (33 mm)
Lamp Wiring Parallel
Height (H) 1.18 in (30 mm)
Line Voltage Regulation(+/-) 10%
Ambient Temperature (MAX) 40°C (104°F) Mounting Dimensions
Case Temperature (MAX) 70°C (158°F) Mount Length (M) 8.9 in (226 mm)
Ballast Factor Normal Mount Width (X or F) 0.87 in (22 mm)
Power Factor Correction Active
Mount Slots (MS) 0.3 in (8 mm)
Sound Rating A (20-24 decibels)
Enclosure Type Metal Weight 1.04lbs
Anti-striation control, Auto-restart, Inherently Thermally Exit Type Side
Additional Info
Protected, UL Class P
Remote Mounting Distance to Lamp (F32T8) 18ft

Electrical Characteristics Remote Mounting Wire Gauge 18 AWG

Supply Current Frequency 60 Hz Lead Lengths
Black 25 in (635 mm)
White 25 in (635 mm)
Blue 31 in (787 mm)
Red 45 in (1143 mm)

Specifications and lamp wattage

# of Line Volts System Watts Nom. Line System Ballast Ballast Efficacy Power Factor
Lamp Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps (V) (W) Current (A) Factor Factor % (>=)
2 347 53 0.15 0.87 1.65 99 1.7 10 -22/-30
F32T8
1 347 34 0.10 1.02 3.03 97 1.7 10 -22/-30
2 347 50 0.15 0.86 1.72 99 1.7 10 60/16
F32T8/WM
1 347 32 0.09 1.02 3.20 97 1.7 10 60/16
2 347 46 0.14 0.84 1.81 99 1.7 10 60/16
F28T8
1 347 30 0.09 1.01 3.38 97 1.7 10 60/16
F32T8/25W 2 347 42 0.12 0.84 2.00 99 1.7 10 60/16
2 347 41 0.12 0.88 2.12 98 1.7 10 -22/-30
F25T8
1 347 26 0.08 1.03 3.89 90 1.7 25 -22/-30
F25T8/WM 2 347 35 0.11 0.88 2.51 98 1.7 10 60/16
2 347 30 0.09 0.83 2.78 96 1.7 10 -22/-30
F17TB
1 347 20 0.07 0.98 5.00 80 1.7 50 -22/-30
F17T8/WM 2 347 25 0.08 0.83 3.32 97 1.7 10 60/16
2 347 24 0.08 0.76 3.19 88 1.7 32 -22/-30
FE15T8
1 347 16 0.06 0.88 5.52 77 1.7 69 -22/-30
2 347 44 0.13 0.89 2.03 98 1.7 10 -22/-30
F25T12
1 347 29 0.09 1.08 3.76 96 1.7 10 -22/-30

Linear Fluorescent Ballasts

Safety and performance UL Class P UL Type 1 Outdoor UL Type HL ICES-005

FCC – CLASS for EMI and RFI FCC – CLASS A Non-Consumer
A Non-Consumer
Safety and Performance
ANSI - C82.11Product
- Cons is2002, ANSIwith
compliant - C62.41 - 1991
material restriction requirements of RoHS

www.LED.com/Lamps – 115
 Linear Fluorescent Ballasts
74096 – GE232MAXP347-L • T8 Instant Start Ballasts
• Energy-saving high-efficiency instant-start electronic ballast (>90%)
UltraMax® P-Series • Instant start ballast for long lamp starting cycles and low initial cost
• Anti-striation control for better light quality
347V High-Efficiency • Cold temperature -22°F Minimum Starting Temperature
2 or 1 – F32T8 347V "L" .87 BF UltraMax P ®
• Parallel lamp operation means system maintenance is easier to manage

General Characteristics Dimensions

Ballast Type Electronic – High-Efficiency Instant Start Length (L) 9.5 in (241 mm)
Starting Method Instant Start
Width (W) 1.3 in (33 mm)
Lamp Wiring Parallel
Height (H) 1.18 in (30 mm)
Line Voltage Regulation(+/-) 10%
Ambient Temperature (MAX) 40°C (104°F) Mounting Dimensions
Case Temperature (MAX) 70°C (158°F) Mount Length (M) 8.9 in (226 mm)
Ballast Factor Low Mount Width (X or F) 0.87 in (22 mm)
Power Factor Correction Active
Mount Slots (MS) 0.3 in (8 mm)
Sound Rating A (20-24 decibels)
Enclosure Type Metal Weight 1.04lbs
Anti-striation control, Auto-restart, Inherently Thermally Exit Type Side
Additional Info
Protected, UL Class P
Remote Mounting Distance to Lamp (F32T8) 18ft

Electrical Characteristics Remote Mounting Wire Gauge 18 AWG

Supply Current Frequency 60 Hz Lead Lengths
Black 25 in (635 mm)
White 25 in (635 mm)
Blue 31 in (787 mm)
Red 45 in (1143 mm)

Specifications and lamp wattage

# of Line Volts System Watts Nom. Line System Ballast Ballast Efficacy Power Factor
Lamp Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps (V) (W) Current (A) Factor Factor % (>=)
2 347 48 0.14 0.77 1.60 99 1.7 10 -22/-30
F32T8
1 347 30 0.10 0.90 3.00 87 1.7 37 -22/-30
2 347 45 0.13 0.77 1.71 99 1.7 10 60/16
F32T8/WM
1 347 29 0.10 0.89 3.07 86 1.7 40 60/16
2 347 42 0.12 0.74 1.76 99 1.7 10 60/16
F28T8
1 347 27 0.09 0.87 3.22 83 1.7 41 60/16
F32T8/25W 2 347 37 0.12 0.74 2.00 98 1.7 10 60/16
2 347 37 0.11 0.78 2.11 97 1.7 15 -22/-30
F25T8
1 347 24 0.09 0.91 3.79 77 1.7 50 -22/-30
F25T8/WM 2 347 31 0.10 0.78 2.52 97 1.7 15 60/16
2 347 27 0.09 0.70 2.59 84 1.7 50 -22/-30
F17TB
1 347 18 0.08 0.86 4.78 68 1.7 53 -22/-30
F17T8/WM 2 347 23 0.08 0.74 3.22 84 1.7 50 60/16
2 347 22 0.08 0.67 3.05 79 1.7 54 -22/-30
FE15T8
1 347 15 0.06 0.77 5.13 66 1.7 56 -22/-30
2 347 39 0.11 0.77 1.97 98 1.7 10 -22/-30
F25T12
1 347 25 0.09 0.91 3.64 80 1.7 42 -22/-30
Linear Fluorescent Ballasts

Safety and performance UL Class P UL Type 1 Outdoor UL Type HL ICES-005

FCC – CLASS for EMI and RFI FCC – CLASS A Non-Consumer
A Non-Consumer
Safety and Performance
ANSI - C82.11Product
- Consis2002, ANSIwith
compliant - C62.41 - 1991
material restriction requirements of RoHS

116 – www.LED.com/Lamps
Linear Fluorescent Ballasts
72275 – GE232MAX-G-N (Replaces GE-232-MV-N) • For F17 (2ft), F25 (3ft), F32 (4ft), F40 (5ft) Lamps
• High-performance electronic ballast for all general fluorescent applications
UltraMax® G-Series Instant Start • Instant start electronic ballast for long lamp starting cycles and low initial cost
• Multi-voltage technology handles voltage from 120 to 277V
Multivolt 120V-277V • Parallel lamp operation means system maintenance is easier to manage
2 or 1 – F32T8 120 to 277 "N" .87 BF Multivolt UltraMax G ®
• Anti-striation control for better light quality
• Cold temperature -22°F Minimum Starting Temperature

General Characteristics Dimensions

Ballast Type Electronic – Multivolt Instant Start Length (L) 9.5 in (241 mm)
Starting Method Instant Start
Width (W) 1.3 in (33 mm)
Lamp Wiring Parallel
Height (H) 1.18 in (30 mm)
Line Voltage Regulation(+/-) 10%
Ambient Temperature (MAX) 40°C (104°F) Mounting Dimensions
Case Temperature (MAX) 70°C (158°F) Mount Length (M) 8.9 in (226 mm)
Ballast Factor Normal Mount Width (X or F) 0.87 in (22 mm)
Power Factor Correction Active
Mount Slots (MS) 0.3 in (8 mm)
Sound Rating A (20-24 decibels)
Enclosure Type Metal Weight 1.06lbs
Anti-striation control, Auto-restart, Inherently Thermally Exit Type Side
Additional Info
Protected, UL Class P
Remote Mounting Distance to Lamp (F32T8) 18ft

Electrical Characteristics Remote Mounting Wire Gauge 18 AWG

Supply Current Frequency 50 Hz/60 Hz Lead Lengths
Black 25 in (635 mm)
White 25 in (635 mm)
Blue 31 in (787 mm)
Red 45 in (1143 mm)

Specifications and lamp wattage

# of Line Volts System Watts Nom. Line System Ballast Ballast Efficacy Power Factor
Lamp Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps (V) (W) Current (A) Factor Factor % (>=)
2 120 57 0.48 .88 1.54 99 1.7 10 -22/-30
2 277 55 0.2 .88 1.60 98 1.7 10 -22/-30
F32T8
1 120 35 0.3 1.08 3.09 99 1.7 10 -22/-30
1 277 35 0.13 1.08 3.09 97 1.7 10 -22/-30
2 120 53 0.44 .86 1.62 99 1.7 10 60/16
2 277 51 0.19 .87 1.71 97 1.7 10 60/16
F32T8/WM
1 120 33 0.28 1.05 3.18 99 1.7 10 60/16
1 277 33 0.12 1.05 3.18 96 1.7 10 60/16
2 120 47 0.39 .83 1.77 99 1.7 10 60/16
2 277 47 0.17 .83 1.77 97 1.7 10 60/16
F28T8
1 120 31 0.26 1.02 3.29 99 1.7 10 60/16
1 277 31 0.11 .02 .06 95 1.7 10 60/16
2 120 43 0.36 .83 1.93 99 1.7 10 60/16
2 277 43 0.16 .83 1.93 97 1.7 10 60/16
F32T8/25W
1 120 28 0.24 1.02 3.64 99 1.7 10 60/16
1 277 28 0.10 1.02 3.64 98 1.7 10 60/16
2 120 44 0.37 .90 2.05 99 1.7 10 -22/-30
2 277 44 0.16 .91 2.07 97 1.7 10 -22/-30
F25T8
1 120 28 0.23 1.08 3.86 99 1.7 10 -22/-30
1 277 28 0.11 1.08 3.86 95 1.7 10 -22/-30
2 120 31 0.26 .88 2.84 99 1.7 10 -22/-30
2 277 31 0.12 .88 2.84 95 1.7 10 -22/-30
F17T8
1 120 20 0.17 1.05 5.25 99 1.7 10 -22/-30
1 277 21 0.08 1.05 5.00 92 1.7 14 -22/-30
1 120 44 0.37 1.08 2.45 99 1.7 10 0/-18
F40T8
1 277 43 0.16 1.08 2.51 96 1.7 10 0/-18
Linear Fluorescent Ballasts

Safety and
SafetyPerformance
and performance UL Class P UL Type 1 Outdoor UL Type HL FCC – CLASS A Non-Consumer

Product is compliant with material restriction requirements of RoHS

www.LED.com/Lamps – 117
 Linear Fluorescent Ballasts
74463 – GE432MAX-G-N (Replaces GE432MV-N) • For F17 (2ft), F25 (3ft), F32 (4ft), F40 (5ft) Lamps
• High-performance electronic ballast for all general fluorescent applications
UltraMax® G-Series T8 • Instant start electronic ballast for long lamp starting cycles and low initial cost
• Multi-voltage technology handles voltage from 120 to 277V
Multivolt 120V-277V • Parallel lamp operation means system maintenance is easier to manage
4 or 3 – F32T8 120 to 277 "N" .87 BF Multivolt UltraMax G ®
• Anti-striation control for better light quality
• Cold temperature -22°F Minimum Starting Temperature

General Characteristics Dimensions

Ballast Type Electronic – Multivolt Instant Start Length (L) 9.5 in (241 mm)
Starting Method Instant Start
Width (W) 1.3 in (33 mm)
Lamp Wiring Parallel
Height (H) 1.18 in (30 mm)
Line Voltage Regulation(+/-) 10%
Ambient Temperature (MAX) 40°C (104°F) Mounting Dimensions
Case Temperature (MAX) 70°C (158°F) Mount Length (M) 8.9 in (226 mm)
Ballast Factor Normal Mount Width (X or F) 0.87 in (22 mm)
Power Factor Correction Active
Mount Slots (MS) 0.3 in (8 mm)
Sound Rating A (20-24 decibels)
Enclosure Type Metal Weight 1.40lbs
Anti-striation control, Auto-restart, Inherently Thermally Exit Type Side
Additional Info
Protected, UL Class P
Remote Mounting Distance to Lamp (F32T8) 18ft

Electrical Characteristics Remote Mounting Wire Gauge 18 AWG

Supply Current Frequency 50 Hz/60 Hz Lead Lengths
Black 25 in (635 mm)
White 25 in (635 mm)
Red & Blue 31 in (787 mm)
Yellow 47 in (1194 mm)

Specifications and lamp wattage

# of Line Volts System Watts Nom. Line System Ballast Ballast Efficacy Power Factor
Lamp Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps (V) (W) Current (A) Factor Factor % (>=)
4 120 113 0.99 .88 .78 99 1.7 10 -22/-30
4 277 110 0.43 .88 .80 98 1.7 10 -22/-30
F32T8
3 120 93 0.83 .93 1.00 99 1.7 10 -22/-30
3 277 92 0.36 .93 1.01 98 1.7 10 -22/-30
4 120 103 0.90 .83 .81 99 1.7 10 60/16
4 277 103 0.40 .83 .81 98 1.7 10 60/16
F32T8/WM
3 120 87 0.77 .91 1.05 99 1.7 10 60/16
3 277 86 0.33 .91 1.06 98 1.7 10 60/16
4 120 93 0.83 .82 .88 99 1.7 10 60/16
4 277 92 0.36 .82 .89 98 1.7 10 60/16
F28T8
3 120 77 0.68 .85 1.10 99 1.7 10 60/16
3 277 77 0.30 .85 1.10 98 1.7 10 60/16
4 120 88 0.74 .80 .91 99 1.7 10 60/16
4 277 87 0.32 .80 .92 98 1.7 15 60/16
F32T8/25W
3 120 73 0.61 .85 1.16 99 1.7 10 60/16
3 277 73 0.27 .85 1.16 97 1.7 16 60/16
4 120 88 0.77 .87 .99 99 1.7 10 -22/-30
4 277 86 0.34 .87 1.01 98 1.7 10 -22/-30
F25T8
3 120 73 0.64 .93 1.27 99 1.7 10 -22/-30
3 277 72 0.28 .93 1.29 98 1.7 10 -22/-30
4 120 60 0.53 .87 1.45 99 1.7 10 -22/-30
4 277 60 0.23 .87 1.45 97 1.7 10 -22/-30
F17T8
3 120 51 0.45 .91 1.78 99 1.7 10 -22/-30
3 277 51 0.20 .91 1.78 97 1.7 10 -22/-30
3 120 112 0.99 99 1.7 10 0/-18
F40T8
3 277 110 0.43 98 1.7 10 0/-18
Linear Fluorescent Ballasts

Safety and
SafetyPerformance
and performance UL Class P UL Type 1 Outdoor UL Type HL FCC – CLASS A Non-Consumer

Product is compliant with material restriction requirements of RoHS

118 – www.LED.com/Lamps
Linear Fluorescent Ballasts
74103 – GE232MAX-G-347 (Replaces GE232-N-347) • T8 Instant Start Ballasts
• High-performance electronic ballast for all general fluorescent applications
UltraMax® G-Series • Instant start ballast for long lamp starting cycles and low initial cost
• Light-weight, Slim Profile Mini Can Housing
347V Instant Start High-Efficiency • Parallel lamp operation means system maintenance is easier to manage
2 or 1 – F32T8 347V "N" .87 BF UltraMax G ®
• Cold temperature 0°F Minimum Starting Temperature

General Characteristics Dimensions

Ballast Type Electronic – High-Efficiency Instant Start Length (L) 9.5 in (241 mm)
Starting Method Instant Start
Width (W) 1.3 in (33 mm)
Lamp Wiring Parallel
Height (H) 1.18 in (30 mm)
Line Voltage Regulation(+/-) 10%
Ambient Temperature (MAX) 40°C (104°F) Mounting Dimensions
Case Temperature (MAX) 70°C (158°F) Mount Length (M) 8.9 in (226 mm)
Ballast Factor Normal Mount Width (X or F) 0.87 in (22 mm)
Power Factor Correction Active
Mount Slots (MS) 0.3 in (8 mm)
Sound Rating A (20-24 decibels)
Enclosure Type Metal Weight 1.15lbs

Additional Info Auto-restart, Inherently Thermally Protected, UL Class P Exit Type Side
Remote Mounting Distance to Lamp (F32T8) 18ft

Electrical Characteristics Remote Mounting Wire Gauge 18 AWG

Supply Current Frequency 60 Hz Lead Lengths
Black 25 in (635 mm)
White 25 in (635 mm)
Blue 31 in (787 mm)
Red 45 in (1143 mm)

Specifications and lamp wattage

# of Line Volts System Watts Nom. Line System Ballast Ballast Efficacy Power Factor
Lamp Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps (V) (W) Current (A) Factor Factor % (>=)
2 347 55 0.16 0.87 1.58 99 1.7 10 0/-18
F32T8
1 347 34 0.11 1.03 3.03 97 1.7 10 0/-18
2 347 52 0.15 0.85 1.63 99 1.7 10 60/16
F32T8/WM
1 347 32 0.09 1.01 3.16 97 1.7 10 60/16
2 347 48 0.14 0.84 1.75 99 1.7 10 60/16
F28T8
1 347 30 0.09 1.00 3.33 96 1.7 10 60/16
F32T8/25W 2 347 44 0.13 0.84 1.91 99 1.7 10 60/16
2 347 41 0.12 0.88 2.15 98 1.7 10 0/-18
F25T8
1 347 26 0.08 1.04 4.00 95 1.7 11 0/-18
F25T8/WM 2 347 35 0.11 0.88 2.51 98 1.7 10 60/16
2 347 29 0.09 0.83 2.86 96 1.7 10 0/-18
F17T8
1 347 19 0.07 0.99 5.21 84 1.7 50 0/-18
F17T8/WM 2 347 24 0.08 0.83 3.46 96 1.7 10 60/16
2 347 24 0.08 0.76 3.17 90 1.7 30 0/-18
FE15T8
1 347 16 0.06 0.89 5.56 78 1.7 66 0/-18
2 347 44 0.13 0.88 2.00 98 1.7 10 0/-18
F25T12
1 347 28 0.08 1.07 3.82 96 1.7 10 0/-18

Linear Fluorescent Ballasts

SafetyPerformance
Safety and and performance UL Class P UL Type 1 Outdoor UL Type HL ICES-005
FCC – CLASS for EMI and RFI FCC – CLASS A Non-Consumer
A Non-Consumer

ANSI - C82.11Product
- Consis2002, ANSIwith
compliant - C62.41 - 1991
material restriction requirements of RoHS

www.LED.com/Lamps – 119
 Linear Fluorescent Ballasts
74107 – GE432MAX-G-347 (Replaces GE432-N-347) • T8 Instant Start Ballasts
• High-performance electronic ballast for all general fluorescent applications
UltraMax® G-Series • Instant start ballast for long lamp starting cycles and low initial cost
• Light-weight, Slim Profile Mini Can Housing
347V Instant Start High-Efficiency • Parallel lamp operation means system maintenance is easier to manage
4 or 3 – F32T8 347V "N" .87 BF UltraMax G ®
• Cold temperature 0°F Minimum Starting Temperature

General Characteristics Dimensions

Ballast Type Electronic – High-Efficiency Instant Start Length (L) 9.5 in (241 mm)
Starting Method Instant Start
Width (W) 1.3 in (33 mm)
Lamp Wiring Parallel
Height (H) 1.18 in (30 mm)
Line Voltage Regulation(+/-) 10%
Ambient Temperature (MAX) 40°C (104°F) Mounting Dimensions
Case Temperature (MAX) 70°C (158°F) Mount Length (M) 8.9 in (226 mm)
Ballast Factor Normal Mount Width (X or F) 0.87 in (22 mm)
Power Factor Correction Active
Mount Slots (MS) 0.3 in (8 mm)
Sound Rating A (20-24 decibels)
Enclosure Type Metal Weight 1.15lbs

Additional Info Auto-restart, Inherently Thermally Protected, UL Class P Exit Type Side
Remote Mounting Distance to Lamp (F32T8) 18ft

Electrical Characteristics Remote Mounting Wire Gauge 18 AWG

Supply Current Frequency 60 Hz Lead Lengths
Black 25 in (635 mm)
White 25 in (635 mm)
Blue 31 in (787 mm)
Red 47 in (1194 mm)

Specifications and lamp wattage

# of Line Volts System Watts Nom. Line System Ballast Ballast Efficacy Power Factor
Lamp Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps (V) (W) Current (A) Factor Factor % (>=)
4 347 109 0.30 0.88 .81 99 1.7 10 0/-18
F32T8
3 347 87 0.25 0.95 1.09 99 1.7 10 0/-18
4 347 103 0.29 0.86 .83 99 1.7 10 60/16
F32T8/WM
3 347 83 0.24 0.94 1.13 99 1.7 10 60/16
4 347 96 0.27 0.84 .88 99 1.7 10 60/16
F28T8
3 347 76 0.22 0.92 1.21 99 1.7 10 60/16
F32T8/25W 4 347 87 0.25 0.84 .97 99 1.7 10 60/16
4 347 83 0.24 0.88 1.06 99 1.7 10 0/-18
F25T8
3 347 68 0.20 0.96 1.41 99 1.7 11 0/-18
F25T8/WM 4 347 71 0.20 0.88 1.24 99 1.7 10 60/16
4 347 52 0.17 0.84 1.62 99 1.7 10 0/-18
F17T8
3 347 48 0.14 0.91 1.90 98 1.7 50 0/-18
F17T8/WM 4 347 44 0.13 0.84 1.91 99 1.7 10 60/16
4 347 47 0.14 0.76 1.62 98 1.7 30 0/-18
FE15T8
3 347 38 0.12 0.82 2.16 91 1.7 66 0/-18
4 347 87 0.25 0.89 1.02 99 1.7 10 0/-18
F25T12
3 347 72 0.21 0.97 1.35 99 1.7 10 0/-18
Linear Fluorescent Ballasts

SafetyPerformance
Safety and and performance UL Class P UL Type 1 Outdoor UL Type HL ICES-005
FCC – CLASS for EMI and RFI FCC – CLASS A Non-Consumer
A Non-Consumer

ANSI - C82.11Product
- Consis2002, ANSIwith
compliant - C62.41 - 1991
material restriction requirements of RoHS

120 – www.LED.com/Lamps
Linear Fluorescent Ballasts
96714 – GE232-MVPS-N • For F17 (2ft), F25 (3ft), F32 (4ft) Lamps
• < 10% THD, > 99% power factor
UltraStart® T8 • A new generation of ultra-efficient Programmed Start ballasts (> 90% efficiency)
• Anti-striation circuitry reduces striations with energy saving lamps
Programmed Start • Extends lamp life in frequently switched applications (> 100,000 on/off cycles)
2 or 1 – F32T8 120 to 277 Normal Light .88 BF <10% THD UltraStart® • Multi-voltage technology handles voltage from 120 to 277V
• Light-weight, Slim Profile Mini Can Housing

General Characteristics Dimensions

Ballast Type Electronic – Programmed/ Rapid Start Length (L) 9.5 in (241 mm)
Starting Method Programmed Start
Width (W) 1.3 in (33 mm)
Lamp Wiring Parallel
Height (H) 1.18 in (30 mm)
Line Voltage Regulation(+/-) 10%
Ambient Temperature (MAX) 104°C (40°F) Mounting Dimensions
Case Temperature (MAX) 70°C (158°F) Mount Length (M) 8.9 in (226 mm)
Ballast Factor Normal Mount Width (X or F) 1.18 in (30 mm)
Power Factor Correction Active
Mount Slots (MS) 0.3 in (8 mm)
Sound Rating A (20-24 decibels)
Anti-striation control, Inherently Thermally Protected, UL Weight 1.65lbs
Additional Info
Class P, Universal voltage Exit Type Side
Remote Mounting Distance to Lamp (F32T8) 18ft

Electrical Characteristics Remote Mounting Wire Gauge 18 AWG

Supply Current Frequency 50 Hz/Supply Current Frequency (MIN)/ 50 Hz/ 60 (MIN) Lead Lengths Lengths (± 1 in)
Supply Current Frequency (MIN) 50 Hz/60 Hz Black 25 in (635 mm)
Blue & Red 33 in (838 mm)
White 25 in (635 mm)
Yellow 47 in (1194 mm)

Specifications and lamp wattage

# of Line Volts System Watts Nom. Line System Ballast Ballast Efficacy Power Factor
Lamp Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps (V) (W) Current (A) Factor Factor % (>=)
2 120 59 0.48A 0.89 1.50 99 1.7 10 0/-18
2 277 58 0.21A 0.89 1.53 96 1.7 10 0/-18
F96T8
1 120 37 0.30A 1.05 2.83 98 1.7 10 0/-18
1 277 37 0.14A 1.05 2.83 93 1.7 10 0/-18
2 120 55 0.45A 0.88 1.60 99 1.7 10 50/10
2 277 54 0.20A 0.88 1.62 96 1.7 10 50/10
F96T8/WM
1 120 34 0.28A 1.02 3.00 98 1.7 10 50/10
1 277 34 0.13A 1.02 3.00 93 1.7 10 50/10
2 120 51 0.42A 0.86 1.68 99 1.7 10 50/10
2 277 50 0.18A 0.86 1.72 95 1.7 10 50/10
F96T8/WMP
1 120 32 0.26A 1.00 3.12 98 1.7 10 50/10
1 277 32 0.12A 1.00 3.12 92 1.7 10 50/10

Linear Fluorescent Ballasts

Safety and Performance UL Listed UL Class P ANSI – C62.41 UL Type 1 Outdoor UL Type HL FCC – CLASS A Non-Consumer

Product is compliant with material restriction requirements of RoHS

www.LED.com/Lamps – 121
 Linear Fluorescent Ballasts
68993 – GE228MVPS-MC • For F14 (2ft), F21 (3ft), F28 (4ft), F35 (5ft) HE T5 Lamps*
(replaces 99655)
• High Efficiency T5 ballast with Continuous Cathode Cutout Technology
UltraStart® Programmed Start • Lower Maintenance Costs with Parallel Lamp Operation
• Fast Starting Time <700ms
T5 High-Efficiency • Multi-Voltage technology means a single ballast handles voltage from 108V to 305V
2 or 1 – F14-F28T5HE, 120 – 277 UltraStart PRS Normal Light - .95 BF A Can • Auto-Restart withstands temporary losses in power without the need to cycle power
®

General Characteristics Dimensions

Ballast Type Electronic – Programmed / Rapid Start Length (L) 9.5 in (241 mm)
Starting Method Programmed Start
Width (W) 1.3 in (33 mm)
Lamp Wiring Parallel
Height (H) 1.0 in (25.4 mm)
Line Voltage Regulation(+/-) 10%
Ambient Temperature (MAX) 131°F (55°C) Mounting Dimensions
Case Temperature (MAX) 70°C (158°F) Mount Length (M) 8.9 in (226 mm)
Ballast Factor Normal Mount Slots (MS) 0.3 in (8 mm)
Power Factor Correction Active
Weight 1.0lbs
Sound Rating A (20-24 decibels)
Exit Type Side
Auto-restart, End-of-Life Protection (EOL), Thermally protected,
Additional Info
Universal voltage, Anti-striation control Remote Mounting Distance to Lamp 8ft
Remote Mounting Wire Gauge 18 AWG

Electrical Characteristics Lead Lengths Length (± 1 in)

Supply Current Frequency 50 Hz/60 Hz White & Black 20 in (508 mm)
Blue & Red 26 in (660 mm)
Yellow 37 in (940 mm)

Specifications and lamp wattage

# of Line Volts System Watts Nom. Line System Ballast Ballast Efficacy Power Factor Crest Factor THD%
Lamp Min Starting Temp (°F/°C)
Lamps (V) (W) Current (A) Factor Factor % (>=) (<=) (<=)
2 277 60 0.22 .96 1.60 99 1.4 6 0/-18
1 277 41 0.16 1.21 2.95 97 1.4 9 0/-18
F28T5HE
2 120 62 0.53 .96 1.55 99 1.4 7 0/-18
1 120 41 0.35 1.21 2.95 99 1.4 8 0/-18
2 277 60 0.23 .96 1.60 98 1.4 6 32/0
1 277 41 0.15 1.21 2.95 97 1.4 10 32/0
F28T5HL
2 120 62 0.52 .96 1.55 99 1.4 7 32/0
1 120 41 0.35 1.21 2.95 99 1.4 8 32/0
2 277 58 0.22 .98 1.69 98 1.4 6 32/0
F28T5WM
2 120 59 0.50 .98 1.66 99 1.4 7 32/0
2 277 50 0.18 1.04 2.08 98 1.4 7 32/0
F21T5HE
2 120 51 0.43 1.04 2.04 99 1.4 8 32/0
2 277 37 0.14 1.10 2.97 97 1.4 10 32/0
F14T5HE
2 120 37 0.32 1.10 2.97 99 1.4 9 32/0
2 277 36 0.13 1.10 3.06 97 1.4 11 32/0
F14T5WM
2 120 36 0.30 1.10 3.06 99 1.4 9 32/0
Linear Fluorescent Ballasts

Safety and Performance

UL Type CC UL Type 1 Outdoor UL Listed UL Type
UL Type HL
Product is compliant with material restriction requirements of RoHS Product
FCCCC– CLASS AUL
is compliant
Meets ANSI Standardwith
Type 1 Outdoor
Non-Consumer
material
C82.11- restriction
cons 2002
ULClass
UL Listed UL TypeMeets
P cUL Listed HL FCCANSI– Standard
CLASS A Non-Consumer
C62.41-1991 UL Class P
requirements of RoHS Meets ANSI Standard C82.11- cons 2002 No PCB’s
No PCB’s
cUL Listed Meets ANSI Standard C62.41-1991

122 – www.LED.com/Lamps
Linear Fluorescent Ballasts
67562 – GE254MVPS90-A • For T5 HO Lamps*
• High Efficiency T5 ballast with Continuous Cathode Cutout Technology
UltraStart® Programmed Start • Lower Maintenance Costs with Parallel Lamp Operation
• Fast Starting Time <700ms
T5 High Output • Multi-Voltage technology means a single ballast handles voltage from 108V to 305V
2 or 1 – F54T5HO 120 to 277V UltraStart PRS High Temp A Can ®
• Auto-Restart withstands temporary losses in power without the need to cycle power

General Characteristics Dimensions

Ballast Type Electronic – Programmed / Rapid Start Length (L) 9.5 in (241 mm)
Starting Method Programmed Start
Width (W) 1.7 in (43.2 mm)
Lamp Wiring Parallel
Height (H) 1.2 in (30.5 mm)
Line Voltage Regulation(+/-) 10%
Ambient Temperature (MAX) 131°F (55°C) Mounting Dimensions
Case Temperature (MAX) 90°C (194°F) Mount Length (M) 8.9 in (226 mm)
Ballast Factor Normal Mount Slots (MS) 0.25 in (6 mm)
Power Factor Correction Active
Weight 1.50lbs
Sound Rating A (20-24 decibels)
Exit Type Side
Auto-restart, End-of-Life Protection (EOL), Thermally protected,
Additional Info
Universal voltage, Anti-striation control Remote Mounting Distance to Lamp 12ft
Remote Mounting Wire Gauge 18 AWG

Electrical Characteristics Lead Lengths Length (± 1 in)

Supply Current Frequency 50 Hz/60 Hz White & Black 25 in (635 mm)
Blue & Red 34 in (864 mm)
Yellow 45 in (1143 mm)

Specifications and lamp wattage

# of Line Volts System Watts Nom. Line System Ballast Ballast Efficacy Power Factor
Lamp Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps (V) (W) Current (A) Factor Factor % (>=)
2 120 117 0.98 1.00 .85 1.00 1.4 4.4 -20/-29
2 277 114 0.41 1.10 .96 99 1.4 5.4 -20/-29
F54T5HO
1 120 63 0.53 1.00 1.59 1.00 1.4 6.4 -20/-29
1 277 62 0.23 1.10 1.77 97 1.4 6.6 -20/-29
2 120 109 0.90 1.00 .92 1.00 1.4 4.6 0/-18
2 277 107 0.40 1.12 1.05 99 1.4 5.2 0/-18
F54T5WM
1 120 61 0.51 1.00 1.64 1.00 1.4 6.7 0/-18
1 277 60 0.22 1.12 1.87 97 1.4 7.7 0/-18
2 120 105 0.88 1.00 .95 1.00 1.4 4.8 -20/-29
2 277 104 0.40 1.10 1.06 99 1.4 5.3 -20/-29
F54T5/47W
1 120 58 0.48 1.00 1.72 1.00 1.4 6.9 -20/-29
1 277 57 0.22 1.10 1.93 96 1.4 8.0 -20/-29
2 120 110 0.90 .95 .86 1.00 1.4 4.7 -20/-29
2 277 107 0.39 .95 .89 99 1.4 5.4 -20/-29
F58T8
1 120 59 0.49 1.08 1.83 1.00 1.4 6.6 -20/-29
1 277 59 0.22 1.08 1.83 96 1.4 7.3 -20/-29
2 120 116 0.97 .86 .74 1.00 1.4 4.9 0/-18
2 277 112 0.41 .86 .77 99 1.4 5.4 0/-18
FT55W/4P
1 120 61 0.51 1.03 1.69 1.00 1.4 6.8 0/-18
1 277 60 0.23 1.03 1.72 97 1.4 8.0 0/-18
2 120 118 1.00 1.05 .89 1.00 1.4 4.6 0/-18
2 277 116 0.43 1.06 .91 99 1.4 5.2 0/-18
FT50W/4P
1 120 64 0.53 1.18 1.84 1.00 1.4 6.6 0/-18
1 277 63 0.24 1.18 1.87 97 1.4 7.4 0/-18

Linear Fluorescent Ballasts

UL Type 1 Outdoor UL Type CC UL Listed Meets ANSI Standard C62.41-1991 UL Class P Meets ANSI Standard C82.11- cons 2002

Safety and Performance UL Type 1 Outdoor UL Type

FCC – CLASS A Non-Consumer Product
FCCCC– CLASS UL Listed Meets ANSI
A Non-Consumer
HighisTemperature
compliant with material
Rated:
Standard
Product C62.41-1991
is compliant
restriction
Suitable
UL restriction
with material
for highrequirements
temperature of RoHS
Class P Meets
applications
ANSI Standard
requirements of RoHSC82.11- cons 2002
80°C max case temp 5 yr warranty.
High Temperature Rated: Suitable for high temperature applications 80°C max case temp 5 yr warranty.

www.LED.com/Lamps – 123
 Linear Fluorescent Ballasts
67566 – GE454MVPS90-F (replaces 77114)
• For T5 HO Lamps*
• High Efficiency T5 ballast with Continuous Cathode Cutout Technology
UltraStart® Programmed Start • Lower Maintenance Costs with Parallel Lamp Operation
• Fast Starting Time <700ms
T5 High Output • Multi-Voltage technology means a single ballast handles voltage from 108V to 305V
4-1 – F54T5HO 120 to 277V UltraStart PS F Can ®
• Auto-Restart withstands temporary losses in power without the need to cycle power
• Anti-Striation Control for better light quality, with no striations
• 90°C case rating/UL Approved 55C Ambient Rating
• Individual lamp End of Lamp Life protection - only one lamp shuts down at end of life
• Cold temperature -20°F Minimum Starting Temperature

General Characteristics Dimensions

Ballast Type Electronic – Programmed / Rapid Start Length (L) 11.75 in (298 mm)
Starting Method Programmed Start Width (W) 1.7 in (43.2 mm)
Lamp Wiring Parallel
Height (H) 1.2 in (30.5 mm)
Line Voltage Regulation(+/-) 10%
Mounting Dimensions
Ambient Temperature (MAX) 55°C (131°F)
Mount Length (M) 16.7 in (424 mm)
Case Temperature (MAX) 90°C (194°F)
Ballast Factor Normal Weight 2.79lbs
Power Factor Correction Active Exit Type Side
Sound Rating A (20-24 decibels) Remote Mounting Distance to Lamp 8ft
Enclosure Type Metal Remote Mounting Wire Gauge 18 AWG
Additional Info Auto-restart, End-of-Life Protection (EOL), Thermally protected
Lead Lengths Length (± 1 in)
Black 25 in (635 mm)
Electrical Characteristics
Supply Current Frequency 50 Hz/60 Hz White 25 in (635 mm)

Specifications and lamp wattage

# of Line Volts System Watts Nom. Line System Ballast Ballast Efficacy Power Factor
Lamp Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps (V) (W) Current (A) Factor Factor % (>=)
4 120 206 1.73 .86 .42 99 1.4 5 0/-18
4 277 203 0.75 .86 .42 97 1.4 8 0/-18
3 120 168 1.41 .91 .54 99 7.0 6 0/-18
3 277 168 0.63 .91 .54 97 1.4 10 0/-18
FT55W/4P
2 120 125 1.04 99 1.4 7 0/-18
2 277 124 0.48 94 1.4 16 0/-18
1 120 64 0.54 99 1.4 10 0/-18
1 277 66 0.28 84 1.4 25 0/-18
4 120 222 1.86 1.06 .48 99 1.4 5 0/-18
4 277 218 0.81 1.06 .49 98 1.4 8 0/-18
3 120 187 1.56 1.11 .59 99 1.4 6 0/-18
3 277 184 0.68 1.11 .60 97 1.4 9 0/-18
FT50W/4P
2 120 130 1.09 99 1.4 7 0/-18
2 277 130 0.50 95 1.4 15 0/-18
1 120 72 0.60 99 1.4 10 0/-18
1 277 73 0.31 85 1.4 26 0/-18
4 120 208 1.73 .95 .46 99 1.4 5 -20/-29
4 277 204 0.76 .95 .47 97 1.4 9 -20/-29
3 120 176 1.47 .99 .56 99 1.4 6 -20/-29
3 277 173 0.65 .99 .57 94 1.4 10 -20/-29
F58T8
2 120 128 1.07 99 1.4 7 -20/-29
2 277 127 0.49 94 1.4 16 -20/-29
1 120 67 0.57 99 1.4 10 -20/-29
1 277 68 0.29 85 1.4 25 -20/-29
4 120 214 1.79 1.00 .47 99 1.4 5 0/-18
4 277 210 0.78 1.00 .48 98 1.4 8 0/-18
3 120 181 1.51 1.01 .56 99 1.4 6 0/-18
3 277 178 0.66 1.01 .57 97 1.4 9 0/-18
F54T5/WM
2 120 130 1.09 .96 .74 99 1.4 7 0/-18
Linear Fluorescent Ballasts

2 277 135 0.51 .96 .71 95 1.4 15 0/-18

1 120 69 0.58 1.12 1.62 99 1.4 10 0/-18
1 277 70 0.30 1.12 1.60 85 1.4 26 0/-18
4 120 220 1.84 1.00 .45 99 1.4 5 -20/-29
4 277 216 0.80 1.00 .46 98 1.4 8 -20/-29
3 120 185 1.55 1.01 .55 99 1.4 6 -20/-29
3 277 182 0.68 1.01 .55 97 1.4 9 -20/-29
F54T5/HO
2 120 133 0.58 .96 .72 99 1.4 7 -20/-29
2 277 132 0.50 .96 .72 95 1.4 15 -20/-29
1 120 69 0.58 1.11 1.61 99 1.4 10 -20/-29
1 277 70 0.30 1.11 1.59 85 1.4 26 -20/-29

Product is compliant with material restriction requirements of RoHS Product

ULisType 1 Outdoor
compliant UL restriction
with material Type HL FCC – CLASS Aof
requirements Non-Consumer
RoHS ULANSI-C62.41-1991
Type 1 Outdoor UL Type HL FCC – CLASS A Non-Consumer ANSI-C62.41-1991

Safety and ULPerformance

Class P
ANSI-C82.11-Cons 2002 UL Type CC UL Listed
ANSI-C82.11-Cons CSA
2002 UL Class P UL Type CC UL Listed CSA
High Temperature Rated: Suitable for high temperature applications High
70C Temperature
max case temp 5 yr warranty
Rated: or 90C
Suitable for highmax case tempapplications
temperature 3 yr warranty 70C max case temp 5 yr warranty or 90C max case temp 3 yr warranty

124 – www.LED.com/Lamps
Linear Fluorescent Ballasts
62731 – GE454PS347-E • T5 Electronic Programmed Start
• High Efficiency T5 ballast with Continuous Cathode Cutout Technology
UltraStart® Programmed Rapid Start Ballast • Lower Maintenance Costs with Parallel Lamp Operation
• Fast Starting Time <700ms
T5 High Output • Auto-Restart withstands temporary losses in power without the need to cycle power
4-1 - F54T5HO 347V UltraStart LFL E Can ®
• Anti-Striation Control for better light quality, with no striations.
• 90°C case rating/UL Approved 55°C Ambient Rating
• Individual lamp End of Lamp Life protection - only one lamp shuts down at end of life
• Cold temperature -20°F Minimum Starting Temperature

General Characteristics Dimensions

Ballast Type Electronic – Programmed / Rapid Start Length (L) 16.7 in (424 mm)
Starting Method Programmed Rapid Start
Width (W) 1.7 in (43.2 mm)
Lamp Wiring Parallel
Height (H) 1.2 in (30.5 mm)
Line Voltage Regulation(+/-) 10%
Ambient Temperature (MAX) Mounting Dimensions
Case Temperature (MAX) 70°C (158°F) Mount Length (M) 16.1 in (409 mm)
Ballast Factor Normal Weight 2.5lbs
Power Factor Correction Active
Exit Type Side
Sound Rating A (20-24 decibels)
Remote Mounting Distance to Lamp 12ft
Enclosure Type Metal Can
Lamp End-of-Life Safety Shutdown Circuit/Auto-restart/ Remote Mounting Wire Gauge 18 AWG
Additional Info
Anti-striation control Lead Lengths Length (± 1 in)

Electrical Characteristics Black 25 in (635 mm)

Supply Current Frequency 50 Hz/60 Hz White 25 in (635 mm)
Blue 34 in (864 mm)
Blue/White 34 in (864 mm)
Red 34 in (864 mm)
Red/White 34 in (864 mm)
Yellow 35 in (889 mm)

Specifications and lamp wattage

# of Line Volts System Watts Nom. Line System Ballast Ballast Efficacy Power Factor
Lamp Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps (V) (W) Current (A) Factor Factor % (>=)
4 347 229 0.68 1.00 1.75 99 1.4 5 -22/-30
3 347 176 0.53 1.01 1.70 99 1.4 5 -22/-30
F54T5/HO
2 347 125 0.37 .96 1.60 99 1.4 7 -22/-30
1 347 68 0.21 1.12 1.47 94 1.4 16 -22/-30
4 347 227 0.68 1.06 1.76 99 1.4 5 0/-18
3 347 177 0.53 1.11 1.69 99 1.4 5 0/-18
FT50W/4P
2 347 126 0.37 1.59 99 1.4 6 0/-18
1 347 69 0.22 1.47 94 1.4 16 0/-18
4 347 221 0.66 .86 1.81 99 1.4 5 0/-18
3 347 173 0.51 .91 1.73 99 1.4 5 0/-18
FT55W/4P
2 347 123 0.37 1.63 99 1.4 7 0/-18
1 347 68 0.22 1.47 92 1.4 19 0/-18
4 347 219 0.65 1.00 1.83 99 1.4 5 0/-18
3 347 171 0.51 1.01 1.75 99 1.4 5 0/-18
F54T5/WM
2 347 121 0.36 .96 1.65 99 1.4 6 0/-18
1 347 66 0.21 1.12 1.52 94 1.4 14 0/-18
4 347 209 0.62 .95 1.91 99 1.4 5 -22/-30
3 347 164 0.49 .99 1.83 99 1.4 5 -22/-30
F58T8
2 347 117 0.35 .96 1.71 99 1.4 6 -22/-30
1 347 65 0.20 1.12 1.54 97 1.4 9 -22/-30
4 347 206 0.63 1.00 1.94 99 1.4 5 0/-18
3 347 161 0.48 1.04 1.86 99 1.4 5 0/-18
F54T5/47W
2 347 117 0.35 1.06 1.71 99 1.4 6 0/-18 Linear Fluorescent Ballasts
1 347 65 0.20 1.08 1.54 97 1.4 10 0/-18

UL Type 1 Outdoor UL Type HL FCC – CLASS A Non-Consumer ANSI-C62.41-1991 ANSI-C82.11-Cons 2002

Safety and Performance ANSI-C62.41-2002 UL Class P UL Type CC UL 55C Ambient Approved Product is compliant with material restriction requirements of RoHS

High Temperature Rated: Suitable for high temperature applications No PCB’s 70C max case temp 5 yr warranty or 90C max case temp 3 yr warranty

www.LED.com/Lamps – 125
 Linear Fluorescent Ballasts
74119 – GETR480/277-250W • Precision-wound coils, ensuring even heat dissipation and the highest electrical integrity.
• Non-Isolated Autotransformer designed specifically for lighting applications to step
down 480V to 277V
Step Down Transformers • For use with one or more electronic 277V or universal voltage ballasts within max total
Non-Isolated Autotransformer 480 to 277V, <250 Watts (VA), A Can system power of autotransformer
• 480Vrms Input, 60Hz Only, 277Vrms Full Load Output or 347Vrms Input
• For loads with total system power <250VA
• Internal Auto Reset Thermal Protector Rated 100C
• For use on single phase or ground referred systems
• Five Year Limited Warranty
• 93% electrical efficiency

General Characteristics Dimensions

Ballast Type Magnetic - Core & Coil Length (L) 9.5 in (241 mm)
Case Temperature (MAX) 100°C (212°F)
Width (W) 1.7 in (43.2 mm)
Sound Rating A (20-24 decibels)
Height (H) 1.18 in (30 mm)
Enclosure Type Metal
Additional Info Thermally protected Mounting Dimensions
Mount Length (M) 8.9 in (226 mm)
Electrical Characteristics Mount Width (X or F) 1.18 in (30 mm)
Supply Current Frequency 60 Hz Mount Slots (MS) 0.3 in (8 mm)
Supply Current Frequency (MIN) 60 Hz
Exit Type Side

Specifications by lamp and wattage/Line Volts (V) Remote Mounting Wire Gauge 14 AWG
480V to 277V Lead Lengths Length (± 1 in)
347V to 200V Black 14.0 in (356 mm)
Blue 14.0 in (356 mm)
Red 14.0 in (356 mm)

Saftey and Performance UL Type 1 Outdoor UL Listed UL Listed Autotransformer cUL

UL Type 1 Outdoor UL Listed cUL

• Precision-wound coils, ensuring even heat dissipation and the highest electrical integrity.
• Non-Isolated Autotransformer designed specifically for lighting applications to step
74120 – GETR480/277-375W down 480V to 277V
• For use with one or more electronic 277V or universal voltage ballasts within max total
Step Down Transformers system power of autotransformer
Non-Isolated Autotransformer 480 to 277V, <375 Watts (VA), F Can • 480Vrms Input, 60Hz Only, 277Vrms Full Load Output or 347Vrms Input
• For loads with total system power <375VA
• Internal Auto Reset Thermal Protector Rated 100C
• For use on single phase or ground referred systems
• Five Year Limited Warranty
• 93% electrical efficiency

General Characteristics Dimensions

Ballast Type Magnetic - Core & Coil Length (L) 11.75 in (299 mm)
Case Temperature (MAX) 100°C (212°F)
Width (W) 1.7 in (43.2 mm)
Sound Rating A (20-24 decibels)
Height (H) 1.18 in (30 mm)
Enclosure Type Metal
Additional Info Thermally protected Mounting Dimensions
Mount Length (M) 11.1 in (283 mm)
Electrical Characteristics Mount Slots (MS) 0.3 in (8 mm)
Linear Fluorescent Ballasts

Supply Current Frequency 60 Hz

Exit Type Side
Supply Current Frequency (MIN) 60 Hz
Remote Mounting Wire Gauge 14 AWG
Specifications by lamp and wattage/Line Volts (V) Lead Lengths Length (± 1 in)
480V to 277V Black 14.0 in (356 mm)
347V to 200V
Blue 14.0 in (356 mm)
Red 14.0 in (356 mm)

UL Type 1 Outdoor UL Listed UL Listed Autotransformer cUL

Safety and Performance UL Type 1 Outdoor UL Listed cUL

126 – www.LED.com/Lamps
Linear Fluorescent Ballasts
74472 – GE240PS-MV-N (replaces 24107) • For F20 (2ft), F30 (3ft), F34/F40 (4ft) T12 Lamps
• High-performance electronic ballast for all general fluorescent applications
ProLine® • Multi-voltage technology handles voltage from 120 to 277V
• Light weight, low-profile housing
T12 Multivolt 120V – 277V • Parallel lamp operation means system maintenance is easier to manage
2 or 1 – F40 or F34T12 Rapid Start 120 to 277 "N" BF ProLine® T12

General Characteristics Dimensions

Ballast Type Electronic – Programmed / Rapid Start Length (L) 9.5 in (241 mm)
Starting Method Rapid Start
Width (W) 1.3 in (33 mm)
Lamp Wiring Parallel
Height (H) 1.2 in (30.5 mm)
Line Voltage Regulation(+/-) 10%
Ambient Temperature (MAX) Mounting Dimensions
Case Temperature (MAX) 70°C (158°F) Mount Length (M) 8.9 in (226 mm)
Ballast Factor Normal Mount Width (X or F) 1.1 in (28 mm)
Power Factor Correction Active
Mount Slots (MS) 0.3 in (8 mm)
Sound Rating A (20-24 decibels)
Enclosure Type Metal Weight 1.06lbs
Additional Info Auto-restart, Thermally protected Exit Type Side
Remote Mounting Distance to Lamp 18ft
Electrical Characteristics Remote Mounting Wire Gauge 18 AWG
Supply Current Frequency 60 Hz
Lead Lengths Length (± 1 in)
Yellow 48 in (1219 mm)
Blue 33 in (838 mm)
Red 33 in (838 mm)
Black 25 in (635 mm)
White 25 in (635 mm)

Specifications and lamp wattage

# of Line Volts System Watts Nom. Line System Ballast Ballast Efficacy Power Factor
Lamp Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps (V) (W) Current (A) Factor Factor % (>=)
2 120 74 0.67 .89 1.20 99 1.7 6 50/10
2 277 73 0.30 .89 1.22 97 1.7 10 50/10
F40T12
1 120 48 0.41 99 1.7 7 50/10
1 277 48 0.19 95 1.7 10 50/10
2 120 75 0.63 .88 1.17 99 1.7 7 50/10
2 277 72 0.27 .88 1.22 94 1.7 16 50/10
F40T10
1 120 42 0.35 99 1.7 10 50/10
1 277 42 0.17 88 1.7 16 50/10
2 120 63 0.56 .87 1.38 99 1.7 7 50/10
2 277 62 0.26 .87 1.40 96 1.7 10 50/10
F34T12
1 120 41 0.35 99 1.7 8 50/10
1 277 41 0.17 94 1.7 11 50/10
2 120 50 0.42 .95 1.90 99 1.7 9 50/10
2 277 50 0.20 .95 1.90 91 1.7 18 50/10
F30T12/WM
1 120 30 0.26 99 1.7 12 50/10
1 277 30 0.13 82 1.7 27 50/10
2 120 60 0.31 .95 1.58 99 1.7 7 50/10
2 277 58 0.22 .95 1.64 96 1.7 10 50/10
F30T12
1 120 37 0.31 99 1.7 8 50/10
1 277 37 0.16 94 1.7 11 50/10
2 120 46 0.39 1.00 2.17 99 1.7 8 50/10
2 277 45 0.18 1.00 2.22 94 1.7 11 50/10
F20T12
1 120 28 0.24 99 1.7 9 50/10
1 277 29 0.13 92 1.7 17 50/10

Linear Fluorescent Ballasts

Safety and Performance UL Type 1 Outdoor UL Type HL UL Class P NRCan FCC Part 18 Class B at 120 volts cUL Listed UL Listed

Product is compliant with material restriction requirements of RoHS

www.LED.com/Lamps – 127
 Linear Fluorescent Ballasts
74474 – GE-260IS-MV-N (replaces 24108) • For T12 4ft – 8ft Slimline Lamps
• High-performance electronic ballast for all general fluorescent applications
ProLine® • Instant start electronic ballast for long lamp starting cycles and low initial cost
• Multi-voltage technology handles voltage from 120 to 277V
T12 Multivolt 120V – 277V • Light weight, low-profile housing
2 or 1 – F96T12 Instant Start 120 to 277 • Parallel lamp operation means system maintenance is easier to manage

General Characteristics Dimensions

Ballast Type Electronic – Multivolt Instant Start Length (L) 9.5 in (241 mm)
Starting Method Rapid Start
Width (W) 1.7 in (43 mm)
Lamp Wiring Parallel
Height (H) 1.2 in (30.5 mm)
Line Voltage Regulation(+/-) 10%
Ambient Temperature (MAX) Mounting Dimensions
Case Temperature (MAX) 70°C (158°F) Mount Length (M) 8.9 in (226 mm)
Ballast Factor Normal Mount Width (X or F) 1.1 in (28 mm)
Power Factor Correction Active
Mount Slots (MS) 0.3 in (8 mm)
Sound Rating A (20-24 decibels)
Enclosure Type Metal Weight 2.40lbs
Additional Info Auto-restart, Thermally protected Exit Type Side
Remote Mounting Distance to Lamp 18ft
Electrical Characteristics Remote Mounting Wire Gauge 18 AWG
Supply Current Frequency 50Hz/60 Hz
Lead Lengths Length (± 1 in)
Black 25 in (635 mm)
White 25 in (635 mm)
Red 59 in (1499 mm)
Blue 67 in (1702 mm)

Specifications and lamp wattage

# of Line Volts System Watts Nom. Line System Ballast Ballast Efficacy Power Factor
Lamp Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps (V) (W) Current (A) Factor Factor % (>=)
2 120 107 0.94 .88 .82 99 1.7 8 60/16
2 277 106 0.40 .88 .83 96 1.7 10 60/16
F96T12/WMP
1 120 68 0.60 1.00 1.47 99 1.7 10 60/16
1 277 68 0.27 1.00 1.47 95 1.7 12 60/16
2 120 112 0.98 .90 .80 99 1.7 8 60/16
2 277 110 0.42 .90 .82 97 1.7 10 60/16
F96T12/WM
1 120 72 0.63 1.00 1.39 99 1.7 10 60/16
1 277 71 0.28 1.00 1.41 95 1.7 12 60/16
2 120 141 1.24 .90 .64 99 1.7 8 0/-18
2 277 138 0.53 .90 .65 98 1.7 10 0/-18
F96T12
1 120 90 0.79 1.02 1.13 99 1.7 10 0/-18
1 277 89 0.34 1.02 1.15 96 1.7 12 0/-18
2 120 125 1.10 .90 .72 99 1.7 8 0/-18
2 277 123 0.47 .90 .73 97 1.7 10 0/-18
F84T12
1 120 80 0.70 1.04 1.30 99 1.7 10 0/-18
1 277 79 0.30 1.04 1.32 96 1.7 12 0/-18
2 120 107 0.94 .90 .84 99 1.7 8 0/-18
2 277 106 0.40 .90 .85 97 1.7 10 0/-18
F72T12
1 120 69 0.60 1.08 1.51 99 1.7 10 0/-18
1 277 69 0.27 1.08 1.51 95 1.7 12 0/-18
2 120 97 0.86 .90 .93 99 1.7 8 0/-18
2 277 96 0.37 .90 .94 97 1.7 10 0/-18
F64T12
1 120 63 0.55 1.08 1.71 99 1.7 10 0/-18
1 277 63 0.25 1.08 1.71 95 1.7 12 0/-18
2 120 92 0.81 .90 .98 99 1.7 8 0/-18
2 277 91 0.35 .90 .99 96 1.7 10 0/-18
F60T12
Linear Fluorescent Ballasts

1 120 60 0.53 1.08 1.80 99 1.7 10 0/-18

1 277 60 0.28 1.08 1.80 94 1.7 12 0/-18
2 120 73 0.65 .90 1.23 99 1.7 8 0/-18
2 277 73 0.29 .90 1.23 95 1.7 10 0/-18
F48T12
1 120 49 0.43 1.10 2.24 99 1.7 10 0/-18
1 277 48 0.20 1.10 2.29 89 1.7 12 0/-18

Safety and Performance UL Type 1 Outdoor NRCan UL Type HL FCC – CLASS A Non-Consumer UL Class P cUL Listed UL Listed

Product is compliant with material restriction requirements of RoHS

128 – www.LED.com/Lamps
Linear Fluorescent Ballasts
35727 – GE296HO-MVPS-N
ProLine® T12 High Output
T12 Multivolt 120V – 277V
2 or 1 – F96T12 HO RS 120 to 277 Multivolt ProLine®

General Characteristics Dimensions

Ballast Type Electronic – Programmed/ Rapid Start Length (L) 11.75 in (299 mm)
Starting Method Rapid Start
Width (W) 2.15 in (55 mm)
Lamp Wiring Series
Height (H) 1.61 in (41 mm)
Line Voltage Regulation(+/-) 10%
Ambient Temperature (MAX) 105°F (41°C) Mounting Dimensions
Case Temperature (MAX) 75°C (167°F) Mount Length (M) 11.0 in (279 mm)
Ballast Factor Normal Mount Width (X or F) 2.15 in (55 mm)
Power Factor Correction Active
Mount Slots (MS)
Sound Rating A (20-24 decibels)
Weight
Additional Info Auto-restart, Thermally protected
Exit Type Side

Electrical Characteristics
Supply Current Frequency 50Hz/60 Hz

Specifications by lamp and wattage

# of Line Volts System Watts Nom. Line System Ballast Ballast Efficacy Power Factor
Lamp Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps (V) (W) Current (A) Factor Factor % (>=)
2 120 164 1.38 .90 .55 99 1.7 10 60/16
F96T12/HO/WM
2 277 164 0.62 .90 .55 99 1.7 10 60/16
2 120 196 1.65 .90 .47 99 1.7 10 -20/-29
2 277 196 0.73 .90 .46 97 1.7 10 -20/-29
F96T12/HO
1 120 104 0.88 .92 .88 99 1.7 15 -20/-29
1 277 104 0.42 .92 .88 95 1.7 15 -20/-29
2 120 154 1.30 .90 .58 99 1.7 10 -20/-29
F72T12/HO
2 277 154 0.57 .90 .58 96 1.7 10 -20/-29
2 120 120 1.17 .90 .75 99 1.7 10 -20/-29
F70T8
2 277 119 0.52 .90 .76 97 1.7 10 -20/-29
2 120 132 0.50 .90 .68 96 1.7 10 -20/-29
F60T12/HO
2 277 132 0.50 .90 .68 96 1.7 10 -20/-29
2 120 112 0.95 .90 .80 99 1.7 15 -20/-29
F48T12/HO
2 277 113 0.43 .90 .80 95 1.7 15 -20/-29

Linear Fluorescent Ballasts

Safety and Performance cUL Listed UL Listed FCC Part 18 (Class A) Non Consumer

www.LED.com/Lamps – 129
 Compact Fluorescent Ballasts
Understanding Compact Fluorescent Ballasts
Compact fluorescent (CFL) ballasts provide energy saving Multivolt ProLine®
alternatives to halogen, incandescent or HID light sources. Multivolt ProLine® CFL ballasts are offered in 3W
Multi volt ProLine® CFL programmed start ballasts combine configuration: 3-way mounting kits that allow you to have
universal voltage (108-305V) technology with multi-lamp all three mounting options with one kit.
capability, dual entry color-coded connectors and ultra
system reliability to create an industry leading CFL solution Multivolt ProLine® CFL ballasts come with a five-year
for commercial and residential applications. ballast and one-year lamp limited warranty. These ballasts
also meet the EPA's ENERGY STAR® fixture program
UltraMax® and UltraStart® High Lumen Biax® ballasts with requirements with a Consumer Class B EMI rating for
the High Lumen WattMiser® Biax® lamp provides the residential applications, as well as a high power factor
perfect solution for high efficiency and high lumen output in ballast design.
a small space.
Use the Multivolt ProLine® CFL Multi-Lamp compatibility
chart (page 17-3) to find the right ballast for your need.
UltraMax® Instant Start Ballasts:
• For use in long burn cycles (>10 hr cycles) to maintain
lamp life ProLine® CFL Date Code System
• High efficiency (>90%) design Date Code Format: 01 200801 = Week2008 = Year
• Universal voltage (120-277V)
• Striation control circuitry UltraMax® and UltraStart® Biax® ballasts have the same date
• Small compact housing code system as all linear fluorescent ballasts.

UltraStart® Programmed Start Ballasts:

• For use in shorter burn cycles (<3 hr cycles) to
extend lamp life
• High efficiency (>90%) cathode cutout design
• Universal voltage (120-277V)
• Striation control circuitry
• Small compact housing
• Parallel lamp operation
• <700ms fast starting time
• Ballasts available for
both F40/30W and
Compact Fluorescent Ballasts

F40/25W lamps

130 – www.LED.com/Lamps
Compact Fluorescent Ballasts
63089 – GEC213-MVPS-3W • For 13 – 70W T4 CFL Lamps
• Multi-voltage technology means a single ballast handles voltage from 108V to 305V
ProLine® CFL Electronic Ballasts • Programmed starting for extended lamp life
• End-of-Lamp-Life protection
2 or 1 – CFQ13W/G24q 120-227V ProLine® PS • Color coded poke-in connectors simplifies wiring

General Characteristics Dimensions

Ballast Type Electronic – Program/ Rapid Start Physical Parameters 3W BES SE
Starting Method Programmed Start
Length (L) 5.0 in (127 mm) 4.26 in (107 mm) 5.0 in (127 mm)
Lamp Wiring Series
Width (W) 2.4 in (61 mm) 2.4 in (61 mm) 2.4 in (61 mm)
Line Voltage Regulation(+/-) 10%
Ambient Temperature (MAX) 104°F (40°C) Height (H) 1.0 in (25 mm) 1.0 in (25 mm) 1.0 in (25 mm)
Case Temperature (MAX) 70°C (158°F) Mounting Dimensions
Ballast Factor Normal Bracket Length (BL)
Power Factor Correction Active
Mount Length (M) 4.63 in (118 mm)
Sound Rating A (20-24 decibels)
End-of-Life Protection (EOL), Thermally protected, Mount Width (X or F) 2.4 in (61 mm)
Additional Info
Universal voltage Mount Slots (MS)
Weight 0.381 lbs 0.423 lbs 0.395 lbs
Electrical Characteristics
Exit Type Dual Entry (SE/BE, BES, 3W)
Supply Current Frequency 50Hz/60 Hz
Remote Mounting Distance to Lamp 20ft
Remote Mounting Wire Gauge 18 AWG

Specifications by lamp and wattage

# of Line Volts System Watts Nom. Line System Ballast Ballast Efficacy Power Factor
Lamp Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps (V) (W) Current (A) Factor Factor % (>=)
2 120 32 0.26 1.04 3.30 99 1.7 10 -20/-29
2 277 32 0.12 1.04 3.30 96 1.7 10 -20/-29
CFQ13W/G24q
1 120 15 0.19 1.09 7.30 99 1.7 10 -20/-29
1 277 15 0.06 1.09 7.30 89 1.7 18 -20/-29
2 120 32 0.27 1.07 3.30 99 1.7 10 -20/-29
2 277 32 0.12 1.07 3.30 96 1.7 10 -20/-29
CFTR13W/GX24q
1 120 16 0.13 1.10 6.90 99 1.7 10 -20/-29
1 277 16 0.07 1.10 6.90 88 1.7 18 -20/-29
2 120 26 0.22 1.06 4.10 99 1.7 10 -20/-29
2 277 25 0.10 1.06 4.20 94 1.7 11 -20/-29
CFS10W/GR10q
1 120 13 0.10 1.09 8.40 99 1.7 10 -20/-29
1 277 13 0.07 1.09 8.40 84 1.7 21 -20/-29
1 120 19 0.16 .99 5.20 99 1.7 10 -20/-29
CFQ18W/G24q
1 277 19 0.07 .99 5.20 89 1.7 16 -20/-29
1 120 19 0.16 .96 5.10 99 1.7 10 -20/-29
CFTR18W/GX24q
1 277 19 0.08 .96 5.10 88 1.7 15 -20/-29
1 120 17 0.14 1.00 5.90 99 1.7 10 -20/-29
CFS16W/GR10q
1 277 17 0.07 1.00 5.90 90 1.7 16 -20/-29

Compact Fluorescent Ballasts

Safety and Performance FCC Part 18 Class B UL Class P UL Type 1 Outdoor No PCB’s ANSI Standard C82.11-Cons 2002 ANSI Standard C62.41-1991

www.LED.com/Lamps – 131
 Compact Fluorescent Ballasts
63093 – GEC218-MVPS-3W • For 13 – 70W T4 CFL Lamps
• Multi-voltage technology means a single ballast handles voltage from 108V to 305V
ProLine® CFL Electronic Ballasts • Programmed starting for extended lamp life
• End-of-Lamp-Life protection
2 or 1 – CFQ18W/G24q 120-227V ProLine® PS • Color coded poke-in connectors simplifies wiring

General Characteristics Dimensions

Ballast Type Electronic – Program/ Rapid Start Physical Parameters 3W BES SE
Starting Method Programmed Start
Length (L) 5.0 in (127 mm) 4.26 in (107 mm) 5.0 in (127 mm)
Lamp Wiring Series
Width (W) 2.4 in (61 mm) 2.4 in (61 mm) 2.4 in (61 mm)
Line Voltage Regulation(+/-) 10%
Ambient Temperature (MAX) 104°F (40°C) Height (H) 1.0 in (25 mm) 1.0 in (25 mm) 1.0 in (25 mm)
Case Temperature (MAX) 70°C (158°F) Mounting Dimensions
Ballast Factor Normal Bracket Length (BL)
Power Factor Correction Active
Mount Length (M) 4.63 in (118 mm)
Sound Rating A (20-24 decibels)
End-of-Life Protection (EOL), Thermally protected, Mount Width (X or F) 2.4 in (61 mm)
Additional Info
Universal voltage Mount Slots (MS)
Weight 0.412 lbs 0.454 lbs 0.426 lbs
Electrical Characteristics
Exit Type Dual Entry (SE/BE, BES, 3W)
Supply Current Frequency 50Hz/60 Hz
Remote Mounting Distance to Lamp 20ft
Remote Mounting Wire Gauge 18 AWG

Specifications by lamp and wattage

# of Line Volts System Watts Nom. Line System Ballast Ballast Efficacy Power Factor
Lamp Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps (V) (W) Current (A) Factor Factor % (>=)
2 120 43 0.35 1.05 2.40 99 1.7 10 -20/-29
2 277 42 0.15 1.05 2.50 96 1.7 10 -20/-29
CFQ18W/G24q
1 120 21 0.17 1.08 5.10 99 1.7 10 -20/-29
1 277 21 0.08 1.08 5.10 88 1.7 15 -20/-29
2 120 44 0.37 1.04 2.40 99 1.7 10 -20/-29
2 277 43 0.16 1.04 2.40 96 1.7 10 -20/-29
CFTR18W/GX24q
1 120 22 0.19 1.07 4.90 99 1.7 10 -20/-29
1 277 22 0.08 1.07 4.90 87 1.7 14 -20/-29
2 120 45 0.38 .86 1.90 99 1.7 10 -20/-29
2 277 44 0.16 .86 2.00 96 1.7 10 -20/-29
CFS21W/GR10q
1 120 22 0.19 .93 4.20 99 1.7 10 -20/-29
1 277 22 0.09 .93 4.20 88 1.7 15 -20/-29
2 120 39 0.32 1.00 2.60 99 1.7 10 -20/-29
CFS16W/GR10q
2 277 38 0.14 1.00 2.60 95 1.7 10 -20/-29
1 120 22 0.19 .91 4.10 99 1.7 10 -20/-29
CFQ26W/GX24q
1 277 22 0.09 .92 4.20 89 1.7 14 -20/-29
1 120 26 0.21 .85 3.30 99 1.7 10 -20/-29
CFTR26W/GX24q
1 277 26 0.10 .85 3.30 89 1.7 14 -20/-29
1 120 25 0.21 .87 3.50 99 1.7 10 -20/-29
CFS28W/GR10q
1 277 25 0.10 .87 3.50 91 1.7 13 -20/-29
Compact Fluorescent Ballasts

Safety and Performance FCC Part 18 Class B UL Class P UL Type 1 Outdoor No PCB’s ANSI Standard C82.11-Cons 2002 ANSI Standard C62.41-1991

132 – www.LED.com/Lamps
Compact Fluorescent Ballasts
63097 – GEC226-MVPS-3W • For 13 – 70W T4 CFL Lamps
• Multi-voltage technology means a single ballast handles voltage from 108V to 305V
ProLine® CFL Electronic Ballasts • Programmed starting for extended lamp life
• End-of-Lamp-Life protection
2 – CFQ26W, FT24 or 1 – 24W CFTR32 120-227V ProLine® PS • Color coded poke-in connectors simplifies wiring
General Characteristics Dimensions
Ballast Type Electronic – Program/ Rapid Start Physical Parameters 3W BES SE
Starting Method Programmed Start
Length (L) 5.0 in (127 mm) 4.26 in (107 mm) 5.0 in (127 mm)
Lamp Wiring Series
Width (W) 2.4 in (61 mm) 2.4 in (61 mm) 2.4 in (61 mm)
Line Voltage Regulation(+/-) 10%
Ambient Temperature (MAX) 104°F (40°C) Height (H) 1.0 in (25 mm) 1.0 in (25 mm) 1.0 in (25 mm)
Case Temperature (MAX) 75°C (167°F) Mounting Dimensions
Ballast Factor Normal Bracket Length (BL)
Power Factor Correction Active
Mount Length (M) 4.63 in (118 mm)
Sound Rating A (20-24 decibels)
Additional Info Auto restart, Thermally protected, Universal voltage Mount Width (X or F) 2.4 in (61 mm)
Mount Slots (MS)

Electrical Characteristics Weight 0.419 lbs 0.461 lbs 0.434 lbs

Supply Current Frequency 50Hz/60 Hz Exit Type Dual Entry (SE/BE, BES, 3W)
Remote Mounting Distance to Lamp 12ft
Remote Mounting Wire Gauge 18 AWG

Specifications by lamp and wattage

# of Line Volts System Watts Nom. Line System Ballast Ballast Efficacy Power Factor
Lamp Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps (V) (W) Current (A) Factor Factor % (>=)
2 120 56 0.47 1.02 1.82 99 1.7 10 -20/-29
2 277 54 0.20 1.02 1.89 97 1.7 11 -20/-29
CFQ26W/G24q
1 120 30 0.25 1.04 3.47 99 1.7 10 -20/-29
1 277 30 0.12 1.04 3.47 93 1.7 13 -20/-29
2 120 64 0.53 .97 1.52 99 1.7 10 -20/-29
2 277 64 0.23 .88 1.38 97 1.7 12 -20/-29
CFTR26W/GX24q
1 120 32 0.26 1.01 3.16 99 1.7 10 -20/-29
1 277 32 0.12 1.00 3.16 94 1.7 13 -20/-29
2 120 56 0.47 1.12 2.00 99 1.7 10 -20/-29
CFS21W/GR10q
2 277 55 0.20 1.11 2.02 96 1.7 11 -20/-29
1 120 51 0.42 .92 1.80 99 1.7 10 -20/-29
CFTR42W/GX24q
1 277 50 0.18 .92 1.84 97 1.7 12 -20/-29
1 120 39 0.33 1.24 3.18 99 1.7 10 -20/-29
CFTR32W/GX24q
1 277 39 0.15 1.23 3.15 95 1.7 13 -20/-29
1 120 40 0.33 .89 2.23 99 1.7 10 -20/-29
FC16T9 40W
1 277 40 0.14 .94 2.35 95 1.7 13 -20/-29
1 120 27 0.23 1.04 3.85 99 1.7 10 -20/-29
FT24W/2G11
1 277 27 0.11 1.10 4.07 91 1.7 14 -20/-29
1 120 35 0.29 .94 2.69 99 1.7 10 -20/-29
FT36W/2G11
1 277 35 0.13 .94 2.69 94 1.7 13 -20/-29
1 120 33 0.27 .97 2.94 99 1.7 10 -20/-29
FT39W/2G11
1 277 33 0.12 .98 2.97 94 1.7 14 -20/-29

Compact Fluorescent Ballasts

Safety and Performance FCC Part 18 Class B UL Class P UL Type 1 Outdoor No PCB’s ANSI Standard C82.11-Cons 2002 ANSI Standard C62.41-1991

www.LED.com/Lamps – 133
 Compact Fluorescent Ballasts
63100 – GEC242-MVPS-3W • For 13 – 70W T4 CFL Lamps
• Electronic compact fluorescent ballasts for all general fluorescent applications
ProLine® CFL Electronic Ballasts • Low-profile case
2 – 42/36/32/28/26/24 watt 120-227V ProLine® PS

General Characteristics Dimensions

Ballast Type Electronic – Program/ Rapid Start Length (L) 5.0 in (127 mm)
Starting Method Programmed Start
Width (W) 3.0 in (76 mm)
Lamp Wiring Series
Height (H) 1.38 in (35 mm)
Line Voltage Regulation(+/-) 10%
Ambient Temperature (MAX) 122°F (50°C) Mounting Dimensions
Case Temperature (MAX) 75°C (167°F) Bracket Length (BL) 4.63 in (118 mm)
Ballast Factor Normal Mount Length (M)
Power Factor Correction Active
Mount Width (X or F)
Sound Rating A (20-24 decibels)
Additional Info Auto restart, Thermally protected, Universal voltage Mount Slots (MS)
Weight 0.90 lbs
Electrical Characteristics Exit Type Dual Entry (SE/BE, BES, 3W)
Supply Current Frequency 50Hz/60 Hz

Specifications by lamp and wattage

# of Line Volts System Watts Nom. Line System Ballast Ballast Efficacy Power Factor
Lamp Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps (V) (W) Current (A) Factor Factor % (>=)
2 120 94 0.77 1.00 1.14 99 1.7 10 0/-18
2 277 93 0.38 1.00 1.08 98 1.7 10 0/-18
CFTR42W/GX24q
1 120 47 0.40 1.00 2.13 99 1.7 10 0/-18
1 277 47 0.18 1.00 2.13 96 1.7 10 0/-18
2 120 63 0.53 .95 1.51 99 1.7 10 0/-18
2 277 63 0.23 .95 1.51 98 1.7 12 0/-18
CFTR32W/GX24q
1 120 42 0.35 .96 2.29 99 1.7 10 0/-18
1 277 42 0.13 .96 2.29 96 1.7 12 0/-18
2 120 54 0.45 .90 1.67 99 1.7 10 0/-18
CFQ26W/G24q, 2 277 54 0.21 .90 1.67 97 1.7 12 0/-18
CFTR26W/GX24q 1 120 32 0.27 1.00 3.12 99 1.7 10 0/-18
1 277 32 0.13 1.00 3.12 95 1.7 12 0/-18
2 120 63 0.52 .78 1.25 99 1.7 10 0/-18
2 277 62 0.23 .79 1.27 98 1.7 10 0/-18
CFTR42W/GX24q
1 120 33 0.27 .80 2.45 99 1.7 10 0/-18
1 277 33 0.13 .80 2.44 94 1.7 15 0/-18
2 120 82 0.69 .95 1.16 99 1.7 10 0/-18
2 277 82 0.30 .95 1.16 98 1.7 10 0/-18
CFTR32W/GX24q
1 120 45 0.37 1.00 2.22 99 1.7 10 0/-18
1 277 45 0.17 1.00 2.22 96 1.7 12 0/-18
2 120 70 0.59 .80 1.13 99 1.7 10 0/-18
2 277 70 0.26 .81 1.15 98 1.7 10 0/-18
CFTR42W/GX24q
1 120 37 0.31 .84 2.24 99 1.7 10 0/-18
1 277 37 0.14 .84 2.24 95 1.7 15 0/-18
2 120 52 0.44 1.10 2.11 99 1.7 10 0/-18
2 277 52 0.19 1.10 2.11 97 1.7 12 0/-18
CFTR32W/GX24q
1 120 28 0.23 1.10 3.97 99 1.7 10 0/-18
1 277 28 0.11 1.11 3.92 93 1.7 12 0/-18
1 120 58 0.49 1.00 1.72 99 1.7 10 0/-18
CFS16W/GR10q
1 277 58 0.22 1.00 1.72 97 1.7 12 0/-18
1 120 73 0.61 1.00 1.37 99 1.7 10 0/-18
CFQ26W/GX24q
1 277 73 0.27 1.00 1.37 97 1.7 12 0/-18
Compact Fluorescent Ballasts

1 120 43 0.36 .71 1.65 99 1.7 10 0/-18

CFTR26W/GX24q
1 277 44 0.16 .72 1.66 96 1.7 12 0/-18

Safety and Performance FCC Part 18 Class B at 120 volts UL Class P UL Listed cUL

134 – www.LED.com/Lamps
Compact Fluorescent Ballasts
63100 – GEC242-MVPS-3W (Cont.)
ProLine® CFL Electronic Ballasts
2 – 42/36/32/28/26/24 watt 120-227V ProLine® PS

Specifications by lamp and wattage

# of Line Volts System Watts Nom. Line System Ballast Ballast Efficacy Power Factor
Lamp Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps (V) (W) Current (A) Factor Factor % (>=)
2 120 82 0.69 .95 1.16 99 1.7 10 0/-18
2 277 82 0.30 .95 1.16 98 1.7 10 0/-18
FT40W/2G11
1 120 45 0.37 1.00 2.22 99 1.7 10 0/-18
1 277 45 0.17 1.00 2.22 96 1.7 12 0/-18
2 120 63 0.52 .78 1.25 99 1.7 10 0/-18
2 277 62 0.23 .79 1.27 98 1.7 10 0/-18
FT36W/2G11
1 120 33 0.27 .80 2.45 99 1.7 10 0/-18
1 277 33 0.13 .80 2.44 94 1.7 15 0/-18
2 120 54 0.45 1.00 1.85 99 1.7 10 0/-18
2 277 54 0.20 1.00 1.85 97 1.7 12 0/-18
FT24W/2G11
1 120 26 0.22 .92 3.56 99 1.7 10 0/-18
1 277 27 0.10 .92 3.48 92 1.7 15 0/-18
2 120 60 0.50 .95 1.60 99 1.7 10 0/-18
2 277 60 0.22 .97 1.62 98 1.7 10 0/-18
CFS28W/GR10q
1 120 34 0.29 1.00 2.94 99 1.7 10 0/-18
1 277 34 0.14 1.00 2.94 93 1.7 15 0/-18
1+1 120 67 0.55 .90 1.34 99 1.7 10 0/-18
FC9T5+FC12T5
1+1 277 67 0.25 .90 1.34 98 1.7 10 0/-18
1 120 33 0.28 .49 1.48 99 1.7 10 0/-18
CFS55W/GRY10q-3
1 277 32 0.13 .49 1.53 94 1.7 10 0/-18

Compact Fluorescent Ballasts

Safety and Performance FCC Part 18 Class B at 120 volts UL Class P UL Listed cUL

www.LED.com/Lamps – 135
 Compact Fluorescent Ballasts
71435 – GEC240MAX-A • Electronic compact fluorescent ballasts for all general fluorescent applications
• Low-profile case
High-Lumen Biax® UltraMax® Instant Start • Multi-Voltage technology handles voltage from 120 to 277V
• Energy saving, high efficiency instant start electronic ballast (> 90%)
2 or 1 – FT40W-25W/2G11 Biax - 120-277V UltraMax® Instant Start • Instant start electronic ballast for long lamp starting cycles and low initial cost
• Anti-Striation Control for better light quality, with no striations
• Lamp End-of-Life Safety Shutdown Circuit with Re-Lamping Auto-reset

General Characteristics Dimensions

Ballast Type Electronic – High Efficiency Instant Start Length (L) 9.5 in (241 mm)
Starting Method Instant Start
Width (W) 1.7 in (43 mm)
Lamp Wiring Parallel
Height (H) 1.18 in (30 mm)
Line Voltage Regulation(+/-) 10%
Ambient Temperature (MAX) 105°F (41°C) Mounting Dimensions
Case Temperature (MAX) 70°C (158°F) Mount Length (M) 8.9 in (226 mm)
Ballast Factor Normal Mount Width (X or F) 1.18 in (30 mm)
Power Factor Correction Active
Mount Slots (MS) 0.3 in (8 mm)
Sound Rating A (20-24 decibels)
Weight 1.40lbs
Additional Info End-of-Life Protection (EOL), Thermally protected
Exit Type Side

Electrical Characteristics Remote Mounting Distance to Lamp 12ft

Supply Current Frequency 50Hz/60 Hz Remote Mounting Wire Gauge 18 AWG
Lead Lengths Length (± 1 in)
Blue 31 in (787 mm)
Red 31 in (787 mm)
White 25 in (635 mm)
Black 25 in (635 mm)

Specifications by lamp and wattage

# of Nom. Line Cur- System Ballast
Lamp Line Volts (V) System Watts (W) Power Factor % (>=) Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps rent (A) Factor
2 120 69 0.58 .90 99 1.7 10 0/-18
2 277 68 0.25 .90 95 1.7 10 0/-18
FT40W/4P
1 120 42 0.35 1.00 99 1.7 10 0/-18
1 277 42 0.16 1.00 95 1.7 15 0/-18
2 120 63 0.54 1.00 99 1.7 10 0/-18
2 277 62 0.23 1.00 95 1.7 10 0/-18
FT40W/28W/4P
1 120 38 0.32 1.11 99 1.7 10 0/-18
1 277 38 0.14 1.11 95 1.7 15 0/-18
2 120 58 0.50 1.00 99 1.7 10 0/-18
2 277 57 0.21 1.00 90 1.7 10 0/-18
FT40W/25W/4P
1 120 35 0.29 1.15 99 1.7 10 0/-18
1 277 35 0.13 1.15 95 1.7 15 0/-18
2 120 63 0.54 .94 99 1.7 10 0/-18
2 277 62 0.23 .94 95 1.7 10 0/-18
F32T8
1 120 38 0.32 1.08 99 1.7 10 0/-18
1 277 38 0.14 1.08 95 1.7 15 0/-18
2 120 69 0.59 1.10 99 1.7 10 0/-18
2 277 68 0.25 1.10 95 1.7 10 0/-18
F28T5/HE
1 120 41 0.35 1.26 99 1.7 10 0/-18
1 277 41 0.15 1.26 95 1.7 15 0/-18
Compact Fluorescent Ballasts

Safety and Performance UL Type 1 Outdoor UL Type HL FCC – CLASS A Non-Consumer UL Class P CSA UL Listed

136 – www.LED.com/Lamps
Compact Fluorescent Ballasts
71436 – GEC340MAX-A • Electronic compact fluorescent ballasts for all general fluorescent applications
• Low-profile case
High-Lumen Biax® UltraMax® Instant Start • Multi-Voltage technology handles voltage from 120 to 277V
• Energy saving, high efficiency instant start electronic ballast (> 90%)
3 – FT40W-25W/2G11 Biax - 120-277V UltraMax® Instant Start • Instant start electronic ballast for long lamp starting cycles and low initial cost
• Anti-Striation Control for better light quality, with no striations
• Lamp End-of-Life Safety Shutdown Circuit with Re-Lamping Auto-reset

General Characteristics Dimensions

Ballast Type Electronic – High Efficiency Instant Start Length (L) 9.5 in (241 mm)
Starting Method Instant Start
Width (W) 1.7 in (43 mm)
Lamp Wiring Parallel
Height (H) 1.18 in (30 mm)
Line Voltage Regulation(+/-) 10%
Ambient Temperature (MAX) 105°F (41°C) Mounting Dimensions
Case Temperature (MAX) 70°C (158°F) Mount Length (M) 8.9 in (226 mm)
Ballast Factor Normal Mount Width (X or F) 1.18 in (30 mm)
Power Factor Correction Active
Mount Slots (MS) 0.3 in (8 mm)
Sound Rating A (20-24 decibels)
Weight 1.40 lbs
Additional Info End-of-Life Protection (EOL), Thermally protected
Exit Type Side

Electrical Characteristics Remote Mounting Distance to Lamp 12ft

Supply Current Frequency 50Hz/60 Hz Remote Mounting Wire Gauge 18 AWG
Lead Lengths Length (± 1 in)
Blue 31 in (787 mm)
Red 31 in (787 mm)
White 25 in (635 mm)
Black 25 in (635 mm)

Specifications by lamp and wattage

# of Nom. Line Cur- System Ballast
Lamp Line Volts (V) System Watts (W) Power Factor % (>=) Crest Factor (<=) THD% (<=) Min Starting Temp (°F/°C)
Lamps rent (A) Factor
3 120 100 0.86 .90 99 1.7 10 0/-18
3 277 99 0.36 .90 99 1.7 10 0/-18
FT40W/4P
2 120 76 0.65 .98 99 1.7 10 0/-18
2 277 75 0.27 .98 95 1.7 10 0/-18
3 120 93 0.79 1.00 99 1.7 10 0/-18
3 277 91 0.33 1.00 95 1.7 10 0/-18
FT40W/28W/4P
2 120 70 0.59 1.07 99 1.7 10 0/-18
2 277 69 0.25 1.07 95 1.7 10 0/-18
3 120 85 0.73 1.00 99 1.7 10 0/-18
3 277 84 0.31 1.00 95 1.7 10 0/-18
FT40W/25W/4P
2 120 64 0.53 1.11 99 1.7 10 0/-18
2 277 63 0.23 1.11 95 1.7 10 0/-18
3 120 92 0.78 .94 99 1.7 10 0/-18
3 277 90 0.33 .94 95 1.7 10 0/-18
F32T8
2 120 69 0.59 1.03 99 1.7 10 0/-18
2 277 68 0.25 1.03 95 1.7 10 0/-18
3 120 102 0.87 1.10 99 1.7 10 0/-18
3 277 100 0.37 1.10 99 1.7 10 0/-18
F28T5/HE
2 120 76 0.66 1.19 99 1.7 10 0/-18
2 277 75 0.28 1.19 95 1.7 10 0/-18

Compact Fluorescent Ballasts

Safety and Performance UL Type 1 Outdoor UL Type HL FCC – CLASS A Non-Consumer UL Class P CSA UL Listed

www.LED.com/Lamps – 137
 Electromagnetic HID Ballasts
Understanding Electromagnetic HID Ballasts
Current offers High Intensity Discharge (HID) ballasts HID Ballast Types
for mercury, probe start metal halide, pulse start metal
halide and high pressure sodium lamps. Standard metal
Core and Coil
The most common HID ballasts are the core and coil and
halide lamps or probe start metal halide over 150 watts,
is used in 90% of the fixture applications. Core and coil
like fluorescent, are electric discharge lamps and require
ballasts consist of one, two or three copper (or aluminum)
an open circuit voltage of nearly two times the operating
coils on a core of electrical-grade steel laminations.
voltage to the initiate the arc between the two electrodes in
HID ballasts are classified by the kind of circuit they
the arc tube. High pressure sodium, pulse start metal halide
use: Reactor (R), High Reactance autotransformer (HX),
and probe start metal halide lamps 150 watts or less require
Constant Wattage Autotransformer (CWA), Regulated lag
an ignitor to initiate the high voltage to start the lamps. The
(Reg Lag) or Electronic. HID ballast are also classified as
ballasts provide the starting voltage with the igniter, where
high power factor (HPF) or normal power factor (NPF).
required and provides stability for the lamp. HID lamps
have negative impedance characteristics and would draw
HID ballast 150 watts or less have High Reactance
current until destruction unless a ballast was in place to
Autotransformer circuits and high power factor (HX-HPF).
regulate the current.
HID ballast greater that 150 watts have Constant Wattage
Auto transformer circuits and are high power factor (HPF).
HID lamps take several minutes to warm-up and reach full
light output. If power is interrupted between the lamp and
CWA ballast is the most common circuit for core and coil
the ballast, the arc will extinguish and lamp will go out. The
ballast. CWA circuits provide for stable light regulation. The
lamp must cool down and reduce the vapor pressure before
CWA circuit consists of a high reactance autotransformer
it will re-start. Typical warm-up and restrike times are as
with a capacitor in series with the lamp resulting with high
follows:
power factor ballast. In most CWA ballast circuits a 10%
drop in line voltage will only reduce the light output and
wattage by 5%. The CWA circuit ballast requires an igniter
for QMH pulse start, ceramic metal halide and HPS lamps.
Igniters are also required for QMH lamps 150 watts or less.
Electromagnetic HID Ballasts

138 – www.LED.com/Lamps
Electromagnetic HID Ballasts
86675 – GEM100MLTLC3D-5 • For 20 – 175W Metal Halide HID Lamps
• Magnetic ballast construction ideal for a wide variety of lighting applications
Metal Halide • Precision-wound coils, ensuring even heat dissipation and the highest electrical integrity
• Distributor replacement kit contains the appropriate core and coil with color coded leads,
1 – 100W MH M90 or M140 Quad (120/208/240/277V) a properly rated capacitor and ignitor (if required) and all other components required for
ballast replacement
• Tri Tap ballast (120/277/347)

General Characteristics Dimensions

Ballast Type Magnetic – Core and Coil Length (L) 5.25 in (133 mm
ANSI Lamp Codes M92, M90, M140
Width (W) 1.25 in (32 mm)
Voltage 120/208/240/277
Mounting Dimensions
Line Voltage Regulation(+/-) 5%
Circuit Type HX-HPF Mount Length (M) 4.6 in (117 mm)
Insulation Class 180° C Mount Width (X or F)
Type of Capacitor Dry Film Mount Slots (MS) 0.25 in (6 mm)
Capacitance 12 Mfd GECAP-12/280V-D
A 2.0
Voltage (MIN) 280
B 3.0
Capacitor Temperature Rating 100°C (212°F)
GE Igniter MH350-1A Weight 5.0 lbs
Sound Rating Exit Type Side
Additional Info Nominal Length 2.7 in (69 mm)
Frame Size (H x L) 2.813 in x 3.939 in
Electrical Characteristics
Supply Current Frequency 60 Hz

Specifications by lamp and line voltage

Lamp Specifications by line voltage Lamp Specifications by line voltage
120 208 240 277 120 208 240 277
System Wattage (W) 119 119 119 119 System Wattage (W) 119 119 119 119
Nominal Current 1.10A 0.60A 0.50A 0.50A Nominal Current 1.10A 0.60A 0.50A 0.50A
Ballast Factor 1 1 1 1 Ballast Factor 1 1 1 1
M90, M140
Ballast Efficiency Factor Ballast Efficiency Factor 0.84 0.84 0.84 0.84
100W
Max Input Current 2.27A 1.30A 1.13A 0.98A Ceramic Max Input Current 2.27A 1.30A 1.13A 0.98A
M92
Starting Current 1.26A 0.69A 0.60A 0.53A Metal Halide Starting Current 1.26A 0.69A 0.60A 0.53A
Open Circuit Voltage 274V 274V 274V 274V 100W Open Circuit Voltage 274V 274V 274V 274V
Quartz
Drop Out Voltage 96V 166V 192V 222V Drop Out Voltage 96V 166V 192V 222V
Metal Halide
Power Factor (>=) % 90 90 90 90 Power Factor (>=) % 90 90 90
Min. Starting Temp (°F/°C) -22/-30 -22/-30 -22/-30 -22/-30 Min. Starting Temp (°F/°C) -22/-30 -22/-30 -22/-30 -22/-30
Fuse Rating 5 4 3 3 Fuse Rating 5 4 3 3
UL Bench Top Rise D D D D UL Bench Top Rise D D D D

Electromagnetic HID Ballasts

Safety and Performance cUL Listed UL Listed

www.LED.com/Lamps – 139
 Electromagnetic HID Ballasts
86718 – GEM150MLTLC3D-5 • For 20 – 175W Metal Halide HID Lamps
• Magnetic ballast construction ideal for a wide variety of lighting applications
Metal Halide • Precision-wound coils, ensuring even heat dissipation and the highest electrical integrity
• Distributor replacement kit contains the appropriate core and coil with color coded leads,
1 – 150W MH M102 or M142 Quad (120/208/240/277V) a properly rated capacitor and ignitor (if required) and all other components required for
ballast replacement
• Quad ballast (120, 208, 240, 277)
General Characteristics Dimensions
Ballast Type Magnetic – Core and Coil Length (L) 5.25 in (133 mm)
ANSI Lamp Codes M142, M102
Width (W) 1.25 in (32 mm)
Voltage 120/208/240/277
Mounting Dimensions
Line Voltage Regulation(+/-) 5%
Circuit Type HX-HPF Mount Length (M) 4.6 in (117 mm)
Insulation Class 180° C Mount Width (X or F)
Type of Capacitor Dry Film Mount Slots (MS) 0.25 in (6 mm)
Capacitance 16 Mfd GECAP-16/280V-D
A 2.3
Voltage (MIN) 300
B 4.0
Capacitor Temperature Rating 100°C (212°F)
GE Igniter MH350-1A Weight 7.0 lbs
Exit Type Side
Electrical Characteristics
Nominal Length 2.7 in (69 mm)
Supply Current Frequency 60 Hz
Frame Size (H x L) 2.813 in x 3.939 in
Specifications by lamp and line voltage
Lamp Specifications by line voltage
120 208 240 277
System Wattage (W) 186 186 186 186
Nominal Current 1.60A 1.00A 0.80A 0.70A
Ballast Factor 1 1 1 1
M142, M102
Ballast Efficiency Factor 0.81 0.81 0.81 0.81
150W
Ceramic Max Input Current 3.37A 1.95A 1.68A 1.39A
Metal Halide Starting Current 1.86A 1.03A 0.89A 0.77A
150W Open Circuit Voltage 257V 257V 257V 257V
Quartz
Drop Out Voltage 96V 166V 192V 222V
Metal Halide
Power Factor (>=) % 90 90 90 90
Min. Starting Temp (°F/°C) -22/-30 -22/-30 -22/-30 -22/-30
Fuse Rating 10 5 5 4 Safety and Performance cUL Listed UL Listed
UL Bench Top Rise A B A A

63078 - GEM175ML5AA3-5 For 20 – 175W Metal Halide HID Lamps

• Magnetic ballast construction ideal for a wide variety of lighting applications
Metal Halide • Precision-wound coils, ensuring even heat dissipation and the highest electrical integrity
• 5-tap ballast (120, 208, 240, 277, or 480 volt) featuring a 480-volt tap
1 – 175W MH M57 or M109 5-Tap (120/208/240/277/480V)
Dimensions
General Characteristics
Ballast Type Magnetic – Core and Coil Length (L) 5.3 in (133 mm)
ANSI Lamp Codes M57, H38, M109 Width (W) 1.3 in (33 mm)
Voltage 120/208/240/277/480 Mounting Dimensions
Line Voltage Regulation(+/-) 10%
Mount Length (M) 4.6 in (117 mm)
Circuit Type CWA
Mount Width (X or F)
Insulation Class 180° C
Type of Capacitor Oil filled Mount Slots (MS) 0.3 in (8 mm)
Capacitance 10 Mfd A 3.0
Voltage (MIN) 400 B 4.0
Capacitor Temperature Rating 100°C (212°F)
Weight 8.0 lbs
Exit Type Side
Electrical Characteristics
Supply Current Frequency 60 Hz Nominal Length 3.2 in (83 mm)
Electromagnetic HID Ballasts

Frame Size (H x L) 2.813 in x 3.939 in

Specifications by lamp and line voltage

Lamp Specifications by line voltage
120 208 240 277 480
System Wattage (W) 202 202 202 202 202
Nominal Current 1.70A 1.00A 0.90A 0.80A 0.40A
Ballast Factor 1 1 1 1 1
Ballast Efficiency Factor 0.87 0.87 0.87 0.87 0.87
Max Input Current 1.70A 1.00A 0.90A 0.80A 0.40A
M57, M109 Starting Current 0.60A 0.37A 0.32A 0.28A 0.21A
Open Circuit Voltage 307V 307V 307V 307V 307V
Drop Out Voltage 96V 166V 192V 222V 384V
Power Factor (>=) % 90 90 90 90 90
Min. Starting Temp (°F/°C) -22/-30 -22/-30 -22/-30 -22/-30 -22/-30
Fuse Rating
UL Bench Top Rise
5
D
3
C
3
C
2
C
1.5
C
Safety and Performance cUL Listed UL Listed

140 – www.LED.com/Lamps
Electromagnetic HID Ballasts
87211 – GEM250ML5AC3-5 • For 250 – 1500W Metal Halide HID Lamps
• Magnetic ballast construction ideal for a wide variety of lighting applications
Metal Halide • Precision-wound coils, ensuring even heat dissipation and the highest electrical integrity
• Distributor replacement kit contains the appropriate core and coil with color coded leads,
1 – 250W MH M58 5-Tap (120/208/240/277/480V) a properly rated capacitor and ignitor (if required) and all other components required for
ballast replacement
• 5-tap ballast (120, 208, 240, 277, or 480 volt) featuring a 480-volt tap

General Characteristics Dimensions

Ballast Type Magnetic – Core and Coil Length (L) 5.25 in (133 mm
ANSI Lamp Codes M58
Width (W) 1.25 in (32 mm)
Voltage 120/208/240/277/480
Mounting Dimensions
Line Voltage Regulation(+/-) 10%
Circuit Type CWA Mount Length (M) 4.6 in (117 mm)
Insulation Class 180° C Mount Width (X or F)
Type of Capacitor Oil Filled Mount Slots (MS) 0.25 in (6 mm)
Capacitance 15 Mfd GECAP-15/400V-O
A 3.0
Voltage (MIN) 400
B 4.3
Capacitor Temperature Rating 100°C (212°F)
GE Igniter Weight 9.0 lbs
Sound Rating Exit Type Side
Additional Info Nominal Length 3.2 in (83 mm)
Frame Size (H x L) 2.813 in x 3.939 in
Electrical Characteristics
Lead Lengths
Supply Current Frequency 60 Hz
Orange
Violet & Black
Violet/White
Black/Yellow

Specifications by lamp and line voltage

Lamp Specifications by line voltage
120 208 240 277 480
System Wattage (W) 280 280 280 280 280
Nominal Current 2.50A 1.40A 1.25A 1.10A 0.65A
Ballast Factor 1 1 1 1 1
Ballast Efficiency Factor 0.89 0.89 0.89 0.89 0.89
M58 Max Input Current 2.60A 1.60A 1.30A 1.20A 0.70A
250W Quartz Starting Current 1.50A 1.00A 0.80A 0.70A 0.50A
Metal Halide Open Circuit Voltage 290V 290V 290V 290V 290V
Drop Out Voltage 96V 166V 192V 222V 384V
Power Factor (>=) % 90 90 90 90 90
Min. Starting Temp (°F/°C) -22/-30 -22/-30 -22/-30 -22/-30 -22/-30
Fuse Rating 8 5 4 3 2
UL Bench Top Rise B B B C C

Electromagnetic HID Ballasts

Safety and Performance cUL Listed UL Listed

www.LED.com/Lamps – 141
 Electromagnetic HID Ballasts
72300 – GEM400ML5AA4-5/2 • For 250 – 1500W Metal Halide HID Lamps
• Magnetic ballast construction ideal for a wide variety of lighting applications
Metal Halide • Precision-wound coils, ensuring even heat dissipation and the highest electrical integrity
• Distributor replacement kit contains the appropriate core and coil with color coded leads,
1 – 400W M59 or H33 5-Tap (120/208/240/277/480V) A1 C&C a properly rated capacitor and ignitor (if required) and all other components required for
ballast replacement
• 5-tap ballast (120, 208, 240, 277, or 480 volt) featuring a 480-volt tap

General Characteristics Dimensions

Ballast Type Magnetic – Core and Coil Length (L) 5.25 in (133 mm
ANSI Lamp Codes M59
Width (W) 1.25 in (32 mm)
Voltage 120/208/240/277/480
Mounting Dimensions
Line Voltage Regulation(+/-) 10%
Circuit Type CWA Mount Length (M) 4.6 in (117 mm)
Insulation Class Class H, 180°C or Class N, 200°C Mount Width (X or F)
Type of Capacitor Oil Filled Mount Slots (MS) 0.25 in (6 mm)
Capacitance 24 Mfd GECAP-24/400V-O
A 2.17
Voltage (MIN) 450
B 3.90
Capacitor Temperature Rating 105°C (221°F)
GE Igniter Weight 10.8 lbs
Sound Rating Exit Type Side
Additional Info Nominal Length 3.7 in (95 mm)
Frame Size (H x L) 4.25 in x 4.75 in
Electrical Characteristics
Lead Lengths
Supply Current Frequency 60 Hz
Orange
Violet & Black
Violet/White
Black/Yellow

Specifications by lamp and line voltage

Lamp Specifications by line voltage
120 208 240 277 480
System Wattage (W) 461 461 461 461 461
Nominal Current 4.0A 2.3A 2.0A 1.75A 1.00A
Ballast Factor 1 1 1 1 1
Ballast Efficiency Factor 0.86 0.86 0.86 0.86 0.86
M59
400W Quartz Max Input Current 4.0A 2.3A 2.0A 1.75A 1.00A
Metal Halide Starting Current 3.90A 3.90A 3.90A 3.90A 3.90A
360W Quartz Open Circuit Voltage 300V 300V 300V 300V 300V
Metal Halide
Drop Out Voltage 580V 580V 580V 580V 580V
Power Factor (>=) % 90 90 90 90 90
Min. Starting Temp (°F/°C) -22/-30 -22/-30 -22/-30 -22/-30 -22/-30
Fuse Rating 8 5 4 3 2
UL Bench Top Rise D or A D or A D or A D or A D or A
Electromagnetic HID Ballasts

Safety and Performance cUL Listed UL Listed

142 – www.LED.com/Lamps
Electromagnetic HID Ballasts
87213 – GEM1000ML5AA5-5/2 • For 250 – 1500W Metal Halide HID Lamps
• Magnetic ballast construction ideal for a wide variety of lighting applications
Metal Halide • Precision-wound coils, ensuring even heat dissipation and the highest electrical integrity
• Distributor replacement kit contains the appropriate core and coil with color coded leads,
1 – 1000W MH M47 5-Tap (120/208/240/277/480V) a properly rated capacitor and ignitor (if required) and all other components required for
ballast replacement
• 5-tap ballast (120, 208, 240, 277, or 480 volt) featuring a 480-volt tap

General Characteristics Dimensions

Ballast Type Magnetic – Core and Coil Length (L) 7.75 in (197 mm
ANSI Lamp Codes M47
Width (W) 2.75 in (70 mm)
Voltage 120/208/240/277/480
Mounting Dimensions
Line Voltage Regulation(+/-) 10%
Circuit Type CWA Mount Length (M) 6.1 in (155 mm)
Insulation Class Class H, 180°C or Class N, 200°C Mount Width (X or F)
Type of Capacitor Oil Filled Mount Slots (MS) 0.25 in (6 mm)
Capacitance 24 Mfd GECAP-24/480V-O
A 3.0
Voltage (MIN) 480
B 5.0
Capacitor Temperature Rating 105°C (221°F)
GE Igniter Weight 21.0 lbs
Sound Rating Exit Type Side
Additional Info Nominal Length 3.7 in (95 mm)
Frame Size (H x L) 4.25 in x 6.00 in
Electrical Characteristics
Lead Lengths
Supply Current Frequency 60 Hz
Orange
Violet & Black
Violet/White
Black/Yellow

Specifications by lamp and line voltage

Lamp Specifications by line voltage
120 208 240 277 480
System Wattage (W) 1,050 1,050 1,050 1,050 1,050
Nominal Current 9.00A 5.20A 4.50A 3.90A 2.25A
Ballast Factor 1 1 1 1 1
Ballast Efficiency Factor 0.91 0.91 0.91 0.91 0.91
M47 Max Input Current 9.00A 5.20A 4.50A 3.90A 2.25A
1000W Quartz Starting Current 5.60A 5.60A 5.60A 5.60A 5.60A
Metal Halide Open Circuit Voltage 415V 415V 415V 415V 415V
Drop Out Voltage 96V 166V 192V 222V 384V
Power Factor (>=) % 90 90 90 90 90
Min. Starting Temp (°F/°C) -22/-30 -22/-30 -22/-30 -22/-30 -22/-30
Fuse Rating 18 10 9 7 5
UL Bench Top Rise D or A D or A D or A D or A D or A

Electromagnetic HID Ballasts

Safety and Performance cUL Listed UL Listed

www.LED.com/Lamps – 143
 Electromagnetic HID Ballasts
86693 – GEM150048TAC5M5-5 • For 250 – 1500W Metal Halide HID Lamps
• Magnetic ballast construction ideal for a wide variety of lighting applications
Metal Halide • Precision-wound coils, ensuring even heat dissipation and the highest electrical integrity
• Distributor replacement kit contains the appropriate core and coil with color coded leads,
1 – 1500W MH M48 480 a properly rated capacitor and ignitor (if required) and all other components required for
ballast replacement

General Characteristics Dimensions

Ballast Type Magnetic – Core and Coil Length (L) 7.75 in (197 mm
ANSI Lamp Codes M48
Width (W) 2.75 in (70 mm)
Voltage 480
Mounting Dimensions
Line Voltage Regulation(+/-) 10%
Circuit Type CWA Mount Length (M) 6.1 in (155 mm)
Insulation Class 180°C Mount Width (X or F)
Type of Capacitor Oil Filled Mount Slots (MS) 0.25 in (6 mm)
Capacitance 32 Mfd GECAP-32/525V-O
A 4.0
Voltage (MIN) 525
B 6.0
Capacitor Temperature Rating 100°C (212°F)
GE Igniter Weight 30.0 lbs
Sound Rating Exit Type Side
Additional Info Nominal Length 5.2 in (133 mm)
Frame Size (H x L) 4.25 in x 6.00 in
Electrical Characteristics
Supply Current Frequency 60 Hz

Specifications by lamp and line voltage

Lamp Specifications by line voltage
480
System Wattage (W) 1,581
Nominal Current 3.10A
Ballast Factor 1
Ballast Efficiency Factor 0.95
M48 Max Input Current 3.10A
1500W Quartz Starting Current 3.18A
Metal Halide Open Circuit Voltage 449V
Drop Out Voltage 384V
Power Factor (>=) % 90
Min. Starting Temp (°F/°C) -22/-30
Fuse Rating 10
UL Bench Top Rise G
Electromagnetic HID Ballasts

Safety and Performance cUL Listed UL Listed

144 – www.LED.com/Lamps
Electromagnetic HID Ballasts
86698 – GEM1500MLTAC5-5 • For 250 – 1500W Metal Halide HID Lamps
• Magnetic ballast construction ideal for a wide variety of lighting applications
Metal Halide • Precision-wound coils, ensuring even heat dissipation and the highest electrical integrity
• Distributor replacement kit contains the appropriate core and coil with color coded leads,
1 – 1500W MH M48 Quad (120/208/240/277V) a properly rated capacitor and ignitor (if required) and all other components required for
ballast replacement
• Quad ballast (120, 208, 240, 277)

General Characteristics Dimensions

Ballast Type Magnetic – Core and Coil Length (L) 7.75 in (197 mm
ANSI Lamp Codes M48
Width (W) 2.75 in (70 mm)
Voltage 240/277
Mounting Dimensions
Line Voltage Regulation(+/-) 10%
Circuit Type CWA Mount Length (M) 6.1 in (155 mm)
Insulation Class 180°C Mount Width (X or F)
Type of Capacitor Oil Filled Mount Slots (MS) 0.25 in (6 mm)
Capacitance 32 Mfd GECAP-32/525V-O
A 4.0
Voltage (MIN) 525
B 6.0
Capacitor Temperature Rating 100°C (212°F)
GE Igniter Weight 30.0 lbs
Sound Rating Exit Type Side
Additional Info Nominal Length 5.2 in (133 mm)
Frame Size (H x L) 4.25 in x 6.00 in
Electrical Characteristics
Supply Current Frequency 60 Hz

Specifications by lamp and line voltage

Lamp Specifications by line voltage
120 208 240 277
System Wattage (W) 1,602 1,602 1,602 1,602
Nominal Current 13.70A 7.70A 6.80A 6.00A
Ballast Factor 1 1 1 1
Ballast Efficiency Factor 0.94 0.94 0.94 0.94
M48 Max Input Current 13.70A 7.70A 6.80A 6.00A
1500W Quartz Starting Current 12.95A 7.46A 6.52A 5.75A
Metal Halide Open Circuit Voltage 440V 440V 440V 440V
Drop Out Voltage 96V 166V 192V 222V
Power Factor (>=) % 90 90 90
Min. Starting Temp (°F/°C) -22/-30 -22/-30 -22/-30 -22/-30
Fuse Rating 40 25 20 20
UL Bench Top Rise A A A A

Electromagnetic HID Ballasts

Safety and Performance cUL Listed UL Listed

www.LED.com/Lamps – 145
 Electromagnetic HID Ballasts
67345 – GEP320MLTAA4-5/2 • For 175 – 1000W Pulse Start Metal Halide HID Lamps
• Magnetic ballast construction ideal for a wide variety of lighting applications
Pulse Start • Precision-wound coils, ensuring even heat dissipation and the highest electrical integrity
• Distributor replacement kit contains the appropriate core and coil with color coded leads,
1 – 320W PS M132 or 154 Quad (120/208/240/277V) a properly rated capacitor and ignitor (if required) and all other components required for
ballast replacement
• Quad ballast (120, 208, 240, 277)

General Characteristics Dimensions

Ballast Type Magnetic – Core and Coil Length (L) 5.25 in (133 mm
ANSI Lamp Codes M154, M132
Width (W) 1.25 in (32 mm)
Voltage 120/208/240/277
Mounting Dimensions
Line Voltage Regulation(+/-) 10%
Circuit Type CWA Mount Length (M) 4.6 in (117 mm)
Insulation Class Class H, 180°C or Class N, 200°C Mount Slots (MS) Mount Width (X or F) 0.25 in (6 mm)
Type of Capacitor Oil Filled A 1.89
Capacitance 21 Mfd GECAP-21/345V-O B 3.60
Voltage (MIN) 370
Weight 9.50 lbs
Capacitor Temperature Rating 105°C (221°F)
GE Igniter MH350-1A Exit Type Side
Sound Rating Nominal Length 3.7 in (95 mm)
Additional Info Frame Size (H x L) 4.25 in x 4.75 in

Electrical Characteristics
Supply Current Frequency 60 Hz

Specifications by lamp and line voltage

Lamp Specifications by line voltage
120 208 240 277
System Wattage (W) 370 370 370 370
Nominal Current 3.10A 1.80A 1.55A 1.34A
Ballast Factor 1 1 1 1
Ballast Efficiency Factor 0.86 0.86 0.86 0.86
M48 Max Input Current 3.10A 1.80A 1.55A 1.34A
1500W Quartz Starting Current 3.20A 3.20A 3.20A 3.20A
Metal Halide Open Circuit Voltage 270V 270V 270V 270V
Drop Out Voltage 540V 540V 540V 540V
Power Factor (>=) % 90 90 90 90
Min. Starting Temp (°F/°C) -20/-30 -20/-30 -20/-30 -20/-30
Fuse Rating 7 4 3 3
UL Bench Top Rise A or B A or C A or C A or C
Electromagnetic HID Ballasts

Safety and Performance cUL Listed UL Listed

146 – www.LED.com/Lamps
Electromagnetic HID Ballasts
67347 – GEP400MLTAA4-5/2 • For 175 – 1000W Pulse Start Metal Halide HID Lamps
• Magnetic ballast construction ideal for a wide variety of lighting applications
Pulse Start • Precision-wound coils, ensuring even heat dissipation and the highest electrical integrity
• Distributor replacement kit contains the appropriate core and coil with color coded leads,
1 – 400W PS M135/M155 Quad (120/208/240/277V) a properly rated capacitor and ignitor (if required) and all other components required for
ballast replacement
• Quad ballast (120, 208, 240, 277)

General Characteristics Dimensions

Ballast Type Magnetic – Core and Coil Length (L) 5.25 in (133 mm
ANSI Lamp Codes M135/M155
Width (W) 1.25 in (32 mm)
Voltage 120/208/240/277
Mounting Dimensions
Line Voltage Regulation(+/-) 10%
Circuit Type CWA Mount Length (M) 4.6 in (117 mm)
Insulation Class Class H, 180°C or Class N, 200°C Mount Width (X or F)
Type of Capacitor Oil Filled Mount Slots (MS) 0.25 in (6 mm)
Capacitance 24 Mfd GECAP-24/400V-O
A 2.17
Voltage (MIN) 450
B 3.90
Capacitor Temperature Rating 105°C (221°F)
GE Igniter MH350-1A Weight 10.80 lbs
Sound Rating Exit Type Side
Additional Info Nominal Length 4.6 in (119 mm)
Frame Size (H x L) 4.25 in x 4.75 in
Electrical Characteristics
Supply Current Frequency 60 Hz

Specifications by lamp and line voltage

Lamp Specifications by line voltage
120 208 240 277
System Wattage (W) 457 457 457 457
Nominal Current 4.00A 2.30A 2.00A 1.75A
Ballast Factor 1 1 1 1
Ballast Efficiency Factor 0.87 0.87 0.87 0.87
Max Input Current 4.00A 2.30A 2.00A 1.75A
M135/M155 Starting Current 3.80A 3.80A 3.80A 3.80A
Open Circuit Voltage 300V 300V 300V 300V
Drop Out Voltage 580V 580V 580V 580V
Power Factor (>=) % 90 90 90 90
Min. Starting Temp (°F/°C) -20/-30 -20/-30 -20/-30 -20/-30
Fuse Rating 8 5 4 3
UL Bench Top Rise A or D A or D A or D A or D

Electromagnetic HID Ballasts

Safety and Performance cUL Listed UL Listed

www.LED.com/Lamps – 147
 Electromagnetic HID Ballasts
87094 – GES150MLTLC3D-5 • For 50 – 150W High Pressure Sodium HID Lamps
• Magnetic ballast construction ideal for a wide variety of lighting applications
High Pressure Sodium • Precision-wound coils, ensuring even heat dissipation and the highest electrical integrity
• Distributor replacement kit contains the appropriate core and coil with color coded leads,
1 – 150W HPS S55 Quad (120/208/240/277V) a properly rated capacitor and ignitor (if required) and all other components required for
ballast replacement
• Quad ballast (120, 208, 240, 277)

General Characteristics Dimensions

Ballast Type Magnetic – Core and Coil Length (L) 5.25 in (133 mm
ANSI Lamp Codes S55
Width (W) 1.25 in (32 mm)
Voltage 120/208/240/277
Mounting Dimensions
Line Voltage Regulation(+/-) 5%
Circuit Type HX-HPF Mount Length (M) 4.6 in (117 mm)
Insulation Class 180° C Mount Width (X or F)
Type of Capacitor Dry Film Mount Slots (MS) 0.25 in (6 mm)
Capacitance 14 Mfd GECAP-14/280V-D
A 3.0
Voltage (MIN) 280
B 4.0
Capacitor Temperature Rating 100°C (212°F)
GE Igniter HPS150-3A Weight 7.60 lbs
Sound Rating Exit Type Side
Additional Info Nominal Length 2.7 in (69 mm)
Frame Size (H x L) 2.813 in x 3.939 in
Electrical Characteristics
Supply Current Frequency 60 Hz

Specifications by lamp and line voltage

Lamp Specifications by line voltage
120 208 240 277
System Wattage (W) 175 175 175 175
Nominal Current 1.60A 0.90A 0.80A 0.70A
Ballast Factor 1 1 1 1
S55 Ballast Efficiency Factor 1.43 1.43 1.43 1.43
150W High Max Input Current 2.72A 1.53A 1.34A 1.16A
Pressure
Starting Current 1.64A 0.88A 0.76A 0.65A
Sodium
250W Quartz Open Circuit Voltage 115V 115V 115V 115V
Metal Halide Drop Out Voltage 96V 166V 192V 222V
Power Factor (>=) % 90 90 90 90
Min. Starting Temp (°F/°C) -22/-30 -22/-30 -22/-30 -22/-30
Fuse Rating 10 5 5 5
UL Bench Top Rise B B B B
Electromagnetic HID Ballasts

Safety and Performance cUL Listed UL Listed

148 – www.LED.com/Lamps
Electromagnetic HID Ballasts
87214 – GES250ML5AA4-5 • For 250 – 1000W High Pressure Sodium HID Lamps
• Magnetic ballast construction ideal for a wide variety of lighting applications
High Pressure Sodium • Precision-wound coils, ensuring even heat dissipation and the highest electrical integrity
• Distributor replacement kit contains the appropriate core and coil with color coded leads,
1 – 250W HPS S50 5-Tap (120/208/240/277/480V) a properly rated capacitor and ignitor (if required) and all other components required for
ballast replacement
• 5-tap ballast (120, 208, 240, 277, or 480 volt) featuring a 480-volt tap

General Characteristics Dimensions

Ballast Type Magnetic – Core and Coil Length (L) 5.25 in (133 mm
ANSI Lamp Codes S50
Width (W) 1.25 in (32 mm)
Voltage 120/208/240/277/480
Mounting Dimensions
Line Voltage Regulation(+/-) 10%
Circuit Type CWA Mount Length (M) 4.6 in (117 mm)
Insulation Class 180°C Mount Width (X or F)
Type of Capacitor Oil Filled Mount Slots (MS) 0.25 in (6 mm)
Capacitance 35 Mfd GECAP-35/240V-O
A 2.0
Voltage (MIN) 240
B 4.0
Capacitor Temperature Rating 100°C (212°F)
GE Igniter HPS400-3A Weight 12.0 lbs
Sound Rating Exit Type Side
Additional Info Nominal Length 3.7 in (95 mm)
Frame Size (H x L) 4.25 in x 4.75 in
Electrical Characteristics
Lead Lengths
Supply Current Frequency 60 Hz
Orange
Violet & Black
Violet/White
Black/Yellow

Specifications by lamp and line voltage

Lamp Specifications by line voltage
120 208 240 277 480
System Wattage (W) 292 292 292 292 292
Nominal Current 2.50A 1.50A 1.30A 1.10A 0.60A
Ballast Factor 1 1 1 1 1
Ballast Efficiency Factor 0.86 0.86 0.86 0.86 0.86
S50 Max Input Current 2.50A 1.50A 1.30A 1.10A 0.60A
250W High
Starting Current 1.59A 0.93A 0.81A 0.70A 0.40A
Pressure
Sodium Open Circuit Voltage 186V 186V 186V 186V 186V
Drop Out Voltage 96V 166V 192V 222V 384V
Power Factor (>=) % 90 90 90 90 90
Min. Starting Temp (°F/°C) -22/-30 -22/-30 -22/-30 -22/-30 -22/-30
Fuse Rating 8 5 4 4 4
UL Bench Top Rise C C B B B

Electromagnetic HID Ballasts

Safety and Performance cUL Listed UL Listed

www.LED.com/Lamps – 149
 Electromagnetic HID Ballasts
63066 – GES400ML5AA4-5 (replaces 87215) • For 250 – 1000W High Pressure Sodium HID Lamps
• Magnetic ballast construction ideal for a wide variety of lighting applications
High Pressure Sodium • Precision-wound coils, ensuring even heat dissipation and the highest electrical integrity
• Distributor replacement kit contains the appropriate core and coil with color coded leads,
1 – 400W HPS S51 5-Tap (120/208/240/277/480V) a properly rated capacitor and ignitor (if required) and all other components required for
ballast replacement
• 5-tap ballast (120, 208, 240, 277, or 480 volt) featuring a 480-volt tap

General Characteristics Dimensions

Ballast Type Magnetic – Core and Coil Length (L) 5.25 in (133 mm
ANSI Lamp Codes S51
Width (W) 1.25 in (32 mm)
Voltage 120/208/240/277/480
Mounting Dimensions
Line Voltage Regulation(+/-) 10%
Circuit Type CWA Mount Length (M) 4.6 in (117 mm)
Insulation Class 180°C Mount Width (X or F)
Type of Capacitor Oil Filled Mount Slots (MS) 0.25 in (6 mm)
Capacitance 55 Mfd GECAP-55/240V-O
A 2.0
Voltage (MIN) 240
B 4.0
Capacitor Temperature Rating 100°C (212°F)
GE Igniter HPS400-3A 86641 Weight 15.0 lbs
Sound Rating Exit Type Side
Additional Info Nominal Length 4.2 in (108 mm)
Frame Size (H x L) 4.25 in x 4.75 in
Electrical Characteristics
Lead Lengths
Supply Current Frequency 60 Hz
Orange
Violet & Black
Violet/White
Black/Yellow

Specifications by lamp and line voltage

Lamp Specifications by line voltage
120 208 240 277 480
System Wattage (W) 472 472 472 472 472
Nominal Current 4.00A 2.20A 2.00A 1.70A 1.00A
Ballast Factor 1 1 1 1 1
Ballast Efficiency Factor 0.85 0.85 0.85 0.85 0.85
S51 Max Input Current 4.00A 2.20A 2.00A 1.70A 1.00A
400W High
Starting Current 2.87A 1.66A 1.44A 1.25A 0.72A
Pressure
Sodium Open Circuit Voltage 191V 191V 191V 191V 191V
Drop Out Voltage 96V 166V 192V 222V 384V
Power Factor (>=) % 90 90 90 90 90
Min. Starting Temp (°F/°C) -22/-30 -22/-30 -22/-30 -22/-30 -22/-30
Fuse Rating 15 8 8 5 5
UL Bench Top Rise C C C C C
Electromagnetic HID Ballasts

Safety and Performance cUL Listed UL Listed

150 – www.LED.com/Lamps
Electromagnetic HID Ballasts
87218 – GES1000ML5AA5-5 • For 250 – 1000W High Pressure Sodium HID Lamps
• Magnetic ballast construction ideal for a wide variety of lighting applications
High Pressure Sodium • Precision-wound coils, ensuring even heat dissipation and the highest electrical integrity
• Distributor replacement kit contains the appropriate core and coil with color coded leads,
1 – 1000W HPS S52 5-Tap (120/208/240/277/480V) a properly rated capacitor and ignitor (if required) and all other components required for
ballast replacement
• 5-tap ballast (120, 208, 240, 277, or 480 volt) featuring a 480-volt tap

General Characteristics Dimensions

Ballast Type Magnetic – Core and Coil Length (L) 7.75 in (197 mm
ANSI Lamp Codes S52
Width (W) 2.75 in (70 mm)
Voltage 120/208/240/277/480
Mounting Dimensions
Line Voltage Regulation(+/-) 10%
Circuit Type CWA Mount Length (M) 6.1 in (155 mm)
Insulation Class 180°C Mount Width (X or F)
Type of Capacitor Oil Filled Mount Slots (MS) 0.25 in (6 mm)
Capacitance 26 Mfd GECAP-26/525V-O
A 4.0
Voltage (MIN) 525
B 6.0
Capacitor Temperature Rating 100°C (212°F)
GE Igniter HPS1000-4B Weight 28.0 lbs
Sound Rating Exit Type Side
Additional Info Nominal Length 4.7 in (121 mm)
Frame Size (H x L) 4.25 in x 6.00 in
Electrical Characteristics
Lead Lengths
Supply Current Frequency 60 Hz
Orange
Violet & Black
Violet/White
Black/Yellow

Specifications by lamp and line voltage

Lamp Specifications by line voltage
120 208 240 277 480
System Wattage (W) 1,102 1,102 1,102 1,102 1,102
Nominal Current 9.50A 5.50A 4.70A 4.10A 2.40A
Ballast Factor 1 1 1 1 1
Ballast Efficiency Factor 0.91 0.91 0.91 0.91 0.91
S52 Max Input Current 9.50A 5.50A 4.70A 4.10A 2.40A
1000W High
Starting Current 5.75A 3.40A 2.90A 2.60A 1.80A
Pressure
Sodium Open Circuit Voltage 435V 435V 435V 435V 435V
Drop Out Voltage 96V 166V 192V 222V 384V
Power Factor (>=) % 90 90 90 90 90
Min. Starting Temp (°F/°C) -22/-30 -22/-30 -22/-30 -22/-30 -22/-30
Fuse Rating 20 15 10 10 8
UL Bench Top Rise D D D D D

Electromagnetic HID Ballasts

Safety and Performance cUL Listed UL Listed

www.LED.com/Lamps – 151
 APPENDIX
Lamp Size/Diameter
The diameter of a lamp, at its maximum dimension,
is expressed in eighths of an inch. Examples: The
diameter of an A19 lamp is 19-eighths of an inch, or
2-3/8", at its widest point. A T8 lamp has a diameter
of 8-eighths, or one inch.

Important Notice
This catalog is a compilation of accumulated
data. Additional information is constantly being
uncovered through research and testing,
which may modify the data given herein. This
is particularly true of newer lamps and ballasts.
Accordingly, SPECIFICATIONS ARE SUBJECT TO
CHANGE WITHOUT NOTICE. For the latest lamp
and ballast design data and information, contact
your Current representative.

The data and suggested applications contained in

this catalog, as well as any additional information
our representative may be able to furnish, are for
general information only and are not intended
and should not be taken as representations or
warranties as to the suitability of a lamp or ballast
for any particular application or use in any particular
equipment, nor are our representatives authorized
to make any such warranties. Applications and
conditions of use are many and varied, and beyond
our control. We cannot possibly have the same
degree of knowledge that the purchaser has
with respect to the design of his equipment and
the conditions of its use. Therefore, it is up to the
purchaser to make its own determination as to
the suitability of a lamp or ballast for his intended
application or use and to assume the responsibility
for that determination.

Current desires to supply the best possible

products at all times. For this reason, Current
reserves the right to make changes in its products
and to introduce new products or discontinue
existing ones without notice.
Appendix

152 – www.LED.com/Lamps
GLOSSARY OF TERMS
Ambient Temperature Candela (cd) Efficiency (Continued)
Ambient temperature which refers to the The measure of luminous intensity of a source in a percentage of the lamp lumens that actually
temperature inside the fixture in the air given direction. The term has been retained from comes out of the fixture (see LUMINAIRE EFFICIENCY).
surrounding the fluorescent lamp or LED. the early days of lighting when a standard candle
Fluorescent lamp light output and LED life are of a fixed size and composition was defined as Electromagnetic Spectrum
affected by the ambient temperature. producing one candela in every direction. A plot A continuum of electric and magnetic radiation
of intensity versus direction is called a candela that can be characterized by wavelength or
Amperes distribution curve and is often provided for frequency. Visible light encompasses a small
("Amps") A measure of electrical current. In reflectorized lamps and for luminaires with a part of the electromagnetic spectrum in the
incandescent lamps, the current is related to lamp operating in them. region from about 380 nanometers (violet) to 770
voltage and power as follows: Watts (power) = nanometers (red) by wavelength.
Volts x Amps (current). Candlepower
An obsolete term for luminous intensity; current Electromagnetic Interference (EMI)
ANSI (American National Standards Institute) practice is to refer to this simply as candelas High-frequency electronic ballasts and other
A consensus-based organization which (see CANDELA). electronic devices can produce a small amount
coordinates voluntary standards for the physical, of radio waves that can interfere with radio and
electrical and performance characteristics of Center Beam Candlepower (CBCP) TV. Federally-mandated requirements must be
lamps, ballasts, luminaires and other lighting and Refers to the luminous intensity at the center of met for EMI levels before an electronic device
electrical equipment. the beam of a blown or pressed reflector lamp is considered FCC compliant (FCC is the Federal
(such as a PAR lamp). Measured in candelas Communications Commission).
ANSI Ballast Type (see CANDELA).
A reference to the ANSI document describing the Federal Communications Commission (FCC)
lamp which also lists the characteristics of the Color Rendering Index (CRI) The U. S. federal agency that regulates
ballast required to operate the lamp. Technically, A measure of the ability of a light source to emissions in the radio frequency portion of the
therefore, it is incorrect to refer to "Ballast Type" render object colors faithfully in comparison with electromagnetic spectrum. Part 18 of the FCC
with the ANSI code but this misuse is common. a designated standard light source. Incandescent rules specifies electromagnetic interference
The following naming system is used: H – mercury objects and daylight are both considered (EMI) from lighting devices at frequencies greater
lamps; M – metal halide lamps; S – high pressure "standard" sources. Note that "standard" is than 450 kilohertz (kHz). A consumer-rated Class B
sodium lamps; L – low pressure sodium lamps. defined for convenience in reproducibility rather ballast is designed for use in the home
than being based on user preference. near TV and radio receivers. It produces less
Ballast electrical noise that could interfere with consumer
An auxiliary piece of equipment required to start Color Temperature (Correlated Color products. A Class A-rated ballast is designed for
and to properly control the flow of current to gas Temperature – CCT) use in commercial and industrial applications that
discharge light sources such as fluorescent and A number indicating the degree of "yellowness" are not in the vicinity of TV and radio receivers.
high intensity discharge (HID) lamps. Typically, or "blueness" of a white light source. Measured
magnetic ballasts (also called electromagnetic in Kelvins, CCT represents the temperature an Field Angle
ballasts) contain copper windings on an iron core incandescent object (like a filament) must reach The angular dimension of the cone of light from
while electronic ballasts are smaller and more to mimic the color of the lamp. Yellowish-white reflectorized lamps (such as R and PAR types)
efficient and contain electronic components. ("warm") sources, like incandescent lamps, have encompassing the central part of the beam out to
lower color temperatures in the 2700K–3000K the angle where the intensity is 10% of maximum
Ballast Efficacy Factor (BEF) range; white and bluish-white ("cool") sources, (see BEAM ANGLE).
Defined as ballast factor x 100 divided by input such as cool white (4100K) and natural daylight
watts. The value is used to evaluate various (6000K), have higher color temperatures. The Footcandle (fc)
lighting systems based on light output and power higher the color temperature the whiter, or bluer, A unit of illuminance or light falling onto a surface.
input. The BEF can only be used to compare the light will be. It stands for the light level on a surface one foot
systems operating the same type and quantity from a standard candle. One footcandle is equal
of lamps. Crest Factor (Lamp Current Crest Factor) to one lumen per square foot (see LUX).
Ratio of peak to RMS for any AC waveform. Crest
Ballast Factor (BF) factor can refer to voltage crest factor or current Frequency
This is the percentage of a lamp's rated lumen crest factor. Rate of alternation in an AC current. Expressed in
output that can be expected when operated on a cycles per second or Hertz (Hz).
specific, commercially available ballast. Note that Current Type (AC/DC)
the "rated output" is sometimes measured on a Whether the operational voltage is based on Glare
reference ballast unlike ones that actually operate Alternating Current or Direct Current. Visual discomfort caused by excessive brightness
the lamp in the field. For example, a ballast with is called discomfort glare. If task performance is
a ballast factor of 0.93 will result in the lamp's Efficacy affected it is called disability glare. Glare can be
emitting 93% of its rated lumen output. A ballast A measurement of how effective the light source direct glare or indirect (reflected) glare.
with a lower BF results in less light output and is in converting electrical energy to lumens of
also generally consumes less power. visible light. Expressed in lumens-per-watt (LPW), Harmonic
this measure gives more weight to the yellow An integral multiple of the fundamental frequency
Beam Angle region of the spectrum and less weight to the (60 Hz) that becomes a component of the current.
The angular dimension of the cone of light from blue and red regions where the eye is not as Harmonic Distortion (see TOTAL HARMONIC
reflectorized lamps (such as R and PAR types) sensitive. The efficiency of a light source is simply DISTORTION or THD).
encompassing the central part of the beam out to the fraction of electrical energy converted to light,
the angle where the intensity is 50% of maximum. i.e. watts of visible light produced for each watt Hertz (Hz)
The beam angle (sometimes called "beam of electrical power with no concern about the Unit used to measure frequency of alteration of
spread") is often part of the ordering code for wavelength where the energy is being radiated. current or voltage, in cycles per second.
reflectorized lamps. Example: The 50PAR30/HIR/ For example, a 100-watt incandescent lamp
NFL25 is a 50 watt PAR30 narrow flood lamp with converts 7% of the electrical energy into light; Ignitor
Glossary of Terms

a beam angle of 25 degrees, i.e. 12.5 degrees on discharge lamps convert 25% to 40% into light. An electronic device providing a high voltage
either side of the center (see FIELD ANGLE). pulse to initiate an electrical discharge. Typically,
Efficiency the ignitor is paired with or is a part of the ballast.
Bi-Pin The efficiency of a light source is simply the
Any base with two metal pins for electrical fraction of electrical energy converted to light, Illuminance
contact. This is the typical base for a fluorescent i.e. watts of visible light produced for each watt The "density" of light (lumens/area) incident
tube of 1 to 4 feet in length. It consists of 2 prong of electrical power with no concern about the on a surface; i.e. the light level on a surface.
contacts that connect into the fixture. Medium wavelength where the energy is being radiated. Illuminance is measured in footcandles or lux.
bi-pins are used with type T-8 and T-12 tubular For example, a 100-watt incandescent lamp
fluorescent lamps and miniature bi-pins are used converts 7% of the electrical energy into light; Input Voltage
for tubular T-5 fluorescent lamps. discharge lamps convert 25% to 40% into light. Power supply voltage required for proper
The efficiency of a luminaire or fixture is the operation of fluorescent or HID ballast.

www.LED.com/Lamps – 153
 GLOSSARY OF TERMS
Input Watts Lumen Photopic (see SCOTOPIC/PHOTOPIC).
The total power input to the ballast that includes A measure of luminous flux or quantity of light emitted
lamp watts and ballast losses. The total power by a source. Power Factor (PF)
input to the fixture is the input watts to the ballast A measure of the phase difference between voltage
or ballasts and is the value to be used when Lumen Depreciation, Lumen Maintenance and current drawn by an electrical device, such as a
calculating cost of energy and air conditioning A measure of how well a lamp maintains its light ballast or motor. Power factors can range from 0 to
loads. More than 90% of the input watts is output over time. It may be expressed numerically 1.0 with 1.0 being ideal. Power factor is sometimes
wattage or power delivered to the lamp load with or as a graph of light output vs. time. The "mean expressed as a percent. Incandescent lamps have
typical ballast. lumens" of a lamp is the lumens at 40% of rated power factors close to 1.0 because they are simple
life (50% for HPS lamp). "resistive" loads. The power factor of a fluorescent and
Instant Start HID lamp system is determined by the ballast used.
A type of ballast designed to start fluorescent Lumens Per Watt (LPW) "High" power factor usually means a rating of 0.9 or
lamps as soon as the power is applied. Most A ratio expressing the luminous efficacy of a light greater. Power companies may penalize users for
T8 fluorescent lamps are being operated on source. using low-power-factor devices.
electronic instant-start ballasts. Slimline
fluorescent lamps operate only on instant- Luminance Preheat Circuit
start circuits. A photometric measure of "brightness" of a A type of fluorescent lamp-ballast circuit used with the
surface as seen by the observer, measured in first commercial fluorescent lamp products. A push
Kelvins (see COLOR TEMPERATURE). candelas per square meter. button or automatic switch is used to preheat the lamp
cathodes. Starting the lamp can then be accomplished
L70, L85, etc. Luminous Efficacy using simple "choke" or reactor ballasts. A preheat
L70 (or L85, etc.): The elapsed operating time The light output (lumens) of a light source divided by the fluorescent lamp is one in which the filament must be
over which a population of LED light sources total power input (watts) to that source. It is expressed in heated by use of a starter before the arc is created.
will maintain 70% (or 85%) of its initial light lumens per watt (see LUMENS PER WATT). These lamps are typically operated with
output. This 70% number represents the electromagnetic ballasts.
expected median light output (which is close to Lux (lx)
the average light output) of the tested LED light A unit of illuminance or light falling onto a Programmed Rapid Start
source population. The value is often stated using surface. Lux stands for the light level on a surface Lamp starting method which preheats the lamp
the form L70(10K)= 50,000 Hours; this means one meter from a standard candle. One lux is filaments while not allowing the lamp to ignite and
that the LED light source's median light output
equal to one lumen per square meter. Ten then applies the open circuit voltage (OCV) to start the
reaches 70% of the initial light output at 50,000
lux approximately equals one footcandle lamp. The user may experience a half- to one-second
Hours based on 10,000 hours of test data using
(see FOOTCANDLE). delay after turning on the lamps while the preheating
TM-21 projection methods. When the L70 value
is stated as "Reported" it means that tests have takes place. This type of starting circuit keeps lamp
gone to at least 1/6th of the reported time as Maximum Overall Length (M.O.L.) end blackening to a minimum and improves lamp life
required by IESNA's TM-21 methodology. On the The end-to-end measurement of a lamp, performance, especially in applications where the
other hand, manufacturers will sometimes state expressed in inches or millimeters. lamps are frequently switched on and off.
a "Calculated" value of L70 which means they are
using mathematical curve fitting and projection Mean Lumens Pulse Start
methods of TM-21 to project beyond 6 times the The average light output of a lamp over its rated A lamp that requires an HID ballast with a high-
available test hours. life. Based on the shape of the lumen depreciation voltage ignitor to start the lamp.
curve, for fluorescent and metal halide lamps,
Lamp Watts mean lumens are measured at 40% of rated Rapid Start
Power dissipated in the lamp—some of which lamp life. For mercury, high-pressure sodium Lamp starting method in which lamp filaments
is converted to light, some to heat and some and incandescent lamps, mean lumen ratings are heated while open circuit voltage (OCV) is
to ultraviolet. refer to lumens at 50% of rated lamp life (see applied to facilitate lamp ignition. A Rapid Start
LUMEN MAINTENANCE). fluorescent lamp has two pins at each end
LED connected to the filament. Some rapid start
Light Emitting Diode used as the primary light Medium Base lamps may be instant-started without filament
source in a wide array of LED lighting products. Also Usually refers to the screw base typically used in heat, for example, the F32T8 lamp.
referred to as SSL (Solid State Lighting). household incandescent lamps. There is also the
medium bi-pin base commonly used in T12 and Rated Lamp Life
LED Tube Beam Angle T8 fluorescent lamps. For most lamp types, rated lamp life is the length
The angle between the two opposite directions in of time of a statistically large sample between first
which the average intensity is 50% of the center Mogul Base use and the point when 50% of the lamps have
beam intensity as measured in the azimuthal plane A screw base used on larger lamps, e.g. many HID lamps. died (see L70 for LED Lamps).
perpendicular to and at the center of the linear
replacement lamp axis. PAR Lamp Reflector Lamp (R)
PAR is an acronym for parabolic aluminized reflector. A light source with a built-in reflecting surface.
Life (see RATED LAMP LIFE). A PAR lamp, which may utilize either an incandescent Sometimes, the term is used to refer specifically to
filament, a halogen filament tube or an HID arc tube, is blown bulbs like the "R" and "ER" lamps; at other
Light Center Length (L.C.L.) a precision pressed-glass reflector lamp. PAR lamps times, it includes all reflectorized lamps like PAR
The distance between the center of the filament, rely on both the internal reflector and prisms in the lens and MR.
or arc tube and a reference plane—usually the for the control of the light beam. Today it is common
bottom of the lamp base. to refer to LED replacement products for PAR lamps Series Lamp Operation
as "LED PAR Lamps" even though there may be no Refers to ballasts that employ a single current path
Light Emitting Diode (LED) parabolic reflector in the package. passing through all lamps operated by the ballast. If
A solid that directly converts electrical impulses one lamp should fail, companion lamps operated by
into light. Parallel Lamp Operation/Parallel Wiring the same ballasts will also extinguish or dim.
Refers to ballasts that employ multiple output
Glossary of Terms

LM79 current paths from a single ballast to allow lamps Specification Series (SP) Colors
Test procedures specified by the Illuminating to operate independent of one another, allowing Energy-efficient, all-purpose tri-phosphor
Engineering Society for measurements on LED other lamps operated by the ballast to remain fluorescent lamp colors that provide good color
products (complete assembled systems) of lumens, lit should companion lamp(s) fail (see SERIES rendering. The CRI for SP colors is 70 or above
watts and color in actual operating environments. LAMP OPERATION). and varies by specific lamp type.

LM80 PCB (Polychlorinated Biphenyls) Specification Series Deluxe (SPX) Colors

Test procedures specified by the Illuminating Chemical pollutant formerly used in ballast Energy-efficient tri-phosphor fluorescent lamp
Engineering Society for measuring lumen depreciation capacitors that were part of ballasts. It is now colors that provide better color rendering than
of LED sources, arrays and modules—not luminaires. illegal to use PCBs and most such ballasts have Specification Series (SP) colors. The CRI for SPX
been replaced over time. colors is 80 or higher and varies by specific lamp
type.

154 – www.LED.com/Lamps
GLOSSARY OF TERMS
Spectral Power Distribution (SPD) Total Harmonic Distortion (THD)
A graph of the radiant power emitted by a A measure of the distortion of the input current
light source as a function of wavelength. SPDs on alternating current (AC) power systems caused
provide a visual profile or "fingerprint" of the color by higher order harmonics of the fundamental
characteristics of the source throughout the frequency (60Hz in North America). THD is
visible part of the spectrum. Also called "spectral expressed in percent and may refer to individual
curve" or "spectrum." electrical loads (such as a ballast) or a total
electrical circuit or system in a building. ANSI
TCLP Test C82.77 recommends THD not exceed 32% for
The Toxicity Characteristic Leaching Procedure (TCLP) individual commercial electronic ballasts,
test, specified in the Resource Conservation and although some electrical utilities may require
Recovery Act (RCRA) of 1990, is used to characterize lower THDs on some systems. Excessive THDs
fluorescent lamp waste as hazardous or nonhazardous on electrical systems can cause efficiency losses
waste. The TCLP test measures the ability of the as well as overheating and deterioration of
mercury and/or lead in a lamp to leach from a landfill system components.
into ground water.
Voltage
THD (see TOTAL HARMONIC DISTORTION). A measurement of the electromotive force in
an electrical circuit or device expressed in volts.
TM21 Voltage can be thought of as being analogous to
Technical Memorandum developed by the Illuminating the pressure in a waterline.
Engineering Society to provide method for projecting
lumen maintenance of an LED source, array or module Watt
as a function of temperature. This will allow LED A unit of electrical power. Lamps are rated in watts
Luminaire manufacturers to predict lumen depreciation to indicate the rate at which they consume energy.
in their fixtures, based on the operating temperature
of the LED in that package. See also, "L70, L85, etc."

Glossary of Terms

ENERGY STAR® is a registered U.S. mark

www.LED.com/Lamps – 155
ALBEO

DAINTREE WIRELESS CONTROLS

EVOLVE

FORUM

GE LAMPS

GTX

IMMERSION

LIGHTGRID

LIGHTSWEEP

LUMINATION

TETRA

Current - GLI Brands

25825 Science Park STE 400
Beachwood, OH 44122-7392

LED.com/Lamps
© 2024 Current Lighting Solutions, LLC. All rights reserved. GE and the GE monogram are trademarks of the
General Electric Company and are used under license. Information and specifications subject to change without
notice. All values are design or typical values when measured under laboratory conditions.

(Rev 02/21/2024)
GEL207-GE-Lamps-Catalog_R09