SCOPE OF WORK FOR PLANT AND TECHNOLOGICAL STRUCTURES FOR

LCP#4 & 9 (PRIMARY & SECONDARY GRINDING SYSTEM)

Basic Information: -
Name/Designation of the requisitioned: Saurabh Khare/Vaibhav Gondkar
Department/Location where work is to be done: Civil & Structural
Work Description: STRUCTURAL WORK
Area Awareness: Operational Area
Qty Requirement With UOM 375 MT
Service Code: As Per BOQ
Fund Center/WBS:-
Period of Service in Months:- 6 Month

A. Scope of Work: - (In Detail)

1. JSW Technical Consultant will provide all design drawings of Comprehensive nature indicating all kinds of forces,
based on Which, the Vendor shall develop fabrication drawings indicating connection details. The connection
details, if being deviated/changed by the vendor anywhere, will be incorporated after done approval of The
Consultant/JSW. However, the connection details provided by consultant such as base details, cap details etc shall
be followed strictly. Accordingly, drawing approval is required prior to execution of work.
2. Job Completion Period: 6 Months from date of LOI/PO.
3. Free Issue Material: Please refer POINT E.
4. Drawing issuance Schedule -3 Month from date of LOI/PO. (In case the design/scope drawing issue period is made
advance (preponed),the execution period has to be reduced proportionately)
5. Surface preparation and painting:
1) Bunkers (All steel work shall be shot blasted to SA 2.5).
Product Name JSW Paints Product Volume Solid No. of Coats DFT(mic) Service Life
Epoxy Zinc Rich Primer with 80% Zinc Content
ColourDur P211 Epoxy ZR Primer Z80 65% 1 75
on Dry Film
5 Years
Zinc Phosphate Cum MIO intermediate Coat ColourDur P211 Epoxy MIO Coating 80% 1 125
Acrylic Aliphatic PU Finish Paint ColourDur T200 PU finish Paint 60% 1 60

6. JSW-obligations: Construction Power at single location as per requirement/ Drinking water/ Area for Site office.
7. JSW Safety Rules and Regulations must be followed strictly at the Project Site. (Ref Safety Annexure)
8. Handrails, gratings, cage ladders, Stair case and fasteners are to be dispatched in dedicated vehicles for proper
accounting of the same against particular line item.
9. Rain water gutter, down take pipes along with all supporting structure and monorail shall be the supplied and
erected by vendor as per drawings provided by Consultant.
10. All erection members must be clean before erection.
11. PAINT-DFT and other Physical inspection shall be checked at site also after receipt of fabricated structures.
12. Quantity of Structural Work shall vary from (+/-) 20 % of provided BOQ.
13. All crane and erection equipment are in vendor scope.
14. All fabricated structure consignment must be dispatched after prior approval in writing from JSW Engineer in-
charges.
15. JSW will provide levelled and fenced area for development of labor colony. Accommodation with all facilities to be
arranged by Contractor.
 16. Vendor shall procure all required steel and Paints from JSW Group that is in the manufacturing range of JSW
Group. In case product is not available in the manufacturing range of JSW Group then vendor shall procure it from
market after written approval from JSW.
17. Any temporary platform or structure to be used during erection work shall be made according to instructions of
JSW Site Engineer.
18. All fabrication and erection joint of technological structure should have 100% DP test shall be in vendor scope.
19. The structural work will be carried out only after preparation of proper protocol in JSW format and in line with
JSW requirements including risk assessment and enclosure of proper supporting documents which shall be
informed by JSW Site incharge.
20. All the lifting tools & tackles & safety implements including farana, trailers, cherry pickers, chain blocks, slings etc
shall be approved by the Third party authorized approvers and valid documents of the same will be kept with JSW
site incharge.
21. 100% UT for technological structure in vendor scope as per the guidence of JSW Engineer and BOQ
22. supporting structure shall be the supplied and erected by vendor as per drawings provided by Consultant.
23. All the welding joint of all side, bottom and top shall be 100% leak proof.
24. JSW reserve all the rights to reject the work done by the Agency, if quality of work does not match with quality
parameter. Also, free issue material’s cost will be recovered from the account of contracting agency @ double
rate of market price.
25. For material for construction please refer Technical Specification given.

B. Tools & Tackles: -

Sr No Description of Tools Qty JSW/Vendor Scope
1 Spanner /Hammer As per site Vendor
requirement
2 Gas Cutting set As per site Vendor
requirement
3 Welding Machine As per site Vendor
requirement
4 Grinder As per site Vendor
requirement

C. Consumable List: - (Pl attached List)

Sr No Description of Tools Qty JSW/Vendor Scope
1 LPG/Oxygen Cylinder As per site Vendor
requirement
2 Welding Rod As per site Vendor
requirement
3 Grinding wheel As per site Vendor
requirement
 D. Equipment Details: - (Pl attach list)
Sr No Description of Tools Qty JSW/Vendor Scope
1 Farana 15 T As per site Vendor
requirement
2 Man lifter/ Crane As per site Vendor
requirement
3 Trailor for material shifting at As per site Vendor
requirement
site

E. FREE issue Applicable: -

Material
Sr No. PR No. code ( if Material Description Qty Unit
Any)
1 Supply of Supporting Structure 350 MT
2 Supply of Technological Structure 25 MT

F. Safety Guideline

1) Grinding wheel or Cutting wheel should have a make of BOSCH

2) Flashback arrestor (NRV) for the gas cutting set should have make of Messer / ESAB
3) Welding Machine should have a make of EWAC / ESAB / ADOR FORTECH

G. Infrastructure: -
Sr No Description Qty JSW/Vendor Scope
1 Space for office & Equipment As per JSW
parking. requirement
2 Accommodation & fooding for As per Vendor
Contract Employees in Vendor . requirement
 H. Mandatory Safety high risks standards:
WAH Scaffolding MG CS LOTO CSM CSE Road Safety PPE ES PSM SM C&L PTW MOC

A. Mandatory/ Job Specific PPE's:

Helmet Shoes Jackets Dust Mask Goggles Ear Plugs Gloves Apron Face shield Leg
guard

B. Vendor has to follow the below mentioned shift timing as per

instruction of JSW Site in charge: -

SR. NO. SHIFTS TIMINGS

1 General Shift 9.30 AM to 6.00 PM (1 hour lunch break)
 C. Vendor has to provide manpower according to the below
guidelines:

SKILL ASSESSMENT
Category
The skill level of
: Gate Supervision /
workmen shall be Area of Deployment
pass Experience Qualification Guidance
defined as:
entry required required requirement Remarks
- Literate: By In No case
Roads, Gardens, Office
Unskilled Workmen: One Must be able semiskilled/ the person
space where entry is not
who can perform only to read skilled should be
required in process
“Unskilled Work” meaning Signage’s workman exposed to
Unskilled areas, Stores outside
by only such work which hazards at
Cat 1 shop floor, Office helper
involves simple operations shop floor
not requiring to go to
requiring little or no skill including
process shops, Within
or experience on the job; Overhead
Canteens
equipment’s.
Cleaning in Process 1 Years SSC By
Unskilled shops, Electrical Rooms, semiskilled/
Cat 2 Control Rooms, Canteen skilled
Shop floor Services, 3 Years Below SSC workman
3 Years SSC By
Assistance in any tech semiskilled/
Unskilled
work ( helper) including skilled
Cat 3
material handling, 5 Years Below SSC workman
Semiskilled (<Trade All 1 Year -ITI or other By Skilled or Person
Workmen: One who can name> tech Highly Skilled below 8th
perform work falling Semi 3 Years certification workmen. pass shall
under the category of Skilled not be
“Semi-skilled Work”, ie -HSC but with deployed in
meaning by only such Welder - relevant skill this
work which involves some Semi 5 year acquired category.
degree of skill or Skilled through work
competence acquired experience.
through experience on the
job and which is capable of 10 Years -SSC but with
being performed under the relevant skill
supervision or guidance of acquired
a skilled employee and through work
includes supervisory work experience.
for unskilled work.
- 8th but with
relevant
 experience
acquired
through work
experience.
3 Year -ITI or other By Skilled or Person
tech Highly Skilled below 8th
5 Years certification workmen. shall not be
deployed in
Skilled Workmen: One
-HSC but with this
who can perform work
relevant skill category.
falling under the category
10 year acquired
of “Skilled Work”,
through work
meaning by such work
(<Trade experience.
which involves skill or
name>
competence acquired
Skilled -SSC but with
through experience on the All
ie 12 Years relevant skill
job or through training as
Welder - acquired
an apprentice in a
Skilled through work
technical or vocational
experience.
institute and the
performance of which calls
- 8th but with
for initiative and
relevant
judgement.
experience
acquired
through work
experience.
Highly Skilled 10 Years -ITI or other Shall work Person
Workmen: One who can tech independently below SSC
perform falling under the 15 Years certification and shall be or ITI or
category of "Highly Skilled responsible equivalent
Work” means work which -HSC but with for shall not be
calls for a degree of relevant skill supervision of deployed in
perfection and full 20 Years acquired his group this
competence in the through work made up of category.
(<Trade
performance of certain experience. skilled,
name>
tasks including clerical semiskilled
Highly
work acquired through -SSC but with and unskilled
Skilled
intensive technical or relevant skill workmen.
ie
professional training or acquired
Welder -
practical work experience through work
Highly
for certain reasonable experience.
Skilled
period and also requires of
an worker to assume full
responsibility for the
judgement or decision
involved in the execution
of the tasks.He should also
be able to train others in
his trade