Wheel Dozer TA1
TA1 0 0 54 0
n ° de Inspection 13446717 Nom du client SBF
Marque CATERPILLAR Date de fin 17/07/2023 08:40:50
Numéro de série 9EM01056 Inspecteur Ammar LADRAA
modèle D8R PDF généré sur 17/07/2023
famille Équipement WHEEL DOZER SMU 15205 Heures
emplacement sfax COORDONNÉES 0, 0, 0
Technician
General Info & Comments
General info/Comments
Prepare Machine
1.1 Check with customer for operator complaints NORMAL
1.2 Perform machine inspection preparation NORMAL
1.3 Download Product Status Report (ET Download) NORMAL
1.4 Is the machine software including Product Link & VIMS Config files current YES
with what is published in SIS?
1.5 Check Product Link YES
1.6 Observe engine exhaust colors NORMAL
1.7 Listen for unusual noises NORMAL
1.8 Lockout / Tagout Machine YES
Lower-Level Inspection
2.1 Tires and Rims NORMAL
Form Order Report Serial Number : 9EM01056 Page 1 of 5
2.2 Rear Final Drives, Brakes and Wheel Spindles NORMAL
2.3 Front & Rear Differentials NORMAL
2.4 Main, front, center, rear & hitch drive shafts NORMAL
2.5 Center support bearing NORMAL
2.6 Torque converter, transmission and transfer gear NORMAL
2.7 Hydraulic Pump Compartment NORMAL
2.8 Upper and lower hitch pins/bores NORMAL
2.9 Main machine frame
Middle-Level Inspection
3.1 Steps & Handrails
3.2 Work Lights
3.3 Cab Mounts NORMAL
3.4 Steering control valve, steering neutralizer valve, brake valve, and HMU NORMAL
3.5 Implement control valve NORMAL
3.6 Radiator, Aftercooler, Oil Cooler & Condenser NORMAL
3.7 Hood and Platform NORMAL
3.8 Battery & Cables NORMAL
3.9 Fenders NORMAL
Form Order Report Serial Number : 9EM01056 Page 2 of 5
3.10 Lower Radiator & Oil Cooler Hoses NORMAL
3.11 Engine Oil Pan NORMAL
Upper-Level Inspection
4.1 Cab Exterior NORMAL
4.2 Cab Interior NORMAL
4.3 Precleaner and Air Cleaner NORMAL
4.4 Upper and Lower Radiator Lines, Air Inlet Lines and Aftercooler Lines NORMAL
4.5 Radiator Cap NORMAL
4.6 JW Water Pump NORMAL
4.7 Fuel Lines, Fuel Pump and Fuel Filter Base NORMAL
4.8 Exhaust Manifold NORMAL
4.9 Turbocharger NORMAL
4.10 Cylinder Head and Valve Cover NORMAL
4.11 Pulleys, Belts, Compressor Clutch and Alternator NORMAL
4.12 Cooling Fan, Fan Guard and Shroud NORMAL
4.13 Engine wiring harness NORMAL
4.14 Mounts, Isolators, Supports & Rails NORMAL
Form Order Report Serial Number : 9EM01056 Page 3 of 5
Implement/Attachment Inspection
5.1 Lift cylinder NORMAL
5.2 Inspect ALL Blade Push Arm Trunnions, Knuckles & End Caps NORMAL
5.3 Blade tilt cylinder NORMAL
5.4 Area where tilt cylinder attaches to the blade and push arm NORMAL
5.5 Gough - Check the condition of the blade cutting edge NORMAL
5.6 Blade wear plates NORMAL
Site Conditions
6.1 Ambient Temperature in Engine Room NORMAL
6.1.1 (90° to 115°F or 0° to -20°F) - ACTION: Above 46°C or Below -29°C
(Above 115° or Below -20°F)
6.2 Altitude NORMAL
6.3 Humidity NORMAL
6.4 Air Quality NORMAL
6.5 Underfoot Condition NORMAL
6.6 Machine Utilization NORMAL
6.7 Equipment Role SELECT TO ADD
TEXT
6.8 Working Material NORMAL
6.9 Maintenance Practices NORMAL
Form Order Report Serial Number : 9EM01056 Page 4 of 5
Form Order Report Serial Number : 9EM01056 Page 5 of 5
