Type : General Work Permit
Number : 0-VIZ#705366
State : Live
Shift Validity : 06 Aug 08:55 - 06 Aug 18:00
Title: TS WH - Electrical panel/cable tray and fire line installation works
Work Description: panel installation works
installation of panels in low bay/highbay mezzanine floor in panel room
installation of DDC and LCS panels high bay and low bay areas
installation of hvac distribution board at high bay mezzanine floor
cable tray cable laying works
Drilling activity for Cable tray
Cabling & Cable tray preparation at ground floor area.
spray painting for the cable tray and earth strips at warehouse
conduiting cutting and threading
fire line works
Low bay area Fire fighting pipe assembling works,
segregation and erection of fire hydrant pipe lines in low bay area
pipe grooving and hole saw cutting activites
Permit Details
Site: Vizag
Company: Sterling & Wilson
Work Supervisor:
Naveen kumar/dinesh kumar
EHS:
sandeep
santosh
ananta kumar
Boom Lift Operator: Nitesh Kumar,/Chandan kumar
flagman: sriram
cable tray team/mechanical
Fitter/ Grinder:
Naveen kumar
sunil paswan
Helper:
Jitendra kumar,
Anannd kumar,
Md,Suraj kumar,
Kisan mahto,
Pradeep,
Jithesh, Rakesh,
sandeep kumar,
Sunil paswan
Ramnayan sigh
Chandrabhan
Sree ram das
cable laying team
dalvir
jogendhar
manoj kumar
mukesh
Nandalal sharma
rajesh kumar
sukdev
sunil
rigger:
chandra bhanu
YMSCE-Bharat/Ramesh/Hari/Mahesh
Planned Start Date: 06 Aug 2025
Planned End Date: 06 Aug 2025
Location(s): TS WARE HOUSE EXPANSION AREA
Equipment: NA
0-VIZ#705366 08/06/2025 09:04 Page 1 of 3
Type : General Work Permit
Number : 0-VIZ#705366
State : Live
Shift Validity : 06 Aug 08:55 - 06 Aug 18:00
Tools/Equipment to be used: Signal Flags
Web slings 3Ton 6Mtr Due date:09-03-2026
Web slings 5Ton 5Mtr Due date:09-03-2026
Web slings 5Ton 5Mtr Due date:09-03-2026
Tag line ropes -2 No
Hand Tools
Spine Board Location: Expansion project area
chain block: 3 TON
validity: 28-01-2026
1. Drilling machine due date:25-08-2025
2. Drilling machine due date:26-08-2025
grooving machine
due date: 01-09-2025
hole saw cutting machine
due date; 1-09-2025
Number of Persons: 10
Work Order: CCF-8514411
Lead Discipline: Electrical
Integrity Test Required: No
Method Statement Required: Yes
Required Documents: Other
LOTO Requirement: No
Permit Requester Contact sagar bandaru
Details: 9396669393
Permit Authoriser Contact 9063688628
Details:
Person Responsible for Worksite Permit Issuer
Inspection:
Integrity Test Table
Equipment Tag (PR) Integrity Test Equipment has been If unable to complete Integrity Test has Comments
required? (PR) secured and double Integrity Test, been performed and
checked after task Equipment must be passed (PAc or PI)
completed (PAc) identified in the field
"For Test" (PAc)
Attached Certificates
Signature History
Signature Signee Date Company: Remarks
Accept by Permit Accepter Sagar Bandaru 06 Aug 2025 09:01 YMSCE
Sudheer Devireddy Sudheer
Issue by Permit Issuer 06 Aug 2025 08:55 Pfizer
Devireddy
Sudheer Devireddy Sudheer
Authorise by Permit Authoriser 06 Aug 2025 08:55 Pfizer
Devireddy
Request by Permit Requester Sagar Bandaru 06 Aug 2025 08:29 YMSCE
0-VIZ#705366 08/06/2025 09:04 Page 2 of 3
Type : General Work Permit
Number : 0-VIZ#705366
State : Live
Shift Validity : 06 Aug 08:55 - 06 Aug 18:00
Risk Assessments
Risk Assessment Level RA
Hazard (Group) Control Measure Prereq.
General Access (ACCESS) Construction Helmet, Safety Footwear, Hi- Visibility vest, Safety No
Glasses, Long sleves/armlets, and Gloves cut level 3 to be worn
No access to restricted rooms/areas unless specified in the permit No
description.
Using hand tools (EQUIPMENT) All non Ex-rated and non-certified electrical tools to be inspected by No
competent Electrical person.
Kevlar gloves to be worn when using knives No
Non spark tools must be used in designated areas. No
Only insulated tools to be used in designated areas. No
Well designed and maintained power tools, with low vibration No
characteristics shall be used.
Lift Planning (Cranes) (MOVING LOADS) A Spotter* controls the load during transfer and ensures persons are No
not in direct line of the suspended load. Spotters must be identified
with orange printed vest / jacket.
A competent Rigger is required to rig load safely. No
All crane operators are trained and qualified to operate the lifting No
equipment.
All lifting appliances (shackles/slings/chains/lifting devices) certified No
for use and certification reviewed before commencing lifting activity.
All lifting machinery certified for use and certification reviewed before No
commencing lifting activity.
In addition to visual controls, 2-way radio communication is required No
for all lifts
Lift plan in place for the proposed lift, approved and reviewed by all No
involved.
Lifting over live / occupied areas should only be done as a last resort No
and should be subjected to a detailed risk assessment.
Transporting - Securing /Unloading All loads must be secured to the vehicle when transporting. No
(MOVING LOADS)
All suspended loads need to be attached by a trained rigger. A tagline No
must be used to control / guide movement of the load
When unloading from a trailer the rigger must be protected from No
potential falls from height.
Manual Transport. (MOVING LOADS) Any load over 2m in length must be carried by minimum of 2 people. No
Operatives must be trained in good manual handling practice. No
Where possible avoid manual lifting of loads. No
0-VIZ#705366 08/06/2025 09:04 Page 3 of 3
