Scribd
Upload
15 views3 pages

Ppe - Prposed Ppe

The document outlines the proposed personal protective equipment (PPE) for various tasks and activities, including machine operation and vehicle handling, along with corresponding standards. Each task, such as End of Line, Dyno, Test Track, and Pre Delivery Inspection, specifies required PPE like helmets, gloves, safety shoes, and high-visibility vests. Additionally, it references relevant safety standards to ensure compliance and protection for workers.

Uploaded by

Mathan Flufy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
15 views3 pages

Ppe - Prposed Ppe

The document outlines the proposed personal protective equipment (PPE) for various tasks and activities, including machine operation and vehicle handling, along with corresponding standards. Each task, such as End of Line, Dyno, Test Track, and Pre Delivery Inspection, specifies required PPE like helmets, gloves, safety shoes, and high-visibility vests. Additionally, it references relevant safety standards to ensure compliance and protection for workers.

Uploaded by

Mathan Flufy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Activity/Task/

Proposed PPE Standards


Machine
T1 - End of Line
IS 2925:1984
T1 - End of Line ISI marked rider safety helmets
IS 4151:2015
Rider safe Elbow guards

Rider safe Knee guards


ISI marked rider safety helmets
Safety shoes with anti skid soles
Rider safe Elbow guards

Rider safe Knee guards

Gloves with knuckle pads.


Cut and abrasion resistant gloves with knuckle pads

High visibility vest


Proper ramp lighting

T2- Dyno

IS 2925:1984
T2 - Dyno Industrial helmet IS 4151 (BIS)
ANSI Z89.1
EN 388
Cut-resistant level 3 gloves
IS 15351
IS 15298-2 (Part 2)
Safety Shoes with Anti-Static & Steel Toe
EN ISO 20345

High-Visibility Reflective Vest IS 15809:2017


IS 5983:2018
Clear Safety Goggles
EN 166
IS 6229
Hearing Protection (if noise >85 dB)
EN 352

Knee Pads

T3 - Test Track

Riding the vehicle on


ISI-marked Full-face Helmet IS 4151:2015
track

Riding the vehicle Clear/Scratch-resistant Safety Goggles IS 5983:2018

Riding the vehicle Riding Gloves (abrasion-resistant) EN 13594:2015

Manual pushing/moving
Riding Gloves (cut-resistant) IS 5557 Part 1
vehicle
Riding or manual
Safety Shoes (Steel/Composite Toe) IS 15298 (Part 2):2016
handling
Manual lifting, pushing, General industrial use
Knee Pads / Padded Riding Pants
riding (ergonomic protection)
CE-rated riding jacket
Riding in sun or dust H Full-sleeve Jacket with abrasion-resistant material
(EN 17092 as
Charging/testing station Arc-rated coveralls, insulated gloves (only if near open battery international
IS 4770:1991ref)
area (if exposed to packs) IS 11353:1985
battery)
Pre Delivery Inspection

IS 5557:2004
Pre Delivery Inspection Industrial Safety Gloves
EN 388
IS 15298 (Part 2): 2011
Safety Shoes with Toe Protection (Steel/Composite)
EN ISO 20345

Cut-Resistant Gloves EN 388 Level 3+


Earplugs or earmuffs IS 9167
(optional, if >85 dB) EN 352
IS 5983
Safety goggles
ANSI Z87.1
IS 15809
Hi-visibility safety jacket
EN ISO 20471
Anti-fatigue mat OSHA Ergonomics
(Engineering Control) Guidelines

FG

Vehicle handling at FG
Industrial Safety Helmet IS 2925:1984
storage & Dispatch area

Industrial Safety Helmet IS 2925:1984

IS 15809:2017
High Visibility Reflective Jacket
ISO 20471

Industrial gloves – cut-resistant/nitrile grip IS 6994 (Part I):1973

Steel Toe Safety Shoes, slip-resistant sole IS 15298 (Part 2):2016

Earplugs or Earmuffs (only if applicable – greater than 85dB) IS 9167:1979

Headlamp or torch if lighting is poor

You might also like