Scribd
Upload
16 views1 page

Heat and Surface Treatment: Dimensional Stability Hardening

The document discusses heat and surface treatment methods for rolling bearings, emphasizing the importance of hardening techniques such as through-hardening, induction-hardening, and case-hardening to enhance fatigue resistance and stability. It also highlights surface treatments and coatings, including INSOCOAT and NoWear, which improve performance under specific conditions. Additionally, it provides a classification system for internal clearance and dimensional stability of bearings.

Uploaded by

qiongyao cui
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
16 views1 page

Heat and Surface Treatment: Dimensional Stability Hardening

The document discusses heat and surface treatment methods for rolling bearings, emphasizing the importance of hardening techniques such as through-hardening, induction-hardening, and case-hardening to enhance fatigue resistance and stability. It also highlights surface treatments and coatings, including INSOCOAT and NoWear, which improve performance under specific conditions. Additionally, it provides a classification system for internal clearance and dimensional stability of bearings.

Uploaded by

qiongyao cui
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Heat and surface treatment

Heat and surface Hardening Dimensional stability


treatment There are three typical hardening methods
that may be applied to bearing components:
Heat treatment is used to limit dimensional
changes caused by metallurgical effects at
extreme temperatures. There is a standard-
Rolling bearing rings and rolling elements • Through-hardening ized classification system for dimensional
must: This is the standard method for most stability (table 2). The various SKF bearing
bearings and provides good fatigue and types are stabilized to different classes as
• be hard enough to cope with fatigue and wear-resistance, as hardening is applied standard.
plastic deformations over the full cross section.
• be tough enough to cope with applied

A.1 Bearing basics


loads • Induction-hardening
• be sufficiently stable to experience only Surface induction-hardening is used to Surface treatment
limited changes of dimensions over time selectively harden a component’s raceway
to limit rolling contact fatigue, leaving the and coatings
The required properties are achieved by heat remainder of the component unaffected to
and surface treatments. maintain structural strength. Coating is a well-established method for
providing bearings with additional functional
• Case-hardening benefits to accommodate specific application
Case-hardening provides hardness to the conditions. Widely used coatings are zinc
surface. It is used, for example, where chromate and black oxide.
bearing rings are subjected to high shock Two other methods developed by SKF
loads causing structural deformations. have proven successful in many applications:

• INSOCOAT bearings are standard bearings


that have the external surfaces of their
inner or outer ring coated with an alumin-
ium oxide layer. This coating increases
resistance to electric current through the
bearing.
• NoWear enhances wear-resistance of the
raceway or rolling element surfaces. It can
help the bearing withstand long periods of
operation under poor lubrication conditions
and to reduce the risk for low load damage.

Table 1

Internal clearance classes

ISO clearance SKF designation Internal clearance


class suffix
Table 2
– C1 Smaller than C2
Dimensional stability
Group 2 C2 Smaller than Normal
Stabilization Stabilized up to
Group N – Normal class

Group 3 C3 Greater than Normal – °C °F

Group 4 C4 Greater than C3


SN 120 250
Group 5 C5 Greater than C4 S0 150 300
S1 200 390

S2 250 480
S3 300 570
S4 350 660

27

You might also like