ThyssenKrupp Industries India
Spare parts Manual
Cone crusher
Kubria G 90
ThyssenKrupp Industries India Pvt. Ltd.
Pimpri, Pune, India.
Telephone: +91 20 2742 5461
Telefax: +91 20 2742 5350
Internet: www.thyssenkruppindia.com
This operating manual in all its parts is protected by copyright. All rights reserved including those of translation
into other languages. This manual as a whole or part of it is not allowed to be processed, reproduced or
Page 1 of 13
ThyssenKrupp Industries India
distributed in any form, electronic systems included, without the written permission of THYSSENKRUPP
INDUSTRIES INDIA.
Page 2 of 13
ThyssenKrupp Industries India
General
Ordering information
When ordering parts, always state the machine type and machine
no.
According to the identification plate on the jaw crusher. State
quantity
and denomination for each ordered part. (Quantities listed in this
catalogue are number of parts that are usually exchanged at the
same time in a
certain position or function.)
Identification plate
The figure below shows an example of the crusher’s identification
plate. The
identification plate contains data needed when contacting
ThyssenKrupp
concerning wear parts.
Please enter the serial number of the associated machine in the
intended field Below:
This document is valid for:
Machine type. / Machine no. Manufacture.
Page 3 of 13
ThyssenKrupp Industries India
Page 4 of 13
ThyssenKrupp Industries India
Cone crusher assembly
ITEM NO. QTY DESCRIPTION DRAWING NO./MAT.
NO.
Page 5 of 13
ThyssenKrupp Industries India
1 1 Bottom shell complete R.K02.100.09.00
2 1 TOP SHELL (SPIDER)ASSEMBLY R.K02.200.09.00
3 1 MAIN SHAFT ASSEMBLY R.K02.300.09.00
4 1 ECCENTRIC BEARING ASSLY R.K02.400.09.00
5 1 HYDRAULIC CYLINDER R.K01.500.09.00
COMPLETE
6 1 THRUST BEARING ASSEMBLY R.K01.600.09.00
7 1 INTERMEDIATE GEAR ASSLY R.K01.700.09.00
Page 6 of 13
ThyssenKrupp Industries India
1.Bottom shell assembly
ITEM QTY DESCRIPTION DRAWING NO./MAT.
NO. NO.
1 1 Bottom shell R.K01.100.09.00
4 1 Outer bushing 119023919
5 1 Oil Sealing ring (dust sealing)) 119023930
11 1 Sealing 6mm 119024112
13 1 O ring 119024113
25 1 Liners for bottom shell R.K02.100.09.00
Page 7 of 13
ThyssenKrupp Industries India
2.Top shell assembly
ITEM QTY DESCRIPTION DRAWING NO./MAT. NO.
NO.
1 1 Spider R.K02.200.09.00
2 1 Crushing ring R.K02.200.09.02
4 1 Rolling contact bush R.K01.200.09.04
5 2 Spider cap R.K02.200.09.05
6 2 Sealing ring spider 119024161
8 8 Wear Cap (spider arms) R.K02.200.09.07
9 2 Liner plates R.K02.200.09.08
Page 8 of 13
ThyssenKrupp Industries India
10 2 Liner plates R.K02.200.09.09
15 6 Bolts 119024373
17 6 Disc spring 112200193
18 6 Hexagon nuts 119000717
23 1 Countersunk head screws 119024374
43 1 O ring 119024382
50 2 Concave R.K02.200.09.13
51 4 Concave key R.K02.200.09.14
52 4 spacer R.K02.200.09.16
53 6 spacer R.K02.200.09.17
54 1 spacer R.K02.200.09.18
Page 9 of 13
ThyssenKrupp Industries India
3.Main shaft assembly
ITEM NO. QTY DESCRIPTION DRAWING NO. / MAT.
NO.
3 1 Mantle R.K02.300.09.03
4 1 Burning (spacer) ring mantle R.K02.300.09.04
5 1 Ring nut 119024405
6 1 Wear bushing R.K01.300.09.06
7 1 Dust seal ring 119024120
15 1 Backing compound 119024874
Page 10 of 13
ThyssenKrupp Industries India
Page 11 of 13
ThyssenKrupp Industries India
4.Eccentric bearing assembly
ITEM NO. QTY DESCRIPTION DRAWING NO. / MAT.
NO.
1 1 Eccentric bushing R.K01.400.09.01
2 1 Unbalance ring R.K01.400.09.02
4 1 Inner bushing 119024922
Page 12 of 13
ThyssenKrupp Industries India
7.Intermediate gear assembly
ITEM NO. QTY DESCRIPTION DRAWING NO./MAT.
NO.
1 1 Pinion 119023923
6 1 V belt pulley R.K01.700.09.06
7 1 CYL ROLLER BEARING 119023911
8 1 TAPERED ROLLER BEARING 119023912
9 2 SHAFT SEAL RING 119024175
24 1 O ring 119024171
25 2 O ring 119024172
42 2 O ring 119024173
Page 13 of 13
