TMCX

TMCX
TMCX GLOBALLY APPROVED, HAZARDOUS (CLASSIFIED)
LOCATION BARRIER CABLE GLAND

FOR MC, MC-HL, INTERLOCKED & TECK ARMORED CABLES

 imple, sequential installation process
S
Compound barrier type flameproof seal
Integral protected deluge seal
Low Impedance Copper Plated Stainless Steel 360° Grounding Spring
Disconnectable, union design feature
- 60˚C to +85˚C (-76˚F to +185˚F)
Globally marked, UL, cCSAus, IECEx, ATEX and UKEX
+85˚C

-60˚C

TECHNICAL CLASSIFICATION GLOBAL PRODUCT CERTIFICATION

DESIGN SPECIFICATION BS 6121:Part 1:1989, IEC 62444, EN 62444 ATEX CERTIFICATE CML18ATEX1337X
IECEx CERTIFICATE IECEx CML 18.0184X
MECHANICAL CLASSIFICATION* Impact = Level 8, Cable Anchorage = Type D UKEX CERTIFICATE CML 21UKEX1261X
ENCLOSURE PROTECTION IK10 to IEC 62262 (20 joules) Brass and Stainless Steel only ^ II 2G 1D, Ex db IIC Gb, Ex db IIC Gb, Ex eb IIC Gb,
CODE OF PROTECTION CODE OF PROTECTION
Ex eb IIC Gb, Ex ta IIIC Da Ex ta IIIC Da
INGRESS PROTECTION RATING** IP66
COMPLIANCE STANDARDS EN 60079-0,1,7,31 COMPLIANCE STANDARDS IEC 60079-0,1,7,31
NEMA RATING** Type 4X
cCSAus CERTIFICATE 1129339
CABLE GLAND MATERIAL Copper Free (<0.4%) Aluminum, Stainless Steel, Electroless Nickel Plated Brass Class I, Div 1 and 2, Groups A,B,C, and D; Class II, Div 1 and 2, Groups E,F, and G;
CSAus CODE OF PROTECTION
Class III, Div 1 and 2; Encl. Types 3, 4, and 4X; Class I, Zone 1, AEx d IIC; AEx e II
SEAL MATERIAL CMP SOLO LSF Halogen Free Thermoset Elastomer / Epoxy Barrier Compound
Class I, Div 1 and 2, Groups A,B,C, and D; Class II, Div 1 and 2, Groups E,F, and G;
Corrugated and Interlocked Metal Clad Armor (MC) or TECK90, Continuously Welded cCSA CODE OF PROTECTION
CABLE TYPE Class III, Div 1 and 2; Encl. Types 3,4, and 4X; Ex d IIC; Ex e II
Metal Clad Armor (MC-HL), ACIC-HL, ACWU90-HL, RC90-HL, RA90-HL
CAN/CSA-C22.2 No 0-10,18.3-04,25,174,94,
ARMOR CLAMPING Low Impedance Copper Plated Stainless Steel 360° Grounding Spring COMPLIANCE STANDARDS CAN/CSA-C22.2 No.60079-0,1:, ANSI/UL 514B, ANSI/UL 50, ANSI/UL 60079-0,1,7,
JACKET SEALING TECHNIQUE CMP Displacement Seal CAN/CSA-E60079-7:07
UL CERTIFICATE E161256, E256366
SEALING AREA(S) Inner Compound Barrier and Cable Outer Jacket
Class I, Div 1 and 2, Groups A, B, C, and D; Class II, Div 1 and 2, Groups E, F, and G;
* Mechanical and Electrical Classifications applied as per IEC 62444 and EN 62444. CODE OF PROTECTION
Class III, Div 1 and 2; Class I, Zone 1, AEx d IIC
** When CMP installation accessories are used. Refer to www.cmp-products.com for further

AMERICAS HAZARDOUS LOCATION CABLE GLANDS

information. COMPLIANCE STANDARDS UL 514B, UL 2225, IEC 60529
E
F 24-03-106290/E24-03- CЦ 19.0371X
ECAS CERTIFICATE UkrSEPRO CERTIFICATE
110155/NB007
RETIE APPROVAL NUMBER EL-CS-230200 CCOE / PESO (INDIA) CERTIFICATE P444949
CCC CERTIFICATE 2020322313003429
MARINE APPROVALS LRS: LR22320739TA, DNV: TAE000000Y, ABS: 20-LD1948801-PDA, BV: 43180
D C
B A G

REMOVABLE ARMOR STOP

MINIMUM
ORDER REFERENCE (NPT) ENTRY THREAD ‘C’ CABLE ARMOR DIAMETER ‘A’ CABLE JACKET DIAMETER ‘B’ MAX
THREAD LENGTH ‘E’
NOMINAL
ARMOR WEIGHT
ARMOR STOP IN ASSEMBLY SHROUD
STOP OUT ACROSS (oz)
NICKEL PLATED LENGTH ‘F’ ACROSS
ALUMINUM STAINLESS STEEL NPT METRIC NPT METRIC MIN MAX CORNERS
BRASS FLATS ‘D’
‘D’
MIN MAX MIN MAX
TMCX050SA TMCX050SNB TMCX050SSS ½” M20 0.78 0.59 No Stop No Stop 0.34 0.50 0.35 0.55 1.83 1.20 1.32 PVC06 7.90
TMCX050A TMCX050NB TMCX050SS ½” M20 0.78 0.59 No Stop No Stop 0.51 0.67 0.55 0.79 2.06 1.42 1.56 PVC09 9.91
TMCX075A TMCX075NB TMCX075SS ¾” M25 0.80 0.59 0.59 0.76 0.76 0.92 0.67 1.04 2.09 1.61 1.78 PVC10 11.61
TMCX100A TMCX100NB TMCX100SS 1” M32 0.98 0.59 0.78 0.97 0.97 1.15 0.91 1.27 2.24 1.97 2.17 PVC13 17.53
TMCX125A TMCX125NB TMCX125SS 1 ¼” M40 1.01 0.59 1.08 1.23 1.23 1.39 1.16 1.50 2.22 2.17 2.38 PVC15 20.92
TMCX150A TMCX150NB TMCX150SS 1 ½” M50 1.03 0.59 1.32 1.46 1.46 1.62 1.40 1.74 2.31 2.36 2.60 PVC18 24.45
TMCX200SA TMCX200SNB TMCX200SSS 2” M50 1.06 0.59 1.51 1.68 1.68 1.85 1.58 1.97 2.52 2.76 3.03 PVC21 42.33
TMCX200A TMCX200NB TMCX200SS 2” M63 1.06 0.59 1.77 1.93 1.93 2.09 1.86 2.21 2.49 2.95 3.25 PVC23 38.80
TMCX250SA TMCX250SNB TMCX250SSS 2 ½” M75 1.57 0.59 2.05 2.16 2.16 2.32 2.08 2.44 2.73 3.15 3.47 PVC25 59.97
TMCX250A TMCX250NB TMCX250SS 2 ½” M75 1.57 0.59 2.25 2.41 2.41 2.55 2.33 2.68 2.84 3.35 3.68 PVC27 56.48
TMCX300A TMCX300NB TMCX300SS 3” M90 1.63 0.95 2.54 2.78 2.78 2.97 2.62 3.13 3.87 4.33 4.76 LSF32 123.46
TMCX350A TMCX350NB TMCX350SS 3 ½” M100 1.69 0.95 2.91 3.29 3.29 3.49 2.99 3.83 4.52 5.25 5.78 LSF34 236.34
Order code example: TMCX250SS “TMC” (Gland Type) - “250” (2 ½” NPT Thread) - “SS” (Material Stainless Steel)
Dimensions are displayed in inches unless otherwise stated
For 4” TMCX cable glands please contact CMP

Dimensions listed are for metric cable glands only. Dimensions for alternative threads may vary, please see supplementary technical data sheet.

www.cmp-products.com TDS566 REV22 12/24