KOHASA ENGINEERING COMPANY LIMITED

COMPANY: MONIPULO NIGERIA LIMITED

PROPOSALTITLE: AGBANI FPF HULL CORROSION CONTROL

DOCUMENT TITLE

WELDERS CERTIFICATE

0 4th June 2019 Nkasi O. Koumako E. Proposal

Rev No Date Prepared by Approved by Purpose of Issue

CLIENT: MONI PULO NIG. LTD KOHASA ENGINEERING COMPANY LIMITED
TITLE: AGBANI FPF HULL COROSION CONTROL

TABLE OF CONTENT

1.0 UNDER WATER WELDERS (LIOYDS )....................................................................................3

2.0 ABS AND BV CERTIFIED WELDERS........................................................................................4

JULY 2019. Page 2 of 4

CLIENT: MONI PULO NIG. LTD KOHASA ENGINEERING COMPANY LIMITED
TITLE: AGBANI FPF HULL COROSION CONTROL

1.0 UNDER WATER WELDERS (Lloyds)

JULY 2019. Page 3 of 4

ADS-HR-FM-02

TERBLANCHE Johannes Jochemus

IMCA CLASS II / AIR TECH / UNDERWATER WELDER

PERSONAL DETAILS
NAME (AS ON PASSPORT) Johannes Jochemus Terblanche
DISCIPLINES IMCA Class II 50m Air Diver
Underwater welder
Systems Technician
NATIONALITY South African
DATE OF BIRTH 1994/09/23
PASSPORT A01535219 Exp: 01/02/2021
SEAMAN’S DISCARGE BOOK SRB-9003193-B
CONTACT NUMBERS +234 805 520 9052
EMAIL ADDRESS p.holmes@ads-ng.com ; c.seaton@ads-ng.com
NEAREST AIRPORT (60mins to residence) Cape Town International
HSE DIVERS MEDICAL Exp: 18/05/2018

PROFESSIONAL QUALIFICATIONS
IMCA CLASS II Air diver Cert No. CS06/5145/270
Class III Dive supervisor Cert No. CS06/328/270
Compressor Operator Cert No. RSA/F01/DCO/14/000002
Lloyds Register underwater welding certificate Cert No. CTN 1610803/03
Skipper ≤9M Cert No. SVC-0023548-S
Calibration measurement WIKA Cert No. CTN-IPG-01
Air dive technician Cert No. SSDT170602-02
Exp: 2020-05-21
Kirby Hat Tech Cert No. T-13251

SAFETY TRAINING
First Aid Level 3 Exp: 2019-07-07

ACADEMIC QUALIFICATIONS

National Diploma Grade 12

SKILLS & EXPERIENCE SUMMARY

I have been involved in the commercial diving industry since September 2013. I am an experienced dive systems
technician and diver. I have been involved in the commercial diver training industry as well as underwater welder
training on to AWS D3.6m-10 standard. I am a very proficient welder on land and underwater. I can confidently work
on any Kirby Morgan helmet, any dive system and operate a decompression chamber. I can confidently replace the
RAMS and brakes on any LARS system and complete load testing. I am capable of servicing Tescom regulators and
any other air diving related fittings. I am a highly motivated individual who is capable of working under pressure and
without supervision. I am a good worker in a team and can confidently contribute positively to any working
environment.

TERBLANCHE Johannes Jochemus – IMCA Class II / Air Tech / Underwater Welder

Page 1 of 4
ADS-HR-FM-02

TERBLANCHE Johannes Jochemus

IMCA CLASS II / AIR TECH / UNDERWATER WELDER

OFFSHORE EMPLOYMENT HISTORY

Company / Client / Dates / Project Type
Position
Vessel Location Duration Construction/Inspection
Exxon Mobil/ 31/01/2018-
Africa Diving Services Port Harcort, 06/02/2018 Dive Technician Demobilisation
EKBE field.
Job Description: Demobilise system 3 to ADS yard. Remove Rams and close LARS for transport. Colour code pad
eyes and slings for lifting. Cut sea fastenings.
31/12/2017-
Africa Diving Services Lagos Nigeria Dive Technician Maintenance
30/01/2018
Job Description: Function test and service Yanmar outboards. Crane operations. Demobilize system 5 Unique
hydra LARS. Modify Mikano 60KVA generator fuel line and exhaust. Inventory on system 2.
Africa Diving Services / Boa Exxon Mobil/ 27/12/2017-
Dive Technician Mobilisation
Deep C Nigeria 30/12/2017
Job Description: Mobilise system 3, DDC, MAV and rhino 750 c/w SRP. Connect power supplies and function test.
Install step down transformer from 440v to 220v. Connect air supplies to DDC and function test.
11/12/2017-
Africa Diving Services Lagos, Nigeria Dive Technician Maintenance
27/12/2017
Job Description: Function test SRP system. Mobilise QIT SRP system. Fill air quads and diving cylinders. Function
test MPI black light. Redo umbilical for MPI black light. Fabricate and install pad eyes on 10ft container.
Africa Diving Services/ NSC Exxon Mobil/ 04/10/2017-
Dive Technician Maintenance
Glory Nigeria 17/10/2017
Job description: Gauge calibration on DDC, full function testing of DDC. Air purity testing. Viper pressure greasing.
Loadtesting LARS. Pressure testing umbilicals. Resplicing of comms and hat camera and light. Installing breakers in
LARS power supply junction box. Function testing HPU and hydraulic hoses. A2.2 servicing of Kirby Morgans.
04/09/2017- Yard dive Dive Technician
Africa Diving Services Lagos, Nigeria
04/10/2017 technician
Job Description: Service LARS hydraulic control unit. Open and service hydraulic whinch, replace o’rings. Crane
lifting operations. Function testing of UPS and battery chargers. Servicing of Lister diesel HPU and setting of
hydraulic pressure. Replace fuel pump on Mikano 60kva generator.
04/06/2017- Yard dive Dive Technician
Africa Diving Services Lagos Nigeria
02/08/2017 technician
Job Description: Assist with mobilisation of DSV Venice, weld sea fastenings. Do load testing on ROV LARS.
Repair ROV LARS leaking hydraulic hard piping. D040 on SRP unit 3. Complete inventory of warehouse. Leak test
system 2 pipe work and kellies. Function test entire system 2, outland camera and light systems. Complete overhaul
on SRP decompression chamber, piping, electrical, penetrators. Servicing of Kirby Morgans and Tescom regulators.
Replacing RAMS and brakes on Unique Hydra LARS. Welding of shelves in container. Demobilize QIT job SRP unit.
23/04/2017- Yard dive
Africa Diving Services Lagos, Nigeria Dive Technician
17/05/2017 technician
Job Description: Function test SRP unit 2. Servicing of TESCOM regulators. Servicing Bauer and L+W HP
compressors. Spray painting of containers. Fabrication of SRP container with distribution board and aircon. Installing
Kellies and hard piping in system 2 DDC. Function test and set PRV on Bauer Junior hp compressor. Air purity
testing on Bauer Junior. Fix leaking HPU. Fabricate steel shelves in warehouse.
13/01/2017- Yard dive
Africa Diving Services Lagos, Nigeria Dive Technician
24/03/2017 technician
Job Description: Fabrication of rigging store hooks and slings shelves. Outland portable unit camera and light
function testing. Recording of pillar valve threads and go and no go testing. Function testing HP jet unit. Viper
pressure greasing of LARS winch cables. Cleaning and inspecting of Hydra tight jacks G1 to G3. Install RAMS and

TERBLANCHE Johannes Jochemus – IMCA Class II / Air Tech / Underwater Welder

Page 2 of 4
ADS-HR-FM-02

TERBLANCHE Johannes Jochemus

IMCA CLASS II / AIR TECH / UNDERWATER WELDER

brakes on LARS. Prepare LARS for ABS load testing. Rewire all 3 phase plugs to the same connection sequence.
Prepare pad eyes for MPI. Wire cut backs on LARS. Full mobilisation of system 3 to Glory Barge.
BS Divers Hermanus 06/2015- Diver, Dive
Training/Construction
12/2016 technician
Job Description: A2.1 and A2.2 servicing of various Kirby Morgan helmets. MWP leak testing of dive panels, repair
where necessary. Replaced pressure gauges and setting of PRVs. Inspecting of lifting bags.
ABJ Welding- Underwater Hermanus 18/02/2016- Technician,
Training/Construction
welding specialists 04/05/2016 Instructor
Job Description: Installing of additional Lincoln Electric Flextec 450 welding machine. Installing of Outland camera
and light system to Kirby Morgan 37. Servicing of filtration system and replacing of leaking piping. Instructing of
underwater welding course to AWS D3.6M-10 class B standard with Lloyds Register approval.
ABJ Welding- Underwater Hermanus 07/01/2016- Technician,
Training/Construction
welding specialists 14/02/2016 Instructor
Job Description: Designing and welding of umbilical racks. Changing of two diver air panel to a two diver + standby
diver air panel. Replacing of internal battery and fuse on AMRON communications box. Kirby Morgan A2.2 servicing.
Instructing of underwater welding course to AWS D3.6M-10 class B standard with Lloyds Register approval.
ABJ Welding- Underwater Hermanus 06/08/2015- Technician,
Training/Construction
welding specialists 08/11/2015 Instructor
Job Description: Full installation of air diving spread in to ABJ Welding premises including the 3m dive tank.
Installation of filtration system for the dive tank as well as solar heating system. Complete umbilical make ups,
maximum working pressure leak testing of airline and pneumos. Potting of communications cables and function
testing of communications. Chipping and painting of dive tank with pneumatic needle gun. Instructing of underwater
welding course to AWS D3.6M-10 class B standard with Lloyds Register approval.
ABJ Welding- Underwater Hermanus 12/06/2015- Technician,
Training/Construction
welding specialists 04/07/2015 Instructor
Job Description: Designing and fabricating of welding bays. Installation of 3 phase electrical sockets to welding
bays. Installing isolation switches on welding circuit. Make up and installation of welding circuit, ensuring all electrical
connections are mechanically sound and fully insulated. Installation of electrical plugs and lights within the premises.
B.S Divers Hermanus 09/04/2015- Technician,
Training/Construction
08/06/2015 Instructor
Job Description: Servicing of HP compressor- replaced compressor oil and filters, compressor is driven by a Datsun
motor. Cleaning and servicing of the carborator. Replacing of axle on trailer, installing LP compressor and receiver
pig to the trailer. Fabricating of umbilical brackets on the trailer. Servicing of Yamaha outboard motor. Working as
skipper on board small craft vessel operating between shore and the diving vessel Ocean Swift.
B.S Divers Hermanus 04/01/2015-
Diver/Technician Training/Construction
08/03/2015
Job Description: Greasing of wet bell and clump weight cables. Installing of HP pigtails to cylinder bank, MWP leak
testing. Servicing of Hydraulic power pack, replaced quick connect fittings and hydraulic oil. Replaced coupler on the
drive shaft. General maintenance as per the PMS system.
B.S Divers Hermanus 07/11/2014-
Diver/Technician Training/Construction
05/12/2014
Job Description: Replacing of DDC door O’rings. Servicing of DDC HP banks pillar valves. Replacing DDC HP ¼
turn valve with a needle valve. Painting of DDC inside and outside with specialised DDC paint. Servicing of Honda
petrol motor.
B.S Divers Hermanus 01/10/2014-
Diver/Technician Training/Construction
04/11/2014
Job Description: Mobilisation of small craft vessel. Installation of 400L LP receiver tanks with 4 x 50L cylinders HP
back up. Install LP compressor and HP compressor onboard vessel. Do a complete D040 on SRP dive system. Install
new Port and Starboard lights onboard vessel.
TERBLANCHE Johannes Jochemus – IMCA Class II / Air Tech / Underwater Welder
Page 3 of 4
ADS-HR-FM-02

TERBLANCHE Johannes Jochemus

IMCA CLASS II / AIR TECH / UNDERWATER WELDER

B.S Divers Hermanus 18/08/2014-

Diver/Technician Training/Construction
26/09/2014
Job Description: Maximum working pressure leak testing of pipe works and fittings on HP banks. Installation of
additional HP bank consisting of 8 50 litre cylinders. Remounting of LP compressor with petrol motor, adjusting
pulleys to correct setting. Changing out of oil and filters on LP compressor, replacing gasket on first stage.
B.S Divers Hermanus 10/07/2014-
Diver/Technician Training/Construction
14/08/2014
Job Description: Pressure testing of umbilical’s to 1.5 times max working pressure. Potting of communications
cables. Servicing of Tescom regulator for DDC. Setting of PRVs on 4 diver dive panel and HP compressors. Depth
gauge calibrations. A2.1 and A2.2 servicing of Kirby Morgans.
B.S Divers Hermanus 05/06/2014-
Diver/Technician Training/Construction
04/07/2014
Job Description: Diver: Removal and installation of Rudder from Whale cruiser using come-a-long and pneumatic
grinder. Tack weld Rudder back in to place as well as install nuts and bolts.
Technician: Servicing of 1st and 2nd stages. Servicing of Bauer HP compressor oil and filter change outs. Servicing of
4 diver panel, replacing of one way valves. Updating of PMS system.
B.S Divers Hermanus 27/04/2014-
Diver/Technician Training/Construction
30/05/2014
Job Description: Diver, cleaning of moorings with HP water jetting of mooring chains and shackles. Moving of 6 ton
mooring blocks to new mooring area for vessel. Installing stainless steel brackets to jetty wall using hydraulic core
drill and chemical bolts. Clearing of marine growth with H.P water jet. Inspecting of moorings.
Technician: Service and repairs on Kirby Morgan 18 bandmasks, 27, 37 and 77 Stainless steel REX. Replacing of
communication cables on umbilicals, soldering of marsh marine fittings.
B.S Divers Hermanus 05/01/2014-
Diver/Technician Training/Construction
08/03/2014
Job Description: Searching for sunken vessel, circular and pendulum searches, using magnetometer and probing
with metal rods. Technician, servicing and repairing of L.P dive panels. Testing and repairing of communications
system on DDC. Hydrostatic and visual testing of cylinders.
B.S Divers Walker bay 22/09/2013-
Diver/Technician Training/Construction
Hermanus 04/12/2013
Job Description: Abalone farm 40 inch water intake pipes installation. Installing of cage around the intake pipes
nozzle. Used hydraulic core drill to drill the holes for the chemical bolts underwater. Used tirfors to move the pipes
and cage parts in to place.
B.S Divers Hermanus 15-22/09/2013 Lead Diver Construction
Job Description: Locating of mooring blocks, airlift 3 ton mooring blocks clear from mud, use 4 ton Lifting bags to
move mooring blocks in to position. Full mooring installation with shackles, chains and buoys. Taking photos of
completed installation and setting up of report for client.
Hermanus 01-12/09/2013 Construction, mooring
BS Divers Diver
installation
Job Description: Removal of old mooring chains and buoys. Installation of new mooring chains and shackles to
buoys and mooring blocks. Taking photos of completed installation and setting up report for client.

TERBLANCHE Johannes Jochemus – IMCA Class II / Air Tech / Underwater Welder

Page 4 of 4
Scanned by CamScanner
ADS-HR-FM-02

Resume Conrad Frederik Heydenreich

HSE Part 1, Air Diver, Welder, DMT, IMCA Trainee Supervisor,
Skipper, Rigger.

PERSONAL DETAILS

NAME (AS ON PASSPORT) Conrad Frederik Heydenreich

DISCIPLINES Welder, DMT, Lead diver.
NATIONALITY South African
DATE OF BIRTH 29/08/1972
PASSPORT #M00220624 Exp: 04/06/2027
SEAMAN’S DISCARGE BOOK #35702
BRITISH SEAMANS’S CARD
CONTACT NUMBERS +234 805 520 9052
EMAIL ADDRESS p.holmes@ads-ng.com ; c.seaton@ads-ng.com
NEAREST AIRPORT (60mins to residence) George (GRJ)
HSE DIVERS MEDICAL 08/01/2020

PROFESSIONAL QUALIFICATIONS
HSE SURFACE SUPPLY Part 1 Cert No. CS01/1524/195
IMCA DIVER MEDICAL TECHNICIAN Cert No. C-DOCDM/180305-01R Exp: 2020-04-30
AMSI/AWS D3.6M2010 - CLASS B
AWS D3.6M-10 2010 - CLASS B
IMCA TRAINEE AIR DIVING SUPERVISOR Cert No. C-DOCTADS/220416-02 Exp: 2019-04-21

SAFETY TRAINING

OFFSHORE EMERGENCY TRAINING Cert No.3558/5858/131218/0001 SAL Exp: 12/12/2022

Incl. FIRST AID, EBS & HUET

ACADEMIC QUALIFICATIONS
Matric

SKILLS & EXPERIENCE SUMMARY

I have 8 years offshore experience in both Inspection & Construction. I have 5 year Civil Diving experience.
Have Also completed TOTAL 12 golden rules.

I am ex SA Navy (7years) and have good experience offshore with DC wet welding, broco cutting and various
construction methodology.

I am confident I have the work ethic and ability to provide a high quality service delivered on time and in a
professional manner. I operate well within a team and always regard safety as of paramount importance.

Resume Conrad Frederik Heydenreich

HSE Part 1, Air Diver, Welder, DMT, IMCA Trainee Supervisor, Skipper, Rigger.
Page 1 of 3
ADS-HR-FM-02

Resume Conrad Frederik Heydenreich

HSE Part 1, Air Diver, Welder, DMT, IMCA Trainee Supervisor,
Skipper, Rigger.

OFFSHORE EMPLOYMENT HISTORY

Company / Client / Dates / Project Type
Position
Vessel Location Duration Construction/Inspection
Octomar Total / Technip
Jan 2019 –
Posh Skua / Koamba Sul / Saipem Lead Diver Construction
Feb 2019
Angola
Job Description: Riser installations x 16. Using Hydratight jacks. M46, M56, M64 bolts. 16 643 Psi = 1332 bar @
100% pass.
Octomar Somoil Sept 2018 –
Diver Construction
Mamola Champion Angola Nov 2018
Job Description: Riser installations - 12inch. Plidco installation on leaking pipe.
Octomar Total / Technip
June 2018 – Lead Diver &
Posh Skua / Koamba Norte / Saipem Construction
July 2018 DMT
Angola
Job Description: Riser installations x 16. Using Hydratight jacks. M46, M56, M64 bolts. 16 643 Psi = 1132 bar @
100% pass.
Octomar
Venus / Koamba Norte Total / Technip April 2018 –
/ Saipem May 2018 Diver Construction
Angola

Job Description: Mooring chain standby if needed.

Octomar OPS / SBM /
Aug 2017 –
Tricia K N’Goma FPSO DMT Inspection
Sept 2017
Angola
Job Description: Mooring chain inspections. 8 x chains. 5m intervals up to 30m.
Octomar OPS / SBM /
April 2017 –
Pacific Diligence N’Goma FPSO Lead Diver Construction
May 2017
Angola
Job Description: Replacing floating / surface SBM hose. 2 x 20 inch & 4 x 16 inch. [2 x Tanker rail hoses] Repair
damaged areas on remaining hoses. Install 7 x floating beads. [3 x 799mm / 260kg & 4 x 697mm / 190kg.]
Octomar
Technip Oct 2016 –
Kathy K Air Diver Welder Construction
Angola Nov 2016

Job Description: Dredging [Airlift & 6” gravel pump] mud to expose mooring piles. Disconnect & reconnect
55T shackle to chain. Modify & weld 8 anodes onto piles.
Halul Offshore Services Qatar
July 2015 –
Company Petroleum Air Diver Welder Construction & Inspection
March 2016
Halul 41 Qatar
Job Description: SBM subsea hose change out. HP water jet riser clamps for CP & UT inspections. Also Photo &
Video report. Weld jumper plates for conductivity. Broco damaged fender channel, fit new one and Broco holes in
correct positions. Use hydraulic impact wrench to tighten bolts on fender channel.
Zamil Mermaid Offshore
Aramco Oct 2014 –
Services Air Diver Welder Construction & Inspection
Saudi Arabia July 2015
Zamil 601

Resume Conrad Frederik Heydenreich

HSE Part 1, Air Diver, Welder, DMT, IMCA Trainee Supervisor, Skipper, Rigger.
Page 2 of 3
ADS-HR-FM-02

Resume Conrad Frederik Heydenreich

HSE Part 1, Air Diver, Welder, DMT, IMCA Trainee Supervisor,
Skipper, Rigger.

Job Description: Exothermic Welding (Cadweld) of anode cables onto structures. Grit blasting welds on Jackets for
inspection, pen checks on Jack-up rigs, Seabed surveys. Pipeline buoying, surveys & inspections. Airlifting sand
under 16” pipeline and installing PLIDCO.
Leighton Offshore Pertamina Oct 2013 –
Air Diver, DMT Construction
Leighton Stealth Indonesia Nov 2013
Job Description: Laying of 12 inch pipeline. Stinger & Profile checks. Riser flange tie in. Capture AX-ring (gasket).
Leighton Offshore South Oil
Leighton Eclipse Company July 2013 –
Air Diver, DMT Construction
(SOC) Sept 2013
Iraq
Job Description: Remove blind flanges on PLEM & SPM and then install new 24 inch subsea hoses using, High
torque tool, Hydratight tool, Turfers, Impact wrench. Including installation of Hydraulic & Electrical subsea
connections on penetrator panel.
Stappem Offshore ESSO
May 2013 Air Diver, DMT Construction
Luzolo Angola
Job Description: Remove Surface hose on SBM, replace one damaged section, and refit hose on SBM.
Algosaibi Diving & Marine
Saudi Aramco
services Aug 2011 –
Saudi Arabia Air Diver, DMT Construction & Inspection
Algosaibi 26, Rimthan 2, Oct 2012
Algosaibi 42, Atla, Algosaibi 25
Job Description: Installing anodes, Remove old anodes on Jacket using Broco, Weld new Anodes on & continuity
welds, SPM subsea hose change outs, SPM monthly maintenance, Hydraulic grind proud locations on conductor,
Remove mooring rope from VSP’s, Install Boat landing & riser guard on Jacket, Pre & Post pen checks on Jack up
barge, Scrapping, Prep pipeline for Plidco installation, CP readings (Cathode protection), Sea bed surveys, Grit
blasting on Jackets & for U-weld inspections, buoying.

Resume Conrad Frederik Heydenreich

HSE Part 1, Air Diver, Welder, DMT, IMCA Trainee Supervisor, Skipper, Rigger.
Page 3 of 3
 012345ÿ78958238
!0ÿ4Nÿ6789:;OÿÿPP'QR'0ÿS)#PR-P'*ÿ(ÿT)       ÿ    
ÿU20)T.'!ÿ4"$(-0'ÿ4#('R2ÿ,)#-!-!.ÿS)T.)#V*

<ÿ===ÿ>?ÿ@ ÿA>BÿCDÿEFAÿGDGHÿÿGDCIÿÿJ<ÿ>ÿKLDHMG
$*Tÿg!Th!ÿ#*ÿUi4ÿ,)#-!-!.
?ÿ=ÿÿWWXÿÿCÿE>=>ÿÿYMCÿEZ[\ÿÿ=>ÿ=>ÿWÿ>?ÿEÿ]W>^>ÿÿ
ÿ_`=ÿ>?ÿÿA>ÿZX^>ÿ>?ÿW=>ÿYAZ \ÿY==>>ÿaÿHbb\
GcHdGbIGCbebCC dfGbfCHGc

jklmÿopqrÿstuvÿswxtyÿjjzÿsx{xÿ|p}}y~v€ÿml‚l
ƒzzz„ÿlms€†‡ÿƒˆjll„ÿr‰ÿzŠÿl‚zjˆ
‹ttqŒŽŽuŒpyt~w‘}x{xty’u“r{
4P#!ÿR+-*ÿPT0'ÿT)ÿ”-*-Rÿhhh:*#('R2"!$-V-R'0:PTV•”ÿRTÿ”')-(2ÿP')R-(-P#R':
!!"#$ÿ&'()'*+')ÿ,)#-!-!.ÿ&'/"-)'0ÿ12ÿ345ÿ6789:;
 012345ÿ78958238
ÿÿÿ
0ÿÿ123ÿ45ÿ67ÿ8952ÿ:;ÿ48ÿ<;<=><?@AB
P&)ÿ,QQÿ*!,!(ÿR*SPÿ,&)ÿ.TPÿU(VWQ,!'&XÿPXÿY(QQ
3ÿ9ÿÿCÿÿ<ÿ22ÿ79ÿA=><ÿDEBÿÿ29ÿ92ÿÿ23ÿ5ÿF2G2ÿÿ
ÿH9I5ÿ7523ÿÿ82ÿDCG25ÿ7523ÿ52ÿA8D7BÿA22ÿJÿ=??B
<K=L<MM=:?N?:: LO<MO:=<K

Z[\]ÿ_`abÿcdefÿcghdiÿZZjÿchkhÿl`mminfopÿ]\qr\
sjjjtÿ\q]ucpvwÿsxZ\\tÿbyÿjqzÿ\qrujqZx
{dda|}~~e|`€idngmhkhdi‚eƒbk
*-,&ÿ!„'Xÿ-)(ÿ$ÿ'X'!ÿ†††‡X,#(!/W&Q'ˆ'!()‡-ˆ‰ÿ!ÿ($'#/ÿ-($!'#'-,!(‡
 !ÿ#$ÿ% &#'&()ÿ*+,-(ÿ.&!$/
ADS-HR-FM-02

HAYES Ross Kenneth

HSE Part 1 / IMCA DMT / WELDER / BANKSMAN & SLINGER

PERSONAL DETAILS

NAME (AS ON PASSPORT) Ross Kenneth HAYES

DISCIPLINES HSE Part I / DMT / Welder / Banksman & Slinger
NATIONALITY British
DATE OF BIRTH 1991-11-15
PASSPORT 546069488 Exp: 2028-10-25
SEAMAN’S DISCARGE BOOK DB00102802
BRITISH SEAMANS’S CARD
CONTACT NUMBERS +234 805 520 9052
EMAIL ADDRESS c.seaton@ads-ng.com
NEAREST AIRPORT (60mins to residence) London
HSE DIVERS MEDICAL 2019-10-30

PROFESSIONAL QUALIFICATIONS

HSE SURFACE SUPPLY Part 1 Cert No. COM/556225/09

IMCA DIVER MEDICAL TECHNICIAN Cert No. DMT-080-001 Exp: 2020-04-22
OXYGEN PROVIDER Cert No. DMT-080-001 Exp: 2020-04-22
RYA POWERBOAT Cert No. 9608297
AWS D3.6M Cert No. RED-WPQ-RH-3F-6
Cert No. RED-WPQ-RH-3F-10
CONSTRUCTION SKILLS Cert No. 03766255 Exp: 2020-06

SAFETY TRAINING

OFFSHORE EMERGENCY TRAINING Cert No. 1358580801161135913 Exp: 2020-03-26

Incl. FIRST AID, EBS & HUET
FIRST AID Cert No. DMT-080-001 Exp: 2021-04-22
MIST Cert No. 5311-1203142 Exp: 2020-01-09

ACADEMIC QUALIFICATIONS

SKILLS & EXPERIENCE SUMMARY

Since 2008 I have been working as a diver and have a lot of experience working offshore and onshore from working
on Oil & Gas structures to being in the work shop repairing & maintaining dive equipment. My experience is vast I’m a
wet welder with multi pass hydroweld coding’s and have also worked with a wide range of subsea equipment.

Ross Kenneth HAYES - HSE Part 1 / IMCA Diver Medic Technician / WELDER / BANKSMAN & SLINGER
Page 1 of 4
ADS-HR-FM-02

HAYES Ross Kenneth

HSE Part 1 / IMCA DMT / WELDER / BANKSMAN & SLINGER

OFFSHORE EMPLOYMENT HISTORY

Company / Client / Dates / Project Type
Position
Vessel Location Duration Construction/Inspection
JMT/
Navante Oil & Gas Jan 2019 DMT Diver
FPSO Inspection
Nigeria, Gulf of Guinea March 2019 & Deck Leader
MYSTRAS
Job Description: U Wild inspection of hull, Inspect, repair, clean and replace sea chests, Paint hull underwater
Vertech Nigg Energy May 2018
Welder Diver Construction
Equinox Invergordon June 2018
Job Description: Welding 18tonne bow fender. 24x brackets (welding vertical downs multi pass 4.0 hydroweld
rodes)
James Fisher & Sons Prysmian
May 2018 Dmt Diver Construction
Atlantis Irish Sea
Job Description: Repair Damaged Submarine Cable 14 miles offshore. Cut out damaged cable and re
splice new cable.
ADAMS Saudi Arabia
Jan 2018
Offshore/ vessel: Persian Gulf Lead Diver DMT Construction/ inspections
March 2018
algosaibi 42 QIPP
Job Description: Sea bed Survey, search and locate pipeline C4 Manholes 1- Offshore Riser, Air lifting buried
Manholes, inspections and video surveys of Choline Pipe, removal and installation of chlorine line inside pipeline C4,
instillation of 2 x spool sections and resin fix 8x chlorine line brackets to internal wall of pipeline. Install 2 x
environmental monitoring beacons. Removal of chlorine line inside offshore riser C4.
SeaTech Diving/ Vessel: Rampion
C-Fenna Offshore July 2017
DMT Diver Construction
Windfarm Sept 2017
EON
Job Description: Mobilization of dive control, chamber and LARS System onboard vessel. Install 14 x piggy back
clamps to J tube and installing 2 x clamps and 1 x deflector to VDM. Helping with fibre optic cable pull from substation
to shore.
ADAMS
Saudi Arabia, Persian Feb 2017
Offshore/ vessel: DMT, Diver Construction
Gulf, QIPP May 2017
algosaibi 42
Job Description: Cleaning internally 3 X 1.2 km Pipelines 4metres diameter - Cleaning and inspecting 3x chlorine
Pipes 1.2km length - Airlifting debris - Replaced 2x spool pieces, Ships Anchor Recovery.
Brasal Marine/ vessel: Marek, EDT Offshore, Oct 2016
Air Diver Inspections
Brasal Supporter Cyprus Nov 2016
Job Description: U-Wilds - Hull cleaning - propeller polishing - Rudder cleaning - Sea Chest Cleaning - Brush Karts,
Cavi blasters 2000psi
FSDS LLC/ vessel: Caspian Sea, Shell, April 2016 Lead Diver,
Construction
Castro 16 NCOC July 2016 DMT
Job Description: pipe lay vessel - Trenching 28" & 18" Oil and Gas Pipelines - connecting and disconnecting
pulling head to vessel - connecting and disconnecting TRM, TRS & Sliding Buoys - replacing grommets on piles
FSDS LLC/ vessel: Caspian Sea, Shell, Aug 2015
Tech / Air Diver Construction/ Inspection
SWTB NCOC Dec 2015
Job Description: mobilisation of dive equipment on vessel CASTORO 16 - Servicing of Kirby Morgan dive helmets
18 & 37 - Pipe laying and trenching of 28" Oil and Gas pipelines - pipelines and pulling head inspections
Jones Marine And Dec 2017
Nustar & Cemex Diver Construction/ Inspections
Technologies Jan 2018

Ross Kenneth HAYES - HSE Part 1 / IMCA Diver Medic Technician / WELDER / BANKSMAN & SLINGER
Page 2 of 4
ADS-HR-FM-02

HAYES Ross Kenneth

HSE Part 1 / IMCA DMT / WELDER / BANKSMAN & SLINGER

Job Description: Power Cable Lay, from jetty to mooring dolphins. Instillation of CPS to dolphins for Nustar. pile
inspections with Cygnus and remedial works to repair defects in piles. Instillation of 4x half shell brackets and fill with
concrete for cemex.
Constructex Nov 2017
London City Airport Diver Construction
Dec 2017
Job Description: Instal Fish net habitats to mooring dolphins next to runway tarmac. Drill and fix chemical anker
bolts with hilti resin. And secure fish nets to bottom of river bed with concrete blocks/ chain.
Dive Tech UK Sewage Treatment November
Diver Construction
Works 2017
Job Description: Instal and remove Bung to 3 x Turbine intakes inside Stage 1 Sewage treatment works
Robert Nicholas Diver/ Safety
Network Rail October Construction
Inspections Boat Skipper
Job Description: Instal and remove river dams and flumes across the UK for network Rail, Safety Boat skipper for
remedial bridge works in Norwich.
PPF Servicing Councils & Private May 2017 Diving Construction &
Clients July 2017 Supervisor Inspections
Job Description: PPF Servicing Maintain moveable Swimming pool floors across the U.K, Scotland and Ireland. My
role at PPF was to Supervise dives, fill out daily paperwork, write quotes, attend meetings with clients and discus
outcomes to problems and resolve them.
Constructex July 2015 -
ABP Air Diver Dredging
August 2015
Job Description: Dredging 2.5 metres depth of Silt/Mud from bottom of sea lock gates with a 6 inch hydrainer pump
- underwater chainsaw cutting and rigging of the 100 year old gates
South Bucks Diving London Olympic Park, January 2015 Air Diver, Underwater Burning/
Services Environment Agency - June 2015 Confined Space Inspections
Job Description: Burning 140 Larson piles at the London Olympic Park - Burning 92 Larson Piles at Hampton court -
survey inspection of barking power station intake and outfall de watering caps - Inspection of Molsey (A) Weir Larson
Piles using Cygnus UT Readings - Confined Space tunnel and flap gate inspection, carried out repairs to broken
pulley supports chains
Abwood Group Air Diver,
Nov 2014
Contractors Cross rail Underwater Construction
Dec 2014
Burner
Job Description: Air lift River bed around piles - Positioning and detachment of 100tonne U tube pipe - Burning
precised holes through walkway structure into piles and drilling the internal concert foundation with cp9/ Hammer drill
- anker bolt with hilti resin
Medway Diving November
Coryton refinery Air Diver Dredging
Contractors 2014
Job Description: Mud pumping fire intakes at Coryton refinery - propeller clearance on vessel islay trader
Hughes Sub Surface Full time
Enviroment Agency,
Engineering Sep 2012 employed air Construction &
British waterways and
Oct 2014 diver, inshore Inspections
canals trust
supervisor
Job Description: Full Time Employed Air Diver And Inshore Diving Supervisor
I was employed at Hughes as an air diver and inshore diving supervisor. I carried out all of the servicing and
maintenance schedules on dive equipment for the southern office, and was also involved in daily office duties. I
supervised inshore diving projects and worked on various Jobs for the environment agency and British canals trust.
Jobs included seabed clearances, underwater burning. Preforming boat salvages up to 120tonnes, installing pre cast
concrete moulds for bridge works, installations of pipe bungs to outfalls, Lock inspections, weir inspections,bridge
surveys, cofferdam installations, safety boat rescue, Rov inspections, mattress- gabyion laying and scour protection.

Ross Kenneth HAYES - HSE Part 1 / IMCA Diver Medic Technician / WELDER / BANKSMAN & SLINGER
Page 3 of 4
ADS-HR-FM-02

HAYES Ross Kenneth

HSE Part 1 / IMCA DMT / WELDER / BANKSMAN & SLINGER

Dutch Underwater Diving Sep 2011 Welder, Air Construction &

Europe, Africa
Contractors April 2012 Diver Inspections
Job Description: Republic of Mauritania Nouhadibou welding 150 anodes to jetty support columns - Rotterdam port
Replacing anodes on piles - Ship surveys and House boat insurance inspections - Various Civils work around
Holland, France and Belgium. Iinstallation and maintenance of moveable swimming pool floors and booms Including
London Olympic Park swimming pool and training pool.
OTN Diving Netherlands July 2011
Holland, Hardewijk Air Diver Construction
Sept 2011
Job Description : working inside a build pit using a 300ft per hour airlift hydrainer pump which was held into place
via a tower crane to make the pit bed profile 4meters deeper. Nitrox diving with in water stops.
Red 7 Marine River Thames, VOPAK
June 2011 Air Diver Construction
Oil and Gas
Job Description : Changing fenders on mooring points at VOPAK Oil And Gas - Preparing foundations for the new
terminals on the Emirates cable cart.
C.O.W Diving Dec 2010 Welder Air
Holland Construction
Netherlands May 2011 Diver
Job Description : Fabricating and laying steel sheets into position - welding steel sheets together to strengthen
foundations - Concrete pouring using a surface pump, Nitrox diving.
Andark Diving Services Sept 2010
Isle of wight Air Diver Construction
Nov 2010
Job Description: Sand Down Pier, replacement of anodes to pier support columns and cross members
Valkyrie Diving Services March 2010 -
Brighton Air Diver Construction
June 2010
Job Description: Measuring and fitting support cross members to Brighton pier - Installing concrete jackets around
bottom of pier support legs - Replacing Hydraulics on shoreham port lock gates
Diver Uk International Safety Boat
July 2009
Various skipper, air Inspections
Dec 2009
diver
Job Description: Diving survey Hartlepool Harbour, Break Water & Marina - Safety boat jobs for local councils and
construction companies.
N.D.U.S Outer heberadies, Dec 2008 -
Air Diver Inspections
Scotland May 2009
Job Description: Fish farm Cleaning the nets - Repairing holes in the nets - Inspecting the fire ring weights.

Ross Kenneth HAYES - HSE Part 1 / IMCA Diver Medic Technician / WELDER / BANKSMAN & SLINGER
Page 4 of 4
ADS-HR-FM-02

VERSTER Jurie Hendrik

Air Diver / Welder

PERSONAL DETAILS

NAME (AS ON PASSPORT) Jurie Hendrik Verster

DISCIPLINES Diver / Welder
NATIONALITY RSA
DATE OF BIRTH 1990.05.17
PASSPORT A06775958
SEAMAN’S DISCARGE BOOK SRB-9010912-B
BRITISH SEAMANS’S CARD /
CONTACT NUMBERS +234 805 520 9052
EMAIL ADDRESS p.holmes@ads-ng.com ; c.seaton@ads-ng.com
NEAREST AIRPORT (60mins to residence) Cape Town International
HSE DIVERS MEDICAL 2019-07-15

PROFESSIONAL QUALIFICATIONS
HSE SURFACE SUPPLY Part 1 Cert No. Class2-10/08/2013
CSWIP 3.1u UNDERWATER INSPECTOR Cert No.249435/2 Exp: 2021-10-24
CAT B SKIPPER Cert No. SVC-0023547-S
AWS D3.6:2010 CLASS B WELD Cert No. 021801 Exp: 2020-07-12

SAFETY TRAINING

OFFSHORE EMERGENCY TRAINING Cert No. 3558/5700/270818/0002 Exp: 2022-08-28

Incl. FIRST AID, EBS & HUET
FIRST AID LVL III Cert No. Exp: 08/07/2019
CA-EBS Cert No. 3558/5902/290319/0005

ACADEMIC QUALIFICATIONS

SKILLS & EXPERIENCE SUMMARY

I Have more than 8 years diving experience where I started my career as a SA Navy diver for three years. I did my
Class2 in 2013 where before that I gain a lot of experience in many different fields of diving (construction, welding,
inspection, shipping, Civils, Diamond, Scientific, Instructor and Supervising). I gained a lot of welding experience in
the last year where before that I did a lot of inspection work as 3.1u. I am also a qualified DOL IMCA 50m inshore
supervisor where I have successfully supervised more than 100 dives to 50m alone and have thousands of hours
supervising. I have experience in treating divers in chambers and assisted in many diving emergencies over the
years. I am very positive than I will be a great benefit to your company and always work in a professional manor and
have good work ethics. I am good with time management and production is key. I am a good team player and get
along well with people as I learnt these skills in the Navy and also working as commercial diving instructor for a few
years with different divers from all over the world. I am all about safety as it is nr1 on my books.

Jurie Hendrik VERSTER – Air Diver / Welder

Page 1 of 4
ADS-HR-FM-02

VERSTER Jurie Hendrik

Air Diver / Welder

OFFSHORE EMPLOYMENT HISTORY

Company / Client / Dates / Project Type
Position
Vessel Location Duration Construction/Inspection
AMSOL/ Chevron/ Cape 14-03-2019 to
Welder Diver Construction
Quay Repair town present
Job Description: Structural underwater welding. Welding supports and gussets between wall and beams to support
and strengthen structure that was placed into water with crane to stop oil spill from quay wall that will be filled with
concrete behind frame. Fabricated steel pieces to be welded in after taking measurements underwater to stop
concrete pour from leaking out. Topside welding and cutting with oxy-acetylene torch. Visual inspecting on all welds
underwater. Precision block placing off concrete slabs inside H-beams to create temporary wall and being filled with
concrete between existing wall and new placed blocks.
Cape Diving Aquatic
28/02/2019 to Supervisor /
enterprises and Construction & Inspection
13/03/2019 Welder Diver
development
Job Description: Welding repairs on quay wall. Welding 12mm plates onto piles for concrete poor and repairs. Used
dogs and wedges to draw plates flush for welding. Airlifted bottom deeper to fix plates, and cleaned piles for plates to
be welded on (Barnacle buster and scrapers). Inspections on Sheet piles and King piles, GVI and CCTV inspection
for defects and placement of plates. In water placement of plates with crane operations. Concrete pour with tremi-
tube. and final inspections on all plates and welds before 3d party inspection (GVI, CVI of welds).
Gamco
Abagold February 2019 Diver Construction

Job Description: Deepening of abalone farm sump area for cleaner water for intake to abalone. Dredging with 8’’
pump and 4’’, loosening rocks and mud. Drilling holes for NONEX and blasting rock. Removing rocks with excavator
and pumping out water from backfill
Barracuda diving and Marine
27-10-2018 to Welder Diver /
Services/ Bam Construction
06-01-2019 Supervisor
Blue Sea
Job Description: Supervising a harbor wall welding repair job. Overall supervisor of both teams and supervising
direct from the Dive station onboard a barge. Supervising welding works, airlifting, cleaning of piles, grit blasting of
welds for MPI inspection, inspections on plates and CVI inspections on welds, Placement of plates with crane and
Broco-cutting of old plates. Also supervising pouring of concrete behind plates using Tremi-pipes
Barracuda diving and Marine
19-10-2018 Welder Diver,
Services/ Bam Construction & Inspection
27-10-2018 Lead Diver
Blue Sea
Job Description: Welding repairs on quay wall including welding of sacrificial anodes.
Welding 12mm plates onto piles for concrete poor and repairs. Used dogs and wedges to draw plates flush for
welding. Airlifted bottom deeper to fix plates, and cleaned piles for plates to be welded on (Barnacle buster and
scrapers). Inspections on Sheet piles and King piles, GVI and CCTV inspection for defects and placement of plates.
In water placement of plates with crane operations. Concrete pour with tremi-tube, and final inspections on all plates
and welds before 3d party inspection (GVI, CVI of welds). Grinding and welding of cracked welds, welding of
sacrificial anodes
AMSOL Cape Town 08-10-2018 to
Chevron shell Welder diver Construction
10-10-2018
Job Description: Welding off 18mm cover plate (4m x 1.5m) to sheet piles for concrete poor. Using 8mm angle iron,
re-bar and flat bar to cover up small holes. Welding braces between 3d and 2nd last cover sheet for stability (8mm
angle iron 3x 1m pieces) in mid water.
Subtech Group/ Monwabisi
Inspection and
RHIB Desalination October 2018 Diver
maintenance
plant
Job Description: PLEM: Cleaning and visual inspection of intake manifold for desalination plant, welding of
sacrificial anodes onto intakes and securing piles

Jurie Hendrik VERSTER – Air Diver / Welder

Page 2 of 4
ADS-HR-FM-02

VERSTER Jurie Hendrik

Air Diver / Welder

BS Divers / Vrede DAFF April 2018 Diver Scientific diving

Job Description: Side scan of seabed from vessel looking for right bottom topography and research diving for
scallops.
GMC Diving and salvage Jan 2018-Jun Inspection, Shipping,
Many clients Diver/ Supervisor
2018 Salvage
Job Description: All Work in harbor and inshore. Ships husbandry. Docking of vessels (Synchro lifts and dry
dockings). Seabed, Hull, Propeller, Rudder, Sea chest, quay wall surveys and inspections. UWILD inspection.
Hydraulic grinding of rails and shafts for welding. Welding Of Anodes on vessels and Semi-Sub Drill rig, Including
welding of rope cutters on quartz nozzles, grit blasting for MPI inspection CCTV inspections. GVI Inspections.
Inspection and cleaning of sea chests. Salvage of vessels, Broco cutting and working with overhead cranes while
rigging pieces of vessel. Maintenance of diving gear and identifying problems on site and fixing them. Supervising
dives involving inspections of quay walls and general harbor work. Cleaning of many different vessels using hydraulic
and hand tools including anode replacement and plate welding of damaged areas. Done emergency repairs on boat
shafts. Jetty and quay wall repairs at Robben Island. Pipeline Installation of desalination plant.
Brummer Engineering Scanline Water
Nov-17-Jan-18 Welder Construction
Works System
Job Description: Welding of new sluice gate brackets and installation of guides, remove and install new turbines,
Inspect intakes on pump station including cutting out and weld new scouring plates.
BS Divers Training, Dockings,
Instructor/
DOL School 2013-2017 Abalone quota, scientific
Supervisor/Diver
diving
Job Description: Skipper the boat for abalone diving. Supervised Abalone diving operations and on other days I
dived myself taking out abalone for the farms in Hermanus.
Fred de Pouw diving services Municipality March 2013 Diver Cleaning and inspection
Job Description: CCTV Visual inspection of ladders and fittings inside drinking water reservoir. Dredging and
cleaning of drinking water reservoirs. Confined entrance and minimal visibility
Sept 2012-
Seasonsfind 1 Alexcor Diver Diamonds
Feb 2013
Job Description: Maintenance and service of diving gear, compressor, classifier and pumps. Replaced bearings and
painted the classifier. Dredging and diving for diamonds. Basic rigging around big boulders and the use of tirfors and
tractors to remove big rocks.
SA Navy/ RHIBS Government 2012 Diver Military
Job Description: Searching for body and safety divers in Midmar mile swim race.
SAS Simonsberg/ Submarine Government 2012 Diver Military
Job Description: Inspection and docking
SAS Simonsberg/ Amatola Government 2011 Diver Military
Job Description: Sea chest clean and hull inspection
Durban- bluff/ Barracuda
Government March 2011 Diver Military
boats(special forces boat)
Job Description: Seabed searches
Durban/ SAS Mendi Government March 2011 Diver Military
Job Description: hull search and inspections
Nov2010-
Durban/ Harbour Government Diver Military
march2011
Job Description: Dockings, Searches, cleaning and maintenance

Jurie Hendrik VERSTER – Air Diver / Welder

Page 3 of 4
 Resume NAME:- PEDRO ABEL
HSE/IMCA CLASS II, UNDERWATER WELDER (MMA)

PERSONAL DETAILS

NAME (AS ON PASSPORT) PEDRO ABEL GBENGA

DISCIPLINE COMMERCIAL DIVER / UNDERWATER WELDER
NATIONALITY NIGERIAN
DATE OF BIRTH 15th APRIL,1982
PASSPORT NIGERIAN A02946420 (WEST AFRICA)
CONTACT NUMBERS 07064507970,08053341115
EMAIL ADDRESS abelmcpedro1@gmail.com
NEAREST AIRPORT (60mins to residence) Benin AIRPORT, Benin City

PROFESSIONAL QUALIFICATIONS

HSE/IMCA SURFACE SUPPLY CLASS II A Cert No. 106/11-IIA

FIRST AID COMMERCIAL DIVER Cert No. 106/11-IIA
UNDERWATER WELDING Cert No.106/11-IIA
INTERNATIONAL WELDER (IIW) Cert.No NIS/ITW/111-1.1/QW00360

SAFETY TRAINING

STCW 95 Cert No. JINSR/STCW/1-4/0022717

HUET (OPITO) Cert No.3869519519518041807170
SURVIVAL AT SEA Cert No ONL/SELF/SAS/HUET/257

ACADEMIC QUALIFICATIONS

Degree B.Eng (Electrical Electronics Engineering)

SSCE WASSCE

SKILLS & EXPERIENCE SUMMARY

IMCA CLASS 2 COMMERCIAL DIVER
UNDERWATER WELDER (MANUAL METAL ARC
PIPE\TUBE WELDER (EN 287-1 111 T BW 1.2 B T12 D150 H-L045 ss nb)
ELECTRICAL METAINANCE,WIRING AND INSTALLATION
PROFICIENCY IN MICROSOFT OFFICE PACKAGES,COREL DRAW AND HARD/SOFT WARE INSTALLATION

Page 1 of 3
 Resume NAME:- PEDRO ABEL
HSE/IMCA CLASS II, UNDERWATER WELDER (MMA)

OFFSHORE EMPLOYMENT HISTORY

Company / Client / Dates / Project Type
Position
Vessel Location Duration Construction/Inspection
OMAK MARITIME EXXONMOBIL,MFEM A 07/03/13
LTD/ATLANTIS DIVER CONSTRUCTION
DWELLER

Job Description: OXY/ACH CUTTTING OF PLATE AND TUBE MEMBERS OF THE JACKET
OMAK MARITIME EXXONMOBIL,IDOHO/USARI 16/04/13
LTD/ATLANTIS DIVER INSPECTION
DWELLER

Job Description: RECOVERY OF AUT MACHINE FROM THE SEABED

OMAK MARITIME EXXONMOBIL,IDOHO/USARI 14/04/13
LTD/ATLANTIS DIVER INSPECTION
DWELLER

Job Description: BUFFING PIPELINE/WEIGHT COAT REMOVAL USING HYDRAULIC JACK HAMMER
OMAK MARITIME EXXONMOBIL,IDOHO/USARI 15/04/13
LTD/ATLANTIS DIVER INSPECTION
DWELLER

Job Description: A.U.T MACHINE INSTULLED ON PIPELINE FOR SCANING

OMAK MARITIME EXXONMOBIL,NNPC/MPN (G.O 18/04/13 INSPECTION
LTD/ATLANTIS
EAP) DIVER
DWELLER

Job Description: SUBSEA CLAMP CLEAN FOR INSPECTION

OMAK MARITIME EXXONMOBIL,NNPC/MPN 23/03/13
LTD/ATLANTIS
(UTUE P.P) DIVER INSPECTION
DWLLER

Job Description: VISUAL ANODE INSPECTION

OMAK MARITIME EXXONMOBIL 20 /05/13
LTD/ATLANTIS
NNPC/MPN(ETUE) DIVER INSPECTION
DWLLER

Job Description: HOSE CONFIGURATION OF THE SINGLE BOUY MOORING (SBM)

OMAK MARITIME EXXONMOBIL (IDOHO/Q.I.T) 25/03/13
LTD/ATLANTIS DIVER CONSTRUCTION
DWLLER

Job Description: TRANSPORTION OF PERSONNEL TO AND FRO THE VESSLE AND PLATFORMS
OMAK MARITIME EXXONMOBIL (EKPE) 28/02/13
LTD/ATLANTIS DIVER MAINTENANCE
DWLLER

Job Description: AIR LIFTING TO GAIN ACCESS TO BURIED PIPE ON THE SEABED
OMAK MARITIME EXXONMOBIL,NNPC/MPN 14/05/13
LTD/ATLANTIS
(UTUE P.P) DIVER INSPECTION
DWLLER

Job Description: CATHODE POTENTIAL (CP) READING ON THE RISER

ATLANTIC NIGERIA NATURAL 19/02/14

MARINE/DISN LIQUIEDFIED GAS (NNLG) DIVER SALVAGE
LOADING JETTY II
Job Description: INSTALLATION OF LIFT BAGS TO THE SINKED VESSLE TO HELP SALVAGE

ATLANTIC TOTAL E&P

MARINE/DISN / FSO UNITY 15/04/2014 DIVER
INSPECTION/INSTALLATION

Page 2 of 3
 Resume NAME:- PEDRO ABEL
HSE/IMCA CLASS II, UNDERWATER WELDER (MMA)

Job Description: Swim by inspecting the Tandem export hoses, removal of old and installation of new
winker light on it at FSO unity

INSHORE EMPLOYMENT HISTORY

Dates / Project Type
Company Client Position
Duration Construction/Inspection
OSHUMUGA NIG MARITIME ACADEMY OF 04/04/2015 UNDERWATER
EDUCATION/TRAINING
LTD NIGERIA (MAN) ORON 6 MONTH WELDER
Job Description: UNDERWATER WELDING AND OXY/ACH CUTTING
NIGERIA 2013-2015 UNDERWATER
PETROLEUM TECHNOLOGY
INSTITUTE OF 2 YEARS WELDING EDUCATION/TRAINING
DEVELOPMENT FUND (PTDF)
WELDING INSRUCTOR
Job Description: GIVING WELDING THEORY AND PRACTICAL TRAINING TO THE TRAINEES
DEPTARTMENT 02/12/2017
OF WELDING & PETROLEUM TRAINING 3 YEARS DIVING/SWIMMING
EDUCATION/TRAINING
OFFSHORE INSTITUTE (PTI) INSTRUCTOR
TECH
Job Description: GIVING DIVING AND SWIMMING THEORY AND PRACTICAL TRAINING TO THE STUDENTS

REFEREES
MR . IDI STANLEY
SENIOR TECHNOLOGIST : PETROLEUM TRAINING INSTITUTE (PTI)
DEPARTMENT OF WELDING AND OFFSHORE TECHNOLOGY
EMAIL : idi_su@pti.edu.ng
+2348130435356

ENGR ALEX CHUKWUWIKE

NESTOIL NIG LMT.
PROJECT MANAGER
EMAIL : a.chukwunwike@nestoilgroup.com
08.033.402.965

Page 3 of 3
CLIENT: MONI PULO NIG. LTD KOHASA ENGINEERING COMPANY LIMITED
TITLE: AGBANI FPF HULL COROSION CONTROL

2.0 ABS AND BV CERTIFIED WELDERS

JULY 2019. Page 4 of 4