Form 8952, Revised

(538 )
Printed in U. S. A.

LIST
OF

PARTS

FOR FAMILY SHOPS

AAACHINE No. 29-4

REG. U. 8. PAT. OFF. BY

THE SINGER MANUFACTURING COMPANY

From the library of: Superior Sewing Machine & Supply LLC
 INSTRUCTIONS FOR OILING

To ensure easy running and prevent unnecessary wear

of the parts which are in movable contact, the machine
requires oiling and when in continuous use, "TYPE B"
or "TYPE D" OIL, sold only by Singer Sewing Machine
Company, should be applied at least twice each day
to all oil holes marked "OIL", as instructed in Form
8166'

INDEX

Page
Accessories 10

Bobbin Winders 10

Machine No. 29-4 5

Numerical List of Parts 13

Obsolete Parts 11

Copyright, U. S. A., 1918, 1923 and 1938

by The Singor Manufacturing Co.
All Right* Roserved for all Countries

From the library of: Superior Sewing Machine & Supply LLC
 INSTRUCTIONS FOR ORDERING

In ordering from this list, use ONLY the part NUMBER in

the FIRST Column.
The number stamped on a Sewing Machine Part is in every
case the number of the single part only.
Every combination of parts sent out as such has its specific
number, which, although not stamped on the parts, must be used
when ordering the combination.
Each number always indicates the SAME PART in whatever
list it appears, or for whatever machine.
The letters after some of the numbers indicate the style of
finish only, as follows:
A-Hardened, Polished, Nickel Plated and Buffed.
A.A-Buffed and Chromium Plated.
A.B-Hardened, Polished, Buffed and Chromium Plated.
A.C-Brown Baking Enamel Finish.
A.D-Gray Baking Enamel Finish.
A.E-Hardened, Bright Rumbled and Nickel Plated.
A.F-Hardened, Bright Rumbled, Nickel Plated, Bright Rumbled and
Chromium Plated.
A.G-Alumilite, Plain.
A.H-Alumilite Dyed.
A.J-Polished, Nickel Plated and Chromium Plated.
A.K-Hardened, Polished, Nickel Plated and Chromium Plated.
A.L-Heat Treated' for Toughness.
B-Polished, Nickel Plated and Buffed.
C-Hardened only.
C.R-Hardened and Merlized.
D-Polished Only.
E-Soft, Not Polished.
F-Hardened and Polished.
F.J-Hardened, Polished and Nickel Plated.
G-Bright Rumbled and Nickel Plated.
H-Blued.
J-Nickel Plated Only.
K-Hardened and Nickel Plated.

L-Brass Plated.
M-Oxidized.
N-Japanned, Dull.
From the library of: Superior Sewing Machine & Supply LLC
 INSTRUCTIONS FOR ORDERING - Continued

P-Japanned, Bright.
P.P-Wrinkle Finish.
R-Merlized.

S-Cadmium Plated.
T-Copper Plated.
T.A-Hardened, Polished, Copper and Nickel Plated and Buffed.
T.B-Copper and Nickel Plated and Polished.
T.J-Copper and Nickel Plated Only.
T.K-Hardened, Copper and Nickel Plated.
T.L-Copper and Brass Plated.
T.M-Copper Plated and Oxidized.
U-Zinc Plated.

V-Silver Plated.

W-Polished and Nickel Plated.

X-Black Oxide, for Iron and Steel.
X.C-Mardened and Black Oxide, for Iron and Steel.
Y-Black Nickel Plated Only.
Z-Chromium Plated.
Z.A-Hardened, Polished, Nickel Plated, Buffed and Chromiurn Plated.
Z.B-Polished, Nickel Plated, Buffed and Chromium Plated.
Z.C-Mardened and Chromium Plated.
Z.D-Polished and Chromium Plated. ^
Z.G-Bright Rumbled, Nickel Plated, Bright Rumbled and Chromium
Plated.

Z.J-Nickel and Chromium Plated.

Z.T-Copper and Chromium Plated.
These letters MUST BE USED when they appear in the list;
and AFTER the number as in the list.
In this series;

I to 1500, 50001 to 51500 and 140001 to 142000 are

Screw Numbers.

1501 to 1600 and 51501 to 51800 are Nut Numbers.

1801 to 2000 and 51801 to 52000 are Roller Numbers.

2001 to 50000 and 52001 to 140000 and 142001 to 190000

are Sewing Machine Parts, 190001 and upward are numbers
of Electrical Parts.
The figures in the second column refer only to the plates,
illustrating the parts, and are NOT TO BE USED in ordering.
Parts marked with an asterisk (*) are furnished only when repairs
are made at factory.

From the library of: Superior Sewing Machine & Supply LLC
 LIST OP PARTS COMPLETE
FOR

A\ACHINE No. 29-4

For Shoe Repairing, Putting In Gores, etc. Needledescends
1/8 Inch from end of lower arm which is I inch deep and I Inch
across. Has upper feed only, which moves the woric in any
desired direction.

No. Plate Name

•8672 Arm of Machine with 15404 and two 15405
USE 7742 " " " Base Screw
4288 1044 " " " Side Cover (back)
51224W 7742 n n n n n t> Thumb
Screw
8673 1044 Arm of Machine Side Cover (front)
207D 1045 « « « « n n gpj.gy

From the library of: Superior Sewing Machine & Supply LLC
 PARTS FOR /MACHINE No. 29-4

No. Plate Name

8674 1042 Balance Wheel with two 4450
445C 7742 " " Set Screw
8659 1045 Check Lever
8554 1045 " " Joint Pin
8555 1045 " " Spring
219D 1045 " " " Screw
14026 1045 " " " Steady Pin
8559 1032 Feed Motion Bell Crank Lever
194E 7742 Joint Screw
8660 1043 " " Cam Wheel with 33523
2117 1048 " " " Pin
8562 1043 " " Ring Slide Bar with 1816...
1816 7742 " " B « " Qa,m Roller
and Stud
8556 1046 Feeding Foot
8558 1046 " " (narrow fork, coarse)
8557 1046 " " (narrow fork, fine)
193F 1045 " " Screw
8685 1043 Foot Bar
8569 1048 " " Hinge Pin
8564 1030 " " Revolving Joint
8694 1030 " " " " Bearing
8566 1030 Foot Bar Revolving Joint Bearing com
plete, NOS. 8564, 8571 and 8694
•8567 1030 Foot Bar Revolving Joint Guide Plate...
R * H n R n
8568 1030
Rivet
•8570 1030 Foot Bar Revolving Joint Slide Rod
33527 " " " n R R 8570
with 8567 and two 8568
8571 1030 Foot Bar Revolving Joint Washer
8565 1030 Foot Bar Revolving Joint complete, Nos.
8566 and 33527
33520 Foot Bar Revolving Joint 8565 with 8569
•8676 Head of Arm
•33524 " " " 8676 with 41D,66F,193F,288D,
8556,8559,8562,8573 to 8577,8615,
8616, 8620, 8624, 8671, 8685,33519,
33520,33525 and two each 152F,194E,
202F and 207F
128E 7742 Head of Arm Binding Screw
8573 1043 " Revolving Bush
8574 1045 " " " Friction Spring....
H R R H H Pin
8575 1045
R R H H R
207F 1045
8576 1043 " " " Handle
152F 7742 " " R R Screw
8577 1045 " " " Supporting Washer..
N (1 fl M (t
202F 1045
Screw

From the library of: Superior Sewing Machine & Supply LLC
 PARTS FOR MACHINE No. 29-4

No. Plate Name

128E 7742 Leg Screw
9331 1045 " " Washer
8671 1045 Lifter
66r 1045 " Bearing Screw
*8686 Lower Arm and Bed
8582 1048 " " » « Dowel Pin
8655 1043 Needle Bar
33514 1042 " " Cam and Pulley Wheel (two
speed) 2 7/8 In.and 4 7/8 In.dlara.,
with 1299C
3012 1048 Needle Bar Cam and Pulley Wheel Pin....
n H n 11 n * • Set
1299C 7742
Screw
8662 1042 Needle Bar Driving Lever with 1801 and
14026
1801 7742 Needle Bar Driving Lever cam Roller and
Stud
8586 1048 Needle Bar Driving Lever Joint Pin
8687 1045 " " Needle Regulating Clamp with
237F
193F 1045 Needle Bar Needle Regulating Clamp
Screw
8588 1032 Needle Bar Piston Joint
n " " " Pin
8589 1048
8656 1045 " " Thread Retaining Spring
R n n R R Screw
SS133D 7742
8590 1044 " * Threading wire
8693 Needle Bar complete, Nos.l93F,8655,865€^
8687 and 'two SS133D
33519 Needle Bar 8693 with 8588 and 8589
237F 1045 " Clamping Screw
8591 1032 " Plate
8592 1032 " " (broad end)
84J 7742 " " Bearing Screw
8593 1047 " " Catch Pin
8594 1032 " " " " Spring
202D 1045 " " " • " Screw....
8595 1047 n " " " " stud
8670 1044 Oil Cup with 8597 and 8695
8695 1047 " "Oil Pad (felt) Per 100
327D 7742 " " Screw
8597 1032 " " Spring
8688 1047 Pinion Cover Plate.-
393E 1047 " • * Screw
8689 1047 Rack
8690 1042 " Connecting Rod
8601 1048 Reel Pin
11241 1032 " " Washer (cloth) Per 100
33515 1042 Shaft

From the library of: Superior Sewing Machine & Supply LLC
 8 PARTS FOR MACHINE No. 29-4

NO, Plate Name

*33521 Shaft 33515 with 8660 and 33516
•33517 " Bushing (front)
6604 1047 Shuttle Bobbin
•6654 " Body
662E 1047 " Tension Regulating Screw
8611 1047 " " Spring
8603 1047 Shuttle complete, Nos. 662E, 8604,8611,
and 8654
8605 1047 Shuttle Carrier with 241D and 6610
33526 " " 8605 with 33513
33512 1047 " " Driving Pinion with two
238D
33513 1C47 Shuttle Carrier Driving Pinion with
13350
8607 1047 Shuttle Carrier Driving Pinion Bushing.
1335C 1047 " " " " Screw Pin
238D 1047 " " " " Set Screw
8692 1047 " " Following Pinion
8609 1047 " " " " Stud..
8610 1047 " " Spring
. 241D 1047 " " " Screw
33516 1044 " Driving Cam with 1299C
3012 1048 " " Pin
1808 . 7742 " n 1. Roller and Stud....
1299C 7742 " " "Set Screw
8613 1C44 " " Lever with 1308. and 8614
7D 7742 " " Bearing Screw
8614 1046 " " " Stud
2269 1048 " " ' "Pin
8615 1C45 Stitch Regulator
=616 1045 " " Gib
2880 1045 * " Thumb Screw
8617 1046 Tension Cup (release)
8613 1046 " Disc
3879 1032 " " Washer (cloth)
1560D 1C46 " Regulating Thumb Nut
3619 1046 Spring
66 9E 1046 " Stud
.33522 " 666x with 1560D
33525 Tension complete, Nos.8617, 8619, 8879,
33522 and two 8618
S62C 1046 Thread Eyelet (head of arm)
2C7F 1045 • " " Screw
8621 1043 Vibrating Presser Lifting Lever
410 7742 " screw..
8624 1046 " Regulating Lever
515R 1046 " Clamp
ing Screw
8568 1030 Vibrating Presser Regulating Lever
Clamping Screw Rivet

From the library of: Superior Sewing Machine & Supply LLC
 PARTS FOR MACHINE No. 29-4

No. Plate Name

41D 7742 Vibrating Presser Regulating Lever
Screw
8625 1046 Vibrating Presser Regulating Lever
Slide Block
•33518 Vibrating Presser Regulating Lever
Slide Block 9625 with 515R and 8626
8626 1046 Vibrating Presser Regulating Lever
Slide Block Washer
1879 1045 Vibrating Presser Roller
8623 1045 " " Pin
33523 " " « « 8623 with
1879
862? 1043 Vibrating Presser Spring (flat)
274J 7742 " " " Screw
1539J 1048 " Lock Nut
•15404 Trade Mark
15405 " " Rivet

SINGER Needles should be used

in SINGER Mochines.
These Needles and their Containers
are marked with the
Company's Trade-Mark "SIMANCO.**" I

Needles in Containers marked

"FOR SINGER MACHINES"
are NOT SINGER made needles. 2

From the library of: Superior Sewing Machine & Supply LLC
 10

ACCESSORIES

No. Plate Name

36569 1050 Oiler with 36571
36570 " 36569, filled with oil
36571 1050 • Spout, 1 3/4 in. long, with 36807
36807 1048 " " Washer (leather)
26026 1050 Screw Driver (large)..
26485 1050 " * (small)

BOBBIN WINDERS
BOBBIN WINDER

No. Plate Name

8684 1050 Eccentric
51224W 7742 • Thumb Screw
8683 1050 Frame
128D 7742 " Screw
2460 1050 Friction Ring (rubber)
2461 1050 Pulley
8651 1050 Spindle
8682 1050 Bobbin Winder complete, Nos. 2460,2461
8651, 8683, 8684 and 51224W.

BOBBIN WINDER
(SWINGIN© AUTOMATIC, RIGHT HAND)

No. Plate Name

27540 2211 Base
27302 2211 Frame
50356D 7742 • Hinge Screw
1620J 1048 " ' " Nut
27303 1048 • Spring
27541 2211 Pulley
27695 2211 Spindle
27306 2211 Spool Pin
27307 2211 • Stand
27308 2211 Spool Stand complete, Nos. 418E, 1562J,
2106, 10141, 11241, 27306,27307 and
two each 2455 and wood screws 1 in.
No. 10
11241 2211 Spool Washer (cloth) Per 100
27696 2211 Stop Latch

From the library of: Superior Sewing Machine & Supply LLC
 BOBBIN WINDER 11

Np. Plate Name

350 7742 Stop Latch Hinge Screw
2455 1046 Tension Disc
1562J 1046 " Regulating Thumb Nut
418E 1046 " Screw stud
10141 1046 " Spring
2106 1046 • Thread oulde
27697 2211 Bobbin Winder, Nos. 35D, 1620J, 27302,
27303, 27540, 27541, 27695, 27696,
503560 and two wood screws 1 In.No.
7
27698 Bobbin Winder (swinging automatic,right
hand) complete, Nos.27308 and 27697

OBSOLETE PARTS

No. Plate Name

2860 7742 Arm of Machine Side Cover (back) Thumb
Screw
2860 7742 Bobbin Winder Eccentric Thumb Screw for
8682
8661 1042 Needle Bar Cam and Pulley Wheel (two
speed) 2 7/8 In. and 4 7/3 In.dlara.,
with 3610 for 8678
3610 1048 Needle Bar Cam and Pulley Wheel Set
Screw
590B 1045 Needle Bar Thread Retaining Spring
Screw for 8693
8678 1042 Shaft
•4449 " Bushing (front)
8691 1047 Shuttle Carrier Driving Pinion with
627C
627C 1047 Shuttle Carrier Driving Pinion Screw
Pin
8664 1044 Shuttle Driving Cam with 3610
3610 1048 " • * gg^ Screw

From the library of: Superior Sewing Machine & Supply LLC
 SINGER Needles should be used
in SINGER Machines.
These Needles and their Containers
are marked with the
Company's Trade-Mark "SIMANCO.**" 1

Needles in Containers marked

"FOR SINGER MACHINES"
are NOT SINGER made needles.

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL

LIST

OF PARTS

From the library of: Superior Sewing Machine & Supply LLC
 13

NUMERICAL LIST OF PARTS

No. Plate Name

7D 7742 Shuttle Driving Lever Bearing
Screw
35D 7742 Bobbin winder Stop Latch Hinge
Screw for 27697
41D 7742 Vibrating Presser Lifting Lever
Screw
41D 7742 Vibrating Presser Regulating
Lever Screw for 33524
66F 1045 Lifter Bearing Screw for 33524...
84J 7742 Needle Plate Bearing Screw
118E 7742 Arm of Machine Base Screw
128D 7742 Bobbin Winder Frame Screw for
8682
128E 7742 Head of Anr Binding Screw
128E 7742 Leg Screw
SS133D 7742 Needle Bar Thread Retaining
Spring Screw for 8693
152F 7742 Head Revolving Bush Handle Screw
for 33524
193F ^ 1045 Feeding Foot Screw for 33524.....
193F • 1045 Needle Bar Needle Regulating
Clamp Screw for 8693
194E 7742 Feed Motion Bell Crank Lever
Joint Screw for 33524
202F 1045 Head Revolving Bush Supporting
Washer Screw for 33524
202D 1045 Needle Plate Catch Pin Spring
Screw
207D 1045 Arm of Machine Side Cover (front)
Screw
207F 1045 Head Revolving Bush Friction
Spring screw for 33524
207F 1045 Thread Eyelet Screw for 33524
219D 1045 Check Lever Spring Screw
237F 1045 Needle Clamping Screw for 8687...
238D 1047 Shuttle Carrier Driving Pinion
Set Screw for 33512
241D 1047 Shuttle Carrier Spring Screw for
3605
274J 7742 Vibrating Presser Spring Screw...
286D 7742 Ann of Machine Side Cover (back)
Thumb Screw, obsolete
2860 7742 Bobbin Winder Eccentric Thumb
Screw for 8682, obsolete

From the library of: Superior Sewing Machine & Supply LLC
 14 NUMERICAL LIST OF PARTS

No. Plate Name

288D 1045 Stitch Regulator Thumb Screw for
33524
327D 7742 Oil Cup Screw
361D 1048 Needle Bar Cam and Pulley Wheel
Set Screw for 8661, obsolete.
361D 1048 Shuttle Driving Cam Set Screw for
8664, obsolete
393E 1047 Pinion Cover Plate Screw..
418E 1046 Bobbin Winder Tension Screw Stud
for 27308
445C 7742 Balance Wheel Set Screw for 8674.
515R 1046 Vibrating Presser Regulating
Lever Clamping Screw for
33518...;
590B 1045 Needle Bar Thread Retaining
Spring Screw for 8693, obso
lete
627C 1047 Shuttle Carrier Driving Pinion
Screw Pin for 8691, obsolete.
662E 1047 Shuttle Tension Regulating Screw
for 8603
668E 1046 Tension Stud for 33522
1299C 7742 Needle Bar Cam and Pulley Wheel
Pin Set Screw for 33514
1299C 7742 Shuttle Driving Cam Set Screw for
33516
1335C 1047 Shuttle Carrier Driving Pinion
Screw Pin for 33513
1539J 1048 Vibrating Presser Spring Screw
Lock Nut
1560D 1046 Tension Regulating Thumb Nut for
33522
1562J 1046 Bobbin Winder Tension Regulating
Thumb Nut for 27308
1620J 1048 Bobbin Winder Frame Hinge Screw
Nut for 27697
1801 7742 Needle Bar Driving Lever Cam
Roller and Stud for 8662
1808 7742 Shuttle Driving Cam Roller and
Stud for 8613
1816 7742 Feed Motion Ring Slide Bar Cam
Roller and Stud for 8562
1879 1045 Vibrating Presser Roller for
33523
2106 1046 Bobbin Winder Tension Thread
Oulde for 27308
2117 1046 Feed Motion Cam WheeL Pin
2269 1048 Shuttle Driving Lever Stud Pin...
2455 1046 Bobbin Winder Tension Disc for
27308

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL LIST OF PARTS 15

No. Plate Name

2460 1050 Bobbin Winder Friction Ring (rub
ber) for 8682
2461 1050 Bobbin Winder Pulley for 8682....
3012 1048 Needle Bar Cam and Pulley Wheel
Pin
3012 1048 Shuttle Driving Cam Pin
4268 1044 Arm of Machine Side Cover (back).
•4449 Shaft Bushing (front) obsolete...
8554 1045 Check Lever Joint Pin
8555 1045 " " spring
8556 1046 Feeding Foot for 33524
8557 1046 " " (narrow fork, fine).
8558 1046 " " (narrow fork,coarse)
8559 1032 Feed Motion Bell Crank Lever for
33524
8562 1043 Feed Motion Ring Slide Bar with
1816, for 33524
8564 1030 Foot Bar Revolving Joint for 8566
8565 1030 Foot Bar Revolving Joint complete
for 33520, Nos.8566 and 33527
8566 1030 Foot Bar Revolving Joint Bearing
complete for 8565, Nos. 8564,
8571 and 8694
•8567 1030 Foot Bar Revolving Joint Guide
Plate for 33527
8568 1030 Foot Bar Revolving Joint Guide
Plate Rivet for 33527
8568 1030 Vibrating Presser Regulating
Lever Clamping Screw Rivet
for 33527
8569 • 1048 Foot Bar Hinge Pin for 33520
•8570 1030 " " Revolving Joint Slide Rod
for 33527
8571 1030 Foot Bar Revolving Joint Washer
for 8566
8573 1043 Head Revolving Bush for 33524....
8574 1045 " " w Friction Spring
for 33524
8575 1045 Head Revolving Bush Friction
Spring Pin for 33524
8576 1043 Head Revolving Bush Handle for
33524
8577 1045 Head Revolving Bush Supporting
Washer for 33524
8582 1048 Lower Arm and Bed Dowel Pin
8586 1048 Needle Bar Driving Lever Joint
Pin
8588 1032 Needle Bar Piston Joint for 33519
8589 1048 " " " " Pin for
33519

From the library of: Superior Sewing Machine & Supply LLC
 16 NUMERICAL LIST OF PARTS

No. Plate Name

8590 1044 Needle Bar Threading Wire
8591 1032 " Plate
8592 1032 " " (broad end)
8593 1047 " " Catch Pin
8594 1032 t, « « « Spring
8595 1047 " I. I. « II gtud
8597 1032 Oil Cup Spring for 8670
8601 1048 Reel Pin
8603 1047 Shuttle complete, Nos. 662E,8604,
8611 and 8654
8604 1047 Shuttle Bobbin for 8603
8605 1047 " Carrier with 241D and
8610 for 33526
8607 1047 Shuttle Carrier Driving Pinion
Bushing
8609 1047 Shuttle Carrier Following Pinion
Stud
8610 1047 Shuttle Carrier Spring for 8605..
8611 1047 " Tension Spring for 8603..
8613 1044 " Driving Lever with 1808
and 8614
8614 1048 Shuttle Driving Lever Stud for
8613
8615 1045 Stitch Regulator for 33524
8616 1045 " " 01b for 33524...
8617 1046 Tension Cup (release) for 33525..
8618 1046 " Disc for 33525
8619 1046 " Spring for 33525
8620 1046 Thread Eyelet (head of arm) for
33524
8621 1043 Vibrating Presser Lifting Lever..
8623 1045 " " Roller Pin for
33523
8624 1046 Vibrating Presser Regulating
Lever for 33524
8625 1046 Vibrating Presser Regulating
Lever Slide Block for 33518..
8626 1046 Vibrating Presser Regulating
Lever Slide Block Washer for
33518
3627 1043 Vibrating Presser Spring (flat)..
8651 1050 Bobbin Winder Spindle for 8682...
»8654 Shuttle Body for 8603
8655 1043 Needle Bar for 8693
8656 1045 " " Thread Retaining Spring
for 8693
8659 1045 Check Lever
8660 1043 Feed Motion Cam Wheel with 33523
for 33521

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL LIST OF PARTS 17

No. Plate Name

8661 1042 Needle Bar Cam and Pulley Wheel
(two speed) 2 7/8 In. and
4 7/8 In.dlara., with 361D,for
8678, obsolete
8662 1042 Needle Bar Driving Lever with
1801 and 14026
8664 1044 Shuttle Driving Cam with 361D,ob
solete
8670 1044 Oil cup with 8597 and 8695
8671 1045 Lifter for 33524
♦8672 Arm of Machine with 15404 and two
15405
8673 1044 Arm of Machine Side Cover (front)
8674 1042 Balance Wheel with two 445C
♦8676 Head of Arm for 33524
8678 1042 Shaft, obsolete
8682 1050 Bobbin Winder complete, Nos.2460,
2461, 8651, 8683, 8684 and
51224W
8683 1050 Bobbin Winder Frame for 8682
8684 1050 " " Eccentric for 8682.
8685 1043 Foot Bar for 33524
♦8686 Lower Arm and Bed
8687 1045 Needle Bar Needle Regulating
Clamp with 237F, for 8693....
8688 1047 Pinion Cover Plate
8689 1047 Rack
8690 1042 " Connecting Rod
8691 1047 Shuttle Carrier Driving Pinion
with 627C, obsolete
8692 1047 Shuttle Carrier Following Pinion.
8693 Needle Bar complete for 33519,Nos.
193F,8655,8656,8687 and two
SS133D
8694 1030 Foot Bar Revolving Joint Bearing
for 8566
8695 1047 Oil Cup Oil Pad (felt) for 8670
Per 100
8879 1032 ^ Tension Disc Washer (cloth) for
33525
9331 1045 Leg Screw Washer
10141 1046 Bobbin Winder Tension Spring for
27308
11241 2211 Bobbin Winder Spool Washer (cloth)
for 27308 Per 100
11241 1032 Reel Pin Washer (cloth)...Per 100
14026 1045 Check Lever Spring Steady Pin for
8662
•15404 Trade Mark for 6672

From the library of: Superior Sewing Machine & Supply LLC
 18 NUMERICAL LIST OF PARTS

No. Plate Name

15405 Trade Mark Rivet for 8672
26026 1050 Screw Driver, large (Accessories)
26485 1050 " " small (Accessories)
27302 2211 Bobbin Winder Frame for 27697....
27303 1048 " " " Spring for
27697
27306 2211 Bobbin Winder Spool Pin for 27308
27307 2211 " • " Stand for 27308
27308 2211 Bobbin Winder Spool Stand com
plete for 27698, NOS. 416E,
1562J,2106,10141,11241,27306,
27307 and two each 2455 and
wood screws 1 in. No. 10
27540 2211 Bobbin Winder Base for 27697..^..
27541 2211 " " Pulley for 27697...
27695 2211 " • Spindle for 27697..
27696 2211 " " Stop Latch for 27697
27697 2211 Bobbin Winder for 27698, Nos.35D,
1620J,27302,27303,27540,27541,
27695, 27696,50356D and two
wood screws 1 in. No. 7
27698 Bobbin Winder (swinging automatic,
ri^t hand)complete,No8.27308
and 27697
33512 1047 Shuttle Carrier Driving Pinion
with two 238D
33513 1047 Shuttle Carrier Driving Pinion
with 1335C for 33526
33514 1042 Needle Bar Cam and Pulley Wheel
(two speed)2 7/8 in.and 4 7/8
in.diam., with 129gc
33515 1042 Shaft for 33521
33516 1044 Shuttle Driving Cam with 1299C
for 33521
•33517 Shuttle Bushing (front)
•33518 Vibrating Prosser Regulating
Lever Slide Block 8625 with
515R and 8626
33519 Needle Bar 8693 with 8588 and
8589, for 33524....
33520 Foot Bar Revolving Joint 8565
With 8569, for 33524
33521 Shaft 33515 with 8660 and 33516..
33522 Tension Stud 668E with 1560D, for
33525
33523 Vibrating Presser Roller Pin 8623
with 1879, for 8660

From the library of: Superior Sewing Machine & Supply LLC
 NUMERICAL LIST OF PARTS 19

No. Plate Name

•33524 Head of Arm 8676 with 41D, 66F,
193F, 288D, 8556, 8559, 8562,
85';3 to 8577,8615,8616,8620,
8624,8671,8685,33519,33520,
33525 and two each 152F,194E,
202F and 207F
33525 — Tension complete for 33524, Nos.
8617,8619,8879,33522 and two
8618
33526 Shuttle Carrier 8605 with 33513..
33527 — Foot Bar Revolving Joint Slide
Rod 8570 with 8567 and two
8568, for 8565
36569 1050 Oiler with 36571, for 36570
36570 " 36569, filled with oil (Ac
cessories)
36571 1050 Oiler Spout, 1 3/4 In. long, with
36807, for 36569
36807 1048 Oiler Spout Washer (leather) for
36571
50356D 7742 Bobbin Winder Frame Hinge Screw
for 27697
51224W 7742 Arm of Machine Side Cover (back)
Thinnb Screw
51224W 7742 Bobbin Winder Eccentric Thumb
Screw for 8682

SINGER Needles should be used

In SINGER Machines.
These Needles and their Containers
are marked with the
Company's Trade-Mark "SIMANCO.**" 1

Needles in Containers marked

"FOR SINGER MACHINES"
are NOT SINGER made needles. 2

From the library of: Superior Sewing Machine & Supply LLC
 SINGER Needles should be used
in SINGER Machines.
These Needles and their Containers
are marked with the
Company's Trade-Mark "SIMANCO.**" I

Needles in Containers marked

"FOR SINGER MACHINES"
are NOT SINGER made needles. 2

From the library of: Superior Sewing Machine & Supply LLC
'S
'8

ILLUSTRATIONS

OF

PARTS

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 1030 - FULL SIZE

0567

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 1032 - FULL SIZE

8879

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 1042 - ONE-FOURTH SIZE

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 1043 - ONE-HALF SIZE

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 1044 - ONE-HALF SIZE

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 1045 - FULL SIZE
855U

1I4.026 219

8687 195

¥
^0 ^ 8615

207 ,8616 8575

202 1879 8623

9331 25027

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 1046 - FULL SIZE

fll"

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 1047 - FULL SIZE

8603 Q60U 8611 662

i 8692

8605 6610 21+1 33513 1335

1
33512 238 8607 8609

8688

o n o

8691 627 393 8593 8595

8695
8689

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 1048 - FULL SIZE
636 361

^ •

1620

1510 1559 132k 1526

8601 8586 3012 8582 2117

n

2269 85^ 8589 86llt

o

0
36807 27505

O
From the library of: Superior Sewing Machine & Supply LLC
 PLATE 1050 - ONE-HALF SIZE

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 2211 - ONE-HALF SIZE

From the library of: Superior Sewing Machine & Supply LLC
 PLATE 7742 - FULL SIZE
118 122 128 152 194

51224

50356 35

I8I6 1808

SSI33

From the library of: Superior Sewing Machine & Supply LLC
From the library of: Superior Sewing Machine & Supply LLC
From the library of: Superior Sewing Machine & Supply LLC