ATAC Solutions

01622 882400 /
info@atacsolutions.com

Series description: Wilo-Star-STG

H/m Wilo-Star-STG

15
10

/11
15
/9
8
1
(255
6 )/6 25(30
,5 )/7
25(
4 15(25 30 )/8
)/4
15(
2 25)
/6

0
0 1 2 3 4 5 Q/m³/h

Design Equipment/function
Glandless circulation pump with threaded connection. Preselectable speed Operating modes
stages for power adjustment • Speed-stage switching
Manual functions
Application • Setting of the speed stages: 3 speed stages
Primary circuits of solar and geothermal systems Equipment
• Wrench attachment point on pump body (only for nominal diameter
Type key DN 25)
Example: Star STG 25/6 • Cable lead-in possible on both sides
• Quick connection with spring clips
Standard pump for solar and geothermal energy
Star-STG • Blocking current-proof motor
systems
25/ Nominal diameter Rp 1 Materials
• Pump housing: Grey cast iron
6 Max. delivery head in m
• Impeller: Polypropylene
• Shaft: stainless steel
Special features/product advantages • Bearing: Carbon, metal impregnated
• Special hydraulics for use in solar and geothermal energy systems
• Pump housing with wrench attachment point Scope of delivery
• Pump housing with cataphoretic coating for the prevention of • Pump
corrosion by condensation formation • Seal
• Installation and operating instructions
Technical data
• Permissible temperature range -10 °C to +110 °C, in short-term Accessories
operation (2 h) +120 °C (Wilo-Star-STG 25(30)/7 and Wilo-Star- • Screwed connections
STG 25(30)/8 +10 °C to +110 °C) • Adapter fittings
• Mains connection 1~230 V, 50 Hz • Thermal insulation shells
• Protection class IP X4D
• Threaded connection Rp ½, Rp 1 and Rp 1¼
• Max. operating pressure 10 bar

Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 1 / 25

 ATAC Solutions

01622 882400 /
info@atacsolutions.com

Data sheet: Wilo-Star-STG 15/4

Pump curves Approved fluids (other fluids on request)

v
0 1 2 3 4 5 Rp½ Heating water (in accordance with VDI
m/s •
0 0,4 0,8 1,2 1,6 Rp1 2035)
H/m Wilo-Star-STG
15/4, 25/4 Water-glycol mixtures (max. 1:1; above
1~230 V - Rp ½ / Rp 1
4 20% admixture, the pumping data •
must be checked)
3
ma
x. Permitted field of application
2 Temperature range at max. ambient •
mi
temperature +40 °C -10 to +110 °C (in short-term
n.
1 operation 2 h: +120 °C)

Maximum permissible
0 Pmax 10 bar
0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 Q/m³/h operating pressure
0 0,2 0,4 0,6 0,8 1,0 Q/l/s

0 2 4 6 8 10 12 Q/Igpm Pipe connections

P1/W
max. Threaded pipe union Rp ½
40
min. Thread G1
20
Overall length L0 130 mm
0
0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 Q/m³/h
Motor/electronics
Electromagnetic compatibility EN 61800-3
Dimension drawing
100 Emitted interference EN 61000-6-3
54
Interference resistance EN 61000-6-2
PG 11
Protection class IP 44
58

Insulation class F
130

Mains connection 1~230 V, 50 Hz

90

Speed 1440 - 2350 / 1910 - 2630 /

78 n
2140 - 2720 rpm

G1 33 96 Power consumption P1 28 / 38 / 48 W
(Rp ½)
92,5 Current consumption I 0.13 / 0.17 / 0.21 A

Motor protection Not required (blocking-current

Terminal diagram proof)

Threaded cable connection PG 1x11

Materials
Pump housing Grey cast iron (EN-GJL-200)

Impeller Polypropylene

Pump shaft Stainless steel (X40Cr13)

L N PE
Blocking current-proof motor Bearing Carbon, metal impregnated
Single-phase motor (EM) 2pole 1~230 V, 50 Hz
With built-in capacitor Minimum suction head at suction port for avoiding
cavitation at water pumping temperature
Minimum suction head at 50 / 95 / 110
0.5 / 3 / 10 m
°C

Information for order placements

Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 2 / 25

ATAC Solutions

01622 882400 /
info@atacsolutions.com

Data sheet: Wilo-Star-STG 15/4

Make Wilo

Type Star-STG 15/4

Art no. 4056933

Weight approx. m 2.220 kg

Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 3 / 25

 ATAC Solutions

01622 882400 /
info@atacsolutions.com

Data sheet: Wilo-Star-STG 15/6

Pump curves Approved fluids (other fluids on request)

v
0 1 2 3 4 5 6 Rp½ Heating water (in accordance with VDI
m/s •
0 0,5 1,0 1,5 2,0 Rp1 2035)
H/m Wilo-Star-STG
15/6, 25/6 Water-glycol mixtures (max. 1:1; above
6 1~230 V - Rp ½ / Rp 1
20% admixture, the pumping data •
5 must be checked)

4 ma
x. Permitted field of application
3
Temperature range at max. ambient •
2 temperature +40 °C -10 to +110 °C (in short-term
m
in
. operation 2 h: +120 °C)
1
Maximum permissible
0 Pmax 10 bar
0 1 2 3 4 Q/m³/h operating pressure
0 0,2 0,4 0,6 0,8 1,0 1,2 Q/l/s

0 4 8 12 Q/Igpm Pipe connections

P1/W max.
Threaded pipe union Rp ½
min.
40 Thread G1

Overall length L0 130 mm

0
0 1 2 3 4 Q/m³/h
Motor/electronics
Electromagnetic compatibility EN 61800-3
Dimension drawing
100 Emitted interference EN 61000-6-3
54
Interference resistance EN 61000-6-2
PG 11
Protection class IP 44
54

Insulation class F
130

Mains connection 1~230 V, 50 Hz

90

Speed 1250 - 2350 / 1700 - 2650 /

78 n
2150 - 2750 rpm

G1 33 97 Power consumption P1 41 / 54 / 63 W
(Rp ½)
92,5 Current consumption I 0.18 / 0.23 / 0.28 A

Motor protection Not required (blocking-current

Terminal diagram proof)

Threaded cable connection PG 1x11

Materials
Pump housing Grey cast iron (EN-GJL-200)

Impeller Polypropylene

Pump shaft Stainless steel (X40Cr13)

L N PE
Blocking current-proof motor Bearing Carbon, metal impregnated
Single-phase motor (EM) 2pole 1~230 V, 50 Hz
With built-in capacitor Minimum suction head at suction port for avoiding
cavitation at water pumping temperature
Minimum suction head at 50 / 95 / 110
0.5 / 3 / 10 m
°C

Information for order placements

Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 4 / 25

ATAC Solutions

01622 882400 /
info@atacsolutions.com

Data sheet: Wilo-Star-STG 15/6

Make Wilo

Type Star-STG 15/6

Art no. 4056946

Weight approx. m 2.40 kg

Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 5 / 25

 ATAC Solutions

01622 882400 /
info@atacsolutions.com

Data sheet: Wilo-Star-STG 15/6.5

Pump curves Approved fluids (other fluids on request)

0 1 2 3 4 5 Rp½
m/s
0 0,4 0,8 1,2 1,6 2,0 Rp1 Heating water (in accordance with VDI
•
H/m
Wilo-Star-STG 2035)
7 15/6,5, 25/6,5
1~230 V - Rp ½ / Rp 1 Water-glycol mixtures (max. 1:1; above
6 20% admixture, the pumping data •
5 must be checked)

4 Permitted field of application

ma
3 x.
Temperature range at max. ambient •
2 temperature +40 °C -10 to +110 °C (in short-term
operation 2 h: +120 °C)
1 min
.
0 Maximum permissible
0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 Q/m³/h Pmax 10 bar
operating pressure
0 0,2 0,4 0,6 0,8 1,0 Q/l/s
Pipe connections
0 2 4 6 8 10 12 Q/Igpm
P1/W Threaded pipe union Rp ½

80 max. Thread G1

40 min. Overall length L0 130 mm

0
0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 Q/m³/h Motor/electronics
Electromagnetic compatibility EN 61800-3

Dimension drawing Emitted interference EN 61000-6-3

100
54 Interference resistance EN 61000-6-2

PG 11 Protection class IP 44
54

Insulation class F

Mains connection 1~230 V, 50 Hz

130

Speed 1178 - 2170 / 1714 - 2604 /

n
90

78
2303 - 2707 rpm

Power consumption P1 35 / 52 / 70 W
G1 33 96
(Rp ½) Current consumption I 0.16 / 0.24 / 0.30 A
92,5
Motor protection Not required (blocking-current
proof)
Terminal diagram
Threaded cable connection PG 1x11

Materials
Pump housing Grey cast iron (EN-GJL-200)

Impeller Polypropylene

Pump shaft Stainless steel (X40Cr13)

L N PE Bearing Carbon, metal impregnated
Blocking current-proof motor
Single-phase motor (EM) 2pole 1~230 V, 50 Hz Minimum suction head at suction port for avoiding
With built-in capacitor
cavitation at water pumping temperature
Minimum suction head at 50 / 95 / 110
0.5 / 3 / 10 m
°C

Information for order placements

Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 6 / 25

ATAC Solutions

01622 882400 /
info@atacsolutions.com

Data sheet: Wilo-Star-STG 15/6.5

Make Wilo

Type Star-STG 15/6.5

Art no. 4056952

Weight approx. m 2.840 kg

Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 7 / 25

 ATAC Solutions

01622 882400 /
info@atacsolutions.com

Data sheet: Wilo-Star-STG 15/9

Pump curves Approved fluids (other fluids on request)

v
0 0,5 1 1,5 m/s
Heating water (in accordance with VDI
H/m •
Wilo-Star STG 15/9 2035)
1~230 V - Rp ½
10 Water-glycol mixtures (max. 1:1; above
20% admixture, the pumping data •
8 must be checked)

Permitted field of application

6 m
ax
.
Temperature range at max. ambient •
4 temperature +40 °C -10 to +110 °C (in short-term
operation 2 h: +120 °C)
m
2 in
Maximum permissible
Pmax 10 bar
operating pressure
0
0 0,5 1 1,5 2 2,5 Q/m³/h
0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 Q/l/s Pipe connections
0 0,2 0,4 0,6 0,8 Q/Igpm

P1/W
Threaded pipe union Rp ½
120
max.
Thread G1
100

80
Overall length L0 180 mm
60 min
Motor/electronics
40

20 Electromagnetic compatibility EN 61800-3

0 0,5 1 1,5 2 2,5 Q/m³/h

Emitted interference EN 61000-6-3

Dimension drawing Interference resistance EN 61000-6-2

53,7 G1
Protection class IP 44
3

Insulation class F
90

78,8

Mains connection 1~230 V, 50 Hz

180

Speed 811 - 1564 / 1154 - 2122 /

n
90

1687 - 2535 rpm

G1
78
Power consumption P1 50 / 78 / 110 W
67,2 22,5 105
130,4 Current consumption I 0.23 / 0.34 / 0.50 A

Motor protection Not required (blocking-current

Terminal diagram proof)

Threaded cable connection PG 1x11

Materials
Pump housing Grey cast iron (EN-GJL-200)

Impeller Polypropylene

Pump shaft Stainless steel (X40Cr13)

L N PE
Bearing Carbon, metal impregnated
Blocking current-proof motor
Single-phase motor (EM) 2pole 1~230 V, 50 Hz
With built-in capacitor
Minimum suction head at suction port for avoiding
cavitation at water pumping temperature
Minimum suction head at 50 / 95 / 110
0.5 / 3 / 10 m
°C

Information for order placements

Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 8 / 25

ATAC Solutions

01622 882400 /
info@atacsolutions.com

Data sheet: Wilo-Star-STG 15/9

Make Wilo

Type Star-STG 15/9

Art no. 4061441

Weight approx. m 3.50 kg

Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 9 / 25

 ATAC Solutions

01622 882400 /
info@atacsolutions.com

Data sheet: Wilo-Star-STG 15/11

Pump curves Approved fluids (other fluids on request)

v
0 0,5 1 1,5 m/s
Heating water (in accordance with VDI
H/m •
Wilo-Star STG 15/11 2035)
1~230 V - Rp ½
10 Water-glycol mixtures (max. 1:1; above
20% admixture, the pumping data •
8 must be checked)
m
ax
. Permitted field of application
6

Temperature range at max. ambient •

4 temperature +40 °C -10 to +110 °C (in short-term
operation 2 h: +120 °C)
m
2 in.
Maximum permissible
Pmax 10 bar
operating pressure
0
0 0,5 1 1,5 2 2,5 Q/m³/h
0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 Q/l/s Pipe connections
0 0,2 0,4 0,6 0,8 Q/Igpm

P1/W
Threaded pipe union Rp ½
160
max. Thread G1
140

120
Overall length L0 180 mm
100
Motor/electronics
80 min.

60 Electromagnetic compatibility EN 61800-3

0 0,5 1 1,5 2 2,5 Q/m³/h

Emitted interference EN 61000-6-3

Dimension drawing Interference resistance EN 61000-6-2

53,7 G1
Protection class IP 44
3

Insulation class F
90

78,8

Mains connection 1~230 V, 50 Hz

180

Speed 716 - 1448 / 1064 - 1999 /

n
90

1486 - 2481 rpm

G1
91
Power consumption P1 75 / 115 / 165 W
67,2 22,5 118
130,4 Current consumption I 0.32 / 0.52 / 0.72 A

Motor protection Not required (blocking-current

Terminal diagram proof)

Threaded cable connection PG 1x11

Materials
Pump housing Grey cast iron (EN-GJL-200)

Impeller Polypropylene

Pump shaft Stainless steel (X40Cr13)

L N PE
Bearing Carbon, metal impregnated
Blocking current-proof motor
Single-phase motor (EM) 2pole 1~230 V, 50 Hz
With built-in capacitor
Minimum suction head at suction port for avoiding
cavitation at water pumping temperature
Minimum suction head at 50 / 95 / 110
0.5 / 3 / 10 m
°C

Information for order placements

Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 10 / 25

ATAC Solutions

01622 882400 /
info@atacsolutions.com

Data sheet: Wilo-Star-STG 15/11

Make Wilo

Type Star-STG 15/11

Art no. 4061442

Weight approx. m 3.920 kg

Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 11 / 25

 ATAC Solutions

01622 882400 /
info@atacsolutions.com

Data sheet: Wilo-Star-STG 25/4

Pump curves Approved fluids (other fluids on request)

v
0 1 2 3 4 5 Rp½ Heating water (in accordance with VDI
m/s •
0 0,4 0,8 1,2 1,6 Rp1 2035)
H/m Wilo-Star-STG
15/4, 25/4 Water-glycol mixtures (max. 1:1; above
1~230 V - Rp ½ / Rp 1
4 20% admixture, the pumping data •
must be checked)
3
ma
x. Permitted field of application
2 Temperature range at max. ambient •
mi
temperature +40 °C -10 to +110 °C (in short-term
n.
1 operation 2 h: +120 °C)

Maximum permissible
0 Pmax 10 bar
0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 Q/m³/h operating pressure
0 0,2 0,4 0,6 0,8 1,0 Q/l/s

0 2 4 6 8 10 12 Q/Igpm Pipe connections

P1/W
max. Threaded pipe union Rp 1
40
min. Thread G 1½
20
Overall length L0 180 mm
0
0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 Q/m³/h
Motor/electronics
Electromagnetic compatibility EN 61800-3
Dimension drawing
100 Emitted interference EN 61000-6-3
54
Interference resistance EN 61000-6-2
PG 11
Protection class IP 44
58

Insulation class F
180

Mains connection 1~230 V, 50 Hz

90

Speed 1440 - 2350 / 1910 - 2630 /

78 n
2140 - 2720 rpm

G 1½ 33 96 Power consumption P1 28 / 38 / 48 W
(Rp 1)
92,5 Current consumption I 0.13 / 0.17 / 0.21 A

Motor protection Not required (blocking-current

Terminal diagram proof)

Threaded cable connection PG 1x11

Materials
Pump housing Grey cast iron (EN-GJL-200)

Impeller Polypropylene

Pump shaft Stainless steel (X40Cr13)

L N PE
Blocking current-proof motor Bearing Carbon, metal impregnated
Single-phase motor (EM) 2pole 1~230 V, 50 Hz
With built-in capacitor Minimum suction head at suction port for avoiding
cavitation at water pumping temperature
Minimum suction head at 50 / 95 / 110
0.5 / 3 / 10 m
°C

Information for order placements

Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 12 / 25

ATAC Solutions

01622 882400 /
info@atacsolutions.com

Data sheet: Wilo-Star-STG 25/4

Make Wilo

Type Star-STG 25/4

Art no. 4050265

Weight approx. m 2.520 kg

Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 13 / 25

 ATAC Solutions

01622 882400 /
info@atacsolutions.com

Data sheet: Wilo-Star-STG 25/6

Pump curves Approved fluids (other fluids on request)

v
0 1 2 3 4 5 6 Rp½ Heating water (in accordance with VDI
m/s •
0 0,5 1,0 1,5 2,0 Rp1 2035)
H/m Wilo-Star-STG
15/6, 25/6 Water-glycol mixtures (max. 1:1; above
6 1~230 V - Rp ½ / Rp 1
20% admixture, the pumping data •
5 must be checked)

4 ma
x. Permitted field of application
3
Temperature range at max. ambient •
2 temperature +40 °C -10 to +110 °C (in short-term
m
in
. operation 2 h: +120 °C)
1
Maximum permissible
0 Pmax 10 bar
0 1 2 3 4 Q/m³/h operating pressure
0 0,2 0,4 0,6 0,8 1,0 1,2 Q/l/s

0 4 8 12 Q/Igpm Pipe connections

P1/W max.
Threaded pipe union Rp 1
min.
40 Thread G 1½

Overall length L0 180 mm

0
0 1 2 3 4 Q/m³/h
Motor/electronics
Electromagnetic compatibility EN 61800-3
Dimension drawing
100 Emitted interference EN 61000-6-3
54
Interference resistance EN 61000-6-2
PG 11
Protection class IP 44
58

Insulation class F
180

Mains connection 1~230 V, 50 Hz

90

Speed 1250 - 2350 / 1700 - 2650 /

78 n
2150 - 2750 rpm

G 1½ 33 96 Power consumption P1 41 / 54 / 63 W
(Rp 1)
92,5 Current consumption I 0.18 / 0.23 / 0.28 A

Motor protection Not required (blocking-current

Terminal diagram proof)

Threaded cable connection PG 1x11

Materials
Pump housing Grey cast iron (EN-GJL-200)

Impeller Polypropylene

Pump shaft Stainless steel (X40Cr13)

L N PE
Blocking current-proof motor Bearing Carbon, metal impregnated
Single-phase motor (EM) 2pole 1~230 V, 50 Hz
With built-in capacitor Minimum suction head at suction port for avoiding
cavitation at water pumping temperature
Minimum suction head at 50 / 95 / 110
0.5 / 3 / 10 m
°C

Information for order placements

Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 14 / 25

ATAC Solutions

01622 882400 /
info@atacsolutions.com

Data sheet: Wilo-Star-STG 25/6

Make Wilo

Type Star-STG 25/6

Art no. 4050266

Weight approx. m 2.70 kg

Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 15 / 25

 ATAC Solutions

01622 882400 /
info@atacsolutions.com

Data sheet: Wilo-Star-STG 25/6.5

Pump curves Approved fluids (other fluids on request)

0 1 2 3 4 5 Rp½
m/s
0 0,4 0,8 1,2 1,6 2,0 Rp1 Heating water (in accordance with VDI
•
H/m
Wilo-Star-STG 2035)
7 15/6,5, 25/6,5
1~230 V - Rp ½ / Rp 1 Water-glycol mixtures (max. 1:1; above
6 20% admixture, the pumping data •
5 must be checked)

4 Permitted field of application

ma
3 x.
Temperature range at max. ambient •
2 temperature +40 °C -10 to +110 °C (in short-term
operation 2 h: +120 °C)
1 min
.
0 Maximum permissible
0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 Q/m³/h Pmax 10 bar
operating pressure
0 0,2 0,4 0,6 0,8 1,0 Q/l/s
Pipe connections
0 2 4 6 8 10 12 Q/Igpm
P1/W Threaded pipe union Rp 1

80 max. Thread G 1½

40 min. Overall length L0 180 mm

0
0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 Q/m³/h Motor/electronics
Electromagnetic compatibility EN 61800-3

Dimension drawing Emitted interference EN 61000-6-3

100
54 Interference resistance EN 61000-6-2

PG 11 Protection class IP 44
54

Insulation class F

Mains connection 1~230 V, 50 Hz

180

Speed 1178 - 2170 / 1714 - 2604 /

n
90

78
2303 - 2707 rpm

Power consumption P1 35 / 52 / 70 W
G 1½ 33 96
(Rp 1) Current consumption I 0.16 / 0.24 / 0.30 A
92,5
Motor protection Not required (blocking-current
proof)
Terminal diagram
Threaded cable connection PG 1x11

Materials
Pump housing Grey cast iron (EN-GJL-200)

Impeller Polypropylene

Pump shaft Stainless steel (X40Cr13)

L N PE Bearing Carbon, metal impregnated
Blocking current-proof motor
Single-phase motor (EM) 2pole 1~230 V, 50 Hz Minimum suction head at suction port for avoiding
With built-in capacitor
cavitation at water pumping temperature
Minimum suction head at 50 / 95 / 110
0.5 / 3 / 10 m
°C

Information for order placements

Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 16 / 25

ATAC Solutions

01622 882400 /
info@atacsolutions.com

Data sheet: Wilo-Star-STG 25/6.5

Make Wilo

Type Star-STG 25/6.5

Art no. 4050267

Weight approx. m 2.520 kg

Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 17 / 25

 ATAC Solutions

01622 882400 /
info@atacsolutions.com

Data sheet: Wilo-Star-STG 25/7

Pump curves Approved fluids (other fluids on request)

v
0 0,5 1,0 1,5 2,0 2,5 3,0 Rp1
m/s Heating water (in accordance with VDI
0 0,5 1,0 1,5 2,0 Rp1¼ •
2035)
H/m Wilo-Star-STG
25/7, 30/7 Water-glycol mixtures (max. 1:1; above
1~230 V - Rp 1 / Rp 1¼
8 20% admixture, the pumping data •
must be checked)
6
ma
x. Permitted field of application
4 Temperature range at max. ambient •
temperature +40 °C -10...+110 °C
m
2 in
.
Maximum permissible
Pmax 10 bar
operating pressure
0
0 1 2 3 4 5 6 Q/m³/h
0 0,4 0,8 1,2 1,6 Q/l/s Pipe connections
0 4 8 12 16 20 Q/Igpm
Threaded pipe union Rp 1
P1/W

150 max.
Thread G 1½
100
min. Overall length L0 180 mm
50

0 Motor/electronics
0 1 2 3 4 5 6 Q/m³/h

Electromagnetic compatibility EN 61800-3

Dimension drawing Emitted interference EN 61000-6-3

101
54 G 1½ Interference resistance EN 61000-6-2

Protection class IP 44
PG 11
90

Insulation class F
79

Mains connection 1~230 V, 50 Hz

180

Speed 1000 - 2300 / 1600 - 2650 /

n
2200 - 2800 rpm
91
Power consumption P1 62 / 92 / 132 W
32 109
93,5 Current consumption I 0.30 / 0.42 / 0.58 A

Motor protection Not required (blocking-current

Terminal diagram proof)

Threaded cable connection PG 1x11

Materials
Pump housing Grey cast iron (EN-GJL-200)

Impeller Plastic (PP - 40% GF)

Pump shaft Stainless steel (X40Cr13)

L N PE
Bearing Carbon, metal impregnated
Blocking current-proof motor
Single-phase motor (EM) 2pole 1~230 V, 50 Hz
Minimum suction head at suction port for avoiding
With built-in capacitor
cavitation at water pumping temperature
Minimum suction head at 50 / 95 / 110
0.5 / 3 / 10 m
°C

Information for order placements

Make Wilo

Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 18 / 25

ATAC Solutions

01622 882400 /
info@atacsolutions.com

Data sheet: Wilo-Star-STG 25/7

Type Star-STG 25/7

Art no. 4111192

Weight approx. m 3.80 kg

Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 19 / 25

 ATAC Solutions

01622 882400 /
info@atacsolutions.com

Data sheet: Wilo-Star-STG 30/7

Pump curves Approved fluids (other fluids on request)

v
0 0,5 1,0 1,5 2,0 2,5 3,0 Rp1
m/s Heating water (in accordance with VDI
0 0,5 1,0 1,5 2,0 Rp1¼ •
2035)
H/m Wilo-Star-STG
25/7, 30/7 Water-glycol mixtures (max. 1:1; above
1~230 V - Rp 1 / Rp 1¼
8 20% admixture, the pumping data •
must be checked)
6
ma
x. Permitted field of application
4 Temperature range at max. ambient •
temperature +40 °C -10...+110 °C
m
2 in
.
Maximum permissible
Pmax 10 bar
operating pressure
0
0 1 2 3 4 5 6 Q/m³/h
0 0,4 0,8 1,2 1,6 Q/l/s Pipe connections
0 4 8 12 16 20 Q/Igpm
Threaded pipe union Rp 1¼
P1/W

150 max.
Thread G2
100
min. Overall length L0 180 mm
50

0 Motor/electronics
0 1 2 3 4 5 6 Q/m³/h

Electromagnetic compatibility EN 61800-3

Dimension drawing Emitted interference EN 61000-6-3

101
54 G2 Interference resistance EN 61000-6-2

Protection class IP 44
PG 11
90

Insulation class F
79

Mains connection 1~230 V, 50 Hz

180

Speed 1000 - 2300 / 1600 - 2650 /

n
2200 - 2800 rpm
91
Power consumption P1 62 / 92 / 132 W
32 109
93,5 Current consumption I 0.30 / 0.42 / 0.58 A

Motor protection Not required (blocking-current

Terminal diagram proof)

Threaded cable connection PG 1x11

Materials
Pump housing Grey cast iron (EN-GJL-200)

Impeller Plastic (PP - 40% GF)

Pump shaft Stainless steel (X40Cr13)

L N PE
Bearing Carbon, metal impregnated
Blocking current-proof motor
Single-phase motor (EM) 2pole 1~230 V, 50 Hz
Minimum suction head at suction port for avoiding
With built-in capacitor
cavitation at water pumping temperature
Minimum suction head at 50 / 95 / 110
0.5 / 3 / 10 m
°C

Information for order placements

Make Wilo

Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 20 / 25

ATAC Solutions

01622 882400 /
info@atacsolutions.com

Data sheet: Wilo-Star-STG 30/7

Type Star-STG 30/7

Art no. 4111193

Weight approx. m 3.0550 kg

Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 21 / 25

 ATAC Solutions

01622 882400 /
info@atacsolutions.com

Data sheet: Wilo-Star-STG 25/8

Pump curves Approved fluids (other fluids on request)

v
0 0,5 1,0 1,5 2,0 2,5 3,0 Rp1 Heating water (in accordance with VDI
m/s •
0 0,5 1,0 1,5 2,0 Rp1¼ 2035)
H/m Wilo-Star-STG
25/8, 30/8 Water-glycol mixtures (max. 1:1; above
1~230 V - Rp 1 / Rp 1¼
8 20% admixture, the pumping data •
must be checked)
6 ma
x.
Permitted field of application
4 Temperature range at max. ambient •
temperature +40 °C -10...+110 °C
m
in
2 .
Maximum permissible
Pmax 10 bar
operating pressure
0
0 1 2 3 4 5 6 Q/m³/h
0 0,4 0,8 1,2 1,6 Q/l/s Pipe connections
0 4 8 12 16 20 Q/Igpm
Threaded pipe union Rp 1
P1/W max.
150 Thread G 1½
100 min.
Overall length L0 180 mm
50

0 Motor/electronics
0 1 2 3 4 5 6 Q/m³/h

Electromagnetic compatibility EN 61800-3

Dimension drawing Emitted interference EN 61000-6-3

116
58 G 1½ Interference resistance EN 61000-6-2

Protection class IP 44
PG 11
90

Insulation class F
79

Mains connection 1~230 V, 50 Hz

180

Speed 930 - 2122 / 1505 - 2404 /

n
2035 - 2760 rpm
88
Power consumption P1 81 / 113 / 151 W
33 119
93,5 Current consumption I 0.40 / 0.60 / 0.76 A

Motor protection Not required (blocking-current

Terminal diagram proof)

Threaded cable connection PG 1x11

Materials
Pump housing Grey cast iron (EN-GJL-200)

Impeller Plastic (PP - 40% GF)

Pump shaft Stainless steel (X40Cr13)

L N PE
Bearing Carbon, metal impregnated
Blocking current-proof motor
Single-phase motor (EM) 2pole 1~230 V, 50 Hz
Minimum suction head at suction port for avoiding
With built-in capacitor
cavitation at water pumping temperature
Minimum suction head at 50 / 95 / 110
0.5 / 3 / 10 m
°C

Information for order placements

Make Wilo

Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 22 / 25

ATAC Solutions

01622 882400 /
info@atacsolutions.com

Data sheet: Wilo-Star-STG 25/8

Type Star-STG 25/8

Art no. 4108817

Weight approx. m 3 kg

Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 23 / 25

 ATAC Solutions

01622 882400 /
info@atacsolutions.com

Data sheet: Wilo-Star-STG 30/8

Pump curves Approved fluids (other fluids on request)

v
0 0,5 1,0 1,5 2,0 2,5 3,0 Rp1 Heating water (in accordance with VDI
m/s •
0 0,5 1,0 1,5 2,0 Rp1¼ 2035)
H/m Wilo-Star-STG
25/8, 30/8 Water-glycol mixtures (max. 1:1; above
1~230 V - Rp 1 / Rp 1¼
8 20% admixture, the pumping data •
must be checked)
6 ma
x.
Permitted field of application
4 Temperature range at max. ambient •
temperature +40 °C -10...+110 °C
m
in
2 .
Maximum permissible
Pmax 10 bar
operating pressure
0
0 1 2 3 4 5 6 Q/m³/h
0 0,4 0,8 1,2 1,6 Q/l/s Pipe connections
0 4 8 12 16 20 Q/Igpm
Threaded pipe union Rp 1¼
P1/W max.
150 Thread G2
100 min.
Overall length L0 180 mm
50

0 Motor/electronics
0 1 2 3 4 5 6 Q/m³/h

Electromagnetic compatibility EN 61800-3

Dimension drawing Emitted interference EN 61000-6-3

116
58 G2 Interference resistance EN 61000-6-2

Protection class IP 44
PG 11
90

Insulation class F
79

Mains connection 1~230 V, 50 Hz

180

Speed 930 - 2122 / 1505 - 2404 /

n
2035 - 2760 rpm
88
Power consumption P1 81 / 113 / 151 W
33 119
93,5 Current consumption I 0.40 / 0.60 / 0.76 A

Motor protection Not required (blocking-current

Terminal diagram proof)

Threaded cable connection PG 1x11

Materials
Pump housing Grey cast iron (EN-GJL-200)

Impeller Plastic (PP - 40% GF)

Pump shaft Stainless steel (X40Cr13)

L N PE
Bearing Carbon, metal impregnated
Blocking current-proof motor
Single-phase motor (EM) 2pole 1~230 V, 50 Hz
Minimum suction head at suction port for avoiding
With built-in capacitor
cavitation at water pumping temperature
Minimum suction head at 50 / 95 / 110
0.5 / 3 / 10 m
°C

Information for order placements

Make Wilo

Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 24 / 25

ATAC Solutions

01622 882400 /
info@atacsolutions.com

Data sheet: Wilo-Star-STG 30/8

Type Star-STG 30/8

Art no. 4108818

Weight approx. m 3.7390 kg

Subject to change without prior notice. www.wilo.co.uk 50 Hz EU 2013-02 25 / 25