Keysight Technologies

Infiniium 90000 Series Oscilloscopes

Data Sheet
02 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Table of Contents
Why Choose Keysight Oscilloscopes for Your Toughest High-Speed
Measurement Challenges?��������������������������������������������������������������������������������������������������������������03
Engineered for Unmatched Real-Time Measurement Accuracy����������������������������������������������������������������04
Keysight Infiniium Portfolio�������������������������������������������������������������������������������������������������������������������������� 19
Infiniium 90000A Series������������������������������������������������������������������������������������������������������������������������������20
InfiniiMax II: The World’s Best High-Speed Probing System Just Keeps Getting Better��������������������������22
Infiniium 90000A Series Oscilloscopes������������������������������������������������������������������������������������������������������� 24
InfiniiMax II Series����������������������������������������������������������������������������������������������������������������������������������������34
Infiniium 90000 Series Ordering Information����������������������������������������������������������������������������������������������36
Keysight Oscilloscopes��������������������������������������������������������������������������������������������������������������������������������39
Evolving Since 1939������������������������������������������������������������������������������������������������������������������������������������� 41
03 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Why Choose Keysight Oscilloscopes for Your Toughest

Engineered for
High-Speed Measurement Challenges? unmatched real-time
As an engineer you’re no stranger to tough challenges that help you exceed your measurement accuracy
customer’s needs and expectations. Deploying your next design successfully is even
more difficult with today’s high speed technologies. Data signal eye openings become
smaller and measurement error from your oscilloscope becomes less tolerable. Keysight
Technologies, Inc. is committed to providing the best measurement solutions for these
critical challenges.

The Keysight Infiniium 90000 Series oscilloscopes are engineered to give you unmatched
real-time measurement accuracy so you can:
1. Use your jitter budget in your design, not on your scilloscope.
2. Pass today’s demanding compliance tests more quickly.
3. Debug your toughest designs with confidence.

90000A Series Infiniium oscilloscopes

Model Real-time Maximum sampling Standard memory Maximum memory Noise floor at
bandwidth on 4 ch rate on 4 ch 50 mV/div
91304A 13 GHz 40 GSa/s on 4 ch 20 Mpts on 4 ch 1 Gpts on 4 ch 1.73 mVrms
91204A 12 GHz 40 GSa/s on 4 ch 20 Mpts on 4 ch 1 Gpts on 4 ch 1.45 mVrms
90804A 8 GHz 40 GSa/s on 4 ch 20 Mpts on 4 ch 1 Gpts on 4 ch 1.15 mVrms
90604A 6 GHz 20 GSa/s on 4 ch 1 20 Mpts on 4 ch 1 Gpts on 4 ch 0.98 mVrms
90404A 4 GHz 20 GSa/s on 4 ch 1 20 Mpts on 4 ch 1 Gpts on 4 ch 0.79 mVrms
90254A 2.5 GHz 20 GSa/s on 4 ch 1 20 Mpts on 4 ch 1 Gpts on 4 ch 0.64 mVrms

1.  DSA model numbers come standard with 50 Mpts of memory on 4 ch.

How much time span can I capture?

Sampling rate 20 Mpts of 50 Mpts of 100 Mpts of 200 Mpts of 500 Mpts of 1 Gpts of
memory memory memory memory memory memory
40 GSa/s 500 μs 1.25 ms 2.5 ms 5.0 ms 12.5 ms 25.0 ms
20 GSa/s 1 ms 2.5 ms 5.0 ms 10.0 ms 25.0 ms 50.0 ms

Note: time span capture = memory depth x 1/ sampling rate.

04 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Engineered for Unmatched Real-Time Measurement Accuracy

Use your jitter budget in your design, not on your oscilloscope
Keysight’s Infiniium 90000 Series oscilloscopes offer the industry’s lowest noise floor
and most accurate real-time jitter measurements available on scopes of this bandwidth
class. Complete with full-bandwidth probing solutions and hardwareaccelerated
de-embedding and equalization techniques, Keysight oscilloscopes are the best
oscilloscope solution for today’s demanding high-speed measurements.

The industry’s lowest noise floor

Leveraging the company expertise in RF design, Keysight has invested in key technology
blocks like our proprietary Faraday caged front end to significantly reduce our
inherent scope noise floor. The result: the lowest noise floor available on any real-time
oscilloscope from 2.5 GHz to 12 GHz.

The industry’s deepest memory

With 1 Gbyte of memory, low-frequency jitter components can be more quickly resolved
in a single measurement. Statistical accuracy is improved with more data collection.
Keysight’s integrated deep memory remains responsive and allows more comprehensive
testing, supporting pattern lengths up to PRBS23 for accurate transmitter and receiver
results.

We add full bandwidth probing and accurate de-embedding and

equalization software
The performance of Keysight’s oscilloscopes is matched by the superiority of our
probing, de-embedding and equalization offerings. Maintain full bandwidth performance
to the probe tip with our InfiniiMax probing solutions.Render waveforms anywhere
in the digital serial link with our hardware accelerated N5465A InfiniiSim Waveform
Transformation Toolset. Configurable system modeling allows you to remove the
deleterious effects of unwanted channel elements, simulate waveforms with channel
models inserted, view waveforms in physically unprobeable locations, and compensate
for loading of probes and fixtures. The N5461A Serial Data Equalization software allows
you to model equalization techniques in real time.
05 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Engineered for Unmatched Real-Time Measurement Accuracy (Continued)

Pass today’s demanding compliance tests more quickly
Offering the industry’s widest range of available compliance applications to provide
fast setup for complete, automated compliance and margin testing and reporting, the
Keysight 90000 Series scopes have become the go-to tool for test houses worldwide.
Our experts serve on the industry standards committees, and our oscilloscopes are
certified on today’s high speed serial data standards. Plus our 1G memory supports
real-time testing to pattern lengths of PRBS23 to stress your design to the max.

Choose from a wide range of complete compliance applications

Choose from the industry’s widest range of complete applications for the Infiniium 90000
Series to ensure compliance to the leading industry standards, including SATA, PCI
EXPRESS®, Ethernet, USB, and more. Comprehensive set-up wizards and full automation
of the required testing take the guesswork out of demonstrating compliance quickly. Get
further insight with our protocol and analysis decode available on PCI EXPRESS, SATA
and USB.

Put Keysight’s experts on your team

Keysight’s measurement experts sit on the industry standards committees and help
define the compliance requirements. They make sure our tools deliver exactly to the
standards. You get the benefit of years of training and experience on every measurement
you make.

Free up valuable engineering resources

Set-up wizards combined with intelligent test filtering make it simple to ensure the right
tests are being run. Comprehensive HTML reports with visual documentation and pass/
fail results guarantee that critical information is retained on each test. Technicians can
run complete and accurate testing on their own, freeing valuable engineering resources.

PrecisionProbe
Keysight’s N2809A-1NL PrecisionProbe software quickly characterizes and compensates
the frequency response of any path to the 90000 Series input. PrecisionProbe’s patented
technology uses the < 15ps edge from the 90000 Series oscilloscope to:

–– Measure input impedance and response of any probe and the loss of any
cableQuickly correct from probe and cable loss(without extra instruments such as
VNA or TDR)
–– Quickly correct from probe and cable loss(without extra instruments such as VNA or
TDR)
–– Correct probing issues such as phase nonlinearity, magnitude non-flatness, and see
the effect of probe loading PrecisionProbe uses Keysight’s proprietar
200 GHz indium phosphide process to
–– Quickly gain insight into impedance/capacitance that defines your connection
create a fast edge for characterization with
PrecisionProbe.
06 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Engineered for Unmatched Real-Time Measurement Accuracy (Continued)

Debug your toughest designs with confidence
The 90000 series boasts an ever-expanding set of measurement applications for serial
debugging and protocol viewing, jitter testing, advanced triggering, measurement
customization, and rapid automation. Put the power of the scope to work for your unique
debug and analysis challenges.

Streamline your debug and analysis tasks with the industry’s widest
range of application software
Whether you need to trigger and decode serial buses, iron out the kinks in your memory
designs, or see FFT based spectrum analysis of your signal, the Infiniium 90000 Series
has application software to help. Our serial protocol views are unique to oscilloscopes,
and our DDR debug tools support multiple generations of the standard. Quickly access
additional features from the scope’s standard menus.

Customize your scope for even more efficiency

The N5414B-1NL InfiniiScan Event Identification software makes unique capabilities
like Zone Qualify and Generic Serial triggering possible. Rapidly automate any scope
measurement using the N5467B-1NL User Defined Application and have it appear
seamlessly in your scope’s menu. Customize your Infiniium further by taking full
advantage of MyInfiniium (standard on all 90000A Series oscilloscopes). Use MyInfiniium
to deliver automated measurements, execute customized scripts, save screenshots, or
load your favorite setup.

Add measurement capability with MATLAB compatibility

If we haven’t provided exactly what you need, take customization to a new level with
MATLAB (Option 062) - a data analysis software environment and scripting language
with over 1,000,000 users today. Use MATLAB to design and apply your own filters to
oscilloscope signals, graphically visualize oscilloscope signals in 2-D and 3-D plots,
automate measurements, and build test applications. Add the N5430A-1NL User Defined
Function software to your scope to seamlessly integrate your custom functionality into
the Infiniium 90000 menus so results are displayed on the scope screen. Keysight is the
only T&M manufacturer today that sells and supports MATLAB as its own product as part
of a complete T&M solution.
07 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Engineered for Unmatched Real-Time Measurement Accuracy (Continued)

Debug your toughest designs with confidence (Continued)
I2C/SPI serial trigger and decode (N5391A-1NL or Option 007 on
new scope purchases)
Given even further insights with protocol decode capability. Quickly move between
physical and protocol layer information using the time-correlated tracking marker.
Display protocol content using waveform symbols and the industry’s first multi-tab
protocol viewer. The packets tab shows a high level view of the packet over time.

Trigger and view on-screen serial decode of

I2C packets

Frequency domain analysis

Infiniium’s built-in FFT allows users to quickly and easily analyze the frequency
components of their signals. Both FFT magnitude and phase can be displayed and
can be combined with other built-in math functions or Matlab based measurements.
A resolution bandwidth of 6 kHz is supported with the standard 10 Megabytes of
acquisition memory at the maximum sample rate of 40 GSa/s. With optional acquisition
memory installed resolution bandwidths of 2 kHz can be obtained. Standard windowing
of Hanning, Flattop and Rectangular are supported along with cursor based power
measurements. When more powerful frequency domain measurements are required
including modulation analysis, consider the Keysight 89601A Vector Signal Analyzer
software.

Hardware accelerated differential and common mode math

Select the channel menu and enable differential mode to enable hardware accelerated
math capability. Enjoy full channel functionality including InfiniiScan triggering and jitter
analysis. Save time, by using the hardware acceleration for even faster update rates with
your differential and common mode math needs.
08 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Engineered for Unmatched Real-Time Measurement Accuracy (Continued)

Debug your toughest designs with confidence (Continued)
EZJIT analysis software (E2681A-1NL or option 002 on new scope
purchases)
Quickly characterize and evaluate most commonly needed jitter measurements,
including cycle-cycle, N-cycle, period, time-interval, error, setup and hold time,
histograms, measurement trending and jitter spectrum.

Includes advanced clock recovery options such as constant frequency and PLL. Make
measurements on repetitive or arbitrary data.

This application is supported on all models and is standard on DSA models.

Conduct jitter analysis.

For more information: www.keysight.com/find/EZJIT

EZJIT Plus analysis software (N5400A-1NL or Option 004 on new

scope purchases. To upgrade from EZJIT to EZJIT Plus, order
N5401A.)
EZJIT Plus adds additional compliance views and an expanded measurement setup
wizard to simplify and automate RJ/DJ separation for testing against industry standards.

This application is supported on all models and is standard on DSA models.

For more information: www.keysight.com/find/EZJITPlus

Analyze jitter plus RJ/DJ separation.

EZJIT Complete analysis software (N8813A-1NL or Option 070 on

new scope purchases)
EZJIT Complete includes all of the advanced jitter analysis capabilities of EZJIT and
EZJIT Plus, and adds advanced analysis of the vertical noise affecting the ones and
zeros of your real-time eye. Decomposition of vertical noise provides key insight into
degradation of your eye height. In providing advanced decomposition of both
horizontal jitter and vertical noise components of your signals, EZJIT Complete
represents the most comprehensive analysis software available.

This application is supported on all models and is a standard on DSA models. EZJIT Complete.

For more information: www.keysight.com/find/EZJITComplete

09 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Engineered for Unmatched Real-Time Measurement Accuracy (Continued)

Debug your toughest designs with confidence (Continued)
InfiniiScan event identification (N5414B-1NL or Option 009 on new
scope purchases)
Rapidly trigger on complex events and identify signal integrity issues. This innovative
software quickly scans through thousands of acquired waveform cycles and isolates
anomalous signal behavior.

This application is supported on all models.

For more information: www.keysight.com/find/infiniiScan

Identify signal integrity issues with
InfiniiScan Zone – Qualify triggering.

PrecisionProbe software (N2809A-1NL or Option 001 on new scope

purchases)
Make more accurate measurements independent of what probes or cables used.
Keysight’s N2809A PrecisionProbe software characterizes and corrects for the loss in
your specific cable or probe. PrecisionProbe removes the uncertainty about the input
connected to your oscilloscope by allowing you to see its characteristics in less than
five minute. PrecisionProbe gives you design and debug confidence by allowing you to
quickly de-embed probe and cable loss to make more accurate measurements.

For more information: www.keysight.com/find/PrecisionProbe

Quickly characterize and correct for any
input to your oscilloscope.

High-speed serial data analysis software (E2688A-1NL or Option

003 on new scope purchases)
Quickly validate signal integrity for high-speed serial interfaces with embedded clocks.
Recover embedded clocks synchronized with the analog waveform view. Build and
validate eye diagrams.

The SDA package also includes software-based bit-level triggering and decode for
8B/10B. This application is supported on all models and comes standard on DSA models.

For more information: www.keysight.com/find/SDA

Recover embedded clocks with serial data
analysis (SDA).
10 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Engineered for Unmatched Real-Time Measurement Accuracy (Continued)

Debug your toughest designs with confidence (Continued)
Infiniium remote programming interface (Now standard on all
Infiniium scopes)
Operate your Infiniium compliance and validation applications remotely using .NET
languages.

This application is supported on all models.

For more information: www.keysight.com/find/RPI

Control your applications remotely.

Serial data equalization (N5461A-1NL or Option 012 on new scope

purchases)
Measure at the pin and use equalization to see a virtual eye on the other side of an
equalizer. Model equalization techniques such as DFE, FFE, and CTLE.

This application is supported on all models.

For more information: www.keysight.com/find/SDE

Reduce receiver errors by opening tightly

shut eyes.

InfiniiSim waveform transformation and de-embedding toolset

(Basic: N5465A-3NL or Option 13 on new scope purchases.
Advanced: N5465A-1NL or Option 14 on new scope purchases.)
The N5465A InfiniiSim waveform transformation toolset for Infiniium Series
oscilloscopes provides the most flexible and accurate means to render waveforms
anywhere in the digital serial link. The configurable system modeling allows you to
remove the deleterious effects of unwanted channel elements, simulate waveforms
with channels models inserted, view waveforms in physically un-probable locations,
compensate for loading of probes and other circuit elements, and do so simply and
quickly on the real-time oscilloscope.
Model channel effects including reflection.

This application is supported on all models.

For more information: www.keysight.com/find/InfiniiSim

11 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Engineered for Unmatched Real-Time Measurement Accuracy (Continued)

Debug your toughest designs with confidence (Continued)
MATLAB data analysis software (Option 061 or O62 on new scope
purchases)
MATLAB is a data analysis software environment and scripting language used by over
1,000,000 users in aerospace/defense, automotive, communications, electronics, and
other applications. MATLAB is now available directly from Keysight as in instrument
option with the purchase of your Keysight 90000 Series oscilloscope. Install MATLAB
on your oscilloscope or remote PC to make customized measurements, design and
apply your own filters to oscilloscope signals, graphically visualize signals in 2-D or 3-D
plots, automate measurements, or build test applications. Purchase MATLAB with your
Keysight 90000 Series oscilloscope to ensure version compatibility and so that your Control your applications remotely.
MATLAB software license is always available when you need it.

For more information: www.keysight.com/find/matlab_oscilloscopes

User-definable application (N5467B-1NL or Option 040 on new

scope purchases)
Rapidly develop your own automated measurements and tests. This application
provides the framework you need to quickly program and automate any single or set of
measurements the oscilloscope can make. The application also provides full control of
other Keysight instruments and HTML reporting capabilities.

For more information: www.keysight.com/find/UDA

Quickly automate oscilloscope

measurements.

User-defined function (N5430A-1NL or Option 010 on new scope

purchases)
If we haven’t provided exactly what you need, use the N5430A User Defined Function
software to create it yourself. Develop your own math functions or filters using MATLAB.
Your custom functionality is seamlessly integrated into the Infiniium 90000 menus and
results are displayed on the scope screen. This requires MATLAB (available as Option
062) to be installed directly on the oscilloscope. Keysight is the only T&M manufacturer
today that sells and supports MATLAB as its own product.

This application is supported on all models and requires MATLAB software (not included Signal equalization using user-defined
with UDF). function.

For more information: www.keysight.com/find/UDF

12 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Engineered for Unmatched Real-Time Measurement Accuracy (Continued)

Debug your toughest designs with confidence (Continued)
Vector signal analysis software (89601A)
Expand the measurement capability of your scope with the 89601A vector signal analysis
software. This advanced DSP-based software takes the digitized signal data from the
scope and displays FFT-based spectrum analysis and wide-bandwidth digital modulation
analysis for wireless communication signals such as W-CDMA and cdma2000 ® and
wireless networking signals such as 802.11 WiFi and 802.16 WiMAX®.

Take advantage of the super-wide bandwidth of your scope to capture and evaluate
radar signals.

Use vector signal analysis software to see

For more information: www.keysight.com/find/VSA
FFT-based spectrum analysis.

I2C/SPI serial trigger and decode (N5391A-1NL or Option 007 on

new scope purchases)
This application displays real-time time-aligned decode of I2C and SPI packets. View
decode in waveform area or in protocol lister.

This application works on all models.

For more information: www.keysight.com/find/90000_I2C-SPI

Trigger and view on-screen serial decode of

I2C packets.

JTAG (IEEE 1149.1) triggering and decode (N8817A-1NL or Option

042 on new scope purchases)
This application displays real-time time-aligned decode of JTAG (IEEE 1149.1) TDI and
TDO signals. The application eliminates the difficult task of manually determining JTAG
TAP controller states, instruction and data register decode, and flags error conditions.
The application includes scan chain description features including the ability to import
.bsdl files for each device and displays device names and opcodes in the protocol listing.

This application works on all models and can use any combination of scope or logic
acquisition channels. Trigger on and decode JTAG packets.

For more information: www.keysight.com/find/90000_JTAG

13 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Engineered for Unmatched Real-Time Measurement Accuracy (Continued)

Debug your toughest designs with confidence (Continued)
RS-232/UART serial decode and trigger (N5462A-1NL or Option 015
on new scope purchases)
This application eliminates the need to manually decode bus traffic. Using data captured
on the scope channels, the application lets you easily view the information sent over an
RS-232.

Display real-time time-aligned decode of transmit and receive lines.

This application works on all models.

For more information: www.keysight.com/find/90000_RS-232

Trigger on and decode RS-232/UART
transmission.

N8805A-1NL USB 3.0 protocol triggering and decode

Trigger on and view USB 3.0 with the industry’s first oscilloscope-based protocol
analyzer with time-correlated views of physical layer and transaction layer errors. The
multi-tab protocol viewer includes correlation between the waveforms and the selected
packet, enabling you to quickly move between the physical and protocol layer using the
time-correlated tracking marker.

For more information: www.keysight.com/find/usb3decode

Isolate signal integrity problems from

logic-level coding errors on bidirectional
serial data streams.
14 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Engineered for Unmatched Real-Time Measurement Accuracy (Continued)

Pass today’s demanding compliance tests more quickly
USB serial trigger and protocol viewer (N5464A-1NL or Option 016
on new scope purchases)
Trigger on and quickly view USB 2.0 packets, payload, header and detail information.
Powerful time-correlated views of waveform and symbol, to the bit level, make it easy to
isolate communication faults.

This application is supported on all models.

For more information: www.keysight.com/find/90000_USB_protocol_viewer

Trigger on and decode USB packets.

PCI EXPRESS serial trigger and protocol viewer (N5463A-1NL or

Option 017 on new scope purchases)
This application provides protocol-level triggering and viewing of a PCIe ® lane. Quickly
view packets, payload, header, and detail information. Powerful time-correlated views of
waveform, symbol, character, link and transaction layer packet data down to the bit level
make it easy to isolate communication faults to logic or analog sources.

This application is supported on all 4 GHz and greater models.

For more information: www.keysight.com/find/90000_PCI_protocol_viewer

Trigger on and decode PCIe serial packets.

SATA triggering and decode (N8801A-1NL or Option 018 on new

scope purchases)
Trigger on and view both protocol layer information and physical layer signal
characteristics for SATA 1.5 Gb/s, 3.0 Gb/s, and 6.0 Gb/s. Numerical decode values are
automatically displayed and synchronizes below the capture signal or seen in protocol
viewer.

This application works on all models.

For more information: www.keysight.com/find/N8801A

Trigger on and decode SAS/SATA serial
packets.
15 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Engineered for Unmatched Real-Time Measurement Accuracy (Continued)

Pass today’s demanding compliance tests more quickly (Continued)
MIPI® D-PHYSM trigger and decode (N8802A-1NL or Option 019 on
new scope purchases)
This application eliminates the need to manually decode bus traffic. Using data
captured on the scope, the application lets you easily view the information sent over MIPI
serial buses.

The application also enables software based protocol triggering.

This application is supported on all models ≥ 4 GHz bandwidth.

Trigger on and decode MIPI packets.

For more information: www.keysight.com/find/N8802Ar

Ethernet compliance testing (N5392B-3NL or Option 021 on new

scope purchases)
Perform a wide range of electrical tests for 10-, 100-, and 1000-Base-T systems. An
N5395B or N5395C test fixture and N5396A jitter test cable speed compliance testing.

This application is supported on all models.

For more information: www.keysight.com/find/N5392B

Validate Ethernet compliance.

PCI EXPRESS electrical performance validation and compliance

Software (N5393F or Option 022 on new scope purchases)
Provides fast and easy way to verify and debug your PCI EXPRESS designs. Allows you
to automatically execute PCI EXPRESS electrical checklist tests, and displays the results
in a flexible report format. Ensures that your Gen2 measurements will have absolute
consistency with measurements made using the PCI-SIG’s standalone Sigtest software.

For more information: www.keysight.com/find/N5393D

Quickly verify and debug your PCI EXPRESS

designs.

HDMI electrical performance validation and compliance software

Quickly verify and debug your High Definition Multi-media Interface (HDMI) designs.
The N1080A fixture provides access to the compliance points for the electrical
measurements required for the transmitter compliance testing.

Switch matrix support is available by ordering N5399C-7NL (Option 702 on new scope
purchases). This application is support on all models ≥ 8 GHz bandwidth.

For more information: www.keysight.com/find/N5399C Verify and debug your HDMI designs.
16 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Engineered for Unmatched Real-Time Measurement Accuracy (Continued)

Pass today’s demanding compliance tests more quickly (Continued)
Energy efficient ethernet application (N5392B-1NL or Option 060 on
new scope purchases)
Industry leading compliance application that measures 10/100/1000BTe Energy Efficient
Ethernet IEEE 802.3az-2010 specification. Exclusive EEE fixture allows you to measure
all test modes at all speeds. Detailed reporting with clear measurements and pass/fail
results.

Characterize and evaluate the signal

This application is supported on all models.
integrity of your Energy Efficient Ethernet
devices.
For more information: www.keysight.com/find/EEE

SATA 6G compliance test software (N5411B-1NL or Option 038 on

new scope purchases)
Rapidly validate and debug your SATA 1.5Gb/s (Gen 1), 3.0 Gb/s (Gen2) and 6.0 Gb/s
(Gen3) silicon, host bus adapter, port multiplier, high-density disk drive, solid-state
disk drive or optical disk drive. Provides automated compliance test support for the i
(internal), m(eSATA) and x(SAS attachment) interfaces points, and displays the results in
a flexible report format.

This application is supported on all models ≥ 12 GHz bandwidth.

For more information: www.keysight.com/find/N5411B Simplify the validation of SATA designs.

DisplayPort 1.2 compliance test software (U7232C-1NL or Option

045 on new scope purchases)
Sets the benchmark for ease-of-use, and offers complete testing without compromise.
The software guides the user sequentially through the tasks ensuring minimal setup
error, executes the tests specified by the standard and conveys the test information
through a convenient software generated report. The three modes of physical layer
test allow for automated measurements based on the customizable configuration
Full suite of DisplayPort source tests.
of compliance and characterization testing. To make the test signal connection, the
Keysight W2641B DisplayPort test point access adaptor completes the DisplayPort
source solution.

DisplayPort 1.2 also comes with switch matrix support to make multi-lane testing
significantly easier by ordering U7232C-7NL (Option 701 on new scope purchases). The
application is supported on all models ≥ 8 GHz.

For more information: www.keysight.com/find/U7232C

17 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Engineered for Unmatched Real-Time Measurement Accuracy (Continued)

Pass today’s demanding compliance tests more quickly (Continued)
USB 2.0 compliance test software (N5416A-1NL or Option 029 on
new scope purchases)
Quickly determine USB compliance with this USB-IF recognized solution. A setup wizard
guides you through test selection and configuration.

This application is supported on all models.

For more information: www.keysight.com/find/N5416A

Check for USB compliance.

XAUI electrical validation with 10GBASE-CX4, CPRI, OBSAI, and

Serial RapidIO support (N5431A-1NL or Option 030 on new scope
purchases)
Improve your efficiency by confirming that your devices conform to the XAUI
specifications as defined by the IEEE 802.3-2005 10-gigabit Ethernet specification.
Provides support for the XAUI-derived 10GBASE-CX4 specification.

The application is supported on all models.

For more information: www.keysight.com/find/N5431A Perform automated testing and margin

analysis for XAUI and XAUI-derived
specifications.

MIPI D-PHY compliance test software (U7238C-1NL or Option 035

on new scope purchases)
Automatically execute D-PHY electrical checklist tests for CSI and DSI architectures.
Displays the results in a flexible report format.

MIPI D-PHY also supports the ability to test compliance with switches, making your
testing faster, by ordering U7238C-7NL (Option 703 on new scope purchases). The
application is supported on all models.

For more information: www.keysight.com/find/d-phy_compliance

Automatically execute D-PHY electrical
checklist tests for CSI and DSI
architectures.
18 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Engineered for Unmatched Real-Time Measurement Accuracy (Continued)

Pass today’s demanding compliance tests more quickly (Continued)
10GBASE-T ethernet electrical conformance application for Infiniium
oscilloscopes (U7236A-1NL or Option 036 on new scope purchases)
Takes care of the tedious task of instrument control and configures the oscilloscope,
spectrum analyzer, or vector network analyzer as needed by each 10GBASE-T test to
provide rapid, accurate, and repeatable test execution.

The application is supported on all models.

For more information: www.keysight.com/find/10gbase-t

Automatically execute 10GBASE-T Ethernet

physical-layer (PHY) electrical tests.

USB 3.0/3.1 compliance test software (U7243B-3NL or Option 041

on new scope purchases
Provides industry leading automated test support for USB 3.0 products and displays
the test results in a comprehensive test report. For best measurement accuracy use the
Keysight U7243B USB 3.0 transmitter and receiver test fixtures. Keysight’s USB 3.0 test
solution is designed from the ground up with the needs of the test engineer in mind.

The application is supported on models ≥ 12 GHz.

For more information: www.keysight.com/find/USB3

Validate and debug your USB 3.0 silicon,
host, hub or device.

DDR1 and LPDDR/DDR2, LPDDR2/DDR3, DDR4 and GDDR5

compliance testing (Options 031/032/033/058 on new scope
purchases)
Quickly and easily evaluate and characterize your memory designs. Automated
testingbased on JEDEC specifications saves time. The application also includes
additional debug and compliance capabilities.

This application is supported on all models. However, the DDR technology you are using
may dictate the minimal bandwidth required for your scope.
Test DDR memory.
For more information: www.keysight.com/find/DDR

SD UHS-I and SD UHS-II card compliance testing

(U7246A-1NL/N6461A-1NL)
The SD card compliance test software gives you a fast, easy way to test, debug and
characterize your SD designs up to 1.5 Gb/s in accordance with the SD Specification.

The U7246A with 9000A and 90000A Series oscilloscopes is a certified test tool for SD
Card Phy electric tests with the SD Association. Reference is available in SDA official
document: SD Test Tool Information Ver1.0 Sep. 13, 2010.

For more information: www.keysight.com/find/U7246A Comprehensive analysis that automates the

complex measurements even when you are
www.keysight.com/find/N6461A not there.
19 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Keysight Infiniium Portfolio

Keysight’s Infiniium oscilloscope lineup includes bandwidths from 500 MHz to 63 GHz. Use the following selection guide to determine
which best matches your specific needs. Infiniium real-time oscilloscopes feature the following:
–– World’s highest bandwidth on 4 channels in a single frame
–– Industry’s lowest noise floor
–– Full PrecisionProbe compatibility

S-Series 90000A Series 90000 X-Series Z-Series

Available bandwidths Up to 4 GHz 500 MHz, 1 GHz, 2.5 GHz, 4 GHz
2.5 GHz, 4 GHz
6 to 16 GHz 6 GHz (2 ch), 8 GHz 6 GHz, 8 GHz, 13 GHz, 16 GHz
(2 ch) 12 GHz, 13 GHz
20 to 63 GHz 20 GHz, 25 GHz, 33 20 GHz, 25 GHz,
GHz 33 GHz, 50 GHz,
63 GHz
Max upgradable bandwidth 8 GHz 13 GHz 33 GHz 63 GHz
Sample rate (2-channel/4-channel) 10/20 GSa/s 40/40 GSa/s 80/40 GSa/s 160/80 GSa/s

Channel inputs and connector types 50 Ω and 1 MΩ, 50 Ω, BNCs 50 Ω, 2.92 and 3.5 mm 50 Ω, 1.85 mm,
BNCs SMAs 2.4 mm, 2.92 and
3.5 mm, SMAs
Memory depth (standard/max) 50 M/1 Gpts 20 M/2 Gpts 20 M/2 Gpts 50 M/2 Gpts
MSO models Yes No No No
Supported InfiniiMax probe families InfiniiMax 2 InfiniiMax 2 InfiniiMax 3 InfiniiMax InfiniiMax 3
2 with adapter InfiniiMax 2 with
adapter
20 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Infiniium 90000A Series

Starting with an 18-GHz, BNC-compatible connector, an ultra‑low noise floor front end
design using Faraday cage technology ensures high signal integrity in its signal path.

Click on the icon at the bottom left of the

Infiniium screen to minimize the status
and scales tab for full screen viewing.
Maximize your viewing needs.

Ever wanted to change the scale or offset

of a function or waveform memory? If you
have, you know that it requires multiple
menus and key strokes. In Infiniium
software version 2.01 and later, you
can now map functions and waveform
memories to the front panel controls of the
oscilloscope!
21 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

AutoProbe interface completely configures your scope for use with the InfiniiMax probing Simply press the horizontal delay knob
system and previous-generation Keysight active probes. to set the delay value to zero. A zoom
button provides quick access to two
screen zoom mode.

Dedicated single acquisition button

provide better control to capture an
unique event.

Customizable Multipurpose key gives

you any five automated measurements
with a push of a button. You can
also configure this key to execute a
script, print/save screen shots, save
waveforms, or load a favorite setup.

Measure section including a toggling

marker button and a dedicated marker
knob provides quick access to your
marker control.

Quick access to fine/vernier control

by pressing the horizontal and vertical
sensitivity knobs.

Increase your productivity with

a familiar Infiniium graphical
user interface, like your favorite
drag‑and‑drop measurement icons.
Infiniium’s analog-like front panel has
a full set of controls color coded to the
waveforms and measurements, making
your tasks simple.

Optional USB external DVD-RW drive

allows you to install your favorite
third‑party software conveniently and
can be used to back up your critical
measurement data.

Install third-party software packages

on Windows XP Pro operating system
such as Excel, LabVIEW, Keysight
VEE, MATLAB, anti-virus software,
and more, to perform customized
processing and automation of your
oscilloscope or to make the scope
compliant to the network environment
of your company.
22 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

InfiniiMax II: The World’s Best High-Speed Probing System Just Keeps Getting Better
InfiniiMax offers you the highest A flat frequency response
performance over the entire probe bandwidth eliminates
available for measuring differential the distortion and frequency‑dependent
and single‑ended signals, with flexible loading effects that are present in probes
connectivity solutions for today’s high- that have an in-band resonance.
density ICs and circuit boards.
E2695A 8-GHz differential SMA
InfiniiMax probes have fully probe head
characterized performance allows you to connect two SMA cables
for all of their various probe heads. This to make a differential measurement on a
includes: single scope channel.
–– Swept frequency response plot
–– Common mode rejection versus E2679A 6‑GHz extremely small
frequency plot single-ended, solder‑in probe
–– Impedance versus frequency plot
heads
–– Time-domain probe loading plot
–– Time-domain probe tracking plot for probing even the hardest‑to‑reach
single-ended signals.
Controlled impedance
transmission lines in every probe N5425A 13‑GHz high‑bandwidth
head deliver full performance solder‑in differential ZIF probe
head
versus the performance limitations
introduced by traditional wire accessories. and N5426A ZIF tip provides maximum
bandwidth with the industry’s first
Probe interface software lead-free solder-in probe solution in an
economical replaceable tip form factor.
allows you to save the calibration
information for up to 10 different probe
heads per channel and will automatically
N5451A 9‑GHz/5‑GHz
retrieve calibration data for a probe long-wire ZIF tip
amplifier when attached to the scope. provides a high‑bandwidth economical
replaceable solder-in tip with extra reach
High-input impedance active (9 GHz with 7 mm and 5 GHz with 11 mm
probes wire).

minimize loading, support differential

measurements and DC offset, and can
N5451A 9‑GHz/5‑GHz
compensate for cable loss. long-wire ZIF tip
provides a high‑bandwidth economical N5426A
Probe calibration software replaceable solder-in tip with extra reach
(9 GHz with 7 mm and 5 GHz with 11 mm
delivers the most accurate probe
wire).
measurements and linear phase response
and allows various probe combinations to
be deskewed to the same reference time. E2695A 8-GHz differential SMA
probe head
N5451A
allows you to connect two SMA cables
to make a differential measurement on a
single scope channel.
23 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Six different InfiniiMax probe amplifiers from 1.5 GHz to 13 GHz are available for
matching your probing solution to your performance and budget requirements. The
1168/69A InfiniiMax II amplifiers offer the highest bandwidth and the lowest noise floors.
The 1134/32/31/30A offer a more cost efficient solution and wider dynamic range.

N5382A 13‑GHz high‑bandwidth N2884A Differential Fine-wire

differential browser Probing Tip
provides maximum bandwidth for hand- InfiniiMax differential fine-wire probing tip
held or probe holder use. Variable spacing is a high fidelity, high bandwidth solution
from 0.2 to 3.3 mm (8 to 130 mills). for probing an active IC.

E2675A 6‑GHz differential

browser
is the best choice for general-purpose
trouble shooting of differential or single-
ended signals with z-axis compliance and
variable spacing from 0.25 to 5.80 mm
(10 to 230 mills).

E2676A 6‑GHz single-ended

browser
is the best choice for general-purpose N2887A InfiniiMax soft touch pro
probing of single-ended signals when the probe adapter
small size of the probe head is the primary
consideration. adapts from the Keysight pro series (36 ch)
soft touch connectorless logic analyzer foot
print to the Keysight InfiniiMax I & II series
E2678A 12‑GHz differential
probe amplifier input connectors.
socket probe head
can be used to measure either differential
or single‑ended signals via a plug-on
socket connection.

N2880A In-line attenuator kit

N5380B 13‑GHz high‑bandwidth allows you to increase the dynamic range
and the offset range of the InfiniiMax
differential SMA
probe without affecting the bandwidth.
probe head provides maximum bandwidth
for SMA‑fixtured differential pairs.

N5450B InfiniiMax extreme

temperature extension cable
provides extra reach into environmental N2888A InfiniiMax Soft touch
chambers. N2881A DC blocking capacitors half-channel probe adapter
can be used to in series with the N2880A adapts from the Keysight half-channel
InfiniiMax in-line attenuators to block out (18 ch) Soft touch connectorless logic
unwanted DC components of the input analyzer foot print to the Keysight
signal up to 30V. InfiniiMax I & II series probe amplifier input
connectors.
24 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Infiniium 90000A Series Oscilloscopes

Performance characteristics
Vertical
Input channels Four
Analog bandwidth (–3 dB) 1, 5 90254A 90404A 90604A 90804A 91204A 91304A
2.5 GHz 4 GHz 6 GHz 8 GHz 12 GHz 12 GHz
DSP enhanced bandwidth 4 91304A: 13-GHz real-time, user-selectable DSP enhanced bandwidth
Rise time/fall time 6 90254A 90404A 90604A 90804A 91204A 91304A
10 to 90% 140 ps 105 ps 70 ps 54 ps 35 ps 32 ps
20 to 80% 105 ps 79 ps 53 ps 38 ps 25 ps 23 ps
Input impedance 7 50 Ω, ± 3%
Sensitivity 2 1 mV/div to 1 V/div
Input coupling DC
Vertical resolution 3 8 bits, ≥ 12 bits with averaging
Channel to channel isolation (any two DC to 3 GHz: 90804A/91204A/91304A: 60 dB (≥ 1000:1)
channels with equal V/div settings 90254A/90404A/90604A: 50 dB (≥ 316:1)
3 to 8 GHz: 40 dB (≥ 100:1)
8 GHz to BW: 35 dB (≥ 56:1)
DC gain accuracy 1, 2 ± 2% of full scale at full resolution channel scale (± 2.5% for 5mV/div)
Maximum input voltage 1 ±5V
Offset range Vertical sensitivity Available offset
0 mV/div to ≥ 40 mV/div ± 0.4 V
> 40 mV/div to ≥ 75 mV/div ± 0.9 V
> 75 mV/div to ≥ 130 mV/div ± 1.6 V
> 130 mV/div to ≥ 240 mV/div ± 3.0 V
> 240 mV/div ± 4.0 V
Offset accuracy 1, 2 ≤ 3.5 V: ± (2% of channel offset + 1% of full scale) + 1 mV
> 3.5 V: ± (2% of channel offset + 1% of full scale)
Dynamic range ± 4 div from center screen
DC voltage measurement accuracy 1, 2 Dual cursor: ± [(DC gain accuracy) + (resolution)]
Single cursor: ± [(DC gain accuracy) + (offset accuracy) + (resolution/2)]
RMS noise floor (scope only)
Volts/div 90254A 90404A 90604A 90804A 91204A 91304A
5 mV 153 μV 199 μV 259 μV 322 μV 435 μV 467 μV
10 mV 183 μV 232 μV 295 μV 358 μV 483 μV 536 μV
20 mV 275 μV 342 μV 424 μV 498 μV 650 μV 758 μV
50 mV 645 μV 799 μV 985 μV 1.15 mV 1.45 mV 1.73 mV
100 mV 1.27 mV 1.56 mV 1.92 mV 2.22 mV 2.80 mV 3.37 mV
200 mV 2.47 mV 3.03 mV 3.71 mV 4.28 mV 5.41 mV 6.58 mV
500 mV 6.48 mV 8.00 mV 9.91 mV 11.5 mV 14.7 mV 17.4 mV
1V 12.5 mV 15.6 mV 19.2 mV 22.3 mV 28.5 mV 34.1 mV
1. Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period, and ± 5 °C from annual calibration
temperature.
2. Full scale is defined as 8 vertical divisions. Magnification is used below 5 mV/div. Below 5 mV/div, full-scale is defined as 40 mV. The major scale settings are
5 mV, 10 mV, 20 mV, 50 mV, 100 mV, 200 mV, 500 mV, 1 V.
3. Vertical resolution for 8 bits = 0.4% of full scale, for 12 bits = 0.024% of full scale.
4. 13 GHz DSP enhanced bandwidth not applicable at 5 mV/div.
5. FFT amplitude readings are affected by scope and probe bandwidth limitations and input amplifiers roll-off (e.g. 3 dB roll-off at specified bandwidth of
scope/probe).
6. The FFT signal to noise ratio varies with volts/division setting, memory depth and use of time or frequency averaging.
7a. Noise is the displayed noise floor. SlewRate is the displayed slew rate of the signal at the threshold crossings. Sample rate = max, sin(x)/x interpolation
enabled.
7b. Measurement threshold = fixed voltage at 50% level.
7c. Time ranges ≤ 10 μs.
8. Values represent time error between two edges on a single channel. Standard deviation value refers to the standard deviation of 256 consecutive
measurements performed using an individual instrument. Reading is the displayed DTMA measurement value. TimeScaleAccy is the oscilloscope’s specified
time scale accuracy.
9. Internal edge trigger mode. Trigger threshold = fixed voltage at 50% level. The slew rate independent value in the formula represents the traditional trigger
jitter.
10. Requires Option 010 user defined function.
11. 11.8 GHz analog bandwidth at 5 mV/div for DSO91304A and DSO91204A models.
12. Typically triggers as low as 5 mV/div sensitivity.
25 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Infiniium 90000A Series Oscilloscopes (Continued)

Performance characteristics (Continued)
Vertical (Continued)
RMS noise floor (scope with probe)
Volts/div 90254A with 90404A with 90604A with 90804A with 91204A with 91304A with
1131A 1132A 1134A 1168A 1169A 1169A
20 mV 3.2 mV 3.5 mV 4.0 mV 2.2 mV 2.5 mV 2.7 mV
50 mV 3.3 mV 3.6 mV 4.0 mV 2.3 mV 2.8 mV 3.1 mV
100 mV 3.4 mV 3.8 mV 4.3 mV 2.9 mV 3.5 mV 4.2 mV
200 mV 4.0 mV 4.6 mV 5.3 mV 4.7 mV 5.9 mV 7.5 mV
500 mV 7.1 mV 8.6 mV 10 mV 12 mV 15 mV 19 mV
1V 13 mV 16 mV 19 mV 23 mV 28 mV 37 mV
Horizontal
Main timebase range 5 ps/div to 200 s/div real-time
Main timebase delay range –200 s to 200 s real-time
Zoom timebase range 1 ps/div to current main time scale setting
Time scale accuracy 1, 8 ± (0.4 ppm initial + 0.5 ppm/year aging)
Oscilloscope channel de-skew range ± 25 µs range, 100 fs resolution
Intrinsic jitter 6 (sample clock jitter) Acquired time range or delta-time Internal reference External reference
delta-time Interval
< 100 µs (10 µs/div) 0.5 ps rms 0.5 ps rms
1 ms (100 µs/div) 1.0 ps rms 1.0 ps rms
10 ms (1 ms/div) 1.2 ps rms 1.2 ps rms
100 ms (10 ms/div) 5.0 ps rms 1.2 ps rms
Inter-channel intrinsic jitter 3 550 fs rms
Inter-channel skew drift 3, 7 < 500 fs rms
Jitter measurement floor 2
Time interval error 2
 NoiseFloor 
 + ( Intrinsic Jitter)
2

 SlewRate 
Period jitter 2
 NoiseFloor 
 + ( Intrinsic Jitter )
2
2i 
 SlewRate 
Cycle-cycle/N-cycle jitter 2
 NoiseFloor 
 + ( Intrinsic Jitter )
2
3i 
 SlewRate 
Inter-channel jitter measurement floor 2, 3, 5 2 2 2
 TimeInterval  Time Interval   Interchannel
 Error Edge1  +  Error Edge 2  + 
 ( )  ( )   IntrinsicJitter
1.  Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ± 5 °C from firmware calibration
temperature.
2.  Sample rate at maximum. Noise and slew rate determined at fixed-voltage measurement threshold, near middle of signal. Displayed signal not vertically
clipped. Slew rate of sine wave = (peak signal amplitude) • 2 • π • f, slew rate of fast step ~= (10 to 90% rise time).
3.  Intra-channel = both edges on the same channel, inter-channel = two edges on different channels. Time Interval Error(Edge1) = time-interval error
measurement floor of first edge, time interval error(Edge2) = time-interval error measurement floor of second edge.
4.  Reading is the displayed delta time measurement accuracy measurement value. Do not double the listed time scale accuracy value in delta time
measurement accuracy formula.
5.  Scope channels and signal interconnect de-skewed prior to measurement.
6.  External timebase reference values measured using a Wenzel 501-04608A 10 MHz reference. Intrinsic jitter value depends on acquisition time range for
Time Interval Error formula and depends on delta-time between edges for all two-edge formulas.
7.  Skew between channels caused by ± 5 ºC temperature change.
8.  Initial = immediately after factory or user calibration.
26 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Infiniium 90000A Series Oscilloscopes (Continued)

Performance characteristics (Continued)
Horizontal (Continued)
Delta time measurement accuracy 2, 3, 4, 5
Intra-channel
No averaging
  TimeInterval 2  Time Interval  2  TimeScale Delta   
    
± 5 i   +  +  i 
  Error (Edge1)   Error (Edge 2)    Accuracy   Time   

 
256 averages
 2 2 
 5  TimeInterval  Time Interval    TimeScale  Delta   
± i   +  +  i 
16  Error (Edge1)   Error (Edge 2)    Accuracy   Time   
 
Inter-channel
No averaging
  TimeInterval2  Time Interval  2 Interchannel 
2
5 i  
 +  + 
  Error (Edge1)   Error (Edge 2)   IntrinsicJitter 
± 
   TimeScale  Delta   Inter channel
  
 +    i  +  
   Accuracy   Time    SkewDrift  
256 averages
 2 2 
 5  TimeInterval  Time Interval  
i   +  +
 16  Error (Edge1)   Error (Edge 2)  
± 
   Time    Delta
 Scale     Inter channel  
 +  Accuracy i +
     Time    Skew  Drift  

1.  Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ± 5 °C from firmware calibration
temperature.
2.  Sample rate at maximum. Noise and slew rate determined at fixed-voltage measurement threshold, near middle of signal. Displayed signal not vertically
clipped. Slew rate of sine wave = (peak signal amplitude) • 2 • π • f, slew rate of fast step ~= (10 to 90% rise time).
3.  Intra-channel = both edges on the same channel, inter-channel = two edges on different channels. Time Interval Error(Edge1) = time-interval error
measurement floor of first edge, time interval error(Edge2) = time-interval error measurement floor of second edge.
4.  Reading is the displayed delta time measurement accuracy measurement value. Do not double the listed time scale accuracy value in delta time
measurement accuracy formula.
5.  Scope channels and signal interconnect de-skewed prior to measurement.
6.  External timebase reference values measured using a Wenzel 501-04608A 10 MHz reference. Intrinsic jitter value depends on acquisition time range for
Time Interval Error formula and depends on delta-time between edges for all two-edge formulas.
7.  Skew between channels caused by ± 5 ºC temperature change.
8.  Initial = immediately after factory or user calibration.
27 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Infiniium 90000A Series Oscilloscopes (Continued)

Performance characteristics (Continued)
Acquisition
Maximum real-time sample rate 91304A/91204A/90804A: 40 GSa/s (4 channels simultaneously)
90604A/90404A/90254A: 20 GSa/s (4 channels simultaneously)
Maximum acquired time at highest 91304A/91204A/90804A 90604A/90404A/90254A
real-time resolution
Resolution 25 ps (40 GSa/s) 50 ps (20 GSa/s)
Standard 0.5 ms 1.0 ms
Option 50M 1.25 ms 2.5 ms
Option 100 2.5 ms 5.0 ms
Option 200 5.0 ms 10.0 ms
Option 500 12.5 ms 25.0 ms
Option 01G 25.0 ms 50.0 ms
Option 02G 50.0 ms 100.0 ms
Data transfer speed
Gigabit Ethernet Samples: 1k 64 k 1M 16 M 32 M 128 M
MSa/s (Word): 0.1 1.88 9.25 12.00 12.80 12.80
MSa/s (Byte): 0.11 1.88 12.60 19.70 20.30 22.00
USB 2.0 hi-speed (device) Samples: 1k 64 k 1M 16 M 32 M 128 M
MSa/s (Word): 0.11 1.88 8.34 8.55 9.07 11.38
MSa/s (Byte): 0.11 1.88 11.60 14.40 14.90 18.10
Sampling modes
Real-time Successive single-shot acquisitions
Real-time with averaging Selectable from 2 to 65534
Real-time with peak detect 91304A/91204A/90804A: 40 GSa/s
90604A/90404A/90254A: 20 GSa/s
Real-time with hi resolution Real-time boxcar averaging reduces random noise and increases resolution
Equivalent-time Resolution: 338 fs
Full bandwidth on all 4 channels, 262,144 sample points maximum memory
Segmented memory Captures bursting signals at maximum sample rate without consuming memory during periods of inactivity
Minimum intersegment time:
91304A / 91204A / 90804A: 2.7 μs
90604A / 90404A / 90254A: 2.5 μs
(the time between the end of the previous acquisition and the beginning of the next acquisition)
Memory depth: 20 M 50 M 100 M 200 M 500 M 1G 2G
Max # of segments: 4096 8192 16384 32768 65536 131072 131072
Roll mode Scrolls sequential waveform points across the display in a right-to-left rolling motion. Works at sample rates up to
10 MSa/s with a maximum record length of 40MS.
Filters On/off selectable FIR digital filter. Digital signal processing adds points between acquired data points to enhance
Sin(x)/x Interpolation measurement accuracy and waveform display quality.
28 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Infiniium 90000A Series Oscilloscopes (Continued)

Performance characteristics (Continued)
Hardware trigger
Sensitivity 2 91304A/91204A/90804A: Internal low 2: 2.0 div p-p 0 to 5 GHz
Internal high 2: 0.3 div p-p 0 to 4 GHz, 1.0 div p-p 4 to 7.5 GHz
90604A/90404A/90254A 12: Internal low 2: 2.0 div p-p 0 to 5 GHz
Internal high 2: 0.3 div p-p 0 to 3 GHz, 1.0 div p-p 3 to 5 GHz
Auxiliary: DC to 100 MHz: 200 mV p-p into 50 Ω
100 MHz to 1 GHz: 500 mV p-p into 50 Ω
Level range
Internal ± 4 div from center screen or ± 4 Volts, whichever is smallest
Auxiliary ± 5 V, also limit input signal to ± 5 V
Sweep modes Auto, triggered, single
Display jitter (trigger jitter) 2, 3, 4 620 fs rms
Trigger sources Channel 1, channel 2, channel 3, channel 4, aux, and line
Trigger modes
Edge Triggers on a specified slope (rising, falling or alternating between rising and falling) and voltage level on any channel
or auxiliary trigger.
Edge transition Trigger on rising or falling edges that cross two voltage levels in > or < the amount of time specified. Edge transition
setting from 250 ps.
Edge then edge (time) The trigger is qualified by an edge. After a specified time delay between 10 ns to 10 s, a rising or falling edge on any
one selected input will generate the trigger.
Edge then edge (event) The trigger is qualified by an edge. After a specified delay between 1 to 16,000,000 rising or falling edges, another
rising or falling edge on any one selected input will generate the trigger.
Glitch Triggers on glitches narrower than the other pulses in your waveform by specifying a width less than your narrowest
pulse and a polarity. Triggers on glitches as narrow as 125 ps. Glitch range settings: < 250 ps to < 10 s.
Line Triggers on the line voltage powering the oscilloscope.
Pulse width Trigger on a pulse that is wider or narrower than the other pulses in your waveform by specifying a pulse width and a
polarity. Triggers on pulse widths as narrow as 125 ps. Pulse width range settings: 250 ps to 10 s. Trigger point can
be “end of pulse” or “time out”.
Runt Triggers on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again.
Can be time qualified with minimum setting of 250 ps.
Timeout Trigger when a channel stays high, low, or unchanged for too long. Timeout setting: from 250 ps to 10 s.
Pattern/pulse range Triggers when a specified logical combination of the channels is entered, exited, present for a specified period of time
or is within a specified time range or times out. Each channel can have a value of High (H), Low (L) or Don’t care (X).
State Pattern trigger clocked by the rising, falling or alternating between rising and falling edge of one channel.
Setup/hold Triggers on setup, hold, or setup and hold violations in your circuit. Requires a clock and data signal on any two inputs
(except aux or line) channels as trigger sources. Setup and/or hold time must then be specified.

1.  Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and ± 5 °C from firmware calibration
temperature.
2.  Internal edge trigger mode with JitterFree correction. Value depends on scope settings and trigger signal characteristics, and is equal to TIE value
expressed in the formula above using the minimum time scale accuracy value.
3.  Value shown represents typical Display jitter for 91204A at 100 mV/div triggering on 500 mVpp 6 GHz sin wave signal.
4.  Sample rate at maximum. Noise and slew rate determined at fixed-voltage trigger threshold, near middle of signal. Displayed signal not vertically clipped.
29 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Infiniium 90000A Series Oscilloscopes (Continued)

Performance characteristics (Continued)
Hardware trigger (Continued)
Trigger modes (Continued)
Window Triggers on an event associated with a window defined by two-user adjustable thresholds. Event can be window
“entered,” “exited,” “inside (time qualified),” or “outside (time qualified)” voltage range. Trigger point can be “cross
window boundary” or “time out.” Time qualify range: from 250 ps to 10 s.
Video Triggers from negative sync composite video, field 1, field 2, or alternating fields for interlaced systems, any
field, specific line, or any line for interlaced or non-interlaced systems. Supports NTSC, PAL-M (525/60), PAL,
SECAM (625/50), EDTV (480p/60), EDTV (576p/50), HDTV (720p/60), HDTV (720p/50), HDTV (1080i/60), HDTV
(1080i/50), HDTV (1080p/60), HDTV (1080p/50), HDTV (1080p/30), HDTV (1080p/25), HDTV (1080p/24), and
user-defined formats.
Trigger sequences Three stage trigger sequences including two‑stage hardware (Find event (A) and Trigger event (B)) and one‑stage
InfiniiScan software trigger. Supports all hardware trigger modes except “edge then edge” and “video,” and
all InfiniiScan software trigger modes. Supports “delay (by time)” and “reset (by time or event)” between two
hardware sequences. The minimum latency between “find event (A)” and “trigger event (B)” is 3 ns.
Trigger qualification and qualifier Single or multiple channels may be logically qualified with any other trigger mode
Trigger holdoff range 100 ns to 10 s
Trigger actions Specify an action to occur and the frequency of the action when a trigger condition occurs. Actions include e-mail
on trigger and execute “multipurpose” user setting.
Trigger shortcuts Provides easy shortcuts to all trigger features
Software trigger (requires InfiniiScan event identification software — Option 009)
Trigger modes
Generic serial Software triggers on NRZ-encoded data up to 8.0 Gbps, up to 80‑bit pattern. Support multiple clock data
recovery methods including constant frequency, 1st‑order PLL, 2nd-order PLL, explicit clock, explicit 1st-order
PLL, explicit 2nd-order PLL, Fibre Channel, FlexRay receiver, FlexRay transmitter (requires E2688A except for the
constant frequency clock data recovery mode).
Measurement limit Software triggers on the results of the measurement values. For example, when the “pulse width” measurement
is turned on, InfiniiScan measurement software trigger triggers on a glitch as narrow as 75 ps. When the “time
interval error (TIE)” is measured, InfiniiScan can trigger on a specific TIE value.
Non-monotonic edge Software triggers on the non-monotonic edge. The non-monotonic edge is specified by setting a hysteresis value.
Runt Software triggers on a pulse that crosses one threshold but fails to cross a second threshold before crossing the
first again. Unlike hardware runt trigger, InfiniiScan runt trigger can be further qualified via a hysteresis value.
Zone qualify Software triggers on the user defined zones on screen. Zones can be specified as either “must intersect” or “must
not intersect.” Up to four zones can be defined.
30 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Infiniium 90000A Series Oscilloscopes (Continued)

Performance characteristics (Continued)
Measurements and math
Maximum measurement update > 42,000 measurement/sec (one measurement turned on)
rate > 122,000 measurement/sec/measurement (five measurements turned on)
Measurement modes Standard, Measure All edges mode
Waveform measurements
Voltage Peak to peak, minimum, maximum, average, RMS, amplitude, base, top, overshoot, preshoot, upper, middle, lower
Time Rise time, fall time, period, frequency, positive width, negative width, duty cycle, burst width, Tmin, Tmax, Tvolt,
setup time (requires Option 002, 004, or 070 standard on DSA models), hold time (requires Option 002, 004, or 070
standard on DSA models), channel-to-channel delta time, channel‑to-channel phase
Mixed Area, slew rate
Frequency domain FFT frequency, FFT magnitude, FFT delta frequency, FFT delta magnitude
Level qualification Any channels that are not involved in a measurement can be used to level-qualify all timing measurements
Eye-diagram measurements Eye height, eye width, eye jitter, crossing percentage, Q factor, and duty-cycle distortion
Jitter analysis measurements Fast eye rendering increases speed of the eye diagram rendering
Clock Requires Option 002 (or E2681A), 004 (or N5400A), or 070 (or N8823A). Standard on DSA Series.
Data Time interval error (TIE) data with TIE band, high, low-pass filter, data rate, unit interval, clock recovery rate, burst
time, burst period, burst interval
Timing Two sources: Setup time, hold time, phase, advanced
One source: Period, frequency, + width, width, duty cycle, burst width, rise time, fall time, slew rate
Statistics Displays the current, mean, minimum, maximum, range (max-min), standard deviation, number of measurements
value for the displayed automatic measurements
Histograms
Source Waveform or measurement 13
Orientation Vertical (for timing and jitter measurements) or horizontal (noise and amplitude change) modes, regions are defined
using waveform markers
Measurements Mean, standard deviation, mean ± 1, 2, and 3 sigma, median, mode, peak-to-peak, min, max, total hits, peak (area of
most hits), X scale hits, and X offset hits

1. Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period, and ± 5 °C from annual calibration
temperature.
2. Full scale is defined as 8 vertical divisions. Magnification is used below 5 mV/div. Below 5 mV/div, full-scale is defined as 40 mV. The major scale settings are
5 mV, 10 mV, 20 mV, 50 mV, 100 mV, 200 mV, 500 mV, 1 V.
3. Vertical resolution for 8 bits = 0.4% of full scale, for 12 bits = 0.024% of full scale.
4. 13 GHz DSP enhanced bandwidth not applicable at 5 mV/div.
5. FFT amplitude readings are affected by scope and probe bandwidth limitations and input amplifiers roll-off (e.g. 3 dB roll-off at specified bandwidth of scope/probe).
6. The FFT signal to noise ratio varies with volts/division setting, memory depth and use of time or frequency averaging.
7a. Noise is the displayed noise floor. SlewRate is the displayed slew rate of the signal at the threshold crossings. Sample rate = max, sin(x)/x interpolation
enabled.
7b. Measurement threshold = fixed voltage at 50% level.
7c. Time ranges ≤ 10 μs.
8. Values represent time error between two edges on a single channel. Standard deviation value refers to the standard deviation of 256 consecutive
measurements performed using an individual instrument. Reading is the displayed DTMA measurement value. TimeScaleAccy is the oscilloscope’s specified
time scale accuracy.
9. Internal edge trigger mode. Trigger threshold = fixed voltage at 50% level. The slew rate independent value in the formula represents the traditional trigger
jitter.
10. Requires Option 010 user defined function.
11. 11.8 GHz analog bandwidth at 5 mV/div for DSO91304A and DSO91204A models.
12. Typically triggers as low as 5 mV/div sensitivity.
13. Measurement histograms require EZJIT license.
31 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Infiniium 90000A Series Oscilloscopes (Continued)

Performance characteristics (Continued)
Measurements and math (Continued)
Mask testing Allows pass/fail testing to user-defined or Keysight-supplied waveform templates. Automask lets you create a mask
template from a captured waveform and define a tolerance range in time/voltage or screen divisions. Test modes
(run until) include test forever, test to specified time or event limit, and stop on failure. Executes “multipurpose”
user setting on failure. “Unfold real time eye” feature will allow individual bit errors to be observed by unfolding a
real time eye when clock recovery is on. Communications mask test kit option provides a set of ITU-T G.703, ANSI
T1.102, and IEEE 802.3 industry-standard masks for compliance testing.
Waveform math
Number of functions 16
Hardware accelerated math Differential and common mode
Operators Absolute value, add, amplitude modulation, average, Butterworth 10, common mode, delay, differentiate, divide, FFT
magnitude, FFT phase, FIR 10, high pass filter, histogram (measurement), horizontal gate, integrate, invert,
LFE 10, low pass filter (4th‑order Bessel Thompson filter), magnify, max, measurement trend, min, multiply, RT Eye 10,
smoothing, SqrtSumOfSquare 10, square, square root, subtract, versus, and optional user defined function (Option
010)
FFT
Frequency range 5 DC up to 20 GHz (at 40 GSa/s) or 10 GHz (at 20 GSa/s)
Frequency resolution Sample rate/memory depth = resolution
Best resolution at 91304A/91204A/90804A: 800 Hz
maximum sample rate 90604A/90404A/90254A: 400 Hz
Frequency accuracy (1/2 frequency resolution) + (1 x 10-6)(signal frequency)

1. Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period, and ± 5 °C from annual calibration
temperature.
2. Full scale is defined as 8 vertical divisions. Magnification is used below 5 mV/div. Below 5 mV/div, full-scale is defined as 40 mV. The major scale settings are
5 mV, 10 mV, 20 mV, 50 mV, 100 mV, 200 mV, 500 mV, 1 V.
3. Vertical resolution for 8 bits = 0.4% of full scale, for 12 bits = 0.024% of full scale.
4. 13 GHz DSP enhanced bandwidth not applicable at 5 mV/div.
5. FFT amplitude readings are affected by scope and probe bandwidth limitations and input amplifiers roll-off (e.g. 3 dB roll-off at specified bandwidth of scope/probe).
6. The FFT signal to noise ratio varies with volts/division setting, memory depth and use of time or frequency averaging.
7a. Noise is the displayed noise floor. SlewRate is the displayed slew rate of the signal at the threshold crossings. Sample rate = max, sin(x)/x interpolation
enabled.
7b. Measurement threshold = fixed voltage at 50% level.
7c. Time ranges ≤ 10 μs.
8. Values represent time error between two edges on a single channel. Standard deviation value refers to the standard deviation of 256 consecutive
measurements performed using an individual instrument. Reading is the displayed DTMA measurement value. TimeScaleAccy is the oscilloscope’s specified
time scale accuracy.
9. Internal edge trigger mode. Trigger threshold = fixed voltage at 50% level. The slew rate independent value in the formula represents the traditional trigger
jitter.
10. Requires Option 010 user defined function.
11. 11.8 GHz analog bandwidth at 5 mV/div for DSO91304A and DSO91204A models.
12. Typically triggers as low as 5 mV/div sensitivity.
13. Measurement histograms require EZJIT license.
32 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Infiniium 90000A Series Oscilloscopes (Continued)

Performance characteristics (Continued)
Measurements and math (Continued)
FFT (Continued)
Signal-to-noise ratio 6 60 dB to > 100 dB depending on settings
Window modes Hanning, flattop, rectangular, Blackman-Harris
Measurement modes
Automatic measurements Measure menu access to all measurements, ten measurements can be displayed simultaneously
Multipurpose Front-panel button activates ten pre-selected or ten user-defined automatic measurements
Drag-and-drop measurement Measurement toolbar with common measurement icons that can be dragged and dropped onto the displayed
toolbar waveforms
Snapshot Takes 29 snap shot measurements (customizable)
Marker modes Manual markers, track waveform data, track measurements
Display
Display 12.1‑inch color XGA TFT-LCD with touch screen
Intensity grayscale 256‑level intensity‑graded display
Resolution XGA 1024 pixels horizontally x 768 pixels vertically
Annotation Up to 12 labels, with up to 100 characters each, can be inserted into the waveform area
Grids Up to 16 grids each with 8 bit vertical resolution
Waveform styles Connected dots, dots, infinite persistence, color graded infinite persistence. Includes up to 256 levels of
intensity‑graded waveforms.
Waveform update rate
Maximum waveform update > 400,000 waveforms per second (when in the segment memory mode)
Computer system and peripherals, I/O ports
Computer system and peripherals
Operating system Windows 7 Embedded Standard
CPU Intel Core 2 Duo 3.06 GHz
PC system memory 4 GB DDR2 (standard)
Drives ≥ 250‑GB internal hard drive
Optional removable hard drive (Option 801)
Optional USB external DVD-RW drive (Option 820)
Peripherals Logitech optical USB mouse, compact USB keyboard and stylus supplied. All Infiniium models support any
Windows-compatible input device with a serial, PS/2 or USB interface.
File types
Waveforms (supported max Compressed internal format (*.wfm (200 Mpts)), comma‑separated values (*.csv (1 Gpts)), tab separated values
memory size) (*.tsv (1 Gpts)), public binary format (.bin (500 Mpts)), Y value files (*.txt (1 Gpts)), hierarchal data file (*.hf5(1
Gpts)),
Images BMP, PNG, TIFF, GIF or JPEG
I/O ports
LAN RJ-45 connector, supports 10Base-T, 100Base-T, and 1000Base-T. Enables Web-enabled remote control, e-mail
on trigger or demand, data/file transfers and network printing (VXI-11). Recommended Web remote control tool:
Ultra VNC (http://www.ultravnc.com/).

1.  Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period, and ± 5 °C from annual calibration
temperature.
2.  Full scale is defined as 8 vertical divisions. Magnification is used below 5 mV/div. Below 5 mV/div, full-scale is defined as 40 mV. The major scale settings are
5 mV, 10 mV, 20 mV, 50 mV, 100 mV, 200 mV, 500 mV, 1 V.
3.  Vertical resolution for 8 bits = 0.4% of full scale, for 12 bits = 0.024% of full scale.
4.  13 GHz DSP enhanced bandwidth not applicable at 5 mV/div.
5.  FFT amplitude readings are affected by scope and probe bandwidth limitations and input amplifiers roll-off (e.g. 3 dB roll-off at specified bandwidth of
scope/probe).
6.  The FFT signal to noise ratio varies with volts/division setting, memory depth and use of time or frequency averaging.
33 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Infiniium 90000A Series Oscilloscopes (Continued)

Performance characteristics (Continued)
Computer system and peripherals, I/O ports (Continued)
I/O ports (Continued)
PCI EXPRESS PCI EXPRESS x4 link, enabled by sockets (optional- Option 823)
GPIB IEEE 488.2, fully programmable (optional – Option 805)
RS-232 (serial) COM1, printer and pointing device support
Parallel Centronics printer port
PS/2 Two ports. Supports PS/2 pointing and input devices.
USB 2.0 hi-speed (host) Three USB 2.0 hi-speed host ports on front panel plus four USB 2.0 Hi-Speed host ports on rear panel
USB 2.0 hi-speed (device) One USB 2.0 hi-speed device port on rear panel that enables USB instrument control
Dual-monitor video output 15 pin XGA (1024x768), full color output of scope waveform display or dual monitor video output
Auxiliary output DC (± 2.4 V); square wave (~715 Hz and ~456 MHz); trigger output (255 mV p-p into 50)
Trigger output 5 V 50 Ω back-terminated
Time base reference output 10 MHz filtered sine wave with all harmonics ≤ –40 dBc. Amplitude into 50 Ω: 800 mV p-p to 1.26 V p-p (4 dBm
± 2 dB) if derived from internal reference. Tracks external reference input amplitude ± 1 dB if applied and selected.
Time base reference input Must be 10 MHz, input Z0 = 50 Ω. Minimum 500 mV p-p (–2 dBm), maximum 2.0 V p-p (+10 dBm).
LXI compliance Functional Class C
General characteristics
Temperature Operating: 5 °C to +40 °C; Non-operating: –40 °C to +65 °C
Humidity Operating: up to 95% relative humidity (non-condensing) at +40 °C; Non-operating: up to 90% relative humidity at
+65 °C
Altitude Operating: up to 4,000 meters (12,000 feet); Non-operating: up to 15,300 meters (50,000 feet)
Vibration Operating random 0.21 g(rms), non-operating random 2.0 g(rms), swept sins (0.50 g(rms))
Power 100 to 240 VAC at 50/60 Hz; maximum input power 800 W
Weight Net: 20 kg (44 lbs.)
Shipping: 27.4 kg (60 lbs.)
Dimensions (excluding handle) Height: 283 mm (11.13 inch); Width: 432 mm (17.02 inch); Depth: 506 mm (19.91 inch)
Safety Meets IEC 61010-1 +A2, CSA certified to C22.2 No.1010.1, self-certified to UL 3111

1. Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period, and ± 5 °C from annual calibration
temperature.
2. Full scale is defined as 8 vertical divisions. Magnification is used below 5 mV/div. Below 5 mV/div, full-scale is defined as 40 mV. The major scale settings are
5 mV, 10 mV, 20 mV, 50 mV, 100 mV, 200 mV, 500 mV, 1 V.
3. Vertical resolution for 8 bits = 0.4% of full scale, for 12 bits = 0.024% of full scale.
4. 13 GHz DSP enhanced bandwidth not applicable at 5 mV/div.
5. FFT amplitude readings are affected by scope and probe bandwidth limitations and input amplifiers roll-off (e.g. 3 dB roll-off at specified bandwidth of
scope/probe).
6. The FFT signal to noise ratio varies with volts/division setting, memory depth and use of time or frequency averaging.
7a. Noise is the displayed noise floor. SlewRate is the displayed slew rate of the signal at the threshold crossings. Sample rate = max, sin(x)/x interpolation
enabled.
7b. Measurement threshold = fixed voltage at 50% level.
7c. Time ranges ≤ 10 µs.
8. Values represent time error between two edges on a single channel. Standard deviation value refers to the standard deviation of 256 consecutive
measurements performed using an individual instrument. Reading is the displayed DTMA measurement value. TimeScaleAccy is the oscilloscope’s specified
time scale accuracy.
9. Internal edge trigger mode. Trigger threshold = fixed voltage at 50% level. The slew rate independent value in the formula represents the traditional trigger
jitter.
10. Requires Option 010 user defined function.
11. 11.8 GHz analog bandwidth at 5 mV/div for DSO91304A and DSO91204A models.
12. Typically triggers as low as 5 mV/div sensitivity.
13. Measurement histograms require EZJIT license.
34 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

InfiniiMax II Series
Performance characteristics
1169A, 1168A
Bandwidth 1 1169A: > 12 GHz (13 GHz typical) 1168A: > 10 GHz
Rise and fall time
Probe only 1169A: 28 ps (20 to 80%), 40 ps (10 to 90%) 1168A: 34 ps (20 to 80%), 48 ps (10 to 90%)
When phase compensated by 1169A with 91204A: 25 ps (20 to 80%) 1168A with 90804A: 38 ps (20 to 80%)
36 ps (10 to 90%) 54 ps (10 to 90%)
90000A Series oscilloscope 1169A with 91304A: 23 ps (20 to 80%)
33 ps (10 to 90%)
System bandwidth (–3 dB) 1169A with 91304A: 13 GHz (typical) 1168A with 90804A: 8 GHz
1169A with 91204A: 12 GHz
Input capacitance 2 Cm = 0.09 pF Cm is between tips
Cg = 0.26 pF Cg is to ground for each tip
Cdiff = 0.21 pF Differential mode capacitance = Cm + Cg/2
Cse = 0.35 pF Single-ended mode capacitance = Cm + Cg
Input resistance 1 Differential mode resistance = 50 kΩ ± 2%
Single-ended mode resistance = 25 kΩ ± 2%
Input dynamic range 3.3 V peak to peak, ± 1.65 V
Input common mode range 6.75 V peak to peak dc to 100 Hz; 1.25 V peak to peak > 100 Hz
Maximum signal slew rate 25 V/ns when probing a single-ended signal
40 V/ns when probing a differential signal
DC attenuation 3.45:1
Zero offset error referred to input ± 1.5 mV
Offset range ± 16.0 V when probing single-ended
Offset gain accuracy < ± 1% of setting when probing single-ended
Noise referred to input 2.5 mV rms, probe only
Propagation delay ~6 ns (this delay can be deskewed relative to other signals)
Maximum input voltage 30 V peak, CAT I
ESD tolerance > 8 kV from 100 pF, 300 Ω HBM
Temperature Operating: 5 °C to +40 °C
Non-operating: 0 °C to +70 °C

1.  Denotes warranted specifications, all others are typical.

2.  Measured using the probe amplifier and N5381A solder-in differential probe head.
35 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

InfiniiMax II Series (Continued)

Performance characteristics
1134A, 1132A, 1131A, 1130A
Bandwidth 1 1134A: > 7 GHz 1131A: > 3.5 GHz
1132A: > 5 GHz 1130A: > 1.5 GHz
Rise and fall time (10% to 90%) 1134A: 60 ps 1131A: 100 ps
1132A: 86 ps 1130A: 233 ps
System bandwidth (–3 dB) 1134A with 90604A: 6 GHz
1132A with 90404A: 4 GHz
1131A with 90254A: 2.5 GHz
Input capacitance 2 Cm = 0.10 pF Cm is between tips
Cg = 0.34 pF Cg is to ground for each tip
Cdiff = 0.27 pF Differential mode capacitance = Cm + Cg/2
Cse = 0.44 pF Single-ended mode capacitance = Cm + Cg
Input resistance 1 Differential mode resistance = 50 kΩ ± 2%
Single-ended mode resistance = 25 kΩ ± 2%
Input dynamic range 5.0 V peak to peak, ± 2.5 V
Input common mode range 6.75 V peak to peak dc to 100 Hz; 1.25 V peak to peak > 100 Hz
Maximum signal slew rate 18 V/ns when probing a single-ended signal
30 V/ns when probing a differential signal
DC attenuation 10:1 ± 3% before calibration on oscilloscope
10:1 ± 1% after calibration on oscilloscope
Zero offset error referred to input < 30 mV before calibration on oscilloscope
< 5 mV after calibration on oscilloscope
Offset range ± 12.0 V when probing single-ended
Offset accuracy < ± 1% of setting when probing single-ended
Noise referred to input 3.0 mV rms
Propagation delay ~6 ns (this delay can be deskewed relative to other signals)
Maximum input voltage 30 V peak, CAT I
ESD tolerance > 8 kV from 100 pF, 300 Ω HBM
Temperature Operating: 5 °C to +40 °C
Non-operating: 0 °C to +70 °C

1.  Denotes warranted specifications, all others are typical.

2.  Measured using the probe amplifier and N5381A solder-in differential probe head.
36 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Infiniium 90000 Series Ordering Information

Infiniium DSA/DSO90000A Series oscilloscopes
Model Bandwidth Channels Sample rate Standard memory per channel
DSA/DSO91304A 13 GHz 4 40 GSa/s 20 Mpts/50 Mpts (DSA)
DSA/DSO91204A 12 GHz 4 40 GSa/s 20 Mpts/50 Mpts (DSA)
DSA/DSO90804A 8 GHz 4 40 GSa/s 20 Mpts/50 Mpts (DSA)
DSA/DSO90604A 6 GHz 4 20 GSa/s 20 Mpts/50 Mpts (DSA)
DSA/DSO90404A 4 GHz 4 20 GSa/s 20 Mpts/50 Mpts (DSA)
DSA/DSO90254A 2.5 GHz 4 20 GSa/s 20 Mpts/50 Mpts (DSA)

DSA Series comes with standard 50 Mpts memory, high speed serial data analysis
(Option 003/E2688A), EZJIT Complete jitter analysis software (Option 070/N8823A),
EZJIT Plus jitter analysis software (Option 004/N5400A), and EZJIT jitter analysis
software (Option 002/E2681A).

Standard accessories
USB optical mouse –– High-performance calibration cable (not included in DSA/
DSO90254A)
USB keyboard –– E2655B probe deskew and performance verification kit
User’s quick-start guide –– Two 54855-67604 BNC-compatible to precision 3.5 mm (f) adapters
(not included in DSA/DSO90254A)
Power cord
Stylus pen

Note: No probes are included with the DSA/DSO90000A Series oscilloscopes. The InfiniiMax Series probes or
any other probes must be purchased separately.

Additional options and accessories

DSO90000A-1CM Rack mount kit
DSO90000A-A61 ANSI Z540 compliant calibration
DSO90000A-801 Removable solid state drive
N2892A (requires Additional removable solid state drive for 90000 Series with Windows 7
Option 801)
DSO90000A-805 GPIB card-interface
DSO90000A-807 1 MΩ, adapter with a 500 MHz passive probe
DSO90000A-820 DVD-RW
DSO90000A-821 Additional precision BNC to SMA adapters, qty 2 Mount your 90000 Series scope in a 19”
For post sales, order two 54855-67604 precision BNC’s (487 mm) rack with option 1CM.
DSO90000A-822 External touchscreen monitor for Infiniium
DSO90000A-1A7 ISO17025 compliant calibration

Presales memory options

DSO90000A-20M 20 Mpts memory/CH upgrade
DSO90000A-50M 50 Mpts memory/CH upgrade 1
DSO90000A-100 100 Mpts memory/CH upgrade
DSO90000A-200 200 Mpts memory/CH upgrade
DSO90000A-500 500 Mpts memory/CH upgrade
DSO90000A-01G 1 Gpts memory/CH upgrade
Quickly remove your hard drive for
1.  Standard on DSA version oscilloscopes. additional security with Option 801.
37 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Infiniium 90000 Series Ordering Information (Continued)

Factory installed User installed SW applications
option for new standalone product
purchases number
002 E2681A-1NL EZJIT jitter analysis software (standard on DSA Series)
003 E2688A-1NL High-Speed serial data analysis with clock recovery and 8b/10b decoding (standard on DSA Series)
004 N5400A-1NL EZJIT Plus jitter analysis software (standard on DSA Series)
007 N5391A-1NL Protocol triggering and decode I2C/SPI
009 N5414B-1NL InfiniiScan event identification software
010 N5430A-1NL Infiniium user-defined function application software
012 N5461A-1NL Serial Data Equalization
013 N5465A-3NL Basic InfiniiSim Waveform Transformation Toolset
014 N5465A-1NL Advanced InfiniiSim Waveform Transformation Toolset
015 N5462A-1NL RS-232/UART Protocol triggering and decode
016 N5464A-1NL USB 2.0 Protocol triggering and decode
017 N5463A-1NL PCI EXPRESS Protocol triggering and decode
018 N8801A-1NL SAS/SATA Protocol triggering and decode
019 N8802A-1NL MIPI D-PHY Protocol triggering and decode
021 N5392B-3NL Ethernet electrical performance validation and compliance software
022 N5393F-1FP PCI EXPRESS electrical performance validations and compliance software
023 N5399C-3NL HDMI 1.4 electrical performance validation and compliance software
029 N5416A-1NL USB 2.0 compliance test software
030 N5431A-1NL XAUI electrical validation with 10GBASE-CX4, CPRI, OBSAI, and Serial RapidIO
031 U7233A-1NL DDR1 and LPDDR compliance test applications
032 N5413B-1NL DDR2 and LPDDR2 compliance test applications
033 U7231B-1NL DDR3 and LPDDR3 compliance test applications
034 N5394A DVI compliance application
035 U7238A MIPI compliance test application
036 U7236A 10GBASE-T Ethernet Electrical Compliance Application
038 N5411B-1NL SATA 6G Compliance Test Software
040 N5467B-1NL User Definable Application
041 U7243B-3NL USB 3.1 Compliance Test Software
043 N5412D-3NL Serial attached SCSI (SAS-2) electrical performance validation and compliance
045 U7232C-1NL DisplayPort 1.2 compliance test software
058 N6462A-1NL DDR4 and LPDDR4 compliance test application
060 N5392B 10/100/1000BTe Energy Efficient Ethernet
061 MATLAB - Basic Digital Analysis Package
062 MATLAB - Standard Digital Analysis Package
063 N8803A-1NL CAN, LIN and FlexRay Protocal triggering and decode
065 N6467A-1NL BroadR-Reach compliance
070 N8823A-1NL EZJIT Complete jitter and noise analysis software (Standard on DSA Series)
073 N6466A-1NL MOST compliance
N8845A-1FP N8845A-2FP SPMI protocol trigger and decode
—1 —1 Generic Raw – NRZ protocol decode
—2 —2 Generic Raw – PAM-4 protocol decode

1.  Standard with SDA option (firmware 6.0 and up).

2.  Requires PAM-4 compliance app and SDA option (firmware 6.0 and up).
38 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Infiniium 90000 Series Ordering Information (Continued)

Oscilloscope bandwidth upgrades
Note: Order as many upgrades as
Upgrade Descriptions needed to reach the desired final
N5471A DSA/DSO91204A to DSA/DSO91304A upgrade (12 to 13 GHz) bandwidth of the instrument. For
N5471B DSA/DSO90804A to DSA/DSO91204A upgrade (8 to 12 GHz) example, to upgrade from a
N5471C DSA/DSO90604A to DSA/DSO90804A upgrade (6 to 8 GHz) DSA/DSO90804A to
N5471D DSA/DSO90404A to DSA/DSO90604A upgrade (4 to 6 GHz) DSA/DSO91304A order N5471B
N5471E DSA/DSO90254A to DSA/DSO90404A upgrade (2.5 to 4 GHz) and N5471A.

Oscilloscope memory upgrades

Upgrade Descriptions
N5472A After-purchase 10 Mpts per channel to 20 Mpts per channel memory
upgrade
N5472B After-purchase 20 Mpts per channel to 50 Mpts per channel memory
upgrade
N5472C After-purchase 50 Mpts per channel to 100 Mpts per channel memory
upgrade
N5472D After-purchase 100 Mpts per channel to 200 Mpts per channel memory
upgrade
N5472E After-purchase 200 Mpts per channel to 500 Mpts per channel memory
upgrade
N5472F After-purchase 500 Mpts per channel to 1 Gpts per channel memory
upgrade

Operating system upgrades

Upgrade Descriptions
N2753A Windows 7 for Infiniium 90000 scope with Windows XP and SN>MY50410100
N2754A-002 Window 7 and M890 motherboard for Infiniium 90000 scopes with Windows
XP and SN <MY50410100

Rackmount kit upgrades

Upgrade Descriptions
N5470A Rackmount kit for Infiniium 90000A Series oscilloscope. Rackmount is seven
rack units long
For more information please consult the Installation Guide at
literature.cdn.keysight.com/litweb/pdf/N5470-92000.pdf.
39 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Keysight Oscilloscopes
Multiple form factors from 20 MHz to > 90 GHz | Industry leading specs | Powerful applications
40 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

www.axiestandard.org
AdvancedTCA® Extensions for Instrumentation and Test (AXIe) is an
open standard that extends the AdvancedTCA for general purpose and
semiconductor test. The business that became Keysight was a founding
member of the AXIe consortium. ATCA®, AdvancedTCA®, and the ATCA logo
are registered US trademarks of the PCI Industrial Computer Manufacturers
Group.

www.lxistandard.org
LAN eXtensions for Instruments puts the power of Ethernet and the Web
inside your test systems. The business that became Keysight was a founding
member of the LXI consortium.

www.pxisa.org
PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers a
rugged, PC-based high-performance measurement and automation system.

Download your next insight

Keysight software is downloadable
expertise. From first simulation through
first customer shipment, we deliver the
tools your team needs to accelerate from
data to information to actionable insight.

–– Electronic design automation (EDA)

software Learn more at
–– Application software www.keysight.com/find/software
–– Programming environments
–– Productivity software Start with a 30-day free trial.
www.keysight.com/find/free_trials
41 | Keysight | Infiniium 90000 Series Oscilloscopes - Data Sheet

Evolving Since 1939 For more information on Keysight

Technologies’ products, applications or
Our unique combination of hardware, software, services, and people can help you services, please contact your local Keysight
reach your next breakthrough. We are unlocking the future of technology. office. The complete list is available at:
From Hewlett-Packard to Agilent to Keysight. www.keysight.com/find/contactus

Americas
Canada (877) 894 4414
Brazil 55 11 3351 7010
Mexico 001 800 254 2440
United States (800) 829 4444

Asia Pacific
Australia 1 800 629 485
China 800 810 0189
Hong Kong 800 938 693
myKeysight India 1 800 11 2626
www.keysight.com/find/mykeysight Japan 0120 (421) 345
A personalized view into the information most relevant to you. Korea 080 769 0800
Malaysia 1 800 888 848
http://www.keysight.com/find/emt_product_registration Singapore 1 800 375 8100
Taiwan 0800 047 866
Register your products to get up-to-date product information and
Other AP Countries (65) 6375 8100
find warranty information.
Europe & Middle East
Keysight Services Austria 0800 001122
www.keysight.com/find/service Belgium 0800 58580
Keysight Services can help from acquisition to renewal across your Finland 0800 523252
instrument’s lifecycle. Our comprehensive service offerings—one- France 0805 980333
stop calibration, repair, asset management, technology refresh, Germany 0800 6270999
consulting, training and more—helps you improve product quality Ireland 1800 832700
and lower costs. Israel 1 809 343051
Italy 800 599100
Keysight Assurance Plans Luxembourg +32 800 58580
Netherlands 0800 0233200
www.keysight.com/find/AssurancePlans
Russia 8800 5009286
Up to ten years of protection and no budgetary surprises to ensure
Spain 800 000154
your instruments are operating to specification, so you can rely on Sweden 0200 882255
accurate measurements. Switzerland 0800 805353
Opt. 1 (DE)
Keysight Channel Partners Opt. 2 (FR)
www.keysight.com/find/channelpartners Opt. 3 (IT)
Get the best of both worlds: Keysight’s measurement expertise and United Kingdom 0800 0260637
product breadth, combined with channel partner convenience.
For other unlisted countries:
cdma2000 is a US registered certification mark of the Telecommunica- www.keysight.com/find/contactus
tions Industry Association. (BP-9-7-17)

PCI-SIG®, PCIe® and the PCI Express® are US registered trademarks and/or
service marks of PCI-SIG. DEKRA Certified
ISO9001 Quality Management System

MIPI® service marks and logo marks are owned by MIPI Alliance, Inc. and any
use of such marks by Keysight Technologies is under license. Other service www.keysight.com/go/quality
marks and trade names are those of their respective owners. Keysight Technologies, Inc.
DEKRA Certified ISO 9001:2015
WiMAX, Mobile WiMAX, WiMAX Forum, the WiMAX Forum logo, WiMAX Quality Management System
Forum Certified, and the WiMAX Forum Certified logo are US trademarks of
the WiMAX Forum.
This information is subject to change without notice.
© Keysight Technologies, 2012 - 2017
Published in USA, September 13, 2017
5989-7819EN
www.keysight.com