3A Ultra Low Dropout Linear Regulator GS7162
Features General Description
Maximum 3A Low-Dropout Voltage Regulator The GS7162 can deliver up to 3A of continuous
Ultra Low Dropout Voltage output current with a typical dropout voltage of
Typically 170mV at 3A Output Current only 170mV using internal n-channel MOSFETs.
High Output Accuracy over Line, Load and The linear regulator uses a separate VDD supply
Temperature to power the control circuitry and drive the
Build-In Soft-Start Internal n-channel MOSFETs.
Power-On-Reset Monitoring on Both VDD The GS7162 allows the use of low-ESR ceramic
and VIN Pins capacitor as low as 10uF. Moreover the IC
Power-OK Output function provides good performance on both line transient
Low ESR Output Capacitor(Multi-layer Chip response and load transient response.
Capacitors (MLCC)) Applicable The GS7162 provides current limit, short current
Vout Pull Low Resistance when Disable protection and thermal shutdown to prevent the
TDFN10-3x3 package. linear regulator from damage. Built-in soft-start
Green Product (RoHS, Lead-Free, minimizes stress on the input power source by
Halogen-Free Compliant) reducing capacitive inrush current on start-up.
During start-up, POK remain low until the output
Applications reaches 92% of its rating value.
Notebook PC Applications The GS7162 is available in TDFN10-3x3
Motherboard Applications package.
Low Voltage Logic Supplies
Microprocessor and Chipset Supplies
Graphic Cards
Cordless phones
This document is GStek's confidential information. Anyone having confidential obligation to GStek shall keep this document confidential. Any unauthorized
disclosure or use beyond authorized purpose will be considered as violation of confidentiality and criminal and civil liability will be asserted.
Green Solution Technology Co.,LTD.
Rev.:1.1 1 Feb-19
СКАЧАНО С WWW.SW.BAND - ПРИСОЕДИНЯЙСЯ!