Scribd
Upload
9 views1 page

Rear Blow

The document provides inspection procedures for both the front and rear blower motors of an air conditioning system. It includes steps for disconnecting the battery, removing the blower motors, and testing their operation by connecting them to a battery. If the motors do not operate smoothly during testing, they should be replaced.

Uploaded by

Alfredo De la Vega
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
9 views1 page

Rear Blow

The document provides inspection procedures for both the front and rear blower motors of an air conditioning system. It includes steps for disconnecting the battery, removing the blower motors, and testing their operation by connecting them to a battery. If the motors do not operate smoothly during testing, they should be replaced.

Uploaded by

Alfredo De la Vega
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

AC–43

AIR CONDITIONING – REAR BLOWER MOTOR

FRONT BLOWER MOTOR


ON–VEHICLE INSPECTION
1. DISCONNECT NEGATIVE (–) TERMINAL CABLE
FROM BATTERY
2. REMOVE FRONT BLOWER MOTOR
(a) Disconnect the connectors from the blower motor and
the blower resistor.
(b) Remove the 3 screws and the blower motor.

3. INSPECT FRONT BLOWER MOTOR OPERATION


Connect the positive (+) lead from the battery to termi-
nal 1 and the negative (–) lead to terminal 2,
then check that the motor operation is smooth.
If operation is not as specified, replace the motor.

REAR BLOWER MOTOR


ON–VEHICLE INSPECTION
1. DISCONNECT NEGATIVE (–) TERMINAL CABLE
FROM BATTERY
2. REMOVE REAR BLOWER MOTOR
(a) Remove the console box.
(b) Remove the rear blower motor.

3. INSPECT REAR BLOWER MOTOR OPERATION


Connect the positive (+) lead from the battery to termi-
nal 1 and the negative (–) lead to terminal 2.
then check that the motor operation is smooth.
If operation is not as specified, replace the motor.

You might also like