Scribd
Upload
8 views2 pages

Bio

The document outlines essential laboratory safety rules that should be included in safety policies, emphasizing emergency procedures, proper signage, and the use of safety equipment. Key points include knowing evacuation procedures, the location of safety equipment, and the importance of reporting injuries and unsafe conditions. Additional rules cover safe handling of materials, proper use of equipment, and maintaining a clean and safe working environment.

Uploaded by

hamzaafzaal10
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
8 views2 pages

Bio

The document outlines essential laboratory safety rules that should be included in safety policies, emphasizing emergency procedures, proper signage, and the use of safety equipment. Key points include knowing evacuation procedures, the location of safety equipment, and the importance of reporting injuries and unsafe conditions. Additional rules cover safe handling of materials, proper use of equipment, and maintaining a clean and safe working environment.

Uploaded by

hamzaafzaal10
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

The following are rules that relate to almost every laboratory and should be included in most

safety policies. They cover what you should know in the event of an emergency, proper
signage, safety equipment, safely using laboratory equipment, and basic common-sense
rules.

1. Be sure to read all fire alarm and safety signs and follow the instructions in the event of
an accident or emergency.

2. Ensure you are fully aware of your facility's/building's evacuation procedures.

3. Make sure you know where your lab's safety equipment—including first aid kit(s), fire
extinguishers, eye wash stations, and safety showers—is located and how to properly
use it.

4. Know emergency phone numbers to use to call for help in case of an emergency.

5. Lab areas containing carcinogens, radioisotopes, biohazards, and lasers should be


properly marked with the appropriate warning signs.

6. Open flames should never be used in the laboratory unless you have permission from a
qualified supervisor.

7. Make sure you are aware of where your lab's exits and fire alarms are located.

8. An area of 36" diameter must be kept clear at all times around all fire sprinkler heads.

9. If there is a fire drill, be sure to turn off all electrical equipment and close all containers.

10. Always work in properly-ventilated areas.

11. Do not chew gum, drink, or eat while working in the lab.

12. Laboratory glassware should never be utilized as food or beverage containers.

13. Each time you use glassware, be sure to check it for chips and cracks. Notify your lab
supervisor of any damaged glassware so it can be properly disposed of.

14. Never use lab equipment that you are not approved or trained by your supervisor to
operate.

15. If an instrument or piece of equipment fails during use, or isn't operating properly, report
the issue to a technician right away. Never try to repair an equipment problem on your
own.
16. If you are the last person to leave the lab, make sure to lock all the doors and turn off all
ignition sources.

17. Do not work alone in the lab.

18. Never leave an ongoing experiment unattended.

19. Never lift any glassware, solutions, or other types of apparatus above eye level.

20. Never smell or taste chemicals.

21. Do not pipette by mouth.

22. Make sure you always follow the proper procedures for disposing lab waste.

23. Report all injuries, accidents, and broken equipment or glass right away, even if the
incident seems small or unimportant.

24. If you have been injured, yell out immediately and as loud as you can to ensure you get
help.

25. In the event of a chemical splashing into your eye(s) or on your skin, immediately flush
the affected area(s) with running water for at least 20 minutes.

26. If you notice any unsafe conditions in the lab, let your supervisor know as soon as
possible.

You might also like