Scribd
Upload
46 views4 pages

Continental Sim2k 47 Hyundai 1

The document provides technical details about the SIEMENS SIM2K-47 ECU used in Hyundai vehicles, highlighting its dual microprocessor and flash eprom setup. It specifies the connection process using the CABLE F32GN037C and the designation of the left and right flashes for engine maps. Additionally, it includes instructions for connecting the GREY wire of the cable to the ECU connectors.

Uploaded by

alahdaltrading2
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
46 views4 pages

Continental Sim2k 47 Hyundai 1

The document provides technical details about the SIEMENS SIM2K-47 ECU used in Hyundai vehicles, highlighting its dual microprocessor and flash eprom setup. It specifies the connection process using the CABLE F32GN037C and the designation of the left and right flashes for engine maps. Additionally, it includes instructions for connecting the GREY wire of the cable to the ECU connectors.

Uploaded by

alahdaltrading2
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

SIEMENS SIM2K-47 HYUNDAI

plugin 367, 368

This ECU is equipped with 2 Microprocessors and 2 Flash Eprom. We have created 2 different
plugin because in this way it is not possible to exchange the DIM files for the full writing.
With the ECU connector faced bottom we define the RIGHT Flash as “R”, instead the LEFT Flash
will be “L”. The engine maps are placed in the left Flash “L”.

https://ecu.design
SIEMENS SIM2K-47 HYUNDAI

DIRECT CONNECTION
In order to connect to the ECU use the CABLE F32GN037C.
Make sure that the POWER led (red) on Trasdata is ON.

LEFT FLASH “L”


ECU CONNECTOR

https://ecu.design
SIEMENS SIM2K-47 HYUNDAI

POL4 CONNECTION

Connect the GREY wire of the cable F32GN037C as described here below :

https://ecu.design
SIEMENS SIM2K-47 HYUNDAI

RIGHT FLASH “R”


ECU CONNECTOR

POL4 CONNECTION

Connect the GREY wire of the cable F32GN037C as described here below :

https://ecu.design

You might also like