SMT e CATALOGUE

FOREWORD
The Special Maintenance Tools e Catalogue “SMT e CAT” is a comprehensive compilaon of SMT’s developed ll date.

Specially compiled for all the types of SMT’s used in AL range of Vehicles, “SMT e CAT” covers Special Maintenance Tools
in the full range of AL vehicles.

User friendly catalogue is for use by AL Service, Parts Personnel, State Transport Undertakings, Defence and others using
AL Products.

By Using “Quick Search” opon {Control+F} and easy navigaon, user can locate SMTs easily with Descripon or Part
number

In accordance with Ashok Leyland policy of connual improvements, the company reserves the right to add, update and
delete SMTs at any me and without prior noce. Relevant changes would be updated in subsequent version. Care has
been taken to include as much as useful informaon as possible and to ensure this catalogue is accurate.

The informaon and data given in this catalogue are indicave in nature and not binding.

In case of any suggesons or assistance, please contact als@ashokleyland.com

Ashok Leyland Service Training Centre,

Services Training Center, Plot No.23, Kathivakkam High Road, Ennore, Chennai – 600 057, India
Tel:+91 44 2575 0132 / 2575 0151 : Fax : +91 44 2575 0145
Web: www.ashokleyland.com

STC-CHN- SMTeCAT /BV :03-2015

 Contents

1. H-Engine............................................................................................................. 6
2. AL ENGINE............................................................................................................ 31
3. Neptune engine............................................................................................... 48
4. IVECO ENGINE..................................................................................................... 59
5. Clutch................................................................................................................ 79
6. Front Axle........................................................................................................ 82
7. Gearbox............................................................................................................. 122
8. Propeller Shaft ........................................................................................... 161
9. Rear Axle........................................................................................................... 162
10. Drive Head....................................................................................................... 191
11. captain tool................................................................................................... 203
12. Janbus tools.................................................................................................. 217
13. Steering.......................................................................................................... 229
14. Boss................................................................................................................... 234
15. Cabin ................................................................................................................. 259
16. Stand................................................................................................................. 260
17. General tools............................................................................................... 271
 H-Engine
SL.NO AL Part No SMT Photo application description
Adapter idler gear
spindle

To be used with 0102003

sliding hammer to extract
1 P2607147
idler gear spindle-
H ENGINE

Sliding hammer

To remove injectors,idler
gear spindle etc with
2 P2607247
respective
adoptors-H ENGINE

6
 H-Engine
SL.NO AL Part No SMT Photo application description
Drift oil seal flywheel
Hsg.(4mm step height)

T o press oil seal crank

3 P2607347 shaft rear end in F.W.Hsg-H
ENGINE.

Compressor valve spring

To assemble and disassem-

4 P2607447 ble inlet & Exhaust valve- H
ENGINE.

7
 H-Engine
SL.NO AL Part No SMT Photo application description
Adapter Engine
compression checking
(Euro-0)

To be used with 0102021

gauge compression
5 P2607547 checking .To check the com-
pression pressure of each
cylinder- H ENGINE.

Locking device FIP

Flywheel

To lock the flywheel FIP

6 P2607647 while fitting the FIP Assy-H
ENGINE. .

8
 H-Engine
SL.NO AL Part No SMT Photo application description
Special socket cylinder
head bolt

To tighten cylinder head

7 P2607747 bolts after fixing rocker
shaft assy - H ENGINE.

Extractor cylinder liner

To extract cylinder
8 P2607847
liner- H ENGINE.

9
 H-Engine
SL.NO AL Part No SMT Photo application description

Guide cylinder liner

To guide the cylinder liners

9 P2607947 with inserting it into bore-
H ENGINE.

Drift & extractor con

rod bushes

To extract and install

10 P2608147 connecting rod shaft bush-
es- H ENGINE.

10
 H-Engine
SL.NO AL Part No SMT Photo application description
Drift for Double lip Valve
guide seal

Valve guide seal installer

11 P9900373
(double lip)-H ENGINE

Drift valve steam steal

To install valve stem

12 P2608247
seal-H ENGINE.

11
 H-Engine
SL.NO AL Part No SMT Photo application description
Adopter injector
removal

To be used with 0102003

13 P2608347 sliding hammer,to remove
injector-H ENGINE.

Timing tool FIP

To set the fuel injection

14 P2609047 timing after fitting FIP-H
ENGINE.

12
 H-Engine
SL.NO AL Part No SMT Photo application description
Drift & extractor cam
bushes

To extract and install cam

15 P2609147 shaft shaft bushes-H
ENGINE.

Compressor piston ring

To compress piston rings

16 P2610647
during assembly-H ENGINE.

13
 H-Engine
SL.NO AL Part No SMT Photo application description
Drift oil seal flywheel
Hsg,(6.0mm height)

To press oil seal crank

17 P2610747 shaft rear end in flywheel
Hsg- H ENGINE.

Crank shaft rear PTFE

oil seal fitment

PTFE oil seal drift-H

18 P9900720
ENGINE.

14
 H-Engine
SL.NO AL Part No SMT Photo application description
Adopter compression
checking (H-SERIES 6E1)

to be used with 0102021

gauge compression
checking,to
19 P2613247
check the compression
pressure in each
cylinders-H ENGINE.

Rubber guide

To guide the con rod to

20 P2613347 crank pin while
assembling-H ENGINE.

15
 H-Engine
SL.NO AL Part No SMT Photo application description

Collar press tool

BS II MODIFIED COUPLING PUMP

21 P9900195
TOOL-H ENGINE.

Drift Oil Seal TG case

Drift Oil Seal TG case

22 P2607047
-H ENGINE.

16
 H-Engine
SL.NO AL Part No SMT Photo application description

PTFE oil seal drift

PTFE oil seal drift -H

23 P9900541
ENGINE.

Wrench Engine Cranking

Wrench Engine
24 P2609247
Cranking-H ENGINE.

17
 H-Engine
SL.NO AL Part No SMT Photo application description

Retainer cylinder liner

Reatainer Cylinder
25 P2608047
Liner-H ENGINE.

Installer & remover 'E' Clip

cargo

To remove E clip on wedge

26 P3401355
shaft(Brakes)

18
 H-Engine
SL.NO AL Part No SMT Photo application description
Handle FIP Coupling Adopt-
er

LOOSENING NUT - FIP

COUPLING ADAPTOR-
27 P3405055
H ENGINE.(BS II MODIFIED
COUPLING PUMP TOOL)

Exractor FIP Coupling

adopter

To extract FIP coupling adap-

28 P3405155 tor(BS II MODIFIED
COUPLING PUMP TOOL)

19
 H-Engine
SL.NO AL Part No SMT Photo application description
Wrench oil filter
cartridge

To remove oil filter

29 P3405255 cartridge (BS II MODIFIED
COUPLING PUMP TOOL)

Adopter pre stroke gauge

BSII 8MM &10MM

Adopter pre stroke gauge

30 P3409847
BSII 8MM&10MM-H ENGINE.

20
 H-Engine
SL.NO AL Part No SMT Photo application description
gauge compression check-
ing

To be used with 0101009(E0) or

0101020(E1) - adaptor
compression checking to
31 P2600441
check the cylinder compres-
sion pressure in respective
engines-H ENGINE.

Adapter Engine
compression BS 3

To be used with 0102021

gauge compression
checking,to check
32 P2615547
the compression pressure in
each cylinders- H
ENGINE.

21
 H-Engine
SL.NO AL Part No SMT Photo application description
CRS pump gear wheel
holder

To prevent rotation during

33 P9900268 loosening and
tightening gear-H ENGINE

CRS pump Adapter

To check
34 P9900319 the compression pressure in
each cylinders-H ENGINE

22
 H-Engine
SL.NO AL Part No SMT Photo application description

spin on oil filter

To remove the oil and

35 PK500020 water seperator bowl-H
ENGINE

CRS pump gear wheel

Extractor

To remove FIP gear from CRS

36 P9900267
pump-H ENGINE

23
 H-Engine
SL.NO AL Part No SMT Photo application description

Drift Valve guide

Valve guide
37 P2608947
installer -H ENGINE

Cylinder head & block

pressure test kit HIND

To check the cylinder block

38 P2615647
pressure-H ENGINE

24
 H-Engine
SL.NO AL Part No SMT Photo application description
Locking device FIP
Flywheel

To lock the flywheel FIP

39 P9900085 while fitting the FIP Assy-H
ENGINE.

Drift bush remover

BS II modified coupling pump

40 P9900196
tool-H ENGINE

25
 H-Engine
SL.NO AL Part No SMT Photo application description
Bush pressing
compressing tool

BS II modified coupling pump

41 P9900197
tool-H ENGINE

Ring Top plate press

BS II Modified coupling
42 P9900198
Pump Tool -H ENGINE

26
 H-Engine
SL.NO AL Part No SMT Photo application description

Base plate

BS II Modified coupling
43 P9900199
Pump Tool -H ENGINE

Adopter injector
removal 4D

To be used with sliding

44 P9900266
hammer -H ENGINE

27
 H-Engine
SL.NO AL Part No SMT Photo application description

Main bearing cap puller

To be used with
0102003 - sliding hammer to
45 P9900374
remove main bearing
cap-H ENGINE

Puller vibration
Damper 4 D

To remove the damper

46 P9900269
from engine-H ENGINE

28
 H-Engine
SL.NO AL Part No SMT Photo application description

FIP locking tool

47 P2617247 To lock the FIP.

48 P2617147 Locking pin CRS

29
 H-Engine
SL.NO AL Part No SMT Photo application description

Hand spanner injector

49

30
 AL ENGINE
SL.NO AL Part No SMT Photo application description
Adapter CYLINDER
COMPRESSION
CHECKING (Euro 1)

To be used along with

0102021 gauge.
1 P3404847 Compression checking ,to
check individual cylinder
compression pressure(AL)

Centraliser cam shaft

To centralise camshaft
thrust washer with
2 P3407147
reference to cam
shaft centre(AL).

31
 AL ENGINE
SL.NO AL Part No SMT Photo application description
Installer - oil seal,
timer housing

To install oil seal in FIP timer

3 P3407547
housing(AL)

Tester valve leakage

To check the sealing

4 P3407747 between valve and valve
seat(AL)

32
 AL ENGINE
SL.NO AL Part No SMT Photo application description
Compressor piston ring
(370)

To compress the piston

rings while inserting the
5 P9900086 piston and con rod assy.into
the cylinder
bore(AL)

Extractor timer
assembly

To be used with 0101028

holder FIP timer assy,to
6 P9900087
extract timer assembly from
FIP(AL)

33
 AL ENGINE
SL.NO AL Part No SMT Photo application description
Tubular spanner cap
nut,timer assembly.

To be used with 0101028

holder FIP timer assy,to
7 P9900088
loosen or tighten cap nut
timer assembly (AL)

Holder - Flywheel FIP

To hold FIP flywheel while

8 P9900089 tightening or losening timer
to FIP Flywheel nuts(AL)

34
 AL ENGINE
SL.NO AL Part No SMT Photo application description
Holder Timer
assembly ,FIP

To hold FIP timer assembly

9 P9900090 while extracting timer from
FIP (AL)

Extractor cam shaft gear

& damper pulley

To extract vibration damper

10 P3403855
pulley and camshaft gear(AL)

35
 AL ENGINE
SL.NO AL Part No SMT Photo application description

Extractor cylinder liner

To extract and install

cylinder
11 P2800147 liners bunk 1 - common for
6.65,400 series of engines,
bunk 2 - for 370 engines(AL)

Drift valve stem seal (6.65)

To install valve steam seal

12 P2800647
(6.65)-AL

36
 AL ENGINE
SL.NO AL Part No SMT Photo application description

Brush oil gallery

13 P3400447 To clean main oil gallery(AL)

Extractor crank shaft oil

seal sleeve

To extract oil seal sleeve

14 P2602847 without damaging
crankshaft journal(AL)

37
 AL ENGINE
SL.NO AL Part No SMT Photo application description
Compressor Piston Ring
Tool

To Compress the Piston

Rings while inserting the
15 P2618447
piston and con-rod assy.in
to the cylinder bore-(AL)

Extractor crank shaft

gear

To remove crank shaft gear

16 P2800847
from Crank shaft-(AL)

38
 AL ENGINE
SL.NO AL Part No SMT Photo application description
Adaptor compression
checking(E-1)

To be used with 0102021

gauge compression
17 P3404247 checking ,to check the
compression pressure of
each cylinder-(AL)

Extractor injector-E1

To be used with 0102003

18 P2801347 sliding hammer,to remove
injectors-(AL)

39
 AL ENGINE
SL.NO AL Part No SMT Photo application description

Drop arm puller-E 1

19 P2801447 To extract the Drop arm-(AL)

Adapter injector
removal

To be used with 0102003

20 P2800247 sliding hammer, to remove
injectors-(AL)

40
 AL ENGINE
SL.NO AL Part No SMT Photo application description

Extractor water pump hub

To extract water pump hub

21 P3403247
and impeller-(AL)

Pilot & Drift valve seat

inlet

To install valve seat

22 P2800447
inlet-(AL)

41
 AL ENGINE
SL.NO AL Part No SMT Photo application description
Pilot & Drift valve seat
exhaust

To install valve seat

23 P2800547
exhaust -(AL)

Drift valve guide

24 P2802047 To install valve guide-(AL).

42
 AL ENGINE
SL.NO AL Part No SMT Photo application description

Compressor valve spring

To assemble and
25 P2802247 disassemble
inlet & Exhaust valves-(AL)

Wrench oil gallery plug.

To remove plug- main oil

26 P3400347
gallery-(AL)

43
 AL ENGINE
SL.NO AL Part No SMT Photo application description

Extractor

To extract compressor
27 P2600447 gear &
coupling flange(AL)

Spanner engine cranking

28 P2601147 To crank the engine-(AL)

44
 AL ENGINE
SL.NO AL Part No SMT Photo application description

Spanner engine cranking

To rotate the crank

29 P3406947
shaft(AL)

Z Gauge (14" 3 finger mech

actuation)

To check the parallesims of

withdrawal plate wrt
30 P3403947 flywheel housing ,to
ensure uniform clutch
finger height(AL)

45
 AL ENGINE
SL.NO AL Part No SMT Photo application description
Stand

Engine Assembly Rotating Engine Assembly Rotating

31 P2616047
Stand Al series Stand Al series(AL)

32 P9900416 AL Gear Box Assy Stand AL Gear Box Assy Stand (AL)

46
 AL ENGINE
SL.NO AL Part No SMT Photo application description

9S 75 Gear Box 9S 75 Gear Box

33 P9900419
Rotating Assy Stand Rotating Assy Stand(AL)

47
 Neptune engine
SL.NO AL Part No SMT Photo application description

Piston assy. Tool

To compess the piston rings

1 P2605047 and assemble the
piston(Neptune)

Tool injector sleeve

To remove and refit the

2 P9900299
injector sleeve-(Neptune)

48
 Neptune ENGINE
SL.NO AL Part No SMT Photo application description

cam shaft fixation

To lock the cam shaft during

3 P9900300
fixing the cam idler(Neptune)

Gear adjustment cam

shaft

To adjust and fix cam shaft

4 P9900301 gear during fixing
(Neptune)

49
 Neptune engine
SL.NO AL Part No SMT Photo application description
Gear adjustment cam
shaft idler

To adjust and fix cam shaft

5 P9900302
idler for N6(Neptune)

Gear adjustment cam

shaft idler

To adjust and fix cam shaft

6 P9900303
idler for N4(Neptune)

50
 Neptune ENGINE
SL.NO AL Part No SMT Photo application description

TDC locking on Flywheel

4 Cyl Flywheel TDC Locking

7 P9900304
Tool(Neptune)

Locking crank shaft

To lock crank shaft in

8 P9900305
N6(Neptune)

51
 Neptune engine
SL.NO AL Part No SMT Photo application description

To lock crank shaft in

9 P9900306
N6(Neptune)

Flywheel locking tool N6

To lock N6 flywheel(Nep-
10 P9900307
tune)

52
 Neptune ENGINE
SL.NO AL Part No SMT Photo application description
Flywheel locking tool
(4 Cylinder)

To lock N4 flywheel
11 P9900308
(Neptune)

Rear oil seal bunk

( for N4)

To fix rear oil seal in N4

12 P9900309
Engine(Neptune)

53
 Neptune engine
SL.NO AL Part No SMT Photo application description

Front oil seal bunk

To fix front oil seal in N4&N6

13 P9900310
Engine(Neptune)

Injector removal tool

Injector removing tool

14 P9900313
(Neptune)

54
 Neptune ENGINE
SL.NO AL Part No SMT Photo application description
Drift FW Bearing
(For 6 Cyl.)

To fix the flywheel

15 P9900311
bearing(Neptune)

Drift for crank shaft &

cam shaft dowel

16 P9900312 To fix the dowel(Neptune)

55
 Neptune engine
SL.NO AL Part No SMT Photo application description

Strap wrench

To remove coolant / fuel/

17 PK500020
oil-filter(Neptune)

Rear oil seal bunk

(for N6)

To fix rear oil seal in N4

18 P9900436
Engine(Neptune)

56
 Neptune ENGINE
SL.NO AL Part No SMT Photo application description

Drift valve stem

19 P9900298 To fix valve stem(Neptune)

Injector washer removal

tool

To remove the injector

20 P9900314
washer (Neptune)

57
 Neptune engine
SL.NO AL Part No SMT Photo application description
Filter removal tool
(Adaptor type)

To remove the filter

21 P9900315
(Neptune)

Valve spring pressing tool

To press the valve spring

22 P9900316
(Neptune)

58
 IVECO ENGINE
SL.NO AL Part No SMT Photo application description
Drift interchangeable
(Nose dia 28 mm)

To be used with 0105022

1 P3401155 installer front oil seal
crank shaft -IVECO.

Extractor & Drift con rod

bush

To extract and install

2 P3400355 connecting rod
bushes -IVECO.

59
 IVECO engine
SL.NO AL Part No SMT Photo application description
Extractor & Drift cam
bushes

To extract and install cam

3 P3400455
shaft bushes -IVECO

Installer crankshaft
front oil seal

To be used with 0105016

drift Interchangeable to
4 P3400555
press oil seal in timing
cover -IVECO

60
 IVECO ENGINE
SL.NO AL Part No SMT Photo application description

Drift valve guide removal

5 P3401755 To remove valve guide -IVECO.

Compressor valve spring

To assemble & disassemble

6 P3401855 inlet & exhaust
valves -IVECO

61
 IVECO engine
SL.NO AL Part No SMT Photo application description

Compressor valve spring

To be used with 0102021

gauge compression
7 P3402155 checking,To check the
compression pressure of
each cylinder -IVECO

Adapter - FIP Pre stroke

gauge

To be used along with dial

gauge (0.01-10mm),to set fuel
8 P3402255
injection timing on VE
pump -IVECO

62
 IVECO ENGINE
SL.NO AL Part No SMT Photo application description
Drift interchangeable
(Nose dia 20mm)

To be used along with

0105025-Installer crank shaft
9 P3402655
rear oil seal for pressing
the oil seal -IVECO.

Installer crankshaft rear

oil seal

To be used with 0105012

drift. Interchageable to
10 P3403755
press oilseal. Crank shaft
rear end in casing -IVECO

63
 IVECO engine
SL.NO AL Part No SMT Photo application description

Extracter sleeve

To Remove and
11 P3404455 refit injector
sleeve -IVECO

Adapter injector
removal

To be used with 0102003

sliding hammer and
12 P3404555
0105021-retainer injector
removal -IVECO.

64
 IVECO ENGINE
SL.NO AL Part No SMT Photo application description

Drift water pump seal

To install water pump

13 P3405355
seal -IVECO

Retaining injector sleeve

To be used with 0102003

sliding hammer and
0105017- Adapter injector
14 P3405455
extraction ,to hold the
injector sleeve while
removing injectors -IVECO

65
 IVECO engine
SL.NO AL Part No SMT Photo application description

Extractor spigot bearing

flywheel

To be used with 0102003

sliding hammer ,to extract
15 P3400255
spigot bearing from fly
wheel -IVECO

Installer valve guide

16 P3404355 To insatll valve guide -IVECO

66
 IVECO ENGINE
SL.NO AL Part No SMT Photo application description
Extractor water pump hub/
Impler

To extract water
17 P3401555
pump hub and impeller -IVECO

spanner valve clearance

Adj.

To be used with 13mm

18 P3401655 ring spaner to adjust
.valve,clerance -IVECO

67
 IVECO engine
SL.NO AL Part No SMT Photo application description
Extractor crank shaft
gears

To be used with 0305011

universal puller.To
19 P3402055
extract crank shaft gear &
oil pump gear -IVECO

Drift crank shaft core

plug .

To install crank shaft core

20
plug -IVECO

68
 IVECO ENGINE
SL.NO AL Part No SMT Photo application description

Remover - Snap ring

gudgeon pin Iveco
pistons

To remove snap ring on

21
piston gudgeon pin -IVECO

Restrainer flywheel

To hold the flywheel while

torque tightening damper
22
nut /fly wheel mounting
bolts -IVECO

69
 IVECO engine
SL.NO AL Part No SMT Photo application description

Ext.Damper hub

To extract damper
23
hub -IVECO

Extractor /installer To Extract and install

24
cylinder block cylinder liner -IVECO

70
 IVECO ENGINE
SL.NO AL Part No SMT Photo application description
Front axle
Spannar grease cup type
30 cargo 709

To remove grease cup

25 P3402755
(CARGO)

Clutch

Fixture diaphragm 350mm

To overhaul diaphragm
26 P2804047
clutch assy.

71
 IVECO engine
SL.NO AL Part No SMT Photo application description

Fixture diaphragm

To overhaul diaphragm
27 P9900435
clutch assy.

Clutch gauge 280

28 P9900320 To set clutch

72
 IVECO ENGINE
SL.NO AL Part No SMT Photo application description

Gear box

Bracketset removing
casing.

To be used Along with

0305011-universal puller ,to
29 P3400655
extract gearbox
rear half casing -IVECO

Extractor reverse gear

shaft

To be used with
0102003-sliding hammer to
30 P3402555
extract reverse idler gear
shaft-IVECO.

73
 IVECO engine
SL.NO AL Part No SMT Photo application description

Installer seal input shaft

cover

To be used with 0105016-drift

Interchageable ,to install
31 P3400755
oil sealinput shaft
cover-IVECO

Dial gauge with bridge

tool

To be used along with a std.

dial gauge,to measure pre-
32 P3400855 load adj. spacer thickness
of lay shaft
berarings -IVECO

74
 IVECO ENGINE
SL.NO AL Part No SMT Photo application description

Installer rear cover seal

To fix oil seal in rear

33 P3400955
cover-IVECO

Socket pinion shaft

collar nut

To loosen or tighten input

34 P3401055
shaft collar nut-IVECO.

75
 IVECO engine
SL.NO AL Part No SMT Photo application description

Extractor main shaft gear

Used for dismantling main

35 P3402455 shaft gears to be used
along with SMT 8046

Installer taper roller

brg.outer race

To be used with 0105016-drift

Interchageable ,to install
363
counter shaft brg outer
race-IVECO

76
 IVECO ENGINE
SL.NO AL Part No SMT Photo application description

Universal puller

To be used with respective

adoptors/bracket sets,to
37 P3402355
extract various comp.from
GB-IVECO

Extractor outer race

(taper roller brg )

To extract outer races of

38 counter shaft T/R bearing s
from GB Casing-IVECO

77
 IVECO engine
SL.NO AL Part No SMT Photo application description
Bracket set removing
taper roller brg.

To extract taper roller

39 bearing-counter shaft
front and rear -IVECO

Propeller shaft
Extractor centre bearing
(Iveco)

To remove centre joint

40 P3404655
bearing-IVECO

78
 Clutch
SL.NO AL Part No SMT Photo application description

Compressor clutch spring

MDV & HGP

To disaasemble and
assemble clutch assy/
1 P2600347
presure plate assy
(AXIAL SPRING CLUTCH).

Gauge finger height set-

ting 14" four finger

To check the parallelism of

withdrawal plate wrt
flywheel housing.to
2 P2616647
ensure uniform
clutch finger height
(AXIAL SPRING CLUTCH)

79
 Clutch
SL.NO AL Part No SMT Photo application description
Gauge finger setting 15
four finger

To check the pallalesim of

clutch finger TIP wrt
flywheel housing ,to
3 P2616747
ensure uniform
clutch finger height
(AXIAL SPRING CLUTCH)

Centraliser clutch disc

(Nose dia 25mm)

To centralise clutch disc

with reference to cover
assy or pressure plate
4 P2800747 assembly during
refitment(Applicable to AL &
Iveco engine flywheels)-
(AXIAL SPRING CLUTCH)

80
 Clutch
SL.NO AL Part No SMT Photo application description
Centraliser clutch disc
(Nose dia 17mm)

To centralise clutch disc

with reference to cover
assy or pressure plate
assembly during
5 P3403955
refitment(Applicable to
H-engine flywheels
refitment)
(AXIAL SPRING CLUTCH)

81
 Front Axle
SL.NO AL Part No SMT Photo application description

Extractor ball pin

To remove track rod from

1 P2801547 steering lever-
FRONT AXLE MDV (4T & 5T)

Extractor ball piller 3.8

Ton cargo

To remove track rod from

2 P3404955 lever -stag
(FA 3T)

82
 Front Axle
SL.NO AL Part No SMT Photo application description
Front hub nut spannar for
FA91

To remove and tighten hub

3 P3401747 nut -FRONT
AXLE-(FG945)

Drift bearing outer race

To install outer race hub

4 P2613647 bearing-FRONT AXLE
MDV (4T & 5T)

83
 Front Axle
SL.NO AL Part No SMT Photo application description
Drift spring eye bush
(Comet)

To extract and install bush

shackle pin on
5 P2613447
spring eye
(suspension)

Hub Nut Spanner

To loosen or tighten hub

6 P2613547 nut front
(Comet 4T & 5T)

84
 Front Axle
SL.NO AL Part No SMT Photo application description

Socket jam nut

To tighten or loosen
7 P2616347
jam nut (FG 945)

Socket adjusting nut

To tighten or loosen
8 P2616447 adjusting
nut (FG 945)

85
 Front Axle
SL.NO AL Part No SMT Photo application description
Extractor & installer king
pin bush

To extract and press king

9 P2616547
pin bush (FG 945)

Drift bearing 4 Ton

To press bearing race

10 P3405447
FRONT AXLE MDV (4T & 5T)

86
 Front Axle
SL.NO AL Part No SMT Photo application description

Drift king pin bush top

To install king pin Top bush

11 P2803747
FRONT AXLE MDV (4T & 5T)

Drift king pin bush

bottom

To install king pin bottom

12 P2803847
bush FRONT AXLE MDV (4T & 5T)

87
 Front Axle
SL.NO AL Part No SMT Photo application description
Installer & remover 'E' Clip
cargo

1.To install circlip on

expander assy(Brakes)
13 P9900107
2.Eaton 9306 main shaft
bearing installer

installer &extractor
spring cage

To remove and refit cage on

14 P9900108
housing(Brakes)

88
 Front Axle
SL.NO AL Part No SMT Photo application description
Drift Excluder assy
Fitment cargo

To install excluder
15 P9900109
assy(Brakes)

Drift king pin bush(fixing)

For pressing the king

16 P9900209
pin bush(FA 90/FA91)

89
 Front Axle
SL.NO AL Part No SMT Photo application description
Drift king pin bush
(Removing)

For removing the king pin

17 P9900210
bush(FA 90/FA91)

Shim centraliser

To centralise all bores and

18 P9900211
shims in line(FA 90/FA91)

90
 Front Axle
SL.NO AL Part No SMT Photo application description

Puller drop arm type 3121

To extract drop arm type

19 P9900212
(ZF)-3121

Fxture ball pin assy.

Used while installing ball pin

20 P2801847
FRONT AXLE MDV (4T & 5T)

91
 Front Axle
SL.NO AL Part No SMT Photo application description

Tool brake adjusting

To adjust brake in rear axle

21 P3405147
(Brakes)

socket spring clamp nut

To tighten or loosen spring

22 P2600747
clamp nut
(Comet)-suspension

92
 Front Axle
SL.NO AL Part No SMT Photo application description

puller

Puller hub front & rear.To

23 P2601047 extract hub
assy(common for 8T & 10 T)

Drift needle brg.stub

axle

To install the needle bear-

24 P2605947 ing in stub axle
(Stallion 4 x 4)

93
 Front Axle
SL.NO AL Part No SMT Photo application description

Drift oil seal stub axle

To install the oil seal into

25 P2606047
stub axle(Stallion 4 x 4)

Drift spacer ring stub axle

To install spacer ring on

26 P2606147
the stub axle(Stallion 4 x 4)

94
 Front Axle
SL.NO AL Part No SMT Photo application description
Drift dust boot adj.plung-
er

To install dust boot in to

27 P2606247 adjustable plunger
(Stallion 4 x 4)

Drift outer race hub Brg

To install the outer race of

28 P2606347 outer & inner bearing in the
hub(Stallion 4 x 4)

95
 Front Axle
SL.NO AL Part No SMT Photo application description

Drift oil seal hub inner

To install oil seal in hub

29 P2606447
(Stallion 4 x 4).

Spanner slotted nut hub

To loosen & tighten hub nut

30 P2606547
(Stallion 4 x 4)

96
 Front Axle
SL.NO AL Part No SMT Photo application description

Driving plate wheel drag.

To check the front wheel

31 P2606647
drag(Stallion 4 x 4).

Remover shoe return

spring

To remove & refit brake shoe

32 P2608447 return springs- Saw
brakes (Stallion 4 x 4).

97
 Front Axle
SL.NO AL Part No SMT Photo application description

Bore aligment tool J/F-S/A

To align stub axle and joint

33 P2608647 flange during
assembly(Stallion 4 x 4).

Puller stub axle inner

bearing

To remove stub axle inner

34 P2613747
bearing(5Ton)

98
 Front Axle
SL.NO AL Part No SMT Photo application description

Drift top bush(3.8 ton)

To press Kingpin top bush

35 P9900361
(3.8 ton)

Drift bearing outer race

4 Ton

To press outer race FRONT

36 P3407247
AXLE MDV (4T & 5T)

99
 Front Axle
SL.NO AL Part No SMT Photo application description
Extractor & installer
shackle pin .

To extract & installer

37 P3404347 shackle pin
suspension(MDV)

Locater locking spindle

double joint

To locate the double joint

shaft locking spindle while
38 P2605847
pressing the needle bearing
on it (stallion4 x 4)

100
 Front Axle
SL.NO AL Part No SMT Photo application description

Extractor spacer Ring

To remove the spacer ring

39 P2606747
from stub axle (stallion4 x 4)

Puller stub axle inner

bearing 4 Ton

To remove stub axle bearing-

40 P2604647
MDV (4T & 5T)

101
 Front Axle
SL.NO AL Part No SMT Photo application description
Spanner hub nut type 50
cargo 909

To loosen or tighten hub

41 P3403055
nut spanner-909(FA)

Puller hub inner bearing

909 cargo

To extract the inner bearing

42 P9900119
front hub-(FA 3T)

102
 Front Axle
SL.NO AL Part No SMT Photo application description
Drift king pin bush type 50
cargo 909

To install king pin top and

43 P3402955 bottom
bushes-(FA 3T)

Shim centraliser

To centralise all bores and

44 PK500022
shims in line-(FA 99)

103
 Front Axle
SL.NO AL Part No SMT Photo application description

Drift oil seal joint flange

Drift oil seal joint flange

RB. To install the oil seal
45 P2602547
into joint flange at roller
area(4 x 4).

Drift needle Bearing

Drift needle brg.(joint

flange). To install the nee-
46 P2605647
dle bearing in joint flange
(4 x 4)

104
 Front Axle
SL.NO AL Part No SMT Photo application description

Drift oil seal joint flange

Drift oil seal joint flange

NB. To install the oil seal in
47 P2605747 to joint flange holes at the
needle bearing area
(4 x 4).

Drift oil seal joint flange

Drift oil seal double joint

48 P2602047 flange. To install oil seal in
double joint shaft (4 x 4)

105
 Front Axle
SL.NO AL Part No SMT Photo application description
Drift roller bearing joint
flange

Drift roller brg joint

flange. To install the
49 P2602447
roller bearing into joint
flange(4 x 4)

brake adjuster front axle

50 P9900370 To adjust brake in front axle

106
 Front Axle
SL.NO AL Part No SMT Photo application description

Pusher king pin (3.8 Ton)

51 P9900363 To press king pin -FA

Pry bar

To lift and see the

52
backlash-FA

107
 Front Axle
SL.NO AL Part No SMT Photo application description
Installer End
Fittings Nylon Brakes
Pipe

To install end fittings to

53 P2613947
nylon brake pipes - BRAKES

TO CHECK BEND AND

54 P2613847
TWIST IN FRONT AXLE BEAM

108
 Front Axle
SL.NO AL Part No SMT Photo application description
Drift bottom bush king pin
3.8 ton

To press bottom king pin

55 P9900362
bush 3.8 ton

Hook ball pin assembly

Hook ball pin assembly

56 P3404747
FRONT AXLE MDV (4T & 5T)

109
 Front Axle
SL.NO AL Part No SMT Photo application description

Pusher ball pin (6 ton Hgp)

To remove track rod from

57 P3402847
steering lever( HGP 680)

Puller hub front & rear (10

holes)

To remove the hub from axle

58 P2603347
(HGP 680)

110
 Front Axle
SL.NO AL Part No SMT Photo application description

Drift hub outer race

To install hub outer race

59 P3400547
(FA 90 6T)

Drift hub inner race

To install hub inner race

60 P3409747
(FA 90 6T)

111
 Front Axle
SL.NO AL Part No SMT Photo application description
Drift king pin Bush
Removing

For pressing the king

61 P3401647
pin bush(FA 90 6T)

Drift outer bearing

To install the inner bearing

62 P3401547
(FA 90 6T)

112
 Front Axle
SL.NO AL Part No SMT Photo application description

Drift hub oil seal

To install hub oil seal

63 P3400247
(FA 90 6T)

Drift inner bearing

To install the inner bearing

64 P3401447
(FA 90 6T)

113
 Front Axle
SL.NO AL Part No SMT Photo application description

Drift king pin Bush Fixing

For pressing the king

65 P3409647
pin bush(FA90) 6T

hub puller

To remove the hub

66 P3400747
from the axle(FA 85)

114
 Front Axle
SL.NO AL Part No SMT Photo application description

Drift Outer race removal

To remove the hub outer

67 P3400847
race( FA 85)

Drift Outer race fixing

To install the hub outer

68 P3400947
race( FA 85)

115
 Front Axle
SL.NO AL Part No SMT Photo application description

Drift inner race removal

To remove the hub inner

69 P3401047
race( FA 85)

Drift Inner Race Fixing

To install the hub inner race

70 P9900377
( FA 85)

116
 Front Axle
SL.NO AL Part No SMT Photo application description

Drift oil seal

To install the hub oil seal

71 P3401147
( FA 85)

Axle arm king pin shim

centraliser

To centralise all bores and

72 P9900379
shims in line(FA 85)

117
 Front Axle
SL.NO AL Part No SMT Photo application description

Hub bearing centraliser

To centralise the hub

73 P3401247
bearing ( FA 85)

Drift axle arm kingpin bush

To install Axle arm

74 P9900380
king pin bush( FA 85)

118
 Front Axle
SL.NO AL Part No SMT Photo application description
King pin Arm bush
remover

To remove Axle arm king

75 P3401347
pin bush( FA 85)

Pusher Ball Pin

To remove the ball pin from

76 P9900381
the track rod (FA 85)

119
 Front Axle
SL.NO AL Part No SMT Photo application description

Drift king pin locking

To remove
77 P2601247
cotter pin ( FA 85)

Toe in Toe Out Gauge

(Wheel Alignment Tool)

To check the toe in & toe

78 P9900426
out the vehicle

120
 Front Axle
SL.NO AL Part No SMT Photo application description
Drift king pin bush type 30
cargo 709

To install king pin top and

79 P3402855
bottom bushes

Bush Removal and

installation

TO Remove & install Bush.

80 P9900382
Front Axle FG 945

121
 Gearbox
SL.NO AL Part No SMT Photo application description

Gear box socket flange

nut 50 A/F

To loosen and tightening

1 P2612547 flange
(GEAR BOX - S5.36 S6.36)

Extractor bush

To remove and refit bush for

2 P2613047 auxillary gear box mounting
(Auxillary GB 4x4)

122
 Gearbox
SL.NO AL Part No SMT Photo application description

Lifting Device

To lift/ lower the

counter shaft
3 P2603547 and main shaft assys out of
main GB Casing
(ZF S6 36,S5 36 )

Drift selector shaft bush

To install selector shaft

4 P2603647
bush(ZF S6 36,S5 36)

123
 Gearbox
SL.NO AL Part No SMT Photo application description

Adoptor

To install selector
5 P2603747 housing oil
seal(ZF S6 36,S5 36)

Centraliser main shaft

assembly

To centralise main
shaft assy.
6 P2603947
while lowering into main GB
Casing.(ZF S6 36,S5 36)

124
 Gearbox
SL.NO AL Part No SMT Photo application description

Puller companion flange (4

and 8 holes flange)

To remove companion
7 P2610947
flange(ZF S6 36,S5 36)

Spanner Gear box rflange

nut

To be used with
0301007-flange holder to
8 P2613147
tighten or loosen GB flange
nut(AL GB 13).

125
 Gearbox
SL.NO AL Part No SMT Photo application description

Drift rear oil seal

To fit rear end oil seal in

9 P2604047 Gearbox Casing
(ZF S6 36,S5 36)

Puller main shaft gears

Extractor to be used along

with various split plates
and full round plates to
10 P2609347
extract
main shaft gears
(ZF S6 36,S5 36)

126
 Gearbox
SL.NO AL Part No SMT Photo application description

Drift spilt ring

To install input shaft split

11 P2604147
rings(ZF S6 36,S5 36)

Drift front oil seal

To install front oil seal in

12 P2604247 input shaft cover
(ZF S6 36,S5 36)

127
 Gearbox
SL.NO AL Part No SMT Photo application description

Basic tool

To be used with
appropirate
gripping tool to remove
13 P2604347
counter shaft taper
roller bearings
(ZF S6 36,S5 36)

Griping tool input end

To remove counter shaft

14 P3408847 front bearing
(ZF S6 36,S5 36)

128
 Gearbox
SL.NO AL Part No SMT Photo application description

Griping tool output end

To remove counter shaft

15 P3408947
rear bearing(ZF S6 36 ,S5 36)

Hollowtube s ZF GB

Used for pressing

mainshaft
16 P2612147
gears on to main shaft
(ZF S6 36,S5 36)

129
 Gearbox
SL.NO AL Part No SMT Photo application description

Alingment tool GB
Main counter

To align main shaft and

17 P2612247 counter shaft assy
together(ZF S6 36,S5 36)

Potective sleeve

To protect the selector

housing oil seal while
18 P2603847
inserting
the shaft(ZF S6 36,S5 36)

130
 Gearbox
SL.NO AL Part No SMT Photo application description

Pusher counter shaft

To push counter
19 P9900091 shaft while
dismantling(AL GB13)

Extractor input shaft

To extract input shaft

20 P9900092
(AL GB13)

131
 Gearbox
SL.NO AL Part No SMT Photo application description

Drift counter shaft bear-

ing

To install counter shaft

21 P2803447
bearing(AL GB 13)

Holder assy.

Used while assembling main

22 P3405847
shaft gear(AL GB 13).

132
 Gearbox
SL.NO AL Part No SMT Photo application description

Main shaft puller for 6S

850 GB

Puller Main shaft Gear unit

23 P9900202 into the shell
(GB S5 36, S6 36 & S6 850)

Main shaft centraliser

To protect from bearing

damage in main shaft
24 P9900203
assembly
(GB S5 36, S6 36 & S6 850)

133
 Gearbox
SL.NO AL Part No SMT Photo application description

Drift for fitting / removing

roller pin from selector
assy

To remove roller pin (GB S5

25 P9900206
36, S6 36 & S6 850)

Installer-spigot
bearing M/S Assy

Thold GB output flange

26 P2804147 while tightening or loosen-
ing flangenut(AL GB 13)

134
 Gearbox
SL.NO AL Part No SMT Photo application description

Bearing cone puller

To remove bearing cone

27 P9900321
(GB 9S 75)

Drift selector shaft bush

To remove &refit bush

28 P9900322
(GB 9S 75)

135
 Gearbox
SL.NO AL Part No SMT Photo application description
Counter piece of
internal extractor

To extract counter piece

29 P9900323
(GB 9S 75)

Bearing cone puller

To remove bearing cone

30 P9900324
(GB 9S 75)

136
 Gearbox
SL.NO AL Part No SMT Photo application description

Fixture for range change

selector rod

Fixing fixture for radial

31 P9900325 fixing of range change
shift rail

Drift locking plate/shim

remover

To remove & refit shim

32 P9900326
(GB 9S 75)

137
 Gearbox
SL.NO AL Part No SMT Photo application description

Bearing gripping tool

To extract bearing
33 P9900327
(GB 9S 75)

Drift drive shaft baffle

plate

To remove &refit baffle

34 P9900328
plate (GB 9S 75)

138
 Gearbox
SL.NO AL Part No SMT Photo application description
Protecting sleeve /
Alinner

For centralising and

35 P9900329 protectingfrom damage.
(GB 9S 75)

Drift

To remove &refit bush

36 P9900330
(GB 9S 75)

139
 Gearbox
SL.NO AL Part No SMT Photo application description

Adaptor bearing gripping

tool and long pipe

Basic tool for holding

bearinggripping tool
37 P9900438
(GB 9S 75)

Drift ball sleeve

To remove & refit sleeve

38 P9900331
(GB 9S 75)

140
 Gearbox
SL.NO AL Part No SMT Photo application description

Grip gears on main shaft

To hold gears of main shaft

39 P9900332
(GB 9S 75)

output shaft seal

installer

To install seal in output

40 P9900333
shaft (GB 9S 75)

141
 Gearbox
SL.NO AL Part No SMT Photo application description

Dowel pin remover

Drift for removing dowel pin

41 P9900207 (GB 9S 75, 9S 109, S5 36, S6 36 &
S6 850)

Lifting hook lay shaft

To lift lay shaft from casing

42 P9900334
(GB 9S 75)

142
 Gearbox
SL.NO AL Part No SMT Photo application description

Basic tool for gripping

tool

To hold the gripping tools

43 P9900335
(GB 9S 75)

Bearing gripping tool

44 P9900336 To remove bearing (GB 9S 75)

143
 Gearbox
SL.NO AL Part No SMT Photo application description

Drift speedo shaft

sealing ring

To fit / remove the spedo

45 P9900208 sealing ring
(GB 9S 75, S5 36, S6 36 & S6 850)

Drift

To remove & refit bush

46 P9900337
(GB 9S 109)

144
 Gearbox
SL.NO AL Part No SMT Photo application description

Adoptor

To fit /remove scraper ring

47 P9900338
(GB 9S 109)

Drift

To remove & refit bush

48 P9900339
(GB 9S 109)

145
 Gearbox
SL.NO AL Part No SMT Photo application description

Lifting hook

To lift the range change

49 P9900340
assembly (GB 9S 109)

Protective sleeve

To protect the main shaft oil

50 P9900341
pipe(GB 9S 109)

146
 Gearbox
SL.NO AL Part No SMT Photo application description

Drift selector shaft bush

51 P9900342 To remove bush (GB 9S 109)

Lifting bolt assy

To lift main shaft assy from

52 P9900343
main casing (GB 9S 109)

147
 Gearbox
SL.NO AL Part No SMT Photo application description

Lifting hook

To align the selector fork

53 P9900344
(GB 9S 109)

Shim remover

54 P9900345 To remove shims (GB 9S 109)

148
 Gearbox
SL.NO AL Part No SMT Photo application description

Adoptor

Adapter for oil tube, main

55 P9900346
shaft at output

Gear box gear puller

Rings to be used with press

56 P9900347 for removing main shaft
gear (GB 9S 109)

149
 Gearbox
SL.NO AL Part No SMT Photo application description

Adoptor

57 P9900348 Adaptor 9S 109 ZF

Guide strip

58 P9900200 (GB S5 36, S6 36 & S6 850)

150
 Gearbox
SL.NO AL Part No SMT Photo application description

Protection ring

To protect parts getting

59 P9900201 damage (GB S5 36, S6 36 & S6
850)

Aluminium block for selec-

tor assy.

60 P9900205 Gear Box ZF S5-36 6-36, S6 850

151
 Gearbox
SL.NO AL Part No SMT Photo application description

Fixture

61 P9900350 Gear Box 9S 109 ZF

Shim

62 P9900351 Gear Box 9S 109 ZF

152
 Gearbox
SL.NO AL Part No SMT Photo application description

Drift

63 P9900352 To remove & fit oilseal

Aligner

To centralise shaft such

64 P9900353 that
parts not getting damaged

153
 Gearbox
SL.NO AL Part No SMT Photo application description

Bolt fixture

65 P9900354 For locking purpose

Adoptor

Adapter for oil tube, main

66 P9900355
shaft at output

154
 Gearbox
SL.NO AL Part No SMT Photo application description

Basic tool

Basic tool to hold the

67 P9900356
grippingtool

Gripping tool

68 P9900357 To remove bearing

155
 Gearbox
SL.NO AL Part No SMT Photo application description

Gripping tool

69 P9900358 To remove bearing

Gripping tool

70 P9900359 To remove bearing

156
 Gearbox
SL.NO AL Part No SMT Photo application description

Gripping tool

71 P9900360 To remove bearing

Ring

72 P9900349 Gear Box 9S 109 ZF

157
 Gearbox
SL.NO AL Part No SMT Photo application description

Flange holder

For Holding tne flange

Rigidly while tightening or
73 P2605147
loosening flange
nut(AL GB13)

Extractor companion
flange/pusher
main shaft

To extract companion
flangeand to push main
74 P2800947
shaft while
dismantling-AL GB 13

158
 Gearbox
SL.NO AL Part No SMT Photo application description

Adapter for Removing

Idler Gear Shaft

To remove the idler gear

shaft .
75 P9900641
SMT is used along with
sliding hammer P2607247

Removing PTO Adapter for

Eaton GB

76 P9900642 To remove the PTO adaptor

159
 Gearbox
SL.NO AL Part No SMT Photo application description

Adaptor

Adapter for oil tube, main

77 P9900376
shaft at output

Heating gun for bearing

Blower- To remove the

78 P2604447
jammed bearing

160
 Propeller Shaft
SL.NO AL Part No SMT Photo application description
Extractor centre
bearing (MDV)

To remove centrejoint bear-

1 P2600247
ing

Spanner centre joint

bearing

Spanner centre bearing

locknut-
2 P2600847
MDV. To loosen &tighten nut
propller shaft

161
 Rear Axle
SL.NO AL Part No SMT Photo application description

Rear Axle Hub Nut Spanner

1 P2615347
UTruck

Rear Axle Hub Nut Spanner

2 P2801047
8 ton & 10 Ton

162
 Rear Axle
SL.NO AL Part No SMT Photo application description

To be used with
0501011 -handle hub.
Oil seal outer(10TG)
Oil seal inner (8TG)
3 P9900102
Outer bearing
outer cone (10TG)
Inner bearing
outer cone (8TG)

TO BE USED WITH
0501011 - HANDLE, TO
4 P9900365 INSTALL INNER OIL SEAL
(10T) AND INNER BEARING
OUTER RACE (10T)

163
 Rear Axle
SL.NO AL Part No SMT Photo application description

Drift

5 P9900395 Drift Oil Seal Inner Hub

Handle (Drift) hub 8TG/10TG

To be used with respective

drifts or extractors for
6 P9900101 installing/extracting oil
seals and bearing cones
8 T & 10T

164
 Rear Axle
SL.NO AL Part No SMT Photo application description

Puller companion flange

To extract companion
flange (Rear Axle)
7 P2801947
STALLION 4X4 & 6X6
(Q109) & RS 145

Extractor

To be used with
0501011-handle,to extract
8 P9900105
hub outer bearing outer
cone (8TG)

165
 Rear Axle
SL.NO AL Part No SMT Photo application description

Spanner hub (long neck)

To tighten or loosen hub

9 P2600547
nut 8T & 10 T

Puller hub rear axle

To extract hub rear

10 P2610347
axleQ109

166
 Rear Axle
SL.NO AL Part No SMT Photo application description

Drift deflector.

11 P2610547 To install deflector Q109

Drift rear hub oil seal

To install oil seal on rear

12 P9900368
hub C100 & RS120

167
 Rear Axle
SL.NO AL Part No SMT Photo application description
Socket flange nut -RS 120
Drive head

To loosen & tighten the

13 P9900367
flange nut(RS 120)

Spanner hub nut

To tighten or loosen hub

14 P3404755
nut rear C100& 120

168
 Rear Axle
SL.NO AL Part No SMT Photo application description
Spanner spring 'U' Bolt nut
(Cargo)

To loosen or Tighten Spring

15 P3403155
U Bolt

Hub puller rear RS 120

To remove hub
16 P9900369
from axle-RS 120

169
 Rear Axle
SL.NO AL Part No SMT Photo application description
Inner bearing cup pressing
tool thrushaft

Inner bearing cuppressing

17 P9900214 tool thrushaft
(Q109, R149, SQR109 & R158)

Outer bearing pressing

tool

Outer bearing pressing tool

18 P9900216
(Q109, R149, SQR109 & R158)

170
 Rear Axle
SL.NO AL Part No SMT Photo application description
Oil seal pressing tool
thrushaft

Oil seal pressing tool

19 P9900217 thrushaft
(Q109, R149, SQR109 & R158)

Fork tool for spring com-

pression

Fork tool for spring

20 P9900218 compression
(Q109, R149, SQR109 & R158)

171
 Rear Axle
SL.NO AL Part No SMT Photo application description

Bearing cup pressing tool

differential
carrier

Bearing cup pressing tool

21 P9900219 differential carrier
(Q109, R149, SQR109 & R158)

Pinion bearing cup removal

tool inner/outer

Pinion bearing cup removal

22 P2618247 tool inner/outer
(Q109, R149, SQR109 & R158)

172
 Rear Axle
SL.NO AL Part No SMT Photo application description
Pinion bearing cup
removal tool

To remove pinion bearing cup

23 P9900098
(Q109, R149, SQR109 & R158)

Bearing cone pressing

tool differential

To press bearing cone in

24 P2618347 differential
(Q109, R149, SQR109 & R158)

173
 Rear Axle
SL.NO AL Part No SMT Photo application description
Bearing cone pressing
tool

To install bearing cone in

25 P9900099 differential
(Q109, R149, SQR109 & R158)

Bearing compressing tool

pinion
outer bearing

To press bearing cone in

26 P9900093 pinion outer bearing
(Q109, R149, SQR109 & R158)

174
 Rear Axle
SL.NO AL Part No SMT Photo application description

Pilot pressing tool

To press pilot bearing

27 P9900094 pressing tool
(Q109, R149, SQR109 & R158)

Pinion bearing cone press-

ing tool
inner/outer

To press pinion bearing cone

28 P9900095 inner/outer
(Q109, R149, SQR109 & R158)

175
 Rear Axle
SL.NO AL Part No SMT Photo application description

Drift for R149 Outer bear-

ing

To fit outer bearing

29 P9900096
(Q109, R149, SQR109 & R158)

Pinion bearing cup

removal tool

To remove pinion bearing cup

30 P9900098
(Q109, R149, SQR109 & R158)

176
 Rear Axle
SL.NO AL Part No SMT Photo application description

Pinion oil seal pressing

tool

To install oil seal in pinion

31 P9900097
(Q109, R149, SQR109 & R158).

Rear Axle Hub Nut

Spanner

Rear Axle Hub Nut Spanner U

32 P2614947 Truck 105A
(Q109, R149, SQR109 & R158).

177
 Rear Axle
SL.NO AL Part No SMT Photo application description

Input shaft oil seal press-

ing tool

Input shaft oil seal

33 P9900220 pressing tool
(Q109, R149, SQR109 & R158).

Input shaft bearing cone

pressing tool

Input shaft bearing cone

34 P9900221 pressing tool
(Q109, R149, SQR109 & R158).

178
 Rear Axle
SL.NO AL Part No SMT Photo application description

Bearing puller inner axle-

diff side gear

Bearing puller inner

35 P9900222 axlediff side gear
(Q109, R149, SQR109 & R158).

Puller roller brg.diff

To extract diff cage

36 P9900100 side taper
roller bearing(MDV RANGE)

179
 Rear Axle
SL.NO AL Part No SMT Photo application description
Thru shaft bearing cup
pressing tool thrust

To press the bearing cup

37 P9900215
(Q109, R149, SQR109 & R158).

Hub Nut Spanner

Hub nut spanner

38 P2608547
REAR AXLE 8T & 10T

180
 Rear Axle
SL.NO AL Part No SMT Photo application description

Drift

To be used with 0501011

handle, to install hub.
39 P9900103 Oil seal outer (8TG)
Outer bearing outer
cone(8TG)-(REAR AXLE 8T & 10T)

Extractor

To be used with
0501011-handle,to extract
40 P9900104
hub inner bearing outer
cone (10T)-REAR AXLE 8T & 10T

181
 Rear Axle
SL.NO AL Part No SMT Photo application description

Extractor

41 P9900364 To remove & refit -RA 8T & 10T

Fixture for pinion helical

gear tightening

To lock the helical gear

42 P9900378
(DANA 60SHOand DSHO44)

182
 Rear Axle
SL.NO AL Part No SMT Photo application description

Drift hub oil seal outer

hub

Hub outer hub oil seal

43 P9900396
installer -Drive head 90 S

Drift housing plug press-

ing tool

44 P9900385 housing plug pressing-TSRA

183
 Rear Axle
SL.NO AL Part No SMT Photo application description

swivel pin hitting tool

45 P9900386 Swivel pin hitting-TSRA

Shift fork pin pressing

tool

46 P9900387 Fork pin pressing -TSRA

184
 Rear Axle
SL.NO AL Part No SMT Photo application description

cup remover

47 P9900388 To remove bearing cup -TSRA

bearing puller

48 P9900389 To remove the bearing -TSRA

185
 Rear Axle
SL.NO AL Part No SMT Photo application description

cup remover

49 P9900391 To remove bearing cup -TSRA

bearing puller

50 P9900392 To remove the bearing -TSRA

186
 Rear Axle
SL.NO AL Part No SMT Photo application description

Puller companion flange

To remove the companion

51 P9900403
flange Drive head 90 S

Flange nut spanner

To remove the flange nut

52 P9900409
Drive head 60 S

187
 Rear Axle
SL.NO AL Part No SMT Photo application description

Adjusting tool

53 P9900384 Bearing Adjuster -TSRA

Holder assy

54 P9900390 To hold the flange -TSRA

188
 Rear Axle
SL.NO AL Part No SMT Photo application description
Puller Diff.case flange
Half LH

To remove the bearing

55 P9900410
(LH)-Drive head 60 S

Puller Diff.case flange

plain Half RH

To remove the bearing

56 P9900411
(RH)-Drive head 60 S

189
 Rear Axle
SL.NO AL Part No SMT Photo application description

Puller pilot bearing

To remove Pilot Bearing

57 P9900413
(Drive head 60 S)

Hub nut spanner

To remove the hub

58 P9900394
nut -Drive head 90 S

190
 Drive Head
SL.NO AL Part No SMT Photo application description

To remove Pilot Bearing

1 P9900397
(Drive head 90 S)

Drift Pinion Oil Seal

Drift Pinion Oil Seal

2 P9900405
(Drive head 90 S)

191
 Drive Head
SL.NO AL Part No SMT Photo application description

Bearing Adjuster

Bearing Adjuster
3 P9900412
(Drive head 60S)

Bearing Adjuster

Bearing Adjuster
4 P9900399
(Drive head 90S)

192
 Drive Head
SL.NO AL Part No SMT Photo application description

Flange holder

5 P9900408 Flange holder

Drift Pinion inner bearing

Drift Pinion inner bearing

6 P9900398
(Drive head 90 S)

193
 Drive Head
SL.NO AL Part No SMT Photo application description

Drift diff. brg

To install diff.side
7 P2610847
bearings(Q 109)

Drift oil seal pinion hsg

Drift oil seal pinion hsg.To

8 P2606947 install oil seal pinion
hsg(4x4).

194
 Drive Head
SL.NO AL Part No SMT Photo application description

Puller spigot brg.To

9 P2608747 extract pinion spigot
brg( 4 x 4)

Split puller pinion bearing

10 P2608847
( 4 x 4).

195
 Drive Head
SL.NO AL Part No SMT Photo application description

Drift inner outer brg.

pinion

Drift inner outer brg.pinion.

11 P2610447 To install inner and outer
bearing -pinion(4x4)

Socket flange nut -C 100

Drive head

To loosen & tighten the

12 P9900366
flangenut(C100)

196
 Drive Head
SL.NO AL Part No SMT Photo application description

Drift pinion shaft bearing

To install pinion shaft bear-

13 P2803647
ing (8T& 10T)

Drift inner seal rear hub

To instal inner oil seal in

14 P2803947
rear hub(8T &10T)

197
 Drive Head
SL.NO AL Part No SMT Photo application description

Pinion companion flange

puller

To extract companion
15 P2618147
flange (Rear Axle)

Spanner hub nut

To tighten or loosen hub

16 P3407447
nut(8T&10T)

198
 Drive Head
SL.NO AL Part No SMT Photo application description
socket flange nut Q109
drivehead

To loosen & tighten the

17 P2612447
flangenut(Q109)

Drift spigot brg.

To install spigot brg

18 P2606847
STALLION (4X4)

199
 Drive Head
SL.NO AL Part No SMT Photo application description

Restainer crown wheel

bolt

Restainer crown wheel bolt

19 P3401255
(C100&RS120)

Drift diff.case flanged

half(LH)

To install flanged half (LH)

20 P9900406
-Drive head 90 S

200
 Drive Head
SL.NO AL Part No SMT Photo application description
Drift diff.case flanged
half(R H)

To install flanged half (RH)

21 P9900404
-Drive head 90 S

Puller Diff.case Plain

half(RH) small bearing

To remove the small bearing

22 P9900402
(RH)-Drive head 90 S

201
 Drive Head
SL.NO AL Part No SMT Photo application description
Puller Diff.case flanged
half(LH) big bearing

To remove the big bearing

23 P9900401
(LH)-Drive head 90 S

Drift Spigot bearing

To install spigot bearing

24 P9900437
-Drive head 90 S

202
 captain tool
SL.NO AL Part No SMT Photo application description

1 P9900609 Pinion nut spanner 76AF

2 P9900608 Hub nut spanner 95AF

203
 Captain tool
SL.NO AL Part No SMT Photo application description

Drive head adjusting ring

3 P9900610
tool

V rod to axle tightening

4 P9900607
socket

204
 captain tool
SL.NO AL Part No SMT Photo application description

Pinion helical gear locking

5 P9900618
tool

6 P9900624 Hub inner oil seal installer

205
 Captain tool
SL.NO AL Part No SMT Photo application description

Hub end outer cone

7 P9900612
removing

Hub inner cone removing

8 P9900615
tool

206
 captain tool
SL.NO AL Part No SMT Photo application description

Diff case bearing

9 P9900619
pressing tool

Pole wheel oil seal drift

10 P9900613
and base (Removing)

207
 Captain tool
SL.NO AL Part No SMT Photo application description

11 P9900626 Cage for Captain rear axle

12 P9900628 Hub inner cone installer

208
 captain tool
SL.NO AL Part No SMT Photo application description

13 P9900627 Hub outer cone installer

14 P9900614 Bevel gear bearing installer

209
 Captain tool
SL.NO AL Part No SMT Photo application description

3rd Differential End

15 P9900620
Cone Fitting Tool

3rd Differential End Cone

16 P9900630
Removal Tool

210
 captain tool
SL.NO AL Part No SMT Photo application description

Puller for diff. case big

17 P9900611
bearing

18 P9900623 Pinon cone pressing tool

211
 Captain tool
SL.NO AL Part No SMT Photo application description

19 P9900617 Puller for pinion bearing

20 P9900621 IP Shaft cone pressing Tool

212
 captain tool
SL.NO AL Part No SMT Photo application description

Diff. Cage bearing presing

21 P9900622
tool( rear rearaxle)

Puller for drive head

bevel bearing & Puller for
22 P9900616
diff. case bearing
(longer side)

213
 Captain tool
SL.NO AL Part No SMT Photo application description

Special spanner to remove

23 P9900629
crown wheel bolts

24 P9900625 Crown Seating tool

214
 captain tool
SL.NO AL Part No SMT Photo application description

Pinion bearing installer

25
(hollow tube used in ZF GB)

Multi Purpose Hydraulic

General Jack
26
tool Supplied with JanBus/Captain/
ZF9S1110

215
 Captain tool
SL.NO AL Part No SMT Photo application description

General 3 Jaw puller common for JAN

27
tool bus and Captain

216
 Janbus tools
SL.NO AL Part No SMT Photo application description

3 JAW PULLER FOR HUB WITH

1 P9900572
DISTANCE PIECE

2 P9900580 TOOL FOR ADJUSTMENT NUT

217
 janbus tools
SL.NO AL Part No SMT Photo application description

BEARING CONE REMOVAL AT

3 P9900573
HUB OS SIDE

4 P9900587 PULLER FOR PINION BEARING

218
 Janbus tools
SL.NO AL Part No SMT Photo application description

5 P9900586 CROWN WHEEL BEARING PULLER

DRIFT BEARING CONE FITMENT AT

6 P9900571
HUB-OS SIDE

219
 janbus tools
SL.NO AL Part No SMT Photo application description

7 P9900571 DRIFT FOR CONE AT HUB WB END

8 P9900584 DRIFT FOR CONE AT HUB WB END

220
 Janbus tools
SL.NO AL Part No SMT Photo application description

9 P9900583 DRIFT FOR PINION BEARING

DRIFT FOR REMOVING OILSEAL

10 HUB END
(USED FOR REAR AXLE)

221
 janbus tools
SL.NO AL Part No SMT Photo application description

11 P9900589 DRIFT FOR HUB OIL SEAL

12 P9900582 HUB FITTING TOOL

222
 Janbus tools
SL.NO AL Part No SMT Photo application description

13 P9900577 HUB NUT SOCKET

14 P9900509 OIL SEAL DRIFT PINION END

223
 janbus tools
SL.NO AL Part No SMT Photo application description

15 P9900570 Torque breaker

P9900568 Torque breaker holder

224
 Janbus tools
SL.NO AL Part No SMT Photo application description

55mm Socket for PINION

P9900581 FLANGE HOLDER WITH TORQUE
BREAKER FOR PINION NUT

REMOVAL OF CONE AT
16 P9900575
HUB WB END

225
 janbus tools
SL.NO AL Part No SMT Photo application description

REMOVAL OF CONE - PINION BIG

17 P9900576
BEARING

REMOVAL OF CONE - PINION

18 P9900574
SMALL BEARING

226
 Janbus tools
SL.NO AL Part No SMT Photo application description

SPECIAL CIRCLIP PLIER

19 P9900569
(MULTI PURPOSE)

Multi Purpose Hydraulic

Jack (OPTIONAL)
20
Available in open market/
Will be supplied by olympics

227
 janbus tools
SL.NO AL Part No SMT Photo application description

P9900506/ SMT with Pulley for

21
P9900507 Removing GB from vehicle

228
 Steering
SL.NO AL Part No SMT Photo application description
Puller steering wheel
comet

To extract the
1 P2600147
steering wheel(Rane)

puller drop arm -

MDV& LCV

To extract the drop

2 P2600647
arm(Rane)

229
 Steering
SL.NO AL Part No SMT Photo application description

Puller drop arm POWER

STEERING

3 P2616947 To extract drop arm (ZF)

Spanner power steering

nut

To loosen or tighten rocker

4 P2617047
shaft nut (ZF).

230
 Steering
SL.NO AL Part No SMT Photo application description

Spanner drop arm nut type

3121

To loosen or tighten rocker

5 P9900213
shaft nut (ZF) -3121.

Puller steering wheel

-Cargo LCV

To extract the
6 P2612647
steering wheel (RANE).

231
 Steering
SL.NO AL Part No SMT Photo application description

Puller drop arm

7 P2612747 To extract drop arm(RANE)

Spanner nut drop arm

To loosen or tighten rocker

8 P2612847
shaft nut(RANE).

232
 Steering
SL.NO AL Part No SMT Photo application description

Spanner set rocker shaft

To adjust the rocker shaft

9 P2600947
bolt and nut(RANE).

233
 Boss
SL.NO AL Part No SMT Photo application description

Drift for inner race in-

staller

To install the hub inner race

1 P9900142
(BOSS).

Drift for fixing flange cup

Drift for fixing flange cup

2 P9900178
(BOSS)

234
 Boss
SL.NO AL Part No SMT Photo application description

Tool bearing adjuster

long

Tool bearing adjuster

3 P9900148
long(BOSS)

Drift - Fixing Diff Bearing

RH

Drift for fixing differential

4 P9900149
bearing RH(BOSS)

235
 Boss
SL.NO AL Part No SMT Photo application description

Drift - Fixing Diff Bearing

LH

Drift for fixing differential

5 P9900150
bearing LH(BOSS)

Drift - pinion race

Drift for fixing pinion

6 P9900151
bearing race(BOSS)

236
 Boss
SL.NO AL Part No SMT Photo application description

Drift Oil Seal

7 P9900153 Drift pinion oil seal(BOSS)

Drift for Pinion Housing

Bearing Race

To removing pinion
8 P9900154
housing race(BOSS)

237
 Boss
SL.NO AL Part No SMT Photo application description

Puller for Pinion nose

(pilot) bearing

Puller for Pinion nose

10 P9900176
(pilot) bearing (BOSS)

Puller for Diff bearing RH

side

Puller for Diff bearing RH

11 P9900177
side(BOSS)

238
 Boss
SL.NO AL Part No SMT Photo application description

Puller - pinion taper

roller bearing

1.To remove the taper roller

bearing from pinion(BOSS)
12 P9900179
2. Eaton main shaft pilot
bearing removing

Drift - Fixing Nose (Pilot)

bearing

Drift for fixing nose (pilot)

13 P9900146
Bearing(BOSS)

239
 Boss
SL.NO AL Part No SMT Photo application description
Puller for Diff bearing LH
side

Puller for Diff bearing LH

14 P9900175
side(BOSS)

Flange Cup remover

15 P9900180 Flange Cup remover(BOSS)

240
 Boss
SL.NO AL Part No SMT Photo application description
Stand Pinion House
Removing

Stand Pinion House

16 P9900181
Removing(BOSS),

Drift - Removing inner &

outer race

Drift for removing inner

17 P9900147
bearing outer race(BOSS)

241
 Boss
SL.NO AL Part No SMT Photo application description

Drift Inner Race

Installer

18 P9900155 To install inner race(BOSS)

Bunk for Inner bearing

To install Inner bearing

19 P9900182
(Hollow tube)-BOSS

242
 Boss
SL.NO AL Part No SMT Photo application description

Bunk for outer bearing

To install outer bearing

20 P9900183 For Boss 12T Rear
axle-(BOSS)

Drift Inner oil seal

Installer

Drift outer oil seal

21 P9900157
installer(BOSS)

243
 Boss
SL.NO AL Part No SMT Photo application description

Drift for outer race

To install hub outer race

22 P9900156
(BOSS)

Drift for outer race re-

moval

23 P9900185 To remove outer race (BOSS)

244
 Boss
SL.NO AL Part No SMT Photo application description
Drift for inner race re-
moval

24 P9900184 To inner outer race (BOSS)

Front axle

Hub Nut Spanner

P9900159 Hub nut spanner-(BOSS)

245
 Boss
SL.NO AL Part No SMT Photo application description

Drift Kingpin Bush

removal

Drift king pin bush

25 P9900166
removal (BOSS)

Puller for Inner bearing

removal.

Puller for Inner bearing

26 P9900186
removal(BOSS).

246
 Boss
SL.NO AL Part No SMT Photo application description

oil seal removal tool

To remove oil seal from

27 P9900187
hub(BOSS)

Hub outer bearing

installing tool

Hollow tube to install hub

28 P9900188
outer bearing(BOSS)

247
 Boss
SL.NO AL Part No SMT Photo application description

Drift - removing hub

Outer Race

To remove hub outer race

29 P9900160
(BOSS)

Drift Fixing Outer Race

To install hub Outer race

30 P9900161
(BOSS).

248
 Boss
SL.NO AL Part No SMT Photo application description
Drift - Removing inner
race

To remove hub inner race

31 P9900162
(BOSS)

Drift Oil seal Installer

32 P9900164 To install hub oil seal (BOSS)

249
 Boss
SL.NO AL Part No SMT Photo application description

Pusher Track rod ball pin

To remove track rod

33 P9900165
ball pin(BOSS)

Drift - Fixing inner &

outer race

Drift for fixing inner &

34 P9900163
Outer race(BOSS)

250
 Boss
SL.NO AL Part No SMT Photo application description

Shim centraliser

To centralise all bores and

35
shims in line(BOSS)

Hub bearing centralizer

(For inner)

Hub bearing
36 P9900189
centralizer(For inner) -BOSS

251
 Boss
SL.NO AL Part No SMT Photo application description
Drift outer oil seal
Installer

Drift inner oil seal

37 P9900158
installer(BOSS)

puller for pinion nose

(pilot)bearing

To install Pinion nose(pilot)

38 P9900144
bearing (BOSS)

252
 Boss
SL.NO AL Part No SMT Photo application description

Other system tool

39 P9900160 Fan Mounting adaptor(BOSS)

Drop arm Nut spanner

40 P9900173 Drop arm Nut spanner(BOSS)

253
 Boss
SL.NO AL Part No SMT Photo application description

Spring eye Bushing -

OD 40& OD 16

NGICV Spring eye bushing

41 P9900167 tool - for OD 40 & ID 16 bush
(BOSS)

Spring eye Bushing -OD 50&

OD 20

NGICV Spring eye bushing

42 P9900168 tool - for OD 50 & ID 20 bush
(BOSS)

254
 Boss
SL.NO AL Part No SMT Photo application description

Spring eye Bushing -OD 60&

OD 22

NGICV Spring eye bushing

43 P9900169 tool - for OD 60 & ID 22 bush
(BOSS)

Spring eye
Bushing mandrel ID 16

NGICV Spring eye bushing

44 P9900170
Mandrel for ID 16mm(BOSS)

255
 Boss
SL.NO AL Part No SMT Photo application description

NGICVSpring eye
Bushing mandrel for ID 20

NGICV Spring eye bushing

45 P9900171
Mandrel - for ID 20mm(BOSS)

Spring eye Bushing

mandrel -ID22

NGICV Spring eye bushing

46 P9900172
Mandrel - for ID 22mm(BOSS)

256
 Boss
SL.NO AL Part No SMT Photo application description

puller for Diff bearing LH

side

To remove Diff bearing LH

47 P9900143
side(BOSS)

puller for Diff bearing RH

side

To remove Diff bearing RH

48 P9900145
side(BOSS)

257
 Boss
SL.NO AL Part No SMT Photo application description

Engine lifting Tackle

49 P9900317 To lift a engine

Wind shield removing tool

50 P9900453 To remove a wind shield

258
 Cabin
SL.NO AL Part No SMT Photo application description

Extracter /Installer bush

cargo cab mounting rear.
1 P2612347
To extract or install cabin
rear mounting bushes.

Extractor /Installer bush

cargo cab mounting rear.
2 P2612947
To extract and install cabin
front mounting bushes

259
 Stand
SL.NO AL Part No SMT Photo application description

H-SERIES 6D Engine Rotating

H-SERIES 6D Engine Rotating
1 P2609547 Stand
Stand

ZF Gear Box Assembly ZF Gear Box Assembly

2 P9900417
Stand S6 -36 Stand S6 -36

260
 Stand
SL.NO AL Part No SMT Photo application description

9S 109 9S 1110 Gear Box As- 9S 109 9S 1110 Gear Box

3 P9900418
sembly Stand Assembly Stand

4 P9900371 MDV Drive Head Assy Stand MDV Drive Head Assy Stand

261
 Stand
SL.NO AL Part No SMT Photo application description

Neptune Engine Rotating Neptune Engine N4 & N6

5 P9900372
Stand Rotating Stand

Drive Head Assy Rotating Drive Head Assy

6 P9900407
Stand Rotating Stand

262
 Stand
SL.NO AL Part No SMT Photo application description
Lifting Trolley 6S &
AL gear box

Lifting Trolley 6S & AL

7 P2611147
gear box

H-SERIES 6D/4D Engine H-SERIES 6D/4D Engine

8 P9900415
Assy Rotating Stand Assy Rotating Stand

263
 Stand
SL.NO AL Part No SMT Photo application description

MDV Rear Axle

9 P9900421 MDV Rear Axle Stand Comet
Stand Comet

Engine Removing
and Refixing Trolley
370/6.65/402/412,H-SERIES

Engine Removing and Refixing

10 P9900424 Trolley 370/6.65/402/412,
H-SERIES

264
 Stand
SL.NO AL Part No SMT Photo application description

Mag Brake Holding Mag Brake

11 P9900425
Fixture Holding Fixture

Neptune Engine Proto

Assy Stillage

Neptune Engine Proto

12 P9900427
Assy Stillage

265
 Stand
SL.NO AL Part No SMT Photo application description

Neptune Engine Removing Neptune Engine Removing

13 P9900428
& Refixing Trolley & Refixing Trolley

Neptune Lifing Hook

14 P9900429 Neptune Lifing Hook

266
 Stand
SL.NO AL Part No SMT Photo application description

Oil Seal Pusher Plate

15 P9900420 oil seal pusher plate (brake)

STG Box MDV Stand (Rane)

16 P9900423 STG Box MDV Stand (Rane)

267
 Stand
SL.NO AL Part No SMT Photo application description

Front Axle MDV Front Axle MDV

17 P9900422
Assy Stand Comet Assy Stand Comet

Auxillary gear box

Bracket

18 P9900432 Auxillary gear box Bracket

268
 Stand
SL.NO AL Part No SMT Photo application description

Gear box Trolley FAT 6*6

19 P9900433 Gear box Trolley FAT 6*6

FORM GAUGE

Tool check bend for on the

20 P9900540
RH & LH FSM

269
 Stand
SL.NO AL Part No SMT Photo application description
Assy stand for
Electronic Brake circuit

Assy stand for Electronic

21 P2616247
Brake circuit

9S 109 gear box trolley

22 P2604547 9S 109 gear box trolley

270
 General tools
SL.NO AL Part No SMT Photo application description

Removal of Main shaft &

1 G1
counter shaft bearings

Multi purpose tool used

2 G2
with bearing puller

271
 General tools
SL.NO AL Part No SMT Photo application description

Removal of snap rings on

3 G3
main shaft of Eaton GB

272
•
•